WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/cisco/CISCO-TRUSTSEC-POLICY-MIB

3020 lines
95 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-TRUSTSEC-POLICY-MIB.my
--
-- November 2009, Edward Pham
--
-- Copyright (c) 2009, 2011-2012 by cisco Systems Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-TRUSTSEC-POLICY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Counter64
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
DateAndTime,
StorageType,
RowStatus
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
CtsSecurityGroupTag,
CtsGenerationId,
CtsAclName,
CtsAclList,
CtsAclListOrEmpty,
CtsAclNameOrEmpty,
CtsSgaclMonitorMode
FROM CISCO-TRUSTSEC-TC-MIB
InetAddressType,
InetAddress,
InetAddressPrefixLength
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
VlanIndex
FROM Q-BRIDGE-MIB
CiscoVrfName,
Cisco2KVlanList
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoTrustSecPolicyMIB MODULE-IDENTITY
LAST-UPDATED "201212190000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"This MIB module defines managed objects that facilitate the
management of various policies within the Cisco Trusted Security
(TrustSec) infrastructure.
The information available through this MIB includes:
o Device and interface level configuration for enabling
SGACL (Security Group Access Control List) enforcement
on Layer2/3 traffic.
o Administrative and operational SGACL mapping to Security
Group Tag (SGT).
o Various statistics counters for traffic subject to SGACL
enforcement.
o TrustSec policies with respect to peer device.
o Interface level configuration for enabling the propagation
of SGT along with the Layer 3 traffic in portions of network
which does not have the capability to support TrustSec
feature.
o TrustSec policies with respect to SGT propagation with
Layer 3 traffic.
The following terms are used throughout this MIB:
VRF: Virtual Routing and Forwarding.
SGACL: Security Group Access Control List.
ACE: Access Control Entries.
SXP: SGT Propagation Protocol.
SVI: Switch Virtual Interface.
IPM: Identity Port Mapping.
SGT (Security Group Tag) is a unique 16 bits value assigned
to every security group and used by network devices to
enforce SGACL.
Peer is another device connected to the local device on the
other side of a TrustSec link.
Default Policy: Policy applied to traffic when there is
no explicit policy between the SGT associated with the
originator of the traffic and the SGT associated with
the destination of the traffic."
REVISION "201212190000Z"
DESCRIPTION
"Added following OBJECT-GROUP:
- ctspNotifCtrlGroup
- ctspNotifGroup
- ctspNotifInfoGroup
- ctspIfSgtMappingGroup
- ctspVlanSgtMappingGroup
- ctspSgtCachingGroup
- ctspSgaclMonitorGroup
- ctspSgaclMonitorStatisticGroup
Added new compliance
- ciscoTrustSecPolicyMIBCompliances
Modified ctspIpSgtSource to add l3if(6), vlan(7), caching(8)."
REVISION "200911060000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 713 }
ciscoTrustSecPolicyMIBNotifs OBJECT IDENTIFIER
::= { ciscoTrustSecPolicyMIB 0 }
ciscoTrustSecPolicyMIBObjects OBJECT IDENTIFIER
::= { ciscoTrustSecPolicyMIB 1 }
ciscoTrustSecPolicyMIBConformance OBJECT IDENTIFIER
::= { ciscoTrustSecPolicyMIB 2 }
ctspSgacl
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 1 }
ctspPeerPolicy
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 2 }
ctspLayer3Transport
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 3 }
ctspIpSgtMappings
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 4 }
ctspSgtPolicy
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 5 }
ctspIfSgtMappings
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 6 }
ctspVlanSgtMappings
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 7 }
ctspSgtCaching
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 8 }
ctspNotifsControl
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 9 }
ctspNotifsOnlyInfo
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBObjects 10 }
ctspSgaclGlobals
OBJECT IDENTIFIER ::= { ctspSgacl 1 }
ctspSgaclMappings
OBJECT IDENTIFIER ::= { ctspSgacl 2 }
ctspSgaclStatistics
OBJECT IDENTIFIER ::= { ctspSgacl 3 }
--
-- ctspSgaclGlobals
--
ctspSgaclEnforcementEnable OBJECT-TYPE
SYNTAX INTEGER {
none(1),
l3Only(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether SGACL enforcement for all
Layer 3 interfaces (excluding SVIs) is enabled at the
managed system.
'none' indicates that SGACL enforcement for all Layer 3
interfaces (excluding SVIs) is disabled.
'l3Only' indicates that SGACL enforcement is enabled on
every TrustSec capable Layer3 interface (excluding SVIs)
in the device."
::= { ctspSgaclGlobals 1 }
ctspSgaclIpv4DropNetflowMonitor OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies an existing flexible netflow monitor
name used to collect and export the IPv4 traffic dropped
packets statistics due to SGACL enforcement. The zero-length
string indicates that no such netflow monitor is configured
in the device."
::= { ctspSgaclGlobals 2 }
ctspSgaclIpv6DropNetflowMonitor OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies an existing flexible netflow monitor
name used to collect and export the IPv6 traffic dropped
packets statistics due to SGACL enforcement. The zero-length
string indicates that no such netflow monitor is configured
in the device."
::= { ctspSgaclGlobals 3 }
ctspVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the SGACL enforcement for Layer 2 and
Layer 3 switched packet in a VLAN as well as VRF information
for VLANs in the device."
::= { ctspSgaclGlobals 4 }
ctspVlanConfigEntry OBJECT-TYPE
SYNTAX CtspVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the SGACL enforcement information
for Layer 2 and Layer 3 switched packets in a VLAN
identified by its VlanIndex value. Entry in this
table is populated for VLANs which contains SGACL
enforcement or VRF configuration."
INDEX { ctspVlanConfigIndex }
::= { ctspVlanConfigTable 1 }
CtspVlanConfigEntry ::= SEQUENCE {
ctspVlanConfigIndex VlanIndex,
ctspVlanConfigSgaclEnforcement TruthValue,
ctspVlanSviActive TruthValue,
ctspVlanConfigVrfName CiscoVrfName,
ctspVlanConfigStorageType StorageType,
ctspVlanConfigRowStatus RowStatus
}
ctspVlanConfigIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VLAN-ID of this VLAN."
::= { ctspVlanConfigEntry 1 }
ctspVlanConfigSgaclEnforcement OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the configured SGACL enforcement
status for this VLAN i.e., 'true' = enabled and
'false' = disabled."
::= { ctspVlanConfigEntry 2 }
ctspVlanSviActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if there is an active SVI
associated with this VLAN.
'true' indicates that there is an active SVI associated
with this VLAN. and SGACL is enforced for both Layer 2 and
Layer 3 switched packets within that VLAN.
'false' indicates that there is no active SVI associated
with this VLAN, and SGACL is only enforced for Layer 2
switched packets within that VLAN."
::= { ctspVlanConfigEntry 3 }
ctspVlanConfigVrfName OBJECT-TYPE
SYNTAX CiscoVrfName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies an existing VRF where this VLAN
belongs to. The zero length value indicates this VLAN
belongs to the default VRF."
::= { ctspVlanConfigEntry 4 }
ctspVlanConfigStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The objects specifies the storage type for this conceptual
row."
DEFVAL { volatile }
::= { ctspVlanConfigEntry 5 }
ctspVlanConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object
is used to manage creation and deletion of rows in this
table. When this object value is 'active', other
writable objects in the same row cannot be modified."
::= { ctspVlanConfigEntry 6 }
--
-- ctspSgaclMappings
--
ctspConfigSgaclMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspConfigSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the SGACLs information which is
applied to unicast IP traffic which carries a source SGT
and travels to a destination SGT."
::= { ctspSgaclMappings 1 }
ctspConfigSgaclMappingEntry OBJECT-TYPE
SYNTAX CtspConfigSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the SGACL mapping to source and destination
SGT for a certain traffic type as well as status of this
instance. A row instance can be created or removed by setting
the appropriate value of its RowStatus object."
INDEX { ctspConfigSgaclMappingIpTrafficType,
ctspConfigSgaclMappingDestSgt,
ctspConfigSgaclMappingSourceSgt }
::= { ctspConfigSgaclMappingTable 1 }
CtspConfigSgaclMappingEntry ::= SEQUENCE {
ctspConfigSgaclMappingIpTrafficType INTEGER,
ctspConfigSgaclMappingDestSgt CtsSecurityGroupTag,
ctspConfigSgaclMappingSourceSgt CtsSecurityGroupTag,
ctspConfigSgaclMappingSgaclName CtsAclList,
ctspConfigSgaclMappingStorageType StorageType,
ctspConfigSgaclMappingRowStatus RowStatus,
ctspConfigSgaclMonitor CtsSgaclMonitorMode
}
ctspConfigSgaclMappingIpTrafficType OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the unicast IP traffic
carrying the source SGT and travelling to destination
SGT and subjected to SGACL enforcement."
