WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/cisco/ME1200-QOS-MIB

3159 lines
115 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- QOS-MIB: ME1200 Private MIB
--
--
-- ****************************************************************
ME1200-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
me1200SwitchMgmt
FROM CISCOME1200-MIB
Dscp FROM DIFFSERV-DSCP-TC
InetAddressIPv6 FROM INET-ADDRESS-MIB
ME1200EtherType FROM ME1200-TC
ME1200InterfaceIndex FROM ME1200-TC
ME1200Percent FROM ME1200-TC
ME1200PortList FROM ME1200-TC
ME1200RowEditorState FROM ME1200-TC
ME1200Unsigned16 FROM ME1200-TC
ME1200Unsigned8 FROM ME1200-TC
Integer32 FROM SNMPv2-SMI
IpAddress FROM SNMPv2-SMI
Unsigned32 FROM SNMPv2-SMI
MacAddress FROM SNMPv2-TC
TruthValue FROM SNMPv2-TC
;
me1200QosMIB MODULE-IDENTITY
LAST-UPDATED "201408140000Z"
ORGANIZATION
"Cisco Systems, Inc"
CONTACT-INFO
"Cisco Systems, Inc
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-me1200@cisco.com"
DESCRIPTION
"This is a private MIB for QoS"
REVISION "201408140000Z"
DESCRIPTION
"Updated various range specifications"
REVISION "201403110000Z"
DESCRIPTION
"Definition of type InterfaceIndex changed from Unsigned32 to Integer32
as it is used as index in some tables"
REVISION "201402180000Z"
DESCRIPTION
"Do no use Unsigned32 for indexes"
REVISION "201401290000Z"
DESCRIPTION
"Locate all objects under ciscoME1200MIB"
REVISION "201310080000Z"
DESCRIPTION
"Initial version"
::= { me1200SwitchMgmt 14 }
ME1200ASRType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents an Any/Specific/Range selector."
SYNTAX INTEGER { any(0), specific(1), range(2) }
ME1200BitType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a bit selector."
SYNTAX INTEGER { any(0), zero(1), one(2) }
ME1200DestMacType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a destination MAC type selector."
SYNTAX INTEGER { any(0), unicast(1), multicast(2), broadcast(3) }
ME1200DscpClassify ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that indicates the DSCP classify mode."
SYNTAX INTEGER { none(0), zero(1), selected(2), all(3) }
ME1200DscpRemark ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that indicates the DSCP remark mode."
SYNTAX INTEGER { disabled(0), rewrite(1), remap(2), remapDp(3) }
ME1200MaxSelector ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that selects between 'Maximum Drop Probability' or 'Maximum
Fill Level'."
SYNTAX INTEGER { maximumDropProbability(0), maximumFillLevel(1) }
ME1200QceFrameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that indicates the QCE frame type key."
SYNTAX INTEGER { any(0), etype(1), llc(2), snap(3), ipv4(4), ipv6(5) }
ME1200QceUserType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that indicates the QCE user type. If the value is zero it
indicates a static configuration. If the value is non-zero it indicates
a dynamic configuration made by another subsystem."
SYNTAX INTEGER { admin(0), voiceVlan(1) }
ME1200TagRemarkingMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that indicates the tag remarking mode."
SYNTAX INTEGER { classified(0), default(2), mapped(3) }
ME1200VcapKeyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a VCAP key type selector."
SYNTAX INTEGER { normal(0), doubleTag(1), ipAddr(2), macIpAddr(3) }
ME1200VlanTagPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"VLAN priority."
SYNTAX INTEGER { any(0), value0(1), value1(2), value2(3), value3(4), value4(5), value5(6), value6(7), value7(8), range0to1(9), range2to3(10), range4to5(11), range6to7(12), range0to3(13), range4to7(14) }
ME1200VlanTagType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a VLAN tag type selector."
SYNTAX INTEGER { any(0), untagged(1), tagged(2), cTagged(3), sTagged(4) }
me1200QosMIBObjects OBJECT IDENTIFIER
::= { me1200QosMIB 1 }
me1200QosConfig OBJECT IDENTIFIER
::= { me1200QosMIBObjects 2 }
me1200QosGlobals OBJECT IDENTIFIER
::= { me1200QosConfig 1 }
me1200QosStormPolicers OBJECT IDENTIFIER
::= { me1200QosGlobals 1 }
me1200QosStormPolicerUnicast OBJECT IDENTIFIER
::= { me1200QosStormPolicers 1 }
me1200QosStormPolicerUnicastEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the storm policer is enabled."
::= { me1200QosStormPolicerUnicast 1 }
me1200QosStormPolicerUnicastRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the storm policer rate in frames/second. Valid values are: 1,
2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000,
32000, 64000, 128000, 256000, 512000, 1024000"
::= { me1200QosStormPolicerUnicast 2 }
me1200QosStormPolicerMulticast OBJECT IDENTIFIER
::= { me1200QosStormPolicers 2 }
me1200QosStormPolicerMulticastEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the storm policer is enabled."
::= { me1200QosStormPolicerMulticast 1 }
me1200QosStormPolicerMulticastRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the storm policer rate in frames/second. Valid values are: 1,
2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000,
32000, 64000, 128000, 256000, 512000, 1024000"
::= { me1200QosStormPolicerMulticast 2 }
me1200QosStormPolicerBroadcast OBJECT IDENTIFIER
::= { me1200QosStormPolicers 3 }
me1200QosStormPolicerBroadcastEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the storm policer is enabled."
::= { me1200QosStormPolicerBroadcast 1 }
me1200QosStormPolicerBroadcastRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the storm policer rate in frames/second. Valid values are: 1,
2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000,
32000, 64000, 128000, 256000, 512000, 1024000"
::= { me1200QosStormPolicerBroadcast 2 }
me1200QosWredTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosWredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of WRED for queue 0 through 5"
::= { me1200QosGlobals 2 }
me1200QosWredEntry OBJECT-TYPE
SYNTAX ME1200QosWredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration for a specific queue"
INDEX { me1200QosWredQueue }
::= { me1200QosWredTable 1 }
ME1200QosWredEntry ::= SEQUENCE {
me1200QosWredQueue Integer32,
me1200QosWredEnable TruthValue,
me1200QosWredMinimumFillLevel ME1200Percent,
me1200QosWredMaximum ME1200Percent,
me1200QosWredMaxSelector ME1200MaxSelector
}
me1200QosWredQueue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue index."
::= { me1200QosWredEntry 1 }
me1200QosWredEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, RED is enabled for this queue"
::= { me1200QosWredEntry 2 }
me1200QosWredMinimumFillLevel OBJECT-TYPE
SYNTAX ME1200Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the lower RED fill level threshold in percent of the whole
queue. If the queue filling level is below this threshold, the drop
probability is zero. Valid range is 0-100"
::= { me1200QosWredEntry 3 }
me1200QosWredMaximum OBJECT-TYPE
SYNTAX ME1200Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the upper RED drop probability or fill level threshold for
frames marked with Drop Precedence Level 1 (yellow frames). Valid range
is 1-100"
::= { me1200QosWredEntry 4 }
me1200QosWredMaxSelector OBJECT-TYPE
SYNTAX ME1200MaxSelector
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects whether 'Maximum' controls 'Maximum Drop Probability' or
'Maximum Fill Level'."
::= { me1200QosWredEntry 5 }
me1200QosDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has 64 entries, one for each DSCP value"
::= { me1200QosGlobals 3 }
me1200QosDscpEntry OBJECT-TYPE
SYNTAX ME1200QosDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration for a specific DSCP"
INDEX { me1200QosDscpDscp }
::= { me1200QosDscpTable 1 }
ME1200QosDscpEntry ::= SEQUENCE {
me1200QosDscpDscp Dscp,
me1200QosDscpTrust TruthValue,
me1200QosDscpCos Unsigned32,
me1200QosDscpDpl ME1200Unsigned8,
me1200QosDscpIngressTranslation Dscp,
me1200QosDscpClassify TruthValue,
me1200QosDscpEgressTranslation Dscp,
me1200QosDscpEgressTranslationDp1 Dscp
}
me1200QosDscpDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DSCP index."
::= { me1200QosDscpEntry 1 }
me1200QosDscpTrust OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, this DSCP value is trusted. Packets arriving on interfaces
where 'TrustDscp' is enabled will be classified to the corresponding
CoS and DPL in this table."
::= { me1200QosDscpEntry 2 }
me1200QosDscpCos OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CoS value which the DSCP value maps to. Valid range is 0-7."
::= { me1200QosDscpEntry 3 }
me1200QosDscpDpl OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DPL (Drop Precedence Level) which the DSCP value maps to. Valid
range is 0-1."
::= { me1200QosDscpEntry 4 }
me1200QosDscpIngressTranslation OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The new classified DSCP value which the original DSCP value is replaced
with if 'DscpTranslate' is enabled on the interface"
::= { me1200QosDscpEntry 5 }
me1200QosDscpClassify OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, then packets received on interfaces where 'DscpClassify' is
set to 'selected' will be classified to a new DSCP value based on the
classified CoS and DPL value configured in the qosCosDscpTable."
::= { me1200QosDscpEntry 6 }
me1200QosDscpEgressTranslation OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The new DSCP value that will be written into the packet at egress if
'DscpRemark' on the interface is set to 'remap' or 'remap-dp'. If
'remap-dp' is set then only packets classified to Dpl 0 will use this
table."
