WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/aricent/ARICENT-OSPFMI-MIB

3185 lines
112 KiB
Plaintext
Raw Blame History

-- Copyright (C) 2007-2012 Aricent Group . All Rights Reserved
-- $Id: fsmiospf.mib,v 1.21 2016/05/11 11:38:49 siva Exp $
ARICENT-OSPFMI-MIB DEFINITIONS ::= BEGIN
-- Enterprises MIB for OSPF source code product.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
Integer32, IpAddress, enterprises, Unsigned32,
NOTIFICATION-TYPE,TimeTicks
FROM SNMPv2-SMI
TruthValue, RowStatus, DateAndTime, DisplayString
FROM SNMPv2-TC
fsMIStdOspfContextId, fsMIStdOspfEntry, AreaID, RouterID,
BigMetric, Status, PositiveInteger,
TOSType, fsMIStdOspfVirtNbrEntry, fsMIStdOspfRouterId,
fsMIStdOspfNbrRtrId
FROM ARICENT-MISTDOSPF-MIB;
fsMIOspf MODULE-IDENTITY
LAST-UPDATED "201209110000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO "support@aricent.com"
DESCRIPTION
"The Proprietary OSPFMI MIB"
REVISION "201209110000Z"
DESCRIPTION
"The Proprietary OSPFMI MIB"
::= { enterprises futuresoftware (2076) 145 }
fsMIOspfTestGroup OBJECT IDENTIFIER ::= { fsMIOspf 100 }
fsMIOspfNotification OBJECT IDENTIFIER ::= { fsMIOspf 101 }
-- OSPF General Variables
-- These parameters apply globally to the Router's
-- OSPF Process.
fsMIOspfGeneralGroup OBJECT IDENTIFIER ::= { fsMIOspf 1 }
-- SCALAR VARIABLE
fsMIOspfGlobalTraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the global trace and not specific to any context"
::= { fsMIOspfGeneralGroup 1}
fsMIOspfVrfSpfInterval OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum time between two consecutive SPF calculations across two ospf instances.
Time is configured in milli seconds."
DEFVAL {10}
::= { fsMIOspfGeneralGroup 2}
-- Ospf Table
fsMIOspfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to store different context specific ospf parameters"
::= { fsMIOspfGeneralGroup 3}
fsMIOspfEntry OBJECT-TYPE
SYNTAX FsMIOspfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry has routing information"
AUGMENTS { fsMIStdOspfEntry }
::= { fsMIOspfTable 1 }
FsMIOspfEntry ::= SEQUENCE {
fsMIOspfOverFlowState TruthValue,
fsMIOspfPktsRcvd Counter32,
fsMIOspfPktsTxed Counter32,
fsMIOspfPktsDisd Counter32,
fsMIOspfRFC1583Compatibility Status ,
fsMIOspfTraceLevel Integer32,
fsMIOspfMinLsaInterval Integer32,
fsMIOspfABRType INTEGER,
fsMIOspfNssaAsbrDefRtTrans INTEGER,
fsMIOspfDefaultPassiveInterface TruthValue,
fsMIOspfSpfHoldtime Integer32,
fsMIOspfSpfDelay Integer32,
fsMIOspfRestartSupport INTEGER,
fsMIOspfRestartInterval Integer32,
fsMIOspfRestartStrictLsaChecking
TruthValue,
fsMIOspfRestartStatus INTEGER,
fsMIOspfRestartAge Unsigned32,
fsMIOspfRestartExitReason
INTEGER,
fsMIOspfHelperSupport BITS,
fsMIOspfExtTraceLevel Integer32,
fsMIOspfHelperGraceTimeLimit Integer32,
fsMIOspfRestartAckState INTEGER,
fsMIOspfGraceLsaRetransmitCount Integer32,
fsMIOspfRestartReason INTEGER,
fsMIOspfRTStaggeringInterval TimeTicks,
fsMIOspfRouterIdPermanence INTEGER,
fsMIOspfBfdStatus INTEGER,
fsMIOspfBfdAllIfState INTEGER
}
fsMIOspfOverFlowState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether router is in overflow state or not."
DEFVAL { false }
::= { fsMIOspfEntry 1 }
fsMIOspfPktsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total no. of Packets received."
::= { fsMIOspfEntry 2 }
fsMIOspfPktsTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total no. of Packets Transmitted."
::= { fsMIOspfEntry 3 }
fsMIOspfPktsDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total no. of Packets Discarded."
::= { fsMIOspfEntry 4 }
fsMIOspfRFC1583Compatibility OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Controls the preference rules, when chossing among multiple AS external LSAs advertising the same destination.
When set to enabled, the preference rules remain those specified
by RFC1583.
When set to disabled the prference rules are those stated in RFC2178.
Set to enabled by default."
DEFVAL { enabled }
::= { fsMIOspfEntry 5 }
fsMIOspfTraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Trace.
0x00000400 -- Packet Hex Dump Trace.
0x00000800 -- Critical Trace.
0x00001000 -- Function Entry Trace.
0x00002000 -- Function Exit Trace.
0x00004000 -- Memory Allocation Success Trace.
0x00008000 -- Memory Allocation Failure Trace.
0x00010000 -- Hello packet Trace.
0x00020000 -- DDP packet Trace.
0x00040000 -- Link State Request Packet Trace.
0x00080000 -- Link State Update Packet Trace.
0x00100000 -- Link State Acknowledge Packet Trace.
0x00200000 -- Interface State Machine Trace.
0x00400000 -- Neighbor State Machine Trace.
0x00800000 -- Routing Table Calculation Trace.
0x01000000 -- RTM Module Trace.
0x02000000 -- Interface Trace.
0x04000000 -- NSSA Trace.
0x08000000 -- Route Aggregation Trace.
0x10000000 -- Configuration Trace.
0x20000000 -- Adjacency formation Trace.
0x40000000 -- Link State Database Trace.
0x80000000 -- Protocol Packet Processing Trace."
DEFVAL { '00000800'H }
::= { fsMIOspfEntry 12 }
fsMIOspfMinLsaInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time between distinct originations of any particular LSA."
DEFVAL { 5 }
::= { fsMIOspfEntry 13 }
fsMIOspfABRType OBJECT-TYPE
SYNTAX INTEGER {
standardABR (1),
ciscoABR (2),
ibmABR (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Different Types of ABRs supported"
REFERENCE
"RFC-3509 -- Alternative Implementations of OSPF Area Border
Routers"
DEFVAL { standardABR }
::= { fsMIOspfEntry 14 }
fsMIOspfNssaAsbrDefRtTrans OBJECT-TYPE
SYNTAX INTEGER {
enabled (1) ,
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-Bit is set in the generated
Type-7 default Lsa. "
DEFVAL { disabled }
::= { fsMIOspfEntry 15 }
fsMIOspfDefaultPassiveInterface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive."
DEFVAL { false }
::= { fsMIOspfEntry 16 }
fsMIOspfSpfHoldtime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum time between two consecutive SPF calculations in one ospf instances.
Time is configured in milli seconds"
DEFVAL {10}
::= { fsMIOspfEntry 17}
fsMIOspfSpfDelay OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Delay at which routing calculation is carried after a topology change in one ospf instance.
Time is configured in milli seconds"
DEFVAL {1}
::= { fsMIOspfEntry 18}
-- OSPF Graceful Restart related MIB objects
fsMIOspfRestartSupport OBJECT-TYPE
SYNTAX INTEGER {
none (1),
plannedOnly (2),
plannedAndUnplanned (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router.s support for OSPF graceful restart.
Options include: no restart support, only planned
restarts, or both planned and unplanned restarts.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL { none }
::= { fsMIOspfEntry 19}
fsMIOspfRestartInterval OBJECT-TYPE
SYNTAX Integer32 (1..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured OSPF graceful restart timeout interval.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL { 120 }
::= { fsMIOspfEntry 20}
fsMIOspfRestartStrictLsaChecking OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if strict LSA checking is enabled for
graceful restart.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL { false }
::= { fsMIOspfEntry 21}
fsMIOspfRestartStatus OBJECT-TYPE
SYNTAX INTEGER {
notRestarting (1),
plannedRestart (2),
unplannedRestart (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of OSPF graceful restart."
::= { fsMIOspfEntry 22}
fsMIOspfRestartAge OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF graceful restart
interval."
::= { fsMIOspfEntry 23}
fsMIOspfRestartExitReason OBJECT-TYPE
SYNTAX INTEGER {
none (1), -- none attempted
inProgress (2), -- restart in progress
completed (3), -- successfully completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to
-- topology change.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at a
graceful restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is currently underway."
::= { fsMIOspfEntry 24}
fsMIOspfHelperSupport OBJECT-TYPE
SYNTAX BITS {
unknown (0),
softwareRestart (1),
swReloadUpgrade (2),
switchToRedundant(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router.s helper support for OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
fsMIOspfHelperSupport is indicated by bitmap.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.
By default, all bits are set."
::= { fsMIOspfEntry 25}
fsMIOspfExtTraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to define level of trace required for OSPF Ext.
Levels are defined as follows.
0x00000100 -- Restart Module.
