1944 lines
67 KiB
Plaintext
1944 lines
67 KiB
Plaintext
-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00
|
|
|
|
|
|
-- (c) Copyright 2000-2014 bintec elmeg GmbH
|
|
-- All Rights reserved
|
|
-- $RCSfile: mib-mobile,v $
|
|
-- $Revision: 1.17 $
|
|
-- $Date: 2014-03-25 12:10:50 $
|
|
-- Author: Peter.Kietzmann@teldat.de
|
|
--------------------------------------------------------------------------
|
|
BINTEC-MOBILE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Integer32, Unsigned32, Counter32, Counter64, IpAddress, TimeTicks,
|
|
mib-2, enterprises
|
|
FROM SNMPv2-SMI
|
|
|
|
DisplayString, TimeStamp
|
|
FROM SNMPv2-TC
|
|
|
|
tty, Date, BitValue, HexValue
|
|
FROM BINTEC-MIB
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF;
|
|
|
|
|
|
mobileMIB MODULE-IDENTITY
|
|
LAST-UPDATED "2014032500Z"
|
|
ORGANIZATION "bintec elmeg GmbH"
|
|
CONTACT-INFO
|
|
"EMail: info@bintec-elmeg.com
|
|
Web: www.bintec-elmeg.com
|
|
"
|
|
DESCRIPTION
|
|
"MIB for GSM/UMTS/LTE-Modem support"
|
|
REVISION "2011012000Z"
|
|
DESCRIPTION
|
|
"MIB group for mobile devices.
|
|
Holds configuration information and statistic data."
|
|
::= { tty 4 }
|
|
|
|
mobile OBJECT IDENTIFIER ::= { mobileMIB 1 }
|
|
|
|
--
|
|
|
|
mobileDevCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileDevCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileDevCfgTable configures the detected mobile device
|
|
identified by the IMEI (International Mobile Equipment Identity).
|
|
"
|
|
::= { mobile 20 }
|
|
|
|
mobileDevCfgEntry OBJECT-TYPE
|
|
SYNTAX MobileDevCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileDevCfgTable entry.
|
|
"
|
|
INDEX { mobileDevCfgIMEI }
|
|
::= { mobileDevCfgTable 1 }
|
|
|
|
MobileDevCfgEntry ::=
|
|
SEQUENCE {
|
|
mobileDevCfgIMEI DisplayString,
|
|
mobileDevCfgInit DisplayString,
|
|
mobileDevCfgGPSEnable INTEGER,
|
|
mobileDevCfgModulation INTEGER
|
|
}
|
|
|
|
mobileDevCfgIMEI OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMEI (International Mobile Equipment Identity)
|
|
of the mobile device to configure.
|
|
"
|
|
::= { mobileDevCfgEntry 1 }
|
|
|
|
mobileDevCfgInit OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Additional Modem hardware init sequence.
|
|
This sequence will be send to the modem to initialize it.
|
|
Normally this string should be empty (un-used).
|
|
"
|
|
::= { mobileDevCfgEntry 2 }
|
|
|
|
mobileDevCfgGPSEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
delete(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables the creation and periodic update
|
|
of a mobileGPSInfoTable entry.
|
|
The UMTS Modem Hardware must support GPS functionality.
|
|
This is indicated by the Object `mobileStatGpsSupport'.
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { mobileDevCfgEntry 3 }
|
|
|
|
mobileDevCfgModulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1),
|
|
mdm-9600(2),
|
|
mdm-14400(3),
|
|
v110-9600(4),
|
|
v110-14400(5),
|
|
v120(6),
|
|
gprs(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Modulation to be used by the modem.
|
|
With auto(1) the modulation will be automatically chosen.
|
|
mdm_9600(2) sets the modulation to 9600 bps (V.32).
|
|
mdm_14400(3) sets the modulation to 14400 bps (V.34).
|
|
The values v110_9600(4) and v110_14400(5) set the
|
|
modulation to V110 encapsulation with the corresponding
|
|
speed (9600 or 14400 bps).
|
|
Setting the value to v120(6) v120 will be used.
|
|
If the value is set to gprs(7) the modulation for GSM
|
|
capable modems is taken from mobileConfigAccessType.
|
|
"
|
|
DEFVAL { auto }
|
|
::= { mobileDevCfgEntry 4 }
|
|
|
|
--
|
|
|
|
mobileSimCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileSimCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileSimCfgTable configures each corresponding
|
|
SIM-Card identified by the cards unique ICC-ID.
|
|
"
|
|
::= { mobile 21 }
|
|
|
|
mobileSimCfgEntry OBJECT-TYPE
|
|
SYNTAX MobileSimCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileSimCfgTable entry.
|
|
"
|
|
INDEX { mobileSimCfgIccId }
|
|
::= { mobileSimCfgTable 1 }
|
|
|
|
MobileSimCfgEntry ::=
|
|
SEQUENCE {
|
|
mobileSimCfgIccId DisplayString,
|
|
mobileSimCfgPIN DisplayString,
|
|
mobileSimCfgPUK DisplayString,
|
|
mobileSimCfgAPN DisplayString,
|
|
mobileSimCfgAccessMode INTEGER,
|
|
mobileSimCfgRoamingMode INTEGER,
|
|
mobileSimCfgRoamingPLMN INTEGER,
|
|
mobileSimCfgDispatch INTEGER,
|
|
mobileSimCfgGsmFallback DisplayString,
|
|
mobileSimCfgCugAddr IpAddress,
|
|
mobileSimCfgCugAuth INTEGER,
|
|
mobileSimCfgCugUser DisplayString,
|
|
mobileSimCfgCugPwd DisplayString,
|
|
mobileSimCfgOperatorScan INTEGER,
|
|
mobileSimCfgPinData OCTET STRING, -- FT special
|
|
mobileSimCfgCugAPN DisplayString
|
|
}
|
|
|
|
mobileSimCfgIccId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICC-ID of the used SIM-Card to configure.
|
|
|
|
Unfortunately some UMTS modem vendors offer no capability
|
|
to read this ID before entering the valid PIN :-(
|
|
"
|
|
::= { mobileSimCfgEntry 1 }
|
|
|
|
mobileSimCfgPIN OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PIN code of the SIM card. This is used to
|
|
authorize the access to the SIM-Card.
|
|
"
|
|
::= { mobileSimCfgEntry 2 }
|
|
|
|
mobileSimCfgPUK OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PUK code of the SIM card.
|
|
Needed in case of wrong PIN input for three times in a row.
|
|
"
|
|
::= { mobileSimCfgEntry 3 }
|
|
|
|
mobileSimCfgAPN OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GPRS APN (Access Point Name) used by this SIM-Card.
