1262 lines
39 KiB
Plaintext
1262 lines
39 KiB
Plaintext
-- Copyright (C) 2010-2012 Aricent Group . All Rights Reserved
|
|
|
|
-- /*****************************************************************
|
|
-- * *
|
|
-- * $Id: fsmsdp.mib,v 1.5 2012/09/07 09:52:05 siva Exp $ */
|
|
-- * fsmsdp.mib *
|
|
-- * *
|
|
-- * MSDP Proprietary MIB. This mib is derived from *
|
|
-- * standard MSDP mib (rfc 4624). This mib is common for MSDP *
|
|
-- * IPv6 and IPv4. *
|
|
-- * *
|
|
-- ****************************************************************/
|
|
-- MSDP Proprietary MIB
|
|
|
|
ARICENT-MSDP-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
OBJECT-TYPE, Counter32, Integer32, IpAddress,
|
|
enterprises, TimeTicks ,NOTIFICATION-TYPE,
|
|
Gauge32, MODULE-IDENTITY FROM SNMPv2-SMI
|
|
InetAddress, InetAddressType FROM INET-ADDRESS-MIB
|
|
RowStatus, TimeStamp,
|
|
DisplayString FROM SNMPv2-TC;
|
|
|
|
fsMsdpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
|
CONTACT-INFO "support@aricent.com"
|
|
DESCRIPTION "The MIB module for management of MSDP Routers of
|
|
Initial Version"
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION "The MIB module for management of MSDP Routers of
|
|
Initial Version"
|
|
::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 61 }
|
|
|
|
fsMsdp OBJECT IDENTIFIER ::= { fsMsdpMIB 1 }
|
|
fsMsdpStat OBJECT IDENTIFIER ::= { fsMsdpMIB 2 }
|
|
|
|
fsMsdpTraceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is used to enable Trace Statements in MSDP Module.
|
|
A four byte integer value is specified for enabling the level
|
|
of tracing.Each Bit in the four byte integer variable represents
|
|
a level of Trace. The bits represents the levels as
|
|
follows:
|
|
0 - Trace Disable,
|
|
1 - Management,
|
|
2 - Entry trace,
|
|
3 - Exit trace,
|
|
4 - Failure trace,
|
|
5 - All resources except buffer,
|
|
6 - Buffer,
|
|
7 - Input module trace,
|
|
8 - Output module trace,
|
|
9 - Peer module trace,
|
|
10 - cache module trace
|
|
The remaining bits are unused. The combination of levels are also allowed.
|
|
For example if the bits 1 and 2 are set, then the Trace
|
|
statements related to management and Data Path will be printed.
|
|
The administrator have to enter the corresponding integer value
|
|
for the bits set. For example if bits 1 and 2 are set then
|
|
admin has to give the value 6."
|
|
|
|
DEFVAL { 0 }
|
|
|
|
::= { fsMsdp 1 }
|
|
|
|
fsMsdpIPv4AdminStat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (0),
|
|
enabled (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of IPv4 MSDP on this MSDP speaker- globally enabled
|
|
or disabled. By default MSDP for IPv4 is disabled"
|
|
|
|
DEFVAL { 0 }
|
|
|
|
::= { fsMsdp 2 }
|
|
|
|
fsMsdpIPv6AdminStat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (0),
|
|
enabled (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of IPv6 MSDP on this MSDP speaker - globally enabled
|
|
or disabled. By default MSDP for IPv6 is disabled"
|
|
|
|
DEFVAL { 0 }
|
|
|
|
::= { fsMsdp 3 }
|
|
|
|
fsMsdpCacheLifetime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lifetime given to SA cache entries when created or
|
|
refreshed. This is the [SG-State-Period] in the MSDP
|
|
spec. A value of 0 means no SA caching is done by this
|
|
MSDP speaker.
|
|
|
|
This object does not measure time per se; instead, it
|
|
is the delta from the time at which an SA message is
|
|
received at which it should be expired if not refreshed.
|
|
(i.e., it is the value of fsMsdpSACacheExpiryTime
|
|
immediately after receiving an SA message applying to
|
|
that row.) As such, TimeInterval would be a more
|
|
appropriate SYNTAX; it remains TimeTicks for backwards
|
|
compatibility."
