1759 lines
55 KiB
Plaintext
1759 lines
55 KiB
Plaintext
-- *****************************************************************
|
|
-- AETHRA-MIB: Aethra Telecommunications Enterprise MIB file
|
|
-- ATOS Compatible Version: 5.6 and previous, minimum version for all features is 5.6.14
|
|
--
|
|
-- Copyright (c) 2012 by
|
|
-- A TLC srl - Aethra Telecommunications
|
|
-- Legal Office: Via G.B. Martini,2 - 00198 ROMA - ITALY
|
|
-- Operating Office: Via 1° Maggio, 26 - 60131 ANCONA - ITALY
|
|
-- Phone: +39 071 250 651
|
|
-- E-Mail: info@aethra.com
|
|
--
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
AETHRA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
enterprises, IpAddress, Counter, Gauge
|
|
FROM RFC1155-SMI
|
|
DisplayString, PhysAddress, ifDescr, ifIndex
|
|
FROM RFC1213-MIB
|
|
IANAifType
|
|
FROM IANAifType-MIB;
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
-- Prefix: iso.org.dod.internet.private.enterprise (1.3.6.1.4.1)
|
|
--
|
|
|
|
aethra OBJECT IDENTIFIER ::= { enterprises 7745 }
|
|
|
|
atosnt OBJECT IDENTIFIER ::= { aethra 5 }
|
|
|
|
tools OBJECT IDENTIFIER ::= { atosnt 1 } -- Tools Node
|
|
|
|
system OBJECT IDENTIFIER ::= { atosnt 2 } -- System Node
|
|
|
|
dsl OBJECT IDENTIFIER ::= { atosnt 3 } -- DSL Node
|
|
|
|
voip OBJECT IDENTIFIER ::= { atosnt 4 } -- Voip Node
|
|
|
|
traps OBJECT IDENTIFIER ::= { atosnt 5 } -- Traps Node
|
|
|
|
ifc OBJECT IDENTIFIER ::= { atosnt 6 } -- Interfaces Node
|
|
|
|
|
|
|
|
fileTransfer OBJECT IDENTIFIER ::= { tools 1 } -- fileTransfer Node
|
|
|
|
fileTransferProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
ftp(2),
|
|
http(3),
|
|
file(4),
|
|
scp(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the protocol for file transfer command.
|
|
The protocol file(4) reads from a local disk for download command,
|
|
writes to a local disk for upload.
|
|
OID: 1.3.6.1.4.1.7745.5.1.1.1"
|
|
::= { fileTransfer 1 }
|
|
|
|
fileTransferFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name of the file to download or upload.
|
|
When using HTTP protocol set full url as fileTransferFileName.
|
|
OID: 1.3.6.1.4.1.7745.5.1.1.2"
|
|
::= { fileTransfer 2 }
|
|
|
|
fileTransferServerName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name or IP address of remote server
|
|
when using TFTP or FTP protocol. When not configured systemDefaultTftpServer
|
|
or systemDefaultFtpServer is used for the respective protocols.
|
|
OID: 1.3.6.1.4.1.7745.5.1.1.3"
|
|
::= { fileTransfer 3 }
|
|
|
|
fileTransferOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
firmware(1),
|
|
boot(2),
|
|
userconf(3),
|
|
logs(4),
|
|
package(5),
|
|
localfile(6),
|
|
welcome(7),
|
|
license(8),
|
|
certificate(9),
|
|
defaultconf(10),
|
|
bannerPre(11),
|
|
bannerPost(12)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the type of file you are downloading or uploading.
|
|
When not configured firmware type is used.
|
|
firmware(1) is the operating system file,
|
|
boot(2) is the system boot,
|
|
userconf(3) is the current system configuration file,
|
|
logs(4) is the logs file and is available only for upload command,
|
|
package(5) is bundle is a package that contains boot and os in a single file,
|
|
localfile(6) is any file you want to download or upload in the system,
|
|
welcome(7) is a text message displayed before access to system console by telnet or ssh,
|
|
license(8) is a license file to enable advanced system features,
|
|
certificate(9) is the custom certificate file for the security protocol system (SSL),
|
|
defaultconf(10) is the custom default configuration file,
|
|
bannerPre(10) is available only from version 5.6.11, is a custom pre login banner file,
|
|
bannerPost(10)is available only from version 5.6.11, is a custom post login banner file.
