1248 lines
38 KiB
Plaintext
1248 lines
38 KiB
Plaintext
-- DES-2218 SWITCH HUB MIB V0.03 08/15/97
|
|
|
|
DES2218-MIB
|
|
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, IpAddress,
|
|
TimeTicks,Counter
|
|
FROM RFC1155-SMI
|
|
DisplayString, PhysAddress
|
|
FROM RFC1213-MIB
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
-- OwnerString ::= DisplayString
|
|
-- This data type is used to model an administratively
|
|
-- assigned name of the owner of a resource. This
|
|
-- information is taken from the NVT ASCII character set.
|
|
-- It is suggested that this name contain one or more
|
|
-- of the following:
|
|
-- IP address, management station name, network manager's
|
|
-- name, location, or phone number.
|
|
-- SIZE (0..xx)
|
|
|
|
|
|
dlink OBJECT IDENTIFIER ::= { enterprises 171 }
|
|
dlink-products OBJECT IDENTIFIER ::= { dlink 10 }
|
|
dlink-Des2218Prod OBJECT IDENTIFIER ::= { dlink-products 7 }
|
|
dlink-Des2218ProdId OBJECT IDENTIFIER ::= { dlink-Des2218Prod 1 }
|
|
des2218SwHub OBJECT IDENTIFIER ::= { dlink-Des2218Prod 2 }
|
|
|
|
|
|
dlink-mgmt OBJECT IDENTIFIER ::= { dlink 11 }
|
|
|
|
agentConfigInfo OBJECT IDENTIFIER ::= { dlink-mgmt 1 }
|
|
des2218series OBJECT IDENTIFIER ::= { dlink-mgmt 7 }
|
|
|
|
-- agentBasicInfo
|
|
|
|
agentBasicInfo OBJECT IDENTIFIER ::= { agentConfigInfo 1 }
|
|
|
|
agentRuntimeSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a textual description of the runtime software version
|
|
and revision. If the version number is one and revision number is
|
|
zero agentRuntimeSwVersion would be 'Ver. 1.0'"
|
|
::= { agentBasicInfo 1 }
|
|
|
|
agentPromFwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a textual description of the agent PROM firmware version
|
|
and revision. If the version number is one and revision number is
|
|
zero agentPromFwVersion would be 'Ver. 1.0'"
|
|
::= { agentBasicInfo 2 }
|
|
|
|
agentHwRevision OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a textual description of the hardware revision.
|
|
The display string should look like 'Rev. A1'"
|
|
::= { agentBasicInfo 3 }
|
|
|
|
agentMgmtProtocolCapability OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
snmp-ip(2),
|
|
snmp-ipx(3),
|
|
snmp-ip-ipx(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The network management protocol(s) supported by this agent."
|
|
::= { agentBasicInfo 4 }
|
|
|
|
-- agentMibcapabilityTable
|
|
|
|
agentMibCapabilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentMibCapabilityEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of MIB capability entries supported by this agent."
|
|
::= { agentBasicInfo 5 }
|
|
|
|
agentMibCapabilityEntry OBJECT-TYPE
|
|
SYNTAX AgentMibCapabilityEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A MIB capability entry contains objects describing a particular MIB
|
|
supported by this agent."
|
|
INDEX { agentMibCapabilityIndex }
|
|
::= { agentMibCapabilityTable 1 }
|
|
|
|
AgentMibCapabilityEntry ::= SEQUENCE {
|
|
agentMibCapabilityIndex
|
|
INTEGER,
|
|
agentMibCapabilityDescr
|
|
DisplayString,
|
|
agentMibCapabilityVersion
|
|
INTEGER,
|
|
agentMibCapabilityType
|
|
INTEGER
|
|
}
|
|
|
|
agentMibCapabilityIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of agentMibCapabilityDescr entries."
|
|
::= { agentMibCapabilityEntry 1 }
|
|
|
|
agentMibCapabilityDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of the MIB supported by the agent."
