WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/d-link/DES3018-L2MGMT-MIB

3826 lines
130 KiB
Plaintext
Raw Blame History

-- firmware version 4.3
-- 2009/07.8
-- Request By Vic Li
-- [Modify Object]
-- [New Object]
-- add object sswL2DevCtrlVlanIdOfFDBTbl
--*****************************************************************************************
-- firmware version 4.3
-- 2009/05.31
-- Request By Wenxia yang
-- [Modify Object]
-- [New Object]
-- add object swL2DevCtrlLLDPState and swL2DevCtrlLLDPForwardMessageState
--*****************************************************************************************
-- firmware version 4.3
-- 2009/05.18
-- Request By Vic Li
-- [Modify Object]
-- [New Object]
-- add swL2IGMPRouterPortTable
--*****************************************************************************************
-- firmware version 4.3
-- 2008/12/24
-- Request By Robinson Yan for project DES30XXR4.3
-- [Modify Object]
-- Modify the range of the object "swL2StpPortAdminEdgePort" from TruthValue to (0-2)
-- [New Object]
-- add swL2STPPortRestrictedTCN swL2STPPortRestrictedTCN in swL2StpPortTable
--*****************************************************************************************
-- firmware version 4.2
-- 2008/8/13
-- Request By Maxvel Li for project DES30XXR4.2
-- Added swL2TrunkVLANTable
-- Added swL2DevCtrlVLANTrunkState
--*****************************************************************************************
-- firmware version 4.2 2008/3/27 by Vic
-- Request By Vic Li for project DES30xxR4.2
-- [New Object]
-- add object swL2PortCtrlMDIXState in swL2PortCtrlTable
-- *****************************************************************************************
-- firmware version 4.01.001 2007/5/16 by Nic
-- 1.Add a node swL2QOS8021pRadiusPriority in swL2QOS8021pDefaultPriorityTable
-- 2.Add node swL2QOSBandwidthRadiusRxRate and swL2QOSBandwidthRadiusTxRate in swL2QOSBandwidthControlTable.
-- *****************************************************************************************
-- firmware version 4.00.004 2007/3/1 by Yan
-- 1.Modify the range of the object "swL2QOSSchedulingClassIndex" from (1-4) to (0-3)
-- 2.Add swL2LoopDetectMgmt.
-- *****************************************************************************************
-- D-Link Layer2 Switch Common MIB Ver 1.2 2001/10/03
--
-- LinkAggregation(port trunking) , Port Mirroring and IGMP
DES3018-L2MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,
Integer32 FROM SNMPv2-SMI
IpAddress FROM RFC1155-SMI
RowStatus, TruthValue FROM SNMPv2-TC
DisplayString FROM RFC1213-MIB
des3018 FROM DLINK-SWPRIMGMT-MIB;
swL2MgmtMIB MODULE-IDENTITY
LAST-UPDATED "0007150000Z"
ORGANIZATION "D-Link, Inc."
CONTACT-INFO
" D-Link Customer Service
Postal: No. 20,Park Ave, II, Science-based
Industrial Park, Hsinchu, taiwan, R.O.C.
Tel: 886-3-577-9966
E-mail: "
DESCRIPTION
"The Structure of Common Management Information for
making a trunk and IGMP related function for
D-Link devices."
::= { des3018 2 }
VlanId ::= INTEGER (1..4094)
PortList ::= OCTET STRING(SIZE (0..127))
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
-- in the
-- "canonical"
-- order, copy from RFC1493
-- Textual Convention for PortList
-- Define the PortList, comes from RFC2674
swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 }
swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 }
-- lagMIBObjects OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
swIGMPPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
-- swPortRatePackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 }
-- swPortBindingPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
-- swPortBaseVlanMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 }
-- swPriToTrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
-- loadPortSegmentation OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 }
swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 19 }
swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 100 }
--*****************************
--add by ynot for lag
-- dot3adAggrPortMgmt OBJECT IDENTIFIER ::= { lagMIBObjects 1}
-- add for load traffic
--******************************
-- ********************************************************************
-- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 }
-- ********************************************************************
swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 }
--swL2DevInfoSystemUpTime OBJECT-TYPE
-- SYNTAX TimeTicks
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The value of sysUpTime at the time the switch entered its
-- current operational state. If the current state was entered
-- prior to the last re-initialization, then this object contains
-- a zero value. This value is in units of seconds."
-- ::= { swL2DevInfo 1 }
-- swL2DevInfoTotalNumOfPort OBJECT-TYPE
-- SYNTAX INTEGER (0..255)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The number of ports within this switch. This value is the sum
-- of the ports within this switch."
-- ::= { swL2DevInfo 2 }
-- swL2DevInfoNumOfPortInUse OBJECT-TYPE
-- SYNTAX INTEGER (0..255)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The number of ports in this switch connected to the segment or
-- the end stations."
-- ::= { swL2DevInfo 3 }
-- swL2DevInfoConsoleInUse OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- in-use(2),
-- not-in-use(3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This usage indication of console system."
-- ::= { swL2DevInfo 4 }
swL2DevInfoFrontPanelLedStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of system LED indications. The two
octets is defined as system LED. The first LED is power LED. The
second LED is console LED. The other octets following
the second octets are the logical port LED (following dot1dBasePort
ordering). Every two bytes are presented to a port. The first
byte is presentd to the Link/Activity LED. The second byte is
presented to the Speed LED.
Link/Activity LED :
The most significant bit is used for blink/solid:
8 = The LED blinks.
The second significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The four remaining bits are currently unused and must be 0.
"
::= { swL2DevInfo 5 }
swL2Module-1-Type OBJECT-TYPE
SYNTAX INTEGER {
none(0),
moduleType-DEM-301T(1),
moduleType-DEM-201F(2),
moduleType-DEM-301G(3),
moduleType-COMBA(4),
moduleType-DEM-201FL(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module type."
::= { swL2DevInfo 6 }
swL2Module-2-Type OBJECT-TYPE
SYNTAX INTEGER {
none(0),
moduleType-DEM-301T(1),
moduleType-DEM-201F(2),
moduleType-DEM-301G(3),
moduleType-COMBA(4),
moduleType-DEM-201FL(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module type."
::= { swL2DevInfo 7 }
--***************************************************************************************************************
swL2CPUutilization OBJECT IDENTIFIER ::= { swL2DevMgmt 3 }
swL2CPUutilizationIn5sec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time scale is 5 seconds.The value will be between 0%(idle) and 100%
(very busy)."
::= { swL2CPUutilization 1 }
swL2CPUutilizationIn1min OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time scale is 1 minute.The value will be between 0%(idle) and 100%
(very busy)."
::= { swL2CPUutilization 2 }
swL2CPUutilizationIn5min OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time scale is 5 minute.The value will be between 0%(idle) and 100%
(very busy)."
::= { swL2CPUutilization 3 }
-- -----------------------------------------------------------------------------
swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 4 }
swL2DevAlarmLinkChange OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether or not to send a trap message when the link
changes. If the object is enabled (3), the Link Change trap is sent by
the device when any of its port links change. The device does not send the
trap if this object value is disabled or in another state."
::= { swL2DevAlarm 3 }
-- *******************************************************
swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 }
swL2DevCtrlSystemReboot OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reboot(2),
save-config-and-reboot(3),
reboot-and-load-factory-default-config(4)
-- reboot-and-load-factory-default-config-except-ip-address(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the agent system reboot state. The agent always
returns other(1) when this object is read."
::= { swL2DevCtrl 1 }
swL2DevCtrlSystemIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates system ip."
::= { swL2DevCtrl 2 }
swL2DevCtrlSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates system subnet mask."
::= { swL2DevCtrl 3 }
swL2DevCtrlDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates system default gateway."
::= { swL2DevCtrl 4 }
swL2DevCtrlManagementVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls which Vlan includes system ip. And the Vlan
should have been created."
::= { swL2DevCtrl 5 }
swL2DevCtrlStpState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be enabled or disabled spanning tree algorithm
during runtime of the system."
::= { swL2DevCtrl 6 }
swL2DevCtrlIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates layer 2 Internet Group Management Protocol
(IGMP) capture function is enabled or disabled ."
::= { swL2DevCtrl 7 }
-- swL2DevCtrlBcastStormCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates broadcast storm control function is enabled or
-- disabled. The swL2PortCtrlBMDStormLimit object will descript the
-- detail about the storm control ."
-- ::= { swL2DevCtrl 8 }
--swL2DevCtrlMcastStormCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates multicast storm control function is enabled or
-- disabled. The swL2PortCtrlBMDStormLimit object will descript the
-- detail about the storm control ."
-- ::= { swL2DevCtrl 9 }
--swL2DevCtrlDestLookupFailureCtrl OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object indicates destination lookup failure rate control function
-- is enabled or disabled. The swL2PortCtrlBMDStormLimit object will
-- descript the detail about the storm control ."
