1859 lines
67 KiB
Plaintext
1859 lines
67 KiB
Plaintext
-- Copyright (C) 2012 Aricent Group . All Rights Reserved
|
|
|
|
-- $Id: fsl2vpn.mib,v 1.7 2015/09/15 06:43:03 siva Exp $
|
|
|
|
Aricent-L2VPN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
NOTIFICATION-TYPE,MODULE-IDENTITY, OBJECT-TYPE,
|
|
Unsigned32, Counter32, enterprises, IpAddress
|
|
FROM SNMPv2-SMI -- RFC2578
|
|
|
|
DisplayString, TruthValue, RowStatus, StorageType,
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC -- RFC2579
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC3411
|
|
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB -- RFC4001
|
|
|
|
MplsLdpIdentifier
|
|
FROM MPLS-TC-STD-MIB -- RFC3811
|
|
|
|
PwIndexOrZeroType, PwIDType, PwGroupID,
|
|
PwOperStatusTC
|
|
FROM PW-TC-STD-MIB -- RFC5542
|
|
|
|
MplsLsrIdentifier
|
|
FROM MPLS-TC-STD-MIB -- RFC3811
|
|
|
|
pwIndex
|
|
FROM PW-STD-MIB;
|
|
|
|
fsL2VpnMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
|
CONTACT-INFO "support@aricent.com"
|
|
|
|
DESCRIPTION
|
|
"All rights reserved"
|
|
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION
|
|
"The Proprietary MIB is based on the MPLS draft
|
|
draft-ietf-l2vpn-vpls-mib-06.This mib will change when
|
|
the OID is located for this draft as standard mib.
|
|
Added objects for the management of PW Redundancy Group as per
|
|
draft-ietf-pwe3-redundancy-07, draft-ietf-pwe3-redundancy-bit-07 and
|
|
draft-ietf-pwe3-iccp-07."
|
|
|
|
::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 72 }
|
|
|
|
-- Vpls BGP Autodiscovery specific Textual Convention
|
|
|
|
VplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syntax for a route distinguisher. For a complete
|
|
definition of a route distinguisher, see [RFC4364].
|
|
For more details on use of a route distinguisher
|
|
for a VPLS service, see [RFC4761]"
|
|
REFERENCE
|
|
"[RFC4364]"
|
|
SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
VplsBgpRouteTarget ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syntax for a route target. For a complete
|
|
definition of a route target, see [RFC4364]."
|
|
REFERENCE
|
|
"[RFC4364]"
|
|
SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
VplsBgpRouteTargetType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to define the type of a route target usage.
|
|
Route targets can be specified to be imported,
|
|
exported, or both. For a complete definition of a
|
|
route target, see [RFC4364]."
|
|
REFERENCE
|
|
"[RFC4364]"
|
|
SYNTAX INTEGER { import(1),
|
|
export(2),
|
|
both(3) }
|
|
|
|
VPNIdOrZero ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention is an extension of the
|
|
VPNId textual convention that defines a non-zero-length
|
|
OCTET STRING to identify a physical entity. This extension
|
|
permits the additional value of a zero-length OCTET STRING.
|
|
The semantics of the value zero-length OCTET STRING are
|
|
object-specific and must therefore be defined
|
|
as part of the description of any object that uses this
|
|
syntax. Examples of usage of this extension are
|
|
situations where none or all VPN IDs need to be
|
|
referenced."
|
|
SYNTAX OCTET STRING (SIZE (0 | 7))
|
|
|
|
FsL2VpnPwStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of the PW and the interfaces affecting
|
|
this PW. If none of the first 5 bits are set, it indicates no faults
|
|
are reported."
|
|
SYNTAX BITS
|
|
{
|
|
pwNotForwarding (0),
|
|
servicePwRxFault (1),
|
|
servicePwTxFault (2),
|
|
psnPwRxFault (3),
|
|
psnPwTxFault (4),
|
|
pwForwardingStandby (5),
|
|
pwSwitchoverRequest (6)
|
|
}
|
|
|
|
-- Notifications
|
|
vplsNotifications OBJECT IDENTIFIER
|
|
::= { fsL2VpnMIB 0 }
|
|
-- Tables, Scalars
|
|
vplsObjects OBJECT IDENTIFIER
|
|
::= { fsL2VpnMIB 1 }
|
|
-- Conformance
|
|
vplsConformance OBJECT IDENTIFIER
|
|
::= { fsL2VpnMIB 2 }
|
|
|
|
pwRedundancyScalar OBJECT IDENTIFIER
|
|
::= { fsL2VpnMIB 3 }
|
|
|
|
pwRedundancyObjects OBJECT IDENTIFIER
|
|
::= { fsL2VpnMIB 4 }
|
|
|
|
fsL2VpnPwRedTraps OBJECT IDENTIFIER
|
|
::= { pwRedundancyObjects 0 }
|
|
|
|
fsL2VpnPwRedTestObjects OBJECT IDENTIFIER
|
|
::= { pwRedundancyObjects 5 }
|
|
|
|
-- PW Virtual Connection Table
|
|
|
|
vplsConfigIndexNext OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used
|
|
for vplsConfigIndex when creating entries in the
|
|
vplsConfigTable. The value 0 indicates that no
|
|
unassigned entries are available. To obtain the
|
|
value of vplsConfigIndex for a new entry in the
|
|
vplsConfigTable, the manager issues a management
|
|
protocol retrieval operation to obtain the current
|
|
value of vplsConfigIndex. After each retrieval
|
|
operation, the agent should modify the value to
|
|
reflect the next unassigned index. After a manager
|
|
retrieves a value the agent will determine through
|
|
its local policy when this index value will be made
|
|
available for reuse."
|
|
::= { vplsObjects 1 }
|
|
|
|
vplsConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VplsConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information for configuring
|
|
and monitoring Virtual Private Lan Services(VPLS).
|
|
"
|
|
::= { vplsObjects 2 }
|
|
|
|
vplsConfigEntry OBJECT-TYPE
|
|
SYNTAX VplsConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents a Virtual Private Lan
|
|
Service(VPLS) in a packet network. It is indexed by
|
|
vplsConfigIndex, which uniquely identifies a single VPLS.
|
|
|
|
A row is created by the operator or by the agent if a
|
|
VPLS service is created by non-SNMP application or
|
|
due to autodiscovery process.
|
|
|
|
All of the read-create objects values except
|
|
vplsConfigSignalingType can be changed when
|
|
vplsConfigRowStatus is in the active(1)
|
|
state. Changes for vplsConfigSignalingType are only allowed
|
|
when the vplsConfigRowStatus is in notInService(2) or
|
|
notReady(3) states.
