WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/avaya/AVAYA-SURV-MIB

2434 lines
69 KiB
Plaintext
Raw Blame History

AVAYA-SURV-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
Integer32, Unsigned32, enterprises, Gauge32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION, TruthValue, DateAndTime, TimeInterval, DisplayString
FROM SNMPv2-TC
InetAddressType, InetAddress, InetPortNumber, InetAddressIPv6
FROM INET-ADDRESS-MIB
IpAddress
FROM RFC1155-SMI
avGatewayMibs
FROM AVAYAGEN-MIB;
avSurvMib MODULE-IDENTITY
LAST-UPDATED "200810221615Z"
ORGANIZATION
"Avaya"
CONTACT-INFO
"
Avaya Customer Services
Postal: Avaya, Inc.
211 Mt Airy Rd.
Basking Ridge, NJ 07920
USA
Tel: +1 908 953 6000
E-mail: executiveoffic@avaya.com
WWW: http://www.avaya.com
"
DESCRIPTION
"
R4.1 Standard Local Survivability (SLS) MIB
This module defines an interface to Survivability mode
of operation.This allows a gateway to have a basic set
of call features if it loses communication with a main
call controller (CC).
When the gateway is in survivabilty mode of operation,
it will continue to register to H.248 controller IP
addresses in the MGC list. If a re-registration to the
H.248 controller can be made, the survivability mode will
be disabled and any new calls will be managed by the MGC.
Active calls between two local IP phones will be maintained
because they are established as shuffled calls.
Copyright notice:
This AVAYA SNMP Management Information Base Specification
(Specification)embodies AVAYA confidential and Proprietary
intellectual property. AVAYA retains all Title and ownership
in the Specification, including any revisions.
It is AVAYA's intent to encourage the widespread use of this
Specification in connection with the management of AVAYA
products. AVAYA grants vendors, end-users, and other
interested parties non-exclusive license to use this
Specification in connection with the management of AVAYA
products.
This Specification is supplied 'as is', and AVAYA makes no
warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification.
avSurvMib
|
+ .0 avSurvNotification
|
+ .1 avSurvConfig
|
+ .2 avSurvStationTable
| (index: avSurvStationIndex)
|
+ .3 avSurvTrunkGroupTable
| (index: avSurvTrunkGroupNum)
|
+ .4 avSurvTrunkTable
| (indexes: avSurvTrunkRefNumber,
| avSurvTrunkIndex)
|
+ .5 avSurvArsTable
| (index: avSurvDialIndex)
|
+ .6 avSurvFacTable
| (index: avSurvFacIndex)
|
+ .7 avSurvIpVoiceCodecSetTable
| (indexes: avSurvIpVoiceCodecSetNum,)
| avSurvIpVoiceCodecSetIndex)
|
+ .8 avSurvIpCodecSetConfig
|
|
+ .9 avSurvSlotConfigTable
| (index: avSurvSlotConfigIndex)
|
+ .10 avSurvDs1Table
| (index: avSurvDs1Index)
|
+ .11 avSurvSigGroupTable
| (index: avSurvSigGroupIndex)
|
+ .12 avSurvBriTable
| (index: avSurvBriIndex)
|
+ .13 avSurvIncomingRoutingTable
| (indexes: avSurvIncomingRoutingGroupRefNumber,
| avSurvIncomingRoutingIndex)
|
+ .14 avSurvNfasTable
| (indexes: avSurvNfasSigGroupRefNumber,
| avSurvNfasIndex)
|
+ .15 Add G430 values for avSurvMaxIPReg and avSurvBriIndex.
| Change avSurvBriIndex to be 1..64 instead of 1..24.
"
::= { avGatewayMibs 4 }
-- 1.3.6.1.4.1.6889.2.6.4.0
avSurvNotification OBJECT IDENTIFIER ::= { avSurvMib 0 }
-- 1.3.6.1.4.1.6889.2.6.4.0.1
avSurvEnabled NOTIFICATION-TYPE
OBJECTS { avSurvNotificationSeverity }
STATUS current
DESCRIPTION
"This trap indicates that survivability.o has been administratively enabled."
::= { avSurvNotification 1 }
-- 1.3.6.1.4.1.6889.2.6.4.0.2
avSurvDisabled NOTIFICATION-TYPE
OBJECTS { avSurvNotificationSeverity }
STATUS current
DESCRIPTION
"This trap indicates that survivability.o has been administratively disabled."
::= { avSurvNotification 2 }
-- 1.3.6.1.4.1.6889.2.6.4.0.3
avSurvActive NOTIFICATION-TYPE
OBJECTS { avSurvNotificationSeverity }
STATUS current
DESCRIPTION
"This trap indicates that survivability.o is now the call controller of record
and is processing calls."
::= { avSurvNotification 3 }
-- 1.3.6.1.4.1.6889.2.6.4.0.4
avSurvInactive NOTIFICATION-TYPE
OBJECTS { avSurvNotificationSeverity }
STATUS current
DESCRIPTION
"This trap indicates that survivability.o has stopped processing calls.
A more powerful controller may have taken over, either an LSP or a primary call controller."
::= { avSurvNotification 4 }
-- 1.3.6.1.4.1.6889.2.6.4.1
avSurvConfig OBJECT IDENTIFIER ::= { avSurvMib 1 }
-- 1.3.6.1.4.1.6889.2.6.4.1.1
avSurvAdminState OBJECT-TYPE
SYNTAX INTEGER
{
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows craft or PIM to enable the SLS call engine or read its current state"
::= { avSurvConfig 1 }
-- 1.3.6.1.4.1.6889.2.6.4.1.2
avSurvStatus OBJECT-TYPE
SYNTAX INTEGER
{
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current operational status of SLS call engine"
::= { avSurvConfig 2 }
-- 1.3.6.1.4.1.6889.2.6.4.1.3
avSurvMaxIPReg OBJECT-TYPE
SYNTAX Integer32 (1..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum IP phone registrations allowed.
Gateway SLS firmware will restrict per model.
