1260 lines
43 KiB
Plaintext
1260 lines
43 KiB
Plaintext
------------------------------------------------------------------------------
|
|
------------------------------------------------------------------------------
|
|
--
|
|
--
|
|
------------------------------------------------------------------------------
|
|
-- Groups in the company MIB
|
|
--
|
|
-- The following groups are supported for company
|
|
--
|
|
-- Active....
|
|
-- companyCommGroup Permits the user to configure the communities
|
|
-- companyHostGroup Permits the user to configure the hosts
|
|
-- companyMiscGroup Permits the user to configure miscellaneous items
|
|
-- companySpanGroup Permits the user to configure Spanning Tree
|
|
--
|
|
--
|
|
------------------------------------------------------------------------------
|
|
------------------------------------------------------------------------------
|
|
DES-2110-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE FROM RFC-1212
|
|
enterprises,
|
|
Counter, TimeTicks, IpAddress FROM RFC1155-SMI
|
|
mib-2,
|
|
DisplayString, PhysAddress FROM RFC1213-MIB;
|
|
|
|
|
|
d-link OBJECT IDENTIFIER ::= { enterprises 171 }
|
|
dlink-products OBJECT IDENTIFIER ::= { d-link 10 }
|
|
dlink-DES21XXSeriesProd OBJECT IDENTIFIER ::= { dlink-products 61}
|
|
des-2110 OBJECT IDENTIFIER ::= { dlink-DES21XXSeriesProd 1 }
|
|
|
|
-- textual conventions
|
|
|
|
OwnerString ::= DisplayString
|
|
MacAddress ::= OCTET STRING (SIZE (6))
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
RowStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notInService(2),
|
|
notReady(3),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
|
|
|
|
-- This data type is used to model an administratively
|
|
-- assigned name of the owner of a resource. This
|
|
-- information is taken from the NVT ASCII character set.
|
|
-- It is suggested that this name contain one or more
|
|
-- of the following:
|
|
-- IP address, management station name, network manager's
|
|
-- name, location, or phone number.
|
|
-- In some cases the agent itself will be the owner of
|
|
-- an entry. In these cases, this string shall be set
|
|
-- to a string starting with 'monitor'.
|
|
--
|
|
-- SNMP access control is articulated entirely in terms of
|
|
-- the contents of MIB views; access to a particular SNMP
|
|
-- object instance depends only upon its presence or
|
|
-- absence in a particular MIB view and never upon its
|
|
-- value or the value of related object instances. Thus,
|
|
-- objects of this type afford resolution of resource
|
|
-- contention only among cooperating managers; they
|
|
-- realize no access control function with respect
|
|
-- to uncooperative parties.
|
|
--
|
|
-- By convention, objects with this syntax are declared
|
|
-- as having
|
|
--
|
|
-- SIZE (0..127)
|
|
|
|
|
|
--
|
|
-- company Enterprise MIB Extensions
|
|
--
|
|
companyCommGroup OBJECT IDENTIFIER ::= { des-2110 1 }
|
|
companyMiscGroup OBJECT IDENTIFIER ::= { des-2110 3 }
|
|
companySpanGroup OBJECT IDENTIFIER ::= { des-2110 4 }
|
|
--
|
|
companyConfigGroup OBJECT IDENTIFIER ::= { des-2110 11 }
|
|
companyPVlanGroup OBJECT IDENTIFIER ::= { des-2110 12 }
|
|
companyTVlanGroup OBJECT IDENTIFIER ::= { des-2110 13 }
|
|
--
|
|
companyStaticGroup OBJECT IDENTIFIER ::= { des-2110 21 }
|
|
companyIgsGroup OBJECT IDENTIFIER ::= { des-2110 22 }
|
|
companyStormCtrlGroup OBJECT IDENTIFIER ::= { des-2110 23 }
|
|
|
|
|
|
--
|
|
-- company Extension MIB, Set Community Information
|
|
--
|
|
commSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CommSetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Set Community Entries "
|
|
::= { companyCommGroup 1 }
|
|
|
|
commSetEntry OBJECT-TYPE
|
|
SYNTAX CommSetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Set Community properties"
|
|
INDEX { commSetIndex }
|
|
::= { commSetTable 1 }
|
|
|
|
CommSetEntry ::= SEQUENCE {
|
|
commSetIndex INTEGER,
|
|
commSetName DisplayString,
|
|
commSetStatus RowStatus
|
|
}
|
|
|
|
commSetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Community Table. Eight entries are currently supported."
