2026 lines
68 KiB
Plaintext
2026 lines
68 KiB
Plaintext
-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00
|
|
|
|
|
|
-- $RCSfile: mib-adsl,v $
|
|
-- $Revision: 1.10 $
|
|
|
|
-- (C)opyright 2007-2014 bintec elmeg GmbH, All Rights Reserved
|
|
|
|
BIANCA-BRICK-ADSL-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Counter32, enterprises, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
adsl
|
|
FROM BINTEC-MIB;
|
|
|
|
-- AdslPerfTimeElapsed ::= INTEGER
|
|
-- "The number of seconds that have elapsed since
|
|
-- the beginning of the current measurement period.
|
|
-- If, for some reason, such as an adjustment in the
|
|
-- system's time-of-day clock, the current interval
|
|
-- exceeds the maximum value, the agent will return
|
|
-- the maximum value."
|
|
-- AdslPerfCurrDayCount ::= INTEGER
|
|
-- "A counter associated with interface performance
|
|
-- measurements in a current 1-day (24 hour) measurement
|
|
-- interval.
|
|
--
|
|
-- The value of this counter starts at zero at the
|
|
-- beginning of an interval and is increased when
|
|
-- associated events occur, until the end of the
|
|
-- 1-day interval. At that time the value of the
|
|
-- counter is stored in the previous 1-day history
|
|
-- interval, if available, and the current interval
|
|
-- counter is restarted at zero.
|
|
--
|
|
-- In the case where the agent has no valid data available
|
|
-- for this interval the corresponding object
|
|
-- instance is not available and upon a retrieval
|
|
-- request a corresponding error message shall be
|
|
-- returned to indicate that this instance does
|
|
-- not exist (for example, a noSuchName error for
|
|
-- SNMPv1 and a noSuchInstance for SNMPv2 GET
|
|
-- operation)."
|
|
-- AdslPerfPrevDayCount ::= INTEGER
|
|
-- "A counter associated with interface performance
|
|
-- measurements during the most previous 1-day (24 hour)
|
|
-- measurement interval. The value of this counter is
|
|
-- equal to the value of the current day counter at
|
|
-- the end of its most recent interval.
|
|
--
|
|
-- In the case where the agent has no valid data available
|
|
-- for this interval the corresponding object
|
|
-- instance is not available and upon a retrieval
|
|
-- request a corresponding error message shall be
|
|
-- returned to indicate that this instance does
|
|
-- not exist (for example, a noSuchName error for
|
|
-- SNMPv1 and a noSuchInstance for SNMPv2 GET
|
|
-- operation)."
|
|
---------------------------------------------------------------------------
|
|
adslMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200908210000Z"
|
|
ORGANIZATION
|
|
"bintec elmeg GmbH"
|
|
CONTACT-INFO
|
|
"EMail: info@bintec-elmeg.com
|
|
Web: www.bintec-elmeg.com
|
|
"
|
|
DESCRIPTION
|
|
"The MIB module defining objects for the management of a pair of
|
|
ADSL modems at each end of the ADSL line. Each such line has
|
|
an entry in an ifTable which may include multiple modem lines.
|
|
An agent may reside at either end of the ADSL line however the
|
|
MIB is designed to require no management communication between
|
|
them beyond that inherent in the low-level ADSL line protocol.
|
|
The agent may monitor and control this protocol for its needs.
|
|
|
|
ADSL lines may support optional Fast or Interleaved channels.
|
|
If these are supported, additional entries corresponding to the
|
|
supported channels must be created in the ifTable. Thus an ADSL
|
|
line that supports both channels will have three entries in the
|
|
ifTable, one for each physical, fast, and interleaved, whose
|
|
ifType values are equal to adsl(94), fast(125), and
|
|
interleaved(124), respectively. The ifStackTable is used to
|
|
represent the relationship between the entries.
|
|
|
|
Naming Conventions:
|
|
Atuc - (ATUC) modem at near (Central) end of line
|
|
Atur - (ATUR) modem at Remote end of line
|
|
Curr - mandatory
|
|
Prev - Previous
|
|
Atn - Attenuation
|
|
ES - Errored Second.
|
|
LCS - Line Code Specific
|
|
Lof - Loss of Frame
|
|
Lol - Loss of Link
|
|
Los - Loss of Signal
|
|
Lpr - Loss of Power
|
|
xxxs- interval of Seconds in which xxx occurs
|
|
(e.g., xxx=Lof, Los, Lpr)
|
|
Max - Maximum
|
|
Mgn - Margin
|
|
Min - Minimum
|
|
Psd - Power Spectral Density
|
|
Snr - Signal to Noise Ratio
|
|
Tx - Transmit
|
|
Blks- Blocks, a data unit, see
|
|
adslAtuXChanCrcBlockLength
|
|
|
|
Build from Initial Version, published as RFC 2662"
|
|
|
|
REVISION "200908210000Z"
|
|
DESCRIPTION
|
|
"First version conforming to SMIv2."
|
|
::= { adsl 250 }
|
|
---------------------------------------------------------------------------
|
|
|
|
adslLineMib OBJECT IDENTIFIER ::= { adsl 1 }
|
|
adslMibObjects OBJECT IDENTIFIER ::= { adslLineMib 1 }
|
|
|
|
adslLineTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes common attributes describing
|
|
far end (ATU-R) of the line. It is required for all ADSL
|
|
physical interfaces. ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 1 }
|
|
|
|
adslLineEntry OBJECT-TYPE
|
|
SYNTAX AdslLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in adslLineTable."
|
|
INDEX { adslLineIfIndex }
|
|
::= { adslLineTable 1 }
|
|
|
|
AdslLineEntry ::= SEQUENCE {
|
|
adslLineIfIndex INTEGER,
|
|
adslLineCoding INTEGER,
|
|
adslLineOpenMode INTEGER,
|
|
adslLineOperationalMode INTEGER,
|
|
adslLineTxGainOffset INTEGER,
|
|
adslLineRxGainOffset INTEGER,
|
|
adslLineType INTEGER,
|
|
adslLineMarginThreshold INTEGER,
|
|
adslLineAnnexType INTEGER,
|
|
adslLineDyingGasp INTEGER,
|
|
adslLineBitSwapping BITS,
|
|
adslLineProfile INTEGER,
|
|
adslLineCodingGainOffset INTEGER,
|
|
adslLineModemCapabilities BITS
|
|
}
|
|
|
|
adslLineIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index used on this line."
|
|
::= { adslLineEntry 1 }
|
|
|
|
adslLineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER { other(1), dmt(2), cap(3), qam(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL coding type used on this line."