|
|
|
|
REFERENCE "RFC 3618 section 5.3"
|
|
|
|
DEFVAL { 0 }
|
|
|
|
::= { fsMsdp 4 }
|
|
|
|
fsMsdpNumSACacheEntries OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of entries in the SA Cache table of MSDP."
|
|
|
|
::= { fsMsdp 5 }
|
|
|
|
|
|
fsMsdpMaxPeerSessions OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It defines the Maximum number of MSDP Peer sessions (TCP sessions)
|
|
that would be allowed simultaneously."
|
|
DEFVAL { 32 }
|
|
|
|
::= { fsMsdp 6 }
|
|
|
|
fsMsdpMappingComponentId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It indicates the MRP(PIM) component on which the MSDP should work.
|
|
ie. Whenever the (*,G) Join is received in the
|
|
configured PIM compoment and MSDP is enabled, SA cache entry will be
|
|
searched in MSDP to get the Source Address"
|
|
|
|
DEFVAL { 1 }
|
|
|
|
::= { fsMsdp 7 }
|
|
|
|
fsMsdpListenerPort OBJECT-TYPE
|
|
SYNTAX Integer32 (639 |1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MSDP listens on this port for the TCP connection between
|
|
the remote peers. This port change will be effective for the
|
|
forthcoming connections, however the old Peers with old TCP
|
|
Port will be supported till the Peer goes down"
|
|
|
|
DEFVAL { 639 }
|
|
::= { fsMsdp 8 }
|
|
|
|
fsMsdpPeerFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
acceptall (1),
|
|
denyall (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the status of peer filter globally configured. This can
|
|
be Accept all peers or Deny all Peers. If the status is acceptall,
|
|
all the Peer connections are accepted if no route map is configured
|
|
in PEER FILTER TABLE. If the routemap is configured, the action taken
|
|
based on the routemap rule."
|
|
|
|
DEFVAL { 1 }
|
|
|
|
::= { fsMsdp 9 }
|
|
|
|
fsMsdpPeerCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the number of configured Peers."
|
|
|
|
::= { fsMsdp 10 }
|
|
|
|
fsMsdpStatEstPeerCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the number of established Peers."
|
|
|
|
::= { fsMsdpStat 1 }
|
|
|
|
------------
|
|
-- SCALAR_TABLE_END fsMsdp
|
|
------------
|
|
--
|
|
-- The MSDP Peer table
|
|
--
|
|
|
|
fsMsdpPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMsdpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the MSDP speaker's peers. This table
|
|
is common for IPv4 and IPv6 Peers"
|
|
::= { fsMsdp 11 }
|
|
|
|
fsMsdpPeerEntry OBJECT-TYPE
|
|
SYNTAX FsMsdpPeerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing an MSDP peer."
|
|
|
|
INDEX { fsMsdpPeerAddrType, fsMsdpPeerRemoteAddress }
|
|
::= { fsMsdpPeerTable 1 }
|
|
|
|
FsMsdpPeerEntry ::= SEQUENCE {
|
|
fsMsdpPeerAddrType InetAddressType,
|
|
fsMsdpPeerRemoteAddress InetAddress,
|
|
fsMsdpPeerState INTEGER,
|
|
fsMsdpPeerRPFFailures Counter32,
|
|
fsMsdpPeerInSAs Counter32,
|
|
fsMsdpPeerOutSAs Counter32,
|
|
fsMsdpPeerInSARequests Counter32,
|
|
fsMsdpPeerOutSARequests Counter32,
|
|
fsMsdpPeerInControlMessages Counter32,
|
|
fsMsdpPeerOutControlMessages Counter32,
|
|
fsMsdpPeerInDataPackets Counter32,
|
|
fsMsdpPeerOutDataPackets Counter32,
|
|
fsMsdpPeerFsmEstablishedTransitions Counter32,
|
|
fsMsdpPeerFsmEstablishedTime TimeStamp,
|
|
fsMsdpPeerInMessageTime TimeStamp,
|
|
fsMsdpPeerLocalAddress InetAddress,
|
|
fsMsdpPeerConnectRetryInterval Integer32,
|
|
fsMsdpPeerHoldTimeConfigured Integer32,
|
|
fsMsdpPeerKeepAliveConfigured Integer32,
|
|
fsMsdpPeerDataTtl Integer32,
|
|
fsMsdpPeerStatus RowStatus,
|
|
fsMsdpPeerRemotePort Integer32,
|
|
fsMsdpPeerLocalPort Integer32,
|
|
fsMsdpPeerEncapsulationType INTEGER,
|
|
fsMsdpPeerConnectionAttempts Counter32,
|
|
fsMsdpPeerDiscontinuityTime TimeStamp,
|
|
fsMsdpPeerMD5AuthPassword DisplayString,
|
|
fsMsdpPeerMD5AuthPwdStat INTEGER,
|
|
fsMsdpPeerMD5FailCount Integer32,