::= { me1200QosDscpEntry 7 }
me1200QosDscpEgressTranslationDp1 OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The new DSCP value that will be written into the packet at egress if
'DscpRemark' on the interface is set to 'remap-dp'. Only packets
classified to Dpl 1 will use this table."
::= { me1200QosDscpEntry 8 }
me1200QosCosToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosCosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has QOS_CLASS_CNT entries, one for each Cos value"
::= { me1200QosGlobals 4 }
me1200QosCosToDscpEntry OBJECT-TYPE
SYNTAX ME1200QosCosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration for a specific Cos"
INDEX { me1200QosCosToDscpCos }
::= { me1200QosCosToDscpTable 1 }
ME1200QosCosToDscpEntry ::= SEQUENCE {
me1200QosCosToDscpCos Integer32,
me1200QosCosToDscpDscp Dscp,
me1200QosCosToDscpDscpDp1 Dscp
}
me1200QosCosToDscpCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CoS index."
::= { me1200QosCosToDscpEntry 1 }
me1200QosCosToDscpDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value which the classified CoS value maps to when the
classified DPL is 0."
::= { me1200QosCosToDscpEntry 2 }
me1200QosCosToDscpDscpDp1 OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value which the classified CoS value maps to when the
classified DPL is 1."
::= { me1200QosCosToDscpEntry 3 }
me1200QosQce OBJECT IDENTIFIER
::= { me1200QosGlobals 10 }
me1200QosQceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosQceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of QCEs. The index is QceId."
::= { me1200QosQce 1 }
me1200QosQceEntry OBJECT-TYPE
SYNTAX ME1200QosQceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration of a single QCE."
INDEX { me1200QosQceQceId }
::= { me1200QosQceTable 1 }
ME1200QosQceEntry ::= SEQUENCE {
me1200QosQceQceId Integer32,
me1200QosQceNextQceId Unsigned32,
me1200QosQcePortList ME1200PortList,
me1200QosQceDestMacType ME1200DestMacType,
me1200QosQceDestMac MacAddress,
me1200QosQceDestMacMask MacAddress,
me1200QosQceSrcMac MacAddress,
me1200QosQceSrcMacMask MacAddress,
me1200QosQceVlanTagType ME1200VlanTagType,
me1200QosQceVlanIdOp ME1200ASRType,
me1200QosQceVlanId ME1200Unsigned16,
me1200QosQceVlanIdRange ME1200Unsigned16,
me1200QosQcePcp ME1200VlanTagPriority,
me1200QosQceDei ME1200BitType,
me1200QosQceInnerVlanTagType ME1200VlanTagType,
me1200QosQceInnerVlanIdOp ME1200ASRType,
me1200QosQceInnerVlanId ME1200Unsigned16,
me1200QosQceInnerVlanIdRange ME1200Unsigned16,
me1200QosQceInnerPcp ME1200VlanTagPriority,
me1200QosQceInnerDei ME1200BitType,
me1200QosQceFrameType ME1200QceFrameType,
me1200QosQceEtype ME1200EtherType,
me1200QosQceLlcDsap ME1200Unsigned8,
me1200QosQceLlcDsapMask ME1200Unsigned8,
me1200QosQceLlcSsap ME1200Unsigned8,
me1200QosQceLlcSsapMask ME1200Unsigned8,
me1200QosQceLlcControl ME1200Unsigned8,
me1200QosQceLlcControlMask ME1200Unsigned8,
me1200QosQceSnapPid ME1200Unsigned16,
me1200QosQceSnapPidMask ME1200Unsigned16,
me1200QosQceIpv4Fragment ME1200BitType,
me1200QosQceIpv4DscpOp ME1200ASRType,
me1200QosQceIpv4Dscp ME1200Unsigned16,
me1200QosQceIpv4DscpRange ME1200Unsigned16,
me1200QosQceIpv4Protocol ME1200Unsigned8,
me1200QosQceIpv4ProtocolMask ME1200Unsigned8,
me1200QosQceIpv4SrcIp IpAddress,
me1200QosQceIpv4SrcIpMask IpAddress,
me1200QosQceIpv4DestIp IpAddress,
me1200QosQceIpv4DestIpMask IpAddress,
me1200QosQceIpv4SrcPortOp ME1200ASRType,
me1200QosQceIpv4SrcPort ME1200Unsigned16,
me1200QosQceIpv4SrcPortRange ME1200Unsigned16,
me1200QosQceIpv4DestPortOp ME1200ASRType,
me1200QosQceIpv4DestPort ME1200Unsigned16,
me1200QosQceIpv4DestPortRange ME1200Unsigned16,
me1200QosQceIpv6DscpOp ME1200ASRType,
me1200QosQceIpv6Dscp ME1200Unsigned16,
me1200QosQceIpv6DscpRange ME1200Unsigned16,
me1200QosQceIpv6Protocol ME1200Unsigned8,
me1200QosQceIpv6ProtocolMask ME1200Unsigned8,
me1200QosQceIpv6SrcIp InetAddressIPv6,
me1200QosQceIpv6SrcIpMask InetAddressIPv6,
me1200QosQceIpv6DestIp InetAddressIPv6,
me1200QosQceIpv6DestIpMask InetAddressIPv6,
me1200QosQceIpv6SrcPortOp ME1200ASRType,
me1200QosQceIpv6SrcPort ME1200Unsigned16,
me1200QosQceIpv6SrcPortRange ME1200Unsigned16,
me1200QosQceIpv6DestPortOp ME1200ASRType,
me1200QosQceIpv6DestPort ME1200Unsigned16,
me1200QosQceIpv6DestPortRange ME1200Unsigned16,
me1200QosQceActionCosEnable TruthValue,
me1200QosQceActionCos Unsigned32,
me1200QosQceActionDplEnable TruthValue,
me1200QosQceActionDpl ME1200Unsigned8,
me1200QosQceActionDscpEnable TruthValue,
me1200QosQceActionDscp ME1200Unsigned8,
me1200QosQceActionPcpDeiEnable TruthValue,
me1200QosQceActionPcp Unsigned32,
me1200QosQceActionDei ME1200Unsigned8,
me1200QosQceActionPolicyEnable TruthValue,
me1200QosQceActionPolicy Unsigned32,
me1200QosQceAction ME1200RowEditorState
}
me1200QosQceQceId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QCE Id index."
::= { me1200QosQceEntry 1 }
me1200QosQceNextQceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"QCE Id of the next QCE."
::= { me1200QosQceEntry 2 }
me1200QosQcePortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports that are member of this QCE."
::= { me1200QosQceEntry 4 }
me1200QosQceDestMacType OBJECT-TYPE
SYNTAX ME1200DestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the destination MAC type to match."
::= { me1200QosQceEntry 5 }
me1200QosQceDestMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits destination MAC address. The packets destination
address is AND-ed with the value of DestMacMask and then compared
against the value of this object. If this object value and the value of
DestMacMask is 00-00-00-00-00-00, this entry matches any destination
MAC address. This object can only be configured if DestMacType is
any(0) and DestMacMask is ff-ff-ff-ff-ff-ff."
::= { me1200QosQceEntry 6 }
me1200QosQceDestMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits destination MAC address mask.Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff."
::= { me1200QosQceEntry 7 }
me1200QosQceSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits source MAC address. The packets source address is
AND-ed with the value of SrcMacMask and then compared against the value
of this object. If this object value and the value of SrcMacMask is
00-00-00-00-00-00, this entry matches any source MAC address. This
object can only be configured if SrcMacMask is ff-ff-ff-ff-ff-ff."
::= { me1200QosQceEntry 8 }
me1200QosQceSrcMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits source MAC address mask. Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff."
::= { me1200QosQceEntry 9 }
me1200QosQceVlanTagType OBJECT-TYPE
SYNTAX ME1200VlanTagType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN tag type to match."
::= { me1200QosQceEntry 10 }
me1200QosQceVlanIdOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packets's VLAN ID is to be compared."
::= { me1200QosQceEntry 11 }
me1200QosQceVlanId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the starting VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is not
any(0)."
::= { me1200QosQceEntry 12 }
me1200QosQceVlanIdRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the ending VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is
range(2)."
::= { me1200QosQceEntry 13 }
me1200QosQcePcp OBJECT-TYPE
SYNTAX ME1200VlanTagPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value(s) to be compared."
::= { me1200QosQceEntry 14 }
me1200QosQceDei OBJECT-TYPE
SYNTAX ME1200BitType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DEI value to be compared. Valid range is 0-1."
::= { me1200QosQceEntry 15 }
me1200QosQceInnerVlanTagType OBJECT-TYPE
SYNTAX ME1200VlanTagType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the inner VLAN tag type to match."
::= { me1200QosQceEntry 16 }
me1200QosQceInnerVlanIdOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packets's inner VLAN ID is to be compared."
::= { me1200QosQceEntry 17 }
me1200QosQceInnerVlanId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the starting VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp is not any(0)."
::= { me1200QosQceEntry 18 }
me1200QosQceInnerVlanIdRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the ending VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp is range(2)."
::= { me1200QosQceEntry 19 }
me1200QosQceInnerPcp OBJECT-TYPE
SYNTAX ME1200VlanTagPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner PCP value(s) to be compared."
::= { me1200QosQceEntry 20 }
me1200QosQceInnerDei OBJECT-TYPE
SYNTAX ME1200BitType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner DEI value to be compared. Valid range is 0-1."
