WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/asentria/s412-MIB

2261 lines
60 KiB
Plaintext
Raw Blame History

-- s412 MIB version 3.10 8 Apr 05
-- for use with 3.10 and up
-- added ES definitions, subtree 40.9 for status and 40.10 for config
-- deprecated SNMP Manager 1, 40.1.4
-- added contact 6 snmp objects and traps
-- added traps for eventsensor points
-- added analog1 and analog2 names
-- modified analog1 and analog2 traps to send analog names
-- input78mode changed to read-only, deprecated
-- added humidityName
-- added temperatureName
-- modified sensor name comments to indicate 30 character wide names
s412-MIB DEFINITIONS ::= BEGIN
IMPORTS
private, internet, mgmt, NetworkAddress, IpAddress,
Counter, Gauge, TimeTicks, enterprises
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM SNMPv2-TC
TRAP-TYPE
FROM RFC-1215 ;
asentria OBJECT IDENTIFIER ::= { enterprises 3052 }
--1.3.6.1.4.1.3052
s412 OBJECT IDENTIFIER ::= { asentria 41 }
--1.3.6.1.4.1.3052.41
device OBJECT IDENTIFIER ::= { s412 1 }
--1.3.6.1.4.1.3052.41.1
contacts OBJECT IDENTIFIER ::= { s412 2 }
--1.3.6.1.4.1.3052.41.2
relays OBJECT IDENTIFIER ::= { s412 3 }
--1.3.6.1.4.1.3052.41.3
tempsensor OBJECT IDENTIFIER ::= { s412 4 }
--1.3.6.1.4.1.3052.41.4
humiditysensor OBJECT IDENTIFIER ::= { s412 5 }
--1.3.6.1.4.1.3052.41.5
passthrough OBJECT IDENTIFIER ::= { s412 6 }
--1.3.6.1.4.1.3052.41.6
ftp OBJECT IDENTIFIER ::= { s412 7 }
--1.3.6.1.4.1.3052.41.7
analog OBJECT IDENTIFIER ::= { s412 8 }
--1.3.6.1.4.1.3052.41.8
eventSensorStatus OBJECT IDENTIFIER ::= { s412 10 }
--1.3.6.1.4.1.3052.41.10
eventSensorConfig OBJECT IDENTIFIER ::= { s412 11 }
--1.3.6.1.4.1.3052.41.11
techsupport OBJECT IDENTIFIER ::= { s412 99 }
--1.3.6.1.4.1.3052.41.99
mibend OBJECT IDENTIFIER ::= { s412 100 }
--1.3.6.1.4.1.3052.41.100
contact1 OBJECT IDENTIFIER ::= { contacts 1 }
--1.3.6.1.4.1.3052.41.2.1
contact2 OBJECT IDENTIFIER ::= { contacts 2 }
--1.3.6.1.4.1.3052.41.2.2
contact3 OBJECT IDENTIFIER ::= { contacts 3 }
--1.3.6.1.4.1.3052.41.2.3
contact4 OBJECT IDENTIFIER ::= { contacts 4 }
--1.3.6.1.4.1.3052.41.2.4
contact5 OBJECT IDENTIFIER ::= { contacts 5 }
--1.3.6.1.4.1.3052.41.2.5
contact6 OBJECT IDENTIFIER ::= { contacts 6 }
--1.3.6.1.4.1.3052.41.2.6
relay1 OBJECT IDENTIFIER ::= { relays 1 }
--1.3.6.1.4.1.3052.41.3.1
relay2 OBJECT IDENTIFIER ::= { relays 2 }
--1.3.6.1.4.1.3052.41.3.2
analog1 OBJECT IDENTIFIER ::= { analog 1 }
--1.3.6.1.4.1.3052.41.8.1
analog2 OBJECT IDENTIFIER ::= { analog 2 }
--1.3.6.1.4.1.3052.41.8.2
-- device section
serialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"8-character serial number"
::= { device 1 }
--1.3.6.1.4.1.3052.41.1.1
firmwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Firmware version text string"
::= { device 2 }
--1.3.6.1.4.1.3052.41.1.2
siteID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Site Identifier, up to 12 characters."