|
|
::= { adslLineEntry 2 }
|
|
|
|
adslLineOpenMode OBJECT-TYPE
|
|
SYNTAX INTEGER {open(3), ansiT1dot413(5), gdmt(6), gliteg992dot2(7), multimode(8), adsl2(9), adsl2delt(10),
|
|
adsl2plus(11), adsl2plusdelt(12), readsl2(13), readsl2delt(14),
|
|
multimodeM(15), adsl2plusAnnexM(16), vdsl2(17), multimodeVdsl(18)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL opening mode used on this line. Possible values:
|
|
open (3): do not use adsl line,
|
|
ansiT1dot413 (5): ANSI T1.413,
|
|
gdmt (6): ADSL classic, G.DMT, ITU-T G.992.1
|
|
gliteg992dot2 (7): Splitterless ADSL, G.Lite, ITU-T G.992.2,
|
|
multimode (8),
|
|
adsl2 (9): ADSL2, G.DMT.Bis, ITU-T G.992.3,
|
|
adsl2delt (10: ADSL2 Double Ended Line Test,
|
|
adsl2plus (11): ADSL2 Plus, ITU-T G.992.5,
|
|
adsl2plusdelt (12): ADSL2 Plus Double Ended Line Test,
|
|
readsl2 (13): Reach Extended ADSL2,
|
|
readsl2delt (14): Reach Extended ADSL2 Double Ended Line Test,
|
|
multimodeM (15): multimode including ADSL2(+) Annex M,
|
|
adsl2plusAnnexM (16): ITU-T G.992.5 Annex M,
|
|
vdsl2 (17): VDSL2, ITU-T G.993.2,
|
|
multimodeVdsl (18): contains multimode (8) and vdsl2 (17)"
|
|
|
|
DEFVAL { multimode }
|
|
::= { adslLineEntry 3 }
|
|
|
|
adslLineOperationalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {unknown(1), ansiT1dot413(2), itug992dot1(3), itug992dot2(4), adsl2(5), adsl2delt(6),
|
|
adsl2plus(7), adsl2plusdelt(8), readsl2(9), readsl2delt(10),
|
|
adsl2AnnexM(11), adsl2plusAnnexM(12), vdsl2(13),
|
|
adsl2AnnexJ(14), adsl2plusAnnexJ(15),
|
|
adsl2AnnexI(16), adsl2plusAnnexI(17) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current operational mode :
|
|
unknown (1),
|
|
ansiT1dot413 (2): ANSI T1.413,
|
|
itug992dot1 (3): ADSL classic, G.DMT, ITU-T G.992.1,
|
|
itug992dot2 (4): Splitterless ADSL, ITU-T G.992.2,
|
|
adsl2 (5): G.DMT.Bis ITU-T G.992.3,
|
|
adsl2delt (6): ADSL2 Double Ended Line Test,
|
|
adsl2plus (7): ADSL2 Plus, ITU-T G.992.5,
|
|
adsl2plusdelt (8): ADSL2 Plus Double Ended Line Test,
|
|
readsl2 (9): Reach Extended ADSL2,
|
|
readsl2delt (10): Reach Extended ADSL2 Double Ended Line Test,
|
|
adsl2AnnexM (11): ADSL2 ITU-T G.992.3 Annex M,
|
|
adsl2plusAnnexM (12): ADSL2+ ITU-T G.992.5 Annex M,
|
|
vdsl2 (13): VDSL2, ITU-T G.993.2
|
|
adsl2AnnexJ(14): ADSL2 ITU-T G.992.3 J,
|
|
adsl2plusAnnexJ(15): ADSL2+ ITU-T G.992.5 J,
|
|
adsl2AnnexI(16): ADSL2 ITU-T G.992.3 I,
|
|
adsl2plusAnnexI(17): ADSL2+ ITU-T G.992.5 I"
|
|
::= { adslLineEntry 4 }
|
|
|
|
adslLineTxGainOffset OBJECT-TYPE
|
|
SYNTAX INTEGER (-100..30)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter allows the user to add an offset to the Tx gain
|
|
of the CPE of the modem.
|
|
The offset range is limited between -10dB and +3dB.
|
|
It is expressed in tenth dB with a granularity of 0.5dB.
|
|
The default value is 0 dB."
|
|
DEFVAL { 0 }
|
|
::= { adslLineEntry 5 }
|
|
|
|
adslLineRxGainOffset OBJECT-TYPE
|
|
SYNTAX INTEGER (-50..30)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter allows the user to add an offset to the Rx gain
|
|
of the CPE of the modem.
|
|
The offset range is limited between -5dB and +3dB.
|
|
It is expressed in tenth dB with a granularity of 0.5dB.
|
|
The default value is 0 dB."
|
|
DEFVAL { 0 }
|
|
::= { adslLineEntry 6 }
|
|
|
|
adslLineType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter indicates the adsl line type."
|
|
DEFVAL { 0 }
|
|
::= { adslLineEntry 7 }
|
|
|
|
adslLineMarginThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-320..315)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter allows the user to specify a threshold
|
|
for triggering a retrain, if the downstream margin drops
|
|
below the threshold.
|
|
The offset range is between -32dB and +31.5dB.
|
|
It is expressed in tenth dB with a granularity of 0.5dB.
|
|
The default value is 6 dB."
|
|
DEFVAL { 60 }
|
|
::= { adslLineEntry 8 }
|
|
|
|
adslLineAnnexType OBJECT-TYPE
|
|
SYNTAX INTEGER { annexA(1), annexB(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter allows the user to specify the used ADSL Annex type.
|
|
annexA (1): use annex A for related adsl interface,
|
|
annexB (2): use annex B for related adsl interface."
|
|
DEFVAL { 2 }
|
|
::= { adslLineEntry 9 }
|
|
|
|
adslLineDyingGasp OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(1), enable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter controls the behavior when the dying gasp condition
|
|
is detected. The dying gasp condition is detected when the power
|
|
input falls below a certain voltage level, eg. this happens when
|
|
the ATUR is switched off.
|
|
If dying gasp is enabled in this case the ATUR signals the dying gasp
|
|
indication to the ATUC, so the ATUC could ingore subsequent line
|
|
failures (if instructed to do so) because they are consequence of
|
|
the switched off power.
|
|
If dying gasp is disabled nothing is signalled to the ATUC."
|
|
DEFVAL { 1 }
|
|
::= { adslLineEntry 10 }
|
|
|
|
adslLineBitSwapping OBJECT-TYPE
|
|
SYNTAX BITS { upstream(0), downstream(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter controls the behavior of up- and downstream bit swapping.
|
|
Setting the bit enables the bit swapping in the corresponding direction."
