WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/cisco/CISCO-ATM-PVCTRAP-EXTN-MIB

2649 lines
107 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-ATM-PVCTRAP-EXTN-MIB: atm pvc trap mib extension
--
-- September 2001 Hrishikesh Kulkarni
--
-- Copyright (c) 2001, 2002, 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-ATM-PVCTRAP-EXTN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Gauge32,
Counter32,
Unsigned32
FROM SNMPv2-SMI
TimeStamp,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
atmInterfaceConfEntry,
atmVclVpi,
atmVclVci
FROM ATM-MIB
atmIntfPvcFailures,
atmIntfCurrentlyFailingPVcls
FROM CISCO-IETF-ATM2-PVCTRAP-MIB
ciscoExperiment
FROM CISCO-SMI;
ciscoAtmPvcTrapExtnMIB MODULE-IDENTITY
LAST-UPDATED "200303240000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-atm@cisco.com"
DESCRIPTION
"This MIB Module is a supplement to the
CISCO-IETF-ATM2-PVCTRAP-MIB."
REVISION "200303240000Z"
DESCRIPTION
"Added support for separate segment and end
AIS/RDI failure and recovery notifications
catmIntfPvcSegAISRDIFailureTrap,
catmIntfPvcEndAISRDIFailureTrap,
catmIntfPvcSegAISRDIRecoverTrap,
catmIntfPvcEndAISRDIRecoverTrap; added
support for tables
catmSegAISRDIStatChPVclRngeTable,
catmEndAISRDIStatChPVclRngeTable,
catmSegAISRDIStatUpPVclRngeTable,
catmEndAISRDIStatUpPVclRngeTable to record
various objects sent in the notifications
associated with segment and end AIS/RDI
failure and recivery."
REVISION "200301200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoExperiment 97 }
-- Caution. This MIB is temporary and experimental. In the future
-- it will be removed from products, perhaps with short notice, in
-- favor of more standard or generic MIBs. Application developers
-- should not depend on long-term access to this MIB.
--
--
-- Textual Conventions
--
--
CatmOAMRecoveryType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate different types of OAM recoveries .
catmLoopbackOAMRecover - The object in query is Loopback OAM
type of recovery.
catmSegmentCCOAMRecover - The object in query is Segment CC
OAM type of recovery.
catmEndCCOAMRecover - The object in query is End-to-End
CC OAM type of recovery.
catmAISRDIOAMRecover - The object in query is AISRDI OAM
type of recovery.
catmSegAISRDIOAMRecover - The object in query is Segment
AISRDI OAM type of recovery.
catmEndAISRDIOAMRecover - The object in query is End
AISRDI OAM type of recovery."
SYNTAX INTEGER {
catmLoopbackOAMRecover(1),
catmSegmentCCOAMRecover(2),
catmEndCCOAMRecover(4),
catmAISRDIOAMRecover(8),
catmSegAISRDIOAMRecover(16),
catmEndAISRDIOAMRecover(32)
}
CatmOAMFailureType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate different types of OAM recoveries .
catmLoopbackOAMFailure - The object in query is Loopback OAM
type of failure.
catmSegmentCCOAMFailure - The object in query is Segment CC
OAM type of failure.
catmEndCCOAMFailure - The object in query is End-to-End
CC OAM type of failure.
catmAISRDIOAMFailure - The object in query is AISRDI OAM
type of failure.
catmSegAISRDIOAMFailure - The object in query is Segment
AISRDI OAM type of failure.
catmEndAISRDIOAMFailure - The object in query is End
AISRDI OAM type of failure."
SYNTAX INTEGER {
catmLoopbackOAMFailure(1),
catmSegmentCCOAMFailure(2),
catmEndCCOAMFailure(4),
catmAISRDIOAMFailure(8),
catmSegAISRDIOAMFailure(16),
catmEndAISRDIOAMFailure(32)
}
ciscoAtmPvcTrapExtnMIBObjects OBJECT IDENTIFIER ::=
{ ciscoAtmPvcTrapExtnMIB 1 }
catmInterfaceExt2Table OBJECT-TYPE
SYNTAX SEQUENCE OF CatmInterfaceExt2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains ATM interface monitoring
information not defined in the
atmInterfaceConfTable from the ATM-MIB and
atmInterfaceExtTable CISCO-IETF-ATM2-PVCTRAP-MIB."
::= { ciscoAtmPvcTrapExtnMIBObjects 1 }
catmInterfaceExt2Entry OBJECT-TYPE
SYNTAX CatmInterfaceExt2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry extends the atmInterfaceConfEntry
defined in ATM MIB. Each entry corresponds
to an ATM interface."
AUGMENTS { atmInterfaceConfEntry }
::= { catmInterfaceExt2Table 1 }
CatmInterfaceExt2Entry ::= SEQUENCE {
catmIntfCurrentlyDownToUpPVcls Gauge32,
catmIntfOAMFailedPVcls Gauge32,
catmIntfCurrentOAMFailingPVcls Gauge32,
catmIntfSegCCOAMFailedPVcls Gauge32,
catmIntfCurSegCCOAMFailingPVcls Gauge32,
catmIntfEndCCOAMFailedPVcls Gauge32,
catmIntfCurEndCCOAMFailingPVcls Gauge32,
catmIntfAISRDIOAMFailedPVcls Gauge32,
catmIntfCurAISRDIOAMFailingPVcls Gauge32,
catmIntfAnyOAMFailedPVcls Gauge32,
catmIntfCurAnyOAMFailingPVcls Gauge32,
catmIntfTypeOfOAMFailure CatmOAMFailureType,
catmIntfOAMRcovedPVcls Gauge32,
catmIntfCurrentOAMRcovingPVcls Gauge32,
catmIntfSegCCOAMRcovedPVcls Gauge32,
catmIntfCurSegCCOAMRcovingPVcls Gauge32,
catmIntfEndCCOAMRcovedPVcls Gauge32,
catmIntfCurEndCCOAMRcovingPVcls Gauge32,
catmIntfAISRDIOAMRcovedPVcls Gauge32,
catmIntfCurAISRDIOAMRcovingPVcls Gauge32,
catmIntfAnyOAMRcovedPVcls Gauge32,
catmIntfCurAnyOAMRcovingPVcls Gauge32,
catmIntfTypeOfOAMRecover CatmOAMRecoveryType,
catmIntfSegAISRDIFailedPVcls Gauge32,
catmIntfCurSegAISRDIFailingPVcls Gauge32,
catmIntfEndAISRDIFailedPVcls Gauge32,
catmIntfCurEndAISRDIFailingPVcls Gauge32,
catmIntfSegAISRDIRcovedPVcls Gauge32,
catmIntfCurSegAISRDIRcovingPVcls Gauge32,
catmIntfEndAISRDIRcovedPVcls Gauge32,
catmIntfCurEndAISRDIRcovingPVcls Gauge32
}
catmIntfCurrentlyDownToUpPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number PVCLs on this interface which
changed state to 'up' since the last
atmIntPvcUp2Trap was sent."
::= { catmInterfaceExt2Entry 1 }
catmIntfOAMFailedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the OAM loopback failed condition but
the status of each PVCL remain in the 'up' state."
::= { catmInterfaceExt2Entry 2 }
catmIntfCurrentOAMFailingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
OAM loop back has failed but the status of each PVCL remain
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 3 }
catmIntfSegCCOAMFailedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the Segment CC OAM failed condition
but the status of each PVCL remain in the 'up' state."
::= { catmInterfaceExt2Entry 4 }
catmIntfCurSegCCOAMFailingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
Segment CC OAM has failed but the status of each PVCL remain
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 5 }
catmIntfEndCCOAMFailedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the End-to-End CC OAM failed condition
but the status of each PVCL remain in the 'up' state."
::= { catmInterfaceExt2Entry 6 }
catmIntfCurEndCCOAMFailingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
End-to-End CC OAM has failed but the status of each PVCL
remain in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 7 }
catmIntfAISRDIOAMFailedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the AIS RDI OAM failed condition but
the status of each PVCL remain in the 'up' state."
::= { catmInterfaceExt2Entry 8 }
catmIntfCurAISRDIOAMFailingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
AIS RDI OAM has failed but the status of each PVCL remain
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 9 }
catmIntfAnyOAMFailedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in any type of OAM failed condition but
the status of each PVCL remain in the 'up' state."