::= { device 3 }
--1.3.6.1.4.1.3052.41.1.3
snmpManager OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This is snmp manager #1 "
::= { device 4 }
--1.3.6.1.4.1.3052.41.1.4
forceTraps OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Any write non-zero forces set of traps to be send to the SNMP Manager"
::= { device 6 }
--1.3.6.1.4.1.3052.41.1.6
thisTrapText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A text string included in all traps"
::= { device 7 }
--1.3.6.1.4.1.3052.41.1.7
alarmStatus OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text status of all alarms"
::= { device 8 }
--1.3.6.1.4.1.3052.41.1.8
snmpManager1 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP manager #1 "
::= { device 9 }
--1.3.6.1.4.1.3052.41.1.9
snmpManager2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP manager #2 "
::= { device 10 }
--1.3.6.1.4.1.3052.41.1.10
snmpManager3 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP manager #3 "
::= { device 11 }
--1.3.6.1.4.1.3052.41.1.11
snmpManager4 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP manager #4 "
::= { device 12 }
--1.3.6.1.4.1.3052.41.1.12
statusRepeatHours OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0=none, 1-24 Number of Hours between Status Traps being Sent"
::= { device 13 }
--1.3.6.1.4.1.3052.41.1.13
serialTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"5-30, Minutes of non-activity timeout on serial setup"
::= { device 14 }
--1.3.6.1.4.1.3052.41.1.14
powerupTrapsend OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no, 1-yes, send traps for all sensors on powerup"
::= { device 15 }
--1.3.6.1.4.1.3052.41.1.15
netlossTrapsend OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no, 1-yes, send traps for detected netloss and back up"
::= { device 16 }
--1.3.6.1.4.1.3052.41.1.16
buildID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"5-chars max text for build identifier"
::= { device 17 }
--1.3.6.1.4.1.3052.41.1.17
-- contacts section
contact1Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for contact, up to 30 characters"
::= { contact1 1 }
--1.3.6.1.4.1.3052.41.2.1.1
contact1State OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current State of Contact, 0-open 1-closed"
::= { contact1 2 }
--1.3.6.1.4.1.3052.41.2.1.2
contact1AlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-alarms disabled 1-alarms enabled"
::= { contact1 3 }
--1.3.6.1.4.1.3052.41.2.1.3
contact1ActiveDirection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-alarm on open 1-alarm on closed"
::= { contact1 4 }
--1.3.6.1.4.1.3052.41.2.1.4
contact1Threshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of seconds that the contact must remain in a state before generating a trap, range 0-255"
::= { contact1 5 }
--1.3.6.1.4.1.3052.41.2.1.5
contact1ReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-return to normal traps not sent, 1-sent"
::= { contact1 6 }
--1.3.6.1.4.1.3052.41.2.1.6
contact1TrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats. 1-255 number of minutes between repeats of alarm traps."
::= { contact1 7 }
--1.3.6.1.4.1.3052.41.2.1.7
contact1Severity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1-minor 2-major 3-critical 4-severe 5-warning"
::= { contact1 8 }
--1.3.6.1.4.1.3052.41.2.1.8
contact2Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for contact, up to 30 characters"
::= { contact2 1 }
--1.3.6.1.4.1.3052.41.2.2.1
contact2State OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current State of Contact, 0-open 1-closed"
::= { contact2 2 }
--1.3.6.1.4.1.3052.41.2.2.2
contact2AlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no alarms 1-alarms enabled"
::= { contact2 3 }
--1.3.6.1.4.1.3052.41.2.2.3
contact2ActiveDirection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-alarm on open 1-alarm on closed"
::= { contact2 4 }
--1.3.6.1.4.1.3052.41.2.2.4
contact2Threshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of seconds must be in a state to be 'open' or 'closed'"
::= { contact2 5 }
--1.3.6.1.4.1.3052.41.2.2.5
contact2ReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-sent"
::= { contact2 6 }
--1.3.6.1.4.1.3052.41.2.2.6
contact2TrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats. 1-255 number of minutes between repeats of alarm traps"
::= { contact2 7 }
--1.3.6.1.4.1.3052.41.2.2.7
contact2Severity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1-minor 2-major 3-critical 4-severe 5-warning"
::= { contact2 8 }
--1.3.6.1.4.1.3052.41.2.2.8
contact3Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for contact, up to 30 characters"
::= { contact3 1 }
--1.3.6.1.4.1.3052.41.2.3.1
contact3State OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current State of Contact, 0-open 1-closed"
::= { contact3 2 }
--1.3.6.1.4.1.3052.41.2.3.2
contact3AlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no alarms 1-alarms enabled"
::= { contact3 3 }
--1.3.6.1.4.1.3052.41.2.3.3
contact3ActiveDirection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-alarm on open 1-alarm on closed"
::= { contact3 4 }
--1.3.6.1.4.1.3052.41.2.3.4
contact3Threshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of seconds must be in a state to be 'open' or 'closed'"
::= { contact3 5 }
--1.3.6.1.4.1.3052.41.2.3.5
contact3ReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-sent"
::= { contact3 6 }
--1.3.6.1.4.1.3052.41.2.3.6
contact3TrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats. 1-255 number of minutes between repeats of alarm traps"
::= { contact3 7 }
--1.3.6.1.4.1.3052.41.2.3.7
contact3Severity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1-minor 2-major 3-critical 4-severe 5-warning"
::= { contact3 8 }
--1.3.6.1.4.1.3052.41.2.3.8
