WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/bintec/BIANCA-BRICK-WIRELESS-CONTROLLER-MIB

5534 lines
163 KiB
Plaintext
Raw Blame History

-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00
---------------------------------------------------------------------------
-- (C)opyright 2006-2014 bintec elmeg GmbH
-- $RCSfile: mib-wlc,v $
-- $Revision: 1.32 $
-- $Date: 2014-02-25 14:13:25 $
---------------------------------------------------------------------------
BIANCA-BRICK-WIRELESS-CONTROLLER-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises
FROM RFC1155-SMI
IpAddress, enterprises
FROM RFC1155-SMI
MacAddress, DisplayString
FROM SNMPv2-TC
bibo, BitValue, Date
FROM BINTEC-MIB
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Counter64,
TimeTicks, Unsigned32
FROM SNMPv2-SMI
TRAP-TYPE
FROM RFC-1215
TruthValue, RowStatus
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
OBJECT-TYPE
FROM RFC-1212
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
wlanControllerMIB MODULE-IDENTITY
LAST-UPDATED "201402240000Z"
ORGANIZATION "bintec elmeg GmbH"
CONTACT-INFO
"EMail: info@bintec-elmeg.com
Web: www.bintec-elmeg.com
"
DESCRIPTION
"MIB for WLAN controller"
REVISION "200912160000Z"
DESCRIPTION
"Wireless LAN Controller MIB."
REVISION "201202150000Z"
DESCRIPTION
"Change Default SSID from Funkwerk-ec to default."
REVISION "201303050000Z"
DESCRIPTION
"Added airtime fairness, band steering and blacklisting."
REVISION "201308160000Z"
DESCRIPTION
"Added support for CAPWAP auto configuration."
::= { bibo 61 }
wlc OBJECT IDENTIFIER
::= { wlanControllerMIB 1 }
-- Interfaces Group
-- Management Information for the WLAN Subsystem
-- **********************************************************************
-- * Textual conventions
-- **********************************************************************
WlanRSSI ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is used to represent receiver input levels in dBm."
SYNTAX INTEGER (-110..0)
WlanRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is used to represent WLAN data rates in 500 Kbps units."
SYNTAX INTEGER (0..600)
-- **********************************************************************
-- * wlcACTable TABLE
-- **********************************************************************
wlcAC OBJECT IDENTIFIER
::= { wlc 1 }
wlcACAdminStatus OBJECT-TYPE
SYNTAX INTEGER { master(1), slave(2), disabled(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global AC switch, that defines the role of this device.
"
DEFVAL { disabled }
::= { wlcAC 1 }
wlcACOperStatus OBJECT-TYPE
SYNTAX INTEGER { master(1), slave(2), disabled(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the current
AC operation state.
"
DEFVAL { disabled }
::= { wlcAC 2 }
wlcACMaxNoWTP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max number of WTPs that the AC can handle.
"
DEFVAL { 0 }
::= { wlcAC 3 }
wlcACIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface index where the AC is listening.
"
DEFVAL { 0 }
::= { wlcAC 4 }
wlcACDebugLevel OBJECT-TYPE
SYNTAX INTEGER { off(1), normal(2), verbose(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WLAN Controller degugging verbosity level. With a higher value
more debugging information will be created.
Default is normal(2).
"
DEFVAL { normal }
::= { wlcAC 5 }
wlcACAction OBJECT-TYPE
SYNTAX INTEGER { idle(1),
channel-selecting(2),
start-scanning(3),
scanning(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this variable to channel_selecting(2) a successive
channel reallocation is issued.
Setting this variable to start_scanning(3) a successive
neighborhood scan on all active radios is initialised.
After all radios are set to client mode it is switched to
scanning(4) by system. On all operations switching back to idle(1)
indicates that the operation has finished.
Default is idle(1).
"
DEFVAL { idle }
::= { wlcAC 6 }
wlcACInitType OBJECT-TYPE
SYNTAX INTEGER { simultaneous(1), successive(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether initialisation of WTPs is
done simultaneous(1) (more than one is initialised at the
same time) or successive(2) (one after the other).
Default is simultaneous(1).
"
DEFVAL { simultaneous }
::= { wlcAC 7 }
wlcACNoSimultaneousInit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute defines how many WTPs can be initialised
simultaneously in wlcACInitType_simultaneous.
A value of 0 defines that all WTPs can be initialised at the same time.
Default is 10.
"
DEFVAL { 10 }
::= { wlcAC 8 }
wlcACStatisticsTimer OBJECT-TYPE
SYNTAX INTEGER
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This timer defines the interval statistics are sent from WTP to AC.
Default is 30.
"
DEFVAL { 30 }
::= { wlcAC 9 }
wlcACBintecConfigTimer OBJECT-TYPE
SYNTAX INTEGER
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This timer defines how long a WTP waits for the next bintec config
message before it supposes the AC to be down.
Default is 10.
"
DEFVAL { 10 }
::= { wlcAC 10 }
wlcACLostACLifetime OBJECT-TYPE
SYNTAX INTEGER
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This timer defines in seconds how long a WTP still hold its configuration
after he has lost the connection to its AC.
The value -1 means endless. Default is 0, which means the WTP reboots
immediately after loosing the connection.
"
DEFVAL { 0 }
::= { wlcAC 11 }
wlcACLedMode OBJECT-TYPE
SYNTAX INTEGER { normal(1), minimal(2), off(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Choose one of the following LED-Modes for all manages WTPs:
normal : LEDs work normal,
minimal : only Status-LED blinks once in a second,
off := LEDs are off.
"
DEFVAL { normal }
::= { wlcAC 12 }
wlcACScanResultsMaxAge OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a scan result wasn't seen for so many seconds,
it will be removed from wlcScanResultsTable."
DEFVAL { 3600 }
::= { wlcAC 13 }
-- **********************************************************************
-- * wlcACAddressTable TABLE
-- **********************************************************************
wlcACAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcACAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the IP address type
and the IP address of the AC
"
::= { wlc 2 }
wlcACAddressEntry OBJECT-TYPE
SYNTAX WlcACAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcACAddressIndex }
::= { wlcACAddressTable 1 }
WlcACAddressEntry ::=
SEQUENCE {
wlcACAddressIndex INTEGER,
wlcACAddressInetType InetAddressType,
wlcACAddressInetAddress IpAddress,
wlcACAddressAdminStatus INTEGER
}
wlcACAddressIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index of an accessible AC.
"
::= { wlcACAddressEntry 1 }
wlcACAddressInetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address type.
Possible values are:
-unknown(0): an unknown address type
-ipv4(1) : an IPv4 address
-ipv6(2) : an IPv6 address
-ipv4z(3) : a non-global IPv4 address including a zone
index
-ipv6z(4) : a non-global IPv6 address including a zone
index
-dns(16) : a DNS domain name
"
::= { wlcACAddressEntry 2 }
wlcACAddressInetAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the accessbile AC.
"
::= { wlcACAddressEntry 3 }
wlcACAddressAdminStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable, disable or delete the requested AC address.
"
DEFVAL { enabled }
::= { wlcACAddressEntry 4 }
-- **********************************************************************
-- * wlcWTPTable TABLE
-- **********************************************************************
wlcWTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcWTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcWTPTable contains information relating to the WTPs
currently managed by our Access Controller (AC).
Each entry corresponds to a managed Wireless Termination Point
(WTP). Entries can be added or deleted by the user.
"
::= { wlc 3 }
wlcWTPEntry OBJECT-TYPE
SYNTAX WlcWTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcWTPIndex }
::= { wlcWTPTable 1 }
WlcWTPEntry ::=
SEQUENCE {
wlcWTPIndex INTEGER,
wlcWTPAdminStatus INTEGER,
wlcWTPOperStatus INTEGER,
wlcWTPMacAddress MacAddress,
wlcWTPDescription DisplayString,
wlcWTPName DisplayString,
wlcWTPLocation DisplayString,
wlcWTPAdminSwVer DisplayString,
wlcWTPEncryption INTEGER,
wlcWTPTriggerStat INTEGER,
wlcWTPsecIndex INTEGER,
wlcWTPauthEapolIndex INTEGER,
wlcWTPglobalIndex INTEGER,
wlcWTPradiusSrvIndex INTEGER,
wlcWTPlogHostIndex INTEGER,
wlcWTPscheduleIndex INTEGER,
wlcWTPlocalServicesIndex INTEGER
}
wlcWTPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index for the WTP.
"
::= { wlcWTPEntry 1 }
wlcWTPAdminStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable, disable or delete the requested WTP.
"
DEFVAL { enabled }
::= { wlcWTPEntry 2 }
wlcWTPOperStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
enabled(2),
initialising(3),
no-license-available(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This notification shows if the WTP
is currently operative.
"
DEFVAL { disabled }
::= { wlcWTPEntry 3 }
wlcWTPMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"First ethernet MAC address of the WTP.
"
::= { wlcWTPEntry 4 }
wlcWTPDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description of the requested WTP.
"
::= { wlcWTPEntry 5 }
wlcWTPName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the requested WTP.
"
::= { wlcWTPEntry 6 }
wlcWTPLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Location of the requested WTP.
"
::= { wlcWTPEntry 7 }
wlcWTPAdminSwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable displays the current software version
of each WTP
"
::= { wlcWTPEntry 8 }
wlcWTPEncryption OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the encryption between AC and WTP.
"
DEFVAL { enabled }
::= { wlcWTPEntry 9 }
wlcWTPTriggerStat OBJECT-TYPE
SYNTAX INTEGER { idle(1), update(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this variable to update(2) the WTP is triggered to send
statistics (VSS, ACLDenied, stations, ...).
After the trigger is sent it is switched back to idle(1).
Default is idle(1).
"
DEFVAL { idle }
::= { wlcWTPEntry 10 }
wlcWTPsecIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured secIndex
of the requested WTP.
"
::= { wlcWTPEntry 11 }
wlcWTPauthEapolIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured EapolIndex
of the requested WTP.
"
::= { wlcWTPEntry 12 }
wlcWTPglobalIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured globalIndex
of the requested WTP.
"
::= { wlcWTPEntry 13 }
wlcWTPradiusSrvIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured radiusSrvIndex
of the requested WTP.
"
::= { wlcWTPEntry 14 }
wlcWTPlogHostIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured logHostIndex
of the requested WTP.
"
::= { wlcWTPEntry 15 }
wlcWTPscheduleIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured scheduleIndex
of the requested WTP.
"
::= { wlcWTPEntry 16 }
wlcWTPlocalServicesIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured localServicesIndex
of the requested WTP.
"
::= { wlcWTPEntry 17 }
-- OBSOLETED wlcWTPMaxRetransmit ::= { wlcWTPEntry 18 }
-- OBSOLETED wlcWTPRetransmitInterval ::= { wlcWTPEntry 19 }
-- OBSOLETED wlcWTPEchoInterval ::= { wlcWTPEntry 20 }
-- OBSOLETED wlcWTPStatisticsTimer ::= { wlcWTPEntry 21 }
-- OBSOLETED wlcWTPBintecConfigTimer ::= { wlcWTPEntry 22 }
-- **********************************************************************
-- * wlcWTPMaintenanceTable TABLE
-- **********************************************************************
wlcWTPMaintenanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcWTPMaintenanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table delivers maintenance/debugging actions
executed on the WTP
"
::= { wlc 4 }
wlcWTPMaintenanceEntry OBJECT-TYPE
SYNTAX WlcWTPMaintenanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcWTPMaintenanceIndex }
::= { wlcWTPMaintenanceTable 1 }
WlcWTPMaintenanceEntry ::=
SEQUENCE {
wlcWTPMaintenanceIndex INTEGER,
wlcWTPMaintenanceState INTEGER,
wlcWTPMaintenanceCommand INTEGER,
wlcWTPMaintenanceURL DisplayString
}
wlcWTPMaintenanceIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index of WTP to be addressed with maintenance command.
"
::= { wlcWTPMaintenanceEntry 1 }
wlcWTPMaintenanceState OBJECT-TYPE
SYNTAX INTEGER { idle(1),
start(2),
running(3),
done(4),
error(5),
stopped(6),
rebooting(7),
delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable displays the current maintenance state
of each WTP:
idle: idle state
start: start maintenance event (get state file or do update)
running: maintenance event is running
rebooting: WTP is rebooting with new image,
done: maintenance event successfully finished
error: an error occured,
stopped: WTP already has the image version
delete: delete maintenance event.
"
DEFVAL { idle }
::= { wlcWTPMaintenanceEntry 2 }
wlcWTPMaintenanceCommand OBJECT-TYPE
SYNTAX INTEGER { state(1),
software(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of action performed on WTP
software: software update
state: get state file
"
DEFVAL { software }
::= { wlcWTPMaintenanceEntry 3 }
wlcWTPMaintenanceURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Contains URL of the http or tftp server.
Depending on wlcWTPMaintenanceCommand it serves for either
destination (command state) or source (command software).
"
::= { wlcWTPMaintenanceEntry 4 }
-- removed: wlcWTPMaintenanceOptions ::= { wlcWTPMaintenanceEntry 5 }
-- **********************************************************************
-- * wlcSecProfileTable TABLE
-- **********************************************************************
wlcSecProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcSecProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcSecProfileTable describes profiles
for different security settings.
"
::= { wlc 5 }
wlcSecProfileEntry OBJECT-TYPE
SYNTAX WlcSecProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcSecProfileIndex }
::= { wlcSecProfileTable 1 }
WlcSecProfileEntry ::=
SEQUENCE {
wlcSecProfileIndex INTEGER,
wlcSecProfileAdminStatus INTEGER,
wlcSecProfileAdminCommunity DisplayString,
wlcSecProfileReadCommunity DisplayString,
wlcSecProfileWriteCommunity DisplayString
}
wlcSecProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index of a security profile.
"
::= { wlcSecProfileEntry 1 }
wlcSecProfileAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delete the requestes security profile.
"
DEFVAL { enabled }
::= { wlcSecProfileEntry 2 }
wlcSecProfileAdminCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Community name used for admin access.
"
::= { wlcSecProfileEntry 3 }
wlcSecProfileReadCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Community name used for read-only access.
