Observium_CE/mibs/cisco/CISCO-VDC-MIB

1423 lines
45 KiB
Plaintext

-- *****************************************************************
-- CISCO-VDC-MIB.my
-- Virtual Device Control MIB
-- April 2010, Matthew Anger
--
-- Copyright (c) 2010-2016 by cisco Systems Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-VDC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32,
Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress,
RowStatus,
StorageType,
DateAndTime,
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InterfaceIndex
FROM IF-MIB
Cisco2KVlanList
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoVdcMIB MODULE-IDENTITY
LAST-UPDATED "201611030000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-nexus7000@cisco.com"
DESCRIPTION
"This MIB module defines the objects that describes virtual
devices. VDCs are a feature of Nexus series switches from Cisco
Systems that allow users to create virtual switches and
partition the physical hardware across said virtual switches.
This is commonly used to provide management separation without
the extra overhead of additional physical hardware.
Glossary of the terms used in this MIB:
VDC - Virtual Device Context
HA - High Availability"
REVISION "201611030000Z"
DESCRIPTION
"Add the following new enumerations for object
ciscoVdcFeatureSetList
- virtualization(5)
- fabric(6)
- fcoeNpv(7)"
REVISION "201601190000Z"
DESCRIPTION
"Added 'm3' enumerator for ciscoVdcModuleCapList."
REVISION "201309240000Z"
DESCRIPTION
"Added 'f3' enumerator for ciscoVdcModuleCapList."
REVISION "201307020000Z"
DESCRIPTION
"Added MIN-ACCESS statement for the
following objects:
- ciscoVdcCombinedHostnameEnabled
- ciscoVdcName
- ciscoVdcRowStatus
- ciscoVdcAdminStatus
- ciscoVdcIfMembershipStorageType
- ciscoVdcIfMembershipStatus
- ciscoVdcFCoEVlansSecond2K
- ciscoVdcFCoEVlansFirst2K
- ciscoVdcFCoEVlansFromVdc
- ciscoVdcSharedInterfaceStorageType
- ciscoVdcSharedInterfaceRowStatus."
REVISION "201306080000Z"
DESCRIPTION
"Added following OBJECT-GROUP:
- ciscoVdcExtGroup
- ciscoVdcGlobalResUsageGroup
- ciscoVdcResUsageGroup
- ciscoVdcResTemplateGroup
- ciscoVdcGlobalGroup
- ciscoVdcIfMembershipGroup
- ciscoVdcFCoEVlansGroup
- ciscoVdcSharedInterfaceGroup
Added new compliance
- ciscoVdcMIBCompliance1."
REVISION "201105190000Z"
DESCRIPTION
"Initial version"
::= { ciscoMgmt 774 }
ciscoVdcMIBNotifs OBJECT IDENTIFIER
::= { ciscoVdcMIB 0 }
ciscoVdcMIBObjects OBJECT IDENTIFIER
::= { ciscoVdcMIB 1 }
ciscoVdcMIBConform OBJECT IDENTIFIER
::= { ciscoVdcMIB 2 }
ciscoVdcGlobal OBJECT IDENTIFIER
::= { ciscoVdcMIBObjects 2 }
ciscoVdcExt OBJECT IDENTIFIER
::= { ciscoVdcMIBObjects 3 }
ciscoVdcResource OBJECT IDENTIFIER
::= { ciscoVdcMIBObjects 4 }
ciscoVdcInterface OBJECT IDENTIFIER
::= { ciscoVdcMIBObjects 5 }
-- Textual Conventions
CiscoVdcHaPolicy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The High Availability policy for VDC.
reload - reload the supervisor module
restart - take down the VDC and recreate it
using the startup configuration
bringDown - put the VDC in failed state. To recover
from failed state, the physical device
must be reloaded
switchOver - initiate a supervisor module switchover"
SYNTAX INTEGER {
reload(0),
restart(1),
bringDown(2),
switchOver(3)
}
CiscoVdcPercentOrMinusOne ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An integer that is in the range of a percent value.
A value of -1 means that the percentage is not available."
SYNTAX Integer32 (-1 | 0..100)
-- The VDC Global Group
ciscoVdcMaxNumberVdcAllowed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of VDC instances
that can be created in the device."
::= { ciscoVdcGlobal 1 }
ciscoVdcCombinedHostnameEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the combined hostname
functionality is enabled or not.