::= { me1200QosQceEntry 21 }
me1200QosQceFrameType OBJECT-TYPE
SYNTAX ME1200QceFrameType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet's frame type. Modifying the frame type on an
existing QCE will restore the content of all frame type dependent
configuration to default."
::= { me1200QosQceEntry 100 }
me1200QosQceEtype OBJECT-TYPE
SYNTAX ME1200EtherType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet's 16 bit Ethernet type field. Valid values are:
0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and
0x86DD(IPv6).This object can only be configured if FrameType is
etype(1)."
::= { me1200QosQceEntry 101 }
me1200QosQceLlcDsap OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP
field is AND-ed with the value of LlcDsapMask and then compared against
the value of this object. If this object value and the value of
LlcDsapMask is 0x00, this entry matches any LLC DSAP. Valid range is
0x00-0xFF. This object can only be configured if FrameType is llc(2)."
::= { me1200QosQceEntry 200 }
me1200QosQceLlcDsapMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2)."
::= { me1200QosQceEntry 201 }
me1200QosQceLlcSsap OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP
field is AND-ed with the value of LlcSsapMask and then compared against
the value of this object. If this object value and the value of
LlcSsapMask is 0x00, this entry matches any LLC SSAP. Valid range is
0x00-0xFF. This object can only be configured if FrameType is llc(2)."
::= { me1200QosQceEntry 202 }
me1200QosQceLlcSsapMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2)."
::= { me1200QosQceEntry 203 }
me1200QosQceLlcControl OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packets's 8 bit LLC Control field. The packets LLC
Control field is AND-ed with the value of LlcControlMask and then
compared against the value of this object. If this object value and the
value of LlcControlMask is 0x00, this entry matches any LLC Control.
Valid range is 0x00-0xFF. This object can only be configured if
FrameType is llc(2)."
::= { me1200QosQceEntry 204 }
me1200QosQceLlcControlMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF.
This object can only be configured if FrameType is llc(2)."
::= { me1200QosQceEntry 205 }
me1200QosQceSnapPid OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet's 16 bit SNAP PID field. The packets SNAP PID
field is AND-ed with the value of SnapPidMask and then compared against
the value of this object. If this object value and the value of
SnapPidMask is 0x0000, this entry matches any ethertype. This object
can only be configured if FrameType is snap(3)."
::= { me1200QosQceEntry 302 }
me1200QosQceSnapPidMask OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF.
This object can only be configured if FrameType is snap(3)."
::= { me1200QosQceEntry 303 }
me1200QosQceIpv4Fragment OBJECT-TYPE
SYNTAX ME1200BitType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how an IPv4 fragment bit is to be compared. This object can
only be configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 400 }
me1200QosQceIpv4DscpOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how an IPv4 DSCP field is to be compared. This object can
only be configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 401 }
me1200QosQceIpv4Dscp OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4) and Ipv4DscpOp is not any(0)."
::= { me1200QosQceEntry 402 }
me1200QosQceIpv4DscpRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4) and Ipv4DscpOp is range(2)."
::= { me1200QosQceEntry 403 }
me1200QosQceIpv4Protocol OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol number field in the IPv4 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv4ProtocolMask and then compared with the value of this
object. If Ipv4Protocol and Ipv4protocolMask are 0, this entry matches
any IPv4 protocol. Valid range is 0-255. This object can only be
configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 404 }
me1200QosQceIpv4ProtocolMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 405 }
me1200QosQceIpv4SrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 source address. The packets source address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIP and Ipv4SrcIpMask are 0.0.0.0, this entry
matches any IPv4 source address. This object can only be configured if
FrameType is ipv4(4)."
::= { me1200QosQceEntry 406 }
me1200QosQceIpv4SrcIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 source address mask. This object can only be
configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 407 }
me1200QosQceIpv4DestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 destination address. The packets destination address
is AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIP and Ipv4DestIpMask are 0.0.0.0,
this entry matches any IPv4 destination address. This object can only
be configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 408 }
me1200QosQceIpv4DestIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 destination address mask. This object can only be
configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 409 }
me1200QosQceIpv4SrcPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 410 }
me1200QosQceIpv4SrcPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is not
any(0)."
::= { me1200QosQceEntry 411 }
me1200QosQceIpv4SrcPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is range(2)."
::= { me1200QosQceEntry 412 }
me1200QosQceIpv4DestPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(4)."
::= { me1200QosQceEntry 413 }
me1200QosQceIpv4DestPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv4(4) and
Ipv4DestPortOp is not any(0)."
::= { me1200QosQceEntry 414 }
me1200QosQceIpv4DestPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv4(4) and
Ipv4DestPortOp is range(2)."
::= { me1200QosQceEntry 415 }
me1200QosQceIpv6DscpOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how an IPv6 DSCP field is to be compared. This object can
only be configured if FrameType is ipv6(5)."
::= { me1200QosQceEntry 500 }
me1200QosQceIpv6Dscp OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5) and Ipv6DscpOp is not any(0)."
::= { me1200QosQceEntry 501 }
me1200QosQceIpv6DscpRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5) and Ipv6DscpOp is range(2)."
::= { me1200QosQceEntry 502 }
me1200QosQceIpv6Protocol OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol number field in the IPv6 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv6ProtocolMask and then compared with the value of this
object. If Ipv46rotocol and Ipv6protocolMask are 0, this entry matches
any IPv6 protocol. Valid range is 0-255. This object can only be
configured if FrameType is ipv6(5)."
::= { me1200QosQceEntry 503 }
me1200QosQceIpv6ProtocolMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv6(5)."
::= { me1200QosQceEntry 504 }
me1200QosQceIpv6SrcIp OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIP and Ipv6SrcIpMask are all zeros, this entry
matches any IPv6 source address. Only the least significant 32 bits of
this object are used. This object can only be configured if FrameType
is ipv6(5)."
::= { me1200QosQceEntry 506 }
me1200QosQceIpv6SrcIpMask OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(5)."
::= { me1200QosQceEntry 508 }
me1200QosQceIpv6DestIp OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 destination address. The packets destination address
is AND-ed with the value of Ipv6DestIpMask and then compared with the
value of this object. If Ipv6DestIP and Ipv6DestIpMask are all zeros,
this entry matches any IPv6 destination address. Only the least
significant 32 bits of this object are used. This object can only be
configured if FrameType is ipv6(5)."
::= { me1200QosQceEntry 510 }
me1200QosQceIpv6DestIpMask OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 destination address mask. Only the least significant
32 bits of this object are used. This object can only be configured if
FrameType is ipv6(5)."
::= { me1200QosQceEntry 512 }
me1200QosQceIpv6SrcPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(5)."
::= { me1200QosQceEntry 513 }
me1200QosQceIpv6SrcPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is not
any(0)."
::= { me1200QosQceEntry 514 }
me1200QosQceIpv6SrcPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is range(2)."
::= { me1200QosQceEntry 515 }
me1200QosQceIpv6DestPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(5)."
::= { me1200QosQceEntry 516 }
me1200QosQceIpv6DestPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv6(5) and
Ipv6DestPortOp is not any(0)."
::= { me1200QosQceEntry 517 }
me1200QosQceIpv6DestPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv6(5) and
Ipv6DestPortOp is range(2)."
::= { me1200QosQceEntry 518 }
me1200QosQceActionCosEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the CoS value in ActionCos."
::= { me1200QosQceEntry 1000 }
me1200QosQceActionCos OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CoS value used for classification. Valid range is 0-7."
::= { me1200QosQceEntry 1001 }
me1200QosQceActionDplEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the DPL value in ActionDpl."
::= { me1200QosQceEntry 1002 }
me1200QosQceActionDpl OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DPL value used for classification. Valid range is 0-1."
::= { me1200QosQceEntry 1003 }
me1200QosQceActionDscpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the DSCP value in ActionDscp."
::= { me1200QosQceEntry 1004 }
me1200QosQceActionDscp OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value used for classification. Valid range is 0-1."
::= { me1200QosQceEntry 1005 }
me1200QosQceActionPcpDeiEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the PCP value in ActionPcp and the
DEI value in ActionDei."
::= { me1200QosQceEntry 1006 }
me1200QosQceActionPcp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value used for classification. Valid range is 0-7."
::= { me1200QosQceEntry 1007 }
me1200QosQceActionDei OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DEI value used for classification. Valid range is 0-1."
::= { me1200QosQceEntry 1008 }
me1200QosQceActionPolicyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the policy number in ActionPolicy."
::= { me1200QosQceEntry 1009 }
me1200QosQceActionPolicy OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The policy number used for classification. Valid range is 0-63."
::= { me1200QosQceEntry 1010 }
me1200QosQceAction OBJECT-TYPE
SYNTAX ME1200RowEditorState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action"
::= { me1200QosQceEntry 10000 }
me1200QosQceTableRowEditor OBJECT IDENTIFIER
::= { me1200QosQce 2 }
me1200QosQceTableRowEditorQceId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"QCE Id index."
::= { me1200QosQceTableRowEditor 1 }
me1200QosQceTableRowEditorNextQceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"QCE Id of the next QCE."
::= { me1200QosQceTableRowEditor 2 }
me1200QosQceTableRowEditorPortList OBJECT-TYPE
SYNTAX ME1200PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of ports that are member of this QCE."
::= { me1200QosQceTableRowEditor 4 }
me1200QosQceTableRowEditorDestMacType OBJECT-TYPE
SYNTAX ME1200DestMacType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the destination MAC type to match."
