WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/aricent/AricentMIVlan-MIB

2291 lines
85 KiB
Plaintext
Raw Blame History

-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved
-- $Id: fsmpvlan.mib,v 1.43.24.1 2018/03/26 11:33:14 siva Exp $
AricentMIVlan-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,MODULE-IDENTITY, Integer32, Unsigned32,
NOTIFICATION-TYPE,
enterprises,Counter32,IpAddress FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION, MacAddress,
TruthValue,DisplayString FROM SNMPv2-TC
fsDot1qTpFdbPort FROM ARICENTQ-BRIDGE-MIB
fsDot1qTpFdbEntry FROM ARICENTQ-BRIDGE-MIB
fsDot1qStaticUnicastEntry FROM ARICENTQ-BRIDGE-MIB
fsDot1qVlanStaticEntry FROM ARICENTQ-BRIDGE-MIB
VlanIdOrNone FROM Q-BRIDGE-MIB
fsDot1qTpPort FROM ARICENTQ-BRIDGE-MIB
fsDot1qVlanStaticPortConfigEntry FROM ARICENTQ-BRIDGE-MIB;
futureMIVlanMIB MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO "support@aricent.com"
DESCRIPTION "This mib module is for Proprietary
Multiple Instance VLAN mib"
REVISION "201209050000Z"
DESCRIPTION "This mib module is for Proprietary
Multiple Instance VLAN mib"
::= { enterprises futuresoftware(2076) 120 }
VlanId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A 12-bit VLAN ID used in the VLAN Tag header."
SYNTAX Integer32 (1..4094)
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
MacLearningStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple MAC learning status value specific to VLAN."
SYNTAX INTEGER { enabled(1), disabled(2), default(3) }
fsMIDot1qFutureVlan OBJECT IDENTIFIER ::= { futureMIVlanMIB 1 }
-- fsMIDot1qFutureVlanTunnelConfig - This sub group contains mib objects for
-- configuring VLAN Stacking (also known 802.1q in 802.1q) feature
-- in FutureVLAN.
fsMIDot1qFutureVlanTunnelConfig OBJECT IDENTIFIER ::= { futureMIVlanMIB 2 }
fsMIDot1qFutureVlanTraps OBJECT IDENTIFIER ::= { futureMIVlanMIB 3 }
fsMIDot1qFutureVlanTrapControl OBJECT IDENTIFIER ::= { futureMIVlanMIB 4 }
-- fsMIDot1qFutureVlan group
fsMIDot1qFutureVlanGlobalTrace OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the global trace in VLAN."
::= { fsMIDot1qFutureVlan 1 }
fsMIDot1qFutureVlanGlobalsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanGlobalsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of per virtual context Vlan Module Parameters."
::= { fsMIDot1qFutureVlan 2 }
fsMIDot1qFutureVlanGlobalsEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanGlobalsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per virtual context Vlan module parmaters."
INDEX { fsMIDot1qFutureVlanContextId }
::= { fsMIDot1qFutureVlanGlobalsTable 1 }
FsMIDot1qFutureVlanGlobalsEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanContextId
Integer32,
fsMIDot1qFutureVlanStatus
EnabledStatus,
fsMIDot1qFutureVlanMacBasedOnAllPorts
EnabledStatus,
fsMIDot1qFutureVlanPortProtoBasedOnAllPorts
EnabledStatus,
fsMIDot1qFutureVlanShutdownStatus
TruthValue,
fsMIDot1qFutureGarpShutdownStatus
TruthValue,
fsMIDot1qFutureVlanDebug
Integer32,
fsMIDot1qFutureVlanLearningMode
INTEGER,
fsMIDot1qFutureVlanHybridTypeDefault
INTEGER,
fsMIDot1qFutureVlanOperStatus
EnabledStatus,
fsMIDot1qFutureGvrpOperStatus
EnabledStatus,
fsMIDot1qFutureGmrpOperStatus
EnabledStatus,
fsMIDot1qFutureVlanContextName
DisplayString,
fsMIDot1qFutureGarpDebug
Integer32,
fsMIDot1qFutureUnicastMacLearningLimit
Unsigned32,
fsMIDot1qFutureBaseBridgeMode
INTEGER,
fsMIDot1qFutureVlanSubnetBasedOnAllPorts
EnabledStatus,
fsMIDot1qFutureVlanGlobalMacLearningStatus
EnabledStatus,
fsMIDot1qFutureVlanApplyEnhancedFilteringCriteria
TruthValue,
fsMIDot1qFutureVlanGlobalsFdbFlush
TruthValue,
fsMIDot1qFutureVlanUserDefinedTPID
Integer32,
fsMIDot1qFutureVlanRemoteFdbFlush
TruthValue
}
fsMIDot1qFutureVlanContextId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the virtual context in the system."
::= { fsMIDot1qFutureVlanGlobalsEntry 1 }
fsMIDot1qFutureVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the Vlan
feature. The value enabled(1) indicates that Vlan should be enabled
in the device on all ports. The value disabled(2) indicates that
Vlan should be disabled in the device on all ports. The object can
be set to disabled if and only if, fsMIDot1qGvrpStatus and
fsMIDot1dGmrpStatus are disabled. The object should NOT be enabled
before setting 'fsMIDot1qFutureVlanType'. Setting this object will
affect the operational status of the VLAN module
(fsMIDot1qFutureVlanOperStatus)."
::= { fsMIDot1qFutureVlanGlobalsEntry 2 }
fsMIDot1qFutureVlanMacBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is only used to enable/disable the mac based type on all
ports of fsMIDot1qFutureVlanPortMacBasedClassification"
::= { fsMIDot1qFutureVlanGlobalsEntry 3 }
fsMIDot1qFutureVlanPortProtoBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is only used to enable/disable the port protocol based
type on all ports of
fsMIDot1qFutureVlanPortPortProtoBasedClassification"
::= { fsMIDot1qFutureVlanGlobalsEntry 4 }
fsMIDot1qFutureVlanShutdownStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The administrative shutdown status requested by management for Vlan
The value true(1) indicates that Vlan should be shutdown
in the device on all ports. All memory will be released.
The value false(2) indicates that Vlan should be active in the device
on all ports."
DEFVAL { false }
::= { fsMIDot1qFutureVlanGlobalsEntry 5 }
fsMIDot1qFutureGarpShutdownStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for GARP
The value true(1) indicates that GARP should be shutdown
in the device on all ports. All memory will be released.
The value false(2) indicates that GARP should be active in
the device on all ports. This object can be set to true only
when none of the Garp applications (GVRP, GMRP) are enabled.
Whenever Garp is enabled after shutdown, Gvrp and Gmrp must
be enabled explicitly.By default this value is false(2) for default
context and is true for other contexts."
::= { fsMIDot1qFutureVlanGlobalsEntry 6 }
fsMIDot1qFutureVlanDebug OBJECT-TYPE
SYNTAX Integer32 (0..524287)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the tracing in the selected submodule in VLAN. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Different submodule Tracing -
BIT 16 - Tracing in VLAN module.
BIT 17 - Tracing in VLAN Priority module.
BIT 18 - Tracing in VLAN Redundancy module.
The remaining bits are reserved. The combination of levels and
submodules are allowed i.e. Tracing can be allowed at all failure
and data path level in All submodules by setting the BIT
appropriately.
For Example, setting the debug value to the following bit stream,
00000000000000010000000000000100 will enable data path trace
prints in VLAN module. Multiple submodules and multiple levels can
be combined by setting the corresponding bits.
For Example, setting the debug value to the following bit stream,
00000000000000110000000000001100 will enable data path and
control plane trace prints in VLAN and VLAN Priority modules.
Note : BIT0 is the least significant bit and BIT31 is the most
significant bit."
::= { fsMIDot1qFutureVlanGlobalsEntry 7 }
fsMIDot1qFutureVlanLearningMode OBJECT-TYPE
SYNTAX INTEGER {
ivl (1),
svl (2),
hybrid (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Type of VLAN learning mode.