|
|
"
|
|
::= { mobileSimCfgEntry 4 }
|
|
|
|
mobileSimCfgAccessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
auto(1), -- factory default settings
|
|
gprs-only(2), -- GPRS only (no UMTS/LTE)
|
|
umts-only(3), -- UMTS only (no GPRS/LTE)
|
|
gprs-pref(4), -- GPRS preferred (Priority 2G/3G/xxx)
|
|
umts-pref(5), -- UMTS preferred (Priority 3G/2G/xxx)
|
|
delete(6),
|
|
lte-only(7), -- LTE only
|
|
lte-pref(8), -- LTE preferred (Priority 4G/3G/2G)
|
|
lte-umts(9), -- Priority 4G/3G, no GPRS
|
|
lte-gprs(10), -- Priority 4G/2G, no UMTS
|
|
lte-gprs-umts(11), -- Priority 4G/2G/3G
|
|
umts-lte(12), -- Priority 3G/4G, no GPRS
|
|
umts-gprs(13), -- Priority 3G/2G, no LTE
|
|
umts-lte-gprs(14), -- Priority 3G/4G/2G
|
|
gprs-lte(15), -- Priority 2G/4G, no UMTS
|
|
gprs-umts(16), -- Priority 2G/3G, no LTE
|
|
gprs-lte-umts(17) -- Priority 2G/4G/3G
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default Access Type to be used by the GPRS/UMTS/LTE Modem.
|
|
This setting depends on local network availability and
|
|
therefore it's bound to the network operator specific
|
|
SIM-Card. Possible settings are:
|
|
auto(1) -- factory default settings
|
|
gprs-only(2) -- GPRS only (no UMTS/LTE)
|
|
umts-only(3) -- UMTS only (no GPRS/LTE)
|
|
gprs-pref(4) -- GPRS preferred (Priority 2G/3G/xxx)
|
|
umts-pref(5) -- UMTS preferred (Priority 3G/2G/xxx)
|
|
lte-only(7) -- LTE only
|
|
lte-pref(8) -- LTE preferred (Priority 4G/3G/2G)
|
|
lte-umts(9) -- Priority 4G/3G, no GPRS
|
|
lte-gprs(10) -- Priority 4G/2G, no UMTS
|
|
lte-gprs-umts(11) -- Priority 4G/2G/3G
|
|
umts-lte(12) -- Priority 3G/4G, no GPRS
|
|
umts-gprs(13) -- Priority 3G/2G, no LTE
|
|
umts-lte-gprs(14) -- Priority 3G/4G/2G
|
|
gprs-lte(15) -- Priority 2G/4G, no UMTS
|
|
gprs-umts(16) -- Priority 2G/3G, no LTE
|
|
gprs-lte-umts(17) -- Priority 2G/4G/3G
|
|
Not all possible settings make sense and/or are supported
|
|
by all LTE capable Modems.
|
|
"
|
|
DEFVAL { auto }
|
|
::= { mobileSimCfgEntry 5 }
|
|
|
|
mobileSimCfgRoamingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
auto(2),
|
|
unrestricted(3),
|
|
international(4),
|
|
national(5),
|
|
fixed(6),
|
|
full-auto(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Roaming configuration for this mobile interface.
|
|
Possible values are:
|
|
disabled - no roaming at all
|
|
auto - roaming decision by modems factory defaults
|
|
unrestricted - no restrictions for roaming decision
|
|
international - international roaming only
|
|
national - national roaming only
|
|
fixed - use mobileConfigRoamingPLMN exclusively
|
|
full-auto - let the modem select the roaming partner
|
|
"
|
|
DEFVAL { auto }
|
|
::= { mobileSimCfgEntry 6 }
|
|
|
|
mobileSimCfgRoamingPLMN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLMN (Public Land Mobile Netword) code used for Roaming.
|
|
Used only if mobileDevCfgRoamingMode_fixed is selected.
|
|
"
|
|
::= { mobileSimCfgEntry 7 }
|
|
|
|
mobileSimCfgDispatch OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ppp(1), -- route call to PPP daemon
|
|
isdnlogin(2), -- route call to ISDNlogin daemon
|
|
none(3), -- ignore incoming calls
|
|
ppp-modem(13),
|
|
ppp-v110-1200(15),
|
|
ppp-v110-2400(16),
|
|
ppp-v110-4800(17),
|
|
ppp-v110-9600(18),
|
|
ppp-v110-14400(19),
|
|
ppp-v110-19200(20),
|
|
ppp-v110-38400(21),
|
|
ppp-v120(23),
|
|
ppp-modem-profile-1(26),
|
|
ppp-modem-profile-2(27),
|
|
ppp-modem-profile-3(28),
|
|
ppp-modem-profile-4(29),
|
|
ppp-modem-profile-5(30),
|
|
ppp-modem-profile-6(31),
|
|
ppp-modem-profile-7(32),
|
|
ppp-modem-profile-8(33),
|
|
ipsec(60)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dispatch service the Modem should be used for.
|
|
The SIM-Card should support/enable basic functionality
|
|
to use the service (eg access circuit switched networks
|
|
to use V.110 and/or V.120).
|
|
Routing tasks (IP, IPX, X.25, bridging, ...) should use ppp(1).
|
|
For isdnlogin program use the isdnlogin(2) item.
|
|
For IPSec callback use item ipsec(60).
|
|
"
|
|
DEFVAL { isdnlogin }
|
|
::= { mobileSimCfgEntry 8 }
|
|
|
|
mobileSimCfgGsmFallback OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the Router is called using the GsmFallback number
|
|
the actual connection is dropped and the Access Type
|
|
is switched back from UMTS to GSM.
|
|
"
|
|
::= { mobileSimCfgEntry 9 }
|
|
|
|
-- Closed User Group handling
|
|
|
|
mobileSimCfgCugAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The provider assigned IP-Address if any.
|
|
"
|
|
::= { mobileSimCfgEntry 15 }
|
|
|
|
mobileSimCfgCugAuth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
pap(2),
|
|
chap(3),
|
|
pap-chap(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication method to be used.
|
|
"
|
|
DEFVAL { pap-chap }
|
|
::= { mobileSimCfgEntry 16 }
|
|
|
|
mobileSimCfgCugUser OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The provider assigned user name.
|
|
"
|
|
::= { mobileSimCfgEntry 17 }
|
|
|
|
mobileSimCfgCugPwd OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The provider assigned password.
|
|
"
|
|
::= { mobileSimCfgEntry 18 }
|
|
|
|
mobileSimCfgOperatorScan OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
never(1),
|
|
startup(2),
|
|
always(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Handling of scanning available Providers (PLMN)
|
|
never - use only home or fixed PLMN
|
|
startup - scan on startup, only for information
|
|
always - used for using roaming PLMN outside own country
|
|
"
|
|
DEFVAL { never }
|
|
::= { mobileSimCfgEntry 19 }
|
|
|
|
-- Hidden Data
|
|
|
|
mobileSimCfgPinData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not accessible entry for storing the PIN permanently.
|
|
This is a security feature (?) used by France Telecom.
|
|
"
|
|
::= { mobileSimCfgEntry 20 }
|
|
|
|
mobileSimCfgCugAPN OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Closed User Group authentication APN,
|
|
may be different from registration APN.
|
|
"
|
|
::= { mobileSimCfgEntry 21 }
|
|
|
|
|
|
mobileStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileStatTable holds statistics about the actually
|
|
detected and/or used mobile device.
