2936 lines
108 KiB
Plaintext
2936 lines
108 KiB
Plaintext
ARRIS-CM-DOC30-DEVICE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32, Counter32,
|
|
IpAddress, TimeTicks, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
InetAddress,
|
|
InetAddressType
|
|
FROM INET-ADDRESS-MIB
|
|
arrisProdIdCM
|
|
FROM ARRIS-MIB
|
|
TruthValue, DisplayString, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
docsDevEvLevel,
|
|
docsDevEvId,
|
|
docsDevEvText
|
|
FROM DOCS-CABLE-DEVICE-MIB
|
|
ifPhysAddress,
|
|
ifIndex
|
|
FROM IF-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
AmplitudeData
|
|
FROM DOCS-IF3-MIB
|
|
TenthdB,
|
|
docsIfCmCmtsAddress,
|
|
docsIfDocsisBaseCapability,
|
|
docsIfCmStatusDocsisOperMode,
|
|
docsIfCmStatusModulationType
|
|
FROM DOCS-IF-MIB; -- draft-ietf-ipcdn-docs-rfmibv2-05
|
|
|
|
arrisCmDoc30Mib MODULE-IDENTITY
|
|
LAST-UPDATED "1507160000Z" -- Jul 16, 2015
|
|
ORGANIZATION "ARRIS Broadband"
|
|
CONTACT-INFO "Chris Hare
|
|
Postal: ARRIS Broadband
|
|
3871 Lakefield Drive
|
|
Suite 300
|
|
Suwanee, GA 30024-1242
|
|
U.S.A.
|
|
Phone: +1 678-473-5165
|
|
E-mail: chris.hare@arrisi.com"
|
|
DESCRIPTION
|
|
"This MIB module supplies the basic proprietary (ARRIS-specific)
|
|
management objects for ARRIS Cable Modem (CM) devices."
|
|
|
|
-- Revision history
|
|
REVISION "1507160000Z" -- Jul 16, 2015
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupDownstreamScanMaskEnable MIB."
|
|
REVISION "1503110000Z" -- Mar 11, 2015
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupIgnoreMtaDnsRDValidation MIB."
|
|
REVISION "1412100000Z" -- Dec 10, 2014
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SessionTime, arrisCmDoc30SessionDataDownloaded, arrisCmDoc30SessionDataUploaded
|
|
and arrisCmDoc30ResetActivitySummary to folder 'arrisCmDoc30Access'."
|
|
REVISION "1410290000Z" -- Oct 29, 2014
|
|
DESCRIPTION
|
|
"Update text for channel bonding MIBs"
|
|
REVISION "1409190000Z" -- Sep 19, 2014
|
|
DESCRIPTION
|
|
"Restore arrisCmDoc30SwTable for the EFL feature"
|
|
REVISION "1409090000Z" -- Sep 9, 2014
|
|
DESCRIPTION
|
|
"Added two new MIB objects to folder 'arrisCmDoc30Setup' for expanded channel bonding."
|
|
REVISION "1408050000Z" -- Aug 05, 2014
|
|
DESCRIPTION
|
|
"Added new MIB 'arrisCmDoc30Setup6rdPPSupport'"
|
|
REVISION "1407290000Z" -- July 29, 2014
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupPowerSaveOption to support Puma5."
|
|
REVISION "1407220000Z" -- July 22, 2014
|
|
DESCRIPTION
|
|
"Added new MIB 'arrisCmDoc30DhcpExtendedSrvDUIDV6' for TR181 DHCPv6 client Profiles.
|
|
Added new MIB 'arrisCmDoc30DhcpExtendedCmDUIDV6' for TR181 DHCPv6 client Profiles."
|
|
REVISION "1407110000Z" -- July 11, 2014
|
|
DESCRIPTION
|
|
"Added new table 'arrisCmDoc30DhcpExtendedDnsSvrTable' for TR181 DHCPv4 client Profiles.
|
|
Added new MIB 'arrisCmDoc30DhcpExtendedRenewLease' for TR181 DHCPv4 client Profiles."
|
|
REVISION "1406180000Z" -- June 18, 2014
|
|
DESCRIPTION
|
|
"Added new MIB objects to folder 'arrisCmDoc30Spectrum' for Spectrum Analyzer."
|
|
REVISION "1404080000Z" -- April 29, 2014
|
|
DESCRIPTION
|
|
"Added new folder 'arrisCmDoc30TraceRtMgmt' for TR143 TraceRoute Profiles."
|
|
REVISION "1404070000Z" -- April 7, 2014
|
|
DESCRIPTION
|
|
"Added new folder 'arrisCmDoc30PingMgmt' for TR143 IPPing Profiles."
|
|
REVISION "1401230000Z" -- Jan 23, 2014
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30BaseTodStatus to reflect the current TOD status."
|
|
REVISION "1307040000Z" -- Jul 04, 2013
|
|
DESCRIPTION
|
|
"Restore the arrisCmDoc30Software MIB group(only include arrisCmDoc30SwRegistrationState)."
|
|
REVISION "1306120000Z" -- May 29, 2013
|
|
DESCRIPTION
|
|
"Changed the minimum value of arrisCmDoc30SetupTftpBlkSize from 64 to 512."
|
|
REVISION "1305290000Z" -- May 29, 2013
|
|
DESCRIPTION
|
|
"Added 0 as a legal value in the description for arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue"
|
|
REVISION "1305160000Z" -- May 16, 2013
|
|
DESCRIPTION
|
|
"Removed DEFVAL for arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue since it is HW specific"
|
|
REVISION "1305080000Z" -- May 8, 2013
|
|
DESCRIPTION
|
|
"Removed the arrisCmDoc30Software MIB group."
|
|
REVISION "1306070000Z" -- May 7, 2013
|
|
DESCRIPTION
|
|
"Removed obsolete arrisCmDoc30SetupMultiColorLedBitmap and arrisCmDoc30SetupInvertMulticolorLEDs"
|
|
REVISION "1304230000Z" -- Apr. 23, 2013
|
|
DESCRIPTION
|
|
"Renamed Arris eSAFE mibs. Added two new mibs to Arris eSAFE mibtree. Other minor mods"
|
|
REVISION "1304110000Z" -- Apr. 11, 2013
|
|
DESCRIPTION
|
|
"Replaced arrisCmDoc30SetupExtendedUpstreamTransmitPowerEnable with arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue"
|
|
REVISION "1304110000Z" -- Apr. 11, 2013
|
|
DESCRIPTION
|
|
"Removed obsolte MIB arrisCmDoc30SetupPowerSaveOption"
|
|
REVISION "1301110000Z" -- Jan. 11, 2013
|
|
DESCRIPTION
|
|
"Added new MIB 'arrisCmDoc30SetupRCPBypass'"
|
|
REVISION "1208150000Z" -- August, 15, 2012
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30AccessTechnicianPassword"
|
|
REVISION "1203210000Z" -- March, 21, 2012
|
|
DESCRIPTION
|
|
"Added new mode keepallusds(2) to arrisCmDoc30SetupPowerSaveMode "
|
|
REVISION "1202090000Z" -- February, 09, 2012
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupT4timeoutRebootEnable"
|
|
REVISION "1202010000Z" -- February, 01, 2012
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupExtendSwCurrentVersEnable"
|
|
REVISION "1201190000Z" -- January, 19, 2012
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupTftpTimeout and arrisCmDoc30SetupTftpBlkSize"
|
|
REVISION "1110200000Z" -- October, 19, 2011
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupL2VPNPromiscuousMode"
|
|
REVISION "1108160000Z" -- August 16, 2011
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupIgnoreMddSymbolClockIndicator"
|
|
REVISION "1107210000Z" -- July 21, 2011
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupEthernetLinkBounce"
|
|
REVISION "1107140000Z" -- July 14, 2011
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30DhcpExtended tree"
|
|
REVISION "1104280000Z" -- April 28, 2011
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupSWDLFilenameCheckOverride and arrisCmDoc30SetupTODSyncTimeout and arrisCmDoc30DhcpMtaOpt60Override"
|
|
REVISION "1104050000Z" -- April 05, 2011
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SwRegistrationState"
|
|
REVISION "1103140000Z" -- March 14,2011
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupPowerSaveWifiShutdownOnly"
|
|
REVISION "1102230000Z" -- February 23,2011
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupKeepCpeOnIfDisconnect"
|
|
REVISION "1012290000Z" -- Dec 29, 2010
|
|
DESCRIPTION
|
|
"Corrected the description for arrisCmDoc30DhcpSecondaryTeleDhcpSvr and arrisCmDoc30DhcpPrimaryTeleDhcpSvr"
|
|
REVISION "1010080000Z" -- October 8, 2010
|
|
DESCRIPTION
|
|
"added arrisCmDoc30SetupPowerSaveOption"
|
|
REVISION "1009010000Z" -- September 1, 2010
|
|
DESCRIPTION
|
|
"Enlarged arrisCmDoc30BaseReportDuplex string to support 852"
|
|
REVISION "1008100000Z" -- August 10, 2010
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupPowerSaveMode"
|
|
REVISION "1007120000Z" -- July 12, 2010
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30SetupReducedOORThreshold"
|
|
REVISION "1007060000Z" -- July 06, 2010
|
|
DESCRIPTION
|
|
"Renamed the arrisCmDoc30EsafeSmartDownload mib to
|
|
arrisCmDoc30EsafeSmartDownloadMode and added
|
|
arrisCmDoc30EsafeSmartDownloadStatus"
|
|
REVISION "1006250000Z" -- June 25, 2010
|
|
DESCRIPTION
|
|
"Added arrisCmDoc30ResetReasonLog"
|
|
REVISION "1002010000Z" -- February 01, 2010
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30Esafe and arrisCmDoc30EsafeFirmware branches"
|
|
REVISION "0911200000Z" -- November 20, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupMdfSupportOverride"
|
|
REVISION "0908210000Z" -- August 20, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupTODTimeOffset"
|
|
REVISION "0908200000Z" -- August 20, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupUdcAllowed"
|
|
REVISION "0907220000Z" -- July 22, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupMddIpModeOverride"
|
|
REVISION "0906250000Z" -- June 25, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupDSTPolicy"
|
|
REVISION "0906020000Z" -- June 2, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30ProvisionedChannelIDs"
|
|
REVISION "0905130000Z" -- May 13, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30ResetAccessTime"
|
|
REVISION "0904170000Z" -- April 17, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupPartServiceFallback20 MIB."
|
|
REVISION "0904090000Z" -- April 9, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30BondingMode MIB."
|
|
REVISION "0904060000Z" -- April 6, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30MfgCertCommunityName MIB."
|
|
REVISION "0903300000Z" -- March 30, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SwCvc MIBs."
|
|
REVISION "0903130000Z" -- March 13, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupSecDsLossReinitEnable MIB."
|
|
REVISION "0903120000Z" -- March 12, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30AccessSSHEnable MIB."
|
|
REVISION "0903100000Z" -- March 10, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30AccessHttpPwCtrl MIB."
|
|
REVISION "0903050000Z" -- March 5, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30Software MIB group."
|
|
REVISION "0903040000Z" -- March 4, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupMultiColorLedBitmap MIB."
|
|
REVISION "0902110000Z" -- Feb 11, 2009
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30SetupPacketProcessorEnable MIB."
|
|
REVISION "0812110000Z" -- Dec 11, 2008
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc20CLITimeout MIB."
|
|
REVISION "0809030000Z" -- Sept 03, 2008
|
|
DESCRIPTION
|
|
"removed the ProvmMethodIndicator MIB. This will be implemented on the MTA side."
|
|
REVISION "0809020000Z" -- Sept 02, 2008
|
|
DESCRIPTION
|
|
"Added new folder 'arrisCmDoc30Setup'. Added the arrisCmDoc30ProvMethodIndicator MIB to it."
|
|
REVISION "0807180000Z" -- July 18, 2008
|
|
DESCRIPTION
|
|
"Added new mibs for WAN/LAN HTTP access"
|
|
REVISION "0806180000Z" -- June. 18, 2008
|
|
DESCRIPTION
|
|
"Added new folder 'arrisCmDoc30Access' to contain all password and telnet access mibs.
|
|
Added new mibs 'arrisCmDoc30AccessClientSeed','arrisCmDoc30AccessSinglePassword'"
|
|
REVISION "1411060000Z" -- Nov 06, 2014
|
|
DESCRIPTION
|
|
"Added the arrisCmDoc30CustomID MIB."
|
|
::= { arrisProdIdCM 4 }
|
|
|
|
CvcString ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "x"
|
|
STATUS current
|
|
DESCRIPTION "This data type defines a string of hex bytes comprising the CVC."