|
|
"
|
|
INDEX { vplsConfigIndex }
|
|
::= { vplsConfigTable 1 }
|
|
|
|
VplsConfigEntry ::=
|
|
SEQUENCE {
|
|
vplsConfigIndex Unsigned32,
|
|
vplsConfigName SnmpAdminString,
|
|
vplsConfigDescr SnmpAdminString,
|
|
vplsConfigAdminStatus INTEGER,
|
|
vplsConfigMacLearning TruthValue,
|
|
vplsConfigDiscardUnknownDest TruthValue,
|
|
vplsConfigMacAging TruthValue,
|
|
vplsConfigFwdFullHighWatermark Unsigned32,
|
|
vplsConfigFwdFullLowWatermark Unsigned32,
|
|
vplsConfigRowStatus RowStatus,
|
|
vplsConfigMtu Unsigned32,
|
|
vplsConfigVpnId VPNIdOrZero,
|
|
vplsConfigStorageType StorageType,
|
|
vplsConfigSignalingType INTEGER
|
|
}
|
|
|
|
vplsConfigIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1.. 2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index for the conceptual row identifying
|
|
a VPLS service."
|
|
::= { vplsConfigEntry 1 }
|
|
|
|
vplsConfigName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual name of the VPLS.
|
|
If there is no local name, or this object is
|
|
otherwise not applicable, then this object MUST
|
|
contain a zero-length octet string."
|
|
DEFVAL { "" }
|
|
::= { vplsConfigEntry 2 }
|
|
|
|
vplsConfigDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing information about the
|
|
VPLS service. If there is no information for this VPLS
|
|
service, then this object MUST contain a zero-length
|
|
octet string."
|
|
DEFVAL { "" }
|
|
::= { vplsConfigEntry 3 }
|
|
|
|
vplsConfigAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired administrative state of the VPLS
|
|
service. If the administrative status of the
|
|
Vpls service is changed to enable then this
|
|
service is able to utilize the pseudo wire to
|
|
perform the tasks of a VPLS service.
|
|
The testing(3) state indicates that no operational
|
|
packets can be passed. "
|
|
DEFVAL { down }
|
|
::= { vplsConfigEntry 4 }
|
|
|
|
vplsConfigMacLearning OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if MAC Learning is enabled
|
|
in this service. If this object is true then Mac
|
|
Learning is enabled. If false, then Mac Learning is
|
|
disabled."
|
|
DEFVAL { true }
|
|
::= { vplsConfigEntry 6 }
|
|
|
|
vplsConfigDiscardUnknownDest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value of this object is 'true', then frames
|
|
received with an unknown destination MAC are discarded
|
|
in this VPLS. If 'false', then the packets are
|
|
processed."
|
|
DEFVAL { false }
|
|
::= { vplsConfigEntry 7 }
|
|
|
|
vplsConfigMacAging OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value of this object is 'true'
|
|
then the MAC ageing process is enabled in
|
|
this VPLS. If 'false', then the MAC ageing process
|
|
is disabled"
|
|
DEFVAL { true }
|
|
::= { vplsConfigEntry 8 }
|
|
|
|
vplsConfigFwdFullHighWatermark OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the utilization of the
|
|
forwarding database for this VPLS instance at
|
|
which the vplsFwdFullAlarmRaised notification
|
|
will be sent."
|
|
DEFVAL { 95 }
|
|
::= { vplsConfigEntry 10 }
|
|
|
|
vplsConfigFwdFullLowWatermark OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the utilization of the
|
|
forwarding database for this VPLS instance
|
|
at which the vplsFwdFullAlarmCleared
|
|
notification will be sent."
|
|
DEFVAL { 90 }
|
|
::= { vplsConfigEntry 11 }
|
|
|
|
vplsConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For creating, modifying, and deleting this row.
|
|
|
|
All other objects in this row must be set to valid
|
|
values before this object can be set to active(1).
|
|
|
|
None of the read-create objects in the
|
|
conceptual rows may be changed when this
|
|
object is in the active(1) state.
|
|
|
|
If this object is set to destroy(6) or deleted by the
|
|
agent, all associated entries in the vplsPWBindTable,
|
|
vplsBGPRteTargetTable and vplsBgpVETable shall be
|
|
deleted."
|
|
::= { vplsConfigEntry 12 }
|
|
|
|
vplsConfigMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32 (64..1518)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object specifies the MTU of this
|
|
vpls instance. This can be used to limit the MTU to a
|
|
value lower than the MTU supported by the associated
|
|
Pseudowires"
|
|
DEFVAL { 1518 }
|
|
::= { vplsConfigEntry 13 }
|
|
|
|
vplsConfigVpnId OBJECT-TYPE
|
|
SYNTAX VPNIdOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects indicates the IEEE 802-1990
|
|
VPN ID of the associated VPLS service."
|
|
-- Ed note: Should we import the VPNIdOrZero TC or
|
|
-- define a new TC?
|
|
::= { vplsConfigEntry 14 }
|
|
|
|
vplsConfigStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this row."
|
|
DEFVAL { volatile }
|
|
::= { vplsConfigEntry 15 }
|
|
|
|
vplsConfigSignalingType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ldp(1),
|
|
bgp(2),
|
|
none(3)
|
|
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Desired signaling type of the VPLS service.
|
|
|
|
If the value of this object is ldp(1), then a
|
|
corresponding entry in vplsLdpConfigTable is required.
|
|
|
|
If the value of this object is bgp(2), then a
|
|
corresponding entry in vplsBgpConfigTable is required.
|
|
|
|
If the value of this object is none(3), then it
|
|
indicates a static configuration of PW labels."
|
|
DEFVAL { none }
|
|
::= { vplsConfigEntry 16 }
|
|
|
|
-- VPLS Status table
|
|
|
|
vplsStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VplsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides information for monitoring
|
|
Virtual Private Lan Services(VPLS).
|
|
"
|
|
::= { vplsObjects 3 }
|
|
|
|
vplsStatusEntry OBJECT-TYPE
|
|
SYNTAX VplsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents a Virtual Private Lan
|
|
Service(VPLS) in a packet network. It is indexed by
|
|
vplsConfigIndex, which uniquely identifies a single VPLS.
|
|
|
|
A row in this table is automatically created by the agent
|
|
when a VPLS service is configured.
|
|
"
|
|
INDEX { vplsConfigIndex }
|
|
::= { vplsStatusTable 1 }
|
|
|
|
VplsStatusEntry ::=
|
|
SEQUENCE {
|
|
vplsStatusOperStatus INTEGER,
|
|
vplsStatusPeerCount Counter32
|
|
}
|
|
|
|
vplsStatusOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of this VPLS Service."
|
|
::= { vplsStatusEntry 1 }
|
|
|
|
vplsStatusPeerCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects specifies the number of peers
|
|
present in this vpls instance."