"
::= { wlcSecProfileEntry 4 }
wlcSecProfileWriteCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Community name used for read-write access.
"
::= { wlcSecProfileEntry 5 }
-- **********************************************************************
-- * wlcRadiusSrvTable TABLE
-- **********************************************************************
wlcRadiusSrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcRadiusSrvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table combines WTP with the RADIUS service profile.
"
::= { wlc 6 }
wlcRadiusSrvEntry OBJECT-TYPE
SYNTAX WlcRadiusSrvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcRadiusSrvIndex }
::= { wlcRadiusSrvTable 1 }
WlcRadiusSrvEntry ::=
SEQUENCE {
wlcRadiusSrvIndex INTEGER,
wlcRadiusSrvAdminStatus INTEGER,
wlcRadiusSrvProfIndex INTEGER
}
wlcRadiusSrvIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique WTP index.
"
::= { wlcRadiusSrvEntry 1 }
wlcRadiusSrvAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delete the RADIUS service profile
from the requested WTP.
"
DEFVAL { enabled }
::= { wlcRadiusSrvEntry 2 }
wlcRadiusSrvProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique RADIUS
service profile index.
"
::= { wlcRadiusSrvEntry 3 }
-- **********************************************************************
-- * wlcRadiusSrvProfileTable TABLE
-- **********************************************************************
wlcRadiusSrvProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcRadiusSrvProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcRadiusSrvProfileTable describes different
RADIUS service profiles.
"
::= { wlc 7 }
wlcRadiusSrvProfileEntry OBJECT-TYPE
SYNTAX WlcRadiusSrvProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcRadiusSrvProfileIndex }
::= { wlcRadiusSrvProfileTable 1 }
WlcRadiusSrvProfileEntry ::=
SEQUENCE {
wlcRadiusSrvProfileIndex INTEGER,
wlcRadiusSrvProfileAddressType InetAddressType,
wlcRadiusSrvProfileAddress IpAddress,
wlcRadiusSrvProfilePort INTEGER,
wlcRadiusSrvProfileSecret DisplayString,
wlcRadiusSrvProfilePriority INTEGER,
wlcRadiusSrvProfileTimeout INTEGER,
wlcRadiusSrvProfileRetries INTEGER,
wlcRadiusSrvProfileState INTEGER,
wlcRadiusSrvProfileKeepAlive TruthValue
}
wlcRadiusSrvProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index of a RADIUS service profile.
"
::= { wlcRadiusSrvProfileEntry 1 }
wlcRadiusSrvProfileAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address type of the requested RADIUS service
can be:
-unknown(0): an unknown address type
-ipv4(1) : an IPv4 address
-ipv6(2) : an IPv6 address
-ipv4z(3) : a non-global IPv4 address including a zone
index
-ipv6z(4) : a non-global IPv6 address including a zone
index
-dns(16) : a DNS domain name
"
::= { wlcRadiusSrvProfileEntry 2 }
wlcRadiusSrvProfileAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS Server IP Address.
"
::= { wlcRadiusSrvProfileEntry 3 }
wlcRadiusSrvProfilePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS server authentication port.
Please notice that RFC2138 assigns ports 1812 and 1813
for authentication and accounting, respectively. Many
RADIUS servers still use the formerly assigned ports 1645
and 1646 instead. The default value is 1812.
"
DEFVAL { 1812 }
::= { wlcRadiusSrvProfileEntry 4 }
wlcRadiusSrvProfileSecret OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shared secret between RADIUS server and Brick.
"
::= { wlcRadiusSrvProfileEntry 5 }
wlcRadiusSrvProfilePriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS server with the lowest priority is the first
used for request. If there is no response (see also the
values Timeout and Retries) the RADIUS server with the
next lowest priority will be used.
"
::= { wlcRadiusSrvProfileEntry 6 }
wlcRadiusSrvProfileTimeout OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of milliseconds (1/1000s) waiting for an
outstanding request.
"
::= { wlcRadiusSrvProfileEntry 7 }
wlcRadiusSrvProfileRetries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of retries sent for each request, until the
server state is set to inactive. Default value is 1.
To prevent the radiusSrvState ever switch to inactive,
set this value to 0.
"
DEFVAL { 1 }
::= { wlcRadiusSrvProfileEntry 8 }
wlcRadiusSrvProfileState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2),
disabled(3),
delete(32)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operational, the server state is active(1).
If the RADIUS server does not respond, its state is set
to inactive(2). The administrator can set the state
manually to disabled(3), or delete(32) the entry.
"
DEFVAL { active }
::= { wlcRadiusSrvProfileEntry 9 }
wlcRadiusSrvProfileKeepAlive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the periodicaly keep alive check of 'inactive'
(see radiusSrvState) server.
"
DEFVAL { true }
::= { wlcRadiusSrvProfileEntry 10 }
-- **********************************************************************
-- * wlcAuthEapolProfileTable TABLE
-- **********************************************************************
wlcAuthEapolProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcAuthEapolProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcRadiusSrvProfileTable describes
different auth eapol profiles.
"
::= { wlc 8 }
wlcAuthEapolProfileEntry OBJECT-TYPE
SYNTAX WlcAuthEapolProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcAuthEapolProfileIndex }
::= { wlcAuthEapolProfileTable 1 }
WlcAuthEapolProfileEntry ::=
SEQUENCE {
wlcAuthEapolProfileIndex INTEGER,
wlcAuthEapolProfileAdminStatus INTEGER,
wlcAuthEapolProfilePTK1Timeout INTEGER,
wlcAuthEapolProfilePTK3Timeout INTEGER,
wlcAuthEapolProfileGTKTimeout INTEGER,
wlcAuthEapolProfilePairwiseUpdateCount INTEGER,
wlcAuthEapolProfileGroupUpdateCount INTEGER,
wlcAuthEapolProfileAuthPeriod INTEGER,
wlcAuthEapolProfileQuietPeriod INTEGER,
wlcAuthEapolProfileTxPeriod INTEGER,
wlcAuthEapolProfileSuppTimeout INTEGER,
wlcAuthEapolProfileReAuthPeriod INTEGER,
wlcAuthEapolProfileReAuthEnabled TruthValue,
wlcAuthEapolProfileMaxReq INTEGER,
wlcAuthEapolProfileKeyTxEnabled TruthValue
}
wlcAuthEapolProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index of a auth eapol profile.
"
::= { wlcAuthEapolProfileEntry 1 }
wlcAuthEapolProfileAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delete the requested auth eapol profile.
"
DEFVAL { enabled }
::= { wlcAuthEapolProfileEntry 2 }
wlcAuthEapolProfilePTK1Timeout OBJECT-TYPE
SYNTAX INTEGER (100..30000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time after which the first EAPOL-key Message in the pairwise
temporal key negotiation phase (PTK1) is retransmitted if
there is no reply from supplicant.
Time can be changed in steps of 100 milliseconds.
"
DEFVAL { 100 }
::= { wlcAuthEapolProfileEntry 3 }
wlcAuthEapolProfilePTK3Timeout OBJECT-TYPE
SYNTAX INTEGER (100..30000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time after which the third EAPOL-key Message in the pairwise
temporal key negotiation phase (PTK3) is retransmitted if
there is no reply from supplicant.
Time can be changed in steps of 100 milliseconds.
"
DEFVAL { 100 }
::= { wlcAuthEapolProfileEntry 4 }
wlcAuthEapolProfileGTKTimeout OBJECT-TYPE
SYNTAX INTEGER (100..30000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time after which the first EAPOL-key Message in the group
temporal key negotiation phase (GTK) is retransmitted if
there is no reply from supplicant.
Time can be changed in steps of 100 milliseconds.
"
DEFVAL { 500 }
::= { wlcAuthEapolProfileEntry 5 }
wlcAuthEapolProfilePairwiseUpdateCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times EAPOL Message 1 and Message 3 in the
pairwise temporal key negotiation phase (PTK) will be
retried.
"
DEFVAL { 3 }
::= { wlcAuthEapolProfileEntry 6 }
wlcAuthEapolProfileGroupUpdateCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of times Message 1 in the group temporal key
negotiation phase (GTK) will be retried.
"
DEFVAL { 3 }
::= { wlcAuthEapolProfileEntry 7 }
wlcAuthEapolProfileAuthPeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time after a disassociation/deauthentication
should be committed by the client if there is no
EAPOL Message from authenticator.
Time can be changed in steps of 1 seconds.
"
DEFVAL { 30 }
::= { wlcAuthEapolProfileEntry 8 }
wlcAuthEapolProfileQuietPeriod OBJECT-TYPE
SYNTAX INTEGER
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Period of time during which the authenticator will
not attempt to acquire a supplicant.
Time can be changed in steps of 1 seconds.
Default value is 60 seconds.
"
DEFVAL { 60 }
::= { wlcAuthEapolProfileEntry 9 }
wlcAuthEapolProfileTxPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A period used by the authenticator PAE state machine
to determine when an EAPOL PDU is to be transmitted.
Time can be changed in steps of 1 seconds.
Default value is 30 seconds.
"
DEFVAL { 30 }
::= { wlcAuthEapolProfileEntry 10 }
wlcAuthEapolProfileSuppTimeout OBJECT-TYPE
SYNTAX INTEGER (1..3600)
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A timeout used by the backend authentication state machine
in order to determine timeout conditions in the exchanges
between the authenticator and the supplicant.
Time can be changed in steps of 1 seconds.
Default value is 30 seconds.
"
DEFVAL { 30 }
::= { wlcAuthEapolProfileEntry 11 }
wlcAuthEapolProfileReAuthPeriod OBJECT-TYPE
SYNTAX INTEGER
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A period used by the reauthentication timer state machine
to determine when reauthentication of the supplicant takes place.
Time can be changed in steps of 1 seconds.
Default value is 3600 seconds.
"
DEFVAL { 3600 }
::= { wlcAuthEapolProfileEntry 12 }
wlcAuthEapolProfileReAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state variable reAuthEnabled controls
whether periodic reauthentication takes place.
Default value is false.
"
DEFVAL { false }
::= { wlcAuthEapolProfileEntry 13 }
wlcAuthEapolProfileMaxReq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of times that the state machine will
retransmit an EAP Request packet to the supplicant before
it times out the authentication session.
Default value is 2.
"
DEFVAL { 2 }
::= { wlcAuthEapolProfileEntry 14 }
wlcAuthEapolProfileKeyTxEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The EAPOL protocol optionally supports the transmission
of global key information from the Authenticator to the
Supplicant, following a successful authentication exchange,
in circumstances in which encryption is available between
the Supplicant and Authenticator systems (e.g., where
encryption is used on an 802.11 association between a
station and an access point). The use of this facility is
controlled by the KeyTransmissionEnabled parameter. A
value of TRUE allows key information to be transmitted
following authorization; a value of FALSE disables the
key transmission capability.
Default value is false.
"
DEFVAL { false }
::= { wlcAuthEapolProfileEntry 15 }
-- **********************************************************************
-- * wlcWTPGlobalProfileTable TABLE
-- **********************************************************************
wlcWTPGlobalProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcWTPGlobalProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table cotains WTP debug level settings
"
::= { wlc 9 }
wlcWTPGlobalProfileEntry OBJECT-TYPE
SYNTAX WlcWTPGlobalProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcWTPGlobalProfileIndex }
::= { wlcWTPGlobalProfileTable 1 }
WlcWTPGlobalProfileEntry ::=
SEQUENCE {
wlcWTPGlobalProfileIndex INTEGER,
wlcWTPGlobalProfileDebugType INTEGER,
wlcWTPGlobalProfileDebugLevel INTEGER,
wlcWTPGlobalProfileAdminStatus INTEGER
}
wlcWTPGlobalProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index of a global profile.
"
::= { wlcWTPGlobalProfileEntry 1 }
wlcWTPGlobalProfileDebugType OBJECT-TYPE
SYNTAX INTEGER {
common(1),
authentication(2),
access-point(3),
bridge(4),
client(5),
lowlevel(6),
all(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wireless LAN Controler degugging type. With type common(1) debugging messages
of authentication, access_point, bridge and client
handling will be shown. With type
authentication(2) only messages concerning the authentication
handling (mainly WPA) will be shown. With type access_point(3)
only messages concerning the access_point handling
will be shown. With type bridge(4) only messages concerning
the bridge handling will be shown. With type client(5) only
messages concerning the client (wlanIfType == client) will be
shown. With type lowlevel(6) messages concerning the 802.11 layer
and lowlevel driver handling will be shown. With type all(7) all
messages of all types will be shown. Default is common(1).
Additionally within all types messages concerning generally WLAN
handling will be shown.
"
DEFVAL { common }
::= { wlcWTPGlobalProfileEntry 3 }
wlcWTPGlobalProfileDebugLevel OBJECT-TYPE
SYNTAX INTEGER { quiet(1), normal(2), verbose(3), very-verbose(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WLC degugging verbosity level. With a higher value
more debugging information will be created.
Default is normal(2).
"
DEFVAL { normal }
::= { wlcWTPGlobalProfileEntry 4 }
wlcWTPGlobalProfileAdminStatus OBJECT-TYPE
SYNTAX INTEGER { unmanaged(1), managed(2), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WLC global AdminStatus. The AP could be used
unmanaged(1) and must therefore be configured directly
or managed(2) by a WLAN controller. Delete(32) deletes the
required profile.
Default is managed(1).
"
DEFVAL { managed }
::= { wlcWTPGlobalProfileEntry 5 }
-- **********************************************************************
-- * wlcLogHostTable TABLE
-- **********************************************************************
wlcLogHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcLogHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table combines WTP with the log host profile.
"
::= { wlc 10 }
wlcLogHostEntry OBJECT-TYPE
SYNTAX WlcLogHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcLogHostIndex }
::= { wlcLogHostTable 1 }
WlcLogHostEntry ::=
SEQUENCE {
wlcLogHostIndex INTEGER,
wlcLogHostAdminStatus INTEGER,
wlcLogHostProfIndex INTEGER
}
wlcLogHostIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The wlcLogHostIndex is the unique WTP index.