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
|
|
SpectrumAnalysisWindowFunction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the windowing function which will be used
|
|
when performing the discrete fourier transform for the analysis.
|
|
Note that all window functions may not be supported by all
|
|
devices. If an attempt is made to set the object to an
|
|
unsupported window function, an error of inconsistentValue will
|
|
be returned."
|
|
REFERENCE
|
|
"Harris, Fredric J. (Jan 1978). 'On the use of Windows for
|
|
Harmonic Analysis with the Discrete Fourier Transform'.
|
|
Proceedings of the IEEE, Vol 66, Issue 1, Jan 1978
|
|
doi:10.1109/PROC.1978.10837"
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
hann(1),
|
|
blackmanHarris(2),
|
|
rectangular(3),
|
|
hamming(4),
|
|
flatTop(5),
|
|
gaussian(6),
|
|
chebyshev(7)
|
|
}
|
|
|
|
arrisCmDoc30MibObjects OBJECT IDENTIFIER ::= { arrisCmDoc30Mib 1 }
|
|
arrisCmDoc30Base OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 1 }
|
|
arrisCmDoc30Access OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 2 }
|
|
arrisCmDoc30Setup OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 3 }
|
|
--
|
|
-- The following group describes the Dhcp parameters objects
|
|
--
|
|
arrisCmDoc30Dhcp OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 4 }
|
|
arrisCmDoc30DhcpLeaseParameters OBJECT IDENTIFIER ::= { arrisCmDoc30Dhcp 1 }
|
|
arrisCmDoc30DhcpSvrParameters OBJECT IDENTIFIER ::= { arrisCmDoc30Dhcp 2 }
|
|
arrisCmDoc30DhcpCmParameters OBJECT IDENTIFIER ::= { arrisCmDoc30Dhcp 3 }
|
|
arrisCmDoc30DhcpMtaParameters OBJECT IDENTIFIER ::= { arrisCmDoc30Dhcp 4 }
|
|
--
|
|
arrisCmDoc30Software OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 5 }
|
|
|
|
arrisCmDoc30Esafe OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 6 }
|
|
arrisCmDoc30EsafeFirmware OBJECT IDENTIFIER ::= { arrisCmDoc30Esafe 1 }
|
|
|
|
arrisCmDoc30ResetReasonLog OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 7 }
|
|
|
|
--
|
|
-- The following group describes the Dhcp Extended parameters objects
|
|
--
|
|
arrisCmDoc30DhcpExtended OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 8 }
|
|
|
|
--
|
|
-- The following group extends docsIfBaseObjects in rfc4546.mib
|
|
--
|
|
arrisCmDoc30IfBaseObjectsExtended OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 9 }
|
|
|
|
--
|
|
-- The following group describes the TR143 IPPing and TraceRoute Profiles
|
|
--
|
|
arrisCmDoc30PingMgmt OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 10 }
|
|
arrisCmDoc30TraceRtMgmt OBJECT IDENTIFIER ::= { arrisCmDoc30MibObjects 11 }
|
|
|
|
arrisCmDoc30ResetFactoryDefaults OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset a number of settings to their default factory values.
|
|
This includes clearing the modem's frequency cache and
|
|
restoring a number of NVM parameters to their original values."
|
|
::= { arrisCmDoc30Base 6 }
|
|
|
|
arrisCmDoc30FwImageName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the firmware image currently operating on this device."
|
|
::= { arrisCmDoc30Base 7 }
|
|
|
|
arrisCmDoc30FwImageBuildTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The build date and time of the firmware image currently operating on
|
|
this device."
|
|
::= { arrisCmDoc30Base 8 }
|
|
|
|
arrisCmDoc30MfgCertCommunityName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community name of the Manufacturing certificate in use. 'US' for North American Docsis or
|
|
'BE' for European Docsis."
|
|
::= { arrisCmDoc30Base 9 }
|
|
|
|
arrisCmDoc30BondingMode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The registration mode of the modem and how many DS/US it is using."
|
|
::= { arrisCmDoc30Base 10 }
|
|
|
|
arrisCmDoc30ResetAccessTime OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to true(1) resets Access start times in NVRAM.
|
|
Reading this object always returns false(2)."
|
|
::= { arrisCmDoc30Base 11 }
|
|
|
|
arrisCmDoc30ProvisionedChannelIDs OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays channel IDs of all upstreams or downstreams provisioned by the
|
|
CMTS. Downstreams that are not currently locked are enclosed in ()."
|
|
::= { arrisCmDoc30Base 12 }
|
|
|
|
arrisCmDoc30BaseReportDuplex OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reports the current duplex status of the Ethernet Port.
|
|
Reading this object can return the strings 'Full', 'Half', or 'Unavailable'."
|
|
::= { arrisCmDoc30Base 13 }
|
|
|
|
arrisCmDoc30BaseTodStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reflects the current TOD status.
|
|
0 - Not Provisioned,
|
|
1 - Missing Server Address,
|
|
2 - Missing Server Address,
|
|
3 - Missing Server Address,
|
|
4 - Starting Request,
|
|
5 - Request Failed,
|
|
6 - No Response Received,
|
|
7 - Invalid Data Format,
|
|
8 - Retrieved,
|
|
9 - Failed"
|
|
::= { arrisCmDoc30Base 14 }
|
|
|
|
|
|
arrisCmDoc30CustomID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer which represents a customer ID for customization."
|
|
::= { arrisCmDoc30Base 15}
|
|
|
|
|
|
|
|
arrisCmDoc30AccessTelnetPassword OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..11))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password required to enable telnet."
|
|
::= { arrisCmDoc30Access 1 }
|
|
|
|
arrisCmDoc30AccessTelnetEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1),
|
|
enableLanWan(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to turn on/off telnet access. For telnet to be enabled, the
|
|
arrisCmDoc30AccessTelnetPassword MIB must be set."
|
|
::= { arrisCmDoc30Access 2 }
|
|
|
|
arrisCmDoc30AccessClientSeed OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DES encoded seed--provided by the user--that will be used
|
|
to generate the password for access to the CLI.
|
|
When read, this object will return a zero-length string."
|
|
::= { arrisCmDoc30Access 3 }
|
|
|
|
arrisCmDoc30AccessSinglePassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The encoded password--provided by the user--that will be used
|
|
for single password access to the CLI.
|
|
When read, this object will return a zero-length string."
|
|
::= { arrisCmDoc30Access 4 }
|
|
|
|
arrisCmDoc30AccessHttpLan OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to turn on/off LAN HTTP access. For LAN HTTP to be enabled, the
|
|
arrisCmDoc30AccessHttpLan MIB must be set to 1."
|
|
::= { arrisCmDoc30Access 5 }
|
|
|
|
arrisCmDoc30AccessHttpWan OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1),
|
|
cmpage(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to turn on/off WAN HTTP access. For WAN HTTP to be enabled, the
|
|
arrisCmDoc30AccessHttpWan MIB must be set to 1.
|
|
1: disable(0) - Turn off WAN HTTP access.
|
|
2: enable(1) - Turn on WAN HTTP access.
|
|
3: cmpage(3) - Only enables access to the CM Page. No redirect to the Gateway GUI is allowed."
|
|
::= { arrisCmDoc30Access 6 }
|
|
|
|
arrisCmDoc30AccessHttpTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to set how long after login before web gui access times out. In minutes, 0 disables timeout"
|
|
::= { arrisCmDoc30Access 7 }
|
|
|
|
arrisCmDoc30CLITimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max time that a telnet/SSH session can be idle before it is terminated.
|
|
Range is 0-65535 minutes, where 0 disables the timer completely."
|
|
::= { arrisCmDoc30Access 8 }
|
|
|
|
arrisCmDoc30AccessHttpPwCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
advanced(1),
|
|
all(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to control which modem web pages are password protected. A value of 0 means no pages
|
|
are protected, 1 means advanced pages, 2 means all pages."
|
|
::= { arrisCmDoc30Access 9 }
|
|
|
|
arrisCmDoc30AccessSSHEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1),
|
|
enableLanWan(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to turn on/off SSH access. For SSH to be enabled, the
|
|
arrisCmDoc30AccessTelnetPassword MIB must be set.
|
|
For TWC, enable only for wan telnet enable, enableLanWan for wan and lan telnet enable.
|
|
For non-TWC, enable and enableLanWan are have the same behaviour"
|
|
::= { arrisCmDoc30Access 10 }
|
|
|
|
arrisCmDoc30AccessTechnicianPassword OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(12..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password for the technician."
|
|
::= { arrisCmDoc30Access 11 }
|
|
|
|
arrisCmDoc30SessionTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time since the Device was last power cycled, rebooted or since the reset activity
|
|
button was last pressed."
|
|
::= { arrisCmDoc30Access 12 }
|
|
|
|
arrisCmDoc30SessionDataDownloaded OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data download count since the Device was last power cycled, rebooted or since the
|
|
reset activity button was last pressed."
|
|
::= { arrisCmDoc30Access 13 }
|
|
|
|
arrisCmDoc30SessionDataUploaded OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data upload count since the Device was last power cycled, rebooted or since the
|
|
reset activity button was last pressed."
|
|
::= { arrisCmDoc30Access 14 }
|
|
|
|
arrisCmDoc30ResetActivitySummary OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Device clears the arrisCmDoc30SessionTime, arrisCmDoc30SessionDataDownloaded and
|
|
arrisCmDoc30SessionDataUploaded when set to true. Always return false(2)."
|
|
::= { arrisCmDoc30Access 15 }
|
|
|
|
arrisCMDoc30AccessWANACL OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access Control List of IPs that are allowed to originate request to access GUI via CM IP. If empty means no restrict.
|
|
Format: ip[-ip](;ip[-ip])*
|
|
Example: 10.0.0.0-10.255.255.255;172.44.56.0-172.44.56.244"
|
|
::= { arrisCmDoc30Access 16 }
|
|
|
|
arrisCmDoc30SetupDsBonding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is used to enable/disable downstream channel bonding. Changes take effect at the next
|
|
reboot. This MIB should only be set from the CM configuration file. If this MIB value is altered
|
|
in the CM configuration file, the CM will store the new setting and reboot automatically. If the
|
|
value of this MIB in NVM is 'disable' and the CM configuration file does not contain this MIB,
|
|
the CM will reset this MIB value in NVM to 'enable' and reboot.
|
|
The arrisCmDoc30ResetFactoryDefaults MIB will set the stored value back to 'enable'."
|
|
::= {arrisCmDoc30Setup 1}
|
|
|
|
arrisCmDoc30SetupPacketProcessorEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to turn on/off the modem's packet processor."
|
|
::= { arrisCmDoc30Setup 2 }
|
|
|
|
arrisCmDoc30SetupMultiColorLedBitmap OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bitmap used to turn on/off the modem's multi-color LED functionality. A value of 1 enables the
|
|
multi-color functionality and a value of 0 disables it.
|
|
|
|
0x1 Link LED
|
|
0x2 Upstream LED
|
|
0x4 Downstream LED
|
|
|
|
Devices with multiple rear Ethernet ports do not support multiple colors for the front panel Link LED.
|
|
They will ignore the Link LED bit 0x1."
|
|
::= { arrisCmDoc30Setup 3 }
|
|
|
|
arrisCmDoc30SetupSecDsLossReinitEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB when enabled allows an outage of a bonded downstream secondary channel to force
|
|
a reinitialization to occur that makes the DOCSIS modem re-register. This feature may
|
|
provide an improved level of partial services support on some early DOCSIS 3.0 CMTS. This
|
|
MIB should be disabled when used with CMTS that fully support DOCSIS 3.0 CM-STATUS messages."