::= { catmInterfaceExt2Entry 10 }
catmIntfCurAnyOAMFailingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which
any of OAM has failed but the status of each PVCL remain
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 11 }
catmIntfTypeOfOAMFailure OBJECT-TYPE
SYNTAX CatmOAMFailureType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of OAM failure."
::= { catmInterfaceExt2Entry 12 }
catmIntfOAMRcovedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the OAM loopback recovered condition and
the status of each PVCL is in the 'up' state."
::= { catmInterfaceExt2Entry 13 }
catmIntfCurrentOAMRcovingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
OAM loop back has recovered and the status of each PVCL is
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 14 }
catmIntfSegCCOAMRcovedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the Segment CC OAM recovered condition
and the status of each PVCL is in the 'up' state."
::= { catmInterfaceExt2Entry 15 }
catmIntfCurSegCCOAMRcovingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
Segment CC OAM has recovered and the status of each PVCL is
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 16 }
catmIntfEndCCOAMRcovedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the End-to-End CC OAM recovered condition
and the status of each PVCL is in the 'up' state."
::= { catmInterfaceExt2Entry 17 }
catmIntfCurEndCCOAMRcovingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
End-to-End CC OAM has recovered and the status of each PVCL
is in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 18 }
catmIntfAISRDIOAMRcovedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the AIS RDI OAM recovered condition and
the status of each PVCL is in the 'up' state."
::= { catmInterfaceExt2Entry 19 }
catmIntfCurAISRDIOAMRcovingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
AIS RDI OAM has recovered and the status of each PVCL is
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 20 }
catmIntfAnyOAMRcovedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in any type of OAM recovered condition and
the status of each PVCL is in the 'up' state."
::= { catmInterfaceExt2Entry 21 }
catmIntfCurAnyOAMRcovingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which
any of OAM has recovered and the status of each PVCL is
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 22 }
catmIntfTypeOfOAMRecover OBJECT-TYPE
SYNTAX CatmOAMRecoveryType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of OAM Recovered"
::= { catmInterfaceExt2Entry 23 }
catmIntfSegAISRDIFailedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the Segment AIS RDI OAM failed
condition but the status of each PVCL remain in
the 'up' state."
::= { catmInterfaceExt2Entry 24 }
catmIntfCurSegAISRDIFailingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
Segment AIS RDI OAM has failed but the status of each PVCL
remain in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 25 }
catmIntfEndAISRDIFailedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the End AIS RDI OAM failed
condition but the status of each PVCL remain in
the 'up' state."
::= { catmInterfaceExt2Entry 26 }
catmIntfCurEndAISRDIFailingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
End AIS RDI OAM has failed but the status of each PVCL
remain in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 27 }
catmIntfSegAISRDIRcovedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs in this interface which
are currently in the Segment AIS RDI OAM recovered
condition and the status of each PVCL is in the
'up' state."
::= { catmInterfaceExt2Entry 28 }
catmIntfCurSegAISRDIRcovingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
Segment AIS RDI OAM has recovered and the status of each
PVCL is in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 29 }
catmIntfEndAISRDIRcovedPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PVCLs on this interface which
are currently in the End AIS RDI OAM recovered condition
and the status of each PVCL is in the 'up' state."
::= { catmInterfaceExt2Entry 30 }
catmIntfCurEndAISRDIRcovingPVcls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of PVCLs on this interface for which the
End AIS RDI OAM has recovered and the status of each PVCL is
in the 'up' state in the last notification interval."
::= { catmInterfaceExt2Entry 31 }
catmCurStatChangePVclTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmCurStatChangePVclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating all VCLs for which there is an
active row in the atmVclTable having an atmVclConnKind
value of `pvc' and atmVclOperStatus to have changed in the
last corresponding PVC notification."
::= { ciscoAtmPvcTrapExtnMIBObjects 2 }
catmCurStatChangePVclEntry OBJECT-TYPE
SYNTAX CatmCurStatChangePVclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the table represents a VCL for which
there is an active row in the atmVclTable having an
atmVclConnKind value of `pvc' and atmVclOperStatus
to have changed in the last corresponding PVC notification."
INDEX { ifIndex, atmVclVpi, atmVclVci }
::= { catmCurStatChangePVclTable 1 }
CatmCurStatChangePVclEntry ::= SEQUENCE {
catmPVclStatusTransition Counter32,
catmPVclStatusChangeStart TimeStamp,
catmPVclStatusChangeEnd TimeStamp,
catmPVclSegCCStatusTransition Counter32,
catmPVclSegCCStatusChangeStart TimeStamp,
catmPVclSegCCStatusChangeEnd TimeStamp,
catmPVclEndCCStatusTransition Counter32,
catmPVclEndCCStatusChangeStart TimeStamp,
catmPVclEndCCStatusChangeEnd TimeStamp,
catmPVclAISRDIStatusTransition Counter32,
catmPVclAISRDIStatusChangeStart TimeStamp,
catmPVclAISRDIStatusChangeEnd TimeStamp,
catmPVclCurFailTime TimeStamp,
catmPVclPrevRecoverTime TimeStamp,
catmPVclFailureReason CatmOAMFailureType,
catmPVclSegAISRDIStatTransition Gauge32,
catmPVclSegAISRDIStatChangeStart TimeStamp,
catmPVclSegAISRDIStatChangeEnd TimeStamp,
catmPVclEndAISRDIStatTransition Gauge32,
catmPVclEndAISRDIStatChangeStart TimeStamp,
catmPVclEndAISRDIStatChangeEnd TimeStamp
}
catmPVclStatusTransition OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions that has happened
on this PVCL in the last corresponding notification."
::= { catmCurStatChangePVclEntry 2 }
catmPVclStatusChangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state for the
first time in the last corresponding notification."
::= { catmCurStatChangePVclEntry 3 }
catmPVclStatusChangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last state change of this PVCL
in the last corresponding notification."
::= { catmCurStatChangePVclEntry 4 }
catmPVclSegCCStatusTransition OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions that has happened
on this PVCL in the last corresponding notification due
to Segment CC OAM failure."
::= { catmCurStatChangePVclEntry 5 }
catmPVclSegCCStatusChangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to Segment CC OAM failure."
::= { catmCurStatChangePVclEntry 6 }
catmPVclSegCCStatusChangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last state change of this PVCL
in the last corresponding notification due
to Segment CC OAM failure."
::= { catmCurStatChangePVclEntry 7 }
catmPVclEndCCStatusTransition OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions that has happened
on this PVCL in the last corresponding notification due
to End CC OAM failure."
::= { catmCurStatChangePVclEntry 8 }
catmPVclEndCCStatusChangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to End CC OAM failure."
::= { catmCurStatChangePVclEntry 9 }
catmPVclEndCCStatusChangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last state change of this PVCL
in the last corresponding notification due
to End CC OAM failure."
::= { catmCurStatChangePVclEntry 10 }
catmPVclAISRDIStatusTransition OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions that has happened
on this PVCL in the last corresponding notification due
to AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 11 }
catmPVclAISRDIStatusChangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 12 }
catmPVclAISRDIStatusChangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last state change of this PVCL
in the last corresponding notification due
to AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 13 }
catmPVclCurFailTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to DOWN
last time in the last corresponding notification ."
::= { catmCurStatChangePVclEntry 14 }
catmPVclPrevRecoverTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to UP
last time in the previous corresponding notification ."
::= { catmCurStatChangePVclEntry 15 }
catmPVclFailureReason OBJECT-TYPE
SYNTAX CatmOAMFailureType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of OAM failure."
::= { catmCurStatChangePVclEntry 16 }
catmPVclSegAISRDIStatTransition OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions that has happened
on this PVCL in the last corresponding notification due
to Segment AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 17 }
catmPVclSegAISRDIStatChangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to Segment AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 18 }
catmPVclSegAISRDIStatChangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last state change of this PVCL
in the last corresponding notification due
to Segment AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 19 }
catmPVclEndAISRDIStatTransition OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions that has happened
on this PVCL in the last corresponding notification due
to End AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 20 }
catmPVclEndAISRDIStatChangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to End AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 21 }
catmPVclEndAISRDIStatChangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last state change of this PVCL
in the last corresponding notification due
to End AIS RDI OAM failure."