|
|
::= { commSetEntry 1 }
|
|
|
|
commSetName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of this SNMP Set Community Entry."
|
|
::= { commSetEntry 2 }
|
|
|
|
commSetStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RowStatus for the Set Community entry."
|
|
::= { commSetEntry 3 }
|
|
|
|
--
|
|
-- company Extension MIB, Get Community Information
|
|
--
|
|
commGetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CommGetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Get Community Entries "
|
|
::= { companyCommGroup 2 }
|
|
|
|
commGetEntry OBJECT-TYPE
|
|
SYNTAX CommGetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Get Community properties"
|
|
INDEX { commGetIndex }
|
|
::= { commGetTable 1 }
|
|
|
|
CommGetEntry ::= SEQUENCE {
|
|
commGetIndex INTEGER,
|
|
commGetName DisplayString,
|
|
commGetStatus RowStatus
|
|
}
|
|
|
|
commGetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Community Table. Eight entries are currently supported."
|
|
::= { commGetEntry 1 }
|
|
|
|
commGetName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of this SNMP Get Community Entry."
|
|
::= { commGetEntry 2 }
|
|
|
|
commGetStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RowStatus for the Get Community entry."
|
|
::= { commGetEntry 3 }
|
|
|
|
--
|
|
-- company Extension MIB, Trap Community Information
|
|
--
|
|
commTrapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CommTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Trap Community Entries "
|
|
::= { companyCommGroup 3 }
|
|
|
|
commTrapEntry OBJECT-TYPE
|
|
SYNTAX CommTrapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SNMP Trap Community properties"
|
|
INDEX { commTrapIndex }
|
|
::= { commTrapTable 1 }
|
|
|
|
CommTrapEntry ::= SEQUENCE {
|
|
commTrapIndex INTEGER,
|
|
commTrapName DisplayString,
|
|
commTrapIpAddress IpAddress,
|
|
commTrapVlanId INTEGER,
|
|
commTrapSNMPBootup INTEGER,
|
|
commTrapSNMPTPLinkUpDown INTEGER,
|
|
commTrapSNMPFiberLinkUpDown INTEGER,
|
|
commTrapTrapAbnormalTPRXError INTEGER,
|
|
commTrapTrapAbnormalTPTXError INTEGER,
|
|
commTrapTrapAbnormalFiberRXError INTEGER,
|
|
commTrapTrapAbnormalFiberTXError INTEGER,
|
|
commTrapStatus RowStatus
|
|
}
|
|
|
|
commTrapIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Community Table. Eight entries are currently supported."
|
|
::= { commTrapEntry 1 }
|
|
|
|
commTrapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of this SNMP Trap Community Entry."
|
|
::= { commTrapEntry 2 }
|
|
|
|
commTrapIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address of this SNMP Trap Community Entry."
|
|
::= { commTrapEntry 3 }
|
|
|
|
commTrapVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Trap VLAN identifier of this SNMP Trap Community Entry.
|
|
The value must be from 1 to 4094."
|
|
::= { commTrapEntry 4 }
|
|
|
|
commTrapSNMPBootup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Bootup trap"
|
|
::= { commTrapEntry 5 }
|
|
|
|
commTrapSNMPTPLinkUpDown OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Twisted Pair link up / link down trap"
|
|
::= { commTrapEntry 6 }
|
|
|
|
commTrapSNMPFiberLinkUpDown OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fiber link up / link down trap"
|
|
::= { commTrapEntry 7 }
|
|
|
|
commTrapTrapAbnormalTPRXError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Twisted Pair abnormal receive error trap"
|
|
::= { commTrapEntry 9 }
|
|
|
|
commTrapTrapAbnormalTPTXError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Twisted Pair abnormal transmit error trap"
|
|
::= { commTrapEntry 10 }
|
|
|
|
commTrapTrapAbnormalFiberRXError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fiber abnormal receive error trap"
|
|
::= { commTrapEntry 11 }
|
|
|
|
commTrapTrapAbnormalFiberTXError OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Fiber abnormal transmit error trap"
|
|
::= { commTrapEntry 12 }
|
|
|
|
commTrapStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RowStatus for the Trap Community entry."
