WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/d-link/DES-1210-10AXME

12986 lines
465 KiB
Plaintext
Raw Blame History

DES-1210-10AXME DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
enterprises, IpAddress, Integer32, Unsigned32, TimeTicks, Counter32
FROM SNMPv2-SMI
InetAddress FROM INET-ADDRESS-MIB
InterfaceIndex,InterfaceIndexOrZero
FROM IF-MIB
VlanId FROM Q-BRIDGE-MIB
SnmpAdminString,SnmpEngineID,SnmpSecurityLevel FROM SNMP-FRAMEWORK-MIB
RowStatus, TruthValue, DisplayString,
TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC;
dlink OBJECT IDENTIFIER ::= { enterprises 171 }
dlink-products OBJECT IDENTIFIER ::= { dlink 10 }
dlink-DES1210SeriesProd OBJECT IDENTIFIER ::= { dlink-products 75}
des-1210-10axme OBJECT IDENTIFIER ::= { dlink-DES1210SeriesProd 14 }
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
BridgeId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Bridge-Identifier as used in the
Spanning Tree
Protocol to uniquely identify a bridge. Its first two
octets (in network byte order) contain a priority
value and its last 6 octets contain the MAC address
used to refer to a bridge in a unique fashion
(typically, the numerically smallest MAC address
of all ports on the bridge).
Several objects in this MIB module represent values of
timers used by the Spanning Tree Protocol. In this
MIB, these timers have values in units of hundreths of
a second (i.e. 1/100 secs).
These timers, when stored in a Spanning Tree Protocol's
BPDU, are in units of 1/256 seconds. Note, however,
that 802.1D-1990 specifies a settable granularity of
no more than 1 second for these timers. To avoid
ambiguity, a data type is defined here as a textual
convention and all representation of these timers
in this MIB module are defined using this data type. An
algorithm is also defined for converting between the
different units, to ensure a timer's value is not distorted by multiple conversions."
SYNTAX OCTET STRING (SIZE (8))
Timeout ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d4"
STATUS current
DESCRIPTION
"A STP timer in units of 1/100 seconds
To convert a Timeout value into a value in units of
1/256 seconds, the following algorithm should be used:
b = floor( (n * 256) / 100)
where:
floor = quotient [ignore remainder]
n is the value in 1/100 second units
b is the value in 1/256 second units
To convert the value from 1/256 second units back to
1/100 seconds, the following algorithm should be used:
n = ceiling( (b * 100) / 256)
where:
ceiling = quotient [if remainder is 0], or
quotient + 1 [if remainder is non-zero]
n is the value in 1/100 second units
b is the value in 1/256 second units
Note: it is important that the arithmetic operations are
done in the order specified (i.e., multiply first, divide
second)."
SYNTAX INTEGER
OwnerString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model an administratively
assigned name of the owner of a resource. Implementations
must accept values composed of well-formed NVT ASCII
sequences. In addition, implementations should accept
values composed of well-formed UTF-8 sequences.
It is suggested that this name contain one or more of
the following: IP address, management station name,
network manager's name, location, or phone number.
In some cases the agent itself will be the owner of
an entry. In these cases, this string shall be set
to a string starting with 'monitor'.
SNMP access control is articulated entirely in terms
of the contents of MIB views; access to a particular
SNMP object instance depends only upon its presence
or absence in a particular MIB view and never upon
its value or the value of related object instances.
Thus, objects of this type afford resolution of
resource contention only among cooperating
managers; they realize no access control function
with respect to uncooperative parties."
SYNTAX OCTET STRING (SIZE (0..127))
RmonStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of a table entry.
Setting this object to the value invalid(4) has the
effect of invalidating the corresponding entry.
That is, it effectively disassociates the mapping
identified with said entry.
It is an implementation-specific matter as to whether
the agent removes an invalidated entry from the table.
Accordingly, management stations must be prepared to
receive tabular information from agents that corresponds
to entries currently not in use. Proper
interpretation of such entries requires examination
of the relevant RmonStatus object.
An existing instance of this object cannot be set to
createRequest(2). This object may only be set to
createRequest(2) when this instance is created. When
this object is created, the agent may wish to create
supplemental object instances with default values
to complete a conceptual row in this table. Because the
creation of these default objects is entirely at the option
of the agent, the manager must not assume that any will be
created, but may make use of any that are created.
Immediately after completing the create operation, the agent
must set this object to underCreation(3).
When in the underCreation(3) state, an entry is allowed to
exist in a possibly incomplete, possibly inconsistent state,
usually to allow it to be modified in multiple PDUs. When in
this state, an entry is not fully active.
Entries shall exist in the underCreation(3) state until
the management station is finished configuring the entry
and sets this object to valid(1) or aborts, setting this
object to invalid(4). If the agent determines that an
entry has been in the underCreation(3) state for an
abnormally long time, it may decide that the management
station has crashed. If the agent makes this decision,
it may set this object to invalid(4) to reclaim the
entry. A prudent agent will understand that the
management station may need to wait for human input
and will allow for that possibility in its
determination of this abnormally long period.
An entry in the valid(1) state is fully configured and
consistent and fully represents the configuration or
operation such a row is intended to represent. For
example, it could be a statistical function that is
configured and active, or a filter that is available
in the list of filters processed by the packet capture
process.
A manager is restricted to changing the state of an entry in
the following ways:
To: valid createRequest underCreation invalid
From:
valid OK NO OK OK
createRequest N/A N/A N/A N/A
underCreation OK NO OK OK
invalid NO NO NO OK
nonExistent NO OK NO OK
In the table above, it is not applicable to move the state
from the createRequest state to any other state because the
manager will never find the variable in that state. The
nonExistent state is not a value of the enumeration, rather
it means that the entryStatus variable does not exist at all.
An agent may allow an entryStatus variable to change state in
additional ways, so long as the semantics of the states are
followed. This allowance is made to ease the implementation of
the agent and is made despite the fact that managers should
never exercise these additional state transitions."
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
-- ----------------------------------------------------------------- --
-- groups in the MIB
-- ----------------------------------------------------------------- --
companySystem OBJECT IDENTIFIER ::= { des-1210-10axme 1 }
dhcpBOOTPRelayControl OBJECT IDENTIFIER ::= { companyDHCPRelay 1 }
companyIpifGroup OBJECT IDENTIFIER ::= { des-1210-10axme 2 }
dhcpBOOTPRelayManagement OBJECT IDENTIFIER ::= { companyDHCPRelay 2 }
dhcpBOOTPRelayManagementOption82 OBJECT IDENTIFIER ::= { dhcpBOOTPRelayManagement 2 }
companyTftpGroup OBJECT IDENTIFIER ::= { des-1210-10axme 3 }
companyMiscGroup OBJECT IDENTIFIER ::= { des-1210-10axme 4 }
companySNMPV3 OBJECT IDENTIFIER ::= { des-1210-10axme 5 }
companySTP OBJECT IDENTIFIER ::= { des-1210-10axme 6 }
companyDot1qVlanGroup OBJECT IDENTIFIER ::= { des-1210-10axme 7 }
companyLA OBJECT IDENTIFIER ::= { des-1210-10axme 8 }
companyStaticMAC OBJECT IDENTIFIER ::= { des-1210-10axme 9 }
companyIgsGroup OBJECT IDENTIFIER ::= { des-1210-10axme 10 }
companyGVRPGroup OBJECT IDENTIFIER ::= { des-1210-10axme 11 }
companyQoSGroup OBJECT IDENTIFIER ::= { des-1210-10axme 12 }
companyTrafficMgmt OBJECT IDENTIFIER ::= { des-1210-10axme 13 }
companySecurity OBJECT IDENTIFIER ::= { des-1210-10axme 14 }
companyACLGroup OBJECT IDENTIFIER ::= { des-1210-10axme 15 }
companySyslog OBJECT IDENTIFIER ::= { des-1210-10axme 16 }
companyLBD OBJECT IDENTIFIER ::= { des-1210-10axme 17 }
companyMirror OBJECT IDENTIFIER ::= { des-1210-10axme 18 }
companyStaticMcast OBJECT IDENTIFIER ::= { des-1210-10axme 19 }
companySNTPSetting OBJECT IDENTIFIER ::= { des-1210-10axme 20 }
companyVoiceVlan OBJECT IDENTIFIER ::= { des-1210-10axme 21 }
companyRMON OBJECT IDENTIFIER ::= { des-1210-10axme 22 }
companyAuthGroup OBJECT IDENTIFIER ::= { des-1210-10axme 23 }
companyGuestVlan OBJECT IDENTIFIER ::= { des-1210-10axme 24 }
companyMacNotify OBJECT IDENTIFIER ::= { des-1210-10axme 25 }
companySMTP OBJECT IDENTIFIER ::= { des-1210-10axme 26 }
companyISMVLAN OBJECT IDENTIFIER ::= { des-1210-10axme 27 }
companyDHCPRelay OBJECT IDENTIFIER ::= { des-1210-10axme 28 }
companyDHCPLocalRelay OBJECT IDENTIFIER ::= { des-1210-10axme 29 }
companyTrapSetting OBJECT IDENTIFIER ::= { des-1210-10axme 30 }
companyLLDPSetting OBJECT IDENTIFIER ::= { des-1210-10axme 32 }
companyCPUInterfaceFilterGroup OBJECT IDENTIFIER ::= { des-1210-10axme 33 }
companyAutoSurveillanceVlan OBJECT IDENTIFIER ::= { des-1210-10axme 34 }
-- ---------------------------------------------------------------- --
-- ------------------------------------------------------------------
-- companySystem
-- ------------------------------------------------------------------
sysSwitchName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System name used for identification of the device.
The following characters are allowed to input.
0 ~ 9 / a ~ z / A ~ Z
Special character: ( ) <20>V + - = ."
::= { companySystem 1 }
sysHardwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version number of the Hardware."
DEFVAL { "" }
::= { companySystem 2 }
sysFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version number of the Firmware."
DEFVAL { "" }
::= { companySystem 3 }
sysLoginTimeoutInterval OBJECT-TYPE
SYNTAX Integer32 (3..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This time interval is used to count the time and
logout web interface automatically."
DEFVAL { 5 }
::= { companySystem 4 }
sysLocationName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The location name of this node (e.g., `telephone closet,
3rd floor'). If the location is unknown, the value is
the zero-length string."
::= { companySystem 5 }
sysGroupInterval OBJECT-TYPE
SYNTAX Integer32 (0 | 120..1225)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Group Interval is used to send D-link Discover packet to D-link
SmartConsole Utility frequency.
The timer in units of seconds.
Set value 0 to disable group Interval."
::= { companySystem 6 }
sysSafeGuardEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set Safeguard Enable\Disable."
DEFVAL { enable }
::= { companySystem 8 }
sysRestart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to restart the Switch
(i.e)the entire switch will operationally go down and
start again. Setting a value of 'true' causes the switch
to be restarted.
When the switch operationally goes down, configuration
save operation is initiated based on the configuration save
option chosen.
When the switch operationally come up, the saved configurations
are restored based on the restore option chosen.
Once the switch is restarted, the value of this object reverts
to 'false'."
DEFVAL { false }
::= { companySystem 9 }
sysSave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to save Configuration."
DEFVAL { false }
::= { companySystem 10 }
-- Port Control Table
sysPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { companySystem 13 }
sysPortCtrlEntry OBJECT-TYPE
SYNTAX SysPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { sysPortCtrlIndex , sysPortCtrlMediumType}
::= { sysPortCtrlTable 1 }
SysPortCtrlEntry ::=
SEQUENCE {
sysPortCtrlIndex
Integer32,
sysPortCtrlMediumType
INTEGER,
sysPortCtrlSpeed
INTEGER,
sysPortCtrlOperStatus
INTEGER,
sysPortCtrlMDI
INTEGER,
sysPortCtrlFlowControl
INTEGER,
sysPortCtrlFlowControlOper
INTEGER,
sysPortCtrlType
INTEGER
}
sysPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface index of the port for the configuration
in this entry applies."
::= { sysPortCtrlEntry 1 }
sysPortCtrlMediumType OBJECT-TYPE
SYNTAX INTEGER {
copper(100),
fiber1G(101),
fiber100M(102)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port type: fiber 1G/100M or copper."
::= { sysPortCtrlEntry 2 }
sysPortCtrlSpeed OBJECT-TYPE
SYNTAX INTEGER {
rate1000M-Full (1),
rate100M-Full (2),
rate100M-Half (3),
rate10M-Full (4),
rate10M-Half (5),
auto (6),
disable (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed."
::= { sysPortCtrlEntry 3 }
sysPortCtrlOperStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
rate1000M-Full (2),
rate100M-Full (3),
rate100M-Half (4),
rate10M-Full (5),
rate10M-Half (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's operating speed state."
::= { sysPortCtrlEntry 4 }
sysPortCtrlMDI OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
mdi (2),
mdix (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface auto/mdi/mdix mode.
The default setting is Auto."
::= { sysPortCtrlEntry 5 }
sysPortCtrlFlowControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface."
::= { sysPortCtrlEntry 6 }
sysPortCtrlFlowControlOper OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link parner negotiate port's operating flow control state."
::= { sysPortCtrlEntry 7 }
sysPortCtrlType OBJECT-TYPE
SYNTAX INTEGER {
fastethernet(1),
gigabitethernet(2),
fiberwith100BaseSFPModule(3),
fiberwith1000BaseSFPModule(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's media type."
::= { sysPortCtrlEntry 8 }
-- start DLINK-METRO-LIKE-GENERAL
sysPortDescriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysPortDescriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port description table."
::= { companySystem 14 }
sysPortDescriptionEntry OBJECT-TYPE
SYNTAX SysPortDescriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port description entry."
INDEX { sysPortDescIndex, sysPortDescMediumType }
::= { sysPortDescriptionTable 1 }
SysPortDescriptionEntry ::=
SEQUENCE {
sysPortDescIndex
INTEGER,
sysPortDescMediumType
INTEGER,
sysPortDescString
DisplayString
}
sysPortDescIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port index."
::= { sysPortDescriptionEntry 1 }
sysPortDescMediumType OBJECT-TYPE
SYNTAX INTEGER {
copper(100),
fiber1G(101),
fiber100M(102)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the port type: fiber 1G/100M or copper."
::= { sysPortDescriptionEntry 2 }
sysPortDescString OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port description."
::= { sysPortDescriptionEntry 3 }
-- end DLINK-METRO-LIKE-GENERAL
-- start DLINK-METRO-LIKE-GENERAL
sysPortErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysPortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port error table."
::= { companySystem 15 }
sysPortErrEntry OBJECT-TYPE
SYNTAX SysPortErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for the err port of the device."
INDEX { sysPortErrPortIndex }
::= { sysPortErrTable 1 }
SysPortErrEntry ::=
SEQUENCE {
sysPortErrPortIndex
INTEGER,
sysPortErrPortState
INTEGER,
sysPortErrPortStatus
INTEGER,
sysPortErrPortReason
INTEGER
}
sysPortErrPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the module's port number.(1..Max port number in
the module)"
::= { sysPortErrEntry 1 }
sysPortErrPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the port state is enabled or disabled."
::= { sysPortErrEntry 2 }
sysPortErrPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
err-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the PortStatus is err-disabled."
::= { sysPortErrEntry 3 }
sysPortErrPortReason OBJECT-TYPE
SYNTAX INTEGER {
lbd(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object decides whether the PortStatus is LBD."
::= { sysPortErrEntry 4 }
-- end DLINK-METRO-LIKE-GENERAL
sysDhcpAutoConfiguration OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates auto config is enabled or disabled."
DEFVAL { disable }
::= { companySystem 16 }
-- start DLINK-METRO-LIKE-GENERAL
sysWebState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for Enabled(1) or Disabled(2) Web state in the system."
::= { companySystem 17 }
sysWebPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Web Server Port Number."
DEFVAL { 80 }
::= { companySystem 18 }
sysARPAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for ARP aging time."
::= { companySystem 19 }
sysMACAgingTime OBJECT-TYPE
SYNTAX INTEGER (10..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for MAC aging time."
::= { companySystem 20 }
telnetsettingManagementOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable management Telnetsetting mechanism."
::= { companySystem 23 }
telnetUDPPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting telnet's UDP Port."
DEFVAL { 23 }
::= { companySystem 24 }
autoRefreshConfiguration OBJECT-TYPE
SYNTAX INTEGER {
refreshimenever(0),
refreshtime10secs(1),
refreshtime30secs(2),
refreshtime1min(3),
refreshtime5mins(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set the WEB panel auto refresh timer."
::= { companySystem 25 }
-- end DLINK-METRO-LIKE-GENERAL
-- -------------------------------------------------------------------------
-- companyIpifGroup
-- -------------------------------------------------------------------------
sysIpAddrCfgMode OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the means by which the default interface in the device
gets the IP address.
If 'manual' mode is selected, the default interface takes the
'sysDefaultIpAddr' configured in the system.
If 'dynamic' mode is selected, the default interface gets the IP address
through dynamic IP address configuration protocols such as RARP client,
BootP client, DHCP Client, etc.
If the system fails to get the IP address dynamically through all the
above protocols, the default interface uses the 'sysDefaultIpAddr'
configured in the system."
DEFVAL { manual }
::= { companyIpifGroup 1 }
sysIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default IP Address of the system.
This IP address, if modified, will take effect only when the
configuration is stored & restored."
::= { companyIpifGroup 2 }
sysIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP subnet mask for the default IP address.
This subnet mask, if modified, will take effect only when the
configuration is stored & restored."
::= { companyIpifGroup 3 }
sysGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway"
::= { companyIpifGroup 4 }
dhcpOption12Status OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of DHCP Option12"
::= { companyIpifGroup 5 }
dhcpOption12HostName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Host name in DHCP option 12"
::= { companyIpifGroup 6 }
-- -------------------------------------------------------------------------
-- companyTftpGroup
-- -------------------------------------------------------------------------
tftpFwServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server's IP address is used to upload or
download firmware."
::= { companyTftpGroup 1 }
tftpFwImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure firmware filename to download."
::= { companyTftpGroup 2 }
tftpFwTftpOperation OBJECT-TYPE
SYNTAX INTEGER {
none(0),
download(1),
upload(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tftp operates to perform downloading the firmware image
to the unit. This object is used in conjunction with
configBootTftpServerIp and configBootImageFileName."
::= { companyTftpGroup 3 }
tftpFwTftpOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
progressing(3),
transmit(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tftp operation status represent firmware backup or upgrade status."
::= { companyTftpGroup 4 }
tftpCfgServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server's IP address is used to upload or
download configuration file."
::= { companyTftpGroup 5 }
tftpConfigFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration filename is used to store or retrieve config
from the tftp server."
::= { companyTftpGroup 6 }
tftpConfigTftpOperation OBJECT-TYPE
SYNTAX INTEGER {
download(1),
upload(2),
progressing(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tftp operates to perform either downloading the
configuration file to the unit or uploading the current
configuration file to the tftp server. This object is
used in conjunction with configTftpServerIpAddress
and configTftpServerFileName."
::= { companyTftpGroup 7 }
tftpConfigTftpOperationStatus OBJECT-TYPE
SYNTAX INTEGER {
none(0),
success(1),
fail(2),
progressing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tftp operation status represent configuration file backup or restore status."
::= { companyTftpGroup 8 }
-- -------------------------------------------------------------------------
-- company Extension MIB, Miscellaneous Information
-- -------------------------------------------------------------------------
miscReset OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
noop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Physically resets the unit - use with care. A (1) resets
the unit, a (2) does nothing."
::= { companyMiscGroup 2 }
miscStatisticsReset OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
noop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Resets the units statistics. A (1) resets
the statistics count, a (2) does nothing."
::= { companyMiscGroup 3 }
-- ----------------------------------------------------------------
-- The STP Bridge Global
-- ----------------------------------------------------------------
stpBridgeGlobal OBJECT IDENTIFIER ::= { companySTP 1 }
stpModuleStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { stpBridgeGlobal 1 }
stpProtocolVersion OBJECT-TYPE
SYNTAX INTEGER {
stp(0),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s."
DEFVAL { mstp }
::= { stpBridgeGlobal 2 }
stpBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { stpBridgeGlobal 3 }
stpTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
DEFVAL { 3 }
::= { stpBridgeGlobal 4 }
stpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {2000}
::= { stpBridgeGlobal 5 }
stpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second."
::= { stpBridgeGlobal 6 }
stpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {1500}
::= { stpBridgeGlobal 7 }
stpFowardBPDU OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling forward BPDU."
::= {stpBridgeGlobal 8 }
stpRootBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { stpBridgeGlobal 9 }
stpRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Root as seen
from this bridge."
::= { stpBridgeGlobal 10 }
stpMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
::= { stpBridgeGlobal 11 }
stpForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state."
::= { stpBridgeGlobal 12 }
stpRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge."
::= { stpBridgeGlobal 13 }
-- -------------------------------------
-- The Spanning Tree Port Table
-- -------------------------------------
stpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains port-specific information
for the Spanning Tree Protocol."
::= { companySTP 2 }
stpPortEntry OBJECT-TYPE
SYNTAX StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that
port."
INDEX { stpPort }
::= { stpPortTable 1 }
StpPortEntry ::=
SEQUENCE {
stpPort
INTEGER,
stpPortStatus
INTEGER,
stpPortPriority
INTEGER,
stpAdminPortPathCost
INTEGER,
stpPortPathCost
INTEGER,
stpPortProtocolMigration
TruthValue,
stpPortEdge
INTEGER,
stpPortAdminP2P
INTEGER,
stpPortRestrictedRole
TruthValue,
stpPortRestrictedTCN
TruthValue,
stpPortHelloTime
Timeout,
stpPortState
INTEGER,
stpPortFowardBPDU
INTEGER
}
stpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { stpPortEntry 1 }
stpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts"
::= { stpPortEntry 2 }
stpPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { stpPortEntry 3 }
stpAdminPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. Writing a value of '0' assigns the
automatically calculated default Path Cost value to
the ohter object stpPortPathCost. If the default
Path Cost is being used,this object returns '0' when
read."
REFERENCE
"IEEE 802.1D-2004"
::= { stpPortEntry 4 }
stpPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the CIST Root which include this port."
::= { stpPortEntry 5 }
stpPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Protocol migration state of this Port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs without instance information.
Any other operation on this object has no effect and
it always returns FALSE(2) when read."
::= { stpPortEntry 6 }
stpPortEdge OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(0),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This parameter when TRUE(1) indicates that detection of a port
as Edge Port happens automatically and FALSE(2)
indicates that this feature is disabled."
::= { stpPortEntry 7 }
stpPortAdminP2P OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { stpPortEntry 8 }
stpPortRestrictedRole OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Port after the Root Port has been selected. This
parameter should be FALSE by default. If set it can cause lack of
spanning tree connectivity. It is set by a network administrator to
prevent bridges external to a core region of the network influencing
the spanning tree active topology, possibly because those bridges are
not under the full control of the administrator.
This administrator configuration is also known as 'Root Guard'."
::= {stpPortEntry 9}
stpPortRestrictedTCN OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause temporary loss of connectivity after changes in
a spanning trees active topology as a result of persistent
incorrectly learnt station location information. It is set by a
network administrator to prevent bridges external to a core region of
the network causing address flushing in that region, possibly because
those bridges are not under the full control of the administrator or
MAC-Operational for the attached LANs transitions frequently."
::= {stpPortEntry 10}
stpPortHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second."
::= { stpPortEntry 11 }
stpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { stpPortEntry 12 }
stpPortFowardBPDU OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling forward BPDU."
REFERENCE
"IEEE 802.1D-2004"
::= { stpPortEntry 13 }
-- ----------------------------------------------------------------
-- The MST Configuration Identification
-- ----------------------------------------------------------------
mstConfigurationIdentification OBJECT IDENTIFIER ::= { companySTP 3 }
mstiConfigurationName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address."
::= { mstConfigurationIdentification 1 }
mstiRevisionLevel OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstConfigurationIdentification 2 }
-- -----------------------------------------------------------------
-- Future Mst VlanId to Instance Mapping Table : CIST
-- -----------------------------------------------------------------
mstCistVlanMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'."
::= { mstConfigurationIdentification 3 }
mstCistVlanMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstConfigurationIdentification 4 }
mstCistVlanMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstConfigurationIdentification 5 }
mstCistVlanMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstConfigurationIdentification 6 }
-- -----------------------------------------------------------------
-- Future Mst VlanId to Instance Mapping Table : MSTI
-- -----------------------------------------------------------------
mstVlanMstiMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstVlanMstiMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each instance of MSTP.
This table maintains context ID as one more index to
support Multiple Instances."
::= { mstConfigurationIdentification 7 }
mstVlanMstiMappingEntry OBJECT-TYPE
SYNTAX MstVlanMstiMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceIndex }
::= { mstVlanMstiMappingTable 1 }
MstVlanMstiMappingEntry ::=
SEQUENCE {
mstInstanceIndex
Integer32,
mstSetVlanList
OCTET STRING,
mstResetVlanList
OCTET STRING,
mstInstanceVlanMapped
OCTET STRING,
mstInstanceVlanMapped2k
OCTET STRING,
mstInstanceVlanMapped3k
OCTET STRING,
mstInstanceVlanMapped4k
OCTET STRING
}
mstInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance."
::= { mstVlanMstiMappingEntry 1 }
mstSetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values."
::= { mstVlanMstiMappingEntry 2 }
mstResetVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values."
::= { mstVlanMstiMappingEntry 3 }
mstInstanceVlanMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'."
::= { mstVlanMstiMappingEntry 4 }
mstInstanceVlanMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 5 }
mstInstanceVlanMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 6 }
mstInstanceVlanMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095."
