WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/aricent/ARICENT-MISTDOSPFV3-MIB

2623 lines
97 KiB
Plaintext
Raw Blame History

-- Copyright (C) 2009-2012 Aricent Group . All Rights Reserved
-- /*****************************************************************
-- * *
-- * $Id: fsmisos3.mib,v 1.4 2012/09/07 09:52:05 siva Exp $ *
-- * fsmisos3.mib *
-- * *
-- * OSPFv3 Proprietary MIB. *
-- * *
-- ****************************************************************/
ARICENT-MISTDOSPFV3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32,
Gauge32, Integer32, IpAddress, enterprises, Unsigned32
FROM SNMPv2-SMI
TruthValue, StorageType, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
AreaID, RouterID, Metric, BigMetric, Status,
HelloRange, DesignatedRouterPriority
FROM OSPF-MIB;
fsMIStdOspfv3 MODULE-IDENTITY
LAST-UPDATED "201209050000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO "support@aricent.com"
DESCRIPTION
"The Proprietary MI STD OSPF3 MIB modified
from STD OSPF3 MIB"
REVISION "201209050000Z"
DESCRIPTION
"The Proprietary MI STD OSPF3 MIB modified
from STD OSPF3 MIB"
::= { enterprises aricent-communication-holding-ltd (29601) iss(2) 23 }
-- Texual conventions
UpToRefreshInterval ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The values one might be able to configure for
variables bounded by the Refresh Interval"
SYNTAX Integer32 (1..1800)
RouterDeadRange ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The range of intervals in seconds that a routers hello
must have not been seen before a neighbor declares the
router down"
SYNTAX Integer32 (1..'FFFF'h)
-------------------
-- Top-level structure of MIB
fsMIStdOspfv3Objects OBJECT IDENTIFIER ::= { fsMIStdOspfv3 1 }
-- OSPF Table
-- contains information regarding various instances
-- of the router
fsMIStdOspfv3Table OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the parameters
of router's instances"
::= { fsMIStdOspfv3Objects 1 }
fsMIStdOspfv3Entry OBJECT-TYPE
SYNTAX FsMIStdOspfv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the parameters
of one of the router's instances"
INDEX { fsMIStdOspfv3ContextId }
::= { fsMIStdOspfv3Table 1 }
FsMIStdOspfv3Entry ::=
SEQUENCE {
fsMIStdOspfv3ContextId
Integer32,
fsMIStdOspfv3RouterId
RouterID,
fsMIStdOspfv3AdminStat
Status,
fsMIStdOspfv3VersionNumber
INTEGER,
fsMIStdOspfv3AreaBdrRtrStatus
TruthValue,
fsMIStdOspfv3ASBdrRtrStatus
TruthValue,
fsMIStdOspfv3AsScopeLsaCount
Gauge32,
fsMIStdOspfv3AsScopeLsaCksumSum
Integer32,
fsMIStdOspfv3OriginateNewLsas
Counter32,
fsMIStdOspfv3RxNewLsas
Counter32,
fsMIStdOspfv3ExtLsaCount
Gauge32,
fsMIStdOspfv3ExtAreaLsdbLimit
Integer32,
fsMIStdOspfv3MulticastExtensions
BITS,
fsMIStdOspfv3ExitOverflowInterval
Unsigned32,
fsMIStdOspfv3DemandExtensions
TruthValue,
fsMIStdOspfv3TrafficEngineeringSupport
TruthValue,
fsMIStdOspfv3ReferenceBandwidth
Unsigned32,
fsMIStdOspfv3RestartSupport
INTEGER,
fsMIStdOspfv3RestartInterval
UpToRefreshInterval,
fsMIStdOspfv3RestartStatus
INTEGER,
fsMIStdOspfv3RestartAge
UpToRefreshInterval,
fsMIStdOspfv3RestartExitReason
INTEGER,
fsMIStdOspfv3Status
RowStatus
}
fsMIStdOspfv3ContextId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon
system configuration. Default value is 0 which
will be initialized during bootup"
::= { fsMIStdOspfv3Entry 1 }
fsMIStdOspfv3RouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
router in the Autonomous System.
To ensure uniqueness, this may
default to the value of one of the
router's IPv4 interface addresses if IPv4 is
configured on the router."
::= { fsMIStdOspfv3Entry 2 }
fsMIStdOspfv3AdminStat OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one inter-
face; 'disabled' disables it on all inter-
faces."
::= { fsMIStdOspfv3Entry 3 }
fsMIStdOspfv3VersionNumber OBJECT-TYPE
SYNTAX INTEGER { version3(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of OSPF for IPv6 is 3."
::= { fsMIStdOspfv3Entry 4 }
fsMIStdOspfv3AreaBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag to note whether this router is an area
border router."
REFERENCE
"OSPF Version 2, Section 3 Splitting the AS into
Areas"
::= { fsMIStdOspfv3Entry 5 }
fsMIStdOspfv3ASBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A flag to note whether this router is config-
ured as an Autonomous System border router."
REFERENCE
"OSPF Version 2, Section 3.3 Classification of
routers"
::= { fsMIStdOspfv3Entry 6 }
fsMIStdOspfv3AsScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AS-Scope (e.g. AS-External) link-state
advertisements in the link-state database."
::= { fsMIStdOspfv3Entry 7 }
fsMIStdOspfv3AsScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the LS checksums of
the AS-scoped link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link-state database of two
routers."
::= { fsMIStdOspfv3Entry 8 }
fsMIStdOspfv3OriginateNewLsas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA."
::= { fsMIStdOspfv3Entry 9 }
fsMIStdOspfv3RxNewLsas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-state advertise-
ments."
::= { fsMIStdOspfv3Entry 10 }
fsMIStdOspfv3ExtLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of External(LS type 0x4005) in the link-
state database"
::= { fsMIStdOspfv3Entry 11 }
fsMIStdOspfv3ExtAreaLsdbLimit OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow-
State. The router never holds more than
ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. OspfExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded)."
::= { fsMIStdOspfv3Entry 12 }
fsMIStdOspfv3MulticastExtensions OBJECT-TYPE
SYNTAX BITS {
intraAreaMulticast(0),
interAreaMulticast(1),
interAsMulticast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
If intraAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area mul-
ticast routing).
If interAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams between OSPFv3
areas (called inter-area multicast routing).