|
|
::= { vplsStatusEntry 2 }
|
|
|
|
|
|
-- VPLS PW Binding Table
|
|
|
|
vplsPwBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VplsPwBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides an association between a
|
|
VPLS service and the corresponding Pseudo
|
|
Wires. A service can have more than one Pseudo
|
|
Wire association. Pseudo Wires are defined in
|
|
the pwTable"
|
|
::= { vplsObjects 4 }
|
|
|
|
vplsPwBindEntry OBJECT-TYPE
|
|
SYNTAX VplsPwBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row represents an association between a
|
|
VPLS instance and a Pseudo Wires
|
|
defined in the pwTable. Each index is unique
|
|
in describing an entry in this table. However
|
|
both indexes are required to define the one
|
|
to many association of service to
|
|
pseudowire.
|
|
Entries in this table may be created or deleted
|
|
through SNMP, as side-effects of console or other
|
|
non-SNMP management commands, or upon learning via
|
|
autodiscovery.
|
|
|
|
It is optional for the agent to allow entries to be
|
|
created that point to non-existent entries in
|
|
vplsConfigTable."
|
|
|
|
INDEX { vplsConfigIndex, pwIndex }
|
|
::= { vplsPwBindTable 1 }
|
|
|
|
VplsPwBindEntry ::=
|
|
SEQUENCE {
|
|
vplsPwBindConfigType INTEGER,
|
|
vplsPwBindType INTEGER,
|
|
vplsPwBindRowStatus RowStatus,
|
|
vplsPwBindStorageType StorageType
|
|
}
|
|
|
|
vplsPwBindConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual (1),
|
|
autodiscovery (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates
|
|
whether the Pseudo Wire binding was created
|
|
manually or via autodiscovery.
|
|
|
|
The value of this object must be
|
|
specifed when the row is created and cannot
|
|
be changed while the row status is active(1)"
|
|
::= { vplsPwBindEntry 1 }
|
|
|
|
vplsPwBindType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mesh (1),
|
|
spoke (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates
|
|
whether the Pseudo Wire binding is of
|
|
type mesh or spoke.
|
|
|
|
The value of this object must be
|
|
specifed when the row is created and cannot
|
|
be changed while the row status is active(1)"
|
|
::= { vplsPwBindEntry 2 }
|
|
|
|
vplsPwBindRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For creating, modifying, and deleting this row.
|
|
|
|
All other objects in this row must be set to valid
|
|
values before this object can be set to active(1).
|
|
|
|
None of the read-create objects in the
|
|
conceptual rows may be changed when this
|
|
object is in the active(1) state.
|
|
|
|
If autodiscovered entries are deleted they would
|
|
likely re-appear in the next autodiscovery interval."
|
|
::= { vplsPwBindEntry 3 }
|
|
|
|
vplsPwBindStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this row."
|
|
DEFVAL { volatile }
|
|
::= { vplsPwBindEntry 4 }
|
|
|
|
-- vplsBgpADConfigTable
|
|
|
|
vplsBgpADConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VplsBgpADConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information for configuring
|
|
BGP Auto-discovery parameters for a given Vpls service.
|
|
"
|
|
::= { vplsObjects 5 }
|
|
|
|
vplsBgpADConfigEntry OBJECT-TYPE
|
|
SYNTAX VplsBgpADConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents BGP based autodiscovery
|
|
is in use for this instance of Vpls.
|
|
A row in this table is indexed by vplsConfigIndex, which
|
|
uniquely identifies a single VPLS.
|
|
|
|
Entries in this table may be created or deleted
|
|
through SNMP, as side-effects of console or other
|
|
non-SNMP management commands, or upon learning via
|
|
autodiscovery.
|
|
|
|
All of the read-create objects can be changed when
|
|
vplsBGPADConfigRowStatus is in active(1) state."
|
|
INDEX { vplsConfigIndex }
|
|
::= { vplsBgpADConfigTable 1 }
|
|
|
|
VplsBgpADConfigEntry ::=
|
|
SEQUENCE {
|
|
vplsBgpADConfigRouteDistinguisher VplsBgpRouteDistinguisher,
|
|
vplsBgpADConfigPrefix Unsigned32,
|
|
vplsBgpADConfigVplsId VplsBgpRouteDistinguisher,
|
|
vplsBgpADConfigRowStatus RowStatus,
|
|
vplsBgpADConfigStorageType StorageType
|
|
}
|
|
|
|
vplsBgpADConfigRouteDistinguisher OBJECT-TYPE
|
|
SYNTAX VplsBgpRouteDistinguisher
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The route distinguisher for this VPLS. See [RFC4364]
|
|
for a complete definition of a route distinguisher.
|
|
for more details on use of a route distinguisher
|
|
for a VPLS service, see [RFC4761].When not configured, the
|
|
value is derived from the lower 6 bytes of
|
|
vplsBgpADConfigVplsId.
|
|
"
|
|
::= { vplsBgpADConfigEntry 1 }
|
|
|
|
vplsBgpADConfigPrefix OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" In case of auto-discovery the default prefix advertised
|
|
is the ip address of the loopback. In case the user wants
|
|
to override the loopback address, vplsBgpADConfigPrefix
|
|
should be set. When this value if non-zero this value is
|
|
used along with vplsBgpADConfigRouteDistinguisher in the
|
|
NLRI, see [RFC6074]
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { vplsBgpADConfigEntry 2 }
|
|
|
|
vplsBgpADConfigVplsId OBJECT-TYPE
|
|
SYNTAX VplsBgpRouteDistinguisher
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" VplsId is a unique identifier for all VSIs belonging to
|
|
the same VPLS. It is advertised as an extended community
|
|
"
|
|
::= { vplsBgpADConfigEntry 3 }
|
|
|
|
vplsBgpADConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" For creating, modifying, and deleting this row.
|
|
|
|
All other objects in this row must be set to valid
|
|
values before this object can be set to active(1).
|
|
|
|
None of the read-create objects in the
|
|
conceptual rows may be changed when this
|
|
object is in the active(1) state.
|
|
"
|
|
::= { vplsBgpADConfigEntry 4 }
|
|
|
|
vplsBgpADConfigStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this row."
|
|
DEFVAL { nonVolatile }
|
|
::= { vplsBgpADConfigEntry 5 }
|
|
|
|
-- vplsBgpRteTargetTable
|
|
|
|
vplsBgpRteTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VplsBgpRteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This table specifies the list of Route Targets
|
|
imported or exported by BGP during auto-discovery of VPLS.
|
|
"
|
|
::= { vplsObjects 6 }
|
|
|
|
vplsBgpRteTargetEntry OBJECT-TYPE
|
|
SYNTAX VplsBgpRteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table specifies the value of the
|
|
Route Target being used by BGP. Depending on the value
|
|
of vplsBgpRteTargetType an RT might be exported or
|
|
imported or both. Every VPLS which
|
|
uses auto-discovery for finding peer nodes can import and
|
|
export multiple Route Targets. This representation allows
|
|
support for hierarchical VPLS.
|
|
|
|
Entries in this table may be created or deleted
|
|
through SNMP, as side-effects of console or other
|
|
non-SNMP management commands, or upon learning via
|
|
autodiscovery.
