WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/d-link/DES3028P-L2MGMT-MIB

5398 lines
183 KiB
Plaintext
Raw Blame History

-- -----------------------------------------------------------------------------
-- MIB NAME : L2 Management MIB
-- FILE NAME: L2mgmtDes30xx.mib
-- DATE : 2010/08/03
-- VERSION : 2.16
-- PURPOSE : To construct the MIB structure for L2 Management of the switch
-- for proprietary enterprise
-- -----------------------------------------------------------------------------
-- MODIFICATION HISTORY:
-- -----------------------------------------------------------------------------
-- Version, Date, Author
-- Description:
-- [New Object]
-- [Modification]
-- Notes: (Requested by who and which project)
-- -----------------------------------------------------------------------------
-- Version 2.16, 2010/08/03, Marco Visaya
-- [New Object]
-- Add swL2FloodMAC
-- -----------------------------------------------------------------------------
-- Version 2.15, 2010/06/25, Marco Visaya
-- [New Object]
-- Add DDM to swL2PortErrPortReason
-- -----------------------------------------------------------------------------
-- Version 2.14, 2009/12/06, Eli Lin
-- [New Object]
-- Add swL2DevCtrlTelnetState
-- -----------------------------------------------------------------------------
-- Version 2.13, 2009/10/22, Eli Lin
-- [New Object]
-- Add swL2PortLoopOccurred, swL2PortLoopRestart and swL2LoopDetectTrapMode
-- for loop back detection
-- -----------------------------------------------------------------------------
-- Version 2.12, 2009/10/22, Eli Lin
-- [New Object]
-- Add swL2DevCtrlWeb and swL2DevCtrlWebState
-- -----------------------------------------------------------------------------
-- Version 2.11, 2009/07/06, Eli Lin
-- [New Object]
-- Add swL2FloodMacDetectedTrap, swL2FloodMacDetectedMacVid
-- swL2FloodMacDetectedMacAddress for the flooding MAC function
-- [Modification]
-- Revise swl2PortSecurityBidings to swl2PortSecurityBindings
-- Revise swl2NotificationBidings to swl2NotificationBindings
-- -----------------------------------------------------------------------------
-- Version 2.10, 2008/10/14, Marco Visaya
-- added 'other' option to swL2PortCtrlMDIXState
-- -----------------------------------------------------------------------------
-- Version 2.09, 2008/09/26, Marco Visaya
-- added swL2QOS8021pRadiusPriority
-- -----------------------------------------------------------------------------
-- Version 2.08, 2008/09/12, Marco Visaya
-- added swL2QOSBandwidthRadiusRxRate
-- added swL2QOSBandwidthRadiusTxRate
-- swL2DhcpRelayMgmt made obsolete (use DHCP-RELAY-MGMT-MIB)
-- -----------------------------------------------------------------------------
-- Version 2.07, 2008/08/12, Marco Visaya
-- modified index of swL2IGMPAccessAuthTable
-- -----------------------------------------------------------------------------
-- Version 2.06, 2008/07/07, Marco Visaya
-- added swL2IGMPDynIPMultVlanState
-- added swL2IGMPDynIPMultVlanAge
-- added swIGMPSnoopingGroupReportCount
-- added swIGMPSnoopingGroupUpTime
-- added swIGMPSnoopingGroupExpiryTime
-- added swIGMPSnoopingGroupRouterPorts
-- added swL2IGMPDynIpMultMgmt
-- -----------------------------------------------------------------------------
-- Version 2.05, 2008/05/30, Marco Visaya
-- added swL2TrunkVLANTable
-- added swL2DevCtrlVLANTrunkState
-- -----------------------------------------------------------------------------
-- Version 2.04, 2008/05/29, Marco Visaya
-- added swL2IGMPSnoopingMulticastVlanState
-- added swL2IGMPMulticastVlanTable
-- added swL2IGMPMulticastVlanGroupTable
-- added swL2IGMPv3Table
-- added swIGMPSnoopingGroupTable
-- -----------------------------------------------------------------------------
-- Version 2.03, 2008/05/22, Marco Visaya
-- add swL2IGMPAccessAuthTable
-- -----------------------------------------------------------------------------
-- Version 2.02, 2008/03/25, Marco Visaya
-- add swL2DhcpLocalRelayMgmt
-------------------------------------------------------------------------------
-- Version 2.01, 2008/03/07, Marco Visaya
-- add swL2IGMPRouterPortForbiddenPortList
-------------------------------------------------------------------------------
-- Version 2.00, 2008/01/22, Marco Visaya
-- add swL2PortCtrlMDIXState for new feature request
-- configure MDIX setting of port
-------------------------------------------------------------------------------
-- Version 1.06, 2007/2/22, Marco Visaya
-- Add swL2DevCtrlAsymVlanState
-------------------------------------------------------------------------------
-- Version 1.05, 2007/1/28,Marco Visaya
-- Add s2L2VlanMultiply*
-------------------------------------------------------------------------------
-- Version 1.04, 2007/1/23,Grace Liu
-- Add swL2DevCtrlLLDPState
-------------------------------------------------------------------------------
-- Version 1.03, 2007/12/01, Peter Hsieh
-- Add swL2VlanAdvertisementTable swL2LoopDetectMgmt, swL2MultiFilter
-------------------------------------------------------------------------------
-- Version 1.02, 2005/4/8, Scott Slong
-- Add swL2DevCtrlManagementVlanId
-------------------------------------------------------------------------------
-- Version 1.01, 2004/9/21, Karen Huang
-- Add swL2PortCableDiagnosisTable
-------------------------------------------------------------------------------
-- Version 1.00
-- Remove swDevInfoSystemUptime, swDevInfoConsoleInuse,swL2DevCtrlUpDownloadState,swDevInfoSaveCfg
-- Remove swL2DevCtrlUpDownloadImageFileName ,swL2DevCtrlUpDownloadImageSourceAddr
-- Remove swL2DevCtrlUpDownloadImage , swL2DevCtrlSaveCfg
-------------------------------------------------------------------------------
-- Version 0.02, 2002/07/30, Tommy Wang
-- Renamed to DXxxxxx-MIB
-- Add swL2TrafficMgmt
-- Modified swL2DevCtrl
-- Removed swL2PortStTable
-- Removed swL2PortCtrlEntry->swL2PortCtrlBackPressState and
-- swL2PortCtrlBMStromthreshold
-- Modified swL2MirrorMgmt
-- Removed swL2FilterAddrVid
-- Modified swL2IGMPCtrlTable
-- Removed swL2PriorityMgmt
-- Modified swL2TrunkMasterPortIndex MAX-ACCESS read-only to read-write
-- Add swL2IGMPCtrState for invalid(4)
-- Modified swL2PortInfoType
-- Removed swDevInfoFrontPanelLedStatus about RPS and modified its SIZE
-- Removed swL2TrafficMgmt
-------------------------------------------------------------------------------
-- Version 0.01, 2000/07/03,Chrissy Chen
-- Removed swL2PortTxPrioQueueCtrlTable
-- Modified swL2PortCtrlBMStromPercentage to swL2PortCtrlBMStromthreshold
--
-------------------------------------------------------------------------------
DES3028P-L2MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-IDENTITY,OBJECT-TYPE,
Unsigned32,Integer32,TimeTicks FROM SNMPv2-SMI
IpAddress FROM RFC1155-SMI
RowStatus,TruthValue FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
DisplayString FROM RFC1213-MIB
des3028p FROM SWPRIMGMT-DES30XXP-MIB;
swL2MgmtMIB MODULE-IDENTITY
LAST-UPDATED "1008030000Z"
ORGANIZATION "D-Link, Inc."
CONTACT-INFO
"http://support.dlink.com"
DESCRIPTION
"The Structure of Layer 2 Network Management Information for enterprise."
::= {des3028p 2}
VlanId ::= INTEGER (1..4094)
PortList ::= OCTET STRING(SIZE (0..127))
MacAddress ::= OCTET STRING(SIZE(6)) -- A 6 octet address
-- in the "canonical"
-- order, copy from RFC1493
-- Textual Convention for PortList
-- Define the PortList, comes from RFC2674
swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
-- lagMIBObjects OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
swIGMPPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
-- swPortRatePackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
-- swPortBindingPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
-- swPortBaseVlanMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
--swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 }
-- swPriToTrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
-- loadPortSegmentation OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
--swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 }
--swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 19 }
swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 20 }
swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 21 }
swL2MultiFilter OBJECT IDENTIFIER ::= { swL2MgmtMIB 22 }
swL2VlanMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 23 }
swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 }
swL2FloodMAC OBJECT IDENTIFIER ::= { swL2MgmtMIB 25 }
--*****************************
-- add by ynot for lag
-- dot3adAggrPortMgmt OBJECT IDENTIFIER ::= { lagMIBObjects 1 }
-- add for load traffic
--******************************
-- ********************************************************************
-- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
-- ********************************************************************
swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 }
--swL2DevInfoSystemUpTime OBJECT-TYPE
-- SYNTAX TimeTicks
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of sysUpTime at the time the switch entered its
-- current operational state. If the current state was entered
-- prior to the last re-initialization, then this object contains
-- a zero value. This value is in units of seconds."
-- ::= { swL2DevInfo 1 }
-- swL2DevInfoTotalNumOfPort OBJECT-TYPE
-- SYNTAX INTEGER (0..255)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The number of ports within this switch. This value is the sum
-- of the ports within this switch."
-- ::= { swL2DevInfo 2 }
-- swL2DevInfoNumOfPortInUse OBJECT-TYPE
-- SYNTAX INTEGER (0..255)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The number of ports in this switch connected to the segment or
-- the end stations."
-- ::= { swL2DevInfo 3 }
-- swL2DevInfoConsoleInUse OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- in-use(2),
-- not-in-use(3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This usage indication of console system."
-- ::= { swL2DevInfo 4 }
swL2DevInfoFrontPanelLedStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of system LED indications.
When log in system DES3028/DES3052 which do not support POE, the first
two octets is defined as system LED. The first LED is power LED. The
second LED is console LED.
When log in system DES3028p/DES3052p which support POE, the first
four octets are defined as system LED. The first octet is 0x02 and the
second octet is 0x01 when in normal mode. Contrarily, the first octet
is 0x01 and the second octet is 0x02 when in poe mode. The third octet
indicates the power LED. The fourth octet indicates the console LED.
The other octets are defined as follow:
start on the third or fifth octets separately correspond to system support
poe or system which does not support poe indicate the logical port LED
(following swL2BasePort ordering). Every two bytes are presented to a port.
The first byte is presentd to the Link/Activity LED. The second byte is
presented to the Speed LED.
Link/Activity LED :
The most significant bit is used for blink/solid:
8 = The LED blinks.
The second significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The four remaining bits are currently unused and must be 0."
::= { swL2DevInfo 5 }
--swL2Module-1-Type OBJECT-TYPE
-- SYNTAX INTEGER {
-- none(0),
-- moduleType-DEM-301T(1),
-- moduleType-DEM-201F(2),
-- moduleType-DEM-301G(3),
-- moduleType-COMBA(4),
-- moduleType-DEM-201FL(5)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the module type."
-- ::= { swL2DevInfo 6 }
--
--swL2Module-2-Type OBJECT-TYPE
-- SYNTAX INTEGER {
-- none(0),
-- moduleType-DEM-301T(1),
-- moduleType-DEM-201F(2),
-- moduleType-DEM-301G(3),
-- moduleType-COMBA(4),
-- moduleType-DEM-201FL(5)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the module type."
-- ::= { swL2DevInfo 7 }
--
--***************************************************************************************************************
--swL2CPUutilization OBJECT IDENTIFIER ::= { swL2DevMgmt 3 }
-- swL2CPUutilizationIn5sec OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Time scale is 5 seconds.The value will be between 0%(idle) and 100%
-- (very busy)."
-- ::= { swL2CPUutilization 1 }
--
-- swL2CPUutilizationIn1min OBJECT-TYPE
-- SYNTAX Integer32
--
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Time scale is 1 minute.The value will be between 0%(idle) and 100%
-- (very busy)."
-- ::= { swL2CPUutilization 2 }
--
-- swL2CPUutilizationIn5min OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Time scale is 5 minute.The value will be between 0%(idle) and 100%
-- (very busy)."
-- ::= { swL2CPUutilization 3 }
-- *******************************************************
swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 }
swL2DevCtrlSystemReboot OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reboot(2),
save-config-and-reboot(3),
reboot-and-load-factory-default-config(4)
-- reboot-and-load-factory-default-config-except-ip-address(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the agent system reboot state. The agent always
returns other(1) when this object is read."
::= { swL2DevCtrl 1 }
swL2DevCtrlSystemIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates system ip."
::= { swL2DevCtrl 2 }
swL2DevCtrlSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates system subnet mask."
::= { swL2DevCtrl 3 }
swL2DevCtrlDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates system default gateway."
::= { swL2DevCtrl 4 }
swL2DevCtrlManagementVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls which Vlan includes system ip. And the Vlan
should have been created."
::= { swL2DevCtrl 5 }
-- swL2DevCtrlStpState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object can be enabled or disabled spanning tree algorithm
-- during runtime of the system."
-- ::= { swL2DevCtrl 6 }
swL2DevCtrlIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates layer 2 Internet Group Management Protocol
(IGMP) capture function is enabled or disabled ."
::= { swL2DevCtrl 7 }
-- swL2DevCtrlBcastStormCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates broadcast storm control function is enabled or
-- disabled. The swL2PortCtrlBMDStormLimit object will descript the
-- detail about the storm control ."
-- ::= { swL2DevCtrl 8 }
--swL2DevCtrlMcastStormCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates multicast storm control function is enabled or
-- disabled. The swL2PortCtrlBMDStormLimit object will descript the
-- detail about the storm control ."