::= { ctspConfigSgaclMappingEntry 1 }
ctspConfigSgaclMappingDestSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the destination SGT value. Value of
zero indicates that the destination SGT is unknown."
::= { ctspConfigSgaclMappingEntry 2 }
ctspConfigSgaclMappingSourceSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the source SGT value. Value of zero
indicates that the source SGT is unknown."
::= { ctspConfigSgaclMappingEntry 3 }
ctspConfigSgaclMappingSgaclName OBJECT-TYPE
SYNTAX CtsAclList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the list of existing SGACLs which is
administratively configured to apply to unicast IP traffic
carrying the source SGT to the destination SGT."
::= { ctspConfigSgaclMappingEntry 4 }
ctspConfigSgaclMappingStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row."
DEFVAL { volatile }
::= { ctspConfigSgaclMappingEntry 5 }
ctspConfigSgaclMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage the creation and deletion
of rows in this table. ctspConfigSgaclName may be modified
at any time."
::= { ctspConfigSgaclMappingEntry 6 }
ctspConfigSgaclMonitor OBJECT-TYPE
SYNTAX CtsSgaclMonitorMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether SGACL monitor mode is turned on
for the configured SGACL enforced traffic."
DEFVAL { off }
::= { ctspConfigSgaclMappingEntry 7 }
ctspDefConfigIpv4Sgacls OBJECT-TYPE
SYNTAX CtsAclListOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the SGACLs of the unicast default
policy for IPv4 traffic. If there is no SGACL configured
for unicast default policy for IPv4 traffic, the value of
this object is the zero-length string."
::= { ctspSgaclMappings 2 }
ctspDefConfigIpv6Sgacls OBJECT-TYPE
SYNTAX CtsAclListOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the SGACLs of the unicast default
policy for IPv6 traffic. If there is no SGACL configured
for unicast default policy for IPv6 traffic, the value of
this object is the zero-length string."
::= { ctspSgaclMappings 3 }
--
-- The ctspDownloadedSgaclMappingTable
--
ctspDownloadedSgaclMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspDownloadedSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the downloaded SGACLs information
applied to unicast IP traffic which carries a source SGT
and travels to a destination SGT."
::= { ctspSgaclMappings 4 }
ctspDownloadedSgaclMappingEntry OBJECT-TYPE
SYNTAX CtspDownloadedSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the downloaded SGACLs mapping.
A row instance is added for each pair of <source SGT,
destination SGT> which contains SGACL that
is dynamically downloaded from ACS server."
INDEX { ctspDownloadedSgaclDestSgt,
ctspDownloadedSgaclSourceSgt,
ctspDownloadedSgaclIndex }
::= { ctspDownloadedSgaclMappingTable 1 }
CtspDownloadedSgaclMappingEntry ::= SEQUENCE {
ctspDownloadedSgaclDestSgt CtsSecurityGroupTag,
ctspDownloadedSgaclSourceSgt CtsSecurityGroupTag,
ctspDownloadedSgaclIndex Unsigned32,
ctspDownloadedSgaclName CtsAclName,
ctspDownloadedSgaclGenId CtsGenerationId,
ctspDownloadedIpTrafficType BITS,
ctspDownloadedSgaclMonitor CtsSgaclMonitorMode
}
ctspDownloadedSgaclDestSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the destination SGT value. Value of
zero indicates that the destination SGT is unknown."
::= { ctspDownloadedSgaclMappingEntry 1 }
ctspDownloadedSgaclSourceSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the source SGT value. Value of
zero indicates that the source SGT is unknown."
::= { ctspDownloadedSgaclMappingEntry 2 }
ctspDownloadedSgaclIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the downloaded SGACL which is
applied to unicast IP traffic carrying the source SGT
to the destination SGT."
::= { ctspDownloadedSgaclMappingEntry 3 }
ctspDownloadedSgaclName OBJECT-TYPE
SYNTAX CtsAclName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of downloaded SGACL
which is applied to unicast IP traffic carrying the source
SGT to the destination SGT."
::= { ctspDownloadedSgaclMappingEntry 4 }
ctspDownloadedSgaclGenId OBJECT-TYPE
SYNTAX CtsGenerationId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the generation identification of
downloaded SGACL which is applied to unicast IP traffic
carrying the source SGT to the destination SGT."
::= { ctspDownloadedSgaclMappingEntry 5 }
ctspDownloadedIpTrafficType OBJECT-TYPE
SYNTAX BITS { ipv4(0), ipv6(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of the unicast IP traffic
carrying the source SGT and travelling to destination
SGT and subjected to SGACL enforcement by this downloaded
default policy."
::= { ctspDownloadedSgaclMappingEntry 6 }
ctspDownloadedSgaclMonitor OBJECT-TYPE
SYNTAX CtsSgaclMonitorMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether SGACL monitor mode is turned on
for the downloaded SGACL enforced traffic."
::= { ctspDownloadedSgaclMappingEntry 7 }
--
-- The ctspDefDownloadedSgaclMappingTable
--
ctspDefDownloadedSgaclMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspDefDownloadedSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the downloaded SGACLs information
of the default policy applied to unicast IP traffic."
::= { ctspSgaclMappings 5 }
ctspDefDownloadedSgaclMappingEntry OBJECT-TYPE
SYNTAX CtspDefDownloadedSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the downloaded SGACLs mapping.
A row instance contains the SGACL information of the default
policy dynamically downloaded from ACS server for unicast
IP traffic."
INDEX { ctspDefDownloadedSgaclIndex }
::= { ctspDefDownloadedSgaclMappingTable 1 }
CtspDefDownloadedSgaclMappingEntry ::= SEQUENCE {
ctspDefDownloadedSgaclIndex Unsigned32,
ctspDefDownloadedSgaclName CtsAclName,
ctspDefDownloadedSgaclGenId CtsGenerationId,
ctspDefDownloadedIpTrafficType BITS,
ctspDefDownloadedSgaclMonitor CtsSgaclMonitorMode
}
ctspDefDownloadedSgaclIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the SGACL of downloaded default
policy applied to unicast IP traffic."
::= { ctspDefDownloadedSgaclMappingEntry 1 }
ctspDefDownloadedSgaclName OBJECT-TYPE
SYNTAX CtsAclName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the SGACL of downloaded
default policy applied to unicast IP traffic."
::= { ctspDefDownloadedSgaclMappingEntry 2 }
ctspDefDownloadedSgaclGenId OBJECT-TYPE
SYNTAX CtsGenerationId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the generation identification
of the SGACL of downloaded default policy applied to
unicast IP traffic."
::= { ctspDefDownloadedSgaclMappingEntry 3 }
ctspDefDownloadedIpTrafficType OBJECT-TYPE
SYNTAX BITS { ipv4(0), ipv6(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of the IP traffic
subjected to SGACL enforcement by this downloaded
default policy."
::= { ctspDefDownloadedSgaclMappingEntry 4 }
ctspDefDownloadedSgaclMonitor OBJECT-TYPE
SYNTAX CtsSgaclMonitorMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether SGACL monitor mode is turned on
for the default downloaded SGACL enforced traffic."
::= { ctspDefDownloadedSgaclMappingEntry 5 }
--
-- The ctspOperSgaclMappingTable
--
ctspOperSgaclMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspOperSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the operational SGACLs information
applied to unicast IP traffic which carries a source SGT
and travels to a destination SGT."
::= { ctspSgaclMappings 6 }
ctspOperSgaclMappingEntry OBJECT-TYPE
SYNTAX CtspOperSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the operational SGACLs mapping.
A row instance is added for each pair of <source SGT,
destination SGT> which contains the SGACL that
either statically configured at the device or dynamically
downloaded from ACS server."
INDEX { ctspOperIpTrafficType,
ctspOperSgaclDestSgt,
ctspOperSgaclSourceSgt,
ctspOperSgaclIndex }
::= { ctspOperSgaclMappingTable 1 }
CtspOperSgaclMappingEntry ::= SEQUENCE {
ctspOperIpTrafficType INTEGER,
ctspOperSgaclDestSgt CtsSecurityGroupTag,
ctspOperSgaclSourceSgt CtsSecurityGroupTag,
ctspOperSgaclIndex Unsigned32,
ctspOperationalSgaclName CtsAclName,
ctspOperationalSgaclGenId CtsGenerationId,
ctspOperSgaclMappingSource INTEGER,
ctspOperSgaclConfigSource INTEGER,
ctspOperSgaclMonitor CtsSgaclMonitorMode
}
ctspOperIpTrafficType OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the unicast IP traffic
carrying the source SGT and travelling to destination
SGT and subjected to SGACL enforcement."