|
|
|
|
It is optional for the agent to allow entries to be
|
|
created that point to non-existent entries in
|
|
vplsConfigTable."
|
|
INDEX { vplsConfigIndex, vplsBgpRteTargetIndex }
|
|
::= { vplsBgpRteTargetTable 1 }
|
|
|
|
VplsBgpRteTargetEntry ::=
|
|
SEQUENCE {
|
|
vplsBgpRteTargetIndex Unsigned32,
|
|
vplsBgpRteTargetRTType VplsBgpRouteTargetType,
|
|
vplsBgpRteTargetRT VplsBgpRouteTarget,
|
|
vplsBgpRteTargetRTRowStatus RowStatus,
|
|
vplsBgpRteTargetStorageType StorageType
|
|
}
|
|
|
|
vplsBgpRteTargetIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index along with vplsConfigIndex,identifies one entry
|
|
in the vplsBgpRteTargetTable. By keeping vplsConfigIndex
|
|
constant and using new value of vplsBgpRteTargetIndex user
|
|
can configure multiple Route Targets for the same Vpls.
|
|
"
|
|
::= { vplsBgpRteTargetEntry 1 }
|
|
|
|
vplsBgpRteTargetRTType OBJECT-TYPE
|
|
SYNTAX VplsBgpRouteTargetType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Used to define the type of a route target usage.
|
|
Route targets can be specified to be imported,
|
|
exported, or both. For a complete definition of a
|
|
route target, see [RFC4364]."
|
|
::= { vplsBgpRteTargetEntry 2 }
|
|
|
|
vplsBgpRteTargetRT OBJECT-TYPE
|
|
SYNTAX VplsBgpRouteTarget
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The route target associated with the VPLS service.
|
|
For more details on use of route targets
|
|
for a VPLS service, see [RFC4761]"
|
|
|
|
::= { vplsBgpRteTargetEntry 3 }
|
|
|
|
vplsBgpRteTargetRTRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table.
|
|
|
|
All other objects in this row must be set to valid
|
|
values before this object can be set to active(1).
|
|
|
|
When a row in this table is in active(1) state, no
|
|
objects in that row can be modified.
|
|
|
|
If autodiscovered entries are deleted they would
|
|
likely re-appear in the next autodiscovery interval."
|
|
::= { vplsBgpRteTargetEntry 4 }
|
|
|
|
vplsBgpRteTargetStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this row."
|
|
DEFVAL { volatile }
|
|
::= { vplsBgpRteTargetEntry 5 }
|
|
|
|
vplsStatusNotifEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this object is set to true(1), then it enables
|
|
the emission of vplsStatusChanged
|
|
notification; otherwise this notification is not
|
|
emitted."
|
|
REFERENCE
|
|
"See also [RFC3413] for explanation that
|
|
notifications are under the ultimate control of the
|
|
MIB module in this document."
|
|
DEFVAL { false }
|
|
::= { vplsObjects 7 }
|
|
|
|
vplsNotificationMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum number of
|
|
notifications issued per second. If events occur
|
|
more rapidly, the implementation may simply fail to
|
|
emit these notifications during that period, or may
|
|
queue them until an appropriate time. A value of 0
|
|
means no throttling is applied and events may be
|
|
notified at the rate at which they occur."
|
|
DEFVAL { 0 }
|
|
::= { vplsObjects 8 }
|
|
|
|
-- VPLS Service Notifications
|
|
|
|
vplsStatusChanged NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vplsConfigVpnId,
|
|
vplsConfigAdminStatus,
|
|
vplsStatusOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vplsStatusChanged notification is generated
|
|
when there is a change in the administrative or
|
|
operating status of a VPLS service.
|
|
|
|
The object instances included in the notification are
|
|
the ones associated with the VPLS service whose
|
|
status has changed."
|
|
::= { vplsNotifications 1 }
|
|
|
|
vplsFwdFullAlarmRaised NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vplsConfigVpnId,
|
|
vplsConfigFwdFullHighWatermark,
|
|
vplsConfigFwdFullLowWatermark
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vplsFwdFullAlarmRaised notification is
|
|
generated when the utilization of the Forwarding
|
|
database is above the value specified by
|
|
vplsConfigFwdFullHighWatermark.
|
|
The object instances included in the notification are
|
|
the ones associated with the VPLS service which has
|
|
exceeded the threshold."
|
|
::= { vplsNotifications 2 }
|
|
|
|
vplsFwdFullAlarmCleared NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vplsConfigVpnId,
|
|
vplsConfigFwdFullHighWatermark,
|
|
vplsConfigFwdFullLowWatermark
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vplsFwdFullAlarmCleared notification is
|
|
generated when the utilization of the Forwarding
|
|
database is below the value specified by
|
|
vplsConfigFwdFullLowWatermark.
|
|
The object instances included in the notification are
|
|
the ones associated with the VPLS service which has
|
|
fallen below the threshold."
|
|
::= { vplsNotifications 3 }
|
|
|
|
-- Compliance requirement for read-only implementations.
|
|
|
|
vplsCompliances
|
|
OBJECT IDENTIFIER ::= { vplsConformance 1 }
|
|
|
|
vplsModuleFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance requirement for implementations that
|
|
provide full support for VPLS-GENERIC-DRAFT-01-MIB.
|
|
Such devices can then be monitored and configured using
|
|
this MIB module."
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS {
|
|
vplsGroup,
|
|
vplsPwBindGroup,
|
|
vplsNotificationGroup
|
|
}
|
|
|
|
::= { vplsCompliances 1 }
|
|
|
|
|
|
vplsModuleReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance requirement for implementations that only
|
|
provide read-only support for VPLS-GENERIC-DRAFT-01-MIB.
|
|
Such devices can then be monitored but cannot be
|
|
configured using this MIB modules."
|
|
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS {
|
|
vplsGroup,
|
|
vplsPwBindGroup,
|
|
vplsNotificationGroup
|
|
}
|
|
|
|
OBJECT vplsConfigName
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
|
|
OBJECT vplsConfigDescr
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsConfigAdminStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsConfigMacLearning
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsConfigDiscardUnknownDest
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsConfigMacAging
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsConfigFwdFullHighWatermark
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsConfigFwdFullLowWatermark
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsConfigRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsConfigMtu
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsPwBindConfigType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsPwBindType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT vplsPwBindRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
::= { vplsCompliances 2 }
|
|
|
|
-- Units of conformance.
