1845 lines
68 KiB
Plaintext
1845 lines
68 KiB
Plaintext
-- This file was included in WWP MIB release 04-10-01-0027
|
|
--
|
|
-- WWP-LEOS-TRAFFIC-PROFILE-MIB.my
|
|
--
|
|
|
|
WWP-LEOS-TRAFFIC-PROFILE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Integer32, Unsigned32, Counter32, Counter64, IpAddress, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
RowStatus, DisplayString, MacAddress, TruthValue
|
|
FROM SNMPv2-TC
|
|
wwpModules, wwpModulesLeos
|
|
FROM WWP-SMI;
|
|
|
|
wwpLeosTrafficProfileMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201107070000Z"
|
|
ORGANIZATION "Ciena, Inc"
|
|
CONTACT-INFO
|
|
" Mib Meister
|
|
115 North Sullivan Road
|
|
Spokane Valley, WA 99037
|
|
USA
|
|
Phone: +1 509 242 9000
|
|
Email: support@ciena.com"
|
|
DESCRIPTION
|
|
"Added objects wwpLeosTrafficProfileStdHCAcceptedBytes and wwpLeosTrafficProfileStdHCDroppedBytes."
|
|
REVISION "201107070000Z"
|
|
DESCRIPTION
|
|
"Added classifier mode under the wwpLeosTrafficProfilePortEntry.
|
|
Added wwpLeosTrafficProfileStdUntaggedState under WwpLeosTrafficProfileStdEntry"
|
|
REVISION "201103271700Z"
|
|
DESCRIPTION
|
|
"Added modes hierarchicalVlan(12), hierarchicalPort(13) to wwpLeosTrafficProfileMode
|
|
under wwpLeosTrafficProfilePortEntry.
|
|
Added wwpLeosTrafficProfileStdDefaultProfile, wwpLeosTrafficProfileStdDrop,
|
|
wwpLeosTrafficProfileStdParentIndex, wwpLeosTrafficProfileStdChildMode under wwpLeosTrafficProfileStdTable"
|
|
REVISION "200908251700Z"
|
|
DESCRIPTION
|
|
"Added modes stdVlanDot1dPri, stdVlanIpp, stdDscp to wwpLeosTrafficProfileMode under wwpLeosTrafficProfilePortEntry.
|
|
Added objects wwpLeosTrafficProfileStdCbs, wwpLeosTrafficProfileEbs, wwpLeosTrafficProfileStdDscpRemarkPolicy,
|
|
wwpLeosTrafficProfileStdFixedDscp to wwpLeosTrafficProfileStdEntryTable"
|
|
REVISION "200811141700Z"
|
|
DESCRIPTION
|
|
"Added wwpLeosTrafficProfileMeterPoolTable under wwpLeosTrafficProfile
|
|
wwpLeosTrafficProfileStdIndx mib object value has been changed from 1..32 to 1..64
|
|
Added wwpLeosTrafficProfileMeterPool mib object under wwpLeosTrafficProfilePortEntry."
|
|
REVISION "200807281700Z"
|
|
DESCRIPTION
|
|
"Added additional trafficPorfileMode stdDscp.
|
|
Profile Index changed for following mib object from 1 through 8 to 1 through 32
|
|
wwpLeosTrafficProfileStdIndx,
|
|
wwpLeosTrafficProfileStdDot1dTpProfile,
|
|
wwpLeosTrafficProfileStdIpPrecToProfile,
|
|
wwpLeosTrafficProfileStdPhbToProfile.
|
|
Added new wwpLeosTrafficProfileStdDscpTable.
|
|
Added new wwpLeosTrafficProfileStdVlanTable."
|
|
REVISION "200806281700Z"
|
|
DESCRIPTION
|
|
"added value in cascaded enumerations for deprecated values"
|
|
REVISION "200806161700Z"
|
|
DESCRIPTION
|
|
"added entries related to tos-stamping"
|
|
REVISION "200806131700Z"
|
|
DESCRIPTION
|
|
"changed description of entries relating to cascaded profiling"
|
|
REVISION "200806041700Z"
|
|
DESCRIPTION
|
|
"deprecated all entries related to cascaded traffic profiling."
|
|
REVISION "200805211700Z"
|
|
DESCRIPTION
|
|
"Added Total Statistics."
|
|
REVISION "200805151700Z"
|
|
DESCRIPTION
|
|
"The MIB module for the WWP leos traffic profiling specific information."
|
|
REVISION "200104031700Z"
|
|
DESCRIPTION
|
|
"Initial creation."
|
|
::= { wwpModulesLeos 27 }
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
wwpLeosTrafficProfileObjects OBJECT IDENTIFIER ::= { wwpLeosTrafficProfileMIB 1 }
|
|
|
|
wwpLeosTrafficProfile OBJECT IDENTIFIER ::= { wwpLeosTrafficProfileObjects 1 }
|
|
|
|
-- Notifications
|
|
|
|
wwpLeosTrafficProfileNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosTrafficProfileMIB 2 }
|
|
wwpLeosTrafficProfileNotifications OBJECT IDENTIFIER ::= { wwpLeosTrafficProfileNotificationPrefix 0 }
|
|
|
|
-- Conformance information
|
|
|
|
wwpLeosTrafficProfileMIBConformance OBJECT IDENTIFIER ::= { wwpLeosTrafficProfileMIB 3 }
|
|
wwpLeosTrafficProfileMIBCompliances OBJECT IDENTIFIER ::= { wwpLeosTrafficProfileMIBConformance 1 }
|
|
wwpLeosTrafficProfileMIBGroups OBJECT IDENTIFIER ::= { wwpLeosTrafficProfileMIBConformance 2 }
|
|
|
|
-- global attributes for flow
|
|
wwpLeosTrafficProfileGlobalAttrs OBJECT IDENTIFIER ::= { wwpLeosTrafficProfile 1 }
|
|
|
|
--
|
|
-- Global Attributes
|
|
--
|
|
wwpLeosTrafficProfileGlobalState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to 'enabled' will enable traffic profile globally.
|
|
Setting this object to 'disabled' will disable traffic profile globally."
|
|
::= { wwpLeosTrafficProfileGlobalAttrs 1 }
|
|
|
|
wwpLeosTrafficProfileGlobalMeterProvisioningState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pir(1),
|
|
eir(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to 'pir' will allow meters to be provisioned in pir.
|
|
Setting this object to 'eir' will allow meters to be provisioned in eir."
|
|
::= { wwpLeosTrafficProfileGlobalAttrs 2 }
|
|
|
|
|
|
|
|
--
|
|
-- Traffic profiling on per port basis.