::= { ctspOperSgaclMappingEntry 1 }
ctspOperSgaclDestSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the destination SGT value. Value of
zero indicates that the destination SGT is unknown."
::= { ctspOperSgaclMappingEntry 2 }
ctspOperSgaclSourceSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the source SGT value. Value of
zero indicates that the source SGT is unknown."
::= { ctspOperSgaclMappingEntry 3 }
ctspOperSgaclIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the SGACL operationally
applied to unicast IP traffic carrying the source SGT
to the destination SGT."
::= { ctspOperSgaclMappingEntry 4 }
ctspOperationalSgaclName OBJECT-TYPE
SYNTAX CtsAclName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the SGACL operationally
applied to unicast IP traffic carrying the source SGT to the
destination SGT."
::= { ctspOperSgaclMappingEntry 5 }
ctspOperationalSgaclGenId OBJECT-TYPE
SYNTAX CtsGenerationId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the generation identification
of the SGACL operationally applied to unicast IP traffic
carrying the source SGT to the destination SGT."
::= { ctspOperSgaclMappingEntry 6 }
ctspOperSgaclMappingSource OBJECT-TYPE
SYNTAX INTEGER { configured(1), downloaded(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the source of SGACL mapping
for the SGACL operationally applied to unicast IP traffic
carrying the source SGT to the destination SGT.
'downloaded' indicates that the mapping is downloaded
from ACS server.
'configured' indicates that the mapping is locally
configured in the device."
::= { ctspOperSgaclMappingEntry 7 }
ctspOperSgaclConfigSource OBJECT-TYPE
SYNTAX INTEGER { configured(1), downloaded(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the source of SGACL creation
for this SGACL.
'configured' indicates that the SGACL is locally
configured in the local device.
'downloaded' indicates that the SGACL is created at
ACS server and downloaded to the local device."
::= { ctspOperSgaclMappingEntry 8 }
ctspOperSgaclMonitor OBJECT-TYPE
SYNTAX CtsSgaclMonitorMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether SGACL monitor mode is turned on
for the SGACL enforced traffic."
::= { ctspOperSgaclMappingEntry 9 }
--
-- The ctspDefOperSgaclMappingTable
--
ctspDefOperSgaclMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspDefOperSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the operational SGACLs information
of the default policy applied to unicast IP traffic."
::= { ctspSgaclMappings 7 }
ctspDefOperSgaclMappingEntry OBJECT-TYPE
SYNTAX CtspDefOperSgaclMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance contains the SGACL information of the default
policy which is either statically configured at the device
or dynamically downloaded from ACS server for unicast
IP traffic."
INDEX { ctspDefOperIpTrafficType,
ctspDefOperSgaclIndex }
::= { ctspDefOperSgaclMappingTable 1 }
CtspDefOperSgaclMappingEntry ::= SEQUENCE {
ctspDefOperIpTrafficType INTEGER,
ctspDefOperSgaclIndex Unsigned32,
ctspDefOperationalSgaclName CtsAclName,
ctspDefOperationalSgaclGenId CtsGenerationId,
ctspDefOperSgaclMappingSource INTEGER,
ctspDefOperSgaclConfigSource INTEGER,
ctspDefOperSgaclMonitor CtsSgaclMonitorMode
}
ctspDefOperIpTrafficType OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the unicast IP
traffic subjected to default policy enforcement."
::= { ctspDefOperSgaclMappingEntry 1 }
ctspDefOperSgaclIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the SGACL of default policy
operationally applied to unicast IP traffic."
::= { ctspDefOperSgaclMappingEntry 2 }
ctspDefOperationalSgaclName OBJECT-TYPE
SYNTAX CtsAclName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the SGACL of default
policy operationally applied to unicast IP traffic."
::= { ctspDefOperSgaclMappingEntry 3 }
ctspDefOperationalSgaclGenId OBJECT-TYPE
SYNTAX CtsGenerationId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the generation identification
of the SGACL of default policy operationally
applied to unicast IP traffic."
::= { ctspDefOperSgaclMappingEntry 4 }
ctspDefOperSgaclMappingSource OBJECT-TYPE
SYNTAX INTEGER { configured(1), downloaded(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the source of SGACL mapping
for the SGACL of default policy operationally
applied to unicast IP traffic.
'downloaded' indicates that the mapping is downloaded
from ACS server.
'configured' indicates that the mapping is locally
configured in the device."
::= { ctspDefOperSgaclMappingEntry 5 }
ctspDefOperSgaclConfigSource OBJECT-TYPE
SYNTAX INTEGER { configured(1), downloaded(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the source of SGACL creation
for the SGACL of default policy operationally
applied to unicast IP traffic.
'downloaded' indicates that the SGACL is created at
ACS server and downloaded to the local device.
'configured' indicates that the SGACL is locally
configured in the local device."
::= { ctspDefOperSgaclMappingEntry 6 }
ctspDefOperSgaclMonitor OBJECT-TYPE
SYNTAX CtsSgaclMonitorMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether SGACL monitor mode is turned on
for the SGACL of default policy enforced traffic."
::= { ctspDefOperSgaclMappingEntry 7 }
--
-- ctspSgaclStatistics
--
ctspDefConfigIpv4SgaclsMonitor OBJECT-TYPE
SYNTAX CtsSgaclMonitorMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether SGACL monitor mode is turned on
for the default configured SGACL enforced Ipv4 traffic."
::= { ctspSgaclMappings 8 }
ctspDefConfigIpv6SgaclsMonitor OBJECT-TYPE
SYNTAX CtsSgaclMonitorMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether SGACL monitor mode is turned on
for the default configured SGACL enforced Ipv6 traffic."
::= { ctspSgaclMappings 9 }
ctspSgaclMonitorEnable OBJECT-TYPE
SYNTAX CtsSgaclMonitorMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether SGACL monitor mode is turned on
for the entire system. It has precedence than the per SGACL
ctspConfigSgaclMonitor control. It could act as safety
mechanism to turn off monitor in case the monitor feature
impact system performance."
::= { ctspSgaclMappings 10 }
--
-- ctspSgaclStatistics
--
ctspSgtStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspSgtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes SGACL statistics counters per
a pair of <source SGT, destination SGT> that is
capable of providing this information."
::= { ctspSgaclStatistics 1 }
ctspSgtStatsEntry OBJECT-TYPE
SYNTAX CtspSgtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the SGACL statistics related to
IPv4 or IPv6 packets carrying the source SGT travelling
to the destination SGT and subjected to SGACL enforcement."
INDEX { ctspStatsIpTrafficType,
ctspStatsDestSgt,
ctspStatsSourceSgt
}
::= { ctspSgtStatsTable 1 }
CtspSgtStatsEntry ::= SEQUENCE {
ctspStatsIpTrafficType INTEGER,
ctspStatsDestSgt CtsSecurityGroupTag,
ctspStatsSourceSgt CtsSecurityGroupTag,
ctspStatsIpSwDropPkts Counter64,
ctspStatsIpHwDropPkts Counter64,
ctspStatsIpSwPermitPkts Counter64,
ctspStatsIpHwPermitPkts Counter64,
ctspStatsIpSwMonitorPkts Counter64,
ctspStatsIpHwMonitorPkts Counter64
}
ctspStatsIpTrafficType OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the unicast IP traffic
carrying the source SGT and travelling to destination
SGT and subjected to SGACL enforcement."
::= { ctspSgtStatsEntry 1 }
ctspStatsDestSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the destination SGT value. Value of
zero indicates that the destination SGT is unknown."
::= { ctspSgtStatsEntry 2 }
ctspStatsSourceSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the source SGT value. Value of
zero indicates that the source SGT is unknown."
::= { ctspSgtStatsEntry 3 }
ctspStatsIpSwDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of software-forwarded
IP packets which are dropped by SGACL."
::= { ctspSgtStatsEntry 4 }
ctspStatsIpHwDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of hardware-forwarded
IP packets which are dropped by SGACL."
::= { ctspSgtStatsEntry 5 }
ctspStatsIpSwPermitPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of software-forwarded
IP packets which are permitted by SGACL."
::= { ctspSgtStatsEntry 6 }
ctspStatsIpHwPermitPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of hardware-forwarded
IP packets which are permitted by SGACL."
::= { ctspSgtStatsEntry 7 }
ctspStatsIpSwMonitorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of software-forwarded
IP packets which are SGACL enforced & monitored."
