2077 lines
73 KiB
Plaintext
2077 lines
73 KiB
Plaintext
-- Copyright (C) 2009-2012 Aricent Group . All Rights Reserved
|
|
|
|
-- /*****************************************************************
|
|
-- * *
|
|
-- * $Id: fsmio3.mib,v 1.6 2015/03/08 11:07:34 siva Exp $ *
|
|
-- * fsmio3.mib *
|
|
-- * *
|
|
-- * OSPFv3 Proprietary MIB. *
|
|
-- * *
|
|
-- ****************************************************************/
|
|
|
|
|
|
ARICENT-MIOSPFV3-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Enterprises MIB for MI OSPFV3 source code product.
|
|
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
|
|
Integer32, IpAddress, enterprises, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue, RowStatus,DisplayString, DateAndTime
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
InetAddressType, InetAddress, InetAddressPrefixLength
|
|
FROM INET-ADDRESS-MIB
|
|
AreaID, BigMetric, Status, RouterID
|
|
FROM OSPF-MIB
|
|
fsMIStdOspfv3Entry, fsMIStdOspfv3NbrEntry, fsMIStdOspfv3ContextId, fsMIStdOspfv3RouterId,
|
|
fsMIStdOspfv3RestartStatus, fsMIStdOspfv3RestartInterval,
|
|
fsMIStdOspfv3RestartExitReason,
|
|
fsMIStdOspfv3NbrRestartHelperStatus, fsMIStdOspfv3NbrRestartHelperAge,
|
|
fsMIStdOspfv3NbrRestartHelperExitReason, fsMIStdOspfv3VirtNbrRestartHelperStatus,
|
|
fsMIStdOspfv3VirtNbrRestartHelperAge, fsMIStdOspfv3VirtNbrRestartHelperExitReason,
|
|
fsMIStdOspfv3VirtIfEntry
|
|
FROM ARICENT-MISTDOSPFV3-MIB;
|
|
|
|
-- org OBJECT IDENTIFIER ::= { iso(1) 3 }
|
|
-- dod OBJECT IDENTIFIER ::= { org 6 }
|
|
-- internet OBJECT IDENTIFIER ::= { dod 1 }
|
|
-- mgmt OBJECT IDENTIFIER ::= { internet 2 }
|
|
-- private OBJECT IDENTIFIER ::= { internet 4 }
|
|
-- enterprises OBJECT IDENTIFIER ::= { iso(1) org(3) dod(6) internet(1) private(4) 1 }
|
|
-- mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
|
|
|
|
|
|
fsMIOspfv3 MODULE-IDENTITY
|
|
LAST-UPDATED "201209050000Z"
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
|
CONTACT-INFO "support@aricent.com"
|
|
DESCRIPTION
|
|
"The Proprietary MI OSPF3 MIB modified
|
|
from FS OSPF3 MIB"
|
|
REVISION "201209050000Z"
|
|
DESCRIPTION
|
|
"The Proprietary MI OSPF3 MIB modified
|
|
from FS OSPF3 MIB"
|
|
|
|
::= { enterprises aricent-communication-holding-ltd (29601) iss(2) 24 }
|
|
|
|
-- OSPF General Variables
|
|
-- These parameters apply globally to the Router's
|
|
-- OSPF Process.
|
|
|
|
fsMIOspfv3GeneralGroup OBJECT IDENTIFIER ::= { fsMIOspfv3 1 }
|
|
fsMIOspfv3Notification OBJECT IDENTIFIER ::= { fsMIOspfv3 101 }
|
|
|
|
-- SCALAR VARIABLE
|
|
|
|
fsMIOspfv3GlobalTraceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the global trace and not specific to any
|
|
context. Levels are defined as follows.
|
|
0x00000100 -- Packet High Level Dump Trace.
|
|
0x00000200 -- Packet Low Level Dump Trace.
|
|
0x00000400 -- Packet Hex Dump Trace.
|
|
0x00000800 -- Critical Trace.
|
|
0x00001000 -- Function Entry Trace.
|
|
0x00002000 -- Function Exit Trace.
|
|
0x00004000 -- Memory Allocation Success Trace.
|
|
0x00008000 -- Memory Allocation Failure Trace.
|
|
0x00010000 -- Hello packet Trace.
|
|
0x00020000 -- DDP packet Trace.
|
|
0x00040000 -- Link State Request Packet Trace.
|
|
0x00080000 -- Link State Update Packet Trace.
|
|
0x00100000 -- Link State Acknowledge Packet Trace.
|
|
0x00200000 -- Interface State Machine Trace.
|
|
0x00400000 -- Neighbor State Machine Trace.
|
|
0x00800000 -- Routing Table Calculation Trace.
|
|
0x01000000 -- RTM Module Trace.
|
|
0x02000000 -- Interface Trace.
|
|
0x04000000 -- NSSA Trace.
|
|
0x08000000 -- Route Aggregation Trace.
|
|
0x10000000 -- Configuration Trace.
|
|
0x20000000 -- Adjacency formation Trace.
|
|
0x40000000 -- Link State Database Trace.
|
|
0x80000000 -- Protocol Packet Processing Trace."
|
|
::= { fsMIOspfv3GeneralGroup 1}
|
|
|
|
fsMIOspfv3VrfSpfInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (10..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum time between two consecutive SPF calculations
|
|
across two ospf instances. Time is configured in milli
|
|
seconds."
|
|
DEFVAL {10}
|
|
::= { fsMIOspfv3GeneralGroup 2}
|
|
|
|
fsMIOspfv3RTStaggeringStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of route table calculation
|
|
staggering option"
|
|
DEFVAL { enable }
|
|
::= { fsMIOspfv3GeneralGroup 3 }
|
|
|
|
|
|
-- Start of MIB objects related to OSPFv3 Hot-Standby
|
|
|
|
fsMIOspfv3HotStandbyAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Availabilty feature enabled or disabled in OSPFv3"
|
|
::= { fsMIOspfv3GeneralGroup 4 }
|
|
|
|
fsMIOspfv3HotStandbyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
init(1),
|
|
activeStandbyUp(2),
|
|
activeStandbyDown(3),
|
|
standby(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internal State of the OSPFv3 instance
|
|
init(1) - OSPFv3 instance is up and RM State is undetermined.
|
|
activeStandbyUp(2) - The RM state is active & standby is up.
|
|
activeStandbyDown(3) - The RM state is active & standby down.
|
|
standby(4) - The RM state is standby."
|
|
|
|
::= { fsMIOspfv3GeneralGroup 5 }
|
|
|
|
fsMIOspfv3DynamicBulkUpdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notStarted(1),
|
|
inProgress(2),
|
|
completed(3),
|
|
aborted(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of dynamic bulk update between active and dynamic
|
|
OSPFv3 instance.
|
|
notStarted(1): Dynamic Bulk Update has not started.
|
|
inProgress(2): Dynamic Bulk Update is in Progress.
|
|
completed (3): Dynamic Bulk Update is complete.
|
|
aborted (4): Dynamic Bulk Update is aborted."
|
|
::= { fsMIOspfv3GeneralGroup 6 }
|
|
|
|
fsMIOspfv3StandbyHelloSyncCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of hello packets synced to standby node."
|
|
::= { fsMIOspfv3GeneralGroup 7 }
|
|
|
|
fsMIOspfv3StandbyLsaSyncCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of LSAs synced to standby node."