|
|
--
|
|
wwpLeosTrafficProfilePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfilePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of traffic profile port entries."
|
|
::= { wwpLeosTrafficProfile 2 }
|
|
|
|
wwpLeosTrafficProfilePortEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfilePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A traffic profile entry in the wwpLeosTrafficProfilePortTable."
|
|
INDEX { wwpLeosTrafficProfilePort }
|
|
::= { wwpLeosTrafficProfilePortTable 1 }
|
|
|
|
WwpLeosTrafficProfilePortEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfilePort INTEGER,
|
|
wwpLeosTrafficProfileAdminState INTEGER,
|
|
wwpLeosTrafficProfileOperState INTEGER,
|
|
wwpLeosTrafficProfileMode INTEGER,
|
|
wwpLeosTrafficProfileNonConformCascadedProfile INTEGER,
|
|
wwpLeosTrafficProfileNonConformStdProfile INTEGER,
|
|
wwpLeosTrafficProfileArpCascadedProfile INTEGER,
|
|
wwpLeosTrafficProfileArpStdProfile INTEGER,
|
|
wwpLeosTrafficProfileMeterPool INTEGER,
|
|
wwpLeosTrafficProfileClassifierMode INTEGER
|
|
}
|
|
|
|
wwpLeosTrafficProfilePort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the port number also used as index in
|
|
the table."
|
|
::= { wwpLeosTrafficProfilePortEntry 1 }
|
|
|
|
wwpLeosTrafficProfileAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to 'enabled' will administratively enable traffic profiling on the given port.
|
|
Setting this object to 'disabled' will administratively disable traffic profiling on the given port."
|
|
::= { wwpLeosTrafficProfilePortEntry 2 }
|
|
|
|
wwpLeosTrafficProfileOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies operational state of the traffic profiling for a given port
|
|
on the device."
|
|
::= { wwpLeosTrafficProfilePortEntry 3 }
|
|
|
|
wwpLeosTrafficProfileMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cascadedDot1dPri(1),
|
|
cascadedDscp(2),
|
|
cascadedIpPrec(3),
|
|
stdDot1(4),
|
|
stdDiffServ(5),
|
|
stdIpPrec(6),
|
|
stdVlan(7),
|
|
stdDscp(8),
|
|
stdVlanDot1DPri(9),
|
|
stdVlanIpp(10),
|
|
stdVlanDscp(11),
|
|
hierarchicalVlan(12),
|
|
hierarchicalPort(13),
|
|
none(14),
|
|
advanced(15)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the mode of traffic profiling for a given port."
|
|
::= { wwpLeosTrafficProfilePortEntry 4 }
|
|
|
|
wwpLeosTrafficProfileNonConformCascadedProfile OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
drop(0),
|
|
profile1(1),
|
|
profile2(2),
|
|
profile3(3),
|
|
deprecated(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies that the device should map non-conformance traffic ingressing
|
|
on a given port to cascaded profile specified by
|
|
wwpLeosTrafficProfileNonConformCascadedProfile. This object will become effective
|
|
only if device is running in cascaded profile mode. This object will be set to drop
|
|
if using on a device that does not have cascaded-profiling"
|
|
::= { wwpLeosTrafficProfilePortEntry 5 }
|
|
|
|
wwpLeosTrafficProfileNonConformStdProfile OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies that the device should map non-conformance traffic ingressing
|
|
on a given port to standard profile specified by
|
|
wwpLeosTrafficProfileNonConformStdProfile. This object will become effective
|
|
only if device is running in standard profile mode."
|
|
::= { wwpLeosTrafficProfilePortEntry 6 }
|
|
|
|
wwpLeosTrafficProfileArpCascadedProfile OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bypass(0),
|
|
profile1(1),
|
|
profile2(2),
|
|
profile3(3),
|
|
deprecated(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies that the device should map ARP frames ingressing
|
|
on a given port to cascaded profile specified by
|
|
wwpLeosTrafficProfileArpCascadedProfile. This object will be set to bypass
|
|
if using on a device that does not have cascaded-profiling."
|
|
::= { wwpLeosTrafficProfilePortEntry 7 }
|
|
|
|
wwpLeosTrafficProfileArpStdProfile OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies that the device should map ARP frames ingressing
|
|
on a given port to standard profile specified by
|
|
wwpLeosTrafficProfileArpStdProfile. This object will become effective
|
|
only if device is running in standard profile mode."
|
|
::= { wwpLeosTrafficProfilePortEntry 8 }
|
|
|
|
wwpLeosTrafficProfileMeterPool OBJECT-TYPE
|
|
SYNTAX INTEGER(1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Meter Pool Index for a port."
|
|
::= { wwpLeosTrafficProfilePortEntry 9}
|
|
|
|
|
|
wwpLeosTrafficProfileClassifierMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
narrow(1),
|
|
wide(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies how narrow or wide we classify traffic to a port's meters."
|
|
::= { wwpLeosTrafficProfilePortEntry 10}
|
|
|
|
|
|
--
|
|
-- Cascaded profile
|
|
--
|
|
wwpLeosTrafficProfileCascadedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileCascadedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of cascaded traffic profile entries.
|
|
To create an entry in this table the following criteria must be met.
|
|
- All indexes must be specified.
|
|
- wwpLeosTrafficProfileCascadedCir must be specified
|
|
- if wwpLeosTrafficProfileCascadedPir is not specified or is specified and is < wwpLeosTrafficProfileCascadedCir
|
|
then device will make wwpLeosTrafficProfileCascadedPir = wwpLeosTrafficProfileCascadedCir
|
|
- wwpLeosTrafficProfileCascadedStatus must be set to createandgo"
|
|
::= { wwpLeosTrafficProfile 3 }
|
|
|
|
wwpLeosTrafficProfileCascadedEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileCascadedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileCascadedIndx}
|
|
::= { wwpLeosTrafficProfileCascadedTable 1 }
|
|
|
|
WwpLeosTrafficProfileCascadedEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileCascadedIndx INTEGER,
|
|
wwpLeosTrafficProfileCascadedCir Integer32,
|
|
wwpLeosTrafficProfileCascadedPir Integer32,
|
|
wwpLeosTrafficProfileCascadedStatus RowStatus
|
|
}
|
|
|
|
wwpLeosTrafficProfileCascadedIndx OBJECT-TYPE
|
|
SYNTAX INTEGER (1..3)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used as index in the table and it represents
|
|
profile index which can be 1 or 2 or 3."
|
|
::= { wwpLeosTrafficProfileCascadedEntry 1 }
|
|
wwpLeosTrafficProfileCascadedCir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the cir associated with a given cascaded traffic profile.