G250 R3.0 = 10;
G250 R3.1 and R4.0 = 12; G350 R4.0 = 72;
IG550 [Juniper gateways(4350, 6350) R4.0 = 100;
IG550 [Juniper gateways(2320, 2350) R4.1 = 100;
G450 R4.1 =240
G430 = 150"
::= { avSurvConfig 3 }
-- 1.3.6.1.4.1.6889.2.6.4.1.4
avSurvDateFormat OBJECT-TYPE
SYNTAX INTEGER
{
mmDdYy (1),
ddMmYy (2),
yyMmDd (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Date Format. This is used for calendar/clock display on DCP & IP phones"
::= { avSurvConfig 4 }
-- 1.3.6.1.4.1.6889.2.6.4.1.5
avSurvEndDLTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Date/Timestamp of last download from PIM. This is written by PIM after it
completes initialization of all configuration parameters"
::= { avSurvConfig 5 }
-- 1.3.6.1.4.1.6889.2.6.4.1.6
avSurvNotificationSeverity OBJECT-TYPE
SYNTAX INTEGER
{
cleared (1),
indeterminate (2),
critical (3),
major (4),
minor (5),
warning (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severity of last sent trap"
::= { avSurvConfig 6 }
-- 1.3.6.1.4.1.6889.2.6.4.1.7
avSurvConfigCommand OBJECT-TYPE
SYNTAX INTEGER
{
clear (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear Running Configuration Command, write only"
::= { avSurvConfig 7 }
-- 1.3.6.1.4.1.6889.2.6.4.1.8
avSurvGatewayNumber OBJECT-TYPE
SYNTAX Integer32 (1..250)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gateway Identification Number (see CM Media Gateway form)"
::= { avSurvConfig 8 }
-- 1.3.6.1.4.1.6889.2.6.4.1.9
avSurvPimLockout OBJECT-TYPE
SYNTAX INTEGER
{
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows Craft to prevent PIM updates from being downloaded during local diagnostic session"
::= { avSurvConfig 9 }
-- 1.3.6.1.4.1.6889.2.6.4.1.10
avSurvAttendantAccessCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows a station in the branch office to be able
to directly dial an attendant position"
::= { avSurvConfig 10 }
-- 1.3.6.1.4.1.6889.2.6.4.1.11
avSurvAttendantExtension OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..13))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the station which shall serve as the branch office attendant position.
Used as destination to direct un-routable incoming trunk calls."
::= { avSurvConfig 11 }
-- 1.3.6.1.4.1.6889.2.6.4.2
avSurvStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Table"
::= { avSurvMib 2 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1
avSurvStationEntry OBJECT-TYPE
SYNTAX AvSurvStationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains index, extension number, type, interface bit map, COR, trunk-destination status, expansion-module, slot/port, switchhook-flash, IP address of registered station, and station name"
INDEX {
avSurvStationIndex
}
::= { avSurvStationTable 1 }
AvSurvStationEntry ::= SEQUENCE {
avSurvStationIndex Integer32,
avSurvStationExt DisplayString,
avSurvStationType INTEGER,
avSurvStationInterfaceIndex Integer32,
avSurvStationCOR INTEGER,
avSurvStationTrunkDest TruthValue,
avSurvStationRowStatus RowStatus,
avSurvStationExpansionModule TruthValue,
avSurvStationSlotPort DisplayString,
avSurvStationSwitchHookFlash TruthValue,
avSurvStationIpAddressRegistered OCTET STRING,
avSurvStationName DisplayString
}
-- 1.3.6.1.4.1.6889.2.6.4.2.1.1
avSurvStationIndex OBJECT-TYPE
SYNTAX Integer32 (1..340)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Station Table Index"
::= { avSurvStationEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.2
avSurvStationExt OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..13))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Station Extension number"
::= { avSurvStationEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.3
avSurvStationType OBJECT-TYPE
SYNTAX INTEGER
{
ip4601 (1),
ip4602 (2),
ip4602Sw (3),
ip4606 (4),
ip4610Sw (5),
ip4612 (6),
ip4620 (7),
ip4620Sw (8),
ip4624 (9),
analog2500 (10),
ip4621 (11),
ip4622 (12),
ip4625 (13),
dcp2402 (20),
dcp2410 (21),
dcp2420 (22),
dcp6402 (30),
dcp6402D (31),
dcp6408 (32),
dcp6408plus (33),
dcp6408D (34),
dcp6408Dplus (35),
dcp6416Dplus (36),
dcp6424Dplus (37),
dcp8403B (40),
dcp8405B (41),
dcp8405Bplus (42),
dcp8405D (43),
dcp8405Dplus (44),
dcp8410B (45),
dcp8410D (46),
dcp8411B (47),
dcp8411D (48),
dcp8434D (49)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Station model type"
::= { avSurvStationEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.4
avSurvStationInterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface Index bit map. Bit assignment as follows: bits 0-7 = port,
bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type.
Note: This element has been deprecated in SLS R4.1. For legacy stations,
use avSurvStationSlotPort to communicate slot-port info."
::= { avSurvStationEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.5
avSurvStationCOR OBJECT-TYPE
SYNTAX INTEGER
{
emergency (1),
internal (2),
local (3),
toll (4),
unrestricted (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Station Class of Outgoing Restriction (COR) level"
::= { avSurvStationEntry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.6
avSurvStationTrunkDest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Station trunk destination. Can be used to answer incomming trunk calls"
::= { avSurvStationEntry 6 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.7
avSurvStationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry"
::= {avSurvStationEntry 7 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.8
avSurvStationExpansionModule OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Station set has an expansion module in place. This is only
allowed for the digital phones (IP and DCP.
IP phone models 4620, 4621, 4625 may use EU24 and EU24BL.
DCP phone models 2420 may use EU24 and EU24BL.
DCP phone models 6416 and 6424 may use modesl 801A and XM24."
::= {avSurvStationEntry 8 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.9
avSurvStationSlotPort OBJECT-TYPE
SYNTAX DisplayString (SIZE (4..4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"CM slot/port in the Vyxx format"
::= {avSurvStationEntry 9 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.10
avSurvStationSwitchHookFlash OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Switchhook flash is allowed only for analog phones"
::= {avSurvStationEntry 10 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.11
avSurvStationIpAddressRegistered OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of registered IP station. Note only for IP stations"
::= {avSurvStationEntry 11 }
-- 1.3.6.1.4.1.6889.2.6.4.2.1.12
avSurvStationName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..27))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Station or user's Name"
::= { avSurvStationEntry 12 }
-- 1.3.6.1.4.1.6889.2.6.4.3
avSurvTrunkGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvTrunkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trunk Group Table"
::= { avSurvMib 3 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1
avSurvTrunkGroupEntry OBJECT-TYPE
SYNTAX AvSurvTrunkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains index(ACM Trunk Group Number), trunk-type, Trunk Access Code, and dial-mode"
INDEX {
avSurvTrunkGroupNum
}
::= { avSurvTrunkGroupTable 1 }
AvSurvTrunkGroupEntry ::= SEQUENCE {
avSurvTrunkGroupNum INTEGER,
avSurvTrunkGroupType INTEGER,
avSurvTrunkGroupTAC DisplayString,
avSurvTrunkGroupDial INTEGER,
avSurvTrunkGroupRowStatus RowStatus,
avSurvTrunkGroupDidDigitTreatment INTEGER,
avSurvTrunkGroupDidDigitsInsert DisplayString,
avSurvTrunkGroupDidSupervision INTEGER,
avSurvTrunkGroupName DisplayString,
avSurvTrunkGroupCodesetDisplay INTEGER,
avSurvTrunkGroupCodesetNational INTEGER,
avSurvTrunkGroupChannelPreference INTEGER,
avSurvTrunkGroupDigitHandling INTEGER,
avSurvTrunkGroupJapanDisconnect INTEGER,
avSurvTrunkGroupSendName INTEGER,
avSurvTrunkGroupSendCallingNumber INTEGER,
avSurvTrunkGroupNumberingFormat INTEGER,
avSurvTrunkGroupIncomingDestination DisplayString,
avSurvTrunkGroupIncomingDialTone INTEGER,
avSurvTrunkGroupR2MFCSignaling INTEGER,
avSurvTrunkGroupTrunkHunt INTEGER,
avSurvTrunkGroupDs1Supervision INTEGER,
avSurvTrunkGroupCbc INTEGER,
avSurvTrunkGroupCbcServiceFeature INTEGER,
avSurvTrunkGroupCbcParameter INTEGER,
avSurvTrunkGroupBusyDisconnect INTEGER
}
-- 1.3.6.1.4.1.6889.2.6.4.3.1.1
avSurvTrunkGroupNum OBJECT-TYPE
SYNTAX INTEGER (1..2000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trunk Group Number"
::= { avSurvTrunkGroupEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.2
avSurvTrunkGroupType OBJECT-TYPE
SYNTAX INTEGER
{
analogLoopStart (1),
analogDid (2),
analogGroundStart (3),
bri (4),
t1InBandSignaling (5),
t1IsdnSignaling (6),
e1InBandSignaling (7),
e1IsdnSignaling (8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trunk Group Type"
::= { avSurvTrunkGroupEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.3
avSurvTrunkGroupTAC OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trunk Group Trunk Access Code (TAC)"
::= { avSurvTrunkGroupEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.4
avSurvTrunkGroupDial OBJECT-TYPE
SYNTAX INTEGER
{
rotary (1),
dtmf (2),
mf (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trunk Group Outward Dial. Note MF not supported in SLS"
::= { avSurvTrunkGroupEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.5
avSurvTrunkGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry"
::= {avSurvTrunkGroupEntry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.6
avSurvTrunkGroupDidDigitTreatment OBJECT-TYPE
SYNTAX INTEGER
{
absorb1 (1),
absorb2 (2),
absorb3 (3),
absorb4 (4),
absorb5 (5),
insert1 (11),
insert2 (12),
insert3 (13),
insert4 (14),
blank (99)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trunk Group DID digit treatment option.