"
::= { wlcLogHostEntry 1 }
wlcLogHostAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delete the log host profile
from the requested WTP.
"
DEFVAL { enabled }
::= { wlcLogHostEntry 2 }
wlcLogHostProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique
log host profile index.
"
::= { wlcLogHostEntry 3 }
-- **********************************************************************
-- * wlcLogHostProfileTable TABLE
-- **********************************************************************
wlcLogHostProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcLogHostProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcLogHostProfileTable contains profiles
to list hosts which are to receive syslog messages.
This table also defines which types and levels of
messages to send.
"
::= { wlc 11 }
wlcLogHostProfileEntry OBJECT-TYPE
SYNTAX WlcLogHostProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcLogHostProfileIndex }
::= { wlcLogHostProfileTable 1 }
WlcLogHostProfileEntry ::=
SEQUENCE {
wlcLogHostProfileIndex INTEGER,
wlcLogHostProfileAddrType InetAddressType,
wlcLogHostProfileAddr IpAddress,
wlcLogHostProfileLevel INTEGER,
wlcLogHostProfileFacility INTEGER,
wlcLogHostProfileType INTEGER,
wlcLogHostProfileTimestamp INTEGER,
wlcLogHostProfileMethod INTEGER
}
wlcLogHostProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index of a loghost profile
"
::= { wlcLogHostProfileEntry 1 }
wlcLogHostProfileAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address type of the requested loghost.
could be:
-unknown(0): an unknown address type
-ipv4(1) : an IPv4 address
-ipv6(2) : an IPv6 address
-ipv4z(3) : a non-global IPv4 address including a zone
index
-ipv6z(4) : a non-global IPv6 address including a zone
index
-dns(16) : a DNS domain name
"
::= { wlcLogHostProfileEntry 2 }
wlcLogHostProfileAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address where syslog messages are sent. If the
facility is set to memory or console, this field is
not used.
"
::= { wlcLogHostProfileEntry 3 }
wlcLogHostProfileLevel OBJECT-TYPE
SYNTAX INTEGER {
emerg(1),
alert(2),
crit(3),
err(4),
warning(5),
notice(6),
info(7),
debug(8),
delete(32)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priorities lower than or equal to this level are sent to
loghost.
The delete priority is used to discard the whole entry.
"
DEFVAL { info }
::= { wlcLogHostProfileEntry 4 }
wlcLogHostProfileFacility OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The facility used for the syslog messages being generated.
"
DEFVAL { local0 }
::= { wlcLogHostProfileEntry 5 }
wlcLogHostProfileType OBJECT-TYPE
SYNTAX INTEGER {
system(1),
acct(2),
all(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subject of the messages that are to be generated. system
means all subjects except accounting, all means all subjects.
"
DEFVAL { all }
::= { wlcLogHostProfileEntry 6 }
wlcLogHostProfileTimestamp OBJECT-TYPE
SYNTAX INTEGER {
none(1),
time(2),
all(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the format of the timestamp.
none(1) = no timestamp,
time(2) = only time is printed,
all(3) = date and time is printed.
"
DEFVAL { all }
::= { wlcLogHostProfileEntry 7 }
wlcLogHostProfileMethod OBJECT-TYPE
SYNTAX INTEGER {
udp(1),
tcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides protocol for sending syslog messages:
udp(1) = udp
tcp(2) = tcp
"
DEFVAL { udp }
::= { wlcLogHostProfileEntry 8 }
-- **********************************************************************
-- * wlcScheduleTable TABLE
-- **********************************************************************
wlcScheduleTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table combines WTP with the schedule profile.
"
::= { wlc 12 }
wlcScheduleEntry OBJECT-TYPE
SYNTAX WlcScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcScheduleIndex }
::= { wlcScheduleTable 1 }
WlcScheduleEntry ::=
SEQUENCE {
wlcScheduleIndex INTEGER,
wlcScheduleAdminStatus INTEGER,
wlcScheduleProfIndex INTEGER
}
wlcScheduleIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique WTP index.
"
::= { wlcScheduleEntry 1 }
wlcScheduleAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delete the schedule profile
from the requested WTP.
"
DEFVAL { enabled }
::= { wlcScheduleEntry 2 }
wlcScheduleProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique
schedule profile index.
"
::= { wlcScheduleEntry 3 }
-- **********************************************************************
-- * wlcScheduleProfileTable TABLE
-- **********************************************************************
wlcScheduleProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcScheduleProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcScheduleProfileTable contains different schedule profiles.
"
::= { wlc 13 }
wlcScheduleProfileEntry OBJECT-TYPE
SYNTAX WlcScheduleProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcScheduleProfileIndex }
::= { wlcScheduleProfileTable 1 }
WlcScheduleProfileEntry ::=
SEQUENCE {
wlcScheduleProfileIndex INTEGER,
wlcScheduleProfileAdminStatus INTEGER,
wlcScheduleProfileDescr DisplayString,
wlcScheduleProfileAction INTEGER,
wlcScheduleProfileCondition INTEGER,
wlcScheduleProfileStart DisplayString,
wlcScheduleProfileEnd DisplayString,
wlcScheduleProfileParameters DisplayString
}
wlcScheduleProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique schedule profile index.
"
::= { wlcScheduleProfileEntry 1 }
wlcScheduleProfileAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delete the requested schedule profile.
"
DEFVAL { enabled }
::= { wlcScheduleProfileEntry 2 }
wlcScheduleProfileDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the description (name) of this entry.
Only for information.
"
::= { wlcScheduleProfileEntry 3 }
wlcScheduleProfileAction OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable isn't in use right now.
"
::= { wlcScheduleProfileEntry 4 }
wlcScheduleProfileCondition OBJECT-TYPE
SYNTAX INTEGER {
greater(1), equal(2), less(3), notequal(4), range(5),
daily(6),
sunday(7), monday(8), tuesday(9), wednesday(10), thursday(11),
friday(12), saturday(13),
mon-fri(14), mon-sat(15), sat-sun(16),
day1(17), day2(18), day3(19), day4(20), day5(21), day6(22),
day7(23), day8(24), day9(25), day10(26), day11(27), day12(28),
day13(29), day14(30), day15(31), day16(32), day17(33), day18(34),
day19(35), day20(36), day21(37), day22(38), day23(39), day24(40),
day25(41), day26(42), day27(43), day28(44), day29(45), day30(46),
day31(47)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the condition when the event is active
Time events (active at the time 'Start' until 'End'):
daily : the time event is daily active at given time
monday..sunday: the time event is weekly active
day1..day31 : the time event is monthly active
mon_fri : from monday to friday
mon_sat : from monday to saturday
sat_sun : weekend (saturday and sunday)
Value events:
greater : value of 'Var' must be greater than 'Start'
equal : value of 'Var' must be equal to 'Start'
less : value of 'Var' must be less than 'Start'
notequal : value of 'Var' must be not equal to 'Start'
range : value of 'Var' must be between 'Start-End'
"
DEFVAL { daily }
::= { wlcScheduleProfileEntry 5 }
wlcScheduleProfileStart OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the start value.
In case of a time event it must be a time in format 'hh:mm'.
In case of a value event it must be a valid value for the
specified 'VarName', to specify the compare value or the
lower value of the range.
For time entries e.g. 12:00
For value entries e.g. 20000
"
::= { wlcScheduleProfileEntry 6 }
wlcScheduleProfileEnd OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the end value (time or value range).
In case of a time event it must be a time in format 'hh:mm'.
If this is not given, the event is active only at the
time 'Start', and set back to inactive at once (one-time
event).
In case of a value event it must be a valid value for the
specified 'VarName', to specify the upper value of the range.
"
::= { wlcScheduleProfileEntry 7 }
wlcScheduleProfileParameters OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable isn't in use right now.
"
::= { wlcScheduleProfileEntry 8 }
-- **********************************************************************
-- * wlcLocalServicesTable TABLE
-- **********************************************************************
wlcLocalServicesTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcLocalServicesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table combines WTP with the local services profile.
"
::= { wlc 14 }
wlcLocalServicesEntry OBJECT-TYPE
SYNTAX WlcLocalServicesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcLocalServicesIndex }
::= { wlcLocalServicesTable 1 }
WlcLocalServicesEntry ::=
SEQUENCE {
wlcLocalServicesIndex INTEGER,
wlcLocalServicesAdminStatus INTEGER,
wlcLocalServicesProfIndex INTEGER
}
wlcLocalServicesIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique WTP index.
"
::= { wlcLocalServicesEntry 1 }
wlcLocalServicesAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delete the local services profile
from the requested WTP
"
DEFVAL { enabled }
::= { wlcLocalServicesEntry 2 }
wlcLocalServicesProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique RADIUS
service profile index.
"
::= { wlcLocalServicesEntry 3 }
-- **********************************************************************
-- * wlcLocalServicesProfileTable TABLE
-- **********************************************************************
wlcLocalServicesProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcLocalServicesProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration profiles for
local services (e.g. httpd, sshd) on the WTP.
"
::= { wlc 15 }
wlcLocalServicesProfileEntry OBJECT-TYPE
SYNTAX WlcLocalServicesProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcLocalServicesProfileIndex }
::= { wlcLocalServicesProfileTable 1 }
WlcLocalServicesProfileEntry ::=
SEQUENCE {
wlcLocalServicesProfileIndex INTEGER,
wlcLocalServicesProfileAdminStatus INTEGER,
wlcLocalServicesProfileName DisplayString,
wlcLocalServicesProfilePort INTEGER,
wlcLocalServicesProfilePortRange INTEGER,
wlcLocalServicesProfileProtocol INTEGER
}
wlcLocalServicesProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique local services profile index
"
::= { wlcLocalServicesProfileEntry 1 }
wlcLocalServicesProfileAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of this entry.
The entry can be enabled(1), disabled(2) or set to delete(32)
and is therefore deleted.
Default is enabled(1).
"
DEFVAL { enabled }
::= { wlcLocalServicesProfileEntry 2 }
wlcLocalServicesProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the ServicesProfile entry.
"
::= { wlcLocalServicesProfileEntry 3 }
wlcLocalServicesProfilePort OBJECT-TYPE
SYNTAX INTEGER ( -1..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number.
"
::= { wlcLocalServicesProfileEntry 4 }
wlcLocalServicesProfilePortRange OBJECT-TYPE
SYNTAX INTEGER ( 1..65536 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port range.
"
::= { wlcLocalServicesProfileEntry 5 }
wlcLocalServicesProfileProtocol OBJECT-TYPE
SYNTAX INTEGER {
icmp(1),
igmp(2),
ip(4),
tcp(6),
udp(17),
udptcp(253),
any(254),
dont-verify(256)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol type of this entry.
"
DEFVAL { udptcp }
::= { wlcLocalServicesProfileEntry 6 }
-- **********************************************************************
-- * wlcWlanIfTable TABLE
-- **********************************************************************
wlcWlanIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcWlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcWlanIfTable contains all WLAN interfaces of each WTP
with their configured profiles.
"
::= { wlc 16 }
wlcWlanIfEntry OBJECT-TYPE
SYNTAX WlcWlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcWlanIfIndex }
::= { wlcWlanIfTable 1 }
WlcWlanIfEntry ::=
SEQUENCE {
wlcWlanIfIndex INTEGER,
wlcWlanIfWTPIndex INTEGER,
wlcWlanIfWTPMacAddress MacAddress,
wlcWlanIfProfIndex INTEGER,
wlcWlanIfType INTEGER,
wlcWlanIfChannel INTEGER,
wlcWlanIfAutoSelectedChannel INTEGER,
wlcWlanIfSecondaryChannel INTEGER,
wlcWlanIfAutoSecondaryChannel INTEGER,
wlcWlanIfTxPower INTEGER,
wlcWlanIfClientScanState INTEGER,
wlcWlanIfClientIndex INTEGER,
wlcWlanIfHWIndex INTEGER,
wlcWlanIfRadioIndexWTP INTEGER
}
wlcWlanIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index which is incremented for each new WLAN interface entry.
"
::= { wlcWlanIfEntry 1 }
wlcWlanIfWTPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The wlcWlanIfWTPIndex is the uniqe WTP index
see wlcWTPIndex.
"
::= { wlcWlanIfEntry 2 }
wlcWlanIfWTPMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlcWlanIfWTPMacAddress is the first ethernet
MAC address of the WTP.
"
::= { wlcWlanIfEntry 3 }
wlcWlanIfProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The wlcWlanIfProfIndex is the configured WLAN interface profile.
See wlcWlanIfProfileIndex.
"
::= { wlcWlanIfEntry 4 }
wlcWlanIfType OBJECT-TYPE
SYNTAX INTEGER { off(1),
access-point(2),
client(3),
default(7),
delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current WLAN physical interface type for the WTP
off(1) interface disabled
access-point(2) access point
client(3) client mode
default(4) the type of the corresponding wlcWlanIfProfile
delete(32) delete
"
DEFVAL { default }
::= { wlcWlanIfEntry 5 }
wlcWlanIfChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The physical channel.
"
::= { wlcWlanIfEntry 6 }
wlcWlanIfAutoSelectedChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auto selected channel.
"
::= { wlcWlanIfEntry 7 }
wlcWlanIfSecondaryChannel OBJECT-TYPE
SYNTAX INTEGER { below(1), above(2), default(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The wlcWlanIfSecondaryChannel describes
if the secondary channel (40Mhz bandwidth) is below(1) or above(2)
of the current selected channel.
"
DEFVAL { below }
::= { wlcWlanIfEntry 8 }
wlcWlanIfAutoSecondaryChannel OBJECT-TYPE
SYNTAX INTEGER { below(1), above(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The wlcWlanIfAutoSecondaryChannel describes
if the secondary channel (40Mhz bandwidth) is below(1) or above(2)
of the auto selected channel.
"
DEFVAL { below }
::= { wlcWlanIfEntry 9 }
wlcWlanIfTxPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitter output power in dBm.
"
::= { wlcWlanIfEntry 10 }
wlcWlanIfClientScanState OBJECT-TYPE
SYNTAX INTEGER { idle(1), scanning(2), update(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute holds the foreground scanning status.