|
|
OID: 1.3.6.1.4.1.7745.5.1.1.4"
|
|
::= { fileTransfer 4 }
|
|
|
|
fileTransferStorageFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name of the local file when using file(4) protocol.
|
|
OID: 1.3.6.1.4.1.7745.5.1.1.5"
|
|
::= { fileTransfer 5 }
|
|
|
|
fileTransferExec OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
download(1),
|
|
upload(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to start download or upload.
|
|
OID: 1.3.6.1.4.1.7745.5.1.1.6"
|
|
::= { fileTransfer 6 }
|
|
|
|
fileTransferStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the current status of file transfer command.
|
|
OID: 1.3.6.1.4.1.7745.5.1.1.7"
|
|
::= { fileTransfer 7 }
|
|
|
|
|
|
ping OBJECT IDENTIFIER ::= { tools 2 } -- Ping Node
|
|
|
|
pingParameters OBJECT IDENTIFIER ::= { ping 1 } -- Ping Parameters Node
|
|
|
|
pingHost OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the host name or IP address to ping.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.1.1"
|
|
::= { pingParameters 1 }
|
|
|
|
pingSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8192)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the size of ping packet.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.1.2"
|
|
::= { pingParameters 2 }
|
|
|
|
pingTries OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the number of ping tries.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.1.3"
|
|
::= { pingParameters 3 }
|
|
|
|
pingTTL OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure ping TTL option.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.1.4"
|
|
::= { pingParameters 4 }
|
|
|
|
pingTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure ping response timeout (sec).
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.1.5"
|
|
::= { pingParameters 5 }
|
|
|
|
pingSource OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name or IP address of the ping source.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.1.6"
|
|
::= { pingParameters 6 }
|
|
|
|
pingStart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noaction(0),
|
|
start(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to start ping.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.1.7"
|
|
::= { pingParameters 7 }
|
|
|
|
pingStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the current status of ping command.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.1.8"
|
|
::= { pingParameters 8 }
|
|
|
|
pingStatistics OBJECT IDENTIFIER ::= { ping 2 } -- Ping Statistics Node
|
|
|
|
pingTXpacket OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the number of packets transmitted.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.2.1"
|
|
::= { pingStatistics 1 }
|
|
|
|
pingRXpacket OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the number of packets received.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.2.2"
|
|
::= { pingStatistics 2 }
|
|
|
|
pingLOSTpacket OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the number of packets losted.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.2.3"
|
|
::= { pingStatistics 3 }
|
|
|
|
pingMinRTT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the minimum Round Trip Time (RTT) value.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.2.4"
|
|
::= { pingStatistics 4 }
|
|
|
|
pingMaxRTT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the maximum Round Trip Time (RTT) value.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.2.5"
|
|
::= { pingStatistics 5 }
|
|
|
|
pingAvgRTT OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the average Round Trip Time (RTT) value.
|
|
OID: 1.3.6.1.4.1.7745.5.1.2.2.6"
|
|
::= { pingStatistics 6 }
|
|
|
|
-- System Parameters
|
|
|
|
systemLoglevel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the log level of the node system.
|
|
OID: 1.3.6.1.4.1.7745.5.2.1"
|
|
::= { system 1 }
|
|
|
|
systemDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure system description.
|
|
OID: 1.3.6.1.4.1.7745.5.2.2 "
|
|
::= { system 2 }
|
|
|
|
systemName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure system name, it's also used as network hostname.
|
|
OID: 1.3.6.1.4.1.7745.5.2.3"
|
|
::= { system 3 }
|
|
|
|
systemLocalDomain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure system local domain, it's also used as network workgroup.
|
|
OID: 1.3.6.1.4.1.7745.5.2.4"
|
|
::= { system 4 }
|
|
|
|
systemDefaultTftpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name or IP address for the default remote TFTP server.