contact4Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for contact, up to 30 characters"
::= { contact4 1 }
--1.3.6.1.4.1.3052.41.2.4.1
contact4State OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current State of Contact, 0-open 1-closed"
::= { contact4 2 }
--1.3.6.1.4.1.3052.41.2.4.2
contact4AlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no alarms 1-alarms enabled"
::= { contact4 3 }
--1.3.6.1.4.1.3052.41.2.4.3
contact4ActiveDirection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-alarm on open 1-alarm on closed"
::= { contact4 4 }
--1.3.6.1.4.1.3052.41.2.4.4
contact4Threshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of seconds must be in a state to be 'open' or 'closed'"
::= { contact4 5 }
--1.3.6.1.4.1.3052.41.2.4.5
contact4ReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-sent"
::= { contact4 6 }
--1.3.6.1.4.1.3052.41.2.4.6
contact4TrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats. 1-255 number of minutes between repeats of alarm traps"
::= { contact4 7 }
--1.3.6.1.4.1.3052.41.2.4.7
contact4Severity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1-minor 2-major 3-critical 4-severe 5-warning"
::= { contact4 8 }
--1.3.6.1.4.1.3052.41.2.4.8
contact5Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for contact, up to 30 characters"
::= { contact5 1 }
--1.3.6.1.4.1.3052.41.2.5.1
contact5State OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current State of Contact, 0-open 1-closed"
::= { contact5 2 }
--1.3.6.1.4.1.3052.41.2.5.2
contact5AlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no alarms 1-alarms enabled"
::= { contact5 3 }
--1.3.6.1.4.1.3052.41.2.5.3
contact5ActiveDirection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-alarm on open 1-alarm on closed"
::= { contact5 4 }
--1.3.6.1.4.1.3052.41.2.5.4
contact5Threshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of seconds must be in a state to be 'open' or 'closed'"
::= { contact5 5 }
--1.3.6.1.4.1.3052.41.2.5.5
contact5ReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-sent"
::= { contact5 6 }
--1.3.6.1.4.1.3052.41.2.5.6
contact5TrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats. 1-255 number of minutes between repeats of alarm traps"
::= { contact5 7 }
--1.3.6.1.4.1.3052.41.2.5.7
contact5Severity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1-minor 2-major 3-critical 4-severe 5-warning"
::= { contact5 8 }
--1.3.6.1.4.1.3052.41.2.5.8
contact6Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for contact, up to 30 characters"
::= { contact6 1 }
--1.3.6.1.4.1.3052.41.2.6.1
contact6State OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current State of Contact, 0-open 1-closed"
::= { contact6 2 }
--1.3.6.1.4.1.3052.41.2.6.2
contact6AlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no alarms 1-alarms enabled"
::= { contact6 3 }
--1.3.6.1.4.1.3052.41.2.6.3
contact6ActiveDirection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-alarm on open 1-alarm on closed"
::= { contact6 4 }
--1.3.6.1.4.1.3052.41.2.6.4
contact6Threshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of seconds must be in a state to be 'open' or 'closed'"
::= { contact6 5 }
--1.3.6.1.4.1.3052.41.2.6.5
contact6ReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-sent"
::= { contact6 6 }
--1.3.6.1.4.1.3052.41.2.6.6
contact6TrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats. 1-255 number of minutes between repeats of alarm traps."
::= { contact6 7 }
--1.3.6.1.4.1.3052.41.2.6.7
contact6Severity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1-minor 2-major 3-critical 4-severe 5-warning"
::= { contact6 8 }
--1.3.6.1.4.1.3052.41.2.6.8
-- relays section
relay1Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for relay, up to 30 characters"
::= { relay1 1 }
--1.3.6.1.4.1.3052.41.3.1.1
relay1CurrentState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-opened, 1-closed"
::= { relay1 2 }
--1.3.6.1.4.1.3052.41.3.1.2
relay1PowerupState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-opened, 1-closed"
::= { relay1 3 }
--1.3.6.1.4.1.3052.41.3.1.3
relay2Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for relay, up to 30 characters"
::= { relay2 1 }
--1.3.6.1.4.1.3052.41.3.2.1
relay2CurrentState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-opened, 1-closed"
::= { relay2 2 }
--1.3.6.1.4.1.3052.41.3.2.2
relay2PowerupState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-opened, 1-closed"
::= { relay2 3 }
--1.3.6.1.4.1.3052.41.3.2.3
-- temp sensor section
tempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current Temperature Value, in C or F based on 1.3.6.1.4.1.3052.41.4.10"
::= { tempsensor 1 }
--1.3.6.1.4.1.3052.41.4.1
tempAlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0=alarms disabled, 1=alarms enabled"
::= { tempsensor 2 }
--1.3.6.1.4.1.3052.41.4.2
tempHighLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the High alarm goes active"
::= { tempsensor 3 }
--1.3.6.1.4.1.3052.41.4.3
tempVeryHighLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Very High alarm goes active"
::= { tempsensor 4 }
--1.3.6.1.4.1.3052.41.4.4
tempLowLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Low alarm goes active"
::= { tempsensor 5 }
--1.3.6.1.4.1.3052.41.4.5
tempVeryLowLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Very Low alarm goes active"
::= { tempsensor 6 }
--1.3.6.1.4.1.3052.41.4.6
tempAlarmThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Seconds must be in a range to be an alarm"
::= { tempsensor 7 }
--1.3.6.1.4.1.3052.41.4.7
tempReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-send trap on return to normal range"
::= { tempsensor 8 }
--1.3.6.1.4.1.3052.41.4.8
tempTrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats. 1-255 number of minutes between repeats of alarm traps."