|
|
|
|
vplsGroups
|
|
OBJECT IDENTIFIER ::= { vplsConformance 2 }
|
|
|
|
|
|
vplsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vplsConfigName,
|
|
vplsConfigDescr,
|
|
vplsConfigAdminStatus,
|
|
vplsConfigMacLearning,
|
|
vplsConfigDiscardUnknownDest,
|
|
vplsConfigMacAging,
|
|
vplsConfigVpnId,
|
|
vplsConfigFwdFullHighWatermark,
|
|
vplsConfigFwdFullLowWatermark,
|
|
vplsConfigRowStatus,
|
|
vplsConfigIndexNext,
|
|
vplsConfigMtu,
|
|
vplsConfigStorageType,
|
|
vplsConfigSignalingType,
|
|
vplsStatusOperStatus,
|
|
vplsStatusPeerCount,
|
|
vplsStatusNotifEnable,
|
|
vplsNotificationMaxRate
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects supporting
|
|
management of L2VPN VPLS services"
|
|
::= { vplsGroups 1 }
|
|
|
|
vplsPwBindGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vplsPwBindConfigType,
|
|
vplsPwBindType,
|
|
vplsPwBindRowStatus,
|
|
vplsPwBindStorageType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of objects supporting
|
|
management of
|
|
Pseudo Wire (PW) Binding to VPLS."
|
|
::= { vplsGroups 2 }
|
|
|
|
vplsNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
vplsStatusChanged,
|
|
vplsFwdFullAlarmRaised,
|
|
vplsFwdFullAlarmCleared
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group of notifications supporting
|
|
the Notifications generated for
|
|
VPLS Services"
|
|
::= { vplsGroups 3 }
|
|
--- End of vplsNotification Table
|
|
|
|
|
|
-- PW Redundancy parameters
|
|
|
|
fsL2VpnPwRedundancyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is for enabling or disabling the pseudowire redundancy feature.
|
|
User can disable the pseudowire redundancy if the Peer PE node does not
|
|
support pseudowire redundancy."
|
|
DEFVAL { enable }
|
|
::= { pwRedundancyScalar 1 }
|
|
|
|
fsL2VpnPwRedNegotiationTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAXIMUM permissible time allowed to negotiate the FORWARDING/
|
|
SWITCHOVER status with peer PEs. After expiry of this time operator
|
|
notification will be triggered."
|
|
DEFVAL { 60 }
|
|
::= { pwRedundancyScalar 2 }
|
|
|
|
fsL2VpnPwRedundancySyncFailNotifyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable notification for PW FORWARDING/SWITCHOVER status negotiation
|
|
failures."
|
|
DEFVAL { false }
|
|
::= { pwRedundancyScalar 3 }
|
|
|
|
fsL2VpnPwRedundancyPwStatusNotifyEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notify PW_STATUS change (AC_FAULT, PSN_FAULT, FORWARDING, SWITCHOVER)."
|
|
DEFVAL { false }
|
|
::= { pwRedundancyScalar 4 }
|
|
|
|
|
|
-- Redundancy Set is created here
|
|
|
|
fsL2VpnPwRedGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsL2VpnPwRedGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PW Redundancy Group table for pseudo-wire. Each entry in this
|
|
table corresponds to a configured Redundancy Group. This table
|
|
contains the group specific attributes. The entry in this table
|
|
are derived in reference from the (draft draft-ietf-pwe3-redundancy-07
|
|
& draft-ietf-pwe3-redundancy-bit-07)."
|
|
::= { pwRedundancyObjects 1 }
|
|
|
|
fsL2VpnPwRedGroupEntry OBJECT-TYPE
|
|
SYNTAX FsL2VpnPwRedGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The PW Redundancy Group table entry. This table allows the user to
|
|
configure the Redundancy Group related parameters. Once the redundancy
|
|
entries are created then the pseudo-wires can be associated to each
|
|
Group. The switching of data will be done within the pseudo-wires in a
|
|
Redundancy entry"
|
|
INDEX
|
|
{
|
|
fsL2VpnPwRedGroupIndex
|
|
}
|
|
::= { fsL2VpnPwRedGroupTable 1 }
|
|
|
|
FsL2VpnPwRedGroupEntry ::= SEQUENCE
|
|
{
|
|
fsL2VpnPwRedGroupIndex Unsigned32,
|
|
fsL2VpnPwRedGroupProtType INTEGER,
|
|
fsL2VpnPwRedGroupReversionType INTEGER,
|
|
fsL2VpnPwRedGroupContentionResolutionMethod INTEGER,
|
|
fsL2VpnPwRedGroupLockoutProtection INTEGER,
|
|
fsL2VpnPwRedGroupMasterSlaveMode INTEGER,
|
|
fsL2VpnPwRedGroupDualHomeApps BITS,
|
|
fsL2VpnPwRedGroupName DisplayString,
|
|
fsL2VpnPwRedGroupStatus BITS,
|
|
fsL2VpnPwRedGroupOperActivePw PwIndexOrZeroType,
|
|
fsL2VpnPwRedGroupWtrTimer Unsigned32,
|
|
fsL2VpnPwRedGroupAdminCmd INTEGER,
|
|
fsL2VpnPwRedGroupAdminActivePw PwIndexOrZeroType,
|
|
fsL2VpnPwRedGroupAdminCmdStatus INTEGER,
|
|
fsL2VpnPwRedGroupRowStatus RowStatus
|
|
}
|
|
|
|
fsL2VpnPwRedGroupIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique identifier for the pseudowire redundancy protection group."
|
|
::= { fsL2VpnPwRedGroupEntry 1 }
|
|
|
|
fsL2VpnPwRedGroupProtType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
onePlusOne (1),
|
|
oneIsToOne (2),
|
|
oneIsToN (3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to indicate the protection architecture type of the
|
|
redundancy group. Protection architecture types supported are give below:
|
|
|
|
- 'onePlusOneWithLdp(1),provides 1+1 support for the pseudowires.
|
|
currently this is not supported
|
|
- 'oneIsToOneWithLdp(2)', provides 1:1 support (i.e)the
|
|
selector bridging is established at the time of protection switching
|
|
based on signaling negotiation as per the Draft
|
|
'draft-ietf-pwe3-redundancy-07'
|
|
- 'oneIsToNWithLdp(3)',provides 1:n support (i.e) the selector bridging
|
|
is established at the time of protection switching from 'n'
|
|
available pseudowires"
|
|
DEFVAL { oneIsToOne }
|
|
::= { fsL2VpnPwRedGroupEntry 2 }
|
|
|
|
fsL2VpnPwRedGroupReversionType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
revertive (1),
|
|
nonRevertive (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to indicate the operation type/mode of the
|
|
protection group entry. If the value is set to 'revertive(1)', then
|
|
normal traffic will be shifted from the protection entity back to the
|
|
working entity upon recovery of the working entity from the fault. If
|
|
the value is set to 'nonRevertive(2)', then the normal traffic will not
|
|
be shifted from the protection entity back to the working entity even
|
|
after the recovery of the working entity from the fault."
|
|
DEFVAL { nonRevertive }
|
|
::= { fsL2VpnPwRedGroupEntry 3 }
|
|
|
|
fsL2VpnPwRedGroupContentionResolutionMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
independent (1),
|
|
masterslave (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to indicate the mode of operation of the
|
|
pseudo-wire group. If the mode is configured as independent then the PW
|
|
endpoint nodes independently select which PW they intend to make active
|
|
and which PWs they intend to make standby. If it is configured as
|
|
Master/Slave mode, Then the endpoint node of the redundant set of PWs
|
|
which is designated the Master is responsible for selecting which PW
|
|
both endpoints must use to forward user traffic."