When the combined hostname functionality is enabled,
the hostname of non-default VDCs will be
<default VDC name>-<nondefault VDC name>."
::= { ciscoVdcGlobal 2 }
ciscoVdcTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoVdcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries representing a VDC instance. There
will be an entry for each VDC instance created in the system."
::= { ciscoVdcMIBObjects 1 }
ciscoVdcEntry OBJECT-TYPE
SYNTAX CiscoVdcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing the information pertaining to a virtual
device instance.
A peer SNMP entity may create a virtual device instance by
setting an instance of ciscoVdcRowStatus to 'createAndWait' or
'createAndGo'. Observe that an implementation that does not
support these options must specify these limitations in an agent
capabilities statement.
Other management entities (e.g., the local console) may perform
actions resulting in the creation of a virtual device instance.
In these cases, the system must automatically create a row in
the ciscoVdcTable.
A peer SNMP entity may destroy a virtual device instance by
setting the corresponding instance of ciscoVdcRowStatus to
'destroy'. Observe that an implementation that does not support
this option must specify this limitation in an agent
capabilities statement.
Other management entities may perform actions resulting in the
destruction of a virtual device instance. In these cases, the
system must automatically destroy the corresponding row in the
ciscoVdcTable."
INDEX { ciscoVdcId }
::= { ciscoVdcTable 1 }
CiscoVdcEntry ::= SEQUENCE {
ciscoVdcId Unsigned32,
ciscoVdcName SnmpAdminString,
ciscoVdcState INTEGER,
ciscoVdcFcoeCapable INTEGER,
ciscoVdcMac MacAddress,
ciscoVdcSwitchId MacAddress,
ciscoVdcRowStatus RowStatus,
ciscoVdcStorageType StorageType
}
ciscoVdcId OBJECT-TYPE
SYNTAX Unsigned32 (1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an arbitrary integer-value that uniquely
identifies a virtual device instance."
::= { ciscoVdcEntry 1 }
ciscoVdcName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The human-readable name of the VDC instance. This name uniquely
identifies the VDC instance in the system."
::= { ciscoVdcEntry 2 }
ciscoVdcState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
suspended(2),
nonconfigured(3),
configured(4),
creating(5),
deleting(6),
failed(7),
pending(8),
updating(9),
restarting(10),
suspending(11),
resuming(12),
failing(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current operational state of the
virtual device."
::= { ciscoVdcEntry 3 }
ciscoVdcFcoeCapable OBJECT-TYPE
SYNTAX INTEGER {
disallowed(1),
allowed(2),
installed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the FCoE capabilities of the virtual
device."
::= { ciscoVdcEntry 4 }
ciscoVdcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the router MAC address of the virtual
device."
::= { ciscoVdcEntry 5 }
ciscoVdcSwitchId OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address of the device where the
virtual device instance is created."
::= { ciscoVdcEntry 6 }
ciscoVdcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create, modify, and/or delete a row in
this table.
In particular, a newly created row cannot be made active until
the ciscoVdcName value is set. ciscoVdcName may not be modified
while the value of this object is active(1). An attempt to set
ciscoVdcName while the value of RowStatus is active(1) will
result in an inconsistentValue error. Agent may delete any
virtual device which has ciscoVdcState of active(1) and
ciscoVdcRowStatus of Active."
::= { ciscoVdcEntry 7 }
ciscoVdcStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the storage type for this conceptual row.
The following columnar objects are allowed to be writable when
the storageType of this conceptual row is permanent(4):
none"
::= { ciscoVdcEntry 8 }
ciscoVdcExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoVdcExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains additional information of
a VDC instance. There will be an entry for each
VDC instance created in the system."
::= { ciscoVdcExt 1 }
ciscoVdcExtEntry OBJECT-TYPE
SYNTAX CiscoVdcExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains additional information of a VDC instance."