|
|
::= { fsMIOspfv3GeneralGroup 8 }
|
|
|
|
|
|
-- TABLE_END fsMIOspfv3GeneralGroup
|
|
|
|
-- END SCALAR VARIABLE
|
|
|
|
-- OSPF MI Table
|
|
-- contains information regarding various instances
|
|
-- of the router
|
|
|
|
|
|
fsMIOspfv3Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the parameters
|
|
of router's instances"
|
|
::= { fsMIOspfv3 2 }
|
|
|
|
fsMIOspfv3Entry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the parameters
|
|
of one of the router's instances"
|
|
AUGMENTS { fsMIStdOspfv3Entry }
|
|
::= { fsMIOspfv3Table 1 }
|
|
|
|
FsMIOspfv3Entry ::=
|
|
SEQUENCE {
|
|
fsMIOspfv3OverFlowState
|
|
TruthValue,
|
|
fsMIOspfv3TraceLevel
|
|
Integer32,
|
|
fsMIOspfv3ABRType
|
|
INTEGER,
|
|
fsMIOspfv3NssaAsbrDefRtTrans
|
|
INTEGER,
|
|
fsMIOspfv3DefaultPassiveInterface
|
|
TruthValue,
|
|
fsMIOspfv3SpfDelay
|
|
Integer32,
|
|
fsMIOspfv3SpfHoldTime
|
|
Integer32,
|
|
fsMIOspfv3RTStaggeringInterval
|
|
Integer32,
|
|
fsMIOspfv3RestartStrictLsaChecking
|
|
TruthValue,
|
|
fsMIOspfv3HelperSupport
|
|
BITS,
|
|
fsMIOspfv3HelperGraceTimeLimit
|
|
Integer32,
|
|
fsMIOspfv3RestartAckState
|
|
INTEGER,
|
|
fsMIOspfv3GraceLsaRetransmitCount
|
|
Integer32,
|
|
fsMIOspfv3RestartReason
|
|
INTEGER,
|
|
fsMIOspfv3ExtTraceLevel
|
|
Integer32,
|
|
fsMIOspfv3SetTraps
|
|
Integer32,
|
|
fsMIOspfv3BfdStatus
|
|
INTEGER,
|
|
fsMIOspfv3BfdAllIfState
|
|
INTEGER
|
|
}
|
|
|
|
fsMIOspfv3OverFlowState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether router is in overflow state or not."
|
|
DEFVAL { false }
|
|
::= { fsMIOspfv3Entry 1 }
|
|
|
|
fsMIOspfv3TraceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is used to define level of trace required for OSPF.
|
|
Levels are defined as follows.
|
|
0x00000100 -- Packet High Level Dump Trace.
|
|
0x00000200 -- Packet Low Level Dump Trace.
|
|
0x00000400 -- Packet Hex Dump Trace.
|
|
0x00000800 -- Critical Trace.
|
|
0x00001000 -- Function Entry Trace.
|
|
0x00002000 -- Function Exit Trace.
|
|
0x00004000 -- Memory Allocation Success Trace.
|
|
0x00008000 -- Memory Allocation Failure Trace.
|
|
0x00010000 -- Hello packet Trace.
|
|
0x00020000 -- DDP packet Trace.
|
|
0x00040000 -- Link State Request Packet Trace.
|
|
0x00080000 -- Link State Update Packet Trace.
|
|
0x00100000 -- Link State Acknowledge Packet Trace.
|
|
0x00200000 -- Interface State Machine Trace.
|
|
0x00400000 -- Neighbor State Machine Trace.
|
|
0x00800000 -- Routing Table Calculation Trace.
|
|
0x01000000 -- RTM Module Trace.
|
|
0x02000000 -- Interface Trace.
|
|
0x04000000 -- NSSA Trace.
|
|
0x08000000 -- Route Aggregation Trace.
|
|
0x10000000 -- Configuration Trace.
|
|
0x20000000 -- Adjacency formation Trace.
|
|
0x40000000 -- Link State Database Trace.
|
|
0x80000000 -- Protocol Packet Processing Trace."
|
|
DEFVAL { '00000800'H }
|
|
::= { fsMIOspfv3Entry 2 }
|
|
|
|
fsMIOspfv3ABRType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
standardABR (1),
|
|
ciscoABR (2),
|
|
ibmABR (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Different Types of ABRs supported"
|
|
REFERENCE
|
|
"RFC-3509 -- Alternative Implementations of OSPF Area Border
|
|
Routers"
|
|
DEFVAL { standardABR }
|
|
::= { fsMIOspfv3Entry 3 }
|
|
|
|
fsMIOspfv3NssaAsbrDefRtTrans OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1) ,
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the P-Bit setting for the default Type-7
|
|
LSA generated by ASBR(which is not ABR).When set
|
|
disabled, P-Bit is clear in the generated default Lsa.
|
|
When set to enabled, P-Bit is set in the generated
|
|
Type-7 default Lsa. "
|
|
DEFVAL { disabled }
|
|
::= { fsMIOspfv3Entry 4 }
|
|
|
|
fsMIOspfv3DefaultPassiveInterface OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to true all OSPF interfaces created after this
|
|
setting will be passive interfaces.
|
|
If set to false OSPF interfaces created after this setting
|
|
will not be passive."
|
|
DEFVAL { false }
|
|
::= { fsMIOspfv3Entry 5 }
|
|
|
|
fsMIOspfv3SpfDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Delay at which routing calculation is carried after a
|
|
topology change."
|
|
DEFVAL {5}
|
|
::= { fsMIOspfv3Entry 6 }
|
|
|
|
fsMIOspfv3SpfHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The minimum time between two consecutive SPF calculations."
|
|
DEFVAL {10}
|
|
::= { fsMIOspfv3Entry 7 }
|
|
|
|
fsMIOspfv3RTStaggeringInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1000..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object denotes the time interval in milliseconds after which the route
|
|
calculation is suspended for doing all other OSPFv3 operations. Refault value of
|
|
this object is equal to Hello Interval"
|
|
DEFVAL {10000}
|
|
::= { fsMIOspfv3Entry 8 }
|
|
|
|
|
|
-- OSPFv3 Graceful Restart related MIB objects
|
|
|
|
fsMIOspfv3RestartStrictLsaChecking OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if strict LSA checking is enabled for graceful restart.
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
DEFVAL { false }
|
|
::= { fsMIOspfv3Entry 9 }
|
|
|
|
fsMIOspfv3HelperSupport OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
unknown (0),
|
|
softwareRestart (1),
|
|
swReloadUpgrade (2),
|
|
switchToRedundant(3)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's helper support for OSPFv3 graceful restart.
|
|
Options include: unknown,softwarerestart,swreloadupgrade,
|
|
switchtoredundant.
|
|
fsMIOspfv3HelperSupport is indicated by bitmap.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage.
|
|
By default, all bits are set."
|
|
|
|
::= { fsMIOspfv3Entry 10 }
|
|
|
|
fsMIOspfv3HelperGraceTimeLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured OSPFv3 graceful restart interval limit in helper side.
|
|
Time is configured in seconds. If this object is set to 0, then the
|
|
helper accepts the restarting router's grace period received from grace LSA.
|
|
This object is persistent and when written the entity
|
|
SHOULD save the change to non-volatile storage."
|
|
DEFVAL {0}
|
|
::= { fsMIOspfv3Entry 11 }
|
|
|
|
fsMIOspfv3RestartAckState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates Reception required / not-required . whether GraceLSAs
|
|
sent by this router are expected to be acknowledged by peers.
|
|
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
DEFVAL {enabled}
|
|
::= { fsMIOspfv3Entry 12 }
|
|
|
|
fsMIOspfv3GraceLsaRetransmitCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..180)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of retransmissions for unacknowledged GraceLSAs"
|
|
DEFVAL {2}
|
|
::= { fsMIOspfv3Entry 13 }
|
|
|
|
fsMIOspfv3RestartReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (0),
|
|
softwareRestart (1),
|
|
swReloadUpgrade (2),
|
|
switchToRedundant(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's restarter reason code of OSPFv3 graceful restart.
|
|
Options include: unknown,softwarerestart,swreloadupgrade,
|
|
switchtoredundant.
|
|
This object is persistent and when written
|
|
the entity SHOULD save the change to non-volatile
|
|
storage."
|
|
|
|
DEFVAL {unknown}
|
|
::= { fsMIOspfv3Entry 14 }
|
|
|
|
fsMIOspfv3ExtTraceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is used to define level of trace required for OSPFv3 GR.
|
|
Levels are defined as follows.
|
|
0x00000001 -- Restating router Trace.
|
|
0x00000002 -- Helper Trace."
|
|
::= { fsMIOspfv3Entry 15 }
|
|
|
|
fsMIOspfv3SetTraps OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to enable and disable specific
|
|
OSPFv3 traps. Currently the following are defined
|
|
0x00000000 - Traps are not enabled.
