Observium_CE/mibs/ciena/WWP-LEOS-LLDP-MIB

1865 lines
71 KiB
Plaintext

-- This file was included in WWP MIB release 04-10-01-0027
WWP-LEOS-LLDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Integer32, Unsigned32, Counter32, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TimeStamp, TruthValue
FROM SNMPv2-TC
--SnmpAdminString
-- FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
-- TimeFilter
-- FROM RMON2-MIB
wwpModules, wwpModulesLeos
FROM WWP-SMI
AddressFamilyNumbers
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB;
wwpLeosLldpMIB MODULE-IDENTITY
LAST-UPDATED "200404180000Z"
ORGANIZATION "IEEE 802.1AB Workgroup"
CONTACT-INFO "The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue,
New York, NY 10016-5997, USA
http://grouper.ieee.org/groups/802/1/index.html"
DESCRIPTION
"The MIB module for LLDP configuration, statistics, local
system data and remote systems data components."
REVISION "200404180000Z"
DESCRIPTION
"Whole MIB deprecated."
REVISION "200304230000Z"
DESCRIPTION
"Initial Version."
::= { wwpModulesLeos 26 }
wwpLeosLldpMIBObjects OBJECT IDENTIFIER ::= { wwpLeosLldpMIB 1 }
-- LLDP MIB groups
wwpLeosLldpConfiguration OBJECT IDENTIFIER ::= { wwpLeosLldpMIBObjects 1 }
wwpLeosLldpStatistics OBJECT IDENTIFIER ::= { wwpLeosLldpMIBObjects 2 }
wwpLeosLldpLocalSystemData OBJECT IDENTIFIER ::= { wwpLeosLldpMIBObjects 3 }
wwpLeosLldpRemoteSystemsData OBJECT IDENTIFIER ::= { wwpLeosLldpMIBObjects 4 }
wwpLeosLldpExtentions OBJECT IDENTIFIER ::= { wwpLeosLldpMIBObjects 5 }
wwpLeosLldpGlobalAtts OBJECT IDENTIFIER ::= { wwpLeosLldpMIBObjects 6 }
-- Notifications
wwpLeosLldpNotifMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosLldpMIB 3 }
wwpLeosLldpNotifMIBNotification OBJECT IDENTIFIER ::= { wwpLeosLldpNotifMIBNotificationPrefix 0 }
-- textual conventions
TimeFilter ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"To be used for the index to a table. Allows an application
to download only those rows changed since a particular time.
A row is considered changed if the value of any object in the
row changes or if the row is created or deleted.
When sysUpTime is equal to zero, this table shall be empty.
One entry exists for each past value of sysUpTime, except that
the whole table is purged should sysUpTime wrap.
As this basic row is updated new conceptual rows are created
(which still share the now updated object values with all
other instances). The number of instances which are created
is determined by the value of sysUpTime at which the basic row
was last updated. One instance will exist for each value of
sysUpTime at the last update time for the row. A new
timeMark instance is created for each new sysUpTime value.
Each new conceptual row will be associated with the timeMark
instance which was created at the value of sysUpTime with
which the conceptual row is to be associated.
By definition all conceptual rows were updated at or after
time zero and so at least one conceptual row (associated with
timeMark.0) must exist for each underlying (basic) row.
See the appendix for further discussion of this variable.
Consider the following fooTable:
fooTable ...
INDEX { fooTimeMark, fooIndex }
FooEntry {
fooTimeMark TimeFilter
fooIndex INTEGER,
fooCounts Counter
}
Should there be two basic rows in this table (fooIndex == 1,
fooIndex == 2) and row 1 was updated most recently at time 6,
while row 2 was updated most recently at time 8, and both rows
had been updated on several earlier occasions such that the
deprecated values were 5 and 9 respectively then the following
fooCounts instances would exist.
fooCounts.0.1 5
fooCounts.0.2 9
fooCounts.1.1 5
fooCounts.1.2 9
fooCounts.2.1 5
fooCounts.2.2 9
fooCounts.3.1 5
fooCounts.3.2 9
fooCounts.4.1 5
fooCounts.4.2 9
fooCounts.5.1 5
fooCounts.5.2 9
fooCounts.6.1 5
fooCounts.6.2 9
fooCounts.7.2 9 -- note that row 1 doesn't exist for
fooCounts.8.2 9 -- times 7 and 8"
SYNTAX TimeTicks
SnmpAdminString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS deprecated
DESCRIPTION "An octet string containing administrative
information, preferably in human-readable form.
To facilitate internationalization, this
information is represented using the ISO/IEC
IS 10646-1 character set, encoded as an octet
string using the UTF-8 transformation format
described in [RFC2279].
Since additional code points are added by
amendments to the 10646 standard from time
to time, implementations must be prepared to
encounter any code point from 0x00000000 to
0x7fffffff. Byte sequences that do not
correspond to the valid UTF-8 encoding of a
code point or are outside this range are
prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline,
the control code sequence CR LF should be used.
The use of leading or trailing white space should
be avoided.
For code points not directly supported by user
interface hardware or software, an alternative
means of entry and display, such as hexadecimal,
may be provided.
For information encoded in 7-bit US-ASCII,
the UTF-8 encoding is identical to the
US-ASCII encoding.
UTF-8 may require multiple bytes to represent a
single character / code point; thus the length
of this object in octets may be different from
the number of characters encoded. Similarly,
size constraints refer to the number of encoded
octets, not the number of characters represented
by an encoding.
Note that when this TC is used for an object that
is used or envisioned to be used as an index, then
a SIZE restriction MUST be specified so that the
number of sub-identifiers for any object instance
does not exceed the limit of 128, as defined by
[RFC1905].
Note that the size of an SnmpAdminString object is
measured in octets, not characters.
"
SYNTAX OCTET STRING (SIZE (0..255))
WwpLeosLldpChassisIdType ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"This TC describes the source of a chassis identifier.
The enumeration 'entPhysicalAlias(1)' represents a chassis
identifier based on the value of entPhysicalAlias for
a chassis component (i.e., an entPhysicalClass value of
'chassis(3)').
The enumeration 'ifAlias(2)' represents a chassis identifier
based on the value of ifAlias for an interface on the
containing chassis.
The enumeration 'portEntPhysicalAlias(3)' represents a
chassis identifier based on the value of entPhysicalAlias for
a port component (i.e., entPhysicalClass value of 'port(10)'),
within the containing chassis.
The enumeration 'backplaneEntPhysicalAlias(4)' represents a
chassis identifier based on the value of entPhysicalAlias
for backplane component (i.e., entPhysicalClass value of
'backplane(4)'), within the containing chassis.