0x00000200 -- Helper Module.
0x00000400 -- HA Module."
::= { fsMIOspfEntry 26 }
fsMIOspfHelperGraceTimeLimit OBJECT-TYPE
SYNTAX Integer32 (0..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured OSPF graceful restart interval limit in helper side.
Time is configured in seconds
This object is persistent and when written the entity
SHOULD save the change to non-volatile storage."
DEFVAL {0}
::= { fsMIOspfEntry 27}
fsMIOspfRestartAckState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL {enabled}
::= { fsMIOspfEntry 28}
fsMIOspfGraceLsaRetransmitCount OBJECT-TYPE
SYNTAX Integer32 (0..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retransmissions for unacknowledged GraceLSAs"
DEFVAL {2}
::= { fsMIOspfEntry 29}
fsMIOspfRestartReason OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
softwareRestart (1),
swReloadUpgrade (2),
switchToRedundant(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router.s restarter reason code of OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage."
DEFVAL {unknown}
::= { fsMIOspfEntry 30}
fsMIOspfRTStaggeringInterval OBJECT-TYPE
SYNTAX TimeTicks (1000..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPF operations.Default value of
this object is equal to Hello Interval"
DEFVAL {10000}
::= { fsMIOspfEntry 31}
fsMIOspfRouterIdPermanence OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1), -- derived from internal logic ( lowest IP Address)
permanent (2) -- user-configured
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable displays the status of the ospfRouterId.
'dynamic' and 'permanent' refer to how the ospfRouterId
is derived. This object is used to save and restore the
ospfRouterId value. This object is not configurable
by the user since this object is used for internal purpose."
DEFVAL { dynamic }
::= { fsMIOspfEntry 32 }
fsMIOspfBfdStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to enable/disable BFD feature in OSPF.By default is enabled.
If it is disabled OSPF will not register with BFD for neighbor IP path monitoring"
DEFVAL { disabled }
::= { fsMIOspfEntry 33 }
fsMIOspfBfdAllIfState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is to enable/disable BFD for all OSPF interfaces
By default it is disabled. If it is enabled, OSPF will register
with BFD for neighbor IP path monitoring, when the OSPF neighbor state
becomes FULL. Enabling this object will internally enable BFD for all the
interface entries.
When it is disabled, it will de-register from BFD for all the neighbors
associated with any of the OSPF interface and no longer allows any
registration with BFD for neighbor Path monitoring"
DEFVAL { disabled }
::= { fsMIOspfEntry 34 }
-- SCALAR VARIABLE
fsMIOspfRTStaggeringStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of route table calculation
staggering option"
DEFVAL { enabled }
::= { fsMIOspfGeneralGroup 4}
--MIB objectts related to OSPF Hot-Standby
fsMIOspfHotStandbyAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High Availabilty feature enabled or disabled in OSPF"
::= { fsMIOspfGeneralGroup 5}
fsMIOspfHotStandbyState OBJECT-TYPE
SYNTAX INTEGER {
init(1),
activeStandbyUp(2),
activeStandbyDown(3),
standby(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal State of the OSPF instance.
init(1) implies that the OSPF instance is up, but is unaware
of the status of its peer.
activeStandbyUp(2) implies that the current OSPF instance is up
and functioning as active node and its peer is functioning as
the standby.
activeStandbyDown(3) implies that the current OSPF instance
is up and functioning as active node but its peer is down/not
functioning.
standby(4) implies the status of the standby Instance."
::= { fsMIOspfGeneralGroup 6}
fsMIOspfDynamicBulkUpdStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(1),
inProgress(2),
completed(3),
aborted(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of dynamic bulk update between active and dynamic
OSPF instance."
::= { fsMIOspfGeneralGroup 7}
fsMIOspfStanbyHelloSyncCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hello packets synced to standby node."
::= { fsMIOspfGeneralGroup 8}
fsMIOspfStanbyLsaSyncCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of LSAs synced to standby node."
::= { fsMIOspfGeneralGroup 9}
fsMIOspfGlobalExtTraceLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the global trace for OSPF Extension and not specific
to any context"
::= { fsMIOspfGeneralGroup 10}
-- OSPF AreaTable.
-- The fsMIOspfAreaTable is an extention to the OspfAreaTable
-- and has statistics associated with each area.
fsMIOspfAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parame-
ters and cumulative statistics of the router's
attached areas."
::= { fsMIOspf 2 }
fsMIOspfAreaEntry OBJECT-TYPE
SYNTAX FsMIOspfAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas."
INDEX {fsMIStdOspfContextId,fsMIOspfAreaId}
::= { fsMIOspfAreaTable 1 }
FsMIOspfAreaEntry ::= SEQUENCE {
fsMIOspfAreaId AreaID,
fsMIOspfAreaIfCount Gauge32,
fsMIOspfAreaNetCount Gauge32,
fsMIOspfAreaRtrCount Gauge32,
fsMIOspfAreaNSSATranslatorRole INTEGER,
fsMIOspfAreaNSSATranslatorState INTEGER,
fsMIOspfAreaNSSATranslatorStabilityInterval PositiveInteger,
fsMIOspfAreaNSSATranslatorEvents Counter32,
fsMIOspfAreaDfInfOriginate INTEGER
}
fsMIOspfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIOspfAreaEntry 1 }
fsMIOspfAreaIfCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total no. of Ifaces in the Area "
::= { fsMIOspfAreaEntry 2 }
fsMIOspfAreaNetCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total no. of Networks in the Area. "
::= { fsMIOspfAreaEntry 3 }
fsMIOspfAreaRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total no. of Routers in the Area. "
::= { fsMIOspfAreaEntry 4 }
fsMIOspfAreaNSSATranslatorRole OBJECT-TYPE
SYNTAX INTEGER { always (1),candidate (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Indicate's an NSSA Border router's ability
to perform NSSA Translation of Type-7 LSAs
to Type-5 LSAs. "
DEFVAL { candidate }
::= { fsMIOspfAreaEntry 5 }
fsMIOspfAreaNSSATranslatorState OBJECT-TYPE
SYNTAX INTEGER { enabled (1),elected (2),
disabled (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicate's if and how an NSSA Border router is
performing NSSA translation of Type-7 to into Type-5
LSAs.When this object is set to enabled, the NSSA border
router's fsMIOspfAreaNssaTranslatorRole has been set to
always.When this object is set to elected,a candidate
NSSA border router is translating Type-7 to Type-5 LSAs.
When this object is set to disabled, a candidate NSSA
Border router is not performing translation. "
DEFVAL { disabled }
::= { fsMIOspfAreaEntry 6 }
fsMIOspfAreaNSSATranslatorStabilityInterval OBJECT-TYPE
SYNTAX PositiveInteger
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties."
DEFVAL { 40 }
::= { fsMIOspfAreaEntry 7 }
fsMIOspfAreaNSSATranslatorEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the number of translator state
changes that have occured since the last boot-up. "
::= { fsMIOspfAreaEntry 8 }
fsMIOspfAreaDfInfOriginate OBJECT-TYPE
SYNTAX INTEGER { enabled (1),disabled (2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Indicates the generation default Type-7 LSA. "
DEFVAL { disabled }
::= { fsMIOspfAreaEntry 9 }
-- OSPF Host Table
-- The fsMIOspfHostTable is an extention to the OspfHostTable
-- and has interface informtion to reach the host.
fsMIOspfHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The list of Hosts, and their metrics, that the
router will advertise as host routes."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parameters"
::= { fsMIOspf 3 }
fsMIOspfHostEntry OBJECT-TYPE
SYNTAX FsMIOspfHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A metric to be advertised, for a given type of
service, when a given host is reachable."
INDEX {fsMIStdOspfContextId, fsMIOspfHostIpAddress, fsMIOspfHostTOS}
::= { fsMIOspfHostTable 1 }
FsMIOspfHostEntry ::= SEQUENCE {
fsMIOspfHostIpAddress IpAddress,
fsMIOspfHostTOS TOSType,
fsMIOspfHostRouteIfIndex Integer32
}
fsMIOspfHostIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the Host."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parameters"
::= { fsMIOspfHostEntry 1 }
fsMIOspfHostTOS OBJECT-TYPE
SYNTAX TOSType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Type of Service of the route being configured."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parameters"
::= { fsMIOspfHostEntry 2 }
fsMIOspfHostRouteIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Interface to reach the host"
::= { fsMIOspfHostEntry 3 }
-- OSPF Interface Table
-- The fsMIOspfIfTable is an extention to the OspfIfTable
-- and has statistical information associted with each interface.
fsMIOspfIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { fsMIOspf 4 }
fsMIOspfIfEntry OBJECT-TYPE
SYNTAX FsMIOspfIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF."