|
|
fsMsdpPeerMD5SuccessCount Integer32,
|
|
fsMsdpPeerInSAResponses Counter32,
|
|
fsMsdpPeerOutSAResponses Counter32,
|
|
fsMsdpPeerUpTime TimeTicks,
|
|
fsMsdpPeerInKeepAliveCount Counter32,
|
|
fsMsdpPeerOutKeepAliveCount Counter32,
|
|
fsMsdpPeerDataTtlErrorCount Counter32,
|
|
fsMsdpPeerAdminStatus INTEGER
|
|
}
|
|
fsMsdpPeerAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type for which this entry
|
|
contains information."
|
|
::= { fsMsdpPeerEntry 1 }
|
|
|
|
|
|
fsMsdpPeerRemoteAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the remote MSDP peer."
|
|
::= { fsMsdpPeerEntry 2 }
|
|
|
|
|
|
fsMsdpPeerState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
listen(2),
|
|
connecting(3),
|
|
established(4),
|
|
disabled(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the MSDP TCP connection with this peer."
|
|
::= { fsMsdpPeerEntry 3 }
|
|
|
|
fsMsdpPeerRPFFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of SA messages received from this peer that
|
|
failed the Peer-RPF check.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 4 }
|
|
|
|
fsMsdpPeerInSAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP SA messages received on this
|
|
connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 5 }
|
|
|
|
fsMsdpPeerOutSAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP SA messages transmitted on this
|
|
connection.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 6 }
|
|
|
|
fsMsdpPeerInSARequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP SA-Request messages received on this
|
|
connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 7 }
|
|
|
|
fsMsdpPeerOutSARequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP SA-Request messages transmitted on
|
|
this connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 8 }
|
|
|
|
fsMsdpPeerInControlMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of MSDP messages, excluding encapsulated
|
|
data packets, received on this TCP connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 9 }
|
|
|
|
fsMsdpPeerOutControlMessages OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of MSDP messages, excluding encapsulated
|
|
data packets, transmitted on this TCP connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 10 }
|
|
|
|
fsMsdpPeerInDataPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of encapsulated data packets received
|
|
from this peer.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 11 }
|
|
|
|
fsMsdpPeerOutDataPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of encapsulated data packets sent to
|
|
this peer.
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 12 }
|
|
|
|
fsMsdpPeerFsmEstablishedTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times the MSDP FSM transitioned into
|
|
the ESTABLISHED state."
|
|
REFERENCE "RFC 3618 section 11"
|
|
::= { fsMsdpPeerEntry 13 }
|
|
|
|
fsMsdpPeerFsmEstablishedTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This timestamp is set to the value of sysUpTime when a
|
|
peer transitions into or out of the ESTABLISHED state.
|
|
It is set to zero when the MSDP speaker is booted."
|
|
REFERENCE "RFC 3618 section 11"
|
|
::= { fsMsdpPeerEntry 14 }
|
|
|
|
fsMsdpPeerInMessageTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sysUpTime value when the last MSDP message was
|
|
received from the peer. It is set to zero when the MSDP
|
|
speaker is booted."
|
|
::= { fsMsdpPeerEntry 15 }
|
|
|
|
fsMsdpPeerLocalAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local IP address used for this entry's MSDP TCP
|
|
connection."
|
|
::= { fsMsdpPeerEntry 16 }
|
|
|
|
fsMsdpPeerConnectRetryInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval, in seconds, for the [ConnectRetry-period]
|
|
for this peer."