::= { tempsensor 9 }
--1.3.6.1.4.1.3052.41.4.9
tempMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0=all temp readings and levels in degrees F, 1=in degrees C"
::= { tempsensor 10 }
--1.3.6.1.4.1.3052.41.4.10
tempHighSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"High Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { tempsensor 11 }
--1.3.6.1.4.1.3052.41.4.11
tempVeryHighSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Very High Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { tempsensor 12 }
--1.3.6.1.4.1.3052.41.4.12
tempLowSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Low Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { tempsensor 13 }
--1.3.6.1.4.1.3052.41.4.13
tempVeryLowSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Very Low Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { tempsensor 14 }
--1.3.6.1.4.1.3052.41.4.14
tempName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for temperature sensor, up to 30 characters"
::= { tempsensor 15 }
--1.3.6.1.4.1.3052.41.4.15
-- humidity sensor section
humidityValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current Relative Humidity Value (0-100%)"
::= { humiditysensor 1 }
--1.3.6.1.4.1.3052.41.5.1
humidityAlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0=alarms disabled, 1=alarms enabled"
::= { humiditysensor 2 }
--1.3.6.1.4.1.3052.41.5.2
humidityHighLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the High alarm goes active"
::= { humiditysensor 3 }
--1.3.6.1.4.1.3052.41.5.3
humidityVeryHighLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Very High alarm goes active"
::= { humiditysensor 4 }
--1.3.6.1.4.1.3052.41.5.4
humidityLowLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Low alarm goes active"
::= { humiditysensor 5 }
--1.3.6.1.4.1.3052.41.5.5
humidityVeryLowLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Very Low alarm goes active"
::= { humiditysensor 6 }
--1.3.6.1.4.1.3052.41.5.6
humidityAlarmThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Seconds must be in a range to be an alarm"
::= { humiditysensor 7 }
--1.3.6.1.4.1.3052.41.5.7
humidityReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-send trap on return to normal range"
::= { humiditysensor 8 }
--1.3.6.1.4.1.3052.41.5.8
humidityTrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats. 1-255 number of minutes between repeats of alarm traps."
::= { humiditysensor 9 }
--1.3.6.1.4.1.3052.41.5.9
humidityHighSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"High Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { humiditysensor 10 }
--1.3.6.1.4.1.3052.41.5.10
humidityVeryHighSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Very High Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { humiditysensor 11 }
--1.3.6.1.4.1.3052.41.5.11
humidityLowSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Low Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { humiditysensor 12 }
--1.3.6.1.4.1.3052.41.5.12
humidityVeryLowSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Very Low Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { humiditysensor 13 }
--1.3.6.1.4.1.3052.41.5.13
humidityName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for humidity sensor, up to 30 characters"
::= { humiditysensor 14 }
--1.3.6.1.4.1.3052.41.5.14
-- passthrough section
ptNeedPassword OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no 1-yes, is password required for passthrough connection."
::= { passthrough 1 }
--1.3.6.1.4.1.3052.41.6.1
ptSayLoginText OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no 1-yes, is passthrough login text displayed on connection."
::= { passthrough 2 }
--1.3.6.1.4.1.3052.41.6.2
ptLoginText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-24 char string which may be displayed on socket connection.
Requires that ptSayLoginText be enabled to display this string."
::= { passthrough 3 }
--1.3.6.1.4.1.3052.41.6.3
ptSaySiteID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no 1-yes, is SiteID displayed on pass through connection."
::= { passthrough 4 }
--1.3.6.1.4.1.3052.41.6.4
ptUsername OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-16 char string for Username used in serial passthrough connections"
::= { passthrough 5 }
--1.3.6.1.4.1.3052.41.6.5
ptPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-16 char string for Password used in serial passthrough connections"
::= { passthrough 6 }
--1.3.6.1.4.1.3052.41.6.6
ptTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"number of minutes (1-255) of idle activity (both directions) which causes disconnect. 0-never"
::= { passthrough 7 }
--1.3.6.1.4.1.3052.41.6.7
ptEscChar OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ASCII character code (e.g, Escape=27) which if entered on the tcp port three times
in a row causes disconnect. 0-none"
::= { passthrough 8 }
--1.3.6.1.4.1.3052.41.6.8
ptLfstripToPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no 1-yes linefeed characters received on TCP connection are removed from stream to serial port"
::= { passthrough 9 }
--1.3.6.1.4.1.3052.41.6.9
ptLfstripFromPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no 1-yes linefeed characters received on serial port are removed from stream to TCP connection"
::= { passthrough 10 }
--1.3.6.1.4.1.3052.41.6.10
ptSerialBaudrate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"300 600 1200 2400 4800 9600 19200 baud are allowed values"
::= { passthrough 11 }
--1.3.6.1.4.1.3052.41.6.11
ptSerialWordlength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"7 or 8 bit word selection"
::= { passthrough 12 }
--1.3.6.1.4.1.3052.41.6.12
ptSerialParity OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"N E O are allowed values for parity (none, even, odd) [a single-character string]"
::= { passthrough 13 }
--1.3.6.1.4.1.3052.41.6.13
ptTCPPortnumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP port number for passthrough connection (range 1024-65534)"
