1816 lines
56 KiB
Plaintext
1816 lines
56 KiB
Plaintext
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- Copyright (c) 1995 Cisco Systems, Inc. --
|
|
-- All rights reserved. --
|
|
-- --
|
|
-- Reproduction of this document is authorized on condition that this --
|
|
-- copyright notice is included. This Cisco Systems' SNMP Management --
|
|
-- Information Base Specification (Specification) embodies Cisco --
|
|
-- Systems, Inc.'s (Cisco) proprietary intellectual property. --
|
|
-- Cisco retains all title and ownership in the Specification, including --
|
|
-- any revisions. --
|
|
-- --
|
|
-- It is Cisco's intent to encourage the widespread use of this --
|
|
-- Specification in connection with the management of Cisco products. --
|
|
-- Cisco grants vendors, end-users, and other interested parties a --
|
|
-- non-exclusive license to use this Specification in connection --
|
|
-- with the management of Cisco products. --
|
|
-- --
|
|
-- This Specification is supplied "AS IS," and Cisco makes no warranty, --
|
|
-- either expressed or implied, as to the use, operation, condition, --
|
|
-- or performance of the Specification. --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
|
|
|
|
-- This product line supports the full MIB-II, much of which applies to
|
|
-- the protocol layers supporting the switch's SNMP agent.
|
|
-- In addition, substantial private MIB extentions are required in order
|
|
-- to support full management of the switch's functionality. This file
|
|
-- lists the extentions which support the management of hot-swappable
|
|
-- modules.
|
|
|
|
-- These MIB extentions are written in accordance with RFC 1221,
|
|
-- "Concise MIB Definitions," an Internet memo defining a format
|
|
-- for producing MIB definition modules.
|
|
|
|
|
|
ES-MODULE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, Counter, TimeTicks
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString
|
|
FROM RFC1213-MIB;
|
|
|
|
-- Cisco Systems, Inc. Enterprise
|
|
|
|
grandjunction OBJECT IDENTIFIER ::= { enterprises 437 }
|
|
|
|
|
|
-- categories
|
|
|
|
products OBJECT IDENTIFIER ::= { grandjunction 1 }
|
|
|
|
|
|
-- product family
|
|
|
|
fastLink OBJECT IDENTIFIER ::= { products 1 }
|
|
|
|
|
|
-- groups
|
|
|
|
seriesG2xx OBJECT IDENTIFIER ::= { fastLink 2 }
|
|
|
|
-- the following group manages G2xx modules
|
|
|
|
esModuleBasic OBJECT IDENTIFIER ::= { seriesG2xx 1 }
|
|
esModuleSpecific OBJECT IDENTIFIER ::= { seriesG2xx 2 }
|
|
|
|
|
|
|
|
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- Module Basic --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
|
|
-- All objects below are in the esModuleBasic group. This group is used to
|
|
-- manage removeable modules. Any attempt to manage a different Cisco switch
|
|
-- using this group will result in noSuchName.
|
|
--
|
|
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- Module Basic Information --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
--
|
|
-- Configuration, status, and control objects for the overall unit.
|
|
--
|
|
--
|
|
|
|
esModuleBasicInfo OBJECT IDENTIFIER ::= { esModuleBasic 1 }
|
|
|
|
esModuleCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The esModuleCapacity is the number of expansion slots
|
|
that are available in the unit. "
|
|
|
|
::= { esModuleBasicInfo 1 }
|
|
|
|
|
|
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- Module Basic Table --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
|
|
esModuleInfo OBJECT IDENTIFIER ::= { esModuleBasic 2 }
|
|
|
|
esModuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EsModuleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of descriptive and status information about
|
|
the modules."
|
|
|
|
::= { esModuleInfo 1 }
|
|
|
|
esModuleEntry OBJECT-TYPE
|
|
SYNTAX EsModuleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information
|
|
about one of the modules."
|
|
INDEX { esModuleIndex }
|
|
::= { esModuleTable 1 }
|
|
|
|
EsModuleEntry ::=
|
|
SEQUENCE {
|
|
esModuleIndex
|
|
INTEGER,
|
|
esModuleStatus
|
|
INTEGER,
|
|
esModuleAdminStatus
|
|
INTEGER,
|
|
esModuleDescr
|
|
DisplayString,
|
|
esModuleID
|
|
DisplayString,
|
|
esModuleVersion
|
|
INTEGER,
|
|
esModuleObjectID
|
|
OBJECT IDENTIFIER,
|
|
esModulePortCapacity
|
|
INTEGER,
|
|
esModuleReset
|
|
INTEGER,
|
|
esModuleLastStatusChange
|
|
TimeTicks,
|
|
esModuleCollisionPeriods
|
|
Counter,
|
|
esModuleLinkDisplayMap
|
|
OCTET STRING,
|
|
esModuleDisabledDisplayMap
|
|
OCTET STRING,
|
|
esModuleBroadcastStormBlocked
|
|
INTEGER,
|
|
esModuleFirmwareVersion
|
|
DisplayString,
|
|
esModuleBOOTCodeVersion
|
|
DisplayString,
|
|
esModuleFlashStatus
|
|
DisplayString,
|
|
esModuleResetToFactoryDefaults
|
|
INTEGER,
|
|
esModuleSwPortIndex
|
|
INTEGER
|
|
}
|
|
|
|
esModuleIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the module for which
|
|
this entry contains information. This value
|
|
is never greater than esModuleCapacity."