|
|
|
|
::= { agentMibCapabilityEntry 2 }
|
|
|
|
agentMibCapabilityVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version of the MIB specified in this entry."
|
|
::= { agentMibCapabilityEntry 3 }
|
|
|
|
agentMibCapabilityType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
standard(2),
|
|
proprietary(3),
|
|
experiment(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of the MIB specified in this entry."
|
|
::= { agentMibCapabilityEntry 4 }
|
|
|
|
-- agentMgmtRole OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- primary-master(2),
|
|
-- backup-master(3)
|
|
-- }
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "The role of this agent within this particular hub stack"
|
|
-- ::= { agentBasicInfo 6 }
|
|
|
|
|
|
-- agentBasicConfig
|
|
|
|
agentBasicConfig OBJECT IDENTIFIER ::= { agentConfigInfo 2 }
|
|
|
|
agentSwUpdateMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
network-load(2),
|
|
out-of-band-load(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS
|
|
mandatory
|
|
DESCRIPTION
|
|
"The download media used by the system to download the
|
|
runtime software."
|
|
::= { agentBasicConfig 1 }
|
|
|
|
agentSwUpdateCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current status of software download control. The setting
|
|
is effective the next time you reset or power on the hub."
|
|
::= { agentBasicConfig 2 }
|
|
|
|
agentBootFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of the file to be downloaded from the TFTP server when
|
|
software update is enabled."
|
|
::= { agentBasicConfig 3 }
|
|
|
|
agentSystemReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2),
|
|
no-reset(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the agent system reset state.
|
|
Setting this object to no-reset(3) has no effect.
|
|
Setting this object to reset(2) will reset the agent.
|
|
The agent always returns no-reset(3) when this object is read."
|
|
::= { agentBasicConfig 4 }
|
|
|
|
agentRs232PortConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
console(2),
|
|
out-of-band(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current setting of RS-232C port.
|
|
The RS-232C port can be configured as the console port or
|
|
used for out-of-band connection."
|
|
::= { agentBasicConfig 5 }
|
|
|
|
agentOutOfBandBaudRateConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
baudRate-2400 (2),
|
|
baudRate-9600 (3),
|
|
baudRate-19200(4),
|
|
baudRate-38400(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The baud rate setting for out of band connection.
|
|
The baud rate for the console interface is always 9600."
|
|
::= { agentBasicConfig 6 }
|
|
|
|
agentOutOfBandDialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The dial out phone number for out of band to establish
|
|
a connection. This entry is used for reference only."
|
|
::= { agentBasicConfig 7 }
|
|
|
|
|
|
|
|
-- agentIpProtocolConfig
|
|
|
|
agentIpProtoConfig OBJECT IDENTIFIER ::= { agentConfigInfo 3 }
|
|
|
|
agentIpNumOfIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of IP interfaces supported by this agent."
|
|
::= { agentIpProtoConfig 1 }
|
|
|
|
agentIpIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentIpIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of IP interface entries supported by the agent."
|
|
::= { agentIpProtoConfig 2 }
|
|
|
|
agentIpIfEntry OBJECT-TYPE
|
|
SYNTAX AgentIpIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An agentIPIfEntry contains information about a particular
|
|
IP interface."
|
|
INDEX { agentIpIfIndex }
|
|
::= { agentIpIfTable 1 }
|
|
|
|
AgentIpIfEntry ::= SEQUENCE {
|
|
agentIpIfIndex
|
|
INTEGER,
|
|
agentIpIfAddress
|
|
IpAddress,
|
|
agentIpIfNetMask
|
|
IpAddress,
|
|
agentIpIfDefaultRouter
|
|
IpAddress,
|
|
agentIpIfMacAddr
|
|
PhysAddress,
|
|
agentIpIfType
|
|
INTEGER
|
|
}
|
|
|
|
agentIpIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object uniquely identifies the IP interface number
|
|
in agentIpIfTable.