|
|
0x00000001 - Restarting router status changes
|
|
0x00000002 - Nieghbor Helper status changes
|
|
0x00000004 - Virtual Neighbor Helper Status Changes
|
|
0x00000008 - Hot Standby state change Trap Events"
|
|
::= { fsMIOspfv3Entry 16 }
|
|
|
|
fsMIOspfv3BfdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables BFD feature in OSPFv3.
|
|
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring"
|
|
DEFVAL { disabled }
|
|
::= { fsMIOspfv3Entry 17 }
|
|
|
|
fsMIOspfv3BfdAllIfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables/disables BFD for all OSPFv3 interfaces.
|
|
If enabled, OSPFv3 registers with BFD for neighbor IP path monitoring,
|
|
when the OSPFv3 neighbor state is FULL. Enabling this object
|
|
internally enables BFD for all the interface entries.
|
|
|
|
If disabled, OSPFv3 de-registers from BFD for all the neighbors
|
|
associated with any of the OSPFv3 interface and does not allow any
|
|
registration with BFD for neighbor Path monitoring"
|
|
DEFVAL { disabled }
|
|
::= { fsMIOspfv3Entry 18 }
|
|
|
|
|
|
-- OSPF Interface Table
|
|
-- The fsMIOspfv3IfTable is an extention to the ospfIfTable
|
|
-- and has statistical information associted with each interface.
|
|
|
|
fsMIOspfv3IfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface Table describes the inter-
|
|
faces from the viewpoint of OSPFv3."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.3 Router interface
|
|
parameters."
|
|
::= { fsMIOspfv3 3 }
|
|
|
|
fsMIOspfv3IfEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPFv3 Interface Entry describes one inter-
|
|
face from the viewpoint of OSPFv3."
|
|
INDEX { fsMIOspfv3IfIndex }
|
|
::= { fsMIOspfv3IfTable 1 }
|
|
|
|
FsMIOspfv3IfEntry ::= SEQUENCE {
|
|
fsMIOspfv3IfIndex InterfaceIndex,
|
|
fsMIOspfv3IfOperState INTEGER,
|
|
fsMIOspfv3IfPassive TruthValue,
|
|
fsMIOspfv3IfNbrCount Gauge32,
|
|
fsMIOspfv3IfAdjCount Gauge32,
|
|
fsMIOspfv3IfHelloRcvd Counter32,
|
|
fsMIOspfv3IfHelloTxed Counter32,
|
|
fsMIOspfv3IfHelloDisd Counter32,
|
|
fsMIOspfv3IfDdpRcvd Counter32,
|
|
fsMIOspfv3IfDdpTxed Counter32,
|
|
fsMIOspfv3IfDdpDisd Counter32,
|
|
fsMIOspfv3IfLrqRcvd Counter32,
|
|
fsMIOspfv3IfLrqTxed Counter32,
|
|
fsMIOspfv3IfLrqDisd Counter32,
|
|
fsMIOspfv3IfLsuRcvd Counter32,
|
|
fsMIOspfv3IfLsuTxed Counter32,
|
|
fsMIOspfv3IfLsuDisd Counter32,
|
|
fsMIOspfv3IfLakRcvd Counter32,
|
|
fsMIOspfv3IfLakTxed Counter32,
|
|
fsMIOspfv3IfLakDisd Counter32,
|
|
fsMIOspfv3IfContextId Integer32,
|
|
fsMIOspfv3IfLinkLSASuppression TruthValue,
|
|
fsMIOspfv3IfBfdState INTEGER,
|
|
fsMIOspfv3IfCryptoAuthType INTEGER,
|
|
fsMIOspfv3IfCryptoAuthMode INTEGER,
|
|
fsMIOspfv3IfAuthTxed Counter32,
|
|
fsMIOspfv3IfAuthRcvd Counter32,
|
|
fsMIOspfv3IfAuthDisd Counter32
|
|
|
|
}
|
|
|
|
fsMIOspfv3IfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index of this OSPFv3 interface.
|
|
It corresponds to the interface index of the
|
|
IPv6 interface on which OSPFv3 is configured."
|
|
::= { fsMIOspfv3IfEntry 1 }
|
|
|
|
fsMIOspfv3IfOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operup (1),
|
|
operdown (2),
|
|
loopback (3),
|
|
unloop (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Operational Status of the Interface."
|
|
::= { fsMIOspfv3IfEntry 2 }
|
|
|
|
fsMIOspfv3IfPassive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object is used to make the inteface as passive.
|
|
If set to TRUE, then interface will be passive
|
|
If set to FALSE then interface will be normal"
|
|
DEFVAL { false }
|
|
::= { fsMIOspfv3IfEntry 3 }
|
|
|
|
fsMIOspfv3IfNbrCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Neighbour's through
|
|
that Interface."
|
|
::= { fsMIOspfv3IfEntry 4 }
|
|
|
|
fsMIOspfv3IfAdjCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Adjacencies through
|
|
that Interface."
|
|
::= { fsMIOspfv3IfEntry 5 }
|
|
|
|
fsMIOspfv3IfHelloRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Hello packets received
|
|
through that Interface."
|
|
::= { fsMIOspfv3IfEntry 6 }
|
|
|
|
fsMIOspfv3IfHelloTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Hello packets
|
|
transmitted through that Interface."
|
|
::= { fsMIOspfv3IfEntry 7 }
|
|
|
|
fsMIOspfv3IfHelloDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Hello packets
|
|
discarded through that Interface."
|
|
::= { fsMIOspfv3IfEntry 8 }
|
|
|
|
fsMIOspfv3IfDdpRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Ddp packets received
|
|
through that Interface."
|
|
::= { fsMIOspfv3IfEntry 9 }
|
|
|
|
fsMIOspfv3IfDdpTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Ddp packets
|
|
transmitted through that Interface."
|
|
::= { fsMIOspfv3IfEntry 10 }
|
|
|
|
fsMIOspfv3IfDdpDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Ddp packets discarded
|
|
through that Interface."
|
|
::= { fsMIOspfv3IfEntry 11 }
|
|
|
|
fsMIOspfv3IfLrqRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lrq packets received
|
|
through that Interface."
|
|
::= { fsMIOspfv3IfEntry 12 }
|
|
|
|
fsMIOspfv3IfLrqTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lrq packets
|
|
transmitted through that Interface."
|
|
::= { fsMIOspfv3IfEntry 13 }
|
|
|
|
fsMIOspfv3IfLrqDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lrq packets discarded
|
|
through that Interface."
|
|
::= { fsMIOspfv3IfEntry 14 }
|
|
|
|
fsMIOspfv3IfLsuRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lsu packets received
|
|
through that Interface."
|
|
::= { fsMIOspfv3IfEntry 15 }
|
|
|
|
fsMIOspfv3IfLsuTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lsu packets
|
|
transmitted through that Interface."
|
|
::= { fsMIOspfv3IfEntry 16 }
|
|
|
|
fsMIOspfv3IfLsuDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lsu packets discarded
|
|
through that Interface."
|
|
::= { fsMIOspfv3IfEntry 17 }
|
|
|
|
fsMIOspfv3IfLakRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lak packets received
|
|
through that Interface."
|
|
::= { fsMIOspfv3IfEntry 18 }
|
|
|
|
fsMIOspfv3IfLakTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lak packets
|
|
transmitted through that Interface."
|
|
::= { fsMIOspfv3IfEntry 19 }
|
|
|
|
fsMIOspfv3IfLakDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This gives the Total number of Lak packets discarded
|
|
on that Interface."
|
|
::= { fsMIOspfv3IfEntry 20 }
|
|
|
|
fsMIOspfv3IfContextId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit unique context id for each entry.
|
|
Minimum value is 0 and Maximum depends upon system
|
|
configuration. Default value is 0 which will be initialized
|
|
during bootup"
|
|
::= { fsMIOspfv3IfEntry 21 }
|
|
|
|
fsMIOspfv3IfLinkLSASuppression OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether or not link LSA origination is
|
|
suppressed for networks other than broadcast or NBMA.
|
|
The object is set to value true (1) to suppress
|
|
the origination."