|
|
::= { commTrapEntry 13 }
|
|
|
|
|
|
--
|
|
-- company Extension MIB, Miscellaneous Information
|
|
--
|
|
|
|
miscReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
noop(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Physically resets the unit - use with care. A (1) resets
|
|
the unit, a (2) does nothing."
|
|
::= { companyMiscGroup 2 }
|
|
|
|
miscStatisticsReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
noop(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the units statistics. A (1) resets
|
|
the unit, a (2) does nothing."
|
|
::= { companyMiscGroup 3 }
|
|
|
|
--
|
|
-- company Extension MIB, Spanning Tree Configuration
|
|
--
|
|
spanOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable Spanning Tree. A (1) enables, a (2) disables."
|
|
::= { companySpanGroup 1 }
|
|
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- Products Extension
|
|
-- ---------------------------------------------------------------------
|
|
configVerSwPrimary OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The software image version string"
|
|
::= { companyConfigGroup 1 }
|
|
|
|
configVerHwChipSet OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..31))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The hardware chipset version string"
|
|
::= { companyConfigGroup 2 }
|
|
|
|
configPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of interface entries used for enterprise specific
|
|
configuration. The number of entries is given by the value
|
|
of ifNumber. All interface entries are assumed to be
|
|
Ethernet interafaces."
|
|
::= { companyConfigGroup 6 }
|
|
|
|
configPortEntry OBJECT-TYPE
|
|
SYNTAX ConfigPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An enterprise specific interface entry."
|
|
INDEX { configPort }
|
|
::= { configPortTable 1 }
|
|
|
|
ConfigPortEntry ::= SEQUENCE {
|
|
configPort INTEGER,
|
|
configPortSpeed INTEGER,
|
|
configPortOperStatus INTEGER,
|
|
configPortFlowControl INTEGER,
|
|
configPortFlowControlOper INTEGER,
|
|
configPortPriority INTEGER
|
|
}
|
|
|
|
configPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each interface that correlates to ifIndex.
|
|
Its value ranges between 1 and the value of ifNumber."
|
|
::= { configPortEntry 1 }
|
|
|
|
configPortSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
auto(2),
|
|
rate10M-Half(3),
|
|
rate10M-Full(4),
|
|
rate100M-Half(5),
|
|
rate100M-Full(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's speed desired state."
|
|
::= { configPortEntry 2 }
|
|
|
|
configPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
rate10M-Half(2),
|
|
rate10M-Full(3),
|
|
rate100M-Half(4),
|
|
rate100M-Full(5),
|
|
rate1G-Half(6),
|
|
rate1G-Full(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's operating speed state."
|
|
::= { configPortEntry 3 }
|
|
|
|
configPortFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port will avoid transmitting a new packet
|
|
for the period of time specified in a received
|
|
PAUSE packet when enabled."
|
|
::= { configPortEntry 4 }
|
|
|
|
configPortFlowControlOper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's operating flow control state."
|
|
::= { configPortEntry 5 }
|
|
|
|
configPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
high(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's current priority."
|
|
::= { configPortEntry 6 }
|
|
|
|
--
|
|
-- VLAN Mode
|
|
--
|
|
configVLANMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
modePortBased(1),
|
|
modeTagBased(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Determines the VLAN mode."