::= { passthrough 14 }
--1.3.6.1.4.1.3052.41.6.14
-- ftp branch
ftpUsername OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-16 char string for Username used in ftp server for updates"
::= { ftp 1 }
--1.3.6.1.4.1.3052.41.7.1
ftpPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-16 char string for Password used in ftp server for updates"
::= { ftp 2 }
--1.3.6.1.4.1.3052.41.7.2
-- analog sensor section
analog1Value OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Value of current analog reading, in 1/100 volt, +- 9999 range"
::= { analog1 1 }
--1.3.6.1.4.1.3052.41.8.1.1
analog1AlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0=no alarms, 1=send alarms"
::= { analog1 2 }
--1.3.6.1.4.1.3052.41.8.1.2
analog1HighLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the High alarm goes active"
::= { analog1 3 }
--1.3.6.1.4.1.3052.41.8.1.3
analog1VeryHighLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Very High alarm goes active"
::= { analog1 4 }
--1.3.6.1.4.1.3052.41.8.1.4
analog1LowLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Low alarm goes active"
::= { analog1 5 }
--1.3.6.1.4.1.3052.41.8.1.5
analog1VeryLowLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Very Low alarm goes active"
::= { analog1 6 }
--1.3.6.1.4.1.3052.41.8.1.6
analog1AlarmThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Seconds must be in a range to be an alarm"
::= { analog1 7 }
--1.3.6.1.4.1.3052.41.8.1.7
analog1ReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-send trap on return to normal range"
::= { analog1 8 }
--1.3.6.1.4.1.3052.41.8.1.8
analog1TrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats else number of minutes between repeats of trap"
::= { analog1 9 }
--1.3.6.1.4.1.3052.41.8.1.9
analog1HighSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"High Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { analog1 10 }
--1.3.6.1.4.1.3052.41.8.1.10
analog1VeryHighSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Very High Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { analog1 11 }
--1.3.6.1.4.1.3052.41.8.1.11
analog1LowSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Low Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { analog1 12 }
--1.3.6.1.4.1.3052.41.8.1.12
analog1VeryLowSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Very Low Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { analog1 13 }
--1.3.6.1.4.1.3052.41.8.1.13
analog1Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for analog sensor 1, up to 30 characters"
::= { analog1 14 }
--1.3.6.1.4.1.3052.41.8.1.14
analog2Value OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Value of current analog reading, in 1/100 volt, +- 9999 range"
::= { analog2 1 }
--1.3.6.1.4.1.3052.41.8.2.1
analog2AlarmEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0=no alarms, 1=send alarms"
::= { analog2 2 }
--1.3.6.1.4.1.3052.41.8.2.2
analog2HighLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the High alarm goes active"
::= { analog2 3 }
--1.3.6.1.4.1.3052.41.8.2.3
analog2VeryHighLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Very High alarm goes active"
::= { analog2 4 }
--1.3.6.1.4.1.3052.41.8.2.4
analog2LowLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Low alarm goes active"
::= { analog2 5 }
--1.3.6.1.4.1.3052.41.8.2.5
analog2VeryLowLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Level at which the Very Low alarm goes active"
::= { analog2 6 }
--1.3.6.1.4.1.3052.41.8.2.6
analog2AlarmThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Seconds must be in a range to be an alarm"
::= { analog2 7 }
--1.3.6.1.4.1.3052.41.8.2.7
analog2ReturnNormalTrap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-not sent, 1-send trap on return to normal range"
::= { analog2 8 }
--1.3.6.1.4.1.3052.41.8.2.8
analog2TrapRepeat OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0-no repeats else number of minutes between repeats of trap"
::= { analog2 9 }
--1.3.6.1.4.1.3052.41.8.2.9
analog2HighSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"High Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { analog2 10 }
--1.3.6.1.4.1.3052.41.8.2.10
analog2VeryHighSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Very High Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { analog2 11 }
--1.3.6.1.4.1.3052.41.8.2.11
analog2LowSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Low Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { analog2 12 }
--1.3.6.1.4.1.3052.41.8.2.12
analog2VeryLowSeverity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Very Low Level Severity 1-minor 2-major 3-critical 4-severe 5-warning"
::= { analog2 13 }
--1.3.6.1.4.1.3052.41.8.2.13
analog2Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name for analog sensor 2, up to 30 characters"
::= { analog2 14 }
--1.3.6.1.4.1.3052.41.8.2.14
-- voltage section
-- ES status section
esPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF ESPoint
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"
This table organizes 4 basic attributes of points. A point
is a particular sensor on an EventSensor (e.g., temperature,
humidity, contact closure 2, relay 5, etc.). The 4 point
attributes are its name, whether it's in its event state,
the point's value as a number and its value as a string.
Points are referenced by a point index. The point index
is a string of 3 numbers separated by periods.
It contains all the information necessary for getting a piece
of data off an event sensor; namely, which EventSensor,
point class, and which-sensor-of-that-class (a.k.a. point).
"
::= { eventSensorStatus 1 }
--1.3.6.1.4.1.3052.41.10.1
esPointEntry OBJECT-TYPE
SYNTAX ESPoint
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for EventSensor point table"
INDEX { esIndexES, esIndexPC, esIndexPoint }
::= { esPointTable 1 }
--1.3.6.1.4.1.3052.41.10.1.1
esIndexES OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The part of the point index that refers to an
EventSensor.