|
|
REFERENCE
|
|
"OSPF for IPv6, Appendix C.3, Router Interface
|
|
Parameters"
|
|
DEFVAL { false }
|
|
::= { fsMIOspfv3IfEntry 22 }
|
|
|
|
fsMIOspfv3IfBfdState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object enables/disables BFD in a specific OSPFv3 interface.
|
|
This object is set to be enabled internally for particular interface entry
|
|
when fsMIOspfv3BfdAllIfState is enabled.
|
|
|
|
If fsMIOspfv3BfdAllIfState is disabled and this object
|
|
is enabled, OSPFv3 registers with BFD for monitoring the neighbor
|
|
IP path, for the neighbors associated with this OSPFv3 interface alone.
|
|
|
|
When disabled, OSPFv3 de-registers from BFD and does not allow
|
|
registration with BFD for the neighbors associated with this interface."
|
|
|
|
DEFVAL { disabled }
|
|
::= { fsMIOspfv3IfEntry 23 }
|
|
|
|
fsMIOspfv3IfCryptoAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sha1(1),
|
|
sha256(3),
|
|
sha384(4),
|
|
sha512(5),
|
|
none(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the SHA crypto authentication type to be used on the interface"
|
|
|
|
DEFVAL { none }
|
|
::= { fsMIOspfv3IfEntry 24 }
|
|
|
|
fsMIOspfv3IfCryptoAuthMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full(1),
|
|
transition(2),
|
|
none(3)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the crypto authentication mode to be used on the interface"
|
|
|
|
DEFVAL { none }
|
|
::= { fsMIOspfv3IfEntry 25 }
|
|
|
|
fsMIOspfv3IfAuthTxed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the total number of Authentication Trailer packets
|
|
transmitted on the interface."
|
|
::= { fsMIOspfv3IfEntry 26 }
|
|
|
|
fsMIOspfv3IfAuthRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the total number of Authentication Trailer packets
|
|
received on the interface."
|
|
::= { fsMIOspfv3IfEntry 27 }
|
|
|
|
fsMIOspfv3IfAuthDisd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Total number of Authentication Trailer packets
|
|
discarded on the interface."
|
|
::= { fsMIOspfv3IfEntry 28 }
|
|
|
|
-- Routing Table
|
|
|
|
fsMIOspfv3RoutingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3RoutingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of routing information."
|
|
::= { fsMIOspfv3 4 }
|
|
|
|
fsMIOspfv3RoutingEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3RoutingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single route."
|
|
INDEX { fsMIStdOspfv3ContextId,
|
|
fsMIOspfv3RouteDestType,
|
|
fsMIOspfv3RouteDest,
|
|
fsMIOspfv3RoutePfxLength,
|
|
fsMIOspfv3RouteNextHopType,
|
|
fsMIOspfv3RouteNextHop }
|
|
::= { fsMIOspfv3RoutingTable 1 }
|
|
|
|
FsMIOspfv3RoutingEntry ::= SEQUENCE {
|
|
fsMIOspfv3RouteDestType InetAddressType,
|
|
fsMIOspfv3RouteDest InetAddress,
|
|
fsMIOspfv3RoutePfxLength InetAddressPrefixLength,
|
|
fsMIOspfv3RouteNextHopType InetAddressType,
|
|
fsMIOspfv3RouteNextHop InetAddress,
|
|
fsMIOspfv3RouteType INTEGER,
|
|
fsMIOspfv3RouteAreaId AreaID,
|
|
fsMIOspfv3RouteCost BigMetric,
|
|
fsMIOspfv3RouteType2Cost BigMetric,
|
|
fsMIOspfv3RouteInterfaceIndex Integer32
|
|
}
|
|
|
|
fsMIOspfv3RouteDestType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type of fsMIOspfv3RouteDestType. Only
|
|
IPv6 addresses are expected."
|
|
::= { fsMIOspfv3RoutingEntry 1 }
|
|
|
|
fsMIOspfv3RouteDest OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The Desitnation IPv6 Address of this route."
|
|
::= { fsMIOspfv3RoutingEntry 2 }
|
|
|
|
fsMIOspfv3RoutePfxLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Indicates the prefix length of the destination Address."
|
|
::= { fsMIOspfv3RoutingEntry 3 }
|
|
|
|
fsMIOspfv3RouteNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type offsMIOspfv3RouteNextHopType. Only
|
|
IPv6 addresses are expected."
|
|
::= { fsMIOspfv3RoutingEntry 4 }
|
|
|
|
fsMIOspfv3RouteNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Next Hop IPv6 Address for this route. For direct routes it has the
|
|
value ::0."
|
|
::= { fsMIOspfv3RoutingEntry 5 }
|
|
|
|
fsMIOspfv3RouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
intraArea (1),
|
|
interArea (2),
|
|
type1External (3),
|
|
type2External (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the route"
|
|
::= { fsMIOspfv3RoutingEntry 6 }
|
|
|
|
fsMIOspfv3RouteAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Area ID associated with the route "
|
|
::= { fsMIOspfv3RoutingEntry 7 }
|
|
|
|
fsMIOspfv3RouteCost OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" It is a Type 1 external metrics which is
|
|
expressed in the same units as OSPF interface
|
|
cost ie. in terms of the OSPF link state metric.
|
|
If Type1 and Type2 cost are present, Type1 external
|
|
metrics always take precedence."
|
|
::= { fsMIOspfv3RoutingEntry 8 }
|
|
|
|
fsMIOspfv3RouteType2Cost OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type 2 external metrics are configured with
|
|
the cost greater than any path internal to the AS.
|
|
Use of Type 2 external metrics assumes that routing
|
|
between AS is the major cost of routing a packet, and
|
|
eliminates the need for conversion of external costs to
|
|
internal link state metrics."
|
|
::= { fsMIOspfv3RoutingEntry 9 }
|
|
|
|
fsMIOspfv3RouteInterfaceIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Interface Index associated with the route"
|
|
::= { fsMIOspfv3RoutingEntry 10 }
|
|
|
|
|
|
-- AsExternalAggregation Table
|
|
|
|
fsMIOspfv3AsExternalAggregationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3AsExternalAggregationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether for the specified address range
|
|
Type-7/Type-5 LSA will be aggregated or not generated. "
|
|
::= { fsMIOspfv3 5 }
|
|
|
|
fsMIOspfv3AsExternalAggregationEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3AsExternalAggregationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supports configuration of Type-5,Type-7 Address Range specifying
|
|
whether for the configured range, Type-5,Type-7 LSA will be
|
|
generated or not, and if generated whether aggregation is performed. "
|
|
INDEX { fsMIStdOspfv3ContextId,
|
|
fsMIOspfv3AsExternalAggregationNetType,
|
|
fsMIOspfv3AsExternalAggregationNet,
|
|
fsMIOspfv3AsExternalAggregationPfxLength,
|
|
fsMIOspfv3AsExternalAggregationAreaId }
|
|
::= {fsMIOspfv3AsExternalAggregationTable 1 }
|
|
|
|
FsMIOspfv3AsExternalAggregationEntry ::=
|
|
SEQUENCE {
|
|
fsMIOspfv3AsExternalAggregationNetType
|
|
InetAddressType,
|
|
fsMIOspfv3AsExternalAggregationNet
|
|
InetAddress,
|
|
fsMIOspfv3AsExternalAggregationPfxLength
|
|
InetAddressPrefixLength,
|
|
fsMIOspfv3AsExternalAggregationAreaId
|
|
AreaID,
|
|
fsMIOspfv3AsExternalAggregationEffect
|
|
INTEGER,
|
|
fsMIOspfv3AsExternalAggregationTranslation
|
|
INTEGER,
|
|
fsMIOspfv3AsExternalAggregationStatus
|
|
RowStatus
|
|
}
|
|
|
|
fsMIOspfv3AsExternalAggregationNetType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type of fsMIOspfv3AsExternalAggregationNetType. Only
|
|
IPv6 addresses are expected."