|
|
::= { companyConfigGroup 7 }
|
|
|
|
--
|
|
-- Additional Configuration objects
|
|
--
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- Mirror
|
|
-- ---------------------------------------------------------------------
|
|
configMirrorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ConfigMirrorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of the Mirror"
|
|
::= { companyConfigGroup 8 }
|
|
|
|
configMirrorEntry OBJECT-TYPE
|
|
SYNTAX ConfigMirrorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Mirror entry containing the Mirror id and mode"
|
|
INDEX { configMirrorId }
|
|
::= { configMirrorTable 1 }
|
|
|
|
ConfigMirrorEntry ::= SEQUENCE {
|
|
configMirrorId INTEGER,
|
|
configMirrorMode INTEGER,
|
|
configMirrorMon INTEGER,
|
|
configMirrorSrc PortList,
|
|
configMirrorStatus RowStatus
|
|
}
|
|
|
|
configMirrorId OBJECT-TYPE
|
|
SYNTAX INTEGER (1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index that uniquely identifies an entry in the
|
|
Mirror Table. One entries are currently supported."
|
|
::= { configMirrorEntry 1 }
|
|
|
|
configMirrorMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
rx(1),
|
|
tx(2),
|
|
both(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When deciding the mirroring source port, then Mirror mode will
|
|
be available."
|
|
::= { configMirrorEntry 2 }
|
|
|
|
configMirrorMon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When mirroring is enabled (configMirroringMode =
|
|
ingress, egress, both), this identifies the mirroring monitoring
|
|
port. This value has a valid range of 1 to ifNumber when
|
|
enabled."
|
|
::= { configMirrorEntry 3 }
|
|
|
|
configMirrorSrc OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When mirroring is enabled (configMirroringMode =
|
|
ingress, egress, both), this identifies the mirroring source port.
|
|
This value has a valid range of 1 to ifNumber when enbaled.
|
|
Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
::= { configMirrorEntry 4 }
|
|
|
|
configMirrorStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RowStatus for the Mirror entry."
|
|
::= { configMirrorEntry 5 }
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- SNMP Function
|
|
-- ---------------------------------------------------------------------
|
|
configSNMPEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable SNMP function. A (1) enables, a (2) disables."
|
|
::= { companyConfigGroup 9 }
|
|
|
|
-- ---------------------------------------------------------------------
|
|
--
|
|
-- ---------------------------------------------------------------------
|
|
configIpAssignmentMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual(1),
|
|
dhcp(2),
|
|
other(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the device address is assigned by
|
|
the user (manual), or DHCP, or Others(BootP)."
|
|
::= { companyConfigGroup 12 }
|
|
|
|
configPhysAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface's address at the protocol layer
|
|
immediately 'below' the network layer in the
|
|
protocol stack. This is the physical address
|
|
for the end-station."
|
|
::= { companyConfigGroup 13 }
|
|
|
|
configPasswordAdmin OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The adminstrator password"
|
|
::= { companyConfigGroup 15 }
|
|
|
|
configIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address for the RDU box."
|
|
::= { companyConfigGroup 16 }
|
|
|
|
configNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The network mask for the RDU box."
|
|
::= { companyConfigGroup 17 }
|
|
|
|
configGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Gatway Address for the unit."
|
|
::= { companyConfigGroup 18 }
|
|
|
|
configSave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
save(1),
|
|
noop(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Physically saves the current configuration to nvram.
|
|
- use with care.
|
|
(1) saves the configuration
|
|
(2) does nothing."
|
|
::= { companyConfigGroup 19 }
|
|
|
|
configRestoreDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
restore(1),
|
|
noop(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Restores the configuration of the unit to the
|
|
original settings."
|
|
::= { companyConfigGroup 22 }
|
|
|
|
|
|
--
|
|
-- The PVLAN group
|
|
--
|
|
|
|
pvlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PvlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of the Port-based VLANs"
|
|
::= { companyPVlanGroup 1 }
|
|
|
|
pvlanEntry OBJECT-TYPE
|
|
SYNTAX PvlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Port-based VLAN entry containing the id and name."
|
|
INDEX { pvlanId }
|
|
::= { pvlanTable 1 }
|
|
|
|
PvlanEntry ::= SEQUENCE {
|
|
pvlanId INTEGER,
|
|
pvlanName DisplayString,
|
|
pvlanMember PortList,
|
|
pvlanStatus INTEGER
|
|
}
|
|
|
|
pvlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VLAN identifier. A maximum of 28 VLANs is supported.