-- ::= { swL2DevCtrl 10 }
-- swL2DevCtrlBMDStormLimit OBJECT-TYPE
-- SYNTAX INTEGER (0..262143)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object to decide how many broadcast/multicast (depend on
-- swL2DevCtrlBcastStormCtrl, swL2DevCtrlMcastStormCtrl or
-- swL2DevCtrlDestLookupFailureCtrlobjects whether is enabled) packets per second
-- will pass thru. Beyond the limit, the device will start dropping
-- that type of packet until the second interval has expired . Once the time
-- interval has expired , the device will start forwarding that type of packet."
-- ::= { swL2DevCtrl 11 }
swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"As the object is set to active, all the statistic counters will be cleared.
If set to normal, do nothing."
::= { swL2DevCtrl 12 }
swL2DevCtrlSnmpEnableAuthenTraps OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the SNMP entity is permitted to generate
authenticationFailure traps. The value of this object
overrides any configuration information; as such, it
provides a means whereby all authenticationFailure traps may
be disabled.
Note that it is strongly recommended that this object be
stored in non-volatile memory so that it remains constant
across re-initializations of the network management system."
::= { swL2DevCtrl 13 }
-- swL2DevCtrlFilterEAPOLPDU OBJECT-TYPE
-- SYNTAX INTEGER { yes(1), no(2) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicates whether to filter the EAPOL PDU. If the administrative
-- state for Port Access Control in a System is enabled, this object
-- is meaningless. Otherwise, when this object is yes(1), the EAPOL
-- packets will be dropped. When this object is no(2), the EAPOL
-- packets will pass."
-- ::= { swL2DevCtrl 14 }
--swL2DevCtrlTrafficSegmentation OBJECT-TYPE
-- SYNTAX INTEGER { enabled(1), disabled(2) }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "If this object is disabled(2), then no traffic segmentation.
-- When we set it to enabled(1), there are three conditions for the
-- traffic segmentation.
-- (1) If without plugging in option module, port 1 is the server port.
-- (2) If plugging in one-port module, the port on the module is the
-- server port.
-- (3) If plugging in two-port module, these two ports on the module are
-- the server ports.
-- Under this situation, other ports(Client ports) can only communicate
-- with the server port. Client ports can't communicate with each other."
-- ::= { swL2DevCtrl 15 }
swL2DevCtrlRmonState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be enabled or disabled RMON."
::= { swL2DevCtrl 16 }
swL2DevCtrlIpAutoConfig OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of automatically getting configuration from TFTP server on device"
::= { swL2DevCtrl 17 }
swL2PortCtrlMulticastfilter OBJECT-TYPE
SYNTAX INTEGER {
-- other(0),
-- forward-all-groups(1),
forward-unregistered-groups(2),
filter-unregistered-groups(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decide the multicast packets filtering mode on all port . "
::= { swL2DevCtrl 18 }
swL2MACNotifyState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enabled or disabled MAC Notification."
::= { swL2DevCtrl 19 }
swL2MACNotifyHistorySize OBJECT-TYPE
SYNTAX INTEGER (1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the history size of variation MAC in address table.
The default value is 1 ."
::= { swL2DevCtrl 20 }
swL2MACNotifyInterval OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the time interval in second for trigger the MAC notify message. "
::= { swL2DevCtrl 21 }
swL2DevCtrlVLANTrunkState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the global state of the VLAN trunking feature of the device."
::={swL2DevCtrl 22}
swL2DevCtrlLLDPState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the state of the LLDP function.
When this function is enabled, the switch can start to transmit
LLDP packets and receive and process the LLDP packets.
The specific function of each port will depend on the per port
LLDP setting.
For the advertisement of LLDP packets, the switch announces the
information to its neighbor through ports. For receiving
LLDP packets, the switch will learn the information from the LLDP
packets advertised from the neighbor in the neighbor table."
::= { swL2DevCtrl 23 }
swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When lldp is disabled and lldp forward_message's are enabled, the
LLDP Data Unit packets received by the switch will be forwarded. "
DEFVAL {disabled}
::={swL2DevCtrl 24}
swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN ID to which the Dot1dTpFdbTable belongs;
The default value is DEFAULT_VLAN_ID of the system."
::= { swL2DevCtrl 25 }
-- ********************************************************************
-- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
-- ********************************************************************
swL2PortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every port."
::= { swL2PortMgmt 1 }
swL2PortInfoEntry OBJECT-TYPE
SYNTAX SwL2PortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each port of the device."
INDEX { swL2PortInfoPortIndex }
::= { swL2PortInfoTable 1 }
SwL2PortInfoEntry ::=
SEQUENCE {
swL2PortInfoPortIndex
INTEGER,
--swL2PortInfoType
-- INTEGER,
-- swL2PortInfoDescr
-- DisplayString,
swL2PortInfoLinkStatus
INTEGER,
swL2PortInfoNwayStatus
INTEGER
}
swL2PortInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2PortInfoEntry 1 }
--swL2PortInfoType OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- portType-UTP(2),
-- portType-AUI(3),
-- portType-Fiber-MTRJ(4),
-- portType-Fiber-SC(5),
-- portType-Fiber-GBIC(6),
-- portType-BNC(7)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the connector type of this port."
-- ::= { swL2PortInfoEntry 2 }
--swL2PortInfoDescr OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..64))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Provides port type information in displayed string format"
-- ::= { swL2PortInfoEntry 3 }
swL2PortInfoLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
link-pass(2),
link-fail(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port link status."
::= { swL2PortInfoEntry 4 }
swL2PortInfoNwayStatus OBJECT-TYPE
SYNTAX INTEGER {
--other(1),
--half-10Mbps(2),
--full-10Mbps(3),
--half-100Mbps(4),
--full-100Mbps(5),
--half-1Gigabps(6),
--full-1Gigabps(7)
auto(1),
full-10Mbps-8023x(2),
full-10Mbps-none(3),
half-10Mbps-backp(4),
half-10Mbps-none(5),
full-100Mbps-8023x(6),
full-100Mbps-none(7),
half-100Mbps-backp(8),
half-100Mbps-none(9),
full-1Gigabps-8023x(10),
full-1Gigabps-none(11),
half-1Gigabps-backp(12),
half-1Gigabps-none(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port speed and duplex mode."
::= { swL2PortInfoEntry 5 }
-- *******************************************************
swL2PortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains control information about every port."
::= { swL2PortMgmt 2 }
swL2PortCtrlEntry OBJECT-TYPE
SYNTAX SwL2PortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of control information for each port of the device."
INDEX { swL2PortCtrlPortIndex }
::= { swL2PortCtrlTable 1 }
SwL2PortCtrlEntry ::=
SEQUENCE {
swL2PortCtrlPortIndex
INTEGER,
swL2PortCtrlAdminState
INTEGER,
swL2PortCtrlNwayState
INTEGER,
swL2PortCtrlFlowCtrlState
INTEGER,
swL2PortCtrlDescription
DisplayString,
-- swL2PortCtrlAddressLearning
-- INTEGER,
swL2PortCtrlMACNotifyState
INTEGER,
--swL2PortCtrlCleanStatCounter
-- INTEGER
swL2PortCtrlMDIXState
INTEGER
}
swL2PortCtrlPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2PortCtrlEntry 1 }
swL2PortCtrlAdminState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decide the port enabled or disabled."
::= { swL2PortCtrlEntry 2 }
swL2PortCtrlNwayState OBJECT-TYPE
SYNTAX INTEGER {
-- other(1),
-- nway-enabled(2),
-- nway-disabled-10Mbps-Half(3),
-- nway-disabled-10Mbps-Full(4),
-- nway-disabled-100Mbps-Half(5),
-- nway-disabled-100Mbps-Full(6),
-- nway-disabled-1Gigabps-Half(7),
-- nway-disabled-1Gigabps-Full(8)
nway-auto(1),
nway-disabled-10Mbps-Half(2),
nway-disabled-10Mbps-Full(3),
nway-disabled-100Mbps-Half(4),
nway-disabled-100Mbps-Full(5),
-- nway-disabled-1Gigabps-Half(6),
nway-disabled-1Gigabps-Full(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chose the port speed, duplex mode, and N-Way function mode."
::= { swL2PortCtrlEntry 3 }
swL2PortCtrlFlowCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set flow control function as enabled or disabled."
::= { swL2PortCtrlEntry 4 }
swL2PortCtrlDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object describe the ports in text."
::= { swL2PortCtrlEntry 5 }
-- swL2PortCtrlAddressLearning OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This object decide the addresslearning enabled or disabled."
-- ::= { swL2PortCtrlEntry 6 }
swL2PortCtrlMACNotifyState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object set each poet MAC notification state."
::= { swL2PortCtrlEntry 7 }
-- swL2PortCtrlCleanStatCounter OBJECT-TYPE
-- SYNTAX INTEGER {
-- normal(1),
-- active(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "As the object is set to active, the statistic counters of this port will be
-- cleared. If set to normal, do nothing."
-- ::= { swL2PortCtrlEntry 5 }
swL2PortCtrlMDIXState OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
normal(2),
cross(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the MDIX state of a specified port."
::= { swL2PortCtrlEntry 10 }
swL2PortErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about Err port."
::= { swL2PortMgmt 3 }
swL2PortErrEntry OBJECT-TYPE
SYNTAX SwL2PortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for err port of the device."