|
|
This value should never greater than agentIpNumOfIf"
|
|
::= { agentIpIfEntry 1 }
|
|
|
|
agentIpIfAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of the interface."
|
|
::= { agentIpIfEntry 2 }
|
|
|
|
agentIpIfNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP net mask for this interface."
|
|
::= { agentIpIfEntry 3 }
|
|
|
|
agentIpIfDefaultRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The default gateway for this IP interface."
|
|
::= { agentIpIfEntry 4 }
|
|
|
|
agentIpIfMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address of this IP interface.
|
|
For interfaces which do not have such an address
|
|
(e.g., a serial line), this object should contain
|
|
an octet string of zero length."
|
|
::= { agentIpIfEntry 5 }
|
|
|
|
agentIpIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
ethernet-csmacd(6),
|
|
slip(28) -- generic SLIP
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The physical layer interface of the IP interface."
|
|
::= { agentIpIfEntry 6 }
|
|
|
|
agentIpBootServerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address of Boot Server."
|
|
::= { agentIpProtoConfig 3 }
|
|
|
|
agentIpBootProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
bootp-tftp(2),
|
|
tftp(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The software download protocol used for software update."
|
|
::= { agentIpProtoConfig 4 }
|
|
|
|
agentIpGetIpFromBootpServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates whether the agent get its system IP address
|
|
from BootP server at start up."
|
|
::= { agentIpProtoConfig 5 }
|
|
|
|
agentIpUnauthAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of an unauthorized SNMP packet."
|
|
::= { agentIpProtoConfig 6 }
|
|
|
|
agentIpUnauthComm OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The community string of an unauthorized SNMP packet."
|
|
::= { agentIpProtoConfig 7 }
|
|
|
|
agentIpLastBootServerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The last IP address used as Boot server IP address."
|
|
::= { agentIpProtoConfig 8 }
|
|
|
|
agentIpLastIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The last IP address used as the agent system IP address."
|
|
::= { agentIpProtoConfig 9 }
|
|
|
|
-- agentIptrapMangerTable
|
|
|
|
agentIpTrapManagerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentIpTrapManagerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of trap manager entries to which to send SNMP traps ."
|
|
::= { agentIpProtoConfig 10 }
|
|
|
|
agentIpTrapManagerEntry OBJECT-TYPE
|
|
SYNTAX AgentIpTrapManagerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This entry contains the particular trap manager settings."
|
|
INDEX { agentIpTrapManagerIpAddr }
|
|
::= { agentIpTrapManagerTable 1 }
|
|
|
|
AgentIpTrapManagerEntry ::= SEQUENCE {
|
|
agentIpTrapManagerIpAddr
|
|
IpAddress,
|
|
agentIpTrapManagerComm
|
|
DisplayString,
|
|
agentIpTrapManagerStatus
|
|
INTEGER
|
|
}
|
|
|
|
agentIpTrapManagerIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address to receive SNMP traps from this device."
|
|
::= { agentIpTrapManagerEntry 1 }
|
|
|
|
agentIpTrapManagerComm OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The community string of the SNMP trap packet sent to
|
|
the trap manager."
|
|
::= { agentIpTrapManagerEntry 2 }
|
|
|
|
agentIpTrapManagerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates whether or not the trap should be send to this
|
|
trap manager."
|
|
::= { agentIpTrapManagerEntry 3 }
|
|
|
|
|
|
|
|
des2218MIB OBJECT IDENTIFIER ::= { des2218series 1 }
|
|
swDevicePackage OBJECT IDENTIFIER ::= { des2218MIB 1 }
|
|
swPortPackage OBJECT IDENTIFIER ::= { des2218MIB 2 }
|
|
|
|
swDeviceInfo OBJECT IDENTIFIER ::= { swDevicePackage 1 }
|
|
|
|
swDevInfoTotalNumOfPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ports within this switch hub. This value
|
|
is the sum of the ports of each group within this
|
|
switch hub."