|
|
|
|
::= { esModuleEntry 1 }
|
|
|
|
|
|
esModuleStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled-mgmt(2),
|
|
suspended-linkbeat(3),
|
|
suspended-jabber(4),
|
|
suspended-violation(5),
|
|
disabled-violation(7),
|
|
suspended-not-present(9),
|
|
suspended-not-recognized(10),
|
|
reset(11),
|
|
suspended-ringdown(12),
|
|
suspended-stp(13),
|
|
disabled-self-test(14),
|
|
enabled-degraded(15),
|
|
suspended-atm-lane-down(16),
|
|
suspended-no-vlan(17),
|
|
disabled-no-vlan(18),
|
|
suspended-atm-network-down(19),
|
|
suspended-disl(20)
|
|
}
|
|
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current operational status of the module. This value
|
|
is the same as swPortStatus for the corresponding
|
|
switched port. Possible values are:
|
|
enabled : normal operation (transmit and receive)
|
|
disabled-mgmt : disabled by explicit management action
|
|
suspended-linkbeat : suspended due to absence of linkbeat
|
|
suspended-jabber : suspended because port is jabbering
|
|
suspended-violation : suspended due to a secured address
|
|
violation
|
|
disabled-violation : disabled due to a secured address
|
|
violation
|
|
suspended-not-present: there is no module inserted in the
|
|
expansion slot.
|
|
suspended-not-recognized: there is an unrecognized module inserted
|
|
in the expansion slot.
|
|
reset : the module is currently in the reset state
|
|
suspended-ringdown : suspended due to a ring-down condition
|
|
suspended-stp : Spanning Tree Protocol non forwarding state
|
|
disabled-self-test : disabled because port fails self-test
|
|
suspended-atm-lane-down: Non-trunk ATM module using LANE suspended
|
|
because there is no active LANE client.
|
|
suspended-no-vlan : the module is not assigned to a VLAN or the
|
|
assigned VLAN does not exist.
|
|
disabled-no-vlan : vlan of the module is suspended or does not exist.
|
|
suspended-atm-network-down: ATM module suspended due to ATM network down,
|
|
or ATM physical layer down.
|
|
suspended-disl : suspended while module is negotiating trunking
|
|
mode using the Dynamic Inter Switch Link
|
|
protocol.
|
|
|
|
The default value is enabled(1), unless POST has detected
|
|
a failure on the module switch port, in which case, it is
|
|
disabled-mgmt(2). Any esModuleStatus of type disabled-xxxx (except
|
|
disabled-self-test) is saved across a system reset so a module
|
|
may also come up with such a status."
|
|
|
|
::= { esModuleEntry 2 }
|
|
|
|
esModuleAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"By explicit management action, change the port status
|
|
to either
|
|
enabled : normal status (transmit and receive)
|
|
disabled-mgmt: port is no longer in use.
|
|
This value is the same as swPortAdminStatus for the
|
|
corresponding switched port."
|
|
|
|
::= { esModuleEntry 3 }
|
|
|
|
esModuleDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A text string which includes the full name and
|
|
version identification of the module's hardware
|
|
type."
|
|
|
|
::= { esModuleEntry 4 }
|
|
|
|
esModuleID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..60))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A text representation of the Cisco specified
|
|
identifier for the installed module, or 'notPresent'."
|
|
|
|
::= { esModuleEntry 5 }
|
|
|
|
esModuleVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Cisco specified unique identification
|
|
for the module version, ranging from 1 to 254."
|
|
::= { esModuleEntry 6 }
|
|
|
|
esModuleObjectID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vendor's authoritative identification of the
|
|
module. This value may be allocated within the SMI
|
|
enterprises subtree (1.3.6.1.4.1) and provides a
|
|
straight-forward and unambiguous means for
|
|
determining what kind of group is being managed.
|
|
|
|
For example, this object could take the value
|
|
1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones,
|
|
Inc.' was assigned the subtree 1.3.6.1.4.1.4242,
|
|
and had assigned the identifier
|
|
1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone
|
|
4-Port Fast Ethernet Plug-in Module.'"
|
|
|
|
::= { esModuleEntry 7 }
|
|
|
|
esModulePortCapacity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of external port attachments provided by the
|
|
module."
|
|
::= { esModuleEntry 8 }
|
|
|
|
esModuleReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
noReset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to reset causes the module to be
|
|
forced into a reset state. The reset state is a module
|
|
specific condition in which the module's packet operations
|
|
will cease while the module resets to a known state."
|
|
::= { esModuleEntry 9 }
|
|
|
|
esModuleLastStatusChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the value of sysUpTime at the time that the value
|
|
of the esModuleStatus object for this module last changed.
|
|
A value of zero indicates that the group's operational
|
|
status has not changed since the agent last restarted."
|
|
::= { esModuleEntry 10 }
|
|
|
|
esModuleCollisionPeriods OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the count of times the firmware has toggled the
|
|
front panel module collision LED from the off state to the
|
|
on state. Successive reads of the counter may network
|
|
management software an indication of the rate of collision
|
|
activity, though an actual count of collisions is not
|
|
available."
|
|
::= { esModuleEntry 11 }
|
|
|
|
esModuleLinkDisplayMap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A bit array where the presence of a particular bit
|
|
indicates a lit link LED for a module port.
|
|
|
|
Each octet within the value of this object specifies a
|
|
set of eight link LEDs, with the first octet specifying
|
|
link LEDs for ports 1 through 8, the second octet
|
|
specifying link LEDs 9 through 16, etc. Within each
|
|
octet, the most significant bit represents the lowest
|
|
numbered LED, and the least significant bit represents the
|
|
highest numbered LED. Thus, each LED is represented by a
|
|
single bit within the value of this object. If that bit
|
|
has a value of '1' then that LED is currently lit;
|
|
the LED is not lit if its bit has a value of '0'."
|
|
|
|
::= { esModuleEntry 12 }
|
|
|
|
esModuleDisabledDisplayMap OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A bit array where the presence of a particular bit
|
|
indicates a lit disabled LED for a module port.
|
|
|
|
Each octet within the value of this object specifies a
|
|
set of eight disabled LEDs, with the first octet specifying
|
|
disabled LEDs for ports 1 through 8, the second octet
|
|
specifying disabled LEDs 9 through 16, etc. Within each
|
|
octet, the most significant bit represents the lowest
|
|
numbered LED, and the least significant bit represents the
|
|
highest numbered LED. Thus, each LED is represented by a
|
|
single bit within the value of this object. If that bit
|
|
has a value of '1' then that LED is currently lit;
|
|
the LED is not lit if its bit has a value of '0'."