::= { mstVlanMstiMappingEntry 7 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
stpInstance OBJECT IDENTIFIER ::= { companySTP 4 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table : CIST
-- -----------------------------------------------------------------
mstCistBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { stpInstance 1 }
mstCistStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { stpInstance 2 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table : MSTI
-- -----------------------------------------------------------------
mstMstiBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Bridge Information specific to Spanning
Tree Instance. This table maintains context ID as one
more index to support Multiple Instances."
::= { stpInstance 3 }
mstMstiBridgeEntry OBJECT-TYPE
SYNTAX MstMstiBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the Bridge Information."
INDEX { mstMstiInstanceIndex }
::= { mstMstiBridgeTable 1 }
MstMstiBridgeEntry ::=
SEQUENCE {
mstMstiInstanceIndex
Integer32,
mstMstiBridgePriority
Integer32,
mstMstiStatus
INTEGER
}
mstMstiInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spanning Tree Instance to which the information belongs."
::= { mstMstiBridgeEntry 1 }
mstMstiBridgePriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096."
DEFVAL {32768}
::= { mstMstiBridgeEntry 2 }
mstMstiStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { mstMstiBridgeEntry 3 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Bridge Table
-- -----------------------------------------------------------------
stpInstancePortTable OBJECT IDENTIFIER ::= { companySTP 5 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table : CIST
-- -----------------------------------------------------------------
mstCistPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Common Spanning Tree Port
Information."
::= { stpInstancePortTable 1 }
mstCistPortEntry OBJECT-TYPE
SYNTAX MstCistPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for
Common Spanning tree."
INDEX { mstCistPort }
::= { mstCistPortTable 1 }
MstCistPortEntry ::=
SEQUENCE {
mstCistPort
Integer32,
mstCistPortDesignatedBridge
BridgeId,
mstCistPortAdminPathCost
Integer32,
mstCistPortPathCost
Integer32,
mstCistPortPriority
Integer32,
mstCistForcePortState
INTEGER,
mstCistCurrentPortRole
INTEGER
}
mstCistPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { mstCistPortEntry 1 }
mstCistPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { mstCistPortEntry 2 }
mstCistPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstCistPortEntry 3 }
mstCistPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstCistPortEntry 4 }
mstCistPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { mstCistPortEntry 5 }
mstCistForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'fsMIMstCistForcePortState' is set to 'enabled' for this port"
::= { mstCistPortEntry 6 }
mstCistCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { mstCistPortEntry 7 }
-- -----------------------------------------------------------------
-- Mst Multiple Spanning Tree Instance Port Table : MSTI
-- -----------------------------------------------------------------
mstMstiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Spanning Tree Instance Specific Port
Information."
::= { stpInstancePortTable 2 }
mstMstiPortEntry OBJECT-TYPE
SYNTAX MstMstiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every port for each
and every spanning tree instance."
INDEX { mstMstiPort, mstInstanceIndex }
::= { mstMstiPortTable 1 }
MstMstiPortEntry ::=
SEQUENCE {
mstMstiPort
Integer32,
mstMstiPortDesignatedBridge
BridgeId,
mstMstiPortAdminPathCost
Integer32,
mstMstiPortPathCost
Integer32,
mstMstiPortPriority
Integer32,
mstMstiForcePortState
INTEGER,
mstMstiCurrentPortRole
INTEGER
}
mstMstiPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port number of the port for which this entry contains
spanning tree information."
::= { mstMstiPortEntry 1 }
mstMstiPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { mstMstiPortEntry 2 }
mstMstiPortAdminPathCost OBJECT-TYPE
SYNTAX Integer32 (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstMstiPortEntry 3 }
mstMstiPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the MSTI Root which include this port."
::= { mstMstiPortEntry 4 }
mstMstiPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16."
DEFVAL {128}
::= { mstMstiPortEntry 5 }
mstMstiForcePortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'fsMIMstCistForcePortState' is set to 'enabled' for this port"
::= { mstMstiPortEntry 6 }
mstMstiCurrentPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
alternate(1),
backup(2),
root(3),
designated(4),
master(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Port Role of the port for this spanning
tree instance."
::= { mstMstiPortEntry 7 }
-- ------------------------------------------------------------------
-- The Static Multicast Group
-- ------------------------------------------------------------------
staticMcastTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticMcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Static MACs"
::= { companyStaticMcast 1 }
staticMcastEntry OBJECT-TYPE
SYNTAX StaticMcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Static MAC entry containing the mac and forwarding port."
INDEX { staticMcastVlanID, staticMcastMac, staticMcastEgressPorts}
::= { staticMcastTable 1 }
StaticMcastEntry ::= SEQUENCE {
staticMcastVlanID INTEGER,
staticMcastMac MacAddress,
staticMcastEgressPorts PortList,
staticMcastStatus RowStatus
}
staticMcastVlanID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the static MAC entry."
::= { staticMcastEntry 1 }
staticMcastMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the static MAC entry."
::= { staticMcastEntry 2 }
staticMcastEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not
be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
::= { staticMcastEntry 3 }
staticMcastStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the Static Mcast Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available."
::= { staticMcastEntry 4 }
-- ----------------------------------------------------------
-- The 802.1Q VLAN Groups
-- ----------------------------------------------------------
dot1qVlanManagementOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable management VLAN mechanism."
::= { companyDot1qVlanGroup 2 }
dot1qVlanManagementid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management VLAN ID, which will allow to forward packets of that VLAN to CPU."
DEFVAL { 1 }
::= { companyDot1qVlanGroup 3 }
dot1qVlanAsyOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1Q Asymmetric VLAN"
::= { companyDot1qVlanGroup 5 }
-- -------------------------------------------------------------
-- The VLAN Database
-- -------------------------------------------------------------
dot1qVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { companyDot1qVlanGroup 6 }
dot1qVlanEntry OBJECT-TYPE
SYNTAX Dot1qVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a VLAN configured into the
device by (local or network) management."
INDEX { dot1qVlanName }
::= { dot1qVlanTable 1 }
Dot1qVlanEntry ::=
SEQUENCE {
dot1qVlanName
SnmpAdminString,
dot1qVlanEgressPorts
PortList,
dot1qVlanForbiddenPorts
PortList,
dot1qVlanUntaggedPorts
PortList,
dot1qVlanAdvertisementStatus
INTEGER,
dot1qVlanRowStatus
RowStatus
}
dot1qVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the VLAN."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { dot1qVlanEntry 1 }
dot1qVlanEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in dot1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
::= { dot1qVlanEntry 2 }
dot1qVlanForbiddenPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are prohibited by management
from being included in the egress list for this VLAN.
Changes to this object that cause a port to be included
or excluded affect the per-port per-VLAN Registrar
control for Registration Forbidden for the relevant GVRP
state machine on each port. A port may not be added in
this set if it is already a member of the set of ports
in dot1qVlanEgressPorts. The default value of
this object is a string of zeros of appropriate length,
excluding all ports from the forbidden set."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
::= { dot1qVlanEntry 3 }
dot1qVlanUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { dot1qVlanEntry 4 }
dot1qVlanAdvertisementStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN."
::= { dot1qVlanEntry 5 }
dot1qVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row in dot1qVlanTable. By setting this object, new
entries can be created in dot1qVlanTable and existing entries can be
removed from dot1qVlanTable. It can be used as specified in the SNMP
v2 standard."
::= { dot1qVlanEntry 6 }
-- -------------------------------------------------------------
-- The VLAN Ungister Multicast Filter Table
-- -------------------------------------------------------------
dot1qVlanUngisterMCFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qVlanUngisterMCFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports through which
a router, in a particular VLAN is reachable."
::= { companyDot1qVlanGroup 8 }
dot1qVlanUngisterMCFilterEntry OBJECT-TYPE
SYNTAX Dot1qVlanUngisterMCFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of multicast filter mode information for each VLAN ID."
INDEX { dot1qVlanUngisterMCFilterVlanId }
::= { dot1qVlanUngisterMCFilterTable 1 }
Dot1qVlanUngisterMCFilterEntry ::= SEQUENCE {
dot1qVlanUngisterMCFilterVlanId Integer32,
dot1qVlanUngisterMCFiltermode INTEGER
}
dot1qVlanUngisterMCFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Per Vlan to configure multicast filtering function."
::= { dot1qVlanUngisterMCFilterEntry 1 }
dot1qVlanUngisterMCFiltermode OBJECT-TYPE
SYNTAX INTEGER { filter(1), forward(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter unknown multicast frames or normal operation(i.e. forwarding)"
::= { dot1qVlanUngisterMCFilterEntry 2 }
-- ----------------------------------------------------------
-- The GVRP Groups
-- ----------------------------------------------------------
gvrpGVRPGlobalSettingsOnOff OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable GVRP mechanism."
::= { companyGVRPGroup 1 }
gvrpSettingsJoinTime OBJECT-TYPE
SYNTAX INTEGER (100..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Join Time value assigned to this Join Time field.
This 16-bit value is read-write."
::= { companyGVRPGroup 2 }
gvrpSettingsLeaveTime OBJECT-TYPE
SYNTAX INTEGER (100..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Leave Time value assigned to this Leave Time field.
This 16-bit value is read-write."
::= { companyGVRPGroup 3 }
gvrpSettingsLeaveAllTime OBJECT-TYPE
SYNTAX INTEGER (100..100000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Leave-All Time value assigned to this Leave-All Time field.
This 16-bit value is read-write."
::= { companyGVRPGroup 4 }
-- GRVP Port Setting Table
--
gvrpSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GvrpSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each GVRP configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset."
::= { companyGVRPGroup 5 }
gvrpSettingsEntry OBJECT-TYPE
SYNTAX GvrpSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a GVRP configured into the
device by (local or network) management."
INDEX { gvrpSettingsPortControlIndex }
::= { gvrpSettingsTable 1 }
GvrpSettingsEntry ::=
SEQUENCE {
gvrpSettingsPortControlIndex
InterfaceIndex,
gvrpSettingsPVID
INTEGER,
gvrpSettingsGVRPState
INTEGER,
gvrpSettingsIngressChecking
INTEGER,
gvrpSettingsAcceptableFrameType
INTEGER
}
gvrpSettingsPortControlIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port."
::= { gvrpSettingsEntry 1 }
gvrpSettingsPVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PVID value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { gvrpSettingsEntry 2 }
gvrpSettingsGVRPState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable GVRP State to this Aggregation Port."
::= { gvrpSettingsEntry 3 }
gvrpSettingsIngressChecking OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Ingress Checking mechanism of GVRP to this Aggregation Port."
::= { gvrpSettingsEntry 4 }
gvrpSettingsAcceptableFrameType OBJECT-TYPE
SYNTAX INTEGER {
allFrames(1),
taggedOnly(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chose types All Frames/Tagged to this Aggregation Port."
::= { gvrpSettingsEntry 5 }
-- ----------------------------------------------------------
-- The DHCP/BOOTP Relay
-- ----------------------------------------------------------
-- The DHCP/BOOTP Relay Control
dhcpBOOTPRelayState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay function is enabled or disabled."
::= { dhcpBOOTPRelayControl 1 }
dhcpBOOTPRelayHopCount OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of router hops that the BOOTP packets can cross."
::= { dhcpBOOTPRelayControl 2 }
dhcpBOOTPRelayTimeThreshold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the minimum time in seconds within which the switch must relay the DHCP request.
If this time is exceeded, the switch will drop the DHCP packet."
::= { dhcpBOOTPRelayControl 3 }
-- The DHCP/BOOTP Relay Management
-- The DHCP/BOOTP Relay Interface Settings Table
dhcpBOOTPRelayInterfaceSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPBOOTPRelayInterfaceSettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates the IP address as a destination to forward (relay) DHCP packets to."
::= { dhcpBOOTPRelayManagement 1 }
dhcpBOOTPRelayInterfaceSettingsEntry OBJECT-TYPE
SYNTAX DHCPBOOTPRelayInterfaceSettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information indicates the IP address as a destination to forward (relay) DHCP packets to."
INDEX { dhcpBOOTPRelayInterface, dhcpBOOTPRelayServerIP}
::= { dhcpBOOTPRelayInterfaceSettingsTable 1 }
DHCPBOOTPRelayInterfaceSettings ::=
SEQUENCE {
dhcpBOOTPRelayInterface
DisplayString,
dhcpBOOTPRelayServerIP
IpAddress,
dhcpBOOTPRelayInterfaceSettingsRowStatus
RowStatus
}
dhcpBOOTPRelayInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the IP interface."
::= { dhcpBOOTPRelayInterfaceSettingsEntry 1 }
dhcpBOOTPRelayServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the DHCP server IP address."
::= { dhcpBOOTPRelayInterfaceSettingsEntry 2 }
dhcpBOOTPRelayInterfaceSettingsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { dhcpBOOTPRelayInterfaceSettingsEntry 3 }
-- The DHCP/BOOTP Relay Management
-- The DHCP/BOOTP Relay Option82
dhcpBOOTPRelayOption82State OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay option 82 function is enabled or disabled."
::= { dhcpBOOTPRelayManagementOption82 1 }
dhcpBOOTPRelayOption82CheckState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay option 82 Check function is enabled or disabled."
::= { dhcpBOOTPRelayManagementOption82 2 }
dhcpBOOTPRelayOption82Policy OBJECT-TYPE
SYNTAX INTEGER {
replace(1),
drop(2),
keep(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP relay option 82 policy."
::= { dhcpBOOTPRelayManagementOption82 3 }
dhcpBOOTPRelayOption82RemoteIDType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
userdefined(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of remote ID.
If the type is default, the remote ID will be the MAC address of the device, otherwise,
the remote ID can be defined by writing to the swDHCPRelayOption82RemoteID object."
::= { dhcpBOOTPRelayManagementOption82 4 }
dhcpBOOTPRelayOption82RemoteID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object displays the current remote ID of the device.
If swDHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device,
and this object cannot be modified.
If swDHCPRelayOption82RemoteIDType is set to user-defined, a new value can be written to this object."
::= { dhcpBOOTPRelayManagementOption82 5 }
-- ----------------------------------------------------------
-- The DHCP LocalRelay
-- ----------------------------------------------------------
-- The DHCP Local Relay Table
dhcpLocalRelayGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP local relay function of VLAN is enabled or disabled."
::= { companyDHCPLocalRelay 1 }
dhcpLocalRelayTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPLocalRelaySettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table indicates the IP address as a destination to forward (local relay) DHCP packets to."
::= { companyDHCPLocalRelay 2 }
dhcpLocalRelayTableEntry OBJECT-TYPE
SYNTAX DHCPLocalRelaySettings
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information indicates the IP address as a destination to forward (local relay) DHCP packets to."
INDEX { dhcpLocalRelaySettingsVLANID }
::= { dhcpLocalRelayTable 1 }
DHCPLocalRelaySettings ::=
SEQUENCE {
dhcpLocalRelaySettingsVLANID
INTEGER,
dhcpLocalRelaySettingsState
INTEGER
}
dhcpLocalRelaySettingsVLANID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the current VLAN ID of the device."
::= { dhcpLocalRelayTableEntry 1 }
dhcpLocalRelaySettingsState OBJECT-TYPE
SYNTAX INTEGER {
enabled(3),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates DHCP local relay function of VLAN is enabled or disabled."
::= { dhcpLocalRelayTableEntry 2 }
-- ---------------------------------------------------------------------
-- LA Function
-- ---------------------------------------------------------------------
laSystem OBJECT IDENTIFIER ::= { companyLA 1 }
laPortControl OBJECT IDENTIFIER ::= { companyLA 2 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
PortLaMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines how a Port Channel does channeling.
lacp(1) - place the port into passive
negotiation state, in which the
port waits for its peer to
initiate negotiation.
static(2) - force the port to enable
channeling.
disable(3) - channeling is disabled."
SYNTAX INTEGER {
lacp(1),
static(2),
disable(3)
}
LacpKey ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Actor or Partner Key value (0..65535)."
SYNTAX Integer32 (0..65535)
-- ------------------------------------------------------------------
-- The La System Group
-- ------------------------------------------------------------------
laStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Link Aggregation Module administrative status as
enabled or disabled."
::= { laSystem 2 }
--
-- Port Channel Table
--
laPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel."
::= { laSystem 3 }
laPortChannelEntry OBJECT-TYPE
SYNTAX LaPortChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
port-channel port."
INDEX { laPortChannelIfIndex }
::= { laPortChannelTable 1 }
LaPortChannelEntry ::=
SEQUENCE {
laPortChannelIfIndex InterfaceIndex,
laPortChannelMemberList PortList,
laPortChannelMode PortLaMode
-- start CAMEO-LA-MASTER-PORT-WANTED
,
laPortChannelMasterPort InterfaceIndex
-- end CAMEO-LA-MASTER-PORT-WANTED
}
laPortChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port-channel(Aggregator's
interface index). "
::= { laPortChannelEntry 1 }
laPortChannelMemberList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Member Port list of the port channel. Add the ports as a
aggregation member associated of a port-channel."
::= { laPortChannelEntry 2 }
laPortChannelMode OBJECT-TYPE
SYNTAX PortLaMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current Operating Channel Mode of the port channel
Lacp(1) - forcing the port to negotiate with the
partner.
manual(2) - force the port to enable channeling (Manual).
disable(3) - channeling is disabled."
::= { laPortChannelEntry 3 }
-- start CAMEO-LA-MASTER-PORT-WANTED
laPortChannelMasterPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master port of the port-channel. "
::= { laPortChannelEntry 4 }
-- end CAMEO-LA-MASTER-PORT-WANTED
-- ------------------------------------------------------------------
-- The La Algorithm Group
-- ------------------------------------------------------------------
laAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
sourceMAC(1),
destMAC(2),
sourceAndDestMAC(3),
sourceIP(4),
destIP(5),
sourceAndDestIP(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the Link Aggregation load balance algorithm."
::= { laSystem 4 }
--
-- LA Port Control Table
--
laPortControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaPortControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port."
::= { laPortControl 1 }
laPortControlEntry OBJECT-TYPE
SYNTAX LaPortControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device."
INDEX { laPortControlIndex }
::= { laPortControlTable 1 }
LaPortControlEntry ::=
SEQUENCE {
laPortControlIndex
InterfaceIndex,
laPortActorPortPriority
INTEGER,
laPortActorActivity
INTEGER,
laPortActorTimeout
INTEGER
}
laPortControlIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port."
::= { laPortControlEntry 1 }
laPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { laPortControlEntry 2 }
laPortActorActivity OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates LACP-Activity to this Aggregation Port.
LACP can be configured in one of two modes: active or passive.
In active mode it will always send frames along the configured links.
If the actor and partner are both in passive mode, they do not
exchange LACP packets."
::= { laPortControlEntry 3 }
laPortActorTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates LACP-Timeout to this Aggregation Port.
short(1) - LACP Timeout 3 seconds.
long (2) - LACP Timeout 90 seconds."
::= { laPortControlEntry 4 }
-- ----------------------------------------------------------------
-- The STATIC MAC group
-- ----------------------------------------------------------------
staticDisableAutoLearn OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set on to disable Auto Learning Excluding Uplink Port and
set off to enable Auto Learning."
::= { companyStaticMAC 1 }
staticAutoLearningList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of the device's member ports that belong
to the Static MAC auto learning enable/disable.
For example, when Disable Auto Learning is enable,
the octet value set up as '# 0x0F 0xFF 0xFF 0xFF' means
from port 1 to port 4 are not in auto learning state,
the other ports are in auto learning state. It can be
set up when Disable Auto Learning is enable."
::= { companyStaticMAC 2 }
staticTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Static MACs"
::= { companyStaticMAC 3 }
staticEntry OBJECT-TYPE
SYNTAX StaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Static MAC entry containing the mac and forwarding port."
INDEX { staticVlanID, staticMac,staticPort}
::= { staticTable 1 }
StaticEntry ::= SEQUENCE {
staticVlanID INTEGER,
staticMac MacAddress,
staticPort INTEGER,
staticStatus RowStatus
}
staticVlanID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the static MAC entry."
::= { staticEntry 1 }
staticMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the static MAC entry."
::= { staticEntry 2 }
staticPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forwarding port of the static MAC entry."
::= { staticEntry 3 }
staticStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of an entry in the Static MAC Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available. The trunk member port can not set up static MAC."
::= { staticEntry 4 }
-- ---------------------------------------------------------------------
-- IGMP Snooping Function
-- ---------------------------------------------------------------------
igsSystem OBJECT IDENTIFIER ::= { companyIgsGroup 1 }
igsVlan OBJECT IDENTIFIER ::= { companyIgsGroup 3 }
igsAccessAuth OBJECT IDENTIFIER ::= { companyIgsGroup 5 }
igsStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module starts
protocol operations.
When set to 'disabled', the IGS module stops performing
protocol operations."
DEFVAL { 2 }
::= { igsSystem 1 }
igsRouterPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted."
DEFVAL { 260 }
::= { igsSystem 2 }
igsHostPortPurgeInterval OBJECT-TYPE
SYNTAX Integer32 (130..153025)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group."
DEFVAL {260}
::= { igsSystem 3 }
igsRobustnessValue OBJECT-TYPE
SYNTAX Integer32 (2..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number of queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'igsRobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group."
DEFVAL { 2 }
::= { igsSystem 4 }
igsGrpQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there is any intersted receivers. The switch will send
'igsRobustnessValue' queries before removing the port from the
group membership information in the forwarding database."
DEFVAL { 1 }
::= { igsSystem 5 }
igsQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
VLANs."
DEFVAL { 125 }
::= { igsSystem 6 }
igsQueryMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (10..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time advertised in IGMPv2 general
queries on this interface."
DEFVAL { 10 }
::= { igsSystem 7 }
-- VLAN Based MAC Multicast Forwarding Table
--
-- igsVlanMcastMacFwdTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF IgsVlanMcastMacFwdEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table contains MAC based multicast forwarding
-- information. This information is applicable only if
-- the 'igsVlanMcastForwardingMode' is set to 'macbased' "
-- ::= { igsVlan 1 }
--
-- igsVlanMcastMacFwdEntry OBJECT-TYPE
-- SYNTAX IgsVlanMcastMacFwdEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "This table contains VLAN ID, multicast group MAC address and the
-- list of ports onto which the multicast data packets for group
-- should be forwarded."
--
-- INDEX { igsVlanMcastMacFwdVlanId,
-- igsVlanMcastMacFwdGroupAddress }
-- ::= { igsVlanMcastMacFwdTable 1 }
--
-- IgsVlanMcastMacFwdEntry ::= SEQUENCE {
-- igsVlanMcastMacFwdVlanId Integer32,
-- igsVlanMcastMacFwdGroupAddress MacAddress,
-- igsVlanMcastMacFwdPortList PortList
-- }
--
-- igsVlanMcastMacFwdVlanId OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "VLAN ID pertaining to the Multicast forwarding entry"
-- ::= { igsVlanMcastMacFwdEntry 1 }
--
-- igsVlanMcastMacFwdGroupAddress OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Multicast group MAC address."
-- ::= { igsVlanMcastMacFwdEntry 2 }
--
--
-- igsVlanMcastMacFwdPortList OBJECT-TYPE
-- SYNTAX PortList
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "List of ports onto which the multicast data
-- packets destined for this group will be forwarded."
-- ::= { igsVlanMcastMacFwdEntry 3 }
-- VLAN based router table.
igsVlanRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of ports through which
a router, in a particular VLAN is reachable."
::= { igsVlan 3 }
igsVlanRouterEntry OBJECT-TYPE
SYNTAX IgsVlanRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains the VLAN ID and list of ports on which
routers are present in the VLAN."
INDEX { igsVlanRouterVlanId }
::= { igsVlanRouterTable 1 }
IgsVlanRouterEntry ::= SEQUENCE {
igsVlanRouterVlanId Integer32,
igsVlanRouterPortList PortList
}
igsVlanRouterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of the ports through which router is reachable."
::= { igsVlanRouterEntry 1 }
igsVlanRouterPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically."
::= { igsVlanRouterEntry 2 }
-- VLAN based filter table
igsVlanFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system."
::= { igsVlan 4 }
igsVlanFilterEntry OBJECT-TYPE
SYNTAX IgsVlanFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains snooping status , version and fast leave
configuration for a specific VLAN."
INDEX { igsVlanFilterVlanId }
::= { igsVlanFilterTable 1 }
IgsVlanFilterEntry ::= SEQUENCE {
igsVlanFilterVlanId Integer32,
igsVlanSnoopStatus INTEGER,
igsVlanQuerier INTEGER,
igsVlanCfgQuerier INTEGER,
igsVlanQueryInterval Integer32,
igsVlanRtrPortList PortList,
igsVlanFbdRtrPortList PortList,
igsVlanFastLeave INTEGER
}
igsVlanFilterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in IgsVlanFilterEntry is to be done."
::= { igsVlanFilterEntry 1 }
igsVlanSnoopStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows you to enable/disable IGS function on a specific VLAN."
DEFVAL { 1 }
::= { igsVlanFilterEntry 2 }
igsVlanQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is configured as a querier in the VLAN"
DEFVAL { 2 }
::= { igsVlanFilterEntry 3 }
igsVlanCfgQuerier OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries."
DEFVAL { 2 }
::= { igsVlanFilterEntry 4 }
igsVlanQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network."
DEFVAL { 125 }
::= { igsVlanFilterEntry 5 }
igsVlanRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which are configured statically as router ports"
::= { igsVlanFilterEntry 6 }
igsVlanFbdRtrPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports which can be configured statically as forbidden router ports."
::= { igsVlanFilterEntry 7 }
igsVlanFastLeave OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table."