|
|
"
|
|
::= { mobile 22 }
|
|
|
|
mobileStatEntry OBJECT-TYPE
|
|
SYNTAX MobileStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileStatTable entry.
|
|
"
|
|
INDEX { mobileStatIfIndex }
|
|
::= { mobileStatTable 1 }
|
|
|
|
MobileStatEntry ::=
|
|
SEQUENCE {
|
|
mobileStatIfIndex INTEGER,
|
|
-- Hardware dependent dynamic objects
|
|
mobileStatOperStatus INTEGER,
|
|
mobileStatErrorCode INTEGER,
|
|
mobileStatCommand DisplayString,
|
|
mobileStatAnswer DisplayString,
|
|
mobileStatInDiscards INTEGER,
|
|
-- Network dependent dynamic objects
|
|
mobileStatSelectedPLMN INTEGER,
|
|
mobileStatNetwork DisplayString,
|
|
mobileStatLocationAreaCode DisplayString,
|
|
mobileStatCellId DisplayString,
|
|
mobileStatAccessType INTEGER,
|
|
mobileStatCSQ INTEGER,
|
|
mobileStatBand INTEGER,
|
|
-- Hardware dependent static objects
|
|
mobileStatIMEI DisplayString,
|
|
mobileStatCtrlIfIndex INTEGER,
|
|
mobileStatGpsSupport INTEGER,
|
|
mobileStatLteSupport INTEGER,
|
|
mobileStatSmsStorageBits BITS,
|
|
-- SIM card dependent static objects
|
|
mobileStatIccId DisplayString,
|
|
mobileStatHomePLMN INTEGER,
|
|
mobileStatSubscriberNumber DisplayString,
|
|
mobileStatServiceCenterAddr DisplayString,
|
|
-- Administrative special Action
|
|
mobileStatAction INTEGER,
|
|
mobileStatATexec DisplayString
|
|
|
|
}
|
|
|
|
mobileStatIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the corresponding TTY interface.
|
|
"
|
|
::= { mobileStatEntry 1 }
|
|
|
|
-- Hardware dependent dynamic objects
|
|
|
|
mobileStatOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
init(3),
|
|
called(4),
|
|
calling(5),
|
|
connect(6),
|
|
simwait(7),
|
|
pinwait(8),
|
|
error(9),
|
|
disconnected(10),
|
|
pukwait(11),
|
|
regwait(12),
|
|
apnwait(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of the GSM modem. The following
|
|
states can occur:
|
|
- up(1) the device is up - initialization finished
|
|
- down(2) the device is down
|
|
- init(3) initialization state
|
|
- called(4) incoming call received
|
|
- calling(5) dialout is performed
|
|
- connect(6) connection established
|
|
- simwait(7) modem is detected - SIM card not ready
|
|
- pinwait(8) modem is waiting for non-empty PIN entry
|
|
- error(9) error - for details consult ErrorCode
|
|
- disconnected(10) the device isn't available (unplugged)
|
|
- pukwait(11) waiting for PUK entry after PIN invalidated
|
|
- regwait(12) wating for network operator registration
|
|
- apnwait(13) waiting for APN entry if APN is empty
|
|
The initial OperStatus is down(2).
|
|
"
|
|
DEFVAL { down }
|
|
::= { mobileStatEntry 2 }
|
|
|
|
mobileStatErrorCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
unspecified(2),
|
|
pinerror(3),
|
|
pukerror(4),
|
|
apnerror(5),
|
|
simerror(6),
|
|
reg-denied(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If an error occurs (OperStatus is set to error) this variable
|
|
shows the reason for the error. Currently the following error
|
|
codes are possible:
|
|
- none(1) no error occured
|
|
- unspecified(2) error can't be specified any further
|
|
- pinerror(3) PIN was wrong PUK needed
|
|
- pukerror(4) PUK was wrong
|
|
- apnerror(5) APN was wrong
|
|
- simerror(6) SIM card not present or damaged
|
|
- reg-denied(7) Network registration denied
|
|
The initial ErrorCode is none(1).
|
|
"
|
|
DEFVAL { none }
|
|
::= { mobileStatEntry 3 }
|
|
|
|
mobileStatCommand OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..60))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last command that was sent to the mobile device.
|
|
"
|
|
::= { mobileStatEntry 4 }
|
|
|
|
mobileStatAnswer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..60))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last answer received from the mobile device.
|
|
"
|
|
::= { mobileStatEntry 5 }
|
|
|
|
mobileStatInDiscards OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames which can't be enqueued upstream.
|
|
"
|
|
::= { mobileStatEntry 6 }
|
|
|
|
-- Network dependent dynamic objects
|
|
|
|
mobileStatSelectedPLMN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLMN (Public Land Mobile Network) code of the Network
|
|
currently selected.
|
|
"
|
|
::= { mobileStatEntry 7 }
|
|
|
|
mobileStatNetwork OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..60))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the PLMN (Public Land Mobile Network)
|
|
actually being used.
|
|
"
|
|
::= { mobileStatEntry 8 }
|
|
|
|
mobileStatLocationAreaCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual Location Area Code the UMTS-Modem is registered.
|
|
"
|
|
::= { mobileStatEntry 9 }
|
|
|
|
mobileStatCellId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual Cell-ID the UMTS-Modem is registered.
|
|
"
|
|
::= { mobileStatEntry 10 }
|
|
|
|
mobileStatAccessType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
gsm(2),
|
|
compact-gsm(3),
|
|
umts(4),
|
|
gsm-edge(5),
|
|
umts-hsdpa(6),
|
|
umts-hsupa(7),
|
|
umts-hspa(8),
|
|
lte(9),
|
|
hspa-plus(10),
|
|
cdma-rev0(11),
|
|
cdma-revA(12),
|
|
cdma-revB(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Type the modem actually registers on.
|
|
Normally the `edge' or `hs*pa' Access Types aren't
|
|
provided in detail by the network operator and/or modem.
|
|
Possible Access Types are:
|
|
unknown(1)
|
|
gsm(2) -- GSM
|
|
compact-gsm(3) -- CGSM
|
|
umts(4) -- UMTS
|
|
gsm-edge(5) -- GPRS/EDGE
|
|
umts-hsdpa(6) -- HSDPA
|
|
umts-hsupa(7) -- HSUPA
|
|
umts-hspa(8) -- HSPA
|
|
lte(9) -- LTE
|
|
hspa-plus(10) -- HSPA+
|
|
cdma-rev0(11) -- CDMA 1xEV-DO Rev. 0
|
|
cdma-revA(12) -- CDMA 1xEV-DO Rev. A
|
|
cdma-revB(13) -- CDMA 1xEV-DO Rev. B
|
|
"
|
|
DEFVAL { unknown }
|
|
::= { mobileStatEntry 11 }
|
|
|
|
mobileStatCSQ OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GSM receive signal level in decibel (db).
|
|
A value below -100 signals a very low signal quality.
|
|
A value between -100 and -80 means that signal quality is low.
|
|
If the value is between -80 and -70 the quality is ok. The
|
|
interval from -70 to -60 signals a good quality and if the
|
|
value is above -60 the quality is excellent. The default e.g.
|
|
initial value is -113.