This applies for analog DID trunks and non-ISDN digital tie trunks.
Note: blank means take no action."
::= { avSurvTrunkGroupEntry 6 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.7
avSurvTrunkGroupDidDigitsInsert OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Digit string to be inserted for DID treatment
This applies for analog DID trunks and non-ISDN digital tie trunks."
::= { avSurvTrunkGroupEntry 7 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.8
avSurvTrunkGroupDidSupervision OBJECT-TYPE
SYNTAX INTEGER
{
immediate (1),
wink (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of incoming supervision used on DID trunk.
This applies only for analog DID trunks."
::= { avSurvTrunkGroupEntry 8 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.9
avSurvTrunkGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..27))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Customer's name for trunk group"
::= { avSurvTrunkGroupEntry 9 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.10
avSurvTrunkGroupCodesetDisplay OBJECT-TYPE
SYNTAX INTEGER
{
codeset0 (0),
codeset6 (6),
codeset7 (7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Which Q.931 codesets are allowed to send Display IE's to the user phones
This applies only to ISDN BRI/PRI trunks."
::= { avSurvTrunkGroupEntry 10 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.11
avSurvTrunkGroupCodesetNational OBJECT-TYPE
SYNTAX INTEGER
{
codeset6 (6),
codeset7 (7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Which codesets are allowed to send National supported IE's.
This applies only to ISDN BRI/PRI trunks."
::= { avSurvTrunkGroupEntry 11 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.12
avSurvTrunkGroupChannelPreference OBJECT-TYPE
SYNTAX INTEGER
{
exclusive (1),
preferred (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used for encoding Channel-ID IE.
This applies only to ISDN BRI/PRI trunks."
::= { avSurvTrunkGroupEntry 12 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.13
avSurvTrunkGroupDigitHandling OBJECT-TYPE
SYNTAX INTEGER
{
enblocEnbloc (0),
enblocOverlap (1),
overlapEnbloc (2),
overlapOverlap (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines overlap receiving and transmitting rules.
This applies only to ISDN BRI/PRI trunks."
::= { avSurvTrunkGroupEntry 13 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.14
avSurvTrunkGroupJapanDisconnect OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Send a Q.931 CONNECT msg right before sending DISCONNECT msg.
This applies only to ISDN BRI/PRI trunks in Japan."
::= { avSurvTrunkGroupEntry 14 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.15
avSurvTrunkGroupSendName OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2),
restricted (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether Calling, Connected, Called party's name
is to be shared with network.
This applies only to ISDN BRI/PRI trunks.
Default is no."
::= { avSurvTrunkGroupEntry 15 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.16
avSurvTrunkGroupSendCallingNumber OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2),
restricted (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies how to fill the Calling-Party and Called-Party IE fields.
This applies only to ISDN BRI/PRI trunks.
Default is no."
::= { avSurvTrunkGroupEntry 16 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.17
avSurvTrunkGroupNumberingFormat OBJECT-TYPE
SYNTAX INTEGER
{
unknown (1),
public (2),
private (3),
unknownPrivate (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies how to fill the Calling-Party and Called-Party IE fields.
This applies only to ISDN BRI/PRI trunks.
SLS only supports unknown(1) and public(2). Default is unknown."
::= { avSurvTrunkGroupEntry 17 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.18
avSurvTrunkGroupIncomingDestination OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..13))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Analog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group calls"
::= { avSurvTrunkGroupEntry 18 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.19
avSurvTrunkGroupIncomingDialTone OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Analog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizure"
::= { avSurvTrunkGroupEntry 19 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.20
avSurvTrunkGroupR2MFCSignaling OBJECT-TYPE
SYNTAX INTEGER
{
set1 (1),
set2 (2),
set3 (3),
set4 (4),
set5 (5),
set6 (6),
set7 (7),
set8 (8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines MFC signaling set to be used.
This only applies to R2MFC trunks.
This feature not supported in SLS for R4.0"
::= { avSurvTrunkGroupEntry 20 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.21
avSurvTrunkGroupTrunkHunt OBJECT-TYPE
SYNTAX INTEGER
{
ascend (1),
cyclical (2),
descend (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines the method in which the SLS call engine selects from
the trunk group pool of available trunks.
This only applies to digital trunks."
::= { avSurvTrunkGroupEntry 21 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.22
avSurvTrunkGroupDs1Supervision OBJECT-TYPE
SYNTAX INTEGER
{
loopStart (3),
groundStart (4),
winkWink (5),
winkImmediate (6),
winkAuto (7),
immediateImmediate (8),
autoAuto (9),
autoWink (10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Applies to non-ISDN DS1 trunks: Specifies the type
of incomming/outgoing supervision that is used on these trunks."
::= { avSurvTrunkGroupEntry 22 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.23
avSurvTrunkGroupCbc OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Applies to ISDN DS1 trunks: Specifies whether the trunk is to
operate in call-by-call basis. If yes, then send the NSF IE."