::= { me1200QosQceTableRowEditor 5 }
me1200QosQceTableRowEditorDestMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits destination MAC address. The packets destination
address is AND-ed with the value of DestMacMask and then compared
against the value of this object. If this object value and the value of
DestMacMask is 00-00-00-00-00-00, this entry matches any destination
MAC address. This object can only be configured if DestMacType is
any(0) and DestMacMask is ff-ff-ff-ff-ff-ff."
::= { me1200QosQceTableRowEditor 6 }
me1200QosQceTableRowEditorDestMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits destination MAC address mask.Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff."
::= { me1200QosQceTableRowEditor 7 }
me1200QosQceTableRowEditorSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits source MAC address. The packets source address is
AND-ed with the value of SrcMacMask and then compared against the value
of this object. If this object value and the value of SrcMacMask is
00-00-00-00-00-00, this entry matches any source MAC address. This
object can only be configured if SrcMacMask is ff-ff-ff-ff-ff-ff."
::= { me1200QosQceTableRowEditor 8 }
me1200QosQceTableRowEditorSrcMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 48 bits source MAC address mask. Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff."
::= { me1200QosQceTableRowEditor 9 }
me1200QosQceTableRowEditorVlanTagType OBJECT-TYPE
SYNTAX ME1200VlanTagType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN tag type to match."
::= { me1200QosQceTableRowEditor 10 }
me1200QosQceTableRowEditorVlanIdOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packets's VLAN ID is to be compared."
::= { me1200QosQceTableRowEditor 11 }
me1200QosQceTableRowEditorVlanId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the starting VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is not
any(0)."
::= { me1200QosQceTableRowEditor 12 }
me1200QosQceTableRowEditorVlanIdRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the ending VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is
range(2)."
::= { me1200QosQceTableRowEditor 13 }
me1200QosQceTableRowEditorPcp OBJECT-TYPE
SYNTAX ME1200VlanTagPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value(s) to be compared."
::= { me1200QosQceTableRowEditor 14 }
me1200QosQceTableRowEditorDei OBJECT-TYPE
SYNTAX ME1200BitType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DEI value to be compared. Valid range is 0-1."
::= { me1200QosQceTableRowEditor 15 }
me1200QosQceTableRowEditorInnerVlanTagType OBJECT-TYPE
SYNTAX ME1200VlanTagType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the inner VLAN tag type to match."
::= { me1200QosQceTableRowEditor 16 }
me1200QosQceTableRowEditorInnerVlanIdOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packets's inner VLAN ID is to be compared."
::= { me1200QosQceTableRowEditor 17 }
me1200QosQceTableRowEditorInnerVlanId OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the starting VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp is not any(0)."
::= { me1200QosQceTableRowEditor 18 }
me1200QosQceTableRowEditorInnerVlanIdRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the ending VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp is range(2)."
::= { me1200QosQceTableRowEditor 19 }
me1200QosQceTableRowEditorInnerPcp OBJECT-TYPE
SYNTAX ME1200VlanTagPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner PCP value(s) to be compared."
::= { me1200QosQceTableRowEditor 20 }
me1200QosQceTableRowEditorInnerDei OBJECT-TYPE
SYNTAX ME1200BitType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inner DEI value to be compared. Valid range is 0-1."
::= { me1200QosQceTableRowEditor 21 }
me1200QosQceTableRowEditorFrameType OBJECT-TYPE
SYNTAX ME1200QceFrameType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet's frame type. Modifying the frame type on an
existing QCE will restore the content of all frame type dependent
configuration to default."
::= { me1200QosQceTableRowEditor 100 }
me1200QosQceTableRowEditorEtype OBJECT-TYPE
SYNTAX ME1200EtherType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet's 16 bit Ethernet type field. Valid values are:
0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and
0x86DD(IPv6).This object can only be configured if FrameType is
etype(1)."
::= { me1200QosQceTableRowEditor 101 }
me1200QosQceTableRowEditorLlcDsap OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP
field is AND-ed with the value of LlcDsapMask and then compared against
the value of this object. If this object value and the value of
LlcDsapMask is 0x00, this entry matches any LLC DSAP. Valid range is
0x00-0xFF. This object can only be configured if FrameType is llc(2)."
::= { me1200QosQceTableRowEditor 200 }
me1200QosQceTableRowEditorLlcDsapMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2)."
::= { me1200QosQceTableRowEditor 201 }
me1200QosQceTableRowEditorLlcSsap OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP
field is AND-ed with the value of LlcSsapMask and then compared against
the value of this object. If this object value and the value of
LlcSsapMask is 0x00, this entry matches any LLC SSAP. Valid range is
0x00-0xFF. This object can only be configured if FrameType is llc(2)."
::= { me1200QosQceTableRowEditor 202 }
me1200QosQceTableRowEditorLlcSsapMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2)."
::= { me1200QosQceTableRowEditor 203 }
me1200QosQceTableRowEditorLlcControl OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packets's 8 bit LLC Control field. The packets LLC
Control field is AND-ed with the value of LlcControlMask and then
compared against the value of this object. If this object value and the
value of LlcControlMask is 0x00, this entry matches any LLC Control.
Valid range is 0x00-0xFF. This object can only be configured if
FrameType is llc(2)."
::= { me1200QosQceTableRowEditor 204 }
me1200QosQceTableRowEditorLlcControlMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF.
This object can only be configured if FrameType is llc(2)."
::= { me1200QosQceTableRowEditor 205 }
me1200QosQceTableRowEditorSnapPid OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the packet's 16 bit SNAP PID field. The packets SNAP PID
field is AND-ed with the value of SnapPidMask and then compared against
the value of this object. If this object value and the value of
SnapPidMask is 0x0000, this entry matches any ethertype. This object
can only be configured if FrameType is snap(3)."
::= { me1200QosQceTableRowEditor 302 }
me1200QosQceTableRowEditorSnapPidMask OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF.
This object can only be configured if FrameType is snap(3)."
::= { me1200QosQceTableRowEditor 303 }
me1200QosQceTableRowEditorIpv4Fragment OBJECT-TYPE
SYNTAX ME1200BitType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how an IPv4 fragment bit is to be compared. This object can
only be configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 400 }
me1200QosQceTableRowEditorIpv4DscpOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how an IPv4 DSCP field is to be compared. This object can
only be configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 401 }
me1200QosQceTableRowEditorIpv4Dscp OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4) and Ipv4DscpOp is not any(0)."
::= { me1200QosQceTableRowEditor 402 }
me1200QosQceTableRowEditorIpv4DscpRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4) and Ipv4DscpOp is range(2)."
::= { me1200QosQceTableRowEditor 403 }
me1200QosQceTableRowEditorIpv4Protocol OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol number field in the IPv4 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv4ProtocolMask and then compared with the value of this
object. If Ipv4Protocol and Ipv4protocolMask are 0, this entry matches
any IPv4 protocol. Valid range is 0-255. This object can only be
configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 404 }
me1200QosQceTableRowEditorIpv4ProtocolMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 405 }
me1200QosQceTableRowEditorIpv4SrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 source address. The packets source address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIP and Ipv4SrcIpMask are 0.0.0.0, this entry
matches any IPv4 source address. This object can only be configured if
FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 406 }
me1200QosQceTableRowEditorIpv4SrcIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 source address mask. This object can only be
configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 407 }
me1200QosQceTableRowEditorIpv4DestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 destination address. The packets destination address
is AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIP and Ipv4DestIpMask are 0.0.0.0,
this entry matches any IPv4 destination address. This object can only
be configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 408 }
me1200QosQceTableRowEditorIpv4DestIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv4 destination address mask. This object can only be
configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 409 }
me1200QosQceTableRowEditorIpv4SrcPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 410 }
me1200QosQceTableRowEditorIpv4SrcPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is not
any(0)."
::= { me1200QosQceTableRowEditor 411 }
me1200QosQceTableRowEditorIpv4SrcPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is range(2)."
::= { me1200QosQceTableRowEditor 412 }
me1200QosQceTableRowEditorIpv4DestPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(4)."
::= { me1200QosQceTableRowEditor 413 }
me1200QosQceTableRowEditorIpv4DestPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv4(4) and
Ipv4DestPortOp is not any(0)."
::= { me1200QosQceTableRowEditor 414 }
me1200QosQceTableRowEditorIpv4DestPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv4(4) and
Ipv4DestPortOp is range(2)."
::= { me1200QosQceTableRowEditor 415 }
me1200QosQceTableRowEditorIpv6DscpOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how an IPv6 DSCP field is to be compared. This object can
only be configured if FrameType is ipv6(5)."
::= { me1200QosQceTableRowEditor 500 }
me1200QosQceTableRowEditorIpv6Dscp OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5) and Ipv6DscpOp is not any(0)."
::= { me1200QosQceTableRowEditor 501 }
me1200QosQceTableRowEditorIpv6DscpRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5) and Ipv6DscpOp is range(2)."
::= { me1200QosQceTableRowEditor 502 }
me1200QosQceTableRowEditorIpv6Protocol OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol number field in the IPv6 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv6ProtocolMask and then compared with the value of this
object. If Ipv46rotocol and Ipv6protocolMask are 0, this entry matches
any IPv6 protocol. Valid range is 0-255. This object can only be
configured if FrameType is ipv6(5)."
::= { me1200QosQceTableRowEditor 503 }
me1200QosQceTableRowEditorIpv6ProtocolMask OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv6(5)."