::= { catmCurStatChangePVclEntry 22 }
catmStatusChangePVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmStatusChangePVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and atmVclOperStatus to have changed in the same
direction in the last corresponding PVC notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 3 }
catmStatusChangePVclRangeEntry OBJECT-TYPE
SYNTAX CatmStatusChangePVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and atmVclOperStatus to have
changed in the same direction in the last notification
interval."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmStatusChangePVclRangeTable 1 }
CatmStatusChangePVclRangeEntry ::= SEQUENCE {
catmStatusChangePVclRangeIndex INTEGER,
catmPVclLowerRangeValue INTEGER,
catmPVclHigherRangeValue INTEGER,
catmPVclRangeStatusChangeStart TimeStamp,
catmPVclRangeStatusChangeEnd TimeStamp
}
catmStatusChangePVclRangeIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index to represent different ranges, the first range is
indexed by value 0, the second by 1 and so on..."
::= { catmStatusChangePVclRangeEntry 1 }
catmPVclLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
atmVclOperStatus to have changed in the last
corresponding notification due to Loopback OAM failure."
::= { catmStatusChangePVclRangeEntry 2 }
catmPVclHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
atmOperStatus to have changed in the last
corresponding notification due to Loopback OAM failure."
::= { catmStatusChangePVclRangeEntry 3 }
catmPVclRangeStatusChangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first PVCL in the range
changed state in the last corresponding notification due
to Loopback OAM failure."
::= { catmStatusChangePVclRangeEntry 4 }
catmPVclRangeStatusChangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last PVCL in the range
changed state in the last corresponding notification due
to Loopback OAM failure."
::= { catmStatusChangePVclRangeEntry 5 }
catmSegCCStatusChPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmSegCCStatusChPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and atmVclOperStatus to have changed due to segment CC
failure in the same direction in the last PVC
corresponding notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 5 }
catmSegCCStatusChPVclRangeEntry OBJECT-TYPE
SYNTAX CatmSegCCStatusChPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and atmVclOperStatus to have
changed due to segment CC failure in the same direction
in the last corresponding notification ."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmSegCCStatusChPVclRangeTable 1 }
CatmSegCCStatusChPVclRangeEntry ::= SEQUENCE {
catmPVclSegCCLowerRangeValue INTEGER,
catmPVclSegCCHigherRangeValue INTEGER,
catmPVclSegCCRangeStatusChStart TimeStamp,
catmPVclSegCCRangeStatusChEnd TimeStamp
}
catmPVclSegCCLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
atmVclOperStatus to have changed in the last
corresponding notification due to Segment CC OAM failure."
::= { catmSegCCStatusChPVclRangeEntry 1 }
catmPVclSegCCHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
atmOperStatus to have changed in the last
corresponding notification due to Segment CC OAM failure."
::= { catmSegCCStatusChPVclRangeEntry 2 }
catmPVclSegCCRangeStatusChStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first PVCL in the range
changed state in the last corresponding notification due
to Segment CC OAM failure."
::= { catmSegCCStatusChPVclRangeEntry 3 }
catmPVclSegCCRangeStatusChEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last PVCL in the range
changed state in the last corresponding notification due
to Segment CC OAM failure."
::= { catmSegCCStatusChPVclRangeEntry 4 }
catmEndCCStatusChPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmEndCCStatusChPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and atmVclOperStatus to have changed due to End CC failure
in the same direction in the last PVC notification
interval."
::= { ciscoAtmPvcTrapExtnMIBObjects 6 }
catmEndCCStatusChPVclRangeEntry OBJECT-TYPE
SYNTAX CatmEndCCStatusChPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and atmVclOperStatus to have
changed due to End CC failure in the same direction in the
last corresponding notification ."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmEndCCStatusChPVclRangeTable 1 }
CatmEndCCStatusChPVclRangeEntry ::= SEQUENCE {
catmPVclEndCCLowerRangeValue INTEGER,
catmPVclEndCCHigherRangeValue INTEGER,
catmPVclEndCCRangeStatusChStart TimeStamp,
catmPVclEndCCRangeStatusChEnd TimeStamp
}
catmPVclEndCCLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
atmVclOperStatus to have changed in the last
corresponding notification due to End CC OAM failure."
::= { catmEndCCStatusChPVclRangeEntry 1 }
catmPVclEndCCHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
atmOperStatus to have changed in the last
corresponding notification due to End CC OAM failure."
::= { catmEndCCStatusChPVclRangeEntry 2 }
catmPVclEndCCRangeStatusChStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first PVCL in the range
changed state in the last corresponding notification due
to End CC OAM failure."
::= { catmEndCCStatusChPVclRangeEntry 3 }
catmPVclEndCCRangeStatusChEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last PVCL in the range
changed state in the last corresponding notification due
to End CC OAM failure."
::= { catmEndCCStatusChPVclRangeEntry 4 }
catmAISRDIStatusChPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmAISRDIStatusChPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and atmVclOperStatus to have changed due to AIS/RDI failure
in the same direction in the last corresponding PVC
notification."
::= { ciscoAtmPvcTrapExtnMIBObjects 7 }
catmAISRDIStatusChPVclRangeEntry OBJECT-TYPE
SYNTAX CatmAISRDIStatusChPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and atmVclOperStatus to have
changed due to AIS/RDI failure in the same direction in the
last corresponding notification ."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmAISRDIStatusChPVclRangeTable 1 }
CatmAISRDIStatusChPVclRangeEntry ::= SEQUENCE {
catmPVclAISRDILowerRangeValue INTEGER,
catmPVclAISRDIHigherRangeValue INTEGER,
catmPVclAISRDIRangeStatusChStart TimeStamp,
catmPVclAISRDIRangeStatusChEnd TimeStamp
}
catmPVclAISRDILowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
atmVclOperStatus to have changed in the last
corresponding notification due to AISRDI OAM failure."
::= { catmAISRDIStatusChPVclRangeEntry 1 }
catmPVclAISRDIHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
atmOperStatus to have changed in the last
corresponding notification due to AISRDI OAM failure."
::= { catmAISRDIStatusChPVclRangeEntry 2 }
catmPVclAISRDIRangeStatusChStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first PVCL in the range
changed state in the last corresponding notification due
to AISRDI OAM failure."
::= { catmAISRDIStatusChPVclRangeEntry 3 }
catmPVclAISRDIRangeStatusChEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last PVCL in the range
changed state in the last corresponding notification due
to AISRDI OAM failure."
::= { catmAISRDIStatusChPVclRangeEntry 4 }
catmSegAISRDIStatChPVclRngeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmSegAISRDIStatChPVclRngeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the range of configured PVCs for which
segment AIS/RDI failure is detected and which are in the
segment AIS/RDI failed state. It also gives the information
about the timestamp at which the the first and last segment
AIS/RDI failure is detected for the range of PVCs."
::= { ciscoAtmPvcTrapExtnMIBObjects 15 }
catmSegAISRDIStatChPVclRngeEntry OBJECT-TYPE
SYNTAX CatmSegAISRDIStatChPVclRngeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of PVC and segment AIS/RDI OAM
status to have detected as failed and is presently in
the segment AIS/RDI failed state."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmSegAISRDIStatChPVclRngeTable 1 }
CatmSegAISRDIStatChPVclRngeEntry ::= SEQUENCE {
catmPVclSegAISRDILowerRangeValue Unsigned32,
catmPVclSegAISRDIHigherRangeValue Unsigned32,
catmPVclSegAISRDIRangeStatChStart TimeStamp,
catmPVclSegAISRDIRangeStatChEnd TimeStamp
}
catmPVclSegAISRDILowerRangeValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
atmVclOperStatus to have changed in the last
corresponding notification due to Segment AISRDI
OAM failure."
::= { catmSegAISRDIStatChPVclRngeEntry 1 }
catmPVclSegAISRDIHigherRangeValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
atmOperStatus to have changed in the last
corresponding notification due to Segment AISRDI
OAM failure."
::= { catmSegAISRDIStatChPVclRngeEntry 2 }
catmPVclSegAISRDIRangeStatChStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first PVCL in the range
changed state in the last corresponding notification due
to Segment AISRDI OAM failure."
::= { catmSegAISRDIStatChPVclRngeEntry 3 }
catmPVclSegAISRDIRangeStatChEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last PVCL in the range
changed state in the last corresponding notification due
to Segment AISRDI OAM failure."