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
associated with old fid will get deleted."
DEFVAL { ivl }
::= { fsMIDot1qFutureVlanGlobalsEntry 8 }
fsMIDot1qFutureVlanHybridTypeDefault OBJECT-TYPE
SYNTAX INTEGER {
ivl(1),
svl(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default learning mode of the switch if
fsMIDot1qFutureVlanLearningMode is hvl (3).
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
associated with old fid will get deleted."
DEFVAL { ivl }
::= { fsMIDot1qFutureVlanGlobalsEntry 9 }
fsMIDot1qFutureVlanOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the Vlan module.
The value enabled(1) indicates that Vlan module is currently enabled
in the device.
The value disabled(2) indicates that Vlan module is currently disabled
in the device."
::= { fsMIDot1qFutureVlanGlobalsEntry 10 }
fsMIDot1qFutureGvrpOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the GVRP module.
The value enabled(1) indicates that GVRP module is currently enabled
in the device.
The value disabled(2) indicates that GVRP module is currently disabled
in the device."
::= { fsMIDot1qFutureVlanGlobalsEntry 11 }
fsMIDot1qFutureGmrpOperStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the GMRP module.
The value enabled(1) indicates that GMRP module is currently enabled
in the device.
The value disabled(2) indicates that GMRP module is currently disabled
in the device."
::= { fsMIDot1qFutureVlanGlobalsEntry 12 }
fsMIDot1qFutureVlanContextName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the virtual context."
::= { fsMIDot1qFutureVlanGlobalsEntry 13 }
fsMIDot1qFutureGarpDebug OBJECT-TYPE
SYNTAX Integer32 (0..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the tracing in the selected submodule in GARP. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Different submodule Tracing -
BIT 16 - Tracing in GARP module.
BIT 17 - Tracing in GMRP module.
BIT 18 - Tracing in GVRP module.
BIT 19 - Tracing in GARP Redundancy module.
The remaining bits are reserved. The combination of levels and
submodules are allowed i.e. Tracing can be allowed at all failure
and data path level in All submodules by setting the BIT
appropriately.
For Example, setting the debug value to the following bit stream,
00000000000000010000000000000100 will enable data path trace
prints in GARP module. Multiple submodules and multiple levels can
be combined by setting the corresponding bits.
For Example, setting the debug value to the following bit stream,
00000000000001010000000000001100 will enable data path and
control plane trace prints in GARP and GVRP modules.
Note : BIT0 is the least significant bit and BIT31 is the most
significant bit."
DEFVAL { 0 }
::= { fsMIDot1qFutureVlanGlobalsEntry 14 }
fsMIDot1qFutureUnicastMacLearningLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Limiting value on the number of distinct unicast MAC addresses
that can be learnt in the specified virtual context.
The upper limit value that can be SET for this object is determined
by the underlying hardware. The value that can be SET for this object
cannot be less than the value set for the UnicastMacLimit per vlan for
any of the vlans in the specified virtual context."
::= { fsMIDot1qFutureVlanGlobalsEntry 15 }
fsMIDot1qFutureBaseBridgeMode OBJECT-TYPE
SYNTAX INTEGER
{
dot1dTransparentMode(1),
dot1qVlanMode(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Base Bridge-Mode of the Switch.
Setting the value to transparent mode will make
switch behave according to IEEE 802.1d implementation.
Setting the value to VLAN mode will make switch behave
according to IEEE 802.1q Implementation"
::= { fsMIDot1qFutureVlanGlobalsEntry 16 }
fsMIDot1qFutureVlanSubnetBasedOnAllPorts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the subnet based VLAN Classification
on all ports of dot1qFutureVlanPortSubnetBasedClassification. On setting
this object to enable/disable status, Subnet based VLAN classification
will be enabled/disabled on all the ports."
::= { fsMIDot1qFutureVlanGlobalsEntry 17 }
fsMIDot1qFutureVlanGlobalMacLearningStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the global MAC learning status of the
switch. The default value of global mac learning status of
the switch is enabled.
This object can take only two values enabled or disabled.
The value as specified by this object will be applied
for a newly created VLAN. The configuration of this object
will override the value of fsMIDot1qFutureVlanAdminMacLearningStatus
provided the value of fsMIDot1qFutureVlanAdminMacLearningStatus is
default only."
DEFVAL {enabled}
::= { fsMIDot1qFutureVlanGlobalsEntry 18 }
fsMIDot1qFutureVlanApplyEnhancedFilteringCriteria OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set as 'false', then only default filtering
utility criteria will be applied on all ports in this context.
Otherwise the filtering criteria to be used for the ports in this
context will be taken from fsMIDot1qFutureVlanFilteringUtilityCriteria
for the respective ports.
- It is recommended to configure this object before doing any port
to virtual context mapping in the system."
DEFVAL {true}
::= { fsMIDot1qFutureVlanGlobalsEntry 19 }
fsMIDot1qFutureVlanGlobalsFdbFlush OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set as 'true', then all the dynamically learnt
MAC addresses in this context are removed.After flush this object
is set to 'false'"
DEFVAL {false}
::= { fsMIDot1qFutureVlanGlobalsEntry 20 }
fsMIDot1qFutureVlanUserDefinedTPID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets the value for the user defined TPID configurable
for an Ingress port or for a VLAN Egress Ethertype.
A value ZERO deletes the configured entry."
DEFVAL { 0 }
::= { fsMIDot1qFutureVlanGlobalsEntry 21 }
-- ----------------------------------------------------------------------------
-- Flush FDB entries learnt from remote MC-LAG node
-- ----------------------------------------------------------------------------
fsMIDot1qFutureVlanRemoteFdbFlush OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set as 'true', then all the MAC addresses
learnt from remote MC-LAG node will be removed. After flush, this object
is reset to 'false'."
DEFVAL { false }
::= { fsMIDot1qFutureVlanGlobalsEntry 22 }
-- -------------------------------------------------------------------------
-- Future Vlan Port Table
-- -------------------------------------------------------------------------
fsMIDot1qFutureVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing the port type information."
::= { fsMIDot1qFutureVlan 3 }
fsMIDot1qFutureVlanPortEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry indicating the type of the port."