Writing scanning(2) in idle state triggers a new
foreground scan cycle. All entries for this client
interface in the wlcScanResultsTable are removed.
When the WLAN client has finished scanning, the attribute
changes back to idle(1), wlcScanResultsTable is
updated automatically.
To update wlcScanResultsTable without triggering a new
foreground scan, you can write update(3) to this attribute.
This causes wlcScanResultsTable to be updated immedieately,
reflecting any changes detected by automatic backgound scanning.
After wlcScanResultsTable is updated, the value switches back
to state idle(1).
Any attempt to write different values, or to write values in a
state different from idle(1), is ignored.
"
DEFVAL { idle }
::= { wlcWlanIfEntry 11 }
wlcWlanIfClientIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index pointer to the wlcClientProfileTable.
"
::= { wlcWlanIfEntry 12 }
wlcWlanIfHWIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index pointer to the wlcWlanHWTable.
"
::= { wlcWlanIfEntry 13 }
wlcWlanIfRadioIndexWTP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WLAN interface index on the WTP.
"
::= { wlcWlanIfEntry 14 }
-- **********************************************************************
-- * wlcWlanIfProfileTable TABLE
-- **********************************************************************
wlcWlanIfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcWlanIfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains WLAN interface profiles.
"
::= { wlc 17 }
wlcWlanIfProfileEntry OBJECT-TYPE
SYNTAX WlcWlanIfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcWlanIfProfileIndex }
::= { wlcWlanIfProfileTable 1 }
WlcWlanIfProfileEntry ::=
SEQUENCE {
wlcWlanIfProfileIndex INTEGER,
wlcWlanIfProfileName DisplayString,
wlcWlanIfProfileType INTEGER,
wlcWlanIfProfileMode INTEGER,
wlcWlanIfProfileSpeed INTEGER,
wlcWlanIfProfileSkipChannels24GHz BITS,
wlcWlanIfProfileSkipChannels5GHz BITS,
wlcWlanIfProfileRtsThreshold INTEGER,
wlcWlanIfProfileFragmentationThreshold INTEGER,
wlcWlanIfProfileBurst INTEGER,
wlcWlanIfProfileCountry DisplayString,
wlcWlanIfProfileBand INTEGER,
wlcWlanIfProfileAckWindow INTEGER,
wlcWlanIfProfileBeaconPeriod INTEGER,
wlcWlanIfProfileDTIMPeriod INTEGER,
wlcWlanIfProfileSpatialStreams INTEGER,
wlcWlanIfProfileGreenfield TruthValue,
wlcWlanIfProfileShortGI TruthValue,
wlcWlanIfProfileRxSTBC TruthValue,
wlcWlanIfProfileTxSTBC TruthValue,
wlcWlanIfProfileFortyMHzOperation TruthValue,
wlcWlanIfProfileShortRetry INTEGER,
wlcWlanIfProfileLongRetry INTEGER,
wlcWlanIfProfileBgScanning INTEGER,
wlcWlanIfProfileAirtimeFairness INTEGER
}
wlcWlanIfProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index of a WIFI interface profile.
"
::= { wlcWlanIfProfileEntry 1 }
wlcWlanIfProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the requested profile.
"
::= { wlcWlanIfProfileEntry 2 }
wlcWlanIfProfileType OBJECT-TYPE
SYNTAX INTEGER { off(1),
access-point(2),
client(3),
delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WLAN physical interface type:
off(1) interface disabled
access-point(2) access point
client(3) client mode
delete(32) delete
"
DEFVAL { off }
::= { wlcWlanIfProfileEntry 3 }
wlcWlanIfProfileMode OBJECT-TYPE
SYNTAX INTEGER {
m802-11b(1),
m802-11g(2),
m802-11mixed(3),
m802-11mixed-long(4),
m802-11mixed-short(5),
m802-11a(6),
m802-11bgn(7),
m802-11gn(8),
m802-11n(10),
m802-11an(11),
m802-11abg(12),
m802-11abgn(13),
m802-11agn(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mixed and compatibility modes between various 802.11 substandards.
"
DEFVAL { m802-11bgn }
::= { wlcWlanIfProfileEntry 4 }
wlcWlanIfProfileSpeed OBJECT-TYPE
SYNTAX INTEGER {
s1mbit(1),
s2mbit(2),
s5mbit(3),
s6mbit(4),
s9mbit(5),
s11mbit(6),
s12mbit(7),
s18mbit(8),
s24mbit(9),
s36mbit(10),
s48mbit(11),
s54mbit(12),
sMCS0-HT(13),
sMCS1-HT(14),
sMCS2-HT(15),
sMCS3-HT(16),
sMCS4-HT(17),
sMCS5-HT(18),
sMCS6-HT(19),
sMCS7-HT(20),
sMCS8-HT(21),
sMCS9-HT(22),
sMCS10-HT(23),
sMCS11-HT(24),
sMCS12-HT(25),
sMCS13-HT(26),
sMCS14-HT(27),
sMCS15-HT(28),
auto(31),
sMCS16-HT(32),
sMCS17-HT(33),
sMCS18-HT(34),
sMCS19-HT(35),
sMCS20-HT(36),
sMCS21-HT(37),
sMCS22-HT(38),
sMCS23-HT(39)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value defines the bitrate or the coding scheme to use for data frames.
Default value auto(31) enables automatic rate adaption.
"
DEFVAL { auto }
::= { wlcWlanIfProfileEntry 5 }
wlcWlanIfProfileSkipChannels24GHz OBJECT-TYPE
SYNTAX BITS {
channel-1(0),
channel-2(1),
channel-3(2),
channel-4(3),
channel-5(4),
channel-6(5),
channel-7(6),
channel-8(7),
channel-9(8),
channel-10(9),
channel-11(10),
channel-12(11),
channel-13(12),
channel-14(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a bit is set the according channel will be skipped from
the channel scan list (channel 1-14 for 2.4 GHz).
Default is to scan all channels (i.e. no bit is set).
"
DEFVAL { {} }
::= { wlcWlanIfProfileEntry 6 }
wlcWlanIfProfileSkipChannels5GHz OBJECT-TYPE
SYNTAX BITS {
channel-36(0),
channel-40(1),
channel-44(2),
channel-48(3),
channel-52(4),
channel-56(5),
channel-60(6),
channel-64(7),
channel-100(8),
channel-104(9),
channel-108(10),
channel-112(11),
channel-116(12),
channel-120(13),
channel-124(14),
channel-128(15),
channel-132(16),
channel-136(17),
channel-140(18),
channel-149(19),
channel-153(20),
channel-157(21),
channel-161(23),
channel-165(24),
channel-169(25),
channel-173(26)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a bit is set the accordingly channel will be skipped from
the channel scan list (channel 36-173 for 5 GHz).
Default is to scan all channels (i.e. no bit is set).
"
DEFVAL { {} }
::= { wlcWlanIfProfileEntry 7 }
wlcWlanIfProfileRtsThreshold OBJECT-TYPE
SYNTAX INTEGER (1..2347)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shall indicate the number of octets in an
MPDU, below which an RTS/CTS handshake shall not be
performed, except as RTS/CTS is used as a cross modulation
protection mechanism. An RTS/CTS
handshake shall be performed at the beginning of any frame
exchange sequence where the MPDU is of type Data or
Management, the MPDU has an individual address in the
Address1 field, and the length of the MPDU is greater than
this threshold. Setting this attribute to be larger than the
maximum MSDU size shall have the effect of turning off the
RTS/CTS handshake for frames of Data or Management type
transmitted by this STA. Setting this attribute to one
shall have the effect of turning on the RTS/CTS handshake
for all frames of Data or Management type transmitted by
this STA. The default value of this attribute shall be
2347.
"
DEFVAL { 2347 }
::= { wlcWlanIfProfileEntry 8 }
wlcWlanIfProfileFragmentationThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shall specify the current maximum size, in
octets, of the PSDU that may be delivered to the PHY.
This maximum size does not apply in the case of A-MPDU. An
MSDU, A-MSDU or MMPDU shall be broken into fragments if its
size exceeds the value of this attribute after adding MAC
headers and trailers. An MSDU, A-MSDU or MMPDU shall be
fragmented when the resulting frame has an individual address
in the Address1 field, and the length of the frame is larger
than this threshold. The default value for this attribute
shall be the lesser of 8000 or the aMPDUMaxLength or the
aPSDUMaxLength of the attached PHY and shall never exceed the
lesser of 8000 or the aMPDUMaxLength or the
aPSDUMaxLength of the attached PHY. The value of this
attribute shall never be less than 256.
Default is 2346.
"
DEFVAL { 2346 }
::= { wlcWlanIfProfileEntry 9 }
wlcWlanIfProfileBurst OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sending wireless frames without backoff time.
"
DEFVAL { disabled }
::= { wlcWlanIfProfileEntry 10 }
wlcWlanIfProfileCountry OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute identifies the country in which the station is operating.
The first two octets of this string are the two character country code as
described in document ISO/IEC 3166-1. The third octet shall be one of the
following:
1. an ASCII space character, if the regulations under which the
station is operating encompass all environments in the country,
2. an ASCII 'O' character, if the regulations under which the
station is operating are for an Outdoor environment only, or
3. an ASCII 'I' character, if the regulations under which the
station is operating are for an Indoor environment only.
"
DEFVAL { "DE " }
::= { wlcWlanIfProfileEntry 11 }
wlcWlanIfProfileBand OBJECT-TYPE
SYNTAX INTEGER { b24-GHz(1), b5-GHz(2), b58-GHz(3), b24-5-GHz(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frequency band. 'b24-GHz' -> 2.4 GHz band, 'b5-GHz' -> 5 GHz band,
'b58-GHz' -> 5.8 GHz band, 'b24-5-GHz' -> 2.4 GHz and 5 GHz band.
"
DEFVAL { b24-GHz }
::= { wlcWlanIfProfileEntry 12 }
wlcWlanIfProfileAckWindow OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Additional 802.11 ACK timeout in microseconds.
This must be set to non-zero value for radio distances
larger than about 700m.
Recommended setting is about 10 microseconds per kilometer.
"
DEFVAL { 0 }
::= { wlcWlanIfProfileEntry 13 }
wlcWlanIfProfileBeaconPeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute contains the number of TU that this
BSS uses for scheduling Beacon transmissions.
"
DEFVAL { 100 }
::= { wlcWlanIfProfileEntry 14 }
wlcWlanIfProfileDTIMPeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of DTIM intervals between
the start of CFPs for this BSS.
"
DEFVAL { 2 }
::= { wlcWlanIfProfileEntry 15 }
wlcWlanIfProfileSpatialStreams OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute indicates the maximum number of spatial
streams enabled. The default value of this attribute is 3.
"
DEFVAL { 3 }
::= { wlcWlanIfProfileEntry 16 }
wlcWlanIfProfileGreenfield OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the HT Greenfield
option is enabled. The default value of this attribute is FALSE.
"
DEFVAL { false }
::= { wlcWlanIfProfileEntry 17 }
wlcWlanIfProfileShortGI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the Short Guard
option is enabled for 40 MHz operation. The default value of this attribute
is FALSE.
"
DEFVAL { false }
::= { wlcWlanIfProfileEntry 18 }
wlcWlanIfProfileRxSTBC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the entity's
capability of receiving frames that are sent using the Space-Time Block Code
(STBC) is enabled. The default value of this attribute is FALSE.
"
DEFVAL { false }
::= { wlcWlanIfProfileEntry 19 }
wlcWlanIfProfileTxSTBC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the entity's
capability of transmitting frames using Space-Time Block Code (STBC) option
is enabled. The default value of this attribute is FALSE.
"
DEFVAL { false }
::= { wlcWlanIfProfileEntry 20 }
wlcWlanIfProfileFortyMHzOperation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the 40 MHz
Operation is enabled. The default value of this attribute is FALSE.
"
DEFVAL { false }
::= { wlcWlanIfProfileEntry 21 }
wlcWlanIfProfileShortRetry OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shall indicate the maximum number of
transmission attempts of a frame, the length of which is less
than or equal to dot11RTSThreshold, that shall be made before a
failure condition is indicated. The default value of this
attribute shall be 7.
"
DEFVAL { 7 }
::= { wlcWlanIfProfileEntry 22 }
wlcWlanIfProfileLongRetry OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shall indicate the maximum number of
transmission attempts of a frame, the length of which is
greater than dot11RTSThreshold, that shall be made before a
failure condition is indicated. The default value of this
attribute shall be 4.
"
DEFVAL { 4 }
::= { wlcWlanIfProfileEntry 23 }
wlcWlanIfProfileBgScanning OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable background-scanning.
"
DEFVAL { disabled }
::= { wlcWlanIfProfileEntry 24 }
wlcWlanIfProfileAirtimeFairness OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If AirtimeFairness is enabled(1), background or best-effort traffic
sent from AP to STA is fairly scheduled among all stations
associated to this radio profile, in respect of airtime usage.
The default value of this attribute is enabled(1)."
DEFVAL { disabled }
::= { wlcWlanIfProfileEntry 25 }
-- **********************************************************************
-- * wlcClientProfileTable TABLE
-- **********************************************************************
wlcClientProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcClientProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains WTP radio client profiles.
"
::= { wlc 18 }
wlcClientProfileEntry OBJECT-TYPE
SYNTAX WlcClientProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcClientProfileIndex }
::= { wlcClientProfileTable 1 }
WlcClientProfileEntry ::=
SEQUENCE {
wlcClientProfileIndex INTEGER,
wlcClientProfileScanPeriodAMin INTEGER,
wlcClientProfileScanPeriodAMax INTEGER,
wlcClientProfileScanPeriodMin INTEGER,
wlcClientProfileScanPeriodMax INTEGER,
wlcClientProfileAdminStatus INTEGER
}
wlcClientProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique Client profile index.
"
::= { wlcClientProfileEntry 1 }
wlcClientProfileScanPeriodAMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum time in ms to spend on a frequency when active
scanning.
Default is 10ms.
"
DEFVAL { 10 }
::= { wlcClientProfileEntry 2 }
wlcClientProfileScanPeriodAMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum time in ms to spend on a frequency when active
scanning.