|
|
::= { arrisCmDoc30Setup 4 }
|
|
|
|
arrisCmDoc30SetupPartServiceFallback20 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB when enabled prevents the REG-ACK message from sending up a partial services
|
|
confirmation code and instead will reinitialize the primary downstream DOCSIS MAC
|
|
and force the CM to fallback to DOCSIS 2.0 mode which limits the CM to 1x1. Periodically
|
|
the CM with then retry to range and register in DOCSIS 3.0 mode. This feature is
|
|
designed specifically to allow interoperability with early DOCSIS 3.0 CMTS releases
|
|
that do not support a REG-ACK message containing a partial services confirmation code.
|
|
This feature may provide an improved level of partial services support on some early DOCSIS 3.0 CMTS.
|
|
This MIB should be disabled when used with any CMTS that fully supports DOCSIS 3.0 CM-STATUS messages."
|
|
::= { arrisCmDoc30Setup 5 }
|
|
|
|
arrisCmDoc30SetupDSTPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..50))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to get and set the daylight saving time policy. This parameter
|
|
is a rule with two fields separated by semicolon (;) as shown below:
|
|
start=<start-time>;end=<end-time>
|
|
<start-time> and <end-time> are of the form: <month>/<day>/<weekday>/<HH>
|
|
<month> = 1,2,12 (for Jan, Feb, Dec)
|
|
<day> = [+|-]1,2,3,...,,31. If <day> is -1, it means the <weekday> on or before the end-of-the-month
|
|
(in other words the last occurrence of <weekday> in that month)
|
|
<weekday> = 1, 2, 3,..., 7 (for Mon, Tue, ..., Sun), or 0. If <weekday> is 0, it means the date to
|
|
start or end daylight saving is at exactly the given date. In that case, the <day> value must not be
|
|
negative. If <weekday> is not zero, then the daylight saving starts or ends on the <weekday> on or
|
|
after the given date if <day> is positive, or on or before the given date if <day> is negative.
|
|
<HH> = hour (0-23).
|
|
The following example reflects the new change starting March 2007 in U.S.A. DST starts on the second Sunday
|
|
in March and ends on the first Sunday in November:
|
|
start=3/8/7/02;end=11/1/7/02"
|
|
::= { arrisCmDoc30Setup 6 }
|
|
|
|
arrisCmDoc30SetupMddIpModeOverride OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
ipv4(1),
|
|
ipv6(2),
|
|
apm(3),
|
|
dpm(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to override the IP Mode TLV in the MDD message.
|
|
0 = use the MDD value
|
|
1 = IPv4 Only
|
|
2 = IPv6 Only
|
|
3 = Alternate (APM)
|
|
4 = Dual-stack (DPM)"
|
|
::= { arrisCmDoc30Setup 7 }
|
|
|
|
arrisCmDoc30SetupPacketCableRegion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
northAmerican(0),
|
|
european(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is used to set the desired region for MTA PacketCable provisioning."
|
|
::= { arrisCmDoc30Setup 8 }
|
|
|
|
arrisCmDoc30SetupTodDelaySecProv OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is used to delay secure provisioning when time-of-day retrieval fails."
|
|
::= { arrisCmDoc30Setup 9 }
|
|
|
|
arrisCmDoc30SetupUdcAllowed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disallowed(0),
|
|
allowed(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to disallow upstream drop classifiers, overriding the REG-RSP value.
|
|
0 = disallow UDC, regardless of what the CMTS sets
|
|
1 = allow UDC"
|
|
::= { arrisCmDoc30Setup 10 }
|
|
|
|
arrisCmDoc30SetupTODTimeOffset OBJECT-TYPE
|
|
SYNTAX Integer32 (-43200..46800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib is used to update CM TOD time offset.
|
|
The range of the offset is -12*60*60(-43200) to 13*60*60(46800) in seconds.
|
|
13 is Daylight Savings Time in the +12 time zone). The CM TOD time offset
|
|
is overwritten when this mib is set or CM dhcp time offset option is received."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 11 }
|
|
|
|
arrisCmDoc30SetupDhcpRetries OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
retry0x(0),
|
|
retry1x(1),
|
|
retry2x(2),
|
|
retry3x(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP Retries during provisioning. This MIB object controls the number of times
|
|
the MTA will ignore the received, non-Secure (Basic or Hybrid) DHCP OFFER while
|
|
waiting for a Secure flow DHCP OFFER. The value of this MIB object controls the
|
|
value of the CLI parameter PACM_CONFIG_PROV_DHCP_RETRIES."
|
|
::= { arrisCmDoc30Setup 12 }
|
|
|
|
arrisCmDoc30SetupInvertMulticolorLEDs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB is used to enable/disable inverted multicolor LED behavior.
|
|
The value will be stored to NonVolatile memory(NVM) and will persist across reboots.
|
|
0 = Original LED color scheme:
|
|
Bonded DS = Green; non-bonded DS = Yellow
|
|
Bonded US = Green; non-bonded US = Yellow
|
|
GigE/USB2.0 = Green; 10/100/USB1.x = Yellow
|
|
1 = Inverted LED color scheme:
|
|
Bonded DS = Yellow; non-bonded DS = Green
|
|
Bonded US = Yellow; non-bonded US = Green
|
|
GigE/USB2.0 = Yellow; 10/100/USB1.x = Green
|
|
|
|
Gateway devices with multiple Ethernet ports do not support Yellow for the front panel
|
|
GigE LED. The Green color indicates one or more connections of any speed. The rear Ethernet
|
|
LEDs adjacent to their respective RJ45 ports properly indicate connection speed with
|
|
different colors."
|
|
::= { arrisCmDoc30Setup 13 }
|
|
|
|
arrisCmDoc30SetupTurboDoxEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable/disable TurboDox operation.
|
|
Set to true(1) to enable TurboDox operation mode.
|
|
Set to false(2) to disable TurboDox operation mode. This
|
|
object can only be changed by the configuration file."
|
|
DEFVAL { true }
|
|
::= { arrisCmDoc30Setup 14 }
|
|
|
|
arrisCmDoc30SetupMdfSupportOverride OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to override MDF Support in CMTS REG-RSP value and disabling MDF Support.
|
|
0 = disable, use value CMTS sets
|
|
1 = enable, force MDF Support to be disabled"
|
|
::= { arrisCmDoc30Setup 15 }
|
|
|
|
arrisCmDoc30SetupAdvancedWebPageAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (0),
|
|
lan-access (1),
|
|
wan-access (2),
|
|
wan-lan-access (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable/disable access to the Advanced web page.
|
|
To disable all access set value to (0)
|
|
To enable LAN access set value to (1)
|
|
To enable WAN access set value to (2)
|
|
To enable both access set value to (3)"
|
|
::= { arrisCmDoc30Setup 16 }
|
|
|
|
arrisCmDoc30SetupReducedOORThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (0),
|
|
enable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib controls the number Out-Of-Range packets the modem wiil discard and the
|
|
minimum time it will wait before it re-syncs the 'Next Expected Packet Sequence
|
|
Number' with the CMTS.
|
|
When enabled, the packet threshold is set to 3 and the timeout to 1 second.
|
|
When disabled, the threshold is set to 1000 packets and the timeout to 2 minutes
|
|
per the Mulpi Specification"
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 17 }
|
|
|
|
arrisCmDoc30SetupPowerSaveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
partialservice (0),
|
|
reinitmac (1),
|
|
keepallusds (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib controls the method used for power save mode.
|
|
When set to reinitmac, PowerSaveMode will trigger a mac reinit to 1x1 unbonded,
|
|
and exit from PowerSaveMode will trigger another mac reinit to MxN bonded mode.
|
|
When set to partialservice, PowerSaveMode will not reinitialize the mac, but
|
|
will issue CM-STATUS messages to the CMTS reporting partial service when powering
|
|
down the secondary channels.
|
|
When set to keepallusds, PowerSaveMode will keep all upstream and downstream
|
|
channels unchanged."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 18 }
|
|
|
|
arrisCmDoc30SetupPowerSaveOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
maxupstream (0),
|
|
maxbattery (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to maxbattery, the modem will be configured to maximize battery hold
|
|
up time during AC power failure. In this mode the modem will not support
|
|
synchronous upstreams, such as SCDMA. When set to maxupstream the modem will
|
|
support all upstream types but the battery hold up time will be reduced, even
|
|
when not registered on a synchronous upstream. If this MIB value is altered
|
|
the modem will reboot automatically after the change is applied."
|
|
::= { arrisCmDoc30Setup 19 }
|
|
|
|
arrisCmDoc30SetupKeepCpeOnIfDisconnect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (0),
|
|
enable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, the CPE mac address will remain in the cpe table when the interface
|
|
is disconnected."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 20 }
|
|
|
|
arrisCmDoc30SetupPowerSaveWifiShutdownOnly OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (0),
|
|
enable (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, Gateway products will not power down the entire gateway, but
|
|
just the WiFi radio. This will allow the wired ethernet to remain active.
|
|
When disabled (default), the entire gateway including wired ethernet will be
|
|
powered down"
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 21 }
|
|
|
|
arrisCmDoc30SetupTODSyncTimeout OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value determines the interval between the TOD sync operations.
|
|
Range is 0-4320 hours, where 0 disables the sync completely.
|
|
This value sets the interval starting from the setting of the new value.
|
|
Hence a setting of 10 causes the TOD server to sync every 10 hours from the time the value was set
|
|
Feature is disable by default"
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 22 }
|
|
|
|
arrisCmDoc30SetupSWDLFilenameCheckOverride OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB when enabled will allow the modem to accept and download a new image that
|
|
has the same filename as the previous download. By default this MIB is disabled
|
|
to prevent an automated provisioning system from downloading an image the modem has already
|
|
received. This override only affects docsDevSwAdminStatus initiated upgrades using
|
|
upgradeFromMgt, using allowProvisioningUpgrade and identical filenames is still blocked."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 23 }
|
|
|
|
arrisCmDoc30SetupEthernetLinkBounce OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB when enabled will add an additional step to the T4 DOCSIS MAC reinitialization sequence.
|
|
In addition to the normal DOCSIS MAC reinitilization, this MIB will force the modem to briefly take
|
|
down the ethernet link between the modem and the CPE, which may be useful to cause the attached
|
|
customer CPE to drop its IP address and restart its DHCP process."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 24 }
|
|
|
|
arrisCmDoc30SetupIgnoreMddSymbolClockIndicator OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, the cable modem will ignore the Symbol Clock Locking Indicator TLV in the MDD message and
|
|
always use asynchronous timing mode. In this mode, the cable modem will not lock to the downstream symbol
|
|
clock on its Primary Downstream Channel. It will acquire the synchronization timebase to be used for the
|
|
upstream burst timing from the SYNC messages.
|
|
When disabled, the cable modem will follow the timing mode specified by the Symbol Clock Indicator TLV in
|
|
the MDD message."
|
|
DEFVAL { 1 }
|
|
::= { arrisCmDoc30Setup 25 }
|
|
|
|
arrisCmDoc30SetupL2VPNPromiscuousMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set to true(1) to enable L2VPN promiscuous mode. When in promiscuous mode all
|
|
upstream and downstream L2VPN traffic will be bridged by the CM regardless of source or
|
|
destination MAC address. Learned MAC addresses from L2VPN traffic will not be added to the
|
|
CPE table. Set to false(2) to disable the feature. When set to false all unknown
|
|
(i.e. previously unlearned) unicast and broadcast L2VPN traffic will be processed in accordance
|
|
with the DOCSIS MULPI specification as required by the BSoD L2VPN specification."
|
|
DEFVAL { false }
|
|
::= { arrisCmDoc30Setup 27 }
|
|
|
|
arrisCmDoc30SetupTftpBlkSize OBJECT-TYPE
|
|
SYNTAX Integer32 (512..65464)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used for the TFTP Blocksize Option (RFC 2348).
|
|
Valid values range between 64 and 65464 octets, inclusive.