INDEX { swL2PortErrPortIndex }
::= { swL2PortErrTable 1 }
SwL2PortErrEntry ::=
SEQUENCE {
swL2PortErrPortIndex
INTEGER,
swL2PortErrPortState
INTEGER,
swL2PortErrPortStatus
INTEGER,
swL2PortErrPortReason
INTEGER,
swL2PortErrDescription
DisplayString
}
swL2PortErrPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { swL2PortErrEntry 1 }
swL2PortErrPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decide the portstate enabled or disabled."
::= { swL2PortErrEntry 2 }
swL2PortErrPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
err-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decide the PortStatus whether err-disabled."
::= { swL2PortErrEntry 3 }
swL2PortErrPortReason OBJECT-TYPE
SYNTAX INTEGER {
stp-lbd(1),
storm-control(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decide the PortStatus STP LBD or Storm control."
::= { swL2PortErrEntry 4 }
swL2PortErrDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object describe the ports in text."
::= { swL2PortErrEntry 5 }
-- ********************************************************************
-- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
-- ********************************************************************
swL2QOSBandwidthControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 1 }
swL2QOSBandwidthControlEntry OBJECT-TYPE
SYNTAX SwL2QOSBandwidthControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2QOSBandwidthControlTable."
INDEX { swL2QOSBandwidthPortIndex }
::= { swL2QOSBandwidthControlTable 1 }
SwL2QOSBandwidthControlEntry ::=
SEQUENCE {
swL2QOSBandwidthPortIndex
INTEGER,
swL2QOSBandwidthRxRate
INTEGER,
swL2QOSBandwidthTxRate
INTEGER,
swL2QOSBandwidthRadiusRxRate
INTEGER,
swL2QOSBandwidthRadiusTxRate
INTEGER
}
swL2QOSBandwidthPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..650)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port ."
::= { swL2QOSBandwidthControlEntry 1 }
swL2QOSBandwidthRxRate OBJECT-TYPE
SYNTAX INTEGER (64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates RX Rate(Kbit/sec) of the specifed port.Value 1024000 means no limit."
::= { swL2QOSBandwidthControlEntry 2 }
swL2QOSBandwidthTxRate OBJECT-TYPE
SYNTAX INTEGER (64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates TX Rate(Kbit/sec) of the specifed port.Value 1024000 means no limit. "
::= { swL2QOSBandwidthControlEntry 3 }
swL2QOSBandwidthRadiusRxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RxRate value comes from RADIUS server,
If an 802.1X port is authenticated, this value
will overwrites the locally configured RxRate. "
::= { swL2QOSBandwidthControlEntry 4 }
swL2QOSBandwidthRadiusTxRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TxRate value comes from RADIUS server,
If an 802.1X port is authenticated, this value
will overwrites the locally configured TxRate. "
::= { swL2QOSBandwidthControlEntry 5 }
-- *******************************************************
swL2QOSSchedulingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 2 }
swL2QOSSchedulingEntry OBJECT-TYPE
SYNTAX SwL2QOSSchedulingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2QOSSchedulingTable."
INDEX { swL2QOSSchedulingClassIndex }
::= { swL2QOSSchedulingTable 1 }
SwL2QOSSchedulingEntry ::=
SEQUENCE {
swL2QOSSchedulingClassIndex
INTEGER,
-- swL2QOSSchedulingMaxPkts
-- INTEGER,
-- swL2QOSSchedulingMaxLatency
-- INTEGER,
swL2QOSSchedulingMaxWeight
INTEGER
}
swL2QOSSchedulingClassIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the hardware queue number."
::= { swL2QOSSchedulingEntry 1 }
-- swL2QOSSchedulingMaxPkts OBJECT-TYPE
-- SYNTAX INTEGER (0..255)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicates the maximum number of packets the hardware priority queue will be allowed
-- to transmit before allowing the next lowest priority queue to transmit its packets.
-- a value between 0 and 255 can be specified."
-- ::= { swL2QOSSchedulingEntry 2 }
--
-- swL2QOSSchedulingMaxLatency OBJECT-TYPE
-- SYNTAX INTEGER (0..255)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicates the maximum amount of time the hardware priority queue will be allowed
-- to transmit packets before allowing the next lowest priority queue to begin transmit
-- its packets. A value between 0 and 255 can be specified- with this value multiplied
-- by 16 ms to arrive at the total allowed time for queue to transmit packets.
-- For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting
-- the last packet until it is finished when the max_latency timer expires. "
-- ::= { swL2QOSSchedulingEntry 3 }
swL2QOSSchedulingMaxWeight OBJECT-TYPE
SYNTAX INTEGER (1..55)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { swL2QOSSchedulingEntry 4 }
swL2QOSSchedulingMechanismCtrl OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
-- roundrobin(2),
weightfair(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can control QOS scheduling Mechanism."
::= { swL2QOSMgmt 5 }
-- *******************************************************
swL2QOS8021pUserPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 3 }
swL2QOS8021pUserPriorityEntry OBJECT-TYPE
SYNTAX SwL2QOS8021pUserPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2QOS8021pUserPriorityTable."
INDEX { swL2QOS8021pUserPriorityIndex }
::= { swL2QOS8021pUserPriorityTable 1 }
SwL2QOS8021pUserPriorityEntry ::=
SEQUENCE {
swL2QOS8021pUserPriorityIndex
INTEGER,
swL2QOS8021pUserPriorityClass
INTEGER
}
swL2QOS8021pUserPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p user priority ."
::= { swL2QOS8021pUserPriorityEntry 1 }
swL2QOS8021pUserPriorityClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has four hardware
priority queues available. They are numbered between 0 (the lowest priority)
and 3 (the highest priority)."
::= { swL2QOS8021pUserPriorityEntry 2 }
-- ******************************************************
swL2QOS8021pDefaultPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"."
::= { swL2QOSMgmt 4 }
swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE
SYNTAX SwL2QOS8021pDefaultPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2QOS8021pDefaultPriorityTable."
INDEX { swL2QOS8021pDefaultPriorityIndex }
::= { swL2QOS8021pDefaultPriorityTable 1 }
SwL2QOS8021pDefaultPriorityEntry ::=
SEQUENCE {
swL2QOS8021pDefaultPriorityIndex
INTEGER,
swL2QOS8021pDefaultPriority
INTEGER,
swL2QOS8021pRadiusPriority
INTEGER
}
swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (1..650)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port number ."
::= { swL2QOS8021pDefaultPriorityEntry 1 }
swL2QOS8021pDefaultPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value to assign to untagged packets received by the
switch ports on the switch.."
::= { swL2QOS8021pDefaultPriorityEntry 2 }
swL2QOS8021pRadiusPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of 802.1p comes from RADIUS server.
If an 802.1X port is authenticated, this value
will overwrite the local configured value."
::= { swL2QOS8021pDefaultPriorityEntry 3 }
-- swL2QOSDscpMappingTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2QOSDscpMappingEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSMgmt 6 }
--
-- swL2QOSDscpMappingEntry OBJECT-TYPE
-- SYNTAX SwL2QOSDscpMappingEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- INDEX { swL2QOSDscpIndex }
-- ::= { swL2QOSDscpMappingTable 1 }
--
-- SwL2QOSDscpMappingEntry ::=
-- SEQUENCE {
-- swL2QOSDscpIndex
-- INTEGER,
-- swL2QOSDscpClass
-- INTEGER
-- }
--
-- swL2QOSDscpIndex OBJECT-TYPE
-- SYNTAX INTEGER (0..63)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSDscpMappingEntry 1 }
--
--swL2QOSDscpClass OBJECT-TYPE
-- SYNTAX INTEGER (0..3)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSDscpMappingEntry 2 }
--
--swL2QOSPortDscpTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2QOSPortDscpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSMgmt 7 }
--
--swL2QOSPortDscpEntry OBJECT-TYPE
-- SYNTAX SwL2QOSPortDscpEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- INDEX { swL2QOSPortDscpIndex }
-- ::= { swL2QOSPortDscpTable 1 }
--
--SwL2QOSPortDscpEntry ::=
-- SEQUENCE {
-- swL2QOSPortDscpIndex
-- INTEGER,
-- swL2QOSPortDscpStatus
-- INTEGER
-- }
--
--swL2QOSPortDscpIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..10)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSPortDscpEntry 1 }
--
--swL2QOSPortDscpStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disable(2),
-- enable(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swL2QOSPortDscpEntry 2 }
--
--
-- ************************************************************************
-- swPortTrunkTable
-- ************************************************************************
swPortTrunkMaxEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max entries of swPortTrunkTable"
::= { swL2TrunkMgmt 1}
swPortTrunkMaxPortMembers OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max number of ports allowed in a trunk."
::= { swL2TrunkMgmt 2}
swPortTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwPortTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the port membership for each logical link."
::= { swL2TrunkMgmt 3 }
swPortTrunkEntry OBJECT-TYPE
SYNTAX SwPortTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specifies which ports group form
a single logical link."