The point index is a string of 3 numbers separated
by periods. It contains all the information
necessary for getting a piece of data off an event
sensor; namely, which EventSensor, point class,
and which-sensor-of-that-class (a.k.a. point).
This object's allowable values are 1 through 4,
which refer to attached EventSensors.
The number corresponding to an EventSensor is
determined by the user at the initial configuration
time. If there is an internal sensor in the unit,
it will always be the first item in the Sensor
Events setup menu.
For example, if a new EventSensor is configured as
the 2nd entry AFTER the internal EventSensor (if
one exists) in the Sensor Events Setup Menu, then
that EventSensor will be known from then on as
EventSensor 2. All point indeces with esIndexES=2
will now refer to that particular EventSensor.
"
::= { esPointEntry 1 }
--1.3.6.1.4.1.3052.41.10.1.1.1
esIndexPC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The part of the point index that refers to point class.
The point index is a string of 3 numbers separated by periods.
It contains all the information necessary for getting a piece
of data off an event sensor; namely, which EventSensor,
point class, and which-sensor-of-that-class (a.k.a. point).
The values for this object are:
1=temperature sensor
2=contact closure
3=humidity sensor
4=noise sensor
5=analog input
6=relay
"
::= { esPointEntry 2 }
--1.3.6.1.4.1.3052.41.10.1.1.2
esIndexPoint OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The part of the point index that delineates which
sensor on the EventSensor.
So this combined with esIndexPC (Point Class or type)
and esIndexES (which EventSensor) uniquely defines each
point (sensor or relay) attached to a unit. For
example, if esIndexES is 3, esIndexPC is 1 and
esIndexPoint is 4 then this is the Fourth Temperature
Sensor on EventSensor number 3."
::= { esPointEntry 3 }
--1.3.6.1.4.1.3052.41.10.1.1.3
esPointName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the point on an EventSensor. For example,
'AC temp' (in the case of the temperature sensor on an
EventSensor).
There can be multiple points of the same point class on an
EventSensor (e.g., 8 contact closures) and multiple sensor
classes on an EventSensor (e.g., temperature, contact closure,
humidity).
If the point referenced by a given point index is solitary
(e.g., temperature sensor, because there can be only one on
an EventSensor), then this object reads as '<EventSensor
name>'. Setting this object for solitary point indices sets
the EventSensor name only.
On the other hand, if a given point is among other points of
the same point class on an EventSensor, then this object reads
as '<Sensor name>'. Setting this object for these NON-
solitary point indices sets the sensor name only - not the
EventSensor name."
::= { esPointEntry 4 }
--1.3.6.1.4.1.3052.41.10.1.1.4
esPointInEventState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number referring to the event state of a point
on an EventSensor. This number can have different
meanings depending on the point class.
If the point class is temperature, humidity, or
analog input, then the values of this object are:
1=very low
2=low
3=normal
4=high
5=very high
For contact closures and relays the values of this
object are:
1=point in event state
2=point in normal state
For any point class and any point, if the event
state is undefined, then the value of this object
is 0.
For any point class except relay, this object is
read-only. For relays, setting this object to 1
puts the relay into its open state.
Setting it to 2 puts the relay into its closed
state.
"
::= { esPointEntry 5 }
--1.3.6.1.4.1.3052.41.10.1.1.5
esPointValueInt OBJECT-TYPE
SYNTAX INTEGER (-32768..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number referring to the value of a point on an
EventSensor.
If the point class is temperature, then this object
is the temperature in its configured scale (default
is Fahrenheit).
If the point class is contact closure or relay, then
this object is either 0 (open) or 1 (closed).
If the point class is humidity, then this object
is the percent relative humidity.
If the point class is analog input, then this
object is the signed input value in tenths of the
configured units.
For any point class except relay, this object is
read-only. For relays, setting this object to 1
closes the relay, while setting it to 0 opens it.
This works regardless of the control mode of the
relay.
"
::= { esPointEntry 6 }
--1.3.6.1.4.1.3052.41.10.1.1.6
esPointValueStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string referring to the value of a point on an
EventSensor.
For contact closures and relays this object is
either 'Open' or 'Closed'.
For temperature and humidity point classes, this
object is the string representation of the
esPointValueInt object. For temperature, 'C' or
'F' is including in the string to indicate scale.
For analog inputs, this object is the string
representation of the plus/minus input in volts.
"
::= { esPointEntry 7 }
--1.3.6.1.4.1.3052.41.10.1.1.7
-- ES config section
esNumberEventSensors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of EventSensors recognized by the s412
Range: 0-4"
::= { eventSensorConfig 1 }
--1.3.6.1.4.1.3052.41.11.1
esTable OBJECT-TYPE
SYNTAX SEQUENCE OF ESExist
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of what EventSensors are attached to the unit"
::= { eventSensorConfig 2 }
--1.3.6.1.4.1.3052.41.11.2
esEntry OBJECT-TYPE
SYNTAX ESExist
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for EventSensor table"
INDEX { esIndex }
::= { esTable 1 }
--1.3.6.1.4.1.3052.41.11.2.1
esIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This number refers to an EventSensor; it has the
same meaning as the esIndexES object (see above),
except that this object is used only within the
esTable branch.