Default is 40ms.
"
DEFVAL { 40 }
::= { wlcClientProfileEntry 3 }
wlcClientProfileScanPeriodMin OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum time in ms to spend on a frequency when passive
scanning.
Default is 20ms.
"
DEFVAL { 20 }
::= { wlcClientProfileEntry 4 }
wlcClientProfileScanPeriodMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum time in ms to spend on a frequency when passive
scanning.
Default is 120ms.
"
DEFVAL { 120 }
::= { wlcClientProfileEntry 5 }
wlcClientProfileAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delte the requested WLAN client profile.
"
DEFVAL { enabled }
::= { wlcClientProfileEntry 7 }
-- **********************************************************************
-- * wlcVSSTable TABLE
-- **********************************************************************
wlcVSSTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcVSSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table combines WTP with the VSS profile.
"
::= { wlc 19 }
wlcVSSEntry OBJECT-TYPE
SYNTAX WlcVSSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcVSSIndex }
::= { wlcVSSTable 1 }
WlcVSSEntry ::=
SEQUENCE {
wlcVSSIndex INTEGER,
wlcVSSwlanIfIndex INTEGER,
wlcVSSProfIndex INTEGER,
wlcVSSAdminStatus INTEGER
}
wlcVSSIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains a unique index.
"
::= { wlcVSSEntry 1 }
wlcVSSwlanIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is the WLAN interface of the requested
WTP WLAN interface.
"
::= { wlcVSSEntry 2 }
wlcVSSProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique
VSS profile index.
"
::= { wlcVSSEntry 3 }
wlcVSSAdminStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2), default(3), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or delete the VSS profile
from the requested WTP.
"
DEFVAL { default }
::= { wlcVSSEntry 4 }
-- **********************************************************************
-- * wlcVSSProfileTable TABLE
-- **********************************************************************
wlcVSSProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcVSSProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains different
VSS setting profiles.
"
::= { wlc 20 }
wlcVSSProfileEntry OBJECT-TYPE
SYNTAX WlcVSSProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcVSSProfileIndex }
::= { wlcVSSProfileTable 1 }
WlcVSSProfileEntry ::=
SEQUENCE {
wlcVSSProfileIndex INTEGER,
wlcVSSProfileId DisplayString,
wlcVSSProfileName DisplayString,
wlcVSSProfileAdminStatus INTEGER,
wlcVSSProfileSecurity INTEGER,
wlcVSSProfileDefaultKey INTEGER,
wlcVSSProfileKey1 OCTET STRING,
wlcVSSProfileKey2 OCTET STRING,
wlcVSSProfileKey3 OCTET STRING,
wlcVSSProfileKey4 OCTET STRING,
wlcVSSProfileTotal INTEGER,
wlcVSSProfileSoftTotal INTEGER,
wlcVSSProfileMAC TruthValue,
wlcVSSProfileLocal TruthValue,
wlcVSSProfileHidden TruthValue,
wlcVSSProfileWPAUnicastCipher BITS,
wlcVSSProfileRSNUnicastCipher BITS,
wlcVSSProfileWpaMixedMode INTEGER,
wlcVSSProfileRsnPreauthentication TruthValue,
wlcVSSProfileWMM TruthValue,
wlcVSSProfileARPProcessing TruthValue,
wlcVSSProfileVlanId INTEGER,
wlcVSSProfileBandSteeringPreference INTEGER,
wlcVSSProfileBlacklist INTEGER,
wlcVSSProfileUAPSD INTEGER,
wlcVSSProfileStaTxShaping INTEGER,
wlcVSSProfileStaRxShaping INTEGER
}
wlcVSSProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique VSS profile index.
"
::= { wlcVSSProfileEntry 1 }
wlcVSSProfileId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute reflects the Service Set ID used
in the DesiredSSID parameter of the most recent
MLME scan request.
"
DEFVAL { "default" }
::= { wlcVSSProfileEntry 2 }
wlcVSSProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VSS profile name.
"
DEFVAL { "" }
::= { wlcVSSProfileEntry 3 }
wlcVSSProfileAdminStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable, disable or delete the requested VSS profile.
"
DEFVAL { enabled }
::= { wlcVSSProfileEntry 4 }
wlcVSSProfileSecurity OBJECT-TYPE
SYNTAX INTEGER { none(1), wep40(2), wep104(3), wpa-psk(4),
wpa(5), wpa2(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Security Option which will be used.
wep40 and wep104:= WEP-Authentication
wpa-psk := WPA-Authentication with PSK
wpa := WPA-Authentication with radius (802.1X)
wpa2 := OBSOLETE and not used anymore!
"
DEFVAL { none }
::= { wlcVSSProfileEntry 5 }
wlcVSSProfileDefaultKey OBJECT-TYPE
SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default key for WEP encryption.
"
DEFVAL { key1 }
::= { wlcVSSProfileEntry 6 }
wlcVSSProfileKey1 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key string for WEP key no. 1.
Also used for WPA passphrase.
"
::= { wlcVSSProfileEntry 7 }
wlcVSSProfileKey2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key string for WEP key no. 2.
"
::= { wlcVSSProfileEntry 8 }
wlcVSSProfileKey3 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key string for WEP key no. 3.
"
::= { wlcVSSProfileEntry 9 }
wlcVSSProfileKey4 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key string for WEP key no. 4.
"
::= { wlcVSSProfileEntry 10 }
wlcVSSProfileTotal OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of allowed clients of the requested VSS.
"
DEFVAL { 32 }
::= { wlcVSSProfileEntry 11 }
wlcVSSProfileMAC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC Media Access Control via MAC Address.
"
DEFVAL { false }
::= { wlcVSSProfileEntry 12 }
wlcVSSProfileLocal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Routing between connected Clients.
"
DEFVAL { false }
::= { wlcVSSProfileEntry 13 }
wlcVSSProfileHidden OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define whether SSID is hidden (true) or not (false).
Default value is false.
"
DEFVAL { false }
::= { wlcVSSProfileEntry 14 }
wlcVSSProfileWPAUnicastCipher OBJECT-TYPE
SYNTAX BITS {
tkip(1),
aes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of unicast ciphers used for WPA.
"
DEFVAL { {tkip} }
::= { wlcVSSProfileEntry 15 }
wlcVSSProfileRSNUnicastCipher OBJECT-TYPE
SYNTAX BITS {
tkip(1),
aes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of unicast ciphers used for RSN.
"
DEFVAL { {aes} }
::= { wlcVSSProfileEntry 16 }
wlcVSSProfileWpaMixedMode OBJECT-TYPE
SYNTAX INTEGER { wpa(1), wpa2(2), wpaandwpa2(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows mixed operation of WPA and WPA2 by value wpaandwpa2(3)
(default value).
For tightened security, value wpa2(2) can be selected.
The value wpa(1) is available for some older clients with drivers
that are unable to deal with WPA2 information elements.
"
DEFVAL { wpaandwpa2 }
::= { wlcVSSProfileEntry 17 }
wlcVSSProfileRsnPreauthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to TRUE, this shall indicate that RSNA
preauthentication is enabled on this entity.
This object requires that dot11RSNAEnabled also be set to TRUE.
"
DEFVAL { true }
::= { wlcVSSProfileEntry 18 }
wlcVSSProfileWMM OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether WMM (Wi-Fi Multimedia)
is active for this service set.
Depending on the WLAN hardware and driver, WMM might
only be allowed for one service set, i.e. enabling WMM for one
service set disables WMM for all other service sets.
"
DEFVAL { true }
::= { wlcVSSProfileEntry 19 }
wlcVSSProfileARPProcessing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether ARP processing
is active for this service set or not.
ARP processing is a feature to reduce the number
of ARP broadcast packets. If the AP finds the
requested IP address in the node table it exchanges
the broadcast MAC address by the unicast MAC address
of the client.
Default is false.
"
DEFVAL { false }
::= { wlcVSSProfileEntry 20 }
wlcVSSProfileVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN-Tag-Id used for the virtual interface.
"
::= { wlcVSSProfileEntry 21 }
wlcVSSProfileSoftTotal OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If wlcVSSProfileSoftTotal STAs are connected to this VSS,
subsequent association attempts will be rejected with BUSY.
If a STA still tries to associate within 30sec, the association
request will be accepted."
DEFVAL { 28 }
::= { wlcVSSProfileEntry 22 }
wlcVSSProfileBandSteeringPreference OBJECT-TYPE
SYNTAX INTEGER { none(1), bs-24GHz(2), bs-5GHz(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the preferred band for Band Steering.
none : no preference (default)
b24-GHz: prefer 2,4 GHz
b5-GHz : prefer 5 GHz"
DEFVAL { none }
::= { wlcVSSProfileEntry 23 }
wlcVSSProfileBlacklist OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable blacklisting via MAC addresses."
DEFVAL { disable }
::= { wlcVSSProfileEntry 24 }
wlcVSSProfileUAPSD OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable UAPSD"
DEFVAL { enable }
::= { wlcVSSProfileEntry 25 }
wlcVSSProfileStaRxShaping OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"STA to AP bandwidth limitation per associated station. The value
is given in bits per seconds, -1 is unlimited (default)"
DEFVAL { -1 }
::= { wlcVSSProfileEntry 26 }
wlcVSSProfileStaTxShaping OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP to STA bandwidth limitation per associated station. The value
is given in bits per seconds, -1 is unlimited (default)"
DEFVAL { -1 }
::= { wlcVSSProfileEntry 27 }
-- **********************************************************************
-- * wlcACLProfileTable TABLE
-- **********************************************************************
wlcACLProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcACLProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains different ACL profiles.
The WLAN Access List is based on MAC Addresses.
"
::= { wlc 21 }
wlcACLProfileEntry OBJECT-TYPE
SYNTAX WlcACLProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcACLProfileIndex, wlcACLProfileAddress }
::= { wlcACLProfileTable 1 }
WlcACLProfileEntry ::=
SEQUENCE {
wlcACLProfileIndex INTEGER,
wlcACLProfileAddress MacAddress,
wlcACLProfileAdminStatus INTEGER
}
wlcACLProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The variable is the unique profile index.
"
::= { wlcACLProfileEntry 1 }
wlcACLProfileAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC Address for the accepted client.
"
::= { wlcACLProfileEntry 2 }
wlcACLProfileAdminStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2), delete(32) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable, disable or delete the requested
ACL profile entry.
"
DEFVAL { enabled }
::= { wlcACLProfileEntry 3 }
-- **********************************************************************
-- * wlcACStatTable TABLE
-- **********************************************************************
wlcACStat OBJECT IDENTIFIER
::= { wlc 22 }
wlcACStatNoWTPManaged OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of managed WTPs.
"
::= { wlcACStat 1 }
wlcACStatNoWTPDiscovered OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discovered WTPs.
"
::= { wlcACStat 2 }
wlcACStatTxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted packets.
"
::= { wlcACStat 3 }
wlcACStatTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted bytes.
"
::= { wlcACStat 4 }
wlcACStatRxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received packets.
"
::= { wlcACStat 5 }
wlcACStatRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received bytes.
"
::= { wlcACStat 6 }
wlcACStatRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retransmissions.
"
::= { wlcACStat 7 }
-- **********************************************************************
-- * wlcWTPInfoTable TABLE
-- **********************************************************************
wlcWTPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcWTPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains different information of each WTP.
"
::= { wlc 23 }
wlcWTPInfoEntry OBJECT-TYPE
SYNTAX WlcWTPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcWTPInfoIndex }
::= { wlcWTPInfoTable 1 }
WlcWTPInfoEntry ::=
SEQUENCE {
wlcWTPInfoIndex INTEGER,
wlcWTPInfoWTPIndex INTEGER,
wlcWTPInfoMacAddress MacAddress,
wlcWTPInfoState INTEGER,
wlcWTPInfoDevice DisplayString,
wlcWTPInfoSerialNo DisplayString,
wlcWTPInfoSwVer DisplayString,
wlcWTPInfoInetAddressType InetAddressType,
wlcWTPInfoInetAddress IpAddress,
wlcWTPInfoNoRadios INTEGER,
wlcWTPInfoConnectTime TimeTicks,
wlcWTPInfoRxPackets Counter32,
wlcWTPInfoRxBytes Counter32,
wlcWTPInfoTxPackets Counter32,
wlcWTPInfoTxBytes Counter32,
wlcWTPInfoRetransmissions Counter32,
wlcWTPInfoLastSeen Date
}
wlcWTPInfoIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique WTP information index.
"
::= { wlcWTPInfoEntry 1 }
wlcWTPInfoWTPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique WTP index.
"
::= { wlcWTPInfoEntry 2 }
wlcWTPInfoMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first ethernet MAC address of the WTPs.
"
::= { wlcWTPInfoEntry 3 }
wlcWTPInfoState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
discovery(2),
authorize(3),
join(4),
configure(5),
mib-configure(6),
data-check(7),
run(8),
reset(9),
lostac(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reflects the current (CAPWAP) state of the WTP.
idle(1) - WTP is idle (isn't seen by AC)
discovery(2) - WTP is discovered by AC
authorize(3) - WTP is waiting to be authorized by AC
join(4) - WTP send join request to AC
configure(5) - AC replied to join and send configure request
mib-configure(6) - WTP retrieves configuration from AC
data-check(7) - WTP is (re)configuring itself
run(8) - WTP has finished configuration and is now managed
reset(9) - WTP will be resetted (reboot).
lostac(10) - The WTP lost the connection to its AC (see: wlcACLostACLifeTime)
Default is idle(1).
"
DEFVAL { idle }
::= { wlcWTPInfoEntry 4 }
wlcWTPInfoDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The official WTP device name.
"
::= { wlcWTPInfoEntry 5 }
wlcWTPInfoSerialNo OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique serial number of the WTP
"
::= { wlcWTPInfoEntry 6 }
wlcWTPInfoSwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current software version of the WTP
"
::= { wlcWTPInfoEntry 7 }
wlcWTPInfoInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of the WTP.