|
|
DEFVAL { independent }
|
|
::= { fsL2VpnPwRedGroupEntry 4 }
|
|
|
|
fsL2VpnPwRedGroupLockoutProtection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled (0),
|
|
enabled (1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to indicate the operation type/mode of the
|
|
lockout protection group entry. If the value is set to 'enabled(1)', then
|
|
no switching shall occur in the event of a fault/ac failure or force switchover.
|
|
If the value is set to 'disabled(0)', then the normal switching shall occur in
|
|
case of AC failure,fault occurence of forced switchover"
|
|
DEFVAL { disabled }
|
|
::= { fsL2VpnPwRedGroupEntry 5 }
|
|
|
|
|
|
fsL2VpnPwRedGroupMasterSlaveMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
master (1),
|
|
slave (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is applicable only if the
|
|
fsL2VpnPwRedGroupContentionResolutionMethod is selected as 'masterSlave'.
|
|
Then the user can specify if this group is acting as Master or Slave.
|
|
When the Redundancy Group is configured as Master it has the choice to
|
|
select the forwarding state. i.e. the Active/Standby pseudo-wire. The
|
|
slave node is expected to follow the decision of the master"
|
|
DEFVAL { slave }
|
|
::= { fsL2VpnPwRedGroupEntry 6 }
|
|
|
|
fsL2VpnPwRedGroupDualHomeApps OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
lagg (0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables the reflection of the attachment circuit status onto both the
|
|
primary and secondary pseudowires. This condition is necessary if the
|
|
peer PEs are connected to a dual-homed device"
|
|
DEFVAL { 0 }
|
|
::= { fsL2VpnPwRedGroupEntry 7 }
|
|
|
|
fsL2VpnPwRedGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name given to the protection group entry. This object is used to
|
|
refer the protection group in addition to the protection group Id. The
|
|
default value for this object will be the null string."
|
|
::= { fsL2VpnPwRedGroupEntry 8 }
|
|
|
|
fsL2VpnPwRedGroupStatus OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
forwardingNegotiaton (0),
|
|
switchoverNegotiaton (1),
|
|
negotiatonSuccess (2),
|
|
waitingToRestore (3),
|
|
redundancyUnAvailable (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter indicate the current status of the PW Redundancy
|
|
Group."
|
|
::= { fsL2VpnPwRedGroupEntry 9 }
|
|
|
|
fsL2VpnPwRedGroupOperActivePw OBJECT-TYPE
|
|
SYNTAX PwIndexOrZeroType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for indicating the pseudo-wire which is currently
|
|
active in a PW Redundancy Group. This parameter will contain reference
|
|
to a valid pwEntry when one of the local PW is forwarding the user
|
|
traffic.
|
|
|
|
When none of the pseudo-wires qualify to be ACTIVE on this node; this
|
|
parameter shall indicate zero.This object is configured after the
|
|
PwSignaling is completed at L2VPN and when the active PW is selected."
|
|
::= { fsL2VpnPwRedGroupEntry 10 }
|
|
|
|
fsL2VpnPwRedGroupWtrTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..180)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This column is used to configure the wait-to-restore timer for the
|
|
pseudowire redundancy group.
|
|
|
|
This column is used to configure the wait-to-restore timer for the
|
|
the revertive mode of operation. In the non-revertive mode of operation,
|
|
any value configured for this object will not be used.
|
|
In the revertive mode of operation, default value for this object will
|
|
be 1"
|
|
::= { fsL2VpnPwRedGroupEntry 11}
|
|
|
|
fsL2VpnPwRedGroupAdminCmd OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lockOutProtection (1),
|
|
clear (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This column is used by the operator to perform some administrative
|
|
operation. The operator requests a command by writing the command
|
|
value to this column.The action for the command issued may or maynot
|
|
happen depending on the protection state.
|
|
The configuration of this object to value (lockOutProtection (1),
|
|
forceSwitchToProtection(2),manualSwitchToWorking (3) are allowed and
|
|
meaningful only when the fsL2VpnPwRedGroupOperActivePw is available.
|
|
|
|
The default value for this object will be 'clear' command indicating
|
|
that no command has been issued."
|
|
DEFVAL { clear}
|
|
::= { fsL2VpnPwRedGroupEntry 12 }
|
|
|
|
fsL2VpnPwRedGroupAdminActivePw OBJECT-TYPE
|
|
SYNTAX PwIndexOrZeroType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used by the operator to forcefully switchover the
|
|
traffic to the specified pseudowire. This operation may or may-not
|
|
succeed depending on the redundancy state machine. Also if this value is
|
|
set, when the fsL2VpnPwRedGroupMasterSlaveMode is set as slave,it
|
|
is expected to throw an error,As slave cannot trigger switchover.
|
|
|
|
This parameter is not saved in non-volatile storage. "
|
|
::= { fsL2VpnPwRedGroupEntry 13 }
|
|
|
|
fsL2VpnPwRedGroupAdminCmdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
accepted (1),
|
|
notApplicable(2),
|
|
rejected(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This column indicates the status of the most recent administrative
|
|
command issued to this protection group through the fsL2VpnPwRedGroupAdminCmd
|
|
object."
|
|
::= { fsL2VpnPwRedGroupEntry 14 }
|
|
|
|
fsL2VpnPwRedGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the status of this row. The valid option supported
|
|
for this table are 'createAndGo' and 'destroy'.Entries in this table
|
|
cannot be modified by the user when the row is active"
|
|
::= { fsL2VpnPwRedGroupEntry 15}
|
|
|
|
|
|
-- Redundancy Set Nodes are added here
|
|
|
|
fsL2VpnPwRedNodeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsL2VpnPwRedNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of sibling PE nodes in PW Redundancy Group. For each node
|
|
corresponding TLDP entity also has to be created in
|
|
MPLS-LDP-STD-MIB::mplsLdpEntityTable."
|
|
::= { pwRedundancyObjects 2 }
|
|
|
|
fsL2VpnPwRedNodeEntry OBJECT-TYPE
|
|
SYNTAX FsL2VpnPwRedNodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a sibling PE node participating the same PW
|
|
Redundancy Group."