::= { ctspSgtStatsEntry 8 }
ctspStatsIpHwMonitorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of hardware-forwarded
IP packets which are SGACL enforced & monitored."
::= { ctspSgtStatsEntry 9 }
ctspDefStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspDefStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes statistics counters for unicast
IP traffic subjected to default unicast policy."
::= { ctspSgaclStatistics 2 }
ctspDefStatsEntry OBJECT-TYPE
SYNTAX CtspDefStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the statistics counter for each IP
traffic type."
INDEX { ctspDefIpTrafficType }
::= { ctspDefStatsTable 1 }
CtspDefStatsEntry ::= SEQUENCE {
ctspDefIpTrafficType INTEGER,
ctspDefIpSwDropPkts Counter64,
ctspDefIpHwDropPkts Counter64,
ctspDefIpSwPermitPkts Counter64,
ctspDefIpHwPermitPkts Counter64,
ctspDefIpSwMonitorPkts Counter64,
ctspDefIpHwMonitorPkts Counter64
}
ctspDefIpTrafficType OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the IP traffic
subjected to default unicast policy enforcement."
::= { ctspDefStatsEntry 1 }
ctspDefIpSwDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of software-forwarded
IP packets which are dropped by default unicast policy."
::= { ctspDefStatsEntry 2 }
ctspDefIpHwDropPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of hardware-forwarded
IP packets which are dropped by default unicast policy."
::= { ctspDefStatsEntry 3 }
ctspDefIpSwPermitPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of software-forwarded
IP packets which are permitted by default unicast policy."
::= { ctspDefStatsEntry 4 }
ctspDefIpHwPermitPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of hardware-forwarded
IP packets which are permitted by default unicast policy."
::= { ctspDefStatsEntry 5 }
ctspDefIpSwMonitorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of software-forwarded
IP packets which are monitored by default unicast policy."
::= { ctspDefStatsEntry 6 }
ctspDefIpHwMonitorPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of hardware-forwarded
IP packets which are monitored by default unicast policy."
::= { ctspDefStatsEntry 7 }
--
-- ctsPeerPolicy group
--
ctspAllPeerPolicyAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
refresh(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the action to be taken
with respect to all peer policies in the device.
When read, this object always returns the value 'none'.
'none' - No operation.
'refresh' - Refresh all peer policies in the device."
::= { ctspPeerPolicy 1 }
ctspPeerPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspPeerPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the peer policy information for each peer
device."
::= { ctspPeerPolicy 2 }
ctspPeerPolicyEntry OBJECT-TYPE
SYNTAX CtspPeerPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the managed objects for peer policies
for each peer device based on its name."
INDEX { IMPLIED ctspPeerName }
::= { ctspPeerPolicyTable 1 }
CtspPeerPolicyEntry ::= SEQUENCE {
ctspPeerName SnmpAdminString,
ctspPeerSgt CtsSecurityGroupTag,
ctspPeerSgtGenId CtsGenerationId,
ctspPeerTrustState INTEGER,
ctspPeerPolicyLifeTime Unsigned32,
ctspPeerPolicyLastUpdate DateAndTime,
ctspPeerPolicyAction INTEGER
}
ctspPeerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..128))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a peer device."
::= { ctspPeerPolicyEntry 1 }
ctspPeerSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the SGT value of this peer device."
::= { ctspPeerPolicyEntry 2 }
ctspPeerSgtGenId OBJECT-TYPE
SYNTAX CtsGenerationId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the generation identification of
the SGT value assigned to this peer device."
::= { ctspPeerPolicyEntry 3 }
ctspPeerTrustState OBJECT-TYPE
SYNTAX INTEGER { trusted(1), noTrust(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the TrustSec trust state of this
peer device.
'trusted' indicates that this is a trusted peer device.
'noTrust' indicates that this peer device is not trusted."
::= { ctspPeerPolicyEntry 4 }
ctspPeerPolicyLifeTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the policy life time which
provides the time interval during which the peer
policy is valid."
::= { ctspPeerPolicyEntry 5 }
ctspPeerPolicyLastUpdate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time when this peer policy
is last updated."
::= { ctspPeerPolicyEntry 6 }
ctspPeerPolicyAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
refresh(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the action to be taken
with this peer policy.
When read, this object always returns the value 'none'.
'none' - No operation.
'refresh' - Refresh this peer policy."
::= { ctspPeerPolicyEntry 7 }
--
-- ctspLayer3Transport
--
ctspLayer3PolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspLayer3PolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes Layer 3 transport policy for
IP traffic regarding SGT propagation."
::= { ctspLayer3Transport 1 }
ctspLayer3PolicyEntry OBJECT-TYPE
SYNTAX CtspLayer3PolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the Layer 3 transport policies per
IP traffic type per policy type."
INDEX { ctspLayer3PolicyIpTrafficType, ctspLayer3PolicyType }
::= { ctspLayer3PolicyTable 1 }
CtspLayer3PolicyEntry ::= SEQUENCE {
ctspLayer3PolicyIpTrafficType INTEGER,
ctspLayer3PolicyType INTEGER,
ctspLayer3PolicyLocalConfig CtsAclNameOrEmpty,
ctspLayer3PolicyDownloaded CtsAclNameOrEmpty,
ctspLayer3PolicyOperational CtsAclNameOrEmpty
}
ctspLayer3PolicyIpTrafficType OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the IP traffic
affected by Layer-3 transport policy.
'ipv4' indicates that the affected traffic is IPv4
traffic.
'ipv6' indicates that the affected traffic is IPv6
traffic."
::= { ctspLayer3PolicyEntry 1 }
ctspLayer3PolicyType OBJECT-TYPE
SYNTAX INTEGER { permit(1), exception(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the Layer-3
transport policy affecting IP traffic regarding
SGT propagation.
'permit' indicates that the transport policy is used
to classify Layer-3 traffic which is subject to
SGT propagation.
'exception' indicates that the transport policy is used
to classify Layer-3 traffic which is NOT subject to
SGT propagation."
::= { ctspLayer3PolicyEntry 2 }
ctspLayer3PolicyLocalConfig OBJECT-TYPE
SYNTAX CtsAclNameOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the name of an ACL that is
administratively configured to classify Layer3
traffic. Zero-length string indicates there is no
such configured policy."
::= { ctspLayer3PolicyEntry 3 }
ctspLayer3PolicyDownloaded OBJECT-TYPE
SYNTAX CtsAclNameOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the name of an ACL that is
downloaded from policy server to classify Layer3
traffic. Zero-length string indicates there is no
such downloaded policy."
::= { ctspLayer3PolicyEntry 4 }
ctspLayer3PolicyOperational OBJECT-TYPE
SYNTAX CtsAclNameOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the name of an operational ACL
currently used to classify Layer3 traffic. Zero-length
string indicates there is no such policy in effect."
::= { ctspLayer3PolicyEntry 5 }
ctspIfL3PolicyConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspIfL3PolicyConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the interfaces which support Layer3
Transport policy."
::= { ctspLayer3Transport 2 }
ctspIfL3PolicyConfigEntry OBJECT-TYPE
SYNTAX CtspIfL3PolicyConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains managed objects for Layer3 Transport
on interface capable of providing this information."
INDEX { ifIndex }
::= { ctspIfL3PolicyConfigTable 1 }
CtspIfL3PolicyConfigEntry ::= SEQUENCE {
ctspIfL3Ipv4PolicyEnabled TruthValue,
ctspIfL3Ipv6PolicyEnabled TruthValue
}
ctspIfL3Ipv4PolicyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the Layer3 Transport
policies will be applied on this interface for egress
IPv4 traffic.
'true' indicates that Layer3 permit and exception policy
will be applied at this interface for egress IPv4 traffic.
'false' indicates that Layer3 permit and exception policy
will not be applied at this interface for egress IPv4
traffic."
::= { ctspIfL3PolicyConfigEntry 1 }
ctspIfL3Ipv6PolicyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the Layer3 Transport
policies will be applied on this interface for egress
IPv6 traffic.
'true' indicates that Layer3 permit and exception policy
will be applied at this interface for egress IPv6 traffic.
'false' indicates that Layer3 permit and exception policy
will not be applied at this interface for egress IPv6
traffic."
::= { ctspIfL3PolicyConfigEntry 2 }
--
-- ctspIpSgtMappingTable
--
ctspIpSgtMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspIpSgtMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IP-to-SGT mapping information
in the device."
::= { ctspIpSgtMappings 1 }
ctspIpSgtMappingEntry OBJECT-TYPE
SYNTAX CtspIpSgtMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the IP-to-SGT mapping and status of
this instance. Entry in this table is either populated
automatically by the device or manually configured by
a user. A manually configured row instance can be created
or removed by setting the appropriate value of its
RowStatus object."