The enumeration 'macAddress(5)' represents a chassis
identifier based on the value of a unicast source MAC address
(encoded in network byte order and IEEE 802.3 canonical bit
order), of a port on the containing chassis.
The enumeration 'networkAddress(6)' represents a chassis
identifier based on a network address, associated with
a particular chassis. The encoded address is actually
composed of two fields. The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the network
address value.
The enumeration 'local(7)' represents a chassis identifier
based on a locally defined value."
SYNTAX INTEGER {
entPhysicalAlias(1),
ifAlias(2),
portEntPhysicalAlias(3),
backplaneEntPhysicalAlias(4),
macAddress(5),
networkAddress(6),
local(7)
}
WwpLeosLldpChassisId ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"This TC describes the format of a chassis identifier string.
Objects of this type are always used with an associated
WwpLeosLldpChassisIdType object, which identifies the format of
the particular WwpLeosLldpChassisId object instance.
If the associated ChassisIdType object has a value of
'entPhysicalAlias(1)', then the octet string identifies
a particular instance of the entPhysicalAlias object for
a chassis component (i.e., an entPhysicalClass value of
'chassis(3)').
If the associated WwpLeosLldpChassisIdType object has a value of
'ifAlias(2)', then the octet string identifies a particular
instance of the ifAlias object for an interface on the
containing chassis.
If the associated WwpLeosLldpChassisIdType object has a value of
'portEntPhysicalAlias(3)', then the octet string identifies
a particular instance of the entPhysicalAlias object for a
port component within the containing chassis.
If the associated WwpLeosLldpChassisIdType object has a value
of 'backplaneEntPhysicalAlias(4)', then the octet string
identifies a particular instance of the entPhysicalAlias
object for the backplane component within the containing
chassis.
If the associated ChassisIdType object has a value of
'macAddress(5)', then this string identifies a particular
unicast source MAC address (encoded in network byte order
and IEEE 802.3 canonical bit order), of a port on the
containing chassis.
If the associated ChassisIdType object has a value of
'networkAddress(6)', then this string identifies a particular
network address, encoded in network byte order, associated
with one or more ports on the containing chassis. The first
octet contains the IANA Address Family Numbers enumeration
value for the specific address type, and octets 2 through
N contain the network address value in network byte order.
If the associated ChassisIdType object has a value of
'local(7)', then this string identifies a locally assigned
Chassis ID."
SYNTAX OCTET STRING (SIZE (1..255))
WwpLeosLldpPortIdType ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"This TC describes the source of a particular type of port
identifier used in the LLDP MIB.
The enumeration 'ifAlias(1)' represents a port identifier
based on the ifAlias MIB object.
The enumeration 'portEntPhysicalAlias(2)' represents a port
identifier based on the value of entPhysicalAlias for a
port component (i.e., entPhysicalClass value of 'port(10)'),
within the containing chassis.
The enumeration 'backplaneEntPhysicalAlias(3)' represents
a port identifier based on the value of entPhysicalAlias
for a backplane component (i.e., entPhysicalClass value of
'backplane(4)'), within the containing chassis.
The enumeration 'macAddress(4)' represents a port identifier
based on a unicast source MAC address, which has been detected
by the agent and associated with a particular port.
The enumeration 'networkAddress(5)' represents a port
identifier based on a network address, detected by the agent
and associated with a particular port.
The enumeration 'local(6)' represents a port identifier
based on a value locally assigned."
SYNTAX INTEGER {
ifAlias(1),
portEntPhysicalAlias(2),
backplaneEntPhysicalAlias(3),
macAddress(4),
networkAddress(5),
local(6)
}
WwpLeosLldpPortId ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
WwpLeosLldpPortIdType object, which identifies the format of the
particular WwpLeosLldpPortId object instance.
If the associated WwpLeosLldpPortIdType object has a value of
'ifAlias(1)', then the octet string identifies a
particular instance of the ifAlias object.
If the associated WwpLeosLldpPortIdType object has a value of
'portEntPhysicalAlias(2)', then the octet string
identifies a particular instance of the entPhysicalAlias
object for a port component (i.e., entPhysicalClass value of
'port(10)').
If the associated LlpdPortIdType object has a value
of 'backplaneEntPhysicalAlias(3)', then the
octet string identifies a particular instance of the
entPhysicalAlias object for a backplane component (i.e.,
entPhysicalClass value of 'port(4)').
If the associated WwpLeosLldpPortIdType object has a value of
'macAddr(4)', then this string identifies a
particular unicast source MAC address associated with
the port.
If the associated WwpLeosLldpPortIdType object has a value of
'networkAddress(5)', then this string identifies a network
address associated with the port. The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.
If the associated WwpLeosLldpPortIdType object has a value of
'local(6)', then this string identifies a locally
assigned port ID."
SYNTAX OCTET STRING (SIZE (1..255))
WwpLeosLldpManAddrIfSubtype ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"This TC describes the basis of a particular type of
management address interface used in the LLDP MIB.
The enumeration 'unknown(1)' represents the case where the
interface is not known.
The enumeration 'ifIndex(2)' represents interface identifier
based on the ifIndex MIB object.
The enumeration 'systemPortNumber(3)' represents interface
identifier based on the system port numbering convention."
SYNTAX INTEGER {
unknown(1),
ifIndex(2),
systemPortNumber(3)
}
WwpLeosLldpManAddress ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"The value of a management address."
SYNTAX OCTET STRING (SIZE (1..31))
WwpLeosLldpSystemCapabilitiesMap ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"This TC describes the system capabilities.
The bit 'repeater(0)' indicates that the system has repeater
capability.
The bit 'bridge(1)' indicates that the system has bridge
capability.
The bit 'accessPoint(2)' indicates that the system has access
point capability.
The bit 'router(3)' indicates that the system has router
capability.
The bit 'telephone(4)' indicates that the system has telephone
capability.
The bit 'wirelessStation(5)' indicates that the system has
wireless Station capability.
The bit 'stationOnly(6)' indicates that the system has only
station capability and nothing else."
SYNTAX BITS {
repeater(0),
bridge(1),
accessPoint(2),
router(3),
telephone(4),
wirelessStation(5),
stationOnly(6)
}
WwpLeosLldpPortNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS deprecated
DESCRIPTION
"Each port contained in the chassis (that is known to the
LLDP agent) is uniquely identified by a port number.