|
|
Units are kbps."
|
|
::= { wwpLeosTrafficProfileCascadedEntry 2 }
|
|
|
|
wwpLeosTrafficProfileCascadedPir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the pir associated with a given cascaded traffic profile.
|
|
Units are kbps."
|
|
::= { wwpLeosTrafficProfileCascadedEntry 3 }
|
|
|
|
wwpLeosTrafficProfileCascadedStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Setting this object to 'createandgo' along with wwpLeosTrafficProfileCascadedCir
|
|
and wwpLeosTrafficProfileCascadedPir will result in creating an cascaded traffic profile entry.
|
|
Setting this object to 'destroy' will delete the entry from the table."
|
|
::= { wwpLeosTrafficProfileCascadedEntry 5 }
|
|
|
|
--
|
|
-- Std profile
|
|
--
|
|
wwpLeosTrafficProfileStdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Std traffic profile entries.
|
|
To create entry in this table following criteria must be met.
|
|
- All indexes must be specified.
|
|
- wwpLeosTrafficProfileStdCir must be specified
|
|
- if wwpLeosTrafficProfileStdPir is not specified or is specified and is < wwpLeosTrafficProfileStdCir
|
|
then device will make wwpLeosTrafficProfileStdPir = wwpLeosTrafficProfileStdCir
|
|
- wwpLeosTrafficProfileStdStatus must be set to createandgo"
|
|
::= { wwpLeosTrafficProfile 4 }
|
|
|
|
wwpLeosTrafficProfileStdEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard traffic profile entry in the wwpLeosTrafficProfileStdTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdIndx}
|
|
::= { wwpLeosTrafficProfileStdTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdIndx INTEGER,
|
|
wwpLeosTrafficProfileStdCir Integer32,
|
|
wwpLeosTrafficProfileStdPir Integer32,
|
|
wwpLeosTrafficProfileStdName DisplayString,
|
|
wwpLeosTrafficProfileStdStatus RowStatus,
|
|
wwpLeosTrafficProfileStdVlan INTEGER,
|
|
wwpLeosTrafficProfileStdCbs Unsigned32,
|
|
wwpLeosTrafficProfileStdEbs Unsigned32,
|
|
wwpLeosTrafficProfileStdDscpRemarkPolicy INTEGER,
|
|
wwpLeosTrafficProfileStdFixedDscp INTEGER,
|
|
wwpLeosTrafficProfileStdUnsetVlan INTEGER,
|
|
wwpLeosTrafficProfileStdDefaultProfile INTEGER,
|
|
wwpLeosTrafficeProfileStdDrop INTEGER,
|
|
wwpLeosTrafficProfileStdParentIndex Integer32,
|
|
wwpLeosTrafficProfileStdChildMode INTEGER,
|
|
wwpLeosTrafficProfileStdStatsMonitor INTEGER,
|
|
wwpLeosTrafficProfileStdUntaggedState INTEGER,
|
|
wwpLeosTrafficProfileStdVs DisplayString,
|
|
wwpLeosTrafficProfileStdRemarkColorPolicy INTEGER,
|
|
wwpLeosTrafficProfileStdRemarkRcosPolicy INTEGER,
|
|
wwpLeosTrafficProfileStdYellowRemarkRcos INTEGER,
|
|
wwpLeosTrafficProfileStdGreenRemarkRcos INTEGER,
|
|
wwpLeosTrafficProfileStdIngressColorAware INTEGER,
|
|
wwpLeosTrafficProfileStdEir Integer32
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdIndx OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used as index in the table and it represents
|
|
profile index which can be 1 through 64."
|
|
::= { wwpLeosTrafficProfileStdEntry 1 }
|
|
|
|
wwpLeosTrafficProfileStdCir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the cir associated with a given standard traffic profile."
|
|
::= { wwpLeosTrafficProfileStdEntry 2 }
|
|
|
|
wwpLeosTrafficProfileStdPir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the pir associated with a given standard traffic profile."
|
|
::= { wwpLeosTrafficProfileStdEntry 3 }
|
|
|
|
wwpLeosTrafficProfileStdName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..15))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name associated with this profile. This must be unique per port.
|
|
The name does not have to be set on create. However, when updating the name,
|
|
it must have some value - zero-string not support."
|
|
::= { wwpLeosTrafficProfileStdEntry 4 }
|
|
|
|
wwpLeosTrafficProfileStdStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to 'createandgo' along with wwpLeosTrafficProfileStdCir
|
|
and or wwpLeosTrafficProfileStdPir will result in creating an standard traffic profile entry.
|
|
Setting this object to 'destroy' will delete the entry from the table."
|
|
::= { wwpLeosTrafficProfileStdEntry 5 }
|
|
|
|
wwpLeosTrafficProfileStdVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the VLAN associated with a profile."
|
|
::= { wwpLeosTrafficProfileStdEntry 6 }
|
|
wwpLeosTrafficProfileStdCbs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Commited burst size associated with a given
|
|
standard traffic profile."
|
|
DEFVAL { 2 }
|
|
::= { wwpLeosTrafficProfileStdEntry 7 }
|
|
|
|
wwpLeosTrafficProfileStdEbs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Excess burst size associated with a given
|
|
standard traffic profile."
|
|
DEFVAL { 2 }
|
|
::= { wwpLeosTrafficProfileStdEntry 8 }
|
|
|
|
wwpLeosTrafficProfileStdDscpRemarkPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
leave(1),
|
|
fixed(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Leave => Don't remark the frame.
|
|
Fixed => Remark the DSCP of a frame with the fixed-dscp value for IP frames
|
|
which classify to the Traffic Profile"
|
|
::= { wwpLeosTrafficProfileStdEntry 9 }
|
|
|
|
wwpLeosTrafficProfileStdFixedDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fixed DSCP value to use for frames classifying to a Traffic Profile
|
|
when the dscp-remark-policy id 'Fixed"
|
|
::= { wwpLeosTrafficProfileStdEntry 10 }
|
|
|
|
wwpLeosTrafficProfileStdUnsetVlan OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
unset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting This object to unset(1) unsets the VLAN associated with a profile.
|
|
This object returns a value of none(0) on get."
|
|
::= { wwpLeosTrafficProfileStdEntry 11 }
|
|
|
|
wwpLeosTrafficProfileStdDefaultProfile OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to true(1) during createAndGo(4) will create Tier-1 default profile."
|
|
::= { wwpLeosTrafficProfileStdEntry 12 }
|
|
|
|
wwpLeosTrafficeProfileStdDrop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this value to true causes metering to cease and all traffic to drop."
