320 lines
11 KiB
Plaintext
320 lines
11 KiB
Plaintext
--
|
|
--defines ROOMALERT12S-MIB for SNMP agent extension of Room Alert 12S
|
|
--Contents: Global Registration Module
|
|
-- Room Alert OIDs - Enterprise 20916
|
|
--Version: 1.0.0
|
|
--Date: 22 November 2019
|
|
--Developed By: AVTECH Software, Inc.
|
|
|
|
--
|
|
--Copyright (c) 2019 AVTECH Software, Inc.
|
|
--
|
|
|
|
ROOMALERT12S-MIB DEFINITIONS ::= BEGIN
|
|
|
|
|
|
IMPORTS
|
|
enterprises
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
|
|
avtech OBJECT IDENTIFIER ::= { enterprises 20916 }
|
|
products OBJECT IDENTIFIER ::= { avtech 1 }
|
|
roomalert12S OBJECT IDENTIFIER ::= { products 12 }
|
|
sensors OBJECT IDENTIFIER ::= { roomalert12S 1 }
|
|
internal OBJECT IDENTIFIER ::= { sensors 1 }
|
|
digital OBJECT IDENTIFIER ::= { sensors 2 }
|
|
switch OBJECT IDENTIFIER ::= { sensors 3 }
|
|
|
|
temperature OBJECT IDENTIFIER ::= { internal 1 }
|
|
analog OBJECT IDENTIFIER ::= { internal 2 }
|
|
relay OBJECT IDENTIFIER ::= { internal 3 }
|
|
|
|
digital-sen1 OBJECT IDENTIFIER ::= { digital 1 }
|
|
digital-sen2 OBJECT IDENTIFIER ::= { digital 2 }
|
|
digital-sen3 OBJECT IDENTIFIER ::= { digital 3 }
|
|
|
|
traps OBJECT IDENTIFIER ::= { roomalert12S 2 }
|
|
externalrelays OBJECT IDENTIFIER ::= { roomalert12S 3 }
|
|
externalrelay1 OBJECT IDENTIFIER ::= { externalrelays 1 }
|
|
|
|
-- Room Alert 12S MIB
|
|
-- Parameters
|
|
|
|
|
|
internal-tempf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The internal temperature reading in Fahrenheit."
|
|
::= { temperature 1 }
|
|
|
|
internal-tempc OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The internal temperature reading in Celsius."
|
|
::= { temperature 2 }
|
|
|
|
internal-analog1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current status of the Room Alert 12S analog input (0-5VDC)."
|
|
::= { analog 1 }
|
|
|
|
internal-relay1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the on-board relay output"
|
|
::= { relay 1 }
|
|
|
|
digital-sen1-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, Temp/Active Power, or Digital Extreme Temperature sensor, this value represents the current temperature in Celsius."
|
|
::= { digital-sen1 1 }
|
|
|
|
digital-sen1-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, Temp/Active Power, or Digital Extreme Temperature sensor, this value represents the current temperature in Fahrenheit."
|
|
::= { digital-sen1 2 }
|
|
|
|
digital-sen1-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). If this is a Digital Extreme Temperature sensor, this value represents the current temperature from the thermocouple in Celsius."
|
|
::= { digital-sen1 3 }
|
|
|
|
digital-sen1-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. If this is a Digital Extreme Temperature sensor, this value represents the current temperature from the thermocouple in Fahrenheit."
|
|
::= { digital-sen1 4 }
|
|
|
|
digital-sen1-5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. If this is a Digital Extreme Temperature Sensor, this value is a fault code. 0 = no fault."
|
|
::= { digital-sen1 5 }
|
|
|
|
|
|
digital-sen1-6 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Celsius."
|
|
::= { digital-sen1 6 }
|
|
|
|
digital-sen1-7 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Fahrenheit."
|
|
::= { digital-sen1 7 }
|
|
|
|
digital-sen2-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, Temp/Active Power, or Digital Extreme Temperature sensor, this value represents the current temperature in Celsius."
|
|
::= { digital-sen2 1 }
|
|
|
|
digital-sen2-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, Temp/Active Power, or Digital Extreme Temperature sensor, this value represents the current temperature in Fahrenheit."
|
|
::= { digital-sen2 2 }
|
|
|
|
digital-sen2-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). If this is a Digital Extreme Temperature sensor, this value represents the current temperature from the thermocouple in Celsius."
|
|
::= { digital-sen2 3 }
|
|
|
|
digital-sen2-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. If this is a Digital Extreme Temperature sensor, this value represents the current temperature from the thermocouple in Fahrenheit."
|
|
::= { digital-sen2 4 }
|
|
|
|
digital-sen2-5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. If this is a Digital Extreme Temperature Sensor, this value is a fault code. 0 = no fault."
|
|
::= { digital-sen2 5 }
|
|
|
|
|
|
digital-sen2-6 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Celsius."
|
|
::= { digital-sen2 6 }
|
|
|
|
digital-sen2-7 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Fahrenheit."
|
|
::= { digital-sen2 7 }
|
|
|
|
digital-sen3-1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, Temp/Active Power, or Digital Extreme Temperature sensor, this value represents the current temperature in Celsius."
|
|
::= { digital-sen3 1 }
|
|
|
|
digital-sen3-2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, Temp/Active Power, or Digital Extreme Temperature sensor, this value represents the current temperature in Fahrenheit."
|
|
::= { digital-sen3 2 }
|
|
|
|
digital-sen3-3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). If this is a Digital Extreme Temperature sensor, this value represents the current temperature from the thermocouple in Celsius."
|
|
::= { digital-sen3 3 }
|
|
|
|
digital-sen3-4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. If this is a Digital Extreme Temperature sensor, this value represents the current temperature from the thermocouple in Fahrenheit."
|
|
::= { digital-sen3 4 }
|
|
|
|
digital-sen3-5 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. If this is a Digital Extreme Temperature Sensor, this value is a fault code. 0 = no fault."
|
|
::= { digital-sen3 5 }
|
|
|
|
|
|
digital-sen3-6 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Celsius."
|
|
::= { digital-sen3 6 }
|
|
|
|
digital-sen3-7 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Fahrenheit."
|
|
::= { digital-sen3 7 }
|
|
|
|
switch-sen1 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 1 }
|
|
|
|
switch-sen2 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 2 }
|
|
|
|
switch-sen3 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 3 }
|
|
|
|
switch-sen4 OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED)."
|
|
::= { switch 4 }
|
|
|
|
alarmmessage OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Last Alarm Message"
|
|
::= { traps 1 }
|
|
|
|
|
|
-- externalrelay1
|
|
|
|
externalrelay1-element-one OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the first element on external relay 1."
|
|
::= { externalrelay1 1 }
|
|
|
|
externalrelay1-element-two OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the second element on external relay 1."
|
|
::= { externalrelay1 2 }
|
|
|
|
externalrelay1-element-three OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the third element on external relay 1."
|
|
::= { externalrelay1 3 }
|
|
|
|
externalrelay1-element-four OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the fourth element on external relay 1."
|
|
::= { externalrelay1 4 }
|
|
|
|
externalrelay1-element-five OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the fifth element on external relay 1."
|
|
::= { externalrelay1 5 }
|
|
|
|
externalrelay1-element-six OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the sixth element on external relay 1."
|
|
::= { externalrelay1 6 }
|
|
|
|
externalrelay1-element-seven OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the seventh element on external relay 1."
|
|
::= { externalrelay1 7 }
|
|
|
|
externalrelay1-element-eight OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the eighth element on external relay 1"
|
|
::= { externalrelay1 8 }
|
|
|
|
END
|