::= { avSurvTrunkGroupEntry 23 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.24
avSurvTrunkGroupCbcServiceFeature OBJECT-TYPE
SYNTAX INTEGER
{
sdn (225),
megacom (227),
operator (197),
suboperator (198),
lds (231),
scocs (246)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Applies to ISDN DS1 trunks: Specifies the type of service
or feature specifed in the NSF IE for outbound trunk calls.
Only valid if CBC=yes."
::= { avSurvTrunkGroupEntry 24 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.25
avSurvTrunkGroupCbcParameter OBJECT-TYPE
SYNTAX INTEGER (0..99999)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Applies to ISDN DS1 trunks: Specifies the class of
service being offered as part of Selective Class of
Call Selection (scocs)service mode.
Only valid if service mode is scocs."
::= { avSurvTrunkGroupEntry 25 }
-- 1.3.6.1.4.1.6889.2.6.4.3.1.26
avSurvTrunkGroupBusyDisconnect OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Applies to Analog Loop Start Trunks: Specifies whether
the presence of busy tone signal will cause the
trunk call to be disconnected. Default = no."
::= { avSurvTrunkGroupEntry 26 }
-- 1.3.6.1.4.1.6889.2.6.4.4
avSurvTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trunk table"
::= { avSurvMib 4 }
-- 1.3.6.1.4.1.6889.2.6.4.4.1
avSurvTrunkEntry OBJECT-TYPE
SYNTAX AvSurvTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains dual index(group-reference-number and table index), interface bit map, slot-port, and sig-group reference-number"
INDEX {
avSurvTrunkGroupRefNumber, avSurvTrunkIndex
}
::= { avSurvTrunkTable 1 }
AvSurvTrunkEntry ::= SEQUENCE {
avSurvTrunkGroupRefNumber INTEGER,
avSurvTrunkIndex Integer32,
avSurvTrunkInterfaceIndex Integer32,
avSurvTrunkRowStatus RowStatus,
avSurvTrunkSlotPort DisplayString,
avSurvTrunkSigGroupRefNumber INTEGER
}
-- 1.3.6.1.4.1.6889.2.6.4.4.1.1
avSurvTrunkGroupRefNumber OBJECT-TYPE
SYNTAX INTEGER (1..2000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trunk Pool Group Reference Number - Association of trunk pool
with trunk group"
::= { avSurvTrunkEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.4.1.2
avSurvTrunkIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"trunk table index"
::= { avSurvTrunkEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.4.1.3
avSurvTrunkInterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface Index bit map. Bit assignment as follows: bits 0-7 = port,
bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type
Note: This element has been deprecated in SLS R4.1. For legacy trunks,
use avSurvTrunkSlotPort to communicate slot-port info."
::= { avSurvTrunkEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.4.1.4
avSurvTrunkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry"
::= {avSurvTrunkEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.4.1.5
avSurvTrunkSlotPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(4..4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ACM slot/port in the Vyxx format"
::= {avSurvTrunkEntry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.4.1.6
avSurvTrunkSigGroupRefNumber OBJECT-TYPE
SYNTAX INTEGER (1..650)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Signaling Group Number that is the manager of this ISDN trunk member"
::= { avSurvTrunkEntry 6 }
-- 1.3.6.1.4.1.6889.2.6.4.5
avSurvArsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvArsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Automatic Route Selection (ARS) Table"
::= { avSurvMib 5 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1
avSurvArsEntry OBJECT-TYPE
SYNTAX AvSurvArsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains index, dial-string-pattern, dial-plan-type, max-length, group-reference-number, dial-action, delete-digits, insert-digits, and min-length"
INDEX {
avSurvDialIndex
}
::= { avSurvArsTable 1 }
AvSurvArsEntry ::= SEQUENCE {
avSurvDialIndex Integer32,
avSurvDialString DisplayString,
avSurvDialType INTEGER,
avSurvDialMaximumLength INTEGER,
avSurvDialGroupRefNumber INTEGER,
avSurvDialAction INTEGER,
avSurvDialRowStatus RowStatus,
avSurvDialDeleteDigits INTEGER,
avSurvDialInsertDigits DisplayString,
avSurvDialMinimumLength INTEGER
}
-- 1.3.6.1.4.1.6889.2.6.4.5.1.1
avSurvDialIndex OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Call Pattern index"
::= { avSurvArsEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.2
avSurvDialString OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..18))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dialed string entry that is used to match a pattern
within the user-dialed number"
::= { avSurvArsEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.3
avSurvDialType OBJECT-TYPE
SYNTAX INTEGER
{
emergency (1),
foreignNumberingPlanArea (2),
homeNumberingPlanArea (3),
international (4),
internationalOperator (5),
local (6),
national (7),
operator (8),
service (9)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Call Type"
::= { avSurvArsEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.4
avSurvDialMaximumLength OBJECT-TYPE
SYNTAX INTEGER (1..28)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum length of the user-dialed number that the survivability
call-engine collects to match to the dialed-string.
By default, the minimum length is defined to be equal to
the length of the dialed string"
::= { avSurvArsEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.5
avSurvDialGroupRefNumber OBJECT-TYPE
SYNTAX INTEGER (1..2000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Call group reference number"
::= { avSurvArsEntry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.6
avSurvDialAction OBJECT-TYPE
SYNTAX INTEGER
{
denyCall (1),
allowCall (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Call dial action"
::= { avSurvArsEntry 6 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.7
avSurvDialRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry"
::= {avSurvArsEntry 7 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.8
avSurvDialDeleteDigits OBJECT-TYPE
SYNTAX INTEGER (0..28)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the number of dialed digits to be deleted from
the beginning of the string"
::= { avSurvArsEntry 8 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.9
avSurvDialInsertDigits OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..36))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the digit string to be inserted. Includes ',' for pause."
::= { avSurvArsEntry 9 }
-- 1.3.6.1.4.1.6889.2.6.4.5.1.10
avSurvDialMinimumLength OBJECT-TYPE
SYNTAX INTEGER (1..28)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum length of the user-dialed number that the survivability
call-engine collects to match to the dialed-string.