INDEX {fsMIStdOspfContextId,fsMIOspfIfIpAddress, fsMIOspfAddressLessIf }
::= { fsMIOspfIfTable 1 }
FsMIOspfIfEntry ::= SEQUENCE {
fsMIOspfIfIpAddress IpAddress,
fsMIOspfAddressLessIf Integer32,
fsMIOspfIfOperState INTEGER,
fsMIOspfIfPassive TruthValue,
fsMIOspfIfNbrCount Gauge32,
fsMIOspfIfAdjCount Gauge32,
fsMIOspfIfHelloRcvd Counter32,
fsMIOspfIfHelloTxed Counter32,
fsMIOspfIfHelloDisd Counter32,
fsMIOspfIfDdpRcvd Counter32,
fsMIOspfIfDdpTxed Counter32,
fsMIOspfIfDdpDisd Counter32,
fsMIOspfIfLrqRcvd Counter32,
fsMIOspfIfLrqTxed Counter32,
fsMIOspfIfLrqDisd Counter32,
fsMIOspfIfLsuRcvd Counter32,
fsMIOspfIfLsuTxed Counter32,
fsMIOspfIfLsuDisd Counter32,
fsMIOspfIfLakRcvd Counter32,
fsMIOspfIfLakTxed Counter32,
fsMIOspfIfLakDisd Counter32,
fsMIOspfIfBfdState INTEGER
}
fsMIOspfIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this OSPF interface."
::= { fsMIOspfIfEntry 1 }
fsMIOspfAddressLessIf OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address."
::= { fsMIOspfIfEntry 2 }
fsMIOspfIfOperState OBJECT-TYPE
SYNTAX INTEGER {
operup (1),
operdown (2),
loopback (3),
unloop (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Operational Status of the Interface."
::= { fsMIOspfIfEntry 3 }
fsMIOspfIfPassive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used to make the inteface as passive.
If set to TRUE, then interface will be passive
If set to FALSE then interface will be normal"
::= { fsMIOspfIfEntry 4 }
fsMIOspfIfNbrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Neighbour's through
that Interface."
::= { fsMIOspfIfEntry 5 }
fsMIOspfIfAdjCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Adjacencies through
that Interface."
::= { fsMIOspfIfEntry 6 }
fsMIOspfIfHelloRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets received
through that Interface."
::= { fsMIOspfIfEntry 7 }
fsMIOspfIfHelloTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets
transmitted through that Interface."
::= { fsMIOspfIfEntry 8 }
fsMIOspfIfHelloDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Hello packets
discarded through that Interface."
::= { fsMIOspfIfEntry 9 }
fsMIOspfIfDdpRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets received
through that Interface."
::= { fsMIOspfIfEntry 10 }
fsMIOspfIfDdpTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets
transmitted through that Interface."
::= { fsMIOspfIfEntry 11 }
fsMIOspfIfDdpDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Ddp packets discarded
through that Interface."
::= { fsMIOspfIfEntry 12 }
fsMIOspfIfLrqRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets received
through that Interface."
::= { fsMIOspfIfEntry 13 }
fsMIOspfIfLrqTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets
transmitted through that Interface."
::= { fsMIOspfIfEntry 14 }
fsMIOspfIfLrqDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lrq packets discarded
through that Interface."
::= { fsMIOspfIfEntry 15 }
fsMIOspfIfLsuRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets received
through that Interface."
::= { fsMIOspfIfEntry 16 }
fsMIOspfIfLsuTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets
transmitted through that Interface."
::= { fsMIOspfIfEntry 17 }
fsMIOspfIfLsuDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lsu packets discarded
through that Interface."
::= { fsMIOspfIfEntry 18 }
fsMIOspfIfLakRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lak packets received
through that Interface."
::= { fsMIOspfIfEntry 19 }
fsMIOspfIfLakTxed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This gives the Total number of Lak packets
transmitted through that Interface."
::= { fsMIOspfIfEntry 20 }
fsMIOspfIfLakDisd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Total number of Lak packets discarded
on that Interface."
::= { fsMIOspfIfEntry 21 }
fsMIOspfIfBfdState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is to enable/disable BFD in a specific OSPF interface.
By default it is disabled. But when fsMIOspfBfdAllIfState is enabled,
internally this object will be enabled for all interface entries.
If fsMIOspfBfdAllIfState is disabled and this (fsMIOspfIfBfdState) object
is enabled, then OSPF will register with BFD for monitoring the neighbor
IP path, for the neighbors associated with this OSPF interface alone.
When it is disabled, it will de-register from BFD for the all the neighbors
associated with this interface and no longer allows registration with BFD
for the neighbors associated with this interface."
DEFVAL { disabled }
::= { fsMIOspfIfEntry 22 }
-- OSPF Interface MD5 Authentication Table
fsMIOspfIfMD5AuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfIfMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication."
REFERENCE
"OSPF Version 2, Appendix D.3 Cryptographic Authentication"
::= { fsMIOspf 5 }
fsMIOspfIfMD5AuthEntry OBJECT-TYPE
SYNTAX FsMIOspfIfMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface MD5 Auththentication Entry describes one
Authentication Key from the viewpoint of OSPF."
INDEX {fsMIStdOspfContextId, fsMIOspfIfMD5AuthIpAddress, fsMIOspfIfMD5AuthAddressLessIf,
fsMIOspfIfMD5AuthKeyId }
::= { fsMIOspfIfMD5AuthTable 1 }
FsMIOspfIfMD5AuthEntry ::= SEQUENCE {
fsMIOspfIfMD5AuthIpAddress IpAddress,
fsMIOspfIfMD5AuthAddressLessIf Integer32,
fsMIOspfIfMD5AuthKeyId Integer32,
fsMIOspfIfMD5AuthKey OCTET STRING,
fsMIOspfIfMD5AuthKeyStartAccept Integer32,
fsMIOspfIfMD5AuthKeyStartGenerate Integer32,
fsMIOspfIfMD5AuthKeyStopGenerate Integer32,
fsMIOspfIfMD5AuthKeyStopAccept Integer32,
fsMIOspfIfMD5AuthKeyStatus INTEGER
}
fsMIOspfIfMD5AuthIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this OSPF interface."
::= { fsMIOspfIfMD5AuthEntry 1 }
fsMIOspfIfMD5AuthAddressLessIf OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address."
::= { fsMIOspfIfMD5AuthEntry 2 }
fsMIOspfIfMD5AuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object identifies the secret key used to create the
message digest appended to the OSPF packet."
::= { fsMIOspfIfMD5AuthEntry 3 }
fsMIOspfIfMD5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the secret key which is used to create the
message digest appended to the OSPF packet."
::= { fsMIOspfIfMD5AuthEntry 4 }
fsMIOspfIfMD5AuthKeyStartAccept OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will start accepting packets that have
been created with this key. The value shown will be configured
time + system time at which the value is configured."
::= { fsMIOspfIfMD5AuthEntry 5 }
fsMIOspfIfMD5AuthKeyStartGenerate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will start using this key for packets
generation.The value shown will be configured
time + system time at which the value is configured. "
::= { fsMIOspfIfMD5AuthEntry 6 }
fsMIOspfIfMD5AuthKeyStopGenerate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will stop using this key for packets
generation. The value -1 indicates infinite lifetime.The
value shown will be configured time + system time at which
the value is configured."
DEFVAL { -1 }
::= { fsMIOspfIfMD5AuthEntry 7 }
fsMIOspfIfMD5AuthKeyStopAccept OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will stop accepting packets that have
been created with this key. The value -1 indicates infinite
lifetime.The value shown will be configured
time + system time at which the value is configured. "
DEFVAL { -1 }
::= { fsMIOspfIfMD5AuthEntry 8 }
fsMIOspfIfMD5AuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Identifies the status of the key.
NOTE:invalid (2) currently not supported"
::= { fsMIOspfIfMD5AuthEntry 9 }
-- OSPF Virtual Interface MD5 Authentication Table
fsMIOspfVirtIfMD5AuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfVirtIfMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication."
REFERENCE
"OSPF Version 2, Appendix D.3 Cryptographic Authentication"
::= { fsMIOspf 6 }
fsMIOspfVirtIfMD5AuthEntry OBJECT-TYPE
SYNTAX FsMIOspfVirtIfMD5AuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface MD5 Auththentication Entry describes one
Authentication Key from the viewpoint of OSPF."
INDEX {fsMIStdOspfContextId,fsMIOspfVirtIfMD5AuthAreaId,fsMIOspfVirtIfMD5AuthNeighbor,
fsMIOspfVirtIfMD5AuthKeyId}
::= { fsMIOspfVirtIfMD5AuthTable 1 }
FsMIOspfVirtIfMD5AuthEntry ::= SEQUENCE {
fsMIOspfVirtIfMD5AuthAreaId AreaID,
fsMIOspfVirtIfMD5AuthNeighbor RouterID,
fsMIOspfVirtIfMD5AuthKeyId Integer32,
fsMIOspfVirtIfMD5AuthKey OCTET STRING,
fsMIOspfVirtIfMD5AuthKeyStartAccept Integer32,
fsMIOspfVirtIfMD5AuthKeyStartGenerate Integer32,
fsMIOspfVirtIfMD5AuthKeyStopGenerate Integer32,
fsMIOspfVirtIfMD5AuthKeyStopAccept Integer32,
fsMIOspfVirtIfMD5AuthKeyStatus INTEGER
}
fsMIOspfVirtIfMD5AuthAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The Transit Area that the Virtual Link
traverses. By definition, this should not be 0.0.0.0."
