Observium_CE/mibs/aricent/DHCP-SNOOPING-MIB

379 lines
14 KiB
Plaintext

-- Copyright (C) 2007-2012 Aricent Group . All Rights Reserved
-- $Id: fsdhcsnp.mib,v 1.3 2012/09/07 09:52:05 siva Exp $
-- L2DHCPSNOOPING Proprietary MIB Definition
-- This MIB contains scalars and tables used to configure a switch running
-- L2 DHCP SNOOPING.
DHCP-SNOOPING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
enterprises, Counter32, Integer32 FROM SNMPv2-SMI
RowStatus FROM SNMPv2-TC;
fsdhcpsnp MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO "support@aricent.com"
DESCRIPTION
" The proprietary MIB module is for configuration of DHCP
snooping feature. DHCP snooping provides security between the
untrusted hosts and DHCP servers, by filtering the Untrusted DHCP
packets which is received from out of the network and also updates
the IP binding database present in the IPDB module. "
REVISION "201209050000Z"
DESCRIPTION
" Modifications are done in descriptions in some places to be
more clear ."
::= { enterprises aricent-communication-holding-ltd(29601)
iss(2) 3 }
-- ***************************************************************************
-- Groups in the MIB
-- ***************************************************************************
fsDhcpSnpScalars OBJECT IDENTIFIER ::= { fsdhcpsnp 1 }
fsDhcpSnpInterface OBJECT IDENTIFIER ::= { fsdhcpsnp 2 }
-- ***************************************************************************
-- SCALARS
-- ***************************************************************************
fsDhcpSnpSnoopingAdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Layer2 DHCP Snooping globally in the system.
When set to 'enabled', the DHCP Snooping Module will start the
protocol operation. Layer2 DHCP Snooping should be enabled on
per VLAN basis also. When set to 'disabled', the DHCP Snooping
Module will stop the protocol operation."
DEFVAL { disabled }
::= { fsDhcpSnpScalars 1 }
fsDhcpSnpMacVerifyStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the MAC address verification. If this option
is enabled, the Layer2 DHCPv4/v6 snooping module will verify the
source MAC Address against the client hardware address in the
DHCP packets received."
DEFVAL { enabled }
::= { fsDhcpSnpScalars 2 }
fsDhcpSnpV6AdminStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Layer2 DHCPv6 Snooping globally in the system.
When set to 'enabled', the DHCPv6 Snooping Module will start the
protocol operation. Layer2 DHCPv6 Snooping should be enabled on
per VLAN basis also. When set to 'disabled', the DHCP Snooping
Module will stop the protocol operation."
DEFVAL { 2 }
::= { fsDhcpSnpScalars 3 }
fsDhcpSnpTraceValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask which is used to enable selective debug levels in
DHCPv4/v6 Snooping module.Each allowed BIT in the integer, represents
a particular level of Trace.The mapping between the bit
positions & the level of trace is as follows:
1 - Entry Trace
2 - Exit Trace
3 - Debug Trace
4 - Failure Trace
6 - Packet Trace
7 - Critical Trace.
all - All trace is a combination of all traces."
DEFVAL { 7 }
::= { fsDhcpSnpScalars 4 }
fsDhcpSnpV6EnterpriseId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the Enterprise Id parameter. When
the operator configures the enterprise-number, it will be used
in the enterprise-id field in DHCPV6 remote-id option (37)
By Default, enterprise number MUST be set to the Broadband Forum
enterprise code, i.e. 3561 in decimal "
DEFVAL { 3561 }
::= { fsDhcpSnpScalars 5 }
-- ***************************************************************************
-- GROUPS
-- ***************************************************************************
-- **************************** VLAN Entry ******************************
fsDhcpSnpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsDhcpSnpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration & statistics collection
parameters of DHCP snooping on a specific VLAN. "
::= { fsDhcpSnpInterface 1 }
fsDhcpSnpInterfaceEntry OBJECT-TYPE
SYNTAX FsDhcpSnpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row instance gives the DHCP snooping status on VLAN and the
statistics collected in that VLAN for the DHCP snooping module"
INDEX { fsDhcpSnpVlanId }
::= { fsDhcpSnpInterfaceTable 1 }
FsDhcpSnpInterfaceEntry ::= SEQUENCE {
fsDhcpSnpVlanId Integer32,
fsDhcpSnpVlanSnpStatus INTEGER,
fsDhcpSnpRxDiscovers Counter32,
fsDhcpSnpRxRequests Counter32,
fsDhcpSnpRxReleases Counter32,
fsDhcpSnpRxDeclines Counter32,
fsDhcpSnpRxInforms Counter32,
fsDhcpSnpTxOffers Counter32,
fsDhcpSnpTxAcks Counter32,
fsDhcpSnpTxNaks Counter32,
fsDhcpSnpNoOfDiscards Counter32,
fsDhcpSnpMacDiscards Counter32,
fsDhcpSnpServerDiscards Counter32,
fsDhcpSnpOptionDiscards Counter32,
fsDhcpSnpInterfaceStatus RowStatus,
fsDhcpSnpV6VlanSnpStatus INTEGER,
fsDhcpSnpV6RxClientPkts Counter32,
fsDhcpSnpV6TxClientPkts Counter32,
fsDhcpSnpV6TxRelayForwards Counter32,
fsDhcpSnpV6RxRelayReplys Counter32,
fsDhcpSnpV6PktDrops Counter32,
fsDhcpSnpV6ClearStatistics INTEGER
}
fsDhcpSnpVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan ID of the VLAN to which this table-entry is associated."