|
|
::= { swDeviceInfo 1 }
|
|
|
|
swDevInfoNumOfPortOnUse OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ports in this switch hub connected to the
|
|
segment or end stations."
|
|
::= { swDeviceInfo 2 }
|
|
|
|
-- swDevInfoSerialNum OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "The serial number of this switch hub."
|
|
-- ::= { swDeviceInfo 3 }
|
|
|
|
swDevInfoDesc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual description of this switch hub."
|
|
::= { swDeviceInfo 3 }
|
|
|
|
-- swDevInfoRepeaterType OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- baseband-10-Mb(2),
|
|
-- baseband-100-Mb-class-I(3),
|
|
-- baseband-100-Mb-class-II(4)
|
|
-- }
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "This objects indicates the CSMA/CD repeater type. The type
|
|
-- value matches the clause number of the standard that specifies
|
|
-- the particular repeater, with further numerical identification
|
|
-- for the repeater classes within the same clause."
|
|
-- ::= { swDeviceInfo 5 }
|
|
|
|
swDevInfoPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
portType-UTP(2),
|
|
portType-AUI(3),
|
|
portType-Fiber(4),
|
|
portType-BNC(5),
|
|
portType-Option-module-RAS(6),
|
|
portType-Option-module-100Bridge(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The connector type of this port."
|
|
::= { swDeviceInfo 4 }
|
|
|
|
swDevInfoHwRev OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..12))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual description of the hardware revision of
|
|
this switch bub."
|
|
::= { swDeviceInfo 5 }
|
|
|
|
swDevInfoSystemUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time the switch
|
|
entered its current operational state. If the
|
|
current state was entered prior to the last re-
|
|
initialization, then this object contains a zero
|
|
value."
|
|
::= { swDeviceInfo 6 }
|
|
|
|
swDevInfoFrontPanelLedStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current status of front panel LED."
|
|
::= { swDeviceInfo 7 }
|
|
|
|
-- swDevInfoMdiSwitch OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- mdi(2),
|
|
-- mdi-x(3)
|
|
-- }
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "The current setting of the MDI switch."
|
|
-- ::= { swDeviceInfo 9 }
|
|
|
|
swDevInfoDramSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DRAM size of the switch hub"
|
|
::= { swDeviceInfo 8 }
|
|
|
|
swDeviceCtl OBJECT IDENTIFIER ::= { swDevicePackage 2 }
|
|
|
|
swDevCtrlDisableLearningState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This Object indicate the switch hub wether or not learn any
|
|
new addresses from the Ethernet ports."
|
|
::= { swDeviceCtl 1 }
|
|
|
|
swDevCtrlReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2),
|
|
no-reset(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the switch hub reset state.
|
|
Setting this object to no-reset(3) has no effect.
|
|
Setting this object to reset(2) will reset the agent.
|
|
The agent always returns no-reset(3) when this object is read."
|
|
::= { swDeviceCtl 2 }
|
|
|
|
swDevCtrlSpanningTree OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This Object control the device to enable/disable spanning
|
|
tree algorithm in the system initilization or reset."
|
|
::= { swDeviceCtl 3 }
|
|
|
|
swPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwPortInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of port information entries."
|
|
::= { swPortPackage 1 }
|
|
|
|
swPortInfoEntry OBJECT-TYPE
|
|
SYNTAX SwPortInfoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This entry contains the port information, like porttype,
|
|
linkstatus..."
|
|
INDEX { swPortInfoGroupIndex,swPortInfoIndex }
|
|
::= { swPortInfoTable 1 }
|
|
|
|
SwPortInfoEntry ::= SEQUENCE {
|
|
swPortInfoGroupIndex
|
|
INTEGER,
|
|
swPortInfoIndex
|
|
INTEGER,
|
|
swPortInfoType
|
|
INTEGER,
|
|
swPortInfoPartitionStatus
|
|
INTEGER,
|
|
swPortInfoLinkStatus
|
|
INTEGER,
|
|
swPortInfoDuplexMode
|
|
INTEGER,
|
|
swPortInfoNegotiationStatus
|
|
INTEGER,
|
|
swPortInfoSpeedStatus
|
|
INTEGER
|
|
}
|
|
|
|
swPortInfoGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the port within the group for
|
|
which this entry contains infomation."