|
|
|
|
::= { esModuleEntry 13 }
|
|
|
|
|
|
esModuleBroadcastStormBlocked OBJECT-TYPE
|
|
SYNTAX INTEGER { notBlocked(1), blocked(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current broadcast forwarding status of this module.
|
|
If this module is blocked by broadcast storm control, the
|
|
switch drops all broadcasts received from the module.
|
|
If the module is a multi-port repeater, broadcast
|
|
received from a repeater port is forwarded to all
|
|
the other repeater ports in the same module.
|
|
The broadcast is not forwarded other switched ports."
|
|
|
|
::= { esModuleEntry 14 }
|
|
|
|
esModuleFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object returns the version number of the
|
|
firmware stored in FLASH memory on the
|
|
module. The string has the
|
|
format 'v1.00' for the FDDI module.
|
|
For the ATM module, the string is longer."
|
|
::= { esModuleEntry 15 }
|
|
|
|
esModuleBOOTCodeVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object returns the version number of the
|
|
BOOT code stored in permanent FLASH memory on
|
|
the module. The string has the
|
|
format 'v1.00' for the FDDI module.
|
|
For the ATM module, the string is longer."
|
|
::= { esModuleEntry 16 }
|
|
|
|
esModuleFlashStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string of up to 80 characters indicating the
|
|
status of the firmware stored in the module's
|
|
FLASH memory. The string includes the firmware
|
|
revision, the data and time of the last upgrade,
|
|
the source of the upgrade, as well as the validity
|
|
of the firmware. The string is in net ASCII and
|
|
conforms to one of the following formats:
|
|
For the FDDI module:
|
|
|
|
For factory installed firmware:
|
|
|
|
' v1.00 factory installed: valid'
|
|
|
|
For out-of-band upgrades:
|
|
|
|
' v1.00 written 07-22-1994 08:19:15 from serial terminal: valid'
|
|
|
|
For in-band upgrades:
|
|
|
|
' v1.00 written 07-22-1994 12:19:15 from 192.009.200.200: invalid'
|
|
|
|
For the ATM module, the formats are similar, but the part of the
|
|
string containing the version number is longer."
|
|
|
|
::= { esModuleEntry 17 }
|
|
|
|
esModuleResetToFactoryDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noReset(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to reset(2) will cause the
|
|
settings on the module to revert to factory
|
|
defaults. The module will then be reset by the
|
|
system. The module's packet operations will
|
|
cease while the module resets to a known state. A read
|
|
of this object will always return the value noReset(1).
|
|
Setting this object to noReset(1) has no effect."
|
|
|
|
::= { esModuleEntry 18 }
|
|
|
|
esModuleSwPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the value of swPortIndex object in the
|
|
STANDALONE-ETHERNET-SWITCH-MIB corresponding
|
|
to the module."
|
|
::= { esModuleEntry 19 }
|
|
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- Module Port Table --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
|
|
esModulePortInfo OBJECT IDENTIFIER ::= { esModuleBasic 3 }
|
|
|
|
esModulePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EsModulePortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of descriptive and status information about
|
|
the individual ports in a module."
|
|
|
|
::= { esModulePortInfo 1 }
|
|
|
|
esModulePortEntry OBJECT-TYPE
|
|
SYNTAX EsModulePortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information
|
|
about one of the repeater ports."
|
|
INDEX { esModuleSlotIndex, esModulePortIndex }
|
|
::= { esModulePortTable 1 }
|
|
|
|
EsModulePortEntry ::=
|
|
SEQUENCE {
|
|
esModuleSlotIndex
|
|
INTEGER,
|
|
esModulePortIndex
|
|
INTEGER,
|
|
esModulePortDescr
|
|
DisplayString,
|
|
esModulePortAdminStatus
|
|
INTEGER,
|
|
esModulePortAutoPartitionState
|
|
INTEGER,
|
|
esModulePortOperStatus
|
|
INTEGER,
|
|
esModulePortLinkbeatStatus
|
|
INTEGER,
|
|
esModulePortConnectorType
|
|
INTEGER,
|
|
esModulePortReceivePeriods
|
|
Counter
|
|
}
|
|
|
|
esModuleSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the value of esModuleIndex object of the module
|
|
which this port belongs to. This value is never greater
|
|
than esModuleCapacity."
|
|
|
|
::= { esModulePortEntry 1 }
|
|
|
|
|
|
esModulePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the port for which
|
|
this entry contains information. This value
|
|
is never greater than esModulePortCapacity."
|
|
|
|
::= { esModulePortEntry 2 }
|
|
|
|
esModulePortDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..60))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A descriptive string of up to 60 characters used by the
|
|
network administrator to name the port."
|
|
|
|
::= { esModulePortEntry 3 }
|
|
|
|
|
|
esModulePortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"By explicit management action, change the port status
|
|
to either
|
|
enabled : normal status (transmit and receive)
|
|
disabled : the port neither transmits nor receives.
|
|
Once disabled, a port must be explicitly
|
|
enabled to restore operation."
|
|
::= { esModulePortEntry 4 }
|
|
|
|
|
|
esModulePortAutoPartitionState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notAutoPartitioned(1),
|
|
autoPartitioned(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the port is currently partitioned by
|
|
the repeater's auto-partition protection."
|
|
::= { esModulePortEntry 5 }
|
|
|
|
|
|
esModulePortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
suspended-not-present(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the port's operational status.
|
|
enabled : port is enabled and working
|
|
notOperational : the port neither transmits nor receives
|
|
suspended-not-present: the module group is not installed."
|
|
::= { esModulePortEntry 6 }
|
|
|
|
|
|
|
|
esModulePortLinkbeatStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
linkbeat(1),
|
|
noLinkbeat(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's current linkbeat status."
|
|
::= { esModulePortEntry 7 }
|
|
|
|
|
|
esModulePortConnectorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
rj45(2),
|
|
bnc(3),
|
|
aui(4),
|
|
fiber-sc(5),
|
|
fiber-st(6),
|
|
empty(7),
|
|
fddi-mic(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The connector type for the port.