DEFVAL { 2 }
::= { igsVlanFilterEntry 8 }
-- VLAN Based IGMP Snooping Group
igsVlanMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MAC based multicast forwarding
information."
::= { igsVlan 5 }
igsVlanMulticastGroupEntry OBJECT-TYPE
SYNTAX IgsVlanMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded."
INDEX { igsVlanMulticastGroupVlanId,
igsVlanMulticastGroupIpAddress }
::= { igsVlanMulticastGroupTable 1 }
IgsVlanMulticastGroupEntry ::= SEQUENCE {
igsVlanMulticastGroupVlanId Integer32,
igsVlanMulticastGroupIpAddress InetAddress,
igsVlanMulticastGroupMacAddress MacAddress,
igsVlanMulticastGroupPortList PortList
}
igsVlanMulticastGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID pertaining to the Multicast forwarding entry"
::= { igsVlanMulticastGroupEntry 1 }
igsVlanMulticastGroupIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format."
::= { igsVlanMulticastGroupEntry 2 }
igsVlanMulticastGroupMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format."
::= { igsVlanMulticastGroupEntry 3 }
igsVlanMulticastGroupPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of ports onto which the multicast data
packets destined for this group will be forwarded."
::= { igsVlanMulticastGroupEntry 4 }
igsAccessAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgsAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the IGMP Authentication
function of the switch."
::= { igsAccessAuth 1 }
igsAccessAuthEntry OBJECT-TYPE
SYNTAX IgsAccessAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains management entities for IGMP Authentication
function."
INDEX { igsAccessAuthPortIndex }
::= { igsAccessAuthTable 1 }
IgsAccessAuthEntry ::= SEQUENCE {
igsAccessAuthPortIndex Integer32,
igsAccessAuthState INTEGER
}
igsAccessAuthPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index of igsAccessAuthTable which
indicates the port to be configured."
::= { igsAccessAuthEntry 1 }
igsAccessAuthState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be configured to set IGMP Authentication
state to enabled/disabled on each port."
::= { igsAccessAuthEntry 2 }
-- -------------------------------------------------------------
-- groups in the Auth MIB
-- -------------------------------------------------------------
swAuthenCtrl OBJECT IDENTIFIER ::= { companyAuthGroup 1 }
-- -----------------------------------------------------------------------------
-- swAuthenCtrl
-- -----------------------------------------------------------------------------
swAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Static 802.1x."
::= { swAuthenCtrl 1 }
swAuthMode OBJECT-TYPE
SYNTAX INTEGER {
portBase(1),
macBase(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the authentication mode of the device."
::= { swAuthenCtrl 2 }
authProtocol OBJECT-TYPE
SYNTAX INTEGER {
authProtocolRadiusEap(1),
authProtocolLocal(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication method used to authenticate users."
DEFVAL { authProtocolRadiusEap }
::= { swAuthenCtrl 3 }
-- -------------------------------------------------------------
-- groups in the Port Access Control MIB
-- -------------------------------------------------------------
swAuthPortAccessCtrl OBJECT IDENTIFIER ::= { companyAuthGroup 2 }
-- -----------------------------------------------------------------------------
-- swAuthPortAccessCtrl
-- -----------------------------------------------------------------------------
swAuthPortAccessControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwAuthPortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { swAuthPortAccessCtrl 1 }
swAuthPortAccessControlEntry OBJECT-TYPE
SYNTAX SwAuthPortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { swAuthAuthConfigPortNumber }
::= { swAuthPortAccessControlTable 1 }
SwAuthPortAccessControlEntry ::= SEQUENCE {
swAuthAuthConfigPortNumber INTEGER,
swAuthAuthQuietPeriod INTEGER,
swAuthAuthSuppTimeout INTEGER,
swAuthAuthServerTimeout INTEGER,
swAuthAuthMaxReq INTEGER,
swAuthAuthTxPeriod INTEGER,
swAuthAuthReAuthPeriod INTEGER,
swAuthAuthReAuthentication INTEGER,
swAuthAuthConfigPortControl INTEGER,
swAuthAuthCapability INTEGER,
swAuthAuthDirection INTEGER
}
swAuthAuthConfigPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each port that correlates to port index.
Its value ranges between 1 and the value of port number."
::= { swAuthPortAccessControlEntry 1 }
swAuthAuthQuietPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the quietPeriod constant
currently in use by the Authenticator PAE state
machine."
REFERENCE
"9.4.1, quietPeriod."
DEFVAL { 60 }
::= { swAuthPortAccessControlEntry 2 }
swAuthAuthSuppTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the suppTimeout constant
currently in use by the Backend Authentication state
machine."
REFERENCE
"9.4.1, suppTimeout."
DEFVAL { 12 }
::= { swAuthPortAccessControlEntry 3 }
swAuthAuthServerTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the serverTimeout constant
currently in use by the Backend Authentication state
machine."
REFERENCE
"9.4.1, serverTimeout."
DEFVAL { 16 }
::= { swAuthPortAccessControlEntry 4 }
swAuthAuthMaxReq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the maxReq constant currently in use by
the Backend Authentication state machine."
REFERENCE
"9.4.1, maxReq."
DEFVAL { 2 }
::= { swAuthPortAccessControlEntry 5 }
swAuthAuthTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the txPeriod constant
currently in use by the Authenticator PAE state
machine."
REFERENCE
"9.4.1, txPeriod."
DEFVAL { 24 }
::= { swAuthPortAccessControlEntry 6 }
swAuthAuthReAuthPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine."
REFERENCE
"9.4.1, reAuthPerio."
DEFVAL { 3600 }
::= { swAuthPortAccessControlEntry 7 }
swAuthAuthReAuthentication OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1)."
REFERENCE
"9.4.1, reAuthEnable."
::= { swAuthPortAccessControlEntry 8 }
swAuthAuthConfigPortControl OBJECT-TYPE
SYNTAX INTEGER {
forceUnauthorized(1),
auto(2),
forceAuthorized(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current value of the controlled Port
control parameter for the Port."
REFERENCE
"9.4.1, AuthControlledPortControl."
::= { swAuthPortAccessControlEntry 9 }
swAuthAuthCapability OBJECT-TYPE
SYNTAX INTEGER {
authenticator(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current value of the controlled Port
control parameter for the Port."
REFERENCE
"AuthCapability."
::= { swAuthPortAccessControlEntry 10 }
swAuthAuthDirection OBJECT-TYPE
SYNTAX INTEGER {
both(0),
in(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current value of the controlled Port
control parameter for the Port."
REFERENCE
"AuthDirection."
::= { swAuthPortAccessControlEntry 11 }
-- -------------------------------------------------------------
-- groups in the 802.1X Local user MIB
-- -------------------------------------------------------------
swAuthUser OBJECT IDENTIFIER ::= { companyAuthGroup 3 }
-- -----------------------------------------------------------------------------
-- swAuthUser
-- -----------------------------------------------------------------------------
swAuthUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwAuthUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { swAuthUser 1 }
swAuthUserEntry OBJECT-TYPE
SYNTAX SwAuthUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { swAuthUserName }
::= { swAuthUserTable 1 }
SwAuthUserEntry ::= SEQUENCE {
swAuthUserName SnmpAdminString,
swAuthUserPassword DisplayString,
swAuthUserStatus RowStatus
}
swAuthUserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index value of a row in this table.
This object is used to set 802.1X Local user name,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { swAuthUserEntry 1 }
swAuthUserPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set 802.1X Local user Password,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { swAuthUserEntry 2 }
swAuthUserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the swAuthUserTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The swAuthUserName objects must be
explicitly set."
::= { swAuthUserEntry 3 }
-- -------------------------------------------------------------
-- groups in the Authentication RADIUS Server MIB
-- -------------------------------------------------------------
swAuthRadiusServer OBJECT IDENTIFIER ::= { companyAuthGroup 4 }
-- -----------------------------------------------------------------------------
-- swAuthRadiusServer
-- -----------------------------------------------------------------------------
swAuthRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwAuthRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself."
::= { swAuthRadiusServer 1 }
swAuthRadiusServerEntry OBJECT-TYPE
SYNTAX SwAuthRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration information for an Authenticator Port."
INDEX { swAuthRadiusServerIndex }
::= { swAuthRadiusServerTable 1 }
SwAuthRadiusServerEntry ::= SEQUENCE {
swAuthRadiusServerIndex INTEGER,
swAuthRadiusServerAddress IpAddress,
swAuthRadiusServerAuthenticationPort INTEGER,
swAuthRadiusServerAccountingPort INTEGER,
swAuthRadiusServerTimeout INTEGER,
swAuthRadiusServerRetransmit INTEGER,
swAuthRadiusServerKey DisplayString,
swAuthRadiusServerStatus RowStatus
}
swAuthRadiusServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for Authentication RADIUS Server index.
Its value ranges between 1 and 3."
::= { swAuthRadiusServerEntry 1 }
swAuthRadiusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the RADIUS server
referred to in this table entry."
::= { swAuthRadiusServerEntry 2 }
swAuthRadiusServerAuthenticationPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 1812 }
::= { swAuthRadiusServerEntry 3 }
swAuthRadiusServerAccountingPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 1813 }
::= { swAuthRadiusServerEntry 4 }
swAuthRadiusServerTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 5 }
::= { swAuthRadiusServerEntry 5 }
swAuthRadiusServerRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
DEFVAL { 2 }
::= { swAuthRadiusServerEntry 6 }
swAuthRadiusServerKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set 802.1X Radius Server Key,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark."
::= { swAuthRadiusServerEntry 7 }
swAuthRadiusServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the
swAuthRadiusServerTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The swAuthRadiusServerIndex objects
must be explicitly set."
::= { swAuthRadiusServerEntry 8 }
-- ------------------------------------------------------------------
-- QoS
-- ------------------------------------------------------------------
--1--
cosScheduleMechanism OBJECT-TYPE
SYNTAX INTEGER {
strictPriority(1),
wrr(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queuing mechanism.
strictPriority(1) : Strict Priority
wrr(2) : Weighted Round Robin
Strict-priority scheduling is implemented with a special strict-priority scheduler node that is stacked directly above the port. Queues stacked on top of the strict-priority scheduler node always get bandwidth before other queues.
Weighted round-robin scheduling is designed to better handle queues with different processing capacities. Each queue has a weight : Low is 1, Medium is 2, High is 4 and Highest is 8 for WS3 spec. Queues with higher weights get bandwidth before than other queues with less weights.
"
::= { companyQoSGroup 1 }
--2--
cosOutputSchedule OBJECT IDENTIFIER ::= { companyQoSGroup 2 }
cosClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF CosClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cosOutputSchedule."
::= { cosOutputSchedule 1 }
cosClassEntry OBJECT-TYPE
SYNTAX CosClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of cosOutputClass Weight."
INDEX { cosClassIndex }
::= { cosClassTable 1 }
CosClassEntry ::= SEQUENCE {
cosClassIndex INTEGER,
cosWeight INTEGER
}
cosClassIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A index of class 0 ~ 3."
::= { cosClassEntry 1 }
cosWeight OBJECT-TYPE
SYNTAX INTEGER (1..55)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"cos weight "
::= { cosClassEntry 2 }
-- ------------------------------------------------------------------
-- QoS
-- ------------------------------------------------------------------
--3 port priority --
portMapPriority OBJECT IDENTIFIER ::= { companyQoSGroup 3 }
portMapPriTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortMapPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port mapping priority Entries."
::= { portMapPriority 1 }
portMapPriEntry OBJECT-TYPE
SYNTAX PortMapPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of 802.1p port mapping priority priorities."
INDEX { portMapPriPortIndex }
::= { portMapPriTable 1 }
PortMapPriEntry ::= SEQUENCE {
portMapPriPortIndex INTEGER,
portMapPriClass INTEGER
}
portMapPriPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A port identifier that is in the range of 1 to ifNumber."
::= { portMapPriEntry 1 }
portMapPriClass OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For ingress untagged packets, the per port 'Default Priority'
setting will be applied to packets of each port to provide
port-based traffic prioritization.
For ingress tagged packets, if 802.1p not enabled
D-Link Smart Switches will refer to these 4
different priority queues. "
::= { portMapPriEntry 2 }
--4 default user priority--
qosDefaultUserPri OBJECT IDENTIFIER ::= { companyQoSGroup 4 }
qosDefaultUserPriTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosDefaultUserPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of 802.1p port default priority Entries."
::= { qosDefaultUserPri 1 }
qosDefaultUserPriEntry OBJECT-TYPE
SYNTAX QosDefaultUserPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of 802.1p port default priority priorities."
INDEX { qosDefaultUserPriPortIndex }
::= { qosDefaultUserPriTable 1 }
QosDefaultUserPriEntry ::= SEQUENCE {
qosDefaultUserPriPortIndex INTEGER,
qosDefaultPriority INTEGER,
qosEffectiveDefaultPriority INTEGER
}
qosDefaultUserPriPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A port identifier that is in the range of 1 to ifNumber."
::= { qosDefaultUserPriEntry 1 }
qosDefaultPriority OBJECT-TYPE
SYNTAX INTEGER {
priority0(0),
priority1(1),
priority2(2),
priority3(3),
priority4(4),
priority5(5),
priority6(6),
priority7(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For ingress untagged packets, the per port 'Default Priority'
setting will be applied to packets of each port to provide
port-based traffic prioritization when 802.1p is enabled."
::= { qosDefaultUserPriEntry 2 }
qosEffectiveDefaultPriority OBJECT-TYPE
SYNTAX INTEGER {
priority0(0),
priority1(1),
priority2(2),
priority3(3),
priority4(4),
priority5(5),
priority6(6),
priority7(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For ingress untagged packets, the per port 'Effective Default
Priority' setting will be applied to packets of each port to
provide port-based traffic prioritization when 802.1p is enabled."
::= { qosDefaultUserPriEntry 3 }
--5 vlan tag user priority --
qosUserPriority OBJECT IDENTIFIER ::= { companyQoSGroup 5 }
qosUserPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosUserPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge. Traffic class is a
number in the range (0..3)."
REFERENCE
"ISO/IEC 15802-3 Table 7-2"
::= { qosUserPriority 1 }
qosUserPriEntry OBJECT-TYPE
SYNTAX QosUserPriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User Priority to Traffic Class mapping."
INDEX {qosUserPriIndex }
::= { qosUserPriorityTable 1 }
QosUserPriEntry ::=
SEQUENCE {
qosUserPriIndex
INTEGER,
qosUserPriClass
INTEGER
}
qosUserPriIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For ingress tagged packets, D-Link Smart Switches will refer
to these information and prioritize them with 4 different priority queues.
If 802.1p is enabled."
::= { qosUserPriEntry 1 }
qosUserPriClass OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The User Class the received frame is mapped to."
::= { qosUserPriEntry 2 }
--7 priority setting on/off table --
qosPriSettings OBJECT IDENTIFIER ::= { companyQoSGroup 7 }
qosPriSettingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPriSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port priority settings."
REFERENCE
"ISO/IEC 15802-3 Table 7-2"
::= { qosPriSettings 1 }
qosPriSettingsEntry OBJECT-TYPE
SYNTAX QosPriSettingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port priority settings Entries."
INDEX {qosPriSetPortIndex }
::= { qosPriSettingsTable 1 }
QosPriSettingsEntry ::=
SEQUENCE {
qosPriSetPortIndex
INTEGER,
qosPriSetPortType
INTEGER
}
qosPriSetPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A port identifier that is in the range of 1 to ifNumber."
::= { qosPriSettingsEntry 1 }
qosPriSetPortType OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port priority setting type. (ex. none = 0, port mapping = 1,
802.1p = 2, DSCP = 4. If you want enable 802.1p & DSCP, the value
is 2 + 4 = 6. "
::= { qosPriSettingsEntry 2 }
-- ------------------------------------------------------------------
-- QoS
-- ------------------------------------------------------------------
qosDiffServ OBJECT IDENTIFIER ::= { companyQoSGroup 6 }
qosDiffServTypeGroup OBJECT IDENTIFIER ::= { qosDiffServ 1 }
qosDiffServType00 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 0 : IP ToS value = 0"
::= { qosDiffServTypeGroup 1 }
qosDiffServType01 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 01 : IP ToS value = 4"
::= { qosDiffServTypeGroup 2 }
qosDiffServType02 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 02 : IP ToS value = 8"
::= { qosDiffServTypeGroup 3 }
qosDiffServType03 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 03 : IP ToS value = 12"
::= { qosDiffServTypeGroup 4 }
qosDiffServType04 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 04 : IP ToS value = 16"
::= { qosDiffServTypeGroup 5 }
qosDiffServType05 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 05 : IP ToS value = 20"
::= { qosDiffServTypeGroup 6 }
qosDiffServType06 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 06 : IP ToS value = 24"
::= { qosDiffServTypeGroup 7 }
qosDiffServType07 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 07 : IP ToS value = 28"
::= { qosDiffServTypeGroup 8 }
qosDiffServType08 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 08 : IP ToS value = 32"
::= { qosDiffServTypeGroup 9 }
qosDiffServType09 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 09 : IP ToS value = 36"
::= { qosDiffServTypeGroup 10 }
qosDiffServType10 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 10 : IP ToS value = 40"
::= { qosDiffServTypeGroup 11 }
qosDiffServType11 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 11 : IP ToS value = 44"
::= { qosDiffServTypeGroup 12 }
qosDiffServType12 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 12 : IP ToS value = 48"
::= { qosDiffServTypeGroup 13 }
qosDiffServType13 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 13 : IP ToS value = 52"
::= { qosDiffServTypeGroup 14 }
qosDiffServType14 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 14 : IP ToS value = 56"
::= { qosDiffServTypeGroup 15 }
qosDiffServType15 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 15 : IP ToS value = 60"
::= { qosDiffServTypeGroup 16 }
qosDiffServType16 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 16 : IP ToS value = 64"
::= { qosDiffServTypeGroup 17 }
qosDiffServType17 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 17 : IP ToS value = 68"
::= { qosDiffServTypeGroup 18 }
qosDiffServType18 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 18 : IP ToS value = 72"
::= { qosDiffServTypeGroup 19 }
qosDiffServType19 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 19 : IP ToS value = 76"
::= { qosDiffServTypeGroup 20 }
qosDiffServType20 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 20 : IP ToS value = 80"
::= { qosDiffServTypeGroup 21 }
qosDiffServType21 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 21 : IP ToS value = 84"
::= { qosDiffServTypeGroup 22 }
qosDiffServType22 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 22 : IP ToS value = 88"
::= { qosDiffServTypeGroup 23 }
qosDiffServType23 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 23 : IP ToS value = 92"
::= { qosDiffServTypeGroup 24 }
qosDiffServType24 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 24 : IP ToS value = 96"
::= { qosDiffServTypeGroup 25 }
qosDiffServType25 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 25 : IP ToS value = 100"
::= { qosDiffServTypeGroup 26 }
qosDiffServType26 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 26 : IP ToS value = 104"
::= { qosDiffServTypeGroup 27 }
qosDiffServType27 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 27 : IP ToS value = 108"
::= { qosDiffServTypeGroup 28 }
qosDiffServType28 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 28 : IP ToS value = 112"
::= { qosDiffServTypeGroup 29 }
qosDiffServType29 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 29 : IP ToS value = 116"
::= { qosDiffServTypeGroup 30 }
qosDiffServType30 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 30 : IP ToS value = 120"
::= { qosDiffServTypeGroup 31 }
qosDiffServType31 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 31 : IP ToS value = 124"
::= { qosDiffServTypeGroup 32 }
qosDiffServType32 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 32 : IP ToS value = 128"
::= { qosDiffServTypeGroup 33 }
qosDiffServType33 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 33 : IP ToS value = 132"
::= { qosDiffServTypeGroup 34 }
qosDiffServType34 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 34 : IP ToS value = 136"
::= { qosDiffServTypeGroup 35 }
qosDiffServType35 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 35 : IP ToS value = 140"
::= { qosDiffServTypeGroup 36 }
qosDiffServType36 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 36 : IP ToS value = 144"
::= { qosDiffServTypeGroup 37 }
qosDiffServType37 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 37 : IP ToS value = 148"
::= { qosDiffServTypeGroup 38 }
qosDiffServType38 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 38 : IP ToS value = 152"
::= { qosDiffServTypeGroup 39 }
qosDiffServType39 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 39 : IP ToS value = 156"
::= { qosDiffServTypeGroup 40 }
qosDiffServType40 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 40 : IP ToS value = 160"
::= { qosDiffServTypeGroup 41 }
qosDiffServType41 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 41 : IP ToS value = 164"
::= { qosDiffServTypeGroup 42 }
qosDiffServType42 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 42 : IP ToS value = 168"
::= { qosDiffServTypeGroup 43 }
qosDiffServType43 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 43 : IP ToS value = 172"
::= { qosDiffServTypeGroup 44 }
qosDiffServType44 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 44 : IP ToS value = 176"
::= { qosDiffServTypeGroup 45 }
qosDiffServType45 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 45 : IP ToS value = 180"
::= { qosDiffServTypeGroup 46 }
qosDiffServType46 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 46 : IP ToS value = 184"
::= { qosDiffServTypeGroup 47 }
qosDiffServType47 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 47 : IP ToS value = 188"
::= { qosDiffServTypeGroup 48 }
qosDiffServType48 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 48 : IP ToS value = 192"
::= { qosDiffServTypeGroup 49 }
qosDiffServType49 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 49 : IP ToS value = 196"
::= { qosDiffServTypeGroup 50 }
qosDiffServType50 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 50 : IP ToS value = 200"
::= { qosDiffServTypeGroup 51 }
qosDiffServType51 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 51 : IP ToS value = 204"
::= { qosDiffServTypeGroup 52 }
qosDiffServType52 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 52 : IP ToS value = 208"
::= { qosDiffServTypeGroup 53 }
qosDiffServType53 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 53 : IP ToS value = 212"
::= { qosDiffServTypeGroup 54 }
qosDiffServType54 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 54 : IP ToS value = 216"
::= { qosDiffServTypeGroup 55 }
qosDiffServType55 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 55 : IP ToS value = 220"
::= { qosDiffServTypeGroup 56 }
qosDiffServType56 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 56 : IP ToS value = 224"
::= { qosDiffServTypeGroup 57 }
qosDiffServType57 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 57 : IP ToS value = 228"
::= { qosDiffServTypeGroup 58 }
qosDiffServType58 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 58 : IP ToS value = 232"
::= { qosDiffServTypeGroup 59 }
qosDiffServType59 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 59 : IP ToS value = 236"
::= { qosDiffServTypeGroup 60 }
qosDiffServType60 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 60 : IP ToS value = 240"
::= { qosDiffServTypeGroup 61 }
qosDiffServType61 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 61 : IP ToS value = 244"
::= { qosDiffServTypeGroup 62 }
qosDiffServType62 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 62 : IP ToS value = 248"
::= { qosDiffServTypeGroup 63 }
qosDiffServType63 OBJECT-TYPE
SYNTAX INTEGER {
low(0),
medium(1),
high(2),
highest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DiffServ Type 63 : IP ToS value = 252"
::= { qosDiffServTypeGroup 64 }
-- ------------------------------------------------------------------
-- aclQosTable
-- ------------------------------------------------------------------
qosAclPrioritySettings OBJECT IDENTIFIER ::= { companyQoSGroup 8 }
aclQosTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of priority by acl setting."
::= { qosAclPrioritySettings 1 }
aclQosEntry OBJECT-TYPE
SYNTAX AclQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of priority by acl setting entry."
INDEX { aclQosIndex }
::= { aclQosTable 1 }
AclQosEntry ::=
SEQUENCE {
aclQosIndex Integer32,
aclQosType INTEGER,
aclQosMACAddr MacAddress,
aclQosIPAddr IpAddress,
aclQosTCPUDPPort Integer32,
aclQosVlanID Integer32,
aclQosProtocol Integer32,
aclQosAssignClass INTEGER,
aclQosStatus RowStatus
}
aclQosIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of priority by acl setting."
::= { aclQosEntry 1 }
aclQosType OBJECT-TYPE
SYNTAX INTEGER { mac(0), ip(1), tcp(2), udp(3), vlanid(4), protocol(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of priority by acl setting."
::= { aclQosEntry 2 }
aclQosMACAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst MAC of priority by acl setting."
::= { aclQosEntry 3 }
aclQosIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst IP of priority by acl setting"
::= { aclQosEntry 4 }
aclQosTCPUDPPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dst TCP/UDP port of priority by acl setting"
::= { aclQosEntry 5 }
aclQosVlanID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID of priority by acl setting"
::= { aclQosEntry 6 }
aclQosProtocol OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip protocol number of priority by acl setting"
::= { aclQosEntry 7 }
aclQosAssignClass OBJECT-TYPE
SYNTAX INTEGER { class0(0), class1(1), class2(2), class3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Be mapped class of priority by acl setting."
::= { aclQosEntry 8 }
aclQosStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of priority by acl setting."
::= { aclQosEntry 9 }
-- ----------------------------------------------------------
-- The companyTrafficMgmt Groups
-- ----------------------------------------------------------
-- Bandwidth Control Group --------------------------------------------- --
bandwidthCtrlSettings OBJECT IDENTIFIER ::= { companyTrafficMgmt 1 }
bandwidthCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF BandwidthCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the rate limiting parameters
either for the entire switch or for each interface in the switch."
::= { bandwidthCtrlSettings 2 }
bandwidthCtrlEntry OBJECT-TYPE
SYNTAX BandwidthCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each physical
interface in the switch."