|
|
INDEX
|
|
{
|
|
fsL2VpnPwRedGroupIndex,
|
|
fsL2VpnPwRedNodeAddrType,
|
|
fsL2VpnPwRedNodeAddr
|
|
}
|
|
::= { fsL2VpnPwRedNodeTable 1 }
|
|
|
|
FsL2VpnPwRedNodeEntry ::= SEQUENCE
|
|
{
|
|
fsL2VpnPwRedNodeAddrType InetAddressType,
|
|
fsL2VpnPwRedNodeAddr InetAddress,
|
|
fsL2VpnPwRedNodeLocalLdpID MplsLdpIdentifier,
|
|
fsL2VpnPwRedNodeLocalLdpEntityIndex Unsigned32,
|
|
fsL2VpnPwRedNodePeerLdpID MplsLdpIdentifier,
|
|
fsL2VpnPwRedNodeStatus BITS,
|
|
fsL2VpnPwRedNodeRowStatus RowStatus
|
|
}
|
|
|
|
fsL2VpnPwRedNodeAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the internetwork layer address used for ICCP handshaking.
|
|
This object indicates how the value of fsL2VpnPwRedNodeAddr is
|
|
to be interpreted. This parameter will be same as
|
|
MPLS-LDP-STD-MIB::mplsLdpEntityTargetPeerAddrType."
|
|
::= { fsL2VpnPwRedNodeEntry 1 }
|
|
|
|
fsL2VpnPwRedNodeAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (4|16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the internetwork layer address used for the ICCP
|
|
handshaking. The value of fsL2VpnPwRedNodeAddrType specifies how
|
|
this address is to be interpreted. This parameter will be same as
|
|
MPLS-LDP-STD-MIB::mplsLdpEntityTargetPeerAddr."
|
|
::= { fsL2VpnPwRedNodeEntry 2 }
|
|
|
|
fsL2VpnPwRedNodeLocalLdpID OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only parameter indicates the currently used LDP session for
|
|
ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable."
|
|
::= { fsL2VpnPwRedNodeEntry 3 }
|
|
|
|
fsL2VpnPwRedNodeLocalLdpEntityIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only parameter indicates the currently used LDP session for
|
|
ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable."
|
|
::= { fsL2VpnPwRedNodeEntry 4 }
|
|
|
|
fsL2VpnPwRedNodePeerLdpID OBJECT-TYPE
|
|
SYNTAX MplsLdpIdentifier
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only parameter indicates the currently used LDP session for
|
|
ICCP signaling from MPLS-LDP-STD-MIB::mplsLdpSessionTable."
|
|
::= { fsL2VpnPwRedNodeEntry 5 }
|
|
|
|
fsL2VpnPwRedNodeStatus OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
connected (0),
|
|
localSync (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This read-only parameter indicates the sibling node status."
|
|
::= { fsL2VpnPwRedNodeEntry 6 }
|
|
|
|
fsL2VpnPwRedNodeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For creating, modifying, and deleting this row. None of the read-create
|
|
objects in the conceptual rows may be changed when this object is in
|
|
the active(1) state."
|
|
::= { fsL2VpnPwRedNodeEntry 7 }
|
|
|
|
|
|
-- PW Attributes in a redundant set
|
|
|
|
fsL2VpnPwRedPwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsL2VpnPwRedPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This tables gives the information of the pseudowires associated with
|
|
a particular redundancy group and allows to modify/remove PWs in the
|
|
group. The switching of active to standby will occur within the
|
|
pseudowires that are within the redundancy group.
|
|
|
|
This object is derived based on the drafts
|
|
(draft-ietf-pwe3-redundancy-07 & draft-ietf-pwe3-redundancy-bit-07)."
|
|
::= { pwRedundancyObjects 3 }
|
|
|
|
fsL2VpnPwRedPwEntry OBJECT-TYPE
|
|
SYNTAX FsL2VpnPwRedPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This tables allows the user to configure the pseudowire parameters
|
|
specific to redundancy group."
|
|
INDEX
|
|
{
|
|
fsL2VpnPwRedGroupIndex,
|
|
fsL2VpnPwRedPwIndex
|
|
}
|
|
::= { fsL2VpnPwRedPwTable 1 }
|
|
|
|
FsL2VpnPwRedPwEntry ::= SEQUENCE
|
|
{
|
|
fsL2VpnPwRedPwIndex PwIndexOrZeroType,
|
|
fsL2VpnPwRedPwPreferance INTEGER,
|
|
fsL2VpnPwRedPwLocalStatus FsL2VpnPwStatus,
|
|
fsL2VpnPwRedPwRemoteStatus FsL2VpnPwStatus,
|
|
fsL2VpnPwRedPwOperStatus PwOperStatusTC,
|
|
fsL2VpnPwRedPwRowStatus RowStatus
|
|
}
|
|
|
|
fsL2VpnPwRedPwIndex OBJECT-TYPE
|
|
SYNTAX PwIndexOrZeroType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pwIndex of a PW in Redundancy group"
|
|
::= { fsL2VpnPwRedPwEntry 1 }
|
|
|
|
fsL2VpnPwRedPwPreferance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
primary (1),
|
|
secondary (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preference of the pseudowire. If the pseudowire is configured as
|
|
primary it has more chance of becoming active when more than one PW
|
|
qualify for secondary"
|
|
DEFVAL { secondary }
|
|
::= { fsL2VpnPwRedPwEntry 2 }
|
|
|
|
fsL2VpnPwRedPwLocalStatus OBJECT-TYPE
|
|
SYNTAX FsL2VpnPwStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pwLocalStatus of the PW including the preferential FORWARDING and
|
|
SWITCHOVER bit."
|
|
::= { fsL2VpnPwRedPwEntry 3 }
|
|
|
|
fsL2VpnPwRedPwRemoteStatus OBJECT-TYPE
|
|
SYNTAX FsL2VpnPwStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the PFS bit status received from the remote peer
|
|
via LDP signalling."
|
|
::= { fsL2VpnPwRedPwEntry 4 }
|
|
|
|
fsL2VpnPwRedPwOperStatus OBJECT-TYPE
|
|
SYNTAX PwOperStatusTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the PW operational status with the Preferential
|
|
Forwarding status under consideration. When PFS is indicates status as
|
|
'STANDBY' the OPER.STATUS will be 'dormant'."
|
|
::= { fsL2VpnPwRedPwEntry 5 }
|
|
|
|
fsL2VpnPwRedPwRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For creating, modifying, and deleting this row. None of the read-create
|
|
objects in the conceptual rows may be changed when this object is in
|
|
the active(1) state"
|
|
::= { fsL2VpnPwRedPwEntry 6 }
|
|
|
|
|
|
-- ICCP PW Attributes in a redundant set
|
|
|
|
fsL2VpnPwRedIccpPwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsL2VpnPwRedIccpPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This tables gives the information of the pseudowires associated with
|
|
a particular redundancy group and allows to modify/remove PWs in the
|
|
group. The switching of active to standby will occur within the
|
|
pseudowires that are within the redundancy group.
|
|
|
|
This object is derived based on the drafts
|
|
(draft-ietf-pwe3-redundancy-07 & draft-ietf-pwe3-redundancy-bit-07)."
|
|
::= { pwRedundancyObjects 4 }
|
|
|
|
fsL2VpnPwRedIccpPwEntry OBJECT-TYPE
|
|
SYNTAX FsL2VpnPwRedIccpPwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This tables allows the user to configure the pseudowire parameters
|
|
specific to redundancy group."