-- ::= { swL2DevCtrl 9 }
--swL2DevCtrlDestLookupFailureCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates destination lookup failure rate control function
-- is enabled or disabled. The swL2PortCtrlBMDStormLimit object will
-- descript the detail about the storm control ."
-- ::= { swL2DevCtrl 10 }
-- swL2DevCtrlBMDStormLimit OBJECT-TYPE
-- SYNTAX INTEGER (0..262143)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object to decide how many broadcast/multicast (depend on
-- swL2DevCtrlBcastStormCtrl, swL2DevCtrlMcastStormCtrl or
-- swL2DevCtrlDestLookupFailureCtrlobjects whether is enabled) packets per second
-- will pass thru. Beyond the limit, the device will start dropping
-- that type of packet until the second interval has expired . Once the time
-- interval has expired , the device will start forwarding that type of packet."
-- ::= { swL2DevCtrl 11 }
swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the object is set to active, all the statistic counters will be cleared.
If set to normal, do nothing."
::= { swL2DevCtrl 12 }
swL2DevCtrlSnmpEnableAuthenTraps OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the SNMP entity is permitted to generate
authenticationFailure traps. The value of this object
overrides any configuration information; as such, it
provides a means whereby all authenticationFailure traps may
be disabled.
Note that it is strongly recommended that this object be
stored in non-volatile memory so that it remains constant
across re-initializations of the network management system."
::= { swL2DevCtrl 13 }
-- swL2DevCtrlFilterEAPOLPDU OBJECT-TYPE
-- SYNTAX INTEGER { yes(1), no(2) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicates whether to filter the EAPOL PDU. If the administrative
-- state for Port Access Control in a System is enabled, this object
-- is meaningless. Otherwise, when this object is yes(1), the EAPOL
-- packets will be dropped. When this object is no(2), the EAPOL
-- packets will pass."
-- ::= { swL2DevCtrl 14 }
--swL2DevCtrlTrafficSegmentation OBJECT-TYPE
-- SYNTAX INTEGER { enabled(1), disabled(2) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "If this object is disabled(2), then no traffic segmentation.
-- When we set it to enabled(1), there are three conditions for the
-- traffic segmentation.
-- (1) If without plugging in option module, port 1 is the server port.
-- (2) If plugging in one-port module, the port on the module is the
-- server port.
-- (3) If plugging in two-port module, these two ports on the module are
-- the server ports.
-- Under this situation, other ports(Client ports) can only communicate
-- with the server port. Client ports can't communicate with each other."
-- ::= { swL2DevCtrl 15 }
swL2DevCtrlRmonState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be enabled or disabled RMON."
::= { swL2DevCtrl 16 }
swL2DevCtrlIpAutoConfig OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of automatically getting configuration from TFTP server on device"
::= { swL2DevCtrl 17 }
-- swL2PortCtrlMulticastfilter OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(0),
-- forward-all-groups(1),
-- forward-unregistered-groups(2),
-- filter-unregistered-groups(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object decide the multicast packets filtering mode on all port . "
-- ::= { swL2DevCtrl 18 }
swL2MACNotifyState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enabled or disabled MAC Notification."
::= { swL2DevCtrl 19 }
swL2MACNotifyHistorySize OBJECT-TYPE
SYNTAX INTEGER (1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the history size of variation MAC in address table.
The default value is 1 ."
::= { swL2DevCtrl 20 }
swL2MACNotifyInterval OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the time interval in second for trigger the MAC notify message. "
::= { swL2DevCtrl 21 }
swL2DevCtrlLLDPState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the state of the LLDP function.
When this function is enabled, the switch can start to transmit
LLDP packets and receive and process the LLDP packets.
The specific function of each port will depend on the per port
LLDP setting.
For the advertisement of LLDP packets, the switch announces the
information to its neighbor through ports. For the receiving of
LLDP packets, the switch will learn the information from the LLDP
packets advertised from the neighbor in the neighbor table.
"
::= { swL2DevCtrl 22 }
swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When lldp is disabled and lldp forward_message is enabled, the received
LLDP Data Units packet will be forwarded. "
DEFVAL {disabled}
::={swL2DevCtrl 23}
swL2DevCtrlAsymVlanState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables the asymmetric VLAN feature of the device."
::= { swL2DevCtrl 24 }
swL2IGMPSnoopingMulticastVlanState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the global state of the igmp_snoop multicast_vlan."
::={swL2DevCtrl 25}
swL2DevCtrlVLANTrunkState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the global state of the VLAN trunking feature of the device."
::={swL2DevCtrl 26}
swL2DevCtrlWeb OBJECT IDENTIFIER ::= { swL2DevCtrl 27 }
swL2DevCtrlWebState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls Web status."
::= { swL2DevCtrlWeb 1 }
swL2DevCtrlTelnet OBJECT IDENTIFIER ::= { swL2DevCtrl 28 }
swL2DevCtrlTelnetState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the Telnet status."
::= { swL2DevCtrlTelnet 1 }
-- -----------------------------------------------------------------------------
swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 }
swL2DevAlarmNewRoot OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the device has become the new root of the Spanning Tree,
this object decides whether to send a new root trap."
::= { swL2DevAlarm 1 }
swL2DevAlarmTopologyChange OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether or not to send a trap message when
the switch topology changes. If the object is enabled (3), the Topology Change
trap is sent by the device when any of its configured ports transition from
the Learning state to the Forwarding state, or from the Forwarding state to
the Blocking state. For the same port transition, the device does not send the
trap if this object value is disabled or in another state."
::= { swL2DevAlarm 2 }
swL2DevAlarmLinkChange OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether or not to send a trap message when the link
changes. If the object is enabled (3), the Link Change trap is sent by
the device when any of its port links change. The device does not send the
trap if this object value is disabled or in another state."
::= { swL2DevAlarm 3 }
-- ********************************************************************
-- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
-- ********************************************************************
swL2PortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every port."
::= { swL2PortMgmt 1 }
swL2PortInfoEntry OBJECT-TYPE
SYNTAX SwL2PortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each port of the device."
INDEX { swL2PortInfoPortIndex,swL2PortInfoMediumType }
::= { swL2PortInfoTable 1 }
SwL2PortInfoEntry ::=
SEQUENCE {
swL2PortInfoPortIndex
INTEGER,
swL2PortInfoMediumType
INTEGER,
--swL2PortInfoType
-- INTEGER,
-- swL2PortInfoDescr
-- DisplayString,
swL2PortInfoLinkStatus
INTEGER,
swL2PortInfoNwayStatus
INTEGER
}
swL2PortInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2PortInfoEntry 1 }
swL2PortInfoMediumType OBJECT-TYPE
SYNTAX INTEGER{
copper(100),
fiber(101)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port type: fiber or copper."
::= { swL2PortInfoEntry 2 }
--swL2PortInfoType OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- portType-UTP(2),
-- portType-AUI(3),
-- portType-Fiber-MTRJ(4),
-- portType-Fiber-SC(5),
-- portType-Fiber-GBIC(6),
-- portType-BNC(7)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the connector type of this port."
-- ::= { swL2PortInfoEntry 2 }
--swL2PortInfoDescr OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..64))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Provides port type information in displayed string format"
-- ::= { swL2PortInfoEntry 3 }
swL2PortInfoLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
link-pass(2),
link-fail(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port link status."
::= { swL2PortInfoEntry 4 }
swL2PortInfoNwayStatus OBJECT-TYPE
SYNTAX INTEGER {
--other(1),
--half-10Mbps(2),
--full-10Mbps(3),
--half-100Mbps(4),
--full-100Mbps(5),
--half-1Gigabps(6),
--full-1Gigabps(7)
auto(1),
half-10Mbps(2),
full-10Mbps(3),
half-100Mbps(4),
full-100Mbps(5),
half-1Gigabps(6),
full-1Gigabps(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port speed and duplex mode."
::= { swL2PortInfoEntry 5 }
-- *******************************************************
swL2PortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains control information about every port."
::= { swL2PortMgmt 2 }
swL2PortCtrlEntry OBJECT-TYPE
SYNTAX SwL2PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of control information for each port of the device."
INDEX { swL2PortCtrlPortIndex,swL2PortCtrlPortMediumType }
::= { swL2PortCtrlTable 1 }
SwL2PortCtrlEntry ::=
SEQUENCE {
swL2PortCtrlPortIndex
INTEGER,
swL2PortCtrlPortMediumType
INTEGER,
swL2PortCtrlAdminState
INTEGER,
swL2PortCtrlNwayState
INTEGER,
swL2PortCtrlFlowCtrlState
INTEGER,
swL2PortCtrlDescription
DisplayString,
swL2PortCtrlAddressLearning
INTEGER,
swL2PortCtrlMACNotifyState
INTEGER,
swL2PortCtrlMulticastfilter
INTEGER,
swL2PortCtrlMDIXState
INTEGER
--swL2PortCtrlCleanStatCounter
-- INTEGER
}
swL2PortCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2PortCtrlEntry 1 }
swL2PortCtrlPortMediumType OBJECT-TYPE
SYNTAX INTEGER {
copper(100),
fiber(101)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port type: fiber or copper."
::= { swL2PortCtrlEntry 2 }
swL2PortCtrlAdminState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides whether the port is enabled or disabled."
::= { swL2PortCtrlEntry 3 }
swL2PortCtrlNwayState OBJECT-TYPE
SYNTAX INTEGER {
-- other(1),
-- nway-enabled(2),
-- nway-disabled-10Mbps-Half(3),
-- nway-disabled-10Mbps-Full(4),
-- nway-disabled-100Mbps-Half(5),
-- nway-disabled-100Mbps-Full(6),
-- nway-disabled-1Gigabps-Half(7),
-- nway-disabled-1Gigabps-Full(8)
nway-auto(1),
nway-disabled-10Mbps-Half(2),
nway-disabled-10Mbps-Full(3),
nway-disabled-100Mbps-Half(4),
nway-disabled-100Mbps-Full(5),
-- nway-disabled-1Gigabps-Half(6),
nway-disabled-1Gigabps-Full(7),
nway-disabled-1Gigabps-Full-Master(8),
nway-disabled-1Gigabps-Full-Slave(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port speed, duplex mode, and N-Way function mode."
::= { swL2PortCtrlEntry 4 }
swL2PortCtrlFlowCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the flow control function as enabled or disabled."
::= { swL2PortCtrlEntry 5 }
swL2PortCtrlDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object describes the ports in text."
::= { swL2PortCtrlEntry 6 }
swL2PortCtrlAddressLearning OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides whether the address learning is enabled or disabled."
::= { swL2PortCtrlEntry 7 }
swL2PortCtrlMACNotifyState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets each port's MAC notification state."
::= { swL2PortCtrlEntry 8 }
swL2PortCtrlMulticastfilter OBJECT-TYPE
SYNTAX INTEGER {
-- other(0),
-- forward-all-groups(1),
forward-unregistered-groups(2),
filter-unregistered-groups(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides the multicast packet filtering mode on this port. "
::= { swL2PortCtrlEntry 9 }
swL2PortCtrlMDIXState OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
normal(2),
cross(3),
other(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the MDIX setting of the port.
The value 'other' is for those entries in which MDIX is not applicable."
::= { swL2PortCtrlEntry 10 }
-- swL2PortCtrlCleanStatCounter OBJECT-TYPE
-- SYNTAX INTEGER {
-- normal(1),
-- active(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "As the object is set to active, the statistic counters of this port will be
-- cleared. If set to normal, do nothing."
-- ::= { swL2PortCtrlEntry 5 }
swL2PortErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about the Err port."
::= { swL2PortMgmt 3 }
swL2PortErrEntry OBJECT-TYPE
SYNTAX SwL2PortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for the err port of the device."
INDEX { swL2PortErrPortIndex }
::= { swL2PortErrTable 1 }
SwL2PortErrEntry ::=
SEQUENCE {
swL2PortErrPortIndex
INTEGER,
swL2PortErrPortState
INTEGER,
swL2PortErrPortStatus
INTEGER,
swL2PortErrPortReason
INTEGER,
swL2PortErrDescription
DisplayString
}
swL2PortErrPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2PortErrEntry 1 }
swL2PortErrPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the port state is enabled or disabled."
::= { swL2PortErrEntry 2 }
swL2PortErrPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
err-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the PortStatus is err-disabled."
::= { swL2PortErrEntry 3 }
swL2PortErrPortReason OBJECT-TYPE
SYNTAX INTEGER {
stp-lbd(1),
storm-control(2),
ddm(3),
duld(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module which disabled the port."
::= { swL2PortErrEntry 4 }
swL2PortErrDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object describes the ports in text."
::= { swL2PortErrEntry 5 }
-- ********************************************************************
-- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
-- ********************************************************************
swL2QOSBandwidthControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 1 }
swL2QOSBandwidthControlEntry OBJECT-TYPE
SYNTAX SwL2QOSBandwidthControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2QOSBandwidthControlTable."
INDEX { swL2QOSBandwidthPortIndex }
::= { swL2QOSBandwidthControlTable 1 }
SwL2QOSBandwidthControlEntry ::=
SEQUENCE {
swL2QOSBandwidthPortIndex
INTEGER,
swL2QOSBandwidthRxRate
INTEGER,
swL2QOSBandwidthTxRate
INTEGER,
swL2QOSBandwidthRadiusRxRate
INTEGER,
swL2QOSBandwidthRadiusTxRate
INTEGER
}
swL2QOSBandwidthPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..650)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port."
::= { swL2QOSBandwidthControlEntry 1 }
swL2QOSBandwidthRxRate OBJECT-TYPE
SYNTAX INTEGER (64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the RX Rate(Mbit/sec) of the specifed port. A value of 1024000 means no limit."