|
|
DEFVAL { { upstream, downstream } }
|
|
::= { adslLineEntry 11 }
|
|
|
|
adslLineProfile OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter adapts the training behaviour, to comply with some
|
|
special configurations used on some ADSL lines or during approval
|
|
tests of their respective ADSL providers.
|
|
The following values are common on all devices:
|
|
0 this parameter is not supported by hardware, do not modify it.
|
|
1 Tiscali UK
|
|
2 France Telecom
|
|
3 Deutsche Telekom
|
|
4 standard behaviour - no special settings
|
|
5 Vodafone Germany
|
|
6 Telekom Austria
|
|
7 British Telecom
|
|
8 Telefonica Spain
|
|
|
|
The other values are only for debugging purpose and their
|
|
meaning depends on the hardware and on the BOSS version."
|
|
DEFVAL { 0 }
|
|
::= { adslLineEntry 13 }
|
|
|
|
-- adslLineCodingGain OBJECT-TYPE
|
|
-- SYNTAX INTEGER (-1..7)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- ::= { adslLineEntry 14 }
|
|
|
|
adslLineCodingGainOffset OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter allows the user to control the Coding Gain
|
|
of the CPE of the modem.
|
|
The coding gain range is limited between 0dB and 7dB, a value
|
|
of -1 lets the CPE choose the coding gain itself.
|
|
The coding gain is expressed in entire dBs. The default value is -1."
|
|
DEFVAL { -1 }
|
|
::= { adslLineEntry 19 }
|
|
|
|
adslLineModemCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
annexA(0),
|
|
annexB(1),
|
|
multimodeM(2),
|
|
vdsl2(3),
|
|
multimodeVdsl(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This bitfield describes which open modes ADSL modem supports:
|
|
annexA : The modem supports ADSL Annex A modes
|
|
annexB : The modem supports ADSL Annex B modes
|
|
multimodeM : To allow additional open modes like
|
|
Annex I, J, M for a bigger
|
|
upstream bandwidth use multimodeM
|
|
vdsl2 : Modem supports VDSL
|
|
multimodeVdsl : Modem detects automatically ADSL and VDSL
|
|
."
|
|
::= { adslLineEntry 20 }
|
|
|
|
|
|
adslAtucPhysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC.
|
|
Each row contains the Physical Layer Parameters
|
|
table for that ATUC. ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 2 }
|
|
|
|
adslAtucPhysEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the adslAtucPhysTable."
|
|
INDEX { adslAtucIfIndex }
|
|
::= { adslAtucPhysTable 1 }
|
|
|
|
AdslAtucPhysEntry ::= SEQUENCE {
|
|
adslAtucIfIndex INTEGER,
|
|
adslAtucInvVendorID DisplayString,
|
|
adslAtucInvVersionNumber DisplayString,
|
|
adslAtucCurrStatus INTEGER,
|
|
adslAtucCurrOutputPwr INTEGER,
|
|
adslAtucCurrAttainableRate INTEGER,
|
|
adslAtucCurrSnrMgn INTEGER,
|
|
adslAtucCurrAtn INTEGER,
|
|
adslAtucCurrPowercutback INTEGER
|
|
}
|
|
|
|
adslAtucIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index."
|
|
::= { adslAtucPhysEntry 1 }
|
|
|
|
adslAtucInvVendorID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor ID code is a copy of the binary
|
|
vendor identification field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
-- REFERENCE
|
|
-- "ANSI T1.413[10]"
|
|
::= { adslAtucPhysEntry 2 }
|
|
|
|
adslAtucInvVersionNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific version number sent by this ATU
|
|
as part of the initialization messages. It is a copy
|
|
of the binary version number field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
-- REFERENCE
|
|
-- "ANSI T1.413[10]"
|
|
::= { adslAtucPhysEntry 3 }
|
|
|
|
adslAtucCurrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ noDefect(1),
|
|
lossOfFraming(2),
|
|
lossOfSignal(3),
|
|
lossOfPower(4),
|
|
lossOfSignalQuality(5),
|
|
lossOfLink(6),
|
|
dataInitFailure(7),
|
|
configInitFailure(8),
|
|
protocolInitFailure(9),
|
|
noPeerAtuPresent(10),
|
|
lossOfCellDelineation(11)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates mandatory state of the ATUC line, i.e. the state of the line
|
|
as seen by ATUC. This is a bit-map of possible conditions. The various bit
|
|
positions are:
|
|
|
|
1 noDefect There no defects on the line
|
|
|
|
2 lossOfFraming ATUC failure due to not
|
|
receiving valid frame.
|
|
|
|
3 lossOfSignal ATUC failure due to not
|
|
receiving signal.
|
|
|
|
4 lossOfPower ATUC failure due to loss of
|
|
power.
|
|
Note: the Agent may still
|
|
function.
|
|
|
|
5 lossOfSignalQuality Loss of Signal Quality is
|
|
declared when the Noise Margin
|
|
falls below the Minimum Noise
|
|
Margin, or the bit-error-rate
|
|
exceeds 10^-7.
|
|
|
|
6 lossOfLink ATUC failure due to inability
|
|
to link with ATUR.
|
|
|
|
7 dataInitFailure ATUC failure during
|
|
initialization due to bit
|
|
errors corrupting startup
|
|
exchange data.
|
|
|
|
8 configInitFailure ATUC failure during
|
|
initialization due to peer
|
|
ATU not able to support
|
|
requested configuration
|
|
|
|
9 protocolInitFailure ATUC failure during
|
|
initialization due to
|
|
incompatible protocol used by
|
|
the peer ATU.
|
|
|
|
10 noPeerAtuPresent ATUC failure during
|
|
initialization due to no
|
|
activation sequence detected
|
|
from peer ATU.
|
|
11 lossOfCellDelineation ATUC failure due
|
|
loss of Cell Delineation in interleaved
|
|
and non-interleaved mode.
|
|
|
|
This is intended to supplement ifOperStatus."
|
|
::= { adslAtucPhysEntry 4 }
|
|
|
|
adslAtucCurrOutputPwr OBJECT-TYPE
|
|
SYNTAX INTEGER (-310..310)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured total output power transmitted by this ATU.
|
|
This is the measurement that was reported during
|
|
the last activation sequence in tenth dB."
|
|
::= { adslAtucPhysEntry 5 }
|
|
|
|
adslAtucCurrAttainableRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum mandatoryly attainable data rate
|
|
by the ATU. This value will be equal or greater than
|
|
the mandatory line rate."
|
|
::= { adslAtucPhysEntry 6 }
|
|
|
|
adslAtucCurrSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (-640..640)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise Margin as seen by this ATU with respect to its
|
|
received signal in tenth dB."