INDEX { ciscoVdcId }
::= { ciscoVdcExtTable 1 }
CiscoVdcExtEntry ::= SEQUENCE {
ciscoVdcSingleSupHaPolicy CiscoVdcHaPolicy,
ciscoVdcDualSupHaPolicy CiscoVdcHaPolicy,
ciscoVdcBootOrder Unsigned32,
ciscoVdcTimeCreated DateAndTime,
ciscoVdcReloadCount Gauge32,
ciscoVdcRestartCount Gauge32,
ciscoVdcRestartTime DateAndTime,
ciscoVdcRestartReason SnmpAdminString,
ciscoVdcType INTEGER,
ciscoVdcAdminStatus INTEGER,
ciscoVdcFromUnallocatedIntf INTEGER,
ciscoVdcFeatureSetList BITS,
ciscoVdcResourceTemplate SnmpAdminString,
ciscoVdcModuleCapList BITS,
ciscoVdcCpuPriority Integer32,
ciscoVdcCpuSharePercent CiscoVdcPercentOrMinusOne
}
ciscoVdcSingleSupHaPolicy OBJECT-TYPE
SYNTAX CiscoVdcHaPolicy
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the High Availability policy
of a particular VDC when there is only one supervisor
on the device."
DEFVAL { restart }
::= { ciscoVdcExtEntry 1 }
ciscoVdcDualSupHaPolicy OBJECT-TYPE
SYNTAX CiscoVdcHaPolicy
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the High Availability policy
of a particular VDC when both the active supervisor and
standby supervisor are present on the device."
DEFVAL { switchOver }
::= { ciscoVdcExtEntry 2 }
ciscoVdcBootOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the boot order value for this
particular VDC. The VDCs with the lowest boot order
will boot first."
::= { ciscoVdcExtEntry 3 }
ciscoVdcTimeCreated OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time at which a particular
VDC was created."
::= { ciscoVdcExtEntry 4 }
ciscoVdcReloadCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of times a particular
VDC has been reloaded."
::= { ciscoVdcExtEntry 5 }
ciscoVdcRestartCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of times a VDC identified
by ciscoVdcId has been restarted."
::= { ciscoVdcExtEntry 6 }
ciscoVdcRestartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the most recent restart time of
the VDC instance.
This object contains value 0x0000010100000000 when the
corresponding instance value of ciscoVdcRestartCount is '0'."
::= { ciscoVdcExtEntry 7 }
ciscoVdcRestartReason OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the reason of the most recent restart of
the VDC."
::= { ciscoVdcExtEntry 8 }
ciscoVdcType OBJECT-TYPE
SYNTAX INTEGER {
admin(1),
ethernet(2),
storage(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the VDC."
::= { ciscoVdcExtEntry 9 }
ciscoVdcAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
suspended(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the administrative status of the VDC.
active -- the VDC will be put into active state.
suspended -- the VDC will be put into paused state.
When the suspended VDC is bening resumed,
it will come up with its startup configuration."
::= { ciscoVdcExtEntry 10 }
ciscoVdcFromUnallocatedIntf OBJECT-TYPE
SYNTAX INTEGER {
noOp(1),
allocate(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the way that interfaces are
allocated from the unallocated interface pool.
When the value of this object is set to 'allocate',
interfaces in the unallocated interface pool will be
allocated to a particular VDC on a best-efforts basis.
This object always has the value 'noOp' when read."
::= { ciscoVdcExtEntry 11 }
ciscoVdcFeatureSetList OBJECT-TYPE
SYNTAX BITS {
fcoe(0),
fabricPath(1),
fex(2),
mpls(3),
ethernet(4),
virtualization(5),
fabric(6),
fcoeNpv(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether a specified feature set is
enabled for a VDC. If a bit corresponding to a feature
set is set to 1, then the specified feature set is enabled.
fcoe -- fiber channel over ethernet feature set.
fabricPath -- fabric path feature set.
fex -- fabric extender feature set.
mpls -- multiprotocol label switching feature set.
ethernet -- ethernet feature set.
virtualization -- virtual machine feature set.
fabric -- fabric feature set.
fcoeNpv -- fcoe Edge N-Port virtualizer feature set."
::= { ciscoVdcExtEntry 12 }
ciscoVdcResourceTemplate OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the name of the resource template
of the VDC."
::= { ciscoVdcExtEntry 13 }
ciscoVdcModuleCapList OBJECT-TYPE
SYNTAX BITS {
m1(0),
f1(1),
m1xl(2),
f2(3),
m2xl(4),
fc(5),
f2e(6),
f3(7),
m3(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies type of modules which are allowed
in this VDC. If a bit corresponding to a module type is
set to 1, then the specified module type is allowed
in the VDC.
m1 -- M1 series modules.
f1 -- F1 series modules.
m1xl -- M1XL series modules.
f2 -- F2 series modules.
m2xl -- M2XL series modules
fc -- Fiber Channel modules
f2e -- F2E series modules
f3 -- F3 series modules.
m3 -- M3 series modules."