::= { catmSegAISRDIStatChPVclRngeEntry 4 }
catmEndAISRDIStatChPVclRngeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmEndAISRDIStatChPVclRngeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the range of configured PVCs for which
end AIS/RDI failure is detected and which are in the
end AIS/RDI failed state. It also gives the information
about the timestamp at which the the first and last end
AIS/RDI failure is detected for the range of PVCs."
::= { ciscoAtmPvcTrapExtnMIBObjects 16 }
catmEndAISRDIStatChPVclRngeEntry OBJECT-TYPE
SYNTAX CatmEndAISRDIStatChPVclRngeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of PVC and End AIS/RDI OAM status
to have detected as failed and is presently in
the end AIS/RDI failed state."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmEndAISRDIStatChPVclRngeTable 1 }
CatmEndAISRDIStatChPVclRngeEntry ::= SEQUENCE {
catmPVclEndAISRDILowerRangeValue Unsigned32,
catmPVclEndAISRDIHigherRngeValue Unsigned32,
catmPVclEndAISRDIRngeStatChStart TimeStamp,
catmPVclEndAISRDIRangeStatChEnd TimeStamp
}
catmPVclEndAISRDILowerRangeValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
atmVclOperStatus to have changed in the last
corresponding notification due to End AISRDI OAM failure."
::= { catmEndAISRDIStatChPVclRngeEntry 1 }
catmPVclEndAISRDIHigherRngeValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
atmOperStatus to have changed in the last
corresponding notification due to End AISRDI OAM failure."
::= { catmEndAISRDIStatChPVclRngeEntry 2 }
catmPVclEndAISRDIRngeStatChStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first PVCL in the range
changed state in the last corresponding notification due
to End AISRDI OAM failure."
::= { catmEndAISRDIStatChPVclRngeEntry 3 }
catmPVclEndAISRDIRangeStatChEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last PVCL in the range
changed state in the last corresponding notification due
to End AISRDI OAM failure."
::= { catmEndAISRDIStatChPVclRngeEntry 4 }
catmDownPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmDownPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and atmVclOperStatus to have detected as Down
in the last corresponding PVC notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 8 }
catmDownPVclRangeEntry OBJECT-TYPE
SYNTAX CatmDownPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and atmVclOperStatus to
have detected as Down in the last notification
interval."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmDownPVclRangeTable 1 }
CatmDownPVclRangeEntry ::= SEQUENCE {
catmDownPVclLowerRangeValue INTEGER,
catmDownPVclHigherRangeValue INTEGER,
catmDownPVclRangeStart TimeStamp,
catmDownPVclRangeEnd TimeStamp,
catmPrevUpPVclRangeStart TimeStamp,
catmPrevUpPVclRangeEnd TimeStamp,
catmPVclRangeFailureReason CatmOAMFailureType
}
catmDownPVclLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
atmVclOperStatus has been detected as Down in the
corresponding notification ."
::= { catmDownPVclRangeEntry 1 }
catmDownPVclHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
atmVclOperStatus has been detected as Down in the
corresponding notification ."
::= { catmDownPVclRangeEntry 2 }
catmDownPVclRangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first atmVclOperStatus
is detected as Down on any of the PVCLs in the range
in the corresponding notification ."
::= { catmDownPVclRangeEntry 3 }
catmDownPVclRangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last atmVclOperStatus
is detected as Down on any of the PVCLs in the range
in the corresponding notification ."
::= { catmDownPVclRangeEntry 4 }
catmPrevUpPVclRangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first atmVclOperStatus
is detected as Up on any of the PVCLs in the range
in the previous catmIntfPvcUp2Trap notification."
::= { catmDownPVclRangeEntry 5 }
catmPrevUpPVclRangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last atmVclOperStatus
is detected as Up on any of the PVCLs in the range
in the previous catmIntfPvcUp2Trap notification."
::= { catmDownPVclRangeEntry 6 }
catmPVclRangeFailureReason OBJECT-TYPE
SYNTAX CatmOAMFailureType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of OAM failure."
::= { catmDownPVclRangeEntry 7 }
catmCurStatusUpPVclTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmCurStatusUpPVclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating all VCLs for which there is an
active row in the atmVclTable having an atmVclConnKind
value of `pvc' and atmVclOperStatus to have changed to UP
in the last corresponding PVC notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 9 }
catmCurStatusUpPVclEntry OBJECT-TYPE
SYNTAX CatmCurStatusUpPVclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the table represents a VCL for which
there is an active row in the atmVclTable having an
atmVclConnKind value of `pvc' and atmVclOperStatus
to have changed to UP in the last PVC notification
interval."
INDEX { ifIndex, atmVclVpi, atmVclVci }
::= { catmCurStatusUpPVclTable 1 }
CatmCurStatusUpPVclEntry ::= SEQUENCE {
catmPVclStatusUpTransition Gauge32,
catmPVclStatusUpStart TimeStamp,
catmPVclStatusUpEnd TimeStamp,
catmPVclSegCCStatusUpTransition Gauge32,
catmPVclSegCCStatusUpStart TimeStamp,
catmPVclSegCCStatusUpEnd TimeStamp,
catmPVclEndCCStatusUpTransition Gauge32,
catmPVclEndCCStatusUpStart TimeStamp,
catmPVclEndCCStatusUpEnd TimeStamp,
catmPVclAISRDIStatusUpTransition Gauge32,
catmPVclAISRDIStatusUpStart TimeStamp,
catmPVclAISRDIStatusUpEnd TimeStamp,
catmPVclCurRecoverTime TimeStamp,
catmPVclPrevFailTime TimeStamp,
catmPVclRecoveryReason CatmOAMRecoveryType,
catmPVclSegAISRDIStatUpTransit Gauge32,
catmPVclSegAISRDIStatUpStart TimeStamp,
catmPVclSegAISRDIStatUpEnd TimeStamp,
catmPVclEndAISRDIStatUpTransit Gauge32,
catmPVclEndAISRDIStatUpStart TimeStamp,
catmPVclEndAISRDIStatUpEnd TimeStamp
}
catmPVclStatusUpTransition OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Down to Up state transitions due to
OAM loopback recovery that has happened on this PVCL
in the last corresponding notification ."
::= { catmCurStatusUpPVclEntry 1 }
catmPVclStatusUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to UP
for the first time due to OAM loopback recovery
in the last corresponding notification ."
::= { catmCurStatusUpPVclEntry 2 }
catmPVclStatusUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to UP
for the last time due to OAM loopback recovery
in the last corresponding notification ."
::= { catmCurStatusUpPVclEntry 3 }
catmPVclSegCCStatusUpTransition OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Down to Up state transitions that has
happened on this PVCL in the last corresponding notification
due to Segment CC OAM recovery."
::= { catmCurStatusUpPVclEntry 4 }
catmPVclSegCCStatusUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up for
the first time in the last corresponding notification due
to Segment CC OAM recovery."
::= { catmCurStatusUpPVclEntry 5 }
catmPVclSegCCStatusUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp of the last state change of this PVCL
in the last corresponding notification due to Segment CC
OAM recovery."
::= { catmCurStatusUpPVclEntry 6 }
catmPVclEndCCStatusUpTransition OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Down to UP state transitions that has
happened on this PVCL in the last notification
interval due to End CC OAM recovery."
::= { catmCurStatusUpPVclEntry 7 }
catmPVclEndCCStatusUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up
for the first time in the last corresponding notification
due to End CC OAM recovery."
::= { catmCurStatusUpPVclEntry 8 }
catmPVclEndCCStatusUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up
for the last time in the last corresponding notification
due to End CC OAM recovery."
::= { catmCurStatusUpPVclEntry 9 }
catmPVclAISRDIStatusUpTransition OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Down to Up state transitions that
has happened on this PVCL in the last notification
interval due to AIS RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 10 }
catmPVclAISRDIStatusUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up
for the first time in the last corresponding notification
due to AIS/RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 11 }
catmPVclAISRDIStatusUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up
for the last time in the last corresponding notification
due to AIS/RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 12 }
catmPVclCurRecoverTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to UP
last time in the last corresponding notification ."
::= { catmCurStatusUpPVclEntry 13 }
catmPVclPrevFailTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to DOWN
last time in the previous corresponding notification ."