INDEX { fsMIDot1qFutureVlanPort }
::= { fsMIDot1qFutureVlanPortTable 1 }
FsMIDot1qFutureVlanPortEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanPort Integer32,
fsMIDot1qFutureVlanPortType INTEGER,
fsMIDot1qFutureVlanPortMacBasedClassification EnabledStatus,
fsMIDot1qFutureVlanPortPortProtoBasedClassification EnabledStatus,
fsMIDot1qFutureVlanFilteringUtilityCriteria INTEGER,
fsMIDot1qFutureVlanPortProtected TruthValue,
fsMIDot1qFutureVlanPortSubnetBasedClassification EnabledStatus,
fsMIDot1qFutureVlanPortUnicastMacLearning EnabledStatus,
fsMIDot1qFutureVlanPortGmrpJoinEmptyTxCount Counter32,
fsMIDot1qFutureVlanPortGmrpJoinEmptyRxCount Counter32,
fsMIDot1qFutureVlanPortGmrpJoinInTxCount Counter32,
fsMIDot1qFutureVlanPortGmrpJoinInRxCount Counter32,
fsMIDot1qFutureVlanPortGmrpLeaveInTxCount Counter32,
fsMIDot1qFutureVlanPortGmrpLeaveInRxCount Counter32,
fsMIDot1qFutureVlanPortGmrpLeaveEmptyTxCount Counter32,
fsMIDot1qFutureVlanPortGmrpLeaveEmptyRxCount Counter32,
fsMIDot1qFutureVlanPortGmrpEmptyTxCount Counter32,
fsMIDot1qFutureVlanPortGmrpEmptyRxCount Counter32,
fsMIDot1qFutureVlanPortGmrpLeaveAllTxCount Counter32,
fsMIDot1qFutureVlanPortGmrpLeaveAllRxCount Counter32,
fsMIDot1qFutureVlanPortGmrpDiscardCount Counter32,
fsMIDot1qFutureVlanPortGvrpJoinEmptyTxCount Counter32,
fsMIDot1qFutureVlanPortGvrpJoinEmptyRxCount Counter32,
fsMIDot1qFutureVlanPortGvrpJoinInTxCount Counter32,
fsMIDot1qFutureVlanPortGvrpJoinInRxCount Counter32,
fsMIDot1qFutureVlanPortGvrpLeaveInTxCount Counter32,
fsMIDot1qFutureVlanPortGvrpLeaveInRxCount Counter32,
fsMIDot1qFutureVlanPortGvrpLeaveEmptyTxCount Counter32,
fsMIDot1qFutureVlanPortGvrpLeaveEmptyRxCount Counter32,
fsMIDot1qFutureVlanPortGvrpEmptyTxCount Counter32,
fsMIDot1qFutureVlanPortGvrpEmptyRxCount Counter32,
fsMIDot1qFutureVlanPortGvrpLeaveAllTxCount Counter32,
fsMIDot1qFutureVlanPortGvrpLeaveAllRxCount Counter32,
fsMIDot1qFutureVlanPortGvrpDiscardCount Counter32,
fsMIDot1qFutureVlanPortFdbFlush TruthValue,
fsMIDot1qFutureVlanPortIngressEtherType Integer32,
fsMIDot1qFutureVlanPortEgressEtherType Integer32,
fsMIDot1qFutureVlanPortEgressTPIDType INTEGER,
fsMIDot1qFutureVlanPortAllowableTPID1 Integer32,
fsMIDot1qFutureVlanPortAllowableTPID2 Integer32,
fsMIDot1qFutureVlanPortAllowableTPID3 Integer32,
fsMIDot1qFutureVlanPortClearGarpStats TruthValue,
fsMIDot1qFutureVlanPortUnicastMacSecType INTEGER,
fsMIDot1qFutureVlanPortStVlanList OCTET STRING,
fsMIDot1qFutureVlanPortStUntaggedVlan Unsigned32,
fsMIDot1qFuturePortPacketReflectionStatus TruthValue
}
fsMIDot1qFutureVlanPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number of the port for which this entry applies."
::= { fsMIDot1qFutureVlanPortEntry 1 }
fsMIDot1qFutureVlanPortType OBJECT-TYPE
SYNTAX INTEGER {
accessPort (1),
trunkPort (2),
hybridPort (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the port is by default hybrid port.
When configured as access port, the port can accept and send
only untagged frames.
When configured as a trunk port, port is added as
member of all the existing Vlans and also for any new vlan
created.
When configured as hybrid port, the port can send or accept both
tagged and untagged frames."
DEFVAL { hybridPort }
::= { fsMIDot1qFutureVlanPortEntry 2 }
fsMIDot1qFutureVlanPortMacBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the Mac based Classification
on port. This can be independently set without
any dependency in available configuration of
fsMIDot1qFutureVlanMacBasedOnAllPorts "
::= { fsMIDot1qFutureVlanPortEntry 3 }
fsMIDot1qFutureVlanPortPortProtoBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the port and protocol
Classification on port. This can be independently set without
any dependency in available configuration of
fsMIDot1qFutureVlanPortProtoBasedOnAllPorts "
::= { fsMIDot1qFutureVlanPortEntry 4 }
fsMIDot1qFutureVlanFilteringUtilityCriteria OBJECT-TYPE
SYNTAX INTEGER {
default (1),
enhanced (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Based on this object, learning on a port is decided.
If default filtering utility Criteria is selected on a port, then
learning of source mac from a received packet on that port will be
done only if there is atleast on member port in that vlan.
If enhanced filtering utility criteria is selected on a port,then
learning of source mac from a received packet on that port will be
done if the following are satisfied:
- if at least one VLAN that uses the FID includes the reception
Port and at least one other Port with a Port State of Learning or
Forwarding in its member set, and:
o The operPointToPointMAC parameter is false for the reception Port; or
o Ingress to the VLAN is permitted through a third Port.
The third port can, but is not required to, be in the member set."
DEFVAL { default }
::= { fsMIDot1qFutureVlanPortEntry 5 }
fsMIDot1qFutureVlanPortProtected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Split Horizon property of the port. If set to true, frames that
are received on any other port, that has the same property set to true,
will not be forwarded on this port."
DEFVAL { false }
::= { fsMIDot1qFutureVlanPortEntry 6 }
fsMIDot1qFutureVlanPortSubnetBasedClassification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Object to expilicitly enable/disable the Subnet based Vlan Classification
on port. This can be independently set without any dependency in
available configuration of dot1qFutureVlanSubnetBasedOnAllPorts. This
object is not used in case of BCM chipsets."
::= { fsMIDot1qFutureVlanPortEntry 7 }
fsMIDot1qFutureVlanPortUnicastMacLearning OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Truth value indicating the unicast MAC learning enabled/disabled
status for this port.
When Unicast Mac Learning is disabled,
no unicast mac entry will be learnt on this port.
When Mac Learning is enabled, unicast mac entries will be learnt on this
port. Configuration of this object will not get affected by the value
configured for fsMIDot1qFutureVlanGlobalMacLearningStatus "
DEFVAL { enabled }
::= { fsMIDot1qFutureVlanPortEntry 8 }
fsMIDot1qFutureVlanPortGmrpJoinEmptyTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Join Empty packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 9 }
fsMIDot1qFutureVlanPortGmrpJoinEmptyRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Join Empty packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 10 }
fsMIDot1qFutureVlanPortGmrpJoinInTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Join In packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 11 }
fsMIDot1qFutureVlanPortGmrpJoinInRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Join In packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 12 }
fsMIDot1qFutureVlanPortGmrpLeaveInTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Leave In packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 13 }
fsMIDot1qFutureVlanPortGmrpLeaveInRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Leave In packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 14 }
fsMIDot1qFutureVlanPortGmrpLeaveEmptyTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Leave Empty packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 15 }
fsMIDot1qFutureVlanPortGmrpLeaveEmptyRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Leave Empty packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 16 }
fsMIDot1qFutureVlanPortGmrpEmptyTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Empty packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 17 }
fsMIDot1qFutureVlanPortGmrpEmptyRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Empty packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 18 }
fsMIDot1qFutureVlanPortGmrpLeaveAllTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Leave All packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 19 }
fsMIDot1qFutureVlanPortGmrpLeaveAllRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp Leave All packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 20 }
fsMIDot1qFutureVlanPortGmrpDiscardCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gmrp packets discarded in this port."
::= { fsMIDot1qFutureVlanPortEntry 21 }
fsMIDot1qFutureVlanPortGvrpJoinEmptyTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Join Empty packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 22 }
fsMIDot1qFutureVlanPortGvrpJoinEmptyRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Join Empty packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 23 }
fsMIDot1qFutureVlanPortGvrpJoinInTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Join In packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 24 }
fsMIDot1qFutureVlanPortGvrpJoinInRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Join In packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 25 }
fsMIDot1qFutureVlanPortGvrpLeaveInTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Leave In packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 26 }
fsMIDot1qFutureVlanPortGvrpLeaveInRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Leave In packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 27 }
fsMIDot1qFutureVlanPortGvrpLeaveEmptyTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Leave Empty packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 28 }
fsMIDot1qFutureVlanPortGvrpLeaveEmptyRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Leave Empty packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 29 }
fsMIDot1qFutureVlanPortGvrpEmptyTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Empty packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 30 }
fsMIDot1qFutureVlanPortGvrpEmptyRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Empty packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 31 }
fsMIDot1qFutureVlanPortGvrpLeaveAllTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Leave All packets transmitted by this port."