|
|
::= { swPortInfoEntry 1 }
|
|
|
|
swPortInfoIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicate switch hub port number."
|
|
::= { swPortInfoEntry 2 }
|
|
|
|
swPortInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
portType-UTP(2),
|
|
portType-AUI(3),
|
|
portType-Fiber(4),
|
|
portType-BNC(5),
|
|
portType-Option-module-RAS(6),
|
|
portType-Option-module-100Bridge(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The connector type of this port."
|
|
::= { swPortInfoEntry 3 }
|
|
|
|
swPortInfoPartitionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
no-partion(2),
|
|
partion(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This Object indicate the port partition status."
|
|
::= { swPortInfoEntry 4 }
|
|
|
|
swPortInfoLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
link-pass(2),
|
|
link-fail(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This Object indicate the port link test status."
|
|
::= { swPortInfoEntry 5 }
|
|
|
|
swPortInfoDuplexMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
half(2),
|
|
full(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This Object indicate the port work in which duplex mode."
|
|
::= { swPortInfoEntry 6 }
|
|
|
|
swPortInfoNegotiationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This Object indicate the port work in auto negotiation
|
|
enabled or disabled."
|
|
::= { swPortInfoEntry 7 }
|
|
|
|
swPortInfoSpeedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
speed-10M(2),
|
|
speed-100M(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This Object indicate the port trasmit rate is in 10M bps
|
|
or 100M bps ."
|
|
::= { swPortInfoEntry 8 }
|
|
|
|
swPortCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwPortCtrlEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of port state control entries."
|
|
::= { swPortPackage 2 }
|
|
|
|
swPortCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwPortCtrlEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This entry control the port state, like filter broadcast,
|
|
linkstatus..."
|
|
INDEX { swPortCtrlGroupIndex,swPortCtrlIndex }
|
|
::= { swPortCtrlTable 1 }
|
|
|
|
SwPortCtrlEntry ::= SEQUENCE {
|
|
swPortCtrlGroupIndex
|
|
INTEGER,
|
|
swPortCtrlIndex
|
|
INTEGER,
|
|
swPortCtrlAdminState
|
|
INTEGER,
|
|
swPortCtrlDuplexState
|
|
INTEGER,
|
|
swPortCtrlLinkStatusAlarmState
|
|
INTEGER,
|
|
swPortCtrlFilterBcastState
|
|
INTEGER,
|
|
swPortCtrlForwardUnknowState
|
|
INTEGER,
|
|
swPortCtrlPartitionStatus
|
|
INTEGER,
|
|
swPortCtrlNegotiationStatus
|
|
INTEGER,
|
|
swPortCtrlSpeedStatus
|
|
INTEGER
|
|
}
|
|
|
|
swPortCtrlGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the port within the group for
|
|
which this entry contains infomation."
|
|
::= { swPortCtrlEntry 1 }
|
|
|
|
swPortCtrlIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicate switch hub port number."
|
|
::= { swPortCtrlEntry 2 }
|
|
|
|
swPortCtrlAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port control administration state."
|
|
::= { swPortCtrlEntry 3 }
|
|
|
|
swPortCtrlDuplexState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
half(2),
|
|
full(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicating the port work in half/full duplex mode."
|
|
::= { swPortCtrlEntry 4 }
|
|
|
|
swPortCtrlLinkStatusAlarmState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Depending on this object to determine wether send a trap or
|
|
not when link status change ."