|
|
::= { wwpLeosTrafficProfileStdEntry 13 }
|
|
|
|
wwpLeosTrafficProfileStdParentIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib object is set when creating Child traffic profile to specify the parent index"
|
|
::= { wwpLeosTrafficProfileStdEntry 14 }
|
|
|
|
wwpLeosTrafficProfileStdChildMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dot1dPri(1),
|
|
ipprec(2),
|
|
dscp(3),
|
|
vlan(4),
|
|
vlanCos(5),
|
|
none(99)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the port mode is hierarchical-vlan, then the valid child-modes are dot1dPri, ipprec, dscp.
|
|
When the port mode is hierarchical-port then the valid childModes is dot1dPri, ipprec, dscp and vlan(4)."
|
|
::= { wwpLeosTrafficProfileStdEntry 15}
|
|
|
|
|
|
wwpLeosTrafficProfileStdStatsMonitor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To disable stats collection, set this object to off(2).
|
|
To enable stats collection, set this object to on(1)."
|
|
::= { wwpLeosTrafficProfileStdEntry 16}
|
|
|
|
wwpLeosTrafficProfileStdUntaggedState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable this profile to match untagged traffic set this to on(1). To disable, set to off(2)"
|
|
::= { wwpLeosTrafficProfileStdEntry 17}
|
|
|
|
wwpLeosTrafficProfileStdVs OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..15))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The virtual-switch name associated with this profile. The virtual-switch name must
|
|
exist before using it as a profile classifier."
|
|
::= { wwpLeosTrafficProfileStdEntry 18 }
|
|
|
|
wwpLeosTrafficProfileStdRemarkColorPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
leave(1),
|
|
yellowRemarkToGreen(2),
|
|
greenRemarkToYellow(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the profile's color remarking policy at the meter output."
|
|
::= { wwpLeosTrafficProfileStdEntry 19}
|
|
|
|
wwpLeosTrafficProfileStdRemarkRcosPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
leave(1),
|
|
remarkGreen(2),
|
|
remarkYellow(3),
|
|
remarkBoth(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the profile's rcos remarking policy based on meter color."
|
|
::= { wwpLeosTrafficProfileStdEntry 20}
|
|
|
|
wwpLeosTrafficProfileStdYellowRemarkRcos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the profile's rcos remarking policy based on meter color."
|
|
::= { wwpLeosTrafficProfileStdEntry 21}
|
|
|
|
wwpLeosTrafficProfileStdGreenRemarkRcos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the profile's rcos remarking policy based on meter color."
|
|
::= { wwpLeosTrafficProfileStdEntry 22}
|
|
|
|
wwpLeosTrafficProfileStdIngressColorAware OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the profile's meter ingress color awareness."
|
|
::= { wwpLeosTrafficProfileStdEntry 23}
|
|
|
|
wwpLeosTrafficProfileStdEir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the eir associated with a given standard traffic profile.
|
|
Sets/Gets on this are only valid when the global meter-provisioning mode is set
|
|
to eir. All other times it will be ignored and return 0"
|
|
::= { wwpLeosTrafficProfileStdEntry 24 }
|
|
|
|
--
|
|
-- Std profile dot1d table
|
|
--
|
|
wwpLeosTrafficProfileStdDot1dTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdDot1dEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Std dot1d traffic profile entries.
|
|
To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdDot1dToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy."
|
|
::= { wwpLeosTrafficProfile 5 }
|
|
|
|
wwpLeosTrafficProfileStdDot1dEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdDot1dEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard dot1d traffic profile entry in the wwpLeosTrafficProfileStdDot1dTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdDot1d}
|
|
::= { wwpLeosTrafficProfileStdDot1dTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdDot1dEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdDot1d INTEGER,
|
|
wwpLeosTrafficProfileStdDot1dToProfile INTEGER,
|
|
wwpLeosTrafficProfileStdDot1dStatus RowStatus
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdDot1d OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the dot1d priority for the associated
|
|
standard profile entry in the wwpLeosTrafficProfileStdDot1dTable
|
|
table."
|
|
::= { wwpLeosTrafficProfileStdDot1dEntry 1 }
|
|
|
|
wwpLeosTrafficProfileStdDot1dToProfile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the profile to which wwpLeosTrafficProfileStdDot1d
|
|
must be mapped to."
|
|
::= { wwpLeosTrafficProfileStdDot1dEntry 2 }
|
|
|
|
wwpLeosTrafficProfileStdDot1dStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdDot1dToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy."
|
|
::= { wwpLeosTrafficProfileStdDot1dEntry 3 }
|
|
|
|
--
|
|
-- Std profile IP Prec table
|
|
--
|
|
wwpLeosTrafficProfileStdIpPrecTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdIpPrecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of standard ip precedence traffic profile entries.
|
|
To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdIpPrecStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdIpPrecToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdIpPrecStatus to destroy."
|
|
::= { wwpLeosTrafficProfile 6 }
|
|
|
|
wwpLeosTrafficProfileStdIpPrecEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdIpPrecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard ip precedence traffic profile entry in the wwpLeosTrafficProfileStdTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdIpPrec}
|
|
::= { wwpLeosTrafficProfileStdIpPrecTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdIpPrecEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdIpPrec INTEGER,
|
|
wwpLeosTrafficProfileStdIpPrecToProfile INTEGER,
|
|
wwpLeosTrafficProfileStdIpPrecStatus RowStatus
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdIpPrec OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the ip precedence for the associated
|
|
standard profile entry in wwpLeosTrafficProfileStdTable."
|
|
::= { wwpLeosTrafficProfileStdIpPrecEntry 1 }
|
|
|
|
wwpLeosTrafficProfileStdIpPrecToProfile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the profile to which wwpLeosTrafficProfileStdIpPrec
|
|
must be mapped to."
|
|
::= { wwpLeosTrafficProfileStdIpPrecEntry 2 }
|
|
|
|
wwpLeosTrafficProfileStdIpPrecStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdIpPrecStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdIpPrecToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdIpPrecStatus to destroy."
|
|
::= { wwpLeosTrafficProfileStdIpPrecEntry 3 }
|
|
|
|
--
|
|
-- Std profile phb table
|
|
--
|
|
wwpLeosTrafficProfileStdPhbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdPhbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of standard phb traffic profile entries.
|
|
To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdPhbStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdPhbToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdPhbStatus to destroy."