It is one of:
-unknown(0): an unknown address type
-ipv4(1) : an IPv4 address
-ipv6(2) : an IPv6 address
-ipv4z(3) : a non-global IPv4 address including a zone
index
-ipv6z(4) : a non-global IPv6 address including a zone
index
-dns(16) : a DNS domain name
"
::= { wlcWTPInfoEntry 8 }
wlcWTPInfoInetAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the requested WTP.
"
::= { wlcWTPInfoEntry 9 }
wlcWTPInfoNoRadios OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of radios that the device has.
"
::= { wlcWTPInfoEntry 10 }
wlcWTPInfoConnectTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute records the time since last state change.
"
::= { wlcWTPInfoEntry 11 }
wlcWTPInfoTxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmitted packets of the requested WTP.
"
::= { wlcWTPInfoEntry 12 }
wlcWTPInfoTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted bytes of the requested WTP.
"
::= { wlcWTPInfoEntry 13 }
wlcWTPInfoRxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received packets of the requested WTP.
"
::= { wlcWTPInfoEntry 14 }
wlcWTPInfoRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received bytes of the requested WTP.
"
::= { wlcWTPInfoEntry 15 }
wlcWTPInfoRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retransmissions of the requested WTP.
"
::= { wlcWTPInfoEntry 16 }
wlcWTPInfoLastSeen OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On Ac this is the timestamp of the last receved CAPWAP UDP
packet from that WTP.
On WTP this is the timestamp of the last received CAPWAP UDP
packet from AC.
"
::= { wlcWTPInfoEntry 17 }
-- **********************************************************************
-- * wlcWlanHWTable TABLE
-- **********************************************************************
wlcWlanHWTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcWlanHWEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all features of supported wireless cards.
"
::= { wlc 24 }
wlcWlanHWEntry OBJECT-TYPE
SYNTAX WlcWlanHWEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcWlanHWIndex }
::= { wlcWlanHWTable 1 }
WlcWlanHWEntry ::=
SEQUENCE {
wlcWlanHWIndex INTEGER,
wlcWlanHWName DisplayString,
wlcWlanHWTxPowerSteps DisplayString,
wlcWlanHWShortRetries TruthValue,
wlcWlanHWLongRetries TruthValue,
wlcWlanHWFragmentationThreshold TruthValue,
wlcWlanHWNoSpatialRx INTEGER,
wlcWlanHWNoSpatialTx INTEGER,
wlcWlanHWBands BITS,
wlcWlanHWModes BITS,
wlcWlanHWBandwidth TruthValue,
wlcWlanHWShortGI TruthValue,
wlcWlanHWGreenfield TruthValue,
wlcWlanHWRxSTBC TruthValue,
wlcWlanHWTxSTBC TruthValue,
wlcWlanHWSkipModes BITS
}
wlcWlanHWIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique WLAN hardware index.
"
::= { wlcWlanHWEntry 1 }
wlcWlanHWName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the WLAN hardware.
"
::= { wlcWlanHWEntry 2 }
wlcWlanHWTxPowerSteps OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The steps of the TX power the wireless card supports.
"
::= { wlcWlanHWEntry 3 }
wlcWlanHWShortRetries OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable says if the wireless card supports
the configuration of the short retry value or not.
Default is false.
"
DEFVAL { false }
::= { wlcWlanHWEntry 4 }
wlcWlanHWLongRetries OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable says if the wireless card supports
the configuration of the long retry value or not.
Default is false.
"
DEFVAL { false }
::= { wlcWlanHWEntry 5 }
wlcWlanHWFragmentationThreshold OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable says if the wireless card supports
the configuration of the fragmentation threshold
value or not.
"
DEFVAL { false }
::= { wlcWlanHWEntry 6 }
wlcWlanHWNoSpatialRx OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of receivable spatial
streams.
"
::= { wlcWlanHWEntry 7 }
wlcWlanHWNoSpatialTx OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the maximum of transmittable spatial
streams.
"
::= { wlcWlanHWEntry 8 }
wlcWlanHWBands OBJECT-TYPE
SYNTAX BITS{
band24(0),
band5(1),
band58(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The supported WLAN bands.
"
DEFVAL { {} }
::= { wlcWlanHWEntry 9 }
wlcWlanHWModes OBJECT-TYPE
SYNTAX BITS{
m802-11a(0),
m802-11b(1),
m802-11g(2),
m802-11n(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Supported WLAN modes.
"
DEFVAL { {m802-11b} }
::= { wlcWlanHWEntry 10 }
wlcWlanHWBandwidth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The supported bandwidth capabilities of the radio.
In case of false only 20MHz bandwidth is supported.
In case of true also 40MHz bandwidth is supported.
"
DEFVAL { false }
::= { wlcWlanHWEntry 11 }
wlcWlanHWShortGI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the Short Guard
option is implemented. The default value of this
attribute is FALSE.
"
DEFVAL { false }
::= { wlcWlanHWEntry 12 }
wlcWlanHWGreenfield OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the HT Greenfield
option is implemented. The default value of this attribute is FALSE.
"
DEFVAL { false }
::= { wlcWlanHWEntry 13 }
wlcWlanHWRxSTBC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the entity is
capable of receiving frames that are sent using the Space-Time Block Code
(STBC). The default value of this attribute is FALSE.
"
DEFVAL { false }
::= { wlcWlanHWEntry 14 }
wlcWlanHWTxSTBC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute, when TRUE, indicates that the entity is
capable of transmitting frames using Space-Time Block Code (STBC) option.
The default value of this attribute is FALSE.
"
DEFVAL { false }
::= { wlcWlanHWEntry 15 }
wlcWlanHWSkipModes OBJECT-TYPE
SYNTAX BITS { ap24ghz(0), ap5ghz(1), client24ghz(2), client5ghz(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable says which modes of the WlanIfSkipChannels the wireless card supports.
"
DEFVAL { {} }
::= { wlcWlanHWEntry 16 }
-- **********************************************************************
-- * wlcWlanIfStatTable TABLE
-- **********************************************************************
wlcWlanIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcWlanIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the current settings and statistics of each
WLAN interface.
"
::= { wlc 25 }
wlcWlanIfStatEntry OBJECT-TYPE
SYNTAX WlcWlanIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcWlanIfStatIndex }
::= { wlcWlanIfStatTable 1 }
WlcWlanIfStatEntry ::=
SEQUENCE {
wlcWlanIfStatIndex INTEGER,
wlcWlanIfStatChannel INTEGER,
wlcWlanIfStatSecondaryChannel INTEGER,
wlcWlanIfStatAddress MacAddress,
wlcWlanIfStatType INTEGER,
wlcWlanIfStatBand INTEGER,
wlcWlanIfStatMode INTEGER,
wlcWlanIfStatTxPower INTEGER,
wlcWlanIfStatFortyMHzOperation TruthValue,
wlcWlanIfStatShortGI TruthValue,
wlcWlanIfStatNoSpatialEnabled INTEGER,
wlcWlanIfStatGreenfield TruthValue,
wlcWlanIfStatTxPackets Counter32,
wlcWlanIfStatTxBytes Counter32,
wlcWlanIfStatTxDropped Counter32,
wlcWlanIfStatRxPackets Counter32,
wlcWlanIfStatRxBytes Counter32,
wlcWlanIfStatRxErrors Counter32,
wlcWlanIfStatAssociated INTEGER,
wlcWlanIfStatOperState TruthValue
}
wlcWlanIfStatIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uniqe WLAN interface statistic index.
"
::= { wlcWlanIfStatEntry 1 }
wlcWlanIfStatChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current selected channel of the requested WLAN interface.
"
::= { wlcWlanIfStatEntry 2 }
wlcWlanIfStatSecondaryChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current secondary channel of the requested WLAN interface.
"
::= { wlcWlanIfStatEntry 3 }
wlcWlanIfStatAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the requested WLAN interface.
"
::= { wlcWlanIfStatEntry 4 }
wlcWlanIfStatType OBJECT-TYPE
SYNTAX INTEGER { off(1),
access-point(2),
client(3),
delete(32) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type which is setup for the requested WLAN interface.
"
DEFVAL { off }
::= { wlcWlanIfStatEntry 5 }
wlcWlanIfStatBand OBJECT-TYPE
SYNTAX INTEGER { b24-GHz(1), b5-GHz(2), b58-GHz(3), b24-5-GHz(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operation band of the requested WLAN interface.
"
DEFVAL { b24-GHz }
::= { wlcWlanIfStatEntry 6 }
wlcWlanIfStatMode OBJECT-TYPE
SYNTAX INTEGER {
m802-11b(1),
m802-11g(2),
m802-11mixed(3),
m802-11mixed-long(4),
m802-11mixed-short(5),
m802-11a(6),
m802-11bgn(7),
m802-11gn(8),
m802-11n(10),
m802-11an(11),
m802-11abg(12),
m802-11abgn(13),
m802-11agn(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operation mode of the requested WLAN interface.
"
DEFVAL { m802-11bgn }
::= { wlcWlanIfStatEntry 7 }
wlcWlanIfStatTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current transmit power of the requested WLAN interface.
"
::= { wlcWlanIfStatEntry 8 }
wlcWlanIfStatFortyMHzOperation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is TRUE if the requested WLAN interface currently
operates with 40MHz bandwidth.
"
::= { wlcWlanIfStatEntry 9 }
wlcWlanIfStatShortGI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is TRUE if the short guard interval is currently
enabled on the requested WLAN interface.
"
::= { wlcWlanIfStatEntry 10 }
wlcWlanIfStatNoSpatialEnabled OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of enabled spatial stream on the requested WLAN interface.
"
::= { wlcWlanIfStatEntry 11 }
wlcWlanIfStatGreenfield OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is TRUE if the green field option is currently
enabled on the requested WLAN interface.
"
::= { wlcWlanIfStatEntry 12 }
wlcWlanIfStatTxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted packets.
"
::= { wlcWlanIfStatEntry 13 }
wlcWlanIfStatTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted bytes.
"
::= { wlcWlanIfStatEntry 14 }
wlcWlanIfStatTxDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of dropped packets in transmit direction.
"
::= { wlcWlanIfStatEntry 15 }
wlcWlanIfStatRxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received packets.
"
::= { wlcWlanIfStatEntry 16 }
wlcWlanIfStatRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received bytes.
"
::= { wlcWlanIfStatEntry 17 }
wlcWlanIfStatRxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is counting packets
that were not received correctly.
"
::= { wlcWlanIfStatEntry 18 }
wlcWlanIfStatAssociated OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of currently associated clients.
"
::= { wlcWlanIfStatEntry 19 }
wlcWlanIfStatOperState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reflects the operational state of
the corresponding WLAN card.
'true' -> radio is enabled, 'false' -> radio is disabled.
"
DEFVAL { false }
::= { wlcWlanIfStatEntry 20 }
-- **********************************************************************
-- * wlcVSSStatTable TABLE
-- **********************************************************************
wlcVSSStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcVSSStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistic information about each VSS.
"
::= { wlc 26 }
wlcVSSStatEntry OBJECT-TYPE
SYNTAX WlcVSSStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcVSSStatVSSIndex }
::= { wlcVSSStatTable 1 }
WlcVSSStatEntry ::=
SEQUENCE {
wlcVSSStatVSSIndex INTEGER,
wlcVSSStatCurrent INTEGER,
wlcVSSStatBytesTx Counter32,
wlcVSSStatBytesRx Counter32,
wlcVSSStatBSSID MacAddress,
wlcVSSStatOperState TruthValue,
wlcVSSStatSoftTotalDenied INTEGER,
wlcVSSStatBSMovements INTEGER,
wlcVSSStatClearCounter INTEGER,
wlcVSSStatTotalDenied INTEGER
}
wlcVSSStatVSSIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique VSS index.
"
::= { wlcVSSStatEntry 1 }
wlcVSSStatCurrent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of currently associated stations.
"
::= { wlcVSSStatEntry 2 }
wlcVSSStatBytesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted Bytes.
"
::= { wlcVSSStatEntry 3 }
wlcVSSStatBytesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Bytes.
"
::= { wlcVSSStatEntry 4 }
wlcVSSStatBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current BSSID for the service set.
"
::= { wlcVSSStatEntry 5 }
wlcVSSStatOperState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current OperState for the service set.
"
::= { wlcVSSStatEntry 6 }
wlcVSSStatSoftTotalDenied OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of rejected clients due to wlcVSSProfileSoftTotal limit."
::= { wlcVSSStatEntry 7 }
wlcVSSStatBSMovements OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of clients moved to other band by band steering mechanism."
::= { wlcVSSStatEntry 8 }
wlcVSSStatClearCounter OBJECT-TYPE
SYNTAX INTEGER { counting(1), clearing(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"counting := accounting is active,
clearing := clear all statistics"
DEFVAL { counting }
::= { wlcVSSStatEntry 9 }
wlcVSSStatTotalDenied OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of rejected clients due to wlcVSSProfileTotal limit."
::= { wlcVSSStatEntry 10 }
-- **********************************************************************
-- * wlcScanResultsTable TABLE
-- **********************************************************************
wlcScanResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcScanResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the list of BSS entries found by foreground
or background scanning.
"
::= { wlc 27 }
wlcScanResultsEntry OBJECT-TYPE
SYNTAX WlcScanResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcScanResultsIndex, wlcScanResultswlanIfIndex }
::= { wlcScanResultsTable 1 }
WlcScanResultsEntry ::=
SEQUENCE {
wlcScanResultsIndex INTEGER,
wlcScanResultswlanIfIndex INTEGER,
wlcScanResultsBSSID MacAddress,
wlcScanResultsRSSI WlanRSSI,
wlcScanResultsSSID DisplayString,
wlcScanResultsChannel INTEGER,
wlcScanResultsPrivacy INTEGER,
wlcScanResultsType INTEGER,
wlcScanResultsWPAUnicastCipher BITS,
wlcScanResultsRSNUnicastCipher BITS,
wlcScanResultsAPType INTEGER,
wlcScanResultsLastSeen Date
}
wlcScanResultsIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Auxiliary index for different BSS entries.
"
::= { wlcScanResultsEntry 1 }
wlcScanResultswlanIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of WLAN Interface the scan results belong to.