|
|
::= { fsMIOspfv3AsExternalAggregationEntry 1 }
|
|
|
|
fsMIOspfv3AsExternalAggregationNet OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPv6 address of the Net indicated by
|
|
the range. "
|
|
::= { fsMIOspfv3AsExternalAggregationEntry 2 }
|
|
|
|
fsMIOspfv3AsExternalAggregationPfxLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix length that pertains to the
|
|
range. "
|
|
::= { fsMIOspfv3AsExternalAggregationEntry 3 }
|
|
|
|
fsMIOspfv3AsExternalAggregationAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Refer to description in fsMIOspfv3AsExternalAggregationEffect."
|
|
::= { fsMIOspfv3AsExternalAggregationEntry 4 }
|
|
|
|
|
|
fsMIOspfv3AsExternalAggregationEffect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
advertise (1),
|
|
doNotAdvertise (2),
|
|
allowAll (3),
|
|
denyAll (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Type-5/Type-7 will be aggregated or not
|
|
generated for the specified range.
|
|
When set to 'allowAll' (3) and associated areaId is 0.0.0.0
|
|
aggregated Type-5 are generated for the specified range. In
|
|
addition aggregated Type-7 are generated in all attached NSSA
|
|
areas, for the specified range.Value allowAll (3) is not valid
|
|
for areaId other than 0.0.0.0.
|
|
When set to 'denyAll' (4) neither Type-5 nor Type-7 will be
|
|
generated for the specified range. Value denyAll (4) is not
|
|
valid for areaID other than 0.0.0.0.
|
|
When set to 'advertise' (1) and associated areaId is 0.0.0.0,
|
|
aggregated Type-5 LSA is generated and all the NSSA LSAs falling
|
|
in this address range are flushed out and no aggregated LSA of this
|
|
address range is generated for NSSA Areas.Otherwise, if associated
|
|
area-id is x.x.x.x (other than 0.0.0.0) aggregated Type-7 LSA is
|
|
generated in NSSA area x.x.x.x.
|
|
When set to 'doNotAdvertise' (2) and associated area-id is 0.0.0.0,
|
|
Type-5 LSA is not generated for the specified range, while all
|
|
the NSSA LSA falling in this range is flushed out and aggregated
|
|
Type-7 NSSA LSA of this address range is generated in all attached
|
|
NSSA areas.Otherwise, if associated area-id is x.x.x.x(other than 0.0.0.0),
|
|
Type-7 are not generated in NSSA area x.x.x.x for the specified range. "
|
|
DEFVAL { advertise }
|
|
::= { fsMIOspfv3AsExternalAggregationEntry 5 }
|
|
|
|
fsMIOspfv3AsExternalAggregationTranslation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This when set to enabled, P Bit is set in
|
|
the generated Type-7 LSA. When set disabled
|
|
P Bit is clear in the generated Type-7 LSA
|
|
for the range. "
|
|
DEFVAL { enabled }
|
|
::= { fsMIOspfv3AsExternalAggregationEntry 6 }
|
|
|
|
fsMIOspfv3AsExternalAggregationStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable displays the status of the en-
|
|
try. Setting it to 'invalid' has the effect of
|
|
rendering it inoperative."
|
|
::= { fsMIOspfv3AsExternalAggregationEntry 7 }
|
|
|
|
|
|
-- ABR/ASBR Routes Table
|
|
|
|
fsMIOspfv3BRRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3BRRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of routing information."
|
|
::= { fsMIOspfv3 6 }
|
|
|
|
fsMIOspfv3BRRouteEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3BRRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single route."
|
|
INDEX { fsMIStdOspfv3ContextId,
|
|
fsMIOspfv3BRRouteDest,
|
|
fsMIOspfv3BRRouteNextHopType,
|
|
fsMIOspfv3BRRouteNextHop,
|
|
fsMIOspfv3BRRouteDestType}
|
|
::= { fsMIOspfv3BRRouteTable 1 }
|
|
|
|
FsMIOspfv3BRRouteEntry ::= SEQUENCE {
|
|
fsMIOspfv3BRRouteDest IpAddress,
|
|
fsMIOspfv3BRRouteNextHopType InetAddressType,
|
|
fsMIOspfv3BRRouteNextHop InetAddress,
|
|
fsMIOspfv3BRRouteDestType INTEGER,
|
|
fsMIOspfv3BRRouteType INTEGER,
|
|
fsMIOspfv3BRRouteAreaId AreaID,
|
|
fsMIOspfv3BRRouteCost BigMetric,
|
|
fsMIOspfv3BRRouteInterfaceIndex InterfaceIndex
|
|
}
|
|
|
|
fsMIOspfv3BRRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Router Id of the destination router.
|
|
ABR/ASBR entries will have Router Id as
|
|
the destination network Id "
|
|
::= { fsMIOspfv3BRRouteEntry 1 }
|
|
|
|
fsMIOspfv3BRRouteNextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type of fsMIOspfv3BRRouteNextHopType. Only
|
|
IPv6 addresses are expected."
|
|
::= { fsMIOspfv3BRRouteEntry 2 }
|
|
|
|
fsMIOspfv3BRRouteNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Next Hop IPv6 Address for this route. For direct
|
|
routes it has the value ::0."
|
|
::= { fsMIOspfv3BRRouteEntry 3 }
|
|
|
|
fsMIOspfv3BRRouteDestType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
areaBorder (2),
|
|
asBoundary (3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of the route. The route can be ABR route
|
|
entry or ASBR route entry "
|
|
::= { fsMIOspfv3BRRouteEntry 4 }
|
|
|
|
fsMIOspfv3BRRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
intraArea (1),
|
|
interArea (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of the route "
|
|
::= { fsMIOspfv3BRRouteEntry 5 }
|
|
|
|
fsMIOspfv3BRRouteAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Area ID associated with the route "
|
|
::= { fsMIOspfv3BRRouteEntry 6 }
|
|
|
|
fsMIOspfv3BRRouteCost OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The cost associated with the route "
|
|
::= { fsMIOspfv3BRRouteEntry 7 }
|
|
|
|
fsMIOspfv3BRRouteInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Interface Index associated with the route "
|
|
::= { fsMIOspfv3BRRouteEntry 8 }
|
|
|
|
-- Redistribution configuration table. Attributes configured for this
|
|
-- table will be applied during redistribution.
|
|
|
|
fsMIOspfv3RedistRouteCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3RedistRouteCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing the configuration of Metric Cost and Route
|
|
Type information to be applied to the routes learnt from the RTM."
|
|
::= { fsMIOspfv3 7 }
|
|
|
|
fsMIOspfv3RedistRouteCfgEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3RedistRouteCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the configuration of single route entry."
|
|
INDEX { fsMIStdOspfv3ContextId,
|
|
fsMIOspfv3RedistRouteDestType,
|
|
fsMIOspfv3RedistRouteDest,
|
|
fsMIOspfv3RedistRoutePfxLength }
|
|
::= { fsMIOspfv3RedistRouteCfgTable 1 }
|
|
|
|
FsMIOspfv3RedistRouteCfgEntry ::= SEQUENCE {
|
|
fsMIOspfv3RedistRouteDestType InetAddressType,
|
|
fsMIOspfv3RedistRouteDest InetAddress,
|
|
fsMIOspfv3RedistRoutePfxLength InetAddressPrefixLength,
|
|
fsMIOspfv3RedistRouteMetric BigMetric,
|
|
fsMIOspfv3RedistRouteMetricType INTEGER,
|
|
fsMIOspfv3RedistRouteTagType INTEGER,
|
|
fsMIOspfv3RedistRouteTag Integer32,
|
|
fsMIOspfv3RedistRouteStatus RowStatus
|
|
}
|
|
|
|
fsMIOspfv3RedistRouteDestType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prefix type of fsMIOspfv3RedistRouteDestType. Only
|
|
IPv6 addresses are expected."
|
|
::= { fsMIOspfv3RedistRouteCfgEntry 1 }
|
|
|
|
fsMIOspfv3RedistRouteDest OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPv6 Address of the Destination route."
|
|
::= { fsMIOspfv3RedistRouteCfgEntry 2 }
|
|
|
|
fsMIOspfv3RedistRoutePfxLength OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Prefix Length of the Destination route."