INDEX { swPortTrunkIndex }
::= { swPortTrunkTable 1 }
SwPortTrunkEntry ::=
SEQUENCE {
swPortTrunkIndex
Integer32,
swPortTrunkMasterPort
Integer32,
swPortTrunkPortList
PortList,
swPortTrunkType
INTEGER,
swPortTrunkActivePort
PortList,
swPortTrunkState
RowStatus,
swPortTrunkFloodingPort
Integer32
}
swPortTrunkIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of logical port trunk."
::= { swPortTrunkEntry 1 }
swPortTrunkMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the master port number of the port trunk entry.The
first port of the trunk is implicitly configured to be the master logical
port.When using Port Trunk, you can not configure the other ports of
the group except the master port. Their configuration must be same as the
master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)."
::= { swPortTrunkEntry 2 }
swPortTrunkPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate member ports of a logical trunk."
::= { swPortTrunkEntry 3 }
--add
swPortTrunkType OBJECT-TYPE
SYNTAX INTEGER{
static(1),
lacp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of this entry. "
::= { swPortTrunkEntry 4 }
swPortTrunkActivePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the active ports of this entry. "
::= { swPortTrunkEntry 5 }
swPortTrunkState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
when the state is CreatAndGo(4),the type of trunk is static(1);
when the state is CreatAndWait(5),the type of trunk is lacp(2).
"
::= { swPortTrunkEntry 6 }
swPortTrunkFloodingPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flooding port of every trunk."
::= { swPortTrunkEntry 7 }
swL2TrunkAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
other(1),
mac-source(2),
mac-destination(3),
mac-source-dest(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures to part of the packet examined by the
switch when selecting the egress port for transmitting
load-sharing data."
::= { swL2TrunkMgmt 4 }
swL2TrunkLACPPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifys which ports group a set of ports(up to 8)
into a single logical link."
::= { swL2TrunkMgmt 5 }
swL2TrunkLACPPortEntry OBJECT-TYPE
SYNTAX SwL2TrunkLACPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specifies which ports group a set of
ports(up to 8) into a single logical link."
INDEX { swL2TrunkLACPPortIndex }
::= { swL2TrunkLACPPortTable 1 }
SwL2TrunkLACPPortEntry ::=
SEQUENCE {
swL2TrunkLACPPortIndex
INTEGER,
swL2TrunkLACPPortState
INTEGER
}
swL2TrunkLACPPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of logical port lacp. "
::= { swL2TrunkLACPPortEntry 1 }
swL2TrunkLACPPortState OBJECT-TYPE
SYNTAX INTEGER{
active(1),
passive(2)
-- stacking-port(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of logical port lacp."
::= { swL2TrunkLACPPortEntry 2 }
swL2TrunkVLANTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrunkVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the VLAN trunking feature of the device."
::= { swL2TrunkMgmt 6 }
swL2TrunkVLANEntry OBJECT-TYPE
SYNTAX SwL2TrunkVLANEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is used to configure the VLAN trunking settings for each port."
INDEX { swL2TrunkVLANPort }
::= { swL2TrunkVLANTable 1 }
SwL2TrunkVLANEntry ::=
SEQUENCE {
swL2TrunkVLANPort
INTEGER,
swL2TrunkVLANState
INTEGER
}
swL2TrunkVLANPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port being configured."
::= { swL2TrunkVLANEntry 1 }
swL2TrunkVLANState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the logical port LACP."
::= { swL2TrunkVLANEntry 2 }
-- **************************************************************************
-- swPortMirrorPackage
-- **************************************************************************
-- swPortMirrorMaxEntries OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The max entries of this swPortMirrorCtrlTable"
-- ::= { swPortMirrorPackage 1}
-- swPortMirrorCtrlTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortMirrorCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of port snooping entries.Port mirroring function provides an easy
-- way to monitor traffic on any port. In this way any good packets appears
-- on the source mirror port also shows up on the target mirror port and
-- doesn't to reconstruct the LAN."
-- ::= { swPortMirrorPackage 2 }
-- swPortMirrorCtrlEntry OBJECT-TYPE
-- SYNTAX SwPortMirrorCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information provide an easy way to monitor traffic on any port.
-- The use can bring a fancy network monitor attaching to any target mirror
-- port and set the port to be monitored as source mirror port. "
-- INDEX { swPortMirrorIndex }
-- ::= { swPortMirrorCtrlTable 1 }
-- SwPortMirrorCtrlEntry ::=
-- SEQUENCE {
-- swPortMirrorIndex
-- Integer32,
-- swPortMirrorSourcePort
-- Integer32,
-- swPortMirrorRxPortList
-- PortList,
-- swPortMirrorTxPortList
-- PortList,
-- swPortMirrorTargetPort
-- Integer32,
-- swPortMirrorDirection
-- INTEGER,
-- swPortMirrorState
-- RowStatus
-- }
-- swPortMirrorIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the port snooping entry number.There is just only
-- one now."
-- ::= { swPortMirrorCtrlEntry 1 }
swPortMirrorRxPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Rx port list of ports to be sniffed."
::= { swPortMirrorPackage 2 }
swPortMirrorTxPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Tx port list of ports to be sniffed."
::= { swPortMirrorPackage 3 }
swPortMirrorTargetPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates switch which port will sniff another port.
A trunk port member cannot be configured as a target Snooping port.
The port number is the sequential (logical) number which is also
applied to bridge MIB, etc. "
::= { swPortMirrorPackage 4 }
-- swPortMirrorDirection OBJECT-TYPE
-- SYNTAX INTEGER {
--gavin for eds2626 2003 28th May
-- other(1),
-- ingress(2),
-- egress(3),
-- both(4)
-- }
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "This object uses to setup the what packets will be mirrored."
-- ::= { swPortMirrorCtrlEntry 4}
swPortMirrorState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry. "
::= { swPortMirrorPackage 5 }
-- ********************************************************************
-- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
-- ********************************************************************
swL2IGMPMaxSupportedVlans OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of Vlans in the layer 2 IGMP control table
(swL2IGMPCtrlTable)."
::= { swIGMPPackage 1 }
swL2IGMPMaxIpGroupNumPerVlan OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of multicast ip group per Vlan in the layer 2
IGMP information table (swL2IGMPQueryInfoTable)."
::= { swIGMPPackage 2 }
-- swL2IGMPLastQueryIPAddr OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the ip address of last send IGMP query
-- packet."
-- ::= { swL2IGMPMgmt 3 }
swL2IGMPCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table controls the Vlan's IGMP function. Its scale depends
on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled
mode, there is only one entry in the table, with index 1. If
VLAN is in Port-Base or 802.1q mode, the number of entries can
be up to 12, with index range from 1 to 12."
::= { swIGMPPackage 3 }
swL2IGMPCtrlEntry OBJECT-TYPE
SYNTAX SwL2IGMPCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled."
INDEX { swL2IGMPCtrlVid }
::= { swL2IGMPCtrlTable 1 }
SwL2IGMPCtrlEntry ::=
SEQUENCE {
-- swL2IGMPCtrlIndex
-- INTEGER,
swL2IGMPCtrlVid
INTEGER,
swL2IGMPQueryInterval
INTEGER,
swL2IGMPMaxResponseTime
INTEGER,
swL2IGMPRobustness
INTEGER,
swL2IGMPLastMemberQueryInterval
INTEGER,
swL2IGMPHostTimeout
INTEGER,
swL2IGMPRouteTimeout
INTEGER,
swL2IGMPLeaveTimer
INTEGER,
swL2IGMPQueryState
INTEGER,
swL2IGMPCurrentState
INTEGER,
swL2IGMPCtrlState
INTEGER,
swL2IGMPFastLeave
INTEGER
}
-- swL2IGMPCtrlIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IGMP control entry number.Its scale
-- depends on current VLAN state (swL2VlanInfoStatus). If VLAN is
-- disabled, there is only one entry in the table, with index 1.
-- If VLAN is in Port-Base or 802.1q mode, the number of entries
-- is 12, with index range from 1 to 12."
-- ::= { swL2IGMPCtrlEntry 1 }
swL2IGMPCtrlVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the IGMP control entry's VLAN id. If VLAN
is disabled, the Vid is always 0 and cannot be changed by
management users. If VLAN is in Port-Base mode, the Vid is
arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode,
the Vid setting can vary from 1 to 4094 by management user, and
the Vid in each entry must be unique in the IGMP Control Table."
::= { swL2IGMPCtrlEntry 1 }
swL2IGMPQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which IGMP Host-Query packets are
transmitted on this switch."
DEFVAL { 125 }
::= { swL2IGMPCtrlEntry 2 }
swL2IGMPMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time on this switch."
DEFVAL { 10 }
::= { swL2IGMPCtrlEntry 3 }
swL2IGMPRobustness OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses."
DEFVAL { 2 }
::= { swL2IGMPCtrlEntry 4 }
swL2IGMPLastMemberQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages."
DEFVAL { 1 }
::= { swL2IGMPCtrlEntry 5 }
swL2IGMPHostTimeout OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timer value for sending IGMP query packet when none was
sent by the host in the LAN. The timer works in per-VLAN basis.
Our device will be activated to send the query message if the
timer is expired. Please reference RFC2236-1997."
DEFVAL { 260 }
::= { swL2IGMPCtrlEntry 6 }
swL2IGMPRouteTimeout OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages."