|
|
::= { swPortCtrlEntry 5 }
|
|
|
|
swPortCtrlFilterBcastState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
forward(2),
|
|
discard(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port control filter broadcast to all port or discard."
|
|
::= { swPortCtrlEntry 6 }
|
|
|
|
swPortCtrlForwardUnknowState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port control forward unknow packet state."
|
|
::= { swPortCtrlEntry 7 }
|
|
|
|
swPortCtrlPartitionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Depending on this object determine to send a trap or not when
|
|
the port was partition."
|
|
::= { swPortCtrlEntry 8 }
|
|
|
|
swPortCtrlNegotiationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Depending on this object determine to enable NWAY or disable."
|
|
::= { swPortCtrlEntry 9 }
|
|
|
|
swPortCtrlSpeedStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
speed-10M(2),
|
|
speed-100M(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Depending on this object to determining this port transmit
|
|
rate is 10M bps or 100M bps."
|
|
::= { swPortCtrlEntry 10}
|
|
|
|
swPortCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwPortCounterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of port MIB statistic Counter entries."
|
|
::= { swPortPackage 3 }
|
|
|
|
swPortCounterEntry OBJECT-TYPE
|
|
SYNTAX SwPortCounterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This entry include all the port Counter which support by
|
|
DES3208, like Bytes received, Bytes Sent ..."
|
|
INDEX { swPortCounterGroupIndex,swPortCounterIndex }
|
|
::= { swPortCounterTable 1 }
|
|
|
|
SwPortCounterEntry ::= SEQUENCE {
|
|
swPortCounterGroupIndex
|
|
INTEGER,
|
|
swPortCounterIndex
|
|
INTEGER,
|
|
swPortBytesReceived
|
|
Counter,
|
|
swPortBytesSent
|
|
Counter,
|
|
swPortFramesReceived
|
|
Counter,
|
|
swPortFramesSent
|
|
Counter,
|
|
swPortTotalBytesReceived
|
|
Counter,
|
|
swPortTotalFramesReceived
|
|
Counter,
|
|
swPortBroadcastFramesReceived
|
|
Counter,
|
|
swPortMulticastFramesReceived
|
|
Counter,
|
|
swPortCRCError
|
|
Counter,
|
|
swPortOversizeFrames
|
|
Counter,
|
|
swPortFragments
|
|
Counter,
|
|
swPortJabber
|
|
Counter,
|
|
swPortCollision
|
|
Counter,
|
|
swPortLateCollision
|
|
Counter,
|
|
swPortFrames64Bytes
|
|
Counter,
|
|
swPortFrames65To127Bytes
|
|
Counter,
|
|
swPortFrames128To255Bytes
|
|
Counter,
|
|
swPortFrames256To511Bytes
|
|
Counter,
|
|
swPortFrames512To1023Bytes
|
|
Counter,
|
|
swPortFrames1024To1522Bytes
|
|
Counter,
|
|
swPortMACRxError
|
|
Counter
|
|
}
|
|
|
|
swPortCounterGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the port within the group for
|
|
which this entry contains infomation."
|
|
::= { swPortCounterEntry 1 }
|
|
|
|
swPortCounterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicate switch hub port number."
|
|
::= { swPortCounterEntry 2 }
|
|
|
|
swPortBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good bytes received. Local and dropped packets
|
|
increment the counter as well."
|
|
::= { swPortCounterEntry 3 }
|
|
|
|
swPortBytesSent OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good bytes sent."
|
|
::= { swPortCounterEntry 4 }
|
|
|
|
swPortFramesReceived OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good frames received. Local and dropped packets
|
|
increment the counter as well."
|
|
::= { swPortCounterEntry 5 }
|
|
|
|
swPortFramesSent OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good frames sent."
|
|
::= { swPortCounterEntry 6 }
|
|
|
|
swPortTotalBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of bytes received(good and bad)."
|
|
::= { swPortCounterEntry 7 }
|
|
|
|
swPortTotalFramesReceived OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames bytes received(good and bad)."