|
|
The value must be from 1 to 28"
|
|
::= { pvlanEntry 1 }
|
|
|
|
pvlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VLAN name associated with the Id."
|
|
::= { pvlanEntry 2 }
|
|
|
|
pvlanMember OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The set of the device's member ports that belong
|
|
to the VLAN.
|
|
Each octet within the value of this object specifies a
|
|
set of eight ports, with the first octet specifying ports
|
|
1 through 8, the second octet specifying ports 9
|
|
through 16, etc. Within each octet, the most
|
|
significant bit represents the lowest numbered
|
|
port, and the least significant bit represents the
|
|
highest numbered port. Thus, each port of the
|
|
VLAN is represented by a single bit within the
|
|
value of this object. If that bit has a value of
|
|
'1' then that port is included in the set of
|
|
ports; the port is not included if its bit has a
|
|
value of '0'."
|
|
|
|
::= { pvlanEntry 3 }
|
|
|
|
pvlanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
createAndGo (4),
|
|
destroy (6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of an entry in the VLAN Table. Only a subset
|
|
of the rowstatus variables (active, createAndGo, destroy)
|
|
are available."
|
|
::= { pvlanEntry 5 }
|
|
|
|
--
|
|
-- The TVLAN group
|
|
--
|
|
|
|
tvlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TvlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of the VLANs"
|
|
::= { companyTVlanGroup 1 }
|
|
|
|
tvlanEntry OBJECT-TYPE
|
|
SYNTAX TvlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A VLAN entry containing the VLAN id and name."
|
|
INDEX { tvlanId }
|
|
::= { tvlanTable 1 }
|
|
|
|
TvlanEntry ::= SEQUENCE {
|
|
tvlanId INTEGER,
|
|
-- tvlanName DisplayString,
|
|
tvlanMember PortList,
|
|
tvlanUntaggedPorts PortList,
|
|
tvlanStatus INTEGER
|
|
}
|
|
|
|
tvlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VLAN identifier. A maximum of 64 VLANs is supported.
|
|
The value must be from 1 to 4094."
|
|
::= { tvlanEntry 1 }
|
|
|
|
tvlanMember OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The set of the device's member ports that belong
|
|
to the VLAN.
|
|
|
|
Each octet within the value of this object specifies a
|
|
set of eight ports, with the first octet specifying ports
|
|
1 through 8, the second octet specifying ports 9
|
|
through 16, etc. Within each octet, the most
|
|
significant bit represents the lowest numbered
|
|
port, and the least significant bit represents the
|
|
highest numbered port. Thus, each port of the
|
|
VLAN is represented by a single bit within the
|
|
value of this object. If that bit has a value of
|
|
'1' then that port is included in the set of
|
|
ports; the port is not included if its bit has a
|
|
value of '0'."
|
|
|
|
::= { tvlanEntry 3 }
|
|
|
|
tvlanUntaggedPorts OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If that bit has a value of '1' the outgoing frame on the egress
|
|
port is untagged. If that bit has a value of '0' the outgoing
|
|
frame on the egress port is tagged."
|
|
::= { tvlanEntry 4 }
|
|
|
|
tvlanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
createAndGo (4),
|
|
destroy (6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of an entry in the VLAN Table. Only a subset
|
|
of the rowstatus variables (active, createAndGo, destroy)
|
|
are available."
|
|
::= { tvlanEntry 5 }
|
|
|
|
|
|
tvlanPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TvlanPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of ports and their associated VLAN."
|
|
::= { companyTVlanGroup 2 }
|
|
|
|
tvlanPortEntry OBJECT-TYPE
|
|
SYNTAX TvlanPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information pertaining to an individual port regarding
|
|
to which VLAN it belongs."
|
|
INDEX { tvlanPortPortId }
|
|
::= { tvlanPortTable 1 }
|
|
|
|
TvlanPortEntry ::= SEQUENCE {
|
|
tvlanPortPortId INTEGER,
|
|
tvlanPortVlanId INTEGER,
|
|
tvlanPortPriority INTEGER
|
|
}
|
|
|
|
tvlanPortPortId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A port identifier that is in the range of 1 to ifNumber."