A port number has no mandatory relationship to an
interface number (of the interfaces MIB.) However, if
interfaces MIB is present, it is strongly recommended that
a port number has the same value as the corresponding
interface's interface number.
Port numbers are in the range (1..1024) since a particular
port is also represented by the corresponding port number bit
in LldpPortList. For more information about the LldpPortList,
please refer to 'LldpPortList' TC description."
SYNTAX Integer32(1..1024)
WwpLeosLldpPortList ::= TEXTUAL-CONVENTION
STATUS deprecated
DESCRIPTION
"Each octet within this value specifies a set of eight ports,
with the first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc. Within each octet,
the most significant bit represents the lowest numbered port,
and the least significant bit represents the highest numbered
port. Thus, each port of the system is represented by a
single bit within the value of this object. If that bit has
a value of '1' then that port is included in the set of ports;
the port is not included if its bit has a value of '0'."
REFERENCE
"description is taken from RFC 2674, Section 5"
SYNTAX OCTET STRING
--
-- ***********************************************************
--
-- L L D P C O N F I G
--
-- ***********************************************************
--
wwpLeosLldpMessageTxInterval OBJECT-TYPE
SYNTAX Integer32(5..32768)
UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The interval at which LLDP frames are transmitted on
behalf of this LLDP agent.
The default value for lldpMessageTxInterval object is
30 seconds.
If the agent is capable of storing non-volatile
configuration, then the value of this object must be restored
after a re-initialization of the management system."
REFERENCE
"IEEE 802.1AB/D8 section 10.5.5.3"
DEFVAL { 30 }
::= { wwpLeosLldpConfiguration 1 }
wwpLeosLldpMessageTxHoldMultiplier OBJECT-TYPE
SYNTAX Integer32(2..10)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The time-to-live value expressed as a multiple of the
wwpLeosLldpMessageTxInterval object. The actual time-to-live value
used in LLDP frames, transmitted on behalf of this LLDP agent,
can be expressed by the following formula: TTL = min(65535,
(wwpLeosLldpMessageTxInterval * wwpLeosLldpMessageTxHoldMultiplier)) For
example, if the value of wwpLeosLldpMessageTxInterval is '30', and
the value of wwpLeosLldpMessageTxHoldMultiplier is '4', then the
value '120' is encoded in the TTL field in the LLDP header.
The default value for wwpLeosLldpMessageTxHoldMultiplier object is 4.
If the agent is capable of storing non-volatile configuration,
then the value of this object must be restored after a
re-initialization of the management system."
REFERENCE
"IEEE 802.1AB/D8 section 10.5.5.3"
DEFVAL { 4 }
::= { wwpLeosLldpConfiguration 2 }
wwpLeosLldpReinitDelay OBJECT-TYPE
SYNTAX Integer32(1..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The wwpLeosLldpReinitDelay indicates the delay (in units
of seconds) from when adminStatus becomes 'disable' until
re-initialization will be attempted.
The default value for wwpLeosLldpReintDelay object is one second.
If the agent is capable of storing non-volatile configuration,
then the value of this object must be restored after a
re-initialization of the management system."
REFERENCE
"IEEE 802.1AB/D8 section 10.5.3.3"
DEFVAL { 1 }
::= { wwpLeosLldpConfiguration 3 }
wwpLeosLldpTxDelay OBJECT-TYPE
SYNTAX Integer32(1..8192)
UNITS "seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The wwpLeosLldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the wwpLeosLldpTxDelay is set by the
following formula:
1 <= wwpLeosLldpTxDelay <= (0.25 * wwpLeosLldpMessageTxInterval)
The default value for wwpLeosLldpTxDelay object is 8 seconds.
If the agent is capable of storing non-volatile configuration,
then the value of this object must be restored after a
re-initialization of the management system."
REFERENCE
"IEEE 802.1AB/D8 section 10.5.3.3"
DEFVAL { 8 }
::= { wwpLeosLldpConfiguration 4 }
--
-- wwpLeosLldpPortConfigTable: LLDP configuration on a per port basis
--
wwpLeosLldpPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The table that controls LLDP frame transmission on individual
ports."
::= { wwpLeosLldpConfiguration 5 }
wwpLeosLldpPortConfigEntry OBJECT-TYPE
SYNTAX WwpLeosLldpPortConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"LLDP configuration information for a particular port.
The port must be contained in the same chassis as the LLDP
agent. This configuration parameter controls the transmission
and the reception of LLDP frames on those ports whose rows
are created in this table."
INDEX { wwpLeosLldpPortConfigPortNum }
::= { wwpLeosLldpPortConfigTable 1 }
WwpLeosLldpPortConfigEntry ::= SEQUENCE {
wwpLeosLldpPortConfigPortNum WwpLeosLldpPortNumber,
wwpLeosLldpPortConfigAdminStatus INTEGER,
wwpLeosLldpPortConfigTLVsTxEnable BITS,
wwpLeosLldpPortConfigStatsClear TruthValue,
wwpLeosLldpPortConfigOperPortSpeed Unsigned32,
wwpLeosLldpPortConfigReqPortSpeed Unsigned32
}
wwpLeosLldpPortConfigPortNum OBJECT-TYPE
SYNTAX WwpLeosLldpPortNumber
MAX-ACCESS accessible-for-notify
STATUS deprecated
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
wwpLeosLldpPortConfigTable."
::= { wwpLeosLldpPortConfigEntry 1 }
wwpLeosLldpPortConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
txOnly(1),
rxOnly(2),
txAndRx(3),
disabled(4)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The administratively desired status of the local LLDP agent.
If the associated wwpLeosLldpPortConfigAdminStatus object has a
value of 'txOnly(1)', then this port will transmit LLDP
frames only and it will not store any information about the
remote systems connected.
If the associated wwpLeosLldpPortConfigAdminStatus object has a value
of 'rxOnly(2)', then this port will receive LLDP frames only.
If the associated wwpLeosLldpPortConfigAdminStatus object has a
value of 'txAndRx(3)', then this port will transmit and
receive LLDP frames.
If the associated wwpLeosLldpPortConfigAdminStatus object has a
value of 'disabled(4)', then this port will not transmit or
receive LLDP frames."
REFERENCE
"IEEE 802.1AB/D8 section 9.5.1"
DEFVAL { 3 }
::= { wwpLeosLldpPortConfigEntry 2 }
wwpLeosLldpPortConfigTLVsTxEnable OBJECT-TYPE
SYNTAX BITS {
portDesc(4),
sysName(5),
sysDesc(6),
sysCap(7)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The wwpLeosLldpTLVsTxEnable, defined as a bitmap, includes the
basic set of LLDP TLVs whose transmission is allowed on the
local LLDP agent by the network management. Each bit in the
bitmap corresponds to a TLV type associated with a specific
optional TLV. Some of the bits, such as 0 through 3, are
not included in the bitmap since they represent mandatory
TLVs that all LLDP agents should transmit.