By default, the minimum length is defined to be equal to
the length of the avSurvDialString element"
::= { avSurvArsEntry 10 }
-- 1.3.6.1.4.1.6889.2.6.4.6
avSurvFacTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvFacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Automatic Route Selection Facility Table"
::= { avSurvMib 6 }
-- 1.3.6.1.4.1.6889.2.6.4.6.1
avSurvFacEntry OBJECT-TYPE
SYNTAX AvSurvFacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains index, an ARS Facility dialing code and the Type of FAC feature"
INDEX {
avSurvFacIndex
}
::= { avSurvFacTable 1 }
AvSurvFacEntry ::= SEQUENCE {
avSurvFacIndex Integer32,
avSurvFacId DisplayString,
avSurvFacRowStatus RowStatus,
avSurvFacType INTEGER
}
-- 1.3.6.1.4.1.6889.2.6.4.6.1.1
avSurvFacIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Fac Index"
::= { avSurvFacEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.6.1.2
avSurvFacId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ARS Facility dialing code"
::= { avSurvFacEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.6.1.3
avSurvFacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry"
::= { avSurvFacEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.6.1.4
avSurvFacType OBJECT-TYPE
SYNTAX INTEGER
{
ars1 (1),
ars2 (2),
hold (3),
contactOpen (4),
contactClose (5),
contactPulse (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Feature Access Code(FAC) dial codes Supported"
::= { avSurvFacEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.1.7
avSurvIpVoiceCodecSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvIpVoiceCodecSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ip Voice Codec Set Table"
::= { avSurvMib 7 }
-- 1.3.6.1.4.1.6889.2.6.4.7.1
avSurvIpVoiceCodecSetEntry OBJECT-TYPE
SYNTAX AvSurvIpVoiceCodecSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains dual index(cm-codec-set-num and table index), priority, codec-type, silence sup, number-of-frames"
INDEX {
avSurvIpVoiceCodecSetNum, avSurvIpVoiceCodecSetIndex
}
::= { avSurvIpVoiceCodecSetTable 1 }
AvSurvIpVoiceCodecSetEntry ::= SEQUENCE {
avSurvIpVoiceCodecSetNum Integer32,
avSurvIpVoiceCodecSetIndex Integer32,
avSurvIpVoiceCodecSetPriority INTEGER,
avSurvIpVoiceCodecSetType INTEGER,
avSurvIpVoiceCodecSetSilence TruthValue,
avSurvIpVoiceCodecSetFrames INTEGER,
avSurvIpVoiceCodecSetRowStatus RowStatus
}
-- 1.3.6.1.4.1.6889.2.6.4.7.1.1
avSurvIpVoiceCodecSetNum OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ip Codec Set Identification"
::= { avSurvIpVoiceCodecSetEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.7.1.2
avSurvIpVoiceCodecSetIndex OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ip Codec Index"
::= { avSurvIpVoiceCodecSetEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.7.1.3
avSurvIpVoiceCodecSetPriority OBJECT-TYPE
SYNTAX INTEGER (1 .. 7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Priority of codec set type (determines preferential use)"
::= { avSurvIpVoiceCodecSetEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.7.1.4
avSurvIpVoiceCodecSetType OBJECT-TYPE
SYNTAX INTEGER
{
g711u (1),
g711a (2),
g723 (3),
g729 (4),
g729a (5),
g729b (6),
g729ab (7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ip Codec Type"
::= { avSurvIpVoiceCodecSetEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.7.1.5
avSurvIpVoiceCodecSetSilence OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Codec Silence Suppression"
::= { avSurvIpVoiceCodecSetEntry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.7.1.6
avSurvIpVoiceCodecSetFrames OBJECT-TYPE
SYNTAX INTEGER (1..6)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Codec number of frames"
::= { avSurvIpVoiceCodecSetEntry 6 }
-- 1.3.6.1.4.1.6889.2.6.4.1.7.1.7
avSurvIpVoiceCodecSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry"
::= { avSurvIpVoiceCodecSetEntry 7 }
-- 1.3.6.1.4.1.6889.2.6.4.8
avSurvIpCodecSetConfig OBJECT IDENTIFIER ::= { avSurvMib 8 }
-- 1.3.6.1.4.1.6889.2.6.4.8.1
avSurvIpCodecSetFaxMode OBJECT-TYPE
SYNTAX INTEGER
{
off (1),
relay (2),
passthru (3),
t38 (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Fax operational protocol mode"
::= { avSurvIpCodecSetConfig 1 }
-- 1.3.6.1.4.1.6889.2.6.4.8.2
avSurvIpCodecSetFaxRedundancy OBJECT-TYPE
SYNTAX INTEGER (0 .. 3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Redundant packets encoded during fax mode"
::= { avSurvIpCodecSetConfig 2 }
-- 1.3.6.1.4.1.6889.2.6.4.8.3
avSurvIpCodecSetModemMode OBJECT-TYPE
SYNTAX INTEGER
{
off (1),
relay (2),
passthru (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data modem protocol mode"
::= { avSurvIpCodecSetConfig 3 }
-- 1.3.6.1.4.1.6889.2.6.4.8.4
avSurvIpCodecSetModemRedundancy OBJECT-TYPE
SYNTAX INTEGER (0 .. 3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Redundant packets encoded for Modem mode"
::= { avSurvIpCodecSetConfig 4 }
-- 1.3.6.1.4.1.6889.2.6.4.8.5
avSurvIpCodecSetTtyMode OBJECT-TYPE
SYNTAX INTEGER
{
off (1),
us (2),
uk (3),
passthru (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TTY protocol mode"
::= { avSurvIpCodecSetConfig 5 }
-- 1.3.6.1.4.1.6889.2.6.4.8.6
avSurvIpCodecSetTtyRedundancy OBJECT-TYPE
SYNTAX INTEGER (0 .. 3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Redundant packets encoded for TTY mode"
::= { avSurvIpCodecSetConfig 6 }
-- 1.3.6.1.4.1.6889.2.6.4.8.7
avSurvIpCodecSetClearChanMode OBJECT-TYPE
SYNTAX INTEGER
{
disabled (1),
enabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Clear channel protocol mode. Preference for G711 wrapping"
::= { avSurvIpCodecSetConfig 7 }
-- 1.3.6.1.4.1.6889.2.6.4.8.8
avSurvIpCodecSetClearChanRedundancy OBJECT-TYPE
SYNTAX INTEGER (0 .. 1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Redundant packets encoded for clear channel mode"
::= { avSurvIpCodecSetConfig 8 }
-- 1.3.6.1.4.1.6889.2.6.4.8.9
avSurvIpCodecSetEncryptPriority1 OBJECT-TYPE
SYNTAX INTEGER
{
aes (1),
aea (2),
none (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Media Encryption type - 1st priority"
::= { avSurvIpCodecSetConfig 9 }
-- 1.3.6.1.4.1.6889.2.6.4.8.10
avSurvIpCodecSetEncryptPriority2 OBJECT-TYPE
SYNTAX INTEGER
{
aes (1),
aea (2),
none (3),
unused (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Media Encryption type - 2nd priority "
::= { avSurvIpCodecSetConfig 10 }
-- 1.3.6.1.4.1.6889.2.6.4.8.11
avSurvIpCodecSetEncryptPriority3 OBJECT-TYPE
SYNTAX INTEGER
{
aes (1),
aea (2),
none (3),
unused (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Media Encryption type - 3rd priority"
::= { avSurvIpCodecSetConfig 11 }
-- 1.3.6.1.4.1.6889.2.6.4.9
avSurvSlotConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvSlotConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot Configuration Table"
::= { avSurvMib 9 }
-- 1.3.6.1.4.1.6889.2.6.4.9.1
avSurvSlotConfigEntry OBJECT-TYPE
SYNTAX AvSurvSlotConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains an index, number id, board type, and row status"
INDEX {