|
|
"
|
|
::= { mobileStatEntry 12 }
|
|
|
|
mobileStatBand OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cdma-band-0(0), -- CDMA Band Class 0
|
|
cdma-band-1(1), -- CDMA Band Class 1
|
|
cdma-band-3(3), -- CDMA Band Class 3
|
|
cdma-band-4(4), -- CDMA Band Class 4
|
|
cdma-band-5(5), -- CDMA Band Class 5
|
|
cdma-band-6(6), -- CDMA Band Class 6
|
|
cdma-band-7(7), -- CDMA Band Class 7
|
|
cdma-band-8(8), -- CDMA Band Class 8
|
|
cdma-band-9(9), -- CDMA Band Class 9
|
|
cdma-band-10(10), -- CDMA Band Class 10
|
|
cdma-band-11(11), -- CDMA Band Class 11
|
|
cdma-band-12(12), -- CDMA Band Class 12
|
|
cdma-band-13(13), -- CDMA Band Class 13
|
|
cdma-band-14(14), -- CDMA Band Class 14
|
|
cdma-band-15(15), -- CDMA Band Class 15
|
|
cdma-band-16(16), -- CDMA Band Class 16
|
|
gsm-450(40), -- GSM 450
|
|
gsm-480(41), -- GSM 480
|
|
gsm-750(42), -- GSM 750
|
|
gsm-850(43), -- GSM 850
|
|
gsm-900-ext(44), -- GSM 900 (Extended)
|
|
gsm-900-pri(45), -- GSM 900 (Primary)
|
|
gsm-900-rway(46), -- GSM 900 (Railways)
|
|
gsm-1800(47), -- GSM 1800
|
|
gsm-1900(48), -- GSM 1900
|
|
wcdma-2100(80), -- WCDMA 2100
|
|
wcdma-pcs-1900(81), -- WCDMA PCS 1900
|
|
wcdma-dcs-1800(82), -- WCDMA DCS 1800
|
|
wcdma-1700-us(83), -- WCDMA 1700 (US)
|
|
wcdma-650(84), -- WCDMA 850
|
|
wcdma-800(85), -- WCDMA 800
|
|
wcdma-2600(86), -- WCDMA 2600
|
|
wcdma-900(87), -- WCDMA 900
|
|
wcdma-1700-jp(88), -- WCDMA 1700 (Japan)
|
|
e-utra-band-1(120), -- LTE E-UTRA Band 1
|
|
e-utra-band-2(121), -- LTE E-UTRA Band 2
|
|
e-utra-band-3(122), -- LTE E-UTRA Band 3
|
|
e-utra-band-4(123), -- LTE E-UTRA Band 4
|
|
e-utra-band-5(124), -- LTE E-UTRA Band 5
|
|
e-utra-band-6(125), -- LTE E-UTRA Band 6
|
|
e-utra-band-7(126), -- LTE E-UTRA Band 7
|
|
e-utra-band-8(127), -- LTE E-UTRA Band 8
|
|
e-utra-band-9(128), -- LTE E-UTRA Band 9
|
|
e-utra-band-10(129),-- LTE E-UTRA Band 10
|
|
e-utra-band-11(130),-- LTE E-UTRA Band 11
|
|
e-utra-band-12(131),-- LTE E-UTRA Band 12
|
|
e-utra-band-13(132),-- LTE E-UTRA Band 13
|
|
e-utra-band-14(133),-- LTE E-UTRA Band 14
|
|
e-utra-band-17(134),-- LTE E-UTRA Band 17
|
|
e-utra-band-33(135),-- LTE E-UTRA Band 33
|
|
e-utra-band-34(136),-- LTE E-UTRA Band 34
|
|
e-utra-band-35(137),-- LTE E-UTRA Band 35
|
|
e-utra-band-36(138),-- LTE E-UTRA Band 36
|
|
e-utra-band-47(139),-- LTE E-UTRA Band 37
|
|
e-utra-band-38(140),-- LTE E-UTRA Band 38
|
|
e-utra-band-39(141),-- LTE E-UTRA Band 39
|
|
e-utra-band-40(142),-- LTE E-UTRA Band 40
|
|
e-utra-band-18(143),-- LTE E-UTRA Band 18
|
|
e-utra-band-19(144),-- LTE E-UTRA Band 19
|
|
e-utra-band-20(145),-- LTE E-UTRA Band 20
|
|
e-utra-band-21(146),-- LTE E-UTRA Band 21
|
|
unknown(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Band Class currently used.
|
|
"
|
|
DEFVAL { unknown }
|
|
::= { mobileStatEntry 21 }
|
|
|
|
-- Hardware dependent static objects
|
|
|
|
mobileStatIMEI OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IMEI (International Mobile Equipment Identity)
|
|
of the detected mobile device.
|
|
"
|
|
::= { mobileStatEntry 13 }
|
|
|
|
mobileStatCtrlIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the UMTS card provides several channels and one could
|
|
be used to control the card e.g. get status information
|
|
from the card like the signal quality a dedicated daemon
|
|
uses the mobileStatCtrlIfIndex for this purpose.
|
|
If mobileStatCtrlIfIndex is set to 0 no interface
|
|
is available for this task.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { mobileStatEntry 14 }
|
|
|
|
mobileStatGpsSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
available(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signals for configuration software if the hardware
|
|
is capable to deliver GPS information.
|
|
- none(1) no GPS support
|
|
- available(2) GPS support available
|
|
"
|
|
DEFVAL { none }
|
|
::= { mobileStatEntry 15 }
|
|
|
|
mobileStatLteSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
available(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signals for configuration software if the hardware
|
|
is capable to attach to LTE networks.
|
|
- none(1) no LTE support
|
|
- available(2) LTE support available
|
|
"
|
|
DEFVAL { none }
|
|
::= { mobileStatEntry 20 }
|
|
|
|
mobileStatSmsStorageBits OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
sm(1), -- use SIM card storage
|
|
me(2), -- use Mobile Equipment storage
|
|
mt(3), -- use one of the ME associated storages
|
|
bm(4), -- use Broadcast Message storage
|
|
ta(5), -- use Terminal Adapter storage
|
|
sr(6) -- use Status Report storage
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SMS storage types supported by the modem hardware."
|
|
::= { mobileStatEntry 22 }
|
|
|
|
-- SIM card dependent static objects
|
|
|
|
mobileStatIccId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICC-ID of the SIM-Card found in the mobile device
|
|
which is actually enumerated with mobileStatIfIndex.
|
|
|
|
Some UMTS modem vendors offer no capability to
|
|
read this ID before entering a valid PIN :-(
|
|
In this case the default configuration is choosen.
|
|
"
|
|
::= { mobileStatEntry 16 }
|
|
|
|
mobileStatHomePLMN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLMN (Public Land Mobile Network) code of the Home PLMN.
|
|
"
|
|
::= { mobileStatEntry 17 }
|
|
|
|
mobileStatSubscriberNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Subscriber Number stored on the SIM card.
|
|
"
|
|
::= { mobileStatEntry 18 }
|
|
|
|
mobileStatServiceCenterAddr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service Center Address stored on the SIM card.