|
|
REFERENCE "RFC 3618 section 5.6"
|
|
DEFVAL { 30 }
|
|
::= { fsMsdpPeerEntry 17 }
|
|
|
|
fsMsdpPeerHoldTimeConfigured OBJECT-TYPE
|
|
SYNTAX Integer32 (0|3..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval, in seconds, for the [HoldTime-Period]
|
|
configured for this MSDP speaker with this peer. If the
|
|
value of this object is zero (0), the MSDP connection is
|
|
never torn down due to the absence of messages from the
|
|
peer."
|
|
REFERENCE "RFC 3618 section 5.4"
|
|
DEFVAL { 75 }
|
|
::= { fsMsdpPeerEntry 18 }
|
|
|
|
fsMsdpPeerKeepAliveConfigured OBJECT-TYPE
|
|
SYNTAX Integer32 (0|1..21845)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time interval, in seconds, for the [KeepAlive-Period]
|
|
configured for this MSDP speaker with this peer. If the
|
|
value of this object is zero (0), no periodic KEEPALIVE
|
|
messages are sent to the peer after the MSDP connection
|
|
has been established."
|
|
REFERENCE "RFC 3618 section 5.5"
|
|
DEFVAL { 60 }
|
|
::= { fsMsdpPeerEntry 19 }
|
|
|
|
fsMsdpPeerDataTtl OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum TTL a packet is required to have before it
|
|
may be forwarded using SA encapsulation to this peer."
|
|
DEFVAL { 1 }
|
|
::= { fsMsdpPeerEntry 20 }
|
|
|
|
|
|
fsMsdpPeerStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RowStatus object by which peers can be added and
|
|
deleted. A transition to 'active' will cause the MSDP
|
|
'Enable MSDP peering with P' Event to be generated. A
|
|
transition out of the 'active' state will cause the MSDP
|
|
'Disable MSDP peering with P' Event to be generated.
|
|
Care should be used in providing write access to this
|
|
object without adequate authentication.
|
|
|
|
fsMsdpPeerRemoteAddress is the only variable that must be
|
|
set to a valid value before the row can be activated.
|
|
Since this is the table's INDEX, a row can be activated
|
|
by simply setting the fsMsdpPeerStatus variable.
|
|
|
|
It is possible to modify other columns in the same
|
|
conceptual row when the status value is active(1)."
|
|
REFERENCE "RFC 3618 section 11.1"
|
|
::= { fsMsdpPeerEntry 21 }
|
|
|
|
fsMsdpPeerRemotePort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote port for the TCP connection between the MSDP
|
|
peers."
|
|
DEFVAL { 639 }
|
|
::= { fsMsdpPeerEntry 22 }
|
|
|
|
fsMsdpPeerLocalPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local port for the TCP connection between the MSDP
|
|
peers."
|
|
DEFVAL { 639 }
|
|
::= { fsMsdpPeerEntry 23 }
|
|
|
|
fsMsdpPeerEncapsulationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
tcp(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"The encapsulation in use when encapsulating data in SA
|
|
messages to this peer."
|
|
::= { fsMsdpPeerEntry 24 }
|
|
|
|
fsMsdpPeerConnectionAttempts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the state machine has transitioned
|
|
from INACTIVE to CONNECTING."
|
|
::= { fsMsdpPeerEntry 25 }
|
|
|
|
|
|
fsMsdpPeerDiscontinuityTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime on the most recent occasion at
|
|
which one or more of this entry's counters suffered a
|
|
discontinuity. See the DESCRIPTION of each object to see
|
|
if it is expected to have discontinuities. These
|
|
discontinuities may occur at peer connection
|
|
establishment.
|
|
|
|
If no such discontinuities have occurred since the last
|
|
reinitialization of the local management subsystem, then
|
|
this object contains a zero value."
|
|
::= { fsMsdpPeerEntry 26 }
|
|
|
|
fsMsdpPeerMD5AuthPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..80))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP MD5 Authentication Password that has to be sent with all TCP
|
|
packets originated from the peer."
|
|
::= { fsMsdpPeerEntry 27 }
|
|
|
|
fsMsdpPeerMD5AuthPwdStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled (0),
|
|
enabled (1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object indicates whether TCP MD5 password needs to be enabled/disabled
|
|
for the peer."