If interAsMulticast set, indicates that the router can
forward IPv6 multicast datagrams between Auto-
nomous Systems (called inter-AS multicast rout-
ing).
Only certain combinations of bit settings are
allowed, namely:
- All bits cleared (no multicasting)
- intraAreaMulticast only,
- intraAreaMulticast and interAreaMulticast,
- intraAreaMulticast and interAsMulticast
- intraAreaMulticast, interAreaMulticast and
interAsMulticast
By default, all bits are cleared."
::= { fsMIStdOspfv3Entry 13 }
fsMIStdOspfv3ExitOverflowInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-External-LSAs. When
set to 0, the router will not leave Overflow-
State until restarted."
::= { fsMIStdOspfv3Entry 14 }
fsMIStdOspfv3DemandExtensions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for demand routing."
REFERENCE
"OSPF Version 2, Appendix on Demand Routing"
::= { fsMIStdOspfv3Entry 15 }
fsMIStdOspfv3TrafficEngineeringSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for traffic engineering
extensions."
::= { fsMIStdOspfv3Entry 16 }
fsMIStdOspfv3ReferenceBandwidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS)"
::= { fsMIStdOspfv3Entry 17 }
fsMIStdOspfv3RestartSupport OBJECT-TYPE
SYNTAX INTEGER { none (1),
plannedOnly (2),
plannedAndUnplanned (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for OSPF hitless restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts."
::= { fsMIStdOspfv3Entry 18 }
fsMIStdOspfv3RestartInterval OBJECT-TYPE
SYNTAX UpToRefreshInterval
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured OSPF hitless restart timeout interval."
::= { fsMIStdOspfv3Entry 19 }
fsMIStdOspfv3RestartStatus OBJECT-TYPE
SYNTAX INTEGER { notRestarting (1),
plannedRestart (2),
unplannedRestart (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of OSPF hitless restart."
::= { fsMIStdOspfv3Entry 20 }
fsMIStdOspfv3RestartAge OBJECT-TYPE
SYNTAX UpToRefreshInterval
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF hitless restart
interval."
::= { fsMIStdOspfv3Entry 21 }
fsMIStdOspfv3RestartExitReason OBJECT-TYPE
SYNTAX INTEGER { none (1), -- none attempted
inProgress (2), -- restart in
-- progress
completed (3), -- successfully
-- completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to
-- topologychange.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at a
hitless restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is currently underway."
::= { fsMIStdOspfv3Entry 22 }
fsMIStdOspfv3Status OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable displays the status of the en-
try. The internal effect (row removal) is
implementation dependent."
::= { fsMIStdOspfv3Entry 23 }
-- The OSPFv3 Area Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
-- Area 0.0.0.0, by definition, is the Backbone Area
fsMIStdOspfv3AreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3AreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parame-
ters and cumulative statistics of the router's
attached areas."
REFERENCE
"OSPF Version 2, Section 6 The Area Data Struc-
ture"
::= { fsMIStdOspfv3Objects 2 }
fsMIStdOspfv3AreaEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3AreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas."
INDEX { fsMIStdOspfv3ContextId, fsMIStdOspfv3AreaId }
::= { fsMIStdOspfv3AreaTable 1 }
FsMIStdOspfv3AreaEntry ::= SEQUENCE {
fsMIStdOspfv3AreaId
AreaID,
fsMIStdOspfv3ImportAsExtern
INTEGER,
fsMIStdOspfv3AreaSpfRuns
Counter32,
fsMIStdOspfv3AreaBdrRtrCount
Gauge32,
fsMIStdOspfv3AreaAsBdrRtrCount
Gauge32,
fsMIStdOspfv3AreaScopeLsaCount
Gauge32,
fsMIStdOspfv3AreaScopeLsaCksumSum
Integer32,
fsMIStdOspfv3AreaSummary
INTEGER,
fsMIStdOspfv3StubMetric
BigMetric,
fsMIStdOspfv3AreaNssaTranslatorRole
INTEGER,
fsMIStdOspfv3AreaNssaTranslatorState
INTEGER,
fsMIStdOspfv3AreaNssaTranslatorStabilityInterval
Unsigned32,
fsMIStdOspfv3AreaNssaTranslatorEvents
Counter32,
fsMIStdOspfv3AreaStubMetricType
INTEGER,
fsMIStdOspfv3AreaStatus
RowStatus
}
fsMIStdOspfv3AreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPFv3 backbone."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIStdOspfv3AreaEntry 1 }
fsMIStdOspfv3ImportAsExtern OBJECT-TYPE
SYNTAX INTEGER {
importExternal(1), -- normal area
importNoExternal(2), -- stub area
importNssa(3) -- not-so-stubby-area
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as Type-7
LSAs which have Area-scope"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
DEFVAL { importExternal }
::= { fsMIStdOspfv3AreaEntry 2 }
fsMIStdOspfv3AreaSpfRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the intra-area route
table has been calculated using this area's
link-state database. This is typically done
using Dijkstra's algorithm."
::= { fsMIStdOspfv3AreaEntry 3 }
fsMIStdOspfv3AreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass."
::= { fsMIStdOspfv3AreaEntry 4 }
fsMIStdOspfv3AreaAsBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass."
::= { fsMIStdOspfv3AreaEntry 5 }
fsMIStdOspfv3AreaScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Area-Scope link-state
advertisements in this area's link-state
database."
::= { fsMIStdOspfv3AreaEntry 6 }
fsMIStdOspfv3AreaScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Area-Scope link-state
advertisements' LS checksums contained in this
area's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers."
::= { fsMIStdOspfv3AreaEntry 7 }
fsMIStdOspfv3AreaSummary OBJECT-TYPE
SYNTAX INTEGER {
noAreaSummary(1),
sendAreaSummary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The variable ospfv3AreaSummary controls the im-
port of Inter-Area LSAs into stub areas. It has
no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate Inter-Area LSAs into the
stub area. It will rely entirely on its de-
fault route.
If it is sendAreaSummary, the router will both
summarize and propagate Inter-Area LSAs."
DEFVAL { sendAreaSummary }
::= { fsMIStdOspfv3AreaEntry 8 }
fsMIStdOspfv3StubMetric OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric value advertised for the default route
into Stub and NSSA areas."