|
|
::= { wwpLeosTrafficProfile 7 }
|
|
|
|
wwpLeosTrafficProfileStdPhbEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdPhbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard Phb traffic profile entry in the wwpLeosTrafficProfileStdTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdPhb}
|
|
::= { wwpLeosTrafficProfileStdPhbTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdPhbEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdPhb INTEGER,
|
|
wwpLeosTrafficProfileStdPhbToProfile INTEGER,
|
|
wwpLeosTrafficProfileStdPhbStatus RowStatus
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdPhb OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cs0(1),
|
|
cs1(2),
|
|
cs2(3),
|
|
cs3(4),
|
|
cs4(5),
|
|
cs5(6),
|
|
cs6(7),
|
|
cs7(8),
|
|
af1(9),
|
|
af2(10),
|
|
af3(11),
|
|
af4(12),
|
|
ef(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the diff-serv values for the associated
|
|
standard profile entry in wwpLeosTrafficProfileStdTable."
|
|
::= { wwpLeosTrafficProfileStdPhbEntry 1 }
|
|
|
|
wwpLeosTrafficProfileStdPhbToProfile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the profile to which wwpLeosTrafficProfileStdPhb
|
|
must be mapped to."
|
|
::= { wwpLeosTrafficProfileStdPhbEntry 2 }
|
|
|
|
wwpLeosTrafficProfileStdPhbStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdPhbStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdPhbToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdPhbStatus to destroy."
|
|
::= { wwpLeosTrafficProfileStdPhbEntry 3 }
|
|
|
|
--
|
|
-- Cascaded Profile Stats
|
|
--
|
|
wwpLeosTrafficProfileCascadedStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileCascadedStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of cascaded profile stats."
|
|
::= { wwpLeosTrafficProfile 8 }
|
|
|
|
wwpLeosTrafficProfileCascadedStatsEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileCascadedStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedStatsTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileCascadedIndx }
|
|
::= { wwpLeosTrafficProfileCascadedStatsTable 1 }
|
|
|
|
WwpLeosTrafficProfileCascadedStatsEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileCascadedAcceptedBytesHi Counter32,
|
|
wwpLeosTrafficProfileCascadedAcceptedBytesLo Counter32,
|
|
wwpLeosTrafficProfileCascadedDroppedBytesHi Counter32,
|
|
wwpLeosTrafficProfileCascadedDroppedBytesLo Counter32,
|
|
wwpLeosTrafficProfileCascadedRemarkedBytesHi Counter32,
|
|
wwpLeosTrafficProfileCascadedRemarkedBytesLo Counter32
|
|
}
|
|
|
|
wwpLeosTrafficProfileCascadedAcceptedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of accepted frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedStatsEntry 1 }
|
|
|
|
wwpLeosTrafficProfileCascadedAcceptedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the lower bytes of accepted frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedStatsEntry 2 }
|
|
|
|
wwpLeosTrafficProfileCascadedDroppedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of dropped frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedStatsEntry 3 }
|
|
|
|
wwpLeosTrafficProfileCascadedDroppedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the lower bytes of dropped frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedStatsEntry 4 }
|
|
|
|
wwpLeosTrafficProfileCascadedRemarkedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of remarked frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedStatsEntry 5 }
|
|
|
|
wwpLeosTrafficProfileCascadedRemarkedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the lower bytes of remarked frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedStatsEntry 6 }
|
|
|
|
--
|
|
-- Standard Profile Stats
|
|
--
|
|
wwpLeosTrafficProfileStdStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of standard profile stats."
|
|
::= { wwpLeosTrafficProfile 9 }
|
|
|
|
wwpLeosTrafficProfileStdStatsEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry in wwpLeosTrafficProfileStdStatsTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdIndx }
|
|
::= { wwpLeosTrafficProfileStdStatsTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdStatsEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdAcceptedBytesHi Counter32,
|
|
wwpLeosTrafficProfileStdAcceptedBytesLo Counter32,
|
|
wwpLeosTrafficProfileStdDroppedBytesHi Counter32,
|
|
wwpLeosTrafficProfileStdDroppedBytesLo Counter32,
|
|
wwpLeosTrafficProfileStdHCAcceptedBytes Counter64,
|
|
wwpLeosTrafficProfileStdHCDroppedBytes Counter64,
|
|
wwpLeosTrafficProfileStdHCAcceptedPackets Counter64,
|
|
wwpLeosTrafficProfileStdHCDroppedPackets Counter64
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdAcceptedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of accepted frames of
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdStatsEntry 1 }
|
|
|
|
wwpLeosTrafficProfileStdAcceptedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the lower bytes of accepted frames of
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdStatsEntry 2 }
|
|
|
|
wwpLeosTrafficProfileStdDroppedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of dropped frames of
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdStatsEntry 3 }
|
|
|
|
wwpLeosTrafficProfileStdDroppedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of dropped frames of
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdStatsEntry 4 }
|
|
|
|
wwpLeosTrafficProfileStdHCAcceptedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the bytes of accepted frame data by a
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdStatsEntry 5 }
|
|
|
|
wwpLeosTrafficProfileStdHCDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the bytes of dropped frame data by a
|
|
given standard profile."
|
|
|
|
::= { wwpLeosTrafficProfileStdStatsEntry 6 }
|
|
|
|
wwpLeosTrafficProfileStdHCAcceptedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of packets passed by a standard profile"
|
|
::= { wwpLeosTrafficProfileStdStatsEntry 7 }
|
|
|
|
wwpLeosTrafficProfileStdHCDroppedPackets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of packets dropped by a standard profile"
|
|
::= { wwpLeosTrafficProfileStdStatsEntry 8 }
|
|
|
|
--
|
|
-- cascaded traffic profile global table
|
|
--
|
|
wwpLeosTrafficProfileCascadedGlobalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileCascadedGlobalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of global attributes used by cascaded traffic profile table.
|
|
To create entry in this table following criteria must be met.
|
|
- All indexes must be specified.
|
|
- wwpLeosTrafficProfileCascadedGlobalDot1d,wwpLeosTrafficProfileCascadedGlobalIpPrec and
|
|
wwpLeosTrafficProfileCascadedGlobalDscp may be specified.
|
|
- wwpLeosTrafficProfileCascadedGlobalName may be specified.
|
|
- wwpLeosTrafficProfileCascadedGlobalStatus must be set to createandgo"
|
|
::= { wwpLeosTrafficProfile 10 }
|
|
|
|
wwpLeosTrafficProfileCascadedGlobalEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileCascadedGlobalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A global cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedGlobalTable."