It should be noted that the organizationally defined TLVs
are excluded from the wwpLeosLldpTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(4)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(5)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(6)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(7)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object, wwpLeosLldpConfigManAddrTable.
If the agent is capable of storing non-volatile configuration,
then the value of this object must be restored after a
re-initialization of the management system."
REFERENCE
"IEEE 802.1AB/D8 section 10.2.1.1"
DEFVAL { { portDesc, sysName, sysDesc, sysCap } }
-- the default value is the hexadecimal representation of
-- the bitmap includes the the following bits: portDesc(4),
-- sysName(5), sysDesc(6), sysCap(7)
::= { wwpLeosLldpPortConfigEntry 3 }
wwpLeosLldpPortConfigStatsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'true' will clear the LLDP statistics of given port."
::= { wwpLeosLldpPortConfigEntry 4 }
wwpLeosLldpPortConfigOperPortSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current egress bandwidth of the port in kbps."
::= { wwpLeosLldpPortConfigEntry 5 }
wwpLeosLldpPortConfigReqPortSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The requested egress bandwidth of the port in kbps. If no request
to change the egress bandwidth has been made, this value will be 0."
::= { wwpLeosLldpPortConfigEntry 6 }
--
-- wwpLeosLldpManAddrConfigTxPortsTable : selection of management addresses
-- to be transmitted on a specified set
-- of ports.
--
wwpLeosLldpConfigManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpConfigManAddrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The table that controls selection of LLDP management address
TLV instances to be transmitted on individual ports."
::= { wwpLeosLldpConfiguration 6 }
wwpLeosLldpConfigManAddrEntry OBJECT-TYPE
SYNTAX WwpLeosLldpConfigManAddrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"LLDP configuration information that specifies the set
of ports (represented as a PortList) on which the local
system management address instance will be transmitted.
This configuration object augments the wwpLeosLldpLocManAddrEntry,
therefore it is only present along with the management
address instance contained in the associated
wwpLeosLldpLocManAddrEntry entry.
If the agent is capable of storing non-volatile configuration,
then each active wwpLeosLldpManAddrConfigTxPortsEntry must be
re-created (along with the corresponding wwpLeosLldpLocManAddrEntry)
after a re-initialization of the management system."
AUGMENTS { wwpLeosLldpLocManAddrEntry }
::= { wwpLeosLldpConfigManAddrTable 1 }
WwpLeosLldpConfigManAddrEntry ::= SEQUENCE {
wwpLeosLldpManAddrPortsTxEnable WwpLeosLldpPortList
}
wwpLeosLldpManAddrPortsTxEnable OBJECT-TYPE
SYNTAX WwpLeosLldpPortList
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"a set of ports that are identified by a PortList, in which
each port is represented as a bit. The corresponding local
system management address instance will be transmitted on
the member ports of the wwpLeosLldpManAddrPortsTxEnable."
REFERENCE
"IEEE 802.1AB/D8 section 10.2.1.1"
::= { wwpLeosLldpConfigManAddrEntry 1 }
--
-- ***********************************************************
--
-- L L D P S T A T S
--
-- ***********************************************************
--
-- LLDP Stats Group
wwpLeosLldpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table containing LLDP statistics for individual ports.
Entries are not required to exist in this table while the
lldpPortConfigEntry object is equal to 'disabled(4)'."
::= { wwpLeosLldpStatistics 1 }
wwpLeosLldpStatsEntry OBJECT-TYPE
SYNTAX WwpLeosLldpStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"LLDP frame statistics for a particular port. The port
must be contained in the same chassis as the LLDP agent.
All statistical counter values in a particular entry shall
be maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port."
INDEX { wwpLeosLldpStatsPortNum }
::= { wwpLeosLldpStatsTable 1 }
WwpLeosLldpStatsEntry ::= SEQUENCE {
wwpLeosLldpStatsPortNum WwpLeosLldpPortNumber,
wwpLeosLldpStatsFramesDiscardedTotal Counter32,
wwpLeosLldpStatsFramesInErrors Counter32,
wwpLeosLldpStatsFramesInTotal Counter32,
wwpLeosLldpStatsFramesOutTotal Counter32,
wwpLeosLldpStatsTLVsInErrors Counter32,
wwpLeosLldpStatsTLVsDiscardedTotal Counter32,
wwpLeosLldpStatsTLVsUnrecognizedTotal Counter32,
wwpLeosLldpCounterDiscontinuityTime TimeStamp
}
wwpLeosLldpStatsPortNum OBJECT-TYPE
SYNTAX WwpLeosLldpPortNumber
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpStatsTable."
::= { wwpLeosLldpStatsEntry 1 }
wwpLeosLldpStatsFramesDiscardedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of LLDP frames received by this LLDP agent on
the indicated port, and then discarded for any reason.
This counter can provide an indication that LLDP header
formatting problems may exist with the local LLDP agent in
the sending system or that LLDPDU validation problems may
exit with the local LLDP agent in the receiving system.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of wwpLeosLldpCounterDiscontinuityTime."
REFERENCE
"IEEE 802.1AB/D8 section 11.4.2"
::= { wwpLeosLldpStatsEntry 2 }
wwpLeosLldpStatsFramesInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of invalid LLDP frames received by this LLDP
agent on the indicated port, while this LLDP agent is enabled.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of wwpLeosLldpCounterDiscontinuityTime."
REFERENCE
"IEEE 802.1AB/D8 section 11.4.2"
::= { wwpLeosLldpStatsEntry 3 }
wwpLeosLldpStatsFramesInTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of valid LLDP frames received by this LLDP agent
on the indicated port, while this LLDP agent is enabled.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of wwpLeosLldpCounterDiscontinuityTime."
REFERENCE
"IEEE 802.1AB/D8 section 11.4.2"
::= { wwpLeosLldpStatsEntry 4 }
wwpLeosLldpStatsFramesOutTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of LLDP frames transmitted by this LLDP agent
on the indicated port.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of wwpLeosLldpCounterDiscontinuityTime."
REFERENCE
"IEEE 802.1AB/D8 section 11.4.2"
::= { wwpLeosLldpStatsEntry 5 }
wwpLeosLldpStatsTLVsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of erroneous LLDP TLVs received by this LLDP
agent on the indicated port.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of wwpLeosLldpCounterDiscontinuityTime."