INDEX { bandwidthCtrlIndex }
::= { bandwidthCtrlTable 1 }
BandwidthCtrlEntry ::=
SEQUENCE {
bandwidthCtrlIndex
Integer32,
bandwidthCtrlTxThreshold
Integer32,
bandwidthCtrlRxThreshold
Integer32
}
bandwidthCtrlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { bandwidthCtrlEntry 1 }
bandwidthCtrlTxThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. The value can
be set between 64~102400(Kbits per second) in FE port, 64~1024000
(Kbits per second) in GE port.
(Note: The multiple of 1850 Kbits/sec will be set automatically because
the resolution of Giga-port Tx bandwidth control is 1850 Kbits/sec.)"
::= { bandwidthCtrlEntry 2 }
bandwidthCtrlRxThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of receive packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for receive packets on this interface. The value that
can be set for this object is limited by the underlying hardware.
The value can be set between 64~102400(Kbits per second) in FE
port, 64~1024000(Kbits per second) in GE port."
::= { bandwidthCtrlEntry 3}
-- Broadcast Storm Control Group --------------------------------------------- --
-- Broadcast Storm Control
broadcastStormCtrlSettings OBJECT IDENTIFIER ::= { companyTrafficMgmt 3 }
broadcastStormCtrlGlobalOnOff OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates storm control function is enabled or disabled
for device.
When you enable broadcast storm control function, D-Link Smart
Switches will allowed you to limit the number of broadcast packets
per second going through device."
::= { broadcastStormCtrlSettings 1 }
broadcastStormCtrlLimitType OBJECT-TYPE
SYNTAX INTEGER {
broadcastonly(1),
multicastAndbroadcast(2),
dlfMulticastAndbroadcast(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates storm control function is control broadcast
packet or multicast packet or dlf packet."
::= { broadcastStormCtrlSettings 2 }
broadcastStormCtrlThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 64..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows to configure the limiting value for the maximum number
of Kbits/sec that can be transmitted per second over this interface.
Setting this object to the value zero disables rate limiting on
this interface. The value that can be set for this object is
limited by the underlying hardware. The limit value must be between
64~1024000 and limit value is multiple of 64.
(Notice : if the limit value is 0, it means unlimited.)"
DEFVAL {0}
::= { broadcastStormCtrlSettings 3 }
-- Traffic Control Group --------------------------------------------- --
trafficCtrlSettings OBJECT IDENTIFIER ::= { companyTrafficMgmt 4 }
trafficCtrlTrap OBJECT-TYPE
SYNTAX INTEGER {
none(0),
stormOccurred(1),
stormCleared(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trap setting of traffic control."
::= { trafficCtrlSettings 1 }
trafficCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic control table."
::= { trafficCtrlSettings 2 }
trafficCtrlEntry OBJECT-TYPE
SYNTAX TrafficCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The traffic control entry."
INDEX { trafficCtrlIndex }
::= { trafficCtrlTable 1 }
TrafficCtrlEntry ::=
SEQUENCE {
trafficCtrlIndex
Integer32,
trafficCtrlActionMode
INTEGER,
trafficCtrlType
INTEGER,
trafficCtrlThreshold
Integer32,
trafficCtrlCountDown
Integer32,
trafficCtrlTimeInterval
Integer32
}
trafficCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic control index."
::= { trafficCtrlEntry 1 }
trafficCtrlActionMode OBJECT-TYPE
SYNTAX INTEGER {
drop(0),
shutdown(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action mode of traffic control."
::= { trafficCtrlEntry 2 }
trafficCtrlType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
b(1),
m(2),
mb(3),
u(4),
ub(5),
um(6),
umb(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control type of traffic control.
(b: Broadcast, m: Multicast, u: Unknown Unicast)"
::= { trafficCtrlEntry 3 }
trafficCtrlThreshold OBJECT-TYPE
SYNTAX Integer32 (1..102400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold of traffic control."
::= { trafficCtrlEntry 4 }
trafficCtrlCountDown OBJECT-TYPE
SYNTAX Integer32 (0..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The count down value of traffic control."
::= { trafficCtrlEntry 5 }
trafficCtrlTimeInterval OBJECT-TYPE
SYNTAX Integer32 (5..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval of traffic control."
::= { trafficCtrlEntry 6 }
-- ------------------------------------------------------------------
-- companySecurity
-- ------------------------------------------------------------------
-- Trusted Host
securityTrustedHost OBJECT IDENTIFIER ::= { companySecurity 1 }
trustedHostStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates trusted host function is enabled or disabled.
When trusted host function is enabled, D-Link Smart Switches will
only allow hosts which you trust to access and control the switch.
Your local host IP Addresses must be one of the IP Addresses to
avoid disconnection."
DEFVAL { disabled }
::= { securityTrustedHost 1 }
trustedHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrustedHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure trusted host in the system."
::= { securityTrustedHost 2 }
trustedHostEntry OBJECT-TYPE
SYNTAX TrustedHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents rules for particular
trusted host."
INDEX { trustedHostIpAddr, trustedHostIpMask }
::= { trustedHostTable 1 }
TrustedHostEntry ::=
SEQUENCE {
trustedHostIpAddr
IpAddress,
trustedHostIpMask
IpAddress,
trustedHostRowStatus
RowStatus
}
trustedHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of host you allow to access to D-Link Smart
Switch.
Your local host IP Addresses must be one of the IP Addresses
to avoid disconnection."
::= { trustedHostEntry 1 }
trustedHostIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to mask with IP address, it allow you set a subnet as a
trusted host entry."
::= { trustedHostEntry 2 }
trustedHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available."
::= { trustedHostEntry 3 }
securityARPSpoofPrevent OBJECT IDENTIFIER ::= { companySecurity 3}
-- aRPSpoofPrevent Control Table
aRPSpoofPreventTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARPSpoofPreventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control ARP Spoofing prevention for the entire
switch or for each interface in the switch."
::= { securityARPSpoofPrevent 1 }
aRPSpoofPreventEntry OBJECT-TYPE
SYNTAX ARPSpoofPreventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { aRPSpoofPreventIpAddr }
::= { aRPSpoofPreventTable 1 }
ARPSpoofPreventEntry ::=
SEQUENCE {
aRPSpoofPreventIpAddr
IpAddress,
aRPSpoofPreventMacAddress
MacAddress,
aRPSpoofPreventPortList
PortList,
aRPSpoofPreventRowStatus
RowStatus
}
aRPSpoofPreventIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'."
::= { aRPSpoofPreventEntry 1 }
aRPSpoofPreventMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet Mac Address."
DEFVAL { '000102030405'h }
::= { aRPSpoofPreventEntry 2 }
aRPSpoofPreventPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { aRPSpoofPreventEntry 3 }
aRPSpoofPreventRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { aRPSpoofPreventEntry 4 }
-- ------------------------------------------------------------------
-- companySecurity
-- ------------------------------------------------------------------
securitySSL OBJECT IDENTIFIER ::= { companySecurity 5 }
sslSecurityHttpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling secure HTTP in the system."
DEFVAL { disable }
::= { securitySSL 1 }
sslCiphers OBJECT IDENTIFIER ::= { securitySSL 2 }
sslCipherSuiteList OBJECT-TYPE
SYNTAX BITS {
rsa-null-md5(0),
rsa-null-sha(1),
rsa-des-sha(2),
rsa-3des-sha(3),
dh-rsa-des-sha(4),
dh-rsa-3des-sha(5),
rsa-exp1024-des-sha(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the cipher-suites list."
::= { sslCiphers 1}
-- ------------------------------------------------------------------
-- companySecurity
-- ------------------------------------------------------------------
securitySSH OBJECT IDENTIFIER ::= { companySecurity 8 }
sshSecurityStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling ssh in the system."
DEFVAL { disable }
::= { securitySSH 1}
sshMaxAuthFailAttempts OBJECT-TYPE
SYNTAX INTEGER (2..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the max auth fail retry attempt times."
::= {securitySSH 2}
sshSessionKeyRekeying OBJECT-TYPE
SYNTAX INTEGER {
never(0),
ten-min(10),
thirty-min(30),
sixty-min(60)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates one SSH session rekey time interval."
::= {securitySSH 3}
sshMaxSession OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates max SSH session number supported in system."
::= {securitySSH 4}
sshConnectionTimeout OBJECT-TYPE
SYNTAX INTEGER (120..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates SSH connection timeout value."
::= {securitySSH 5}
--************************************************************************
-- SSH encryption algorithm group configuration
--************************************************************************
sshAuthenMethodPassWordAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates authen method password is enabled or disabled."
::= {securitySSH 6}
sshAuthenMethodPubKeyAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates authen method public-key is enabled or disabled."
::= {securitySSH 7}
sshAuthenMethodHostKeyAdmin OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates authen method host-key is enabled or disabled."
::= {securitySSH 8}
sshCipherSuiteList OBJECT-TYPE
SYNTAX BITS {
tripleDESCBC(0),
dESCBC(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the cipher-suites list."
::= { securitySSH 9}
sshMacSuiteList OBJECT-TYPE
SYNTAX BITS {
hMAC-SHA1(0),
hMAC-MD5(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to configure the MAC-list."
::= { securitySSH 10}
sshPublKeyRSAAdmin OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates Public key generating algorithm RSA is enabled or disabled."
::= {securitySSH 11}
--************************************************************************
-- SSH User Auth Info.
--************************************************************************
sshUserInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshUserInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure SSH user auth in the system."
::= { securitySSH 12 }
sshUserInfoEntry OBJECT-TYPE
SYNTAX SshUserInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry to configure user auth in the system."
INDEX { sshUserInfoID }
::= { sshUserInfoTable 1 }
SshUserInfoEntry ::=
SEQUENCE {
sshUserInfoID Integer32,
sshUserInfoUserName DisplayString,
sshUserInfoAuth INTEGER,
sshUserInfoHostName DisplayString,
sshUserInfoHostIp IpAddress
}
sshUserInfoID OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Schedule identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 8."
::= { sshUserInfoEntry 1 }
sshUserInfoUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ssh user name associated with the SSH suer Info. entry (e.g., `admin, user')."
::= { sshUserInfoEntry 2}
sshUserInfoAuth OBJECT-TYPE
SYNTAX INTEGER {
publickey(4),
password(2),
hostbased(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates which auth used by the user."
::= {sshUserInfoEntry 3}
sshUserInfoHostName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ssh host name associated with the SSH suer Info. entry (e.g., `DUT1, DUT2')."
::= { sshUserInfoEntry 4}
sshUserInfoHostIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH HostBased IP Address of the system."
::= { sshUserInfoEntry 5 }
-- ----------------------------------------------------------
-- The companySecurity Groups
-- ----------------------------------------------------------
securityPortSecurity OBJECT IDENTIFIER ::= { companySecurity 2 }
-- Port Security Group --------------------------------------------- --
portSecTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control port security features of the device."
::= { securityPortSecurity 1 }
portSecEntry OBJECT-TYPE
SYNTAX PortSecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in port security table for each interface
in the system."
INDEX { portSecIndex }
::= { portSecTable 1 }
PortSecEntry ::=
SEQUENCE {
portSecIndex
Integer32,
portSecState
INTEGER,
portSecMLA
Integer32
-- start DLINK-METRO-LIKE-LOCK-ADDRESS-MODE
,
portSecLockAddrMode
INTEGER
-- end DLINK-METRO-LIKE-LOCK-ADDRESS-MODE
}
portSecIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { portSecEntry 1 }
portSecState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1), disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable / disable port security admin state for the interface.
A given ports' dynamic MAC address learning will be stopped such
that the current source MAC addresses entered into the MAC address
forwarding table can not be changed once the port security admin
state is enabled."
::= { portSecEntry 2 }
portSecMLA OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface port security maximum learning address
numbers.
When given ports' admin state is enabled, allows forwarding
table learning address number. The number can be set 0 to 64.
Note: Set value 0 means cannot learn MAC address."
::= {portSecEntry 3}
-- start DLINK-METRO-LIKE-LOCK-ADDRESS-MODE
portSecLockAddrMode OBJECT-TYPE
SYNTAX INTEGER {
deleteOnReset (1),
deleteOnTimeout (2),
permanent(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures port security lock address mode for the interface.
deleteOnReset : The locked addresses will not age out until the Switch has been reset.
deleteOnTimeout : The locked addresses will age out after the aging timer expires.
Permanent : The locked addresses will not age out after the aging timer expires."
::= { portSecEntry 4 }
portSecFDBPermanentTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecFDBPermanentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control port security FDB Permanent of the device."
::= { securityPortSecurity 2 }
portSecFDBPermanentEntry OBJECT-TYPE
SYNTAX PortSecFDBPermanentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in port security table for each interface
in the system."
INDEX { portSecFDBPermPort, portSecFDBPermIndex}
::= { portSecFDBPermanentTable 1 }
PortSecFDBPermanentEntry ::=
SEQUENCE {
portSecFDBPermIndex INTEGER,
portSecFDBPermVlanID INTEGER,
portSecFDBPermMac MacAddress,
portSecFDBPermPort INTEGER
}
portSecFDBPermIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port security MAC entry."
::= { portSecFDBPermanentEntry 1 }
portSecFDBPermVlanID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the port security MAC entry."
::= { portSecFDBPermanentEntry 2 }
portSecFDBPermMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address associated of the port security MAC entry."
::= { portSecFDBPermanentEntry 3 }
portSecFDBPermPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forwarding port of the port security MAC entry."
::= { portSecFDBPermanentEntry 4 }
-- end DLINK-METRO-LIKE-LOCK-ADDRESS-MODE
-- ------------------------------------------------------------------
-- companyACLGroup
-- ------------------------------------------------------------------
-- ACL Profile Group --------------------------------------------------
aclProfile OBJECT IDENTIFIER ::= { companyACLGroup 1 }
aclProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to ACL profile .
"
::= { aclProfile 1 }
aclProfileEntry OBJECT-TYPE
SYNTAX AclProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a ACL profile.
Index to the table is ACL profile ID. "
INDEX { aclProfileNo}
::= { aclProfileTable 1 }
AclProfileEntry ::=
SEQUENCE {
aclProfileNo
Integer32,
aclProfileType
INTEGER,
aclProfileRuleCount
Integer32,
aclProfileMask
OCTET STRING,
aclProfileDstMacAddrMask
MacAddress,
aclProfileSrcMacAddrMask
MacAddress,
aclProfileIPProtocol
INTEGER,
aclProfileIPProtocolMask
OCTET STRING,
aclProfileDstIpAddrMask
IpAddress,
aclProfileSrcIpAddrMask
IpAddress,
aclProfileDstPortMask
OCTET STRING,
aclProfileSrcPortMask
OCTET STRING,
aclProfileArpSenderMacAddrMask
MacAddress,
aclProfileArpSenderIpAddrMask
IpAddress,
aclProfileStatus
RowStatus
}
aclProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL Profile ID. The ID 1 to 50 is user-defined ACL,
and the ID more than 50 is reserved for system-defined ACL.
The user only allow to create user-defined ACL ID.
And system-defined ACL is read only."
::= { aclProfileEntry 1 }
aclProfileType OBJECT-TYPE
SYNTAX INTEGER {
l2 (1),
l3 (2),
arpSP-permit(4),
arpSP-deny(5),
voiceVlan(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile type, possible value are
l2 (1) - for MAC-based rule,
l3 (2) - for IPv4-based rule,
arpSP-permit(4) - for ARP Spoofing prevention entry,
arpSP-deny(5) - for ARP Spoofing prevention entry,
voiceVlan(6) - for Voice VLAN OUI entry.
Note that only l2 and l3 could be set by user,
other is reserved for system to show information.
"
::= { aclProfileEntry 2 }
aclProfileRuleCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rules in this profile."
::= { aclProfileEntry 3 }
aclProfileMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST-MAC 0 (LSB)
L2 SRC-MAC 1
L2 VID 2
L2 8021P-PRIORITY 3
L2 ETHER-TYPE 4
L3 DSCP 5
L3 ICMP-TYPE 6
L3 ICMP-CODE 7
L3 IGMP-TYPE 8
L3 DST-IP 9
L3 SRC-IP 10
L3 DST-PORT 11
L3 SRC-PORT 12
L3 TCPFLAG 13
ARP-SP ARP-SENDER-MAC 14
ARP-SP ARP-SENDER-IP 15 (MSB)
-------------------------------------------
The value is in Hex format.
"
::= { aclProfileEntry 4 }
aclProfileDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile destination MAC address mask.
If DST-MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleDstMacAddr,
to caculate a range of MAC address which is really care.
"
::= { aclProfileEntry 5 }
aclProfileSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile source MAC address mask.
If SRC-MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleSrcMacAddr,
to caculate a range of MAC address which is really care.
"
::= { aclProfileEntry 6 }
aclProfileIPProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
icmp(1),
igmp(2),
tcp(6),
udp(17)
,ipMask(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
"
::= { aclProfileEntry 7 }
aclProfileIPProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile IP protocol mask.
If aclProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { aclProfileEntry 8 }
aclProfileDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile destination IP address mask.
If DST-IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleDstIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 9 }
aclProfileSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile source IP address mask.
If SRC-IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleSrcIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 10 }
aclProfileDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile UDP/TCP destination port mask.
If DST-PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpDstPort,
to caculate a range of destination port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { aclProfileEntry 11 }
aclProfileSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ACL Profile UDP/TCP source port mask.
If SRC-PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpSrcPort,
to caculate a range of source port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { aclProfileEntry 12 }
aclProfileArpSenderMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL Profile Sender MAC mask.
This is only for ARP Spoofing Prevention which is System-defined ACL,
and it's not allow to modify.
The value is in HEX format.
"
DEFVAL { 'FFFFFFFFFF'h }
::= { aclProfileEntry 13 }
aclProfileArpSenderIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL Profile Sender IP mask.
This is only for ARP Spoofing Prevention which is System-defined ACL,
and it's not allow to modify.
The value is in HEX format.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclProfileEntry 14 }
aclProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of aclProfileType,
aclProfileMask and ProtocolType are not conflicted.
"
::= { aclProfileEntry 15 }
-- ------------------------------------------------------------------
-- L2 Filter Group --------------------------------------------------
aclL2Rule OBJECT IDENTIFIER ::= { companyACLGroup 2 }
aclL2RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { aclL2Rule 1 }
aclL2RuleEntry OBJECT-TYPE
SYNTAX AclL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID."
INDEX { aclL2AccessID, aclL2ProfileID}
::= { aclL2RuleTable 1 }
AclL2RuleEntry ::=
SEQUENCE {
aclL2AccessID
Integer32,
aclL2ProfileID
Integer32,
aclL2RuleEtherType
Integer32,
aclL2RuleDstMacAddr
MacAddress,
aclL2RuleSrcMacAddr
MacAddress,
aclL2RuleVlanId
Integer32,
aclL2Rule1pPriority
Integer32,
aclL2RuleDstMacAddrMask
MacAddress,
aclL2RuleSrcMacAddrMask
MacAddress,
aclL2RuleInPortList
PortList,
aclL2RuleAction
INTEGER,
aclL2RuleRateLimit
Unsigned32,
aclL2RuleReplaceDSCP
Integer32,
aclL2RuleStatus
RowStatus
}
aclL2AccessID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L2 Filter rule ID."
::= { aclL2RuleEntry 1 }
aclL2ProfileID OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL Profile ID which this rule join."
DEFVAL { 1 }
::= { aclL2RuleEntry 2 }
aclL2RuleEtherType OBJECT-TYPE
SYNTAX Integer32 (-1 | 1501..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition."
DEFVAL { -1 }
::= { aclL2RuleEntry 3 }
aclL2RuleDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition."
::= { aclL2RuleEntry 4 }
aclL2RuleSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address"
::= { aclL2RuleEntry 5 }
aclL2RuleVlanId OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL2RuleEntry 6 }
aclL2Rule1pPriority OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL2RuleEntry 7 }
aclL2RuleDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address Mask work for Destination MAC address.
This field is read-only and copy from it's Profile setting."
::= { aclL2RuleEntry 8 }
aclL2RuleSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address Mask work for Source MAC address.
This field is read-only and copy from it's Profile setting."
::= { aclL2RuleEntry 9 }
aclL2RuleInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list."
::= { aclL2RuleEntry 10 }
aclL2RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
,mirror (3)
,rateLimit(4)
,replaceDSCP(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { aclL2RuleEntry 11 }
aclL2RuleRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limit for matched packet."
::= { aclL2RuleEntry 12 }
aclL2RuleReplaceDSCP OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace DSCP for matched packet."
::= { aclL2RuleEntry 13 }
aclL2RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL2RuleEntry 14 }
-- ------------------------------------------------------------------
-- L3 Filter Group --------------------------------------------------
aclL3Rule OBJECT IDENTIFIER ::= { companyACLGroup 3 }
aclL3RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclL3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { aclL3Rule 1 }
aclL3RuleEntry OBJECT-TYPE
SYNTAX AclL3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID."
INDEX { aclL3RuleAccessID, aclL3RuleProfileNo}
::= { aclL3RuleTable 1 }
AclL3RuleEntry ::=
SEQUENCE {
aclL3RuleAccessID
Integer32,
aclL3RuleProfileNo
Integer32,
aclL3RuleProtocol
INTEGER,
aclL3RuleProtocolMask
OCTET STRING,
aclL3RuleICMPMessageType
Integer32,
aclL3RuleICMPMessageCode
Integer32,
aclL3RuleDstIpAddr
IpAddress,
aclL3RuleSrcIpAddr
IpAddress,
aclL3RuleDstIpAddrMask
IpAddress,
aclL3RuleSrcIpAddrMask
IpAddress,
aclL3RuleTcpUdpDstPort
Integer32,
aclL3RuleTcpUdpSrcPort
Integer32,
aclL3RuleTcpUdpDstPortMask
OCTET STRING,
aclL3RuleTcpUdpSrcPortMask
OCTET STRING,
aclL3RuleTcpAckBit
INTEGER,
aclL3RuleTcpRstBit
INTEGER,
aclL3RuleTcpUrgBit
INTEGER,
aclL3RuleTcpPshBit
INTEGER,
aclL3RuleTcpSynBit
INTEGER,
aclL3RuleTcpFinBit
INTEGER,
aclL3RuleDscp
Integer32,
aclL3RuleIgmpType
Integer32,
aclL3RulePortList
PortList,
aclL3RuleAction
INTEGER,
aclL3RuleRateLimit
Unsigned32,
aclL3RuleReplaceDSCP
Integer32,
aclL3RuleStatus
RowStatus
}
aclL3RuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { aclL3RuleEntry 1 }
aclL3RuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { aclL3RuleEntry 2 }
aclL3RuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
icmp(1),
igmp(2),
tcp(6),
udp(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
::= { aclL3RuleEntry 3 }
aclL3RuleProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { aclL3RuleEntry 4 }
aclL3RuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { aclL3RuleEntry 5 }
aclL3RuleICMPMessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { aclL3RuleEntry 6 }
aclL3RuleDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3RuleEntry 7 }
aclL3RuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3RuleEntry 8 }
aclL3RuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclL3RuleEntry 9 }
aclL3RuleSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclL3RuleEntry 10 }
aclL3RuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 11 }
aclL3RuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 12 }
aclL3RuleTcpUdpDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { aclL3RuleEntry 13 }
aclL3RuleTcpUdpSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { aclL3RuleEntry 14 }
aclL3RuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'dont-care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 15 }
aclL3RuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'dont-care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 16 }
aclL3RuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'dont-care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 17 }
aclL3RuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'dont-care'(-1). which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 18 }
aclL3RuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'dont-care'(-1), which means the rule don't care this condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 19 }
aclL3RuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
dont-care(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'dont-care'(-1), which means the rule don't care this
condition."
DEFVAL { dont-care }
::= { aclL3RuleEntry 20 }
aclL3RuleDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 21 }
aclL3RuleIgmpType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The IGMP Type to be checked against the packet.A default value is '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 22 }
aclL3RulePortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable."
::= { aclL3RuleEntry 23 }
aclL3RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
,mirror (3)
,rateLimit(4)
,replaceDSCP(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { aclL3RuleEntry 24 }
aclL3RuleRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limit for matched packet."
::= { aclL3RuleEntry 25 }
aclL3RuleReplaceDSCP OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ReplaceDSCP for matched packet."
::= { aclL3RuleEntry 26 }
aclL3RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL3RuleEntry 27 }
-- ------------------------------------------------------------------
-- companyCPUInterfaceFilterGroup
-- ------------------------------------------------------------------
-- CPU Interface Filter Profile Group --------------------------------------------------
cpuFilterProfile OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 1 }
cpuFilterProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to CPUInterfaceFilter profile .
"
::= { cpuFilterProfile 1 }
cpuFilterProfileEntry OBJECT-TYPE
SYNTAX CpuFilterProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a CPUInterfaceFilter profile.
Index to the table is CPUInterfaceFilter profile ID. "
INDEX { cpuFilterProfileNo}
::= { cpuFilterProfileTable 1 }
CpuFilterProfileEntry ::=
SEQUENCE {
cpuFilterProfileNo
Integer32,
cpuFilterProfileType
INTEGER,
cpuFilterProfileRuleCount
Integer32,
cpuFilterProfileMask
OCTET STRING,
cpuFilterProfileDstMacAddrMask
MacAddress,
cpuFilterProfileSrcMacAddrMask
MacAddress,
cpuFilterProfileIPProtocol
INTEGER,
cpuFilterProfileIPProtocolMask
OCTET STRING,
cpuFilterProfileDstIpAddrMask
IpAddress,
cpuFilterProfileSrcIpAddrMask
IpAddress,
cpuFilterProfileDstPortMask
OCTET STRING,
cpuFilterProfileSrcPortMask
OCTET STRING,
cpuFilterProfileStatus
RowStatus
}
cpuFilterProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile ID. The ID 1 to 50 is user-defined CPUInterfaceFilter,
and the ID more than 50 is reserved for system-defined CPUInterfaceFilter.