::= { catmCurStatusUpPVclEntry 14 }
catmPVclRecoveryReason OBJECT-TYPE
SYNTAX CatmOAMRecoveryType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of OAM Recovered"
::= { catmCurStatusUpPVclEntry 15 }
catmPVclSegAISRDIStatUpTransit OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Down to Up state transitions that
has happened on this PVCL in the last notification
interval due to Segment AIS RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 16 }
catmPVclSegAISRDIStatUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up
for the first time in the last corresponding notification
due to Segment AIS/RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 17 }
catmPVclSegAISRDIStatUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up
for the last time in the last corresponding notification
due to Segment AIS/RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 18 }
catmPVclEndAISRDIStatUpTransit OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Down to Up state transitions that
has happened on this PVCL in the last notification
interval due to End AIS RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 19 }
catmPVclEndAISRDIStatUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up
for the first time in the last corresponding notification
due to End AIS/RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 20 }
catmPVclEndAISRDIStatUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which this PVCL changed state to Up
for the last time in the last corresponding notification
due to End AIS/RDI OAM recovery."
::= { catmCurStatusUpPVclEntry 21 }
catmStatusUpPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmStatusUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and loopback OAM status to have detected as recovered
in the last corresponding PVC notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 10 }
catmStatusUpPVclRangeEntry OBJECT-TYPE
SYNTAX CatmStatusUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and loopback OAM status to
have detected as recovered in the last notification
interval."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmStatusUpPVclRangeTable 1 }
CatmStatusUpPVclRangeEntry ::= SEQUENCE {
catmPVclUpLowerRangeValue INTEGER,
catmPVclUpHigherRangeValue INTEGER,
catmPVclRangeStatusUpStart TimeStamp,
catmPVclRangeStatusUpEnd TimeStamp
}
catmPVclUpLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
Loopback OAM recovery has been detected in the last
corresponding notification ."
::= { catmStatusUpPVclRangeEntry 1 }
catmPVclUpHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
Loopback OAM recovery has been detected in the last
corresponding notification ."
::= { catmStatusUpPVclRangeEntry 2 }
catmPVclRangeStatusUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first Loopback OAM recovery
is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmStatusUpPVclRangeEntry 3 }
catmPVclRangeStatusUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last Loopback OAM recovery
is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmStatusUpPVclRangeEntry 4 }
catmSegCCStatusUpPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmSegCCStatusUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and Segment CC OAM status to have detected as recovered
in the last corresponding PVC notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 11 }
catmSegCCStatusUpPVclRangeEntry OBJECT-TYPE
SYNTAX CatmSegCCStatusUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and Segment CC OAM status to
have detected as recovered in the last notification
interval."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmSegCCStatusUpPVclRangeTable 1 }
CatmSegCCStatusUpPVclRangeEntry ::= SEQUENCE {
catmPVclSegCCUpLowerRangeValue INTEGER,
catmPVclSegCCUpHigherRangeValue INTEGER,
catmPVclSegCCRangeStatusUpStart TimeStamp,
catmPVclSegCCRangeStatusUpEnd TimeStamp
}
catmPVclSegCCUpLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
Segment CC OAM recovery has been detected in the last
corresponding notification ."
::= { catmSegCCStatusUpPVclRangeEntry 1 }
catmPVclSegCCUpHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
Segment CC OAM recovery has been detected in the last
corresponding notification ."
::= { catmSegCCStatusUpPVclRangeEntry 2 }
catmPVclSegCCRangeStatusUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first Segment CC OAM recovery
is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmSegCCStatusUpPVclRangeEntry 3 }
catmPVclSegCCRangeStatusUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last Segment CC OAM recovery
is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmSegCCStatusUpPVclRangeEntry 4 }
catmEndCCStatusUpPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmEndCCStatusUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and End-to-End CC OAM status to have detected as recovered
in the last corresponding PVC notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 12 }
catmEndCCStatusUpPVclRangeEntry OBJECT-TYPE
SYNTAX CatmEndCCStatusUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and End-to-End CC OAM status
to have detected as recovered in the last notification
interval."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmEndCCStatusUpPVclRangeTable 1 }
CatmEndCCStatusUpPVclRangeEntry ::= SEQUENCE {
catmPVclEndCCUpLowerRangeValue INTEGER,
catmPVclEndCCUpHigherRangeValue INTEGER,
catmPVclEndCCRangeStatusUpStart TimeStamp,
catmPVclEndCCRangeStatusUpEnd TimeStamp
}
catmPVclEndCCUpLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
End-to-End CC OAM recovery has been detected in the last
corresponding notification ."
::= { catmEndCCStatusUpPVclRangeEntry 1 }
catmPVclEndCCUpHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
End-to-End CC OAM recovery has been detected in the last
corresponding notification ."
::= { catmEndCCStatusUpPVclRangeEntry 2 }
catmPVclEndCCRangeStatusUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first End-to-End CC OAM recovery
is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmEndCCStatusUpPVclRangeEntry 3 }
catmPVclEndCCRangeStatusUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last End-to-End CC OAM recovery
is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmEndCCStatusUpPVclRangeEntry 4 }
catmAISRDIStatusUpPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmAISRDIStatusUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and AISRDI OAM status to have detected as recovered
in the last corresponding PVC notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 13 }
catmAISRDIStatusUpPVclRangeEntry OBJECT-TYPE
SYNTAX CatmAISRDIStatusUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and AISRDI OAM status
to have detected as recovered in the last notification
interval."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmAISRDIStatusUpPVclRangeTable 1 }
CatmAISRDIStatusUpPVclRangeEntry ::= SEQUENCE {
catmPVclAISRDIUpLowerRangeValue INTEGER,
catmPVclAISRDIUpHigherRangeValue INTEGER,
catmPVclAISRDIRangeStatusUpStart TimeStamp,
catmPVclAISRDIRangeStatusUpEnd TimeStamp
}
catmPVclAISRDIUpLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
AISRDI OAM recovery has been detected in the last
corresponding notification ."
::= { catmAISRDIStatusUpPVclRangeEntry 1 }
catmPVclAISRDIUpHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
AISRDI OAM recovery has been detected in the last
corresponding notification ."
::= { catmAISRDIStatusUpPVclRangeEntry 2 }
catmPVclAISRDIRangeStatusUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first AISRDI OAM recovery
is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmAISRDIStatusUpPVclRangeEntry 3 }
catmPVclAISRDIRangeStatusUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last AISRDI OAM recovery
is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmAISRDIStatusUpPVclRangeEntry 4 }
catmSegAISRDIStatUpPVclRngeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmSegAISRDIStatUpPVclRngeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the range of configured PVCs for which
segment AIS/RDI recovery is detected and which are in the
segment AIS/RDI recovered state. It also gives the information
about the timestamp at which the the first and last segment
AIS/RDI recovery is detected for the range of PVCs."
::= { ciscoAtmPvcTrapExtnMIBObjects 17 }
catmSegAISRDIStatUpPVclRngeEntry OBJECT-TYPE
SYNTAX CatmSegAISRDIStatUpPVclRngeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of PVC and segment AIS/RDI OAM
status to have detected as recovered and is presently in
the segment AIS/RDI recovered state."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmSegAISRDIStatUpPVclRngeTable 1 }
CatmSegAISRDIStatUpPVclRngeEntry ::= SEQUENCE {
catmPVclSegAISRDIUpLowerRangeVal Unsigned32,
catmPVclSegAISRDIUpHigherRngeVal Unsigned32,
catmPVclSegAISRDIRngeStatUpStart TimeStamp,
catmPVclSegAISRDIRangeStatUpEnd TimeStamp
}
catmPVclSegAISRDIUpLowerRangeVal OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
Segment AISRDI OAM recovery has been detected in the
last corresponding notification ."
::= { catmSegAISRDIStatUpPVclRngeEntry 1 }
catmPVclSegAISRDIUpHigherRngeVal OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
Segment AISRDI OAM recovery has been detected in the
last corresponding notification ."
::= { catmSegAISRDIStatUpPVclRngeEntry 2 }
catmPVclSegAISRDIRngeStatUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first Segment AISRDI
OAM recovery is detected on any of the PVCLs in the
range in the last corresponding notification ."
::= { catmSegAISRDIStatUpPVclRngeEntry 3 }
catmPVclSegAISRDIRangeStatUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last Segment AISRDI OAM
recovery is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmSegAISRDIStatUpPVclRngeEntry 4 }
catmEndAISRDIStatUpPVclRngeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmEndAISRDIStatUpPVclRngeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the range of configured PVCs for which
end AIS/RDI recovery is detected and which are in the
end AIS/RDI recovered state. It also gives the information
about the timestamp at which the the first and last end
AIS/RDI recovery is detected for the range of PVCs."