|
|
If this object is set to 0,default block size of 1428 for ipv6 connection
|
|
and block size of 1448 for ipv4 connections will be used. This mib is applicable for
|
|
only firmware downloads.
|
|
Note : Changing the value of this mib to too high or too low may affect tftp performance"
|
|
::= { arrisCmDoc30Setup 28 }
|
|
|
|
arrisCmDoc30SetupTftpTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object is used for the TFTP Timeout Option (RFC 2349).
|
|
Valid values range between 1 and 255, inclusive.
|
|
Setting this object to 0(default) disables this option.
|
|
When the smart download(arrisCmDoc30EsafeSmartDownloadMode) is enabled
|
|
then the fixed timeout value will be used by the tftp client.This mib is applicable for
|
|
only firmware downloads "
|
|
::= { arrisCmDoc30Setup 29 }
|
|
|
|
|
|
arrisCmDoc30SetupExtendSwCurrentVersEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, the Firmware version displayed in the MIB docsDevSwCurrentVers will be in the format of '<eMTA Model>-<firmware version>'.
|
|
If disabled, the MIB docsDevSwCurrentVers will be displayed in normal format of '<firmware version>"
|
|
DEFVAL {0}
|
|
::= { arrisCmDoc30Setup 30 }
|
|
|
|
arrisCmDoc30SetupT4timeoutRebootEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable/disable unit reboot upon T4 timeout.
|
|
If it is set true(1), unit will reboot upon receipt of a T4 message.
|
|
If it is set false (2), this feature is disabled."
|
|
DEFVAL { false }
|
|
::= { arrisCmDoc30Setup 31 }
|
|
|
|
arrisCmDoc30SetupExtendedUpstreamTransmitPowerValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 205..244)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, extended upstream transmit power capabilities will be reported in REG-REQ-MP
|
|
message. Setting to 0 disables this functionality. Setting to nonzero controls what Pmax
|
|
the modem advertises in 0.25dB steps. The default value is hardware-specific.
|
|
|
|
It is not recommended to change from default values. Exceeding the capabilities of the upstream
|
|
amplifier may introduce distortions and spurs which may decrease SNR of this upstream channel and
|
|
adjacent upstream channels. Please refer to the Firmware Guide and take care when setting this value."
|
|
::= { arrisCmDoc30Setup 32 }
|
|
|
|
arrisCmDoc30SetupRCPBypass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1),
|
|
default(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable/disable RCP check bypass feature.
|
|
If it is set to disable (0), RCP check bypass feature is disabled.
|
|
If it is set to enable (1), RCP check bypass feature is enabled.
|
|
If it is set to default (2), RCP check bypass feature is disabled and follow
|
|
the setting in cm config file.
|
|
Setting via SNMP is persistent, and will override the setting in cm config file
|
|
if it is set to enable (1) or disable (0), will follow the setting in cm config
|
|
file if it is set to default (2).
|
|
Setting via cm config file is not persistent."
|
|
DEFVAL { 2 }
|
|
::= { arrisCmDoc30Setup 33 }
|
|
|
|
arrisCmDoc30Setup6rdPPSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable/disable 6RD (protocol 41) PP support.
|
|
If it is set true(1), unit will allow 6RD (protocol 41)
|
|
packet passing through the packet processor.
|
|
If it is set false (2), this feature is disabled."
|
|
DEFVAL { false }
|
|
::= { arrisCmDoc30Setup 34 }
|
|
|
|
arrisCmDoc30SetupT4EvCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
every30s(0),
|
|
once(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When an upstream is impaired, no ranging opportunities are provided for that
|
|
upstream channel, modem would send the T4 timeout every 30s. In this situation,
|
|
there will be excessive T4 timeout events sent to the syslog server.
|
|
|
|
This MIB is used to control whether to send T4 timeout event when the modem
|
|
is in upstream partial service mode.
|
|
If the MIB is set to once, T4 timeout event is sent only when the status of one
|
|
upstream is changed from in-service to impaired.
|
|
If the MIB is set to every30s, T4 timeout event is sent every 30s when one upstream
|
|
is impaired."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 35 }
|
|
|
|
arrisCmDoc30SetupExpandedBondingKey OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib is used to set a key that enables bonding additional DS channels for certain modem models.
|
|
When the value in the CM configuration file contains a valid license key, the CM will allow bonding
|
|
additional DS channels beyond its default capability. The arrisCmDoc30BondingModeCapability
|
|
MIB can be used to read the current DS bonding capability.
|
|
When the key does not match or is not present in the CM configuration file, the CM will support its
|
|
default DS channel bonding capability.
|
|
If the value in the CM configuration file represents a change in value from the previous
|
|
registration, the modem will reboot to apply the change."
|
|
::= { arrisCmDoc30Setup 36 }
|
|
|
|
arrisCmDoc30BondingModeCapability OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib shows the number of downstream channels the modem is capable of bonding for certain modem type.
|
|
If arrisCmDoc30SetupExpandedBondingKey is absent or invalid, and modem supports this feature, shipped number of DS is returned.
|
|
If arrisCmDoc30SetupExpandedBondingKey is present and valid, and modem supports this feature, current number of DS is returned.
|
|
If the modem does not support this feature, unknown is returned"
|
|
::= { arrisCmDoc30Setup 37 }
|
|
|
|
arrisCmDoc30SetupIgnoreMtaDnsRDValidation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, the device's MTA provisioning subsystem will ignore the validation of the RD flag in the DNS response.
|
|
Value is not persistent and must be in CM config file."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 38 }
|
|
|
|
arrisCmDoc30SetupTimeoffsetWrapper OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1),
|
|
default(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable/disable Timeoffset Wrapper feature.
|
|
If it is set to disable (0), Timeoffset Wrapper feature is disabled.
|
|
If it is set to enable (1), Timeoffset Wrapper feature is enabled.
|
|
If it is set to default (2), Timeoffset Wrapper feature is disabled and follow
|
|
the setting in cm config file.
|
|
Setting via SNMP is persistent. It will override the setting in cm config file
|
|
if it is set to enable (1) or disable (0). It will follow the setting in cm config
|
|
file if it is set to default (2).
|
|
Setting via cm config file is not persistent."
|
|
DEFVAL { 2 }
|
|
::= { arrisCmDoc30Setup 39 }
|
|
|
|
arrisCmDoc30SetupDownstreamScanMaskEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is just available for CM820B/AU product to enable/disable CM downstream scan mask."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30Setup 40 }
|
|
|
|
-- Group which implements CM spectrum analysis for devices which are capable of
|
|
-- supporting this feature
|
|
|
|
arrisCmDoc30Spectrum OBJECT IDENTIFIER ::= { arrisCmDoc30Setup 209 }
|
|
|
|
arrisCmDoc30SpectrumMeasurementTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30SpectrumMeasurementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides a list of spectral analysis measurements as
|
|
performed across a range of center frequencies. The table is capable
|
|
of representing a full scan of the spectrum."
|
|
::= { arrisCmDoc30Spectrum 1 }
|
|
|
|
arrisCmDoc30SpectrumMeasurementEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30SpectrumMeasurementEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row in the arrisCmDoc30SpectrumMeasurementTable represents the
|
|
spectral analysis around a single center frequency point in the
|
|
spectrum."
|
|
INDEX { arrisCmDoc30SpectrumFrequency }
|
|
::= { arrisCmDoc30SpectrumMeasurementTable 1 }
|
|
|
|
ArrisCmDoc30SpectrumMeasurementEntry ::=
|
|
SEQUENCE {
|
|
arrisCmDoc30SpectrumFrequency Integer32,
|
|
arrisCmDoc30SpectrumAmplitudeData AmplitudeData,
|
|
arrisCmDoc30SpectrumTotalSegmentPower TenthdB
|
|
}
|
|
arrisCmDoc30SpectrumFrequency OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the center frequency of the spectral anaysis
|
|
span which is represented by this entry."
|
|
::= { arrisCmDoc30SpectrumMeasurementEntry 1 }
|
|
|
|
arrisCmDoc30SpectrumAmplitudeData OBJECT-TYPE
|
|
SYNTAX AmplitudeData
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object provides a list of the spectral amplitudes as measured at
|
|
the center frequency specified by arrisCmDoc30SpectrumFrequency.
|
|
|
|
The frequency bins are ordered from lowest to highest frequencies
|
|
covering the frequency span. Information about the center frequency,
|
|
frequency span, number of bins and resolution bandwidth are included
|
|
to provide context to the measurement point.
|
|
|
|
The number of bins will always be an odd number in order to provide a
|
|
spectrum representation that is symmetric about the middle data point
|
|
or bin."
|
|
::= { arrisCmDoc30SpectrumMeasurementEntry 2 }
|
|
|
|
arrisCmDoc30SpectrumTotalSegmentPower OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute provides the total RF power present in the
|
|
segment with the center frequency equal to the Frequency index
|
|
and the span equal to the SegmentFrequencySpan. The value
|
|
represents the sum of the spectrum power in all of the
|
|
associated bins. The value is computed by summing power (not
|
|
dB) values and converting the final sum to TenthdB."
|
|
::= { arrisCmDoc30SpectrumMeasurementEntry 3 }
|
|
|
|
arrisCmDoc30SpectrumEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable or disable the spectrum analyzer feature.
|
|
By default, the feature is disabled unless explicitly enabled.
|
|
|
|
Note that the feature may be disabled by the system under certain
|
|
circumstances if the spectrum analyzer would affect critical services.
|
|
In such a case, the object will return 'false' when read, and will
|
|
reject sets to 'true' with an 'inconsistenValue' error."
|
|
DEFVAL { false }
|
|
::= { arrisCmDoc30Spectrum 2 }
|
|
|
|
arrisCmDoc30SpectrumInactivityTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (0..86400)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the length of time after the last spectrum
|
|
analysis measurement before the feature is automatically disabled.
|
|
If set to a value of 0, the feature will remain enabled until it is
|
|
explicitly disabled."
|
|
DEFVAL { 300 }
|
|
::= { arrisCmDoc30Spectrum 3 }
|
|
|
|
arrisCmDoc30SpectrumFirstSegmentCenterFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Hz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute controls the center frequency of the
|
|
first segment for the spectrum analysis measurement.
|
|
The frequency bins for this segment lie symmetrically
|
|
to the left and right of this center frequency.
|
|
|
|
If the number of bins in a segment is odd, the segment
|
|
center frequency lies directly on the center bin.
|
|
|
|
If the number of bins in a segment is even, the segment
|
|
center frequency lies halfway between two bins.
|
|
|
|
Changing the value of this attribute may result in
|
|
changes to the docsIf3CmSpectrumAnalysisMeasTable.
|
|
Note that if this attribute is set to an invalid value,
|
|
the device may return an error, or may adjust the
|
|
value of the attribute to the closest valid value.
|
|
Setting this mib should be prior to arrisCmDoc30SpectrumEnable
|
|
to make it take effect"
|
|
DEFVAL { 93000000 }
|
|
::= { arrisCmDoc30Spectrum 4 }
|
|
|
|
arrisCmDoc30SpectrumLastSegmentCenterFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Hz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute controls the center frequency of
|
|
the last segment of the spectrum analysis measurement.
|
|
|
|
The frequency bins for this segment lie symmetrically
|
|
to the left and right of this center frequency.
|
|
If the number of bins in a segment is odd, the segment
|
|
center frequency lies directly on the center bin.
|
|
If the number of bins in a segment is even, the segment
|
|
center frequency lies halfway between two bins.
|
|
|
|
The value of the LastSegmentCenterFrequency attribute
|
|
should be equal to the FirstSegmentCenterFrequency
|
|
plus and integer number of segment spans as determined
|
|
by the SegmentFrequencySpan.
|
|
|
|
Changing the value of this attribute may result in changes
|
|
to the docsIf3CmSpectrumAnalysisMeasTable.
|
|
|
|
Note that if this attribute is set to an invalid value,
|
|
the device may return an error, or may adjust the
|
|
value of the attribute to the closest valid value.