|
|
INDEX {wwpLeosTrafficProfileCascadedIndx}
|
|
::= { wwpLeosTrafficProfileCascadedGlobalTable 1 }
|
|
|
|
WwpLeosTrafficProfileCascadedGlobalEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileCascadedGlobalDot1d INTEGER,
|
|
wwpLeosTrafficProfileCascadedGlobalIpPrec INTEGER,
|
|
wwpLeosTrafficProfileCascadedGlobalDscp INTEGER,
|
|
wwpLeosTrafficProfileCascadedGlobalName DisplayString,
|
|
wwpLeosTrafficProfileCascadedGlobalStatus RowStatus
|
|
}
|
|
|
|
|
|
wwpLeosTrafficProfileCascadedGlobalDot1d OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..7)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This specifies the dot1d priority for a given cascaded traffic profile.
|
|
If this object returns -1 then it means the value was not set by user
|
|
and thus doesn't care."
|
|
::= { wwpLeosTrafficProfileCascadedGlobalEntry 1 }
|
|
|
|
wwpLeosTrafficProfileCascadedGlobalIpPrec OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..7)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This specifies the ip precedence value for a given cascaded traffic profile.
|
|
If this object returns -1 then it means the value was not set by user
|
|
and thus doesn't care."
|
|
::= { wwpLeosTrafficProfileCascadedGlobalEntry 2 }
|
|
|
|
wwpLeosTrafficProfileCascadedGlobalDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..63)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This specifies the dscp value for a given cascaded traffic profile.
|
|
If this object returns -1 then it means the value was not set by user
|
|
and thus doesn't care."
|
|
::= { wwpLeosTrafficProfileCascadedGlobalEntry 3 }
|
|
|
|
wwpLeosTrafficProfileCascadedGlobalName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..15))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The name associated with this profile. This must be unique name per profile.
|
|
The name does not have to be set on create. However, when updating the name,
|
|
it must have some value - zero-string not support."
|
|
::= { wwpLeosTrafficProfileCascadedGlobalEntry 4 }
|
|
|
|
wwpLeosTrafficProfileCascadedGlobalStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Setting this object to 'createandgo' will result in creating an global
|
|
cascaded traffic profile entry.
|
|
Setting this object to 'destroy' will delete the entry from the table."
|
|
::= { wwpLeosTrafficProfileCascadedGlobalEntry 5 }
|
|
--
|
|
-- Cascaded Profile Total Stats
|
|
--
|
|
wwpLeosTrafficProfileCascadedTotalStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileCascadedTotalStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of cascaded profile stats."
|
|
::= { wwpLeosTrafficProfile 11 }
|
|
|
|
wwpLeosTrafficProfileCascadedTotalStatsEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileCascadedTotalStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedTotalStatsTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileCascadedIndx }
|
|
::= { wwpLeosTrafficProfileCascadedTotalStatsTable 1 }
|
|
|
|
WwpLeosTrafficProfileCascadedTotalStatsEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileCascadedTotalAcceptedBytesHi Counter32,
|
|
wwpLeosTrafficProfileCascadedTotalAcceptedBytesLo Counter32,
|
|
wwpLeosTrafficProfileCascadedTotalDroppedBytesHi Counter32,
|
|
wwpLeosTrafficProfileCascadedTotalDroppedBytesLo Counter32,
|
|
wwpLeosTrafficProfileCascadedTotalRemarkedBytesHi Counter32,
|
|
wwpLeosTrafficProfileCascadedTotalRemarkedBytesLo Counter32
|
|
}
|
|
|
|
wwpLeosTrafficProfileCascadedTotalAcceptedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of accepted frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedTotalStatsEntry 1 }
|
|
|
|
wwpLeosTrafficProfileCascadedTotalAcceptedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the lower bytes of accepted frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedTotalStatsEntry 2 }
|
|
|
|
wwpLeosTrafficProfileCascadedTotalDroppedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of dropped frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedTotalStatsEntry 3 }
|
|
|
|
wwpLeosTrafficProfileCascadedTotalDroppedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the lower bytes of dropped frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedTotalStatsEntry 4 }
|
|
|
|
wwpLeosTrafficProfileCascadedTotalRemarkedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of remarked frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedTotalStatsEntry 5 }
|
|
|
|
wwpLeosTrafficProfileCascadedTotalRemarkedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the lower bytes of remarked frames of
|
|
given cascaded profile."
|
|
::= { wwpLeosTrafficProfileCascadedTotalStatsEntry 6 }
|
|
|
|
--
|
|
-- Standard Profile Total Stats
|
|
--
|
|
wwpLeosTrafficProfileStdTotalStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdTotalStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of standard profile stats."
|
|
::= { wwpLeosTrafficProfile 12 }
|
|
|
|
wwpLeosTrafficProfileStdTotalStatsEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdTotalStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry in wwpLeosTrafficProfileStdTotalStatsTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdIndx }
|
|
::= { wwpLeosTrafficProfileStdTotalStatsTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdTotalStatsEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdTotalAcceptedBytesHi Counter32,
|
|
wwpLeosTrafficProfileStdTotalAcceptedBytesLo Counter32,
|
|
wwpLeosTrafficProfileStdTotalDroppedBytesHi Counter32,
|
|
wwpLeosTrafficProfileStdTotalDroppedBytesLo Counter32
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdTotalAcceptedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of accepted frames of
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdTotalStatsEntry 1 }
|
|
|
|
wwpLeosTrafficProfileStdTotalAcceptedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the lower bytes of accepted frames of
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdTotalStatsEntry 2 }
|
|
|
|
wwpLeosTrafficProfileStdTotalDroppedBytesHi OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of dropped frames of
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdTotalStatsEntry 3 }
|
|
|
|
wwpLeosTrafficProfileStdTotalDroppedBytesLo OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the higher bytes of dropped frames of
|
|
given standard profile."
|
|
::= { wwpLeosTrafficProfileStdTotalStatsEntry 4 }
|
|
|
|
-- Std Profile Vlan Table
|
|
|
|
wwpLeosTrafficProfileStdVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Std Vlan Traffic Profile Entries.
|
|
To create entry in the table following criteria must be met
|
|
-- set wwpLeosTrafficProfileStdVlanStatus to 'createandgo'.
|
|
-- set wwpLeosTrafficProfileStdVlan to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdVlanStatus to destroy."
|
|
::= { wwpLeosTrafficProfile 14 }
|
|
|
|
wwpLeosTrafficProfileStdVlanEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard Dscp traffic profile entry in the wwpLeosTrafficProfileStdTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdVlanIndex}
|
|
::= { wwpLeosTrafficProfileStdVlanTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdVlanEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdVlanIndex INTEGER,
|
|
wwpLeosTrafficProfileStdVlanToProfile INTEGER,
|
|
wwpLeosTrafficProfileStdVlanStatus RowStatus
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdVlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Vlan for the associated
|
|
standard profile entry in wwpLeosTrafficProfileStdTable."