::= { me1200QosQceTableRowEditor 504 }
me1200QosQceTableRowEditorIpv6SrcIp OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIP and Ipv6SrcIpMask are all zeros, this entry
matches any IPv6 source address. Only the least significant 32 bits of
this object are used. This object can only be configured if FrameType
is ipv6(5)."
::= { me1200QosQceTableRowEditor 506 }
me1200QosQceTableRowEditorIpv6SrcIpMask OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(5)."
::= { me1200QosQceTableRowEditor 508 }
me1200QosQceTableRowEditorIpv6DestIp OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 destination address. The packets destination address
is AND-ed with the value of Ipv6DestIpMask and then compared with the
value of this object. If Ipv6DestIP and Ipv6DestIpMask are all zeros,
this entry matches any IPv6 destination address. Only the least
significant 32 bits of this object are used. This object can only be
configured if FrameType is ipv6(5)."
::= { me1200QosQceTableRowEditor 510 }
me1200QosQceTableRowEditorIpv6DestIpMask OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specified IPv6 destination address mask. Only the least significant
32 bits of this object are used. This object can only be configured if
FrameType is ipv6(5)."
::= { me1200QosQceTableRowEditor 512 }
me1200QosQceTableRowEditorIpv6SrcPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(5)."
::= { me1200QosQceTableRowEditor 513 }
me1200QosQceTableRowEditorIpv6SrcPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is not
any(0)."
::= { me1200QosQceTableRowEditor 514 }
me1200QosQceTableRowEditorIpv6SrcPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is range(2)."
::= { me1200QosQceTableRowEditor 515 }
me1200QosQceTableRowEditorIpv6DestPortOp OBJECT-TYPE
SYNTAX ME1200ASRType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(5)."
::= { me1200QosQceTableRowEditor 516 }
me1200QosQceTableRowEditorIpv6DestPort OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv6(5) and
Ipv6DestPortOp is not any(0)."
::= { me1200QosQceTableRowEditor 517 }
me1200QosQceTableRowEditorIpv6DestPortRange OBJECT-TYPE
SYNTAX ME1200Unsigned16
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv6(5) and
Ipv6DestPortOp is range(2)."
::= { me1200QosQceTableRowEditor 518 }
me1200QosQceTableRowEditorActionCosEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the CoS value in ActionCos."
::= { me1200QosQceTableRowEditor 1000 }
me1200QosQceTableRowEditorActionCos OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CoS value used for classification. Valid range is 0-7."
::= { me1200QosQceTableRowEditor 1001 }
me1200QosQceTableRowEditorActionDplEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the DPL value in ActionDpl."
::= { me1200QosQceTableRowEditor 1002 }
me1200QosQceTableRowEditorActionDpl OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DPL value used for classification. Valid range is 0-1."
::= { me1200QosQceTableRowEditor 1003 }
me1200QosQceTableRowEditorActionDscpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the DSCP value in ActionDscp."
::= { me1200QosQceTableRowEditor 1004 }
me1200QosQceTableRowEditorActionDscp OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value used for classification. Valid range is 0-1."
::= { me1200QosQceTableRowEditor 1005 }
me1200QosQceTableRowEditorActionPcpDeiEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the PCP value in ActionPcp and the
DEI value in ActionDei."
::= { me1200QosQceTableRowEditor 1006 }
me1200QosQceTableRowEditorActionPcp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value used for classification. Valid range is 0-7."
::= { me1200QosQceTableRowEditor 1007 }
me1200QosQceTableRowEditorActionDei OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DEI value used for classification. Valid range is 0-1."
::= { me1200QosQceTableRowEditor 1008 }
me1200QosQceTableRowEditorActionPolicyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the packet is classified to the policy number in ActionPolicy."
::= { me1200QosQceTableRowEditor 1009 }
me1200QosQceTableRowEditorActionPolicy OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The policy number used for classification. Valid range is 0-63."
::= { me1200QosQceTableRowEditor 1010 }
me1200QosQceTableRowEditorAction OBJECT-TYPE
SYNTAX ME1200RowEditorState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action"
::= { me1200QosQceTableRowEditor 10000 }
me1200QosQcePrecedenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosQcePrecedenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the precedence of QCEs ordered by their position in
the QCL."
::= { me1200QosQce 3 }
me1200QosQcePrecedenceEntry OBJECT-TYPE
SYNTAX ME1200QosQcePrecedenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the precedence of a single QCE."
INDEX { me1200QosQcePrecedenceIndex }
::= { me1200QosQcePrecedenceTable 1 }
ME1200QosQcePrecedenceEntry ::= SEQUENCE {
me1200QosQcePrecedenceIndex Integer32,
me1200QosQcePrecedenceQceId Unsigned32
}
me1200QosQcePrecedenceIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QCE precedence index. Indicates the position in QCL."
::= { me1200QosQcePrecedenceEntry 1 }
me1200QosQcePrecedenceQceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QCE Id."
::= { me1200QosQcePrecedenceEntry 2 }
me1200QosInterface OBJECT IDENTIFIER
::= { me1200QosConfig 2 }
me1200QosIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides QoS configuration for QoS manageable interfaces"
::= { me1200QosInterface 1 }
me1200QosIfConfigEntry OBJECT-TYPE
SYNTAX ME1200QosIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration for a specific interface"
INDEX { me1200QosIfConfigIfIndex }
::= { me1200QosIfConfigTable 1 }
ME1200QosIfConfigEntry ::= SEQUENCE {
me1200QosIfConfigIfIndex ME1200InterfaceIndex,
me1200QosIfConfigCos Unsigned32,
me1200QosIfConfigDpl ME1200Unsigned8,
me1200QosIfConfigPcp Unsigned32,
me1200QosIfConfigDei ME1200Unsigned8,
me1200QosIfConfigTrustTag TruthValue,
me1200QosIfConfigTrustDscp TruthValue,
me1200QosIfConfigDwrrCount ME1200Unsigned8,
me1200QosIfConfigTagRemarkingMode ME1200TagRemarkingMode,
me1200QosIfConfigTagPcp Unsigned32,
me1200QosIfConfigTagDei ME1200Unsigned8,
me1200QosIfConfigDscpTranslate TruthValue,
me1200QosIfConfigDscpClassify ME1200DscpClassify,
me1200QosIfConfigDscpRemark ME1200DscpRemark,
me1200QosIfConfigQceAddressMode TruthValue,
me1200QosIfConfigQceKeyType ME1200VcapKeyType
}
me1200QosIfConfigIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosIfConfigEntry 1 }
me1200QosIfConfigCos OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default CoS value a packet is classified to. Valid range is 0-7."
::= { me1200QosIfConfigEntry 2 }
me1200QosIfConfigDpl OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default DPL (Drop Precedence Level) a packet is classified to.
Valid range is 0-1."
::= { me1200QosIfConfigEntry 3 }
me1200QosIfConfigPcp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default PCP value a packet is classified to. Valid range is 0-7."
::= { me1200QosIfConfigEntry 4 }
me1200QosIfConfigDei OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default DEI value a packet is classified to. Valid range is 0-1."
::= { me1200QosIfConfigEntry 5 }
me1200QosIfConfigTrustTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true and the packet is VLAN tagged, then the CoS and DPL assigned to
the packet is the PCP and DEI value in the packet mapped to a CoS and
DPL value defined in the qosTagToCosTable."
::= { me1200QosIfConfigEntry 6 }
me1200QosIfConfigTrustDscp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true and the packet type is IPv4 or IPv6 and the packet DSCP value
is trusted in qosDscpTable, then the CoS and DPL assigned to the packet
is the DSCP value in the packet mapped to a CoS and DPL value defined
in the qosDscpTable."
::= { me1200QosIfConfigEntry 7 }
me1200QosIfConfigDwrrCount OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of queues that are running Deficit Weighted Round Robin
scheduling. This value is restricted to 0 or 6."
::= { me1200QosIfConfigEntry 8 }
me1200QosIfConfigTagRemarkingMode OBJECT-TYPE
SYNTAX ME1200TagRemarkingMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the tag remarking mode for egress. Valid values are:
'classified' : Remark the tag with the classified values of PCP and
DEI.
'default' : Remark the tag with the configured TagPcp and TagDei.
'mapped' : Remark the tag with the values from the classified CoS and
DPL mapped through the qosCosToTagTable"
::= { me1200QosIfConfigEntry 9 }
me1200QosIfConfigTagPcp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value to put in the packet if TagRemarkingMode is set to
'default'. Valid range is 0-7."
::= { me1200QosIfConfigEntry 10 }
me1200QosIfConfigTagDei OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DEI value to put in the packet if TagRemarkingMode is set to
'default'. Valid range is 0-1."
::= { me1200QosIfConfigEntry 11 }
me1200QosIfConfigDscpTranslate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true then the classified DSCP value is the DSCP value in the packed
mapped to a new DSCP value defined in qosDscpTable.IngressTranslation."
::= { me1200QosIfConfigEntry 12 }
me1200QosIfConfigDscpClassify OBJECT-TYPE
SYNTAX ME1200DscpClassify
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects if and how the classified DSCP is based on the classified CoS
and DPL for IPv4 and IPv6 packets on ingress.
If a packet is selected for being classified to a new DSCP, the
classification in based on the classified CoS mapped to a new DSCP
value through the qosCosToDscpTable. If the classified DPL is 1, the
new DSCP value is taken from the DscpDp1 entry, otherwise it is taken
from the Dscp entry. Valid values are:
'none' : Always classify to the DSCP value in the received packet and
ignore the classified CoS and DPL.
'zero' : If the DSCP value in the received packet is 0, then classify
to a new DSCP value based on the classified CoS and DPL.