::= { ciscoAtmPvcTrapExtnMIBObjects 18 }
catmEndAISRDIStatUpPVclRngeEntry OBJECT-TYPE
SYNTAX CatmEndAISRDIStatUpPVclRngeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of PVC and End AIS/RDI OAM status
to have detected as recovered and is presently in
the end AIS/RDI recovered state."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmEndAISRDIStatUpPVclRngeTable 1 }
CatmEndAISRDIStatUpPVclRngeEntry ::= SEQUENCE {
catmPVclEndAISRDIUpLowerRangeVal Unsigned32,
catmPVclEndAISRDIUpHigherRngeVal Unsigned32,
catmPVclEndAISRDIRngeStatUpStart TimeStamp,
catmPVclEndAISRDIRangeStatUpEnd TimeStamp
}
catmPVclEndAISRDIUpLowerRangeVal OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
End AISRDI OAM recovery has been detected in the
last corresponding notification ."
::= { catmEndAISRDIStatUpPVclRngeEntry 1 }
catmPVclEndAISRDIUpHigherRngeVal OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
End AISRDI OAM recovery has been detected in the
last corresponding notification ."
::= { catmEndAISRDIStatUpPVclRngeEntry 2 }
catmPVclEndAISRDIRngeStatUpStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first End AISRDI
OAM recovery is detected on any of the PVCLs in the
range in the last corresponding notification ."
::= { catmEndAISRDIStatUpPVclRngeEntry 3 }
catmPVclEndAISRDIRangeStatUpEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last End AISRDI OAM
recovery is detected on any of the PVCLs in the range
in the last corresponding notification ."
::= { catmEndAISRDIStatUpPVclRngeEntry 4 }
catmUpPVclRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CatmUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table indicating more than one VCLs in a consecutive
range and for each VCL there is an active row in the
atmVclTable having an atmVclConnKind value of `pvc'
and atmVclOperStatus to have detected as Up
in the last corresponding PVC notification ."
::= { ciscoAtmPvcTrapExtnMIBObjects 14 }
catmUpPVclRangeEntry OBJECT-TYPE
SYNTAX CatmUpPVclRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents a range of VCLs and
for each VCL there is an active row in the atmVclTable having
an atmVclConnKind value of 'pvc' and atmVclOperStatus to
have detected as Up in the last notification
interval."
INDEX { ifIndex, atmVclVpi, catmStatusChangePVclRangeIndex }
::= { catmUpPVclRangeTable 1 }
CatmUpPVclRangeEntry ::= SEQUENCE {
catmUpPVclLowerRangeValue INTEGER,
catmUpPVclHigherRangeValue INTEGER,
catmUpPVclRangeStart TimeStamp,
catmUpPVclRangeEnd TimeStamp,
catmPrevDownPVclRangeStart TimeStamp,
catmPrevDownPVclRangeEnd TimeStamp,
catmPVclRangeRecoveryReason CatmOAMRecoveryType
}
catmUpPVclLowerRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first PVCL in a range of PVCLs for which the
atmVclOperStatus has been detected as Up in the
corresponding notification ."
::= { catmUpPVclRangeEntry 1 }
catmUpPVclHigherRangeValue OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last PVCL in a range of PVCLs for which the
atmVclOperStatus has been detected as Up in the
corresponding notification ."
::= { catmUpPVclRangeEntry 2 }
catmUpPVclRangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first atmVclOperStatus
is detected as Up on any of the PVCLs in the range
in the corresponding notification ."
::= { catmUpPVclRangeEntry 3 }
catmUpPVclRangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last atmVclOperStatus
is detected as Up on any of the PVCLs in the range
in the corresponding notification ."
::= { catmUpPVclRangeEntry 4 }
catmPrevDownPVclRangeStart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the first atmVclOperStatus
is detected as Down on any of the PVCLs in the range
in the previous catmIntfPvcDownTrap notification."
::= { catmUpPVclRangeEntry 5 }
catmPrevDownPVclRangeEnd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time stamp at which the last atmVclOperStatus
is detected as Down on any of the PVCLs in the range
in the previous catmIntfPvcDownTrap notification."
::= { catmUpPVclRangeEntry 6 }
catmPVclRangeRecoveryReason OBJECT-TYPE
SYNTAX CatmOAMRecoveryType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of OAM Recovered"
::= { catmUpPVclRangeEntry 7 }
-- Notifications
cAtmPvcTrapExtnMIBNotifPrefix OBJECT IDENTIFIER ::=
{ ciscoAtmPvcTrapExtnMIB 2 }
cAtmPvcTrapExtnMIBNotif OBJECT IDENTIFIER ::=
{ cAtmPvcTrapExtnMIBNotifPrefix 0 }
catmIntfPvcUpTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfCurrentlyDownToUpPVcls }
STATUS deprecated
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has changed state back to 'up'
since the last catmIntfPvcUpTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 1 }
catmIntfPvcOAMFailureTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfOAMFailedPVcls,
catmIntfCurrentOAMFailingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has OAM loop back failed
since the last catmIntfPvcOAMFailuresTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 2 }
catmIntfPvcSegCCOAMFailureTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfSegCCOAMFailedPVcls,
catmIntfCurSegCCOAMFailingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has Segment CC OAM failure
since the last catmIntfPvcSegCCOAMFailureTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 3 }
catmIntfPvcEndCCOAMFailureTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfEndCCOAMFailedPVcls,
catmIntfCurEndCCOAMFailingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has End-to-End CC OAM failure
since the last catmIntfPvcEndCCOAMFailureTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 4 }
catmIntfPvcAISRDIOAMFailureTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfAISRDIOAMFailedPVcls,
catmIntfCurAISRDIOAMFailingPVcls }
STATUS deprecated
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has AIS RDI OAM failure
since the last catmIntfPvcAISRDIOAMFailureTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 5 }
catmIntfPvcAnyOAMFailureTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfAnyOAMFailedPVcls,
catmIntfCurAnyOAMFailingPVcls,
catmIntfTypeOfOAMFailure }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has one or more OAM failed
since the last catmIntfPvcAnyOAMFailureTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 6 }
catmIntfPvcOAMRecoverTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfOAMRcovedPVcls,
catmIntfCurrentOAMRcovingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has OAM loop back recovered
since the last catmIntfPvcOAMRecoversTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 7 }
catmIntfPvcSegCCOAMRecoverTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfSegCCOAMRcovedPVcls,
catmIntfCurSegCCOAMRcovingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has Segment CC OAM recovery
since the last catmIntfPvcSegCCOAMRecoverTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 8 }
catmIntfPvcEndCCOAMRecoverTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfEndCCOAMRcovedPVcls,
catmIntfCurEndCCOAMRcovingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has End-to-End CC OAM recovery
since the last catmIntfPvcEndCCOAMRecoverTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 9 }
catmIntfPvcAISRDIOAMRecoverTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfAISRDIOAMRcovedPVcls,
catmIntfCurAISRDIOAMRcovingPVcls }
STATUS deprecated
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has AIS RDI OAM recovery
since the last catmIntfPvcAISRDIOAMRecoverTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 10 }
catmIntfPvcAnyOAMRecoverTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfAnyOAMRcovedPVcls,
catmIntfCurAnyOAMRcovingPVcls,
catmIntfTypeOfOAMRecover }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has one or more OAM recovered
since the last catmIntfPvcAnyOAMRecoverTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 11 }
catmIntfPvcUp2Trap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfCurrentlyDownToUpPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has changed state back to 'up'
since the last catmIntfPvcUp2Trap was sent."