|
|
DEFVAL { disabled }
|
|
|
|
::= { fsMsdpPeerEntry 28 }
|
|
|
|
fsMsdpPeerMD5FailCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the number of times the MD5 authentication has failed"
|
|
|
|
::= { fsMsdpPeerEntry 29 }
|
|
|
|
fsMsdpPeerMD5SuccessCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the number of times the MD5 authentication has succeeded"
|
|
|
|
::= { fsMsdpPeerEntry 30 }
|
|
|
|
fsMsdpPeerInSAResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP SA-Response messages received on
|
|
this connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 31 }
|
|
|
|
fsMsdpPeerOutSAResponses OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP SA-Response messages transmitted on
|
|
this connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 32 }
|
|
|
|
fsMsdpPeerUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since this entry was first placed in the Peer
|
|
Table.
|
|
|
|
The first epoch is the time that the entry was first
|
|
placed in the Peer table, and the second epoch is the
|
|
current time."
|
|
::= { fsMsdpPeerEntry 33 }
|
|
|
|
fsMsdpPeerInKeepAliveCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP KeepAlive messages received on
|
|
this connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 34 }
|
|
|
|
fsMsdpPeerOutKeepAliveCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP KeepAlive messages transmitted on
|
|
this connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 35 }
|
|
|
|
fsMsdpPeerDataTtlErrorCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP data Packets dropped as received TTL is invalid
|
|
for this connection.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other
|
|
times as indicated by the value of
|
|
fsMsdpPeerDiscontinuityTime."
|
|
::= { fsMsdpPeerEntry 36 }
|
|
|
|
|
|
fsMsdpPeerAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
established(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The is the admin state of the MSDP peer."
|
|
::= { fsMsdpPeerEntry 37 }
|
|
|
|
--
|
|
-- The MSDP Source-Active Cache table
|
|
--
|
|
|
|
fsMsdpSACacheTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMsdpSACacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the MSDP SA advertisements
|
|
currently in the MSDP speaker's cache."
|
|
::= { fsMsdp 12 }
|
|
|
|
fsMsdpSACacheEntry OBJECT-TYPE
|
|
SYNTAX FsMsdpSACacheEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing an MSDP SA
|
|
advertisement. The Index to this table includes
|
|
fsMsdpSACacheOriginRP for diagnosing incorrect MSDP
|
|
advertisements; normally, a Group and Source pair would
|
|
be unique. Row creation is not permitted;
|
|
fsMsdpSACacheStatus may only be used to delete rows
|
|
from this table."
|
|
|
|
INDEX { fsMsdpSACacheAddrType,fsMsdpSACacheGroupAddr,
|
|
fsMsdpSACacheSourceAddr,fsMsdpSACacheOriginRP }
|
|
::= { fsMsdpSACacheTable 1 }
|
|
|
|
FsMsdpSACacheEntry ::= SEQUENCE {
|
|
fsMsdpSACacheAddrType InetAddressType,
|
|
fsMsdpSACacheGroupAddr InetAddress,
|
|
fsMsdpSACacheSourceAddr InetAddress,
|
|
fsMsdpSACacheOriginRP InetAddress,
|
|
fsMsdpSACachePeerLearnedFrom InetAddress,
|
|
fsMsdpSACacheRPFPeer InetAddress,
|
|
fsMsdpSACacheInSAs Counter32,
|
|
fsMsdpSACacheInDataPackets Counter32,
|
|
fsMsdpSACacheUpTime TimeTicks,
|
|
fsMsdpSACacheExpiryTime TimeTicks,
|
|
fsMsdpSACacheStatus RowStatus
|
|
}
|
|
|
|
fsMsdpSACacheAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type for which this entry
|
|
contains information."
|
|
::= { fsMsdpSACacheEntry 1 }
|
|
|
|
|
|
fsMsdpSACacheGroupAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast group address of the SA Cache entry."
|
|
::= { fsMsdpSACacheEntry 2 }
|
|
|
|
fsMsdpSACacheSourceAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of the SA Cache entry."
|
|
::= { fsMsdpSACacheEntry 3 }
|
|
|
|
fsMsdpSACacheOriginRP OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RP of the SA Cache entry. This field is in the index
|
|
in order to catch multiple RP's advertising the same
|
|
source and group."