avSurvSlotConfigIndex
}
::= { avSurvSlotConfigTable 1 }
AvSurvSlotConfigEntry ::= SEQUENCE {
avSurvSlotConfigIndex Integer32,
avSurvSlotConfigNumberId DisplayString,
avSurvSlotConfigBoardType INTEGER,
avSurvSlotConfigRowStatus RowStatus
}
-- 1.3.6.1.4.1.6889.2.6.4.9.1.1
avSurvSlotConfigIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Slot Config Table Index"
::= { avSurvSlotConfigEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.9.1.2
avSurvSlotConfigNumberId OBJECT-TYPE
SYNTAX DisplayString (SIZE (2))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the string identifier that CM uses to identify the slot
of the media gateway. The first character is defined as a v
followed by one decimal number, e.g. v1"
::= { avSurvSlotConfigEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.9.1.3
avSurvSlotConfigBoardType OBJECT-TYPE
SYNTAX INTEGER
{
mm312 (32),
mm710 (5),
mm711 (4),
mm712 (3),
mm714 (7),
mm716 (22),
mm717 (14),
mm720 (2),
mm722 (8),
anaImm1t2l (9),
anaImm4t2l (16),
briImm (17),
dcpImm (18),
ds1Imm (19),
tgm550 (23),
tim508 (29),
tim510 (25),
tim514 (24),
tim516 (30),
tim518 (31),
tim521 (26)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of media module in the associated slot
mm312 has 24 low-density DCP station ports
mm710 has one DS1 interface
mm711 has 8 port universal analog
mm712 has 8 DCP station ports
mm714 has 4 analog trunk ports and 4 analog station ports
mm716 has 24 high-density analog station ports
mm717 has 24 high-density DCP station ports
mm720 has 8 bri trunk ports (16 channels)
mm722 has 2 bri trunk ports (4 channels)
anaImm1t2l is G250 Internal media module 1 Analog Trunk + 2 Analog Lines
anaImm4t2l is G250 Internal media module 4 Analog Trunks + 2 Analog Lines
briImm is G250 Internal media module 2 port BRI
dcpImm is G250 Internal media module 12 port DCP
ds1Imm is G250 Internal media module DS1
tgm550 is IG550 telephony gateway module with 2 Analog Trunks + 2 Analog Lines
tim508 is IG550 telephony interface module 8 analog station ports
tim510 is IG550 telephony interface module DS1
tim514 is IG550 telephony interface module 4 Analog Trunks + 2 Analog stations
tim516 is IG550 telephony interface module 16 analog station ports
tim518 is IG550 telephony interface module 8 analog stations and 8 analog trunks
tim521 is IG550 telephony interface module 4 port BRI"
::= { avSurvSlotConfigEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.9.1.4
avSurvSlotConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry in this table"
::= { avSurvSlotConfigEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.1.10
avSurvDs1Table OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvDs1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DS1 trunk instantiation Table"
::= { avSurvMib 10 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1
avSurvDs1Entry OBJECT-TYPE
SYNTAX AvSurvDs1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains an index, name, bit-rate, signaling-mode, channel numbering, connect, interface, side, country-protocol, protocol-version, bearer-capability, interface-companding, long-timer, and slot-number-id. "
INDEX {
avSurvDs1Index
}
::= { avSurvDs1Table 1 }
AvSurvDs1Entry ::= SEQUENCE {
avSurvDs1Index Integer32,
avSurvDs1Name DisplayString,
avSurvDs1BitRate INTEGER,
avSurvDs1SignalingMode INTEGER,
avSurvDs1ChannelNumbering INTEGER,
avSurvDs1Connect INTEGER,
avSurvDs1Interface INTEGER,
avSurvDs1Side INTEGER,
avSurvDs1CountryProtocol INTEGER,
avSurvDs1ProtocolVersion INTEGER,
avSurvDs1BearerCapability INTEGER,
avSurvDs1InterfaceCompanding INTEGER,
avSurvDs1LongTimer INTEGER,
avSurvDs1RowStatus RowStatus,
avSurvDs1SlotNumberId DisplayString
}
-- 1.3.6.1.4.1.6889.2.6.4.10.1.1
avSurvDs1Index OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DS1 Table Index"
::= { avSurvDs1Entry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.2
avSurvDs1Name OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the service provider and/or site destination of DS1 facility"
::= { avSurvDs1Entry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.3
avSurvDs1BitRate OBJECT-TYPE
SYNTAX INTEGER
{
rate1544 (1),
rate2048 (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum transmission rate for DS1 interface"
::= { avSurvDs1Entry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.4
avSurvDs1SignalingMode OBJECT-TYPE
SYNTAX INTEGER
{
cas (1),
robbedBit (2),
isdnPri (3),
isdnExt (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Selects the signaling method deployed on the given DS1 facility"
::= { avSurvDs1Entry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.5
avSurvDs1ChannelNumbering OBJECT-TYPE
SYNTAX INTEGER
{
sequential (1),
timeSlot (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Channel numbering scheme;
E1 interface for ETSI and QSIG requires sequential encoding from
1 to 30"
::= { avSurvDs1Entry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.6
avSurvDs1Connect OBJECT-TYPE
SYNTAX INTEGER
{
host (1),
network (2),
pbx (3),
lineSide (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies what type of equipment is at the far end of the DS1 link"
::= { avSurvDs1Entry 6 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.7
avSurvDs1Interface OBJECT-TYPE
SYNTAX INTEGER
{
user (0),
network (1),
peerMaster (3),
peerSlave (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines glare handling"
::= { avSurvDs1Entry 7 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.8
avSurvDs1Side OBJECT-TYPE
SYNTAX INTEGER
{
a (0),
b (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"QSIG glare handling when interface field is peerSlave"
::= { avSurvDs1Entry 8 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.9
avSurvDs1CountryProtocol OBJECT-TYPE
SYNTAX INTEGER
{
country1 (1),
country2 (2),
country3 (3),
country4 (4),
country5 (5),
country6 (6),
country7 (7),
country8 (8),
country9 (9),
country10 (10),
country11 (11),
country12 (12),
country13 (13),
country14 (14),
country15 (15),
country16 (16),
country17 (17),
country18 (18),
country19 (19),
country20 (20),
country21 (21),
country22 (22),
country23 (23),
country24 (24),
country25 (25),
etsi (62),
qsig (63)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the Layer 3 signaling protocol used by the
country-specific service provider.
This applies to ISDN trunk."
::= { avSurvDs1Entry 9 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.10
avSurvDs1ProtocolVersion OBJECT-TYPE
SYNTAX INTEGER
{
a (0),
b (1),
c (2),
d (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in countries whose public networks allow multiple Layer-3
signaling protocols for ISDN PRI service."
::= { avSurvDs1Entry 10 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.11
avSurvDs1BearerCapability OBJECT-TYPE
SYNTAX INTEGER
{
threeKhz (0),
speech (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sets the information transfer capability in the Bearer Capability
IE of SETUP message for ISDN PRI service."