::= { fsMIStdOspfv3AreaEntry 9 }
fsMIStdOspfv3AreaNssaTranslatorRole OBJECT-TYPE
SYNTAX INTEGER { always(1), candidate(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates an NSSA Border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs."
DEFVAL { candidate }
::= { fsMIStdOspfv3AreaEntry 10 }
fsMIStdOspfv3AreaNssaTranslatorState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
elected(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if and how an NSSA Border router is
performing NSSA translation of type-7 LSAs into type-5
LSAs. When this object is set to enabled, the NSSA
Border router's ospfv3AreaNssTranslatorRole
has been set to always. When this object is set to
elected, a candidate NSSA Border router is translating
type-7 LSAs into type-5. When this object is set to
disabled, a candidate NSSA Border router is NOT
translating type-7 LSAs into type-5."
::= { fsMIStdOspfv3AreaEntry 11 }
fsMIStdOspfv3AreaNssaTranslatorStabilityInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties."
DEFVAL { 40 }
::= { fsMIStdOspfv3AreaEntry 12 }
fsMIStdOspfv3AreaNssaTranslatorEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Translator State changes
that have occurred since the last boot-up."
::= { fsMIStdOspfv3AreaEntry 13 }
fsMIStdOspfv3AreaStubMetricType OBJECT-TYPE
SYNTAX INTEGER {
ospfMetric (1), -- OSPF Metric
comparableCost (2), -- external type 1
nonComparable (3) -- external type 2
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable displays the type of metric ad-
vertised as a default route."
DEFVAL { ospfMetric }
::= { fsMIStdOspfv3AreaEntry 14 }
fsMIStdOspfv3AreaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { fsMIStdOspfv3AreaEntry 15 }
-- OSPFv3 AS-Scope Link State Database
-- The Link State Database contains the AS-Scope Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
fsMIStdOspfv3AsLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3AsLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's AS-Scope Link State Database."
::= { fsMIStdOspfv3Objects 3 }
fsMIStdOspfv3AsLsdbEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3AsLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single AS-Scope Link State Advertisement."
INDEX { fsMIStdOspfv3ContextId,
fsMIStdOspfv3AsLsdbType,
fsMIStdOspfv3AsLsdbRouterId,
fsMIStdOspfv3AsLsdbLsid }
::= { fsMIStdOspfv3AsLsdbTable 1 }
FsMIStdOspfv3AsLsdbEntry ::= SEQUENCE {
fsMIStdOspfv3AsLsdbType
Unsigned32,
fsMIStdOspfv3AsLsdbRouterId
RouterID,
fsMIStdOspfv3AsLsdbLsid
IpAddress,
fsMIStdOspfv3AsLsdbSequence
Integer32,
fsMIStdOspfv3AsLsdbAge
Integer32,
fsMIStdOspfv3AsLsdbChecksum
Integer32,
fsMIStdOspfv3AsLsdbAdvertisement
OCTET STRING,
fsMIStdOspfv3AsLsdbTypeKnown
TruthValue
}
fsMIStdOspfv3AsLsdbType OBJECT-TYPE
SYNTAX Unsigned32(0..'FFFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. AS-Scope LSAs not recognized by
the router may be stored in the database."
::= { fsMIStdOspfv3AsLsdbEntry 1 }
fsMIStdOspfv3AsLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { fsMIStdOspfv3AsLsdbEntry 2 }
fsMIStdOspfv3AsLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { fsMIStdOspfv3AsLsdbEntry 3 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
fsMIStdOspfv3AsLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { fsMIStdOspfv3AsLsdbEntry 4 }
fsMIStdOspfv3AsLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { fsMIStdOspfv3AsLsdbEntry 5 }
fsMIStdOspfv3AsLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { fsMIStdOspfv3AsLsdbEntry 6 }
fsMIStdOspfv3AsLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { fsMIStdOspfv3AsLsdbEntry 7 }
fsMIStdOspfv3AsLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is the LSA type recognized by this Router?"
::= { fsMIStdOspfv3AsLsdbEntry 8 }
-- OSPFv3 Area-Scope Link State Database
-- The Link State Database contains the Area-Scope Link State
-- Advertisements from throughout the area that the
-- device is attached to.
fsMIStdOspfv3AreaLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3AreaLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's Area-Scope Link State Database."
::= { fsMIStdOspfv3Objects 4 }
fsMIStdOspfv3AreaLsdbEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3AreaLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Area-Scope Link State Advertisement."
INDEX { fsMIStdOspfv3ContextId,
fsMIStdOspfv3AreaLsdbAreaId,
fsMIStdOspfv3AreaLsdbType,
fsMIStdOspfv3AreaLsdbRouterId,
fsMIStdOspfv3AreaLsdbLsid }
::= { fsMIStdOspfv3AreaLsdbTable 1 }
FsMIStdOspfv3AreaLsdbEntry ::= SEQUENCE {
fsMIStdOspfv3AreaLsdbAreaId
AreaID,
fsMIStdOspfv3AreaLsdbType
Unsigned32,
fsMIStdOspfv3AreaLsdbRouterId
RouterID,
fsMIStdOspfv3AreaLsdbLsid
IpAddress,
fsMIStdOspfv3AreaLsdbSequence
Integer32,
fsMIStdOspfv3AreaLsdbAge
Integer32,
fsMIStdOspfv3AreaLsdbChecksum
Integer32,
fsMIStdOspfv3AreaLsdbAdvertisement
OCTET STRING,
fsMIStdOspfv3AreaLsdbTypeKnown
TruthValue
}
fsMIStdOspfv3AreaLsdbAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit identifier of the Area from which the
LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIStdOspfv3AreaLsdbEntry 1 }
fsMIStdOspfv3AreaLsdbType OBJECT-TYPE
SYNTAX Unsigned32(0..'FFFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Area-Scope LSAs unrecognized by the
router are also stored in this database."
::= { fsMIStdOspfv3AreaLsdbEntry 2 }
fsMIStdOspfv3AreaLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { fsMIStdOspfv3AreaLsdbEntry 3 }
fsMIStdOspfv3AreaLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { fsMIStdOspfv3AreaLsdbEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
fsMIStdOspfv3AreaLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { fsMIStdOspfv3AreaLsdbEntry 5 }
fsMIStdOspfv3AreaLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { fsMIStdOspfv3AreaLsdbEntry 6 }
fsMIStdOspfv3AreaLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { fsMIStdOspfv3AreaLsdbEntry 7 }
fsMIStdOspfv3AreaLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { fsMIStdOspfv3AreaLsdbEntry 8 }
fsMIStdOspfv3AreaLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is the LSA type recognized by this Router?"