|
|
It is one of
|
|
|
|
other : none of the following (unknown)
|
|
rj45 : common unshielded twisted pair connector
|
|
bnc : thin-coax (BNC)
|
|
aui : thick-coax (AUI)
|
|
fiber-sc : fiber fast ethernet connector
|
|
fiber-st : fiber fast ethernet connector
|
|
empty : the port is not installed
|
|
fddi-mic : FDDI fiber optic connector."
|
|
|
|
::= { esModulePortEntry 8 }
|
|
|
|
|
|
esModulePortReceivePeriods OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the count of times the front panel port receive
|
|
activity LED has been toggled from the off state to the on
|
|
state. Successive reads of this counter give network
|
|
management software an indication of receive activity for
|
|
each individual port, though an actual count of receives
|
|
per port is not available."
|
|
::= { esModulePortEntry 9 }
|
|
|
|
|
|
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- Module Specific --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
|
|
-- All objects below are in the esModuleSpecific group. This group is used to
|
|
-- to manage removeable modules. Any attempt to manage a different Cisco switch
|
|
-- using this group will result in noSuchName.
|
|
--
|
|
|
|
fmFDDIBasic OBJECT IDENTIFIER ::= { esModuleSpecific 1 }
|
|
|
|
fmFDDICfgInfo OBJECT IDENTIFIER ::= { fmFDDIBasic 1 }
|
|
|
|
fmCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmCfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of configuration and status information about
|
|
FDDI modules."
|
|
|
|
::= { fmFDDICfgInfo 1}
|
|
|
|
fmCfgEntry OBJECT-TYPE
|
|
SYNTAX FmCfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information
|
|
about one a FDDI module."
|
|
INDEX { fmCfgIndex }
|
|
::= { fmCfgTable 1 }
|
|
|
|
FmCfgEntry ::=
|
|
SEQUENCE {
|
|
fmCfgIndex
|
|
INTEGER,
|
|
fmCfgFirmwareVersion
|
|
DisplayString,
|
|
fmCfgBOOTCodeVersion
|
|
DisplayString,
|
|
fmCfgPOSTResult
|
|
INTEGER,
|
|
fmCfgPOSTTest
|
|
INTEGER,
|
|
fmCfgPOSTLoopbackResult
|
|
INTEGER,
|
|
fmCfgFlashStatus
|
|
DisplayString,
|
|
fmCfgResetToFactoryDefaults
|
|
INTEGER,
|
|
fmCfgResetModule
|
|
INTEGER,
|
|
fmCfgNovellFDDISNAPTranslation
|
|
INTEGER,
|
|
fmCfgUnmatchedSNAPDestination
|
|
INTEGER,
|
|
fmCfgAuthorizationChecking
|
|
INTEGER,
|
|
fmCfgAuthorizationString
|
|
DisplayString
|
|
}
|
|
|
|
fmCfgIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the module for which
|
|
this entry contains information. This value
|
|
is never greater than esModuleCapacity."
|
|
|
|
::= { fmCfgEntry 1 }
|
|
|
|
fmCfgFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object returns the version number of the
|
|
firmware stored in FLASH memory on the
|
|
FDDI module. The string has the
|
|
format 'v1.00'."
|
|
|
|
::= { fmCfgEntry 2 }
|
|
|
|
fmCfgBOOTCodeVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object returns the version number of the
|
|
BOOT code stored in permanent FLASH memory on
|
|
the FDDI module. The string has the
|
|
format 'v1.00'."
|
|
|
|
::= { fmCfgEntry 3 }
|
|
|
|
fmCfgPOSTResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noFailure(1),
|
|
prom(2),
|
|
cpu(3),
|
|
flash(4),
|
|
dram(5),
|
|
arbiter(6),
|
|
shared-ram(7),
|
|
ethernet(8),
|
|
fddi-mac(9),
|
|
fddi-phy-a(10),
|
|
fddi-phy-b(11),
|
|
packet-ram(12)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the result of the FDDI
|
|
module's Power On Self Test (POST). If the module
|
|
passed POST, this item will return noFailure(1)."
|
|
::= { fmCfgEntry 4 }
|
|
|
|
fmCfgPOSTTest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noFailure(1),
|
|
invalid-marker(2),
|
|
checksum(3),
|
|
ram-quick-scan(4),
|
|
ram-byte-test(5),
|
|
checkerboard(6),
|
|
arbiter-id(7),
|
|
read-only-register(8),
|
|
read-write-register(9),
|
|
ethernet-interrupt(10),
|
|
loopback(11),
|
|
invalid-version(12)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the specific test that caused
|
|
the POST to fail. If the module passed POST, this
|
|
item will return noFailure(1)."
|
|
|
|
::= { fmCfgEntry 5 }
|
|
|
|
fmCfgPOSTLoopbackResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noFailure(1),
|
|
cannot-transmit(2),
|
|
receive-timeout(3),
|
|
data-mismatch(4),
|
|
length-mismatch(5),
|
|
receiver-error(6),
|
|
buffer-error(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"In the event that the FDDI module fails the loopback
|
|
test during POST, this object will indicate which
|
|
portion of the test caused the failure. If the value
|
|
of fmCfgPOSTTest is anything other than loopback(11),
|
|
this object will have the value noFailure(1)."