::= { fsMIOspfVirtIfMD5AuthEntry 1 }
fsMIOspfVirtIfMD5AuthNeighbor OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The Router ID of the Virtual Neighbor."
::= { fsMIOspfVirtIfMD5AuthEntry 2 }
fsMIOspfVirtIfMD5AuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object identifies the secret key used to create the
message digest appended to the OSPF packet."
::= { fsMIOspfVirtIfMD5AuthEntry 3 }
fsMIOspfVirtIfMD5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the secret key which is used to create the
message digest appended to the OSPF packet."
::= { fsMIOspfVirtIfMD5AuthEntry 4 }
fsMIOspfVirtIfMD5AuthKeyStartAccept OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will start accepting packets that have
been created with this key.The value shown will be configured
time + system time at which the value is configured."
::= { fsMIOspfVirtIfMD5AuthEntry 5 }
fsMIOspfVirtIfMD5AuthKeyStartGenerate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will start using this key for packet
generation.The value shown will be configured
time + system time at which the value is configured."
::= { fsMIOspfVirtIfMD5AuthEntry 6 }
fsMIOspfVirtIfMD5AuthKeyStopGenerate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will stop using this key for packets
generation. The value -1 indicates infinite lifetime.The value
shown will be configured time + system time at which the value
is configured."
DEFVAL { -1 }
::= { fsMIOspfVirtIfMD5AuthEntry 7 }
fsMIOspfVirtIfMD5AuthKeyStopAccept OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The time the router will stop accepting packets that have
been created with this key. The value -1 indicates infinite
lifetime. The value shown will be configured
time + system time at which the value is configured."
DEFVAL { -1 }
::= { fsMIOspfVirtIfMD5AuthEntry 8 }
fsMIOspfVirtIfMD5AuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Identifies the status of the key.
NOTE: invalid (2) is currently not supported"
::= { fsMIOspfVirtIfMD5AuthEntry 9 }
-- OSPF Neighbor Table
fsMIOspfNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { fsMIOspf 7 }
fsMIOspfNbrEntry OBJECT-TYPE
SYNTAX FsMIOspfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single neighbor."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX {fsMIStdOspfContextId,fsMIOspfNbrIpAddr, fsMIOspfNbrAddressLessIndex }
::= { fsMIOspfNbrTable 1 }
FsMIOspfNbrEntry ::= SEQUENCE {
fsMIOspfNbrIpAddr IpAddress,
fsMIOspfNbrAddressLessIndex Integer32,
fsMIOspfNbrDBSummaryQLen Gauge32,
fsMIOspfNbrLSReqQLen Gauge32,
fsMIOspfNbrRestartHelperStatus
INTEGER,
fsMIOspfNbrRestartHelperAge Unsigned32,
fsMIOspfNbrRestartHelperExitReason
INTEGER,
fsMIOspfNbrBfdState INTEGER
}
fsMIOspfNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The IP address this neighbor is using in its
IP Source Address. Note that, on addressless
links, this will not be 0.0.0.0, but the ad-
dress of another of the neighbor's interfaces."
::= { fsMIOspfNbrEntry 1 }
fsMIOspfNbrAddressLessIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" On an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance."
::= { fsMIOspfNbrEntry 2 }
fsMIOspfNbrDBSummaryQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Que Length of the Database summary List ."
::= { fsMIOspfNbrEntry 3 }
fsMIOspfNbrLSReqQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This gives the Length of Link State Request Que ."
::= { fsMIOspfNbrEntry 4 }
fsMIOspfNbrRestartHelperStatus OBJECT-TYPE
SYNTAX INTEGER {
notHelping (1),
helping (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates whether the router is acting
as a graceful restart helper for the neighbor."
::= { fsMIOspfNbrEntry 5 }
fsMIOspfNbrRestartHelperAge OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Remaining time in current OSPF graceful restart
interval, if the router is acting as a restart
helper for the neighbor."
::= { fsMIOspfNbrEntry 6 }
fsMIOspfNbrRestartHelperExitReason OBJECT-TYPE
SYNTAX INTEGER { none (1), -- not attempted
inProgress (2), -- restart in progress
completed (3), -- successfully completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to topology
-- change.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Describes the outcome of the last attempt at acting
as a graceful restart helper for the neighbor."
::= { fsMIOspfNbrEntry 7 }
fsMIOspfNbrBfdState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is a read-only object. This will be enabled internally only when BFD is
enabled for monitoring this neighbor IP path."
::= { fsMIOspfNbrEntry 8 }
-- Routing Table
fsMIOspfRoutingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfRoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of routing information."
::= { fsMIOspf 8 }
fsMIOspfRoutingEntry OBJECT-TYPE
SYNTAX FsMIOspfRoutingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single route."
INDEX {fsMIStdOspfContextId,fsMIOspfRouteIpAddr,fsMIOspfRouteIpAddrMask,
fsMIOspfRouteIpTos,fsMIOspfRouteIpNextHop }
::= { fsMIOspfRoutingTable 1 }
FsMIOspfRoutingEntry ::= SEQUENCE {
fsMIOspfRouteIpAddr IpAddress,
fsMIOspfRouteIpAddrMask IpAddress,
fsMIOspfRouteIpTos TOSType,
fsMIOspfRouteIpNextHop IpAddress,
fsMIOspfRouteType INTEGER,
fsMIOspfRouteAreaId IpAddress,
fsMIOspfRouteCost BigMetric,
fsMIOspfRouteType2Cost BigMetric,
fsMIOspfRouteInterfaceIndex Integer32
}
fsMIOspfRouteIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" IP Address of the route "
::= { fsMIOspfRoutingEntry 1 }
fsMIOspfRouteIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" IP Address Mask of the route "
::= { fsMIOspfRoutingEntry 2 }
fsMIOspfRouteIpTos OBJECT-TYPE
SYNTAX TOSType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" IP TOS of the route "
::= { fsMIOspfRoutingEntry 3 }
fsMIOspfRouteIpNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" IP Next Hop of the route "
::= { fsMIOspfRoutingEntry 4 }
fsMIOspfRouteType OBJECT-TYPE
SYNTAX INTEGER {
intraArea (1),
interArea (2),
type1External (3),
type2External (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the route"
::= { fsMIOspfRoutingEntry 5 }
fsMIOspfRouteAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Area ID associated with the route "
::= { fsMIOspfRoutingEntry 6 }
fsMIOspfRouteCost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedence."
::= { fsMIOspfRoutingEntry 7 }
fsMIOspfRouteType2Cost OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the need for conversion of external costs to
internal link state metrics."
::= { fsMIOspfRoutingEntry 8 }
fsMIOspfRouteInterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Interface Index associated with the route"
::= { fsMIOspfRoutingEntry 9 }
-- Secondary IP Address Table
fsMIOspfSecIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfSecIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Secondary IP Address information."
::= { fsMIOspf 9 }
fsMIOspfSecIfEntry OBJECT-TYPE
SYNTAX FsMIOspfSecIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single route."
INDEX {fsMIStdOspfContextId,fsMIOspfPrimIpAddr,fsMIOspfPrimAddresslessIf,fsMIOspfSecIpAddr,fsMIOspfSecIpAddrMask }
::= { fsMIOspfSecIfTable 1 }
FsMIOspfSecIfEntry ::= SEQUENCE {
fsMIOspfPrimIpAddr IpAddress,
fsMIOspfPrimAddresslessIf Integer32,
fsMIOspfSecIpAddr IpAddress,
fsMIOspfSecIpAddrMask IpAddress,
fsMIOspfSecIfStatus RowStatus
}
fsMIOspfPrimIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Primary Interface IP Address."
::= { fsMIOspfSecIfEntry 1 }
fsMIOspfPrimAddresslessIf OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Primary Interface Addressless Index."
::= { fsMIOspfSecIfEntry 2 }
fsMIOspfSecIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Secondary Interface IP Address."
::= { fsMIOspfSecIfEntry 3 }
fsMIOspfSecIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Secondary Interface IP Address Mask."
::= { fsMIOspfSecIfEntry 4 }
fsMIOspfSecIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This variable displays the status of the entry.
Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent."
::= { fsMIOspfSecIfEntry 5 }
--fsOspfn
-- Area Aggregate Table
-- The fsMIOspfAreaAggregateTable is an extension to the
-- OspfAreaAggregateTable to support external Tag for address
-- range configured.
fsMIOspfAreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfAreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supports configuration of External Tag for
Type-7 Address ranges configured. "
::= { fsMIOspf 10 }
fsMIOspfAreaAggregateEntry OBJECT-TYPE
SYNTAX FsMIOspfAreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supports configuration of External Tag for
Type-7 Address ranges configured. "
INDEX {fsMIStdOspfContextId, fsMIOspfAreaAggregateAreaID, fsMIOspfAreaAggregateLsdbType,
fsMIOspfAreaAggregateNet, fsMIOspfAreaAggregateMask}
::= {fsMIOspfAreaAggregateTable 1 }
FsMIOspfAreaAggregateEntry ::=
SEQUENCE {
fsMIOspfAreaAggregateAreaID
AreaID,
fsMIOspfAreaAggregateLsdbType
INTEGER,
fsMIOspfAreaAggregateNet
IpAddress,
fsMIOspfAreaAggregateMask
IpAddress,
fsMIOspfAreaAggregateExternalTag
Integer32
}
fsMIOspfAreaAggregateAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Area the Address Aggregate is to be found
within."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIOspfAreaAggregateEntry 1 }
fsMIOspfAreaAggregateLsdbType OBJECT-TYPE
SYNTAX INTEGER {
summaryLink (3),
nssaExternalLink (7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { fsMIOspfAreaAggregateEntry 2 }
fsMIOspfAreaAggregateNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the Net or Subnet indicated
by the range."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIOspfAreaAggregateEntry 3 }
fsMIOspfAreaAggregateMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Subnet Mask that pertains to the Net or
Subnet."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIOspfAreaAggregateEntry 4 }
fsMIOspfAreaAggregateExternalTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 32-bit field attached to each external route.