INDEX { ctspIpSgtVrfName,
ctspIpSgtAddressType,
ctspIpSgtIpAddress,
ctspIpSgtAddressLength }
::= { ctspIpSgtMappingTable 1 }
CtspIpSgtMappingEntry ::= SEQUENCE {
ctspIpSgtVrfName CiscoVrfName,
ctspIpSgtAddressType InetAddressType,
ctspIpSgtIpAddress InetAddress,
ctspIpSgtAddressLength InetAddressPrefixLength,
ctspIpSgtValue CtsSecurityGroupTag,
ctspIpSgtSource INTEGER,
ctspIpSgtStorageType StorageType,
ctspIpSgtRowStatus RowStatus
}
ctspIpSgtVrfName OBJECT-TYPE
SYNTAX CiscoVrfName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VRF where IP-SGT mapping
belongs to. The zero length value indicates the default
VRF."
::= { ctspIpSgtMappingEntry 1 }
ctspIpSgtAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of Internet address."
::= { ctspIpSgtMappingEntry 2 }
ctspIpSgtIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an Internet address. The type
of this address is determined by the value of
ctspIpSgtAddressType object."
::= { ctspIpSgtMappingEntry 3 }
ctspIpSgtAddressLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the length of an Internet address
prefix."
::= { ctspIpSgtMappingEntry 4 }
ctspIpSgtValue OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the SGT value assigned to
an Internet address."
::= { ctspIpSgtMappingEntry 5 }
ctspIpSgtSource OBJECT-TYPE
SYNTAX INTEGER {
configured(1),
arp(2),
localAuthenticated(3),
sxp(4),
internal(5),
l3if(6),
vlan(7),
caching(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the source of the mapping.
'configured' indicates that the mapping is manually
configured by user.
'arp' indicates that the mapping is dynamically learnt
from tagged ARP replies.
'localAuthenticated' indicates that the mapping is
dynamically learnt from the device authentication of
a host.
'sxp' indicates that the mapping is dynamically learnt
from SXP (SGT Propagation Protocol).
'internal' indicates that the mapping is automatically
created by the device between the device IP addresses
and the device own SGT.
'l3if' indicates that Interface-SGT mapping is configured
by user.
'vlan' indicates that Vlan-SGT mapping is configured by user.
'cached' indicates that sgt mapping is cached.
Only 'configured' value is accepted when setting this
object."
::= { ctspIpSgtMappingEntry 6 }
ctspIpSgtStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row."
DEFVAL { volatile }
::= { ctspIpSgtMappingEntry 7 }
ctspIpSgtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage the creation and deletion
of rows in this table. If this object value is 'active',
user cannot modify any writable object in this row.
If value of ctspIpSgtSource object in an entry is not
'configured', user cannot change the value of this object."
::= { ctspIpSgtMappingEntry 8 }
--
-- ctsSgtPolicy group
--
ctspAllSgtPolicyAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
refresh(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the action to be taken
with respect to all SGT policies in the device.
When read, this object always returns the value 'none'.
'none' - No operation.
'refresh' - Refresh all SGT policies in the device."
::= { ctspSgtPolicy 1 }
ctspDownloadedSgtPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspDownloadedSgtPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the SGT policy information downloaded
by the device."
::= { ctspSgtPolicy 2 }
ctspDownloadedSgtPolicyEntry OBJECT-TYPE
SYNTAX CtspDownloadedSgtPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the managed objects for SGT policies
downloaded by the device."
INDEX { ctspDownloadedSgtPolicySgt }
::= { ctspDownloadedSgtPolicyTable 1 }
CtspDownloadedSgtPolicyEntry ::= SEQUENCE {
ctspDownloadedSgtPolicySgt CtsSecurityGroupTag,
ctspDownloadedSgtPolicySgtGenId CtsGenerationId,
ctspDownloadedSgtPolicyLifeTime Unsigned32,
ctspDownloadedSgtPolicyLastUpdate DateAndTime,
ctspDownloadedSgtPolicyAction INTEGER
}
ctspDownloadedSgtPolicySgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the SGT value for which
the downloaded policy is applied to. Value of
zero indicates that the SGT is unknown."
::= { ctspDownloadedSgtPolicyEntry 1 }
ctspDownloadedSgtPolicySgtGenId OBJECT-TYPE
SYNTAX CtsGenerationId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the generation identification of
the SGT value denoted by ctspDownloadedSgtPolicySgt object."
::= { ctspDownloadedSgtPolicyEntry 2 }
ctspDownloadedSgtPolicyLifeTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the policy life time which
provides the time interval during which this downloaded
policy is valid."
::= { ctspDownloadedSgtPolicyEntry 3 }
ctspDownloadedSgtPolicyLastUpdate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time when this downloaded
SGT policy is last updated."
::= { ctspDownloadedSgtPolicyEntry 4 }
ctspDownloadedSgtPolicyAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
refresh(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the action to be taken
with this downloaded SGT policy.
When read, this object always returns the value 'none'.
'none' - No operation.
'refresh' - Refresh this SGT policy."
::= { ctspDownloadedSgtPolicyEntry 5 }
--
-- ctspDownloadedDefSgtPolicyTable
--
ctspDownloadedDefSgtPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspDownloadedDefSgtPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the default SGT policy information
downloaded by the device."
::= { ctspSgtPolicy 3 }
ctspDownloadedDefSgtPolicyEntry OBJECT-TYPE
SYNTAX CtspDownloadedDefSgtPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the managed objects for default SGT
policies downloaded by the device."
INDEX { ctspDownloadedDefSgtPolicyType }
::= { ctspDownloadedDefSgtPolicyTable 1 }
CtspDownloadedDefSgtPolicyEntry ::= SEQUENCE {
ctspDownloadedDefSgtPolicyType INTEGER,
ctspDownloadedDefSgtPolicySgtGenId CtsGenerationId,
ctspDownloadedDefSgtPolicyLifeTime Unsigned32,
ctspDownloadedDefSgtPolicyLastUpdate DateAndTime,
ctspDownloadedDefSgtPolicyAction INTEGER
}
ctspDownloadedDefSgtPolicyType OBJECT-TYPE
SYNTAX INTEGER { unicastDefault(1) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the downloaded default SGT
policy type.
'unicastDefault' indicates the SGT policy applied to
traffic which carries the default unicast SGT."
::= { ctspDownloadedDefSgtPolicyEntry 1 }
ctspDownloadedDefSgtPolicySgtGenId OBJECT-TYPE
SYNTAX CtsGenerationId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the generation identification of
the downloaded default SGT policy."
::= { ctspDownloadedDefSgtPolicyEntry 2 }
ctspDownloadedDefSgtPolicyLifeTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the policy life time which
provides the time interval during which this
download default policy is valid."
::= { ctspDownloadedDefSgtPolicyEntry 3 }
ctspDownloadedDefSgtPolicyLastUpdate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time when this downloaded
SGT policy is last updated."
::= { ctspDownloadedDefSgtPolicyEntry 4 }
ctspDownloadedDefSgtPolicyAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
refresh(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the action to be taken
with this default downloaded SGT policy.
When read, this object always returns the value 'none'.
'none' - No operation.
'refresh' - Refresh this default SGT policy."
::= { ctspDownloadedDefSgtPolicyEntry 5 }
--
-- ctspIfSgtMappingTable
--
ctspIfSgtMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspIfSgtMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the Interface-to-SGT mapping configuration
information in the device."
::= { ctspIfSgtMappings 1 }
ctspIfSgtMappingEntry OBJECT-TYPE
SYNTAX CtspIfSgtMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the SGT mapping configuration of a particular
interface.
A row instance can be created or removed by setting
ctspIfSgtRowStatus."
INDEX { ifIndex }
::= { ctspIfSgtMappingTable 1 }
CtspIfSgtMappingEntry ::= SEQUENCE {
ctspIfSgtValue CtsSecurityGroupTag,
ctspIfSgName SnmpAdminString,
ctspIfSgtStorageType StorageType,
ctspIfSgtRowStatus RowStatus
}
ctspIfSgtValue OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the SGT value assigned to the interface."
::= { ctspIfSgtMappingEntry 1 }
ctspIfSgName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the Security Group Name assigned to
the interface."
::= { ctspIfSgtMappingEntry 2 }
ctspIfSgtStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row."
DEFVAL { volatile }
::= { ctspIfSgtMappingEntry 3 }
ctspIfSgtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage the creation and deletion
of rows in this table."