DEFVAL { 260 }
::= { swL2IGMPCtrlEntry 7 }
swL2IGMPLeaveTimer OBJECT-TYPE
SYNTAX INTEGER (1..16711450)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left."
DEFVAL { 1 }
::= { swL2IGMPCtrlEntry 8 }
swL2IGMPQueryState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object decide the IGMP query enabled or disabled."
::= { swL2IGMPCtrlEntry 9 }
swL2IGMPCurrentState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
querier(2),
non-querier(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current IGMP query state."
::= { swL2IGMPCtrlEntry 10 }
swL2IGMPCtrlState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable(2) - IGMP funtion is disabled for this entry.
enable(3) - IGMP funtion is enabled for this entry."
::= { swL2IGMPCtrlEntry 11 }
swL2IGMPFastLeave OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" "
::= { swL2IGMPCtrlEntry 12 }
swL2IGMPQueryInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPQueryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the number current IGMP query packets which
is captured by this device, as well as the IGMP query packets
sent by the device."
::= { swIGMPPackage 4 }
swL2IGMPQueryInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPQueryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled."
INDEX { swL2IGMPInfoVid }
::= { swL2IGMPQueryInfoTable 1 }
SwL2IGMPQueryInfoEntry ::=
SEQUENCE {
-- swL2IGMPInfoIndex
-- INTEGER,
swL2IGMPInfoVid
INTEGER,
swL2IGMPInfoQueryCount
INTEGER,
swL2IGMPInfoTxQueryCount
INTEGER
}
-- swL2IGMPInfoIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..12)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the IGMP query information entry
-- number. It could be up to 12 entries, depending on current
-- number of VLAN entries."
-- ::= { swL2IGMPQueryInfoEntry 1 }
swL2IGMPInfoVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Vid of associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of
IGMP control table (swL2IGMPCtrlTable)."
::= { swL2IGMPQueryInfoEntry 1 }
swL2IGMPInfoQueryCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of query packets received
since the IGMP function enabled, in per-VLAN basis."
::= { swL2IGMPQueryInfoEntry 2 }
swL2IGMPInfoTxQueryCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the send count of IGMP query messages, in
per-VLAN basis. In case of IGMP timer expiration, the switch
sends IGMP query packets to related VLAN member ports and
increment this object by 1."
::= { swL2IGMPQueryInfoEntry 3 }
swL2IGMPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing current IGMP information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled. Note
that the priority of IGMP table entries is lower than Filtering
Table, i.e. if there is a table hash collision between the
entries of IGMP Table and Filtering Table inside the switch H/W
address table, then Filtering Table entry overwrite the
colliding entry of IGMP Table. See swL2FilterMgmt description
also."
::= { swIGMPPackage 5 }
swL2IGMPInfoEntry OBJECT-TYPE
SYNTAX SwL2IGMPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about current IGMP information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled."
INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr }
::= { swL2IGMPInfoTable 1 }
SwL2IGMPInfoEntry ::=
SEQUENCE {
swL2IGMPVid
INTEGER,
swL2IGMPGroupIpAddr
IpAddress,
swL2IGMPMacAddr
MacAddress,
swL2IGMPPortMap
PortList,
swL2IGMPIpGroupReportCount
INTEGER
}
swL2IGMPVid OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Vid of individual IGMP table entry.
It shows the Vid of IGMP report information captured on
network."
::= { swL2IGMPInfoEntry 1 }
swL2IGMPGroupIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is identify group ip address which is captured from
IGMP packet, in per-Vlan basis."
::= { swL2IGMPInfoEntry 2 }
swL2IGMPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is identify mac address which is corresponding
to swL2IGMPGroupIpAddr, in per-Vlan basis."
::= { swL2IGMPInfoEntry 3 }
swL2IGMPPortMap OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates which ports are belong to the same
multicast group, in per-Vlan basis. Each multicast group has a
octect string to indicate with port map. The most significant
bit represents the lowest numbered port, and the least
significant bit represents the highest numbered port. Thus, each
port of the switch is represented by a single bit within the
value of this object. If that bit has a value of '1' then that
port is included in the set of ports; the port is not included
if its bit has a value of '0'(Note that the setting of the bit
corresponding to the port from which a frame is received is
irrelevant). The 4 octets is represent one unit port according
its logic port. If the unit less 32 port, the other port don't
care just fill zero."
::= { swL2IGMPInfoEntry 4 }
swL2IGMPIpGroupReportCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicate how much report packet was receive by our
device corresponding with this entry from IGMP function enabled,
in per-Vlan basis."
::= { swL2IGMPInfoEntry 5 }
--------------------------------------------------
-- IGMP Router Port Table
--------------------------------------------------
swL2IGMPRouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information of the router port table."
::= { swIGMPPackage 6 }
swL2IGMPRouterPortEntry OBJECT-TYPE
SYNTAX SwL2IGMPRouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of swL2IGMPRouterPortTable."
INDEX { swL2IGMPRouterPortVlanid }
::= { swL2IGMPRouterPortTable 1 }
SwL2IGMPRouterPortEntry ::=
SEQUENCE {
swL2IGMPRouterPortVlanid
INTEGER,
swL2IGMPRouterPortVlanName
DisplayString,
swL2IGMPRouterPortStaticPortList
PortList,
swL2IGMPRouterPortDynamicPortList
PortList,
swL2IGMPRouterPortForbiddenPortList
PortList
}
swL2IGMPRouterPortVlanid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the vlan id of the router port entry."
::= { swL2IGMPRouterPortEntry 1 }
swL2IGMPRouterPortVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the vlan name of the router port entry."
::= { swL2IGMPRouterPortEntry 2 }
swL2IGMPRouterPortStaticPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicate the static portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 3 }
swL2IGMPRouterPortDynamicPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicate the dynamic portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 4 }
swL2IGMPRouterPortForbiddenPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicate the forbidden portlist of the router port entry."
::= { swL2IGMPRouterPortEntry 5 }
-- -----------------------------------------------------------------------------
-- swL2IGMPAccessAuthTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 7 }
-- -----------------------------------------------------------------------------
swL2IGMPAccessAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2IGMPAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the IGMP Access Authentication
configurations of the device."
::= { swIGMPPackage 7 }
swL2IGMPAccessAuthEntry OBJECT-TYPE
SYNTAX SwL2IGMPAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of manageable entities for IGMP Access Authentication.
The configuration is done per port."
INDEX { swL2IGMPAccessAuthPort }
::= { swL2IGMPAccessAuthTable 1 }
SwL2IGMPAccessAuthEntry ::=
SEQUENCE {
swL2IGMPAccessAuthPort
INTEGER,
swL2IGMPAccessAuthState
INTEGER
}
swL2IGMPAccessAuthPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured."
::= { swL2IGMPAccessAuthEntry 1 }
swL2IGMPAccessAuthState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the status of IGMP Access Authentication of the port."
::= { swL2IGMPAccessAuthEntry 2 }
-- ************************************************************************
-- swPortRateTable
-- ************************************************************************
-- swPortRateTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortRateEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table specifies the port membership for each logical link."
-- ::= { swPortRatePackage 1 }
--
--
-- swPortRateEntry OBJECT-TYPE
-- SYNTAX SwPortRateEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information specifies which ports group form
-- a single logical link."
-- INDEX { swPortRateIndex }
-- ::= { swPortRateTable 1 }
--
-- SwPortRateEntry ::=
-- SEQUENCE {
-- swPortRateIndex
-- Integer32,
-- swPortRateIngressRate
-- Integer32,
-- swPortRateEgressRate
-- Integer32
-- }
--
-- swPortRateIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The index of swPortRateTable"
-- ::= { swPortRateEntry 1 }
--
-- swPortRateIngressRate OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "RX Rate"
-- ::= { swPortRateEntry 2 }
--
-- swPortRateEgressRate OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "TX Rate"
-- ::= { swPortRateEntry 3 }
-- ************************************************************************
-- swPortBindingPackage
-- ************************************************************************
-- swPortBindingStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable the Port Binding"
-- ::= { swPortBindingPackage 1 }
--
-- swPortBindingCtrlTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortBindingCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBindingPackage 2 }
--
--
-- swPortBindingCtrlEntry OBJECT-TYPE
-- SYNTAX SwPortBindingCtrlEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information."
-- INDEX { swPortBindingCtrlIndex }
-- ::= { swPortBindingCtrlTable 1 }
--
-- SwPortBindingCtrlEntry ::=
-- SEQUENCE {
-- swPortBindingCtrlIndex
-- Integer32,
-- swPortBindingCtrlStatus
-- INTEGER
-- }
--
-- swPortBindingCtrlIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBindingCtrlEntry 1 }
--
-- swPortBindingCtrlStatus OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable the Port Binding Control"
-- ::= { swPortBindingCtrlEntry 2 }
--
-- The PortBinding Information Table
--
-- swPortBindingInfoMaxEntries OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The max entries of this swPortBindingInfoTable"
-- ::= { swPortBindingPackage 3}
--
-- swPortBindingInfoTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortBindingInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The table contains the number current PortBinding packets which
-- is captured by this device, as well as the PortBinding packets
-- sent by the device."
