Observium_CE/mibs/cisco/CISCO-LWAPP-DHCP-MIB

813 lines
29 KiB
Plaintext

-- *******************************************************************
-- CISCO-LWAPP-DHCP-MIB.my :
-- Light Weight Access Point Dynamic Host Configuration Protocol MIB
-- June 2007, Gayathri Velayutham
--
-- Copyright (c) 2012, 2013, 2017 by Cisco Systems Inc.
-- All rights reserved.
-- *******************************************************************
CISCO-LWAPP-DHCP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
IpAddress,
Unsigned32,
Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue,
TimeStamp
FROM SNMPv2-TC
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
CiscoURLString
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
-- ********************************************************************
-- * MODULE IDENTITY
-- ********************************************************************
ciscoLwappDhcpMIB MODULE-IDENTITY
LAST-UPDATED "201704270000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is used to manage Dynamic Host Configuration
Protocol (DHCP) related information on the devices
operating as Central controllers, that terminate the
Light Weight Access Point Protocol tunnel from Cisco
Light-weight LWAPP Access Points.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node,
Mobile Station(MS) and client are used interchangeably.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol"
REVISION "201704270000Z"
DESCRIPTION
"Updated the description of various objects."
REVISION "201201310000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 792 }
ciscoLwappDhcpMIBNotif OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIB 0 }
ciscoLwappDhcpMIBObjects OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIB 1 }
ciscoLwappDhcpMIBConform OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIB 2 }
ciscoLwappDhcpGlobalConfig OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIBObjects 1 }
ciscoLwappDhcpStatsConfig OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIBObjects 2 }
ciscoLwappDhcpStats OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIBObjects 3 }
ciscoLwappDhcpScopeStats OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIBObjects 4 }
ciscoLwappDhcpMIBNotifObjects OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIBObjects 5 }
-- *************************************************
-- DHCP Global Config
-- *************************************************
cLDhcpClearAllStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the statistics of the DHCP servers
is cleared or not.
A 'true' value clears all the statistics of all the DHCP
servers.
A 'false' value specifies that statistics of all the DHCP
servers has not been cleared."
DEFVAL { false }
::= { ciscoLwappDhcpGlobalConfig 1 }
cLDhcpOpt82RemoteIdFormat OBJECT-TYPE
SYNTAX INTEGER {
apMac(1),
apMacSsid(2),
apEthMac (3),
apNameSsid (4),
apGroupName (5),
flexGroupName (6),
apLocation (7),
apMacVlanId (8),
apNameVlanId (9),
apEthMacSsid (10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the format for RemoteId field
in DHCP option 82 of the controller.
apMac (1) - The DHCP Option 82 RemoteID format is set to
ap-mac.
apMacSsid(2) - The DHCP Option 82 RemoteID format is set
to apmac::SSID.
apEthMac(3) - The DHCP Option 82 RemoteId format is set to
AP ethernet Mac address.
apNameSsid(4) - The DHCP Option 82 RemoteID format is set
to AP name - SSID.
apGroupName(5) - The DHCP Option 82 RemoteID format is set
to AP group Name.
flexGroupName(6) - The DHCP Option 82 RemoteID format is
set to flex group Name.
apLocation(7) - The DHCP Option 82 RemoteID format is set
to AP location.
apMacVlanId(8) - The DHCP Option 82 RemoteID format is set
to AP Mac vlan id.
apNameVlanId(9) - The DHCP Option 82 RemoteID format is
set to AP Name vlan id.
apEthMacSsid(10) - The DHCP Option 82 RemoteID format is
set to AP ethernet MAC SSID. "
DEFVAL { apMac }
::= { ciscoLwappDhcpGlobalConfig 2 }
cLDhcpClearAllDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the value of sysUpTime on the most
recent occasion at which any one or more of this DHCP
server counters suffered a discontinuity. If no such
discontinuities have occurred since the last
re-initialization of the local management subsystem,
then this object contains a zero value."
::= { ciscoLwappDhcpGlobalConfig 3 }
cLDhcpTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time to wait for
DHCP address assignment once the user associates."