|
|
Setting this mib should be prior to arrisCmDoc30SpectrumEnable
|
|
to make it take effect"
|
|
DEFVAL { 993000000 }
|
|
::= { arrisCmDoc30Spectrum 5 }
|
|
|
|
arrisCmDoc30SpectrumSegmentFrequencySpan OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1000000..900000000)
|
|
UNITS "Hz"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute controls the frequency span of each
|
|
segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable.
|
|
|
|
If set to a value of 0, then a default span will be
|
|
chosen based on the hardware capabilities of the
|
|
device. Segments are contiguous from the
|
|
FirstSegementCenterFrequency to the
|
|
LastSegmentCenterFrequency and the center frequency
|
|
for each successive segment is incremented by the
|
|
SegmentFequencySpan.
|
|
The number of segments is (LastSegmentCenterFrequency -
|
|
FirstSegmentCenterFrequency)/SegmentFrequencySpan + 1.
|
|
A segment is equivalent to an instance in the
|
|
docsIf3CmSpectrumAnalysisMeasTable. The chosen
|
|
SegmentFrequencySpan affects the number of entries in
|
|
the docsIf3CmSpectrumAnalysisMeasTable. A more granular
|
|
SegmentFrequencySpan may adversely affect the amount of
|
|
time needed to query the table entries in addition to
|
|
possibly increasing the acquisition time.
|
|
|
|
Changing the value of this attribute may result in
|
|
changes to the docsIf3CmSpectrumAnalysisMeasTable.
|
|
|
|
Note that if this attribute is set to an invalid value,
|
|
the device may return an error, or may adjust the value
|
|
of the object to the closest valid value.
|
|
Setting this mib should be prior to arrisCmDoc30SpectrumEnable
|
|
to make it take effect"
|
|
DEFVAL { 7500000 }
|
|
::= { arrisCmDoc30Spectrum 6 }
|
|
|
|
arrisCmDoc30SpectrumNumBinsPerSegment OBJECT-TYPE
|
|
SYNTAX Unsigned32 (2..2048)
|
|
UNITS "bins-per-segment"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute controls the number of bins collected
|
|
by the measurement performed for each segment (instance)
|
|
in the docsIf3CmSpectrumAnalysisMeasTable.
|
|
|
|
Note that if this attribute is set to an invalid value,
|
|
the device may return an error, or may adjust the value
|
|
of the attribute to the closest valid value.
|
|
Setting this mib should be prior to arrisCmDoc30SpectrumEnable
|
|
to make it take effect"
|
|
DEFVAL { 64 }
|
|
::= { arrisCmDoc30Spectrum 7 }
|
|
|
|
arrisCmDoc30SpectrumEquivalentNoiseBandwidth OBJECT-TYPE
|
|
|
|
SYNTAX Unsigned32 (50..500)
|
|
UNITS "hundredthsbin"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute allows the user to request an equivalent
|
|
noise bandwidth for the resolution bandwidth filter used
|
|
in the spectrum analysis. This corresponds to the
|
|
spectral width of the window function used when performing
|
|
a discrete Fourier transform for the analysis.
|
|
|
|
The window function which corresponds to a value written
|
|
to this object may be obtained by reading the value of the
|
|
WindowFunction attribute.
|
|
|
|
If an unsupported value is requested, the device may
|
|
return an error, or choose the closest valid value to the
|
|
one which is requested.
|
|
If the closest value is chosen, then a subsequent read of
|
|
this attribute will return the actual value which is in use."
|
|
DEFVAL { 150 }
|
|
::= { arrisCmDoc30Spectrum 8 }
|
|
|
|
arrisCmDoc30SpectrumWindowFunction OBJECT-TYPE
|
|
SYNTAX SpectrumAnalysisWindowFunction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute controls or indicates the windowing function
|
|
which will be used when performing the discrete Fourier
|
|
transform for the analysis. The WindowFunction and the
|
|
Equivalent Noise Bandwidth are related. If a particular
|
|
WindowFunction is selected, then the EquivalentNoiseBandwidth
|
|
for the function which is in use, will be reported by the
|
|
EquivalentNoiseBandwidth attribute. Alternatively if
|
|
an EquivalentNoiseBandwidth value is chosen then if a
|
|
WindowFunction function representing that
|
|
EquivalentNoiseBandwidth is defined in the CM, that value will
|
|
be reported in the WindowFunction MIB object, or a value of
|
|
'other' will be reported. Use of 'modern ' windowing
|
|
functions not yet defined will likely be reported as 'other'.
|
|
|
|
Note that all window functions may not be supported by all
|
|
devices. If an attempt is made to set the object to an
|
|
unsupported window function, or if writing of the
|
|
WindowFunction is not supported, an error will be returned."
|
|
::= { arrisCmDoc30Spectrum 9 }
|
|
|
|
arrisCmDoc30SpectrumNumberOfAverages OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute controls the number of averages
|
|
that will be performed on spectral bins.
|
|
The average will be computed using the 'leaky integrator'
|
|
method, where:
|
|
reported bin value = alpha*accumulated bin values +
|
|
(1-alpha)*current bin value.
|
|
|
|
Alpha is one minus the reciprocal of the number of averages.
|
|
For example, if N=25, then alpha = 0.96.
|
|
A value of 1 indicates no averaging.
|
|
Re-writing the number of averages will restart the averaging
|
|
process. If there are no accumulated values, the
|
|
accumulators are made equal to the first measured bin
|
|
amplitudes.
|
|
|
|
If an attempt is made to set the attribute to an unsupported
|
|
number of averages, an error will be returned."
|
|
DEFVAL { 8 }
|
|
::= { arrisCmDoc30Spectrum 10 }
|
|
--
|
|
|
|
|
|
-- arrisCmDoc30DhcpLeaseParameters MIB objects --
|
|
|
|
arrisCmDoc30DhcpOfferedLeaseTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the Offered IP Lease time expressed in seconds."
|
|
::= { arrisCmDoc30DhcpLeaseParameters 1 }
|
|
|
|
arrisCmDoc30DhcpTimeUntilRenew OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current time remaining before the MTA starts the lease renewal
|
|
process. This time is expressed in seconds."
|
|
::= { arrisCmDoc30DhcpLeaseParameters 2 }
|
|
|
|
arrisCmDoc30DhcpTimeUntilRebind OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current time remaining before the CM starts the lease rebinding
|
|
process. This time is expressed in seconds."
|
|
::= { arrisCmDoc30DhcpLeaseParameters 3 }
|
|
|
|
arrisCmDoc30DhcpLeaseTimeRemaining OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the Remaining IP Lease time expressed in seconds."
|
|
::= { arrisCmDoc30DhcpLeaseParameters 4 }
|
|
|
|
-- arrisCmDoc30DhcpSvrParameters MIB objects --
|
|
|
|
arrisCmDoc30DhcpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
init-selecting (0),
|
|
requesting (1),
|
|
bound (2),
|
|
renewing (3),
|
|
rebinding (4),
|
|
init-reboot (5),
|
|
renew-requested (6),
|
|
released (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current Dhcp state of the CM."
|
|
::= { arrisCmDoc30DhcpSvrParameters 1 }
|
|
|
|
arrisCmDoc30DhcpPrimaryDhcpServerIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the primary Dhcp server address."
|
|
::= { arrisCmDoc30DhcpSvrParameters 2 }
|
|
|
|
arrisCmDoc30DhcpTftpSvrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current Tftp Server IP address in use."
|
|
::= { arrisCmDoc30DhcpSvrParameters 3 }
|
|
|
|
arrisCmDoc30DhcpTimeSvrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current Time server IP address in use."
|
|
::= { arrisCmDoc30DhcpSvrParameters 4 }
|
|
|
|
arrisCmDoc30DhcpCmTimeOffset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current Time offset being used by the CM."
|
|
::= { arrisCmDoc30DhcpSvrParameters 5 }
|
|
|
|
arrisCmDoc30DhcpPrimaryTeleDhcpSvr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the primary MTA Dhcp server address."
|
|
::= { arrisCmDoc30DhcpSvrParameters 6 }
|
|
|
|
arrisCmDoc30DhcpSecondaryTeleDhcpSvr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the secondary MTA Dhcp server address."
|
|
::= { arrisCmDoc30DhcpSvrParameters 7 }
|
|
|
|
-- arrisCmDoc30DhcpCmParameters MIB objects --
|
|
|
|
arrisCmDoc30DhcpCmIpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the type of the currently leased IP address ."
|
|
::= { arrisCmDoc30DhcpCmParameters 1 }
|
|
|
|
arrisCmDoc30DhcpCmIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the currently leased IP address ."
|
|
::= { arrisCmDoc30DhcpCmParameters 2 }
|
|
|
|
arrisCmDoc30DhcpCmSubNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current IP subnet mask in use."
|
|
::= { arrisCmDoc30DhcpCmParameters 3 }
|
|
|
|
arrisCmDoc30DhcpCmGatewayIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current IP gateway address in use."
|
|
::= { arrisCmDoc30DhcpCmParameters 4 }
|
|
|
|
arrisCmDoc30DhcpCmConfigFile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the CM configuration file to be retrived."
|
|
::= { arrisCmDoc30DhcpCmParameters 5 }
|
|
|
|
-- arrisCmDoc30DhcpMtaParameters MIB objects --
|
|
|
|
arrisCmDoc30DhcpMtaOpt60Override OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to enable/disable SIP advertisement in MTA DHCP Option60.
|
|
This MIB can only be set via the CM configuration file."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30DhcpMtaParameters 1 }
|
|
|
|
-- arrisCmDoc30Software MIB objects --
|
|
arrisCmDoc30SwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30SwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required for the
|
|
Touchstone Software Upgrade System."
|
|
::= { arrisCmDoc30Software 1 }
|
|
|
|
arrisCmDoc30SwEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30SwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required for the
|
|
Touchstone Software Upgrade System."
|
|
INDEX { arrisCmDoc30SwIndex }
|
|
::= { arrisCmDoc30SwTable 1 }
|
|
|
|
ArrisCmDoc30SwEntry ::= SEQUENCE {
|
|
arrisCmDoc30SwIndex INTEGER,
|
|
arrisCmDoc30SwCustomerLoadId DisplayString,
|
|
arrisCmDoc30SwHwModel DisplayString,
|
|
arrisCmDoc30SwHwRev INTEGER,
|
|
arrisCmDoc30SwFilename DisplayString,
|
|
arrisCmDoc30SwServerAddressType InetAddressType,
|
|
arrisCmDoc30SwServerAddress InetAddress
|
|
}
|
|
|
|
arrisCmDoc30SwIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index used to order the arrisCmDoc30SwTable entries."
|
|
::= { arrisCmDoc30SwEntry 1 }
|
|
|
|
arrisCmDoc30SwCustomerLoadId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Custom string to identify Touchstone Software Upgrade
|
|
load lineups.
|
|
(OPTIONAL)"
|
|
::= { arrisCmDoc30SwEntry 2 }
|
|
|
|
arrisCmDoc30SwHwModel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"HW Model of Touchstone product to be downloaded.
|
|
(REQUIRED)"
|
|
::= { arrisCmDoc30SwEntry 3 }
|
|
|
|
arrisCmDoc30SwHwRev OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"HW Revision of Touchstone product to be downloaded.
|
|
(OPTIONAL)"
|
|
::= { arrisCmDoc30SwEntry 4 }
|
|
|
|
arrisCmDoc30SwFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The file name of the Touchstone software image to be loaded
|
|
on to this device.
|
|
(REQUIRED)"
|
|
::= { arrisCmDoc30SwEntry 5 }
|
|
|
|
arrisCmDoc30SwServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP type (IPv4 or IPv6) of the TFTP server specified in
|
|
arrisCmDoc30SwServerAddress.
|
|
(REQUIRED)"
|
|
::= { arrisCmDoc30SwEntry 6 }
|
|
|
|
arrisCmDoc30SwServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv4 or IPv6 address of the TFTP server that will be used to
|
|
download the Touchstone software image. Note that before setting
|
|
this object, setting arrisCmDoc30SwServerAddressType to the
|
|
appropriate value is required.
