616 lines
25 KiB
Plaintext
616 lines
25 KiB
Plaintext
--**MOD+***********************************************************************
|
|
--* Module: ARUBAWIRED-CONFIG-MIB.mib
|
|
--*
|
|
--* (c) Copyright 2021-2022 Hewlett Packard Enterprise Development LP
|
|
--* All Rights Reserved.
|
|
--*
|
|
--* The contents of this software are proprietary and confidential
|
|
--* to the Hewlett-Packard Development Company, L.P. No part of this
|
|
--* program may be photocopied, reproduced, or translated into another
|
|
--* programming language without prior written consent of the
|
|
--* Hewlett-Packard Development Company, L.P.
|
|
--*
|
|
--* Purpose: This file contains the MIB definition of ARUBAWIRED-CONFIG-MIB
|
|
--*
|
|
--**MOD-***********************************************************************
|
|
|
|
ARUBAWIRED-CONFIG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, MODULE-IDENTITY, Unsigned32, NOTIFICATION-TYPE, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
DisplayString, TEXTUAL-CONVENTION, TimeStamp, RowStatus, TruthValue
|
|
FROM SNMPv2-TC
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
wndFeatures
|
|
FROM ARUBAWIRED-NETWORKING-OID;
|
|
|
|
arubaWiredConfigurationMIB MODULE-IDENTITY
|
|
LAST-UPDATED "202108100000Z"
|
|
ORGANIZATION "HPE/Aruba Networking Division"
|
|
CONTACT-INFO "Hewlett-Packard Company
|
|
8000 Foothills Blvd.
|
|
Roseville, CA 95747"
|
|
DESCRIPTION "This MIB module contains HPE proprietary configuration MIBs."
|
|
REVISION "202108100000Z"
|
|
DESCRIPTION "Initial revision."
|
|
::= { wndFeatures 20 }
|
|
|
|
-- *************************************************************
|
|
-- Start of MIB Objects
|
|
-- *************************************************************
|
|
arubaWiredConfigurationNotifications OBJECT IDENTIFIER ::= { arubaWiredConfigurationMIB 0 }
|
|
arubaWiredConfigurationObjects OBJECT IDENTIFIER ::= { arubaWiredConfigurationMIB 1 }
|
|
arubaWiredConfigurationConformance OBJECT IDENTIFIER ::= { arubaWiredConfigurationMIB 2 }
|
|
|
|
-- *************************************************************
|
|
-- Textual conventions
|
|
-- *************************************************************
|
|
|
|
ConfigurationEventMedium ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source or destination of a configuration change,
|
|
save, or copy.
|
|
|
|
checkpoint: Automatic configuration checkpoint.
|
|
cli: Console or SSH terminal.
|
|
internal: Internal configurator.
|
|
rest: RESTful interface.
|
|
snmp: Simple Network Management Protocol.
|
|
ztp: Zero-touch provisioning.
|
|
"
|
|
SYNTAX INTEGER {
|
|
checkpoint(1),
|
|
cli(2),
|
|
internal(3),
|
|
rest(4),
|
|
snmp(5),
|
|
ztp(6)
|
|
}
|
|
|
|
ConfigurationCopyProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol file transfer protocol that should be
|
|
used to copy the configuration file over the
|
|
network. If the config file transfer is to occur
|
|
locally on the SNMP agent, the method of transfer
|
|
is left up to the implementation, and is not
|
|
restricted to the protocols below.
|
|
|
|
scp: Secure Copy Protocol
|
|
sftp: Secure File Transfer Protocol
|
|
tftp: Transfer File Transfer Protocol"
|
|
SYNTAX INTEGER {
|
|
scp(1),
|
|
sftp(2),
|
|
tftp(3)
|
|
}
|
|
|
|
ConfigurationCopyState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of a external source configuration copy operation.
|
|
The description of each state is given below:
|
|
|
|
waiting: A newly activated configuration copy request
|
|
is placed in this state.
|
|
|
|
Note: only one configuration copy request can run
|
|
at any time. If another request is issued while there
|
|
is one executing, it will fail with 'busy' as failure
|
|
cause.
|
|
running: this state signifies that the
|
|
configuration copy request is running.
|
|
successful: the state when a configuration copy request
|
|
is successfully completed.
|
|
failed: the configuration copy request was
|
|
unsuccessful."
|
|
SYNTAX INTEGER {
|
|
waiting(1),
|
|
running(2),
|
|
successful(3),
|
|
failed(4)
|
|
}
|
|
|
|
ConfigurationCopyFailureCause ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason a configuration copy request failed.