|
|
::= { adslAtucPhysEntry 7 }
|
|
|
|
adslAtucCurrAtn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..630)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured difference between the total power transmitted by
|
|
the peer ATU and the total power received by this ATU
|
|
in tenth dB."
|
|
::= { adslAtucPhysEntry 8 }
|
|
|
|
adslAtucCurrPowercutback OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the powercutback by the ATU in tenth dB."
|
|
::= { adslAtucPhysEntry 9 }
|
|
|
|
adslAturPhysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR
|
|
Each row contains the Physical Layer Parameters
|
|
table for that ATUR. ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 3 }
|
|
|
|
adslAturPhysEntry OBJECT-TYPE
|
|
SYNTAX AdslAturPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the adslAturPhysTable."
|
|
INDEX { adslAturIfIndex }
|
|
::= { adslAturPhysTable 1 }
|
|
|
|
AdslAturPhysEntry ::= SEQUENCE {
|
|
adslAturIfIndex INTEGER,
|
|
adslAturInvSerialNumber DisplayString,
|
|
adslAturInvVendorID DisplayString,
|
|
adslAturInvVersionNumber DisplayString,
|
|
adslAturCurrSnrMgn INTEGER,
|
|
adslAturCurrAtn INTEGER,
|
|
adslAturCurrStatus INTEGER,
|
|
adslAturCurrOutputPwr INTEGER,
|
|
adslAturCurrAttainableRate INTEGER,
|
|
adslAturCurrPowercutback INTEGER
|
|
}
|
|
|
|
adslAturIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index."
|
|
::= { adslAturPhysEntry 1 }
|
|
|
|
adslAturInvSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific string that identifies the
|
|
vendor equipment."
|
|
::= { adslAturPhysEntry 2 }
|
|
|
|
adslAturInvVendorID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor ID code is a copy of the binary
|
|
vendor identification field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
-- REFERENCE
|
|
-- "ANSI T1.413"
|
|
::= { adslAturPhysEntry 3 }
|
|
|
|
adslAturInvVersionNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific version number sent by this ATU
|
|
as part of the initialization messages. It is a copy
|
|
of the binary version number field defined by the
|
|
PHY[10] and expressed as readable characters."
|
|
-- REFERENCE
|
|
-- "ANSI T1.413"
|
|
::= { adslAturPhysEntry 4 }
|
|
|
|
adslAturCurrSnrMgn OBJECT-TYPE
|
|
SYNTAX INTEGER (-640..640)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise Margin as seen by this ATU with respect to its
|
|
received signal in tenth dB."
|
|
::= { adslAturPhysEntry 5 }
|
|
|
|
adslAturCurrAtn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..630)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured difference between the total power transmitted by
|
|
the peer ATU and the total power received by this ATU
|
|
in tenth dB."
|
|
::= { adslAturPhysEntry 6 }
|
|
|
|
adslAturCurrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ noDefect(1),
|
|
lossOfFraming(2),
|
|
lossOfSignal(3),
|
|
lossOfPower(4),
|
|
lossOfSignalQuality(5),
|
|
lossOfCellDelineation(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates mandatory state of the ATUR line, i.e. the state
|
|
of the line as seen by ATUR.
|
|
This is a bit-map of possible conditions. Due to the isolation
|
|
of the ATUR when line problems occur, many state
|
|
conditions like loss of power, loss of quality signal,
|
|
and initialization errors, can not be determined.
|
|
While trouble shooting ATUR, also use object,
|
|
adslAtucCurrStatus. The various bit positions are:
|
|
|
|
1 noDefect There no defects on the line
|
|
|
|
2 lossOfFraming ATUR failure due to not
|
|
receiving valid frame
|
|
|
|
3 lossOfSignal ATUR failure due to not
|
|
receiving signal
|
|
|
|
4 lossOfPower ATUR failure due to loss of
|
|
power
|
|
|
|
5 lossOfSignalQuality Loss of Signal Quality is
|
|
declared when the Noise Margin
|
|
falls below the Minimum Noise
|
|
Margin, or the
|
|
bit-error-rate exceeds 10^-7.
|
|
|
|
6 lossOfCellDelineation ATUR failure due
|
|
loss of Cell Delineation in interleaved
|
|
and non-interleaved mode.
|
|
|
|
This is intended to supplement ifOperStatus."
|
|
::= { adslAturPhysEntry 7 }
|
|
|
|
adslAturCurrOutputPwr OBJECT-TYPE
|
|
SYNTAX INTEGER (-310..310)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured total output power transmitted by this ATU.
|
|
This is the measurement that was reported during
|
|
the last activation sequence in tenth dB."
|
|
::= { adslAturPhysEntry 8 }
|
|
|
|
adslAturCurrAttainableRate OBJECT-TYPE
|
|
SYNTAX INTEGER (32000..2560000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum mandatoryly attainable data rate
|
|
by the ATU. This value will be equal or greater than
|
|
the mandatory line rate."
|
|
::= { adslAturPhysEntry 9 }
|
|
|
|
adslAturCurrPowercutback OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the powercutback by the ATU in tenth dB."
|
|
::= { adslAturPhysEntry 10 }
|
|
|
|
adslAtucChanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC channel.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 4 }
|
|
|
|
adslAtucChanEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the adslAtucChanTable."
|
|
INDEX { adslAtucChanIfIndex }
|
|
::= { adslAtucChanTable 1 }
|
|
|
|
AdslAtucChanEntry ::= SEQUENCE {
|
|
adslAtucChanIfIndex INTEGER,
|
|
adslAtucChanInterleaveDelay INTEGER,
|
|
adslAtucChanCurrTxRate INTEGER,
|
|
adslAtucChanPrevTxRate INTEGER,
|
|
adslAtucChanInterleaveDepth INTEGER
|
|
}
|
|
|
|
adslAtucChanIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index."
|
|
::= { adslAtucChanEntry 1 }
|
|
|
|
adslAtucChanInterleaveDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the
|
|
interleave channel and defines the mapping
|
|
(relative spacing) between subsequent input
|
|
bytes at the interleaver input and their placement
|
|
in the bit stream at the interleaver output.
|
|
Larger numbers provide greater separation between
|
|
consecutive input bytes in the output bit stream
|
|
allowing for improved impulse noise immunity at
|
|
the expense of payload latency.
|
|
|
|
In the case where the ifType is Fast(125), use
|
|
noSuchObject."
|
|
::= { adslAtucChanEntry 2 }
|
|
|
|
adslAtucChanCurrTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual transmit rate on this channel."
|
|
::= { adslAtucChanEntry 3 }
|
|
|
|
adslAtucChanPrevTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate at the time of the last
|
|
adslAtucRateChangeTrap event. It is also set at
|
|
initialization to prevent a trap being sent.