::= { ciscoVdcExtEntry 14 }
ciscoVdcCpuPriority OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the CPU priority/share for a
particular VDC. A value of -1 means this information
is not available."
::= { ciscoVdcExtEntry 15 }
ciscoVdcCpuSharePercent OBJECT-TYPE
SYNTAX CiscoVdcPercentOrMinusOne
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the CPU share percentage for
a particular VDC."
::= { ciscoVdcExtEntry 16 }
-- The VDC Resource Group
ciscoVdcGlobalResUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoVdcGlobalResUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information regarding global resource
usage and utilization on the device."
::= { ciscoVdcResource 1 }
ciscoVdcGlobalResUsageEntry OBJECT-TYPE
SYNTAX CiscoVdcGlobalResUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains information regarding global usage and
utilization for a particular resource."
INDEX { ciscoVdcGlobalResID }
::= { ciscoVdcGlobalResUsageTable 1 }
CiscoVdcGlobalResUsageEntry ::= SEQUENCE {
ciscoVdcGlobalResID Unsigned32,
ciscoVdcGlobalResName SnmpAdminString,
ciscoVdcGlobalResUsed Unsigned32,
ciscoVdcGlobalResUnused Unsigned32,
ciscoVdcGlobalResFree Unsigned32,
ciscoVdcGlobalResAvail Unsigned32,
ciscoVdcGlobalResTotal Unsigned32
}
ciscoVdcGlobalResID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, that uniquely identifies
a type of resource."
::= { ciscoVdcGlobalResUsageEntry 1 }
ciscoVdcGlobalResName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the resource on the device."
::= { ciscoVdcGlobalResUsageEntry 2 }
ciscoVdcGlobalResUsed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of instances of a particular
resource that are currently in use."
::= { ciscoVdcGlobalResUsageEntry 3 }
ciscoVdcGlobalResUnused OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of instances of a particular
resource that are reserved, and currently not in use."
::= { ciscoVdcGlobalResUsageEntry 4 }
ciscoVdcGlobalResFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of instances of a particular
resource that still remain to be used."
::= { ciscoVdcGlobalResUsageEntry 5 }
ciscoVdcGlobalResAvail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of instances of a particular
resource that are available to be allocated."
::= { ciscoVdcGlobalResUsageEntry 6 }
ciscoVdcGlobalResTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of a
particular resource."
::= { ciscoVdcGlobalResUsageEntry 7 }
ciscoVdcResUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoVdcResUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information regarding resource usage
and utilization for a particular VDC."
::= { ciscoVdcResource 2 }
ciscoVdcResUsageEntry OBJECT-TYPE
SYNTAX CiscoVdcResUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains information regarding the usage and
utilization of a particular resource for a particular VDC."
INDEX {
ciscoVdcId,
ciscoVdcResID
}
::= { ciscoVdcResUsageTable 1 }
CiscoVdcResUsageEntry ::= SEQUENCE {
ciscoVdcResID Unsigned32,
ciscoVdcResMin Unsigned32,
ciscoVdcResMax Unsigned32,
ciscoVdcResUsed Unsigned32,
ciscoVdcResUnused Unsigned32,
ciscoVdcResAvail Unsigned32
}
ciscoVdcResID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, that uniquely identifies
a type of resource."
::= { ciscoVdcResUsageEntry 1 }
ciscoVdcResMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the minimum number of instances of a
particular resource that needs to be allocated to a particular
VDC."
::= { ciscoVdcResUsageEntry 2 }
ciscoVdcResMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of instances of a
particular resource that allow to be allocated to a particular
VDC."
::= { ciscoVdcResUsageEntry 3 }
ciscoVdcResUsed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of instances of a
particular resource that are currently in use for a
particular VDC."
::= { ciscoVdcResUsageEntry 4 }
ciscoVdcResUnused OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of instances of a particular
resource that are reserved, and currently not in use for a
particular VDC."