|
|
|
|
authenticationFailed: user/pass combination failed.
|
|
badFilename: bad filename/path/permissions.
|
|
busy: there is another configuration copy
|
|
operation running. Retry later.
|
|
invalidConfiguration: source config is invalid.
|
|
invalidURL: provided URL is invalid.
|
|
systemNotReady: system is not ready to copy configuration.
|
|
timeout: the network may be overloaded,
|
|
or the remote file server may not
|
|
be responding.
|
|
unknown: unknown failure.
|
|
"
|
|
SYNTAX INTEGER {
|
|
authenticationFailed(1),
|
|
badFilename(2),
|
|
busy(3),
|
|
invalidConfiguration(4),
|
|
invalidURL(5),
|
|
systemNotReady(6),
|
|
timeout(7),
|
|
unknown(8)
|
|
}
|
|
|
|
ConfigurationFileType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The various types of files on which a configuration copy
|
|
operation can be performed.
|
|
|
|
externalFile: file on another device,
|
|
e.g. a file-server on the
|
|
network or on a USB drive.
|
|
startupConfiguration: startup config.
|
|
runningConfiguration: running config.
|
|
checkpoint: non-startup user-defined checkpoint.
|
|
"
|
|
|
|
SYNTAX INTEGER {
|
|
externalFile(1),
|
|
startupConfiguration(2),
|
|
runningConfiguration(3),
|
|
checkpoint(4)
|
|
}
|
|
|
|
ConfigurationFileFormat ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration file format.
|
|
|
|
cli: Command Line Interface.
|
|
json: JavaScript Object Notation."
|
|
|
|
SYNTAX INTEGER {
|
|
cli(1),
|
|
json(2)
|
|
}
|
|
|
|
-- ************************************************************
|
|
-- Configuration copy requests table
|
|
-- ************************************************************
|
|
arubaWiredConfigurationCopy OBJECT IDENTIFIER ::= { arubaWiredConfigurationObjects 0 }
|
|
|
|
arubaWiredConfigurationCopyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArubaWiredConfigurationCopyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Contains copy configuration requests."
|
|
::= { arubaWiredConfigurationCopy 1 }
|
|
|
|
arubaWiredConfigurationCopyEntry OBJECT-TYPE
|
|
SYNTAX ArubaWiredConfigurationCopyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A configuration copy request.
|
|
|
|
A management station wishing to create an entry
|
|
should first generate a random serial number to be
|
|
used as the index to this sparse table. The station
|
|
should then create the associated instance of the
|
|
row status and row index objects. It must also,
|
|
either in the same or in successive PDUs, create an
|
|
instance of arubaWiredConfigurationCopySourceFileType and
|
|
arubaWiredConfigurationCopyDestFileType. Only one
|
|
of the source or destination file types can be 'externalFile'.
|
|
|
|
If one of the file types is a 'externalFile', the following values
|
|
are expected as well:
|
|
- arubaWiredConfigurationCopyProtocol
|
|
- arubaWiredConfigurationCopyFileName
|
|
- arubaWiredConfigurationCopyServerAddressType
|
|
- arubaWiredConfigurationCopyServerAddress
|
|
|
|
If the 'externalFile' is the destination, then a valid
|
|
arubaWiredConfigurationCopyFileFormat is required as well.
|
|
|
|
If authentication is required, then both arubaWiredConfigurationCopyUserName
|
|
and arubaWiredConfigurationCopyUserPassword are necessary.
|
|
|
|
Once the appropriate instance of all the
|
|
configuration objects have been created, either by
|
|
an explicit SNMP set request or by default, the row
|
|
status should be set to active to initiate the
|
|
request. Note that this entire procedure may be
|
|
initiated via a single set request which specifies
|
|
a row status of createAndGo as well as
|
|
specifies valid values for the non-defaulted
|
|
configuration objects.
|
|
|
|
Once the configuration copy request has been created
|
|
(i.e. the arubaWiredConfigurationCopyEntryRowStatus has been made
|
|
active), the entry cannot be modified - the only
|
|
operation possible after this is to delete the row.
|
|
|
|
Once the request completes, the management station
|
|
should retrieve the values of the status objects of
|
|
interest, and should then delete the entry. In
|
|
order to prevent old entries from clogging the
|
|
table, entries will be aged out, but an entry will
|
|
never be deleted within 5 minutes of completing."