'selected' : If the DSCP value in the received packet is enabled in
qosDscpTable.Classify, then classify to a new DSCP value based on the
classified CoS and DPL.
'all' : Always classify to a new DSCP value based on the classified CoS
and DPL.
"
::= { me1200QosIfConfigEntry 13 }
me1200QosIfConfigDscpRemark OBJECT-TYPE
SYNTAX ME1200DscpRemark
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects if and how the classified DSCP is written into the packet at
egress. Valid values are:
'disabled' : Do not write the classified DSCP into the packet.
'rewrite' : Write the classified DSCP into the packet.
'remap' : Remap the classified DSCP through qosDscpTable, and write the
value from EgressTranslation into the packet.
'remap-dp' : Remap the classified DSCP through qosDscpTable. If the
classified DPL is 0 then write the value from EgressTranslation into
the packet, otherwise write the value from EgressTranslationDp1 into
the packet.
"
::= { me1200QosIfConfigEntry 14 }
me1200QosIfConfigQceAddressMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If false, the QCE classification for this interface is based on source
(SMAC/SIP) addresses. If true, the QCE classification for this
interface is based on destination (DMAC/DIP) addresses. This parameter
is only used when the QceKeyType is Normal."
::= { me1200QosIfConfigEntry 15 }
me1200QosIfConfigQceKeyType OBJECT-TYPE
SYNTAX ME1200VcapKeyType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The key type specifying the key generated for packets received on the
interface. Valid values are:
'normal' : Half key, match outer tag, SIP and SMAC.
'double-tag' : Quarter key, match inner and outer tag.
'ip-addr' : Half key, match inner and outer tag, SIP and DIP. For
non-IP frames, match outer tag only.
'mac-ip-addr' : Full key, match inner and outer tag, SMAC, DMAC, SIP
and DIP.
Filtering on DMAC type (unicast/multicast/broadcast) is supported for
any key type."
::= { me1200QosIfConfigEntry 16 }
me1200QosIfTagToCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosIfTagToCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the mapping of (interface, PCP, DEI) to (CoS, DPL)
values.The mappings given by this table is used for all tagged packets
received on an interface if and only if that interface has the value of
TrustTag set to 'true'"
::= { me1200QosInterface 2 }
me1200QosIfTagToCosEntry OBJECT-TYPE
SYNTAX ME1200QosIfTagToCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the mapping from (interface, PCP, DEI) to (CoS, DPL)
values."
INDEX { me1200QosIfTagToCosIfIndex, me1200QosIfTagToCosPcp, me1200QosIfTagToCosDei }
::= { me1200QosIfTagToCosTable 1 }
ME1200QosIfTagToCosEntry ::= SEQUENCE {
me1200QosIfTagToCosIfIndex ME1200InterfaceIndex,
me1200QosIfTagToCosPcp Integer32,
me1200QosIfTagToCosDei Integer32,
me1200QosIfTagToCosCos Unsigned32,
me1200QosIfTagToCosDpl ME1200Unsigned8
}
me1200QosIfTagToCosIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosIfTagToCosEntry 1 }
me1200QosIfTagToCosPcp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PCP index."
::= { me1200QosIfTagToCosEntry 2 }
me1200QosIfTagToCosDei OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DEI index."
::= { me1200QosIfTagToCosEntry 3 }
me1200QosIfTagToCosCos OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CoS value which this entry maps to. Valid range is 0-7."
::= { me1200QosIfTagToCosEntry 4 }
me1200QosIfTagToCosDpl OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DPL (Drop Precedence Level) value which this entry maps to. Valid
range is 0-1."
::= { me1200QosIfTagToCosEntry 5 }
me1200QosIfCosToTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosIfCosToTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the mapping of (interface, CoS, DPL) to (PCP, DEI)
values.The mappings given by this table is used for packets transmitted
on an interface if and only if that interface has the value of
TagRemarkingMode set to 'mapped'"
::= { me1200QosInterface 3 }
me1200QosIfCosToTagEntry OBJECT-TYPE
SYNTAX ME1200QosIfCosToTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the mapping from (interface, CoS, DPL) to (PCP, DEI)
values."
INDEX { me1200QosIfCosToTagIfIndex, me1200QosIfCosToTagCos, me1200QosIfCosToTagDpl }
::= { me1200QosIfCosToTagTable 1 }
ME1200QosIfCosToTagEntry ::= SEQUENCE {
me1200QosIfCosToTagIfIndex ME1200InterfaceIndex,
me1200QosIfCosToTagCos Integer32,
me1200QosIfCosToTagDpl Integer32,
me1200QosIfCosToTagPcp Unsigned32,
me1200QosIfCosToTagDei ME1200Unsigned8
}
me1200QosIfCosToTagIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosIfCosToTagEntry 1 }
me1200QosIfCosToTagCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CoS index."
::= { me1200QosIfCosToTagEntry 2 }
me1200QosIfCosToTagDpl OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DPL index."
::= { me1200QosIfCosToTagEntry 3 }
me1200QosIfCosToTagPcp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PCP value which this entry maps to. Valid range is 0-7."
::= { me1200QosIfCosToTagEntry 4 }
me1200QosIfCosToTagDei OBJECT-TYPE
SYNTAX ME1200Unsigned8
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DEI value which this entry maps to. Valid range is 0-1."
::= { me1200QosIfCosToTagEntry 5 }
me1200QosIfPolicerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosIfPolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides policer configuration for an interface"
::= { me1200QosInterface 4 }
me1200QosIfPolicerEntry OBJECT-TYPE
SYNTAX ME1200QosIfPolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration for a specific policer"
INDEX { me1200QosIfPolicerIfIndex }
::= { me1200QosIfPolicerTable 1 }
ME1200QosIfPolicerEntry ::= SEQUENCE {
me1200QosIfPolicerIfIndex ME1200InterfaceIndex,
me1200QosIfPolicerEnable TruthValue,
me1200QosIfPolicerFrameRate TruthValue,
me1200QosIfPolicerFlowControl TruthValue,
me1200QosIfPolicerCir Unsigned32
}
me1200QosIfPolicerIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosIfPolicerEntry 1 }
me1200QosIfPolicerEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the port policer is enabled."
::= { me1200QosIfPolicerEntry 2 }
me1200QosIfPolicerFrameRate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the rate is measured in fps instead of kbps."
::= { me1200QosIfPolicerEntry 3 }
me1200QosIfPolicerFlowControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, and flow control is enabled on the interface, then issue flow
control pause frames instead of discarding frames."
::= { me1200QosIfPolicerEntry 4 }
me1200QosIfPolicerCir OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Committed Information Rate. Measured in kbps if FrameRate is false and
fps if FrameRate is true. Valid range is 100-3300000."
::= { me1200QosIfPolicerEntry 5 }
me1200QosIfQueuePolicerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosIfQueuePolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides queue policer configuration for interfaces"
::= { me1200QosInterface 5 }
me1200QosIfQueuePolicerEntry OBJECT-TYPE
SYNTAX ME1200QosIfQueuePolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration for a specific queue policer"
INDEX { me1200QosIfQueuePolicerIfIndex, me1200QosIfQueuePolicerQueue }
::= { me1200QosIfQueuePolicerTable 1 }
ME1200QosIfQueuePolicerEntry ::= SEQUENCE {
me1200QosIfQueuePolicerIfIndex ME1200InterfaceIndex,
me1200QosIfQueuePolicerQueue Integer32,
me1200QosIfQueuePolicerEnable TruthValue,
me1200QosIfQueuePolicerCir Unsigned32
}
me1200QosIfQueuePolicerIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosIfQueuePolicerEntry 1 }
me1200QosIfQueuePolicerQueue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue index."
::= { me1200QosIfQueuePolicerEntry 2 }
me1200QosIfQueuePolicerEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the queue policer is enabled."
::= { me1200QosIfQueuePolicerEntry 3 }
me1200QosIfQueuePolicerCir OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Committed Information Rate. Measured in kbps. Valid range is
100-3300000."
::= { me1200QosIfQueuePolicerEntry 6 }
me1200QosIfShaperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosIfShaperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides shaper configuration for an interface"
::= { me1200QosInterface 6 }
me1200QosIfShaperEntry OBJECT-TYPE
SYNTAX ME1200QosIfShaperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration for a specific shaper"
INDEX { me1200QosIfShaperIfIndex }
::= { me1200QosIfShaperTable 1 }
ME1200QosIfShaperEntry ::= SEQUENCE {
me1200QosIfShaperIfIndex ME1200InterfaceIndex,
me1200QosIfShaperEnable TruthValue,
me1200QosIfShaperCir Unsigned32
}
me1200QosIfShaperIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosIfShaperEntry 1 }
me1200QosIfShaperEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the port shaper is enabled."
::= { me1200QosIfShaperEntry 2 }
me1200QosIfShaperCir OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Committed Information Rate. Measured in kbps. Valid range is
100-3300000."
::= { me1200QosIfShaperEntry 3 }
me1200QosIfQueueShaperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosIfQueueShaperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides queue shaper configuration for interfaces"
::= { me1200QosInterface 7 }
me1200QosIfQueueShaperEntry OBJECT-TYPE
SYNTAX ME1200QosIfQueueShaperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the configuration for a specific queue shaper"
INDEX { me1200QosIfQueueShaperIfIndex, me1200QosIfQueueShaperQueue }
::= { me1200QosIfQueueShaperTable 1 }
ME1200QosIfQueueShaperEntry ::= SEQUENCE {
me1200QosIfQueueShaperIfIndex ME1200InterfaceIndex,
me1200QosIfQueueShaperQueue Integer32,
me1200QosIfQueueShaperEnable TruthValue,
me1200QosIfQueueShaperExcess TruthValue,
me1200QosIfQueueShaperCir Unsigned32
}
me1200QosIfQueueShaperIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosIfQueueShaperEntry 1 }
me1200QosIfQueueShaperQueue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue index."