::= { ciscoVdcResUsageEntry 5 }
ciscoVdcResAvail OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of instances
of a particular resource that are available to
be allocated for a particular VDC."
::= { ciscoVdcResUsageEntry 6 }
ciscoVdcResTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoVdcResTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information regarding the resource
allocation for VDC resource template."
::= { ciscoVdcResource 3 }
ciscoVdcResTemplateEntry OBJECT-TYPE
SYNTAX CiscoVdcResTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains information regarding the allocation of a
particluar resource for a particular VDC resource template."
INDEX {
ciscoVdcResTemplateName,
ciscoVdcResTemplateResID
}
::= { ciscoVdcResTemplateTable 1 }
CiscoVdcResTemplateEntry ::= SEQUENCE {
ciscoVdcResTemplateName SnmpAdminString,
ciscoVdcResTemplateResID Unsigned32,
ciscoVdcResTemplateMin Unsigned32,
ciscoVdcResTemplateMax Unsigned32,
ciscoVdcResTemplateStorageType StorageType,
ciscoVdcResTemplateStatus RowStatus
}
ciscoVdcResTemplateName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of the resource template."
::= { ciscoVdcResTemplateEntry 1 }
ciscoVdcResTemplateResID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, that can identify
a type of resource."
::= { ciscoVdcResTemplateEntry 2 }
ciscoVdcResTemplateMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specified the minimum number of instances of a
particular resource that are allocated to this VDC template."
::= { ciscoVdcResTemplateEntry 3 }
ciscoVdcResTemplateMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the maximum number of instances of a
particular resource that are allocated to this VDC template."
::= { ciscoVdcResTemplateEntry 4 }
ciscoVdcResTemplateStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type of a conceptual row
in this table."
DEFVAL { volatile }
::= { ciscoVdcResTemplateEntry 5 }
ciscoVdcResTemplateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the status of a conceptual row in
this table.All writable objects in this row may be modified
at any time."
::= { ciscoVdcResTemplateEntry 6 }
-- The VDC Interface Group
ciscoVdcIfMembershipTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoVdcIfMembershipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about VDC interface
membership."
::= { ciscoVdcInterface 1 }
ciscoVdcIfMembershipEntry OBJECT-TYPE
SYNTAX CiscoVdcIfMembershipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing information about
VDC interface membership."
INDEX {
ciscoVdcId,
ciscoVdcIfMembershipifIndex
}
::= { ciscoVdcIfMembershipTable 1 }
CiscoVdcIfMembershipEntry ::= SEQUENCE {
ciscoVdcIfMembershipifIndex InterfaceIndex,
ciscoVdcIfMembershipStorageType StorageType,
ciscoVdcIfMembershipStatus RowStatus
}
ciscoVdcIfMembershipifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ifIndex of the interface membership of this VDC."
::= { ciscoVdcIfMembershipEntry 1 }
ciscoVdcIfMembershipStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type of a conceptual
row in this table."
DEFVAL { volatile }
::= { ciscoVdcIfMembershipEntry 2 }
ciscoVdcIfMembershipStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the row status of a conceptual
row in this table."
::= { ciscoVdcIfMembershipEntry 3 }
ciscoVdcFCoEVlansTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoVdcFCoEVlansEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information regarding allocation of
VLANs that can be used for FCoE."
::= { ciscoVdcInterface 2 }
ciscoVdcFCoEVlansEntry OBJECT-TYPE
SYNTAX CiscoVdcFCoEVlansEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing information regarding allocation of
VLANs that can be used for FCoE."
INDEX { ciscoVdcId }
::= { ciscoVdcFCoEVlansTable 1 }
CiscoVdcFCoEVlansEntry ::= SEQUENCE {
ciscoVdcFCoEVlansFirst2K Cisco2KVlanList,
ciscoVdcFCoEVlansSecond2K Cisco2KVlanList,
ciscoVdcFCoEVlansFromVdc Unsigned32
}
ciscoVdcFCoEVlansFirst2K OBJECT-TYPE
SYNTAX Cisco2KVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANs 0 to
2047 that are reserved for FCoE.
If the bit corresponding to a VLAN is set to '1', then the VLAN
is reserved for FCoE. If the bit is set to '0', then the VLAN
is not reserved for FCoE"
::= { ciscoVdcFCoEVlansEntry 1 }
ciscoVdcFCoEVlansSecond2K OBJECT-TYPE
SYNTAX Cisco2KVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANs 2048
to 4095 that are reserved for FCoE.