::= { cAtmPvcTrapExtnMIBNotif 12 }
catmIntfPvcDownTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
atmIntfPvcFailures,
atmIntfCurrentlyFailingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has changed state back to 'down'
since the last catmIntfPvcDownTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 13 }
catmIntfPvcSegAISRDIFailureTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfSegAISRDIFailedPVcls,
catmIntfCurSegAISRDIFailingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has segment AIS/RDI OAM failure
since the last catmIntfPvcSegAISRDIFailureTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 14 }
catmIntfPvcEndAISRDIFailureTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfEndAISRDIFailedPVcls,
catmIntfCurEndAISRDIFailingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has end AIS/RDI OAM failure
since the last catmIntfPvcEndAISRDIFailureTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 15 }
catmIntfPvcSegAISRDIRecoverTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfSegAISRDIRcovedPVcls,
catmIntfCurSegAISRDIRcovingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has segment AIS/RDI OAM recovery
since the last catmIntfPvcSegAISRDIRecoverTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 16 }
catmIntfPvcEndAISRDIRecoverTrap NOTIFICATION-TYPE
OBJECTS { ifIndex,
catmIntfEndAISRDIRcovedPVcls,
catmIntfCurEndAISRDIRcovingPVcls }
STATUS current
DESCRIPTION
"A notification indicating that one or more
PVCLs on this interface has end AIS/RDI OAM recovery
since the last catmIntfPvcEndAISRDIRecoverTrap was sent."
::= { cAtmPvcTrapExtnMIBNotif 17 }
-- Conformance
ciscoAtmPvcTrapExtnMIBConformance OBJECT IDENTIFIER ::=
{ ciscoAtmPvcTrapExtnMIB 3 }
ciscoAtmPvcTrapExtnMIBCompliances OBJECT IDENTIFIER ::=
{ ciscoAtmPvcTrapExtnMIBConformance 1 }
ciscoAtmPvcTrapExtnMIBGroups OBJECT IDENTIFIER ::=
{ ciscoAtmPvcTrapExtnMIBConformance 2 }
-- Compliance Statement
ciscoAtmPvcTrapExtnMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities
which implement this extended pvc traps."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmPvcTrapExtnGroup,
ciscoAtmPvcTrapExtnNotifGroup }
::= { ciscoAtmPvcTrapExtnMIBCompliances 1 }
ciscoAtmPvcTrapExtnMIBCompliance1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities
which implement this extended pvc traps."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmPvcTrapExtnGroup,
ciscoAtmPvcTrapExtnNotifGroup1 }
::= { ciscoAtmPvcTrapExtnMIBCompliances 2 }
ciscoAtmPvcTrapExtnMIBCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities
which implement this extended pvc traps."
MODULE -- this module
MANDATORY-GROUPS { ciscoAtmPvcTrapExtnGroup1,
ciscoAtmPvcTrapExtnNotifGroup2 }
::= { ciscoAtmPvcTrapExtnMIBCompliances 3 }
-- units of conformance:
ciscoAtmPvcTrapExtnGroup OBJECT-GROUP
OBJECTS {
catmIntfOAMFailedPVcls,
catmIntfCurrentOAMFailingPVcls,
catmIntfSegCCOAMFailedPVcls,
catmIntfCurSegCCOAMFailingPVcls,
catmIntfEndCCOAMFailedPVcls,
catmIntfCurEndCCOAMFailingPVcls,
catmIntfAISRDIOAMFailedPVcls,
catmIntfCurAISRDIOAMFailingPVcls,
catmIntfAnyOAMFailedPVcls,
catmIntfCurAnyOAMFailingPVcls,
catmIntfTypeOfOAMFailure,
catmIntfCurrentlyDownToUpPVcls,
catmPVclLowerRangeValue,
catmPVclHigherRangeValue,
catmPVclRangeStatusChangeStart,
catmPVclRangeStatusChangeEnd,
catmPVclStatusTransition,
catmPVclStatusChangeStart,
catmPVclStatusChangeEnd,
catmPVclSegCCLowerRangeValue,
catmPVclSegCCHigherRangeValue,
catmPVclSegCCRangeStatusChStart,
catmPVclSegCCRangeStatusChEnd,
catmPVclSegCCStatusTransition,
catmPVclSegCCStatusChangeStart,
catmPVclSegCCStatusChangeEnd,
catmPVclEndCCLowerRangeValue,
catmPVclEndCCHigherRangeValue,
catmPVclEndCCRangeStatusChStart,
catmPVclEndCCRangeStatusChEnd,
catmPVclEndCCStatusTransition,
catmPVclEndCCStatusChangeStart,
catmPVclEndCCStatusChangeEnd,
catmPVclAISRDILowerRangeValue,
catmPVclAISRDIHigherRangeValue,
catmPVclAISRDIRangeStatusChStart,
catmPVclAISRDIRangeStatusChEnd,
catmPVclAISRDIStatusTransition,
catmPVclAISRDIStatusChangeStart,
catmPVclAISRDIStatusChangeEnd,
catmIntfOAMRcovedPVcls,
catmIntfCurrentOAMRcovingPVcls,
catmIntfSegCCOAMRcovedPVcls,
catmIntfCurSegCCOAMRcovingPVcls,
catmIntfEndCCOAMRcovedPVcls,
catmIntfCurEndCCOAMRcovingPVcls,
catmIntfAISRDIOAMRcovedPVcls,
catmIntfCurAISRDIOAMRcovingPVcls,
catmIntfAnyOAMRcovedPVcls,
catmIntfCurAnyOAMRcovingPVcls,
catmIntfTypeOfOAMRecover,
catmPVclCurFailTime,
catmPVclPrevRecoverTime,
catmPVclFailureReason,
catmDownPVclLowerRangeValue,
catmDownPVclHigherRangeValue,
catmDownPVclRangeStart,
catmDownPVclRangeEnd,
catmPrevUpPVclRangeStart,
catmPrevUpPVclRangeEnd,
catmPVclRangeFailureReason,
catmPVclStatusUpTransition,
catmPVclStatusUpStart,
catmPVclStatusUpEnd,
catmPVclSegCCStatusUpTransition,
catmPVclSegCCStatusUpStart,
catmPVclSegCCStatusUpEnd,
catmPVclEndCCStatusUpTransition,
catmPVclEndCCStatusUpStart,
catmPVclEndCCStatusUpEnd,
catmPVclAISRDIStatusUpTransition,
catmPVclAISRDIStatusUpStart,
catmPVclAISRDIStatusUpEnd,
catmPVclCurRecoverTime,
catmPVclPrevFailTime,
catmPVclRecoveryReason,
catmPVclUpLowerRangeValue,
catmPVclUpHigherRangeValue,
catmPVclRangeStatusUpStart,
catmPVclRangeStatusUpEnd,
catmPVclSegCCUpLowerRangeValue,
catmPVclSegCCUpHigherRangeValue,
catmPVclSegCCRangeStatusUpStart,
catmPVclSegCCRangeStatusUpEnd,
catmPVclEndCCUpLowerRangeValue,
catmPVclEndCCUpHigherRangeValue,
catmPVclEndCCRangeStatusUpStart,
catmPVclEndCCRangeStatusUpEnd,
catmPVclAISRDIUpLowerRangeValue,
catmPVclAISRDIUpHigherRangeValue,
catmPVclAISRDIRangeStatusUpStart,
catmPVclAISRDIRangeStatusUpEnd,
catmUpPVclLowerRangeValue,
catmUpPVclHigherRangeValue,
catmUpPVclRangeStart,
catmUpPVclRangeEnd,
catmPrevDownPVclRangeStart,
catmPrevDownPVclRangeEnd,
catmPVclRangeRecoveryReason
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing
parameters for extended pvc traps."