|
|
|
|
Rate changes less than adslAtucThresh(*)RateDown
|
|
or less than adslAtucThresh(*)RateUp will not
|
|
cause a trap or cause this object to change.
|
|
(*) == Fast or Interleave.
|
|
See AdslLineAlarmConfProfileEntry."
|
|
::= { adslAtucChanEntry 4 }
|
|
|
|
adslAtucChanInterleaveDepth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interleaver depth."
|
|
::= { adslAtucChanEntry 5 }
|
|
|
|
adslAturChanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR channel.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 5 }
|
|
|
|
adslAturChanEntry OBJECT-TYPE
|
|
SYNTAX AdslAturChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the adslAturChanTable."
|
|
INDEX { adslAturChanIfIndex }
|
|
::= { adslAturChanTable 1 }
|
|
|
|
AdslAturChanEntry ::= SEQUENCE {
|
|
adslAturChanIfIndex INTEGER,
|
|
adslAturChanInterleaveDelay INTEGER,
|
|
adslAturChanCurrTxRate INTEGER,
|
|
adslAturChanPrevTxRate INTEGER,
|
|
adslAturChanCrcBlockLength INTEGER,
|
|
adslAturChanInterleaveDepth INTEGER
|
|
}
|
|
|
|
adslAturChanIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index."
|
|
::= { adslAturChanEntry 1 }
|
|
|
|
|
|
adslAturChanInterleaveDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the
|
|
interleave channel and defines the mapping
|
|
(relative spacing) between subsequent input
|
|
bytes at the interleaver input and their placement
|
|
in the bit stream at the interleaver output.
|
|
Larger numbers provide greater separation between
|
|
consecutive input bytes in the output bit stream
|
|
allowing for improved impulse noise immunity at
|
|
the expense of payload latency.
|
|
|
|
In the case where the ifType is Fast(125), use
|
|
noSuchObject."
|
|
::= { adslAturChanEntry 2 }
|
|
|
|
adslAturChanCurrTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual transmit rate on this channel."
|
|
::= { adslAturChanEntry 3 }
|
|
|
|
adslAturChanPrevTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate at the time of the last
|
|
adslAturRateChangeTrap event. It is also set at
|
|
initialization to prevent a trap being sent.
|
|
Rate changes less than adslAturThresh(*)RateDown
|
|
or less than adslAturThresh(*)RateUp will not
|
|
cause a trap or cause this object to change.
|
|
(*) == Fast or Interleave.
|
|
See AdslLineAlarmConfProfileEntry."
|
|
::= { adslAturChanEntry 4 }
|
|
|
|
adslAturChanCrcBlockLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the length of the channel data-block
|
|
on which the CRC operates. Refer to Line Code
|
|
Specific MIBs, [11] and [12] for more
|
|
information."
|
|
::= { adslAturChanEntry 5 }
|
|
|
|
adslAturChanInterleaveDepth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interleaver depth."
|
|
::= { adslAturChanEntry 6 }
|
|
|
|
|
|
adslAturPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR.
|
|
ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 7 }
|
|
|
|
adslAturPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AdslAturPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in adslAturPerfDataTable."
|
|
INDEX { adslAturPerfIfIndex }
|
|
::= { adslAturPerfDataTable 1 }
|
|
|
|
AdslAturPerfDataEntry ::= SEQUENCE {
|
|
adslAturPerfIfIndex INTEGER,
|
|
adslAturPerfLofs INTEGER,
|
|
adslAturPerfLoss INTEGER,
|
|
adslAturPerfLprs INTEGER,
|
|
adslAturPerfESs INTEGER,
|
|
adslAturPerfValidIntervals INTEGER,
|
|
adslAturPerfInvalidIntervals INTEGER,
|
|
adslAturPerfCurr15MinTimeElapsed INTEGER,
|
|
adslAturPerfCurr15MinLofs INTEGER,
|
|
adslAturPerfCurr15MinLoss INTEGER,
|
|
adslAturPerfCurr15MinLprs INTEGER,
|
|
adslAturPerfCurr15MinESs INTEGER,
|
|
adslAturPerfCurr1DayTimeElapsed INTEGER,
|
|
adslAturPerfCurr1DayLofs INTEGER,
|
|
adslAturPerfCurr1DayLoss INTEGER,
|
|
adslAturPerfCurr1DayLprs INTEGER,
|
|
adslAturPerfCurr1DayESs INTEGER,
|
|
adslAturPerfPrev1DayMoniSecs INTEGER,
|
|
adslAturPerfPrev1DayLofs INTEGER,
|
|
adslAturPerfPrev1DayLoss INTEGER,
|
|
adslAturPerfPrev1DayLprs INTEGER,
|
|
adslAturPerfPrev1DayESs INTEGER
|
|
}
|
|
|
|
adslAturPerfIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index."
|
|
::= { adslAturPerfDataEntry 1 }
|
|
|
|
adslAturPerfLofs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Framing failures since
|
|
agent reset."
|
|
::= { adslAturPerfDataEntry 2 }
|
|
|
|
adslAturPerfLoss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Signal failures since
|
|
agent reset."
|
|
::= { adslAturPerfDataEntry 3 }
|
|
|
|
adslAturPerfLprs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Power failures since
|
|
agent reset."
|
|
::= { adslAturPerfDataEntry 4 }
|
|
|
|
adslAturPerfESs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Errored Seconds since agent
|
|
reset. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAturPerfDataEntry 5 }
|
|
|
|
adslAturPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { adslAturPerfDataEntry 6 }
|
|
|
|
adslAturPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of adslAturPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { adslAturPerfDataEntry 7 }
|
|
|
|
adslAturPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { adslAturPerfDataEntry 8 }
|
|
|
|
adslAturPerfCurr15MinLofs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Framing."
|
|
::= { adslAturPerfDataEntry 9 }
|
|
|
|
adslAturPerfCurr15MinLoss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Signal."
|
|
::= { adslAturPerfDataEntry 10 }
|
|
|
|
adslAturPerfCurr15MinLprs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Power."
|
|
::= { adslAturPerfDataEntry 11 }
|
|
|
|
adslAturPerfCurr15MinESs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the mandatory 15 minute
|
|
interval. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAturPerfDataEntry 12 }
|
|
|
|
adslAturPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86399)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the mandatory 1-day interval."
|
|
::= { adslAturPerfDataEntry 13 }
|
|
|
|
adslAturPerfCurr1DayLofs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss
|
|
of Framing during the mandatory day as measured by
|
|
adslAturPerfCurr1DayTimeElapsed."