::= { swL2QOSBandwidthControlEntry 2 }
swL2QOSBandwidthTxRate OBJECT-TYPE
SYNTAX INTEGER (64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the TX Rate(Mbit/sec) of the specifed port. A value of 1024000 means no limit. "
::= { swL2QOSBandwidthControlEntry 3 }
swL2QOSBandwidthRadiusRxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Rx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Rx Rate. "
::= { swL2QOSBandwidthControlEntry 4 }
swL2QOSBandwidthRadiusTxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Tx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Tx Rate. "
::= { swL2QOSBandwidthControlEntry 5 }
-- *******************************************************
swL2QOSSchedulingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 2 }
swL2QOSSchedulingEntry OBJECT-TYPE
SYNTAX SwL2QOSSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOSSchedulingTable."
INDEX { swL2QOSSchedulingClassIndex }
::= { swL2QOSSchedulingTable 1 }
SwL2QOSSchedulingEntry ::=
SEQUENCE {
swL2QOSSchedulingClassIndex
INTEGER,
-- swL2QOSSchedulingMaxPkts
-- INTEGER,
-- swL2QOSSchedulingMaxLatency
-- INTEGER,
swL2QOSSchedulingMaxWeight
INTEGER,
swL2QOSSchedulingMechanism
INTEGER
}
swL2QOSSchedulingClassIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hardware queue number."
::= { swL2QOSSchedulingEntry 1 }
-- swL2QOSSchedulingMaxPkts OBJECT-TYPE
-- SYNTAX INTEGER (0..255)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicates the maximum number of packets the hardware priority queue will be allowed
-- to transmit before allowing the next lowest priority queue to transmit its packets.
-- a value between 0 and 255 can be specified."
-- ::= { swL2QOSSchedulingEntry 2 }
--
-- swL2QOSSchedulingMaxLatency OBJECT-TYPE
-- SYNTAX INTEGER (0..255)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicates the maximum amount of time the hardware priority queue will be allowed
-- to transmit packets before allowing the next lowest priority queue to begin transmit
-- its packets. A value between 0 and 255 can be specified- with this value multiplied
-- by 16 ms to arrive at the total allowed time for queue to transmit packets.
-- For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting
-- the last packet until it is finished when the max_latency timer expires. "
-- ::= { swL2QOSSchedulingEntry 3 }
swL2QOSSchedulingMaxWeight OBJECT-TYPE
SYNTAX INTEGER (1..55)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { swL2QOSSchedulingEntry 4 }
swL2QOSSchedulingMechanism OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
roundrobin(2),
weightfair(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the mechanism of QOS scheduling."
::= { swL2QOSSchedulingEntry 5 }
swL2QOSSchedulingMechanismCtrl OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
-- roundrobin(2),
weightfair(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can control QOS scheduling Mechanism."
::= { swL2QOSMgmt 5 }
-- *******************************************************
swL2QOS8021pUserPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 3 }
swL2QOS8021pUserPriorityEntry OBJECT-TYPE
SYNTAX SwL2QOS8021pUserPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOS8021pUserPriorityTable."
INDEX { swL2QOS8021pUserPriorityIndex }
::= { swL2QOS8021pUserPriorityTable 1 }
SwL2QOS8021pUserPriorityEntry ::=
SEQUENCE {
swL2QOS8021pUserPriorityIndex
INTEGER,
swL2QOS8021pUserPriorityClass
INTEGER
}
swL2QOS8021pUserPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p user priority."
::= { swL2QOS8021pUserPriorityEntry 1 }
swL2QOS8021pUserPriorityClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has four hardware
priority queues available. They are numbered between 0 (the lowest priority)
and 3 (the highest priority)."
::= { swL2QOS8021pUserPriorityEntry 2 }
-- ******************************************************
swL2QOS8021pDefaultPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 4 }
swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE
SYNTAX SwL2QOS8021pDefaultPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2QOS8021pDefaultPriorityTable."
INDEX { swL2QOS8021pDefaultPriorityIndex }
::= { swL2QOS8021pDefaultPriorityTable 1 }
SwL2QOS8021pDefaultPriorityEntry ::=
SEQUENCE {
swL2QOS8021pDefaultPriorityIndex
INTEGER,
swL2QOS8021pDefaultPriority
INTEGER,
swL2QOS8021pRadiusPriority
INTEGER
}
swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (1..650)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port number."
::= { swL2QOS8021pDefaultPriorityEntry 1 }
swL2QOS8021pDefaultPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value to assign to untagged packets received by the
switch ports on the switch."
::= { swL2QOS8021pDefaultPriorityEntry 2 }
swL2QOS8021pRadiusPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of 802.1p comes from RADIUS server.
If an 802.1X port is authenticated,
this value will overwrite the local configured value."
::= { swL2QOS8021pDefaultPriorityEntry 3 }
-- swL2QOSDscpMappingTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2QOSDscpMappingEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSMgmt 6 }
--
-- swL2QOSDscpMappingEntry OBJECT-TYPE
-- SYNTAX SwL2QOSDscpMappingEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- INDEX { swL2QOSDscpIndex }
-- ::= { swL2QOSDscpMappingTable 1 }
--
-- SwL2QOSDscpMappingEntry ::=
-- SEQUENCE {
-- swL2QOSDscpIndex
-- INTEGER,
-- swL2QOSDscpClass
-- INTEGER
-- }
--
-- swL2QOSDscpIndex OBJECT-TYPE
-- SYNTAX INTEGER (0..63)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSDscpMappingEntry 1 }
--
--swL2QOSDscpClass OBJECT-TYPE
-- SYNTAX INTEGER (0..3)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSDscpMappingEntry 2 }
--
--swL2QOSPortDscpTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2QOSPortDscpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSMgmt 7 }
--
--swL2QOSPortDscpEntry OBJECT-TYPE
-- SYNTAX SwL2QOSPortDscpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- INDEX { swL2QOSPortDscpIndex }
-- ::= { swL2QOSPortDscpTable 1 }
--
--SwL2QOSPortDscpEntry ::=
-- SEQUENCE {
-- swL2QOSPortDscpIndex
-- INTEGER,
-- swL2QOSPortDscpStatus
-- INTEGER
-- }
--
--swL2QOSPortDscpIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..10)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSPortDscpEntry 1 }
--
--swL2QOSPortDscpStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disable(2),
-- enable(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSPortDscpEntry 2 }
--
--
-- ************************************************************************
-- swPortTrunkTable
-- ************************************************************************
swPortTrunkMaxEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max entries of the swPortTrunkTable"
::= { swL2TrunkMgmt 1}
swPortTrunkMaxPortMembers OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max number of ports allowed in a trunk."
::= { swL2TrunkMgmt 2}
swPortTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwPortTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the port membership for each logical link."
::= { swL2TrunkMgmt 3 }
swPortTrunkEntry OBJECT-TYPE
SYNTAX SwPortTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information that specifies which port group forms
a single logical link."
INDEX { swPortTrunkIndex }
::= { swPortTrunkTable 1 }
SwPortTrunkEntry ::=
SEQUENCE {
swPortTrunkIndex
Integer32,
swPortTrunkMasterPort
Integer32,
swPortTrunkPortList
PortList,
swPortTrunkType
INTEGER,
swPortTrunkActivePort
PortList,
swPortTrunkState
RowStatus,
swPortTrunkFloodingPort
Integer32
}
swPortTrunkIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of logical port trunk."
::= { swPortTrunkEntry 1 }
swPortTrunkMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the master port number of the port trunk entry. The
first port of the trunk is implicitly configured to be the master logical
port. When using a Port Trunk, you can not configure the other ports of
the group except the master port. Their configuration must be the same as the
master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)."
::= { swPortTrunkEntry 2 }
swPortTrunkPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate member ports of a logical trunk."
::= { swPortTrunkEntry 3 }
--add
swPortTrunkType OBJECT-TYPE
SYNTAX INTEGER{
static(1),
lacp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of this entry."
::= { swPortTrunkEntry 4 }
swPortTrunkActivePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the active ports of this entry."
::= { swPortTrunkEntry 5 }
swPortTrunkState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
when the state is CreatAndGo (4),the type of trunk is static (1);
when the state is CreatAndWait (5), the type of trunk is lacp(2).
"
::= { swPortTrunkEntry 6 }
swPortTrunkFloodingPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flooding port of every trunk."
::= { swPortTrunkEntry 7 }
swL2TrunkAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
other(1),
mac-source(2),
mac-destination(3),
mac-source-dest(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures part of the packet to be examined by the
switch when selecting the egress port for transmitting
load-sharing data."
::= { swL2TrunkMgmt 4 }
swL2TrunkLACPPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies which port group a set of ports (up to 8)
is formed into a single logical link."
::= { swL2TrunkMgmt 5 }
swL2TrunkLACPPortEntry OBJECT-TYPE
SYNTAX SwL2TrunkLACPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specifies which port group a set of
ports (up to 8) is formed into a single logical link."
INDEX { swL2TrunkLACPPortIndex }
::= { swL2TrunkLACPPortTable 1 }
SwL2TrunkLACPPortEntry ::=
SEQUENCE {
swL2TrunkLACPPortIndex
INTEGER,
swL2TrunkLACPPortState
INTEGER
}
swL2TrunkLACPPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the logical port LACP. "
::= { swL2TrunkLACPPortEntry 1 }
swL2TrunkLACPPortState OBJECT-TYPE
SYNTAX INTEGER{
active(1),
passive(2)
-- stacking-port(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the logical port LACP."
::= { swL2TrunkLACPPortEntry 2 }
swL2TrunkVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the VLAN trunking feature of the device."
::= { swL2TrunkMgmt 6 }
swL2TrunkVLANEntry OBJECT-TYPE
SYNTAX SwL2TrunkVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to configure the VLAN trunking settings for each port."
INDEX { swL2TrunkVLANPort }
::= { swL2TrunkVLANTable 1 }
SwL2TrunkVLANEntry ::=
SEQUENCE {
swL2TrunkVLANPort
INTEGER,
swL2TrunkVLANState
INTEGER
}
swL2TrunkVLANPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port being configured."
::= { swL2TrunkVLANEntry 1 }
swL2TrunkVLANState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the logical port LACP."
::= { swL2TrunkVLANEntry 2 }
-- **************************************************************************
-- swPortMirrorPackage
-- **************************************************************************
-- swPortMirrorMaxEntries OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The max entries of this swPortMirrorCtrlTable."
-- ::= { swPortMirrorPackage 1}
-- swPortMirrorCtrlTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortMirrorCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of port snooping entries. Port mirroring function provides an easy
-- way to monitor traffic on any port. In this way any good packet appears
-- on the source mirror port also shows up on the target mirror port and
-- doesn't reconstruct the LAN."
-- ::= { swPortMirrorPackage 2 }
-- swPortMirrorCtrlEntry OBJECT-TYPE
-- SYNTAX SwPortMirrorCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information to provide an easy way to monitor traffic on any port.
-- It can be used to attach a fancy network monitor to any target mirror
-- port and set the port to be monitored as source mirror port. "
-- INDEX { swPortMirrorIndex }
-- ::= { swPortMirrorCtrlTable 1 }
-- SwPortMirrorCtrlEntry ::=
-- SEQUENCE {
-- swPortMirrorIndex
-- Integer32,
-- swPortMirrorSourcePort
-- Integer32,
-- swPortMirrorRxPortList
-- PortList,
-- swPortMirrorTxPortList
-- PortList,
-- swPortMirrorTargetPort
-- Integer32,
-- swPortMirrorDirection
-- INTEGER,
-- swPortMirrorState
-- RowStatus
-- }
-- swPortMirrorIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the port snooping entry number. There is just only
-- one now."
-- ::= { swPortMirrorCtrlEntry 1 }
swPortMirrorRxPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Rx port list of ports to be sniffed."
::= { swPortMirrorPackage 2 }
swPortMirrorTxPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Tx port list of ports to be sniffed."
::= { swPortMirrorPackage 3 }
swPortMirrorTargetPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the switch whose port will sniff another port.
A trunk port member cannot be configured as a target Snooping port.
The port number is the sequential (logical) number which is also
applied to the bridge MIB, etc. "
::= { swPortMirrorPackage 4 }
-- swPortMirrorDirection OBJECT-TYPE
-- SYNTAX INTEGER {
--gavin for eds2626 2003 28th May
-- other(1),
-- ingress(2),
-- egress(3),
-- both(4)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "This object is used to set up the packets that will be mirrored."
-- ::= { swPortMirrorCtrlEntry 4}
swPortMirrorState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swPortMirrorPackage 5 }
-- ********************************************************************
-- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
-- ********************************************************************
swL2IGMPMaxSupportedVlans OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VLANs in the layer 2 IGMP control table
(swL2IGMPCtrlTable)."
::= { swIGMPPackage 1 }
swL2IGMPMaxIpGroupNumPerVlan OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of multicast IP groups per VLAN in the layer 2
IGMP information table (swL2IGMPQueryInfoTable)."
::= { swIGMPPackage 2 }
-- swL2IGMPLastQueryIPAddr OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IP address of the last sent IGMP query
-- packet."
-- ::= { swL2IGMPMgmt 3 }
--------------------------------------------------
-- IGMP Ctrl Table
--------------------------------------------------
swL2IGMPCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN mode is disabled, there is only one entry in the table, with index 1. If
VLAN is in Port-Based or 802.1q mode, the number of entries can
be up to 12, with an index range from 1 to 12."
::= { swIGMPPackage 3 }
swL2IGMPCtrlEntry OBJECT-TYPE
SYNTAX SwL2IGMPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP captures the switch
(swL2DevCtrlIGMPSnooping) is enabled."