REFERENCE
"IEEE 802.1AB/D8 section 11.4.2"
::= { wwpLeosLldpStatsEntry 6 }
wwpLeosLldpStatsTLVsDiscardedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of LLDP TLVs discarded for any reason by this LLDP
agent on the indicated port.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of wwpLeosLldpCounterDiscontinuityTime."
REFERENCE
"IEEE 802.1AB/D8 section 11.4.2"
::= { wwpLeosLldpStatsEntry 7 }
wwpLeosLldpStatsTLVsUnrecognizedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent on the indicated port.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of wwpLeosLldpCounterDiscontinuityTime."
REFERENCE
"IEEE 802.1AB/D8 section 11.4.2"
::= { wwpLeosLldpStatsEntry 8 }
wwpLeosLldpCounterDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object is defined to record the time of the last
discontinuity in statistics counters of the indicated port.
The relevant counters are the specific instances associated
with this port of any Counter32 objects contained in the
wwpLeosLldpStatsTable. If no such discontinuities have occurred
since the last re-initialization of the local management
subsystem, then this object contains a zero value."
::= { wwpLeosLldpStatsEntry 9 }
-- ***********************************************************
--
-- L O C A L S Y S T E M D A T A
--
-- ***********************************************************
wwpLeosLldpLocChassisType OBJECT-TYPE
SYNTAX WwpLeosLldpChassisIdType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of encoding used to identify the chassis
associated with the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.2.2"
::= { wwpLeosLldpLocalSystemData 1 }
wwpLeosLldpLocChassisId OBJECT-TYPE
SYNTAX WwpLeosLldpChassisId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the chassis component
associated with the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.2.3"
::= { wwpLeosLldpLocalSystemData 2 }
wwpLeosLldpLocSysName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the system name of the
local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.6.2"
::= { wwpLeosLldpLocalSystemData 3 }
wwpLeosLldpLocSysDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the system description
of the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.7.2"
::= { wwpLeosLldpLocalSystemData 4 }
wwpLeosLldpLocSysCapSupported OBJECT-TYPE
SYNTAX WwpLeosLldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The bitmap value used to identify which system capabilities
are supported on the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.8.2"
::= { wwpLeosLldpLocalSystemData 5 }
wwpLeosLldpLocSysCapEnabled OBJECT-TYPE
SYNTAX WwpLeosLldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The bitmap value used to identify which system capabilities
are enabled on the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.8.3"
::= { wwpLeosLldpLocalSystemData 6 }
--
-- wwpLeosLldpLocPortTable : Port specific Local system data
--
wwpLeosLldpLocPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpLocPortEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains one or more rows per port information
associated with the local system known to this agent."
::= { wwpLeosLldpLocalSystemData 7 }
wwpLeosLldpLocPortEntry OBJECT-TYPE
SYNTAX WwpLeosLldpLocPortEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Information about a particular port component.
Entries may be created and deleted in this table by the
agent."
INDEX { wwpLeosLldpLocPortNum }
::= { wwpLeosLldpLocPortTable 1 }
WwpLeosLldpLocPortEntry ::= SEQUENCE {
wwpLeosLldpLocPortNum WwpLeosLldpPortNumber,
wwpLeosLldpLocPortType WwpLeosLldpPortIdType,
wwpLeosLldpLocPortId WwpLeosLldpPortId,
wwpLeosLldpLocPortDesc SnmpAdminString
}
wwpLeosLldpLocPortNum OBJECT-TYPE
SYNTAX WwpLeosLldpPortNumber
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
wwpLeosLldpLocPortTable."
::= { wwpLeosLldpLocPortEntry 1 }
wwpLeosLldpLocPortType OBJECT-TYPE
SYNTAX WwpLeosLldpPortIdType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of port identifier encoding used in the associated
'wwpLeosLldpLocPortId' object."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.3.2"
::= { wwpLeosLldpLocPortEntry 2 }
wwpLeosLldpLocPortId OBJECT-TYPE
SYNTAX WwpLeosLldpPortId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the port component
associated with a given port in the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.3.3"
::= { wwpLeosLldpLocPortEntry 3 }
wwpLeosLldpLocPortDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the 802 LAN station's port
description associated with the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.5.2"
::= { wwpLeosLldpLocPortEntry 4 }
--
-- wwpLeosLldpLocManAddrTable : Management addresses of the local system
--
wwpLeosLldpLocManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpLocManAddrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains one row per management address
information on the local system known to this agent."
::= { wwpLeosLldpLocalSystemData 8 }
wwpLeosLldpLocManAddrEntry OBJECT-TYPE
SYNTAX WwpLeosLldpLocManAddrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Management address information about a particular chassis
component. There may be multiple management addresses
configured on the system identified by a particular
wwpLeosLldpLocChassisId. Each management address should have
distinct 'management address type' (wwpLeosLldpLocManAddrType) and
'management address' (wwpLeosLldpLocManAddr.)
Entries may be created and deleted in this table by the
agent."
INDEX { wwpLeosLldpLocManAddrType,
wwpLeosLldpLocManAddr }
::= { wwpLeosLldpLocManAddrTable 1 }
WwpLeosLldpLocManAddrEntry ::= SEQUENCE {
wwpLeosLldpLocManAddrType AddressFamilyNumbers,
wwpLeosLldpLocManAddr WwpLeosLldpManAddress,
wwpLeosLldpLocManAddrLen Integer32,
wwpLeosLldpLocManAddrIfSubtype WwpLeosLldpManAddrIfSubtype,
wwpLeosLldpLocManAddrIfId Integer32,
wwpLeosLldpLocManAddrOID OBJECT IDENTIFIER
}
wwpLeosLldpLocManAddrType OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The type of management address identifier encoding used in
the associated 'wwpLeosLldpLocManagmentAddr' object."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.3"
::= { wwpLeosLldpLocManAddrEntry 1 }
wwpLeosLldpLocManAddr OBJECT-TYPE
SYNTAX WwpLeosLldpManAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The string value used to identify the management address
component associated with the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.4"
::= { wwpLeosLldpLocManAddrEntry 2 }
wwpLeosLldpLocManAddrLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The total length of the management address subtype and the
management address fields in LLDPDUs transmitted by the
local LLDP agent.