|
|
|
|
::= { fmCfgEntry 6 }
|
|
|
|
fmCfgFlashStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A string of up to 80 characters indicating the
|
|
status of the firmware stored in the FDDI module's
|
|
FLASH memory. The string includes the firmware
|
|
revision, the data and time of the last upgrade,
|
|
the source of the upgrade, as well as the validity
|
|
of the firmware. The string is in net ASCII and
|
|
conforms to one of the following formats:
|
|
|
|
For factory installed firmware:
|
|
|
|
' v1.00 factory installed: valid'
|
|
|
|
For out-of-band upgrades:
|
|
|
|
' v1.00 written 07-22-1994 08:19:15 from serial terminal: valid'
|
|
|
|
For in-band upgrades:
|
|
|
|
' v1.00 written 07-22-1994 12:19:15 from 192.009.200.200: invalid'"
|
|
|
|
::= { fmCfgEntry 7 }
|
|
|
|
fmCfgResetToFactoryDefaults OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noReset(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to reset(2) will cause the
|
|
settings on the FDDI module to revert to factory
|
|
defaults. The module will then be reset by the
|
|
system. The module's packet operations will
|
|
cease while the module resets to a known state.A read
|
|
of this object will always return the value noReset(1).
|
|
Setting this object to noReset(1) has no effect."
|
|
|
|
::= { fmCfgEntry 8 }
|
|
|
|
fmCfgResetModule OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noReset(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to reset(2) causes the module to be
|
|
forced into a reset state. During the reset state, the
|
|
module's packet operations will cease while the module
|
|
resets to a known state."
|
|
::= { fmCfgEntry 9 }
|
|
|
|
fmCfgNovellFDDISNAPTranslation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
ethernet-8023(2),
|
|
ethernet-SNAP(3),
|
|
ethernet-II(4),
|
|
drop(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the Ethernet frame type that
|
|
the FDDI module will translate Novell SNAP FDDI frames into.
|
|
|
|
automatic(1): the FDDI module will automatically
|
|
learn which frame type to use
|
|
ethernet-8023(2): the FDDI module will convert
|
|
Novell SNAP FDDI frames to Ethernet 802.3
|
|
ethernet-SNAP(3): the FDDI module will convert
|
|
Novell SNAP FDDI frames to Ethernet SNAP
|
|
ethernet-II(4): the FDDI module will convert
|
|
Novell SNAP FDDI frames to Ethernet II
|
|
drop(5): the FDDI module will not forward
|
|
Novell SNAP FDDI frames to Ethernet."
|
|
::= { fmCfgEntry 10}
|
|
|
|
fmCfgUnmatchedSNAPDestination OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all(1),
|
|
ethernet-8023(2),
|
|
ethernet-SNAP(3),
|
|
ethernet-II(4),
|
|
drop(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies what the FDDI module is to do with
|
|
Novell SNAP FDDI frames whose destination frame type cannot
|
|
be determined. The value of this object is only valid when
|
|
fmCfgNovellFDDISNAPTranslation is set to automatic(1).
|
|
|
|
all(1): the unmatched Novell SNAP FDDI frames
|
|
will be converted into all three
|
|
possible frame types.
|
|
ethernet-8023(2): the unmatched Novell SNAP FDDI frames
|
|
will be converted into Ethernet 802.3
|
|
ethernet-SNAP(3): the unmatched Novell SNAP FDDI frames
|
|
will be converted into Ethernet SNAP
|
|
ethernet-II(4): the unmatched Novell SNAP FDDI frames
|
|
will be converted into Ethernet II
|
|
drop: the FDDI module will not forward
|
|
unmatched Novell SNAP FDDI frames to
|
|
Ethernet."
|
|
::= { fmCfgEntry 11 }
|
|
|
|
fmCfgAuthorizationChecking OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object controls enabling and disabling of authorization
|
|
string checking by the SMT entity. When enabled, the FDDI
|
|
module will use the current authorization string to verify SMT
|
|
requests from remote stations. This item is disabled by default."
|
|
|
|
::= { fmCfgEntry 12 }
|
|
|
|
fmCfgAuthorizationString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This item specifies the string to be used in the authentication
|
|
of SMT requests. The length is from 0 to 32 bytes and must be
|
|
a multiple of 4 bytes. This item is only used when authorization
|
|
string checking is enabled."
|
|
|
|
::= { fmCfgEntry 13 }
|
|
|
|
|
|
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- FDDI Translation to Ethernet Table --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
|
|
fmFDDIXlateToEthInfo OBJECT IDENTIFIER ::= { fmFDDIBasic 2 }
|
|
|
|
fmXlateToEthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmXlateToEthEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of statistics that count the number of
|
|
frames successfully forwarded from the FDDI
|
|
module to the switch forwarding engine."
|
|
|
|
::= { fmFDDIXlateToEthInfo 1}
|
|
|
|
fmXlateToEthEntry OBJECT-TYPE
|
|
SYNTAX FmXlateToEthEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information
|
|
about a FDDI module."
|
|
INDEX { fmXlateToEthIndex }
|
|
::= { fmXlateToEthTable 1 }
|
|
|
|
FmXlateToEthEntry ::=
|
|
SEQUENCE {
|
|
fmXlateToEthIndex
|
|
INTEGER,
|
|
fmXlateToEthNovellSnapToRaw8023Frames
|
|
Counter,
|
|
fmXlateToEthNovellSnapToEthIIFrames
|
|
Counter,
|
|
fmXlateToEthNovellSnapToSnapFrames
|
|
Counter,
|
|
fmXlateToEthAppleTalkSnapToSnapFrames
|
|
Counter,
|
|
fmXlateToEthIpSnapForFragmentationFrames
|
|
Counter,
|
|
fmXlateToEthIpSnapFragmentedFrames
|
|
Counter,
|
|
fmXlateToEthBridgeTunnelToEthIIFrames
|
|
Counter,
|
|
fmXlateToEthOtherSnapToEthIIFrames
|
|
Counter,
|
|
fmXlateToEthOtherSnapToSnapFrames
|
|
Counter,
|
|
fmXlateToEth8022To8022Frames
|
|
Counter
|
|
}
|
|
|
|
fmXlateToEthIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the module for which
|
|
this entry contains information. This value
|
|
is never greater than esModuleCapacity."
|
|
|
|
::= { fmXlateToEthEntry 1 }
|
|
|
|
fmXlateToEthNovellSnapToRaw8023Frames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Novell SNAP
|
|
FDDI frames that have been converted to Raw 802.3
|
|
Ethernet frames."