|
|
"
|
|
::= { mobileStatEntry 19 }
|
|
|
|
mobileStatAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
reset(2),
|
|
qmi(3),
|
|
dip(4),
|
|
dhcprelay(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Perform extern triggered Action on sierra wireless modems
|
|
- idle no waiting Action
|
|
- reset reset the modem
|
|
- qmi switch modem into qmi mode
|
|
- dip switch modem into direct IP mode
|
|
- dhcprelay enable DHCP relay through the modem
|
|
"
|
|
DEFVAL { idle }
|
|
::= { mobileStatEntry 23 }
|
|
|
|
mobileStatATexec OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Perform a User requested AT Command in idle state"
|
|
DEFVAL { "" }
|
|
::= { mobileStatEntry 24 }
|
|
|
|
|
|
--
|
|
mobileOperatorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileOperatorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileOperatorTable shows the actually available
|
|
network provider and the registration status.
|
|
"
|
|
::= { mobile 23 }
|
|
|
|
mobileOperatorEntry OBJECT-TYPE
|
|
SYNTAX MobileOperatorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileOperatorTable entry.
|
|
"
|
|
INDEX { mobileOperatorIfIndex, mobileOperatorCode, mobileOperatorAcT }
|
|
::= { mobileOperatorTable 1 }
|
|
|
|
MobileOperatorEntry ::=
|
|
SEQUENCE {
|
|
mobileOperatorIfIndex INTEGER,
|
|
mobileOperatorCode INTEGER,
|
|
mobileOperatorAcT INTEGER,
|
|
mobileOperatorStatus INTEGER,
|
|
mobileOperatorName DisplayString,
|
|
mobileOperatorPriority INTEGER,
|
|
mobileOperatorPreference INTEGER,
|
|
mobileOperatorCurrentOrder INTEGER
|
|
}
|
|
|
|
mobileOperatorIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the corresponding TTY interface.
|
|
"
|
|
::= { mobileOperatorEntry 1 }
|
|
|
|
mobileOperatorCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLMN code of the network operator.
|
|
"
|
|
::= { mobileOperatorEntry 2 }
|
|
|
|
mobileOperatorAcT OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
gsm(2),
|
|
compact-gsm(3),
|
|
umts(4),
|
|
gsm-edge(5),
|
|
umts-hsdpa(6),
|
|
umts-hsupa(7),
|
|
umts-hspa(8),
|
|
lte(9),
|
|
hspa-plus(10),
|
|
cdma-rev0(11),
|
|
cdma-revA(12),
|
|
cdma-revB(13)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Type the modem actually registers on.
|
|
Normally the `edge' or `hs*pa' Access Types aren't
|
|
provided in detail by the network operator and/or modem.
|
|
Possible Access Types are:
|
|
unknown(1)
|
|
gsm(2) -- GSM
|
|
compact-gsm(3) -- CGSM
|
|
umts(4) -- UMTS
|
|
gsm-edge(5) -- GPRS/EDGE
|
|
umts-hsdpa(6) -- HSDPA
|
|
umts-hsupa(7) -- HSUPA
|
|
umts-hspa(8) -- HSPA
|
|
lte(9) -- LTE
|
|
hspa-plus(10) -- HSPA+
|
|
cdma-rev0(11) -- CDMA 1xEV-DO Rev. 0
|
|
cdma-revA(12) -- CDMA 1xEV-DO Rev. A
|
|
cdma-revB(13) -- CDMA 1xEV-DO Rev. B
|
|
"
|
|
DEFVAL { gsm }
|
|
::= { mobileOperatorEntry 3 }
|
|
|
|
mobileOperatorStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
available(2),
|
|
current(3),
|
|
forbidden(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The registration status depending on the network operator.
|
|
The following states can occur:
|
|
- unknown(1) -- no idea
|
|
- available(2) -- registration possible
|
|
- current(3) -- successfully registered
|
|
- forbidden(4) -- no roaming possible
|
|
"
|
|
DEFVAL { unknown }
|
|
::= { mobileOperatorEntry 4 }
|
|
|
|
mobileOperatorName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..60))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the network operator.
|
|
"
|
|
::= { mobileOperatorEntry 5 }
|
|
|
|
mobileOperatorPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Priority of the Operator to use in roaming mode. There are
|
|
different priority value ranges for the following types of
|
|
operator entries:
|
|
|
|
- Home Operator (from SIM card)
|
|
- Priviledged Operator (from SIM card)
|
|
- Administrative Operator
|
|
- Preferred Operator
|
|
- Practicable Operator
|
|
|
|
The start and the size of each priority range is predefined but
|
|
variable and will be configurable in future via the global
|
|
mobile settings.
|
|
"
|
|
DEFVAL { 256 }
|
|
::= { mobileOperatorEntry 6 }
|
|
|
|
mobileOperatorPreference OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
home(1),
|
|
privileged(2),
|
|
preferred(3),
|
|
practicable(4),
|
|
banned(5),
|
|
administrative(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The registration priority for the network operator.
|
|
The following states can occur:
|
|
- home(1) -- home operator
|
|
- privileged(2) -- home operators best roaming partner
|
|
- preferred(3) -- home operators roaming partner
|
|
- practicable(4) -- roaming possible but not preferred
|
|
- banned(5) -- no roaming to this operator possible
|
|
- administrative(6) -- configured via mobileAdmOperatorTable
|
|
"
|
|
DEFVAL { banned }
|
|
::= { mobileOperatorEntry 7 }
|
|
|
|
mobileOperatorCurrentOrder OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The order of the entry in the currently used internal roaming
|
|
list, the value '-1' indicates an unused (ignored) entry.
|
|
"
|
|
DEFVAL { -1 }
|
|
::= { mobileOperatorEntry 8 }
|
|
|
|
|
|
--
|
|
|
|
mobileSmsSendTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileSmsSendEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileSmsSendTable holds all information to send
|
|
a SMS (Short Message Service) via a GSM/UMTS modem.
|
|
"
|
|
::= { mobile 24 }
|
|
|
|
mobileSmsSendEntry OBJECT-TYPE
|
|
SYNTAX MobileSmsSendEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileSmsSendTable entry.
|
|
This entry is temporary until it's successfully sent.
|
|
After being successfully sent this entry is copied to
|
|
the mobileSmsTable. Since the GSM/UMTS modem stores
|
|
the SMS internally or on the SIM-Card this table
|
|
is a NOSAVE table.
|
|
"
|
|
INDEX { mobileSmsSendId }
|
|
::= { mobileSmsSendTable 1 }
|
|
|
|
MobileSmsSendEntry ::=
|
|
SEQUENCE {
|
|
mobileSmsSendId INTEGER,
|
|
mobileSmsSendIfIndex INTEGER,
|
|
mobileSmsSendMsgStorage INTEGER,
|
|
mobileSmsSendMsgSlot INTEGER,
|
|
mobileSmsSendMsgStatus INTEGER,
|
|
mobileSmsSendDestAddr DisplayString,
|
|
mobileSmsSendMsgFormat INTEGER,
|
|
mobileSmsSendMsgCoding INTEGER,
|
|
mobileSmsSendMsgData OCTET STRING
|
|
}
|
|
|
|
mobileSmsSendId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique ID generated by the application
|
|
which triggers the SMS send request.