|
|
::= { fsMsdpSACacheEntry 4 }
|
|
|
|
fsMsdpSACachePeerLearnedFrom OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer from which this SA Cache entry was last
|
|
accepted. This address must correspond to the
|
|
fsMsdpPeerRemoteAddress value for a row in the MSDP Peer
|
|
Table. This should be all zeros on the router that
|
|
originated the entry."
|
|
::= { fsMsdpSACacheEntry 5 }
|
|
|
|
fsMsdpSACacheRPFPeer OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer from which an SA message corresponding to this
|
|
cache entry would be accepted (i.e., the RPF peer for
|
|
fsMsdpSACacheOriginRP). This may be different than
|
|
fsMsdpSACachePeerLearnedFrom if this entry was created by
|
|
an MSDP SA-Response. This address must correspond to
|
|
the fsMsdpPeerRemoteAddress value for a row in the MSDP
|
|
Peer Table, or it may be all zeros if no RPF peer exists."
|
|
::= { fsMsdpSACacheEntry 6 }
|
|
|
|
fsMsdpSACacheInSAs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP SA messages received relevant to this
|
|
cache entry. This object must be initialized to zero
|
|
when creating a cache entry."
|
|
::= { fsMsdpSACacheEntry 7 }
|
|
|
|
|
|
fsMsdpSACacheInDataPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of MSDP-encapsulated data packets received
|
|
relevant to this cache entry. This object must be
|
|
initialized to zero when creating a cache entry."
|
|
::= { fsMsdpSACacheEntry 8 }
|
|
|
|
fsMsdpSACacheUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since this entry was first placed in the SA
|
|
cache.
|
|
|
|
The first epoch is the time that the entry was first
|
|
placed in the SA cache, and the second epoch is the
|
|
current time."
|
|
::= { fsMsdpSACacheEntry 9 }
|
|
|
|
fsMsdpSACacheExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time remaining before this entry will expire from
|
|
the SA cache.
|
|
|
|
The first epoch is now, and the second epoch is the time
|
|
that the entry will expire."
|
|
::= { fsMsdpSACacheEntry 10 }
|
|
|
|
fsMsdpSACacheStatus OBJECT-TYPE
|
|
SYNTAX RowStatus { active(1), destroy(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row in the table. The only allowable
|
|
actions are to retrieve the status, which will be 'active',
|
|
or to set the status to 'destroy' in order to remove
|
|
this entry from the cache.
|
|
Row creation is not permitted.
|
|
|
|
No columnar objects are writable, so there are none that
|
|
may be changed while the status value is active(1)."
|
|
::= { fsMsdpSACacheEntry 11 }
|
|
|
|
|
|
--
|
|
-- MSDP Mesh Group Membership table
|
|
--
|
|
|
|
fsMsdpMeshGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMsdpMeshGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing MSDP Mesh Group
|
|
configuration."
|
|
::= { fsMsdp 13 }
|
|
|
|
fsMsdpMeshGroupEntry OBJECT-TYPE
|
|
|
|
SYNTAX FsMsdpMeshGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing a peer in an MSDP
|
|
Mesh Group.
|
|
|
|
If row creation is supported, dynamically added rows are
|
|
added to the system's stable configuration
|
|
(corresponding to a StorageType value of nonVolatile)."
|
|
|
|
INDEX { fsMsdpMeshGroupName,fsMsdpMeshGroupAddrType,
|
|
fsMsdpMeshGroupPeerAddress }
|
|
::= { fsMsdpMeshGroupTable 1 }
|
|
|
|
FsMsdpMeshGroupEntry ::= SEQUENCE {
|
|
fsMsdpMeshGroupName DisplayString,
|
|
fsMsdpMeshGroupAddrType InetAddressType,
|
|
fsMsdpMeshGroupPeerAddress InetAddress,
|
|
fsMsdpMeshGroupStatus RowStatus
|
|
}
|
|
|
|
fsMsdpMeshGroupName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the mesh group."
|
|
::= { fsMsdpMeshGroupEntry 1 }
|
|
|
|
fsMsdpMeshGroupAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type for which this entry
|
|
contains information."