::= { fsMIStdOspfv3AreaLsdbEntry 9 }
-- OSPFv3 Link-Scope Link State Database
-- The Link State Database contains the Link-Scope Link State
-- Advertisements from the links that the
-- device is attached to.
fsMIStdOspfv3LinkLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3LinkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's Link-Scope Link State Database."
::= { fsMIStdOspfv3Objects 5 }
fsMIStdOspfv3LinkLsdbEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3LinkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link-Scope Link State Advertisement."
INDEX { fsMIStdOspfv3LinkLsdbIfIndex,
fsMIStdOspfv3LinkLsdbType,
fsMIStdOspfv3LinkLsdbRouterId,
fsMIStdOspfv3LinkLsdbLsid }
::= { fsMIStdOspfv3LinkLsdbTable 1 }
FsMIStdOspfv3LinkLsdbEntry ::= SEQUENCE {
fsMIStdOspfv3LinkLsdbIfIndex
InterfaceIndex,
fsMIStdOspfv3LinkLsdbType
Unsigned32,
fsMIStdOspfv3LinkLsdbRouterId
RouterID,
fsMIStdOspfv3LinkLsdbLsid
IpAddress,
fsMIStdOspfv3LinkLsdbSequence
Integer32,
fsMIStdOspfv3LinkLsdbAge
Integer32,
fsMIStdOspfv3LinkLsdbChecksum
Integer32,
fsMIStdOspfv3LinkLsdbAdvertisement
OCTET STRING,
fsMIStdOspfv3LinkLsdbTypeKnown
TruthValue,
fsMIStdOspfv3LinkLsdbContextId
Integer32
}
fsMIStdOspfv3LinkLsdbIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the link from which the LSA
was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIStdOspfv3LinkLsdbEntry 1 }
fsMIStdOspfv3LinkLsdbType OBJECT-TYPE
SYNTAX Unsigned32(0..'FFFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Link-Scope LSAs unrecognized by the
router are also stored in this database."
::= { fsMIStdOspfv3LinkLsdbEntry 2 }
fsMIStdOspfv3LinkLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { fsMIStdOspfv3LinkLsdbEntry 3 }
fsMIStdOspfv3LinkLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { fsMIStdOspfv3LinkLsdbEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
fsMIStdOspfv3LinkLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { fsMIStdOspfv3LinkLsdbEntry 5 }
fsMIStdOspfv3LinkLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state
advertisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { fsMIStdOspfv3LinkLsdbEntry 6 }
fsMIStdOspfv3LinkLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { fsMIStdOspfv3LinkLsdbEntry 7 }
fsMIStdOspfv3LinkLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { fsMIStdOspfv3LinkLsdbEntry 8 }
fsMIStdOspfv3LinkLsdbTypeKnown OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LSA type is recognized by this
Router."
::= { fsMIStdOspfv3LinkLsdbEntry 9 }
fsMIStdOspfv3LinkLsdbContextId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon system
configuration. Default value is 0 which will be initialized
during bootup"
::= { fsMIStdOspfv3LinkLsdbEntry 10 }
-- OSPF Host Table
-- The Host/Metric Table indicates what hosts are directly
-- attached to the Router, and what metrics and types of
-- service should be advertised for them.
fsMIStdOspfv3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of Hosts, and their metrics, that the
router will advertise as host routes."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route param-
eters"
::= { fsMIStdOspfv3Objects 6 }
fsMIStdOspfv3HostEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A metric to be advertised when a given host is
reachable."
INDEX { fsMIStdOspfv3ContextId,
fsMIStdOspfv3HostAddressType,
fsMIStdOspfv3HostAddress }
::= { fsMIStdOspfv3HostTable 1 }
FsMIStdOspfv3HostEntry ::= SEQUENCE {
fsMIStdOspfv3HostAddressType
InetAddressType,
fsMIStdOspfv3HostAddress
InetAddress,
fsMIStdOspfv3HostMetric
Metric,
fsMIStdOspfv3HostAreaID
AreaID,
fsMIStdOspfv3HostStatus
RowStatus
}
fsMIStdOspfv3HostAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of fsMIStdOspfv3HostAddress. Only IPv6
addresses without zone index are expected."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame-
ters"
::= { fsMIStdOspfv3HostEntry 1 }
fsMIStdOspfv3HostAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Address of the Host. Must be a Global
or Site-local address."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame-
ters"
::= { fsMIStdOspfv3HostEntry 2 }
fsMIStdOspfv3HostMetric OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Metric to be advertised."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame-
ters"
::= { fsMIStdOspfv3HostEntry 3 }
fsMIStdOspfv3HostAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Area the Host Entry is to be found within.
By default, the area that a subsuming OSPFv3 in-
terface is in, or 0.0.0.0"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIStdOspfv3HostEntry 4 }
fsMIStdOspfv3HostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { fsMIStdOspfv3HostEntry 5 }
-- OSPFv3 Interface Table
fsMIStdOspfv3IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Interface Table describes the inter-
faces from the viewpoint of OSPFv3."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { fsMIStdOspfv3Objects 7 }
fsMIStdOspfv3IfEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3."
INDEX {fsMIStdOspfv3IfIndex }
::= { fsMIStdOspfv3IfTable 1 }
FsMIStdOspfv3IfEntry ::= SEQUENCE {
fsMIStdOspfv3IfIndex
InterfaceIndex,
fsMIStdOspfv3IfAreaId
AreaID,
fsMIStdOspfv3IfType
INTEGER,
fsMIStdOspfv3IfAdminStat
Status,
fsMIStdOspfv3IfRtrPriority
DesignatedRouterPriority,
fsMIStdOspfv3IfTransitDelay
UpToRefreshInterval,
fsMIStdOspfv3IfRetransInterval
UpToRefreshInterval,
fsMIStdOspfv3IfHelloInterval
HelloRange,
fsMIStdOspfv3IfRtrDeadInterval
RouterDeadRange,
fsMIStdOspfv3IfPollInterval
Unsigned32,
fsMIStdOspfv3IfState
INTEGER,
fsMIStdOspfv3IfDesignatedRouter
RouterID,
fsMIStdOspfv3IfBackupDesignatedRouter
RouterID,
fsMIStdOspfv3IfEvents
Counter32,
fsMIStdOspfv3IfMulticastForwarding
INTEGER,
fsMIStdOspfv3IfDemand
TruthValue,
fsMIStdOspfv3IfMetricValue
Metric,
fsMIStdOspfv3IfLinkScopeLsaCount
Gauge32,
fsMIStdOspfv3IfLinkLsaCksumSum
Integer32,
fsMIStdOspfv3IfInstId
Integer32,
fsMIStdOspfv3IfDemandNbrProbe
TruthValue,
fsMIStdOspfv3IfDemandNbrProbeRetxLimit
Unsigned32,
fsMIStdOspfv3IfDemandNbrProbeInterval
Unsigned32,
fsMIStdOspfv3IfContextId
Integer32,
fsMIStdOspfv3IfStatus
RowStatus
}
fsMIStdOspfv3IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured."