::= { ctspIfSgtMappingEntry 4 }
--
-- ctspIfSgtMappingInfoTable
--
ctspIfSgtMappingInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspIfSgtMappingInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the Interface-to-SGT mapping status
information in the device."
::= { ctspIfSgtMappings 2 }
ctspIfSgtMappingInfoEntry OBJECT-TYPE
SYNTAX CtspIfSgtMappingInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Containing the Interface-to-SGT mapping status of the
specified interface."
INDEX { ifIndex }
::= { ctspIfSgtMappingInfoTable 1 }
CtspIfSgtMappingInfoEntry ::= SEQUENCE {
ctspL3IPMStatus INTEGER
}
ctspL3IPMStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
active(2),
inactive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Layer 3 Identity Port Mapping(IPM)
operational mode.
disabled - The L3 IPM is not configured.
active - The L3 IPM is configured for this interface, and
SGT is available.
inactive - The L3 IPM is configured for this interface, and
SGT is unavailable."
::= { ctspIfSgtMappingInfoEntry 1 }
--
-- ctspVlanSgtMappingTable
--
ctspVlanSgtMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtspVlanSgtMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the Vlan-SGT mapping information
in the device."
::= { ctspVlanSgtMappings 1 }
ctspVlanSgtMappingEntry OBJECT-TYPE
SYNTAX CtspVlanSgtMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains the SGT mapping configuration of a particular
VLAN.
A row instance can be created or removed by setting
ctspVlanSgtRowStatus."
INDEX { ctspVlanSgtMappingIndex }
::= { ctspVlanSgtMappingTable 1 }
CtspVlanSgtMappingEntry ::= SEQUENCE {
ctspVlanSgtMappingIndex VlanIndex,
ctspVlanSgtMapValue CtsSecurityGroupTag,
ctspVlanSgtStorageType StorageType,
ctspVlanSgtRowStatus RowStatus
}
ctspVlanSgtMappingIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the VLAN-ID which is used as index."
::= { ctspVlanSgtMappingEntry 1 }
ctspVlanSgtMapValue OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the SGT value assigned to the vlan."
::= { ctspVlanSgtMappingEntry 2 }
ctspVlanSgtStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row."
DEFVAL { volatile }
::= { ctspVlanSgtMappingEntry 3 }
ctspVlanSgtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage the creation and deletion
of rows in this table."
::= { ctspVlanSgtMappingEntry 4 }
--
-- ctsSgtCaching group
--
ctspSgtCachingMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
standAlone(2),
withEnforcement(3),
vlan(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies which SGT-caching mode is configured
for SGT caching capable interfaces at the managed system.
'none' indicates that sgt-caching for all Layer 3
interfaces (excluding SVIs) is disabled.
'standAlone' indicates that SGT-caching is enabled on
every TrustSec capable Layer3 interface (excluding SVIs)
in the device.
'withEnforcement' indicates that SGT-caching is enabled on
interfaces that have RBAC enforcement enabled.
'vlan' indicates that SGT-caching is enabled on
the VLANs specified by ctspSgtCachingVlansfFirst2K &
ctspSgtCachingVlansSecond2K"
::= { ctspSgtCaching 1 }
ctspSgtCachingVlansFirst2K OBJECT-TYPE
SYNTAX Cisco2KVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANs 0 to
2047.
If the bit corresponding to a VLAN is set to 1, it indicates
SGT-caching is enabled on the VLAN.
If the bit corresponding to a VLAN is set to 0, it indicates
SGT-caching is disabled on the VLAN."
::= { ctspSgtCaching 2 }
ctspSgtCachingVlansSecond2K OBJECT-TYPE
SYNTAX Cisco2KVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANs 2048
to 4095.
If the bit corresponding to a VLAN is set to 1, it indicates
SGT-caching is enabled on the VLAN.
If the bit corresponding to a VLAN is set to 0, it indicates
SGT-caching is disabled on the VLAN."
::= { ctspSgtCaching 3 }
-- Notifications Control
ctspPeerPolicyUpdatedNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system generates
ctspPeerPolicyUpdatedNotif.
A value of 'false' will prevent
ctspPeerPolicyUpdatedNotif notifications
from being generated by this system."
::= { ctspNotifsControl 1 }
ctspAuthorizationSgaclFailNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this system generates the
ctspAuthorizationSgaclFailNotif.
A value of 'false' will prevent
ctspAuthorizationSgaclFailNotif notifications
from being generated by this system."
::= { ctspNotifsControl 2 }
-- Notifications Only Info
ctspOldPeerSgt OBJECT-TYPE
SYNTAX CtsSecurityGroupTag
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object provides the old sgt value for
ctspPeerPolicyUpdatedNotif, i.e., the
sgt value before the policy is updated."
::= { ctspNotifsOnlyInfo 1 }
ctspAuthorizationSgaclFailReason OBJECT-TYPE
SYNTAX INTEGER {
downloadACE(1),
downloadSrc(2),
downloadDst(3),
installPolicy(4),
installPolicyStandby(5),
installForIP(6),
uninstall(7)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the reason of failure during SGACL
acquisitions, installations and uninstallations, which is
associated with ctspAuthorizationSgaclFailNotif;
'downloadACE'
- Failure during downloading ACE in SGACL acquisition.
'downloadSrc'
- Failure during downloading source list in SGACL acquisition.
'downloadDst'
- Failure during downloading destination list in
SGACL acquisition.
'installPolicy'
- Failure during SGACL policy installation
'installPolicyStandby'
- Failure during SGACL policy installation on standby
'installForIP'
- Failure during SGACL installation for specific IP type.
'uninstall' - Failure during SGACL uninstallation."
::= { ctspNotifsOnlyInfo 2 }
ctspAuthorizationSgaclFailInfo OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object provides additional information about
authorization SGACL failure, which is associated with
ctspAuthorizationSgaclFailNotif."
::= { ctspNotifsOnlyInfo 3 }
-- Notifications
ctspPeerPolicyUpdatedNotif NOTIFICATION-TYPE
OBJECTS {
ctspOldPeerSgt,
ctspPeerSgt
}
STATUS current
DESCRIPTION
"A ctspPeerPolicyUpdatedNotif is generated when
the SGT value of a peer device has been updated."
::= { ciscoTrustSecPolicyMIBNotifs 1 }
ctspAuthorizationSgaclFailNotif NOTIFICATION-TYPE
OBJECTS {
ctspAuthorizationSgaclFailReason,
ctspAuthorizationSgaclFailInfo
}
STATUS current
DESCRIPTION
"A ctspAuthorizationSgaclFailNotif is generated
when the authorization of SGACL fails."
::= { ciscoTrustSecPolicyMIBNotifs 2 }
--
-- Conformance
--
ciscoTrustSecPolicyMIBCompliances
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBConformance 1 }
ciscoTrustSecPolicyMIBGroups
OBJECT IDENTIFIER ::= { ciscoTrustSecPolicyMIBConformance 2 }
ciscoTrustSecPolicyMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the CISCO-TRUSTSEC-POLICY-MIB"
MODULE
MANDATORY-GROUPS {
ctspGlobalSgaclEnforcementGroup,
ctspOperSgaclMappingGroup,
ctspDownloadedSgaclMappingGroup,
ctspIpSwStatisticsGroup,
ctspDefSwStatisticsGroup
}
GROUP ctspVlanConfigGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGACL enforcement for VLAN."
GROUP ctspConfigSgaclMappingGroup
DESCRIPTION
"This group is mandatory only for platforms which support
statically configured SGACLs in the device."
GROUP ctspIpHwStatisticsGroup
DESCRIPTION
"This group is mandatory only for platforms which support
hardware statistics counters for unicast IP traffic
subjected to SGACL enforcement."
GROUP ctspDefHwStatisticsGroup
DESCRIPTION
"This group is mandatory only for platforms which support
hardware statistics counters for unicast IP traffic
subjected to default unicast policy enforcement."
GROUP ctspSgaclIpv4DropNetflowMonitorGroup
DESCRIPTION
"This group is mandatory only for platforms which support
netflow monitor for IPv4 traffic drop packet due to SGACL
enforcement information in the device."
GROUP ctspSgaclIpv6DropNetflowMonitorGroup
DESCRIPTION
"This group is mandatory only for platforms which support
netflow monitor for IPv6 traffic drop packet due to SGACL
enforcement information in the device."
GROUP ctspPeerPolicyGroup
DESCRIPTION
"This group is mandatory only for platforms which support
peer policies information in the device."
GROUP ctspPeerPolicyActionGroup
DESCRIPTION
"This group is mandatory only for platforms which support
refresh of all peer policies information in the device."
GROUP ctspLayer3TransportGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGT propagation along Layer 3 traffic to network that is
not capable of TrustSec feature."
