386 lines
12 KiB
Plaintext
386 lines
12 KiB
Plaintext
-- This file was included in WWP MIB release 04-10-01-0027
|
|
--
|
|
-- WWP-LEOS-LDP-MIB.my
|
|
--
|
|
|
|
WWP-LEOS-LDP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TimeTicks, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, IpAddress
|
|
FROM SNMPv2-SMI
|
|
DisplayString, MacAddress, TEXTUAL-CONVENTION, RowStatus, TruthValue
|
|
FROM SNMPv2-TC
|
|
wwpModulesLeos
|
|
FROM WWP-SMI
|
|
MplsLdpIdentifier
|
|
FROM MPLS-TC-STD-MIB
|
|
IndexInteger
|
|
FROM DIFFSERV-MIB;
|
|
|
|
|
|
wwpLeosLdpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200104031700Z"
|
|
ORGANIZATION "Ciena, Inc"
|
|
CONTACT-INFO
|
|
" Mib Meister
|
|
115 North Sullivan Road
|
|
Spokane Valley, WA 99037
|
|
USA
|
|
Phone: +1 509 242 9000
|
|
Email: support@ciena.com"
|
|
DESCRIPTION
|
|
"This MIB module is for the Extension of the BRIDGE MIB for WWP Products"
|
|
REVISION "200104031700Z"
|
|
DESCRIPTION
|
|
"Initial creation."
|
|
::= { wwpModulesLeos 32 }
|
|
|
|
|
|
--
|
|
-- TEXTUAL CONVENTIONS
|
|
--
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
wwpLeosLdpMIBObjects OBJECT IDENTIFIER ::= { wwpLeosLdpMIB 1 }
|
|
wwpLeosLdpObjects OBJECT IDENTIFIER ::= { wwpLeosLdpMIBObjects 1 }
|
|
wwpLeosLdp OBJECT IDENTIFIER ::= { wwpLeosLdpMIBObjects 2 }
|
|
|
|
|
|
--
|
|
-- Global objects
|
|
--
|
|
|
|
wwpLeosLdpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Globally enable/disable LDP"
|
|
::= { wwpLeosLdpObjects 1 }
|
|
|
|
wwpLeosLdpOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
up(2),
|
|
down(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current operational state of LDP"
|
|
::= { wwpLeosLdpObjects 2 }
|
|
|
|
wwpLeosLdpHelloHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 16-bit integer value which is the proposed
|
|
global hello hold timer (in seconds) for LDP.
|
|
|
|
An LSR maintains a record of Hellos received
|
|
from potential peers. This object represents
|
|
the Hold Time in the Common Hello Parameters TLV of
|
|
the Hello Message.
|
|
|
|
A value of 65535 means infinite (i.e., wait forever).
|
|
|
|
All other values represent the amount of time in
|
|
seconds to wait for a Hello Message. Setting the
|
|
hold time to a value smaller than 15 is not
|
|
recommended, although not forbidden according
|
|
to RFC3036."
|
|
::= { wwpLeosLdpObjects 3 }
|
|
|
|
wwpLeosLdpKeepAliveHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 16-bit integer value which is the proposed global
|
|
keep alive hold timer for LDP."
|
|
::= { wwpLeosLdpObjects 4 }
|
|
|
|
--
|
|
-- The WWP MPLS LDP Sessions Table. It augments MPLS LDP Sessions Table
|
|
--
|
|
|
|
wwpLeosLdpSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosLdpSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Sessions between the LDP Entities
|
|
and LDP Peers. Each row in this table
|
|
represents a single session."
|
|
::= { wwpLeosLdp 1 }
|
|
|
|
wwpLeosLdpSessionEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosLdpSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents information on a
|
|
single session between an LDP Entity and LDP Peer.
|
|
The information contained in a row is read-only.