::= { ciscoAtmPvcTrapExtnMIBGroups 1 }
ciscoAtmPvcTrapExtnGroup1 OBJECT-GROUP
OBJECTS {
catmIntfOAMFailedPVcls,
catmIntfCurrentOAMFailingPVcls,
catmIntfSegCCOAMFailedPVcls,
catmIntfCurSegCCOAMFailingPVcls,
catmIntfEndCCOAMFailedPVcls,
catmIntfCurEndCCOAMFailingPVcls,
catmIntfAISRDIOAMFailedPVcls,
catmIntfCurAISRDIOAMFailingPVcls,
catmIntfAnyOAMFailedPVcls,
catmIntfCurAnyOAMFailingPVcls,
catmIntfTypeOfOAMFailure,
catmIntfCurrentlyDownToUpPVcls,
catmPVclLowerRangeValue,
catmPVclHigherRangeValue,
catmPVclRangeStatusChangeStart,
catmPVclRangeStatusChangeEnd,
catmPVclStatusTransition,
catmPVclStatusChangeStart,
catmPVclStatusChangeEnd,
catmPVclSegCCLowerRangeValue,
catmPVclSegCCHigherRangeValue,
catmPVclSegCCRangeStatusChStart,
catmPVclSegCCRangeStatusChEnd,
catmPVclSegCCStatusTransition,
catmPVclSegCCStatusChangeStart,
catmPVclSegCCStatusChangeEnd,
catmPVclEndCCLowerRangeValue,
catmPVclEndCCHigherRangeValue,
catmPVclEndCCRangeStatusChStart,
catmPVclEndCCRangeStatusChEnd,
catmPVclEndCCStatusTransition,
catmPVclEndCCStatusChangeStart,
catmPVclEndCCStatusChangeEnd,
catmPVclAISRDILowerRangeValue,
catmPVclAISRDIHigherRangeValue,
catmPVclAISRDIRangeStatusChStart,
catmPVclAISRDIRangeStatusChEnd,
catmPVclAISRDIStatusTransition,
catmPVclAISRDIStatusChangeStart,
catmPVclAISRDIStatusChangeEnd,
catmIntfOAMRcovedPVcls,
catmIntfCurrentOAMRcovingPVcls,
catmIntfSegCCOAMRcovedPVcls,
catmIntfCurSegCCOAMRcovingPVcls,
catmIntfEndCCOAMRcovedPVcls,
catmIntfCurEndCCOAMRcovingPVcls,
catmIntfAISRDIOAMRcovedPVcls,
catmIntfCurAISRDIOAMRcovingPVcls,
catmIntfAnyOAMRcovedPVcls,
catmIntfCurAnyOAMRcovingPVcls,
catmIntfTypeOfOAMRecover,
catmPVclCurFailTime,
catmPVclPrevRecoverTime,
catmPVclFailureReason,
catmDownPVclLowerRangeValue,
catmDownPVclHigherRangeValue,
catmDownPVclRangeStart,
catmDownPVclRangeEnd,
catmPrevUpPVclRangeStart,
catmPrevUpPVclRangeEnd,
catmPVclRangeFailureReason,
catmPVclStatusUpTransition,
catmPVclStatusUpStart,
catmPVclStatusUpEnd,
catmPVclSegCCStatusUpTransition,
catmPVclSegCCStatusUpStart,
catmPVclSegCCStatusUpEnd,
catmPVclEndCCStatusUpTransition,
catmPVclEndCCStatusUpStart,
catmPVclEndCCStatusUpEnd,
catmPVclAISRDIStatusUpTransition,
catmPVclAISRDIStatusUpStart,
catmPVclAISRDIStatusUpEnd,
catmPVclCurRecoverTime,
catmPVclPrevFailTime,
catmPVclRecoveryReason,
catmPVclUpLowerRangeValue,
catmPVclUpHigherRangeValue,
catmPVclRangeStatusUpStart,
catmPVclRangeStatusUpEnd,
catmPVclSegCCUpLowerRangeValue,
catmPVclSegCCUpHigherRangeValue,
catmPVclSegCCRangeStatusUpStart,
catmPVclSegCCRangeStatusUpEnd,
catmPVclEndCCUpLowerRangeValue,
catmPVclEndCCUpHigherRangeValue,
catmPVclEndCCRangeStatusUpStart,
catmPVclEndCCRangeStatusUpEnd,
catmPVclAISRDIUpLowerRangeValue,
catmPVclAISRDIUpHigherRangeValue,
catmPVclAISRDIRangeStatusUpStart,
catmPVclAISRDIRangeStatusUpEnd,
catmUpPVclLowerRangeValue,
catmUpPVclHigherRangeValue,
catmUpPVclRangeStart,
catmUpPVclRangeEnd,
catmPrevDownPVclRangeStart,
catmPrevDownPVclRangeEnd,
catmPVclRangeRecoveryReason,
catmIntfSegAISRDIFailedPVcls,
catmIntfCurSegAISRDIFailingPVcls,
catmIntfEndAISRDIFailedPVcls,
catmIntfCurEndAISRDIFailingPVcls,
catmIntfSegAISRDIRcovedPVcls,
catmIntfCurSegAISRDIRcovingPVcls,
catmIntfEndAISRDIRcovedPVcls,
catmIntfCurEndAISRDIRcovingPVcls,
catmPVclSegAISRDIStatTransition,
catmPVclSegAISRDIStatChangeStart,
catmPVclSegAISRDIStatChangeEnd,
catmPVclEndAISRDIStatTransition,
catmPVclEndAISRDIStatChangeStart,
catmPVclEndAISRDIStatChangeEnd,
catmPVclSegAISRDILowerRangeValue,
catmPVclSegAISRDIHigherRangeValue,
catmPVclSegAISRDIRangeStatChStart,
catmPVclSegAISRDIRangeStatChEnd,
catmPVclEndAISRDILowerRangeValue,
catmPVclEndAISRDIHigherRngeValue,
catmPVclEndAISRDIRngeStatChStart,
catmPVclEndAISRDIRangeStatChEnd,
catmPVclSegAISRDIStatUpTransit,
catmPVclSegAISRDIStatUpStart,
catmPVclSegAISRDIStatUpEnd,
catmPVclEndAISRDIStatUpTransit,
catmPVclEndAISRDIStatUpStart,
catmPVclEndAISRDIStatUpEnd,
catmPVclSegAISRDIUpLowerRangeVal,
catmPVclSegAISRDIUpHigherRngeVal,
catmPVclSegAISRDIRngeStatUpStart,
catmPVclSegAISRDIRangeStatUpEnd,
catmPVclEndAISRDIUpLowerRangeVal,
catmPVclEndAISRDIUpHigherRngeVal,
catmPVclEndAISRDIRngeStatUpStart,
catmPVclEndAISRDIRangeStatUpEnd
}
STATUS current
DESCRIPTION
"A collection of objects providing
parameters for extended pvc traps."
::= { ciscoAtmPvcTrapExtnMIBGroups 5 }
ciscoAtmPvcTrapExtnNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
catmIntfPvcUpTrap,
catmIntfPvcOAMFailureTrap,
catmIntfPvcSegCCOAMFailureTrap,
catmIntfPvcEndCCOAMFailureTrap,
catmIntfPvcAISRDIOAMFailureTrap,
catmIntfPvcAnyOAMFailureTrap
}
STATUS deprecated
DESCRIPTION
"A collection of objects used as
notifications for extended pvc traps."
::= { ciscoAtmPvcTrapExtnMIBGroups 2 }
ciscoAtmPvcTrapExtnNotifGroup1 NOTIFICATION-GROUP
NOTIFICATIONS {
catmIntfPvcOAMFailureTrap,
catmIntfPvcSegCCOAMFailureTrap,
catmIntfPvcEndCCOAMFailureTrap,
catmIntfPvcAISRDIOAMFailureTrap,
catmIntfPvcAnyOAMFailureTrap,
catmIntfPvcOAMRecoverTrap,
catmIntfPvcSegCCOAMRecoverTrap,
catmIntfPvcEndCCOAMRecoverTrap,
catmIntfPvcAISRDIOAMRecoverTrap,
catmIntfPvcAnyOAMRecoverTrap ,
catmIntfPvcUp2Trap,
catmIntfPvcDownTrap
}
STATUS deprecated
DESCRIPTION
"A collection of objects used as
notifications for extended pvc traps."
::= { ciscoAtmPvcTrapExtnMIBGroups 3 }
ciscoAtmPvcTrapExtnNotifGroup2 NOTIFICATION-GROUP
NOTIFICATIONS {
catmIntfPvcOAMFailureTrap,
catmIntfPvcSegCCOAMFailureTrap,
catmIntfPvcEndCCOAMFailureTrap,
catmIntfPvcAnyOAMFailureTrap,
catmIntfPvcOAMRecoverTrap,
catmIntfPvcSegCCOAMRecoverTrap,
catmIntfPvcEndCCOAMRecoverTrap,
catmIntfPvcAnyOAMRecoverTrap ,
catmIntfPvcUp2Trap,
catmIntfPvcDownTrap,
catmIntfPvcSegAISRDIFailureTrap,
catmIntfPvcEndAISRDIFailureTrap,
catmIntfPvcSegAISRDIRecoverTrap,
catmIntfPvcEndAISRDIRecoverTrap
}
STATUS current
DESCRIPTION
"A collection of objects used as
notifications for extended pvc traps."
::= { ciscoAtmPvcTrapExtnMIBGroups 4 }
END
View Git Blame Copy Permalink