-- ::= { swPortBindingPackage 4 }
--
-- swPortBindingInfoEntry OBJECT-TYPE
-- SYNTAX SwPortBindingInfoEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- ""
-- INDEX {swPortBindingPortNum, swPortBindingInfoIndex }
-- ::= { swPortBindingInfoTable 1 }
--
-- SwPortBindingInfoEntry ::=
-- SEQUENCE {
-- swPortBindingPortNum
-- Integer32,
-- swPortBindingInfoIndex
-- Integer32,
-- swPortBindingInfoMacAddr
-- MacAddress,
-- swPortBindingInfoStatus
-- RowStatus
-- }
--
-- swPortBindingPortNum OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBindingInfoEntry 1 }
--
-- swPortBindingInfoIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBindingInfoEntry 2 }
--
-- swPortBindingInfoMacAddr OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "This object is to identify the mac address "
-- ::= { swPortBindingInfoEntry 3 }
--
-- swPortBindingInfoStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Enable the Port Binding Info"
-- ::= { swPortBindingInfoEntry 4}
-- ******************************************************************************
-- swPortBaseVlanMgmt OBJECT IDENTIFIER ::= { swDlinkL2Mgmt 6 }
-- ******************************************************************************
-- swPortBaseVlanTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPortBaseVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table specifies the port membership for each logical link."
-- ::= { swPortBaseVlanMgmt 1 }
--
-- swPortBaseVlanEntry OBJECT-TYPE
-- SYNTAX SwPortBaseVlanEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information specifies which ports group form
-- a single logical link."
-- INDEX { swPortBaseVlanIndex }
-- ::= { swPortBaseVlanTable 1 }
--
-- SwPortBaseVlanEntry ::=
-- SEQUENCE {
-- swPortBaseVlanIndex
-- INTEGER,
-- swPortBaseVlanName
-- DisplayString,
-- swPortBaseVlanPortList
-- PortList,
-- swPortBaseVlanCtrlStatus
-- RowStatus
-- }
--
-- swPortBaseVlanIndex OBJECT-TYPE
-- SYNTAX INTEGER
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBaseVlanEntry 1}
--
-- swPortBaseVlanName OBJECT-TYPE
-- SYNTAX DisplayString
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- ""
-- ::= { swPortBaseVlanEntry 2 }
--
-- swPortBaseVlanPortList OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Indicate member ports of Port Base Vlan."
-- ::= { swPortBaseVlanEntry 3 }
--
-- swPortBaseVlanCtrlStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Enable the Port Base Vlan Info"
-- ::= { swPortBaseVlanEntry 4}
-- swVlanModeSwitch OBJECT-TYPE
-- SYNTAX INTEGER {
-- qvlan(1),
-- portvlan(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The network management protocol(s) supported by this agent."
-- ::= { swPortBaseVlanMgmt 2 }
-- swPriToTrafficTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwPriToTrafficEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table specifies the map relationshio from priority to traffic class."
-- ::= { swPriToTrafficMgmt 1 }
-- swPriToTrafficEntry OBJECT-TYPE
-- SYNTAX SwPriToTrafficEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information specifies the map relationshio from priority to traffic class."
-- INDEX { swPriority }
-- ::= { swPriToTrafficTable 1 }
-- SwPriToTrafficEntry ::=
-- SEQUENCE {
-- swPriority
-- INTEGER,
-- swTrafficClassMapTo
-- INTEGER
-- }
-- swPriority OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "the priority from 0 to 7"
-- ::= { swPriToTrafficEntry 1 }
-- swTrafficClassMapTo OBJECT-TYPE
-- SYNTAX INTEGER (0..1)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "the traffic class of each priority should map to"
-- ::= { swPriToTrafficEntry 2 }
--new
-- ********************************************************************
-- dot3adAggrPortMgmt OBJECT IDENTIFIER ::= { lagMIBObjects 1 }
-- ********************************************************************
-- dot3adAggPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF Dot3adAggPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table that contains Link Aggregation Control
-- configuration information about every
-- Aggregation Port associated with this device.
-- A row appears in this table for each physical port."
-- REFERENCE
-- "IEEE 802.3 Section 30.7.2"
-- ::= { dot3adAggrPortMgmt 1 }
--
-- dot3adAggPortEntry OBJECT-TYPE
-- SYNTAX Dot3adAggPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of Link Aggregation Control configuration
-- parameters for each Aggregation Port on this device."
-- INDEX { dot3adAggPortIndex }
-- ::= { dot3adAggPortTable 1 }
-- Dot3adAggPortEntry ::=
-- SEQUENCE {
-- dot3adAggPortIndex
-- INTEGER,
-- dot3adAggPortMode
-- INTEGER
-- }
--
-- dot3adAggPortIndex OBJECT-TYPE
-- SYNTAX INTEGER(0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The ifIndex of the port"
-- REFERENCE
-- "IEEE 802.3 Section 30.7.2.1.1"
-- ::= { dot3adAggPortEntry 1 }
-- dot3adAggPortMode OBJECT-TYPE
-- SYNTAX INTEGER{
-- other(1),
-- active(2),
-- passive(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " The aggregrate mode of the port"
-- ::= { dot3adAggPortEntry 2 }
--
-- ****************
-- add by ynot 2004-1-6
-- ********
-- loadPortSeg OBJECT-TYPE
-- SYNTAX INTEGER{
-- other(1),
-- load(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "After loading port segmentation,the switch must reboot."
-- ::= { loadPortSegmentation 1 }
-- ********************************************************************
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 }
-- ********************************************************************
swL2TrafficCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifys the storm traffic control configuration."
::= { swL2TrafficMgmt 1 }
swL2TrafficCtrlEntry OBJECT-TYPE
SYNTAX SwL2TrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specifies the storm traffic control
configuration."
INDEX { swL2TrafficCtrlGroupIndex }
::= { swL2TrafficCtrlTable 1 }
SwL2TrafficCtrlEntry ::=
SEQUENCE {
swL2TrafficCtrlGroupIndex
INTEGER,
swL2TrafficCtrlUnitIndex
INTEGER,
swL2TrafficCtrlBMStromthreshold
INTEGER,
swL2TrafficCtrlBcastStromCtrl
INTEGER,
swL2TrafficCtrlMcastStromCtrl
INTEGER,
swL2TrafficCtrlUcastStromCtrl
INTEGER
}
swL2TrafficCtrlGroupIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of logical port trunk. The trunk group number depend
on the existence of unit and module."
::= { swL2TrafficCtrlEntry 1 }
swL2TrafficCtrlUnitIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates ID of the unit in the device"
::= { swL2TrafficCtrlEntry 2 }
swL2TrafficCtrlBMStromthreshold OBJECT-TYPE
SYNTAX INTEGER (64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object to decide how much thousand packets per second
broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl,
swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlUcastStromCtrl
objects whether is enabled) will active storm control. Whenever
a port reaches its configured amount of packets in the one
second time interval, the device will start dropping that type
of packet, until the time interval has expired. Once the time
interval has expired, the device will start forwarding that type
of packet."
::= { swL2TrafficCtrlEntry 3 }
swL2TrafficCtrlBcastStromCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates broadcast storm control function is
enabled or disabled."
::= { swL2TrafficCtrlEntry 4 }
swL2TrafficCtrlMcastStromCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates multicast storm control function is
enabled or disabled."
::= { swL2TrafficCtrlEntry 5 }
swL2TrafficCtrlUcastStromCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates destination lookup fail function is
enabled or disabled."
::= { swL2TrafficCtrlEntry 6 }
-- ********************************************************************
-- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
-- ********************************************************************
swL2TrafficSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifys the port just can forward traffic to the
specific port list."
::= { swL2TrafficSegMgmt 1 }
swL2TrafficSegEntry OBJECT-TYPE
SYNTAX SwL2TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information specifies the port with its traffic
forward list."
INDEX { swL2TrafficSegPort }
::= { swL2TrafficSegTable 1 }
SwL2TrafficSegEntry ::=
SEQUENCE {
swL2TrafficSegPort
INTEGER,
swL2TrafficSegForwardPorts
PortList
}
swL2TrafficSegPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the logical port."
::= { swL2TrafficSegEntry 1 }
swL2TrafficSegForwardPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port list that the specific port can forward traffic."
::= { swL2TrafficSegEntry 2 }
-- ********************************************************************
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
-- ********************************************************************
swL2PortSecurityControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port security feature which controls the address leaning capability and the
traffic forwarding decision. Each port can have this function enabled or disabled.
When it is enabled and a number is given said N, which allows N addresses to be
learned at this port, the first N learned addresses are locked at this port as
static entry. When the learned addresses number reach N, any coming packet with
not learned source addresses are discarded (e.g. dropped) and no more new addresses
can be learned at this port."
::= { swL2PortSecurityMgmt 1 }
swL2PortSecurityControlEntry OBJECT-TYPE
SYNTAX SwL2PortSecurityControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2PortSecurityControlTable."