|
|
|
|
::= { fmXlateToEthEntry 2 }
|
|
|
|
fmXlateToEthNovellSnapToEthIIFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Novell SNAP
|
|
FDDI frames that have been converted to Ethernet II
|
|
frames."
|
|
|
|
::= { fmXlateToEthEntry 3 }
|
|
|
|
fmXlateToEthNovellSnapToSnapFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Novell SNAP
|
|
FDDI frames that have been converted to Novell SNAP
|
|
Ethernet frames."
|
|
|
|
::= { fmXlateToEthEntry 4 }
|
|
|
|
fmXlateToEthAppleTalkSnapToSnapFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of AppleTalk SNAP
|
|
FDDI frames that have been converted to Novell SNAP
|
|
Ethernet frames."
|
|
|
|
::= { fmXlateToEthEntry 5 }
|
|
|
|
fmXlateToEthIpSnapForFragmentationFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of IP FDDI frames
|
|
that were fragmented."
|
|
|
|
::= { fmXlateToEthEntry 6 }
|
|
|
|
fmXlateToEthIpSnapFragmentedFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Ethernet frames
|
|
that were forwarded to the switch forwarding engine as
|
|
a result of IP fragmentation."
|
|
|
|
::= { fmXlateToEthEntry 7 }
|
|
|
|
fmXlateToEthBridgeTunnelToEthIIFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Bridge Tunnel
|
|
FDDI frames that have been converted to Ethernet II
|
|
frames."
|
|
|
|
::= { fmXlateToEthEntry 8 }
|
|
|
|
fmXlateToEthOtherSnapToEthIIFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of SNAP FDDI frames that
|
|
do not fall into one of the previous SNAP FDDI categories
|
|
that have been converted to Ethernet II frames."
|
|
|
|
::= { fmXlateToEthEntry 9 }
|
|
|
|
fmXlateToEthOtherSnapToSnapFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of SNAP FDDI frames that
|
|
do not fall into one of the previous SNAP FDDI categories
|
|
that have been converted to Ethernet SNAP frames."
|
|
|
|
::= { fmXlateToEthEntry 10 }
|
|
|
|
fmXlateToEth8022To8022Frames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of 802.2 FDDI frames
|
|
that have been converted to Ethernet 802.2 frames."
|
|
|
|
::= { fmXlateToEthEntry 11 }
|
|
|
|
|
|
|
|
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- FDDI Translation to FDDI Table --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
|
|
|
|
fmFDDIXlateToFDDIInfo OBJECT IDENTIFIER ::= { fmFDDIBasic 3 }
|
|
|
|
fmXlateToFDDITable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmXlateToFDDIEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of statistics that count the number of
|
|
frames successfully forwarded from the switch
|
|
forwarding engine to the FDDI ring."
|
|
|
|
::= { fmFDDIXlateToFDDIInfo 1}
|
|
|
|
fmXlateToFDDIEntry OBJECT-TYPE
|
|
SYNTAX FmXlateToFDDIEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information
|
|
about a FDDI module."
|
|
INDEX { fmXlateToFDDIIndex }
|
|
::= { fmXlateToFDDITable 1 }
|
|
|
|
FmXlateToFDDIEntry ::=
|
|
SEQUENCE {
|
|
fmXlateToFDDIIndex
|
|
INTEGER,
|
|
fmXlateToFDDINovellRaw8023ToSnapFrames
|
|
Counter,
|
|
fmXlateToFDDINovellEthIIToSnapFrames
|
|
Counter,
|
|
fmXlateToFDDINovellSnapToSnapFrames
|
|
Counter,
|
|
fmXlateToFDDIEthIIToBridgeTunnelFrames
|
|
Counter,
|
|
fmXlateToFDDIEthIIToSnapFrames
|
|
Counter,
|
|
fmXlateToFDDIOtherSnapToSnapFrames
|
|
Counter,
|
|
fmXlateToFDDI8022To8022Frames
|
|
Counter
|
|
}
|
|
|
|
fmXlateToFDDIIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the module for which
|
|
this entry contains information. This value
|
|
is never greater than esModuleCapacity."
|
|
|
|
::= { fmXlateToFDDIEntry 1 }
|
|
|
|
fmXlateToFDDINovellRaw8023ToSnapFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Novell Raw 802.3
|
|
Ethernet frames that have been converted to SNAP FDDI
|
|
frames."
|
|
::= { fmXlateToFDDIEntry 2 }
|
|
|
|
fmXlateToFDDINovellEthIIToSnapFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Ethernet II
|
|
frames that have been converted to SNAP FDDI frames."
|
|
::= { fmXlateToFDDIEntry 3 }
|
|
|
|
fmXlateToFDDINovellSnapToSnapFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Novell SNAP Ethernet
|
|
frames that have been converted to SNAP FDDI frames."
|
|
::= { fmXlateToFDDIEntry 4 }
|
|
|
|
fmXlateToFDDIEthIIToBridgeTunnelFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Ethernet II frames
|
|
that have been converted to Bridge Tunnel FDDI frames."
|
|
::= { fmXlateToFDDIEntry 5 }
|
|
|
|
fmXlateToFDDIEthIIToSnapFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Ethernet II
|
|
frames that have been converted to SNAP FDDI frames."
|
|
::= { fmXlateToFDDIEntry 6 }
|
|
|
|
fmXlateToFDDIOtherSnapToSnapFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of SNAP frames that
|
|
do not fall into one of the above listed SNAP type categories
|
|
that have been translated to Ethernet II."
|
|
::= { fmXlateToFDDIEntry 7 }
|
|
|
|
fmXlateToFDDI8022To8022Frames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI 802.2
|
|
frames that have been converted to Ethernet 802.2 frames."
|
|
::= { fmXlateToFDDIEntry 8 }
|
|
|
|
|
|
|
|
-- ------------------------------------------------------------------------
|
|
-- --
|
|
-- FDDI Filter Table --
|
|
-- --
|
|
-- ------------------------------------------------------------------------
|
|
|
|
|
|
fmFDDIFilterInfo OBJECT IDENTIFIER ::= { fmFDDIBasic 4 }
|
|
|
|
fmFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of statistics that count the number of
|
|
frames that were not forwarded by the FDDI module."