|
|
"
|
|
::= { mobileSmsSendEntry 1 }
|
|
|
|
mobileSmsSendIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the mobile device
|
|
which should transmit the SMS.
|
|
"
|
|
::= { mobileSmsSendEntry 2 }
|
|
|
|
mobileSmsSendMsgStorage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sm(1), -- use SIM card storage
|
|
me(2) -- use Mobile Equipment storage
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the storage which holds the SMS.
|
|
Available storages are:
|
|
sm(1) -- SIM card storage
|
|
me(2) -- Mobile Equipment storage
|
|
The default of this object is 'me' because mobile
|
|
equipment offers more storage normally.
|
|
"
|
|
DEFVAL { me }
|
|
::= { mobileSmsSendEntry 3 }
|
|
|
|
mobileSmsSendMsgSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual index to address the SMS in 'mobileSmsSendMsgStorage'.
|
|
This index is returned by the mobile device after the store
|
|
operation is successfully finished.
|
|
"
|
|
DEFVAL { -1 }
|
|
::= { mobileSmsSendEntry 4 }
|
|
|
|
mobileSmsSendMsgStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transmit(1), -- start transmission
|
|
success(2), -- transmission successful
|
|
error(3), -- transmission failed
|
|
delete(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Status of the SMS.
|
|
To start transmission of the SMS set Status to `transmit(1)'.
|
|
|
|
On successful transmission the Status is set to `success(2)'.
|
|
Afterwards the SMS is moved to the 'mobileSmsTable'.
|
|
|
|
When transmission fails the Status changes to `error(3)'.
|
|
The SMS stays in 'mobileSmsSendTable' for retransmissions.
|
|
|
|
If the SMS should be deleted from the 'mobileSmsSendTable'
|
|
and the mobile device storage specified in
|
|
'mobileSmsSendMsgStorage' the Status should be set to `delete(5)'.
|
|
"
|
|
DEFVAL { transmit }
|
|
::= { mobileSmsSendEntry 5 }
|
|
|
|
mobileSmsSendDestAddr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address of this SMS.
|
|
"
|
|
::= { mobileSmsSendEntry 6 }
|
|
|
|
mobileSmsSendMsgFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pdu(1),
|
|
txt(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The message format of the SMS.
|
|
Traditional SMS use plain `txt(2)' format.
|
|
Special or Unicode SMS use `pdu(1)' format.
|
|
"
|
|
DEFVAL { txt }
|
|
::= { mobileSmsSendEntry 7 }
|
|
|
|
mobileSmsSendMsgCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ira(1), -- International Reference Alphabet
|
|
gsm(2), -- GSM 03.38 7 bit default alphabet
|
|
ucs2(3), -- unicode 16 bit
|
|
pc437(4),
|
|
iso8859-1(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the coding of the SMS user data section.
|
|
"
|
|
DEFVAL { iso8859-1 }
|
|
::= { mobileSmsSendEntry 8 }
|
|
|
|
mobileSmsSendMsgData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..160))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The raw text data of the SMS depending on the coding.
|
|
"
|
|
::= { mobileSmsSendEntry 9 }
|
|
|
|
--
|
|
|
|
mobileSmsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileSmsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileSmsTable holds all SMS (Short Message Service)
|
|
which are stored in the GSM/UMTS modem and/or on the SIM-
|
|
Card used.
|
|
"
|
|
::= { mobile 25 }
|
|
|
|
mobileSmsEntry OBJECT-TYPE
|
|
SYNTAX MobileSmsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileSmsTable entry.
|
|
Each entry is a copy of a SMS stored in the GSM/UMTS modem
|
|
and/or on the SIM-Card used.
|
|
Status information like 'received-unread', 'received-read',
|
|
'stored-unsent' and 'stored-sent' is additionally available.
|
|
After being successfully sent an entry in the
|
|
mobileSmsSendTable is moved to the mobileSmsTable.
|
|
Since space in the GSM/UMTS modem and SIM-Card is limited
|
|
applications have to delete entries from time to time.
|
|
"
|
|
INDEX { mobileSmsIfIndex, mobileSmsMsgStorage, mobileSmsMsgSlot }
|
|
::= { mobileSmsTable 1 }
|
|
|
|
MobileSmsEntry ::=
|
|
SEQUENCE {
|
|
mobileSmsIfIndex INTEGER,
|
|
mobileSmsMsgStorage INTEGER,
|
|
mobileSmsMsgSlot INTEGER,
|
|
mobileSmsMsgStatus INTEGER,
|
|
mobileSmsServiceCenterTimeStamp DisplayString,
|
|
mobileSmsServiceCenterAddress DisplayString,
|
|
mobileSmsPhoneNumber DisplayString,
|
|
mobileSmsMsgFormat INTEGER,
|
|
mobileSmsMsgCoding INTEGER,
|
|
mobileSmsMsgData OCTET STRING
|
|
}
|
|
|
|
mobileSmsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the mobile device
|
|
which received the SMS or should transmit it.
|
|
"
|
|
::= { mobileSmsEntry 1 }
|
|
|
|
mobileSmsMsgStorage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sm(1), -- use SIM card storage
|
|
me(2), -- use Mobile Equipment storage
|
|
mt(3), -- use one of the ME associated storages
|
|
bm(4), -- use Broadcast Message storage
|
|
ta(5), -- use Terminal Adapter storage
|
|
sr(6) -- use Status Report storage
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the storage which holds the SMS.
|
|
Available storages are:
|
|
sm(1) -- SIM card storage
|
|
me(2) -- Mobile Equipment storage
|
|
mt(3) -- one of the ME associated storages
|
|
bm(4) -- Broadcast Message storage
|
|
ta(5) -- Terminal Adapter storage
|
|
sr(6) -- Status Report storage
|
|
"
|
|
::= { mobileSmsEntry 2 }
|
|
|
|
mobileSmsMsgSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual index to address the SMS in 'mobileSmsMsgStorage'.
|
|
"
|
|
::= { mobileSmsEntry 3 }
|
|
|
|
mobileSmsMsgStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rec-unread(1), -- received unread
|
|
rec-read(2), -- received read
|
|
sto-unsent(3), -- stored unsent
|
|
sto-sent(4), -- stored sent
|
|
delete(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the SMS.
|
|
The first four states correspond with 3GPP TS27.005.
|
|
For incoming SMS the Status is set to `rec-unread(1)'.
|
|
After reading the SMS the Status is set to `rec-read(2)'.
|
|
On storing one SMS for sending the Status is `sto-unsent(3)'.
|
|
If SMS was sent successfully Status changes to `sto-sent(4)'.
|
|
|
|
In order to delete the SMS permanently set Status to `delete(5)'.
|
|
This object can only be set to `delete'.
|
|
Other settings are ignored silently.
|
|
"
|
|
::= { mobileSmsEntry 4 }
|
|
|
|
mobileSmsServiceCenterTimeStamp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date/time the SMS is sent or received.