|
|
::= { wwpLeosTrafficProfileStdVlanEntry 1 }
|
|
|
|
wwpLeosTrafficProfileStdVlanToProfile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the profile to which wwpLeosTrafficProfileStdVlan
|
|
must be mapped to."
|
|
::= { wwpLeosTrafficProfileStdVlanEntry 2 }
|
|
|
|
wwpLeosTrafficProfileStdVlanStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdVlanStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdVlanToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdVlanStatus to destroy."
|
|
::= { wwpLeosTrafficProfileStdVlanEntry 3 }
|
|
|
|
--
|
|
-- Std profile DSCP table
|
|
--
|
|
|
|
wwpLeosTrafficProfileStdDscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of standard Dscp traffic profile entries.
|
|
To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdDscpStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdDscpToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdDscpStatus to destroy."
|
|
::= { wwpLeosTrafficProfile 15 }
|
|
|
|
wwpLeosTrafficProfileStdDscpEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard Dscp traffic profile entry in the wwpLeosTrafficProfileStdTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdDscp}
|
|
::= { wwpLeosTrafficProfileStdDscpTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdDscpEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdDscp INTEGER,
|
|
wwpLeosTrafficProfileStdDscpToProfile INTEGER,
|
|
wwpLeosTrafficProfileStdDscpStatus RowStatus
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Dscp for the associated
|
|
standard profile entry in wwpLeosTrafficProfileStdTable."
|
|
::= { wwpLeosTrafficProfileStdDscpEntry 1 }
|
|
|
|
wwpLeosTrafficProfileStdDscpToProfile OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the profile to which wwpLeosTrafficProfileStdDscp
|
|
must be mapped to."
|
|
::= { wwpLeosTrafficProfileStdDscpEntry 2 }
|
|
|
|
wwpLeosTrafficProfileStdDscpStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdDscpStatus to 'createandgo'.
|
|
- set wwpLeosTrafficProfileStdDscpToProfile to valid profile.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdDscpStatus to destroy."
|
|
::= { wwpLeosTrafficProfileStdDscpEntry 3 }
|
|
|
|
--
|
|
-- Meter-Pool Table
|
|
--
|
|
wwpLeosTrafficProfileMeterPoolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileMeterPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A Table of Meter Pool"
|
|
::= { wwpLeosTrafficProfile 16 }
|
|
|
|
wwpLeosTrafficProfileMeterPoolEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileMeterPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A Meter Pool Entry in wwpLeosTrafficProfileMeterPoolTable"
|
|
INDEX { wwpLeosTrafficProfileMeterPoolIndex }
|
|
::= {wwpLeosTrafficProfileMeterPoolTable 1 }
|
|
|
|
WwpLeosTrafficProfileMeterPoolEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileMeterPoolIndex INTEGER,
|
|
wwpLeosTrafficProfileMeterPoolName DisplayString,
|
|
wwpLeosTrafficProfileMeterPoolNumOfMeters Integer32,
|
|
wwpLeosTrafficProfileMeterPoolMetersUsed Integer32,
|
|
wwpLeosTrafficProfileMeterPoolNumOfStats Integer32,
|
|
wwpLeosTrafficProfileMeterPoolStatsUsed Integer32,
|
|
wwpLeosTrafficProfileMeterPoolNumOfClassifiers Integer32,
|
|
wwpLeosTrafficProfileMeterPoolClassifiersUsed Integer32
|
|
}
|
|
wwpLeosTrafficProfileMeterPoolIndex OBJECT-TYPE
|
|
SYNTAX INTEGER(1..8)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A Meter Pool Index"
|
|
::= { wwpLeosTrafficProfileMeterPoolEntry 1}
|
|
|
|
wwpLeosTrafficProfileMeterPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Meter Pool Name"
|
|
::= { wwpLeosTrafficProfileMeterPoolEntry 2}
|
|
|
|
wwpLeosTrafficProfileMeterPoolNumOfMeters OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Meters for a pool"
|
|
::= {wwpLeosTrafficProfileMeterPoolEntry 3}
|
|
|
|
wwpLeosTrafficProfileMeterPoolMetersUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Used Meters in a Pool"
|
|
::= {wwpLeosTrafficProfileMeterPoolEntry 4}
|
|
|
|
wwpLeosTrafficProfileMeterPoolNumOfStats OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Stats Counters for a pool"
|
|
::= {wwpLeosTrafficProfileMeterPoolEntry 5}
|
|
|
|
wwpLeosTrafficProfileMeterPoolStatsUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Used Stats Counters in a Pool"
|
|
::= {wwpLeosTrafficProfileMeterPoolEntry 6}
|
|
|
|
wwpLeosTrafficProfileMeterPoolNumOfClassifiers OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Classifiers for a pool"
|
|
::= {wwpLeosTrafficProfileMeterPoolEntry 7}
|
|
|
|
wwpLeosTrafficProfileMeterPoolClassifiersUsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Used Classifiers in a Pool"
|
|
::= {wwpLeosTrafficProfileMeterPoolEntry 8}
|
|
|
|
|
|
--
|
|
-- Tos Stamp
|
|
--
|
|
wwpLeosTrafficProfileTosStampTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileTosStampEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of TosStamps entries."
|
|
::= { wwpLeosTrafficProfile 20 }
|
|
|
|
wwpLeosTrafficProfileTosStampEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileTosStampEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry in wwpLeosTrafficProfileTosStampTable."
|
|
INDEX { wwpLeosTrafficProfilePort }
|
|
::= { wwpLeosTrafficProfileTosStampTable 1 }
|
|
|
|
WwpLeosTrafficProfileTosStampEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileTosStampState INTEGER,
|
|
wwpLeosTrafficProfileTosStampValue INTEGER
|
|
}
|
|
wwpLeosTrafficProfileTosStampState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the TOS Stamp on a port"
|
|
::= { wwpLeosTrafficProfileTosStampEntry 1 }
|
|
|
|
wwpLeosTrafficProfileTosStampValue OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Value of the TOS Stamp. For IP
|
|
prec left shift the value by 3 bits."
|
|
::= { wwpLeosTrafficProfileTosStampEntry 2}
|
|
|
|
--
|
|
-- IP/DSCP enable disable
|
|
--
|
|
wwpLeosTrafficProfileIpDscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileIpDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of IpDscp entries."
|
|
::= { wwpLeosTrafficProfile 21 }
|
|
|
|
wwpLeosTrafficProfileIpDscpEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileIpDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry in wwpLeosTrafficProfileIpDscpTable."