|
|
::= { tvlanPortEntry 1 }
|
|
|
|
tvlanPortVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The default VLAN identifier."
|
|
::= { tvlanPortEntry 2 }
|
|
|
|
tvlanPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The default priority."
|
|
::= { tvlanPortEntry 3 }
|
|
|
|
tvlanManagement OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The management vlan which allow to forwarding to cpu."
|
|
::= { companyTVlanGroup 3 }
|
|
|
|
|
|
--
|
|
-- The STATIC MAC group
|
|
--
|
|
|
|
staticOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable Static MAC. A (1) enables, a (2) disables."
|
|
::= { companyStaticGroup 1 }
|
|
|
|
staticAutoLearning OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The set of the device's member ports that belong
|
|
to the Static MAC auto learning enable/disable.
|
|
Each octet within the value of this object specifies a
|
|
set of eight ports, with the first octet specifying ports
|
|
1 through 8, the second octet specifying ports 9
|
|
through 16, etc. Within each octet, the most
|
|
significant bit represents the lowest numbered
|
|
port, and the least significant bit represents the
|
|
highest numbered port. Thus, each port is represented
|
|
by a single bit within the value of this object.
|
|
If that bit has a value of '1' then that port is in auto
|
|
learning enable state; the port is not in auto learning
|
|
state if its bit has a value of '0'."
|
|
::= { companyStaticGroup 2 }
|
|
|
|
staticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StaticEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of the Static MACs"
|
|
::= { companyStaticGroup 3 }
|
|
|
|
staticEntry OBJECT-TYPE
|
|
SYNTAX StaticEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Static MAC entry containing the mac and forwarding port."
|
|
INDEX { staticId }
|
|
::= { staticTable 1 }
|
|
|
|
StaticEntry ::= SEQUENCE {
|
|
staticId INTEGER,
|
|
staticMac DisplayString,
|
|
staticPort INTEGER,
|
|
staticVlanID INTEGER,
|
|
staticStatus INTEGER
|
|
}
|
|
|
|
staticId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC identifier. A maximum of 60 Static MACs is supported.
|
|
The value must be from 1 to 60"
|
|
::= { staticEntry 1 }
|
|
|
|
staticMac OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..12))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC associated with the Id."
|
|
::= { staticEntry 2 }
|
|
|
|
staticPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC forwarding port with the ID."
|
|
::= { staticEntry 3 }
|
|
|
|
staticVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC VLAN ID with the ID."
|
|
::= { staticEntry 4 }
|
|
|
|
staticStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active (1),
|
|
createAndGo (4),
|
|
destroy (6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of an entry in the Static MAC Table. Only a subset
|
|
of the rowstatus variables (active, createAndGo, destroy)
|
|
are available."
|
|
::= { staticEntry 5 }
|
|
|
|
|
|
--
|
|
-- The IGS Groups
|
|
--
|
|
|
|
igsSystem OBJECT IDENTIFIER ::= { companyIgsGroup 1 }
|
|
igsBrg OBJECT IDENTIFIER ::= { companyIgsGroup 2 }
|
|
|
|
--
|
|
-- The IGS System Group
|
|
--
|
|
|
|
igsStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enables or disables IGMP snooping in the system"
|
|
DEFVAL { 2 }
|
|
::= { igsSystem 2 }
|
|
|
|
igsRouterPortPurgeInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..600)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the interval (in seconds) after which a learnt
|
|
router port entry will be purged.
|
|
|
|
For each router port learnt, a 'RouterPortPurgeTimer' runs for
|
|
'RouterPortPurgeInterval'.
|
|
|
|
This timer will be restarted whenever a router control message is
|
|
received over that port. If no router control mssages are received
|
|
for 'RouterPortPurgeInterval' time, the learnt router port entry
|
|
will be purged "
|
|
DEFVAL { 125 }
|
|
::= { igsSystem 4 }
|
|
|
|
igsHostPortPurgeInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1225)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the interval (in seconds) after which a learnt
|
|
host port entry will be purged.