|
|
"
|
|
::= { mobileSmsEntry 5 }
|
|
|
|
mobileSmsServiceCenterAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service Center Address used to send or receive this SMS.
|
|
"
|
|
::= { mobileSmsEntry 6 }
|
|
|
|
mobileSmsPhoneNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The origination or destination address of this SMS
|
|
depending on the value of 'mobileSmsMsgStatus'.
|
|
"
|
|
::= { mobileSmsEntry 7 }
|
|
|
|
mobileSmsMsgFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pdu(1),
|
|
txt(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The message format of the SMS.
|
|
Traditional SMS use plain `txt(2)' format.
|
|
Special or Unicode SMS use `pdu(1)' format.
|
|
"
|
|
DEFVAL { pdu }
|
|
::= { mobileSmsEntry 8 }
|
|
|
|
mobileSmsMsgCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ira(1), -- International Reference Alphabet
|
|
gsm(2), -- GSM 03.38 7 bit default alphabet
|
|
ucs2(3), -- unicode 16 bit
|
|
pc437(4),
|
|
iso8859-1(5),
|
|
uh-7bit(6), -- user header with 7 bit encoding
|
|
uh-8bit(7) -- user header with 8 bit encoding
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the coding of the SMS user data section.
|
|
"
|
|
DEFVAL { ira }
|
|
::= { mobileSmsEntry 9 }
|
|
|
|
mobileSmsMsgData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..160))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The raw data of the complete SMS.
|
|
"
|
|
::= { mobileSmsEntry 10 }
|
|
|
|
--
|
|
|
|
mobileGPSInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileGPSInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileGPSInfoTable shows the actually available
|
|
GPS information if supported by the Hardware.
|
|
"
|
|
::= { mobile 26 }
|
|
|
|
mobileGPSInfoEntry OBJECT-TYPE
|
|
SYNTAX MobileGPSInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileGPSInfoTable entry.
|
|
"
|
|
INDEX { mobileGPSInfoIfIndex }
|
|
::= { mobileGPSInfoTable 1 }
|
|
|
|
MobileGPSInfoEntry ::=
|
|
SEQUENCE {
|
|
mobileGPSInfoIfIndex INTEGER,
|
|
mobileGPSInfoOperStatus INTEGER,
|
|
mobileGPSInfoDate DisplayString,
|
|
mobileGPSInfoTime DisplayString,
|
|
mobileGPSInfoLatitude DisplayString,
|
|
mobileGPSInfoLongitude DisplayString,
|
|
mobileGPSInfoSpeedOverGround INTEGER,
|
|
mobileGPSInfoNumberOfSatelites INTEGER
|
|
}
|
|
|
|
mobileGPSInfoIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the corresponding TTY interface.
|
|
"
|
|
::= { mobileGPSInfoEntry 1 }
|
|
|
|
mobileGPSInfoOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
down(2),
|
|
init(3),
|
|
up(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation status of the UMTS modems internal GPS module.
|
|
The following states can occur:
|
|
- unknown(1) -- initialization failed
|
|
- down(2) -- GPS module disabled
|
|
- init(3) -- GPS module is looking for satelites
|
|
- up(4) -- GPS module is providing GPS info
|
|
"
|
|
DEFVAL { unknown }
|
|
::= { mobileGPSInfoEntry 2 }
|
|
|
|
mobileGPSInfoDate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual date calculated from GPS info.
|
|
"
|
|
::= { mobileGPSInfoEntry 3 }
|
|
|
|
mobileGPSInfoTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual time calculated from GPS info.
|
|
"
|
|
::= { mobileGPSInfoEntry 4 }
|
|
|
|
mobileGPSInfoLatitude OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual Latitude calculated from GPS info.
|
|
"
|
|
::= { mobileGPSInfoEntry 5 }
|
|
|
|
mobileGPSInfoLongitude OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual Longitude calculated from GPS info.
|
|
"
|
|
::= { mobileGPSInfoEntry 6 }
|
|
|
|
mobileGPSInfoSpeedOverGround OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actually detected Speed over Ground.
|
|
"
|
|
::= { mobileGPSInfoEntry 7 }
|
|
|
|
mobileGPSInfoNumberOfSatelites OBJECT-TYPE
|
|
SYNTAX INTEGER (0..34)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of satelites actually found by the GPS module.
|
|
"
|
|
::= { mobileGPSInfoEntry 8 }
|
|
|
|
--
|
|
|
|
mobilePLMNTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobilePLMNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobilePLMNTable holds the PLMN (Public Land
|
|
Mobile Network) codes known by the mobile device.
|
|
This table is used to translate PLMN code into name.
|
|
"
|
|
::= { mobile 27 }
|
|
|
|
mobilePLMNEntry OBJECT-TYPE
|
|
SYNTAX MobilePLMNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobilePLMNTable entry.
|
|
"
|
|
INDEX { mobilePLMNCode }
|
|
::= { mobilePLMNTable 1 }
|
|
|
|
MobilePLMNEntry ::=
|
|
SEQUENCE {
|
|
mobilePLMNCode INTEGER,
|
|
mobilePLMNName DisplayString
|
|
}
|
|
|
|
mobilePLMNCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLMN (Public Land Mobile Network) code of the network operator.
|
|
This code is merged from the MCC (Mobile Country Code)
|
|
and MNC (Mobile Network Code) of the network operator.
|
|
"
|
|
::= { mobilePLMNEntry 1 }
|
|
|
|
mobilePLMNName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the network operator.
|
|
"
|
|
::= { mobilePLMNEntry 2 }
|
|
|
|
--
|
|
|
|
mobileOperatorPLMNTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileOperatorPLMNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileOperatorPLMNTable shows the Operator_controlled_PLMN
|
|
(Public Land Mobile Networks) codes accessible by the SIM-Card.
|
|
"
|
|
::= { mobile 28 }
|
|
|
|
mobileOperatorPLMNEntry OBJECT-TYPE
|
|
SYNTAX MobileOperatorPLMNEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileOperatorPLMNTable entry.
|
|
"
|
|
INDEX { mobileOperatorPLMNIccId, mobileOperatorPLMNCode }
|
|
::= { mobileOperatorPLMNTable 1 }
|
|
|
|
MobileOperatorPLMNEntry ::=
|
|
SEQUENCE {
|
|
mobileOperatorPLMNIccId DisplayString,
|
|
mobileOperatorPLMNCode INTEGER,
|
|
mobileOperatorPLMNName DisplayString,
|
|
mobileOperatorPLMNAllowGSM INTEGER,
|
|
mobileOperatorPLMNAllowUMTS INTEGER
|
|
}
|
|
|
|
mobileOperatorPLMNIccId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICC-ID of the SIM-Card.
|
|
The Operator PLMN List is copied from this SIM-Card.
|
|
"
|
|
::= { mobileOperatorPLMNEntry 1 }
|
|
|
|
mobileOperatorPLMNCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLMN Code is built from a 3 digit MCC (Mobile Country
|
|
Code) and 2 or 3 digit MNC (Mobile Network Code).