This is not used by OSPF protocol itself. It may
be used to communicate information between AS
boundary routers. The precise nature of this information
is outside the scope of OSPF. "
::= { fsMIOspfAreaAggregateEntry 5 }
--fsOspfn
-- AsExternalAggregation Table
fsMIOspfAsExternalAggregationTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfAsExternalAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated. "
::= { fsMIOspf 11 }
fsMIOspfAsExternalAggregationEntry OBJECT-TYPE
SYNTAX FsMIOspfAsExternalAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed. "
INDEX {fsMIStdOspfContextId, fsMIOspfAsExternalAggregationNet, fsMIOspfAsExternalAggregationMask,
fsMIOspfAsExternalAggregationAreaId }
::= {fsMIOspfAsExternalAggregationTable 1 }
FsMIOspfAsExternalAggregationEntry ::=
SEQUENCE {
fsMIOspfAsExternalAggregationNet
IpAddress,
fsMIOspfAsExternalAggregationMask
IpAddress,
fsMIOspfAsExternalAggregationAreaId
AreaID,
fsMIOspfAsExternalAggregationEffect
INTEGER,
fsMIOspfAsExternalAggregationTranslation
INTEGER,
fsMIOspfAsExternalAggregationStatus
RowStatus
}
fsMIOspfAsExternalAggregationNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the Net indicated by
the range. "
::= { fsMIOspfAsExternalAggregationEntry 1 }
fsMIOspfAsExternalAggregationMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask that pertains to the
range. "
::= { fsMIOspfAsExternalAggregationEntry 2 }
fsMIOspfAsExternalAggregationAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Refer to description in fsMIOspfAsExternalAggregationEffect."
::= { fsMIOspfAsExternalAggregationEntry 3 }
fsMIOspfAsExternalAggregationEffect OBJECT-TYPE
SYNTAX INTEGER {
advertise (1),
doNotAdvertise (2),
allowAll (3),
denyAll (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Type-5/Type-7 will be aggregated or not
generated for the specified range.
When set to allowAll (3) and associated areaId is 0.0.0.0
aggregated Type-5 are generated for the specified range. In
addition aggregated Type-7 are generated in all attached NSSA
areas, for the specified range.Value allowAll (3) is not valid
for areaId other than 0.0.0.0
When set to denyAll (4) neither Type-5 nor Type-7 will be
generated for the specified range. Value denyAll (4) is not
valid for areaID other than 0.0.0.0
When set to advertise (1) and associated areaId is 0.0.0.0,
aggregated Type-5 are generated.Otherwise if associated areaId
is x.x.x.x(other than 0.0.0.0) aggregated Type-7 is generated
in NSSA area x.x.x.x
When set to doNotAdvertise (2) and associated areaId is 0.0.0.0,
Type-5 is not generated for the specified range, while aggregated
Type-7 are generated in all attached NSSA areas.While if associated
areaId is x.x.x.x(other than 0.0.0.0), Type-7 are not generated in
NSSA area x.x.x.x for the specified range. "
DEFVAL { advertise }
::= { fsMIOspfAsExternalAggregationEntry 4 }
fsMIOspfAsExternalAggregationTranslation OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This when set to enabled, P Bit is set in
the generated Type-7 LSA. When set disabled
P Bit is clear in the generated Type-7 LSA
for the range. "
DEFVAL { enabled }
::= { fsMIOspfAsExternalAggregationEntry 5 }
fsMIOspfAsExternalAggregationStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative."
::= { fsMIOspfAsExternalAggregationEntry 6 }
-- Opaque LSA Support objects
fsMIOspfOpaqueLSAGroup OBJECT IDENTIFIER ::= { fsMIOspf 12 }
fsMIOspfOpaqueLSAGeneralGroup OBJECT IDENTIFIER
::= { fsMIOspfOpaqueLSAGroup 1 }
-- OSPF Opaque LSA Support General Variables
-- These parameters apply globally to the Router's
-- OSPF Process.
fsMIOspfOpaqueTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfOpaqueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the count and check the type 11LSAs. "
::= { fsMIOspfOpaqueLSAGeneralGroup 1 }
fsMIOspfOpaqueEntry OBJECT-TYPE
SYNTAX FsMIOspfOpaqueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Information describing the type 11 LSAs Count and checksum ."
AUGMENTS { fsMIStdOspfEntry }
::= { fsMIOspfOpaqueTable 1 }
FsMIOspfOpaqueEntry ::= SEQUENCE {
fsMIOspfOpaqueOption INTEGER,
fsMIOspfType11LsaCount Gauge32,
fsMIOspfType11LsaCksumSum Integer32,
fsMIOspfAreaIDValid TruthValue
}
fsMIOspfOpaqueOption OBJECT-TYPE
SYNTAX INTEGER {
enabled (1) ,
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether router is Opaque-Capable or not"
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
DEFVAL { disabled }
::= { fsMIOspfOpaqueEntry 1 }
fsMIOspfType11LsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LS type 11 link-state
advertisements in the link-state database."
REFERENCE
"The Opaque LSA Option, Section 5.0 Management Considerations"
::= { fsMIOspfOpaqueEntry 2 }
fsMIOspfType11LsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the LS checksums of
the Type 11 link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link-state database of two
routers."
::= { fsMIOspfOpaqueEntry 3 }
fsMIOspfAreaIDValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether an application is expected to provide
the AreaId, while generating a type-10 opaque LSA. This value
will be true if an application can provide the AreaId otherwise
false. In case of false the Opaque module will determine the
associated area for a Type-10 LSA based on the interface to which
the LSA is associated."
DEFVAL { false }
::= { fsMIOspfOpaqueEntry 4 }
-- The OSPF OPAQUE Interface Data Structure contains information
-- regarding the count and checksum of Type 9 LSAs.
fsMIOspfOpaqueInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfOpaqueInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the count and checksum of the Type9 LSAs."
REFERENCE
"The Opaque LSA Option , Section 5.0 Management Considerations"
::= { fsMIOspfOpaqueLSAGroup 2 }
fsMIOspfOpaqueInterfaceEntry OBJECT-TYPE
SYNTAX FsMIOspfOpaqueInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the Type 9 LSAs Count and Checksums."
AUGMENTS { fsMIOspfIfEntry }
::= { fsMIOspfOpaqueInterfaceTable 1 }
FsMIOspfOpaqueInterfaceEntry ::= SEQUENCE {
fsMIOspfOpaqueType9LsaCount Gauge32,
fsMIOspfOpaqueType9LsaCksumSum Integer32
}
fsMIOspfOpaqueType9LsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of TYPE 9 Opaque link-state advertisements."
::= { fsMIOspfOpaqueInterfaceEntry 1 }
fsMIOspfOpaqueType9LsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the link-state ad-
vertisements' TYPE9 Opaque LS checksums.The sum
change in a router's link state data-base, and
to compare the link-state database of the two
routers."
DEFVAL { 0 }
::= { fsMIOspfOpaqueInterfaceEntry 2 }
-- OSPF Opaque LSA TYPE9 Link State Database
-- The Link State Database contains Type 9 Opaque Link State
-- Advertisements .
-- kihsoreky Removed Areaid as the index to this table.
fsMIOspfType9LsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfType9LsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's TYPE9 Link State Database."
REFERENCE
"The Opaque LSA Option, Section 5.0 Management Considerations"
::= { fsMIOspfOpaqueLSAGroup 3 }
fsMIOspfType9LsdbEntry OBJECT-TYPE
SYNTAX FsMIOspfType9LsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Type 9 Link State Advertisement."
INDEX {fsMIStdOspfContextId, fsMIOspfType9LsdbIfIpAddress,
fsMIOspfType9LsdbOpaqueType,fsMIOspfType9LsdbLsid,
fsMIOspfType9LsdbRouterId }
::= { fsMIOspfType9LsdbTable 1 }
FsMIOspfType9LsdbEntry ::= SEQUENCE {
fsMIOspfType9LsdbIfIpAddress IpAddress,
fsMIOspfType9LsdbOpaqueType Integer32,
fsMIOspfType9LsdbLsid IpAddress,
fsMIOspfType9LsdbRouterId RouterID,
fsMIOspfType9LsdbSequence Integer32,
fsMIOspfType9LsdbAge Integer32,
fsMIOspfType9LsdbChecksum Integer32,
fsMIOspfType9LsdbAdvertisement OCTET STRING
}
fsMIOspfType9LsdbIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this OSPF interface."