::= { fsMIDot1qFutureVlanPortEntry 32 }
fsMIDot1qFutureVlanPortGvrpLeaveAllRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp Leave All packets received on this port."
::= { fsMIDot1qFutureVlanPortEntry 33 }
fsMIDot1qFutureVlanPortGvrpDiscardCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of Gvrp packets discarded in this port."
::= { fsMIDot1qFutureVlanPortEntry 34 }
fsMIDot1qFutureVlanPortFdbFlush OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set as 'true', then all the dynamically
learnt MAC addresses on the specified interface are removed.
After flush this object is set to 'false'.
If port is non secure, its all dynamic MAC addresses
are cleared. If port is secure, its all secure MAC addresses
which have learned or configured are cleared."
DEFVAL { false }
::= { fsMIDot1qFutureVlanPortEntry 35 }
fsMIDot1qFutureVlanPortIngressEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" In Customer Bridge mode this object indicates the primary C-VLAN tag ether
type used for the packets received on this port. Packets received on a port
are considered tagged, when the packet ethertype matches with the port ether
type configured.Otherwise, they will be considered untagged.
By default, on all the ports, 0x8100 will be configured as the ether type.
In Provider-Egde Bridge Mode, this object indicates the primary S-VLAN
tag ether type used for the packets received on this port.Packets
received on a port are considered tagged, when the packet ethertype
matches with the port ether type configured. Otherwise, they will be
considered untagged.
By default, on all the ports, 0x88a8 will be configured as the ether type.
On Proprietary Provider Network Ports 0x8100 will be configured as
the ingress ethertype."
::= { fsMIDot1qFutureVlanPortEntry 36 }
fsMIDot1qFutureVlanPortEgressEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In Customer Bridge Mode, this object indicates the ether type of
the C-VLAN tag that has to be applied for all the outgoing packets on
this port. If a valid value is in this object, all the packets which
are outgoing on this port will contain the ether type as configured in
this object. By Default 0x8100 will be used for packets transmitted
with C-VLAN on the ports.
In Provider-Egde Bridge Mode, this object indicates the ether type of
the S-VLAN tag that has to be applied for all the outgoing packets on
this port. If a valid value is in this object, all the packets which
are outgoing on this port will contain the ether type as configured in
this object. By Default 0x88a8 will be used for packets transmitted
with S-VLAN on the ports.
On Proprietary Provider Network Ports and Customer Edge Ports, 0x8100
will be used as the ether type for the outgoing packets."
::= { fsMIDot1qFutureVlanPortEntry 37 }
fsMIDot1qFutureVlanPortEgressTPIDType OBJECT-TYPE
SYNTAX INTEGER {
portbased(1),
vlanbased(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the Egress TPID type for a Port.
If the value is portbased(1) the egress TPID of the packet
is selected from Egress Port Table.
When the value is vlanbased(2) the Egress TPID is selected from
Egress VLAN Table."
DEFVAL { portbased }
::= { fsMIDot1qFutureVlanPortEntry 38 }
fsMIDot1qFutureVlanPortAllowableTPID1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the secondary ether type that is allowable for a port.
The configurable values for this object are either 0x8100 or 0x88a8.
Setting this MIB object is applicable only for hardware.
When this object is set to zero, secondary ether type configurations will be
deleted from hardware."
DEFVAL { 0 }
::= { fsMIDot1qFutureVlanPortEntry 39 }
fsMIDot1qFutureVlanPortAllowableTPID2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the standard ether type that is allowable for a port.
The configurable value for this object is Q-in-Q EtherType [0x9100].
Setting this MIB object is applicable only for hardware.
When this object is set to zero, the additional standard ether type configurations
will be deleted from hardware."
DEFVAL { 0 }
::= { fsMIDot1qFutureVlanPortEntry 40 }
fsMIDot1qFutureVlanPortAllowableTPID3 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the additional user defined ether type that is allowable for a port.
The value for this object is set by the fsMIDot1qFutureVlanUserDefinedTPID MIB.
Setting this MIB object is applicable only for hardware.
When this object is set to zero, the additional user defined ether type configurations will
be deleted from hardware."
DEFVAL { 0 }
::= { fsMIDot1qFutureVlanPortEntry 41 }
fsMIDot1qFutureVlanPortClearGarpStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting a value of 'true' in this object, resets all GVRP & GMRP
statistics counter values to zero. After resetting the statistics
counter values, the value of this object automatically switches back
to 'false'.
Setting a value of 'false' to this object has no effect.
This object always returns 'false' on a read."
DEFVAL { false }
::= { fsMIDot1qFutureVlanPortEntry 42 }
fsMIDot1qFutureVlanPortUnicastMacSecType OBJECT-TYPE
SYNTAX INTEGER {
sav(1),
shv(2),
off(3),
sdv(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the MA Table Address Type for this port
sav - security is sav, strict is FALSE
Only unknown MAC is treated as violation on all security configured ports.
shv - security is shv, strict is TRUE
Configured MAC alone is treated as non violation in all security configured ports.
sdv - security is sdv, strict is TRUE
Configured MAC alone is treated as non violation in all security configured ports.
Ports will be disabled.
off - disable security."
DEFVAL { 3 }
::= { fsMIDot1qFutureVlanPortEntry 43 }
fsMIDot1qFutureVlanPortStVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the list of VLANs in which this egress port
is added as static member.
The first octet corresponds to VLANs with VlanId values
1 through 8; the second octet corresponds to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VLAN ID in that octet.
The least significant bit represents the highest VLAN ID.
The same object is used to set / reset the port membership
to the VLAN list.
The dynamically learnt VLAN membership for this port will not be
displayed in this object. "
::= { fsMIDot1qFutureVlanPortEntry 44 }
fsMIDot1qFutureVlanPortStUntaggedVlan OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the VLAN in which this egress port
is added as untagged member port.
The same object is used to set / reset the port membership
to the untagged VLAN.
The untagged VLAN member should be subset of the VLAN List.
This object is set to zero when untagged vlan will be deleted
from the interface."
::= { fsMIDot1qFutureVlanPortEntry 45 }
fsMIDot1qFuturePortPacketReflectionStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port Packet Reflection feature allows switching of packets received on
an ingress port back on the same port on which packet was received,
if the MAC Destination Address is on the same port. The default behavior
of the switch is not to switch packets back on the same ingress port."
DEFVAL {false}
::= { fsMIDot1qFutureVlanPortEntry 46 }
-- -------------------------------------------------------------------------
-- Future Vlan Mac Map Table
-- -------------------------------------------------------------------------
fsMIDot1qFutureVlanPortMacMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanPortMacMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information on Vlan-MAC address
mapping. This table maintains context ID as one more
index to support Multiple Instances."
::= { fsMIDot1qFutureVlan 4 }
fsMIDot1qFutureVlanPortMacMapEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanPortMacMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-MAC address mapping."
INDEX { fsMIDot1qFutureVlanPort,
fsMIDot1qFutureVlanPortMacMapAddr }
::= { fsMIDot1qFutureVlanPortMacMapTable 1 }
FsMIDot1qFutureVlanPortMacMapEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanPortMacMapAddr MacAddress,
fsMIDot1qFutureVlanPortMacMapVid VlanId,
fsMIDot1qFutureVlanPortMacMapName DisplayString,
fsMIDot1qFutureVlanPortMacMapMcastBcastOption INTEGER,
fsMIDot1qFutureVlanPortMacMapRowStatus RowStatus
}
fsMIDot1qFutureVlanPortMacMapAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mac address for which the Vlan mapping is present in the entry."
::= { fsMIDot1qFutureVlanPortMacMapEntry 1 }
fsMIDot1qFutureVlanPortMacMapVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the mac address of this entry is mapped to."
::= { fsMIDot1qFutureVlanPortMacMapEntry 2 }
fsMIDot1qFutureVlanPortMacMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name given to the mac-vlan entry."