INDEX { swL2PortSecurityPortIndex }
::= { swL2PortSecurityControlTable 1 }
SwL2PortSecurityControlEntry ::=
SEQUENCE {
swL2PortSecurityPortIndex
INTEGER,
swL2PortSecurityMaxLernAddr
INTEGER,
swL2PortSecurityMode
INTEGER,
swL2PortSecurityAdmState
INTEGER
}
swL2PortSecurityPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the secured port to lock address learning."
::= { swL2PortSecurityControlEntry 1 }
swL2PortSecurityMaxLernAddr OBJECT-TYPE
SYNTAX INTEGER (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates allowable number of addresses to be learned at this port."
::= { swL2PortSecurityControlEntry 2 }
swL2PortSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
other(1),
permanent(2),
deleteOnTimeout(3),
deleteOnReset(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of locking address.
In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer
expire. In this mode, when the locked address is aged
out, the number of address can be learned has to be
increased by one.
In deleteOnReset(4) mode - never age out the locked addresses unless restart
the system to prevent from port movement or intrusion."
::= { swL2PortSecurityControlEntry 3 }
swL2PortSecurityAdmState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates administration state of locking address."
::= { swL2PortSecurityControlEntry 4 }
-- ********************************************************************
swL2PortSecurityTrapLogState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enable(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"when enable(2),whenever there's a new MAC that violates the pre-defined
port security configuration, trap will be sent out and the relevant information
will be logged in system."
::= { swL2PortSecurityMgmt 2 }
-- ********************************************************************
-- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 }
-- ********************************************************************
-- swMSTPGblCtrl OBJECT IDENTIFIER ::= { swL2StpMgmt 1 }
--
-- swL2STPStpForwardBPDU OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used to forward BPDU to
-- non stp port."
-- ::= { swMSTPGblCtrl 1 }
--
-- swL2STPStpLBD OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used to Loop-back prevention."
-- ::= { swMSTPGblCtrl 2 }
--
--
-- swL2STPPortCtrl OBJECT IDENTIFIER ::= { swL2StpMgmt 2 }
-- swL2STPPortTable OBJECT-TYPE
-- swL2STPPortTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SwL2STPPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table that contains port-specific information
-- for the Spanning Tree Protocol."
-- ::= { swL2STPPortCtrl 4 }
--
-- swL2STPPortEntry OBJECT-TYPE
-- SYNTAX SwL2STPPortEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A list of information maintained by every port
-- about the Spanning Tree Protocol state for that
-- port."
-- INDEX { swL2STPPort }
-- ::= { swL2STPPortTable 1 }
--
-- SwL2STPPortEntry ::= SEQUENCE {
-- swL2STPPort
-- INTEGER,
-- swL2STPPortLBD
-- INTEGER,
-- swL2STPPortState
-- INTEGER
-- }
--
-- swL2STPPort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The port number of the port for this entry."
-- ::= { swL2STPPortEntry 1}
--
-- swL2STPPortLBD OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used to Loop-back prevention attached
-- to this port."
-- ::= { swL2STPPortEntry 2 }
--
-- swL2STPPortState OBJECT-TYPE
-- SYNTAX INTEGER {
-- other(1),
-- disabled(2),
-- enabled(3)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The enabled/disabled status is used to Loop-back prevention attached
-- to this port."
-- ::= { swL2STPPortEntry 3 }
swL2StpForwardBPDU OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether flooding BPDU packets when STP is disabled on device"
::= { swL2StpMgmt 1 }
swL2StpLbd OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Indicates whether STP loop-back prevent on the device is turned on"
::= { swL2StpMgmt 2 }
swL2StpLbdRecoverTime OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The period of time on which STP module keeps checking the BPDU loop status,
to configure swL2StpLbdRecoverTime as 0 disables automatically recover"
::= { swL2StpMgmt 3 }
swL2StpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains port-specific information
for the Spanning Tree Protocol."
::= { swL2StpMgmt 4 }
swL2StpPortEntry OBJECT-TYPE
SYNTAX SwL2StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that
port."
INDEX { swL2StpPort }
::= { swL2StpPortTable 1 }
SwL2StpPortEntry ::= SEQUENCE {
swL2StpPort
INTEGER,
swL2StpPortLbd
INTEGER,
swL2StpPortStatus
INTEGER,
swL2StpPortRole
INTEGER,
swL2StpPortFBPDU
INTEGER,
swL2StpPortLinkState
INTEGER,
swL2StpPortProtocolMigration
TruthValue,
swL2StpPortAdminEdgePort
INTEGER,
swL2StpPortOperEdgePort
TruthValue,
swL2StpPortAdminPointToPoint
INTEGER,
swL2StpPortOperPointToPoint
TruthValue,
swL2StpPortAdminPathCost
Unsigned32,
swL2StpPortPriority
INTEGER,
swL2STPPortState
INTEGER,
swL2StpPortRestrictedRole
TruthValue,
swL2StpPortRestrictedTCN
TruthValue
}
swL2StpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for this entry."
::= { swL2StpPortEntry 1}
swL2StpPortLbd OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The enabled/disabled status is used to Loop-back prevention attached
to this port."
::= { swL2StpPortEntry 2 }
swL2StpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
discarding(3),
learning(4),
forwarding(5),
broken(6),
no-stp-enabled(7),
err-disabled(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the port Enable state is enabled, the port's current
state as defined by application of the Spanning Tree Protocol.
If the PortEnable is disabled, the the port status will be
no-stp-enabled(7).
If the port is in error disabled status, the port status will be err-disabled(8)"
::= { swL2StpPortEntry 3 }
swL2StpPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
nonStp(6),
loopback(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the port Enable state is enabled, the port's current
port role as defined by application of the Spanning Tree Protocol.
If the Port Enable state is disabled, the the port role will be
nonstp(7). If the port is in loop-back status, the port role will
be loopback(8)"
::= { swL2StpPortEntry 4 }
swL2StpPortFBPDU OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled/disabled status is used to BPDU Filtering attached
to this port."
::= { swL2StpPortEntry 5 }
swL2StpPortLinkState OBJECT-TYPE
SYNTAX INTEGER {
link-down(1),
half-10Mbps-none(2),
half-10Mbps-backp(3),
full-10Mbps-none(4),
full-10Mbps-8023x(5),
half-100Mbps-none(6),
half-100Mbps-backp(7),
full-100Mbps-none(8),
full-100Mbps-8023x(9),
half-1000Mbps-none(10),
full-1000Mbps-backp(11),
full-1000Mbps-none(12),
full-1000Mbps-8023x(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the stp port speed and duplex mode."
::= { swL2StpPortEntry 6 }
swL2StpPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in RSTP (version 2) mode, writing TRUE(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns FALSE(2) when read."
REFERENCE
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
::= { swL2StpPortEntry 7 }
swL2StpPortAdminEdgePort OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative value of the Edge Port parameter. A
value of TRUE(0) indicates that this port should be
assumed as an edge-port and a value of FALSE(1) indicates
that this port should be assumed as a non-edge-port."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.3"
::= { swL2StpPortEntry 8 }
swL2StpPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the Edge Port parameter. The
object is initialized to the value of
swL2StpPortAdminEdgePort and is set FALSE on reception of
a BPDU."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { swL2StpPortEntry 9 }
swL2StpPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { swL2StpPortEntry 10 }
swL2StpPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the swL2StpPortAdminPointToPoint object."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { swL2StpPortEntry 11}
swL2StpPortAdminPathCost OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) --INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.
This complements the object swL2StpPortPathCost, which
returns the operational value of the path cost.
Issue No.: 3250R2-077
As USE_RSTP is 1:enabled, swL2StpPortPathCost is forced to be read-only.
configuration via swL2StpPortAdminPathCost.
According 802.1w, value range of swL2StpPortAdminPathCost would be expanded.
the former value range is (0..65535), the new is (0..200000000). "
REFERENCE
"IEEE 802.1D-1998: Section 8.5.5.3"
::= { swL2StpPortEntry 12}
swL2StpPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
swL2StpPort."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.1"
::= { swL2StpPortEntry 13 }
swL2STPPortState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enabled/disabled status is usedoop-back prevention attached
to this port."
::= { swL2StpPortEntry 14 }
swL2StpPortRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If TRUE causes the port not to be selected as Root Port,
even it has the best spanning tree priotiry vector."
::= { swL2StpPortEntry 15 }
swL2StpPortRestrictedTCN OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If TRUE causes the port not to propagate received topology
change notifications and topology changes to other Ports."
::= { swL2StpPortEntry 16 }
-- ********************************************************************
-- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 }
-- ********************************************************************
swL2CosPriorityCtrl OBJECT IDENTIFIER ::= { swL2CosMgmt 3 }
swL2CosPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show and config per port priority-based QoS features on the switch"
::= { swL2CosPriorityCtrl 1 }
swL2CosPriorityEntry OBJECT-TYPE
SYNTAX SwL2CosPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2CosPriorityTable."
INDEX { swL2CosPriorityPort }
::= { swL2CosPriorityTable 1 }
SwL2CosPriorityEntry ::=
SEQUENCE {
swL2CosPriorityPort
INTEGER,
swL2CosPriorityPortPRI
INTEGER,
swL2CosPriorityEtherPRI
INTEGER,
swL2CosPriorityIpPRI
INTEGER,
swL2CosPriorityNone
INTEGER
}
swL2CosPriorityPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of CoS Priority."