|
|
::= { fsMsdpMeshGroupEntry 2 }
|
|
|
|
fsMsdpMeshGroupPeerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A peer address that is a member of the mesh group with
|
|
name fsMsdpMeshGroupName. The fsMsdpMeshGroupPeerAddress
|
|
must match a row in the fsMsdpPeerTable."
|
|
::= { fsMsdpMeshGroupEntry 3 }
|
|
|
|
fsMsdpMeshGroupStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry's status, by which new entries may be added
|
|
to the table and old entries deleted.
|
|
|
|
fsMsdpMeshGroupName and fsMsdpMeshGroupPeerAddress must be
|
|
set to valid values before the row can be activated.
|
|
Since these are the table's INDEX, a row can be activated
|
|
by simply setting the fsMsdpMeshGroupStatus variable.
|
|
|
|
It is not possible to modify other columns in the same
|
|
conceptual row when the status value is active(1),
|
|
because the only other objects in the row are part
|
|
of the index. Changing one of these changes the row,
|
|
so an old row must be deleted and a new one created."
|
|
|
|
::= { fsMsdpMeshGroupEntry 4 }
|
|
|
|
--
|
|
-- MSDP RP Table
|
|
--
|
|
fsMsdpRPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMsdpRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing MSDP RP Address
|
|
configurations. This address is used MSDP SA messages
|
|
as a Initiator RP."
|
|
|
|
::= { fsMsdp 14 }
|
|
|
|
fsMsdpRPEntry OBJECT-TYPE
|
|
SYNTAX FsMsdpRPEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing the RP Address
|
|
to be used in SA messages."
|
|
|
|
INDEX { fsMsdpRPAddrType }
|
|
::= { fsMsdpRPTable 1 }
|
|
|
|
FsMsdpRPEntry ::= SEQUENCE {
|
|
fsMsdpRPAddrType InetAddressType,
|
|
fsMsdpRPAddress InetAddress,
|
|
fsMsdpRPOperStatus INTEGER,
|
|
fsMsdpRPStatus RowStatus
|
|
}
|
|
|
|
fsMsdpRPAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type for which this entry
|
|
contains information."
|
|
::= { fsMsdpRPEntry 1 }
|
|
|
|
fsMsdpRPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RP Address which will be present in the
|
|
SA message sent from this router."
|
|
::= { fsMsdpRPEntry 2 }
|
|
fsMsdpRPOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up (1),
|
|
down (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the interface oper status."
|
|
::= { fsMsdpRPEntry 3 }
|
|
|
|
fsMsdpRPStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the status of the (conceptual Row).
|
|
The only possible activity is making the row active.
|
|
This row cannot be destroyed ever."
|
|
::= { fsMsdpRPEntry 4 }
|
|
|
|
--
|
|
-- MSDP Peer Filter Table
|
|
--
|
|
fsMsdpPeerFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMsdpPeerFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing MSDP Peer filtering
|
|
configurations. The Peer connections can be accepted
|
|
or denied based on this filter configuration."
|
|
|
|
::= { fsMsdp 15 }
|
|
|
|
fsMsdpPeerFilterEntry OBJECT-TYPE
|
|
SYNTAX FsMsdpPeerFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing the filter
|
|
Accept/Reject connection) applied to an MSDP Remote peer."
|
|
|
|
INDEX { fsMsdpPeerFilterAddrType }
|
|
|
|
::= { fsMsdpPeerFilterTable 1 }
|
|
|
|
FsMsdpPeerFilterEntry ::= SEQUENCE {
|
|
fsMsdpPeerFilterAddrType InetAddressType,
|
|
fsMsdpPeerFilterRouteMap DisplayString,
|
|
fsMsdpPeerFilterStatus RowStatus
|
|
}
|
|
|
|
fsMsdpPeerFilterAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type for which this entry
|
|
contains information."
|
|
::= { fsMsdpPeerFilterEntry 1 }
|
|
|
|
fsMsdpPeerFilterRouteMap OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the route map which is to be applied for filtering the peer.