::= { ciscoLwappDhcpGlobalConfig 4 }
cLDhcpOpt37RemoteIdFormat OBJECT-TYPE
SYNTAX INTEGER {
apMac (1),
apMacSsid (2),
apEthMac (3),
apNameSsid (4),
apGroupName (5),
flexGroupName (6),
apLocation (7),
apMacVlanId (8),
apNameVlanId (9),
apEthMacSsid (10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is specific to DHCP IPV6 and it
specifies the format for RemoteId field
in DHCP option 37 of the controller.
apMac (1) - The DHCP Option 37 RemoteID format
is set to ap-mac.
apMacSsid(2) - The DHCP Option 37 RemoteID format is set
to apmac::SSID.
apEthMac(3) - The DHCP Option 37 RemoteId format is set to
AP ethernet MAC address.
apNameSsid(4) - The DHCP Option 37 RemoteID format is set
to AP name - SSID.
apGroupName(5) - The DHCP Option 37 RemoteID format is set
to AP group Name.
flexGroupName(6) - The DHCP Option 37 RemoteID format is
set to flex group name.
apLocation(7) - The DHCP Option 37 RemoteID format is set
to AP location.
apMacVlanId(8) - The DHCP Option 37 RemoteID format is set
to AP MAC vlan id.
apNameVlanId(9) - The DHCP Option 37 RemoteID format is
set to AP Name vlan id.
apEthMacSsid(10) - The DHCP Option 37 RemoteID format is
set to AP ethernet MAC SSID."
DEFVAL {apMac}
::= { ciscoLwappDhcpGlobalConfig 5 }
cLDhcpStatsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLDhcpStatsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configurable attributes for
statistics of the DHCP servers, uniquely identified by IP
address.When DHCP server is configured for an interface or
WLAN, the stats table will automatically get populated."
::= { ciscoLwappDhcpStatsConfig 1 }
cLDhcpStatsConfigEntry OBJECT-TYPE
SYNTAX CLDhcpStatsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a DHCP server uniquely
identified by the IP address. An entry gets added to
the table on configuring a DHCP server IP address and
deleted from the table when the address is deleted."
INDEX {
cLDhcpServerInetAddressType,
cLDhcpServerInetAddress
}
::= { cLDhcpStatsConfigTable 1 }
CLDhcpStatsConfigEntry ::= SEQUENCE {
cLDhcpServerInetAddressType InetAddressType,
cLDhcpServerInetAddress InetAddress,
cLDhcpClearStats TruthValue,
cLDhcpClearDiscontinuityTime TimeStamp
}
cLDhcpServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the type of IP address of the
DHCP server."
::= { cLDhcpStatsConfigEntry 1 }
cLDhcpServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the IP address of the
DHCP server."
::= { cLDhcpStatsConfigEntry 2 }
cLDhcpClearStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the statistics of the DHCP server
represented by the unique IP address is cleared or not.
A 'true' value clears the statistics of the DHCP server
represented by the unique IP address.
A 'false' value specifies that statistics of the DHCP
server represented by the unique IP address is not
cleared."
DEFVAL {false}
::= { cLDhcpStatsConfigEntry 3 }
cLDhcpClearDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the value of sysUpTime on the most
recent occasion at which this particular DHCP server
counter suffered a discontinuity. If no such
discontinuities have occurred since the last
re-initialization of the local management subsystem, then
this object contains a zero value."
::= { cLDhcpStatsConfigEntry 4 }
cLDhcpStatsShowTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLDhcpStatsShowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains various statistics of the DHCP servers,
uniquely identified by IP address.When DHCP server is
configured for an interface or WLAN, the stats table will
automatically get populated."
::= { ciscoLwappDhcpStats 1 }
cLDhcpStatsShowEntry OBJECT-TYPE
SYNTAX CLDhcpStatsShowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a DHCP server uniquely identified
by the IP address."