|
|
|
|
Please note: the Path Vector Limit for the
|
|
Session is the value which is configured in
|
|
the corresponding mplsLdpEntityEntry. The
|
|
Peer's Path Vector Limit is in the
|
|
mplsLdpPeerPathVectorLimit object in the
|
|
mplsLdpPeerTable.
|
|
|
|
Values which may differ from those configured are
|
|
noted in the objects of this table, the
|
|
mplsLdpAtmSessionTable and the
|
|
mplsLdpFrameRelaySessionTable. A value will
|
|
differ if it was negotiated between the
|
|
Entity and the Peer. Values may or may not
|
|
be negotiated. For example, if the values
|
|
are the same then no negotiation takes place.
|
|
If they are negotiated, then they may differ."
|
|
INDEX { wwpLeosLdpEntityLdpId,
|
|
wwpLeosLdpEntityIndex,
|
|
wwpLeosLdpPeerLdpId }
|
|
::= { wwpLeosLdpSessionTable 1 }
|
|
|
|
WwpLeosLdpSessionEntry ::= SEQUENCE {
|
|
wwpLeosLdpEntityLdpId MplsLdpIdentifier,
|
|
wwpLeosLdpEntityIndex IndexInteger,
|
|
wwpLeosLdpPeerLdpId MplsLdpIdentifier,
|
|
wwpLeosLdpSessionConfiguredHoldTime Unsigned32,
|
|
wwpLeosLdpSessionPeerHoldTime Unsigned32,
|
|
wwpLeosLdpSessionHoldTimeInUse Unsigned32
|
|
}
|
|
|
|
|
|
wwpLeosLdpEntityLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LDP identifier. The first four octets encode an IP
|
|
address assigned to the LSR, and the last two octets
|
|
identify a specific label space within the LSR."
|
|
REFERENCE
|
|
"RFC3036, LDP Specification, Section on LDP Identifiers."
|
|
::= { wwpLeosLdpSessionEntry 1 }
|
|
|
|
wwpLeosLdpEntityIndex OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index is used as a secondary index to uniquely
|
|
identify this row. Before creating a row in this table,
|
|
the 'mplsLdpEntityIndexNext' object should be retrieved.
|
|
That value should be used for the value of this index
|
|
when creating a row in this table. NOTE: if a value
|
|
of zero (0) is retrieved, that indicates that no rows
|
|
can be created in this table at this time.
|
|
|
|
A secondary index (this object) is meaningful to some
|
|
but not all, LDP implementations. For example
|
|
an LDP implementation which uses PPP would
|
|
use this index to differentiate PPP sub-links.
|
|
|
|
Another way to use this index is to give this the
|
|
value of ifIndex. However, this is dependant
|
|
on the implementation.
|
|
|
|
This field is deprecated in the following tables provided
|
|
by DC-CR-LDP Session Controller.
|
|
|
|
- mplsLdpEntityTable.
|
|
- mplsLdpPeerTable.
|
|
|
|
In these tables the value of the Entity Index will always
|
|
be filled in to be 1."
|
|
::= { wwpLeosLdpSessionEntry 2 }
|
|
|
|
wwpLeosLdpPeerLdpId OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LDP identifier of this LDP Peer."
|
|
::= { wwpLeosLdpSessionEntry 3 }
|
|
|
|
wwpLeosLdpSessionConfiguredHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The locally configured keepalive hold time for this
|
|
session, in seconds. Note that the value of this field
|
|
reflects configuration at the time of session
|
|
initialization; this may differ from the configuration
|
|
that would apply to a new session, if configuration has
|
|
changed since this session was initialized."
|
|
::= { wwpLeosLdpSessionEntry 4 }
|
|
|
|
wwpLeosLdpSessionPeerHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer's advertised keepalive hold time for this session
|
|
in seconds. Note that the value of this field reflects
|
|
the peer's configuration at the time of session
|
|
initialization; this may differ from the configuration
|
|
that would apply to a new session, if the peer's
|
|
configuration has changed since this session was
|
|
initialized."