::= { me1200QosIfQueueShaperEntry 2 }
me1200QosIfQueueShaperEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, the queue shaper is enabled."
::= { me1200QosIfQueueShaperEntry 3 }
me1200QosIfQueueShaperExcess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, then allow this queue to get a share of the excess bandwidth.
Excess bandwidth is allowed if this shaper is closed and no other
queues with open shapers have frames for transmission."
::= { me1200QosIfQueueShaperEntry 4 }
me1200QosIfQueueShaperCir OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Committed Information Rate. Measured in kbps. Valid range is
100-3300000."
::= { me1200QosIfQueueShaperEntry 5 }
me1200QosIfSchedulerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosIfSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the mapping of (interface, queue) to weight
values.The mappings given by this table is used when an interface has
the value of DwrrCount greater than 0. Read the qosSchedulerStatusTable
in order to get the 'real' weights in percent as used by the hardware"
::= { me1200QosInterface 8 }
me1200QosIfSchedulerEntry OBJECT-TYPE
SYNTAX ME1200QosIfSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the scheduler configuration for a specific queue."
INDEX { me1200QosIfSchedulerIfIndex, me1200QosIfSchedulerQueue }
::= { me1200QosIfSchedulerTable 1 }
ME1200QosIfSchedulerEntry ::= SEQUENCE {
me1200QosIfSchedulerIfIndex ME1200InterfaceIndex,
me1200QosIfSchedulerQueue Integer32,
me1200QosIfSchedulerWeight ME1200Percent
}
me1200QosIfSchedulerIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosIfSchedulerEntry 1 }
me1200QosIfSchedulerQueue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue index."
::= { me1200QosIfSchedulerEntry 2 }
me1200QosIfSchedulerWeight OBJECT-TYPE
SYNTAX ME1200Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The weight for this queue. Valid range is 1-100."
::= { me1200QosIfSchedulerEntry 3 }
me1200QosStatus OBJECT IDENTIFIER
::= { me1200QosMIBObjects 3 }
me1200QosStatusGlobals OBJECT IDENTIFIER
::= { me1200QosStatus 1 }
me1200QosStatusQceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosStatusQceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the QCE status in the hardware table."
::= { me1200QosStatusGlobals 1 }
me1200QosStatusQceEntry OBJECT-TYPE
SYNTAX ME1200QosStatusQceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the status of a single QCE."
INDEX { me1200QosStatusQceIndex }
::= { me1200QosStatusQceTable 1 }
ME1200QosStatusQceEntry ::= SEQUENCE {
me1200QosStatusQceIndex Integer32,
me1200QosStatusQceUserId ME1200QceUserType,
me1200QosStatusQceQceId Unsigned32,
me1200QosStatusQceConflict TruthValue
}
me1200QosStatusQceIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QCE precedence index. Indicates the position in QCL."
::= { me1200QosStatusQceEntry 2 }
me1200QosStatusQceUserId OBJECT-TYPE
SYNTAX ME1200QceUserType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User Id."
::= { me1200QosStatusQceEntry 3 }
me1200QosStatusQceQceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QCE Id."
::= { me1200QosStatusQceEntry 4 }
me1200QosStatusQceConflict OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, a resource conflict is detected."
::= { me1200QosStatusQceEntry 100 }
me1200QosStatusInterface OBJECT IDENTIFIER
::= { me1200QosStatus 2 }
me1200QosStatusIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosStatusIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides QoS status for QoS manageable interfaces"
::= { me1200QosStatusInterface 1 }
me1200QosStatusIfEntry OBJECT-TYPE
SYNTAX ME1200QosStatusIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the status for a specific interface"
INDEX { me1200QosStatusIfIfIndex }
::= { me1200QosStatusIfTable 1 }
ME1200QosStatusIfEntry ::= SEQUENCE {
me1200QosStatusIfIfIndex ME1200InterfaceIndex,
me1200QosStatusIfCos Unsigned32
}
me1200QosStatusIfIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosStatusIfEntry 1 }
me1200QosStatusIfCos OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Some subsystems are allowed to modify the default CoS value for an
interface. This object shows the actual default CoS value a packet is
classified to."
::= { me1200QosStatusIfEntry 2 }
me1200QosStatusIfSchedulerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ME1200QosStatusIfSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the mapping of (interface, queue) to weight
values.The mappings given by this table are the 'real' weights in
percent as used by the hardware"
::= { me1200QosStatusInterface 2 }
me1200QosStatusIfSchedulerEntry OBJECT-TYPE
SYNTAX ME1200QosStatusIfSchedulerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the scheduler status for a specific queue."
INDEX { me1200QosStatusIfSchedulerIfIndex, me1200QosStatusIfSchedulerQueue }
::= { me1200QosStatusIfSchedulerTable 1 }
ME1200QosStatusIfSchedulerEntry ::= SEQUENCE {
me1200QosStatusIfSchedulerIfIndex ME1200InterfaceIndex,
me1200QosStatusIfSchedulerQueue Integer32,
me1200QosStatusIfSchedulerWeight ME1200Percent
}
me1200QosStatusIfSchedulerIfIndex OBJECT-TYPE
SYNTAX ME1200InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Logical interface index."
::= { me1200QosStatusIfSchedulerEntry 1 }
me1200QosStatusIfSchedulerQueue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue index."
::= { me1200QosStatusIfSchedulerEntry 2 }
me1200QosStatusIfSchedulerWeight OBJECT-TYPE
SYNTAX ME1200Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The weight for this queue. Valid range is 1-100."
::= { me1200QosStatusIfSchedulerEntry 3 }
me1200QosControl OBJECT IDENTIFIER
::= { me1200QosMIBObjects 4 }
me1200QosControlGlobals OBJECT IDENTIFIER
::= { me1200QosControl 1 }
me1200QosControlGlobalsConflictResolve OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to true to resolve resource conflicts.
If different components, such as ACEs, ECEs, VCEs, QCEs, competes for
the same resources in the switch, it is possible that some of resources
needed by one or more QCE are not available. These conflicts, if any,
are shown in the qosQceStatusTable.
To solve these conflicts, you must delete one or more of the competing
settings and set ConflictResolve to true. The switch will then reapply
the current QCE configuration."