::= { avSurvDs1Entry 11 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.12
avSurvDs1InterfaceCompanding OBJECT-TYPE
SYNTAX INTEGER
{
alaw (1),
ulaw (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the companding method used by the far-end switch"
::= { avSurvDs1Entry 12 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.13
avSurvDs1LongTimer OBJECT-TYPE
SYNTAX INTEGER
{
no (1),
yes (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether the duration of the T302 and T303 Q.931 timers
should be extended to a longer duration. Used for Russia country
code"
::= { avSurvDs1Entry 13 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.14
avSurvDs1RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry in this table"
::= { avSurvDs1Entry 14 }
-- 1.3.6.1.4.1.6889.2.6.4.10.1.15
avSurvDs1SlotNumberId OBJECT-TYPE
SYNTAX DisplayString (SIZE (2))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the string identifier that CM uses to identify the slot
of the media gateway. The first character is defined as a v
followed by one decimal number, e.g. v1"
::= { avSurvDs1Entry 15 }
-- 1.3.6.1.4.1.6889.2.6.4.1.11
avSurvSigGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvSigGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Signaling Group, associated with an ISDN trunk group, Table"
::= { avSurvMib 11 }
-- 1.3.6.1.4.1.6889.2.6.4.11.1
avSurvSigGroupEntry OBJECT-TYPE
SYNTAX AvSurvSigGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains an index, channel selection, associated signaling, primary D channel, and row status"
INDEX {
avSurvSigGroupIndex
}
::= { avSurvSigGroupTable 1 }
AvSurvSigGroupEntry ::= SEQUENCE {
avSurvSigGroupIndex Integer32,
avSurvSigGroupChannelSelection INTEGER,
avSurvSigGroupAssociatedSignaling INTEGER,
avSurvSigGroupPrimaryDChannel DisplayString,
avSurvSigGroupRowStatus RowStatus
}
-- 1.3.6.1.4.1.6889.2.6.4.11.1.1
avSurvSigGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..650)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SigGroup Table Index"
::= { avSurvSigGroupEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.11.1.2
avSurvSigGroupChannelSelection OBJECT-TYPE
SYNTAX INTEGER (1..2000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If there is more than one trunk group assigned to this signaling
group, the channel selection number is the trunk group that can
accept incoming calls"
::= { avSurvSigGroupEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.11.1.3
avSurvSigGroupAssociatedSignaling OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether the D-channel is physically associated in the
DS1 facility, yes = D-channel present"
::= { avSurvSigGroupEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.11.1.4
avSurvSigGroupPrimaryDChannel OBJECT-TYPE
SYNTAX DisplayString (SIZE (7))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The identity for the D-channel 3 digit gw number + 2 character
slot number + 2 digit port circuit number"
::= { avSurvSigGroupEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.11.1.5
avSurvSigGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry in this table"
::= { avSurvSigGroupEntry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.1.12
avSurvBriTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvBriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BRI trunk instantiation Table"
::= { avSurvMib 12 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1
avSurvBriEntry OBJECT-TYPE
SYNTAX AvSurvBriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains an index, name, interface, side, country-protocol,
bearer-capability, interface-companding, tei-assignment, directory-numberA,
directory-numberB, spidA, spidB, endpoint-initialization,
layer1-stable, and slot-number-id.
This table instantiation completely specifies a BRI circuit, consisting
of channel B1 and channel B2"
INDEX {
avSurvBriIndex
}
::= { avSurvBriTable 1 }
AvSurvBriEntry ::= SEQUENCE {
avSurvBriIndex Integer32,
avSurvBriName DisplayString,
avSurvBriInterface INTEGER,
avSurvBriSide INTEGER,
avSurvBriCountryProtocol INTEGER,
avSurvBriBearerCapability INTEGER,
avSurvBriInterfaceCompanding INTEGER,
avSurvBriTeiAssignment INTEGER,
avSurvBriDirectoryNumberA DisplayString,
avSurvBriDirectoryNumberB DisplayString,
avSurvBriSpidA DisplayString,
avSurvBriSpidB DisplayString,
avSurvBriEndpointInit INTEGER,
avSurvBriLayer1Stable INTEGER,
avSurvBriRowStatus RowStatus,
avSurvBriSlotPortNumberId DisplayString
}
-- 1.3.6.1.4.1.6889.2.6.4.12.1.1
avSurvBriIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BRI Table Index
Note: G250-BRI supports 2 ports (4-channels)
G350/IG550 is allocated a max of 24 ports (48-channels)
G430/G450 is allocated a max of 64 ports (128 channels).
"
::= { avSurvBriEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.2
avSurvBriName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the service provider and/or site destination of BRI facility"
::= { avSurvBriEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.3
avSurvBriInterface OBJECT-TYPE
SYNTAX INTEGER
{
user (0),
network (1),
peerMaster (3),
peerSlave (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines glare handling. Non-QSIG calls: a-network, b-user;
QSIG calls: a-peerMaster, b-peerSlave"
::= { avSurvBriEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.4
avSurvBriSide OBJECT-TYPE
SYNTAX INTEGER
{
a (0),
b (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"QSIG glare handling when interface field is peerSlave"
::= { avSurvBriEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.5
avSurvBriCountryProtocol OBJECT-TYPE
SYNTAX INTEGER
{
country1 (1),
country2 (2),
country3 (3),
country4 (4),
country5 (5),
country6 (6),
country7 (7),
country8 (8),
country9 (9),
country10 (10),
country11 (11),
country12 (12),
country13 (13),
country14 (14),
country15 (15),
country16 (16),
country17 (17),
country18 (18),
country19 (19),
country20 (20),
country21 (21),
country22 (22),
country23 (23),
country24 (24),
country25 (25),
etsi (62),
qsig (63)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the Layer 3 signaling protocol used by the
country-specific service provider"
::= { avSurvBriEntry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.6
avSurvBriBearerCapability OBJECT-TYPE
SYNTAX INTEGER
{
threeKhz (0),
speech (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sets the information transfer capability in the Bearer Capability
IE of SETUP message"
::= { avSurvBriEntry 6 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.7
avSurvBriInterfaceCompanding OBJECT-TYPE
SYNTAX INTEGER
{
alaw (1),
ulaw (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the companding method used )for all circuits on this
media module) by the far-end switch"
::= { avSurvBriEntry 7 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.8
avSurvBriTeiAssignment OBJECT-TYPE
SYNTAX INTEGER
{
auto (1),
zero (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"LAPD address assignment for TEI field, auto is assigned by
network provider"
::= { avSurvBriEntry 8 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.9
avSurvBriDirectoryNumberA OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..10))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Channel B1's directory number"
::= { avSurvBriEntry 9 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.10
avSurvBriDirectoryNumberB OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..10))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Channel B2's directory number"
::= { avSurvBriEntry 10 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.11
avSurvBriSpidA OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..14))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Service Provider Identifier required for Country Code 1 (USA)
to be associated with channel B1"
::= { avSurvBriEntry 11 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.12
avSurvBriSpidB OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..14))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Service Provider Identifier required for Country Code 1 (USA)
to be associated with channel B2"
::= { avSurvBriEntry 12 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.13
avSurvBriEndpointInit OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines whether the far end supports endpoint initialization"
::= { avSurvBriEntry 13 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.14
avSurvBriLayer1Stable OBJECT-TYPE
SYNTAX INTEGER
{
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines whether to expect the network to drop BRI layer 1
when no calls are active.
yes = keep layer 1 stable"
::= { avSurvBriEntry 14 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.15
avSurvBriRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry in this table"
::= { avSurvBriEntry 15 }
-- 1.3.6.1.4.1.6889.2.6.4.12.1.16
avSurvBriSlotPortNumberId OBJECT-TYPE
SYNTAX DisplayString (SIZE (4..4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the string identifier formed by the combination of the slot identifier that CM uses
to identify the slot of the media gateway(first character is a v followed by one numeric
character). The port consists of two numeric characters that identify the first B-channel
of the physical BRI port circuit(for example the 1st port is always 01)."