INDEX { swL2IGMPCtrlVid }
::= { swL2IGMPCtrlTable 1 }
SwL2IGMPCtrlEntry ::=
SEQUENCE {
-- swL2IGMPCtrlIndex
-- INTEGER,
swL2IGMPCtrlVid
INTEGER,
swL2IGMPQueryInterval
INTEGER,
swL2IGMPMaxResponseTime
INTEGER,
swL2IGMPRobustness
INTEGER,
swL2IGMPLastMemberQueryInterval
INTEGER,
swL2IGMPHostTimeout
INTEGER,
swL2IGMPRouteTimeout
INTEGER,
swL2IGMPLeaveTimer
INTEGER,
swL2IGMPQueryState
INTEGER,
swL2IGMPCurrentState
INTEGER,
swL2IGMPCtrlState
INTEGER,
swL2IGMPFastLeave
INTEGER,
swL2IGMPDynIPMultVlanState
INTEGER,
swL2IGMPDynIPMultVlanAge
INTEGER
}
-- swL2IGMPCtrlIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IGMP control entry number. Its scale
-- depends on the current VLAN state (swL2VlanInfoStatus). If VLAN is
-- disabled, there is only one entry in the table, with index 1.
-- If VLAN is in Port-Based or 802.1q mode, the number of entries
-- is 12, with an index range from 1 to 12."
-- ::= { swL2IGMPCtrlEntry 1 }
swL2IGMPCtrlVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IGMP control entry's VLAN ID. If VLAN
is disabled, the VID is always 0 and cannot be changed by
management users. If VLAN is in Port-Based mode, the VID is
arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode,
the VID setting can vary from 1 to 4094 by management user, and
the VID in each entry must be unique in the IGMP Control Table."
::= { swL2IGMPCtrlEntry 1 }
swL2IGMPQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which IGMP Host-Query packets are
transmitted on this switch."
DEFVAL { 125 }
::= { swL2IGMPCtrlEntry 2 }
swL2IGMPMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time on this switch."
DEFVAL { 10 }
::= { swL2IGMPCtrlEntry 3 }
swL2IGMPRobustness OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses."
DEFVAL { 2 }
::= { swL2IGMPCtrlEntry 4 }
swL2IGMPLastMemberQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages."
DEFVAL { 1 }
::= { swL2IGMPCtrlEntry 5 }
swL2IGMPHostTimeout OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timer value for sending IGMP query packets when none was
sent by the host in the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send the query message if the
timer expires. Please reference RFC2236-1997."
DEFVAL { 260 }
::= { swL2IGMPCtrlEntry 6 }
swL2IGMPRouteTimeout OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages."
DEFVAL { 260 }
::= { swL2IGMPCtrlEntry 7 }
swL2IGMPLeaveTimer OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left."
DEFVAL { 1 }
::= { swL2IGMPCtrlEntry 8 }
swL2IGMPQueryState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decides if the IGMP query is enabled or disabled."
::= { swL2IGMPCtrlEntry 9 }
swL2IGMPCurrentState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
querier(2),
non-querier(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current IGMP query state."
::= { swL2IGMPCtrlEntry 10 }
swL2IGMPCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other (1) - This entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable (2) - IGMP function is disabled for this entry.
enable (3) - IGMP function is enabled for this entry."
::= { swL2IGMPCtrlEntry 11 }
swL2IGMPFastLeave OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { swL2IGMPCtrlEntry 12 }
swL2IGMPDynIPMultVlanState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to disable or enable the dynamic IP multicast feature in this VLAN."
::= { swL2IGMPCtrlEntry 13 }
swL2IGMPDynIPMultVlanAge OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN."
::= { swL2IGMPCtrlEntry 14 }
--------------------------------------------------
-- IGMP Query Info Table
--------------------------------------------------
swL2IGMPQueryInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPQueryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the number of current IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device."
::= { swIGMPPackage 4 }
swL2IGMPQueryInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPQueryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled."
INDEX { swL2IGMPInfoVid }
::= { swL2IGMPQueryInfoTable 1 }
SwL2IGMPQueryInfoEntry ::=
SEQUENCE {
-- swL2IGMPInfoIndex
-- INTEGER,
swL2IGMPInfoVid
INTEGER,
swL2IGMPInfoQueryCount
INTEGER,
swL2IGMPInfoTxQueryCount
INTEGER
}
-- swL2IGMPInfoIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IGMP query information entry
-- number. It could be up to 12 entries, depending on the current
-- number of VLAN entries."
-- ::= { swL2IGMPQueryInfoEntry 1 }
swL2IGMPInfoVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of
IGMP control table (swL2IGMPCtrlTable)."
::= { swL2IGMPQueryInfoEntry 1 }
swL2IGMPInfoQueryCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function enabled, on a per-VLAN basis."
::= { swL2IGMPQueryInfoEntry 2 }
swL2IGMPInfoTxQueryCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, on
a per-VLAN basis. In case of the IGMP timer expiring, the switch
sends IGMP query packets to related VLAN member ports and
increment this object by 1."
::= { swL2IGMPQueryInfoEntry 3 }
--------------------------------------------------
-- IGMP Info Table
--------------------------------------------------
swL2IGMPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing current IGMP information which was captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled. Note
that the priority of IGMP table entries is lower than Filtering
Table, i.e. if there is a table hash collision between the
entries of IGMP Table and Filtering Table inside the switch H/W
address table, then Filtering Table entry overwrite the
colliding entry of IGMP Table. Also see swL2FilterMgmt description."
::= { swIGMPPackage 5 }
swL2IGMPInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP information which was captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled."
INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr }
::= { swL2IGMPInfoTable 1 }
SwL2IGMPInfoEntry ::=
SEQUENCE {
swL2IGMPVid
INTEGER,
swL2IGMPGroupIpAddr
IpAddress,
swL2IGMPMacAddr
MacAddress,
swL2IGMPPortMap
PortList,
swL2IGMPIpGroupReportCount
INTEGER
}
swL2IGMPVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of an individual IGMP table entry.
It shows the VID of IGMP report information captured on the
network."
::= { swL2IGMPInfoEntry 1 }
swL2IGMPGroupIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the identify group IP address which is captured from
IGMP packet, on a per-VLAN basis."
::= { swL2IGMPInfoEntry 2 }
swL2IGMPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the MAC address which is corresponding
to swL2IGMPGroupIpAddr, on a per-VLAN basis."
::= { swL2IGMPInfoEntry 3 }
swL2IGMPPortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates which ports belong to the same
multicast group, on a per-VLAN basis. Each multicast group has an
octet string to indicate the port map. The most significant
bit represents the lowest numbered port, and the least
significant bit represents the highest numbered port. Thus, each
port of the switch is represented by a single bit within the
value of this object. If that bit has a value of '1' then that
port is included in the set of ports; the port is not included
if its bit has a value of '0' (Note that the setting of the bit
corresponding to the port from which a frame is received is
irrelevant). The 4 octets represent one unit port according
to its logic port. If the unit is less than 32 ports, the other port will just fill this value with zeros."
::= { swL2IGMPInfoEntry 4 }
swL2IGMPIpGroupReportCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how many report packets were received by our
device corresponding with this entry that has the IGMP function enabled,
on a per-VLAN basis."
::= { swL2IGMPInfoEntry 5 }
--------------------------------------------------
-- IGMP Router Port Table
--------------------------------------------------
swL2IGMPRouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information of the router port table."
::= { swIGMPPackage 6 }
swL2IGMPRouterPortEntry OBJECT-TYPE
SYNTAX SwL2IGMPRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the swL2IGMPRouterPortTable."
INDEX { swL2IGMPRouterPortVlanid }
::= { swL2IGMPRouterPortTable 1 }
SwL2IGMPRouterPortEntry ::=
SEQUENCE {
swL2IGMPRouterPortVlanid
INTEGER,
swL2IGMPRouterPortVlanName
SnmpAdminString,
swL2IGMPRouterPortStaticPortList
PortList,
swL2IGMPRouterPortDynamicPortList
PortList,
swL2IGMPRouterPortForbiddenPortList
PortList
}
swL2IGMPRouterPortVlanid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the router port entry."
::= { swL2IGMPRouterPortEntry 1 }
swL2IGMPRouterPortVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the router port entry."
::= { swL2IGMPRouterPortEntry 2 }
swL2IGMPRouterPortStaticPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the static portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 3 }
swL2IGMPRouterPortDynamicPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the dynamic portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 4 }
swL2IGMPRouterPortForbiddenPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the forbidden portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 5 }
--------------------------------------------------
-- IGMP Access Authentication Table
--------------------------------------------------
swL2IGMPAccessAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the IGMP Access Authentication
configurations of the device."
::= { swIGMPPackage 7 }
swL2IGMPAccessAuthEntry OBJECT-TYPE
SYNTAX SwL2IGMPAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of manageable entities for IGMP Access Authentication.
The configuration is done per port."
INDEX { swL2IGMPAccessAuthPort }
::= { swL2IGMPAccessAuthTable 1 }
SwL2IGMPAccessAuthEntry ::=
SEQUENCE {
swL2IGMPAccessAuthPort
INTEGER,
swL2IGMPAccessAuthState
INTEGER
}
swL2IGMPAccessAuthPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured."
::= { swL2IGMPAccessAuthEntry 1 }
swL2IGMPAccessAuthState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the status of IGMP Access Authentication of the port."
::= { swL2IGMPAccessAuthEntry 2 }
-- -----------------------------------------------------------------------------
-- swL2IGMPMulticastVlanTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 8 }
-- -----------------------------------------------------------------------------
swL2IGMPMulticastVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the IGMP snooping multicast VLAN table."
::= { swIGMPPackage 8 }
swL2IGMPMulticastVlanEntry OBJECT-TYPE
SYNTAX SwL2IGMPMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of swL2IGMPMulticastVlanTable."
INDEX { swL2IGMPMulticastVlanid}
::= { swL2IGMPMulticastVlanTable 1 }
SwL2IGMPMulticastVlanEntry ::=
SEQUENCE {
swL2IGMPMulticastVlanid
INTEGER,
swL2IGMPMulticastVlanName
DisplayString,
swL2IGMPMulticastVlanSourcePort
PortList,
swL2IGMPMulticastVlanMemberPort
PortList,
swL2IGMPMulticastVlanTagMemberPort
PortList,
swL2IGMPMulticastVlanState
INTEGER,
swL2IGMPMulticastVlanReplaceSourceIp
IpAddress,
swL2IGMPMulticastVlanRowStatus
RowStatus,
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction
INTEGER,
swL2IGMPMulticastVlanUntagSourcePort
PortList,
swL2IGMPMulticastVlanRemapPriority
INTEGER,
swL2IGMPMulticastVlanReplacePriority
INTEGER
}
swL2IGMPMulticastVlanid OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry."
::= { swL2IGMPMulticastVlanEntry 1 }
swL2IGMPMulticastVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry."
::= { swL2IGMPMulticastVlanEntry 2 }
swL2IGMPMulticastVlanSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the source ports of the IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports."
::= { swL2IGMPMulticastVlanEntry 3 }
swL2IGMPMulticastVlanMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports."
::= { swL2IGMPMulticastVlanEntry 4 }
swL2IGMPMulticastVlanTagMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the tag member ports of the IGMP
snooping multicast VLAN."
::= { swL2IGMPMulticastVlanEntry 5 }
swL2IGMPMulticastVlanState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to enable or disable the IGMP snooping multicast VLAN."
::= { swL2IGMPMulticastVlanEntry 6 }
swL2IGMPMulticastVlanReplaceSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replacement source IP of this multicast VLAN."
::= { swL2IGMPMulticastVlanEntry 7 }
swL2IGMPMulticastVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2IGMPMulticastVlanEntry 8 }
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether to remove all the multicast address
lists from the IGMP multicast VLAN or not."
::= { swL2IGMPMulticastVlanEntry 9 }
swL2IGMPMulticastVlanUntagSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the untagged member ports to add to the multicast VLAN."
::={ swL2IGMPMulticastVlanEntry 10}
swL2IGMPMulticastVlanRemapPriority OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value (0 to 7) to be associated with the data traffic
to be forwarded on the multicast VLAN.
When set to 8, the packet's original priority will be used."
DEFVAL {8}
::={ swL2IGMPMulticastVlanEntry 11}
swL2IGMPMulticastVlanReplacePriority OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that a packet's priority will be changed by the switch
based on the remap priority. This flag will only take effect
when remap priority is set."
::={ swL2IGMPMulticastVlanEntry 12}
-- -----------------------------------------------------------------------------
-- swL2IGMPMulticastVlanGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 9 }
-- -----------------------------------------------------------------------------
swL2IGMPMulticastVlanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing the IGMP snooping multicast VLAN group information"
::= { swIGMPPackage 9 }
swL2IGMPMulticastVlanGroupEntry OBJECT-TYPE
SYNTAX SwL2IGMPMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the current IGMP snooping multicast VLAN group."
INDEX { swL2IGMPMulticastVlanGroupVid,swL2IGMPMulticastVlanGroupFromIp,swL2IGMPMulticastVlanGroupToIp }
::= { swL2IGMPMulticastVlanGroupTable 1 }
SwL2IGMPMulticastVlanGroupEntry ::=
SEQUENCE {
swL2IGMPMulticastVlanGroupVid
INTEGER,
swL2IGMPMulticastVlanGroupFromIp
IpAddress,
swL2IGMPMulticastVlanGroupToIp
IpAddress,
swL2IGMPMulticastVlanGroupStatus
RowStatus
}
swL2IGMPMulticastVlanGroupVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the IGMP snooping multicast VLAN group."
::= { swL2IGMPMulticastVlanGroupEntry 1 }
swL2IGMPMulticastVlanGroupFromIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { swL2IGMPMulticastVlanGroupEntry 2 }
swL2IGMPMulticastVlanGroupToIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { swL2IGMPMulticastVlanGroupEntry 3 }
swL2IGMPMulticastVlanGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2IGMPMulticastVlanGroupEntry 4 }
-- -----------------------------------------------------------------------------
-- swL2IGMPv3Table OBJECT IDENTIFIER ::= { swL2IGMPMgmt 10 }
-- -----------------------------------------------------------------------------
swL2IGMPv3Table OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IGMP snooping V3 information."