The management address length field is needed so that the
receiving systems that do not implement SNMP will not be
required to implement an IANA family numbers/address length
equivalency table in order to decode the management address."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.2"
::= { wwpLeosLldpLocManAddrEntry 3 }
wwpLeosLldpLocManAddrIfSubtype OBJECT-TYPE
SYNTAX WwpLeosLldpManAddrIfSubtype
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The enumeration value used to identify the interface numbering
subtype from which the interface number is derived associated with
the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.5"
::= { wwpLeosLldpLocManAddrEntry 4 }
wwpLeosLldpLocManAddrIfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The integer value used to identify the interface number
regarding the management address component associated with
the local system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.6"
::= { wwpLeosLldpLocManAddrEntry 5 }
wwpLeosLldpLocManAddrOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the local system agent."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.8"
::= { wwpLeosLldpLocManAddrEntry 6 }
-- ***********************************************************
--
-- R E M O T E S Y S T E M S D A T A
--
-- ***********************************************************
wwpLeosLldpRemTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpRemEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains one or more rows per physical network
connection known to this agent. The agent may wish to ensure
that only one wwpLeosLldpRemEntry is present for each local port,
or it may choose to maintain multiple wwpLeosLldpRemEntries for
the same local port."
::= { wwpLeosLldpRemoteSystemsData 1 }
wwpLeosLldpRemEntry OBJECT-TYPE
SYNTAX WwpLeosLldpRemEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Information about a particular physical network connection.
Entries may be created and deleted in this table by the agent,
if a physical topology discovery process is active."
INDEX {
wwpLeosLldpRemTimeMark,
wwpLeosLldpRemLocalPortNum,
wwpLeosLldpRemIndex
}
::= { wwpLeosLldpRemTable 1 }
WwpLeosLldpRemEntry ::= SEQUENCE {
wwpLeosLldpRemTimeMark TimeFilter,
wwpLeosLldpRemLocalPortNum WwpLeosLldpPortNumber,
wwpLeosLldpRemIndex Integer32,
wwpLeosLldpRemRemoteChassisType WwpLeosLldpChassisIdType,
wwpLeosLldpRemRemoteChassis WwpLeosLldpChassisId,
wwpLeosLldpRemRemotePortType WwpLeosLldpPortIdType,
wwpLeosLldpRemRemotePort WwpLeosLldpPortId,
wwpLeosLldpRemPortDesc SnmpAdminString,
wwpLeosLldpRemSysName SnmpAdminString,
wwpLeosLldpRemSysDesc SnmpAdminString,
wwpLeosLldpRemSysCapSupported WwpLeosLldpSystemCapabilitiesMap,
wwpLeosLldpRemSysCapEnabled WwpLeosLldpSystemCapabilitiesMap
}
wwpLeosLldpRemTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in RFC 2021 to see how this works."
REFERENCE
"RFC 2021 section 6"
::= { wwpLeosLldpRemEntry 1 }
wwpLeosLldpRemLocalPortNum OBJECT-TYPE
SYNTAX WwpLeosLldpPortNumber
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The wwpLeosLldpRemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
wwpLeosLldpRemTable."
::= { wwpLeosLldpRemEntry 2 }
wwpLeosLldpRemIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
A particular wwpLeosLldpRemIndex value may be reused in the event
an entry is aged out and later re-learned with the same
(or different) remote chassis and port identifiers.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the wwpLeosLldpRemIndex
will wrap between reboots."
::= { wwpLeosLldpRemEntry 3 }
wwpLeosLldpRemRemoteChassisType OBJECT-TYPE
SYNTAX WwpLeosLldpChassisIdType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of encoding used to identify the chassis associated
with the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.2.2"
::= { wwpLeosLldpRemEntry 4 }
wwpLeosLldpRemRemoteChassis OBJECT-TYPE
SYNTAX WwpLeosLldpChassisId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the chassis component
associated with the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.2.3"
::= { wwpLeosLldpRemEntry 5 }
wwpLeosLldpRemRemotePortType OBJECT-TYPE
SYNTAX WwpLeosLldpPortIdType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of port identifier encoding used in the associated
'wwpLeosLldpRemRemotePort' object."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.3.2"
::= { wwpLeosLldpRemEntry 6 }
wwpLeosLldpRemRemotePort OBJECT-TYPE
SYNTAX WwpLeosLldpPortId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the port component
associated with the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.3.3"
::= { wwpLeosLldpRemEntry 7 }
wwpLeosLldpRemPortDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the description of
the given port associated with the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.5.2"
::= { wwpLeosLldpRemEntry 8 }
wwpLeosLldpRemSysName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the system name of the
remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.6.2"
::= { wwpLeosLldpRemEntry 9 }
wwpLeosLldpRemSysDesc OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the system description
of the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.7.2"
::= { wwpLeosLldpRemEntry 10 }
wwpLeosLldpRemSysCapSupported OBJECT-TYPE
SYNTAX WwpLeosLldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The bitmap value used to identify which system capabilities
are supported on the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.8.2"
::= { wwpLeosLldpRemEntry 11 }
wwpLeosLldpRemSysCapEnabled OBJECT-TYPE
SYNTAX WwpLeosLldpSystemCapabilitiesMap
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The bitmap value used to identify which system capabilities
are enabled on the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.8.3"
::= { wwpLeosLldpRemEntry 12 }
--
-- wwpLeosLldpRemManAddrTable : Management addresses of the remote system
--
wwpLeosLldpRemManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpRemManAddrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains one or more rows per management address
information on the remote system learned on a particular port
contained in the local chassis known to this agent."
::= { wwpLeosLldpRemoteSystemsData 2 }
wwpLeosLldpRemManAddrEntry OBJECT-TYPE
SYNTAX WwpLeosLldpRemManAddrEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Management address information about a particular chassis
component. There may be multiple management addresses
configured on the remote system identified by a particular
wwpLeosLldpRemIndex whose information is received on
wwpLeosLldpRemLocalPortNum of the local system. Each management
address should have distinct 'management address
type' (wwpLeosLldpRemManAddrType) and 'management address'
(wwpLeosLldpRemManAddr.)
Entries may be created and deleted in this table by the
agent."