::= { fsMIDot1qFutureVlanPortMacMapEntry 3 }
fsMIDot1qFutureVlanPortMacMapMcastBcastOption OBJECT-TYPE
SYNTAX INTEGER { allow(1), supress(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configurable option for discarding/allowing Multicast/Broadcast Untagged
frames. The value allow (1) indicates that Multicast/Broadcast frames
with source Mac address as in the Mac Vlan entry will be dropped if mac
based vlan is enabled on that port.The value suppress (2) indicates that
Multicast/Broadcast frames with source Mac address as in the Mac Vlan
entry will be processed if mac based vlan is enabled on that port"
DEFVAL { allow }
::= { fsMIDot1qFutureVlanPortMacMapEntry 4 }
fsMIDot1qFutureVlanPortMacMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { fsMIDot1qFutureVlanPortMacMapEntry 5 }
-- -------------------------------------------------------------------------
-- Future Vlan Vlan-Fid Map Table
-- -------------------------------------------------------------------------
fsMIDot1qFutureVlanFidMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanFidMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the Filtering database
identifier (FID) used by vlan's to make forwarding decisions. Vlan's
can be mapped to use the same FID to share filtering information among
them. This will cause the mapped vlan's to operate in shared vlan
learning (SVL) mode. Vlan's mapped to a unique FID will operate in
independent vlan learning mode (IVL). A SET operation on this table is
allowed only when fsMIDot1qFutureVlanLearningMode is hybrid. By
default all vlan's will be mapped to the FID equal to their vlan id
when fsMIDot1qFutureVlanHybridTypeDefault is IVL. If the value of
fsMIDot1qFutureVlanHybridTypeDefault is SVL all vlan's are mapped to
filtering database id 1. This table maintains context ID as one more
index to support Multiple Instances."
::= { fsMIDot1qFutureVlan 5 }
fsMIDot1qFutureVlanFidMapEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanFidMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry mapping VlanId to Filtering database id."
INDEX { fsMIDot1qFutureVlanContextId, fsMIDot1qFutureVlanIndex }
::= { fsMIDot1qFutureVlanFidMapTable 1 }
FsMIDot1qFutureVlanFidMapEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanIndex Unsigned32,
fsMIDot1qFutureVlanFid Unsigned32
}
fsMIDot1qFutureVlanIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID for which filtering database information is available."
::= { fsMIDot1qFutureVlanFidMapEntry 1 }
fsMIDot1qFutureVlanFid OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Filtering database id (FID) that will be used by the vlan."
::= { fsMIDot1qFutureVlanFidMapEntry 2 }
-- fsMIDot1qFutureVlanTunnelConfig group
fsMIDot1qFutureVlanTunnelConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanTunnelConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"List of per virtual context Vlan Tunnel config parameters."
::= { fsMIDot1qFutureVlanTunnelConfig 1 }
fsMIDot1qFutureVlanTunnelConfigEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanTunnelConfigEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Per virtual context Vlan Tunnel config parameters.
"
INDEX { fsMIDot1qFutureVlanContextId }
::= { fsMIDot1qFutureVlanTunnelConfigTable 1 }
FsMIDot1qFutureVlanTunnelConfigEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanBridgeMode
INTEGER,
fsMIDot1qFutureVlanTunnelBpduPri
Integer32
}
fsMIDot1qFutureVlanBridgeMode OBJECT-TYPE
SYNTAX INTEGER {
customerBridge (1),
providerBridge (2),
providerCoreBridge (3),
providerEdgeBridge (4),
invalidBridgeMode (5)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object indicates the Bridge mode of the switch.
Setting this to 'customerBridge' means that the switch will operate
as a 802.1Q VLAN Bridge.
Setting this to 'providerBridge' means that the Bridge will operate as
a normal Q-in-Q Bridge.
Setting this to 'providerCoreBridge' means that the switch will operate
as a 802.1ad compliant provider bridge with only S-VLAN component.
Setting this to 'providerEdgeBridge' means that the switch will operate
as a 802.1ad provider edge bridge with S-VLAN component and atleast
one C-VLAN component.
For changing the bridge mode, GARP and STP modules should be shutdown."
::= { fsMIDot1qFutureVlanTunnelConfigEntry 1 }
fsMIDot1qFutureVlanTunnelBpduPri OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the default User Priority for all the tunneled Layer 2
BPDU's received on tunnel ports."
DEFVAL { 7 }
::= { fsMIDot1qFutureVlanTunnelConfigEntry 2 }
-- -------------------------------------------------------------------------
-- Future Vlan Tunnel Table
-- -------------------------------------------------------------------------
fsMIDot1qFutureVlanTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanTunnelEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains information about the fsMIDot1q tunnel ports. A
walk on this table will show only those interfaces that are configured
for tunneling.
This table is supported only when the Bridge is configured in Provider
Bridge (Q-in-Q) mode.
For Provider Core or Edge bridges, the tunnel protocol configuration
objects are defined in fspb.mib."
::= { fsMIDot1qFutureVlanTunnelConfig 2 }
fsMIDot1qFutureVlanTunnelEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanTunnelEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry indicating the tunnel information of the port."
INDEX { fsMIDot1qFutureVlanPort }
::= { fsMIDot1qFutureVlanTunnelTable 1 }
FsMIDot1qFutureVlanTunnelEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanTunnelStatus EnabledStatus
}
fsMIDot1qFutureVlanTunnelStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates whether fsMIDot1qTunnelling is enabled or disabled on this
port. fsMIDot1qFutureVlanTunnelStatus can be set to `enabled`
only if the Bridge mode is set to be `Provider Bridge Mode` and
Future VLAN port type is set to 'accessPort'and GVRP,GMRP,STP Protocols
are disabled on this port. All tunnel ports should be set as
untagged members for the access VLAN's configured for that customer."
DEFVAL { disabled }
::= { fsMIDot1qFutureVlanTunnelEntry 1 }
-- -------------------------------------------------------------------------
-- Future Vlan Tunnel Protocol Table
-- -------------------------------------------------------------------------
fsMIDot1qFutureVlanTunnelProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains information/statistics about the customer STP
BPDU's being tunneled inside the service provider network. A walk on
this table will show only those interfaces in which tunneling of STP
BPDU's is enabled.
This table is supported only when the Bridge is configured in Provider
Bridge (Q-in-Q) mode.
For Provider Core or Edge bridges, the tunnel protocol configuration
objects are defined in fspb.mib."
::= { fsMIDot1qFutureVlanTunnelConfig 3 }
fsMIDot1qFutureVlanTunnelProtocolEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanTunnelProtocolEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Entry indicating the tunneling of STP BPDU's on this port."
INDEX { fsMIDot1qFutureVlanPort }
::= { fsMIDot1qFutureVlanTunnelProtocolTable 1 }
FsMIDot1qFutureVlanTunnelProtocolEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanTunnelStpPDUs EnabledStatus,
fsMIDot1qFutureVlanTunnelStpPDUsRecvd Counter32,
fsMIDot1qFutureVlanTunnelStpPDUsSent Counter32,
fsMIDot1qFutureVlanTunnelGvrpPDUs EnabledStatus,
fsMIDot1qFutureVlanTunnelGvrpPDUsRecvd Counter32,
fsMIDot1qFutureVlanTunnelGvrpPDUsSent Counter32,
fsMIDot1qFutureVlanTunnelIgmpPkts EnabledStatus,
fsMIDot1qFutureVlanTunnelIgmpPktsRecvd Counter32,
fsMIDot1qFutureVlanTunnelIgmpPktsSent Counter32
}
fsMIDot1qFutureVlanTunnelStpPDUs OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates whether tunneling of STP BPDUs is enabled or not."
DEFVAL { disabled }
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 1 }
fsMIDot1qFutureVlanTunnelStpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled ingress STP PDU's."