GROUP ctspIpSgtMappingGroup
DESCRIPTION
"This group is mandatory only for platforms which support
IP-to-SGT mapping information."
GROUP ctspIfL3PolicyConfigGroup
DESCRIPTION
"This group is mandatory only for platforms which support
Layer3 Transport policy enforcement on capable interface."
GROUP ctspSgtPolicyGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGT policies information in the device."
OBJECT ctspVlanConfigSgaclEnforcement
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspVlanConfigVrfName
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspVlanConfigStorageType
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspVlanConfigRowStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Support for 'createAndWait' is not required."
OBJECT ctspConfigSgaclMappingStorageType
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspConfigSgaclMappingRowStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Support for 'createAndWait' is not required."
OBJECT ctspSgaclEnforcementEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspSgaclIpv4DropNetflowMonitor
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspSgaclIpv6DropNetflowMonitor
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspConfigSgaclMappingSgaclName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDefConfigIpv4Sgacls
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDefConfigIpv6Sgacls
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspLayer3PolicyLocalConfig
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIpSgtStorageType
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspIpSgtRowStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Support for 'createAndWait' is not required."
OBJECT ctspIpSgtValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIpSgtSource
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIfL3Ipv4PolicyEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIfL3Ipv6PolicyEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspAllPeerPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspPeerPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspAllSgtPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDownloadedSgtPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDownloadedDefSgtPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoTrustSecPolicyMIBCompliances 1 }
ciscoTrustSecPolicyMIBComplianceRev2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the CISCO-TRUSTSEC-POLICY-MIB"
MODULE
MANDATORY-GROUPS {
ctspGlobalSgaclEnforcementGroup,
ctspOperSgaclMappingGroup,
ctspDownloadedSgaclMappingGroup,
ctspIpSwStatisticsGroup,
ctspDefSwStatisticsGroup
}
GROUP ctspVlanConfigGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGACL enforcement for VLAN."
GROUP ctspConfigSgaclMappingGroup
DESCRIPTION
"This group is mandatory only for platforms which support
statically configured SGACLs in the device."
GROUP ctspIpHwStatisticsGroup
DESCRIPTION
"This group is mandatory only for platforms which support
hardware statistics counters for unicast IP traffic
subjected to SGACL enforcement."
GROUP ctspDefHwStatisticsGroup
DESCRIPTION
"This group is mandatory only for platforms which support
hardware statistics counters for unicast IP traffic
subjected to default unicast policy enforcement."
GROUP ctspSgaclIpv4DropNetflowMonitorGroup
DESCRIPTION
"This group is mandatory only for platforms which support
netflow monitor for IPv4 traffic drop packet due to SGACL
enforcement information in the device."
GROUP ctspSgaclIpv6DropNetflowMonitorGroup
DESCRIPTION
"This group is mandatory only for platforms which support
netflow monitor for IPv6 traffic drop packet due to SGACL
enforcement information in the device."
GROUP ctspPeerPolicyGroup
DESCRIPTION
"This group is mandatory only for platforms which support
peer policies information in the device."
GROUP ctspPeerPolicyActionGroup
DESCRIPTION
"This group is mandatory only for platforms which support
refresh of all peer policies information in the device."
GROUP ctspLayer3TransportGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGT propagation along Layer 3 traffic to network that is
not capable of TrustSec feature."
GROUP ctspIpSgtMappingGroup
DESCRIPTION
"This group is mandatory only for platforms which support
IP-to-SGT mapping information."
GROUP ctspIfL3PolicyConfigGroup
DESCRIPTION
"This group is mandatory only for platforms which support
Layer3 Transport policy enforcement on capable interface."
GROUP ctspSgtPolicyGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGT policies information in the device."
GROUP ctspIfSgtMappingGroup
DESCRIPTION
"This group is mandatory only for platforms which support
Interface-to-SGT mapping information."
GROUP ctspVlanSgtMappingGroup
DESCRIPTION
"This group is mandatory only for platforms which support
Vlan-to-SGT mapping information."
GROUP ctspSgtCachingGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGT-Caching feature."
GROUP ctspSgaclMonitorGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGACL monitor feature."
GROUP ctspSgaclMonitorStatisticGroup
DESCRIPTION
"This group is mandatory only for platforms which support
SGACL monitor statistic."
GROUP ctspNotifCtrlGroup
DESCRIPTION
"This group is mandatory only for platforms which support
cisco TrustSec policy notifications."
GROUP ctspNotifGroup
DESCRIPTION
"This group is mandatory only for platforms which support
cisco TrustSec policy notifications."
GROUP ctspNotifInfoGroup
DESCRIPTION
"This group is mandatory only for platforms which support
cisco TrustSec policy notifications."
OBJECT ctspVlanConfigSgaclEnforcement
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspVlanConfigVrfName
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspVlanConfigStorageType
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspVlanConfigRowStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Support for 'createAndWait' is not required."
OBJECT ctspConfigSgaclMappingStorageType
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspConfigSgaclMappingRowStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Support for 'createAndWait' is not required."
OBJECT ctspSgaclEnforcementEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspSgaclIpv4DropNetflowMonitor
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspSgaclIpv6DropNetflowMonitor
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspConfigSgaclMappingSgaclName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDefConfigIpv4Sgacls
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDefConfigIpv6Sgacls
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspLayer3PolicyLocalConfig
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIpSgtStorageType
MIN-ACCESS read-only
DESCRIPTION
"Support for read-create access is not required."
OBJECT ctspIpSgtRowStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Support for 'createAndWait' is not required."
OBJECT ctspIpSgtValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIpSgtSource
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIfL3Ipv4PolicyEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIfL3Ipv6PolicyEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspAllPeerPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspPeerPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspAllSgtPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDownloadedSgtPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDownloadedDefSgtPolicyAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDefConfigIpv4SgaclsMonitor
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspDefConfigIpv6SgaclsMonitor
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspSgaclMonitorEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIfSgtValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIfSgName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspIfSgtStorageType
MIN-ACCESS read-only
DESCRIPTION
"Read-create access is not required."
OBJECT ctspIfSgtRowStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Read-create access is not required."
OBJECT ctspVlanSgtMapValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspVlanSgtStorageType
MIN-ACCESS read-only
DESCRIPTION
"Read-create access is not required."
OBJECT ctspVlanSgtRowStatus
SYNTAX INTEGER { active(1) }
WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"Read-create access is not required."
OBJECT ctspConfigSgaclMonitor
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspSgtCachingMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspSgtCachingVlansFirst2K
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspSgtCachingVlansSecond2K
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspPeerPolicyUpdatedNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ctspAuthorizationSgaclFailNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoTrustSecPolicyMIBCompliances 2 }
--
-- Units of Conformance
--
ctspGlobalSgaclEnforcementGroup OBJECT-GROUP
OBJECTS {
ctspSgaclEnforcementEnable
}
STATUS current
DESCRIPTION
"A collection of object which provides the SGACL enforcement
information for all TrustSec capable Layer 3 interfaces
(excluding SVIs) at the device level."
::= { ciscoTrustSecPolicyMIBGroups 1 }
ctspSgaclIpv4DropNetflowMonitorGroup OBJECT-GROUP
OBJECTS {
ctspSgaclIpv4DropNetflowMonitor
}
STATUS current
DESCRIPTION
"A collection of object which provides netflow monitor
information for IPv4 traffic drop packet due to SGACL
enforcement in the device."
::= { ciscoTrustSecPolicyMIBGroups 2 }
ctspSgaclIpv6DropNetflowMonitorGroup OBJECT-GROUP
OBJECTS {
ctspSgaclIpv6DropNetflowMonitor
}
STATUS current
DESCRIPTION
"A collection of object which provides netflow monitor
information for IPv6 traffic drop packet due to SGACL
enforcement in the device."
::= { ciscoTrustSecPolicyMIBGroups 3 }
ctspVlanConfigGroup OBJECT-GROUP
OBJECTS {
ctspVlanConfigSgaclEnforcement,
ctspVlanSviActive,
ctspVlanConfigVrfName,
ctspVlanConfigStorageType,
ctspVlanConfigRowStatus
}
STATUS current
DESCRIPTION
"A collection of object which provides the SGACL enforcement
and VRF information for each VLAN."
::= { ciscoTrustSecPolicyMIBGroups 4 }
ctspConfigSgaclMappingGroup OBJECT-GROUP
OBJECTS {
ctspConfigSgaclMappingSgaclName,
ctspConfigSgaclMappingStorageType,
ctspConfigSgaclMappingRowStatus,
ctspDefConfigIpv4Sgacls,
ctspDefConfigIpv6Sgacls
}
STATUS current
DESCRIPTION
"A collection of objects which provides the administratively
configured SGACL mapping information in the device."