|
|
(REQUIRED)"
|
|
::= { arrisCmDoc30SwEntry 7 }
|
|
|
|
arrisCmDoc30SwAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
upgradeFromArrisMgt(1),
|
|
allowArrisProvisioningUpgrade(2),
|
|
ignoreArrisProvisioningUpgrade(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to upgradeFromArrisMgt(1), the device will initiate a
|
|
TFTP software image download using arrisCmDoc30SwFilename for
|
|
the matching HW model type and revision in the
|
|
arrisCmDoc30SwTable.
|
|
|
|
If set to allowArrisProvisioningUpgrade(2), the device will
|
|
use the Touchstone Software Upgrade information supplied by
|
|
the provisioning server when next rebooting (this does not
|
|
cause a reboot).
|
|
|
|
When set to ignoreArrisProvisioningUpgrade(3), the device
|
|
will disregard Touchstone Software Upgrade information from
|
|
the provisioning server.
|
|
|
|
At initial startup, this object has the default value of
|
|
ignoreArrisProvisioningUpgrade(3)."
|
|
::= { arrisCmDoc30Software 2 }
|
|
|
|
arrisCmDoc30SwOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inProgress(1),
|
|
completeFromArrisProvisioning(2),
|
|
completeFromArrisMgt(3),
|
|
failed(4),
|
|
other(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"InProgress(1) indicates that a TFTP download is
|
|
currently underway.
|
|
|
|
CompleteFromProvisioning(2) indicates that the last
|
|
software upgrade was a result of version mismatch at
|
|
provisioning.
|
|
|
|
CompleteFromArrisMgt(3) indicates that the last software
|
|
upgrade was a result of setting arrisCmDoc30SwAdminStatus to
|
|
upgradeFromMgt.
|
|
|
|
Failed(4) indicates that the last attempted download
|
|
failed."
|
|
::= { arrisCmDoc30Software 3 }
|
|
|
|
arrisCmDoc30SwCvcStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cvcNotIncluded(1),
|
|
cvcNotValidated(2),
|
|
cvcValidated(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"cvcNotIncluded indicates the modem did not receive a CVC
|
|
via EFL, and will use the standard manufacturing CVC TLV.
|
|
|
|
cvcNotValidated indicates the modem received a CVC via
|
|
EFL, but the CVC is invalid.
|
|
|
|
cvcValidated indicates the modem received a CVC via EFL,
|
|
and it was able to validate the CVC."
|
|
::= { arrisCmDoc30Software 4 }
|
|
|
|
arrisCmDoc30SwCvc1 OBJECT-TYPE
|
|
SYNTAX CvcString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first string of hex bytes forming the CVC. Reading
|
|
from this MIB returns the entire CVC."
|
|
::= { arrisCmDoc30Software 5 }
|
|
|
|
arrisCmDoc30SwCvc2 OBJECT-TYPE
|
|
SYNTAX CvcString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second string of hex bytes forming the CVC. Reading
|
|
from this MIB returns the entire CVC."
|
|
::= { arrisCmDoc30Software 6 }
|
|
|
|
arrisCmDoc30SwCvc3 OBJECT-TYPE
|
|
SYNTAX CvcString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The third string of hex bytes forming the CVC. Reading
|
|
from this MIB returns the entire CVC."
|
|
::= { arrisCmDoc30Software 7 }
|
|
|
|
arrisCmDoc30SwCvc4 OBJECT-TYPE
|
|
SYNTAX CvcString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fourth (and final) string of hex bytes forming the CVC.
|
|
Reading from this MIB returns the entire CVC."
|
|
::= { arrisCmDoc30Software 8 }
|
|
|
|
arrisCmDoc30SwRegistrationState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
docsis-DownstreamScanning (1),
|
|
docsis-DownstreamRanging (2),
|
|
docsis-UpstreamRanging (3),
|
|
docsis-DHCP (4),
|
|
docsis-TFTP (5),
|
|
docsis-DataRegComplete (6),
|
|
telephony-DHCP (7),
|
|
telephony-TFTP (8),
|
|
telephony-RegWithCallServer (9),
|
|
telephony-RegComplete (10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last registration step completed as the E-MTA provisioning
|
|
progresses through the DOCSIS/PacketCable registration and
|
|
provisioning steps."
|
|
::= { arrisCmDoc30Software 9 }
|
|
|
|
-- arrisCmDoc30EsafeFirmware MIB objects --
|
|
|
|
arrisCmDoc30EsafeFwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30EsafeFwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required to upgrade
|
|
Touchstone ESAFE devices."
|
|
::= { arrisCmDoc30EsafeFirmware 1 }
|
|
|
|
arrisCmDoc30EsafeFwEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30EsafeFwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required to upgrade
|
|
Touchstone ESAFE devices."
|
|
INDEX { arrisCmDoc30EsafeFwDeviceIndex }
|
|
::= { arrisCmDoc30EsafeFwTable 1 }
|
|
|
|
ArrisCmDoc30EsafeFwEntry ::= SEQUENCE {
|
|
arrisCmDoc30EsafeFwDeviceIndex INTEGER,
|
|
arrisCmDoc30EsafeFwServerAddressType InetAddressType,
|
|
arrisCmDoc30EsafeFwServerAddress InetAddress,
|
|
arrisCmDoc30EsafeFwFilename DisplayString,
|
|
arrisCmDoc30EsafeFwAdminStatus INTEGER,
|
|
arrisCmDoc30EsafeFwOperStatus INTEGER,
|
|
arrisCmDoc30EsafeFwCurrentVers DisplayString,
|
|
arrisCmDoc30EsafeFwCurrentFilename DisplayString,
|
|
arrisCmDoc30EsafeFwName DisplayString
|
|
}
|
|
|
|
arrisCmDoc30EsafeFwDeviceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index used to order the arrisCmDoc30SwTable entries. Limited to 2 entries currently.
|
|
Expandable to 5 entries.
|
|
ESAFE Index:
|
|
1 - GW Firmware
|
|
2 - Application Processor Firmware
|
|
3 - Unused (inaccessible for now)
|
|
4 - Unused (inaccessible for now)
|
|
5 - Unused (inaccessible for now)"
|
|
::= { arrisCmDoc30EsafeFwEntry 1 }
|
|
|
|
arrisCmDoc30EsafeFwServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP type (IPv4 or IPv6) of the TFTP server specified in
|
|
arrisCmDoc30EsafeFwServerAddress
|
|
(REQUIRED)"
|
|
::= { arrisCmDoc30EsafeFwEntry 2 }
|
|
|
|
arrisCmDoc30EsafeFwServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv4 or IPv6 address of the TFTP server that will be used to
|
|
download the Touchstone firmware image. Note that before setting
|
|
this object, setting arrisCmDoc30EsafeFwServerAddressType to the
|
|
appropriate value is required.
|
|
(REQUIRED)"
|
|
::= { arrisCmDoc30EsafeFwEntry 3 }
|
|
|
|
arrisCmDoc30EsafeFwFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The file name of the Touchstone ESAFE firmware image to be loaded
|
|
on to this device.
|
|
(REQUIRED)"
|
|
::= { arrisCmDoc30EsafeFwEntry 4 }
|
|
|
|
arrisCmDoc30EsafeFwAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
upgradeFromMgt(1),
|
|
allowProvisioningUpgrade(2),
|
|
ignoreProvisioningUpgrade(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to upgradeFromMgt(1), the device will initiate a
|
|
TFTP firmware image download using arrisCmDoc30EsafeFwFilename
|
|
for the currently indexed esafe device in
|
|
arrisCmDoc30EsafeFwDeviceIndex.
|
|
|
|
If set to allowProvisioningUpgrade(2), the device will
|
|
use the firmware version information supplied by the
|
|
provisioning server when next rebooting (this does not
|
|
cause a reboot).
|
|
|
|
When set to ignoreProvisioningUpgrade(3), the device
|
|
will disregard firmware image upgrade information
|
|
from the provisioning server."
|
|
::= { arrisCmDoc30EsafeFwEntry 5 }
|
|
|
|
arrisCmDoc30EsafeFwOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inProgress(1),
|
|
completeFromProvisioning(2),
|
|
completeFromMgt(3),
|
|
failed(4),
|
|
other(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"InProgress(1) indicates that a TFTP download is
|
|
currently underway.
|
|
|
|
CompleteFromProvisioning(2) indicates that the last
|
|
firmware upgrade was a result of version mismatch at
|
|
provisioning.
|
|
|
|
CompleteFromMgt(3) indicates that the last firmware
|
|
upgrade was a result of setting arrisCmDoc30EsafeFwAdminStatus to
|
|
upgradeFromMgt.
|
|
|
|
Failed(4) indicates that the last attempted download
|
|
failed."
|
|
::= { arrisCmDoc30EsafeFwEntry 6 }
|
|
|
|
arrisCmDoc30EsafeFwCurrentVers OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The firmware version currently operating on this device.
|
|
This string's syntax is that used by the
|
|
individual vendor to identify firmware versions."
|
|
::= { arrisCmDoc30EsafeFwEntry 7 }
|
|
|
|
arrisCmDoc30EsafeFwCurrentFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The filename of the eSAFE firmware currently operating on this device."
|
|
::= { arrisCmDoc30EsafeFwEntry 8 }
|
|
|
|
arrisCmDoc30EsafeFwName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of this eSAFE device"
|
|
::= { arrisCmDoc30EsafeFwEntry 9 }
|
|
|
|
arrisCmDoc30EsafeSmartDownloadMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1),
|
|
autonegotiate(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to turn ARRIS Smart Downloads on/off/auto for esafe-enabled
|
|
products. The smart download feature allows the modem to
|
|
pause and resume the TFTP of its firmware file in order
|
|
to intelligently decide what needs to be done during the
|
|
download. The upside of this feature is downloads are shorter
|
|
because only the exact amount of flash that is needed by the
|
|
file is erased. It also does not need to erase backup flash
|
|
banks for esafe images it is not downloading. It also will
|
|
enable more advanced download features in the future. If this
|
|
feature is disabled then the backup images for all esafes as
|
|
well as the main image will need to be erased before the download
|
|
begins. There is also an autonegotiate mode that can be enabled by
|
|
the flag. This will allow the modem to use the RFC2349 timeout
|
|
option negotiation with the TFTP server to decide if smart
|
|
downloads will be enabled or disabled for subsequent downloads.
|
|
This mode will allow the modem to adapt its behavior to the server.
|
|
This mib is DEPRECATED for all Puma6 and later processors
|
|
(16xx, 24xx, etc).
|
|
Supported Value:
|
|
0 - Smart Downloads DISABLE
|
|
1 - Smart Downloads ENABLE
|
|
2 - Smart Downloads AUTONEGOTIATE"
|
|
::= { arrisCmDoc30EsafeFirmware 2 }
|
|
|
|
arrisCmDoc30EsafeSmartDownloadStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the current status of the smart download feature. This result may
|
|
be either statically provisioned or autonegotiated depending on the smart
|
|
download mode.
|
|
This mib is DEPRECATED for all Puma6 and later processors
|
|
(16xx, 24xx, etc).
|
|
Expected Values:
|
|
0 - Smart Downloads DISABLED
|
|
1 - Smart Downloads ENABLED"
|
|
::= { arrisCmDoc30EsafeFirmware 3 }
|
|
|
|
-- arrisCmDoc30ResetReasonLog MIB objects --
|
|
|
|
arrisCmDoc30LastHwResetReason OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last reset reason retrieved from the actual processor HW. This reason
|
|
is used to determine if the HW or FW caused the reset. The majority of the time
|
|
this reset will indicate that the FW reset the device. It should
|
|
be noted that this reason is not stored off and will show only the last reason
|
|
for the HW to reset."
|
|
::= { arrisCmDoc30ResetReasonLog 1 }
|
|
|
|
arrisCmDoc30ResetReasonLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30ResetReasonLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the last 10 reset reasons."
|
|
::= { arrisCmDoc30ResetReasonLog 2 }
|
|
|
|
arrisCmDoc30ResetReasonLogEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30ResetReasonLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the last 10 reset reasons."