|
|
::= { wwpLeosLdpSessionEntry 5 }
|
|
|
|
wwpLeosLdpSessionHoldTimeInUse OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The keepalive hold time that is currently in use for this
|
|
session, in seconds."
|
|
::= { wwpLeosLdpSessionEntry 6 }
|
|
|
|
|
|
wwpLeosLdpHelloAdjacencyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosLdpHelloAdjacencyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Hello Adjacencies for Sessions."
|
|
::= { wwpLeosLdp 2 }
|
|
|
|
wwpLeosLdpHelloAdjacencyEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosLdpHelloAdjacencyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row represents a single LDP Hello Adjacency.
|
|
An LDP Session can have one or more Hello
|
|
Adjacencies."
|
|
INDEX { wwpLeosLdpEntityLdpId,
|
|
wwpLeosLdpEntityIndex,
|
|
wwpLeosLdpPeerLdpId,
|
|
wwpLeosLdpHelloAdjacencyIndex }
|
|
::= { wwpLeosLdpHelloAdjacencyTable 1 }
|
|
|
|
WwpLeosLdpHelloAdjacencyEntry ::= SEQUENCE {
|
|
wwpLeosLdpHelloAdjacencyIndex Unsigned32,
|
|
wwpLeosLdpHelloAdjacencyConfiguredHoldTime Unsigned32,
|
|
wwpLeosLdpHelloAdjacencyPeerHoldTime Unsigned32
|
|
}
|
|
|
|
wwpLeosLdpHelloAdjacencyIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identifier for this specific adjacency."
|
|
::= { wwpLeosLdpHelloAdjacencyEntry 1 }
|
|
|
|
wwpLeosLdpHelloAdjacencyConfiguredHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The locally configured hello hold time for this adjacency,
|
|
in seconds."
|
|
::= { wwpLeosLdpHelloAdjacencyEntry 2 }
|
|
|
|
wwpLeosLdpHelloAdjacencyPeerHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer's advertised hello hold time for this adjacency,
|
|
in seconds."
|
|
::= { wwpLeosLdpHelloAdjacencyEntry 3 }
|
|
|
|
|
|
wwpLeosLdpIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WwpLeosLdpIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of interfaces that LDP can be enabled on."
|
|
::= { wwpLeosLdp 3 }
|
|
|
|
wwpLeosLdpIfEntry OBJECT-TYPE
|
|
SYNTAX WwpLeosLdpIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WWP Descr."
|
|
INDEX { wwpLeosLdpIfIndex }
|
|
::= { wwpLeosLdpIfTable 1 }
|
|
|
|
WwpLeosLdpIfEntry ::= SEQUENCE {
|
|
wwpLeosLdpIfIndex INTEGER,
|
|
wwpLeosLdpIfName DisplayString,
|
|
wwpLeosLdpIfIpAddr IpAddress,
|
|
wwpLeosLdpIfAdminStatus INTEGER,
|
|
wwpLeosLdpIfOperStatus INTEGER
|
|
}
|
|
|
|
wwpLeosLdpIfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface Name"
|
|
::= { wwpLeosLdpIfEntry 1 }
|
|
|
|
wwpLeosLdpIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface Index"
|
|
::= { wwpLeosLdpIfEntry 2 }
|
|
|
|
wwpLeosLdpIfIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface IP Address"
|
|
::= { wwpLeosLdpIfEntry 3 }
|
|
|
|
wwpLeosLdpIfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Desired LDP status on this Interface"
|
|
::= { wwpLeosLdpIfEntry 4 }
|
|
|
|
wwpLeosLdpIfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LDP Operational Status on this Interface"
|
|
::= { wwpLeosLdpIfEntry 5 }
|
|
|
|
END
|
|
|
|
--
|
|
-- WWP-LEOS-LDP-MIB
|
|
--
|