::= { fsMIStdOspfv3IfEntry 1 }
fsMIStdOspfv3IfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPFv3 backbone."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { fsMIStdOspfv3IfEntry 2 }
fsMIStdOspfv3IfType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
nbma(2),
pointToPoint(3),
pointToMultipoint(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPFv3 interface type."
::= { fsMIStdOspfv3IfEntry 3 }
fsMIStdOspfv3IfAdminStat OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPFv3 interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPFv3."
DEFVAL { enabled }
::= { fsMIStdOspfv3IfEntry 4 }
fsMIStdOspfv3IfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker."
DEFVAL { 1 }
::= { fsMIStdOspfv3IfEntry 5 }
fsMIStdOspfv3IfTransitDelay OBJECT-TYPE
SYNTAX UpToRefreshInterval
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link state update packet over this
interface."
DEFVAL { 1 }
::= { fsMIStdOspfv3IfEntry 6 }
fsMIStdOspfv3IfRetransInterval OBJECT-TYPE
SYNTAX UpToRefreshInterval
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets."
DEFVAL { 5 }
::= { fsMIStdOspfv3IfEntry 7 }
fsMIStdOspfv3IfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network."
DEFVAL { 10 }
::= { fsMIStdOspfv3IfEntry 8 }
fsMIStdOspfv3IfRtrDeadInterval OBJECT-TYPE
SYNTAX RouterDeadRange
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network."
DEFVAL { 40 }
::= { fsMIStdOspfv3IfEntry 9 }
fsMIStdOspfv3IfPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor."
DEFVAL { 120 }
::= { fsMIStdOspfv3IfEntry 10 }
fsMIStdOspfv3IfState OBJECT-TYPE
SYNTAX INTEGER {
down(1), -- The interface is Down
loopback(2), -- The interface may be looped back in hardware
-- or software
waiting(3), -- the router is trying to determine the
-- identity of the DR/BDR for the network
pointToPoint(4), -- the interface is operational, and connects
-- either to a physical point-to-point
-- network or to a virtual link
designatedRouter(5), -- The router itself is the Designated Router
-- on the attached network
backupDesignatedRouter(6),-- The router itself is the BDR
-- on the attached network
otherDesignatedRouter(7), -- The interface is to a broadcast or NBMA
-- network on which another router has been
-- selected to be the Designated Router
standbyOnLink(8) -- the interface is one of multiple interfaces
-- to a link and this interface is not sending
-- or receiving control packets. By Default an
-- interface is 'activeOnLink'.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Interface State."
::= { fsMIStdOspfv3IfEntry 11 }
fsMIStdOspfv3IfDesignatedRouter OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the Designated Router."
::= { fsMIStdOspfv3IfEntry 12 }
fsMIStdOspfv3IfBackupDesignatedRouter OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the Backup Designated
Router."
::= { fsMIStdOspfv3IfEntry 13 }
fsMIStdOspfv3IfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this OSPF interface has
changed its state, or an error has occurred."
::= { fsMIStdOspfv3IfEntry 14 }
fsMIStdOspfv3IfMulticastForwarding OBJECT-TYPE
SYNTAX INTEGER {
blocked(1), -- no multicast forwarding
multicast(2), -- using multicast address
unicast(3) -- to each OSPFv3 neighbor
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting fsMIStdOspfv3MulticastForwarding to 0 effective-
ly disables all multicast forwarding."
DEFVAL { blocked }
::= { fsMIStdOspfv3IfEntry 15 }
fsMIStdOspfv3IfDemand OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Demand OSPFv3 procedures (hel-
lo suppression to FULL neighbors and setting the
DoNotAge flag on propagated LSAs) should be per-
formed on this interface."
DEFVAL { false }
::= { fsMIStdOspfv3IfEntry 16 }
fsMIStdOspfv3IfMetricValue OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value of the
reference bandwidth is configured by the
fsMIStdOspfv3ReferenceBandwidth object."
::= { fsMIStdOspfv3IfEntry 17 }
fsMIStdOspfv3IfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link-Scope link-state
advertisements in this link's link-state database."
::= { fsMIStdOspfv3IfEntry 18 }
fsMIStdOspfv3IfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers."
::= { fsMIStdOspfv3IfEntry 19 }
fsMIStdOspfv3IfInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables multiple instances of OSPFv3 to be run over
a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance
only."
DEFVAL { 0 }
::= { fsMIStdOspfv3IfEntry 20 }
fsMIStdOspfv3IfDemandNbrProbe OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Indicates whether or not neighbor probing is
enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by
default."
DEFVAL { false }
::= { fsMIStdOspfv3IfEntry 21 }
fsMIStdOspfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor
adjacency is brought down."
DEFVAL { 10 }
::= { fsMIStdOspfv3IfEntry 22 }
fsMIStdOspfv3IfDemandNbrProbeInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Defines how often the neighbor will be probed."
DEFVAL { 120 }
::= { fsMIStdOspfv3IfEntry 23 }
fsMIStdOspfv3IfContextId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon system
configuration. Default value is 0 which will be initialized
during bootup"
::= { fsMIStdOspfv3IfEntry 24 }
fsMIStdOspfv3IfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail in
[6]."
::= { fsMIStdOspfv3IfEntry 25 }
-- OSPFv3 Virtual Interface Table
-- The Virtual Interface Table describes the virtual
-- links that the OSPFv3 Process is configured to
-- carry on.
fsMIStdOspfv3VirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3VirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about this router's virtual inter-
faces."
REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link
parameters"
::= { fsMIStdOspfv3Objects 8 }
fsMIStdOspfv3VirtIfEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3VirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single Virtual Interface."
INDEX { fsMIStdOspfv3ContextId,
fsMIStdOspfv3VirtIfAreaId,
fsMIStdOspfv3VirtIfNeighbor }
::= { fsMIStdOspfv3VirtIfTable 1 }
FsMIStdOspfv3VirtIfEntry ::= SEQUENCE {
fsMIStdOspfv3VirtIfAreaId
AreaID,
fsMIStdOspfv3VirtIfNeighbor
RouterID,
fsMIStdOspfv3VirtIfIndex
InterfaceIndex,
fsMIStdOspfv3VirtIfTransitDelay
UpToRefreshInterval,
fsMIStdOspfv3VirtIfRetransInterval
UpToRefreshInterval,
fsMIStdOspfv3VirtIfHelloInterval
HelloRange,
fsMIStdOspfv3VirtIfRtrDeadInterval
RouterDeadRange,
fsMIStdOspfv3VirtIfState
INTEGER,
fsMIStdOspfv3VirtIfEvents
Counter32,
fsMIStdOspfv3VirtIfLinkScopeLsaCount
Gauge32,
fsMIStdOspfv3VirtIfLinkLsaCksumSum
Integer32,
fsMIStdOspfv3VirtIfStatus
RowStatus
}
fsMIStdOspfv3VirtIfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0"
::= { fsMIStdOspfv3VirtIfEntry 1 }
fsMIStdOspfv3VirtIfNeighbor OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Router ID of the Virtual Neighbor."
::= { fsMIStdOspfv3VirtIfEntry 2 }
fsMIStdOspfv3VirtIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface ID assigned to this OSPFv3 virtual
interface. It is advertised in Hello's sent over
the virtal link and in the router's router-LSAs."
::= { fsMIStdOspfv3VirtIfEntry 3 }
fsMIStdOspfv3VirtIfTransitDelay OBJECT-TYPE
SYNTAX UpToRefreshInterval
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link- state update packet over this
interface."
DEFVAL { 1 }
::= { fsMIStdOspfv3VirtIfEntry 4 }
fsMIStdOspfv3VirtIfRetransInterval OBJECT-TYPE
SYNTAX UpToRefreshInterval
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time."
DEFVAL { 5 }
::= { fsMIStdOspfv3VirtIfEntry 5 }
fsMIStdOspfv3VirtIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor."
DEFVAL { 10 }
::= { fsMIStdOspfv3VirtIfEntry 6 }
fsMIStdOspfv3VirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX RouterDeadRange
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor."
DEFVAL { 60 }
::= { fsMIStdOspfv3VirtIfEntry 7 }
fsMIStdOspfv3VirtIfState OBJECT-TYPE
SYNTAX INTEGER {
down(1), -- these use the same encoding
pointToPoint(4) -- as the fsMIStdOspfv3IfTable
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF virtual interface states."
::= { fsMIStdOspfv3VirtIfEntry 8 }
fsMIStdOspfv3VirtIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state changes or error events on
this Virtual Link"
::= { fsMIStdOspfv3VirtIfEntry 9 }
fsMIStdOspfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link-Scope link-state
advertisements in this virtual link's link-state
database."
::= { fsMIStdOspfv3VirtIfEntry 10 }
fsMIStdOspfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers."
::= { fsMIStdOspfv3VirtIfEntry 11 }
fsMIStdOspfv3VirtIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { fsMIStdOspfv3VirtIfEntry 12 }
-- OSPFv3 Neighbor Table
-- The OSPFv3 Neighbor Table describes all neighbors in
-- the locality of the subject router.
fsMIStdOspfv3NbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3NbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { fsMIStdOspfv3Objects 9 }
fsMIStdOspfv3NbrEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3NbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single neighbor."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX { fsMIStdOspfv3NbrIfIndex,
fsMIStdOspfv3NbrRtrId }
::= { fsMIStdOspfv3NbrTable 1 }
FsMIStdOspfv3NbrEntry ::= SEQUENCE {
fsMIStdOspfv3NbrIfIndex
InterfaceIndex,
fsMIStdOspfv3NbrRtrId
RouterID,
fsMIStdOspfv3NbrAddressType
InetAddressType,
fsMIStdOspfv3NbrAddress
InetAddress,
fsMIStdOspfv3NbrOptions
Integer32,
fsMIStdOspfv3NbrPriority
DesignatedRouterPriority,
fsMIStdOspfv3NbrState
INTEGER,
fsMIStdOspfv3NbrEvents
Counter32,
fsMIStdOspfv3NbrLsRetransQLen
Gauge32,
fsMIStdOspfv3NbrHelloSuppressed
TruthValue,
fsMIStdOspfv3NbrIfId
InterfaceIndex,
fsMIStdOspfv3NbrRestartHelperStatus
INTEGER,
fsMIStdOspfv3NbrRestartHelperAge
UpToRefreshInterval,
fsMIStdOspfv3NbrRestartHelperExitReason
INTEGER,
fsMIStdOspfv3NbrContextId
Integer32
}
fsMIStdOspfv3NbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local link ID of the link over which the
neighbor can be reached."
::= { fsMIStdOspfv3NbrEntry 1 }
fsMIStdOspfv3NbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System."
::= { fsMIStdOspfv3NbrEntry 2 }
fsMIStdOspfv3NbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of fsMIStdOspfv3NbrAddress. Only IPv6
addresses without zone index are expected."
::= { fsMIStdOspfv3NbrEntry 3 }
fsMIStdOspfv3NbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address of the neighbor associated with
the local link."
::= { fsMIStdOspfv3NbrEntry 4 }
fsMIStdOspfv3NbrOptions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Bit Mask corresponding to the neighbor's op-
tions field."
REFERENCE
"OSPF Version 3, Appendix A.2 the Options field"
::= { fsMIStdOspfv3NbrEntry 5 }
fsMIStdOspfv3NbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network."
::= { fsMIStdOspfv3NbrEntry 6 }
fsMIStdOspfv3NbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The State of the relationship with this Neigh-
bor."
REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States"
::= { fsMIStdOspfv3NbrEntry 7 }
fsMIStdOspfv3NbrEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this neighbor relationship
has changed state, or an error has occurred."
::= { fsMIStdOspfv3NbrEntry 8 }
fsMIStdOspfv3NbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current length of the retransmission
queue."
::= { fsMIStdOspfv3NbrEntry 9 }
fsMIStdOspfv3NbrHelloSuppressed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Hellos are being suppressed
to the neighbor"
::= { fsMIStdOspfv3NbrEntry 10 }
fsMIStdOspfv3NbrIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the
neighbor's local interface index."
::= { fsMIStdOspfv3NbrEntry 11 }
fsMIStdOspfv3NbrRestartHelperStatus OBJECT-TYPE
SYNTAX INTEGER { notHelping (1),
helping (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the router is acting
as a hitless restart helper for the neighbor."
::= { fsMIStdOspfv3NbrEntry 12 }
fsMIStdOspfv3NbrRestartHelperAge OBJECT-TYPE
SYNTAX UpToRefreshInterval
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor."
::= { fsMIStdOspfv3NbrEntry 13 }
fsMIStdOspfv3NbrRestartHelperExitReason OBJECT-TYPE
SYNTAX INTEGER { none (1), -- not attempted
inProgress (2), -- restart in
-- progress
completed (3), -- successfully
-- completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to
-- topology
-- change.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor."
::= { fsMIStdOspfv3NbrEntry 14 }
fsMIStdOspfv3NbrContextId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon system
configuration. Default value is 0 which will be initialized
during bootup"
::= { fsMIStdOspfv3NbrEntry 15 }
-- OSPFv3 NBMA Neighbor Table
-- The OSPFv3 NBMA Neighbor Table describes all configured
-- NBMA neighbors and neighbors dynamically discovered by
-- lower-level protocols such as Inverse Neighbor Discovery.
fsMIStdOspfv3NbmaNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3NbmaNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of configured non-virtual neighbor
information and neighbors dynamically discovered
by lower-level protocols such as Inverse Neighbor
Discovery."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { fsMIStdOspfv3Objects 10 }
fsMIStdOspfv3NbmaNbrEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3NbmaNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX { fsMIStdOspfv3NbmaNbrIfIndex,
fsMIStdOspfv3NbmaNbrAddressType,
fsMIStdOspfv3NbmaNbrAddress }
::= { fsMIStdOspfv3NbmaNbrTable 1 }
FsMIStdOspfv3NbmaNbrEntry ::= SEQUENCE {
fsMIStdOspfv3NbmaNbrIfIndex
InterfaceIndex,
fsMIStdOspfv3NbmaNbrAddressType
InetAddressType,
fsMIStdOspfv3NbmaNbrAddress
InetAddress,
fsMIStdOspfv3NbmaNbrPriority
DesignatedRouterPriority,
fsMIStdOspfv3NbmaNbrRtrId
RouterID,
fsMIStdOspfv3NbmaNbrState
INTEGER,
fsMIStdOspfv3NbmaNbrStorageType
StorageType,
fsMIStdOspfv3NbmaNbrContextId
Integer32,
fsMIStdOspfv3NbmaNbrStatus
RowStatus
}
fsMIStdOspfv3NbmaNbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local link ID of the link over which the
neighbor can be reached."
::= { fsMIStdOspfv3NbmaNbrEntry 1 }
fsMIStdOspfv3NbmaNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of fsMIStdOspfv3NbrAddress. Only IPv6
addresses without zone index are expected."
::= { fsMIStdOspfv3NbmaNbrEntry 2 }
fsMIStdOspfv3NbmaNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address of the neighbor associated with
the local link."
::= { fsMIStdOspfv3NbmaNbrEntry 3 }
fsMIStdOspfv3NbmaNbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network."
DEFVAL { 1 }
::= { fsMIStdOspfv3NbmaNbrEntry 4 }
fsMIStdOspfv3NbmaNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System. A value of
0.0.0.0 is returned until a Hello is received
from the configured neighbor."
::= { fsMIStdOspfv3NbmaNbrEntry 5 }
fsMIStdOspfv3NbmaNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The State of the relationship with this Neigh-
bor."
REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States"
::= { fsMIStdOspfv3NbmaNbrEntry 6 }
fsMIStdOspfv3NbmaNbrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
Manually configured entries will have a storage type
of nonVolatile while entries dynamically created as a
result of a lower-level protocol such as Inverse
Neighbor Discovery will have a storage type of
volatile."
DEFVAL { nonVolatile }
::= { fsMIStdOspfv3NbmaNbrEntry 7 }
fsMIStdOspfv3NbmaNbrContextId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon system
configuration. Default value is 0 which will be initialized
during bootup"
::= { fsMIStdOspfv3NbmaNbrEntry 8 }
fsMIStdOspfv3NbmaNbrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { fsMIStdOspfv3NbmaNbrEntry 9 }
-- OSPFv3 Virtual Neighbor Table
-- This table describes all virtual neighbors.
-- Since Virtual Links are configured in the
-- virtual interface table, this table is read-only.
fsMIStdOspfv3VirtNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3VirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 15 Virtual Links"
::= { fsMIStdOspfv3Objects 11 }
fsMIStdOspfv3VirtNbrEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3VirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual neighbor information."
INDEX { fsMIStdOspfv3ContextId,
fsMIStdOspfv3VirtNbrArea,
fsMIStdOspfv3VirtNbrRtrId }
::= { fsMIStdOspfv3VirtNbrTable 1 }
FsMIStdOspfv3VirtNbrEntry ::= SEQUENCE {
fsMIStdOspfv3VirtNbrArea
AreaID,
fsMIStdOspfv3VirtNbrRtrId
RouterID,
fsMIStdOspfv3VirtNbrIfIndex
InterfaceIndex,
fsMIStdOspfv3VirtNbrAddressType
InetAddressType,
fsMIStdOspfv3VirtNbrAddress
InetAddress,
fsMIStdOspfv3VirtNbrOptions
Integer32,
fsMIStdOspfv3VirtNbrState
INTEGER,
fsMIStdOspfv3VirtNbrEvents
Counter32,
fsMIStdOspfv3VirtNbrLsRetransQLen
Gauge32,
fsMIStdOspfv3VirtNbrHelloSuppressed
TruthValue,
fsMIStdOspfv3VirtNbrIfId
InterfaceIndex,
fsMIStdOspfv3VirtNbrRestartHelperStatus
INTEGER,
fsMIStdOspfv3VirtNbrRestartHelperAge
UpToRefreshInterval,
fsMIStdOspfv3VirtNbrRestartHelperExitReason
INTEGER
}
fsMIStdOspfv3VirtNbrArea OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Transit Area Identifier."