"
::= { wlcScanResultsEntry 2 }
wlcScanResultsBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BSSID of this BSS.
"
::= { wlcScanResultsEntry 3 }
wlcScanResultsRSSI OBJECT-TYPE
SYNTAX WlanRSSI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive signal strength of this BSS.
"
::= { wlcScanResultsEntry 4 }
wlcScanResultsSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID aka network name of this BSS.
If broadcasting of SSID is disabled on this
BSS, this string may be empty.
"
::= { wlcScanResultsEntry 5 }
wlcScanResultsChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel this BSS was received on.
"
::= { wlcScanResultsEntry 6 }
wlcScanResultsPrivacy OBJECT-TYPE
SYNTAX INTEGER {
none (1),
wep(2),
wpa-psk(3),
wpaandwpa2-psk(4),
wpa2-psk(5),
wpa-enterprise(6),
wpaandwpa2-enterprise(7),
wpa2-enterprise(8)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the privacy type of the
scanned device.
"
DEFVAL { none }
::= { wlcScanResultsEntry 7 }
wlcScanResultsType OBJECT-TYPE
SYNTAX INTEGER { access-point(1), ad-hoc(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the device type of the
scanned device.
"
DEFVAL { access-point }
::= { wlcScanResultsEntry 8 }
wlcScanResultsWPAUnicastCipher OBJECT-TYPE
SYNTAX BITS {
cipher-none(0),
cipher-wep40(1),
cipher-wep104(2),
cipher-tkip(3),
cipher-aes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the WPA unicast ciphers of the
scanned device.
"
DEFVAL { {cipher-none} }
::= { wlcScanResultsEntry 9 }
wlcScanResultsRSNUnicastCipher OBJECT-TYPE
SYNTAX BITS {
cipher-none(0),
cipher-wep40(1),
cipher-wep104(2),
cipher-tkip(3),
cipher-aes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the RSN unicast ciphers of the
scanned device.
"
DEFVAL { {cipher-none} }
::= { wlcScanResultsEntry 10 }
wlcScanResultsAPType OBJECT-TYPE
SYNTAX INTEGER { own(1),
neighborhood(2),
rogue(3),
own-manipulated(4),
knownneighbor (5),
knownrogue (6) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the type of the scanned access point.
'own' -> managed AP, 'neighborhood' -> neighborhood AP
'rogue' -> foreign AP but with one of our SSIDs,
'own-manipulated' -> managed AP but with manipulated configuration.
'knownneighbor' -> a neigborhood AP but well known by wlcKnownAPTable
'knownrogue' -> foreign AP with one of our SSIDs but is well known
by wlcKnownAPTable
"
DEFVAL { own }
::= { wlcScanResultsEntry 11 }
wlcScanResultsLastSeen OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains that time when an access point or client was
seen for the last time.
"
::= { wlcScanResultsEntry 12 }
-- **********************************************************************
-- * wlcStationTable TABLE
-- **********************************************************************
wlcStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcStationTable contains information relating to the
clients currently associated to our WTPs.
Each entry corresponds to
an associated client station (STA).
Entries cannot be added or deleted by the user.
"
::= { wlc 28 }
wlcStationEntry OBJECT-TYPE
SYNTAX WlcStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcStationIndex, wlcStationVSSIndex }
::= { wlcStationTable 1 }
WlcStationEntry ::=
SEQUENCE {
wlcStationIndex INTEGER,
wlcStationVSSIndex INTEGER,
wlcStationAddress MacAddress,
wlcStationInetAddressType InetAddressType,
wlcStationInetAddress IpAddress,
wlcStationState INTEGER,
wlcStationSecurity INTEGER,
wlcStationMSDUTx Counter32,
wlcStationMSDURx Counter32,
wlcStationBytesTx Counter32,
wlcStationBytesRx Counter32,
wlcStationRate WlanRate,
wlcStationSignal WlanRSSI,
wlcStationRSSI1 WlanRSSI,
wlcStationRSSI2 WlanRSSI,
wlcStationRSSI3 WlanRSSI,
wlcStationNoise WlanRSSI,
wlcStationUpTime Counter32,
wlcStationRxBW40 TruthValue,
wlcStationRxShortGI TruthValue,
wlcStationTxBW40 TruthValue,
wlcStationTxShortGI TruthValue,
wlcStationTxFrames11 Counter32,
wlcStationTxFrames24 Counter32,
wlcStationTxFrames54 Counter32,
wlcStationTxFramesMCS3 Counter32,
wlcStationTxFramesMCS7 Counter32,
wlcStationTxFramesMCS11 Counter32,
wlcStationTxFramesMCS15 Counter32,
wlcStationRxFrames11 Counter32,
wlcStationRxFrames24 Counter32,
wlcStationRxFrames54 Counter32,
wlcStationRxFramesMCS3 Counter32,
wlcStationRxFramesMCS7 Counter32,
wlcStationRxFramesMCS11 Counter32,
wlcStationRxFramesMCS15 Counter32,
wlcStationRxAirtime Counter64,
wlcStationTxAirtime Counter64,
wlcStationLastSeen Date,
wlcStationRxDiscards Counter32,
wlcStationTxDiscards Counter32
}
wlcStationIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique station index.
"
::= { wlcStationEntry 1 }
wlcStationVSSIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index of the associated Service Set.
"
::= { wlcStationEntry 2 }
wlcStationAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address of the Assigned STA.
"
::= { wlcStationEntry 3 }
wlcStationInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of the STA.
"
::= { wlcStationEntry 4 }
wlcStationInetAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the IP address of the client.
It is only available if any IP frames have been
received from the client.
"
::= { wlcStationEntry 5 }
wlcStationState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
associating(2),
associated(3),
authenticate(4),
authenticated(5),
delete(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current state of the station.
"
DEFVAL { none }
::= { wlcStationEntry 6 }
wlcStationSecurity OBJECT-TYPE
SYNTAX INTEGER {
none(1),
wep40(2),
wep104(3),
wpa-psk(4),
wpa(5),
wpa2(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Security Option of the Station.
"
DEFVAL { none }
::= { wlcStationEntry 7 }
wlcStationMSDUTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the total number of
packets transmitted to this station.
"
::= { wlcStationEntry 8 }
wlcStationMSDURx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the total number of
packets received from this station.
"
::= { wlcStationEntry 9 }
wlcStationBytesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the total number of
octets transmitted to this station.
"
::= { wlcStationEntry 10 }
wlcStationBytesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the total number of
octets received from this station.
"
::= { wlcStationEntry 11 }
wlcStationRate OBJECT-TYPE
SYNTAX WlanRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reflects the data rate of the latest
packet received from this station, in 500 kbps units.
"
::= { wlcStationEntry 12 }
wlcStationSignal OBJECT-TYPE
SYNTAX WlanRSSI
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the received signal strength in dBm.
"
::= { wlcStationEntry 13 }
wlcStationRSSI1 OBJECT-TYPE
SYNTAX WlanRSSI
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the received signal strength at the
first receiver in dBm. The value 0 indicates no connection.
"
::= { wlcStationEntry 14 }
wlcStationRSSI2 OBJECT-TYPE
SYNTAX WlanRSSI
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the received signal strength at the
second receiver in dBm. The value 0 indicates no connection
or no second receiver present.
"
::= { wlcStationEntry 15 }
wlcStationRSSI3 OBJECT-TYPE
SYNTAX WlanRSSI
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the received signal strength at the
third receiver in dBm. The value 0 indicates no connection
or no third receiver present.
"
::= { wlcStationEntry 16 }
wlcStationNoise OBJECT-TYPE
SYNTAX WlanRSSI
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the measured noise level in dBm, or
0 if no connection can be established.
"
::= { wlcStationEntry 17 }
wlcStationUpTime OBJECT-TYPE
SYNTAX Counter32
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute records the system uptime at the moment
the client successfully finished association.
"
::= { wlcStationEntry 18 }
wlcStationRxBW40 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows if the station is able to receive pakets
with 40MHz bandwidth.
"
::= { wlcStationEntry 19 }
wlcStationRxShortGI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows if the station is able to receive pakets
with short guard interval.
"
::= { wlcStationEntry 20 }
wlcStationTxBW40 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows if the station is able to transmit pakets
with 40 MHz bandwidth.
"
::= { wlcStationEntry 21 }
wlcStationTxShortGI OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows if the station is able to transmit pakets
with short guard interval.
"
::= { wlcStationEntry 22 }
wlcStationTxFrames11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of data
frames that were transmitted at 11 Mbps.
"
::= { wlcStationEntry 23 }
wlcStationTxFrames24 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of data
frames that were transmitted at 24 Mbps.
"
::= { wlcStationEntry 24 }
wlcStationTxFrames54 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of data
frames that were transmitted at 54 Mbps.
"
::= { wlcStationEntry 25 }
wlcStationTxFramesMCS3 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of HT data
frames that were transmitted at MCS 3.
"
::= { wlcStationEntry 26 }
wlcStationTxFramesMCS7 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of HT data
frames that were transmitted at MCS 7.
"
::= { wlcStationEntry 27 }
wlcStationTxFramesMCS11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of HT data
frames that were transmitted at MCS 11.
"
::= { wlcStationEntry 28 }
wlcStationTxFramesMCS15 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of HT data
frames that were transmitted at MCS 15.
"
::= { wlcStationEntry 29 }
wlcStationRxFrames11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of data
frames that were received at 11 Mbps.
"
::= { wlcStationEntry 30 }
wlcStationRxFrames24 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of data
frames that were received at 24 Mbps.
"
::= { wlcStationEntry 31 }
wlcStationRxFrames54 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of data
frames that were received at 54 Mbps.
"
::= { wlcStationEntry 32 }
wlcStationRxFramesMCS3 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of HT data
frames that were received at MCS 3.
"
::= { wlcStationEntry 33 }
wlcStationRxFramesMCS7 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of HT data
frames that were received at MCS 7.
"
::= { wlcStationEntry 34 }
wlcStationRxFramesMCS11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of HT data
frames that were received at MCS 11.
"
::= { wlcStationEntry 35 }
wlcStationRxFramesMCS15 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute shows the number of HT data
frames that were received at MCS 15.
"
::= { wlcStationEntry 36 }
wlcStationRxAirtime OBJECT-TYPE
SYNTAX Counter64
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accumulated estimated time in microseconds for all
unidirectional frames received from this station.
"
::= { wlcStationEntry 37 }
wlcStationTxAirtime OBJECT-TYPE
SYNTAX Counter64
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accumulated estimated time in microseconds for all
unidirectional frames transmitted to this station.
"
::= { wlcStationEntry 38 }
wlcStationLastSeen OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the last received frame by this Station"
DEFVAL { 0 }
::= { wlcStationEntry 39 }
wlcStationRxDiscards OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of discarded bytes due to bandwidth limitation."
::= { wlcStationEntry 40 }
wlcStationTxDiscards OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of discarded bytes due to bandwidth limitation."
::= { wlcStationEntry 41 }
-- **********************************************************************
-- * wlcACLDeniedTable TABLE
-- **********************************************************************
wlcACLDeniedTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcACLDeniedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains all MAC Addresses of denied clients.
"
::= { wlc 29 }
wlcACLDeniedEntry OBJECT-TYPE
SYNTAX WlcACLDeniedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcACLDeniedIndex }
::= { wlcACLDeniedTable 1 }
WlcACLDeniedEntry ::=
SEQUENCE {
wlcACLDeniedIndex INTEGER,
wlcACLDeniedVSSIndex INTEGER,
wlcACLDeniedAddress MacAddress,
wlcACLDeniedCount Counter32,
wlcACLDeniedAge Counter32
}
wlcACLDeniedIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of the denied client.
"
::= { wlcACLDeniedEntry 1 }
wlcACLDeniedVSSIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VSS interface index where the denied client blongs to.
"
::= { wlcACLDeniedEntry 2 }
wlcACLDeniedAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC Address of the denied Client.
"
::= { wlcACLDeniedEntry 3 }
wlcACLDeniedCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of detected denials of this MAC Address.
"
::= { wlcACLDeniedEntry 4 }
wlcACLDeniedAge OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Age of the last denial.
"
::= { wlcACLDeniedEntry 5 }
-- **********************************************************************
-- * wlcKnownAPTable TABLE
-- **********************************************************************
wlcKnownAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcKnownAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of known AP's and how
they should be handled.
"
::= { wlc 30 }
wlcKnownAPEntry OBJECT-TYPE
SYNTAX WlcKnownAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcKnownAPBSSID }
::= { wlcKnownAPTable 1 }
WlcKnownAPEntry ::=
SEQUENCE {
wlcKnownAPBSSID MacAddress,
wlcKnownAPLastSeen Date,
wlcKnownAPType INTEGER,
wlcKnownAPDescription DisplayString
}
wlcKnownAPBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The BSSID of the rouge AP.
"
::= { wlcKnownAPEntry 1 }
wlcKnownAPLastSeen OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp, when this known AP was last seen.
"
DEFVAL { 0 }
::= { wlcKnownAPEntry 2 }
wlcKnownAPType OBJECT-TYPE
SYNTAX INTEGER {
neighborhood(2),
rogue(3),
delete(15) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute contains the type of the well known AP. If it is set to
'neighborhood' but the found AP is also a rogue the rogue message will still
be displayed. If it is set to 'rogue' no message for either neighborhood or
rogue appears. Set this value to 'delete' to remove this entry.
"
DEFVAL { rogue }
::= { wlcKnownAPEntry 3 }
wlcKnownAPDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A user defined description for this known AP.
"
::= { wlcKnownAPEntry 4 }
--- ***************************************************************************
--- * wlcVSSAuthProfileTable
--- ***************************************************************************
wlcVSSAuthProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcVSSAuthProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the different VSS Authentication profiles."