|
|
INDEX {
|
|
arubaWiredConfigurationCopyIndex
|
|
}
|
|
::= { arubaWiredConfigurationCopyTable 1 }
|
|
|
|
ArubaWiredConfigurationCopyEntry ::= SEQUENCE {
|
|
arubaWiredConfigurationCopyIndex Unsigned32,
|
|
arubaWiredConfigurationCopySourceFileType ConfigurationFileType,
|
|
arubaWiredConfigurationCopyDestFileType ConfigurationFileType,
|
|
arubaWiredConfigurationCopyProtocol ConfigurationCopyProtocol,
|
|
arubaWiredConfigurationCheckpointName DisplayString,
|
|
arubaWiredConfigurationCopyFileFormat ConfigurationFileFormat,
|
|
arubaWiredConfigurationCopyFileName DisplayString,
|
|
arubaWiredConfigurationCopyServerAddressType InetAddressType,
|
|
arubaWiredConfigurationCopyServerAddress InetAddress,
|
|
arubaWiredConfigurationCopyUserName DisplayString,
|
|
arubaWiredConfigurationCopyUserPassword DisplayString,
|
|
arubaWiredConfigurationCopyVRFName DisplayString,
|
|
arubaWiredConfigurationCopyNotificationOnCompletion TruthValue,
|
|
arubaWiredConfigurationCopyState ConfigurationCopyState,
|
|
arubaWiredConfigurationCopyTimeStarted TimeStamp,
|
|
arubaWiredConfigurationCopyTimeCompleted TimeStamp,
|
|
arubaWiredConfigurationCopyFailureCause ConfigurationCopyFailureCause,
|
|
arubaWiredConfigurationCopyEntryRowStatus RowStatus
|
|
}
|
|
|
|
arubaWiredConfigurationCopyIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Object which specifies a unique entry in the arubaWiredConfigurationCopyTable.
|
|
A management station wishing to initiate a configuration copy operation
|
|
should use a random value for this object when creating or modifying
|
|
an instance of a ArubaWiredConfigurationCopyEntry. The RowStatus semantics of the
|
|
arubaWiredConfigurationCopyEntryRowStatus object will prevent access conflicts."
|
|
::= { arubaWiredConfigurationCopyEntry 1 }
|
|
|
|
arubaWiredConfigurationCopySourceFileType OBJECT-TYPE
|
|
SYNTAX ConfigurationFileType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of file to copy from. Either the
|
|
arubaWiredConfigurationCopySourceFileType or the
|
|
arubaWiredConfigurationCopyDestFileType (or both) must be of type:
|
|
- 'checkpoint'
|
|
- 'runningConfiguration'
|
|
- 'startupConfiguration'
|
|
|
|
The arubaWiredConfigurationCopySourceFileType
|
|
must be different from the arubaWiredConfigurationCopyDestFileType."
|
|
::= { arubaWiredConfigurationCopyEntry 2 }
|
|
|
|
arubaWiredConfigurationCopyDestFileType OBJECT-TYPE
|
|
SYNTAX ConfigurationFileType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the type of file to copy to. Either the
|
|
arubaWiredConfigurationCopySourceFileType or the
|
|
arubaWiredConfigurationCopyDestFileType (or both) must be of type:
|
|
- 'checkpoint'
|
|
- 'runningConfiguration'
|
|
- 'startupConfiguration'
|
|
|
|
The arubaWiredConfigurationCopySourceFileType
|
|
must be different from the arubaWiredConfigurationCopyDestFileType."
|
|
::= { arubaWiredConfigurationCopyEntry 3 }
|
|
|
|
arubaWiredConfigurationCopyProtocol OBJECT-TYPE
|
|
SYNTAX ConfigurationCopyProtocol
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol file transfer protocol that should be used to copy the configuration
|
|
file over the network. If the config file transfer is to occur locally on the SNMP
|
|
agent, the method of transfer is left up to the implementation."
|
|
::= { arubaWiredConfigurationCopyEntry 4 }
|
|
|
|
arubaWiredConfigurationCheckpointName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the name of the checkpoint to copy.
|
|
This object must be created when either
|
|
the arubaWiredConfigurationCopySourceFileType or
|
|
arubaWiredConfigurationCopyDestFileType has
|
|
the value 'checkpoint'."
|
|
::= { arubaWiredConfigurationCopyEntry 5 }
|
|
|
|
arubaWiredConfigurationCopyFileFormat OBJECT-TYPE
|
|
SYNTAX ConfigurationFileFormat
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"File format to be used when exporting the configuration to a
|
|
remote device.
|
|
|
|
This value is ignored unless arubaWiredConfigurationCopyDestFileType
|
|
is 'externalFile'.
|
|
"
|
|
::= { arubaWiredConfigurationCopyEntry 6 }
|
|
|
|
arubaWiredConfigurationCopyFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name (including the path, if applicable) of the file.