::= { swIGMPPackage 10 }
swL2IGMPv3Entry OBJECT-TYPE
SYNTAX SwL2IGMPv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the current IGMP snooping V3."
INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr , swL2IGMPv3SourceIPAddr }
::= { swL2IGMPv3Table 1 }
SwL2IGMPv3Entry ::=
SEQUENCE {
swL2IGMPv3SourceIPAddr
IpAddress,
swL2IGMPv3Forwarding
INTEGER,
swL2IGMPv3ExpireTimer
INTEGER
}
swL2IGMPv3SourceIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the source IP addresses from the group where they were captured from.
IGMP packets, on a per-VLAN basis."
::= { swL2IGMPv3Entry 1 }
swL2IGMPv3Forwarding OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies if the packets from the source IP addresses are forwarding or not."
::= { swL2IGMPv3Entry 2 }
swL2IGMPv3ExpireTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the leaving times of the source time."
::= { swL2IGMPv3Entry 3 }
-- -----------------------------------------------------------------------------
-- swIGMPSnoopingGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 11 }
-- -----------------------------------------------------------------------------
swIGMPSnoopingGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwIGMPSnoopingGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the current IGMP snooping group information captured by
the device."
::= { swIGMPPackage 11 }
swIGMPSnoopingGroupEntry OBJECT-TYPE
SYNTAX SwIGMPSnoopingGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the current IGMP snooping group information which has been captured by
the device."
INDEX { swIGMPSnoopingGroupVid , swIGMPSnoopingGroupGroupAddr , swIGMPSnoopingGroupSourceAddr}
::= { swIGMPSnoopingGroupTable 1 }
SwIGMPSnoopingGroupEntry ::=
SEQUENCE {
swIGMPSnoopingGroupVid
INTEGER,
swIGMPSnoopingGroupGroupAddr
IpAddress,
swIGMPSnoopingGroupSourceAddr
IpAddress,
swIGMPSnoopingGroupIncludePortMap
PortList,
swIGMPSnoopingGroupExcludePortMap
PortList,
swIGMPSnoopingGroupReportCount
INTEGER,
swIGMPSnoopingGroupUpTime
TimeTicks,
swIGMPSnoopingGroupExpiryTime
TimeTicks,
swIGMPSnoopingGroupRouterPorts
PortList
}
swIGMPSnoopingGroupVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the individual IGMP snooping group table entry."
::= { swIGMPSnoopingGroupEntry 1 }
swIGMPSnoopingGroupGroupAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the group IP address which has been captured from
the IGMP packet, on a per-VLAN basis."
::= { swIGMPSnoopingGroupEntry 2 }
swIGMPSnoopingGroupSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the source addresses."
::= { swIGMPSnoopingGroupEntry 3 }
swIGMPSnoopingGroupIncludePortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port list under INCLUDE mode."
::= { swIGMPSnoopingGroupEntry 4 }
swIGMPSnoopingGroupExcludePortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port list under EXCLUDE mode."
::= { swIGMPSnoopingGroupEntry 5 }
swIGMPSnoopingGroupReportCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how many report packets were received by our
device corresponding with this entry that has the IGMP function enabled,
on a per-group basis."
::= { swIGMPSnoopingGroupEntry 6 }
swIGMPSnoopingGroupUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how long since the group was detected."
::= { swIGMPSnoopingGroupEntry 7 }
swIGMPSnoopingGroupExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time left before this group will be aged out."
::= { swIGMPSnoopingGroupEntry 8 }
swIGMPSnoopingGroupRouterPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port number of the router ports."
::= { swIGMPSnoopingGroupEntry 9 }
-- ********************************************************************
-- swL2IGMPDynIpMultMgmt OBJECT IDENTIFIER ::= { swIGMPPackage 12 }
-- ********************************************************************
swL2IGMPDynIpMultMgmt OBJECT IDENTIFIER ::= { swIGMPPackage 12 }
swL2IGMPDynIPMultMaxEntry OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of entries which can be learned by dynamic IP multicast."
::= { swL2IGMPDynIpMultMgmt 1 }
swL2IGMPSnoopingClearDynIpMult OBJECT IDENTIFIER ::= { swL2IGMPDynIpMultMgmt 2 }
swL2IGMPSnoopingClearDynIpMultVID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the VLAN identifier where the data driven
entries will be removed from."
::= { swL2IGMPSnoopingClearDynIpMult 1 }
swL2IGMPSnoopingClearDynIpMultIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the IP address of the IGMP snooping group from which
the data driven entries will be removed."
::= { swL2IGMPSnoopingClearDynIpMult 2 }
swL2IGMPSnoopingClearDynIpMultAction OBJECT-TYPE
SYNTAX INTEGER{
all(1),
vlan(2),
group(3),
other(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object will clear the data driven entries.
all - Remove all learned data driven groups.
VLAN - Clear all data driven entries in the VLAN specified in
swIGMPSnoopingClearDynIpMultVID.
group - Clear the group with the address specified in swL2IGMPSnoopingClearDynIpMultIP
in the VLAN specified in swIGMPSnoopingClearDynIpMultVID.
"
::= { swL2IGMPSnoopingClearDynIpMult 3 }
-- ************************************************************************
-- swPortRateTable
-- ************************************************************************
-- swPortRateTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortRateEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table specifies the port membership for each logical link."
-- ::= { swPortRatePackage 1 }
--
--
-- swPortRateEntry OBJECT-TYPE
-- SYNTAX SwPortRateEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information specifies which port groups form
-- a single logical link."
-- INDEX { swPortRateIndex }
-- ::= { swPortRateTable 1 }
--
-- SwPortRateEntry ::=
-- SEQUENCE {
-- swPortRateIndex
-- Integer32,
-- swPortRateIngressRate
-- Integer32,
-- swPortRateEgressRate
-- Integer32
-- }
--
-- swPortRateIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The index of the swPortRateTable"
-- ::= { swPortRateEntry 1 }
--
-- swPortRateIngressRate OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "RX Rate"
-- ::= { swPortRateEntry 2 }
--
-- swPortRateEgressRate OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "TX Rate"
-- ::= { swPortRateEntry 3 }
-- ************************************************************************
-- swPortBindingPackage
-- ************************************************************************
-- swPortBindingStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable the Port Binding"
-- ::= { swPortBindingPackage 1 }
--
-- swPortBindingCtrlTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortBindingCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBindingPackage 2 }
--
--
-- swPortBindingCtrlEntry OBJECT-TYPE
-- SYNTAX SwPortBindingCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information."
-- INDEX { swPortBindingCtrlIndex }
-- ::= { swPortBindingCtrlTable 1 }
--
-- SwPortBindingCtrlEntry ::=
-- SEQUENCE {
-- swPortBindingCtrlIndex
-- Integer32,
-- swPortBindingCtrlStatus
-- INTEGER
-- }
--
-- swPortBindingCtrlIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBindingCtrlEntry 1 }
--
-- swPortBindingCtrlStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable the Port Binding Control"
-- ::= { swPortBindingCtrlEntry 2 }
--
-- The PortBinding Information Table
--
-- swPortBindingInfoMaxEntries OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The max entries of this swPortBindingInfoTable"
-- ::= { swPortBindingPackage 3}
--
-- swPortBindingInfoTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortBindingInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The table contains the number current PortBinding packets which
-- are captured by this device, as well as the PortBinding packets
-- sent by the device."
-- ::= { swPortBindingPackage 4 }
--
-- swPortBindingInfoEntry OBJECT-TYPE
-- SYNTAX SwPortBindingInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- INDEX {swPortBindingPortNum, swPortBindingInfoIndex }
-- ::= { swPortBindingInfoTable 1 }
--
-- SwPortBindingInfoEntry ::=
-- SEQUENCE {
-- swPortBindingPortNum
-- Integer32,
-- swPortBindingInfoIndex
-- Integer32,
-- swPortBindingInfoMacAddr
-- MacAddress,
-- swPortBindingInfoStatus
-- RowStatus
-- }
--
-- swPortBindingPortNum OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBindingInfoEntry 1 }
--
-- swPortBindingInfoIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBindingInfoEntry 2 }
--
-- swPortBindingInfoMacAddr OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "This object is to identify the MAC address."
-- ::= { swPortBindingInfoEntry 3 }
--
-- swPortBindingInfoStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Enables the Port Binding Info."
-- ::= { swPortBindingInfoEntry 4}
-- ******************************************************************************
-- swPortBaseVlanMgmt OBJECT IDENTIFIER ::= { swDlinkL2Mgmt 6 }
-- ******************************************************************************
-- swPortBaseVlanTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortBaseVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table specifies the port membership for each logical link."
-- ::= { swPortBaseVlanMgmt 1 }
--
-- swPortBaseVlanEntry OBJECT-TYPE
-- SYNTAX SwPortBaseVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information specifies which port groups form
-- a single logical link."
-- INDEX { swPortBaseVlanIndex }
-- ::= { swPortBaseVlanTable 1 }
--
-- SwPortBaseVlanEntry ::=
-- SEQUENCE {
-- swPortBaseVlanIndex
-- INTEGER,
-- swPortBaseVlanName
-- DisplayString,
-- swPortBaseVlanPortList
-- PortList,
-- swPortBaseVlanCtrlStatus
-- RowStatus
-- }
--
-- swPortBaseVlanIndex OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBaseVlanEntry 1}
--
-- swPortBaseVlanName OBJECT-TYPE
-- SYNTAX DisplayString
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBaseVlanEntry 2 }
--
-- swPortBaseVlanPortList OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Indicates the member ports of a Port Based VLAN."
-- ::= { swPortBaseVlanEntry 3 }
--
-- swPortBaseVlanCtrlStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Enables Port Based VLAN Info."
-- ::= { swPortBaseVlanEntry 4}
-- swVlanModeSwitch OBJECT-TYPE
-- SYNTAX INTEGER {
-- qvlan(1),
-- portvlan(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The network management protocol(s) supported by this agent."
-- ::= { swPortBaseVlanMgmt 2 }
-- swPriToTrafficTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPriToTrafficEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table specifies the map relationship from priority to traffic class."
-- ::= { swPriToTrafficMgmt 1 }
-- swPriToTrafficEntry OBJECT-TYPE
-- SYNTAX SwPriToTrafficEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information specifies the map relationship from priority to traffic class."
-- INDEX { swPriority }
-- ::= { swPriToTrafficTable 1 }
-- SwPriToTrafficEntry ::=
-- SEQUENCE {
-- swPriority
-- INTEGER,
-- swTrafficClassMapTo
-- INTEGER
-- }
-- swPriority OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The priority from 0 to 7."
-- ::= { swPriToTrafficEntry 1 }
-- swTrafficClassMapTo OBJECT-TYPE
-- SYNTAX INTEGER (0..1)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The traffic class each priority should map to."
-- ::= { swPriToTrafficEntry 2 }
--new
-- ********************************************************************
-- dot3adAggrPortMgmt OBJECT IDENTIFIER ::= { lagMIBObjects 1 }
-- ********************************************************************
-- dot3adAggPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF Dot3adAggPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table that contains Link Aggregation Control
-- configuration information about every
-- Aggregation Port associated with this device.
-- A row appears in this table for each physical port."
-- REFERENCE
-- "IEEE 802.3 Section 30.7.2"
-- ::= { dot3adAggrPortMgmt 1 }
--
-- dot3adAggPortEntry OBJECT-TYPE
-- SYNTAX Dot3adAggPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of Link Aggregation Control configuration
-- parameters for each Aggregation Port on this device."
-- INDEX { dot3adAggPortIndex }
-- ::= { dot3adAggPortTable 1 }
-- Dot3adAggPortEntry ::=
-- SEQUENCE {
-- dot3adAggPortIndex
-- INTEGER,
-- dot3adAggPortMode
-- INTEGER
-- }
--
-- dot3adAggPortIndex OBJECT-TYPE
-- SYNTAX INTEGER(0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The ifIndex of the port."
-- REFERENCE
-- "IEEE 802.3 Section 30.7.2.1.1"
-- ::= { dot3adAggPortEntry 1 }
-- dot3adAggPortMode OBJECT-TYPE
-- SYNTAX INTEGER{
-- other(1),
-- active(2),
-- passive(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " The aggregrate mode of the port."
-- ::= { dot3adAggPortEntry 2 }
--
-- ****************
-- add by ynot 2004-1-6
-- ********
-- loadPortSeg OBJECT-TYPE
-- SYNTAX INTEGER{
-- other(1),
-- load(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "After loading port segmentation, the switch must reboot."
-- ::= { loadPortSegmentation 1 }
-- ********************************************************************
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 }
-- ********************************************************************
-- swL2TrafficCtrlTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2TrafficCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table specifies the storm traffic control configuration."
-- ::= { swL2TrafficMgmt 1 }
--
-- swL2TrafficCtrlEntry OBJECT-TYPE
-- SYNTAX SwL2TrafficCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information specifies the storm traffic control
-- configuration."
-- INDEX { swL2TrafficCtrlGroupIndex }
-- ::= { swL2TrafficCtrlTable 1 }
--
-- SwL2TrafficCtrlEntry ::=
-- SEQUENCE {
-- swL2TrafficCtrlGroupIndex
-- INTEGER,
-- swL2TrafficCtrlUnitIndex
-- INTEGER,
-- swL2TrafficCtrlBMStromthreshold
-- INTEGER,
-- swL2TrafficCtrlBcastStromCtrl
-- INTEGER,
-- swL2TrafficCtrlMcastStromCtrl
-- INTEGER,
-- swL2TrafficCtrlDlfStromCtrl
-- INTEGER
-- }
--
-- swL2TrafficCtrlGroupIndex OBJECT-TYPE
-- SYNTAX INTEGER (0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The index of the logical port trunk. The trunk group number depends
-- on the existence of a unit and module."