::= { fsMIStdOspfv3VirtNbrEntry 1 }
fsMIStdOspfv3VirtNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
neighboring router in the Autonomous System."
::= { fsMIStdOspfv3VirtNbrEntry 2 }
fsMIStdOspfv3VirtNbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local interface ID for the virtual link over
which the neighbor can be reached."
::= { fsMIStdOspfv3VirtNbrEntry 3 }
fsMIStdOspfv3VirtNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of fsMIStdOspfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected."
::= { fsMIStdOspfv3VirtNbrEntry 4 }
fsMIStdOspfv3VirtNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address advertised by this Virtual Neighbor.
It must be a Site-Local or Global scope address."
::= { fsMIStdOspfv3VirtNbrEntry 5 }
fsMIStdOspfv3VirtNbrOptions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Bit Mask corresponding to the neighbor's op-
tions field."
REFERENCE
"OSPF Version 3, Appendix A.2 the Options field"
::= { fsMIStdOspfv3VirtNbrEntry 6 }
fsMIStdOspfv3VirtNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Virtual Neighbor Relation-
ship."
::= { fsMIStdOspfv3VirtNbrEntry 7 }
fsMIStdOspfv3VirtNbrEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this virtual link has
changed its state, or an error has occurred."
::= { fsMIStdOspfv3VirtNbrEntry 8 }
fsMIStdOspfv3VirtNbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current length of the retransmission
queue."
::= { fsMIStdOspfv3VirtNbrEntry 9 }
fsMIStdOspfv3VirtNbrHelloSuppressed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Hellos are being suppressed
to the neighbor"
::= { fsMIStdOspfv3VirtNbrEntry 10 }
fsMIStdOspfv3VirtNbrIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface ID."
::= { fsMIStdOspfv3VirtNbrEntry 11 }
fsMIStdOspfv3VirtNbrRestartHelperStatus OBJECT-TYPE
SYNTAX INTEGER { notHelping (1),
helping (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the router is acting
as a hitless restart helper for the neighbor."
::= { fsMIStdOspfv3VirtNbrEntry 12 }
fsMIStdOspfv3VirtNbrRestartHelperAge OBJECT-TYPE
SYNTAX UpToRefreshInterval
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor."
::= { fsMIStdOspfv3VirtNbrEntry 13 }
fsMIStdOspfv3VirtNbrRestartHelperExitReason OBJECT-TYPE
SYNTAX INTEGER { none (1), -- not attempted
inProgress (2), -- restart in
-- progress
completed (3), -- successfully
-- completed
timedOut (4), -- timed out
topologyChanged (5) -- aborted due to
-- topology
-- change.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor."
::= { fsMIStdOspfv3VirtNbrEntry 14 }
--
-- The OSPFv3 Area Aggregate Table
--
fsMIStdOspfv3AreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsMIStdOspfv3AreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one."
::= { fsMIStdOspfv3Objects 12 }
fsMIStdOspfv3AreaAggregateEntry OBJECT-TYPE
SYNTAX FsMIStdOspfv3AreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
INDEX { fsMIStdOspfv3ContextId,
fsMIStdOspfv3AreaAggregateAreaID,
fsMIStdOspfv3AreaAggregateAreaLsdbType,
fsMIStdOspfv3AreaAggregatePrefixType,
fsMIStdOspfv3AreaAggregatePrefix,
fsMIStdOspfv3AreaAggregatePrefixLength }
::= { fsMIStdOspfv3AreaAggregateTable 1 }
FsMIStdOspfv3AreaAggregateEntry ::= SEQUENCE {
fsMIStdOspfv3AreaAggregateAreaID
AreaID,
fsMIStdOspfv3AreaAggregateAreaLsdbType
INTEGER,
fsMIStdOspfv3AreaAggregatePrefixType
InetAddressType,
fsMIStdOspfv3AreaAggregatePrefix
InetAddress,
fsMIStdOspfv3AreaAggregatePrefixLength
InetAddressPrefixLength,
fsMIStdOspfv3AreaAggregateEffect
INTEGER,
fsMIStdOspfv3AreaAggregateRouteTag
Integer32,
fsMIStdOspfv3AreaAggregateStatus
RowStatus
}
fsMIStdOspfv3AreaAggregateAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Area the Address Aggregate is to be found
within."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIStdOspfv3AreaAggregateEntry 1 }
fsMIStdOspfv3AreaAggregateAreaLsdbType OBJECT-TYPE
SYNTAX INTEGER {
interAreaPrefixLsa(8195), -- 0x2003
nssaExternalLsa(8199) -- 0x2007
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address Ag-
gregate applies to."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { fsMIStdOspfv3AreaAggregateEntry 2 }
fsMIStdOspfv3AreaAggregatePrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix type of fsMIStdOspfv3AreaAggregatePrefix. Only
IPv6 addresses are expected."
::= { fsMIStdOspfv3AreaAggregateEntry 4 }
fsMIStdOspfv3AreaAggregatePrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Prefix."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIStdOspfv3AreaAggregateEntry 5 }
fsMIStdOspfv3AreaAggregatePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength (3..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix (in bits). A prefix can
not be shorter than 3 bits."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { fsMIStdOspfv3AreaAggregateEntry 6 }
fsMIStdOspfv3AreaAggregateEffect OBJECT-TYPE
SYNTAX INTEGER {
advertiseMatching(1),
doNotAdvertiseMatching(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Prefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the prefix not
being advertised at all outside the area."
DEFVAL { advertiseMatching }
::= { fsMIStdOspfv3AreaAggregateEntry 7 }
fsMIStdOspfv3AreaAggregateRouteTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This tag is advertised only in the summarized
As-External LSA when summarizing from type-7 to
type-5."
DEFVAL { 0 }
::= { fsMIStdOspfv3AreaAggregateEntry 8 }
fsMIStdOspfv3AreaAggregateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { fsMIStdOspfv3AreaAggregateEntry 9 }
END
View Git Blame Copy Permalink