::= { fsMIOspfType9LsdbEntry 1 }
fsMIOspfType9LsdbOpaqueType OBJECT-TYPE
SYNTAX Integer32 (1..11)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Opaque type of the LSA."
REFERENCE
"The Opaque LSA Option ,Section A.3 The Opaque LSA"
::= { fsMIOspfType9LsdbEntry 2 }
fsMIOspfType9LsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing the Opaque Type and Opaque ID."
REFERENCE
"The OpaqueLSA Option ,Appendix A.2 The Opaque LSA"
::= { fsMIOspfType9LsdbEntry 3 }
fsMIOspfType9LsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType9LsdbEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
fsMIOspfType9LsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType9LsdbEntry 5 }
fsMIOspfType9LsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType9LsdbEntry 6 }
fsMIOspfType9LsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType9LsdbEntry 7 }
fsMIOspfType9LsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire TYPE9 Opaque Link State Advertisement,
including its header."
REFERENCE
"The Opaque LSA Option,Appendix A.2 The Opaque LSA"
::= { fsMIOspfType9LsdbEntry 8 }
-- OSPF TYPE 11 Opaque Link State Database
-- The Link State Database contains the Type 11Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
-- This table is identical to the OSPF LSDB Table in
-- format, but contains only Type11 Link State Advertisements.
-- The purpose is to allow Type11 LSAs to be displayed
-- once for the router rather than once in each non-stub area.
fsMIOspfType11LsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfType11LsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's TYPE11 Links State Database."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfOpaqueLSAGroup 4 }
fsMIOspfType11LsdbEntry OBJECT-TYPE
SYNTAX FsMIOspfType11LsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single TYPE11 Opaque Link State Advertisement."
INDEX {fsMIStdOspfContextId, fsMIOspfType11LsdbOpaqueType, fsMIOspfType11LsdbLsid, fsMIOspfType11LsdbRouterId }
::= { fsMIOspfType11LsdbTable 1 }
FsMIOspfType11LsdbEntry ::= SEQUENCE {
fsMIOspfType11LsdbOpaqueType Integer32,
fsMIOspfType11LsdbLsid IpAddress,
fsMIOspfType11LsdbRouterId RouterID,
fsMIOspfType11LsdbSequence Integer32,
fsMIOspfType11LsdbAge Integer32,
fsMIOspfType11LsdbChecksum Integer32,
fsMIOspfType11LsdbAdvertisement OCTET STRING
}
fsMIOspfType11LsdbOpaqueType OBJECT-TYPE
SYNTAX Integer32 (1..11)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Opaquetype of the link state advertisement."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType11LsdbEntry 1 }
fsMIOspfType11LsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID identifies the opaque type and
the opaque ID of the received Opaque LSA for an application."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType11LsdbEntry 2 }
fsMIOspfType11LsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType11LsdbEntry 3 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
fsMIOspfType11LsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType11LsdbEntry 4 }
fsMIOspfType11LsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType11LsdbEntry 5 }
fsMIOspfType11LsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType11LsdbEntry 6 }
fsMIOspfType11LsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
REFERENCE
"The Opaque LSA Option ,Section 5.0 Management Considerations"
::= { fsMIOspfType11LsdbEntry 7 }
-- Application Information Database
-- The Application Information Database contains
-- statiscal information regarding the LSAs,which it has
-- generated and received.
fsMIOspfAppInfoDbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfAppInfoDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains information related to application statistics."
::= { fsMIOspfOpaqueLSAGroup 5 }
fsMIOspfAppInfoDbEntry OBJECT-TYPE
SYNTAX FsMIOspfAppInfoDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Application's statistical Information."
INDEX {fsMIStdOspfContextId,fsMIOspfAppInfoDbAppid }
::= { fsMIOspfAppInfoDbTable 1 }
FsMIOspfAppInfoDbEntry ::= SEQUENCE {
fsMIOspfAppInfoDbAppid Integer32,
fsMIOspfAppInfoDbOpaqueType Integer32,
fsMIOspfAppInfoDbLsaTypesSupported Integer32,
fsMIOspfAppInfoDbType9Gen Counter32,
fsMIOspfAppInfoDbType9Rcvd Counter32,
fsMIOspfAppInfoDbType10Gen Counter32,
fsMIOspfAppInfoDbType10Rcvd Counter32,
fsMIOspfAppInfoDbType11Gen Counter32,
fsMIOspfAppInfoDbType11Rcvd Counter32
}
fsMIOspfAppInfoDbAppid OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Application's ID. Each Application has a
unique Appid associated with it."
::= { fsMIOspfAppInfoDbEntry 1 }
fsMIOspfAppInfoDbOpaqueType OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OpaqueType of the LSA the application can
generate or receive. Each Application can register
only for a single OpaqueType."
::= { fsMIOspfAppInfoDbEntry 2 }
fsMIOspfAppInfoDbLsaTypesSupported OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSA Types the application can generate is indicated
by a BITMASK.The BITMASK and the interpretation of the
types supported is given as below:-
BitMask TypesSupported
0 0 0 ==> No types
0 0 1 ==> Only Type9
0 1 0 ==> Only Type10
0 1 1 ==> Types 9,10
1 0 0 ==> Only Type11
1 0 1 ==> Types 9,11
1 1 0 ==> Types 10,11
1 1 1 ==> Types 9,10,11
The remaining values are left for future definition."
::= { fsMIOspfAppInfoDbEntry 3 }
fsMIOspfAppInfoDbType9Gen OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Type 9 LSAs generated by the application.
This field is invalid if the application does not
support the generation of Type9 LSAs."
::= { fsMIOspfAppInfoDbEntry 4 }
fsMIOspfAppInfoDbType9Rcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Type 9 LSAs received by the application."
::= { fsMIOspfAppInfoDbEntry 5 }
fsMIOspfAppInfoDbType10Gen OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Type 10 LSAs generated by the application.
This field is invalid if the application does not
support the generation of Type10 LSAs."
::= { fsMIOspfAppInfoDbEntry 6 }
fsMIOspfAppInfoDbType10Rcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Type 10 LSAs received by the application."
::= { fsMIOspfAppInfoDbEntry 7 }
fsMIOspfAppInfoDbType11Gen OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Type 11 LSAs generated by the application.
This field is invalid if the application does not support
the generation of Type11 LSAs."
::= { fsMIOspfAppInfoDbEntry 8 }
fsMIOspfAppInfoDbType11Rcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Type 11 LSAs received by the application."
::= { fsMIOspfAppInfoDbEntry 9 }
-- RRD OBJECT DEFINITION BEGIN
fsMIOspfRRDGroup OBJECT IDENTIFIER ::= { fsMIOspf 13 }
fsMIOspfRRDGeneralGroup OBJECT IDENTIFIER ::= { fsMIOspfRRDGroup 1}
-- OSPF RRDRoute Table.
fsMIOspfRRDRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfRRDRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Describes RRDRoute Entry "
::= { fsMIOspfRRDGeneralGroup 1 }
fsMIOspfRRDRouteEntry OBJECT-TYPE
SYNTAX FsMIOspfRRDRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Information describing the RRDRoute "
AUGMENTS { fsMIStdOspfEntry }
::= { fsMIOspfRRDRouteTable 1 }
FsMIOspfRRDRouteEntry ::= SEQUENCE {
fsMIOspfRRDStatus Status,
fsMIOspfRRDSrcProtoMaskEnable Integer32,
fsMIOspfRRDSrcProtoMaskDisable Integer32,
fsMIOspfRRDRouteMapEnable DisplayString
}
fsMIOspfRRDStatus OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object enables/disables OSPF to participate in Route
Redistribution. If set to enabled, OSPF will start advertising
the routes learned by other protocols. If set to disabled, OSPF
will stop redisbution of routes. However, OSPF will continue
updating the Common Routing Table using the queue interface."
DEFVAL { disabled }
::= { fsMIOspfRRDRouteEntry 1 }
fsMIOspfRRDSrcProtoMaskEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the bit mask of source protocols from which
routes are imported to OSPF.
Bit 1 indicates that local routes are
redistributed into OSPF. (value = 2)
Bit 2 indicates that static routes are
redistributed into OSPF. (value = 4)
Bit 7 indicates that routes from RIP are
redistributed into OSPF. (value = 128)
Bit 13 indicates that routes from BGP are
redistributed into OSPF. (value = 8192)
Bit 14 indicates that routes from ISIS Level1 are
redistributed into OSPF. (value = 16384)
Bit 15 indicates that routes from ISIS Level2 are
redistributed into OSPF. (value = 32768)
Other bits are reserved for future use."
DEFVAL { 0 }
::= { fsMIOspfRRDRouteEntry 2}
fsMIOspfRRDSrcProtoMaskDisable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the bit mask of source protocols from which
redistribution to OSPF is disabled.
