WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/cisco/CISCO-DMN-DSG-DR-MIB

348 lines
9.2 KiB
Plaintext
Raw Blame History

-- **************************************************************************
-- CISCO_DMN_DSG_DR.mib: Feature MIB file for Disaster Recovery
--
-- November 2013, Aakash Nigam
--
-- Copyright (c) Cisco Systems, Inc. 2012-2013. All rights reserved.
-- **************************************************************************
CISCO-DMN-DSG-DR-MIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY, Integer32
FROM SNMPv2-SMI
DisplayString, RowStatus
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
ciscoDSGUtilities
FROM CISCO-DMN-DSG-ROOT-MIB;
ciscoDSGDR MODULE-IDENTITY
LAST-UPDATED "201408300800Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems, Inc.
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 NETS
E-mail: cs-ipsla@cisco.com"
DESCRIPTION "Cisco generic DR MIB."
REVISION "201408300800Z"
DESCRIPTION "V01.00.00 2014-04-14"
::= { ciscoDSGUtilities 43 }
drGlobalCfg OBJECT IDENTIFIER ::= { ciscoDSGDR 1 }
--**************************************
-- DR Global Configuration Info
--**************************************
enable OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable/Enable Disaster Recovery Feature"
::= { drGlobalCfg 1 }
sigLockTime OBJECT-TYPE
SYNTAX INTEGER (5..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Signal Lock timer (In Seconds)"
::= { drGlobalCfg 2 }
sigLossTime OBJECT-TYPE
SYNTAX INTEGER (5..2160000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Signal Loss timer (In Seconds)"
::= { drGlobalCfg 3 }
verifyTimer OBJECT-TYPE
SYNTAX INTEGER (10..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Verify timer (In Seconds)"
::= { drGlobalCfg 4 }
profile OBJECT-TYPE
SYNTAX INTEGER {
local(1),
uplink(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local/Uplink Disaster Recovery Profile"
::= { drGlobalCfg 5 }
--**************************************
-- DR BackupTransport Table
--**************************************
backupTransportTable OBJECT-TYPE
SYNTAX SEQUENCE OF BackupTransportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DR BackupTransport Configuration Table."
::= { ciscoDSGDR 2}
backupTransportEntry OBJECT-TYPE
SYNTAX BackupTransportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for Disaster Recovery BackupTransport Configuration."
INDEX { backupTransportIndex }
::= { backupTransportTable 1 }
BackupTransportEntry ::= SEQUENCE
{
backupTransportIndex Integer32,
backupTransportSetIdx Integer32,
backupTransportDvbsFec INTEGER,
backupTransportEwFlag INTEGER,
backupTransportFrequency Integer32,
backupTransportRFInput INTEGER,
backupTransportModSys INTEGER,
backupTransportNetId Integer32,
backupTransportOrbitalPos Integer32,
backupTransportOrbpolarization Integer32,
backupTransportSymbRate Integer32,
backupTransportRollOffFactor INTEGER,
backupTransportRowstatus INTEGER
}
backupTransportIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DR CSI record index"
::= { backupTransportEntry 1 }
backupTransportSetIdx OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DR CSI Idx."
::= { backupTransportEntry 2 }
backupTransportDvbsFec OBJECT-TYPE
SYNTAX INTEGER {
oneHalf(1),
twoThirds(3),
threeQuarters(4),
fiveSixths(6),
sevenEigths(7),
auto(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DR DVBS Forward Error Correction: Forward Error Correction Rate.
For DVB-S2 modulation only auto is applicable.
For DVB-S modulation all options are applicable."
::= { backupTransportEntry 3 }
backupTransportEwFlag OBJECT-TYPE
SYNTAX INTEGER {
east(1),
west(2),
notApplicable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DR E/W Flag"
::= { backupTransportEntry 4 }
backupTransportFrequency OBJECT-TYPE
SYNTAX Integer32 (0..15000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DR Frequency: The Satellite Downlink frequency in the range of
0 to 15000000 KHz in steps of 1 KHz.."
::= { backupTransportEntry 5 }
backupTransportRFInput OBJECT-TYPE
SYNTAX INTEGER {
rf1(1),
rf2(2),
rf3(3),
rf4(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DR Input: Select Input for tuning"
::= { backupTransportEntry 6 }
backupTransportModSys OBJECT-TYPE
SYNTAX INTEGER {
qpsk_dvb-s(1),
qpsk_dvb-S2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DR Modulation System."
::= { backupTransportEntry 7 }
backupTransportNetId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network Id."
::= { backupTransportEntry 8 }
backupTransportOrbitalPos OBJECT-TYPE
SYNTAX Integer32(0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DR Orbital Position"
::= { backupTransportEntry 9 }
backupTransportOrbpolarization OBJECT-TYPE
SYNTAX Integer32(0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Orbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1 10th of a degree"
::= { backupTransportEntry 10 }
backupTransportSymbRate OBJECT-TYPE
SYNTAX Integer32 (10000..450000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Data rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 10^2 )."
::= { backupTransportEntry 11 }
backupTransportRollOffFactor OBJECT-TYPE
SYNTAX INTEGER {f35(1),f25(25),f20(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DR Rollof Factor:Alpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100."
::= { backupTransportEntry 12 }
backupTransportRowstatus OBJECT-TYPE
SYNTAX INTEGER {active(1),
inactive(2),
delete(3),
add(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus."
::= { backupTransportEntry 13 }
--**************************************
-- DR BackupSet Table
--**************************************
backupSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF BackupSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DR BackupSet Configuration Table."
::= { ciscoDSGDR 3}
backupSetEntry OBJECT-TYPE
SYNTAX BackupSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for Disaster Recovery BackupSet Configuration."
INDEX { backupSetPeid , backupSetRecid }
::= { backupSetTable 1 }
BackupSetEntry ::= SEQUENCE
{
backupSetPeid Integer32,
backupSetRecid Integer32,
backupSetCsiidx Integer32,
backupSetBkpch Integer32,
backupSetBkpchDispText DisplayString,
backupSetRowStatus INTEGER
}
backupSetPeid OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BackupSet PEId"
::= { backupSetEntry 1 }
backupSetRecid OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Backup Set Record Index"
::= { backupSetEntry 2 }
backupSetCsiidx OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CSI Index."
::= { backupSetEntry 3 }
backupSetBkpch OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Backup Channel."
::= { backupSetEntry 4 }
backupSetBkpchDispText OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Backup Channel Display Text"
::= { backupSetEntry 5 }
backupSetRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Backup Row Status."
::= { backupSetEntry 6 }
END
View Git Blame Copy Permalink