The user only allow to create user-defined CPUInterfaceFilter ID.
And system-defined CPUInterfaceFilter is read only."
::= { cpuFilterProfileEntry 1 }
cpuFilterProfileType OBJECT-TYPE
SYNTAX INTEGER {
l2 (1),
l3 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile type, possible value are
l2 (1) - for MAC-based rule,
l3 (2) - for IPv4-based rule,
"
::= { cpuFilterProfileEntry 2 }
cpuFilterProfileRuleCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rules in this profile."
::= { cpuFilterProfileEntry 3 }
cpuFilterProfileMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST-MAC 0 (LSB)
L2 SRC-MAC 1
L2 VID 2
L2 8021P-PRIORITY 3
L2 ETHER-TYPE 4
L3 DSCP 5
L3 ICMP-TYPE 6
L3 ICMP-CODE 7
L3 IGMP-TYPE 8
L3 DST-IP 9
L3 SRC-IP 10
L3 DST-PORT 11
L3 SRC-PORT 12
L3 TCPFLAG 13 (MSB)
-------------------------------------------
The value is in Hex format.
"
::= { cpuFilterProfileEntry 4 }
cpuFilterProfileDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile destination MAC address mask.
If DST-MAC is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL2RuleDstMacAddr,
to caculate a range of MAC address which is really care.
"
::= { cpuFilterProfileEntry 5 }
cpuFilterProfileSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile source MAC address mask.
If SRC-MAC is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL2RuleSrcMacAddr,
to caculate a range of MAC address which is really care.
"
::= { cpuFilterProfileEntry 6 }
cpuFilterProfileIPProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(0),
icmp(1),
igmp(2),
tcp(6),
udp(17)
,ipMask(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
"
::= { cpuFilterProfileEntry 7 }
cpuFilterProfileIPProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile IP protocol mask.
If cpuFilterProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,cpuFilterL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { cpuFilterProfileEntry 8 }
cpuFilterProfileDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile destination IP address mask.
If DST-IP is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleDstIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterProfileEntry 9 }
cpuFilterProfileSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile source IP address mask.
If SRC-IP is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleSrcIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX format, for example:
'255.255.255.0' is presented to 'FFFFFF00'
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterProfileEntry 10 }
cpuFilterProfileDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile UDP/TCP destination port mask.
If DST-PORT is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleTcpUdpDstPort,
to caculate a range of destination port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { cpuFilterProfileEntry 11 }
cpuFilterProfileSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CPUInterfaceFilter Profile UDP/TCP source port mask.
If SRC-PORT is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleTcpUdpSrcPort,
to caculate a range of source port which is really care.
The value is in HEX format.
"
DEFVAL { 'FFFF'h }
::= { cpuFilterProfileEntry 12 }
cpuFilterProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of cpuFilterProfileType,
cpuFilterProfileMask and ProtocolType are not conflicted.
"
::= { cpuFilterProfileEntry 15 }
-- ------------------------------------------------------------------
-- L2 Filter Group --------------------------------------------------
cpuFilterL2Rule OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 2 }
cpuFilterL2RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuFilterL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure L2 filter rules in the system."
::= { cpuFilterL2Rule 1 }
cpuFilterL2RuleEntry OBJECT-TYPE
SYNTAX CpuFilterL2RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID."
INDEX { cpuFilterL2ProfileID, cpuFilterL2AccessID}
::= { cpuFilterL2RuleTable 1 }
CpuFilterL2RuleEntry ::=
SEQUENCE {
cpuFilterL2ProfileID
Integer32,
cpuFilterL2AccessID
Integer32,
cpuFilterL2RuleEtherType
Integer32,
cpuFilterL2RuleDstMacAddr
MacAddress,
cpuFilterL2RuleSrcMacAddr
MacAddress,
cpuFilterL2RuleVlanId
Integer32,
cpuFilterL2Rule1pPriority
Integer32,
cpuFilterL2RuleDstMacAddrMask
MacAddress,
cpuFilterL2RuleSrcMacAddrMask
MacAddress,
cpuFilterL2RuleInPortList
PortList,
cpuFilterL2RuleAction
INTEGER,
cpuFilterL2RuleStatus
RowStatus
}
cpuFilterL2ProfileID OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L2 Filter rule ID."
::= { cpuFilterL2RuleEntry 1 }
cpuFilterL2AccessID OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPUInterfaceFilter Profile ID which this rule join."
DEFVAL { 1 }
::= { cpuFilterL2RuleEntry 2 }
cpuFilterL2RuleEtherType OBJECT-TYPE
SYNTAX Integer32 (-1 | 1501..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition."
DEFVAL { -1 }
::= { cpuFilterL2RuleEntry 3 }
cpuFilterL2RuleDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition."
::= { cpuFilterL2RuleEntry 4 }
cpuFilterL2RuleSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address"
::= { cpuFilterL2RuleEntry 5 }
cpuFilterL2RuleVlanId OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL2RuleEntry 6 }
cpuFilterL2Rule1pPriority OBJECT-TYPE
SYNTAX Integer32 (-1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL2RuleEntry 7 }
cpuFilterL2RuleDstMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address Mask work for Destination MAC address.
This field is read-only and copy from it's Profile setting."
::= { cpuFilterL2RuleEntry 8 }
cpuFilterL2RuleSrcMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address Mask work for Source MAC address.
This field is read-only and copy from it's Profile setting."
::= { cpuFilterL2RuleEntry 9 }
cpuFilterL2RuleInPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list."
::= { cpuFilterL2RuleEntry 10 }
cpuFilterL2RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded."
DEFVAL { allow }
::= { cpuFilterL2RuleEntry 11 }
cpuFilterL2RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { cpuFilterL2RuleEntry 14 }
-- ------------------------------------------------------------------
-- L3 Filter Group --------------------------------------------------
cpuFilterL3Rule OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 3 }
cpuFilterL3RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuFilterL3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table to configure L3 filter rules in the system.
"
::= { cpuFilterL3Rule 1 }
cpuFilterL3RuleEntry OBJECT-TYPE
SYNTAX CpuFilterL3RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID."
INDEX { cpuFilterL3RuleProfileNo, cpuFilterL3RuleAccessID}
::= { cpuFilterL3RuleTable 1 }
CpuFilterL3RuleEntry ::=
SEQUENCE {
cpuFilterL3RuleProfileNo
Integer32,
cpuFilterL3RuleAccessID
Integer32,
cpuFilterL3RuleProtocol
INTEGER,
cpuFilterL3RuleProtocolMask
OCTET STRING,
cpuFilterL3RuleICMPMessageType
Integer32,
cpuFilterL3RuleICMPMessageCode
Integer32,
cpuFilterL3RuleDstIpAddr
IpAddress,
cpuFilterL3RuleSrcIpAddr
IpAddress,
cpuFilterL3RuleDstIpAddrMask
IpAddress,
cpuFilterL3RuleSrcIpAddrMask
IpAddress,
cpuFilterL3RuleTcpUdpDstPort
Integer32,
cpuFilterL3RuleTcpUdpSrcPort
Integer32,
cpuFilterL3RuleTcpUdpDstPortMask
OCTET STRING,
cpuFilterL3RuleTcpUdpSrcPortMask
OCTET STRING,
cpuFilterL3RuleTcpAckBit
INTEGER,
cpuFilterL3RuleTcpRstBit
INTEGER,
cpuFilterL3RuleTcpUrgBit
INTEGER,
cpuFilterL3RuleTcpPshBit
INTEGER,
cpuFilterL3RuleTcpSynBit
INTEGER,
cpuFilterL3RuleTcpFinBit
INTEGER,
cpuFilterL3RuleDscp
Integer32,
cpuFilterL3RuleIgmpType
Integer32,
cpuFilterL3RulePortList
PortList,
cpuFilterL3RuleAction
INTEGER,
cpuFilterL3RuleStatus
RowStatus
}
cpuFilterL3RuleProfileNo OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L3 Filter rule ID."
::= { cpuFilterL3RuleEntry 1 }
cpuFilterL3RuleAccessID OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Profile ID which this rule join."
::= { cpuFilterL3RuleEntry 2 }
cpuFilterL3RuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
icmp(1),
igmp(2),
tcp(6),
udp(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
::= { cpuFilterL3RuleEntry 3 }
cpuFilterL3RuleProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,cpuFilterL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { cpuFilterL3RuleEntry 4 }
cpuFilterL3RuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 5 }
cpuFilterL3RuleICMPMessageCode OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),
"
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 6 }
cpuFilterL3RuleDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { cpuFilterL3RuleEntry 7 }
cpuFilterL3RuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { cpuFilterL3RuleEntry 8 }
cpuFilterL3RuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterL3RuleEntry 9 }
cpuFilterL3RuleSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { cpuFilterL3RuleEntry 10 }
cpuFilterL3RuleTcpUdpDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 11 }
cpuFilterL3RuleTcpUdpSrcPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 12 }
cpuFilterL3RuleTcpUdpDstPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { cpuFilterL3RuleEntry 13 }
cpuFilterL3RuleTcpUdpSrcPortMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
"
::= { cpuFilterL3RuleEntry 14 }
cpuFilterL3RuleTcpAckBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP ACK bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 15 }
cpuFilterL3RuleTcpRstBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP RST bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 16 }
cpuFilterL3RuleTcpUrgBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Urg bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 17 }
cpuFilterL3RuleTcpPshBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Psh bit to be checked against the packet. The default
value is 'dontcare'(-1). which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 18 }
cpuFilterL3RuleTcpSynBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Syn bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 19 }
cpuFilterL3RuleTcpFinBit OBJECT-TYPE
SYNTAX INTEGER {
dontcare(-1),
establish(1),
notEstablish(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The TCP Fin bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition."
DEFVAL { dontcare }
::= { cpuFilterL3RuleEntry 20 }
cpuFilterL3RuleDscp OBJECT-TYPE
SYNTAX Integer32 (-1..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition."
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 21 }
cpuFilterL3RuleIgmpType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The IGMP Type to be checked against the packet.A default value is '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { cpuFilterL3RuleEntry 22 }
cpuFilterL3RulePortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable."
::= { cpuFilterL3RuleEntry 23 }
cpuFilterL3RuleAction OBJECT-TYPE
SYNTAX INTEGER {
allow (1)
,drop (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken on the packet if the filter
rule matches."
DEFVAL { allow }
::= { cpuFilterL3RuleEntry 24 }
cpuFilterL3RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { cpuFilterL3RuleEntry 27 }
snmpGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling SNMP Community function."
::= { companySNMPV3 1 }
snmpV3User OBJECT IDENTIFIER ::= { companySNMPV3 2 }
snmpV3Group OBJECT IDENTIFIER ::= { companySNMPV3 3 }
snmpV3ViewTree OBJECT IDENTIFIER ::= { companySNMPV3 4 }
snmpV3Community OBJECT IDENTIFIER ::= { companySNMPV3 5 }
snmpV3Host OBJECT IDENTIFIER ::= { companySNMPV3 6 }
snmpV3EngineID OBJECT-TYPE
SYNTAX SnmpEngineID
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent's
own snmpEngineID value.
The value can also take the value of the snmpEngineID
of a remote SNMP engine with which this user can
communicate."
::= { companySNMPV3 7 }
snmpV3Trap OBJECT IDENTIFIER ::= { companySNMPV3 8 }
-- ----------------------------------------------------------------
-- The snmpV3User group
-- ----------------------------------------------------------------
snmpV3UserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3UserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3User 1 }
snmpV3UserEntry OBJECT-TYPE
SYNTAX SnmpV3UserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3UserName , snmpV3UserVersion}
::= { snmpV3UserTable 1 }
SnmpV3UserEntry ::= SEQUENCE {
snmpV3UserName SnmpAdminString,
snmpV3UserVersion INTEGER,
snmpV3UserGroupName SnmpAdminString,
snmpV3UserAuthProtocol INTEGER,
snmpV3UserAuthProtocolPassword SnmpAdminString,
snmpV3UserPrivProtocol INTEGER,
snmpV3UserPrivProtocolPassword SnmpAdminString,
snmpV3UserStatus RowStatus
}
snmpV3UserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.
"
::= { snmpV3UserEntry 1 }
snmpV3UserVersion OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.
"
::= { snmpV3UserEntry 2 }
snmpV3UserGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.
"
::= { snmpV3UserEntry 3 }
snmpV3UserAuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
none (1),
md5 (2),
sha (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
UserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoAuthProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoAuthProtocol, then an 'inconsistentValue'
error must be returned.
If a set operation tries to set the value to the
NoAuthProtocol while the UserPrivProtocol value
in the same row is not equal to NoPrivProtocol,
then an 'inconsistentValue' error must be returned.
That means that an SNMP command generator application
must first ensure that the UserPrivProtocol is set
to the NoPrivProtocol value before it can set
the UserAuthProtocol value to NoAuthProtocol.
"
::= { snmpV3UserEntry 4 }
snmpV3UserAuthProtocolPassword OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { snmpV3UserEntry 5 }
snmpV3UserPrivProtocol OBJECT-TYPE
SYNTAX INTEGER {
none (1),
des (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
usmUserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoPrivProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoPrivProtocol, then an 'inconsistentValue'
error must be returned.
Note that if any privacy protocol is used, then you
must also use an authentication protocol. In other
words, if usmUserPrivProtocol is set to anything else
than NoPrivProtocol, then the corresponding instance
of usmUserAuthProtocol cannot have a value of
usmNoAuthProtocol. If it does, then an
'inconsistentValue' error must be returned.
"
::= { snmpV3UserEntry 6 }
snmpV3UserPrivProtocolPassword OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { snmpV3UserEntry 7 }
snmpV3UserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
In particular, a newly created row for a user who
employs authentication, cannot be made active until the
corresponding usmUserCloneFrom and usmUserAuthKeyChange
have been set.
Further, a newly created row for a user who also
employs privacy, cannot be made active until the
usmUserPrivKeyChange has been set.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified,
except for usmUserOwnAuthKeyChange and
usmUserOwnPrivKeyChange. For these 2 objects, the
value of usmUserStatus MUST be active.
"
::= { snmpV3UserEntry 8 }
-- ----------------------------------------------------------------
-- The snmpV3Group group
-- ----------------------------------------------------------------
snmpV3GroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3GroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3Group 1 }
snmpV3GroupEntry OBJECT-TYPE
SYNTAX SnmpV3GroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3GroupName ,snmpV3GroupSecurityModel ,snmpV3GroupSecurityLevel}
::= { snmpV3GroupTable 1 }
SnmpV3GroupEntry ::= SEQUENCE {
snmpV3GroupName SnmpAdminString,
snmpV3GroupSecurityModel INTEGER,
snmpV3GroupSecurityLevel SnmpSecurityLevel,
snmpV3GroupReadViewName SnmpAdminString,
snmpV3GroupWriteViewName SnmpAdminString,
snmpV3GroupNotifyViewName SnmpAdminString,
snmpV3GroupStatus RowStatus
}
snmpV3GroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.
"
::= { snmpV3GroupEntry 1 }
snmpV3GroupSecurityModel OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3 (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In order to gain the access rights allowed by this
conceptual row, this securityModel must be in use.
"
::= { snmpV3GroupEntry 2 }
snmpV3GroupSecurityLevel OBJECT-TYPE
SYNTAX SnmpSecurityLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum level of security required in order to
gain the access rights allowed by this conceptual
row. A securityLevel of noAuthNoPriv is less than
authNoPriv which in turn is less than authPriv.
If multiple entries are equally indexed except for
this vacmAccessSecurityLevel index, then the entry
which has the highest value for
vacmAccessSecurityLevel is selected.
"
::= { snmpV3GroupEntry 3 }
snmpV3GroupReadViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes read access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpV3GroupEntry 4 }
snmpV3GroupWriteViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes write access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpV3GroupEntry 5 }
snmpV3GroupNotifyViewName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes access for notifications.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.
"
-- DEFVAL { ''H } -- -- the empty string --
::= { snmpV3GroupEntry 6 }
snmpV3GroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.
"
::= { snmpV3GroupEntry 7 }
-- ----------------------------------------------------------------
-- The snmpV3ViewTree group
-- ----------------------------------------------------------------
snmpV3ViewTreeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3ViewTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3ViewTree 1 }
snmpV3ViewTreeEntry OBJECT-TYPE
SYNTAX SnmpV3ViewTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3viewTreeName ,snmpV3viewTreeSubtree }
::= { snmpV3ViewTreeTable 1 }
SnmpV3ViewTreeEntry ::= SEQUENCE
{
snmpV3viewTreeName SnmpAdminString,
snmpV3viewTreeSubtree OBJECT IDENTIFIER,
snmpV3viewTreeMask OCTET STRING,
snmpV3viewTreeType INTEGER,
snmpV3viewTreeStatus RowStatus
}
snmpV3viewTreeName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The human readable name for a family of view subtrees.
"
::= { snmpV3ViewTreeEntry 1 }
snmpV3viewTreeSubtree OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MIB subtree which when combined with the
corresponding instance of vacmViewTreeFamilyMask
defines a family of view subtrees.
"
::= { snmpV3ViewTreeEntry 2 }
snmpV3viewTreeMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bit mask which, in combination with the
corresponding instance of vacmViewTreeFamilySubtree,
defines a family of view subtrees.
Each bit of this bit mask corresponds to a
sub-identifier of vacmViewTreeFamilySubtree, with the
most significant bit of the i-th octet of this octet
string value (extended if necessary, see below)
corresponding to the (8*i - 7)-th sub-identifier, and
the least significant bit of the i-th octet of this
octet string corresponding to the (8*i)-th
sub-identifier, where i is in the range 1 through 16.
Each bit of this bit mask specifies whether or not
the corresponding sub-identifiers must match when
determining if an OBJECT IDENTIFIER is in this
family of view subtrees; a '1' indicates that an
exact match must occur; a '0' indicates 'wild card',
i.e., any sub-identifier value matches.
Thus, the OBJECT IDENTIFIER X of an object instance
is contained in a family of view subtrees if, for
each sub-identifier of the value of
vacmViewTreeFamilySubtree, either:
the i-th bit of vacmViewTreeFamilyMask is 0, or
the i-th sub-identifier of X is equal to the i-th
sub-identifier of the value of
vacmViewTreeFamilySubtree.
If the value of this bit mask is M bits long and
there are more than M sub-identifiers in the
corresponding instance of vacmViewTreeFamilySubtree,
then the bit mask is extended with 1's to be the
required length.
Note that when the value of this object is the
zero-length string, this extension rule results in
a mask of all-1's being used (i.e., no 'wild card'),
and the family of view subtrees is the one view
subtree uniquely identified by the corresponding
instance of vacmViewTreeFamilySubtree.
Note that masks of length greater than zero length
do not need to be supported. In this case this
object is made read-only.
"
-- DEFVAL { ''H }
::= { snmpV3ViewTreeEntry 3 }
snmpV3viewTreeType OBJECT-TYPE
SYNTAX INTEGER { included(1), excluded(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether the corresponding instances of
vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.
"
-- DEFVAL { included }
::= { snmpV3ViewTreeEntry 4 }
snmpV3viewTreeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.
"
::= { snmpV3ViewTreeEntry 5 }
-- ----------------------------------------------------------------
-- The snmpV3Community group
-- ----------------------------------------------------------------
snmpV3CommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3CommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3Community 1 }
snmpV3CommunityEntry OBJECT-TYPE
SYNTAX SnmpV3CommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3CommunityName }
::= { snmpV3CommunityTable 1 }
SnmpV3CommunityEntry ::= SEQUENCE
{
snmpV3CommunityName OCTET STRING,
snmpV3CommunityPolicy SnmpAdminString,
snmpV3CommunityStatus RowStatus
}
snmpV3CommunityName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique index value of a row in this table."
::= { snmpV3CommunityEntry 1 }
snmpV3CommunityPolicy OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A human readable string representing the corresponding
value of snmpCommunityName in a Security Model
independent format."
::= { snmpV3CommunityEntry 2 }
snmpV3CommunityStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the
snmpCommunityTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpCommunityStatus is active(1)."
::= { snmpV3CommunityEntry 3 }
-- ----------------------------------------------------------------
-- The snmpV3Host group
-- ----------------------------------------------------------------
snmpV3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpV3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { snmpV3Host 1 }
snmpV3HostEntry OBJECT-TYPE
SYNTAX SnmpV3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { snmpV3HostAddress }
::= { snmpV3HostTable 1 }
SnmpV3HostEntry ::= SEQUENCE
{
snmpV3HostAddress IpAddress,
snmpV3HostCommunityName SnmpAdminString,
snmpV3HostVersion INTEGER,
snmpV3HostStatus RowStatus
}
snmpV3HostAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry."
::= { snmpV3HostEntry 1 }
snmpV3HostCommunityName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The locally arbitrary."
::= { snmpV3HostEntry 2 }
snmpV3HostVersion OBJECT-TYPE
SYNTAX INTEGER {
v1 (1),
v2c (2),
v3NoAuthNoPriv (3),
v3AuthNoPriv (4),
v3AuthPriv (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Level of Security to be used when generating
SNMP messages using this entry."
::= { snmpV3HostEntry 3 }
snmpV3HostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { snmpV3HostEntry 4 }
-- ----------------------------------------------------------------
-- The snmpV3Trap group
-- ----------------------------------------------------------------
snmpV3TrapSNMPAuthentication OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling SNMP login fail
event trap in the system."
::= { snmpV3Trap 1 }
snmpV3TrapBootup OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling devie Bootup event
trap in the system."
::= { snmpV3Trap 2 }
snmpV3TrapFiberLinkUpDown OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Fiber link up / link down
event trap in the system."
::= { snmpV3Trap 3 }
snmpV3TrapCopperLinkUpDown OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Copper link up / link down
event trap in the system."
::= { snmpV3Trap 4 }
snmpV3TrapRSTPStateChange OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling RSTP topology change
event trap in the system."
::= { snmpV3Trap 5 }
snmpV3TrapFirmUpgrade OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Firmware upgrade
suess or fail event trap in the system."
::= { snmpV3Trap 6 }
-- ------------------------------------------------------------------
-- companySyslog
-- ------------------------------------------------------------------
syslogSettingGroup OBJECT IDENTIFIER ::= { companySyslog 1 }
syslogEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling syslog alert features in
the system and the syslog will save to flash or send to remote
syslog server.
System Logs record and manage events, as well as report errors and
informational messages."
DEFVAL { disable }
::= { syslogSettingGroup 1 }
syslogSaveMode OBJECT-TYPE
SYNTAX INTEGER {
onDemand(0),
timeInterval(1),
logTrigger(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for choosing the method to save syslog into flash."
DEFVAL { logTrigger }
::= { syslogSettingGroup 2 }
syslogSaveMinutes OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When savemode is time interval, it's used to set the interval minutes of
system save syslog to flash."
DEFVAL { 30 }
::= { syslogSettingGroup 3 }
-- ------------------------------------------------------------------
-- smtpRecvMailAddrTable
-- ------------------------------------------------------------------
syslogServerGroup OBJECT IDENTIFIER ::= { companySyslog 2 }
syslogServTable OBJECT-TYPE
SYNTAX SEQUENCE OF SyslogServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of syslog remote server."
::= { syslogServerGroup 1 }
syslogServEntry OBJECT-TYPE
SYNTAX SyslogServEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of syslog remote server entry."
INDEX { syslogServIndex }
::= { syslogServTable 1 }
SyslogServEntry ::=
SEQUENCE {
syslogServIndex INTEGER,
syslogServAddr IpAddress,
syslogServSeverity INTEGER,
syslogServFacility INTEGER,
syslogServUDPport INTEGER,
syslogServSrvStatus INTEGER,
syslogServSrvRowStatus RowStatus
}
syslogServIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of syslog remote server."
::= { syslogServEntry 1 }
syslogServAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address of syslog remote server."
::= { syslogServEntry 2 }
syslogServSeverity OBJECT-TYPE
SYNTAX INTEGER{
warning(4), -- For logging warning messages.
information(6), -- For logging informational messages.
all(7) -- For logging debug messages.
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the log level option to be set for a specific server."
::= { syslogServEntry 3 }
syslogServFacility OBJECT-TYPE
SYNTAX INTEGER {
local0(128), -- Reserved local use
local1(136), -- Reserved local use
local2(144), -- Reserved local use
local3(152), -- Reserved local use
local4(160), -- Reserved local use
local5(168), -- Reserved local use
local6(176), -- Reserved local use
local7(184) -- Reserved local use
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Syslog standard facilities.
The facility to be used when sending Syslog messages to this server."
DEFVAL { local0 }
::= { syslogServEntry 4 }
syslogServUDPport OBJECT-TYPE
SYNTAX INTEGER (514 | 6000..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is for setting UDP Port."
::= { syslogServEntry 5 }
syslogServSrvStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status for this server. If enable, system will send message to
this server."
::= { syslogServEntry 6 }
syslogServSrvRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status of this server entry."
::= { syslogServEntry 7 }
-- LBD Group ------------------------------------------------------
sysLBDStateEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Loopback detection function.
The Loopback Detection function is used to detect the loop created
by a specific port while Spanning Tree Protocol (STP) is not
enabled in the network, especially when the down links are hubs
or unmanaged switchs.The Switch will automatically shutdown the
port and sends a log to the administrator."
DEFVAL { disabled }
::= { companyLBD 1 }
sysLBDInterval OBJECT-TYPE
SYNTAX Integer32 (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a Loop detection Interval between 1 and 32767 seconds.