INDEX { wwpLeosLldpRemTimeMark,
wwpLeosLldpRemLocalPortNum,
wwpLeosLldpRemIndex,
wwpLeosLldpRemManAddrType,
wwpLeosLldpRemManAddr
}
::= { wwpLeosLldpRemManAddrTable 1 }
WwpLeosLldpRemManAddrEntry ::= SEQUENCE {
wwpLeosLldpRemManAddrType AddressFamilyNumbers,
wwpLeosLldpRemManAddr WwpLeosLldpManAddress,
wwpLeosLldpRemManAddrIfSubtype WwpLeosLldpManAddrIfSubtype,
wwpLeosLldpRemManAddrIfId Integer32,
wwpLeosLldpRemManAddrOID OBJECT IDENTIFIER
}
wwpLeosLldpRemManAddrType OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The type of management address identifier encoding used in
the associated 'wwpLeosLldpRemManagmentAddr' object."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.3"
::= { wwpLeosLldpRemManAddrEntry 1 }
wwpLeosLldpRemManAddr OBJECT-TYPE
SYNTAX WwpLeosLldpManAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The string value used to identify the management address
component associated with the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.4"
::= { wwpLeosLldpRemManAddrEntry 2 }
wwpLeosLldpRemManAddrIfSubtype OBJECT-TYPE
SYNTAX WwpLeosLldpManAddrIfSubtype
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The enumeration value used to identify the interface numbering
subtype from which the interface number is derived associated with
the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.5"
::= { wwpLeosLldpRemManAddrEntry 3 }
wwpLeosLldpRemManAddrIfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The integer value used to identify the interface number
regarding the management address component associated with
the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.6"
::= { wwpLeosLldpRemManAddrEntry 4 }
wwpLeosLldpRemManAddrOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent."
REFERENCE
"IEEE 802.1AB/D8 section 9.4.9.8"
::= { wwpLeosLldpRemManAddrEntry 5 }
--
-- wwpLeosLldpRemUnknownTLVTable : Unrecognized TLV information
--
wwpLeosLldpRemUnknownTLVTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpRemUnknownTLVEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains information about an incoming TLV which
is not recognized by the receiving LLDP agent. The TLV may
be from a later version of the basic management set."
::= { wwpLeosLldpRemoteSystemsData 3 }
wwpLeosLldpRemUnknownTLVEntry OBJECT-TYPE
SYNTAX WwpLeosLldpRemUnknownTLVEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Information about an unrecognized TLV received from a
physical network connection. Entries may be created and
deleted in this table by the agent, if a physical topology
discovery process is active."
INDEX {
wwpLeosLldpRemTimeMark,
wwpLeosLldpRemLocalPortNum,
wwpLeosLldpRemIndex
}
::= { wwpLeosLldpRemUnknownTLVTable 1 }
WwpLeosLldpRemUnknownTLVEntry ::= SEQUENCE {
wwpLeosLldpRemUnknownTLVType Integer32,
wwpLeosLldpRemUnknownTLVInfo OCTET STRING
}
wwpLeosLldpRemUnknownTLVType OBJECT-TYPE
SYNTAX Integer32(9..126)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object represents the value extracted from the type
field of the TLV."
REFERENCE
"IEEE 802.1AB/D8 section 10.3.5"
::= { wwpLeosLldpRemUnknownTLVEntry 1 }
wwpLeosLldpRemUnknownTLVInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..511))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object represents the value extracted from the value
field of the TLV."
REFERENCE
"IEEE 802.1AB/D8 section 10.3.5"
::= { wwpLeosLldpRemUnknownTLVEntry 2 }
------------------------------------------------------------------------------
-- Remote Systems Extension Table - Organizationally Defined Information
------------------------------------------------------------------------------
wwpLeosLldpRemOrgDefInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosLldpRemOrgDefInfoEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains one or more rows per physical network
connection which advertises the organizationally defined
information.
Note that this table contains one or more rows of
organizationally defined information that is not recognized
by the local agent. The agent may wish to ensure that only
one wwpLeosLldpRemOrgDefInfoEntry is present for each remote system,
or it may choose to maintain multiple wwpLeosLldpRemOrgDefInfoEntries
for the same remote system.
If the local system is capable of recognizing any
organizationally defined information, appropriate extension
MIBs from the organization should be used for information
retrieval."
::= { wwpLeosLldpRemoteSystemsData 4 }
wwpLeosLldpRemOrgDefInfoEntry OBJECT-TYPE
SYNTAX WwpLeosLldpRemOrgDefInfoEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Information about the unrecognized organizationally
defined information advertised by the remote system.
The wwpLeosLldpRemTimeMark, wwpLeosLldpRemLocalPortNum, wwpLeosLldpRemIndex,
wwpLeosLldpRemOrgDefInfoOUI, wwpLeosLldpRemOrgDefInfoSubtype, and
wwpLeosLldpRemOrgDefInfoIndex are indexes to this table. If there is
an wwpLeosLldpRemOrgDefInfoEntry associated with a particular remote
system identified by the wwpLeosLldpRemLocalPortNum and wwpLeosLldpRemIndex,
there must be an wwpLeosLldpRemEntry associated with the same
instance (i.e, using same indexes.) When the wwpLeosLldpRemEntry
for the same index is removed from the wwpLeosLldpRemTable, the
associated wwpLeosLldpRemOrgDefInfoEntry should be removed from
the wwpLeosLldpRemOrgDefInfoTable.
Entries may be created and deleted in this table by the
agent."
INDEX { wwpLeosLldpRemTimeMark,
wwpLeosLldpRemLocalPortNum,
wwpLeosLldpRemIndex,
wwpLeosLldpRemOrgDefInfoOUI,
wwpLeosLldpRemOrgDefInfoSubtype,
wwpLeosLldpRemOrgDefInfoIndex }
::= { wwpLeosLldpRemOrgDefInfoTable 1 }
WwpLeosLldpRemOrgDefInfoEntry ::= SEQUENCE {
wwpLeosLldpRemOrgDefInfoOUI OCTET STRING,
wwpLeosLldpRemOrgDefInfoSubtype Integer32,
wwpLeosLldpRemOrgDefInfoIndex Integer32,
wwpLeosLldpRemOrgDefInfo OCTET STRING
}
wwpLeosLldpRemOrgDefInfoOUI OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The Organizationally Unique Identifier (OUI), as defined
in IEEE std. 802-2001, is a 24 bit (three octets) globally
unique assigned number referenced by various standards,
of the information received from the remote system."
REFERENCE
"IEEE 802.1AB/D8 section 9.5.1.3"
::= { wwpLeosLldpRemOrgDefInfoEntry 1 }
wwpLeosLldpRemOrgDefInfoSubtype OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The integer value used to identify the subtype of the
organizationally defined information received from the
remote system.
The subtype value is required to identify different instances
of organizationally defined information that could not be
retrieved without a unique identifier that indicates the
particular type of information contained in the information
string."