::= { wlc 31 }
wlcVSSAuthProfileEntry OBJECT-TYPE
SYNTAX WlcVSSAuthProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcVSSAuthProfileWlcVSSProfIndex }
::= { wlcVSSAuthProfileTable 1 }
WlcVSSAuthProfileEntry ::=
SEQUENCE {
wlcVSSAuthProfileWlcVSSProfIndex INTEGER,
wlcVSSAuthProfileReAuthPeriod INTEGER,
wlcVSSAuthProfileGroupRekeyStrict TruthValue,
wlcVSSAuthProfileGroupRekeyTime INTEGER,
wlcVSSAuthProfileBlacklistTrials INTEGER,
wlcVSSAuthProfileBlacklistTime INTEGER,
wlcVSSAuthProfileBlacklistDuration Unsigned32
}
wlcVSSAuthProfileWlcVSSProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reference to VSS Profile entry (wlcVSSProfileIndex) this
authentication parameters correspond to."
::= { wlcVSSAuthProfileEntry 1 }
wlcVSSAuthProfileReAuthPeriod OBJECT-TYPE
SYNTAX INTEGER ( 0..86400 )
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EAP reauthentication period in seconds (0=disabled)."
DEFVAL { 3600 }
::= { wlcVSSAuthProfileEntry 2 }
wlcVSSAuthProfileGroupRekeyStrict OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rekey GTK when any STA that possesses the current GTK is leaving
the BSS."
DEFVAL { false }
::= { wlcVSSAuthProfileEntry 3 }
wlcVSSAuthProfileGroupRekeyTime OBJECT-TYPE
SYNTAX INTEGER ( 1..604800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval for rekeying GTK in seconds."
DEFVAL { 86400 }
::= { wlcVSSAuthProfileEntry 4 }
wlcVSSAuthProfileBlacklistTrials OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of failed authentication trials per
wlcVSSAuthProfileBlacklistTime before a station is stored into the
dynamic blacklist."
DEFVAL { 10 }
::= { wlcVSSAuthProfileEntry 5 }
wlcVSSAuthProfileBlacklistTime OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time within a station may perform wlcVSSAuthPRofileBlacklistTrials
failed authentication trials, before it is temporatily blacklisted."
DEFVAL { 60 }
::= { wlcVSSAuthProfileEntry 6 }
wlcVSSAuthProfileBlacklistDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time a station is kept in the dynamic blacklist after too many
failed authentication attempts. A value of 0 indicates forever."
DEFVAL { 500 }
::= { wlcVSSAuthProfileEntry 7 }
--- ***************************************************************************
--- * wlcStaticBlacklistProfileTable
--- ***************************************************************************
wlcStaticBlacklistProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcStaticBlacklistProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcStaticBlacklistProfile contains information about stations that are
blacklisted due to administrative actions."
::= { wlc 32 }
wlcStaticBlacklistProfileEntry OBJECT-TYPE
SYNTAX WlcStaticBlacklistProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcStaticBlacklistProfileVSSProfIndex,
wlcStaticBlacklistProfileSTAMac }
::= { wlcStaticBlacklistProfileTable 1 }
WlcStaticBlacklistProfileEntry ::=
SEQUENCE {
wlcStaticBlacklistProfileSTAMac MacAddress,
wlcStaticBlacklistProfileVSSProfIndex INTEGER,
wlcStaticBlacklistProfileRowStatus RowStatus
}
wlcStaticBlacklistProfileSTAMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address of the station to blacklist."
::= { wlcStaticBlacklistProfileEntry 1 }
wlcStaticBlacklistProfileVSSProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The SSID (wlcVSSProfileIndex) this blacklist entry is
associated to."
::= { wlcStaticBlacklistProfileEntry 2 }
wlcStaticBlacklistProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row-status of a blacklist entry."
DEFVAL { createAndWait }
::= { wlcStaticBlacklistProfileEntry 3 }
--- ***************************************************************************
--- * wlcDynamicBlacklistProfileTable
--- ***************************************************************************
wlcDynamicBlacklistProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcDynamicBlacklistProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcDynamicBlacklistProfile contains information about stations that
are blacklisted as a countermeasure to inappropriate behaviour."
::= { wlc 33 }
wlcDynamicBlacklistProfileEntry OBJECT-TYPE
SYNTAX WlcDynamicBlacklistProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcDynamicBlacklistProfileVSSProfIndex,
wlcDynamicBlacklistProfileSTAMac }
::= { wlcDynamicBlacklistProfileTable 1 }
WlcDynamicBlacklistProfileEntry ::=
SEQUENCE {
wlcDynamicBlacklistProfileSTAMac MacAddress,
wlcDynamicBlacklistProfileVSSProfIndex INTEGER,
wlcDynamicBlacklistProfileFirstSeen Date,
wlcDynamicBlacklistProfileLastSeen Date,
wlcDynamicBlacklistProfileLastRSSI INTEGER,
wlcDynamicBlacklistProfileReason INTEGER,
wlcDynamicBlacklistProfileWTPIndex INTEGER,
wlcDynamicBlacklistProfileRowStatus RowStatus
}
wlcDynamicBlacklistProfileSTAMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the station that is blacklisted."
::= { wlcDynamicBlacklistProfileEntry 1 }
wlcDynamicBlacklistProfileVSSProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SSID on a specific WTP (wlcVSSIndex) a station belongs to."
::= { wlcDynamicBlacklistProfileEntry 2 }
wlcDynamicBlacklistProfileFirstSeen OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1st time a blacklisted station drew attention."
::= { wlcDynamicBlacklistProfileEntry 3 }
wlcDynamicBlacklistProfileLastSeen OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time a blacklisted station drew attention."
::= { wlcDynamicBlacklistProfileEntry 4 }
wlcDynamicBlacklistProfileReason OBJECT-TYPE
SYNTAX INTEGER {
badauth(1),
invalidFrame(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason why a station is blacklisted."
DEFVAL { badauth }
::= { wlcDynamicBlacklistProfileEntry 5 }
wlcDynamicBlacklistProfileLastRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI of station it annoyed last time."
::= { wlcDynamicBlacklistProfileEntry 6 }
wlcDynamicBlacklistProfileWTPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WTP the station was blacklisted at."
::= { wlcDynamicBlacklistProfileEntry 7}
wlcDynamicBlacklistProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of the blacklist entry.
Although the conceptual row is not creatable by the user,
one is able to set the row to notInService."
DEFVAL { createAndWait }
::= { wlcDynamicBlacklistProfileEntry 8 }
--- ***************************************************************************
--- * wlcVSSBadAuthAcctTable
--- ***************************************************************************
wlcVSSBadAuthAcctTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcVSSAuthAcctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcAuthAcct contains some authentication accounting parameters for a
wlcVSS."
::= { wlc 34 }
wlcVSSBadAuthAcctEntry OBJECT-TYPE
SYNTAX WlcVSSAuthAcctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcVSSBadAuthAcctWlcVSSProfIndex, wlcVSSBadAuthAcctSTAMac }
::= { wlcVSSBadAuthAcctTable 1 }
WlcVSSAuthAcctEntry ::=
SEQUENCE {
wlcVSSBadAuthAcctWlcVSSProfIndex INTEGER,
wlcVSSBadAuthAcctSTAMac MacAddress,
wlcVSSBadAuthAcctTime1stFail Date,
wlcVSSBadAuthAcctTimeLastFail Date,
wlcVSSBadAuthAcctNumFailAttempts INTEGER,
wlcVSSBadAuthAcctLastRSSI INTEGER,
wlcVSSBadAuthAcctWTPIndex INTEGER
}
wlcVSSBadAuthAcctWlcVSSProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference to wlcVSS entry this authentication accounting
information corresponds to."
::= { wlcVSSBadAuthAcctEntry 1 }
wlcVSSBadAuthAcctSTAMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the station the failed authentication attempts
are originating from."
::= { wlcVSSBadAuthAcctEntry 2 }
wlcVSSBadAuthAcctTime1stFail OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the first failed authentication attempt. This entry
is deleted after 1 hour of inactivity."
::= { wlcVSSBadAuthAcctEntry 3 }
wlcVSSBadAuthAcctTimeLastFail OBJECT-TYPE
SYNTAX Date
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp of the last failed authentication attempt."
::= { wlcVSSBadAuthAcctEntry 4 }
wlcVSSBadAuthAcctNumFailAttempts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed authentication attempts from a given station
on a given wlcVSS since the first failed authentication attempt
within an hour."
::= { wlcVSSBadAuthAcctEntry 5 }
wlcVSSBadAuthAcctLastRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last RSSI of the station with failing authentication."
::= { wlcVSSBadAuthAcctEntry 6 }
wlcVSSBadAuthAcctWTPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last WTP a station with failing to authenticate was seen."
::= { wlcVSSBadAuthAcctEntry 7 }
-- **********************************************************************
-- * wlcAutoSelectorTable TABLE
-- **********************************************************************
wlcAutoSelectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcAutoSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table defines a selector to lookup a WTP in the wlcAutoWTPTable.
See wlcAutoWTPSelectorIndex.
"
::= { wlc 35 }
wlcAutoSelectorEntry OBJECT-TYPE
SYNTAX WlcAutoSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcAutoSelectorIndex }
::= { wlcAutoSelectorTable 1 }
WlcAutoSelectorEntry ::=
SEQUENCE {
wlcAutoSelectorIndex INTEGER,
wlcAutoSelectorMacAddress MacAddress,
wlcAutoSelectorInetAddressType InetAddressType,
wlcAutoSelectorInetAddress IpAddress,
wlcAutoSelectorInetMask IpAddress
}
wlcAutoSelectorIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique selector index.
"
::= { wlcAutoSelectorEntry 1 }
wlcAutoSelectorMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selector: ethernet MAC address of the WTP.
The address 00:00:00:00:00:00 matches for any MAC address.
"
::= { wlcAutoSelectorEntry 2 }
wlcAutoSelectorInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selector: IP address type.
It may be one of:
-unknown(0): means that any IP address matches
-ipv4(1) : an IPv4 address
-ipv6(2) : an IPv6 address
All other values are not supported and treated like unknown.
"
::= { wlcAutoSelectorEntry 3 }
wlcAutoSelectorInetAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selector: IP address.
"
::= { wlcAutoSelectorEntry 4 }
wlcAutoSelectorInetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selector: IP netmask.
"
::= { wlcAutoSelectorEntry 5 }
-- **********************************************************************
-- * wlcAutoWTPTable TABLE
-- **********************************************************************
wlcAutoWTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcAutoWTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table defines auto configuration of each WTP.
"
::= { wlc 36 }
wlcAutoWTPEntry OBJECT-TYPE
SYNTAX WlcAutoWTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcAutoWTPIndex }
::= { wlcAutoWTPTable 1 }
WlcAutoWTPEntry ::=
SEQUENCE {
wlcAutoWTPIndex INTEGER,
wlcAutoWTPSelectorIndex INTEGER,
wlcAutoWTPLocation DisplayString,
wlcAutoWTPDescription DisplayString,
wlcAutoWTPsecIndex INTEGER,
wlcAutoWTPlocalServicesIndex INTEGER
}
wlcAutoWTPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index.
"
::= { wlcAutoWTPEntry 1 }
wlcAutoWTPSelectorIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured Selector index.
See wlcAutoSelectorIndex.
"
::= { wlcAutoWTPEntry 2 }
wlcAutoWTPLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Location of the requested WTP.
"
::= { wlcAutoWTPEntry 3 }
wlcAutoWTPDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description of the requested WTP.
"
::= { wlcAutoWTPEntry 4 }
wlcAutoWTPsecIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured secIndex
of the requested WTP.
"
::= { wlcAutoWTPEntry 5 }
wlcAutoWTPlocalServicesIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shows the currently configured localServicesIndex
of the requested WTP.
"
::= { wlcAutoWTPEntry 6 }
-- **********************************************************************
-- * wlcAutoVSSTable TABLE
-- **********************************************************************
wlcAutoVSSTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcAutoVSSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table combines auto configured WTP with the VSS profile.
"
::= { wlc 37 }
wlcAutoVSSEntry OBJECT-TYPE
SYNTAX WlcAutoVSSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcAutoVSSIndex }
::= { wlcAutoVSSTable 1 }
WlcAutoVSSEntry ::=
SEQUENCE {
wlcAutoVSSIndex INTEGER,
wlcAutoVSSwlanIfIndex INTEGER,
wlcAutoVSSProfIndex INTEGER
}
wlcAutoVSSIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index.
"
::= { wlcAutoVSSEntry 1 }
wlcAutoVSSwlanIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WLAN interface of the requested WTP WLAN interface.
See wlcAutoWlanIfIndex.
"
::= { wlcAutoVSSEntry 2 }
wlcAutoVSSProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable contains the unique VSS profile index.
See wlcVSSProfIndex.
"
::= { wlcAutoVSSEntry 3 }
-- **********************************************************************
-- * wlcAutoWlanIfTable TABLE
-- **********************************************************************
wlcAutoWlanIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlcAutoWlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlcAutoWlanIfTable contains all auto configured WLAN
interfaces of each WTP with their configured profiles.
"
::= { wlc 38 }
wlcAutoWlanIfEntry OBJECT-TYPE
SYNTAX WlcAutoWlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { wlcAutoWlanIfIndex }
::= { wlcAutoWlanIfTable 1 }
WlcAutoWlanIfEntry ::=
SEQUENCE {
wlcAutoWlanIfIndex INTEGER,
wlcAutoWlanIfWTPIndex INTEGER,
wlcAutoWlanIfRadioNo INTEGER,
wlcAutoWlanIfProfIndex INTEGER,
wlcAutoWlanIfClientIndex INTEGER
}
wlcAutoWlanIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique index.
"
::= { wlcAutoWlanIfEntry 1 }
wlcAutoWlanIfWTPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured WTP index.
See wlcAutoWTPIndex.
"
::= { wlcAutoWlanIfEntry 2 }
wlcAutoWlanIfRadioNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radio number to match.
"
::= { wlcAutoWlanIfEntry 3 }
wlcAutoWlanIfProfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured WLAN interface profile index.
See wlcWlanIfProfileIndex.
"
::= { wlcAutoWlanIfEntry 4 }
wlcAutoWlanIfClientIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index pointer to the wlcClientProfileTable.
"
::= { wlcAutoWlanIfEntry 5 }
END
View Git Blame Copy Permalink