|
|
Before configuring this table, a route map with this string
|
|
should be configured with proper permissions (accept/deny)"
|
|
|
|
::= { fsMsdpPeerFilterEntry 2 }
|
|
|
|
fsMsdpPeerFilterStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the status of the configured routemap
|
|
This can be enabled or disabled. If status is enabled,
|
|
the filter will be applied for the peers
|
|
using the routemap configured, else the routemap is not used"
|
|
::= { fsMsdpPeerFilterEntry 3 }
|
|
|
|
--
|
|
-- MSDP SA Redistribution Table
|
|
--
|
|
fsMsdpSARedistributionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMsdpSARedistributionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing MSDP SA filtering
|
|
configurations. "
|
|
::= { fsMsdp 16 }
|
|
|
|
fsMsdpSARedistributionEntry OBJECT-TYPE
|
|
SYNTAX FsMsdpSARedistributionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) representing the filter
|
|
applied to either Source or Group or
|
|
any of the combinations of Source and Group for
|
|
preventing the SA message advertisement from the
|
|
originating RP."
|
|
|
|
INDEX { fsMsdpSARedistributionAddrType }
|
|
::= { fsMsdpSARedistributionTable 1 }
|
|
|
|
FsMsdpSARedistributionEntry ::= SEQUENCE {
|
|
fsMsdpSARedistributionAddrType InetAddressType,
|
|
fsMsdpSARedistributionStatus RowStatus,
|
|
fsMsdpSARedistributionRouteMap DisplayString,
|
|
fsMsdpSARedistributionRouteMapStat INTEGER
|
|
}
|
|
|
|
fsMsdpSARedistributionAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type for which this entry
|
|
contains information."
|
|
::= { fsMsdpSARedistributionEntry 1 }
|
|
|
|
fsMsdpSARedistributionStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the redistribution status of the SA messages .
|
|
|
|
If it is enabled and the value of fsMsdpSARedistributionRouteMap
|
|
is NULL, then all SA messages are redistributed by the originator.
|
|
|
|
Else if it is enabled and the value of fsMsdpSARedistributionRouteMap
|
|
is NOT NULL,then SA message redistribution is based on the
|
|
routemap fsMsdpSARedistributionRouteMap configured.
|
|
|
|
If it is disabled ,no SA messages are redistributed."
|
|
|
|
|
|
::= { fsMsdpSARedistributionEntry 2 }
|
|
|
|
fsMsdpSARedistributionRouteMap OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the route map which is to be applied for filtering
|
|
the SA messages at originating RP.
|
|
Before configuring this field, a route map with this string
|
|
should be configured with proper permissions"
|
|
|
|
::= { fsMsdpSARedistributionEntry 3 }
|
|
|
|
fsMsdpSARedistributionRouteMapStat OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disabled (0),
|
|
enabled (1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the status of the configured routemap
|
|
- enabled or disabled.
|
|
If status is enabled,the filter will be applied for the SA messages
|
|
using the routemap configured, else does nothing"
|
|
|
|
DEFVAL { 0 }
|
|
|
|
::= { fsMsdpSARedistributionEntry 4 }
|
|
|
|
----
|
|
-- Traps
|
|
----
|
|
fsMsdpRtrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The MIB object fsMsdpRtrId,is the configured Router-Id for the
|
|
router.This ID is obtained from IP module"
|
|
|
|
::= { fsMsdp 17 }
|
|
|
|
fsMsdpTraps OBJECT IDENTIFIER ::= { fsMsdp 0 }
|
|
|
|
fsMsdpEstablished NOTIFICATION-TYPE
|
|
OBJECTS { fsMsdpRtrId,
|
|
fsMsdpPeerFsmEstablishedTransitions }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MSDP Established event is generated when the MSDP FSM
|
|
enters the ESTABLISHED state."
|
|
::= { fsMsdpTraps 1 }
|
|
|
|
fsMsdpBackwardTransition NOTIFICATION-TYPE
|
|
OBJECTS { fsMsdpRtrId,
|
|
fsMsdpPeerState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MSDPBackwardTransition Event is generated when the
|
|
MSDP FSM moves from a higher-numbered state to a
|
|
lower-numbered state."
|
|
::= { fsMsdpTraps 2 }
|
|
|
|
fsMsdpRPOperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { fsMsdpRtrId,
|
|
fsMsdpRPOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fsMsdpRPOperStatus Event is generated when the MSDP
|
|
RP's Oper Status changes from one state to other."
|
|
::= { fsMsdpTraps 3 }
|
|
END
|