The default is 2 seconds.
This time interval to be used at counting time seconds to
resend the CTP packet automatically."
DEFVAL { 2 }
::= { companyLBD 2 }
sysLBDRecoverTime OBJECT-TYPE
SYNTAX Integer32 (0 | 60..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This time interval to be used at counting time seconds to
recover the disabled port automatically.
The Loop Detection Recover Time can be set at 0 seconds,
or 60 to 1000000 seconds.
Entering 0 will disable the Loop Detection Recover Time.
The default is 60 seconds."
DEFVAL { 60 }
::= { companyLBD 3 }
-- LBD Port Control Table
sysLBDCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLBDCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control Loopback detection features either for
the entire switch or for each interface in the switch."
::= { companyLBD 4 }
sysLBDCtrlEntry OBJECT-TYPE
SYNTAX SysLBDCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { sysLBDCtrlIndex }
::= { sysLBDCtrlTable 1 }
SysLBDCtrlEntry ::=
SEQUENCE {
sysLBDCtrlIndex
Integer32,
sysLBDPortStatus
INTEGER,
sysLBDPortLoopStatus
INTEGER
}
sysLBDCtrlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the port for which the configuration
in this entry applies."
::= { sysLBDCtrlEntry 1 }
sysLBDPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to per port enable or disable the loopback detection
function. Default is disabled."
DEFVAL { disabled }
::= { sysLBDCtrlEntry 2 }
sysLBDPortLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The loop status for this port."
::= { sysLBDCtrlEntry 3 }
-- ------------------------------------------------------------------
-- Mirror Group
-- ------------------------------------------------------------------
sysMirrorStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Port Mirroring function.
Default is disabled.
Port Mirroring is a method of monitoring network traffic that
forwards a copy of each incoming and/or outgoing packet from one
port of the Switch to another port where the packet can be studied."
-- "Provides control over the mirroring feature in the switch." --
DEFVAL { disabled }
::= { companyMirror 1 }
sysMirrorTargetPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port to which the mirrored traffic in the system
is to be copied."
::= { companyMirror 2 }
sysMirrorCtrlIngressMirroring OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring of ingress
traffic over this interface to the mirrored-to port."
::= { companyMirror 3 }
sysMirrorCtrlEgressMirroring OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to enable or disable mirroring of egress
traffic over this interface to the mirrored-to port."
::= { companyMirror 4 }
-- ------------------------------------------------------------------
-- trap setting
sysTrapIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The smart console utility's IP address is used to recive trap events."
::= { companyTrapSetting 1 }
sysTrapSystemEvent OBJECT-TYPE
SYNTAX INTEGER {
none(0),
deviceBootUp(1),
illegalLogin(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable system trap events in the switch system."
DEFVAL { none }
::= { companyTrapSetting 2 }
sysTrapFiberPortEvent OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable fiber port trap event in the system."
DEFVAL { disable }
::= { companyTrapSetting 3 }
sysTrapTwistedPortEvent OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable twisted port trap event in the system."
DEFVAL { disable }
::= { companyTrapSetting 4 }
sysTrapStateChangeEvent OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable RSTP state change trap event in the system."
DEFVAL { disable }
::= { companyTrapSetting 5 }
sysTrapFirmUpgradeEvent OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable firmware upgrading trap event in the system."
DEFVAL { disable }
::= { companyTrapSetting 6 }
sysTrapStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable trap event in the system."
DEFVAL { disable }
::= { companyTrapSetting 10 }
-- ------------------------------------------------------------------
-- SNTP Timesetting
-- ------------------------------------------------------------------
sysSNTPTimeSeconds OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for setting the system time in seconds
from Epoch (00:00:00 UTC, January 1, 2009). Notice :
input value must larger than 1230768000 (00:00:00 UTC,
January 1, 2009) and smaller than 2145916799 (23:59:59
UTC, December 31, 2037)."
::= { companySNTPSetting 1 }
sysSNTPFirstServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP First Server's IP Address"
::= { companySNTPSetting 2 }
sysSNTPSecondServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP Second Server's IP Address"
::= { companySNTPSetting 3 }
sysSNTPPollInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SNTP Poll Interval In Seconds (30-99999) "
::= { companySNTPSetting 4 }
sysSNTPState OBJECT-TYPE
SYNTAX INTEGER {
sntp(1),
local(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable SNTP function in the system."
::= { companySNTPSetting 5 }
-- SNTP TimeZonesetting
sysSNTPDSTOffset OBJECT-TYPE
SYNTAX INTEGER {
offset30min (30),
offset60min (60),
offset90min (90),
offset120min (120)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for Daylight Saving Time Offset In (30/60/90/120) Minutes."
::= { companySNTPSetting 6 }
sysSNTPGMTMinutes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)"
::= { companySNTPSetting 7 }
sysSNTPDSTStartMon OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start month of Daylight Saving Time."
::= { companySNTPSetting 8 }
sysSNTPDSTStartDay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start day of Daylight Saving Time."
::= { companySNTPSetting 9 }
sysSNTPDSTStartHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start hour of Daylight Saving Time."
::= { companySNTPSetting 10 }
sysSNTPDSTStartMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start minute of Daylight Saving Time."
::= { companySNTPSetting 11 }
sysSNTPDSTEndMon OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end month of Daylight Saving Time."
::= { companySNTPSetting 12 }
sysSNTPDSTEndDay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end day of Daylight Saving Time."
::= { companySNTPSetting 13 }
sysSNTPDSTEndHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end hour of Daylight Saving Time."
::= { companySNTPSetting 14 }
sysSNTPDSTEndMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end minute of Daylight Saving Time."
::= { companySNTPSetting 15 }
sysSNTPDSTState OBJECT-TYPE
SYNTAX INTEGER {
annual(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for Annual(1) or Disabled(2) DST state in the system."
::= { companySNTPSetting 16 }
-- ---------------------------------------------------------------------
-- voicevlan Function
-- ---------------------------------------------------------------------
voicevlanSystem OBJECT IDENTIFIER ::= { companyVoiceVlan 1 }
voicevlanOUI OBJECT IDENTIFIER ::= { companyVoiceVlan 2 }
-- ------------------------------------------------------------------
-- The Voice Vlan Group
-- ------------------------------------------------------------------
voiceVlanMode OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Voice VLAN is a feature that allows you to automatically place
the voice traffic from IP phone to an assigned VLAN to enhance
the VoIP service.
This object is for enabling or disabling Voice Vlan function
in the system.
If the Vlan mode is in Asymmetric VLAN mode, Voice VLAN can not
be enabled."
::= { voicevlanSystem 2 }
voiceVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of VLAN that you want the voice traffic to be in.
It must be a exist vlan id."
::= { voicevlanSystem 3 }
voiceVlanTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A period of time in hour to remove a port from voice VLAN
if the port is an automatic VLAN member.
The Timeout range is 1~120 hours.
Default aging time is 1 hour."
::= { voicevlanSystem 4}
voiceVlanPriority OBJECT-TYPE
SYNTAX INTEGER { highest(0), high(1), medium(2), low(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1p priority levels of the traffic in the Voice VLAN."
::= { voicevlanSystem 5}
--
-- Voice Vlan Port Control Table
--
voicevlanPortControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoiceVlanPortControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Voice Vlan Port Control
configuration information."
::= { voicevlanSystem 6 }
voicevlanPortControlEntry OBJECT-TYPE
SYNTAX VoiceVlanPortControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Voice Vlan Control configuration
parameters for each Port on this device."
INDEX { voicevlanPortControlIndex }
::= { voicevlanPortControlTable 1 }
VoiceVlanPortControlEntry ::=
SEQUENCE {
voicevlanPortControlIndex
InterfaceIndex,
voicevlanPortAutoDetection
INTEGER,
voicevlanPortState
INTEGER
}
voicevlanPortControlIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The voice vlan port index."
::= { voicevlanPortControlEntry 1 }
voicevlanPortAutoDetection OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Voice Vlan Auto
Detection in the port.
If the auto detection is enable, switch will add this port
to the voice VLAN automatically if it detects the device OUI
matches the Telephony OUI.
If the port is a static member of voice vlan or a LA member,
it can not enable voice vlan auto detection."
::= { voicevlanPortControlEntry 2 }
voicevlanPortState OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dynamic(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates Voice vlan state to this Port.
manual - this port is a static member of voice vlan.
dynamic - this port is a dynamic member of voice vlan.
none - this port is not a member of voice vlan."
::= { voicevlanPortControlEntry 3 }
-- ------------------------------------------------------------------
-- The Voice Vlan OUI Group
-- ------------------------------------------------------------------
--
-- Voice Vlan OUI Table
--
voicevlanOUITable OBJECT-TYPE
SYNTAX SEQUENCE OF VoicevlanOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A voice vlan OUI entry containing the description and mac."
::= { voicevlanOUI 1 }
voicevlanOUIEntry OBJECT-TYPE
SYNTAX VoicevlanOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A voice vlan OUI entry containing the description and mac."
INDEX { voicevlanOUITelephonyOUI }
::= { voicevlanOUITable 1 }
VoicevlanOUIEntry ::=
SEQUENCE {
voicevlanOUITelephonyOUI MacAddress,
voicevlanOUIDescription OCTET STRING,
voicevlanOUIMask MacAddress,
voicevlanOUIStatus RowStatus
}
voicevlanOUITelephonyOUI OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Organizationally Unique Identifier (OUI) is a 24-bit number
that is purchased from the IEEE Registration Authority. This identifier
uniquely identifies a vendor, manufacturer, or other organization.
This object indicates the voice traffic's OUI that user created."
::= { voicevlanOUIEntry 1 }
voicevlanOUIDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Description for the OUI."
::= { voicevlanOUIEntry 2 }
voicevlanOUIMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voice vlan OUI Mask. Always be FF:FF:FF:00:00:00."
::= { voicevlanOUIEntry 3 }
voicevlanOUIStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
To create a new entry, you must set the voicevlanOUIStatus
to be CreateAndGo, then this entry will turn to be Active."
::= { voicevlanOUIEntry 4 }
-- ---------------------------------------------------------------------
-- Auto Surveillance Vlan Function
-- ---------------------------------------------------------------------
autoSurveillanceVlanSystem OBJECT IDENTIFIER ::= { companyAutoSurveillanceVlan 1 }
autoSurveillanceVlanOUI OBJECT IDENTIFIER ::= { companyAutoSurveillanceVlan 2 }
-- ------------------------------------------------------------------
-- The Auto Surveillance Vlan Group
-- ------------------------------------------------------------------
autoSurveillanceVlanMode OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling Auto Surveillance Vlan function
in the system.
If the Vlan mode is in Asymmetric VLAN mode, Auto Surveillance VLAN can not
be enabled."
::= { autoSurveillanceVlanSystem 1 }
autoSurveillanceVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of VLAN that you want the surveillance traffic to be in.
It must be a exist vlan id."
::= { autoSurveillanceVlanSystem 2 }
autoSurveillanceVlanPriority OBJECT-TYPE
SYNTAX INTEGER { highest(0), high(1), medium(2), low(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1p priority levels of the traffic in the Auto Surveillance VLAN."
::= { autoSurveillanceVlanSystem 3}
autoSurveillanceVlanTaggedUplinkDownlinkPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto Surveillance vlan uplink ports can't auto learning OUI."
::= { autoSurveillanceVlanSystem 4 }
-- ------------------------------------------------------------------
-- The Auto Surveillance Vlan OUI Group
-- ------------------------------------------------------------------
--
-- Auto Surveillance Vlan OUI Table
--
autoSurveillanceVlanOUITable OBJECT-TYPE
SYNTAX SEQUENCE OF AutoSurveillanceVlanOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Auto Surveillance vlan OUI entry containing the description and mac."
::= { autoSurveillanceVlanOUI 1 }
autoSurveillanceVlanOUIEntry OBJECT-TYPE
SYNTAX AutoSurveillanceVlanOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Auto Surveillance vlan OUI entry containing the description and mac."
INDEX { autoSurveillanceVlanOUISurveillanceOUI }
::= { autoSurveillanceVlanOUITable 1 }
AutoSurveillanceVlanOUIEntry ::=
SEQUENCE {
autoSurveillanceVlanOUISurveillanceOUI MacAddress,
autoSurveillanceVlanOUIDescription OCTET STRING,
autoSurveillanceVlanOUIMask MacAddress,
autoSurveillanceVlanOUIStatus RowStatus,
autoSurveillanceVlanOUIComponentType INTEGER
}
autoSurveillanceVlanOUISurveillanceOUI OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Organizationally Unique Identifier (OUI) is a 24-bit number
that is purchased from the IEEE Registration Authority. This identifier
uniquely identifies a vendor, manufacturer, or other organization.
This object indicates the surveillance traffic's OUI that user created."
::= { autoSurveillanceVlanOUIEntry 1 }
autoSurveillanceVlanOUIDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Description for the OUI."
::= { autoSurveillanceVlanOUIEntry 2 }
autoSurveillanceVlanOUIMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto Surveillance vlan OUI Mask.
The default OUI Mask is FF:FF:FF:F0:00:00. And default OUI Mask is read-only.
In user define OUI's Mask is FF:FF:FF:00:00:00, in user define MAC's Mask is FF:FF:FF:FF:FF:FF."
::= { autoSurveillanceVlanOUIEntry 3 }
autoSurveillanceVlanOUIComponentType OBJECT-TYPE
SYNTAX INTEGER {
video-Management-Server(0),
vMS-Client(1),
video-Encoder(2),
network-Storage(3),
other-IP-Surveillance-Devices(4),
d-Link-Surveillance-Device(5)
} MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Component Type of this entry.
To create a new entry, you must set the autoSurveillanceVlanOUIComponentType
to be CreateAndGo, then this entry will turn to be Active."
::= { autoSurveillanceVlanOUIEntry 4 }
autoSurveillanceVlanOUIStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
To create a new entry, you must set the autoSurveillanceVlanOUIStatus
to be CreateAndGo, then this entry will turn to be Active."
::= { autoSurveillanceVlanOUIEntry 5 }
-- -----------------------------------------------------------------------------
-- The Guest Vlan Group
-- -----------------------------------------------------------------------------
guestVlanName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN name of guest VLAN."
::= { companyGuestVlan 1 }
guestVlanPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the guest VLAN port members of this device."
::= { companyGuestVlan 2 }
guestVlanDelState OBJECT-TYPE
SYNTAX INTEGER{
none(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to delete the guest VLAN."
::= { companyGuestVlan 3 }
-- ---------------------------------------------------------------------
-- MacNotify Function
-- ---------------------------------------------------------------------
macNotifyState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can enabled or disabled MAC Notification."
::= { companyMacNotify 1 }
macNotifyInterval OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the time interval in second for trigger the MAC notify message. "
--DEFVAL { 1 }
::= { companyMacNotify 2 }
macNotifyHistorySize OBJECT-TYPE
SYNTAX INTEGER (1..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the history size of variation MAC in address table. The default value is 1 ."
--DEFVAL { 1 }
::= { companyMacNotify 3 }
-- Mac Notify Port Control Table
macNotifyCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacNotifyCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control Loopback detection features either for
the entire switch or for each interface in the switch."
::= { companyMacNotify 4 }
macNotifyCtrlEntry OBJECT-TYPE
SYNTAX MacNotifyCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { macNotifyCtrlIndex }
::= { macNotifyCtrlTable 1 }
MacNotifyCtrlEntry ::=
SEQUENCE {
macNotifyCtrlIndex
Integer32,
macNotifyPortStatus
INTEGER
}
macNotifyCtrlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the port for which the configuration
in this entry applies."
::= { macNotifyCtrlEntry 1 }
macNotifyPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provides control to per port enable or disable the loopback detection
function. Default is disabled."
DEFVAL { disabled }
::= { macNotifyCtrlEntry 2 }
--
-- LLDP Settings
--
dlinklldpState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling or disabling LLDP in the system."
DEFVAL { disable }
::= { companyLLDPSetting 1 }
dlinklldpMsgHoldMultiplier OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time-to-live value expressed as a multiple of the
lldpMessageTxInterval object.The actual time-to-live value
used in LLDP frames, transmitted on behalf of this LLDP agent,
can be expressed by the following formula: TTL = min(65535,
(lldpMessageTxInterval * lldpMessageTxHoldMultiplier))"
--DEFVAL { 4 }
::= { companyLLDPSetting 2 }
dlinklldpMsgTxInterval OBJECT-TYPE
SYNTAX INTEGER (5..32768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for LLDP packet update frequency.
The timer in units of seconds."
--DEFVAL { 30 }
::= { companyLLDPSetting 3 }
dlinklldpReinitDelay OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for LLDP Reinitialization Delay.
The timer in units of seconds."
--DEFVAL { 2 }
::= { companyLLDPSetting 4 }
dlinklldpTxDelay OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)."
--DEFVAL { 2 }
::= { companyLLDPSetting 5 }
--
-- lldpManAddrConfigTxPortsTable : selection of management addresses
-- to be transmitted on a specified set
-- of ports.
--
dlinklldpConfigManAddrPortsTxEnable OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of ports that are identified by a PortList, in which
each port is represented as a bit. The corresponding local
system management address instance will be transmitted on the
member ports of the lldpManAddrPortsTxEnable.
The default value for lldpConfigManAddrPortsTxEnable object
is empty binary string, which means no ports are specified
for advertising indicated management address instance."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
::= { companyLLDPSetting 6 }
--
-- D-Link Defined LLDP Port Configuration Table
--
-- textual conventions
LldpPortNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Each port contained in the chassis (that is known to the
LLDP agent) is uniquely identified by a port number.
A port number has no mandatory relationship to an
InterfaceIndex object (of the interfaces MIB, IETF RFC 2863).
If the LLDP agent is a IEEE 802.1D, IEEE 802.1Q bridge, the
LldpPortNumber will have the same value as the dot1dBasePort
object (defined in IETF RFC 1493) associated corresponding
bridge port. If the system hosting LLDP agent is not an
IEEE 802.1D or an IEEE 802.1Q bridge, the LldpPortNumber
will have the same value as the corresponding interface's
InterfaceIndex object.
Port numbers should be in the range of 1 and 4096 since a
particular port is also represented by the corresponding
port number bit in LldpPortList."
SYNTAX Integer32(1..4096)
-- textual conventions end
lldpPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls LLDP frame transmission on individual
ports."
::= { companyLLDPSetting 11 }
lldpPortConfigEntry OBJECT-TYPE
SYNTAX LldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table."
INDEX { lldpPortConfigPortNum }
::= { lldpPortConfigTable 1 }
LldpPortConfigEntry ::= SEQUENCE {
lldpPortConfigPortNum LldpPortNumber,
lldpPortConfigAdminStatus INTEGER,
lldpPortConfigNotificationEnable TruthValue,
lldpPortConfigTLVsTxEnable BITS }
lldpPortConfigPortNum OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpPortConfigTable."
::= { lldpPortConfigEntry 1 }
lldpPortConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
txOnly(1),
rxOnly(2),
txAndRx(3),
disabled(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively desired status of the local LLDP agent.
If the associated lldpPortConfigAdminStatus object has a
value of 'txOnly(1)', then LLDP agent will transmit LLDP
frames on this port and it will not store any information
about the remote systems connected.
If the associated lldpPortConfigAdminStatus object has a
value of 'rxOnly(2)', then the LLDP agent will receive,
but it will not transmit LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'txAndRx(3)', then the LLDP agent will transmit
and receive LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'disabled(4)', then LLDP agent will not transmit or
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
other tables, before the port's lldpPortConfigAdminStatus
becomes disabled, then the information will naturally age out."
REFERENCE
"IEEE 802.1AB-2005 10.5.1"
DEFVAL { txAndRx }
::= { lldpPortConfigEntry 2 }
lldpPortConfigNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpPortConfigNotificationEnable controls, on a per
port basis, whether or not notifications from the agent
are enabled. The value true(1) means that notifications are
enabled; the value false(2) means that they are not."
DEFVAL { false }
::= { lldpPortConfigEntry 3 }
lldpPortConfigTLVsTxEnable OBJECT-TYPE
SYNTAX BITS {
portDesc(0),
sysName(1),
sysDesc(2),
sysCap(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpPortConfigTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated
with a specific optional TLV.
It should be noted that the organizationally-specific TLVs
are excluded from the lldpTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object, lldpConfigManAddrTable.
The default value for lldpPortConfigTLVsTxEnable object is
empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
-- DEFVAL { { } }
::= { lldpPortConfigEntry 4 }
--
-- D-Link Defined LLDP Extension Dot3 MIB Objects
--
lldpXdot3Objects OBJECT IDENTIFIER ::= { companyLLDPSetting 12 }
-- LLDP IEEE 802.3 extension MIB groups
lldpXdot3Config OBJECT IDENTIFIER ::= { lldpXdot3Objects 1 }
lldpXdot3LocalData OBJECT IDENTIFIER ::= { lldpXdot3Objects 2 }
lldpXdot3RemoteData OBJECT IDENTIFIER ::= { lldpXdot3Objects 3 }
-- textual conventions
LldpPowerPortClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the Power over Ethernet (PoE) port class."
SYNTAX INTEGER {
pClassPSE(1),
pClassPD(2)
}
LldpLinkAggStatusMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the link aggregation status.
The bit 'aggCapable(0)' indicates the link is capable of being
aggregated.
The bit 'aggEnabled(1)' indicates the link is currently in
aggregation."
SYNTAX BITS {
aggCapable(0),
aggEnabled(1)
}
------------------------------------------------------------------------------
-- IEEE 802.3 - Configuration
------------------------------------------------------------------------------
lldpXdot3PortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3PortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that controls selection of LLDP TLVs to be transmitted
on individual ports."
::= { lldpXdot3Config 1 }
lldpXdot3PortConfigEntry OBJECT-TYPE
SYNTAX LldpXdot3PortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpXdot3PortConfigEntry must be from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system."
AUGMENTS { lldpPortConfigEntry }
::= { lldpXdot3PortConfigTable 1 }
LldpXdot3PortConfigEntry ::= SEQUENCE {
lldpXdot3PortConfigTLVsTxEnable BITS
}
lldpXdot3PortConfigTLVsTxEnable OBJECT-TYPE
SYNTAX BITS {
macPhyConfigStatus(0),
powerViaMDI(1),
linkAggregation(2),
maxFrameSize(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV. The bit 0 is not used since there is
no corresponding subtype.
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that LLDP agent should
transmit 'Power via MDI TLV'.
The bit 'linkAggregation(2)' indicates that LLDP agent should
transmit 'Link Aggregation TLV'.
The bit 'maxFrameSize(3)' indicates that LLDP agent should
transmit 'Maximum-frame-size TLV'.
The default value for lldpXdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
-- DEFVAL { { } }
::= { lldpXdot3PortConfigEntry 1 }
------------------------------------------------------------------------------
-- IEEE 802.3 - Local Device Information
------------------------------------------------------------------------------
---
--- lldpXdot3LocPortTable: Ethernet Port AutoNeg/Speed/Duplex
--- Information Table
---
---
lldpXdot3LocPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 1 }
lldpXdot3LocPortEntry OBJECT-TYPE
SYNTAX LldpXdot3LocPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot3LocPortAutoNegSupported }
::= { lldpXdot3LocPortTable 1 }
LldpXdot3LocPortEntry ::= SEQUENCE {
lldpXdot3LocPortAutoNegSupported TruthValue,
lldpXdot3LocPortAutoNegEnabled TruthValue,
lldpXdot3LocPortAutoNegAdvertisedCap OCTET STRING,
lldpXdot3LocPortOperMauType Integer32
}
lldpXdot3LocPortAutoNegSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3LocPortEntry 1 }
lldpXdot3LocPortAutoNegEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3LocPortEntry 2 }
lldpXdot3LocPortAutoNegAdvertisedCap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.2.2"
::= { lldpXdot3LocPortEntry 3 }
lldpXdot3LocPortOperMauType OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero."
REFERENCE
"IEEE 802.1AB-2005 G.2.3"
::= { lldpXdot3LocPortEntry 4 }
---
---
--- lldpXdot3LocPowerTable: Power Ethernet Information Table
---
---
lldpXdot3LocPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of power ethernet
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 2 }
lldpXdot3LocPowerEntry OBJECT-TYPE
SYNTAX LldpXdot3LocPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot3LocPowerPortClass }
::= { lldpXdot3LocPowerTable 1 }
LldpXdot3LocPowerEntry ::= SEQUENCE {
lldpXdot3LocPowerPortClass LldpPowerPortClass,
lldpXdot3LocPowerMDISupported TruthValue,
lldpXdot3LocPowerMDIEnabled TruthValue,
lldpXdot3LocPowerPairControlable TruthValue,
lldpXdot3LocPowerPairs Integer32,
lldpXdot3LocPowerClass Integer32
}
lldpXdot3LocPowerPortClass OBJECT-TYPE
SYNTAX LldpPowerPortClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that identifies the port Class of the given port
associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 1 }
lldpXdot3LocPowerMDISupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the MDI power is
supported on the given port associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 2 }
lldpXdot3LocPowerMDIEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to identify whether MDI power is
enabled on the given port associated with the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 3 }
lldpXdot3LocPowerPairControlable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3LocPowerEntry 4 }
lldpXdot3LocPowerPairs OBJECT-TYPE
SYNTAX Integer32(1|2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.2"
::= { lldpXdot3LocPowerEntry 5 }
lldpXdot3LocPowerClass OBJECT-TYPE
SYNTAX Integer32(1|2|3|4|5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system."