::= { avSurvBriEntry 16 }
-- 1.3.6.1.4.1.6889.2.6.4.1.13
avSurvIncomingRoutingTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvIncomingRoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Incoming Routing Table"
::= { avSurvMib 13 }
-- 1.3.6.1.4.1.6889.2.6.4.13.1
avSurvIncomingRoutingEntry OBJECT-TYPE
SYNTAX AvSurvIncomingRoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a dual index(trunk-group-reference-number and
table index), match-pattern, delete-digits, insert-digits specification
and routing-mode.
This table instantiation completely specifies an the digit handling for
an incoming dial-string pattern.
Note 1: If the trunk-group employs Overlap Receiving, there will only be one
entry (this may only have a delete or an insert operand).
Note 2: If the trunk-group employs Enbloc Receiving, there may be a maximum
of 50 entries. Each entry will have a Match-pattern, Length, Delete, and
Insert element."
INDEX {
avSurvIncomingRoutingGroupRefNumber,avSurvIncomingRoutingIndex
}
::= { avSurvIncomingRoutingTable 1 }
AvSurvIncomingRoutingEntry ::= SEQUENCE {
avSurvIncomingRoutingGroupRefNumber INTEGER,
avSurvIncomingRoutingIndex Integer32,
avSurvIncomingRoutingMatchPattern DisplayString,
avSurvIncomingRoutingLength INTEGER,
avSurvIncomingRoutingDeleteDigits INTEGER,
avSurvIncomingRoutingInsertDigits DisplayString,
avSurvIncomingRoutingMode INTEGER,
avSurvIncomingRoutingRowStatus RowStatus
}
-- 1.3.6.1.4.1.6889.2.6.4.13.1.1
avSurvIncomingRoutingGroupRefNumber OBJECT-TYPE
SYNTAX INTEGER (1..2000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Incoming trunk-group reference number"
::= { avSurvIncomingRoutingEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.13.1.2
avSurvIncomingRoutingIndex OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Incoming Routing Table Index"
::= { avSurvIncomingRoutingEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.13.1.3
avSurvIncomingRoutingMatchPattern OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dial-string entry that is used to match a pattern on inbound
trunk calls. Note that '0' is used to designate the blank
or empty string value as a wild card match."
::= { avSurvIncomingRoutingEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.13.1.4
avSurvIncomingRoutingLength OBJECT-TYPE
SYNTAX INTEGER
{
len0 (0),
len1 (1),
len2 (2),
len3 (3),
len4 (4),
len5 (5),
len6 (6),
len7 (7),
len8 (8),
len9 (9),
len10 (10),
len11 (11),
len12 (12),
len13 (13),
len14 (14),
len15 (15),
len16 (16),
len17 (17),
len18 (18),
len19 (19),
len20 (20),
len21 (21),
blank (99)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum length of the user-dialed number that the SLS call-engine
collects before beginning the pattern matching. Note that CM uses
the blank as a wild card, subject to rule of the MatchPattern
field being set to a wild card value as well."
::= { avSurvIncomingRoutingEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.13.1.5
avSurvIncomingRoutingDeleteDigits OBJECT-TYPE
SYNTAX INTEGER (0..21)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the number of dialed digits to be deleted from
the beginning of the incoming trunk's received digit string"
::= { avSurvIncomingRoutingEntry 5 }
-- 1.3.6.1.4.1.6889.2.6.4.13.1.6
avSurvIncomingRoutingInsertDigits OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the digit string to be inserted (after the deletion
process has been completed) to the incoming trunk digit string"
::= { avSurvIncomingRoutingEntry 6 }
-- 1.3.6.1.4.1.6889.2.6.4.13.1.7
avSurvIncomingRoutingMode OBJECT-TYPE
SYNTAX INTEGER
{
enbloc (0),
overlap (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines overlap receiving and transmitting rules.
This applies only to ISDN BRI/PRI trunks."
::= { avSurvIncomingRoutingEntry 7 }
-- 1.3.6.1.4.1.6889.2.6.4.13.1.8
avSurvIncomingRoutingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry in this table"
::= { avSurvIncomingRoutingEntry 8 }
-- 1.3.6.1.4.1.6889.2.6.4.1.14
avSurvNfasTable OBJECT-TYPE
SYNTAX SEQUENCE OF AvSurvNfasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Signaling Group Nfas , associated with an ISDN trunk group, Table"
::= { avSurvMib 14 }
-- 1.3.6.1.4.1.6889.2.6.4.14.1
avSurvNfasEntry OBJECT-TYPE
SYNTAX AvSurvNfasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a dual index(sig-group-reference-number and table index), interface string, interface id, and row status"
INDEX {
avSurvNfasSigGroupRefNumber, avSurvNfasIndex
}
::= { avSurvNfasTable 1 }
AvSurvNfasEntry ::= SEQUENCE {
avSurvNfasSigGroupRefNumber INTEGER,
avSurvNfasIndex Integer32,
avSurvNfasInterface DisplayString,
avSurvNfasInterfaceId INTEGER,
avSurvNfasRowStatus RowStatus
}
-- 1.3.6.1.4.1.6889.2.6.4.14.1.1
avSurvNfasSigGroupRefNumber OBJECT-TYPE
SYNTAX INTEGER (1..650)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Entry pointing to the associated signaling group number in the signaling group table"
::= { avSurvNfasEntry 1 }
-- 1.3.6.1.4.1.6889.2.6.4.14.1.2
avSurvNfasIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Nfas Table Index"
::= { avSurvNfasEntry 2 }
-- 1.3.6.1.4.1.6889.2.6.4.14.1.3
avSurvNfasInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE (5))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The identity for the NFAS DS1 facility group: 3 digit gateway
number + 2 character slot number"
::= { avSurvNfasEntry 3 }
-- 1.3.6.1.4.1.6889.2.6.4.14.1.4
avSurvNfasInterfaceId OBJECT-TYPE
SYNTAX INTEGER (0..31)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For an NFAS circuit, this specifies the identification number of
the DS1 circuit that is associated with this NFAS group. Note
that this ID number must be coordinated with the PSTN provider
so that the signaling protocol will operate correctly with respect
to physical facility circuit selection."
::= { avSurvNfasEntry 4 }
-- 1.3.6.1.4.1.6889.2.6.4.14.1.5
avSurvNfasRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create/Delete a row entry in this table"
::= { avSurvNfasEntry 5 }
END
View Git Blame Copy Permalink