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 2 }
fsMIDot1qFutureVlanTunnelStpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled egress STP PDU's."
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 3 }
fsMIDot1qFutureVlanTunnelGvrpPDUs OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates whether tunneling of GVRP BPDUs is enabled or not."
DEFVAL { enabled }
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 4 }
fsMIDot1qFutureVlanTunnelGvrpPDUsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled ingress GVRP PDU's."
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 5 }
fsMIDot1qFutureVlanTunnelGvrpPDUsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled egress GVRP PDU's."
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 6 }
fsMIDot1qFutureVlanTunnelIgmpPkts OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates whether tunneling of IGMP Packets is enabled or not."
DEFVAL { enabled }
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 7 }
fsMIDot1qFutureVlanTunnelIgmpPktsRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled ingress IGMP Packets."
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 8 }
fsMIDot1qFutureVlanTunnelIgmpPktsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of tunneled egress IGMP Packets."
::= { fsMIDot1qFutureVlanTunnelProtocolEntry 9 }
fsMIDot1qFutureVlanCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN."
::= { fsMIDot1qFutureVlan 6 }
fsMIDot1qFutureVlanCounterEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry contains the VLAN statistics"
INDEX { fsMIDot1qFutureVlanContextId, fsMIDot1qFutureVlanIndex }
::= { fsMIDot1qFutureVlanCounterTable 1 }
FsMIDot1qFutureVlanCounterEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanCounterRxUcast Counter32,
fsMIDot1qFutureVlanCounterRxMcastBcast Counter32,
fsMIDot1qFutureVlanCounterTxUnknUcast Counter32,
fsMIDot1qFutureVlanCounterTxUcast Counter32,
fsMIDot1qFutureVlanCounterTxBcast Counter32,
fsMIDot1qFutureVlanCounterRxFrames Counter32,
fsMIDot1qFutureVlanCounterRxBytes Counter32,
fsMIDot1qFutureVlanCounterTxFrames Counter32,
fsMIDot1qFutureVlanCounterTxBytes Counter32,
fsMIDot1qFutureVlanCounterDiscardFrames Counter32,
fsMIDot1qFutureVlanCounterDiscardBytes Counter32,
fsMIDot1qFutureVlanCounterStatus EnabledStatus
}
fsMIDot1qFutureVlanCounterRxUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of unicast packets received in this VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 1 }
fsMIDot1qFutureVlanCounterRxMcastBcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of multicast/broadcast packets received in this VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 2 }
fsMIDot1qFutureVlanCounterTxUnknUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of unknown unicast packets flooded in this VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 3 }
fsMIDot1qFutureVlanCounterTxUcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of known unicast packets forwarded in this VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 4 }
fsMIDot1qFutureVlanCounterTxBcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of broadcast packets forwarded in this VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 5 }
fsMIDot1qFutureVlanCounterRxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object displays the total number of unicast, multicast and broadcast packets received
in the VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 6 }
fsMIDot1qFutureVlanCounterRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object displays the total number of unicast, multicast and broadcast bytes received
in the VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 7 }
fsMIDot1qFutureVlanCounterTxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the total number of unicast, multicast and broadcast packets transmitted
by the VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 8 }
fsMIDot1qFutureVlanCounterTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the total number of unicast, multicast and broadcast bytes transmitted
by the VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 9 }
fsMIDot1qFutureVlanCounterDiscardFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object displays the number of packets dropped by the VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 10 }
fsMIDot1qFutureVlanCounterDiscardBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object displays the number of bytes dropped by the VLAN."
::= { fsMIDot1qFutureVlanCounterEntry 11 }
fsMIDot1qFutureVlanCounterStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Truth value indicating the statistics collection is enabled/disabled
for this vlan.
When statistics collection is set to disabled, Vlan stops collecting
statistics on this specific vlan.
When statistics collection is set to enabled, Vlan start collecting
statistics on this specific vlan"
DEFVAL { disabled }
::= {fsMIDot1qFutureVlanCounterEntry 12 }
fsMIDot1qFutureVlanUnicastMacControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanUnicastMacControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per VLAN Unicast MAC address control information.
The control information includes the status of unicast MAC address
learning as well as restricting the number of unique entries learnt to
a specified limit for the specified VLAN. The control set for the VLAN
is applicable only for the virtual context identified by the virtual
context identifier in this entry."
::= { fsMIDot1qFutureVlan 7 }
fsMIDot1qFutureVlanUnicastMacControlEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanUnicastMacControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling the number of distinct unicast MAC addresses
that can be learnt in a VLAN for a virtual context depending on whether
learning is enabled or disabled for the VLAN. The virtual
context is identified by an unique virtual context identifier."
INDEX { fsMIDot1qFutureVlanContextId, fsMIDot1qFutureVlanIndex }
::= { fsMIDot1qFutureVlanUnicastMacControlTable 1 }
FsMIDot1qFutureVlanUnicastMacControlEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanUnicastMacLimit Unsigned32,
fsMIDot1qFutureVlanAdminMacLearningStatus MacLearningStatus,
fsMIDot1qFutureVlanOperMacLearningStatus EnabledStatus
}
fsMIDot1qFutureVlanUnicastMacLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Limiting value on the number of distinct unicast MAC addresses
learned in the VLAN in this specified virtual context.
The lower limit and upper limit value that can be SET for this object
is determined by the underlying hardware.
If the unicast MAC learning limit is set as 'zero', then unicast
MAC learning status will be disabled for that particular VLAN.
Configuring Mac learning limit as 'non zero', when Mac learning status is
'disable' will not have any impact."
::= { fsMIDot1qFutureVlanUnicastMacControlEntry 1 }
fsMIDot1qFutureVlanAdminMacLearningStatus OBJECT-TYPE
SYNTAX MacLearningStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Truth value used to configure the unicast MAC learning Admin status
for the VLAN in this specified virtual context to either be enabled (1)
or disabled (2) or default (3), Configuring this object to default
behaviour is governed by value configured for dot1qFutureVlanGlobalMacLearningStatus."
DEFVAL { default }
::= { fsMIDot1qFutureVlanUnicastMacControlEntry 2 }
fsMIDot1qFutureVlanOperMacLearningStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Truth value indicating the unicast MAC learning enabled/disabled
Operational status for the VLAN in this specified virtual context.
If the VLAN is a Point-point service, then the Mac Learning Status
for this VLAN will always be disabled. If the VLAN is a Multipoint
service, then the Mac Learning status for this VLAN will take value
from Admin Mac Learning status."
::= { fsMIDot1qFutureVlanUnicastMacControlEntry 3 }
fsMIDot1qFutureGarpGlobalTrace OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the global trace in GARP."
::= { fsMIDot1qFutureVlan 8 }
-- -------------------------------------------------------------
-- fsDot1qTpFdbTable
-- -------------------------------------------------------------
fsMIDot1qFutureVlanTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame. This table maintains context ID
as one more index to support Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7"
::= { fsMIDot1qFutureVlan 9 }
fsMIDot1qFutureVlanTpFdbEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information."
AUGMENTS { fsDot1qTpFdbEntry }
::= { fsMIDot1qFutureVlanTpFdbTable 1 }
FsMIDot1qFutureVlanTpFdbEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanOldTpFdbPort
Integer32,
fsMIDot1qFutureConnectionIdentifier
MacAddress
}
fsMIDot1qFutureVlanOldTpFdbPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is useful for generating the source relearning trap.
When a get is performed on this object, it returns the value of
Zero(0), so that ISS walk doesn't break. It indicates the port
through which the mac-address was learnt previously, while generating
the source relearning trap."
::= { fsMIDot1qFutureVlanTpFdbEntry 1 }
fsMIDot1qFutureConnectionIdentifier OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is to associate the backbone MAC address of the peer
backbone edge brige with customer Mac addresses that can be reached
through the peer backbone edge bridge."