|
|
::= { adslAturPerfDataEntry 14 }
|
|
|
|
adslAturPerfCurr1DayLoss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss
|
|
of Signal during the mandatory day as measured by
|
|
adslAturPerfCurr1DayTimeElapsed."
|
|
::= { adslAturPerfDataEntry 15 }
|
|
|
|
adslAturPerfCurr1DayLprs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss
|
|
of Power during the mandatory day as measured by
|
|
adslAturPerfCurr1DayTimeElapsed."
|
|
::= { adslAturPerfDataEntry 16 }
|
|
|
|
adslAturPerfCurr1DayESs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds during the mandatory day as
|
|
measured by adslAturPerfCurr1DayTimeElapsed.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAturPerfDataEntry 17 }
|
|
|
|
adslAturPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86400)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { adslAturPerfDataEntry 18 }
|
|
|
|
adslAturPerfPrev1DayLofs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Framing within the most recent previous
|
|
1-day period."
|
|
::= { adslAturPerfDataEntry 19 }
|
|
|
|
adslAturPerfPrev1DayLoss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Signal within the most recent previous
|
|
1-day period."
|
|
::= { adslAturPerfDataEntry 20 }
|
|
|
|
adslAturPerfPrev1DayLprs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Power within the most recent previous
|
|
1-day period."
|
|
::= { adslAturPerfDataEntry 21 }
|
|
|
|
adslAturPerfPrev1DayESs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds within the most recent
|
|
previous 1-day period. The errored second parameter is
|
|
a count of one-second intervals containing one or more
|
|
crc anomalies, or one or more los or sef defects."
|
|
::= { adslAturPerfDataEntry 22 }
|
|
|
|
|
|
adslAturChanPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAturChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR channel.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 11 }
|
|
|
|
adslAturChanPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AdslAturChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in adslAturChanPerfDataTable."
|
|
INDEX { adslAturChanPerfIfIndex }
|
|
::= { adslAturChanPerfDataTable 1 }
|
|
|
|
AdslAturChanPerfDataEntry ::= SEQUENCE {
|
|
adslAturChanPerfIfIndex INTEGER,
|
|
adslAturChanReceivedBlks INTEGER,
|
|
adslAturChanTransmittedBlks INTEGER,
|
|
adslAturChanCorrectedBlks INTEGER,
|
|
adslAturChanUncorrectBlks INTEGER,
|
|
adslAturChanPerfValidIntervals INTEGER,
|
|
adslAturChanPerfInvalidIntervals INTEGER,
|
|
adslAturChanPerfCurr15MinTimeElapsed INTEGER,
|
|
adslAturChanPerfCurr15MinReceivedBlks INTEGER,
|
|
adslAturChanPerfCurr15MinTransmittedBlks INTEGER,
|
|
adslAturChanPerfCurr15MinCorrectedBlks INTEGER,
|
|
adslAturChanPerfCurr15MinUncorrectBlks INTEGER,
|
|
adslAturChanPerfCurr1DayTimeElapsed INTEGER,
|
|
adslAturChanPerfCurr1DayReceivedBlks INTEGER,
|
|
adslAturChanPerfCurr1DayTransmittedBlks INTEGER,
|
|
adslAturChanPerfCurr1DayCorrectedBlks INTEGER,
|
|
adslAturChanPerfCurr1DayUncorrectBlks INTEGER,
|
|
adslAturChanPerfPrev1DayMoniSecs INTEGER,
|
|
adslAturChanPerfPrev1DayReceivedBlks INTEGER,
|
|
adslAturChanPerfPrev1DayTransmittedBlks INTEGER,
|
|
adslAturChanPerfPrev1DayCorrectedBlks INTEGER,
|
|
adslAturChanPerfPrev1DayUncorrectBlks INTEGER
|
|
}
|
|
|
|
adslAturChanPerfIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index."
|
|
::= { adslAturChanPerfDataEntry 1 }
|
|
|
|
adslAturChanReceivedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this channel
|
|
since agent reset."
|
|
::= { adslAturChanPerfDataEntry 2 }
|
|
|
|
adslAturChanTransmittedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel since agent reset."
|
|
::= { adslAturChanPerfDataEntry 3 }
|
|
|
|
adslAturChanCorrectedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected since agent reset. These blocks are passed
|
|
on as good data."
|
|
::= { adslAturChanPerfDataEntry 4 }
|
|
|
|
adslAturChanUncorrectBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors since agent reset."
|
|
::= { adslAturChanPerfDataEntry 5 }
|
|
|
|
adslAturChanPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { adslAturChanPerfDataEntry 6 }
|
|
|
|
adslAturChanPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of adslAturChanPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { adslAturChanPerfDataEntry 7 }
|
|
|
|
adslAturChanPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval.
|
|
A full interval is 900 seconds."
|
|
::= { adslAturChanPerfDataEntry 8 }
|
|
|
|
adslAturChanPerfCurr15MinReceivedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel within the mandatory 15 minute interval."
|
|
::= { adslAturChanPerfDataEntry 9 }
|
|
|
|
adslAturChanPerfCurr15MinTransmittedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel within the mandatory 15 minute interval."
|
|
::= { adslAturChanPerfDataEntry 10 }
|
|
|
|
adslAturChanPerfCurr15MinCorrectedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel within the mandatory 15 minute
|
|
interval."
|
|
::= { adslAturChanPerfDataEntry 11 }
|
|
|
|
adslAturChanPerfCurr15MinUncorrectBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel within the mandatory 15 minute
|
|
interval."
|
|
::= { adslAturChanPerfDataEntry 12 }
|
|
|
|
adslAturChanPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86399)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the mandatory 1-day interval."
|
|
::= { adslAturChanPerfDataEntry 13 }
|
|
|
|
adslAturChanPerfCurr1DayReceivedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel during the mandatory day as measured by
|
|
adslAturChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAturChanPerfDataEntry 14 }
|
|
|
|
adslAturChanPerfCurr1DayTransmittedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel during the mandatory day as measured by
|
|
adslAturChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAturChanPerfDataEntry 15 }
|
|
|
|
adslAturChanPerfCurr1DayCorrectedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel during the mandatory day as
|
|
measured by adslAturChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAturChanPerfDataEntry 16 }
|
|
|
|
adslAturChanPerfCurr1DayUncorrectBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel during the mandatory day as
|
|
measured by adslAturChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAturChanPerfDataEntry 17 }
|
|
|
|
adslAturChanPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86400)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { adslAturChanPerfDataEntry 18 }
|
|
|
|
adslAturChanPerfPrev1DayReceivedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel within the most recent previous 1-day
|
|
period."