This object's allowable values are 1 through 4,
which refer to additional attached EventSensors.
The number corresponding to an EventSensor is
determined by the user at the initial configuration
time.
"
::= { esEntry 1 }
--1.3.6.1.4.1.3052.41.11.2.1.1
esID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The factory-assigned ID of the EventSensor"
::= { esEntry 2 }
--1.3.6.1.4.1.3052.41.11.2.1.2
esNumberTempSensors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of temperature sensors on the EventSensor"
::= { esEntry 3 }
--1.3.6.1.4.1.3052.41.11.2.1.3
esTempReportingMode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of how temperature values should
be interpreted."
::= { esEntry 4 }
--1.3.6.1.4.1.3052.41.11.2.1.4
esNumberCCs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of contact closures on the EventSensor."
::= { esEntry 5 }
--1.3.6.1.4.1.3052.41.11.2.1.5
esCCReportingMode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of how CC values should be interpreted."
::= { esEntry 6 }
--1.3.6.1.4.1.3052.41.11.2.1.6
esNumberHumidSensors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of humidity sensors on the EventSensor."
::= { esEntry 7 }
--1.3.6.1.4.1.3052.41.11.2.1.7
esHumidReportingMode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of how humidity sensor values should be
interpreted."
::= { esEntry 8 }
--1.3.6.1.4.1.3052.41.11.2.1.8
esNumberAnalog OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of analog inputs on the EventSensor."
::= { esEntry 13 }
--1.3.6.1.4.1.3052.41.11.2.1.13
esAnalogReportingMode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of how analog input values should be
interpreted."
::= { esEntry 14 }
--1.3.6.1.4.1.3052.41.11.2.1.14
esNumberRelayOutputs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of relay outputs on the EventSensor"
::= { esEntry 15 }
--1.3.6.1.4.1.3052.41.11.2.1.15
esRelayReportingMode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of how relay output values
should be interpreted."
::= { esEntry 16 }
--1.3.6.1.4.1.3052.41.11.2.1.16
-- tech support (and windows setup application) section
-- requires special community name for writes
techsupportIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"May read or Set IP Address, takes effect on restart"
::= { techsupport 1 }
--1.3.6.1.4.1.3052.41.99.1
techsupportNetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"May read or Set NetMask, takes effect on restart"
::= { techsupport 2 }
--1.3.6.1.4.1.3052.41.99.2
techsupportRouter OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"May read or Set Router IP Address, takes effect on restart"
::= { techsupport 3 }
--1.3.6.1.4.1.3052.41.99.3
techsupportRestart OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reads as 0, any Write resets unit so new IP, Netmask, Router may be used"
::= { techsupport 4 }
--1.3.6.1.4.1.3052.41.99.4
techsupportVersionNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Version Number of Firmware"
::= { techsupport 5 }
--1.3.6.1.4.1.3052.41.99.5
mibendObject OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An object after all active mib items, to help some managers compile"
::= { mibend 1 }
--1.3.6.1.4.1.3052.41.100.1
-- object definitions
ESPoint ::=
SEQUENCE {
esIndexES
INTEGER,
esIndexPC
INTEGER,
esIndexPoint
INTEGER,
esPointName
DisplayString,
esPointInEventState
INTEGER,
esPointValueInt
INTEGER,
esPointValueStr
DisplayString
}
ESExist ::=
SEQUENCE {
esIndex
INTEGER,
esID
DisplayString,
esNumberTempSensors
INTEGER,
esTempReportingMode
DisplayString,
esNumberCCs
INTEGER,
esCCReportingMode
DisplayString,
esNumberHumidSensors
INTEGER,
esHumidReportingMode
DisplayString,
esNumberAnalog
INTEGER,
esAnalogReportingMode
DisplayString,
esNumberRelayOutputs
INTEGER,
esRelayReportingMode
DisplayString
}
-- end of MIB objects
-- TRAP DEFINITIONS
contact1ActiveTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact1Name, contact1State }
DESCRIPTION
"Sent to show Contact 1 is in the alarm state"
::= 20001
contact2ActiveTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact2Name, contact2State }
DESCRIPTION
"Sent to show Contact 2 is in the alarm state"
::= 20002
contact3ActiveTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact3Name, contact3State }
DESCRIPTION
"Sent to show Contact 3 is in the alarm state"
::= 20003
contact4ActiveTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact4Name, contact4State }
DESCRIPTION
"Sent to show Contact 4 is in the alarm state"
::= 20004
contact5ActiveTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact5Name, contact5State }
DESCRIPTION
"Sent to show Contact 5 is in the alarm state"
::= 20005
contact6ActiveTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact6Name, contact6State }
DESCRIPTION
"Sent to show Contact 6 is in the alarm state"
::= 20006
tempHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, tempValue }
DESCRIPTION
"Sent to show Temp exceeded High Temp Threshold"
::= 20010
tempVeryHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, tempValue }
DESCRIPTION
"Sent to show Temp exceeded Very High Temp Threshold"
::= 20011
tempLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, tempValue }
DESCRIPTION
"Sent to show Temp went below Low Temp Threshold"
::= 20012
tempVeryLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, tempValue }
DESCRIPTION
"Sent to show Temp went below Very Low Temp Threshold"
::= 20013
humidityHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, humidityValue }
DESCRIPTION
"Sent to show humidity exceeded High humidity Threshold"
::= 20020
humidityVeryHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, humidityValue }
DESCRIPTION
"Sent to show humidity exceeded Very High humidity Threshold"
::= 20021
humidityLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, humidityValue }
DESCRIPTION
"Sent to show humidity went below Low humidity Threshold"
::= 20022
humidityVeryLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, humidityValue }
DESCRIPTION
"Sent to show humidity went below Very Low humidity Threshold"
::= 20023
analog1HighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog1Name, analog1Value }
DESCRIPTION
"Sent to show analog1 exceeded High analog1 Threshold"
::= 20030
analog1VeryHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog1Name, analog1Value }
DESCRIPTION
"Sent to show analog1 exceeded Very High analog1 Threshold"
::= 20031
analog1LowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog1Name, analog1Value }
DESCRIPTION
"Sent to show analog1 went below Low analog1 Threshold"
::= 20032
analog1VeryLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog1Name, analog1Value }
DESCRIPTION
"Sent to show analog1 went below Very Low analog1 Threshold"
::= 20033
analog2HighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog2Name, analog2Value }
DESCRIPTION
"Sent to show analog2 exceeded High analog2 Threshold"
::= 20040
analog2VeryHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog2Name, analog2Value }
DESCRIPTION
"Sent to show analog2 exceeded Very High analog2 Threshold"
::= 20041
analog2LowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog2Name, analog2Value }
DESCRIPTION
"Sent to show analog2 went below Low analog2 Threshold"
::= 20042
analog2VeryLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog2Name, analog2Value }
DESCRIPTION
"Sent to show analog2 went below Very Low analog2 Threshold"
::= 20043
contactESActiveTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show EventSensor contact is in the alarm state"
::= 20101
tempESHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show Temp exceeded High Threshold on an EventSensor"
::= 20110
tempESVeryHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show Temp exceeded Very High Threshold on an EventSensor"
::= 20111
tempESLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show Temp went below Low Threshold on an EventSensor"
::= 20112
tempESVeryLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show Temp went below Very Low Threshold on an EventSensor"
::= 20113
humidityESHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show humidity exceeded High Threshold on an EventSensor"
::= 20120
humidityESVeryHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show humidity exceeded Very High Threshold on an EventSensor"
::= 20121
humidityESLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show humidity went below Low Threshold on an EventSensor"
::= 20122
humidityESVeryLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show humidity went below Very Low Threshold on an EventSensor"
::= 20123
voltageESHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show voltage exceeded High Threshold on an EventSensor"
::= 20130
voltageESVeryHighTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show voltage exceeded Very High Threshold on an EventSensor"
::= 20131
voltageESLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show voltage went below Low Threshold on an EventSensor"
::= 20132
voltageESVeryLowTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show voltage went below Very Low Threshold on an EventSensor"
::= 20133
contact1NormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact1Name, contact1State }
DESCRIPTION
"Sent to show Contact 1 is in the normal state"
::= 21001
contact2NormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact2Name, contact2State }
DESCRIPTION
"Sent to show Contact 2 is in the normal state"
::= 21002
contact3NormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact3Name, contact3State }
DESCRIPTION
"Sent to show Contact 3 is in the normal state"
::= 21003
contact4NormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact4Name, contact4State }
DESCRIPTION
"Sent to show Contact 4 is in the normal state"
::= 21004
contact5NormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact5Name, contact5State }
DESCRIPTION
"Sent to show Contact 5 is in the normal state"
::= 21005
contact6NormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, contact6Name, contact6State }
DESCRIPTION
"Sent to show Contact 6 is in the normal state"
::= 21006
tempNormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, tempValue }
DESCRIPTION
"Sent to show Temp went back to Normal range"
::= 21010
humidityNormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, humidityValue }
DESCRIPTION
"Sent to show Humidity went back to Normal range"
::= 21020
analog1NormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog1Name, analog1Value }
DESCRIPTION
"Sent to show analog1 went back to Normal range"
::= 21030
analog2NormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, analog2Name, analog2Value }
DESCRIPTION
"Sent to show analog2 went back to Normal range"
::= 21040
contactESNormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Send to show EventSensor contact has returned to normal state"
::= 21101
tempESNormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show EventSensor Temp went back to Normal range"
::= 21110
humidityESNormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show EventSensor Humidity went back to Normal range"
::= 21120
voltageESNormalTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID, esPointName, esPointValueInt, esIndexES, esIndexPoint }
DESCRIPTION
"Sent to show EventSensor voltage went back to Normal range"
::= 21130
testTrap TRAP-TYPE
ENTERPRISE s412
VARIABLES { thisTrapText, siteID }
DESCRIPTION
"Sent for testing the SNMP interface"
::= 22000
END
View Git Blame Copy Permalink