|
|
This object must be created when either
|
|
the arubaWiredConfigurationCopySourceFileType or
|
|
arubaWiredConfigurationCopyDestFileType has
|
|
the value 'externalFile'."
|
|
::= { arubaWiredConfigurationCopyEntry 7 }
|
|
|
|
arubaWiredConfigurationCopyServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the transport type of the address contained in
|
|
arubaWiredConfigurationCopyServerAddress object. This must be created when either the
|
|
arubaWiredConfigurationCopySourceFileType or arubaWiredConfigurationCopyDestFileType
|
|
has the value 'externalFile'."
|
|
::= { arubaWiredConfigurationCopyEntry 8 }
|
|
|
|
arubaWiredConfigurationCopyServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network address of the remote server from (or to) which to copy
|
|
the configuration. This object must be created when either the
|
|
arubaWiredConfigurationCopySourceFileType or arubaWiredConfigurationCopyDestFileType
|
|
has the value 'externalFile'.
|
|
|
|
All bits as 0s or 1s for arubaWiredConfigurationCopyServerAddress are not allowed.
|
|
|
|
The format of this address depends on the value of the
|
|
arubaWiredConfigurationCopyServerAddressType object."
|
|
::= { arubaWiredConfigurationCopyEntry 9 }
|
|
|
|
arubaWiredConfigurationCopyUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote username for copy via the protocol stated in arubaWiredConfigurationCopyProtocol."
|
|
::= { arubaWiredConfigurationCopyEntry 10 }
|
|
|
|
arubaWiredConfigurationCopyUserPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..40))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote password for copy via the protocol stated in arubaWiredConfigurationCopyProtocol.
|
|
This object must be created when the arubaWiredConfigurationCopyProtocol is:
|
|
- scp
|
|
- sftp
|
|
|
|
Reading it returns a zero-length string for security
|
|
reasons."
|
|
::= { arubaWiredConfigurationCopyEntry 11 }
|
|
|
|
arubaWiredConfigurationCopyVRFName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote vrf name for copy via the protocol stated in arubaWiredConfigurationCopyProtocol."
|
|
::= { arubaWiredConfigurationCopyEntry 12 }
|
|
|
|
arubaWiredConfigurationCopyNotificationOnCompletion OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether or not a arubaWiredConfigurationCopyCompletion
|
|
notification should be issued on completion of the
|
|
configuration transfer. If such a notification is desired,
|
|
it is the responsibility of the management entity to
|
|
ensure that the SNMP administrative model is
|
|
configured in such a way as to allow the
|
|
notification to be delivered."
|
|
DEFVAL { false }
|
|
::= { arubaWiredConfigurationCopyEntry 13 }
|
|
|
|
arubaWiredConfigurationCopyState OBJECT-TYPE
|
|
SYNTAX ConfigurationCopyState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the state of this configuration copy request.
|
|
This value of this object is instantiated only after
|
|
the row has been instantiated, i.e. after the
|
|
arubaWiredConfigurationCopyEntryRowStatus has been made active."
|
|
::= { arubaWiredConfigurationCopyEntry 14 }
|
|
|
|
arubaWiredConfigurationCopyTimeStarted OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the time the arubaWiredConfigurationCopyState last
|
|
transitioned to 'running', or 0 if the state has
|
|
never transitioned to 'running' (e.g., stuck in
|
|
'waiting' state).
|
|
|
|
This object is instantiated only after the row has
|
|
been instantiated."
|
|
::= { arubaWiredConfigurationCopyEntry 15 }
|
|
|
|
arubaWiredConfigurationCopyTimeCompleted OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the time the arubaWiredConfigurationCopyState last
|
|
transitioned from 'running' to 'successful' or
|
|
'failed' states.
|
|
|
|
This object is instantiated only
|
|
after the row has been instantiated.
|
|
Its value will remain 0 until the request has
|
|
completed."
|
|
::= { arubaWiredConfigurationCopyEntry 16 }
|
|
|
|
arubaWiredConfigurationCopyFailureCause OBJECT-TYPE
|
|
SYNTAX ConfigurationCopyFailureCause
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason why the configuration copy operation failed.
|
|
This object is instantiated only when the
|
|
arubaWiredConfigurationCopyState for this entry is in the
|
|
'failed' state."
|
|
::= { arubaWiredConfigurationCopyEntry 17 }
|
|
|
|
arubaWiredConfigurationCopyEntryRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry. Once the entry
|
|
status is set to active, the associated entry cannot
|
|
be modified until the request completes
|
|
(arubaWiredConfigurationCopyState transitions to 'successful'
|
|
or 'failed' state)."