REFERENCE
"IEEE 802.1AB-2005 G.3.3"
::= { lldpXdot3LocPowerEntry 6 }
---
---
--- lldpXdot3LocLinkAggTable: Link Aggregation Information Table
---
---
lldpXdot3LocLinkAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of link aggregation
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 3 }
lldpXdot3LocLinkAggEntry OBJECT-TYPE
SYNTAX LldpXdot3LocLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Link Aggregation information about a particular port
component."
INDEX { lldpXdot3LocLinkAggStatus }
::= { lldpXdot3LocLinkAggTable 1 }
LldpXdot3LocLinkAggEntry ::= SEQUENCE {
lldpXdot3LocLinkAggStatus LldpLinkAggStatusMap,
lldpXdot3LocLinkAggPortId Integer32
}
lldpXdot3LocLinkAggStatus OBJECT-TYPE
SYNTAX LldpLinkAggStatusMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link."
REFERENCE
"IEEE 802.1AB-2005 G.4.1"
::= { lldpXdot3LocLinkAggEntry 1 }
lldpXdot3LocLinkAggPortId OBJECT-TYPE
SYNTAX Integer32(0|1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.
If the port is not in link aggregation state and/or it
does not support link aggregation, this value should be set
to zero."
REFERENCE
"IEEE 802.1AB-2005 G.4.2"
::= { lldpXdot3LocLinkAggEntry 2 }
---
---
--- lldpXdot3LocMaxFrameSizeTable: Maximum Frame Size information
---
---
lldpXdot3LocMaxFrameSizeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent."
::= { lldpXdot3LocalData 4 }
lldpXdot3LocMaxFrameSizeEntry OBJECT-TYPE
SYNTAX LldpXdot3LocMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maximum Frame Size information about a particular port
component."
INDEX { lldpXdot3LocMaxFrameSize }
::= { lldpXdot3LocMaxFrameSizeTable 1 }
LldpXdot3LocMaxFrameSizeEntry ::= SEQUENCE {
lldpXdot3LocMaxFrameSize Integer32
}
lldpXdot3LocMaxFrameSize OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value indicating the maximum supported frame
size in octets on the given port of the local system."
REFERENCE
"IEEE 802.1AB-2005 G.5.1"
::= { lldpXdot3LocMaxFrameSizeEntry 1 }
------------------------------------------------------------------------------
-- IEEE 802.3 - Remote Devices Information
------------------------------------------------------------------------------
---
---
--- lldpXdot3RemPortTable: Ethernet Information Table
---
---
lldpXdot3RemPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system."
::= { lldpXdot3RemoteData 1 }
lldpXdot3RemPortEntry OBJECT-TYPE
SYNTAX LldpXdot3RemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection."
INDEX { lldpXdot3RemPortAutoNegSupported }
::= { lldpXdot3RemPortTable 1 }
LldpXdot3RemPortEntry ::= SEQUENCE {
lldpXdot3RemPortAutoNegSupported TruthValue,
lldpXdot3RemPortAutoNegEnabled TruthValue,
lldpXdot3RemPortAutoNegAdvertisedCap OCTET STRING,
lldpXdot3RemPortOperMauType Integer32
}
lldpXdot3RemPortAutoNegSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3RemPortEntry 1 }
lldpXdot3RemPortAutoNegEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.2.1"
::= { lldpXdot3RemPortEntry 2 }
lldpXdot3RemPortAutoNegAdvertisedCap OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.2.2"
::= { lldpXdot3RemPortEntry 3 }
lldpXdot3RemPortOperMauType OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero."
REFERENCE
"IEEE 802.1AB-2005 G.2.3"
::= { lldpXdot3RemPortEntry 4 }
---
---
--- lldpXdot3RemPowerTable: Power Ethernet Information Table
---
---
lldpXdot3RemPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Ethernet power information (as a part
of the LLDP 802.3 organizational extension) of the remote
system."
::= { lldpXdot3RemoteData 2 }
lldpXdot3RemPowerEntry OBJECT-TYPE
SYNTAX LldpXdot3RemPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection."
INDEX { lldpXdot3RemPowerPortClass}
::= { lldpXdot3RemPowerTable 1 }
LldpXdot3RemPowerEntry ::= SEQUENCE {
lldpXdot3RemPowerPortClass LldpPowerPortClass,
lldpXdot3RemPowerMDISupported TruthValue,
lldpXdot3RemPowerMDIEnabled TruthValue,
lldpXdot3RemPowerPairControlable TruthValue,
lldpXdot3RemPowerPairs Integer32,
lldpXdot3RemPowerClass Integer32
}
lldpXdot3RemPowerPortClass OBJECT-TYPE
SYNTAX LldpPowerPortClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that identifies the port Class of the given port
associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 1 }
lldpXdot3RemPowerMDISupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 2 }
lldpXdot3RemPowerMDIEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to identify whether MDI power is
enabled on the given port associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 3 }
lldpXdot3RemPowerPairControlable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.1"
::= { lldpXdot3RemPowerEntry 4 }
lldpXdot3RemPowerPairs OBJECT-TYPE
SYNTAX Integer32(1|2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.2"
::= { lldpXdot3RemPowerEntry 5 }
lldpXdot3RemPowerClass OBJECT-TYPE
SYNTAX Integer32(1|2|3|4|5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.3.3"
::= { lldpXdot3RemPowerEntry 6 }
---
---
--- lldpXdot3RemLinkAggTable: Link Aggregation Information Table
---
---
lldpXdot3RemLinkAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains port link aggregation information
(as a part of the LLDP 802.3 organizational extension)
of the remote system."
::= { lldpXdot3RemoteData 3 }
lldpXdot3RemLinkAggEntry OBJECT-TYPE
SYNTAX LldpXdot3RemLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Link Aggregation information about remote system's port
component."
INDEX { lldpXdot3RemLinkAggStatus }
::= { lldpXdot3RemLinkAggTable 1 }
LldpXdot3RemLinkAggEntry ::= SEQUENCE {
lldpXdot3RemLinkAggStatus LldpLinkAggStatusMap,
lldpXdot3RemLinkAggPortId Integer32
}
lldpXdot3RemLinkAggStatus OBJECT-TYPE
SYNTAX LldpLinkAggStatusMap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link."
REFERENCE
"IEEE 802.1AB-2005 G.4.1"
::= { lldpXdot3RemLinkAggEntry 1 }
lldpXdot3RemLinkAggPortId OBJECT-TYPE
SYNTAX Integer32(0|1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero."
REFERENCE
"IEEE 802.1AB-2005 G.4.2"
::= { lldpXdot3RemLinkAggEntry 2 }
---
---
--- lldpXdot3RemMaxFrameSizeTable: Maximum Frame Size information
---
---
lldpXdot3RemMaxFrameSizeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) of the remote system."
::= { lldpXdot3RemoteData 4 }
lldpXdot3RemMaxFrameSizeEntry OBJECT-TYPE
SYNTAX LldpXdot3RemMaxFrameSizeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maximum Frame Size information about a particular port
component."
INDEX { lldpXdot3RemMaxFrameSize }
::= { lldpXdot3RemMaxFrameSizeTable 1 }
LldpXdot3RemMaxFrameSizeEntry ::= SEQUENCE {
lldpXdot3RemMaxFrameSize Integer32
}
lldpXdot3RemMaxFrameSize OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system."
REFERENCE
"IEEE 802.1AB-2005 G.5.1"
::= { lldpXdot3RemMaxFrameSizeEntry 1 }
--
-- D-Link Defined LLDP Extension Dot1 MIB Objects
--
lldpXdot1Objects OBJECT IDENTIFIER ::= { companyLLDPSetting 13 }
-- LLDP IEEE 802.1 extension MIB groups
lldpXdot1Config OBJECT IDENTIFIER ::= { lldpXdot1Objects 1 }
lldpXdot1LocalData OBJECT IDENTIFIER ::= { lldpXdot1Objects 2 }
lldpXdot1RemoteData OBJECT IDENTIFIER ::= { lldpXdot1Objects 3 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Configuration
------------------------------------------------------------------------------
--
-- lldpXdot1ConfigPortVlanTable : configure the transmission of the
-- Port VLAN-ID TLVs on set of ports.
--
lldpXdot1ConfigPortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that controls selection of LLDP Port VLAN-ID TLVs
to be transmitted on individual ports."
::= { lldpXdot1Config 1 }
lldpXdot1ConfigPortVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigPortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Port
VLAN-ID TLV on LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system."
AUGMENTS { lldpPortConfigEntry }
::= { lldpXdot1ConfigPortVlanTable 1 }
LldpXdot1ConfigPortVlanEntry ::= SEQUENCE {
lldpXdot1ConfigPortVlanTxEnable TruthValue
}
lldpXdot1ConfigPortVlanTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lldpXdot1ConfigPortVlanTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigPortVlanEntry 1 }
--
-- lldpXdot1LocVlanNameTable : VLAN name information about the local system
--
lldpXdot1LocVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per IEEE 802.1Q VLAN
name information on the local system known to this agent."
::= { lldpXdot1LocalData 3 }
lldpXdot1LocVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1LocVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1LocVlanId, configured on the given port."
INDEX { lldpXdot1LocVlanId }
::= { lldpXdot1LocVlanNameTable 1 }
LldpXdot1LocVlanNameEntry ::= SEQUENCE {
lldpXdot1LocVlanId VlanId,
lldpXdot1LocVlanName SnmpAdminString
}
lldpXdot1LocVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible."
REFERENCE
"IEEE 802.1AB-2005 F.4.2"
::= { lldpXdot1LocVlanNameEntry 1 }
lldpXdot1LocVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify VLAN name identified by the
Vlan Id associated with the given port on the local system.
This object should contain the value of the dot1QVLANStaticName
object (defined in IETF RFC 2674) identified with the given
lldpXdot1LocVlanId."
REFERENCE
"IEEE 802.1AB-2005 F.4.4"
::= { lldpXdot1LocVlanNameEntry 2 }
--
-- lldpXdot1ConfigVlanNameTable : configure the transmission of the
-- VLAN name instances on set of ports.
--
lldpXdot1ConfigVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP VLAN name TLV
instances to be transmitted on individual ports."
::= { lldpXdot1Config 2 }
lldpXdot1ConfigVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
VLAN name instance will be transmitted.
This configuration object augments the lldpLocVlanEntry,
therefore it is only present along with the VLAN Name instance
contained in the associated lldpLocVlanNameEntry entry.
Each active lldpXdot1ConfigVlanNameEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocVlanNameEntry) after a re-initialization of the
management system."
AUGMENTS { lldpXdot1LocVlanNameEntry }
::= { lldpXdot1ConfigVlanNameTable 1 }
LldpXdot1ConfigVlanNameEntry ::= SEQUENCE {
lldpXdot1ConfigVlanNameTxEnable TruthValue
}
lldpXdot1ConfigVlanNameTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The boolean value that indicates whether the corresponding
Local System VLAN name instance will be transmitted on the
port defined by the given lldpXdot1LocVlanNameEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigVlanNameEntry 1 }
--
-- lldpXdot1LocProtoVlanTable: Port and Protocol VLAN information
--
lldpXdot1LocProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per Port and Protocol
VLAN information about the local system."
::= { lldpXdot1LocalData 2 }
lldpXdot1LocProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1LocProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port and protocol VLAN ID Information about a particular
port component. There may be multiple port and protocol VLANs,
identified by a particular lldpXdot1LocProtoVlanId, configured
on the given port."
INDEX { lldpXdot1LocProtoVlanId }
::= { lldpXdot1LocProtoVlanTable 1 }
LldpXdot1LocProtoVlanEntry ::= SEQUENCE {
lldpXdot1LocProtoVlanId Integer32,
lldpXdot1LocProtoVlanSupported TruthValue,
lldpXdot1LocProtoVlanEnabled TruthValue
}
lldpXdot1LocProtoVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPVID) or does
not support port and protocol VLAN operation."
REFERENCE
"IEEE 802.1AB-2005 F.3.2"
::= { lldpXdot1LocProtoVlanEntry 1 }
lldpXdot1LocProtoVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the local system) supports port and protocol
VLANs."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1LocProtoVlanEntry 2 }
lldpXdot1LocProtoVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the local system."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1LocProtoVlanEntry 3 }
--
-- lldpXdot1ConfigProtoVlanTable : configure the transmission of the
-- protocol VLAN instances on set
-- of ports.
--
lldpXdot1ConfigProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP Port and Protocol
VLAN ID TLV instances to be transmitted on individual ports."
::= { lldpXdot1Config 3 }
lldpXdot1ConfigProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol VLAN instance will be transmitted.
This configuration object augments the lldpXdot1LocVlanEntry,
therefore it is only present along with the Port and
Protocol VLAN ID instance contained in the associated
lldpXdot1LocVlanEntry entry.
Each active lldpXdot1ConfigProtoVlanEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtoVlanEntry) after a re-initialization of
the management system."
AUGMENTS { lldpXdot1LocProtoVlanEntry }
::= { lldpXdot1ConfigProtoVlanTable 1 }
LldpXdot1ConfigProtoVlanEntry ::= SEQUENCE {
lldpXdot1ConfigProtoVlanTxEnable TruthValue
}
lldpXdot1ConfigProtoVlanTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The boolean value that indicates whether the corresponding
Local System Port and Protocol VLAN instance will
be transmitted on the port defined by the given
lldpXdot1LocProtoVlanEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigProtoVlanEntry 1 }
--
-- lldpXdot1LocProtocolTable : Protocol Identity information
--
lldpXdot1LocProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per protocol identity
information on the local system known to this agent."
REFERENCE
"IEEE 802.1AB-2005 F.5"
::= { lldpXdot1LocalData 4 }
lldpXdot1LocProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1LocProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about particular protocols that are accessible
through the given port component.
There may be multiple protocols, identified by particular
lldpXdot1ProtocolIndex, and lldpLocPortNum."
REFERENCE
"IEEE 802.1AB-2005 F.5"
INDEX { lldpXdot1LocProtocolIndex }
::= { lldpXdot1LocProtocolTable 1 }
LldpXdot1LocProtocolEntry ::= SEQUENCE {
lldpXdot1LocProtocolIndex Integer32,
lldpXdot1LocProtocolId OCTET STRING
}
lldpXdot1LocProtocolIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity."
::= { lldpXdot1LocProtocolEntry 1 }
lldpXdot1LocProtocolId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The octet string value used to identify the protocols
associated with the given port of the local system."
REFERENCE
"IEEE 802.1AB-2005 F.5.3"
::= { lldpXdot1LocProtocolEntry 2 }
--
-- lldpXdot1ConfigProtocolTable : configure the transmission of the
-- protocol instances on set
-- of ports.
--
lldpXdot1ConfigProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1ConfigProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP Protocol
TLV instances to be transmitted on individual ports."
::= { lldpXdot1Config 4 }
lldpXdot1ConfigProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1ConfigProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol instance will be transmitted.
This configuration object augments the lldpXdot1LocProtoEntry,
therefore it is only present along with the Protocol instance
contained in the associated lldpXdot1LocProtoEntry entry.
Each active lldpXdot1ConfigProtocolEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtocolEntry) after a re-initialization of the
management system."
AUGMENTS { lldpXdot1LocProtocolEntry }
::= { lldpXdot1ConfigProtocolTable 1 }
LldpXdot1ConfigProtocolEntry ::= SEQUENCE {
lldpXdot1ConfigProtocolTxEnable TruthValue
}
lldpXdot1ConfigProtocolTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The boolean value that indicates whether the corresponding
Local System Protocol Identity instance will be transmitted
on the port defined by the given lldpXdot1LocProtocolEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB-2005 10.2.1.1"
DEFVAL { false }
::= { lldpXdot1ConfigProtocolEntry 1 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Local System Information
------------------------------------------------------------------------------
lldpXdot1LocTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1LocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent."
::= { lldpXdot1LocalData 1 }
lldpXdot1LocEntry OBJECT-TYPE
SYNTAX LldpXdot1LocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about IEEE 802.1 organizationally defined
LLDP extension."
INDEX { lldpXdot1LocPortVlanId }
::= { lldpXdot1LocTable 1 }
LldpXdot1LocEntry ::= SEQUENCE {
lldpXdot1LocPortVlanId Integer32
}
lldpXdot1LocPortVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the port's VLAN identifier
associated with the local system. A value of zero shall
be used if the system either does not know the PVID or does
not support port-based VLAN operation."
REFERENCE
"IEEE 802.1AB-2005 F.2.1"
::= { lldpXdot1LocEntry 1 }
------------------------------------------------------------------------------
-- IEEE 802.1 - Remote System Information
------------------------------------------------------------------------------
lldpXdot1RemTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per physical network
connection known to this agent. The agent may wish to
ensure that only one lldpXdot1RemEntry is present for
each local port, or it may choose to maintain multiple
lldpXdot1RemEntries for the same local port."
::= { lldpXdot1RemoteData 1 }
lldpXdot1RemEntry OBJECT-TYPE
SYNTAX LldpXdot1RemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port component."
INDEX { lldpXdot1RemPortVlanId }
::= { lldpXdot1RemTable 1 }
LldpXdot1RemEntry ::= SEQUENCE {
lldpXdot1RemPortVlanId Integer32
}
lldpXdot1RemPortVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The integer value used to identify the port's VLAN identifier
associated with the remote system. if the remote system
either does not know the PVID or does not support port-based
VLAN operation, the value of lldpXdot1RemPortVlanId should
be zero."
REFERENCE
"IEEE 802.1AB-2005 F.2.1"
::= { lldpXdot1RemEntry 1 }
lldpXdot1RemProtoVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per Port and Protocol
VLAN information about the remote system, received on the
given port."
::= { lldpXdot1RemoteData 2 }
lldpXdot1RemProtoVlanEntry OBJECT-TYPE
SYNTAX LldpXdot1RemProtoVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port and protocol VLAN name Information about a particular
port component. There may be multiple protocol VLANs,
identified by a particular lldpXdot1RemProtoVlanId, configured
on the remote system."
INDEX { lldpXdot1RemProtoVlanId }
::= { lldpXdot1RemProtoVlanTable 1 }
LldpXdot1RemProtoVlanEntry ::= SEQUENCE {
lldpXdot1RemProtoVlanId Integer32,
lldpXdot1RemProtoVlanSupported TruthValue,
lldpXdot1RemProtoVlanEnabled TruthValue
}
lldpXdot1RemProtoVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.
If port and protocol VLANs are not supported on the given
port associated with the remote system, or if the port is
not enabled with any port and protocol VLAN, the value of
lldpXdot1RemProtoVlanId should be zero."
REFERENCE
"IEEE 802.1AB-2005 F.3.2"
::= { lldpXdot1RemProtoVlanEntry 1 }
lldpXdot1RemProtoVlanSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1RemProtoVlanEntry 2 }
lldpXdot1RemProtoVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system."
REFERENCE
"IEEE 802.1AB-2005 F.3.1"
::= { lldpXdot1RemProtoVlanEntry 3 }
--
-- lldpXdot1RemVlanNameTable : VLAN name information of the remote
-- systems
--
lldpXdot1RemVlanNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per IEEE 802.1Q VLAN
name information about the remote system, received on the
given port."
REFERENCE
"IEEE 802.1AB-2005 F.4"
::= { lldpXdot1RemoteData 3 }
lldpXdot1RemVlanNameEntry OBJECT-TYPE
SYNTAX LldpXdot1RemVlanNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1RemVlanId, received on the given port."
INDEX { lldpXdot1RemVlanId }
::= { lldpXdot1RemVlanNameTable 1 }
LldpXdot1RemVlanNameEntry ::= SEQUENCE {
lldpXdot1RemVlanId VlanId,
lldpXdot1RemVlanName SnmpAdminString
}
lldpXdot1RemVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible."
REFERENCE
"IEEE 802.1AB-2005 F.4.2"
::= { lldpXdot1RemVlanNameEntry 1 }
lldpXdot1RemVlanName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify VLAN name identified by the
VLAN Id associated with the remote system."
REFERENCE
"IEEE 802.1AB-2005 F.4.4"
::= { lldpXdot1RemVlanNameEntry 2 }
--
-- lldpXdot1RemProtocolTable : Protocol information of the remote systems
--
lldpXdot1RemProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpXdot1RemProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per protocol information
about the remote system, received on the given port."
::= { lldpXdot1RemoteData 4 }
lldpXdot1RemProtocolEntry OBJECT-TYPE
SYNTAX LldpXdot1RemProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol information about a particular port component.
There may be multiple protocols, identified by a particular
lldpXdot1ProtocolIndex, received on the given port."
INDEX { lldpXdot1RemProtocolIndex }
::= { lldpXdot1RemProtocolTable 1 }
LldpXdot1RemProtocolEntry ::= SEQUENCE {
lldpXdot1RemProtocolIndex Integer32,
lldpXdot1RemProtocolId OCTET STRING
}
lldpXdot1RemProtocolIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity."
::= { lldpXdot1RemProtocolEntry 1 }
lldpXdot1RemProtocolId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The octet string value used to identify the protocols
associated with the given port of remote system."
REFERENCE
"IEEE 802.1AB-2005 F.5.3"
::= { lldpXdot1RemProtocolEntry 2 }
ipMacPortBinding OBJECT IDENTIFIER ::= { companySecurity 4}
ipMacPortBindingSystemMode OBJECT-TYPE
SYNTAX INTEGER {
disable (0)
,modeARP (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system wide ACL mode in IPMB."
::= { ipMacPortBinding 1 }
ipMacPortBindingTrapLogEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trap event option in IPMB."
::= { ipMacPortBinding 2 }
ipMacPortBindingEnabledPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers which check incoming IP address and
MAC address if issIpMacPortBindingStatus is enable."
::= { ipMacPortBinding 3 }
allowZeroIPPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers which don't check incoming IP address and
MAC address if issIpMacPortBindingStatus is enable."
::= { ipMacPortBinding 4 }
-- IpMacPortBinding Control Table
ipMacPortBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMacPortBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control IP-MAC-Port Binding features either for the entire
switch or for each interface in the switch.
Parameters in this table are valid only when the
'issIpMacPortStatus' for the switch is not 'disabled'."
::= { ipMacPortBinding 5 }
ipMacPortBindingEntry OBJECT-TYPE
SYNTAX IpMacPortBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { ipMacPortBindingIpAddr, ipMacPortBindingMacAddress }
::= { ipMacPortBindingTable 1 }
IpMacPortBindingEntry ::=
SEQUENCE {
ipMacPortBindingIpAddr
IpAddress,
ipMacPortBindingMacAddress
MacAddress,
ipMacPortBindingPortList
PortList,
ipMacPortBindingRowStatus
RowStatus
}
ipMacPortBindingIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'."
::= { ipMacPortBindingEntry 1 }
ipMacPortBindingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Mac Address."
::= { ipMacPortBindingEntry 2 }
ipMacPortBindingPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { ipMacPortBindingEntry 3 }
ipMacPortBindingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { ipMacPortBindingEntry 5 }
-- MAC BLOCK List ------------------------------------------------------
macBlockListTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacBlockListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
::= { ipMacPortBinding 6 }
macBlockListEntry OBJECT-TYPE
SYNTAX MacBlockListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { macBlockListMacAddr,macBlockListVLANID,macBlockListPort }
::= { macBlockListTable 1 }
MacBlockListEntry ::=
SEQUENCE {
macBlockListMacAddr
MacAddress,
macBlockListVLANID
Integer32,
macBlockListPort
Integer32,
macBlockListRowStatus
RowStatus
}
macBlockListMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Blocked Mac Address."
::= { macBlockListEntry 1 }
macBlockListVLANID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Blocked IP."
::= { macBlockListEntry 2 }
macBlockListPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Blocked port."
::= { macBlockListEntry 3 }
macBlockListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { macBlockListEntry 4 }
-- ----------------------------------------------------------
-- The companySecurity Groups
-- ----------------------------------------------------------
securityDhcpServerScreen OBJECT IDENTIFIER ::= { companySecurity 7 }
-- dhcp Server Screen Group --------------------------------------------- --
dhcpServerScreenEnablePortlist OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable DHCP Server Screening port list."
::= { securityDhcpServerScreen 1 }
-- filterDHCPServer Table
filterDHCPServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FilterDHCPServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control filter DHCP Server for the entire
switch or for each interface in the switch."
::= { securityDhcpServerScreen 2 }
filterDHCPServerEntry OBJECT-TYPE
SYNTAX FilterDHCPServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface
in the system."
INDEX { filterDHCPServerIpAddr, filterDHCPServerClientMacAddr }
::= { filterDHCPServerTable 1 }
FilterDHCPServerEntry ::=
SEQUENCE {
filterDHCPServerIpAddr
IpAddress,
filterDHCPServerClientMacAddr
MacAddress,
filterDHCPServerPortList
PortList,
filterDHCPServerRowStatus
RowStatus
}
filterDHCPServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'."
::= { filterDHCPServerEntry 1 }
filterDHCPServerClientMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet Mac Address."
DEFVAL { '000102030405'h }
::= { filterDHCPServerEntry 2 }
filterDHCPServerPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports."
::= { filterDHCPServerEntry 3 }
filterDHCPServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { filterDHCPServerEntry 4 }
securityTrafficSeg OBJECT IDENTIFIER ::= { companySecurity 9}
--
-- Port Map Table
--
trafficSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel"
::= { securityTrafficSeg 1 }
trafficSegEntry OBJECT-TYPE
SYNTAX TrafficSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
port-channel port"
INDEX { trafficSegIfIndex }
::= { trafficSegTable 1 }
TrafficSegEntry ::=
SEQUENCE {
trafficSegIfIndex InterfaceIndex,
trafficSegMemberList PortList
}
trafficSegIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the port-channel(Aggregator's
interface index). "
::= { trafficSegEntry 1 }
trafficSegMemberList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port list of port channel."