::= { fsMIDot1qFutureVlanTpFdbEntry 2 }
fsMIDot1qFutureVlanWildCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanWildCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Wild card vlan (Id : 0xFFF) static filtering information
will be used for all Vlans for which there is no specific
Static filtering exists in dot1qStaticUnicastTable or
dot1qStaticMulticastTable."
::= { fsMIDot1qFutureVlan 10 }
fsMIDot1qFutureVlanWildCardEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanWildCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WildCard vlan filtering Information configured into device by
management to which frames received from any port and for any
vlan containing this wild card mac address as destination address
and for which there is no static filtering information are allowed
to be forwarded."
INDEX { fsMIDot1qFutureVlanContextId,
fsMIDot1qFutureVlanWildCardMacAddress
}
::= { fsMIDot1qFutureVlanWildCardTable 1 }
FsMIDot1qFutureVlanWildCardEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanWildCardMacAddress
MacAddress,
fsMIDot1qFutureVlanWildCardRowStatus
RowStatus
}
fsMIDot1qFutureVlanWildCardMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination MAC address in a frame to which this entry's
filtering information applies. This object must take the
value of a Unicast, Multicast or Broadcast address."
::= { fsMIDot1qFutureVlanWildCardEntry 1 }
fsMIDot1qFutureVlanWildCardRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { fsMIDot1qFutureVlanWildCardEntry 2 }
fsMIDot1qFutureVlanWildCardPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanWildCardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table containing ports to which frames received from a specific
port and destined for fsMIDot1qFutureVlanWildCardMacAddress must be
forwarded, if there is no specific static filtering entry exist
for this MAC."
::= { fsMIDot1qFutureVlan 11 }
fsMIDot1qFutureVlanWildCardPortEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanWildCardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WildCard vlan filtering Information configured into device by
management specifying set of ports to which frames received
from any port and for any vlan containing
fsMIDot1qFutureVlanWildCardMacAddress mac address as destination
address and for which there is no static filtering information
are allowed to be forwarded."
INDEX { fsMIDot1qFutureVlanContextId,
fsMIDot1qFutureVlanWildCardMacAddress,
fsDot1qTpPort }
::= { fsMIDot1qFutureVlanWildCardPortTable 1 }
FsMIDot1qFutureVlanWildCardPortEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanIsWildCardEgressPort
TruthValue
}
fsMIDot1qFutureVlanIsWildCardEgressPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the port is an egress port of wildcard entry."
::= { fsMIDot1qFutureVlanWildCardPortEntry 1 }
-- -------------------------------------------------------------
-- The Static (Destination-Address Filtering) Database
-- -------------------------------------------------------------
fsMIDot1qFutureStaticUnicastExtnTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureStaticUnicastExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only. This table maintains context ID as
one more index to support Multiple Instances."
REFERENCE
"IEEE 802.1Q/D11 Section 12.7.7,
ISO/IEC 15802-3 Section 7.9.1"
::= { fsMIDot1qFutureVlan 12 }
fsMIDot1qFutureStaticUnicastExtnEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureStaticUnicastExtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded."
AUGMENTS { fsDot1qStaticUnicastEntry }
::= { fsMIDot1qFutureStaticUnicastExtnTable 1 }
FsMIDot1qFutureStaticUnicastExtnEntry ::=
SEQUENCE {
fsMIDot1qFutureStaticConnectionIdentifier
MacAddress
}
fsMIDot1qFutureStaticConnectionIdentifier OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to associate the backbone MAC address of the
peer backbone edge bridge with customer Mac addresses that
can be reached through the peer backbone edge bridge."
::= { fsMIDot1qFutureStaticUnicastExtnEntry 1 }
-- -------------------------------------------------------------------------
-- Future Vlan Subnet Map Table
-- -------------------------------------------------------------------------
fsMIDot1qFutureVlanPortSubnetMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanPortSubnetMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
This table maintains context ID as one more index to support
Multiple Instances. In case of BCM, the dot1qFutureVlanPort index
should always be 0 since BCM supports Subnet based VLAN
globally (not on per port)"
::= { fsMIDot1qFutureVlan 13 }
fsMIDot1qFutureVlanPortSubnetMapEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanPortSubnetMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-Subnet address mapping."
INDEX { fsMIDot1qFutureVlanPort, fsMIDot1qFutureVlanPortSubnetMapAddr }
::= { fsMIDot1qFutureVlanPortSubnetMapTable 1 }
FsMIDot1qFutureVlanPortSubnetMapEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanPortSubnetMapAddr IpAddress,
fsMIDot1qFutureVlanPortSubnetMapVid VlanId,
fsMIDot1qFutureVlanPortSubnetMapARPOption INTEGER,
fsMIDot1qFutureVlanPortSubnetMapRowStatus RowStatus
}
fsMIDot1qFutureVlanPortSubnetMapAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP-Subnet address for which the Vlan mapping is present
in the entry."
::= { fsMIDot1qFutureVlanPortSubnetMapEntry 1 }
fsMIDot1qFutureVlanPortSubnetMapVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the source IP-Subnet address of this entry is mapped to."
::= { fsMIDot1qFutureVlanPortSubnetMapEntry 2 }
fsMIDot1qFutureVlanPortSubnetMapARPOption OBJECT-TYPE
SYNTAX INTEGER { allow(1), suppress(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configurable option for discarding/allowing ARP Untagged frames on
the vlan. The value allow (1) indicates that ARP frames with source
IP-subnet address matching the dot1qFutureVlanPortSubnetMapEntry
will be classified to vlan based on dot1qFutureVlanPortSubnetMapEntry.
The value suppress (2) indicates that ARP frames with source IP-Subnet
address matching the dot1qFutureVlanPortSubnetMapEntry will not be
classified to vlan based on dot1qFutureVlanPortSubnetMapEntry. The
VLAN classification will be based on next subsequent classification
mechanism."
DEFVAL { allow }
::= { fsMIDot1qFutureVlanPortSubnetMapEntry 3 }
fsMIDot1qFutureVlanPortSubnetMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { fsMIDot1qFutureVlanPortSubnetMapEntry 4 }
fsMIDot1qFutureVlanSwStatsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to 'true', statistics collection will be done and stored in
software. This object can be set to 'true' only if the data switching
is done by software.
If set to 'false', the statistics collection will be done by the
hardware and will not be stored in software.
If data switching is done by software, then the default value of this
object will be 'true'. Otherwise, the default value will be 'false'.
- It is recommended to configure this object before doing any port
to virtual context mapping in the system."
::= { fsMIDot1qFutureVlan 14 }
-- ----------------------------------------------------------------------------
-- Future Vlan Extension Table
-- ----------------------------------------------------------------------------
fsMIDot1qFutureStVlanExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureStVlanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An extension to fsDot1qVlanStaticTable VLAN table."
::= { fsMIDot1qFutureVlan 15 }
fsMIDot1qFutureStVlanExtEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureStVlanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies the Vlan configuration done for
a given Vlan."
AUGMENTS { fsDot1qVlanStaticEntry }
::= { fsMIDot1qFutureStVlanExtTable 1 }
FsMIDot1qFutureStVlanExtEntry ::=
SEQUENCE {
fsMIDot1qFutureStVlanType INTEGER,
fsMIDot1qFutureStVlanVid VlanIdOrNone,
fsMIDot1qFutureStVlanFdbFlush TruthValue,
fsMIDot1qFutureStVlanEgressEthertype Integer32
}
fsMIDot1qFutureStVlanType OBJECT-TYPE
SYNTAX INTEGER {
normal (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the VLAN type of the static VLAN.
This object is being retained for backward compatibility of OID's
of the remaining objects in this table."