::= { ciscoTrustSecPolicyMIBGroups 5 }
ctspDownloadedSgaclMappingGroup OBJECT-GROUP
OBJECTS {
ctspDownloadedSgaclName,
ctspDownloadedSgaclGenId,
ctspDownloadedIpTrafficType,
ctspDefDownloadedSgaclName,
ctspDefDownloadedSgaclGenId,
ctspDefDownloadedIpTrafficType
}
STATUS current
DESCRIPTION
"A collection of objects which provides the downloaded
SGACL mapping information in the device."
::= { ciscoTrustSecPolicyMIBGroups 6 }
ctspOperSgaclMappingGroup OBJECT-GROUP
OBJECTS {
ctspOperationalSgaclName,
ctspOperationalSgaclGenId,
ctspOperSgaclMappingSource,
ctspOperSgaclConfigSource,
ctspDefOperationalSgaclName,
ctspDefOperationalSgaclGenId,
ctspDefOperSgaclMappingSource,
ctspDefOperSgaclConfigSource
}
STATUS current
DESCRIPTION
"A collection of objects which provides the operational
SGACL mapping information in the device."
::= { ciscoTrustSecPolicyMIBGroups 7 }
ctspIpSwStatisticsGroup OBJECT-GROUP
OBJECTS {
ctspStatsIpSwDropPkts,
ctspStatsIpSwPermitPkts
}
STATUS current
DESCRIPTION
"A collection of objects which provides software
statistics counters for unicast IP traffic subjected
to SGACL enforcement."
::= { ciscoTrustSecPolicyMIBGroups 8 }
ctspIpHwStatisticsGroup OBJECT-GROUP
OBJECTS {
ctspStatsIpHwDropPkts,
ctspStatsIpHwPermitPkts
}
STATUS current
DESCRIPTION
"A collection of objects which provides hardware
statistics counters for unicast IP traffic subjected
to SGACL enforcement."
::= { ciscoTrustSecPolicyMIBGroups 9 }
ctspDefSwStatisticsGroup OBJECT-GROUP
OBJECTS {
ctspDefIpSwDropPkts,
ctspDefIpSwPermitPkts
}
STATUS current
DESCRIPTION
"A collection of objects which provides software
statistics counters for unicast IP traffic subjected
to unicast default policy enforcement."
::= { ciscoTrustSecPolicyMIBGroups 10 }
ctspDefHwStatisticsGroup OBJECT-GROUP
OBJECTS {
ctspDefIpHwDropPkts,
ctspDefIpHwPermitPkts
}
STATUS current
DESCRIPTION
"A collection of objects which provides hardware
statistics counters for unicast IP traffic subjected to
unicast default policy enforcement."
::= { ciscoTrustSecPolicyMIBGroups 11 }
ctspPeerPolicyActionGroup OBJECT-GROUP
OBJECTS {
ctspAllPeerPolicyAction
}
STATUS current
DESCRIPTION
"A collection of object which provides refreshing
of all peer policies in the device."
::= { ciscoTrustSecPolicyMIBGroups 12 }
ctspPeerPolicyGroup OBJECT-GROUP
OBJECTS {
ctspPeerSgt,
ctspPeerSgtGenId,
ctspPeerTrustState,
ctspPeerPolicyLifeTime,
ctspPeerPolicyLastUpdate,
ctspPeerPolicyAction
}
STATUS current
DESCRIPTION
"A collection of object which provides peer policy
information in the device."
::= { ciscoTrustSecPolicyMIBGroups 13 }
ctspLayer3TransportGroup OBJECT-GROUP
OBJECTS {
ctspLayer3PolicyLocalConfig,
ctspLayer3PolicyDownloaded,
ctspLayer3PolicyOperational
}
STATUS current
DESCRIPTION
"A collection of objects which provides managed
information regarding the SGT propagation along with
Layer 3 traffic in the device."
::= { ciscoTrustSecPolicyMIBGroups 14 }
ctspIfL3PolicyConfigGroup OBJECT-GROUP
OBJECTS {
ctspIfL3Ipv4PolicyEnabled,
ctspIfL3Ipv6PolicyEnabled
}
STATUS current
DESCRIPTION
"A collection of objects which provides managed
information for Layer3 Tranport policy enforcement on
capable interface in the device."
::= { ciscoTrustSecPolicyMIBGroups 15 }
ctspIpSgtMappingGroup OBJECT-GROUP
OBJECTS {
ctspIpSgtValue,
ctspIpSgtSource,
ctspIpSgtStorageType,
ctspIpSgtRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects which provides managed
information regarding IP-to-Sgt mapping in the device."
::= { ciscoTrustSecPolicyMIBGroups 16 }
ctspSgtPolicyGroup OBJECT-GROUP
OBJECTS {
ctspAllSgtPolicyAction,
ctspDownloadedSgtPolicySgtGenId,
ctspDownloadedSgtPolicyLifeTime,
ctspDownloadedSgtPolicyLastUpdate,
ctspDownloadedSgtPolicyAction,
ctspDownloadedDefSgtPolicySgtGenId,
ctspDownloadedDefSgtPolicyLifeTime,
ctspDownloadedDefSgtPolicyLastUpdate,
ctspDownloadedDefSgtPolicyAction
}
STATUS current
DESCRIPTION
"A collection of object which provides SGT policy
information in the device."
::= { ciscoTrustSecPolicyMIBGroups 17 }
ctspIfSgtMappingGroup OBJECT-GROUP
OBJECTS {
ctspIfSgtValue,
ctspIfSgName,
ctspL3IPMStatus,
ctspIfSgtStorageType,
ctspIfSgtRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects which provides managed
information regarding Interface-to-Sgt mapping in
the device."
::= { ciscoTrustSecPolicyMIBGroups 18 }
ctspVlanSgtMappingGroup OBJECT-GROUP
OBJECTS {
ctspVlanSgtMapValue,
ctspVlanSgtStorageType,
ctspVlanSgtRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects which provides sgt mapping
information for the IP traffic in the specified Vlan."
::= { ciscoTrustSecPolicyMIBGroups 19 }
ctspSgtCachingGroup OBJECT-GROUP
OBJECTS {
ctspSgtCachingMode,
ctspSgtCachingVlansFirst2K,
ctspSgtCachingVlansSecond2K
}
STATUS current
DESCRIPTION
"A collection of objects which provides sgt Caching
information."
::= { ciscoTrustSecPolicyMIBGroups 20 }
ctspSgaclMonitorGroup OBJECT-GROUP
OBJECTS {
ctspSgaclMonitorEnable,
ctspConfigSgaclMonitor,
ctspDefConfigIpv4SgaclsMonitor,
ctspDefConfigIpv6SgaclsMonitor,
ctspDownloadedSgaclMonitor,
ctspDefDownloadedSgaclMonitor,
ctspOperSgaclMonitor,
ctspDefOperSgaclMonitor
}
STATUS current
DESCRIPTION
"A collection of objects which provides SGACL monitor
information."
::= { ciscoTrustSecPolicyMIBGroups 21 }
ctspSgaclMonitorStatisticGroup OBJECT-GROUP
OBJECTS {
ctspStatsIpSwMonitorPkts,
ctspStatsIpHwMonitorPkts,
ctspDefIpSwMonitorPkts,
ctspDefIpHwMonitorPkts
}
STATUS current
DESCRIPTION
"A collection of objects which provides monitor statistics
counters for unicast IP traffic subjected to SGACL
enforcement."
::= { ciscoTrustSecPolicyMIBGroups 22 }
ctspNotifCtrlGroup OBJECT-GROUP
OBJECTS {
ctspPeerPolicyUpdatedNotifEnable,
ctspAuthorizationSgaclFailNotifEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing notification control
for TrustSec policy notifications."
::= { ciscoTrustSecPolicyMIBGroups 23 }
ctspNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ctspPeerPolicyUpdatedNotif,
ctspAuthorizationSgaclFailNotif
}
STATUS current
DESCRIPTION
"A collection of notifications for TrustSec policy."
::= { ciscoTrustSecPolicyMIBGroups 24 }
ctspNotifInfoGroup OBJECT-GROUP
OBJECTS {
ctspOldPeerSgt,
ctspAuthorizationSgaclFailReason,
ctspAuthorizationSgaclFailInfo
}
STATUS current
DESCRIPTION
"A collection of objects providing the variable binding for
TrustSec policy notifications."
::= { ciscoTrustSecPolicyMIBGroups 25 }
END
View Git Blame Copy Permalink