-- ::= { swL2TrafficCtrlEntry 1 }
--
-- swL2TrafficCtrlUnitIndex OBJECT-TYPE
-- SYNTAX INTEGER (0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates the ID of the unit in the device."
-- ::= { swL2TrafficCtrlEntry 2 }
--
-- swL2TrafficCtrlBMStromthreshold OBJECT-TYPE
-- SYNTAX INTEGER (64..1024000)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object decides how many thousand packets per second
-- broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl,
-- swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlDlfStromCtrl
-- objects whether is enabled) will activate storm control. Whenever
-- a port reaches its configured amount of packets in the one
-- second time interval, the device will start dropping that type
-- of packet, until the time interval has expired. Once the time
-- interval has expired, the device will start forwarding that type
-- of packet."
-- ::= { swL2TrafficCtrlEntry 3 }
--
--
-- swL2TrafficCtrlBcastStromCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates whether the broadcast storm control function is
-- enabled or disabled."
-- ::= { swL2TrafficCtrlEntry 4 }
--
-- swL2TrafficCtrlMcastStromCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates whether the multicast storm control function is
-- enabled or disabled."
-- ::= { swL2TrafficCtrlEntry 5 }
--
-- swL2TrafficCtrlDlfStromCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates whether the destination lookup fail function is
-- enabled or disabled."
-- ::= { swL2TrafficCtrlEntry 6 }
-- ********************************************************************
-- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
-- ********************************************************************
swL2TrafficSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the port just can forward traffic to the
specific port list."
::= { swL2TrafficSegMgmt 1 }
swL2TrafficSegEntry OBJECT-TYPE
SYNTAX SwL2TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specifies the port with its traffic
forward list."
INDEX { swL2TrafficSegPort }
::= { swL2TrafficSegTable 1 }
SwL2TrafficSegEntry ::=
SEQUENCE {
swL2TrafficSegPort
INTEGER,
swL2TrafficSegForwardPorts
PortList
}
swL2TrafficSegPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the logical port."
::= { swL2TrafficSegEntry 1 }
swL2TrafficSegForwardPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port list that the specific port can forward traffic."
::= { swL2TrafficSegEntry 2 }
-- ********************************************************************
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
-- ********************************************************************
swL2PortSecurityControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port security feature controls the address leaning capability and the
traffic forwarding decision. Each port can have this function enabled or disabled.
When it is enabled and a number is given said N, which allows N addresses to be
learned at this port, the first N learned addresses are locked at this port as
a static entry. When the learned address number reaches N, any incoming packet without
learned source addresses are discarded (e.g. dropped) and no more new addresses
can be learned at this port."
::= { swL2PortSecurityMgmt 1 }
swL2PortSecurityControlEntry OBJECT-TYPE
SYNTAX SwL2PortSecurityControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2PortSecurityControlTable."
INDEX { swL2PortSecurityPortIndex }
::= { swL2PortSecurityControlTable 1 }
SwL2PortSecurityControlEntry ::=
SEQUENCE {
swL2PortSecurityPortIndex
INTEGER,
swL2PortSecurityMaxLernAddr
INTEGER,
swL2PortSecurityMode
INTEGER,
swL2PortSecurityAdmState
INTEGER
}
swL2PortSecurityPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates a secured port to lock address learning."
::= { swL2PortSecurityControlEntry 1 }
swL2PortSecurityMaxLernAddr OBJECT-TYPE
SYNTAX INTEGER (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the allowable number of addresses to be learned at this port."
::= { swL2PortSecurityControlEntry 2 }
swL2PortSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
other(1),
permanent(2),
deleteOnTimeout(3),
deleteOnReset(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of locking address.
In deleteOnTimeout (3) mode - the locked addresses can be aged out after the aging timer
expires. In this mode, when the locked address is aged
out, the number of addresses that can be learned has to be
increased by one.
In deleteOnReset (4) mode - never age out the locked addresses unless restarting
the system to prevent port movement or intrusion."
::= { swL2PortSecurityControlEntry 3 }
swL2PortSecurityAdmState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates an administration state of locking address."
::= { swL2PortSecurityControlEntry 4 }
-- ********************************************************************
swL2PortSecurityTrapLogState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled (2), whenever there's a new MAC that violates the pre-defined
port security configuration, a trap will be sent out and the relevant information
will be logged in the system."
::= { swL2PortSecurityMgmt 2 }
-- ******************************************************
-- Port Security Del Ctrl Table
-- ******************************************************
swL2PortSecurityDelCtrl OBJECT IDENTIFIER ::= { swL2PortSecurityMgmt 3 }
swL2PortSecurityDelVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN name."
::= { swL2PortSecurityDelCtrl 1 }
swL2PortSecurityDelPort OBJECT-TYPE
SYNTAX INTEGER (0..768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the port. 0 means the function dose not work now."
::= { swL2PortSecurityDelCtrl 2 }
swL2PortSecurityDelMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the MAC address."
::= { swL2PortSecurityDelCtrl 3 }
swL2PortSecurityDelActivity OBJECT-TYPE
SYNTAX INTEGER {
none(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { swL2PortSecurityDelCtrl 4 }
-- ********************************************************************
-- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
-- ********************************************************************
-- swMSTPGblCtrl OBJECT IDENTIFIER ::= { swL2StpMgmt 1 }
--
-- swL2STPStpForwardBPDU OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used to forward BPDU to
-- non STP port."
-- ::= { swMSTPGblCtrl 1 }
--
-- swL2STPStpLBD OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used for Loop-back prevention."
-- ::= { swMSTPGblCtrl 2 }
--
--
-- swL2STPPortCtrl OBJECT IDENTIFIER ::= { swL2StpMgmt 2 }
-- swL2STPPortTable OBJECT-TYPE
-- swL2STPPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2STPPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table that contains port-specific information
-- for the Spanning Tree Protocol."
-- ::= { swL2STPPortCtrl 4 }
--
-- swL2STPPortEntry OBJECT-TYPE
-- SYNTAX SwL2STPPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information maintained by every port
-- about the Spanning Tree Protocol state for that
-- port."
-- INDEX { swL2STPPort }
-- ::= { swL2STPPortTable 1 }
--
-- SwL2STPPortEntry ::= SEQUENCE {
-- swL2STPPort
-- INTEGER,
-- swL2STPPortLBD
-- INTEGER,
-- swL2STPPortState
-- INTEGER
-- }
--
-- swL2STPPort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The port number of the port for this entry."
-- ::= { swL2STPPortEntry 1}
--
-- swL2STPPortLBD OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used for Loop-back prevention attached
-- to this port."
-- ::= { swL2STPPortEntry 2 }
--
-- swL2STPPortState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used for Loop-back prevention attached
-- to this port."
-- ::= { swL2STPPortEntry 3 }
-- swL2StpForwardBPDU OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicates whether to flood BPDU packets when STP is disabled on the device."
-- ::= { swL2StpMgmt 1 }
--
-- swL2StpLbd OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicates whether STP loop-back prevention on the device is turned on."
-- ::= { swL2StpMgmt 2 }
--
--
-- swL2StpLbdRecoverTime OBJECT-TYPE
-- SYNTAX INTEGER (0..1000000)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The period of time the STP module keeps checking the BPDU loop status,
-- to configure swL2StpLbdRecoverTime as 0 disables automatically recover."
-- ::= { swL2StpMgmt 3 }
--
--
-- swL2StpPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2StpPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table that contains port-specific information
-- for the Spanning Tree Protocol."
-- ::= { swL2StpMgmt 4 }
--
-- swL2StpPortEntry OBJECT-TYPE
-- SYNTAX SwL2StpPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information maintained by every port
-- about the Spanning Tree Protocol state for that
-- port."
-- INDEX { swL2StpPort }
-- ::= { swL2StpPortTable 1 }
--
-- SwL2StpPortEntry ::= SEQUENCE {
-- swL2StpPort
-- INTEGER,
-- swL2StpPortLbd
-- INTEGER,
-- swL2StpPortStatus
-- INTEGER,
-- swL2StpPortRole
-- INTEGER,
-- swL2StpPortFBPDU
-- INTEGER,
-- swL2StpPortLinkState
-- INTEGER,
-- swL2StpPortProtocolMigration
-- TruthValue,
-- swL2StpPortAdminEdgePort
-- TruthValue,
-- swL2StpPortOperEdgePort
-- TruthValue,
-- swL2StpPortAdminPointToPoint
-- INTEGER,
-- swL2StpPortOperPointToPoint
-- TruthValue,
-- swL2StpPortAdminPathCost
-- Unsigned32,
-- swL2StpPortPriority
-- INTEGER,
-- swL2STPPortState
-- INTEGER
-- }
--
-- swL2StpPort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The port number of the port for this entry."
-- ::= { swL2StpPortEntry 1}
--
-- swL2StpPortLbd OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used for Loop-back prevention attached
-- to this port."
-- ::= { swL2StpPortEntry 2 }
--
-- swL2StpPortStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- discarding(3),
-- learning(4),
-- forwarding(5),
-- broken(6),
-- no-stp-enabled(7),
-- err-disabled(8)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "When the port Enable state is enabled, the port's current
-- state as defined by application of the Spanning Tree Protocol.
-- If the PortEnable is disabled, the port status will be
-- no-STP-enabled (7).
-- If the port is in error disabled status, the port status will be err-disabled (8)"
-- ::= { swL2StpPortEntry 3 }
--
-- swL2StpPortRole OBJECT-TYPE
-- SYNTAX INTEGER {
-- disabled(1),
-- alternate(2),
-- backup(3),
-- root(4),
-- designated(5),
-- nonStp(6),
-- loopback(7)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "When the port Enable state is enabled, the port's current
-- port role as defined by application of the Spanning Tree Protocol.
-- If the Port Enable state is disabled, the port role will be
-- nonstp (7). If the port is in loop-back status, the port role will
-- be loopback (8)"
-- ::= { swL2StpPortEntry 4 }
--
-- swL2StpPortFBPDU OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used for BPDU Filtering attached
-- to this port."
-- ::= { swL2StpPortEntry 5 }
--
-- swL2StpPortLinkState OBJECT-TYPE
-- SYNTAX INTEGER {
-- link-down(1),
-- half-10Mbps-none(2),
-- half-10Mbps-backp(3),
-- full-10Mbps-none(4),
-- full-10Mbps-8023x(5),
-- half-100Mbps-none(6),
-- half-100Mbps-backp(7),
-- full-100Mbps-none(8),
-- full-100Mbps-8023x(9),
-- half-1000Mbps-none(10),
-- full-1000Mbps-backp(11),
-- full-1000Mbps-none(12),
-- full-1000Mbps-8023x(13)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the STP port speed and duplex mode."
-- ::= { swL2StpPortEntry 6 }
--
-- swL2StpPortProtocolMigration OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "When operating in RSTP (version 2) mode, writing TRUE (1)
-- for this object forces this port to transmit RSTP BPDUs.
-- Any other operation on this object has no effect and
-- it always returns FALSE (2) when read."
-- REFERENCE
-- "IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
-- ::= { swL2StpPortEntry 7 }
--
-- swL2StpPortAdminEdgePort OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The administrative value of the Edge Port parameter. A
-- value of TRUE (1) indicates that this port should be
-- assumed as an edge-port and a value of FALSE (2) indicates
-- that this port should be assumed as a non-edge-port."
-- REFERENCE
-- "IEEE 802.1t clause 14.8.2, 18.3.3"
-- ::= { swL2StpPortEntry 8 }
--
-- swL2StpPortOperEdgePort OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The operational value of the Edge Port parameter. The
-- object is initialized to the value of
-- swL2StpPortAdminEdgePort and is set FALSE on reception of
-- a BPDU."
-- REFERENCE
-- "IEEE 802.1t clause 14.8.2, 18.3.4"
-- ::= { swL2StpPortEntry 9 }
--
-- swL2StpPortAdminPointToPoint OBJECT-TYPE
-- SYNTAX INTEGER {
-- forceTrue(0),
-- forceFalse(1),
-- auto(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The administrative point-to-point status of the LAN segment
-- attached to this port. A value of forceTrue (0) indicates that
-- this port should always be treated as if it is connected to
-- a point-to-point link. A value of forceFalse (1) indicates
-- that this port should be treated as having a shared media
-- connection. A value of auto (2) indicates that this port is
-- considered to have a point-to-point link if it is an Aggregator
-- and all of its members are aggregatable, or if the MAC entity
-- is configured for full duplex operation, either through
-- auto-negotiation or by management means."
-- REFERENCE
-- "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
-- ::= { swL2StpPortEntry 10 }
--
-- swL2StpPortOperPointToPoint OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The operational point-to-point status of the LAN segment
-- attached to this port. It indicates whether a port is
-- considered to have a point-to-point connection or not.
-- The value is determined by management or by auto-detection,
-- as described in the swL2StpPortAdminPointToPoint object."
-- REFERENCE
-- "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
-- ::= { swL2StpPortEntry 11}
--
-- swL2StpPortAdminPathCost OBJECT-TYPE
-- SYNTAX Unsigned32(0..200000000)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The administratively assigned value for the contribution
-- of this port to the path cost of paths towards the spanning
-- tree root.
--
-- Writing a value of '0' assigns the automatically calculated
-- default Path Cost value to the port. If the default Path
-- Cost is being used, this object returns '0' when read.
--
-- This complements the object swL2StpPortPathCost, which
-- returns the operational value of the path cost.
--
-- Issue No.: 3250R2-077
-- As USE_RSTP is 1:enabled, swL2StpPortPathCost is forced to be read-only.