Bit 1 indicates that local routes are not
redistributed into OSPF. (value = 2)
Bit 2 indicates that static routes are not
redistributed into OSPF. (value = 4)
Bit 7 indicates that routes from RIP are not
redistributed into OSPF. (value = 128)
Bit 13 indicates that routes from BGP are not
redistributed into OSPF. (value = 8192)
Bit 14 indicates that routes from ISIS Level1 are not
redistributed into OSPF. (value = 16384)
Bit 15 indicates that routes from ISIS Level2 are not
redistributed into OSPF. (value = 32768)
Other bits are reserved for future use."
DEFVAL { 57478 }
::= { fsMIOspfRRDRouteEntry 3 }
fsMIOspfRRDRouteMapEnable OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name Identifies the specified route-map
in the list of route-maps. If this Object needs to be
changed, first reset this object and then configure
the new value."
::={ fsMIOspfRRDRouteEntry 4 }
-- OSPF RRDRoute Config Table.
fsMIOspfRRDRouteConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfRRDRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM."
::= { fsMIOspfRRDGroup 2 }
fsMIOspfRRDRouteConfigEntry OBJECT-TYPE
SYNTAX FsMIOspfRRDRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configuration of single route entry."
INDEX {fsMIStdOspfContextId, fsMIOspfRRDRouteDest,fsMIOspfRRDRouteMask}
::= { fsMIOspfRRDRouteConfigTable 1 }
FsMIOspfRRDRouteConfigEntry ::= SEQUENCE {
fsMIOspfRRDRouteDest IpAddress,
fsMIOspfRRDRouteMask IpAddress,
fsMIOspfRRDRouteMetric BigMetric,
fsMIOspfRRDRouteMetricType INTEGER,
fsMIOspfRRDRouteTagType INTEGER,
fsMIOspfRRDRouteTag Unsigned32,
fsMIOspfRRDRouteStatus RowStatus
}
fsMIOspfRRDRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ip Address of the Destination route."
::= { fsMIOspfRRDRouteConfigEntry 1 }
fsMIOspfRRDRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mask of the Destination route."
::= { fsMIOspfRRDRouteConfigEntry 2 }
fsMIOspfRRDRouteMetric OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric value applied to the route before it is adv. into the
OSPF Domain."
DEFVAL { 10 }
::= { fsMIOspfRRDRouteConfigEntry 3 }
fsMIOspfRRDRouteMetricType OBJECT-TYPE
SYNTAX INTEGER {
asexttype1 (1),
asexttype2 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric Type applied to the route before it is adv. into the
OSPF Domain"
DEFVAL { asexttype2 }
::= { fsMIOspfRRDRouteConfigEntry 4 }
fsMIOspfRRDRouteTagType OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
automatic (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Tag Type MIB object describes whether Tags will be
automatically generated or will be manually configured.
If tags are manually configured , the fsMIOspfRRDRouteTag
MIB has to be set with the Tag value needed."
DEFVAL { manual }
::= { fsMIOspfRRDRouteConfigEntry 5 }
fsMIOspfRRDRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Route Tag in case the user configures a Manual option for
the tags."
DEFVAL { 0 }
::= { fsMIOspfRRDRouteConfigEntry 6 }
fsMIOspfRRDRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The variable dispalys the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative."
::= { fsMIOspfRRDRouteConfigEntry 7 }
fsMIOspfRRDMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfRRDMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM."
::= { fsMIOspfRRDGroup 3 }
fsMIOspfRRDMerticEntry OBJECT-TYPE
SYNTAX FsMIOspfRRDMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configuration of single route entry."
INDEX {fsMIStdOspfContextId, fsMIOspfRRDProtocolId}
::= { fsMIOspfRRDMetricTable 1 }
FsMIOspfRRDMetricEntry ::= SEQUENCE {
fsMIOspfRRDProtocolId INTEGER,
fsMIOspfRRDMetricValue Integer32,
fsMIOspfRRDMetricType INTEGER
}
fsMIOspfRRDProtocolId OBJECT-TYPE
SYNTAX INTEGER
{
bgp(1),
rip(2),
connected(3),
static(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol Id for which the Metric value needs to be changed by the User."
::= { fsMIOspfRRDMerticEntry 1 }
fsMIOspfRRDMetricValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric value to be considered instead of the value given by RTM
for the protocol specified. If the value not secified by the user,
default metric value is considered."
::= { fsMIOspfRRDMerticEntry 2 }
fsMIOspfRRDMetricType OBJECT-TYPE
SYNTAX INTEGER
{
type1External(1),
type2External(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Metric Type to be set for the imported routes."
DEFVAL { type2External }
::= { fsMIOspfRRDMerticEntry 3 }
-- RRD OBJECT DEFINITION END
-- Future OSPF Virtual Neighbor Table
fsMIOspfVirtNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfVirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 15 Virtual Links"
::= { fsMIOspf 14 }
fsMIOspfVirtNbrEntry OBJECT-TYPE
SYNTAX FsMIOspfVirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual neighbor information."
AUGMENTS { fsMIStdOspfVirtNbrEntry }
::= { fsMIOspfVirtNbrTable 1 }
FsMIOspfVirtNbrEntry ::=
SEQUENCE {
fsMIOspfVirtNbrRestartHelperStatus
INTEGER,
fsMIOspfVirtNbrRestartHelperAge
Unsigned32,
fsMIOspfVirtNbrRestartHelperExitReason
INTEGER
}
fsMIOspfVirtNbrRestartHelperStatus OBJECT-TYPE
SYNTAX INTEGER {
notHelping (1),
helping (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the router is acting
as a graceful restart helper for the neighbor."
::= { fsMIOspfVirtNbrEntry 1 }
fsMIOspfVirtNbrRestartHelperAge OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF graceful restart
interval, if the router is acting as a restart
helper for the neighbor."
::= { fsMIOspfVirtNbrEntry 2 }
fsMIOspfVirtNbrRestartHelperExitReason OBJECT-TYPE
SYNTAX INTEGER { none (1), -- not attempted
inProgress (2), -- restart in progress
completed (3), -- successfully completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to topology
-- change.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Describes the outcome of the last attempt at acting
as a graceful restart helper for the neighbor."
::= { fsMIOspfVirtNbrEntry 3 }
-- Future OSPF virtual neighbor table ends
-- FILTERING OBJECT DEFINITION BEGIN
fsMIospfDistInOutRouteMap OBJECT IDENTIFIER ::= { fsMIOspf 15 }
fsMIOspfDistInOutRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfDistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the configuration of filtering for route map."
::= { fsMIospfDistInOutRouteMap 1 }
fsMIOspfDistInOutRouteMapEntry OBJECT-TYPE
SYNTAX FsMIOspfDistInOutRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the filtering configuration of single entry."
INDEX {fsMIStdOspfContextId, fsMIOspfDistInOutRouteMapName, fsMIOspfDistInOutRouteMapType}
::= { fsMIOspfDistInOutRouteMapTable 1 }
FsMIOspfDistInOutRouteMapEntry ::= SEQUENCE {
fsMIOspfDistInOutRouteMapName DisplayString,
fsMIOspfDistInOutRouteMapType Integer32,
fsMIOspfDistInOutRouteMapValue Integer32,
fsMIOspfDistInOutRouteMapRowStatus RowStatus
}
fsMIOspfDistInOutRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route map name."
::= { fsMIOspfDistInOutRouteMapEntry 1 }
fsMIOspfDistInOutRouteMapType OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out"
::= { fsMIOspfDistInOutRouteMapEntry 3 }
fsMIOspfDistInOutRouteMapValue OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance value ( this will be unused for distribute list )"
::= { fsMIOspfDistInOutRouteMapEntry 4 }
fsMIOspfDistInOutRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { fsMIOspfDistInOutRouteMapEntry 5 }
-- FILTERING OBJECT DEFINITION END
-- PREFERENCE OBJECT DEFINITION BEGIN
fsMIospfPreferenceGroup OBJECT IDENTIFIER ::= { fsMIOspf 16 }
fsMIOspfPreferenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfPreferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing preference value for route map."
::= { fsMIospfPreferenceGroup 1 }
fsMIOspfPreferenceEntry OBJECT-TYPE
SYNTAX FsMIOspfPreferenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing preference value of single entry."
INDEX { fsMIStdOspfContextId }
::= { fsMIOspfPreferenceTable 1 }
FsMIOspfPreferenceEntry ::= SEQUENCE {
fsMIOspfPreferenceValue Integer32
}
fsMIOspfPreferenceValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Preference value for OSPF routes. Use '0' to set default value"
DEFVAL { 0 }
::= { fsMIOspfPreferenceEntry 1 }
-- PREFERENCE OBJECT DEFINITION END
-- OSPF Interface Authentication Table
fsMIOspfIfAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfIfAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Authentication Table describes the parameters
required for the cryptographic Authentication."
REFERENCE
"OSPF Version 2, Appendix D.3 Cryptographic Authentication"
::= { fsMIOspf 17 }
fsMIOspfIfAuthEntry OBJECT-TYPE
SYNTAX FsMIOspfIfAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Auththentication Entry describes one
Authentication Key from the viewpoint of OSPF."