|
|
INDEX { wwpLeosTrafficProfilePort }
|
|
::= { wwpLeosTrafficProfileIpDscpTable 1 }
|
|
|
|
WwpLeosTrafficProfileIpDscpEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileIpp0Cs0State INTEGER,
|
|
wwpLeosTrafficProfileIpp1Cs1State INTEGER,
|
|
wwpLeosTrafficProfileIpp2Cs2State INTEGER,
|
|
wwpLeosTrafficProfileIpp3Cs3State INTEGER,
|
|
wwpLeosTrafficProfileIpp4Cs4State INTEGER,
|
|
wwpLeosTrafficProfileIpp5Cs5State INTEGER,
|
|
wwpLeosTrafficProfileIpp6Cs6State INTEGER,
|
|
wwpLeosTrafficProfileIpp7Cs7State INTEGER,
|
|
wwpLeosTrafficProfileAf1State INTEGER,
|
|
wwpLeosTrafficProfileAf2State INTEGER,
|
|
wwpLeosTrafficProfileAf3State INTEGER,
|
|
wwpLeosTrafficProfileAf4State INTEGER,
|
|
wwpLeosTrafficProfileEfState INTEGER
|
|
}
|
|
wwpLeosTrafficProfileIpp0Cs0State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ipp0 or cs0 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 1 }
|
|
|
|
wwpLeosTrafficProfileIpp1Cs1State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ipp1 or cs1 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 2 }
|
|
|
|
wwpLeosTrafficProfileIpp2Cs2State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ipp0 or cs0 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 3 }
|
|
|
|
wwpLeosTrafficProfileIpp3Cs3State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ipp3 or cs3 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 4 }
|
|
|
|
wwpLeosTrafficProfileIpp4Cs4State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ipp4 or cs4 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 5 }
|
|
|
|
wwpLeosTrafficProfileIpp5Cs5State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ipp5 or cs5 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 6 }
|
|
|
|
wwpLeosTrafficProfileIpp6Cs6State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ipp6 or cs6 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 7 }
|
|
|
|
wwpLeosTrafficProfileIpp7Cs7State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ipp7 or cs7 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 8 }
|
|
|
|
wwpLeosTrafficProfileAf1State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Af1 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 9 }
|
|
|
|
wwpLeosTrafficProfileAf2State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Af2 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 10 }
|
|
|
|
wwpLeosTrafficProfileAf3State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Af3 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 11}
|
|
|
|
wwpLeosTrafficProfileAf4State OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Af4 enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 12 }
|
|
|
|
wwpLeosTrafficProfileEfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the state of the Ef enable disable on a port"
|
|
::= { wwpLeosTrafficProfileIpDscpEntry 13 }
|
|
|
|
|
|
--
|
|
-- Std profile stdVlanDot1DPri table
|
|
--
|
|
wwpLeosTrafficProfileStdVlanDot1dTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdVlanDot1dEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Std Vlan dot1d traffic profile entries.
|
|
To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy."
|
|
::= { wwpLeosTrafficProfile 40 }
|
|
|
|
wwpLeosTrafficProfileStdVlanDot1dEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdVlanDot1dEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard dot1d traffic profile entry in the wwpLeosTrafficProfileStdDot1dTable."
|
|
INDEX { wwpLeosTrafficProfilePort, wwpLeosTrafficProfileStdDot1d, wwpLeosTrafficProfileStdIndx}
|
|
::= { wwpLeosTrafficProfileStdVlanDot1dTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdVlanDot1dEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdVlanDot1dStatus RowStatus
|
|
}
|
|
|
|
wwpLeosTrafficProfileStdVlanDot1dStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy."
|
|
::= { wwpLeosTrafficProfileStdVlanDot1dEntry 1 }
|
|
|
|
|
|
--
|
|
-- Std profile stdVlanIpPrec table
|
|
--
|
|
wwpLeosTrafficProfileStdVlanIpPrecTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdVlanIpPrecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Std Vlan-Ip prec traffic profile entries.
|
|
To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createandgo'.
|
|
To delete entry set wwpLeosTrafficProfileStdVlanIpPrecStatus to destroy."
|
|
::= { wwpLeosTrafficProfile 41 }
|
|
|
|
wwpLeosTrafficProfileStdVlanIpPrecEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdVlanIpPrecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard vlan-Ip prec traffic profile entry in the wwpLeosTrafficProfileStdVlanIpPrecTable."
|
|
INDEX { wwpLeosTrafficProfilePort ,wwpLeosTrafficProfileStdIpPrec, wwpLeosTrafficProfileStdIndx}
|
|
::= { wwpLeosTrafficProfileStdVlanIpPrecTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdVlanIpPrecEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdVlanIpPrecStatus RowStatus
|
|
}
|
|
|
|
|
|
wwpLeosTrafficProfileStdVlanIpPrecStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createandgo'.
|
|
To delete entry set wwpLeosTrafficProfileStdVlanIpPrecStatus to destroy."
|
|
::= { wwpLeosTrafficProfileStdVlanIpPrecEntry 1 }
|
|
|
|
|
|
--
|
|
-- Std profile stdVlanDscp table
|
|
--
|
|
wwpLeosTrafficProfileStdVlanDscpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosTrafficProfileStdVlanDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Std Vlan-dscp traffic profile entries.
|
|
To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdVlanDscpStatus to 'createandgo'.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdVlanDscpStatus to destroy."
|
|
::= { wwpLeosTrafficProfile 42 }
|
|
|
|
wwpLeosTrafficProfileStdVlanDscpEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosTrafficProfileStdVlanDscpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A standard vlan-dscp traffic profile entry in the wwpLeosTrafficProfileStdVlanDscpTable."
|
|
INDEX { wwpLeosTrafficProfilePort , wwpLeosTrafficProfileStdDscp, wwpLeosTrafficProfileStdIndx }
|
|
::= { wwpLeosTrafficProfileStdVlanDscpTable 1 }
|
|
|
|
WwpLeosTrafficProfileStdVlanDscpEntry ::= SEQUENCE {
|
|
wwpLeosTrafficProfileStdVlanDscpStatus RowStatus
|
|
}
|
|
|
|
|
|
wwpLeosTrafficProfileStdVlanDscpStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To create entry in the table following criteria must be met
|
|
- set wwpLeosTrafficProfileStdVlanDscpStatus to 'createandgo'.
|
|
|
|
To delete entry set wwpLeosTrafficProfileStdVlanDscpStatus to destroy."
|
|
::= { wwpLeosTrafficProfileStdVlanDscpEntry 2 }
|
|
|
|
|
|
END
|
|
--
|
|
-- WWP-LEOS-TRAFFIC-PROFILE-MIB
|
|
--
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|