|
|
"
|
|
::= { mobileOperatorPLMNEntry 2 }
|
|
|
|
mobileOperatorPLMNName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the network operator.
|
|
"
|
|
::= { mobileOperatorPLMNEntry 3 }
|
|
|
|
mobileOperatorPLMNAllowGSM OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allowed(1),
|
|
denied(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Right to register to GSM Access Technology.
|
|
"
|
|
DEFVAL { allowed }
|
|
::= { mobileOperatorPLMNEntry 4 }
|
|
|
|
mobileOperatorPLMNAllowUMTS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allowed(1),
|
|
denied(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Right to register to UMTS Access Technology.
|
|
"
|
|
DEFVAL { allowed }
|
|
::= { mobileOperatorPLMNEntry 5 }
|
|
|
|
--
|
|
|
|
mobilePdpContextTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobilePdpContextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobilePdpContextTable shows the PDP (Packet Data Protocol)
|
|
context stored in the detected mobile device. The mobile device
|
|
is identified by the unique IMEI (International Mobile Equipment
|
|
Identity).
|
|
"
|
|
::= { mobile 29 }
|
|
|
|
mobilePdpContextEntry OBJECT-TYPE
|
|
SYNTAX MobilePdpContextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobilePdpContextTable entry.
|
|
"
|
|
INDEX { mobilePdpContextIndex }
|
|
::= { mobilePdpContextTable 1 }
|
|
|
|
MobilePdpContextEntry ::=
|
|
SEQUENCE {
|
|
mobilePdpContextIndex INTEGER,
|
|
mobilePdpContextIfIndex INTEGER,
|
|
mobilePdpContextPrimaryId INTEGER,
|
|
mobilePdpContextSecondaryId INTEGER,
|
|
mobilePdpContextType INTEGER,
|
|
mobilePdpContextAPN DisplayString,
|
|
mobilePdpContextPreferredAddress DisplayString,
|
|
mobilePdpContextDataCompression INTEGER,
|
|
mobilePdpContextHeaderCompression INTEGER
|
|
}
|
|
|
|
mobilePdpContextIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique index for this entry.
|
|
"
|
|
::= { mobilePdpContextEntry 1 }
|
|
|
|
mobilePdpContextIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of the corresponding TTY interface.
|
|
"
|
|
::= { mobilePdpContextEntry 2 }
|
|
|
|
mobilePdpContextPrimaryId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary PDP context identifier.
|
|
"
|
|
::= { mobilePdpContextEntry 3 }
|
|
|
|
mobilePdpContextSecondaryId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the secondary PDP context identifier (non-zero).
|
|
In case of a primary PDP context this object is zero.
|
|
"
|
|
::= { mobilePdpContextEntry 4 }
|
|
|
|
mobilePdpContextType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4(1),
|
|
ppp(2),
|
|
ipv6(3),
|
|
ipv4v6(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol type of the PDP context.
|
|
This object is unused in case of a secondary PDP context.
|
|
"
|
|
DEFVAL { ppp }
|
|
::= { mobilePdpContextEntry 5 }
|
|
|
|
mobilePdpContextAPN OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The APN (Access Point Name) used by the PDP context.
|
|
This object is unused in case of a secondary PDP context.
|
|
"
|
|
::= { mobilePdpContextEntry 6 }
|
|
|
|
mobilePdpContextPreferredAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preferred (IP-)Address assigned to the PDP context.
|
|
"
|
|
::= { mobilePdpContextEntry 7 }
|
|
|
|
mobilePdpContextDataCompression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1), -- default, if value is unspecified
|
|
on(2), -- manufacturer preferred compression
|
|
v42bis(3),
|
|
v44(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data compression used for data connections.
|
|
This object is normally unused in 2G/3G/4G networks.
|
|
"
|
|
DEFVAL { off }
|
|
::= { mobilePdpContextEntry 8 }
|
|
|
|
mobilePdpContextHeaderCompression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1), -- default, if value is unspecified
|
|
on(2), -- manufacturer preferred compression
|
|
rfc1144(3),
|
|
rfc2507(4),
|
|
rfc3095(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The header compression used for data connections.
|
|
This object is normally unused in 2G/3G/4G networks.
|
|
"
|
|
DEFVAL { off }
|
|
::= { mobilePdpContextEntry 9 }
|
|
--
|
|
mobileAdmOperatorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MobileAdmOperatorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mobileAdmOperatorTable shows the configured preferred PLMNs.
|
|
"
|
|
::= { mobile 30 }
|
|
|
|
mobileAdmOperatorEntry OBJECT-TYPE
|
|
SYNTAX MobileAdmOperatorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single mobileAdmOperatorTable entry.
|
|
"
|
|
INDEX { mobileAdmOperatorIccId, mobileAdmOperatorCode }
|
|
::= { mobileAdmOperatorTable 1 }
|
|
|
|
MobileAdmOperatorEntry ::=
|
|
SEQUENCE {
|
|
mobileAdmOperatorIccId DisplayString,
|
|
mobileAdmOperatorCode INTEGER,
|
|
mobileAdmOperatorName DisplayString,
|
|
mobileAdmOperatorAcT BITS,
|
|
mobileAdmOperatorPriority INTEGER,
|
|
mobileAdmOperatorStatus INTEGER
|
|
}
|
|
|
|
mobileAdmOperatorIccId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ICC-ID of the SIM-Card.
|
|
The operator is assigned to this SIM Id.
|
|
"
|
|
::= { mobileAdmOperatorEntry 1 }
|
|
|
|
mobileAdmOperatorCode OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PLMN Code is built from a 3 digit MCC (Mobile Country
|
|
Code) and 2 or 3 digit MNC (Mobile Network Code).
|
|
"
|
|
::= { mobileAdmOperatorEntry 2 }
|
|
|
|
mobileAdmOperatorName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the network operator.
|
|
"
|
|
::= { mobileAdmOperatorEntry 3 }
|
|
|
|
mobileAdmOperatorAcT OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
gsm(1),
|
|
umts(2),
|
|
lte(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AcT defines the Access technologies
|
|
gsm - G2 connectivity
|
|
umts - G3 connectivity
|
|
lte - G4 connectivity
|
|
"
|
|
::= { mobileAdmOperatorEntry 4 }
|
|
|
|
mobileAdmOperatorPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value represents the relative priority of this entry.
|
|
it is added to the admistrative base priority (see
|
|
'mobileOperatorPriority') to be used afterwards for the operator
|
|
selection procedure. Under normal circumstances it's intended
|
|
that this resulting priority is higher than the priority values
|
|
associated with the priviledged and preferred operators read
|
|
from SIM card.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { mobileAdmOperatorEntry 5 }
|
|
|
|
mobileAdmOperatorStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
permit(1), -- PLMN is preferred used for roaming
|
|
deny(2), -- PLMN is not allowed for usage
|
|
delete(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operator's status.
|
|
permit - the operator is allowed for roaming.
|
|
deny - the operator is forbidden to use.
|
|
delete - delete this entry
|
|
"
|
|
DEFVAL { permit }
|
|
::= { mobileAdmOperatorEntry 6 }
|
|
|
|
END
|