If the bit corresponding to a VLAN is set to '1', then the VLAN
is reserved for FCoE. If the bit is set to '0', then the VLAN
is not reserved for FCoE"
::= { ciscoVdcFCoEVlansEntry 2 }
ciscoVdcFCoEVlansFromVdc OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which VDCs are going to share ports
with the storage VDC."
::= { ciscoVdcFCoEVlansEntry 3 }
ciscoVdcSharedInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoVdcSharedInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about VDC shared interface
membership."
::= { ciscoVdcInterface 3 }
ciscoVdcSharedInterfaceEntry OBJECT-TYPE
SYNTAX CiscoVdcSharedInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing information about VDC
shared interface membership."
INDEX {
ciscoVdcId,
ciscoVdcSharedInterfaceifIndex
}
::= { ciscoVdcSharedInterfaceTable 1 }
CiscoVdcSharedInterfaceEntry ::= SEQUENCE {
ciscoVdcSharedInterfaceifIndex InterfaceIndex,
ciscoVdcSharedInterfaceStorageType StorageType,
ciscoVdcSharedInterfaceRowStatus RowStatus
}
ciscoVdcSharedInterfaceifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface."
::= { ciscoVdcSharedInterfaceEntry 1 }
ciscoVdcSharedInterfaceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type of a conceptual
row in this table"
DEFVAL { volatile }
::= { ciscoVdcSharedInterfaceEntry 2 }
ciscoVdcSharedInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the row status of a conceptual
row in this table."
::= { ciscoVdcSharedInterfaceEntry 3 }
ciscoVdcMIBCompliances OBJECT IDENTIFIER
::= { ciscoVdcMIBConform 1 }
ciscoVdcMIBGroups OBJECT IDENTIFIER
::= { ciscoVdcMIBConform 2 }
ciscoVdcMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"This compliance statement specifies the minimal requirements an
implementation must meet in order to claim full compliance with
the definition of the CISCO-VDC-MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoVdcGroup }
::= { ciscoVdcMIBCompliances 1 }
ciscoVdcMIBCompliance1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"This compliance statement specifies the minimal requirements an
implementation must meet in order to claim full compliance with
the definition of the CISCO-VDC-MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoVdcGroup }
GROUP ciscoVdcExtGroup
DESCRIPTION
"Implementation of this group is mandatory only for
the platforms which support additional VDC management
information."
GROUP ciscoVdcGlobalResUsageGroup
DESCRIPTION
"Implementation of this group is mandatory only for
the platforms which support global resource usage
and utilization."
GROUP ciscoVdcResUsageGroup
DESCRIPTION
"Implementation of this group is mandatory only for
the platforms which support per VDC resource usage
and utilization."
GROUP ciscoVdcResTemplateGroup
DESCRIPTION
"Implementation of this group is mandatory only for
the platforms which support resource allocation
template."
GROUP ciscoVdcGlobalGroup
DESCRIPTION
"Implementation of this group is mandatory only for
the platforms which support maximum VDC number and
combined hostname functionality."
GROUP ciscoVdcIfMembershipGroup
DESCRIPTION
"Implementation of this group is mandatory only for
the platforms which support VDC interface membership
functionality."
GROUP ciscoVdcFCoEVlansGroup
DESCRIPTION
"Implementation of this group is mandatory only for
the platforms which support FCoE VLAN allocation."
GROUP ciscoVdcSharedInterfaceGroup
DESCRIPTION
"Implementation of this group is mandatory only for
the platforms which support VDC interface
shared membership functionality."
OBJECT ciscoVdcCombinedHostnameEnabled
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcName
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcRowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcSingleSupHaPolicy
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcDualSupHaPolicy
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcBootOrder
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcType
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcFromUnallocatedIntf
SYNTAX INTEGER {
noOp(1)
}
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcFeatureSetList
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcResourceTemplate
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcModuleCapList
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcCpuPriority
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcResMin
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcResMax
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcResTemplateMin
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcResTemplateMax
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcResTemplateStorageType
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcResTemplateStatus
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcIfMembershipStorageType
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcIfMembershipStatus
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcFCoEVlansFirst2K
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcFCoEVlansSecond2K
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcFCoEVlansFromVdc
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcSharedInterfaceStorageType
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
OBJECT ciscoVdcSharedInterfaceRowStatus
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as
read-only."