|
|
::= { fsMIOspfv3RedistRouteCfgEntry 3 }
|
|
|
|
fsMIOspfv3RedistRouteMetric OBJECT-TYPE
|
|
SYNTAX BigMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metric value applied to the route before it is adv. into the
|
|
OSPFv3 Domain."
|
|
DEFVAL { 10 }
|
|
::= { fsMIOspfv3RedistRouteCfgEntry 4 }
|
|
|
|
fsMIOspfv3RedistRouteMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type1External (3),
|
|
type2External (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Metric Type applied to the route before it is adv. into the
|
|
OSPFv3 Domain"
|
|
DEFVAL { type2External }
|
|
::= { fsMIOspfv3RedistRouteCfgEntry 5 }
|
|
|
|
fsMIOspfv3RedistRouteTagType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual (1),
|
|
automatic (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Tag Type MIB object describes whether Tags will be
|
|
automatically generated or will be manually configured.
|
|
If tags are manually configured , the fsMIOspfv3RedistRouteTag
|
|
MIB has to be set with the Tag value needed."
|
|
DEFVAL { manual }
|
|
::= { fsMIOspfv3RedistRouteCfgEntry 6 }
|
|
|
|
fsMIOspfv3RedistRouteTag OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Route Tag in case the user configures a Manual option for
|
|
the tags."
|
|
DEFVAL { 0 }
|
|
::= { fsMIOspfv3RedistRouteCfgEntry 7 }
|
|
|
|
fsMIOspfv3RedistRouteStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable dispalys the status of the entry.Setting it to
|
|
'invalid' has the effect of rendering it inoperative."
|
|
::= { fsMIOspfv3RedistRouteCfgEntry 8 }
|
|
|
|
|
|
-- RRD OBJECT DEFINITION BEGIN
|
|
|
|
fsMIOspfv3RRDGroup OBJECT IDENTIFIER ::= { fsMIOspfv3 8 }
|
|
|
|
fsMIOspfv3RRDGeneralGroup OBJECT IDENTIFIER ::= { fsMIOspfv3RRDGroup 1}
|
|
|
|
-- OSPF RRDRoute Table.
|
|
|
|
fsMIOspfv3RRDRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3RRDRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Describes RRDRoute Entry "
|
|
::= { fsMIOspfv3RRDGeneralGroup 1 }
|
|
|
|
fsMIOspfv3RRDRouteEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3RRDRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Information describing the RRDRoute "
|
|
AUGMENTS { fsMIStdOspfv3Entry }
|
|
::= { fsMIOspfv3RRDRouteTable 1 }
|
|
|
|
FsMIOspfv3RRDRouteEntry ::= SEQUENCE {
|
|
fsMIOspfv3RRDStatus
|
|
Status,
|
|
fsMIOspfv3RRDSrcProtoMask
|
|
Integer32,
|
|
fsMIOspfv3RRDRouteMapName
|
|
OCTET STRING
|
|
}
|
|
fsMIOspfv3RRDStatus OBJECT-TYPE
|
|
SYNTAX Status
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This MIB object enables/disables OSPFv3 to participate in Route
|
|
Redistribution. If set to enabled, OSPFv3 will start advertising
|
|
the routes learned by other protocols. If set to disabled, OSPFv3
|
|
will stop redisbution of routes. However, OSPFv3 will continue
|
|
updating the Common Routing Table using the queue interface."
|
|
DEFVAL { disabled }
|
|
::= { fsMIOspfv3RRDRouteEntry 1 }
|
|
|
|
fsMIOspfv3RRDSrcProtoMask OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bit mask of source protocols from which routes are
|
|
imported to OSPFv3.
|
|
|
|
Bit 1, if set, indicates that local routes are
|
|
redistributed into OSPFv3. (value = 2)
|
|
if reset, indicates that local routes are not
|
|
redistributed into OSPFv3.
|
|
|
|
Bit 2, if set, indicates that static routes are
|
|
redistributed into OSPFv3. (value = 4)
|
|
if reset, indicates that static routes are not
|
|
redistributed into OSPFv3.
|
|
|
|
Bit 4, if set, indicates that routes from RIP are
|
|
redistributed into OSPFv3. (value = 16)
|
|
if reset, indicates that routes from RIP are not
|
|
redistributed into OSPFv3.
|
|
|
|
Bit 6, if set, indicates that routes from BGP are
|
|
redistributed into OSPFv3. (value = 64)
|
|
if reset, indicates that routes from BGP are not
|
|
redistributed into OSPFv3.
|
|
|
|
Other bits are reserved for future use."
|
|
DEFVAL { 0 }
|
|
::= { fsMIOspfv3RRDRouteEntry 2 }
|
|
|
|
fsMIOspfv3RRDRouteMapName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Name Identifies the specified route-map
|
|
in the list of route-maps."
|
|
::= { fsMIOspfv3RRDRouteEntry 3 }
|
|
|
|
-- TABLE_END fsMIOspfv3RRDGeneralGroup
|
|
|
|
-- FILTERING OBJECT DEFINITION BEGIN
|
|
|
|
fsMIOspfv3DistInOutRouteMap OBJECT IDENTIFIER ::= { fsMIOspfv3 9 }
|
|
|
|
fsMIOspfv3DistInOutRouteMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3DistInOutRouteMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table describing the configuration of filtering for route map."
|
|
::= { fsMIOspfv3DistInOutRouteMap 1 }
|
|
|
|
fsMIOspfv3DistInOutRouteMapEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3DistInOutRouteMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the filtering configuration of single entry."
|
|
INDEX {fsMIStdOspfv3ContextId,
|
|
fsMIOspfv3DistInOutRouteMapName,
|
|
fsMIOspfv3DistInOutRouteMapType}
|
|
::= { fsMIOspfv3DistInOutRouteMapTable 1 }
|
|
|
|
FsMIOspfv3DistInOutRouteMapEntry ::= SEQUENCE {
|
|
fsMIOspfv3DistInOutRouteMapName DisplayString,
|
|
fsMIOspfv3DistInOutRouteMapType Integer32,
|
|
fsMIOspfv3DistInOutRouteMapValue Integer32,
|
|
fsMIOspfv3DistInOutRouteMapRowStatus RowStatus
|
|
}
|
|
|
|
fsMIOspfv3DistInOutRouteMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Route map name."
|
|
::= { fsMIOspfv3DistInOutRouteMapEntry 1 }
|
|
|
|
fsMIOspfv3DistInOutRouteMapType OBJECT-TYPE
|
|
SYNTAX Integer32(1..3)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of route map to indicate the route map is for
|
|
distribute in or for distribute out or for distance.
|
|
1 - distance
|
|
2 - distribute in
|
|
3 - distribute out"
|
|
::= { fsMIOspfv3DistInOutRouteMapEntry 2 }
|
|
|
|
fsMIOspfv3DistInOutRouteMapValue OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Distance value ( this will be unused for distribute list )"
|
|
::= { fsMIOspfv3DistInOutRouteMapEntry 3 }
|
|
|
|
fsMIOspfv3DistInOutRouteMapRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { fsMIOspfv3DistInOutRouteMapEntry 4 }
|
|
|
|
-- FILTERING OBJECT DEFINITION END
|
|
|
|
-- PREFERENCE OBJECT DEFINITION BEGIN
|
|
|
|
fsMIOspfv3PreferenceGroup OBJECT IDENTIFIER ::= { fsMIOspfv3 10 }
|
|
|
|
fsMIOspfv3PreferenceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3PreferenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Describes RRDRoute Entry "
|
|
::= { fsMIOspfv3PreferenceGroup 1 }
|
|
|
|
fsMIOspfv3PreferenceEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3PreferenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Information describing the RRDRoute "
|
|
AUGMENTS { fsMIStdOspfv3Entry }
|
|
::= { fsMIOspfv3PreferenceTable 1 }
|
|
|
|
FsMIOspfv3PreferenceEntry ::= SEQUENCE {
|
|
fsMIOspfv3PreferenceValue
|
|
Integer32
|
|
}
|
|
|
|
fsMIOspfv3PreferenceValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Preference value for OSPFv3 routes. Use '0' to set default value"
|
|
DEFVAL { 0 }
|
|
::= { fsMIOspfv3PreferenceEntry 1 }
|
|
|
|
-- PREFERENCE OBJECT DEFINITION END
|
|
|
|
-- MI OSPFV3 BFD NEIGHBOR OBJECT DEFINITION BEGIN
|
|
|
|
fsMIOspfv3NeighborBfdGroup OBJECT IDENTIFIER ::= { fsMIOspfv3 11 }
|
|
|
|
fsMIOspfv3NeighborBfdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3NeighborBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This table Contains neighbor entry for Bfd "
|
|
::= { fsMIOspfv3NeighborBfdGroup 1 }
|
|
|
|
fsMIOspfv3NeighborBfdEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3NeighborBfdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This entry contains information describing Bfd neighbor state "
|
|
AUGMENTS { fsMIStdOspfv3NbrEntry }
|
|
::= { fsMIOspfv3NeighborBfdTable 1 }
|
|
|
|
FsMIOspfv3NeighborBfdEntry ::= SEQUENCE {
|
|
fsMIOspfv3NbrBfdState INTEGER
|
|
}
|
|
|
|
fsMIOspfv3NbrBfdState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the Neighbor Bfd state. It is a read-only object.