-- configuration via swL2StpPortAdminPathCost.
-- According 802.1w, value range of swL2StpPortAdminPathCost would be expanded.
-- the former value range is (0..65535), the new is (0..200000000). "
--
-- REFERENCE
-- "IEEE 802.1D-1998: Section 8.5.5.3"
-- ::= { swL2StpPortEntry 12}
--
-- swL2StpPortPriority OBJECT-TYPE
-- SYNTAX INTEGER (0..240)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The value of the priority field which is
-- contained in the first (in network byte order)
-- octet of the (2 octet long) Port ID. The other
-- octet of the Port ID is given by the value of
-- swL2StpPort."
-- REFERENCE
-- "IEEE 802.1D-1990: Section 4.5.5.1"
-- ::= { swL2StpPortEntry 13 }
--
-- swL2STPPortState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used by loop-back prevention attached
-- to this port."
-- ::= { swL2StpPortEntry 14 }
--
-- ********************************************************************
-- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
-- ********************************************************************
swL2CosPriorityCtrl OBJECT IDENTIFIER ::= { swL2CosMgmt 3 }
swL2CosPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show and configure per port priority-based QoS features on the switch."
::= { swL2CosPriorityCtrl 1 }
swL2CosPriorityEntry OBJECT-TYPE
SYNTAX SwL2CosPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2CosPriorityTable."
INDEX { swL2CosPriorityPort }
::= { swL2CosPriorityTable 1 }
SwL2CosPriorityEntry ::=
SEQUENCE {
swL2CosPriorityPort
INTEGER,
swL2CosPriorityPortPRI
INTEGER,
swL2CosPriorityEtherPRI
INTEGER,
swL2CosPriorityIpPRI
INTEGER,
swL2CosPriorityNone
INTEGER
}
swL2CosPriorityPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of CoS Priority."
::= { swL2CosPriorityEntry 1 }
swL2CosPriorityPortPRI OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the port_priority state for CoS."
::= { swL2CosPriorityEntry 2 }
swL2CosPriorityEtherPRI OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
ether8021p(2),
macBase(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Ethernet frame based priority.
When set ether8021p (2), enable 802.1p QoS; When set macBase (3), enable MAC-based QoS;
When set disable (1), disable Ethernet frame based priority."
::= { swL2CosPriorityEntry 3 }
swL2CosPriorityIpPRI OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
tos(2),
dscp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable IP priority QoS.
When set tos (2), enable TOS based QoS; When set dscp (3), enable DSCP based QoS;
When set disable (1), disable IP priority QoS."
::= { swL2CosPriorityEntry 4 }
swL2CosPriorityNone OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When read, it always returns invalid (2);
when write valid (1), it disables all priority in this table."
::= { swL2CosPriorityEntry 5 }
swL2CosPortPRITable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosPortPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show port-to-class mappings and
map specific port to one of the hardware queues available on the switch."
::= { swL2CosPriorityCtrl 2 }
swL2CosPortPRIEntry OBJECT-TYPE
SYNTAX SwL2CosPortPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2CosPortPRITable."
INDEX { swL2CosPortPRIIndex }
::= { swL2CosPortPRITable 1 }
SwL2CosPortPRIEntry ::=
SEQUENCE {
swL2CosPortPRIIndex
INTEGER,
swL2CosPortPRIClass
INTEGER
}
swL2CosPortPRIIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the CoS Priority PortPRI."
::= { swL2CosPortPRIEntry 1 }
swL2CosPortPRIClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set one, you must have administrator privileges.
And you can set a value of 0 or 3 only, you can't set a value 1 or 2."
::= { swL2CosPortPRIEntry 2 }
swL2CosMacBasePRITable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosMacBasePRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show MAC priority map to traffic class and
map the destination MAC address in incoming packet to one of the hardware queues available on the switch."
::= { swL2CosPriorityCtrl 3 }
swL2CosMacBasePRIEntry OBJECT-TYPE
SYNTAX SwL2CosMacBasePRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2CosMacBasePRITable."
INDEX { swL2CosMacBasePRIIndex }
::= { swL2CosMacBasePRITable 1 }
SwL2CosMacBasePRIEntry ::=
SEQUENCE {
swL2CosMacBasePRIIndex
MacAddress,
swL2CosMacBasePRIClass
INTEGER
}
swL2CosMacBasePRIIndex OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the CoS Priority MacBasePRI."
::= { swL2CosMacBasePRIEntry 1 }
swL2CosMacBasePRIClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set one, you must have administrator privileges."
::= { swL2CosMacBasePRIEntry 2 }
swL2CosTosPRITable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosTosPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show TOS value to traffic class mapping and
map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch."
::= { swL2CosPriorityCtrl 4 }
swL2CosTosPRIEntry OBJECT-TYPE
SYNTAX SwL2CosTosPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2CosTosPRITable."
INDEX { swL2CosTosPRIIndex }
::= { swL2CosTosPRITable 1 }
SwL2CosTosPRIEntry ::=
SEQUENCE {
swL2CosTosPRIIndex
INTEGER,
swL2CosTosPRIClass
INTEGER
}
swL2CosTosPRIIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the CoS Priority TosPRI."
::= { swL2CosTosPRIEntry 1 }
swL2CosTosPRIClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set one, you must have administrator privileges."
::= { swL2CosTosPRIEntry 2 }
swL2CosDscpPRITable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosDscpPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show DSCP value to traffic class mapping and
map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch."
::= { swL2CosPriorityCtrl 5 }
swL2CosDscpPRIEntry OBJECT-TYPE
SYNTAX SwL2CosDscpPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in the swL2CosDscpPRITable."
INDEX { swL2CosDscpPRIIndex }
::= { swL2CosDscpPRITable 1 }
SwL2CosDscpPRIEntry ::=
SEQUENCE {
swL2CosDscpPRIIndex
INTEGER,
swL2CosDscpPRIClass
INTEGER
}
swL2CosDscpPRIIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the CoS Priority DscpPRI."
::= { swL2CosDscpPRIEntry 1 }
swL2CosDscpPRIClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set one, you must have administrator privileges."
::= { swL2CosDscpPRIEntry 2 }
-- ********************************************************************
-- swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
-- ********************************************************************
swL2DhcpRelayState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates whether the DHCP relay function is enabled or
disabled."
::= { swL2DhcpRelayMgmt 1 }
swL2DhcpRelayHopCount OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the maximum number of router hops that
the DHCP packets can cross."
::= { swL2DhcpRelayMgmt 2 }
swL2DhcpRelayTimeThreshold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the minimum time in seconds within which
the switch must relay the DHCP request. If this time is
exceeded, the switch will drop the DHCP packet."
::= { swL2DhcpRelayMgmt 3 }
swL2DhcpRelayOption82State OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates DHCP relay agent information option 82
function is enabled or disabled."
::= { swL2DhcpRelayMgmt 4 }
swL2DhcpRelayOption82Check OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the checking mechanism of DHCP relay agent
information option 82 is enabled or disabled."
::= { swL2DhcpRelayMgmt 5 }
swL2DhcpRelayOption82Policy OBJECT-TYPE
SYNTAX INTEGER {
replace(1),
drop(2),
keep(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the reforwarding policy of DHCP relay agent
information option 82.
replace (1) - Replace the exiting option 82 field in messages.
drop (2) - Discard messages with existing option 82 field.
keep (3) - Retain the existing option 82 field in messages."
::= { swL2DhcpRelayMgmt 6 }
swL2DhcpRelayCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DhcpRelayCtrlEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table specifies the IP address as a destination to forward
(relay) DHCP packets to."
::= { swL2DhcpRelayMgmt 7 }
swL2DhcpRelayCtrlEntry OBJECT-TYPE
SYNTAX SwL2DhcpRelayCtrlEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of information specifies the IP address as a destination
to forward (relay) DHCP packets to."
INDEX { swL2DhcpRelayCtrlInterfaceName, swL2DhcpRelayCtrlServer}
::= { swL2DhcpRelayCtrlTable 1 }
SwL2DhcpRelayCtrlEntry ::=
SEQUENCE {
swL2DhcpRelayCtrlInterfaceName
DisplayString,
swL2DhcpRelayCtrlServer
IpAddress,
swL2DhcpRelayCtrlState
INTEGER
}
swL2DhcpRelayCtrlInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..12))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The name of the IP interface."
::= { swL2DhcpRelayCtrlEntry 1 }
swL2DhcpRelayCtrlServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP server IP address."
::= { swL2DhcpRelayCtrlEntry 2 }
swL2DhcpRelayCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
valid(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object indicates the status of this entry.
other (1) - This entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid (2) - Writing this value to the object, and then the
corresponding entry will be removed from the table.
valid (3) - This entry resides in the table."
::= { swL2DhcpRelayCtrlEntry 3 }
-- ********************************************************************
-- swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
-- ********************************************************************
-- swL2LimitedMulticastTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2LimitedMulticastEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "."
-- ::= { swL2LimitedMulticastMgmt 1 }
--
-- swL2LimitedMulticastEntry OBJECT-TYPE
-- SYNTAX SwL2LimitedMulticastEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information contained in the swL2LimitedMulticastTable."
-- INDEX { swL2LimitedMulticastPortIndex }
-- ::= { swL2LimitedMulticastTable 1 }
--
-- SwL2LimitedMulticastEntry ::=
-- SEQUENCE {
-- swL2LimitedMulticastPortIndex
-- INTEGER,
-- swL2LimitedMulticastFromIp
-- IpAddress,
-- swL2LimitedMulticastToIp
-- IpAddress,
-- swL2LimitedMulticastAccess
-- INTEGER,
-- swL2LimitedMulticastState
-- INTEGER
-- }
--
-- swL2LimitedMulticastPortIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates the port ."
-- ::= { swL2LimitedMulticastEntry 1 }
--
-- swL2LimitedMulticastFromIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2LimitedMulticastEntry 2 }
--
-- swL2LimitedMulticastToIp OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2LimitedMulticastEntry 3 }
--
-- swL2LimitedMulticastAccess OBJECT-TYPE
-- SYNTAX INTEGER{
-- none(1),
-- permit(2),
-- deny(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2LimitedMulticastEntry 4 }
--
-- swL2LimitedMulticastState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2LimitedMulticastEntry 5 }
--
-- swL2LimitedMulticastResetPort OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object resets the Limited Multicast address on the specified port.
-- It always returns null."
-- ::= { swL2LimitedMulticastMgmt 2 }
-- ********************************************************************
-- Layer 2 Trap
-- ********************************************************************
swL2MgmtMIBTrapPrefix OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 0 }
swL2PortSecurityViolationTrap NOTIFICATION-TYPE
OBJECTS { swL2PortSecurityPortIndex,
swL2PortSecurityViolationMac
}
STATUS current
DESCRIPTION
"When the port_security trap is enabled, if there's a new MAC that violates the pre-defined
port security configuration, a trap will be sent out."
::= { swL2MgmtMIBTrapPrefix 1 }
swL2macNotification NOTIFICATION-TYPE
OBJECTS {
swL2macNotifyInfo
}
STATUS current
DESCRIPTION
" This trap indicates the MAC address variations in the address table. "
::= { swL2MgmtMIBTrapPrefix 2 }
swL2FloodMacDetectedTrap NOTIFICATION-TYPE
OBJECTS {
swL2FloodMacDetectedMacVid,
swL2FloodMacDetectedMacAddress
}
STATUS current
DESCRIPTION
" If there<72><65>s a new flooding MAC is detected, a trap will be sent out."
::= { swL2MgmtMIBTrapPrefix 3 }
swL2PortLoopOccurred NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex
}
STATUS current
DESCRIPTION
"The trap is sent when a Port loop occurs."
::={swL2MgmtMIBTrapPrefix 4}
swL2PortLoopRestart NOTIFICATION-TYPE
OBJECTS
{
swL2LoopDetectPortIndex
}
STATUS current
DESCRIPTION
"The trap is sent when a Port loop restarts after the interval time."
::={swL2MgmtMIBTrapPrefix 5}
swl2PortSecurityBindings OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 }
swL2PortSecurityViolationMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the MAC address that violates the port security configuration."
::= { swl2PortSecurityBindings 1 }
swl2NotificationBindings OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 2 }
swL2macNotifyInfo OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last time reboot information.
"
::= { swl2NotificationBindings 1 }
swL2FloodMacDetectedMacVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the flooding MAC."
::= { swl2NotificationBindings 2 }
swL2FloodMacDetectedMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address of the flooding MAC"
::= { swl2NotificationBindings 3 }
-- ********************************************************************
-- swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 21 }
-- ********************************************************************
swL2LoopDetectCtrl OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 1 }
swL2LoopDetectAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection status for the system."
::= { swL2LoopDetectCtrl 1 }
swL2LoopDetectInterval OBJECT-TYPE
SYNTAX INTEGER (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interval value, the range is from 1 to 32767 seconds."
::= { swL2LoopDetectCtrl 2 }
swL2LoopDetectRecoverTime OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the recover time, the range is from 60 to 1000000.
The value of 0 disables the recover function."
::= { swL2LoopDetectCtrl 3 }
-- swL2LoopDetectMode OBJECT-TYPE
-- SYNTAX INTEGER {
-- vlan-based(1),
-- port-based(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates the loopback detection mode for the system."
-- ::= { swL2LoopDetectCtrl 4 }
swL2LoopDetectTrapMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
loop_detected(2),
loop_cleared(3),
both(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection trap mode for the system."
::= { swL2LoopDetectCtrl 5 }
--***************************************************************************
swL2LoopDetectPortMgmt OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 2 }
swL2LoopDetectPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2LoopDetectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table specifies the loopback detection function specified by port."
::= { swL2LoopDetectPortMgmt 1 }
swL2LoopDetectPortEntry OBJECT-TYPE
SYNTAX SwL2LoopDetectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table specifies the loopback detection function specified by port."