::= { ciscoVdcMIBCompliances 2 }
-- This group contains objects describing virtual devices.
ciscoVdcGroup OBJECT-GROUP
OBJECTS {
ciscoVdcName,
ciscoVdcState,
ciscoVdcFcoeCapable,
ciscoVdcMac,
ciscoVdcSwitchId,
ciscoVdcRowStatus,
ciscoVdcStorageType
}
STATUS current
DESCRIPTION
"This group contains the objects describing virtual device
instances."
::= { ciscoVdcMIBGroups 1 }
ciscoVdcExtGroup OBJECT-GROUP
OBJECTS {
ciscoVdcSingleSupHaPolicy,
ciscoVdcDualSupHaPolicy,
ciscoVdcBootOrder,
ciscoVdcTimeCreated,
ciscoVdcReloadCount,
ciscoVdcRestartCount,
ciscoVdcRestartTime,
ciscoVdcRestartReason,
ciscoVdcType,
ciscoVdcAdminStatus,
ciscoVdcFromUnallocatedIntf,
ciscoVdcFeatureSetList,
ciscoVdcResourceTemplate,
ciscoVdcModuleCapList,
ciscoVdcCpuPriority,
ciscoVdcCpuSharePercent
}
STATUS current
DESCRIPTION
"This group contains the additional objects describing virtual
device instances."
::= { ciscoVdcMIBGroups 2 }
ciscoVdcGlobalResUsageGroup OBJECT-GROUP
OBJECTS {
ciscoVdcGlobalResName,
ciscoVdcGlobalResUsed,
ciscoVdcGlobalResUnused,
ciscoVdcGlobalResFree,
ciscoVdcGlobalResAvail,
ciscoVdcGlobalResTotal
}
STATUS current
DESCRIPTION
"This group contains the objects regarding global resource
usage and utilization on the device."
::= { ciscoVdcMIBGroups 3 }
ciscoVdcResUsageGroup OBJECT-GROUP
OBJECTS {
ciscoVdcResMin,
ciscoVdcResMax,
ciscoVdcResUsed,
ciscoVdcResUnused,
ciscoVdcResAvail
}
STATUS current
DESCRIPTION
"This group contains the objects regarding resource usage
and utilization for a particular VDC."
::= { ciscoVdcMIBGroups 4 }
ciscoVdcResTemplateGroup OBJECT-GROUP
OBJECTS {
ciscoVdcResTemplateMin,
ciscoVdcResTemplateMax,
ciscoVdcResTemplateStatus,
ciscoVdcResTemplateStorageType
}
STATUS current
DESCRIPTION
"This group contains the objects regarding the
resource allocation information for VDC resource
template."
::= { ciscoVdcMIBGroups 5 }
ciscoVdcGlobalGroup OBJECT-GROUP
OBJECTS {
ciscoVdcMaxNumberVdcAllowed,
ciscoVdcCombinedHostnameEnabled
}
STATUS current
DESCRIPTION
"This group contains the objets regarding global
information for VDC."
::= { ciscoVdcMIBGroups 6 }
ciscoVdcIfMembershipGroup OBJECT-GROUP
OBJECTS {
ciscoVdcIfMembershipStatus,
ciscoVdcIfMembershipStorageType
}
STATUS current
DESCRIPTION
"This group contains the object about VDC interface membership."
::= { ciscoVdcMIBGroups 7 }
ciscoVdcFCoEVlansGroup OBJECT-GROUP
OBJECTS {
ciscoVdcFCoEVlansFirst2K,
ciscoVdcFCoEVlansSecond2K,
ciscoVdcFCoEVlansFromVdc
}
STATUS current
DESCRIPTION
"This group contains the objects regarding allocation of
VLANs that can be used for FCoE."
::= { ciscoVdcMIBGroups 8 }
ciscoVdcSharedInterfaceGroup OBJECT-GROUP
OBJECTS {
ciscoVdcSharedInterfaceRowStatus,
ciscoVdcSharedInterfaceStorageType
}
STATUS current
DESCRIPTION
"This group contains object about VDC interface
shared membership."
::= { ciscoVdcMIBGroups 9 }
END