::= { trafficSegEntry 2 }
-- ----------------------------------------------------------
-- The companySecurity Groups
-- ----------------------------------------------------------
securityAAC OBJECT IDENTIFIER ::= { companySecurity 10 }
-- -------------------------------------------------------------
-- Authentication Policy and Parameter Settings
-- -------------------------------------------------------------
aacAuthenAdminState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the Access Authentication is enable or
disable."
::= { securityAAC 1}
aacAuthParamResponseTimeout OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout in second for login authentication response."
::= { securityAAC 2 }
aacAuthParamAttempt OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount for login authentication, if login failure exceed,
connection or access would be locked."
::= { securityAAC 3 }
-- -------------------------------------------------------------
-- Application Authentication Settings
-- -------------------------------------------------------------
aacAPAuthMethodGroup OBJECT IDENTIFIER ::= { securityAAC 4 }
aacAPLoginMethod OBJECT IDENTIFIER ::= { aacAPAuthMethodGroup 1 }
aacAPEnableMethod OBJECT IDENTIFIER ::= { aacAPAuthMethodGroup 2 }
aacAPConsoleLoginMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via local
console"
::= { aacAPLoginMethod 1 }
aacAPTelnetLoginMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via telnet."
::= { aacAPLoginMethod 2 }
aacAPSSHLoginMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via SSH."
::= { aacAPLoginMethod 3 }
aacAPHttpLoginMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via HTTP."
::= { aacAPLoginMethod 4 }
aacAPConsoleEnableMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via local
console."
::= { aacAPEnableMethod 1 }
aacAPTelnetEnableMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via telnet."
::= { aacAPEnableMethod 2 }
aacAPSSHEnableMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via SSH."
::= { aacAPEnableMethod 3 }
aacAPHttpEnableMethod OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the way which has to execute authentication while login the
system and the method for authentication.Access system via HTTP."
::= { aacAPEnableMethod 4 }
-- -------------------------------------------------------------
-- Authentication Server Group setting
-- -------------------------------------------------------------
aacServerGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacServerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains informations about server group."
::= { securityAAC 5 }
aacServerGroupEntry OBJECT-TYPE
SYNTAX AacServerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the group including servers."
INDEX { aacServerGroupIndex }
::= { aacServerGroupTable 1 }
AacServerGroupEntry ::=
SEQUENCE {
aacServerGroupIndex
INTEGER,
aacServerGroupName
OCTET STRING,
aacServersInGroup
BITS,
aacServerGroupRowStatus
RowStatus
}
aacServerGroupIndex OBJECT-TYPE
SYNTAX INTEGER (2..9)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that uniquely identifies this SwAACServerGroupEntry ."
::= { aacServerGroupEntry 1 }
aacServerGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A human-readable text string of the method group.
The name is writable only if Group is new created,
which the value of aacServerGroupRowStatus is 'notReady'."
::= { aacServerGroupEntry 2 }
aacServersInGroup OBJECT-TYPE
SYNTAX BITS {
id-1(0),
id-2(1),
id-3(2),
id-4(3),
id-5(4),
id-6(5),
id-7(6),
id-8(7),
id-9(8),
id-10(9),
id-11(10),
id-12(11),
id-13(12),
id-14(13),
id-15(14),
id-16(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of servers in the group, each bit indicates a specified server ID.
The server must be created before including it."
::= { aacServerGroupEntry 3 }
aacServerGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacServerGroupEntry 4 }
-- -------------------------------------------------------------
-- Authentication Server host setting
-- -------------------------------------------------------------
aacServerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacServerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about severs."
::= { securityAAC 6 }
aacServerInfoEntry OBJECT-TYPE
SYNTAX AacServerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the information of server ."
INDEX { aacServerIndex }
::= { aacServerInfoTable 1 }
AacServerInfoEntry ::=
SEQUENCE {
aacServerIndex
INTEGER,
aacServerIPAddr
IpAddress,
aacServerAuthProtocol
INTEGER,
aacServerAuthPort
INTEGER,
aacServerAuthKey
OCTET STRING,
aacServerTimeout
INTEGER,
aacServerRetryCount
INTEGER,
aacServerRowStatus
RowStatus
}
aacServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that uniquely identifies this SwAACServerGroupEntry."
::= { aacServerInfoEntry 1 }
aacServerIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of Server"
::= { aacServerInfoEntry 2 }
aacServerAuthProtocol OBJECT-TYPE
SYNTAX INTEGER{
tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication protocol provided by the Server."
::= { aacServerInfoEntry 3 }
aacServerAuthPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP/IP port ."
::= { aacServerInfoEntry 4 }
aacServerAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..254))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The key used while authentication process."
::= { aacServerInfoEntry 5 }
aacServerTimeout OBJECT-TYPE
SYNTAX INTEGER(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Server response timeout ."
::= { aacServerInfoEntry 6 }
aacServerRetryCount OBJECT-TYPE
SYNTAX INTEGER(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The client retry count ."
::= { aacServerInfoEntry 7 }
aacServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacServerInfoEntry 8 }
-- -------------------------------------------------------------
-- Login Method list table
-- -------------------------------------------------------------
aacLoginMethodListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacLoginMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about Login authentication method
lists."
::= { securityAAC 7 }
aacLoginMethodListEntry OBJECT-TYPE
SYNTAX AacLoginMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Authentication methods."
INDEX { aacLoginMethodListIndex }
::= { aacLoginMethodListTable 1 }
AacLoginMethodListEntry ::=
SEQUENCE {
aacLoginMethodListIndex
INTEGER,
aacLoginMethodListName
OCTET STRING,
aacLoginMethod1
INTEGER,
aacLoginMethod2
INTEGER,
aacLoginMethod3
INTEGER,
aacLoginMethod4
INTEGER,
aacLoginMethodListRowStatus
RowStatus
}
aacLoginMethodListIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that identifies this method list."
::= { aacLoginMethodListEntry 1 }
aacLoginMethodListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A human-readable text string of the method list."
::= { aacLoginMethodListEntry 2 }
aacLoginMethod1 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacLoginMethodListEntry 3 }
aacLoginMethod2 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacLoginMethodListEntry 4 }
aacLoginMethod3 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacLoginMethodListEntry 5 }
aacLoginMethod4 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacLoginMethodListEntry 6 }
aacLoginMethodListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacLoginMethodListEntry 7 }
-- -------------------------------------------------------------
-- Enable Method table
-- -------------------------------------------------------------
aacEnableMethodListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AacEnableMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about Enable authentication method
lists."
::= { securityAAC 8 }
aacEnableMethodListEntry OBJECT-TYPE
SYNTAX AacEnableMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Authentication methods."
INDEX { aacEnableMethodListIndex }
::= { aacEnableMethodListTable 1 }
AacEnableMethodListEntry ::=
SEQUENCE {
aacEnableMethodListIndex
INTEGER,
aacEnableMethodListName
OCTET STRING,
aacEnableMethod1
INTEGER,
aacEnableMethod2
INTEGER,
aacEnableMethod3
INTEGER,
aacEnableMethod4
INTEGER,
aacEnableMethodListRowStatus
RowStatus
}
aacEnableMethodListIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that identifies this method list."
::= { aacEnableMethodListEntry 1 }
aacEnableMethodListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A human-readable text string of the method list."
::= { aacEnableMethodListEntry 2 }
aacEnableMethod1 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacEnableMethodListEntry 3 }
aacEnableMethod2 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacEnableMethodListEntry 4 }
aacEnableMethod3 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacEnableMethodListEntry 5 }
aacEnableMethod4 OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
local(0)
,tacacs-plus(1)
,radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex."
::= { aacEnableMethodListEntry 6 }
aacEnableMethodListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aacEnableMethodListEntry 7 }
-- -------------------------------------------------------------
-- Local Enable Password
-- -------------------------------------------------------------
aacLocalEnablePassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set Local Enable Password."
::= { securityAAC 9 }
-- ------------------------------------------------------------------
-- The SMTP Group
-- ------------------------------------------------------------------
smtpState OBJECT-TYPE
SYNTAX INTEGER { disabled(0),enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable SMTP function."
::= { companySMTP 1 }
smtpServerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP Server's IP Address"
::= { companySMTP 2 }
smtpServerPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP Server's port"
::= { companySMTP 3}
smtpSelfMailAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The sender's (DUT) mail address ."
::= { companySMTP 4 }
-- ------------------------------------------------------------------
-- smtpRecvMailAddrTable
-- ------------------------------------------------------------------
smtpRecvMailAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpRecvMailAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Receivers' mail address table."
::= { companySMTP 5 }
smtpRecvMailAddrEntry OBJECT-TYPE
SYNTAX SmtpRecvMailAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Receivers' mail address entry."
INDEX { smtpRecvMailAddrIndex }
::= { smtpRecvMailAddrTable 1 }
SmtpRecvMailAddrEntry ::=
SEQUENCE {
smtpRecvMailAddrIndex INTEGER,
smtpRecvMailAddr OCTET STRING,
smtpRecvMailAddrStatus RowStatus
}
smtpRecvMailAddrIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receivers' mail address index (1~8)."
::= { smtpRecvMailAddrEntry 1 }
smtpRecvMailAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receivers' mail address."
::= { smtpRecvMailAddrEntry 2 }
smtpRecvMailAddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rowstatus of the receiver's mail address."
::= { smtpRecvMailAddrEntry 3 }
igmpMulticastVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IGMP Multicast Vlan function."
DEFVAL { disabled }
::= { companyISMVLAN 1 }
-- ----------------------------------------------------------
-- igmpMulticastVlanTable Table
-- ----------------------------------------------------------
igmpMulticastVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the IGMP snooping multicast VLAN table."
::= { companyISMVLAN 2 }
igmpMulticastVlanEntry OBJECT-TYPE
SYNTAX IgmpMulticastVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of igmpMulticastVlanTable."
INDEX { igmpMulticastVlanid}
::= { igmpMulticastVlanTable 1 }
IgmpMulticastVlanEntry ::=
SEQUENCE {
igmpMulticastVlanid
INTEGER,
igmpMulticastVlanName
DisplayString,
igmpMulticastVlanSourcePort
PortList,
igmpMulticastVlanMemberPort
PortList,
igmpMulticastVlanTagMemberPort
PortList,
igmpMulticastVlanState
INTEGER,
igmpMulticastVlanReplaceSourceIp
IpAddress,
igmpMulticastVlanRowStatus
RowStatus
}
igmpMulticastVlanid OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry."
::= { igmpMulticastVlanEntry 1 }
igmpMulticastVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry."
::= { igmpMulticastVlanEntry 2 }
igmpMulticastVlanSourcePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the source ports of the IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports."
::= { igmpMulticastVlanEntry 3 }
igmpMulticastVlanMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports."
::= { igmpMulticastVlanEntry 4 }
igmpMulticastVlanTagMemberPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port list of the tag member ports of the IGMP
snooping multicast VLAN."
::= { igmpMulticastVlanEntry 5 }
igmpMulticastVlanState OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to enable or disable the IGMP snooping multicast VLAN."
::= { igmpMulticastVlanEntry 6 }
igmpMulticastVlanReplaceSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The replacement source IP of this multicast VLAN."
::= { igmpMulticastVlanEntry 7 }
igmpMulticastVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { igmpMulticastVlanEntry 8 }
-- -----------------------------------------------------------------------------
-- igmpMulticastVlanGroupTable
-- -----------------------------------------------------------------------------
igmpMulticastVlanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing the IGMP snooping multicast VLAN group information"
::= { companyISMVLAN 3 }
igmpMulticastVlanGroupEntry OBJECT-TYPE
SYNTAX IgmpMulticastVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the current IGMP snooping multicast VLAN group."
INDEX { igmpMulticastVlanGroupVid, igmpMulticastVlanGroupFromIp, igmpMulticastVlanGroupToIp }
::= { igmpMulticastVlanGroupTable 1 }
IgmpMulticastVlanGroupEntry ::=
SEQUENCE {
igmpMulticastVlanGroupVid
INTEGER,
igmpMulticastVlanGroupFromIp
IpAddress,
igmpMulticastVlanGroupToIp
IpAddress,
igmpMulticastVlanGroupStatus
RowStatus
}
igmpMulticastVlanGroupVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the VID of the IGMP snooping multicast VLAN group."
::= { igmpMulticastVlanGroupEntry 1 }
igmpMulticastVlanGroupFromIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { igmpMulticastVlanGroupEntry 2 }
igmpMulticastVlanGroupToIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the multicast address list for this VLAN."
::= { igmpMulticastVlanGroupEntry 3 }
igmpMulticastVlanGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { igmpMulticastVlanGroupEntry 4 }
-- ----------------------------------------------------------------
-- The RMON group
-- ----------------------------------------------------------------
rmonGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for enabling or disabling RMON function."
::= { companyRMON 1 }
rmonStatistics OBJECT IDENTIFIER ::= { companyRMON 2 }
rmonHistory OBJECT IDENTIFIER ::= { companyRMON 3 }
rmonAlarm OBJECT IDENTIFIER ::= { companyRMON 4 }
rmonEvent OBJECT IDENTIFIER ::= { companyRMON 5 }
-- The Ethernet Statistics Group
--
-- Implementation of the Ethernet Statistics group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The ethernet statistics group contains statistics measured by the
-- probe for each monitored interface on this device. These
-- statistics take the form of free running counters that start from
-- zero when a valid entry is created.
--
-- This group currently has statistics defined only for
-- Ethernet interfaces. Each etherStatsEntry contains statistics
-- for one Ethernet interface. The probe must create one
-- etherStats entry for each monitored Ethernet interface
-- on the device.
rmonStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Ethernet statistics entries."
::= { rmonStatistics 1 }
rmonStatsEntry OBJECT-TYPE
SYNTAX RmonStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1"
INDEX { rmonStatsIndex }
::= { rmonStatsTable 1 }
RmonStatsEntry ::= SEQUENCE {
rmonStatsIndex Integer32,
rmonStatsDataSource OBJECT IDENTIFIER,
rmonStatsOwner OwnerString,
rmonStatsStatus RmonStatus
}
rmonStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this
etherStats entry."
::= { rmonStatsEntry 1 }
rmonStatsDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the source of the data that
this etherStats entry is configured to analyze. This
source can be any ethernet interface on this device.
In order to identify a particular interface, this object
shall identify the instance of the ifIndex object,
defined in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
etherStatsStatus object is equal to valid(1)."
::= { rmonStatsEntry 2 }
rmonStatsOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonStatsEntry 3 }
rmonStatsStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this etherStats entry."
::= { rmonStatsEntry 4 }
-- The History Control Group
-- Implementation of the History Control group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The history control group controls the periodic statistical
-- sampling of data from various types of networks. The
-- historyControlTable stores configuration entries that each
-- define an interface, polling period, and other parameters.
-- Once samples are taken, their data is stored in an entry
-- in a media-specific table. Each such entry defines one
-- sample, and is associated with the historyControlEntry that
-- caused the sample to be taken. Each counter in the
-- etherHistoryEntry counts the same event as its similarly-named
-- counterpart in the etherStatsEntry, except that each value here
-- is a cumulative sum during a sampling period.
--
-- If the probe keeps track of the time of day, it should start
-- the first sample of the history at a time such that
-- when the next hour of the day begins, a sample is
-- started at that instant. This tends to make more
-- user-friendly reports, and enables comparison of reports
-- from different probes that have relatively accurate time
-- of day.
--
-- The probe is encouraged to add two history control entries
-- per monitored interface upon initialization that describe a short
-- term and a long term polling period. Suggested parameters are 30
-- seconds for the short term polling period and 30 minutes for
-- the long term period.
rmonHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of history control entries."
::= { rmonHistory 1 }
rmonHistoryEntry OBJECT-TYPE
SYNTAX RmonHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic sampling of
statistics. As an example, an instance of the
historyControlInterval object might be named
historyControlInterval.2"
INDEX { rmonHistoryIndex }
::= { rmonHistoryTable 1 }
RmonHistoryEntry ::= SEQUENCE {
rmonHistoryIndex Integer32,
rmonHistoryDataSource OBJECT IDENTIFIER,
rmonHistoryBucketsRequested Integer32,
rmonHistoryInterval Integer32,
rmonHistoryOwner OwnerString,
rmonHistoryStatus RmonStatus
}
rmonHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
historyControl table. Each such entry defines a
set of samples at a particular interval for an
interface on the device."
::= { rmonHistoryEntry 1 }
rmonHistoryDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
historyControlEntry. This source can be any
interface on this device. In order to identify
a particular interface, this object shall identify
the instance of the ifIndex object, defined
in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1)."
::= { rmonHistoryEntry 2 }
rmonHistoryBucketsRequested OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.
When this object is created or modified, the probe
should set historyControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources."
DEFVAL { 50 }
::= { rmonHistoryEntry 3 }
rmonHistoryInterval OBJECT-TYPE
SYNTAX Integer32 (1..3600)
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
historyControlEntry. This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager will
take into account the possibility of overflow in any of
the associated counters. It is important to consider the
minimum time in which any counter could overflow on a
particular media type and set the historyControlInterval
object to a value less than this interval. This is
typically most important for the 'octets' counter in any
media-specific table. For example, on an Ethernet
network, the etherHistoryOctets counter could overflow
in about one hour at the Ethernet's maximum
utilization.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1)."
DEFVAL { 1800 }
::= { rmonHistoryEntry 4 }
rmonHistoryOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonHistoryEntry 5 }
rmonHistoryStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this historyControl entry.
Each instance of the media-specific table associated
with this historyControlEntry will be deleted by the agent
if this historyControlEntry is not equal to valid(1)."
::= { rmonHistoryEntry 6 }
-- The Alarm Group
-- Implementation of the Alarm group is optional. The Alarm Group
-- requires the implementation of the Event group.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The Alarm group periodically takes statistical samples from
-- variables in the probe and compares them to thresholds that have
-- been configured. The alarm table stores configuration
-- entries that each define a variable, polling period, and
-- threshold parameters. If a sample is found to cross the
-- threshold values, an event is generated. Only variables that
-- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32,
-- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in
-- this way.
--
-- This function has a hysteresis mechanism to limit the generation
-- of events. This mechanism generates one event as a threshold
-- is crossed in the appropriate direction. No more events are
-- generated for that threshold until the opposite threshold is
-- crossed.
--
-- In the case of a sampling a deltaValue, a probe may implement
-- this mechanism with more precision if it takes a delta sample
-- twice per period, each time comparing the sum of the latest two
-- samples to the threshold. This allows the detection of threshold
-- crossings that span the sampling boundary. Note that this does
-- not require any special configuration of the threshold value.
-- It is suggested that probes implement this more precise algorithm.
rmonAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of alarm entries."
::= { rmonAlarm 1 }
rmonAlarmEntry OBJECT-TYPE
SYNTAX RmonAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8"
INDEX { rmonAlarmIndex }
::= { rmonAlarmTable 1 }
RmonAlarmEntry ::= SEQUENCE {
rmonAlarmIndex Integer32,
rmonAlarmInterval Integer32,
rmonAlarmVariable OBJECT IDENTIFIER,
rmonAlarmSampleType INTEGER,
rmonAlarmRisingThreshold Integer32,
rmonAlarmFallingThreshold Integer32,
rmonAlarmRisingEventIndex Integer32,
rmonAlarmFallingEventIndex Integer32,
rmonAlarmOwner OwnerString,
rmonAlarmStatus RmonStatus
}
rmonAlarmIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device."
::= { rmonAlarmEntry 1 }
rmonAlarmInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "Seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be set short enough
that the sampled variable is very unlikely to
increase or decrease by more than 2^31 - 1 during
a single sampling interval.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 2 }
rmonAlarmVariable OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
Because SNMP access control is articulated entirely
in terms of the contents of MIB views, no access
control mechanism exists that can restrict the value of
this object to identify only those objects that exist
in a particular MIB view. Because there is thus no
acceptable means of restricting the read access that
could be obtained through the alarm mechanism, the
probe must only grant write access to this object in
those views that have read access to all objects on
the probe.
During a set operation, if the supplied variable name is
not available in the selected MIB view, a badValue error
must be returned. If at any time the variable name of
an established alarmEntry is no longer available in the
selected MIB view, the probe must change the status of
this alarmEntry to invalid(4).
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 3 }
rmonAlarmSampleType OBJECT-TYPE
SYNTAX INTEGER {
absoluteValue(1),
deltaValue(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directly with the thresholds at the
end of the sampling interval. If the value of this
object is deltaValue(2), the value of the selected
variable at the last sample will be subtracted from
the current value, and the difference compared with
the thresholds.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 4 }
rmonAlarmRisingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is greater than or
equal to this threshold and the associated
alarmStartupAlarm is equal to risingAlarm(1) or
risingOrFallingAlarm(3).
After a rising event is generated, another such event
will not be generated until the sampled value
falls below this threshold and reaches the
alarmFallingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 5 }
rmonAlarmFallingThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is less than or
equal to this threshold and the associated
alarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingAlarm(3).
After a falling event is generated, another such event
will not be generated until the sampled value
rises above this threshold and reaches the
alarmRisingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 6 }
rmonAlarmRisingEventIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 7 }
rmonAlarmFallingEventIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1)."
::= { rmonAlarmEntry 8 }
rmonAlarmOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { rmonAlarmEntry 9 }
rmonAlarmStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this alarm entry."
::= { rmonAlarmEntry 10 }
-- The Event Group
-- Implementation of the Event group is optional.
-- Consult the MODULE-COMPLIANCE macro for the authoritative
-- conformance information for this MIB.
--
-- The Event group controls the generation and notification
-- of events from this device. Each entry in the eventTable
-- describes the parameters of the event that can be triggered.
-- Each event entry is fired by an associated condition located
-- elsewhere in the MIB. An event entry may also be associated
-- with a function elsewhere in the MIB that will be executed
-- when the event is generated. For example, a channel may
-- be turned on or off by the firing of an event.
--
-- Each eventEntry may optionally specify that a log entry
-- be created on its behalf whenever the event occurs.
-- Each entry may also specify that notification should
-- occur by way of SNMP trap messages. In this case, the
-- community for the trap message is given in the associated
-- eventCommunity object. The enterprise and specific trap
-- fields of the trap are determined by the condition that
-- triggered the event. Two traps are defined: risingAlarm and
-- fallingAlarm. If the eventTable is triggered by a condition
-- specified elsewhere, the enterprise and specific trap fields
-- must be specified for traps generated for that condition.
rmonEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of events to be generated."
::= { rmonEvent 1 }
rmonEventEntry OBJECT-TYPE
SYNTAX RmonEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of parameters that describe an event to be generated
when certain conditions are met. As an example, an instance
of the eventLastTimeSent object might be named
eventLastTimeSent.6"
INDEX { rmonEventIndex }
::= { rmonEventTable 1 }
RmonEventEntry ::= SEQUENCE {
rmonEventIndex Integer32,
rmonEventDescription DisplayString,
rmonEventType INTEGER,
rmonEventCommunity OCTET STRING,
rmonEventOwner OwnerString,
rmonEventStatus RmonStatus
}
rmonEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
event table. Each such entry defines one event that
is to be generated when the appropriate conditions
occur."
::= { rmonEventEntry 1 }
rmonEventDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A comment describing this event entry."
::= { rmonEventEntry 2 }
rmonEventType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
log(2),
snmptrap(3), -- send an SNMP trap
logandtrap(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of notification that the probe will make
about this event. In the case of log, an entry is
made in the log table for each event. In the case of
snmp-trap, an SNMP trap is sent to one or more
management stations."
::= { rmonEventEntry 3 }
rmonEventCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If an SNMP trap is to be sent, it will be sent to
the SNMP community specified by this octet string."
::= { rmonEventEntry 4 }
rmonEventOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it.
If this object contains a string starting with 'monitor'
and has associated entries in the log table, all connected
management stations should retrieve those log entries,
as they may have significance to all management stations
connected to this device"
::= { rmonEventEntry 5 }
rmonEventStatus OBJECT-TYPE
SYNTAX RmonStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this event entry.
If this object is not equal to valid(1), all associated
log entries shall be deleted by the agent."
::= { rmonEventEntry 6 }
-- *****************************************************************
--
-- Enterprise Trap group
--
-- *****************************************************************
bridgeGeneral TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"AST-BRG-GEN-TRAP-VAL."
::= 1
bridgeError TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"AST-BRG-ERR-TRAP-VAL."
::= 2
stpNewRoot TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"AST-NEW-ROOT-TRAP-VAL."
::= 3
topologyChange TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"AST-TOPOLOGY-CHG-TRAP-VAL."
::= 4
protocolMigration TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"AST-PROTOCOL-MIGRATION-TRAP-VAL."
::= 5
iivalidBpduRxd TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"AST-INVALID-BPDU-RXD-TRAP-VAL."
::= 6
newPortRole TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"AST-NEW-PORTROLE-TRAP-VAL."
::= 7
firmwareUpgradeSuccess TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"SNMP-FIRMUPGRADE-SUCC."
::= 8
firmwareUpgradeFailure TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"SNMP-FIRMUPGRADE-FAIL."
::= 9
firmwareIllegalFile TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"SNMP-FIRMUPGRADE-FAIL2."
::= 10
firmwareTransferError TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"SNMP-FIRMUPGRADE-FAIL1."
::= 11
firmwareChecksumError TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"SNMP-FIRMUPGRADE-FAIL3."
::= 12
stormOccurred TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"Storm Occurred."
::= 20
stormCleared TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"Storm Cleared."
::= 21
macNotification TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"Learning Mac Notification."
::= 22
impbMacBlocked TRAP-TYPE
ENTERPRISE des-1210-10axme
DESCRIPTION
"Storm Occurred."
::= 23
END
View Git Blame Copy Permalink