|
|
::= { swPortCounterEntry 8 }
|
|
|
|
swPortBroadcastFramesReceived OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good broadcast frames received. Local and dropped
|
|
packets increment the counter as well."
|
|
::= { swPortCounterEntry 9 }
|
|
|
|
swPortMulticastFramesReceived OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good multicast frames received. Local and dropped
|
|
packets increment the counter as well."
|
|
::= { swPortCounterEntry 10 }
|
|
|
|
swPortCRCError OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames with valid packet length and CRC error or
|
|
misaligned(odd number of nibbles)
|
|
increment the counter as well."
|
|
::= { swPortCounterEntry 11 }
|
|
|
|
swPortOversizeFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good frames with length more than 1518 bytes (
|
|
or 1522 bytes for LongEn = 1)."
|
|
::= { swPortCounterEntry 12 }
|
|
|
|
swPortFragments OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good bytes received. Local and dropped packets
|
|
increment the counter as well."
|
|
::= { swPortCounterEntry 13 }
|
|
|
|
swPortJabber OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames with length more than 1518 bytes and with
|
|
CRC error or misaligned."
|
|
::= { swPortCounterEntry 14 }
|
|
|
|
swPortCollision OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Collisions"
|
|
::= { swPortCounterEntry 15 }
|
|
|
|
swPortLateCollision OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Late Collision(collision occurring later than
|
|
576th transmitted bit"
|
|
::= { swPortCounterEntry 16 }
|
|
|
|
swPortFrames64Bytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good packets with length of 64 bytes "
|
|
::= { swPortCounterEntry 17 }
|
|
|
|
swPortFrames65To127Bytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good packets with length between 65 to 127 bytes "
|
|
::= { swPortCounterEntry 18 }
|
|
|
|
swPortFrames128To255Bytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good packets with length between 128 to 255 bytes "
|
|
::= { swPortCounterEntry 19 }
|
|
|
|
swPortFrames256To511Bytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good packets with length between 256 to 511 bytes "
|
|
::= { swPortCounterEntry 20 }
|
|
|
|
swPortFrames512To1023Bytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good packets with length between 512 to 1023 bytes "
|
|
::= { swPortCounterEntry 21 }
|
|
|
|
swPortFrames1024To1522Bytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of good packets with length between 1024 to 1522 bytes "
|
|
::= { swPortCounterEntry 22 }
|
|
|
|
swPortMACRxError OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames with RX MAC Error "
|
|
::= { swPortCounterEntry 23 }
|
|
|
|
-- swPortDroppedFrames OBJECT-TYPE
|
|
-- SYNTAX Counter
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "The number of dropped frames.Dropped packets are those which a
|
|
-- receive buffer could not be allocated."
|
|
-- ::= { swPortCounterEntry 24 }
|
|
|
|
-- link up/down Trap
|
|
|
|
linkChangeEvent TRAP-TYPE
|
|
ENTERPRISE dlink
|
|
VARIABLES {
|
|
swPortInfoIndex,
|
|
swPortInfoType,
|
|
swPortInfoPartitionStatus,
|
|
swPortInfoLinkStatus,
|
|
swPortInfoDuplexMode
|
|
}
|
|
DESCRIPTION
|
|
"The trap is sent whenever the link state of a port changes
|
|
from link up to link down or from link down to link up"
|
|
::= 1
|
|
|
|
|
|
portPartition TRAP-TYPE
|
|
ENTERPRISE dlink
|
|
VARIABLES {
|
|
swPortInfoIndex,
|
|
swPortInfoType,
|
|
swPortInfoPartitionStatus,
|
|
swPortInfoLinkStatus,
|
|
swPortInfoDuplexMode
|
|
}
|
|
DESCRIPTION
|
|
"The trap is sent whenever the port state enter the Partion
|
|
mode when more than 32 collisions occur while trasmitting."
|
|
::= 2
|
|
|
|
END
|