|
|
It is be enabled internally only when BFD is
|
|
enabled for monitoring this neighbor IP path."
|
|
::= { fsMIOspfv3NeighborBfdEntry 1 }
|
|
|
|
-- MI OSPFV3 BFD NEIGHBOR OBJECT DEFINITION END
|
|
-- Future OSPF-V3 Interface Authentication Table
|
|
|
|
fsMIOspfv3IfAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3IfAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OSPF-V3 Interface Authentication Table describes the parameters
|
|
required for cryptographic Authentication."
|
|
::= { fsMIOspfv3 12 }
|
|
|
|
fsMIOspfv3IfAuthEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3IfAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes one Authentication Key from the viewpoint of OSPF-V3."
|
|
INDEX { fsMIStdOspfv3ContextId, fsMIOspfv3IfAuthIfIndex, fsMIOspfv3IfAuthKeyId}
|
|
::= { fsMIOspfv3IfAuthTable 1 }
|
|
|
|
FsMIOspfv3IfAuthEntry ::= SEQUENCE {
|
|
fsMIOspfv3IfAuthIfIndex InterfaceIndex,
|
|
fsMIOspfv3IfAuthKeyId Integer32,
|
|
fsMIOspfv3IfAuthKey OCTET STRING,
|
|
fsMIOspfv3IfAuthKeyStartAccept DateAndTime,
|
|
fsMIOspfv3IfAuthKeyStartGenerate DateAndTime,
|
|
fsMIOspfv3IfAuthKeyStopGenerate DateAndTime,
|
|
fsMIOspfv3IfAuthKeyStopAccept DateAndTime,
|
|
fsMIOspfv3IfAuthKeyStatus RowStatus
|
|
}
|
|
|
|
fsMIOspfv3IfAuthIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interface index of OSPFv3 interface.
|
|
It corresponds to the interface index of the
|
|
IPv6 interface on which OSPFv3 is configured."
|
|
::= { fsMIOspfv3IfAuthEntry 1 }
|
|
|
|
fsMIOspfv3IfAuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object identifies the secret key used to create the
|
|
message digest appended to the OSPF-V3 packet."
|
|
::= { fsMIOspfv3IfAuthEntry 2 }
|
|
|
|
fsMIOspfv3IfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16)) -- Already existing Max Key size is carried over for all the Algorithms.
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object identifies the secret key which is used to create the
|
|
message digest appended to the OSPF-V3 packet."
|
|
::= { fsMIOspfv3IfAuthEntry 3 }
|
|
|
|
fsMIOspfv3IfAuthKeyStartAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router starts Accepting packets that have
|
|
been created with the key. If the value is not set, then it
|
|
will be taken as 0, The value 0 mapped to key creation time"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { fsMIOspfv3IfAuthEntry 4 }
|
|
|
|
fsMIOspfv3IfAuthKeyStartGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router starts generating packets that have
|
|
been created with the key. If the value is not set, then it
|
|
will be taken as 0, The value 0 mapped to key creation time"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { fsMIOspfv3IfAuthEntry 5 }
|
|
|
|
fsMIOspfv3IfAuthKeyStopGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router stops using the key for packets
|
|
generation. If the value is not set, then it will be taken
|
|
as infinite and displayed as 0 example,
|
|
Tuesday May 26, 2015 at 1:30 PM should be
|
|
configured as 26-MAY-2015,13:30"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { fsMIOspfv3IfAuthEntry 6 }
|
|
|
|
fsMIOspfv3IfAuthKeyStopAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router stops using the key for packets
|
|
Verification. If the value is not set, then it will be taken
|
|
as infinite and displayed as 0 example,
|
|
Tuesday May 26, 2015 at 1:30 PM should be
|
|
configured as 26-MAY-2015,13:30"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { fsMIOspfv3IfAuthEntry 7 }
|
|
|
|
fsMIOspfv3IfAuthKeyStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the status of the key."
|
|
::= { fsMIOspfv3IfAuthEntry 8 }
|
|
|
|
-- Future OSPF-V3 Virtual Interface Authentication Table
|
|
|
|
fsMIOspfv3VirtIfAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3VirtIfAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OSPF-V3 Interface Authentication Table describes the parameters
|
|
required for cryptographic Authentication."
|
|
::= { fsMIOspfv3 13 }
|
|
|
|
fsMIOspfv3VirtIfAuthEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3VirtIfAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes entry of one
|
|
Authentication Key from the viewpoint of OSPF-V3."
|
|
INDEX {fsMIStdOspfv3ContextId, fsMIOspfv3VirtIfAuthAreaId,fsMIOspfv3VirtIfAuthNeighbor,
|
|
fsMIOspfv3VirtIfAuthKeyId}
|
|
::= { fsMIOspfv3VirtIfAuthTable 1 }
|
|
|
|
FsMIOspfv3VirtIfAuthEntry ::= SEQUENCE {
|
|
fsMIOspfv3VirtIfAuthAreaId AreaID,
|
|
fsMIOspfv3VirtIfAuthNeighbor RouterID,
|
|
fsMIOspfv3VirtIfAuthKeyId Integer32,
|
|
fsMIOspfv3VirtIfAuthKey OCTET STRING,
|
|
fsMIOspfv3VirtIfAuthKeyStartAccept DateAndTime,
|
|
fsMIOspfv3VirtIfAuthKeyStartGenerate DateAndTime,
|
|
fsMIOspfv3VirtIfAuthKeyStopGenerate DateAndTime,
|
|
fsMIOspfv3VirtIfAuthKeyStopAccept DateAndTime,
|
|
fsMIOspfv3VirtIfAuthKeyStatus RowStatus
|
|
}
|
|
|
|
fsMIOspfv3VirtIfAuthAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the transit area that the virtual link
|
|
traverses. By definition, this should not be 0.0.0.0."
|
|
::= { fsMIOspfv3VirtIfAuthEntry 1 }
|
|
|
|
fsMIOspfv3VirtIfAuthNeighbor OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the Router ID of the Virtual Neighbor."
|
|
::= { fsMIOspfv3VirtIfAuthEntry 2 }
|
|
|
|
fsMIOspfv3VirtIfAuthKeyId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object identifies the secret key used to create the
|
|
message digest appended to the OSPF-V3 packet."
|
|
::= { fsMIOspfv3VirtIfAuthEntry 3 }
|
|
|
|
fsMIOspfv3VirtIfAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16)) -- Already existing Max Key size is carried over for all the Algorithms.