INDEX {fsMIStdOspfContextId, fsMIOspfIfAuthIpAddress, fsMIOspfIfAuthAddressLessIf,
fsMIOspfIfAuthKeyId }
::= { fsMIOspfIfAuthTable 1 }
FsMIOspfIfAuthEntry ::= SEQUENCE {
fsMIOspfIfAuthIpAddress IpAddress,
fsMIOspfIfAuthAddressLessIf Integer32,
fsMIOspfIfAuthKeyId Integer32,
fsMIOspfIfAuthKey OCTET STRING,
fsMIOspfIfAuthKeyStartAccept DateAndTime,
fsMIOspfIfAuthKeyStartGenerate DateAndTime,
fsMIOspfIfAuthKeyStopGenerate DateAndTime,
fsMIOspfIfAuthKeyStopAccept DateAndTime,
fsMIOspfIfAuthKeyStatus INTEGER
}
fsMIOspfIfAuthIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this OSPF interface."
::= { fsMIOspfIfAuthEntry 1 }
fsMIOspfIfAuthAddressLessIf OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address."
::= { fsMIOspfIfAuthEntry 2 }
fsMIOspfIfAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object identifies the secret key used to create the
message digest appended to the OSPF packet."
::= { fsMIOspfIfAuthEntry 3 }
fsMIOspfIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16)) -- Already existing Max Key size is carried over for all the Algorithms.
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the secret key which is used to create the
message digest appended to the OSPF packet."
::= { fsMIOspfIfAuthEntry 4 }
fsMIOspfIfAuthKeyStartAccept OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will start accepting packets that have
been created with this key.
By default, this value is set to 2000-01-01,00:00
For example, Tuesday May 26, 2022 at 1:30:15 PM should be
configured as 2022-5-26,13:30:15"
::= { fsMIOspfIfAuthEntry 5 }
fsMIOspfIfAuthKeyStartGenerate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will start using this key for packets
generation.
By default, this value is set to 2000-01-01,00:00
For example, Tuesday May 26, 2022 at 1:30:15 PM should be
configured as 2022-5-26,13:30:15"
::= { fsMIOspfIfAuthEntry 6 }
fsMIOspfIfAuthKeyStopGenerate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will stop using this key for packets
generation.
By default, this value is set to 2100-01-01,00:00
For example, Tuesday May 26, 2022 at 1:30:15 PM should be
configured as 2022-5-26,13:30:15"
::= { fsMIOspfIfAuthEntry 7 }
fsMIOspfIfAuthKeyStopAccept OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will stop accepting packets that have
been created with this key.
By default, this value is set to 2100-01-01,00:00
For example, Tuesday May 26, 2022 at 1:30:15 PM should be
configured as 2022-5-26,13:30:15"
::= { fsMIOspfIfAuthEntry 8 }
fsMIOspfIfAuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Identifies the status of the key.
NOTE:invalid (2) currently not supported"
::= { fsMIOspfIfAuthEntry 9 }
-- OSPF Virtual Interface Authentication Table
fsMIOspfVirtIfAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIOspfVirtIfAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Authentication Table describes the parameters
required for cryptographic Authentication."
REFERENCE
"OSPF Version 2, Appendix D.3 Cryptographic Authentication"
::= { fsMIOspf 18 }
fsMIOspfVirtIfAuthEntry OBJECT-TYPE
SYNTAX FsMIOspfVirtIfAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Interface Auththentication Entry describes one
Authentication Key from the viewpoint of OSPF."
INDEX {fsMIStdOspfContextId,fsMIOspfVirtIfAuthAreaId,fsMIOspfVirtIfAuthNeighbor,
fsMIOspfVirtIfAuthKeyId}
::= { fsMIOspfVirtIfAuthTable 1 }
FsMIOspfVirtIfAuthEntry ::= SEQUENCE {
fsMIOspfVirtIfAuthAreaId AreaID,
fsMIOspfVirtIfAuthNeighbor RouterID,
fsMIOspfVirtIfAuthKeyId Integer32,
fsMIOspfVirtIfAuthKey OCTET STRING,
fsMIOspfVirtIfAuthKeyStartAccept DateAndTime,
fsMIOspfVirtIfAuthKeyStartGenerate DateAndTime,
fsMIOspfVirtIfAuthKeyStopGenerate DateAndTime,
fsMIOspfVirtIfAuthKeyStopAccept DateAndTime,
fsMIOspfVirtIfAuthKeyStatus INTEGER
}
fsMIOspfVirtIfAuthAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The Transit Area that the Virtual Link
traverses. By definition, this should not be 0.0.0.0."
::= { fsMIOspfVirtIfAuthEntry 1 }
fsMIOspfVirtIfAuthNeighbor OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The Router ID of the Virtual Neighbor."
::= { fsMIOspfVirtIfAuthEntry 2 }
fsMIOspfVirtIfAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This object identifies the secret key used to create the
message digest appended to the OSPF packet."
::= { fsMIOspfVirtIfAuthEntry 3 }
fsMIOspfVirtIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16)) -- Already existing Max Key size is carried over for all the Algorithms.
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the secret key which is used to create the
message digest appended to the OSPF packet."
::= { fsMIOspfVirtIfAuthEntry 4 }
fsMIOspfVirtIfAuthKeyStartAccept OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will start accepting packets that have
been created with this key.
By default, this value is set to 2000-01-01,00:00
For example, Tuesday May 26, 2022 at 1:30:15 PM should be
configured as 2022-5-26,13:30:15"
::= { fsMIOspfVirtIfAuthEntry 5 }
fsMIOspfVirtIfAuthKeyStartGenerate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will start using this key for packets
generation.
By default, this value is set to 2000-01-01,00:00
For example, Tuesday May 26, 2022 at 1:30:15 PM should be
configured as 2022-5-26,13:30:15"
::= { fsMIOspfVirtIfAuthEntry 6 }
fsMIOspfVirtIfAuthKeyStopGenerate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will stop using this key for packets
generation.
By default, this value is set to 2100-01-01,00:00
For example, Tuesday May 26, 2022 at 1:30:15 PM should be
configured as 2022-5-26,13:30:15"
::= { fsMIOspfVirtIfAuthEntry 7 }
fsMIOspfVirtIfAuthKeyStopAccept OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time the router will stop accepting packets that have
been created with this key.
By default, this value is set to 2100-01-01,00:00
For example, Tuesday May 26, 2022 at 1:30:15 PM should be
configured as 2022-5-26,13:30:15"
::= { fsMIOspfVirtIfAuthEntry 8 }
fsMIOspfVirtIfAuthKeyStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), delete(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Identifies the status of the key.
NOTE: invalid (2) is currently not supported"
::= { fsMIOspfVirtIfAuthEntry 9 }
-- Trap Notification types for Graceful restart
fsMIOspfTraps OBJECT IDENTIFIER ::= { fsMIOspfNotification 0 }
fsMIOspfRestartStatusChange NOTIFICATION-TYPE
OBJECTS {
fsMIStdOspfRouterId, -- The originator of the trap
fsMIOspfRestartStatus,
fsMIOspfRestartInterval,
fsMIOspfRestartExitReason
}
STATUS current
DESCRIPTION
"An fsMIOspfRestartStatusChange trap signifies that
there has been a change in the graceful restart
state for the router. This trap should be
generated when the router restart status
changes."
::= { fsMIOspfTraps 1 }
fsMIOspfNbrRestartHelperStatusChange NOTIFICATION-TYPE
OBJECTS {
fsMIStdOspfRouterId, -- The originator of the trap
fsMIStdOspfNbrRtrId,
fsMIOspfNbrRestartHelperStatus,
fsMIOspfNbrRestartHelperAge,
fsMIOspfNbrRestartHelperExitReason
}
STATUS current
DESCRIPTION
"An fsMIOspfNbrRestartHelperStatusChange trap signifies that
there has been a change in the graceful restart
helper state for the neighbor. This trap should be
generated when the neighbor restart helper status
transitions for a neighbor."
::= { fsMIOspfTraps 2 }
fsMIOspfVirtNbrRestartHelperStatusChange NOTIFICATION-TYPE
OBJECTS {
fsMIStdOspfRouterId, -- The originator of the trap
fsMIOspfVirtNbrRestartHelperStatus,
fsMIOspfVirtNbrRestartHelperAge,
fsMIOspfVirtNbrRestartHelperExitReason
}
STATUS current
DESCRIPTION
"An fsMIOspfVirtNbrRestartHelperStatusChange trap signifies
that there has been a change in the graceful restart
helper state for the virtual neighbor. This trap should
be generated when the virtual neighbor restart helper
status transitions for a virtual neighbor."
::= { fsMIOspfTraps 3 }
fsMIOspfHotStandbyEventTrap NOTIFICATION-TYPE
OBJECTS {
fsMIStdOspfRouterId, -- The originator of the trap
fsMIOspfHotStandbyState,
fsMIOspfDynamicBulkUpdStatus
}
STATUS current
DESCRIPTION "
A notification is sent to the management entity whenever
there is a state change in the OSPF hotstandby Module."
::= {fsMIOspfTraps 4}
END
View Git Blame Copy Permalink