|
|
::= { adslAturChanPerfDataEntry 19 }
|
|
|
|
adslAturChanPerfPrev1DayTransmittedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel within the most recent previous 1-day
|
|
period."
|
|
::= { adslAturChanPerfDataEntry 20 }
|
|
|
|
adslAturChanPerfPrev1DayCorrectedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel within the most recent
|
|
previous 1-day period."
|
|
::= { adslAturChanPerfDataEntry 21 }
|
|
|
|
adslAturChanPerfPrev1DayUncorrectBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel within the most recent previous
|
|
1-day period."
|
|
::= { adslAturChanPerfDataEntry 22 }
|
|
|
|
---
|
|
--- ADSL ATUC Performance Data Table
|
|
---
|
|
|
|
adslAtucPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUC.
|
|
ADSL physical interfaces are
|
|
those ifEntries where ifType is equal to adsl(94)."
|
|
::= { adslMibObjects 12 }
|
|
|
|
adslAtucPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in adslAtucPerfDataTable."
|
|
INDEX { adslAtucPerfIfIndex }
|
|
::= { adslAtucPerfDataTable 1 }
|
|
|
|
AdslAtucPerfDataEntry ::= SEQUENCE {
|
|
adslAtucPerfIfIndex INTEGER,
|
|
adslAtucPerfLofs INTEGER,
|
|
adslAtucPerfLoss INTEGER,
|
|
adslAtucPerfLprs INTEGER,
|
|
adslAtucPerfESs INTEGER,
|
|
adslAtucPerfValidIntervals INTEGER,
|
|
adslAtucPerfInvalidIntervals INTEGER,
|
|
adslAtucPerfCurr15MinTimeElapsed INTEGER,
|
|
adslAtucPerfCurr15MinLofs INTEGER,
|
|
adslAtucPerfCurr15MinLoss INTEGER,
|
|
adslAtucPerfCurr15MinLprs INTEGER,
|
|
adslAtucPerfCurr15MinESs INTEGER,
|
|
adslAtucPerfCurr1DayTimeElapsed INTEGER,
|
|
adslAtucPerfCurr1DayLofs INTEGER,
|
|
adslAtucPerfCurr1DayLoss INTEGER,
|
|
adslAtucPerfCurr1DayLprs INTEGER,
|
|
adslAtucPerfCurr1DayESs INTEGER,
|
|
adslAtucPerfPrev1DayMoniSecs INTEGER,
|
|
adslAtucPerfPrev1DayLofs INTEGER,
|
|
adslAtucPerfPrev1DayLoss INTEGER,
|
|
adslAtucPerfPrev1DayLprs INTEGER,
|
|
adslAtucPerfPrev1DayESs INTEGER
|
|
}
|
|
|
|
adslAtucPerfIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index."
|
|
::= { adslAtucPerfDataEntry 1 }
|
|
|
|
adslAtucPerfLofs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Framing failures since
|
|
agent reset."
|
|
::= { adslAtucPerfDataEntry 2 }
|
|
|
|
adslAtucPerfLoss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Signal failures since
|
|
agent reset."
|
|
::= { adslAtucPerfDataEntry 3 }
|
|
|
|
adslAtucPerfLprs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Loss of Power failures since
|
|
agent reset."
|
|
::= { adslAtucPerfDataEntry 4 }
|
|
|
|
adslAtucPerfESs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of Errored Seconds since agent
|
|
reset. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAtucPerfDataEntry 5 }
|
|
|
|
adslAtucPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { adslAtucPerfDataEntry 6 }
|
|
|
|
adslAtucPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of adslAtucPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { adslAtucPerfDataEntry 7 }
|
|
|
|
adslAtucPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { adslAtucPerfDataEntry 8 }
|
|
|
|
adslAtucPerfCurr15MinLofs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Framing."
|
|
::= { adslAtucPerfDataEntry 9 }
|
|
|
|
adslAtucPerfCurr15MinLoss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Signal."
|
|
::= { adslAtucPerfDataEntry 10 }
|
|
|
|
adslAtucPerfCurr15MinLprs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the mandatory 15 minute interval
|
|
when there was Loss of Power."
|
|
::= { adslAtucPerfDataEntry 11 }
|
|
|
|
adslAtucPerfCurr15MinESs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds in the mandatory 15 minute
|
|
interval. The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAtucPerfDataEntry 12 }
|
|
|
|
adslAtucPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86399)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the mandatory 1-day interval."
|
|
::= { adslAtucPerfDataEntry 13 }
|
|
|
|
adslAtucPerfCurr1DayLofs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss
|
|
of Framing during the mandatory day as measured by
|
|
adslAtucPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucPerfDataEntry 14 }
|
|
|
|
adslAtucPerfCurr1DayLoss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss
|
|
of Signal during the mandatory day as measured by
|
|
adslAtucPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucPerfDataEntry 15 }
|
|
|
|
adslAtucPerfCurr1DayLprs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the number of seconds when there was Loss
|
|
of Power during the mandatory day as measured by
|
|
adslAtucPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucPerfDataEntry 16 }
|
|
|
|
adslAtucPerfCurr1DayESs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds during the mandatory day as
|
|
measured by adslAtucPerfCurr1DayTimeElapsed.
|
|
The errored second parameter is a count of
|
|
one-second intervals containing one or more crc
|
|
anomalies, or one or more los or sef defects."
|
|
::= { adslAtucPerfDataEntry 17 }
|
|
|
|
adslAtucPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86400)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { adslAtucPerfDataEntry 18 }
|
|
|
|
adslAtucPerfPrev1DayLofs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Framing within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucPerfDataEntry 19 }
|
|
|
|
adslAtucPerfPrev1DayLoss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Signal within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucPerfDataEntry 20 }
|
|
|
|
adslAtucPerfPrev1DayLprs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was
|
|
Loss of Power within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucPerfDataEntry 21 }
|
|
|
|
adslAtucPerfPrev1DayESs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds within the most recent
|
|
previous 1-day period. The errored second parameter is
|
|
a count of one-second intervals containing one or more
|
|
crc anomalies, or one or more los or sef defects."
|
|
::= { adslAtucPerfDataEntry 22 }
|
|
|
|
|
|
---
|
|
--- ADSL ATUC Channel Performance Data Table
|
|
---
|
|
|
|
adslAtucChanPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdslAtucChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each ATUR channel.
|
|
ADSL channel interfaces are those ifEntries
|
|
where ifType is equal to adslInterleave(124)
|
|
or adslFast(125)."
|
|
::= { adslMibObjects 13 }
|
|
|
|
adslAtucChanPerfDataEntry OBJECT-TYPE
|
|
SYNTAX AdslAtucChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in adslAtucChanPerfDataTable."