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This object specifies the secret key which is used to create the
|
|
message digest appended to the OSPF-V3 packet."
|
|
::= { fsMIOspfv3VirtIfAuthEntry 4 }
|
|
|
|
fsMIOspfv3VirtIfAuthKeyStartAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router starts generating packets that have
|
|
been created with the key. If the value is not set, then it
|
|
will be taken as 0, The value 0 mapped to key creation time"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { fsMIOspfv3VirtIfAuthEntry 5 }
|
|
|
|
fsMIOspfv3VirtIfAuthKeyStartGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router starts generating packets that have
|
|
been created with the key. If the value is not set, then it
|
|
will be taken as 0, The value 0 mapped to key creation time"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { fsMIOspfv3VirtIfAuthEntry 6 }
|
|
|
|
fsMIOspfv3VirtIfAuthKeyStopGenerate OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router stops using the key for packets
|
|
generation. If the value is not set, then it will be taken
|
|
as infinite and displayed as 0 example,
|
|
Tuesday May 26, 2015 at 1:30 PM should be
|
|
configured as 26-MAY-2015,13:30"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { fsMIOspfv3VirtIfAuthEntry 7 }
|
|
|
|
fsMIOspfv3VirtIfAuthKeyStopAccept OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time at which the router stops using the key for packets
|
|
Verification. If the value is not set, then it will be taken
|
|
as infinite and displayed as 2136-02-06,06:28:15,
|
|
DateTime equivalent to max value of UINT4.
|
|
For example, Tuesday May 26, 2015 at 1:30 PM should be
|
|
configured as 26-MAY-2015,13:30"
|
|
DEFVAL { "0000000000000000" }
|
|
::= { fsMIOspfv3VirtIfAuthEntry 8 }
|
|
|
|
fsMIOspfv3VirtIfAuthKeyStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the status of the key."
|
|
::= {fsMIOspfv3VirtIfAuthEntry 9 }
|
|
|
|
-- CRYPTO AUTH VIRTUAL INTERFACE START
|
|
fsMIOspfv3VirtIfCryptoAuthTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FsMIOspfv3VirtIfCryptoAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table holds the crypto authentication type."
|
|
::= { fsMIOspfv3 14 }
|
|
fsMIOspfv3VirtIfCryptoAuthEntry OBJECT-TYPE
|
|
SYNTAX FsMIOspfv3VirtIfCryptoAuthEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the entry of the cryptographic authentication."
|
|
AUGMENTS { fsMIStdOspfv3VirtIfEntry }
|
|
::= { fsMIOspfv3VirtIfCryptoAuthTable 1 }
|
|
FsMIOspfv3VirtIfCryptoAuthEntry ::=
|
|
SEQUENCE {
|
|
fsMIOspfv3VirtIfCryptoAuthType
|
|
INTEGER,
|
|
fsMIOspfv3VirtIfCryptoAuthMode
|
|
INTEGER
|
|
|
|
}
|
|
fsMIOspfv3VirtIfCryptoAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sha1(1),
|
|
sha256(3),
|
|
sha384(4),
|
|
sha512(5),
|
|
none(6)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the SHA crypto authentication type to be
|
|
used on the interface"
|
|
|
|
DEFVAL { none }
|
|
::= { fsMIOspfv3VirtIfCryptoAuthEntry 1 }
|
|
|
|
fsMIOspfv3VirtIfCryptoAuthMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
full(1),
|
|
transition(2),
|
|
none(3)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the crypto authentication mode to be used on the interface
|
|
for setting transition"
|
|
|
|
DEFVAL { none }
|
|
::= { fsMIOspfv3VirtIfCryptoAuthEntry 2 }
|
|
|
|
-- CRYPTO AUTH VIRTUAL INTERFACE END
|
|
|
|
-- Trap Notification types for Graceful restart
|
|
|
|
fsMIOspfv3Traps OBJECT IDENTIFIER ::= { fsMIOspfv3Notification 0 }
|
|
fsMIOspfv3TrapObject OBJECT IDENTIFIER ::= { fsMIOspfv3Notification 1 }
|
|
|
|
-- Trap objects for index variable to be used in notifications
|
|
|
|
fsMIOspfv3TrapNbrIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local link ID of the link over which the
|
|
neighbor can be reached. This is used for Trap"
|
|
::= { fsMIOspfv3TrapObject 1 }
|
|
|
|
fsMIOspfv3TrapVirtNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer uniquely identifying the
|
|
neighboring router in the Autonomous System.
|
|
This is used for Trap"
|
|
::= { fsMIOspfv3TrapObject 2 }
|
|
|
|
fsMIOspfv3TrapNbrRtrId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit integer (represented as a type IpAd-
|
|
dress) uniquely identifying the neighboring
|
|
router in the Autonomous System.
|
|
This is used for Trap"
|
|
::= { fsMIOspfv3TrapObject 3 }
|
|
|
|
fsMIOspfv3TrapVirtNbrArea OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Transit Area Identifier. This is used for Trap"
|
|
::= { fsMIOspfv3TrapObject 4 }
|
|
|
|
fsMIOspfv3TrapBulkUpdAbortReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
memAllocFailed(2),
|
|
sendFailed(3),
|
|
processFailed(4)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the failure of particular Bulk Update abort."
|
|
::= { fsMIOspfv3TrapObject 5 }
|
|
|
|
|
|
|
|
-- END
|
|
|
|
fsMIOspfv3RestartStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsMIStdOspfv3RouterId, -- The originator of the trap
|
|
fsMIStdOspfv3RestartStatus,
|
|
fsMIStdOspfv3RestartInterval,
|
|
fsMIStdOspfv3RestartExitReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An fsMIOspfv3RestartStatusChange trap signifies that
|
|
there has been a change in the graceful restart
|
|
state for the router. This trap should be
|
|
generated when the router restart status
|
|
changes."
|
|
::= { fsMIOspfv3Traps 1 }
|
|
|
|
fsMIOspfv3NbrRestartHelperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsMIStdOspfv3RouterId, -- The originator of the trap
|
|
fsMIOspfv3TrapNbrIfIndex,
|
|
fsMIOspfv3TrapNbrRtrId,
|
|
fsMIStdOspfv3NbrRestartHelperStatus,
|
|
fsMIStdOspfv3NbrRestartHelperAge,
|
|
fsMIStdOspfv3NbrRestartHelperExitReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An fsMIOspfv3NbrRestartHelperStatusChange trap signifies that
|
|
there has been a change in the graceful restart
|
|
helper state for the neighbor. This trap should be
|
|
generated when the neighbor restart helper status
|
|
transitions for a neighbor."
|
|
::= { fsMIOspfv3Traps 2 }
|
|
|
|
fsMIOspfv3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsMIStdOspfv3RouterId, -- The originator of the trap
|
|
fsMIOspfv3TrapVirtNbrArea,
|
|
fsMIOspfv3TrapVirtNbrRtrId,
|
|
fsMIStdOspfv3VirtNbrRestartHelperStatus,
|
|
fsMIStdOspfv3VirtNbrRestartHelperAge,
|
|
fsMIStdOspfv3VirtNbrRestartHelperExitReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An fsMIOspfv3VirtNbrRestartHelperStatusChange trap signifies
|
|
that there has been a change in the graceful restart
|
|
helper state for the virtual neighbor. This trap should
|
|
be generated when the virtual neighbor restart helper
|
|
status transitions for a virtual neighbor."
|
|
::= { fsMIOspfv3Traps 3 }
|
|
|
|
fsMIOspfv3HotStandbyStateChgTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsMIStdOspfv3RouterId, -- The originator of the trap
|
|
fsMIOspfv3HotStandbyState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent to the management entity whenever
|
|
there is a state change in the OSPFv3 hotstandby Module"
|
|
|
|
::= {fsMIOspfv3Traps 4}
|
|
|
|
fsMIOspfv3HotStandbyBulkUpdAbortTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsMIStdOspfv3RouterId, -- The originator of the trap
|
|
fsMIOspfv3DynamicBulkUpdStatus,
|
|
fsMIOspfv3TrapBulkUpdAbortReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent to the management entity whenever
|
|
there is a Bulk Update Abort "
|
|
|
|
::= {fsMIOspfv3Traps 5}
|
|
|
|
fsMIOspfv3AuthSequenceNumWrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
fsMIStdOspfv3RouterId -- The originator of the trap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a notification that is sent to the management entity whenever
|
|
the Authentication Trailer sequence number is wrapped"
|
|
::= {fsMIOspfv3Traps 6}
|
|
|
|
-- End of Trap notifications
|
|
|
|
END
|
|
|
|
|