REFERENCE
"IEEE 802.1AB/D8 section 9.5.1.4"
::= { wwpLeosLldpRemOrgDefInfoEntry 2 }
wwpLeosLldpRemOrgDefInfoIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object represents an arbitrary local integer value
used by this agent to identify a particular unrecognized
organizationally defined information instance, unique only
for the wwpLeosLldpRemOrgDefInfoOUI and wwpLeosLldpRemOrgDefInfoSubtype
from the same remote system.
A particular wwpLeosLldpRemOrgDefInfoIndex value may be reused
in the event an entry is aged out and later re-learned
with the same (or different) wwpLeosLldpRemOrgDefInfoOUI and
wwpLeosLldpRemOrgDefInfoSubtype.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the
wwpLeosLldpRemOrgDefInfoIndex will wrap between reboots."
::= { wwpLeosLldpRemOrgDefInfoEntry 3 }
wwpLeosLldpRemOrgDefInfo OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..507))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The string value used to identify the organizationally
defined information of the remote system. The encoding for
this object should be as defined for SnmpAdminString TC."
REFERENCE
"IEEE 802.1AB/D8 section 9.5.1.5"
::= { wwpLeosLldpRemOrgDefInfoEntry 4 }
wwpLeosLldpStatsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this mib object to 'true' will clear
all statistics of LLDP."
::= { wwpLeosLldpGlobalAtts 1 }
-- conformance information
wwpLeosLldpConformance OBJECT IDENTIFIER ::= { wwpLeosLldpMIB 2 }
wwpLeosLldpCompliances OBJECT IDENTIFIER ::= { wwpLeosLldpConformance 1 }
wwpLeosLldpGroups OBJECT IDENTIFIER ::= { wwpLeosLldpConformance 2 }
-- compliance statements
wwpLeosLldpCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for SNMP entities which implement
the LLDP MIB."
MODULE -- this module
MANDATORY-GROUPS { wwpLeosLldpConfigGroup,
wwpLeosLldpStatsGroup,
wwpLeosLldpLocSysGroup,
wwpLeosLldpRemSysGroup
}
GROUP wwpLeosLldpOptLocSysGroup
DESCRIPTION
"This object represent the information associated with
the optional TLVs, therefore the agent may not implement
them."
::= { wwpLeosLldpCompliances 1 }
-- MIB groupings
wwpLeosLldpConfigGroup OBJECT-GROUP
OBJECTS {
wwpLeosLldpMessageTxInterval,
wwpLeosLldpMessageTxHoldMultiplier,
wwpLeosLldpReinitDelay,
wwpLeosLldpTxDelay,
wwpLeosLldpPortConfigAdminStatus,
wwpLeosLldpPortConfigTLVsTxEnable,
wwpLeosLldpManAddrPortsTxEnable
}
STATUS deprecated
DESCRIPTION
"The collection of objects which are used to configure the
LLDP implementation behavior.
This group is mandatory for agents which implement the LLDP."
::= { wwpLeosLldpGroups 1 }
wwpLeosLldpStatsGroup OBJECT-GROUP
OBJECTS {
wwpLeosLldpStatsFramesDiscardedTotal,
wwpLeosLldpStatsFramesInErrors,
wwpLeosLldpStatsFramesInTotal,
wwpLeosLldpStatsFramesOutTotal,
wwpLeosLldpStatsTLVsInErrors,
wwpLeosLldpStatsTLVsDiscardedTotal,
wwpLeosLldpStatsTLVsUnrecognizedTotal,
wwpLeosLldpCounterDiscontinuityTime
}
STATUS deprecated
DESCRIPTION
"The collection of objects which are used to represent LLDP
statistics.
This group is mandatory for agents which implement the LLDP."
::= { wwpLeosLldpGroups 2 }
wwpLeosLldpLocSysGroup OBJECT-GROUP
OBJECTS {
wwpLeosLldpLocChassisType,
wwpLeosLldpLocChassisId,
wwpLeosLldpLocPortType,
wwpLeosLldpLocPortId
}
STATUS deprecated
DESCRIPTION
"The collection of objects which are used to represent LLDP
Local System Information. The objects represent the
information associated with the mandatory TLVs.
This group is mandatory for agents which implement the LLDP."
::= { wwpLeosLldpGroups 3 }
wwpLeosLldpOptLocSysGroup OBJECT-GROUP
OBJECTS {
wwpLeosLldpLocPortDesc,
wwpLeosLldpLocSysDesc,
wwpLeosLldpLocSysName,
wwpLeosLldpLocSysCapSupported,
wwpLeosLldpLocSysCapEnabled,
wwpLeosLldpLocManAddrIfSubtype,
wwpLeosLldpLocManAddrIfId,
wwpLeosLldpLocManAddrOID
}
STATUS deprecated
DESCRIPTION
"The collection of objects which are used to represent optional
LLDP Local System Information. The objects represent the
information associated with the optional TLVs.
This group is optional for agents which implement the Lldp."
::= { wwpLeosLldpGroups 4 }
wwpLeosLldpRemSysGroup OBJECT-GROUP
OBJECTS {
wwpLeosLldpRemRemoteChassisType,
wwpLeosLldpRemRemoteChassis,
wwpLeosLldpRemRemotePortType,
wwpLeosLldpRemRemotePort,
wwpLeosLldpRemPortDesc,
wwpLeosLldpRemSysName,
wwpLeosLldpRemSysDesc,
wwpLeosLldpRemSysCapSupported,
wwpLeosLldpRemSysCapEnabled,
wwpLeosLldpRemManAddrIfSubtype,
wwpLeosLldpRemManAddrIfId,
wwpLeosLldpRemManAddrOID,
wwpLeosLldpRemUnknownTLVInfo,
wwpLeosLldpRemOrgDefInfo
}
STATUS deprecated
DESCRIPTION
"The collection of objects which are used to represent
LLDP Remote Systems Information. The objects represent the
information associated with the basic TLV set. Please note
that even the agent doesn't implement some of the optional
TLVs, it shall recognize all the optional TLV information
that the remote system may advertise.
This group is mandatory for agents which implement the Lldp."
::= { wwpLeosLldpGroups 5 }
--
-- Notifications
--
wwpLeosLldpPortSpeedChangeTrap NOTIFICATION-TYPE
OBJECTS {
wwpLeosLldpPortConfigPortNum,
wwpLeosLldpPortConfigOperPortSpeed,
wwpLeosLldpPortConfigReqPortSpeed
}
STATUS current
DESCRIPTION "A notification is sent whenever a request is made to change the
egress bandwidth of the port. OperPortSpeed is the speed of the
port at the time the request is received, ReqPortSpeed is the
new requested speed."
::= { wwpLeosLldpNotifMIBNotification 1 }
END