INDEX {
cLDhcpServerInetAddressType,
cLDhcpServerInetAddress
}
::= { cLDhcpStatsShowTable 1 }
CLDhcpStatsShowEntry ::= SEQUENCE {
cLDhcpProxy TruthValue,
cLDhcpDiscoverPackets Counter32,
cLDhcpRequestPackets Counter32,
cLDhcpDeclinePackets Counter32,
cLDhcpInformPackets Counter32,
cLDhcpReleasePackets Counter32,
cLDhcpReplyPackets Counter32,
cLDhcpOfferPackets Counter32,
cLDhcpAckPackets Counter32,
cLDhcpNakPackets Counter32,
cLDhcpTxFailures Counter32,
cLDhcpLastResponseTime TimeStamp,
cLDhcpLastRequestTime TimeStamp,
cLDhcpRxDiscoverPackets Counter32
}
cLDhcpProxy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the proxy cLDhcpProxy is
enabled or disabled.
A 'true' value indicates that the cLDhcpProxy is enabled.
A 'false' value indicates that the cLDhcpProxy is disabled
."
::= { cLDhcpStatsShowEntry 1 }
cLDhcpDiscoverPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP discover
packets sent by the controller."
::= { cLDhcpStatsShowEntry 2 }
cLDhcpRequestPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP request packets
sent by the controller."
::= { cLDhcpStatsShowEntry 3 }
cLDhcpDeclinePackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP decline packets
received by the controller."
::= { cLDhcpStatsShowEntry 4 }
cLDhcpInformPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP inform packets
sent by the controller."
::= { cLDhcpStatsShowEntry 5 }
cLDhcpReleasePackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP release packets
sent by the controller."
::= { cLDhcpStatsShowEntry 6 }
cLDhcpReplyPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP reply packets
received by the controller."
::= { cLDhcpStatsShowEntry 7 }
cLDhcpOfferPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP offer packets
received by the controller."
::= { cLDhcpStatsShowEntry 8 }
cLDhcpAckPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of Ack packets
sent by the controller."
::= { cLDhcpStatsShowEntry 9 }
cLDhcpNakPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of Nak packets
sent by the controller."
::= { cLDhcpStatsShowEntry 10 }
cLDhcpTxFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of transmission
failures received by the controller."
::= { cLDhcpStatsShowEntry 11 }
cLDhcpLastResponseTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time at which the last
DHCP response was received by the controller."
::= { cLDhcpStatsShowEntry 12 }
cLDhcpLastRequestTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time at which the last
DHCP request was sent by the controller."
::= { cLDhcpStatsShowEntry 13 }
cLDhcpRxDiscoverPackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP discover packets
received by the controller."
::= { cLDhcpStatsShowEntry 14 }
--********************************************************************
-- cLDhcpScopeStatsTable - scope statistics
--********************************************************************
cLDhcpScopeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLDhcpScopeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains various statistics of each scope
for the DHCP Server."
::= { ciscoLwappDhcpScopeStats 1 }
cLDhcpScopeStatsEntry OBJECT-TYPE
SYNTAX CLDhcpScopeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the statistics of DHCP scope."
INDEX { cLDhcpScopeIndex }
::= { cLDhcpScopeStatsTable 1 }
CLDhcpScopeStatsEntry ::=
SEQUENCE {
cLDhcpScopeIndex Unsigned32,
cLDhcpScopeAddressPoolUsage Unsigned32,
cLDhcpScopeName SnmpAdminString,
cLDhcpScopeAllocatedIP Counter32,
cLDhcpScopeAvailableIP Counter32,
cLDhcpScopeDiscoverPkts Counter32,
cLDhcpScopeAckPkts Counter32,
cLDhcpScopeOfferPkts Counter32,
cLDhcpScopeTotalAckPkts Counter32,
cLDhcpScopeRequestPkts Counter32,
cLDhcpScopeRequestGoodPkts Counter32
}
cLDhcpScopeIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the DHCP scope identifier."
::= { cLDhcpScopeStatsEntry 1 }
cLDhcpScopeAddressPoolUsage OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the address pool usage percentage
of DHCP scope."
::= { cLDhcpScopeStatsEntry 2 }
cLDhcpScopeName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the name of DHCP scope."