INDEX { swL2LoopDetectPortIndex }
::= { swL2LoopDetectPortTable 1 }
SwL2LoopDetectPortEntry ::=
SEQUENCE {
swL2LoopDetectPortIndex
INTEGER,
swL2LoopDetectPortState
INTEGER,
-- swL2LoopDetectPortLoopVLAN
-- DisplayString,
swL2LoopDetectPortLoopStatus
INTEGER
}
swL2LoopDetectPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module"
::= { swL2LoopDetectPortEntry 1 }
swL2LoopDetectPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection function state on the port."
::= { swL2LoopDetectPortEntry 2 }
-- swL2LoopDetectPortLoopVLAN OBJECT-TYPE
-- SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the VLAN list that has detected a loopback."
-- ::= { swL2LoopDetectPortEntry 3 }
swL2LoopDetectPortLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
loop(2),
error(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port status."
::= { swL2LoopDetectPortEntry 4 }
-- ********************************************************************
-- swL2MultiFilter OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
-- ********************************************************************
swL2McastFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2McastFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about the multicast filter address."
::={swL2MultiFilter 2}
swL2McastFilterEntry OBJECT-TYPE
SYNTAX SwL2McastFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of multicast filter mode information for each profile ID. "
INDEX {swL2McastFilterProfileIndex}
::={swL2McastFilterTable 1}
SwL2McastFilterEntry ::=
SEQUENCE{
swL2McastFilterProfileIndex
INTEGER,
swL2McastFilterProfileName
DisplayString,
swL2McastFilterAddOrDelState
INTEGER,
swL2McastFilterGroupList
DisplayString,
swL2McastFilterStatus
RowStatus
}
swL2McastFilterProfileIndex OBJECT-TYPE
SYNTAX INTEGER(1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" index for each profile"
::={swL2McastFilterEntry 1}
swL2McastFilterProfileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast filter description."
::={swL2McastFilterEntry 2}
swL2McastFilterAddOrDelState OBJECT-TYPE
SYNTAX INTEGER{
none(1),
add(2),
delete(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control multicast filter address."
::={swL2McastFilterEntry 3}
swL2McastFilterGroupList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast filter address group list."
::={swL2McastFilterEntry 4}
swL2McastFilterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2McastFilterEntry 5 }
--*********************************************************************************
swL2McastFilterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2McastFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that is used to bind port to profile ID."
::={swL2MultiFilter 3}
swL2McastFilterPortEntry OBJECT-TYPE
SYNTAX SwL2McastFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information that is used to bind port to profile ID. "
INDEX {swL2McastFilterPortGroupPortIndex}
::={swL2McastFilterPortTable 1}
SwL2McastFilterPortEntry ::=
SEQUENCE{
swL2McastFilterPortGroupPortIndex
INTEGER,
swL2McastFilterPortProfileAddOrDelState
INTEGER,
swL2McastFilterPortProfileID
INTEGER
}
swL2McastFilterPortGroupPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::={swL2McastFilterPortEntry 1}
swL2McastFilterPortProfileAddOrDelState OBJECT-TYPE
SYNTAX INTEGER{
none(1),
add(2),
delete(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control multicast filter profile."
::={swL2McastFilterPortEntry 2}
swL2McastFilterPortProfileID OBJECT-TYPE
SYNTAX INTEGER(0..24)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the profile ID of this entry.
When read, it is always 0.
When set, 0 can not be set."
::={swL2McastFilterPortEntry 3}
--*********************************************************************************
swL2McastFilterPortMaxGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2McastFilterPortMaxGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about the max group number based on port."
::={swL2MultiFilter 4}
swL2McastFilterPortMaxGroupEntry OBJECT-TYPE
SYNTAX SwL2McastFilterPortMaxGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of max group number information for each port."
INDEX {swL2McastFilterPortMaxGroupPortIndex}
::={swL2McastFilterPortMaxGroupTable 1}
SwL2McastFilterPortMaxGroupEntry ::=
SEQUENCE{
swL2McastFilterPortMaxGroupPortIndex
INTEGER,
swL2McastFilterPortMaxGroup
INTEGER
}
swL2McastFilterPortMaxGroupPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::={swL2McastFilterPortMaxGroupEntry 1}
swL2McastFilterPortMaxGroup OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max group numbers. The default is 256."
::= { swL2McastFilterPortMaxGroupEntry 2 }
swL2McastFilterPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2McastFilterPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains information about all of the multicast groups for the ports."
::={swL2MultiFilter 5}
swL2McastFilterPortInfoEntry OBJECT-TYPE
SYNTAX SwL2McastFilterPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information about all of the multicast groups for each port."
INDEX {swL2McastFilterPortInfoPortIndex}
::={swL2McastFilterPortInfoTable 1}
SwL2McastFilterPortInfoEntry ::=
SEQUENCE{
swL2McastFilterPortInfoPortIndex
INTEGER,
swL2McastFilterPortInfoProfileName
DisplayString
}
swL2McastFilterPortInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::={swL2McastFilterPortInfoEntry 1}
swL2McastFilterPortInfoProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast filter address profile Name."
::={swL2McastFilterPortInfoEntry 2}
-- ********************************************************************
-- swL2VlanMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
-- ********************************************************************
swL2VlanAdvertisementTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2VlanAdvertisementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the advertisement state for each
VLAN configured into the device by (local or
network) management."
::= { swL2VlanMgmt 1 }
swL2VlanAdvertisementEntry OBJECT-TYPE
SYNTAX SwL2VlanAdvertisementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The advertisement state for each VLAN configured
into the device."
INDEX { swL2VlanIndex }
::= { swL2VlanAdvertisementTable 1 }
SwL2VlanAdvertisementEntry ::=
SEQUENCE {
swL2VlanIndex
INTEGER,
swL2VlanName
DisplayString,
swL2VlanAdvertiseState
INTEGER
}
swL2VlanIndex OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier referring to this VLAN."
::= { swL2VlanAdvertisementEntry 1 }
swL2VlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the VLAN."
::= { swL2VlanAdvertisementEntry 2 }
swL2VlanAdvertiseState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the advertise status of this VLAN entry."
::= { swL2VlanAdvertisementEntry 3 }
swL2VlanMultiplyMgmt OBJECT IDENTIFIER ::= { swL2VlanMgmt 2 }
swL2VlanMultiplyVlanList OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLAN ID List."
::= { swL2VlanMultiplyMgmt 1 }
swL2VlanMultiplyAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the advertisement state."
::= { swL2VlanMultiplyMgmt 2 }
swL2VlanMultiplyPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port list."
::= { swL2VlanMultiplyMgmt 3 }
swL2VlanMultiplyPortListAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
add-tagged(2),
add-untagged(3),
add-forbidden(4),
delete(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action for the port list which specified
by swL2VlanMultiplyPortList."
::= { swL2VlanMultiplyMgmt 4 }
swL2VlanMultiplyAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
create(2),
configure(3),
delete(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action for VLANs.
other: no action.
create: the VLANs specified by swL2VlanMultiplyVlanList
would be created at a time.
configure: the VLANs specified by swL2VlanMultiplyVlanList
would be configured at a time.
delete: the VLANs specified by swL2VlanMultiplyVlanList
would be deleted at a time.
"
::= { swL2VlanMultiplyMgmt 5 }
-- ********************************************************************
-- swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 }
-- ********************************************************************
swL2DhcpLocalRelayState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the DHCP local relay
function of the switch."
::= { swL2DhcpLocalRelayMgmt 1 }
swL2DhcpLocalRelayVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2DhcpLocalRelayVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the DHCP local relay status
for each VLAN."
::={ swL2DhcpLocalRelayMgmt 2}
swL2DhcpLocalRelayVLANEntry OBJECT-TYPE
SYNTAX SwL2DhcpLocalRelayVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object lists the current VLANs in the switch and their
corresponding DHCP local relay status."
INDEX { swL2DhcpLocalRelayVLANID }
::={ swL2DhcpLocalRelayVLANTable 1 }
SwL2DhcpLocalRelayVLANEntry ::=
SEQUENCE{
swL2DhcpLocalRelayVLANID
INTEGER,
swL2DhcpLocalRelayVLANState
INTEGER
}
swL2DhcpLocalRelayVLANID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the VIDs of the current VLANS in the switch."
::= { swL2DhcpLocalRelayVLANEntry 1 }
swL2DhcpLocalRelayVLANState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of the DHCP relay function
of the VLAN."
::= { swL2DhcpLocalRelayVLANEntry 2 }
-- ********************************************************************
-- swL2FloodMAC OBJECT IDENTIFIER ::= { swL2MgmtMIB 25 }
-- ********************************************************************
swL2FloodMACMgmt OBJECT IDENTIFIER ::= { swL2FloodMAC 1 }
swL2FloodMACGlobalSettings OBJECT IDENTIFIER ::= { swL2FloodMACMgmt 1 }
swL2FloodMACState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of Flooding MAC function."
::= { swL2FloodMACGlobalSettings 1 }
swL2FloodMACLogState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether logs are generated when a flooding MAC is detected."
::= { swL2FloodMACGlobalSettings 2 }
swL2FloodMACTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether traps are generated when a flooding MAC is detected."
::= { swL2FloodMACGlobalSettings 3 }
swL2FloodMACClearFDB OBJECT-TYPE
SYNTAX INTEGER {
no-action(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to start(2), this object will clear the entries of swL2FloodMACFDBTable.
After the device finishes clearing the entries, it will return to its default value, no-action(1).
Setting this object to no-action(1) will not have any effect."
::= { swL2FloodMACGlobalSettings 4 }
swL2FloodMACAutoFDBCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2FloodMACAutoFDBCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of configured IP addresses to which the Auto FDB function
will discover the corresponding VLAN, MAC address and port and have a corresponding
static FDB entry created automatically."
::= { swL2FloodMACMgmt 2 }
swL2FloodMACAutoFDBCtrlEntry OBJECT-TYPE
SYNTAX SwL2FloodMACAutoFDBCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information containing the configured Auto FDB IP address."
INDEX {
swL2FloodMACAutoFDBIPAddress
}
::= { swL2FloodMACAutoFDBCtrlTable 1 }
SwL2FloodMACAutoFDBCtrlEntry ::=
SEQUENCE {
swL2FloodMACAutoFDBIPAddress
IpAddress,
swL2FloodMACAutoFDBRowStatus
RowStatus
}
swL2FloodMACAutoFDBIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Auto FDB IP address."
::= { swL2FloodMACAutoFDBCtrlEntry 1 }
swL2FloodMACAutoFDBRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swL2FloodMACAutoFDBCtrlEntry 2 }
swL2FloodMACInfo OBJECT IDENTIFIER ::= { swL2FloodMAC 2 }
swL2FloodMACFDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2FloodMACFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of current and historical flooding MAC entries."
::= { swL2FloodMACInfo 1 }
swL2FloodMACFDBEntry OBJECT-TYPE
SYNTAX SwL2FloodMACFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information containing the flooding MAC address."
INDEX {
swL2FloodMACFDBIndex,
swL2FloodMACFDBVID,
swL2FloodMACFDBMacAddress
}
::= { swL2FloodMACFDBTable 1 }
SwL2FloodMACFDBEntry ::=
SEQUENCE {
swL2FloodMACFDBIndex
INTEGER,
swL2FloodMACFDBVID
INTEGER,
swL2FloodMACFDBMacAddress
MacAddress,
swL2FloodMACFDBStatus
INTEGER,
swL2FloodMACFDBTimestamp
INTEGER
}
swL2FloodMACFDBIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hardware address table index of the flooding MAC entry."
::= { swL2FloodMACFDBEntry 1 }
swL2FloodMACFDBVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN identifier of the flooding MAC entry."
::= { swL2FloodMACFDBEntry 2 }
swL2FloodMACFDBMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the flooding MAC entry."
::= { swL2FloodMACFDBEntry 3 }
swL2FloodMACFDBStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the flooding MAC entry. When the value is 'active', this means
the entry is currently present in the hardware address table,
otherwise, the value is 'inactive'."
::= { swL2FloodMACFDBEntry 4 }
swL2FloodMACFDBTimestamp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number that correlates to a relative time the entry was detected by the Flooding MAC function."
::= { swL2FloodMACFDBEntry 5 }
swL2FloodMACAutoFDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2FloodMACAutoFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the discovered VLAN, MAC address and port of the host
with an IP address created in swL2FloodMACAutoFDBCtrlTable."
::= { swL2FloodMACInfo 2 }
swL2FloodMACAutoFDBEntry OBJECT-TYPE
SYNTAX SwL2FloodMACAutoFDBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information containing the discovered VLAN, MAC address and port of an Auto FDB entry."
INDEX {
swL2FloodMACAutoFDBIPAddress
}
::= { swL2FloodMACAutoFDBTable 1 }
SwL2FloodMACAutoFDBEntry ::=
SEQUENCE {
swL2FloodMACAutoFDBVID
INTEGER,
swL2FloodMACAutoFDBMacAddress
MacAddress,
swL2FloodMACAutoFDBPort
INTEGER,
swL2FloodMACAutoFDBTimestamp
INTEGER
}
swL2FloodMACAutoFDBVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier of Auto FDB entry."
::= { swL2FloodMACAutoFDBEntry 1 }
swL2FloodMACAutoFDBMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the Auto FDB entry."
::= { swL2FloodMACAutoFDBEntry 2 }
swL2FloodMACAutoFDBPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the Auto FDB entry."
::= { swL2FloodMACAutoFDBEntry 3 }
swL2FloodMACAutoFDBTimestamp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number that represents the relative time when the Auto FDB learned this entry."
::= { swL2FloodMACAutoFDBEntry 4 }
END
View Git Blame Copy Permalink