|
|
INDEX { adslAtucChanPerfIfIndex }
|
|
::= { adslAtucChanPerfDataTable 1 }
|
|
|
|
AdslAtucChanPerfDataEntry ::= SEQUENCE {
|
|
adslAtucChanPerfIfIndex INTEGER,
|
|
adslAtucChanReceivedBlks INTEGER,
|
|
adslAtucChanTransmittedBlks INTEGER,
|
|
adslAtucChanCorrectedBlks INTEGER,
|
|
adslAtucChanUncorrectBlks INTEGER,
|
|
adslAtucChanPerfValidIntervals INTEGER,
|
|
adslAtucChanPerfInvalidIntervals INTEGER,
|
|
adslAtucChanPerfCurr15MinTimeElapsed INTEGER,
|
|
adslAtucChanPerfCurr15MinReceivedBlks INTEGER,
|
|
adslAtucChanPerfCurr15MinTransmittedBlks INTEGER,
|
|
adslAtucChanPerfCurr15MinCorrectedBlks INTEGER,
|
|
adslAtucChanPerfCurr15MinUncorrectBlks INTEGER,
|
|
adslAtucChanPerfCurr1DayTimeElapsed INTEGER,
|
|
adslAtucChanPerfCurr1DayReceivedBlks INTEGER,
|
|
adslAtucChanPerfCurr1DayTransmittedBlks INTEGER,
|
|
adslAtucChanPerfCurr1DayCorrectedBlks INTEGER,
|
|
adslAtucChanPerfCurr1DayUncorrectBlks INTEGER,
|
|
adslAtucChanPerfPrev1DayMoniSecs INTEGER,
|
|
adslAtucChanPerfPrev1DayReceivedBlks INTEGER,
|
|
adslAtucChanPerfPrev1DayTransmittedBlks INTEGER,
|
|
adslAtucChanPerfPrev1DayCorrectedBlks INTEGER,
|
|
adslAtucChanPerfPrev1DayUncorrectBlks INTEGER
|
|
}
|
|
|
|
adslAtucChanPerfIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the ADSL interface index."
|
|
::= { adslAtucChanPerfDataEntry 1 }
|
|
|
|
adslAtucChanReceivedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this channel
|
|
since agent reset."
|
|
::= { adslAtucChanPerfDataEntry 2 }
|
|
|
|
adslAtucChanTransmittedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel since agent reset."
|
|
::= { adslAtucChanPerfDataEntry 3 }
|
|
|
|
adslAtucChanCorrectedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected since agent reset. These blocks are passed
|
|
on as good data."
|
|
::= { adslAtucChanPerfDataEntry 4 }
|
|
|
|
adslAtucChanUncorrectBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors since agent reset."
|
|
::= { adslAtucChanPerfDataEntry 5 }
|
|
|
|
adslAtucChanPerfValidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals in the
|
|
interval table for which data was collected. Given
|
|
that <n> is the maximum # of intervals supported.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available."
|
|
::= { adslAtucChanPerfDataEntry 6 }
|
|
|
|
adslAtucChanPerfInvalidIntervals OBJECT-TYPE
|
|
SYNTAX INTEGER (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to the value of adslAtucChanPerfValidIntervals
|
|
for which no data is available. This object
|
|
will typically be zero except in cases where
|
|
the data for some intervals are not available
|
|
(e.g., in proxy situations)."
|
|
::= { adslAtucChanPerfDataEntry 7 }
|
|
|
|
adslAtucChanPerfCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..899)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval.
|
|
A full interval is 900 seconds."
|
|
::= { adslAtucChanPerfDataEntry 8 }
|
|
|
|
adslAtucChanPerfCurr15MinReceivedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel within the mandatory 15 minute interval."
|
|
::= { adslAtucChanPerfDataEntry 9 }
|
|
|
|
adslAtucChanPerfCurr15MinTransmittedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel within the mandatory 15 minute interval."
|
|
::= { adslAtucChanPerfDataEntry 10 }
|
|
|
|
adslAtucChanPerfCurr15MinCorrectedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel within the mandatory 15 minute
|
|
interval."
|
|
::= { adslAtucChanPerfDataEntry 11 }
|
|
|
|
adslAtucChanPerfCurr15MinUncorrectBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel within the mandatory 15 minute
|
|
interval."
|
|
::= { adslAtucChanPerfDataEntry 12 }
|
|
|
|
adslAtucChanPerfCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86399)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the
|
|
beginning of the mandatory 1-day interval."
|
|
::= { adslAtucChanPerfDataEntry 13 }
|
|
|
|
adslAtucChanPerfCurr1DayReceivedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel during the mandatory day as measured by
|
|
adslAtucChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucChanPerfDataEntry 14 }
|
|
|
|
adslAtucChanPerfCurr1DayTransmittedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel during the mandatory day as measured by
|
|
adslAtucChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucChanPerfDataEntry 15 }
|
|
|
|
adslAtucChanPerfCurr1DayCorrectedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel during the mandatory day as
|
|
measured by adslAtucChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucChanPerfDataEntry 16 }
|
|
|
|
adslAtucChanPerfCurr1DayUncorrectBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel during the mandatory day as
|
|
measured by adslAtucChanPerfCurr1DayTimeElapsed."
|
|
::= { adslAtucChanPerfDataEntry 17 }
|
|
|
|
adslAtucChanPerfPrev1DayMoniSecs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86400)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the previous 1-day interval
|
|
over which the performance monitoring information
|
|
is actually counted. This value will be the same as
|
|
the interval duration except in a situation where
|
|
performance monitoring data could not be collected
|
|
for any reason."
|
|
::= { adslAtucChanPerfDataEntry 18 }
|
|
|
|
adslAtucChanPerfPrev1DayReceivedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks received on this
|
|
channel within the most recent previous 1-day
|
|
period."
|
|
::= { adslAtucChanPerfDataEntry 19 }
|
|
|
|
adslAtucChanPerfPrev1DayTransmittedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all encoded blocks transmitted on this
|
|
channel within the most recent previous 1-day
|
|
period."
|
|
::= { adslAtucChanPerfDataEntry 20 }
|
|
|
|
adslAtucChanPerfPrev1DayCorrectedBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with errors that were
|
|
corrected on this channel within the most recent
|
|
previous 1-day period."
|
|
::= { adslAtucChanPerfDataEntry 21 }
|
|
|
|
adslAtucChanPerfPrev1DayUncorrectBlks OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of all blocks received with uncorrectable
|
|
errors on this channel within the most recent previous
|
|
1-day period."
|
|
::= { adslAtucChanPerfDataEntry 22 }
|
|
|
|
END
|