DEFVAL { normal }
::= { fsMIDot1qFutureStVlanExtEntry 1 }
fsMIDot1qFutureStVlanVid OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is being retained for backward compatibility of OID's of the
remaining objects in this table. "
::= { fsMIDot1qFutureStVlanExtEntry 2 }
fsMIDot1qFutureStVlanFdbFlush OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set as 'true', then all the dynamically
learnt MAC addresses in this Vlan are removed.After flush
this object is set to 'false'"
DEFVAL {false}
::= { fsMIDot1qFutureStVlanExtEntry 3 }
fsMIDot1qFutureStVlanEgressEthertype OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets the value for the Egress Ether type of a packet.
The value set for this object is applicable for a port present in
this vlan only when the value of fsMIDot1qFutureVlanPortEgressTPIDType
is set to vlanbased(2) for a egress port.
The configurable values are C-TAG, S-TAG ,Q-IN-Q and Userdefined
TPID defined by object fsMIDot1qFutureVlanUserDefinedTPID.
For a customer bridge the default value is C-VLAN tag, and for a
Provider-edge bridge the default is S-VLAN tag."
DEFVAL { 33024 }
::= { fsMIDot1qFutureStVlanExtEntry 4}
--table ends
fsMIDot1qVlanTraps OBJECT IDENTIFIER ::= { fsMIDot1qFutureVlanTraps 0 }
fsMIDot1qFutureMacThresholdTrap NOTIFICATION-TYPE
OBJECTS {
fsMIDot1qFutureVlanContextName,
fsMIDot1qFutureVlanIndex,
fsMIDot1qFutureVlanUnicastMacLimit
}
STATUS current
DESCRIPTION
"This trap is generated when the unicast mac limit threshold is
exceeded for a particular VLAN in a virtual context.The generated
trap will carry information regarding the Virtual context Id,
the Vlan Id whose Mac address limit has exceeded and the Mac
address threshold that was configured for this VLAN."
::= { fsMIDot1qVlanTraps 1 }
fsMIDot1qFutureSrcRelearnTrap NOTIFICATION-TYPE
OBJECTS {
fsMIDot1qFutureVlanContextName,
fsMIDot1qFutureVlanFid,
fsDot1qTpFdbPort,
fsMIDot1qFutureVlanOldTpFdbPort
}
STATUS current
DESCRIPTION
"This trap is generated whenever Source relearning happens in a VLAN.
The generated trap will contain information about the VLAN for which
the Source relearning happened, MAC Address and port number through
which this MAC address has been learnt now."
::= { fsMIDot1qVlanTraps 2 }
fsMIDot1qFutureSwitchMacLimitTrap NOTIFICATION-TYPE
OBJECTS {
fsMIDot1qFutureVlanContextName,
fsMIDot1qFutureUnicastMacLearningLimit
}
STATUS current
DESCRIPTION
"This trap is generated when the unicast mac limit threshold is
exceeded for a virtual context.The generated trap will carry
information regarding the Virtual context Id, and the mac
address threshold that was configured for this virtual context."
::= { fsMIDot1qVlanTraps 3 }
-- ----------------------------------------------------------------------------
-- Vlan Subnet Extension Table
-- ----------------------------------------------------------------------------
fsMIDot1qFutureVlanPortSubnetMapExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanPortSubnetMapExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping."
::= { fsMIDot1qFutureVlan 16 }
fsMIDot1qFutureVlanPortSubnetMapExtEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanPortSubnetMapExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry that contains Vlan-Subnet address mapping."
INDEX { fsMIDot1qFutureVlanPort,
fsMIDot1qFutureVlanPortSubnetMapExtAddr,
fsMIDot1qFutureVlanPortSubnetMapExtMask }
::= { fsMIDot1qFutureVlanPortSubnetMapExtTable 1 }
FsMIDot1qFutureVlanPortSubnetMapExtEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanPortSubnetMapExtAddr IpAddress,
fsMIDot1qFutureVlanPortSubnetMapExtMask IpAddress,
fsMIDot1qFutureVlanPortSubnetMapExtVid VlanId,
fsMIDot1qFutureVlanPortSubnetMapExtARPOption INTEGER,
fsMIDot1qFutureVlanPortSubnetMapExtRowStatus RowStatus
}
fsMIDot1qFutureVlanPortSubnetMapExtAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Source IP address for which the Vlan mapping is present
in the entry."
::= { fsMIDot1qFutureVlanPortSubnetMapExtEntry 1 }
fsMIDot1qFutureVlanPortSubnetMapExtMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Subnet Mask for which the Vlan mapping is present
in the entry."
::= { fsMIDot1qFutureVlanPortSubnetMapExtEntry 2 }
fsMIDot1qFutureVlanPortSubnetMapExtVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Vlan to which the Source IP-Subnet address of this entry is mapped to."
::= { fsMIDot1qFutureVlanPortSubnetMapExtEntry 3 }
fsMIDot1qFutureVlanPortSubnetMapExtARPOption OBJECT-TYPE
SYNTAX INTEGER { allow(1), suppress(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configurable option for discarding/allowing ARP Untagged frames on
the vlan. The value allow (1) indicates that ARP frames with source
IP-subnet address matching the fsMIDot1qFutureVlanPortSubnetMapExtEntry will be classified to vlan based on
fsMIDot1qFutureVlanPortSubnetMapExtEntry.The value suppress (2)
indicates that ARP frames with source IP-Subnet address matching the
fsMIDot1qFutureVlanPortSubnetMapExtEntry will not be classified to vlan
based on fsMIDot1qFutureVlanPortSubnetMapExtEntry. The VLAN
classification will be based on next subsequent classification
mechanism."
DEFVAL { allow }
::= { fsMIDot1qFutureVlanPortSubnetMapExtEntry 4 }
fsMIDot1qFutureVlanPortSubnetMapExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of the entry."
::= { fsMIDot1qFutureVlanPortSubnetMapExtEntry 5 }
-- ----------------------------------------------------------------------------
-- Port Vlan Extension Table
-- ----------------------------------------------------------------------------
fsMIDot1qFuturePortVlanExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFuturePortVlanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An extension to fsDot1qVlanStaticPortConfigEntry VLAN table.
This table contains the FDB Flush related
configurations."
::= { fsMIDot1qFutureVlan 17 }
fsMIDot1qFuturePortVlanExtEntry OBJECT-TYPE
SYNTAX FsMIDot1qFuturePortVlanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry specifies the Vlan configuration done for
a given Vlan and Port."
AUGMENTS { fsDot1qVlanStaticPortConfigEntry }
::= { fsMIDot1qFuturePortVlanExtTable 1 }
FsMIDot1qFuturePortVlanExtEntry ::=
SEQUENCE {
fsMIDot1qFuturePortVlanFdbFlush TruthValue
}
fsMIDot1qFuturePortVlanFdbFlush OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to 'true', then all the dynamically
learnt MAC addresses on the specified interface and vlan
are removed.After flush this object is set to 'false'"
DEFVAL {false}
::= { fsMIDot1qFuturePortVlanExtEntry 1 }
-- ----------------------------------------------------------------------------
-- Service level loopback Table
-- ----------------------------------------------------------------------------
fsMIDot1qFutureVlanLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIDot1qFutureVlanLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the Loopback Status for all VLANs."
::= { fsMIDot1qFutureVlan 18 }
fsMIDot1qFutureVlanLoopbackEntry OBJECT-TYPE
SYNTAX FsMIDot1qFutureVlanLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains the VLAN loopback Status."
INDEX { fsMIDot1qFutureVlanContextId, fsMIDot1qFutureVlanIndex }
::= { fsMIDot1qFutureVlanLoopbackTable 1 }
FsMIDot1qFutureVlanLoopbackEntry ::=
SEQUENCE {
fsMIDot1qFutureVlanLoopbackStatus EnabledStatus
}
fsMIDot1qFutureVlanLoopbackStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the loopback status for the vlan.
When Loopback is enabled, all data packets received
in the vlan will be sent back in the same port from which the packets
are received."
DEFVAL { disabled }
::= { fsMIDot1qFutureVlanLoopbackEntry 1 }
END
View Git Blame Copy Permalink