|
|
|
|
::= { fmFDDIFilterInfo 1}
|
|
|
|
fmFilterEntry OBJECT-TYPE
|
|
SYNTAX FmFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information
|
|
about a FDDI module."
|
|
INDEX { fmFilterIndex }
|
|
::= { fmFilterTable 1 }
|
|
|
|
FmFilterEntry ::=
|
|
SEQUENCE {
|
|
fmFilterIndex
|
|
INTEGER,
|
|
fmFilterFcsInvalidFrames
|
|
Counter,
|
|
fmFilterDataLengthFrames
|
|
Counter,
|
|
fmFilterErrorIndFrames
|
|
Counter,
|
|
fmFilterFddiFifoOverrunFrames
|
|
Counter,
|
|
fmFilterFddiInternalErrorFrames
|
|
Counter,
|
|
fmFilterNoBufferSpaceFrames
|
|
Counter,
|
|
fmFilterNoEndDelimitFrames
|
|
Counter,
|
|
fmFilterNoLlcHeaderFrames
|
|
Counter,
|
|
fmFilterSourceRouteFrames
|
|
Counter,
|
|
fmFilterNoSnapHeaderFrames
|
|
Counter,
|
|
fmFilterTooLargeFrames
|
|
Counter,
|
|
fmFilterNovellSnapFilteredFrames
|
|
Counter,
|
|
fmFilterCantFragmentFrames
|
|
Counter,
|
|
fmFilterBadIpHeaderFrames
|
|
Counter,
|
|
fmFilterRingDownDiscards
|
|
Counter,
|
|
fmFilterNovellOtherFilteredFrames
|
|
Counter
|
|
}
|
|
|
|
fmFilterIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the module for which
|
|
this entry contains information. This value
|
|
is never greater than esModuleCapacity."
|
|
::= { fmFilterEntry 1 }
|
|
|
|
fmFilterFcsInvalidFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the frame contained
|
|
an invalid FCS."
|
|
::= { fmFilterEntry 2 }
|
|
|
|
fmFilterDataLengthFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the frame contained
|
|
an invalid data length."
|
|
::= { fmFilterEntry 3 }
|
|
|
|
fmFilterErrorIndFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the frame's error
|
|
indication flag was set."
|
|
::= { fmFilterEntry 4 }
|
|
|
|
fmFilterFddiFifoOverrunFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the FDDI FIFO experienced
|
|
an overflow."
|
|
::= { fmFilterEntry 5 }
|
|
|
|
fmFilterFddiInternalErrorFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the module experienced
|
|
an internal error."
|
|
::= { fmFilterEntry 6 }
|
|
|
|
fmFilterNoBufferSpaceFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the module did not
|
|
have sufficient buffer space."
|
|
::= { fmFilterEntry 7 }
|
|
|
|
fmFilterNoEndDelimitFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the frame did not
|
|
have a valid end delimiter."
|
|
::= { fmFilterEntry 8 }
|
|
|
|
fmFilterNoLlcHeaderFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the frame did not
|
|
have a valid LLC header."
|
|
::= { fmFilterEntry 9 }
|
|
|
|
fmFilterSourceRouteFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The FDDI module does not forward source routing frames.
|
|
This object is a count of the number of such frames
|
|
that were filtered."
|
|
::= { fmFilterEntry 10 }
|
|
|
|
fmFilterNoSnapHeaderFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the frame did not have
|
|
a valid SNAP header."
|
|
::= { fmFilterEntry 11 }
|
|
|
|
fmFilterTooLargeFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the frame was too large."
|
|
::= { fmFilterEntry 12 }
|
|
|
|
fmFilterNovellSnapFilteredFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of Novell SNAP
|
|
FDDI frames that were filtered by the module."
|
|
::= { fmFilterEntry 13 }
|
|
|
|
fmFilterCantFragmentFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI IP frames
|
|
that were not forwarded because the module was unable
|
|
to fragment the frame."
|
|
::= { fmFilterEntry 14 }
|
|
|
|
fmFilterBadIpHeaderFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the frame contained
|
|
an invalid IP header."
|
|
::= { fmFilterEntry 15 }
|
|
|
|
fmFilterRingDownDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a count of the number of FDDI frames
|
|
that were not forwarded because the FDDI ring was
|
|
not operational."
|
|
::= { fmFilterEntry 16 }
|
|
|
|
fmFilterNovellOtherFilteredFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is the sum of the Novell Ethernet frames that
|
|
were not forwarded because they contained an invalid size field
|
|
and the number of Novell Ethernet frames that were not
|
|
forwarded because the FDDI module was configured to filter
|
|
Novell SNAP FDDI frames."
|
|
::= { fmFilterEntry 17 }
|
|
|
|
-- ------------------------------------------
|
|
--
|
|
-- The following objects are module-specific
|
|
-- objects for the ATM module.
|
|
--
|
|
-- ------------------------------------------
|
|
|
|
fmAtmBasic OBJECT IDENTIFIER ::= { esModuleSpecific 2 }
|
|
|
|
fmAtmCfgInfo OBJECT IDENTIFIER ::= { fmAtmBasic 1 }
|
|
|
|
fmAtmCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmAtmCfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of configuration and status information about
|
|
ATM modules."
|
|
::= { fmAtmCfgInfo 1}
|
|
|
|
fmAtmCfgEntry OBJECT-TYPE
|
|
SYNTAX FmAtmCfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information
|
|
about one ATM module."
|
|
INDEX { fmAtmCfgIndex }
|
|
::= { fmAtmCfgTable 1 }
|
|
|
|
FmAtmCfgEntry ::=
|
|
SEQUENCE {
|
|
fmAtmCfgIndex
|
|
INTEGER,
|
|
fmAtmCfgPOSTResult
|
|
INTEGER,
|
|
fmAtmCfgPOSTTest
|
|
INTEGER,
|
|
fmAtmCfgPOSTLoopbackResult
|
|
INTEGER,
|
|
fmAtmCfgFramingMode
|
|
INTEGER
|
|
}
|
|
|
|
fmAtmCfgIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the module for which
|
|
this entry contains information. This value
|
|
is never greater than esModuleCapacity."