|
|
::= { arubaWiredConfigurationCopyEntry 18 }
|
|
|
|
-- ************************************************************
|
|
-- Configuration Scalars
|
|
-- ************************************************************
|
|
arubaWiredConfigurationChange OBJECT IDENTIFIER ::= { arubaWiredConfigurationObjects 1 }
|
|
|
|
arubaWiredConfigurationChangeNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system produces
|
|
the arubaWiredConfigurationChange notification. A false
|
|
value will prevent notifications from being generated
|
|
by this system."
|
|
DEFVAL { false }
|
|
::= { arubaWiredConfigurationChange 1 }
|
|
|
|
arubaWiredConfigurationChangeSource OBJECT-TYPE
|
|
SYNTAX ConfigurationEventMedium
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Configuration change source."
|
|
::= { arubaWiredConfigurationChange 2 }
|
|
|
|
arubaWiredConfigurationChangeTimestamp OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The value of sysUpTime when the running configuration was last changed."
|
|
::= { arubaWiredConfigurationChange 3 }
|
|
|
|
--*************************************************************
|
|
-- Configuration change notifications
|
|
--*************************************************************
|
|
arubaWiredConfigurationChangeNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
arubaWiredConfigurationChangeSource,
|
|
arubaWiredConfigurationChangeTimestamp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the running configuration changes."
|
|
::= { arubaWiredConfigurationNotifications 1 }
|
|
|
|
arubaWiredConfigurationNotificationOnCompletion NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
arubaWiredConfigurationCopyServerAddress,
|
|
arubaWiredConfigurationCopyFileName,
|
|
arubaWiredConfigurationCopyState,
|
|
arubaWiredConfigurationCopyTimeStarted,
|
|
arubaWiredConfigurationCopyTimeCompleted,
|
|
arubaWiredConfigurationCopyFailureCause
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when a copy operation finishes."
|
|
::= { arubaWiredConfigurationNotifications 2 }
|
|
|
|
-- **********************************************************************
|
|
-- Configuration Conformance information
|
|
-- **********************************************************************
|
|
arubaWiredConfigurationCompliances OBJECT IDENTIFIER ::= { arubaWiredConfigurationConformance 1 }
|
|
arubaWiredConfigurationGroups OBJECT IDENTIFIER ::= { arubaWiredConfigurationConformance 2 }
|
|
|
|
arubaWiredConfigurationScalarGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
arubaWiredConfigurationChangeNotificationEnable,
|
|
arubaWiredConfigurationChangeSource,
|
|
arubaWiredConfigurationChangeTimestamp
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of scalar objects."
|
|
::= { arubaWiredConfigurationGroups 1 }
|
|
|
|
arubaWiredConfigurationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
arubaWiredConfigurationCopyProtocol,
|
|
arubaWiredConfigurationCopySourceFileType,
|
|
arubaWiredConfigurationCopyDestFileType,
|
|
arubaWiredConfigurationCheckpointName,
|
|
arubaWiredConfigurationCopyFileFormat,
|
|
arubaWiredConfigurationCopyFileName,
|
|
arubaWiredConfigurationCopyServerAddressType,
|
|
arubaWiredConfigurationCopyServerAddress,
|
|
arubaWiredConfigurationCopyUserName,
|
|
arubaWiredConfigurationCopyUserPassword,
|
|
arubaWiredConfigurationCopyVRFName,
|
|
arubaWiredConfigurationCopyNotificationOnCompletion,
|
|
arubaWiredConfigurationCopyState,
|
|
arubaWiredConfigurationCopyTimeStarted,
|
|
arubaWiredConfigurationCopyTimeCompleted,
|
|
arubaWiredConfigurationCopyFailureCause,
|
|
arubaWiredConfigurationCopyEntryRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "The configuration copy configuration."
|
|
|
|
::= {arubaWiredConfigurationGroups 2 }
|
|
|
|
arubaWiredConfigurationNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
arubaWiredConfigurationChangeNotification,
|
|
arubaWiredConfigurationNotificationOnCompletion
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of configuration copy notifications objects."
|
|
::= { arubaWiredConfigurationGroups 3 }
|
|
|
|
arubaWiredConfigurationCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for devices implementing the
|
|
ARUBA WIRED CONFIG Mib."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
arubaWiredConfigurationScalarGroup,
|
|
arubaWiredConfigurationGroup,
|
|
arubaWiredConfigurationNotificationsGroup
|
|
}
|
|
::= { arubaWiredConfigurationCompliances 1 }
|
|
|
|
END
|