|
|
INDEX { arrisCmDoc30ResetReasonLogIndex }
|
|
::= { arrisCmDoc30ResetReasonLogTable 1 }
|
|
|
|
ArrisCmDoc30ResetReasonLogEntry ::= SEQUENCE {
|
|
arrisCmDoc30ResetReasonLogIndex INTEGER,
|
|
arrisCmDoc30ResetReasonLogText DisplayString
|
|
}
|
|
|
|
arrisCmDoc30ResetReasonLogIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index used to report log reasons."
|
|
::= { arrisCmDoc30ResetReasonLogEntry 1 }
|
|
|
|
arrisCmDoc30ResetReasonLogText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reported reset reason log text."
|
|
::= { arrisCmDoc30ResetReasonLogEntry 2 }
|
|
|
|
-- arrisCmDoc30DhcpExtended MIB objects --
|
|
|
|
arrisCmDoc30DhcpExtendedProvisionedMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4-only (0),
|
|
ipv6-only (1),
|
|
alternate-prov-mode (2),
|
|
dual-prov-mode (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Cm Provisioned Mode"
|
|
::= { arrisCmDoc30DhcpExtended 1 }
|
|
|
|
|
|
arrisCmDoc30DhcpExtendedPreferredMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4 (0),
|
|
ipv6 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Cm preffered IP Mode"
|
|
::= { arrisCmDoc30DhcpExtended 2 }
|
|
|
|
arrisCmDoc30DhcpExtendedActiveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4 (0),
|
|
ipv6 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the Cm active IP Mode"
|
|
::= { arrisCmDoc30DhcpExtended 3 }
|
|
|
|
arrisCmDoc30DhcpExtendedLeaseParametersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30DhcpExtendedLeaseParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required for
|
|
showing the dhcp lease parameters."
|
|
::= { arrisCmDoc30DhcpExtended 5}
|
|
|
|
arrisCmDoc30DhcpExtendedLeaseParametersEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30DhcpExtendedLeaseParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required for
|
|
showing the dhcp lease parameters."
|
|
INDEX { arrisCmDoc30DhcpExtendedLeaseParametersIndex }
|
|
::= { arrisCmDoc30DhcpExtendedLeaseParametersTable 1 }
|
|
|
|
ArrisCmDoc30DhcpExtendedLeaseParametersEntry ::= SEQUENCE {
|
|
arrisCmDoc30DhcpExtendedLeaseParametersIndex INTEGER,
|
|
arrisCmDoc30DhcpExtendedLeaseParametersType INTEGER,
|
|
arrisCmDoc30DhcpExtendedOfferedLeaseTime INTEGER,
|
|
arrisCmDoc30DhcpExtendedTimeUntilRenew INTEGER,
|
|
arrisCmDoc30DhcpExtendedTimeUntilRebind INTEGER,
|
|
arrisCmDoc30DhcpExtendedLeaseTimeRemaining INTEGER,
|
|
arrisCmDoc30DhcpExtendedRenewLease INTEGER
|
|
}
|
|
|
|
arrisCmDoc30DhcpExtendedLeaseParametersIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index used to order the arrisCmDoc30DhcpExtendedLeaseParametersTable entries."
|
|
::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 1 }
|
|
|
|
arrisCmDoc30DhcpExtendedLeaseParametersType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dhcpv4 (0),
|
|
dhcpv6 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib displays the Dhcp Type(dhcpv4,dhcpv6)"
|
|
::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 2}
|
|
|
|
arrisCmDoc30DhcpExtendedOfferedLeaseTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the Offered IP Lease time expressed in seconds."
|
|
::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 3}
|
|
|
|
arrisCmDoc30DhcpExtendedTimeUntilRenew OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current time remaining before the MTA starts the lease renewal
|
|
process. This time is expressed in seconds."
|
|
::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 4 }
|
|
|
|
arrisCmDoc30DhcpExtendedTimeUntilRebind OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current time remaining before the CM starts the lease rebinding
|
|
process. This time is expressed in seconds."
|
|
::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 5 }
|
|
|
|
arrisCmDoc30DhcpExtendedLeaseTimeRemaining OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the Remaining IP Lease time expressed in seconds."
|
|
::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 6 }
|
|
|
|
arrisCmDoc30DhcpExtendedRenewLease OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noApply(0),
|
|
apply(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set to apply(1) to renew the WAN(0) DHCP lease"
|
|
::= { arrisCmDoc30DhcpExtendedLeaseParametersEntry 7 }
|
|
|
|
arrisCmDoc30DhcpExtendedSvrParametersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30DhcpExtendedSvrParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required for the
|
|
Dhcp Svr. Parameters."
|
|
::= { arrisCmDoc30DhcpExtended 6}
|
|
|
|
arrisCmDoc30DhcpExtendedSvrParametersEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30DhcpExtendedSvrParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required for the
|
|
Dhcp Svr. Parameters."
|
|
INDEX { arrisCmDoc30DhcpExtendedSvrParametersIndex }
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersTable 1 }
|
|
|
|
ArrisCmDoc30DhcpExtendedSvrParametersEntry ::= SEQUENCE {
|
|
arrisCmDoc30DhcpExtendedSvrParametersIndex INTEGER,
|
|
arrisCmDoc30DhcpExtendedSvrParametersType INTEGER,
|
|
arrisCmDoc30DhcpExtendedState INTEGER,
|
|
arrisCmDoc30DhcpExtendedPrimaryDhcpServerIpAddr InetAddress,
|
|
arrisCmDoc30DhcpExtendedTftpSvrIpAddr InetAddress,
|
|
arrisCmDoc30DhcpExtendedTimeSvrIpAddr InetAddress,
|
|
arrisCmDoc30DhcpExtendedCmTimeOffset INTEGER,
|
|
arrisCmDoc30DhcpExtendedPrimaryTeleDhcpSvr InetAddress,
|
|
arrisCmDoc30DhcpExtendedSecondaryTeleDhcpSvr InetAddress,
|
|
arrisCmDoc30DhcpExtendedSrvDUIDV6 DisplayString
|
|
|
|
}
|
|
|
|
arrisCmDoc30DhcpExtendedSvrParametersIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index used to order the arrisCmDoc30DhcpExtendedSvrParametersTable entries."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 1 }
|
|
|
|
arrisCmDoc30DhcpExtendedSvrParametersType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dhcpv4 (0),
|
|
dhcpv6 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib displays the Dhcp Type(dhcpv4,dhcpv6)."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 2 }
|
|
|
|
arrisCmDoc30DhcpExtendedState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
init-selecting (0),
|
|
requesting (1),
|
|
bound (2),
|
|
renewing (3),
|
|
rebinding (4),
|
|
init-reboot (5),
|
|
renew-requested (6),
|
|
released (7),
|
|
dhcp6c-init (8),
|
|
dhcp6c-solicit (9),
|
|
dhcp6c-inforeq (10),
|
|
dhcp6c-request (11),
|
|
dhcp6c-renew (12),
|
|
dhcp6c-rebind (13),
|
|
dhcp6c-release (14),
|
|
dhcp6c-decline (15),
|
|
dhcp6c-confirm (16),
|
|
dhcp6c-idle (17)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current Dhcp state of the CM."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 3 }
|
|
|
|
arrisCmDoc30DhcpExtendedPrimaryDhcpServerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the primary Dhcp server address."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 4 }
|
|
|
|
arrisCmDoc30DhcpExtendedTftpSvrIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current Tftp Server IP address in use."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 5 }
|
|
|
|
arrisCmDoc30DhcpExtendedTimeSvrIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current Time server IP address in use."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 6 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmTimeOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current Time offset being used by the CM."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 7 }
|
|
|
|
arrisCmDoc30DhcpExtendedPrimaryTeleDhcpSvr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the primary MTA Dhcp server address."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 8 }
|
|
|
|
arrisCmDoc30DhcpExtendedSecondaryTeleDhcpSvr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the secondary MTA Dhcp server address."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 9 }
|
|
|
|
arrisCmDoc30DhcpExtendedSrvDUIDV6 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"server DUID."
|
|
::= { arrisCmDoc30DhcpExtendedSvrParametersEntry 10 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmParametersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30DhcpExtendedCmParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required for the
|
|
DHCP cm Parameters."
|
|
::= { arrisCmDoc30DhcpExtended 7}
|
|
|
|
arrisCmDoc30DhcpExtendedCmParametersEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30DhcpExtendedCmParametersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all the MIB variables required for the
|
|
DHCP cm Parameters."
|
|
INDEX { arrisCmDoc30DhcpExtendedCmParametersIndex }
|
|
::= { arrisCmDoc30DhcpExtendedCmParametersTable 1 }
|
|
|
|
ArrisCmDoc30DhcpExtendedCmParametersEntry ::= SEQUENCE {
|
|
arrisCmDoc30DhcpExtendedCmParametersIndex INTEGER,
|
|
arrisCmDoc30DhcpExtendedCmParametersType INTEGER,
|
|
arrisCmDoc30DhcpExtendedCmIpAddr InetAddress,
|
|
arrisCmDoc30DhcpExtendedCmSubNetMask InetAddress,
|
|
arrisCmDoc30DhcpExtendedCmPrefix INTEGER,
|
|
arrisCmDoc30DhcpExtendedCmGatewayIpAddr InetAddress,
|
|
arrisCmDoc30DhcpExtendedCmConfigFile SnmpAdminString,
|
|
arrisCmDoc30DhcpExtendedCmDUIDV6 DisplayString
|
|
}
|
|
|
|
arrisCmDoc30DhcpExtendedCmParametersIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index used to order the arrisCmDoc30DhcpExtendedCmParametersTable entries."
|
|
::= { arrisCmDoc30DhcpExtendedCmParametersEntry 1 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmParametersType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dhcpv4 (0),
|
|
dhcpv6 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib displays the Dhcp Type(dhcpv4,dhcpv6)."
|
|
::= { arrisCmDoc30DhcpExtendedCmParametersEntry 2 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the currently leased IP address ."
|
|
::= { arrisCmDoc30DhcpExtendedCmParametersEntry 3 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmSubNetMask OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current IP subnet mask in use."
|
|
::= {arrisCmDoc30DhcpExtendedCmParametersEntry 4 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmPrefix OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current IP Prefix in use."
|
|
::= {arrisCmDoc30DhcpExtendedCmParametersEntry 5 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmGatewayIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the current IP gateway address in use."
|
|
::= { arrisCmDoc30DhcpExtendedCmParametersEntry 6 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmConfigFile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This displays the CM configuration file to be retrived."
|
|
::= { arrisCmDoc30DhcpExtendedCmParametersEntry 7 }
|
|
|
|
arrisCmDoc30DhcpExtendedCmDUIDV6 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CM DUID."
|
|
::= { arrisCmDoc30DhcpExtendedCmParametersEntry 8 }
|
|
|
|
arrisCmDoc30DhcpExtendedDnsSvrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30DhcpExtendedDnsSvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains information for DNS Servers."
|
|
::= { arrisCmDoc30DhcpExtended 8 }
|
|
|
|
arrisCmDoc30DhcpExtendedDnsSvrEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30DhcpExtendedDnsSvrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table contains information for DNS Servers."
|
|
INDEX { arrisCmDoc30DhcpExtendedDnsSvrIPIndex }
|
|
::= { arrisCmDoc30DhcpExtendedDnsSvrTable 1 }
|
|
|
|
ArrisCmDoc30DhcpExtendedDnsSvrEntry ::= SEQUENCE {
|
|
arrisCmDoc30DhcpExtendedDnsSvrIPIndex Unsigned32,
|
|
arrisCmDoc30DhcpExtendedDnsSvrIPAddrType INTEGER,
|
|
arrisCmDoc30DhcpExtendedDnsSvrIPAddr InetAddress
|
|
}
|
|
|
|
arrisCmDoc30DhcpExtendedDnsSvrIPIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DNS Servers IP Index."
|
|
::= { arrisCmDoc30DhcpExtendedDnsSvrEntry 1 }
|
|
|
|
arrisCmDoc30DhcpExtendedDnsSvrIPAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dhcpv4 (0),
|
|
dhcpv6 (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This mib displays the Dhcp Type(dhcpv4,dhcpv6)."