::= { fsDhcpSnpInterfaceEntry 1 }
fsDhcpSnpVlanSnpStatus OBJECT-TYPE
SYNTAX INTEGER { enabled (1), disabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"setting this object Enables or disables Layer2 DHCP Snooping
in the given VLAN."
DEFVAL { disabled }
::= { fsDhcpSnpInterfaceEntry 2 }
fsDhcpSnpRxDiscovers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP DISCOVERs received
from the hosts connected to this VLAN."
::= { fsDhcpSnpInterfaceEntry 3 }
fsDhcpSnpRxRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP REQUESTs received from
the hosts connected to this VLAN."
::= { fsDhcpSnpInterfaceEntry 4 }
fsDhcpSnpRxReleases OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP RELEASEs received from
the hosts connected to this VLAN."
::= { fsDhcpSnpInterfaceEntry 5 }
fsDhcpSnpRxDeclines OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP DECLINEs received from
the hosts connected to this VLAN."
::= { fsDhcpSnpInterfaceEntry 6 }
fsDhcpSnpRxInforms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP INFORMs received from
the hosts connected to this VLAN."
::= { fsDhcpSnpInterfaceEntry 7 }
fsDhcpSnpTxOffers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP OFFERs sent out on this
VLAN to hosts."
::= { fsDhcpSnpInterfaceEntry 8 }
fsDhcpSnpTxAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP ACKs sent out on this
VLAN to hosts."
::= { fsDhcpSnpInterfaceEntry 9 }
fsDhcpSnpTxNaks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP NAKs sent out on this
VLAN to hosts."
::= { fsDhcpSnpInterfaceEntry 10 }
fsDhcpSnpNoOfDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP packets from hosts dropped
on this VLAN."
::= { fsDhcpSnpInterfaceEntry 11 }
fsDhcpSnpMacDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP packets from hosts dropped
due to failure in MAC Address verification."
::= { fsDhcpSnpInterfaceEntry 12 }
fsDhcpSnpServerDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP packets from hosts dropped
because they are supposed to be the messages from a server.
The DHCP packets so dropped will include DHCP ACK, DHCP NAK and
DHCP OFFERs received from untrusted host ports."
::= { fsDhcpSnpInterfaceEntry 13 }
fsDhcpSnpOptionDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCP packets from hosts dropped
because either option-82 is present in them or giaddr field is
set."
::= { fsDhcpSnpInterfaceEntry 14 }
fsDhcpSnpInterfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row-Status of the interface entry."
::= { fsDhcpSnpInterfaceEntry 15 }
fsDhcpSnpV6VlanSnpStatus OBJECT-TYPE
SYNTAX INTEGER { enabled (1), disabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to enabled, Layer2 DHCPv6 Snooping will be enabled on this VLAN.
When set to disabled, Layer2 DHCPv6 Snooping will be disabled on this VLAN.."
DEFVAL { 2 }
::= { fsDhcpSnpInterfaceEntry 16 }
fsDhcpSnpV6RxClientPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCPv6 Client packets received
on this VLAN."
::= { fsDhcpSnpInterfaceEntry 17 }
fsDhcpSnpV6TxClientPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCPv6 packets sent out on this VLAN
to the client."
::= { fsDhcpSnpInterfaceEntry 18 }
fsDhcpSnpV6TxRelayForwards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCPv6 RELAY-FORWARDs sent out on this VLAN
to the server."
::= { fsDhcpSnpInterfaceEntry 19 }
fsDhcpSnpV6RxRelayReplys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCPv6 RELAY-REPLY messages received on this VLAN
from the server."
::= { fsDhcpSnpInterfaceEntry 20 }
fsDhcpSnpV6PktDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of DHCPv6 packets discarded
on this vlan."
::= { fsDhcpSnpInterfaceEntry 21 }
fsDhcpSnpV6ClearStatistics OBJECT-TYPE
SYNTAX INTEGER { enabled (1), disabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to enabled, resets all statistics counter values to zero
on particular VLAN. After resetting the statistics counter values,
the value of this object automatically switches back to 'disabled'.
When set to disabled, this object has no effect. "
DEFVAL { 2 }
::= { fsDhcpSnpInterfaceEntry 22 }
END