::= { swL2CosPriorityEntry 1 }
swL2CosPriorityPortPRI OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates port_priority state for CoS."
::= { swL2CosPriorityEntry 2 }
swL2CosPriorityEtherPRI OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
ether8021p(2),
macBase(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Ethernet frame based priority.
When set ether8021p(2), enable 802.1p QoS; When set macBase(3), enable MAC-based QoS;
When set disable(1), disable Ethernet frame based priority."
::= { swL2CosPriorityEntry 3 }
swL2CosPriorityIpPRI OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
tos(2),
dscp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable IP priority QoS.
When set tos(2), enable TOS based QoS; When set dscp(3), enable DSCP based QoS;
When set disable(1), disable IP priority QoS."
::= { swL2CosPriorityEntry 4 }
swL2CosPriorityNone OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"when read,it always return invalid(2);
when write valid(1),it disables all priority in this table."
::= { swL2CosPriorityEntry 5 }
swL2CosPortPRITable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosPortPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show port-to-class mappings and
map specific port to one of the hardware queues available on the switch."
::= { swL2CosPriorityCtrl 2 }
swL2CosPortPRIEntry OBJECT-TYPE
SYNTAX SwL2CosPortPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2CosPortPRITable."
INDEX { swL2CosPortPRIIndex }
::= { swL2CosPortPRITable 1 }
SwL2CosPortPRIEntry ::=
SEQUENCE {
swL2CosPortPRIIndex
INTEGER,
swL2CosPortPRIClass
INTEGER
}
swL2CosPortPRIIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates CoS Priority PortPRI."
::= { swL2CosPortPRIEntry 1 }
swL2CosPortPRIClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set, You must have administrator privileges.
And you can set value only 0 or 3,you can't set value 1 or 2."
::= { swL2CosPortPRIEntry 2 }
swL2CosMacBasePRITable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosMacBasePRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show MAC priority map to traffic class and
map the destination MAC address in incoming packet to one of the hardware queues available on the switch."
::= { swL2CosPriorityCtrl 3 }
swL2CosMacBasePRIEntry OBJECT-TYPE
SYNTAX SwL2CosMacBasePRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2CosMacBasePRITable."
INDEX { swL2CosMacBasePRIIndex }
::= { swL2CosMacBasePRITable 1 }
SwL2CosMacBasePRIEntry ::=
SEQUENCE {
swL2CosMacBasePRIIndex
MacAddress,
swL2CosMacBasePRIClass
INTEGER
}
swL2CosMacBasePRIIndex OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates CoS Priority MacBasePRI."
::= { swL2CosMacBasePRIEntry 1 }
swL2CosMacBasePRIClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set, You must have administrator privileges."
::= { swL2CosMacBasePRIEntry 2 }
swL2CosTosPRITable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosTosPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show TOS value to traffic class mapping and
map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch."
::= { swL2CosPriorityCtrl 4 }
swL2CosTosPRIEntry OBJECT-TYPE
SYNTAX SwL2CosTosPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2CosTosPRITable."
INDEX { swL2CosTosPRIIndex }
::= { swL2CosTosPRITable 1 }
SwL2CosTosPRIEntry ::=
SEQUENCE {
swL2CosTosPRIIndex
INTEGER,
swL2CosTosPRIClass
INTEGER
}
swL2CosTosPRIIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates CoS Priority TosPRI."
::= { swL2CosTosPRIEntry 1 }
swL2CosTosPRIClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set, You must have administrator privileges."
::= { swL2CosTosPRIEntry 2 }
swL2CosDscpPRITable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2CosDscpPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used to show DSCP value to traffic class mapping and
map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch."
::= { swL2CosPriorityCtrl 5 }
swL2CosDscpPRIEntry OBJECT-TYPE
SYNTAX SwL2CosDscpPRIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information contained in swL2CosDscpPRITable."
INDEX { swL2CosDscpPRIIndex }
::= { swL2CosDscpPRITable 1 }
SwL2CosDscpPRIEntry ::=
SEQUENCE {
swL2CosDscpPRIIndex
INTEGER,
swL2CosDscpPRIClass
INTEGER
}
swL2CosDscpPRIIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates CoS Priority DscpPRI."
::= { swL2CosDscpPRIEntry 1 }
swL2CosDscpPRIClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set, You must have administrator privileges."
::= { swL2CosDscpPRIEntry 2 }
-- ********************************************************************
-- swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 }
-- ********************************************************************
swL2LoopDetectCtrl OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 1 }
swL2LoopDetectAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection status for the system."
::= { swL2LoopDetectCtrl 1 }
swL2LoopDetectInterval OBJECT-TYPE
SYNTAX INTEGER (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interval value, the range is from 1 to 32767 seconds."
::= { swL2LoopDetectCtrl 2 }
swL2LoopDetectRecoverTime OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the recover time, the range is from 60 to 1000000.
The value of 0 disables the recover function."
::= { swL2LoopDetectCtrl 3 }
--***************************************************************************
swL2LoopDetectPortMgmt OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 2 }
swL2LoopDetectPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2LoopDetectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table specifies the loopback detection function specified by port."
::= { swL2LoopDetectPortMgmt 1 }
swL2LoopDetectPortEntry OBJECT-TYPE
SYNTAX SwL2LoopDetectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table specifies the loopback detection function specified by port."
INDEX { swL2LoopDetectPortIndex }
::= { swL2LoopDetectPortTable 1 }
SwL2LoopDetectPortEntry ::=
SEQUENCE {
swL2LoopDetectPortIndex
INTEGER,
swL2LoopDetectPortState
INTEGER,
swL2LoopDetectPortLoopStatus
INTEGER
}
swL2LoopDetectPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module"
::= { swL2LoopDetectPortEntry 1 }
swL2LoopDetectPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the loopback detection function state on the port."
::= { swL2LoopDetectPortEntry 2 }
swL2LoopDetectPortLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
loop(2),
error(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port status."
::= { swL2LoopDetectPortEntry 4 }
-- ********************************************************************
-- swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 19 }
-- ********************************************************************
swL2VlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwL2VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { swL2VLANMgmt 1 }
swL2VlanEntry OBJECT-TYPE
SYNTAX SwL2VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured into the
device by (local or network) management."
INDEX { swL2VlanIndex }
::= { swL2VlanTable 1 }
SwL2VlanEntry ::=
SEQUENCE {
swL2VlanIndex
VlanId,
swL2VlanName
DisplayString,
swL2VlanType
INTEGER,
swL2VlanMemberPorts
PortList,
swL2VlanStaticPorts
PortList,
swL2VlanUntaggedPorts
PortList,
swL2VlanTaggedPorts
PortList
}
swL2VlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the VLAN to be created. The range is 1 - 4094."
::= { swL2VlanEntry 1 }
swL2VlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the VLAN to be displayed."
::= { swL2VlanEntry 2 }
swL2VlanType OBJECT-TYPE
SYNTAX INTEGER
{
dynamic(0),
static(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the VLAN to be displayed."
::= { swL2VlanEntry 3 }
swL2VlanMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A range of member ports to the VLAN."
::= { swL2VlanEntry 4 }
swL2VlanStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A range of static ports to the VLAN."
::= { swL2VlanEntry 5 }
swL2VlanUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the additional ports as untagged."
::= { swL2VlanEntry 6 }
swL2VlanTaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the additional ports as tagged."
::= { swL2VlanEntry 7 }
-- ***************************************************************************
-- Layer 2 Trap
-- ***************************************************************************
swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 }
-- swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 }
swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 }
swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
-- ***************************************************************************
-- swL2NotifyMgmt
-- ***************************************************************************
-- swL2macNotificationSeverity OBJECT-TYPE
-- SYNTAX AgentNotifyLevel
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicate the level of macNotification detection."
-- ::= { swL2NotifyMgmt 1 }
--
-- swL2PortSecurityViolationSeverity OBJECT-TYPE
-- SYNTAX AgentNotifyLevel
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Indicate the level of PortSecurityViolation detection."
-- ::= { swL2NotifyMgmt 2 }
-- ***************************************************************************
-- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
-- ***************************************************************************
swL2macNotification NOTIFICATION-TYPE
OBJECTS {
swL2macNotifyInfo
}
STATUS current
DESCRIPTION
" This trap indicates the MAC addresses variation in address table . "
::= { swL2NotifFirmware 1 }
swL2PortSecurityViolationTrap NOTIFICATION-TYPE
OBJECTS {
swL2PortSecurityPortIndex,
swL2PortSecurityViolationMac
}
STATUS current
DESCRIPTION
"When the port_security trap is enabled, new MAC addresses that violate
the pre-defined port security configuration will trigger trap messages
to be sent out."
::= { swL2NotifFirmware 2 }
-- ***************************************************************************
-- notificationBidings
-- ***************************************************************************
swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 }
swL2macNotifyInfo OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last time reboot information."
::= { swl2NotificationBidings 1 }
swL2PortSecurityViolationMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the MAC address that violates the port security configuration."
::= { swl2NotificationBidings 2 }
END
View Git Blame Copy Permalink