|
|
INDEX
|
|
{
|
|
fsL2VpnPwRedIccpPwRgIndex,
|
|
fsL2VpnPwRedIccpPwHeadLsr,
|
|
fsL2VpnPwRedIccpPwFecType,
|
|
fsL2VpnPwRedIccpPwTailLsr,
|
|
fsL2VpnPwRedIccpPwGroup,
|
|
fsL2VpnPwRedIccpPwId,
|
|
fsL2VpnPwRedIccpPwAgiType,
|
|
fsL2VpnPwRedIccpPwAgi,
|
|
fsL2VpnPwRedIccpPwLocalAiiType,
|
|
fsL2VpnPwRedIccpPwLocalAii,
|
|
fsL2VpnPwRedIccpPwRemoteAiiType,
|
|
fsL2VpnPwRedIccpPwRemoteAii
|
|
}
|
|
::= { fsL2VpnPwRedIccpPwTable 1 }
|
|
|
|
FsL2VpnPwRedIccpPwEntry ::= SEQUENCE
|
|
{
|
|
fsL2VpnPwRedIccpPwRgIndex Unsigned32,
|
|
fsL2VpnPwRedIccpPwHeadLsr MplsLsrIdentifier,
|
|
fsL2VpnPwRedIccpPwFecType INTEGER,
|
|
fsL2VpnPwRedIccpPwTailLsr MplsLsrIdentifier,
|
|
fsL2VpnPwRedIccpPwGroup PwGroupID,
|
|
fsL2VpnPwRedIccpPwId PwIDType,
|
|
fsL2VpnPwRedIccpPwAgiType INTEGER,
|
|
fsL2VpnPwRedIccpPwAgi OCTET STRING,
|
|
fsL2VpnPwRedIccpPwLocalAiiType INTEGER,
|
|
fsL2VpnPwRedIccpPwLocalAii OCTET STRING,
|
|
fsL2VpnPwRedIccpPwRemoteAiiType INTEGER,
|
|
fsL2VpnPwRedIccpPwRemoteAii OCTET STRING,
|
|
fsL2VpnPwRedIccpPwRoId OCTET STRING,
|
|
fsL2VpnPwRedIccpPwPriority Unsigned32,
|
|
fsL2VpnPwRedIccpPwStatus BITS
|
|
}
|
|
|
|
fsL2VpnPwRedIccpPwRgIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 1 }
|
|
|
|
fsL2VpnPwRedIccpPwHeadLsr OBJECT-TYPE
|
|
SYNTAX MplsLsrIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 2 }
|
|
|
|
fsL2VpnPwRedIccpPwFecType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
manual (1), -- TODO
|
|
pwIdFecSignaling (2),
|
|
genFecSignaling (3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 3 }
|
|
|
|
fsL2VpnPwRedIccpPwTailLsr OBJECT-TYPE
|
|
SYNTAX MplsLsrIdentifier
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 4 }
|
|
|
|
fsL2VpnPwRedIccpPwGroup OBJECT-TYPE
|
|
SYNTAX PwGroupID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 5 }
|
|
|
|
fsL2VpnPwRedIccpPwId OBJECT-TYPE
|
|
SYNTAX PwIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 6 }
|
|
|
|
fsL2VpnPwRedIccpPwAgiType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
type1 (1)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 7 }
|
|
|
|
fsL2VpnPwRedIccpPwAgi OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 8 }
|
|
|
|
fsL2VpnPwRedIccpPwLocalAiiType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
type1 (1),
|
|
type2 (2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 9 }
|
|
|
|
fsL2VpnPwRedIccpPwLocalAii OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4..12))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 10 }
|
|
|
|
fsL2VpnPwRedIccpPwRemoteAiiType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
type1 (1),
|
|
type2 (2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 11 }
|
|
|
|
fsL2VpnPwRedIccpPwRemoteAii OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4..12))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 12 }
|
|
|
|
fsL2VpnPwRedIccpPwRoId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 13 }
|
|
|
|
fsL2VpnPwRedIccpPwPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 14 }
|
|
|
|
fsL2VpnPwRedIccpPwStatus OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
localForward (0),
|
|
localStandby (1),
|
|
localSwitchover (2),
|
|
remoteSwitchover (3),
|
|
remoteAwaited (4),
|
|
nodeSwitchover (6),
|
|
localUpdated (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" "
|
|
::= { fsL2VpnPwRedIccpPwEntry 15 }
|
|
|
|
-- End of ICCP PW attrbutes in a redundant set
|
|
|
|
|
|
-- Definitions of PW Redundancy Notifications - Starts
|
|
|
|
fsL2VpnPwRedSyncFail NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
fsL2VpnPwRedGroupAdminActivePw,
|
|
fsL2VpnPwRedGroupOperActivePw
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the PW FORWARDING/SWITCHOVER status
|
|
negotiation has exceeded the configured fsL2VpnPwRedNegotiationTimeOut
|
|
on a PW Redundancy group."
|
|
::= { fsL2VpnPwRedTraps 1 }
|
|
|
|
fsL2VpnPwRedPwStatus NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
fsL2VpnPwRedPwLocalStatus,
|
|
fsL2VpnPwRedPwRemoteStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the PW status changes for a PW in a
|
|
redundancy group."
|
|
::= { fsL2VpnPwRedTraps 2 }
|
|
|
|
-- Definitions of PW Redundancy Notifications - Ends
|
|
|
|
-- MIB objects for testing L2VPN Redundancy
|
|
|
|
fsL2VpnPwRedSimulateFailure OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
{
|
|
noRgIdTlv (1),
|
|
invalidRgIdTlvLen (2),
|
|
rqstNumZero (3),
|
|
cAndSBitClear(4),
|
|
noPwIdOrGenPwIdTlv (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object is added to trigger Invaid LDP-ICCP message
|
|
|
|
1. noRgIdTlv - Send a RG Application Data Message without RG ID TLV
|
|
2. invalidRgIdTlvLen - Send a RG Application Data Message with Invalid RG ID
|
|
TLV Length (value other than 4)
|
|
3. rqstNumZero - Send a RG Application Data Message with PW-RED Synchronization Request TLV
|
|
with Request number set to zero.
|
|
4. cAndSBitClear - Send a RG Application Data Message with PW-RED Synchronization Request TLV
|
|
with 'C' and 'S' bit clear
|
|
5. noPwIdOrGenPwIdTlv - Send a RG Application Data Message without PW-ID TLV and GEN PW-ID TLV"
|
|
|
|
::= { fsL2VpnPwRedTestObjects 1 }
|
|
|
|
fsL2VpnPwRedSimulateFailureForNbr OBJECT-TYPE
|
|
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object is added to configure the Peer address to which the Inavlid
|
|
packet to be transmitted"
|
|
|
|
::= { fsL2VpnPwRedTestObjects 2 }
|
|
|
|
END
|