::= { me1200QosControlGlobals 1 }
me1200QosMIBConformance OBJECT IDENTIFIER
::= { me1200QosMIB 3 }
me1200QosMIBCompliances OBJECT IDENTIFIER
::= { me1200QosMIBConformance 1 }
me1200QosMIBGroups OBJECT IDENTIFIER
::= { me1200QosMIBConformance 2 }
me1200QosStormPolicerUnicastInfoGroup OBJECT-GROUP
OBJECTS { me1200QosStormPolicerUnicastEnable,
me1200QosStormPolicerUnicastRate }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 1 }
me1200QosStormPolicerMulticastInfoGroup OBJECT-GROUP
OBJECTS { me1200QosStormPolicerMulticastEnable,
me1200QosStormPolicerMulticastRate }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 2 }
me1200QosStormPolicerBroadcastInfoGroup OBJECT-GROUP
OBJECTS { me1200QosStormPolicerBroadcastEnable,
me1200QosStormPolicerBroadcastRate }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 3 }
me1200QosWredTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosWredEnable, me1200QosWredMinimumFillLevel, me1200QosWredMaximum,
me1200QosWredMaxSelector }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 4 }
me1200QosDscpTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosDscpTrust, me1200QosDscpCos, me1200QosDscpDpl,
me1200QosDscpIngressTranslation, me1200QosDscpClassify,
me1200QosDscpEgressTranslation, me1200QosDscpEgressTranslationDp1 }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 5 }
me1200QosCosToDscpTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosCosToDscpDscp, me1200QosCosToDscpDscpDp1 }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 6 }
me1200QosQceTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosQceNextQceId, me1200QosQcePortList, me1200QosQceDestMacType,
me1200QosQceDestMac, me1200QosQceDestMacMask, me1200QosQceSrcMac,
me1200QosQceSrcMacMask, me1200QosQceVlanTagType, me1200QosQceVlanIdOp,
me1200QosQceVlanId, me1200QosQceVlanIdRange, me1200QosQcePcp, me1200QosQceDei,
me1200QosQceInnerVlanTagType, me1200QosQceInnerVlanIdOp,
me1200QosQceInnerVlanId, me1200QosQceInnerVlanIdRange,
me1200QosQceInnerPcp, me1200QosQceInnerDei, me1200QosQceFrameType,
me1200QosQceEtype, me1200QosQceLlcDsap, me1200QosQceLlcDsapMask,
me1200QosQceLlcSsap, me1200QosQceLlcSsapMask, me1200QosQceLlcControl,
me1200QosQceLlcControlMask, me1200QosQceSnapPid, me1200QosQceSnapPidMask,
me1200QosQceIpv4Fragment, me1200QosQceIpv4DscpOp, me1200QosQceIpv4Dscp,
me1200QosQceIpv4DscpRange, me1200QosQceIpv4Protocol,
me1200QosQceIpv4ProtocolMask, me1200QosQceIpv4SrcIp,
me1200QosQceIpv4SrcIpMask, me1200QosQceIpv4DestIp,
me1200QosQceIpv4DestIpMask, me1200QosQceIpv4SrcPortOp,
me1200QosQceIpv4SrcPort, me1200QosQceIpv4SrcPortRange,
me1200QosQceIpv4DestPortOp, me1200QosQceIpv4DestPort,
me1200QosQceIpv4DestPortRange, me1200QosQceIpv6DscpOp,
me1200QosQceIpv6Dscp, me1200QosQceIpv6DscpRange,
me1200QosQceIpv6Protocol, me1200QosQceIpv6ProtocolMask,
me1200QosQceIpv6SrcIp, me1200QosQceIpv6SrcIpMask, me1200QosQceIpv6DestIp,
me1200QosQceIpv6DestIpMask, me1200QosQceIpv6SrcPortOp,
me1200QosQceIpv6SrcPort, me1200QosQceIpv6SrcPortRange,
me1200QosQceIpv6DestPortOp, me1200QosQceIpv6DestPort,
me1200QosQceIpv6DestPortRange, me1200QosQceActionCosEnable,
me1200QosQceActionCos, me1200QosQceActionDplEnable,
me1200QosQceActionDpl, me1200QosQceActionDscpEnable,
me1200QosQceActionDscp, me1200QosQceActionPcpDeiEnable,
me1200QosQceActionPcp, me1200QosQceActionDei,
me1200QosQceActionPolicyEnable, me1200QosQceActionPolicy,
me1200QosQceAction }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 7 }
me1200QosQceTableRowEditorInfoGroup OBJECT-GROUP
OBJECTS { me1200QosQceTableRowEditorQceId,
me1200QosQceTableRowEditorNextQceId,
me1200QosQceTableRowEditorPortList,
me1200QosQceTableRowEditorDestMacType,
me1200QosQceTableRowEditorDestMac,
me1200QosQceTableRowEditorDestMacMask,
me1200QosQceTableRowEditorSrcMac,
me1200QosQceTableRowEditorSrcMacMask,
me1200QosQceTableRowEditorVlanTagType,
me1200QosQceTableRowEditorVlanIdOp,
me1200QosQceTableRowEditorVlanId,
me1200QosQceTableRowEditorVlanIdRange,
me1200QosQceTableRowEditorPcp, me1200QosQceTableRowEditorDei,
me1200QosQceTableRowEditorInnerVlanTagType,
me1200QosQceTableRowEditorInnerVlanIdOp,
me1200QosQceTableRowEditorInnerVlanId,
me1200QosQceTableRowEditorInnerVlanIdRange,
me1200QosQceTableRowEditorInnerPcp,
me1200QosQceTableRowEditorInnerDei,
me1200QosQceTableRowEditorFrameType,
me1200QosQceTableRowEditorEtype, me1200QosQceTableRowEditorLlcDsap,
me1200QosQceTableRowEditorLlcDsapMask,
me1200QosQceTableRowEditorLlcSsap,
me1200QosQceTableRowEditorLlcSsapMask,
me1200QosQceTableRowEditorLlcControl,
me1200QosQceTableRowEditorLlcControlMask,
me1200QosQceTableRowEditorSnapPid,
me1200QosQceTableRowEditorSnapPidMask,
me1200QosQceTableRowEditorIpv4Fragment,
me1200QosQceTableRowEditorIpv4DscpOp,
me1200QosQceTableRowEditorIpv4Dscp,
me1200QosQceTableRowEditorIpv4DscpRange,
me1200QosQceTableRowEditorIpv4Protocol,
me1200QosQceTableRowEditorIpv4ProtocolMask,
me1200QosQceTableRowEditorIpv4SrcIp,
me1200QosQceTableRowEditorIpv4SrcIpMask,
me1200QosQceTableRowEditorIpv4DestIp,
me1200QosQceTableRowEditorIpv4DestIpMask,
me1200QosQceTableRowEditorIpv4SrcPortOp,
me1200QosQceTableRowEditorIpv4SrcPort,
me1200QosQceTableRowEditorIpv4SrcPortRange,
me1200QosQceTableRowEditorIpv4DestPortOp,
me1200QosQceTableRowEditorIpv4DestPort,
me1200QosQceTableRowEditorIpv4DestPortRange,
me1200QosQceTableRowEditorIpv6DscpOp,
me1200QosQceTableRowEditorIpv6Dscp,
me1200QosQceTableRowEditorIpv6DscpRange,
me1200QosQceTableRowEditorIpv6Protocol,
me1200QosQceTableRowEditorIpv6ProtocolMask,
me1200QosQceTableRowEditorIpv6SrcIp,
me1200QosQceTableRowEditorIpv6SrcIpMask,
me1200QosQceTableRowEditorIpv6DestIp,
me1200QosQceTableRowEditorIpv6DestIpMask,
me1200QosQceTableRowEditorIpv6SrcPortOp,
me1200QosQceTableRowEditorIpv6SrcPort,
me1200QosQceTableRowEditorIpv6SrcPortRange,
me1200QosQceTableRowEditorIpv6DestPortOp,
me1200QosQceTableRowEditorIpv6DestPort,
me1200QosQceTableRowEditorIpv6DestPortRange,
me1200QosQceTableRowEditorActionCosEnable,
me1200QosQceTableRowEditorActionCos,
me1200QosQceTableRowEditorActionDplEnable,
me1200QosQceTableRowEditorActionDpl,
me1200QosQceTableRowEditorActionDscpEnable,
me1200QosQceTableRowEditorActionDscp,
me1200QosQceTableRowEditorActionPcpDeiEnable,
me1200QosQceTableRowEditorActionPcp,
me1200QosQceTableRowEditorActionDei,
me1200QosQceTableRowEditorActionPolicyEnable,
me1200QosQceTableRowEditorActionPolicy,
me1200QosQceTableRowEditorAction }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 8 }
me1200QosQcePrecedenceTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosQcePrecedenceQceId }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 9 }
me1200QosIfConfigTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosIfConfigCos, me1200QosIfConfigDpl, me1200QosIfConfigPcp,
me1200QosIfConfigDei, me1200QosIfConfigTrustTag,
me1200QosIfConfigTrustDscp, me1200QosIfConfigDwrrCount,
me1200QosIfConfigTagRemarkingMode, me1200QosIfConfigTagPcp,
me1200QosIfConfigTagDei, me1200QosIfConfigDscpTranslate,
me1200QosIfConfigDscpClassify, me1200QosIfConfigDscpRemark,
me1200QosIfConfigQceAddressMode, me1200QosIfConfigQceKeyType }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 10 }
me1200QosIfTagToCosTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosIfTagToCosCos, me1200QosIfTagToCosDpl }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 11 }
me1200QosIfCosToTagTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosIfCosToTagPcp, me1200QosIfCosToTagDei }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 12 }
me1200QosIfPolicerTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosIfPolicerEnable, me1200QosIfPolicerFrameRate,
me1200QosIfPolicerFlowControl, me1200QosIfPolicerCir }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 13 }
me1200QosIfQueuePolicerTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosIfQueuePolicerEnable, me1200QosIfQueuePolicerCir }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 14 }
me1200QosIfShaperTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosIfShaperEnable, me1200QosIfShaperCir }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 15 }
me1200QosIfQueueShaperTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosIfQueueShaperEnable, me1200QosIfQueueShaperExcess,
me1200QosIfQueueShaperCir }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 16 }
me1200QosIfSchedulerTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosIfSchedulerWeight }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 17 }
me1200QosStatusQceTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosStatusQceUserId, me1200QosStatusQceQceId,
me1200QosStatusQceConflict }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 18 }
me1200QosStatusIfTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosStatusIfCos }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 19 }
me1200QosStatusIfSchedulerTableInfoGroup OBJECT-GROUP
OBJECTS { me1200QosStatusIfSchedulerWeight }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 20 }
me1200QosControlGlobalsInfoGroup OBJECT-GROUP
OBJECTS { me1200QosControlGlobalsConflictResolve }
STATUS current
DESCRIPTION
"A collection of objects suitable for bulk operations."
::= { me1200QosMIBGroups 21 }
me1200QosMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the implementation."
MODULE -- this module
MANDATORY-GROUPS { me1200QosStormPolicerUnicastInfoGroup,
me1200QosStormPolicerMulticastInfoGroup,
me1200QosStormPolicerBroadcastInfoGroup,
me1200QosWredTableInfoGroup, me1200QosDscpTableInfoGroup,
me1200QosCosToDscpTableInfoGroup, me1200QosQceTableInfoGroup,
me1200QosQceTableRowEditorInfoGroup,
me1200QosQcePrecedenceTableInfoGroup,
me1200QosIfConfigTableInfoGroup, me1200QosIfTagToCosTableInfoGroup,
me1200QosIfCosToTagTableInfoGroup,
me1200QosIfPolicerTableInfoGroup,
me1200QosIfQueuePolicerTableInfoGroup,
me1200QosIfShaperTableInfoGroup,
me1200QosIfQueueShaperTableInfoGroup,
me1200QosIfSchedulerTableInfoGroup,
me1200QosStatusQceTableInfoGroup, me1200QosStatusIfTableInfoGroup,
me1200QosStatusIfSchedulerTableInfoGroup,
me1200QosControlGlobalsInfoGroup }
::= { me1200QosMIBCompliances 1 }
END
View Git Blame Copy Permalink