::= { cLDhcpScopeStatsEntry 3 }
cLDhcpScopeAllocatedIP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of IP address allocated
per DHCP pool."
::= { cLDhcpScopeStatsEntry 4 }
cLDhcpScopeAvailableIP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of IP address available
per DHCP pool."
::= { cLDhcpScopeStatsEntry 5 }
cLDhcpScopeDiscoverPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP discover
packets received per DHCP pool."
::= { cLDhcpScopeStatsEntry 6 }
cLDhcpScopeAckPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of Ack packets received.
This excludes renewing and rebinding packets per DHCP
pool."
::= { cLDhcpScopeStatsEntry 7 }
cLDhcpScopeOfferPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP offer packets
received per DHCP pool."
::= { cLDhcpScopeStatsEntry 8 }
cLDhcpScopeTotalAckPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of Ack packets
received per DHCP pool."
::= { cLDhcpScopeStatsEntry 9 }
cLDhcpScopeRequestPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP request
packets received per DHCP pool."
::= { cLDhcpScopeStatsEntry 10 }
cLDhcpScopeRequestGoodPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of DHCP request
packets which have been handled successfully per DHCP
pool."
::= { cLDhcpScopeStatsEntry 11 }
--********************************************************************
-- * Notifications
--********************************************************************
cLDhcpTrapSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents whether this trap is enabled or
disabled.
A value of 'true' indicates that DHCP trap is enabled
A value of 'false' indicates that DHCP trap is disabled."
::= { ciscoLwappDhcpMIBNotifObjects 1 }
--********************************************************************
-- * Notifications
--********************************************************************
ciscoLwappDhcpScopeAddressExhaust NOTIFICATION-TYPE
OBJECTS {
cLDhcpScopeName,
cLDhcpTrapSet
}
STATUS current
DESCRIPTION
"This notification will be sent whenever the DHCP Scope
has no IP address available, with cLDhcpTrapSet set to
true. When the clients released an IP address lately, this
notification is sent with cLDhcpTrapSet set to false."
::= { ciscoLwappDhcpMIBNotif 1 }
-- ********************************************************************
-- * Units of conformance
-- ********************************************************************
ciscoLwappDhcpMIBCompliances OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIBConform 1 }
ciscoLwappDhcpMIBGroups OBJECT IDENTIFIER
::= { ciscoLwappDhcpMIBConform 2 }
ciscoLwappDhcpMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappDhcpMIB module."
MODULE -- this module
MANDATORY-GROUPS { ciscoLwappDhcpMIBConfigGroup }
OBJECT cLDhcpClearAllStats
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access is not required."
OBJECT cLDhcpOpt82RemoteIdFormat
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access is not required."
OBJECT cLDhcpClearStats
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access is not required."
OBJECT cLDhcpProxy
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access is not required."
OBJECT cLDhcpOpt37RemoteIdFormat
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access is not required."
::= { ciscoLwappDhcpMIBCompliances 1 }
-- ********************************************************************
-- * Units of conformance
-- ********************************************************************
ciscoLwappDhcpMIBConfigGroup OBJECT-GROUP
OBJECTS {
cLDhcpClearAllStats,
cLDhcpOpt82RemoteIdFormat,
cLDhcpClearAllDiscontinuityTime,
cLDhcpTimeout,
cLDhcpOpt37RemoteIdFormat,
cLDhcpClearStats,
cLDhcpClearDiscontinuityTime,
cLDhcpProxy,
cLDhcpDiscoverPackets,
cLDhcpRequestPackets,
cLDhcpDeclinePackets,
cLDhcpInformPackets,
cLDhcpReleasePackets,
cLDhcpReplyPackets,
cLDhcpOfferPackets,
cLDhcpAckPackets,
cLDhcpNakPackets,
cLDhcpTxFailures,
cLDhcpLastResponseTime,
cLDhcpLastRequestTime
}
STATUS current
DESCRIPTION
"This collection of objects specifies the
parameters for DHCP."
::= { ciscoLwappDhcpMIBGroups 1 }
END