|
|
::= { fmAtmCfgEntry 1 }
|
|
|
|
fmAtmCfgPOSTResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- other than the following
|
|
unknown(2),
|
|
no-failure(3),
|
|
fpga(4),
|
|
shared-memory(5),
|
|
host-interface(6),
|
|
ethernet-controller(7),
|
|
sar-controller(8),
|
|
sar-memory(9),
|
|
framer(10),
|
|
traffic-co-processor(11),
|
|
traffic-co-processor-memory(12),
|
|
flash(13)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the result of the ATM
|
|
module's Power On Self Test (POST), that is, which
|
|
module component, if any, failed POST. If the module
|
|
passed POST, this item will return no-failure(2)."
|
|
::= { fmAtmCfgEntry 2 }
|
|
|
|
fmAtmCfgPOSTTest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- other than the following
|
|
unknown(2),
|
|
no-failure(3),
|
|
refresh(4),
|
|
quick-scan-word(5),
|
|
quick-scan-byte(6),
|
|
byte-pattern(7),
|
|
checkerboard(8),
|
|
no-response(9),
|
|
data-mismatch(10),
|
|
interrupt(11),
|
|
control-memory(12),
|
|
checksum(13),
|
|
read-only-configuration-register(14),
|
|
read-write-configuration-register(15),
|
|
read-only-register(16),
|
|
read-write-register(17),
|
|
local-loopback(18),
|
|
host-loopback(19),
|
|
module-to-host-interrupt(20),
|
|
host-to-module-interrupt(21)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the specific test that caused the
|
|
POST to fail. If the ATM module passed POST, this
|
|
item will return no-failure(2)."
|
|
::= { fmAtmCfgEntry 3 }
|
|
|
|
fmAtmCfgPOSTLoopbackResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- other than the following
|
|
unknown(2),
|
|
no-failure(3),
|
|
cannot-transmit(4),
|
|
receive-timeout(5),
|
|
data-mismatch(6),
|
|
length-mismatch(7),
|
|
receiver-error(8),
|
|
buffer-error(9)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"In the event that the ATM module fails a loopback
|
|
test during POST, this object will indicate which
|
|
portion of the test caused the failure. If the value
|
|
of fmAtmCfgPOSTTest is anything other than
|
|
local-loopback(17) or host-loopback(18)
|
|
this object will have the value no-failure(2)."
|
|
::= { fmAtmCfgEntry 4 }
|
|
|
|
fmAtmCfgFramingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sts-3c(1),
|
|
stm-1(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The mode of operation for the SONET PLIM.
|
|
The default value is sts-3c(1)."
|
|
::= { fmAtmCfgEntry 5 }
|
|
|
|
fmAtmStatsInfo OBJECT IDENTIFIER ::= { fmAtmBasic 2 }
|
|
|
|
fmAtmRxStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FmAtmRxStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of receive statistics on ATM modules."
|
|
::= { fmAtmStatsInfo 1}
|
|
|
|
fmAtmRxStatEntry OBJECT-TYPE
|
|
SYNTAX FmAtmRxStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing receive statistics
|
|
about one ATM module."
|
|
INDEX { fmAtmRxStatIndex }
|
|
::= { fmAtmRxStatTable 1 }
|
|
|
|
FmAtmRxStatEntry ::=
|
|
SEQUENCE {
|
|
fmAtmRxStatIndex
|
|
INTEGER,
|
|
fmAtmRxControlFrames
|
|
Counter,
|
|
fmAtmRxLocalLecFrames
|
|
Counter,
|
|
fmAtmRxNoBufferDiscards
|
|
Counter,
|
|
fmAtmRxCRCErrors
|
|
Counter,
|
|
fmAtmRxFrameTooLongs
|
|
Counter,
|
|
fmAtmRxOtherDiscards
|
|
Counter,
|
|
fmAtmRxHecCellErrors
|
|
Counter
|
|
}
|
|
|
|
fmAtmRxStatIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the module for which
|
|
this entry contains information. This value
|
|
is never greater than esModuleCapacity."
|
|
::= { fmAtmRxStatEntry 1 }
|
|
|
|
fmAtmRxControlFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of number of AAL5 control frames received by
|
|
the module."
|
|
::= { fmAtmRxStatEntry 2 }
|
|
|
|
fmAtmRxLocalLecFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of AAL5 frames received with LEC ids
|
|
matching the module's LEC id. These frames
|
|
are discarded."
|
|
::= { fmAtmRxStatEntry 3 }
|
|
|
|
fmAtmRxNoBufferDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of AAL5 frames received that were discarded due
|
|
to a lack of frame buffer resources in the module's
|
|
forwarding engine."
|
|
::= { fmAtmRxStatEntry 4 }
|
|
|
|
fmAtmRxCRCErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of AAL5 frames received that were discarded due
|
|
to CRC errors."
|
|
::= { fmAtmRxStatEntry 5 }
|
|
|
|
fmAtmRxFrameTooLongs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of AAL5 frames received that exceed the maximum
|
|
permitted frame size as defined by ifMtu object the port."
|
|
::= { fmAtmRxStatEntry 6 }
|
|
|
|
fmAtmRxOtherDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of AAL5 frames received that were discarded due
|
|
to reasons other than a lack of frame buffer resources in the
|
|
module's forwarding engine, errors, frames exceeding maximum
|
|
frame size, or frames with LEC id matching the module's LEC id."
|
|
::= { fmAtmRxStatEntry 7 }
|
|
|
|
fmAtmRxHecCellErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of ATM cells received with errors in HEC header."
|
|
::= { fmAtmRxStatEntry 8 }
|
|
|
|
END
|