|
|
|
|
For each host port learnt, a 'PortPurgeTimer' runs for
|
|
'HostPortPurgeInterval'.
|
|
|
|
This timer will be restarted whenever a report message from host is
|
|
received over that port. If no report mssages are received
|
|
for 'HostPortPurgeInterval' time, the learnt host entry
|
|
will be purged from the multicast group "
|
|
DEFVAL {260}
|
|
::= { igsSystem 5 }
|
|
|
|
--
|
|
-- The IGS Bridge Group
|
|
--
|
|
|
|
igsBrgRouterPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains list of bridge ports through which a router
|
|
is reachable. These router ports can be learnt through
|
|
control messages received from routers, and statically
|
|
configured"
|
|
::= { igsBrg 1 }
|
|
|
|
-- Multicast Forwarding Table
|
|
|
|
igsBrgMcastFwdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IgsBrgMcastFwdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains multicast forwarding information
|
|
learnt when VLAN is DISABLED in the system."
|
|
::= { igsBrg 2 }
|
|
|
|
igsBrgMcastFwdEntry OBJECT-TYPE
|
|
SYNTAX IgsBrgMcastFwdEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains multicast group address and the
|
|
list of ports who have members for the multicast group."
|
|
INDEX { igsBrgMcastFwdGroupAddress }
|
|
::= { igsBrgMcastFwdTable 1 }
|
|
|
|
IgsBrgMcastFwdEntry ::=
|
|
SEQUENCE {
|
|
igsBrgMcastFwdGroupAddress
|
|
MacAddress,
|
|
igsBrgMcastFwdPortListMac
|
|
PortList
|
|
}
|
|
|
|
igsBrgMcastFwdGroupAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC multicast group address."
|
|
::= { igsBrgMcastFwdEntry 1 }
|
|
|
|
igsBrgMcastFwdPortListMac OBJECT-TYPE
|
|
SYNTAX PortList
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of ports who have members for the MAC multicast
|
|
group."
|
|
::= { igsBrgMcastFwdEntry 2 }
|
|
|
|
|
|
--
|
|
-- The ARP STORM CONTROL group
|
|
--
|
|
|
|
stormctrlOnOff OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable/Disable ARP STORM CONTROL. A (1) enables, a (2) disables."
|
|
::= { companyStormCtrlGroup 1 }
|
|
|
|
stormctrlStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
locked(1),
|
|
unlock(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unlock ARP STORM CONTROL mechanism. A (1) locked, a (2) unlock."
|
|
::= { companyStormCtrlGroup 2 }
|
|
|
|
|
|
-- *****************************************************************
|
|
--
|
|
-- Enterprise Trap group
|
|
--
|
|
-- *****************************************************************
|
|
|
|
swFiberInsert TRAP-TYPE
|
|
ENTERPRISE des-2110
|
|
DESCRIPTION
|
|
"Fiber insert trap"
|
|
::= 1
|
|
|
|
swFiberRemove TRAP-TYPE
|
|
ENTERPRISE des-2110
|
|
DESCRIPTION
|
|
"Fiber remove trap"
|
|
::= 2
|
|
|
|
swFiberAbnormalRXError TRAP-TYPE
|
|
ENTERPRISE des-2110
|
|
DESCRIPTION
|
|
"Fiber abnormal rx error trap"
|
|
::= 3
|
|
|
|
swFiberAbnormalTXError TRAP-TYPE
|
|
ENTERPRISE des-2110
|
|
DESCRIPTION
|
|
"Fiber abnormal tx error trap"
|
|
::= 4
|
|
|
|
swTPAbnormalRXError TRAP-TYPE
|
|
ENTERPRISE des-2110
|
|
DESCRIPTION
|
|
"Twisted Pair abnormal rx error trap"
|
|
::= 5
|
|
|
|
swTPAbnormalTXError TRAP-TYPE
|
|
ENTERPRISE des-2110
|
|
DESCRIPTION
|
|
"Twisted Pair abnormal tx error trap"
|
|
::= 6
|
|
|
|
END
|