|
|
::= { arrisCmDoc30DhcpExtendedDnsSvrEntry 2 }
|
|
|
|
arrisCmDoc30DhcpExtendedDnsSvrIPAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address for DNS Servers."
|
|
::= { arrisCmDoc30DhcpExtendedDnsSvrEntry 3 }
|
|
|
|
-- arrisCmDoc30IfBaseObjectsExtended MIB objects --
|
|
|
|
arrisCmDoc30IfUpstreamChannelExtendedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArrisCmDoc30IfUpstreamChannelExtendedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table Extends to describe the attributes of attached upstream
|
|
channels."
|
|
::= { arrisCmDoc30IfBaseObjectsExtended 2 }
|
|
|
|
arrisCmDoc30IfUpstreamChannelExtendedEntry OBJECT-TYPE
|
|
SYNTAX ArrisCmDoc30IfUpstreamChannelExtendedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Extended list of attributes for a single upstream channel, like
|
|
Symbol Rate, Modulation and so on."
|
|
INDEX { ifIndex }
|
|
::= { arrisCmDoc30IfUpstreamChannelExtendedTable 1 }
|
|
|
|
ArrisCmDoc30IfUpstreamChannelExtendedEntry ::= SEQUENCE {
|
|
arrisCmDoc30IfUpChannelExtendedId Integer32,
|
|
arrisCmDoc30IfUpChannelExtendedSymbolRate Integer32,
|
|
arrisCmDoc30IfUpChannelExtendedModulation INTEGER
|
|
}
|
|
|
|
arrisCmDoc30IfUpChannelExtendedId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CMTS identification of the upstream channel."
|
|
::= { arrisCmDoc30IfUpstreamChannelExtendedEntry 1 }
|
|
|
|
arrisCmDoc30IfUpChannelExtendedSymbolRate OBJECT-TYPE
|
|
SYNTAX Integer32 (0..160000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Symbol Rate in kSym/s of this upstream interface.
|
|
This object returns 0 if the interface symbol rate is
|
|
undefined or unknown."
|
|
::= { arrisCmDoc30IfUpstreamChannelExtendedEntry 2 }
|
|
|
|
arrisCmDoc30IfUpChannelExtendedModulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qpsk (1),
|
|
qam8 (2),
|
|
qam16 (3),
|
|
qam32 (4),
|
|
qam64 (5),
|
|
qam128 (6),
|
|
qam256 (7),
|
|
err (-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modulation type of this upstream interface, This object returns
|
|
err(-1) if the interface modulation is undefined or unknown."
|
|
::= { arrisCmDoc30IfUpstreamChannelExtendedEntry 3 }
|
|
|
|
-- arrisCmDoc30PingMgmt MIB objects --
|
|
|
|
arrisCmDoc30PingTargetAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of internet address used for arrisRouterPingTargetAddress.
|
|
|
|
This object may be changed while a ping is in progress."
|
|
DEFVAL { ipv4 }
|
|
::= { arrisCmDoc30PingMgmt 1 }
|
|
|
|
arrisCmDoc30PingTargetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the internet address of the entity to be pinged. Note that if
|
|
an all-zeros value is specified for this object, then the ping will
|
|
be sent to the default gateway, if one exists.
|
|
|
|
This object may be changed while a ping is in progress."
|
|
::= { arrisCmDoc30PingMgmt 2 }
|
|
|
|
arrisCmDoc30PingNumPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the client to set the number of pings to be sent. This can be
|
|
set to any number between 1 and (2^32 - 1), or can be set to 'infinite'
|
|
by setting the value to 0.
|
|
|
|
Note that if set to infinite, then the ping must be stopped explicitly
|
|
in order to get it to stop.
|
|
|
|
This object may be changed while a ping is in progress."
|
|
DEFVAL { 3 }
|
|
::= { arrisCmDoc30PingMgmt 3 }
|
|
|
|
arrisCmDoc30PingPktSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (64..1518)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the client to set the initial size of the ping packets that will
|
|
be sent. This size includes the LLC header, IP header, ICMP header,
|
|
and the CRC32 at the end. You must specify values between 64 and 1518,
|
|
which are the min and max size Ethernet frames.
|
|
|
|
This object may be changed while a ping is in progress."
|
|
DEFVAL { 64 }
|
|
::= { arrisCmDoc30PingMgmt 4 }
|
|
|
|
arrisCmDoc30PingInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the client to set the amount of time (in milliseconds) that the
|
|
device will sleep before sending a ping. Generally, this is the time
|
|
between when a ping reply is received and when the next ping will be
|
|
sent.
|
|
|
|
Note that the amount of time between sending one ping and sending the
|
|
next ping varies depending on whether or not you enable waiting for
|
|
replies, and how long it takes to receive the reply.
|
|
|
|
If waiting for replies is disabled, then this is the time between
|
|
sending one ping and sending the next ping.
|
|
|
|
This object may be changed while a ping is in progress."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30PingMgmt 5 }
|
|
|
|
arrisCmDoc30PingTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..65535)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the client to set the amount of time (in milliseconds) that the
|
|
device should wait for a reply after sending a ping.
|
|
|
|
If set to any non-negative value, then the device will send a ping and
|
|
wait for a response for the specified amount of time. Event if
|
|
set to 0, the thread will check for and process a reply packet.
|
|
|
|
If set to -1, then the device will not wait at all, and won't even
|
|
check for any replies.
|
|
|
|
This object may be changed while a ping is in progress."
|
|
DEFVAL { 5000 }
|
|
::= { arrisCmDoc30PingMgmt 6 }
|
|
|
|
arrisCmDoc30PingVerifyReply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/disables verification of ping replies. If enabled, and if
|
|
waiting for replies is enabled, then if a reply is received, it will
|
|
verify that it matches the ping that was sent, and that all of the
|
|
data is intact.
|
|
|
|
This object may be changed while a ping is in progress."
|
|
DEFVAL { true }
|
|
::= { arrisCmDoc30PingMgmt 7 }
|
|
|
|
arrisCmDoc30PingIpStackNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the client to select the IP stack from which the pings will be
|
|
sent. Specifying 0 means that the pings will be sent from the same IP
|
|
stack on which this MIB is hosted.
|
|
|
|
This object may not be changed while a ping is in progress."
|
|
DEFVAL { 300 }
|
|
::= { arrisCmDoc30PingMgmt 8 }
|
|
|
|
arrisCmDoc30PingStartStop OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Starts or stops the pings, as well as indicating whether a ping is in
|
|
progress when read. If a ping is already in progress and this object
|
|
is set to true(1), then the ping will continue but the ping statistics
|
|
will be reset.
|
|
|
|
This object may be changed while a ping is in progress."
|
|
DEFVAL { true }
|
|
::= { arrisCmDoc30PingMgmt 9 }
|
|
|
|
arrisCmDoc30PingPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of packets sent since the ping was started."
|
|
::= { arrisCmDoc30PingMgmt 10 }
|
|
|
|
arrisCmDoc30PingRepliesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of replies received since the ping was started."
|
|
::= { arrisCmDoc30PingMgmt 11 }
|
|
|
|
arrisCmDoc30PingRepliesVerified OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the number of replies which were verified since the ping was
|
|
started."
|
|
::= { arrisCmDoc30PingMgmt 12 }
|
|
|
|
arrisCmDoc30PingOctetsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the total number of octets that have been sent in pings
|
|
since the ping was started."
|
|
::= { arrisCmDoc30PingMgmt 13 }
|
|
|
|
arrisCmDoc30PingOctetsReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the total number of octets that have been sent in pings
|
|
since the ping was started."
|
|
::= { arrisCmDoc30PingMgmt 14 }
|
|
|
|
arrisCmDoc30PingIcmpErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the total ICMP errors which have been received since the
|
|
ping was started."
|
|
::= { arrisCmDoc30PingMgmt 15 }
|
|
|
|
arrisCmDoc30PingLastIcmpError OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates value of the last ICMP error which was received, if any. If
|
|
there have been no errors, this object will have a value of 0."
|
|
::= { arrisCmDoc30PingMgmt 16 }
|
|
|
|
arrisCmDoc30PingAverageRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current average ping round-trip-time (RTT)."
|
|
::= { arrisCmDoc30PingMgmt 17 }
|
|
|
|
arrisCmDoc30PingMinRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum ping round-trip-time (RTT) received. A value
|
|
of 0 for this object implies that no RTT has been received."
|
|
::= { arrisCmDoc30PingMgmt 18 }
|
|
|
|
arrisCmDoc30PingRepliesMaxRtt OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum ping round-trip-time (RTT) received. A value
|
|
of 0 for this object implies that no RTT has been received."
|
|
::= { arrisCmDoc30PingMgmt 19 }
|
|
|
|
-- arrisCmDoc30TraceRtMgmt MIB objects --
|
|
|
|
arrisCmDoc30TraceRtTargAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of internet address used for arrisRouterTraceRtTargetAddress."
|
|
DEFVAL { ipv4 }
|
|
::= { arrisCmDoc30TraceRtMgmt 1 }
|
|
|
|
arrisCmDoc30TraceRtTargetAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the internet address of the entity for the trace route."
|
|
::= { arrisCmDoc30TraceRtMgmt 2 }
|
|
|
|
arrisCmDoc30TraceRtMaxHops OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of hops for the trace route"
|
|
::= { arrisCmDoc30TraceRtMgmt 3 }
|
|
|
|
arrisCmDoc30TraceRtDataSize OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The data size of the trace route packet"
|
|
::= { arrisCmDoc30TraceRtMgmt 4 }
|
|
|
|
arrisCmDoc30TraceRtResolveHosts OBJECT-TYPE
|
|
SYNTAX INTEGER { noResolve(0), resolve(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Whether or not to resolve host names"
|
|
DEFVAL { resolve }
|
|
::= { arrisCmDoc30TraceRtMgmt 5 }
|
|
|
|
arrisCmDoc30TraceRtBasePort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Base port to use for trace route"
|
|
::= { arrisCmDoc30TraceRtMgmt 6 }
|
|
|
|
arrisCmDoc30TraceRtStart OBJECT-TYPE
|
|
SYNTAX INTEGER { traceRouteNotRunning(0), traceRouteRunning(1), startTrace(10) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start a running trace route. Will return traceRouteRunning(0) if a trace route is currently running. "
|
|
::= { arrisCmDoc30TraceRtMgmt 7 }
|
|
|
|
arrisCmDoc30TraceRtLog OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The most recent output log for trace route. Up to 255 bytes. Individual lines are separated by a newline \n"
|
|
::= { arrisCmDoc30TraceRtMgmt 8 }
|
|
|
|
arrisCmDoc30TraceRtTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..60)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the time-out value, in seconds, for
|
|
a traceroute request."
|
|
DEFVAL { 3 }
|
|
::= { arrisCmDoc30TraceRtMgmt 9 }
|
|
|
|
arrisCmDoc30TraceRtDiffServ OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the value to store in the Type of Service
|
|
(TOS) octet in the IPv4 header or in the Traffic
|
|
Class octet in the IPv6 header, respectively, of the
|
|
IP packet used to encapsulate the traceroute probe.
|
|
|
|
The octet to be set in the IP header contains the
|
|
Differentiated Services (DS) Field in the six most
|
|
significant bits.
|
|
|
|
This option can be used to determine what effect an
|
|
explicit DS Field setting has on a traceroute response.
|
|
Not all values are legal or meaningful. A value of 0
|
|
means that the function represented by this option is
|
|
not supported. DS Field usage is often not supported
|
|
by IP implementations, and not all values are supported.
|
|
Refer to RFC 2474 and RFC 3260 for guidance on usage of
|
|
this field."
|
|
REFERENCE
|
|
"Refer to RFC 1812 for the definition of the IPv4 TOS
|
|
octet and to RFC 2460 for the definition of the IPv6
|
|
Traffic Class octet. Refer to RFC 2474 and RFC 3260
|
|
for the definition of the Differentiated Services Field."
|
|
DEFVAL { 0 }
|
|
::= { arrisCmDoc30TraceRtMgmt 10 }
|
|
|
|
END
|
|
|