|
|
OID: 1.3.6.1.4.1.7745.5.2.5"
|
|
::= { system 5 }
|
|
|
|
systemTftpLocalAdd OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name or the local IP address used by the TFTP client.
|
|
OID: 1.3.6.1.4.1.7745.5.2.6"
|
|
::= { system 6 }
|
|
|
|
systemDefaultFtpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name or IP address and port for the default remote FTP server.
|
|
OID: 1.3.6.1.4.1.7745.5.2.7"
|
|
::= { system 7 }
|
|
|
|
systemFtpLocalAdd OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name or the local IP address used by the FTP client.
|
|
OID: 1.3.6.1.4.1.7745.5.2.8"
|
|
::= { system 8 }
|
|
|
|
systemFtpUsername OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the username for the default remote FTP server.
|
|
OID: 1.3.6.1.4.1.7745.5.2.9"
|
|
::= { system 9 }
|
|
|
|
systemFtpPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the password for the default remote FTP server.
|
|
OID: 1.3.6.1.4.1.7745.5.2.10"
|
|
::= { system 10 }
|
|
|
|
systemAAAProfile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the AAA profile used by the system.
|
|
OID: 1.3.6.1.4.1.7745.5.2.11 "
|
|
::= { system 11 }
|
|
|
|
systemAAALogTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..300)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the AAA login timeout.
|
|
OID: 1.3.6.1.4.1.7745.5.2.12"
|
|
::= { system 12 }
|
|
|
|
systemBackupAuth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
on(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to enable the backup authentication system.
|
|
OID: 1.3.6.1.4.1.7745.5.2.13"
|
|
::= { system 13 }
|
|
|
|
systemScrollLine OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to enable the system scroll line.
|
|
OID: 1.3.6.1.4.1.7745.5.2.14"
|
|
::= { system 14 }
|
|
|
|
systemKernelLogs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
on(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to enable the system kernel logs
|
|
OID: 1.3.6.1.4.1.7745.5.2.15"
|
|
::= { system 15 }
|
|
|
|
systemCryptedPassword OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
on(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to enable the system crypted password.
|
|
OID: 1.3.6.1.4.1.7745.5.2.16"
|
|
::= { system 16 }
|
|
|
|
systemSave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
save(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to save current configuration.
|
|
OID: 1.3.6.1.4.1.7745.5.2.17"
|
|
::= { system 17 }
|
|
|
|
systemRestart OBJECT IDENTIFIER ::= { system 18 } -- Restart Node
|
|
|
|
restartOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
saveConf(0),
|
|
notSaveConf(1),
|
|
restoreDefaultConf(2),
|
|
restoreFactoryDefault(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to choose restart command option.
|
|
saveConf(0) saving configuration changes before restart the system,
|
|
notSaveConf(1) restart the system without saving configuration changes,
|
|
restoreDefaultConf(2) restart the system with the default configuration,
|
|
restoreFactoryDefault(3) available only from version 5.6.14,
|
|
restart the system with the factory default.
|
|
OID: 1.3.6.1.4.1.7745.5.2.18.1"
|
|
::= { systemRestart 1 }
|
|
|
|
restartDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..30)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure restart timeout (sec).
|
|
OID: 1.3.6.1.4.1.7745.5.2.18.2"
|
|
::= { systemRestart 2 }
|
|
|
|
|
|
restartExec OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction(0),
|
|
restart(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to restart the system.
|
|
OID: 1.3.6.1.4.1.7745.5.2.18.3"
|
|
::= { systemRestart 3 }
|
|
|
|
restartStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the current status of restart command.
|
|
OID: OID: 1.3.6.1.4.1.7745.5.2.18.4"
|
|
::= { systemRestart 4 }
|
|
|
|
performance OBJECT IDENTIFIER ::= { system 19 } -- Performance Monitor Node
|
|
|
|
performanceCpuAvg1min OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the CPU average utilization in 1 minute (in %).
|
|
OID: 1.3.6.1.4.1.7745.5.2.19.1"
|
|
::= { performance 1 }
|
|
|
|
performanceCpuAvg5min OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the CPU average utilization in 5 minute (in %).
|
|
OID: 1.3.6.1.4.1.7745.5.2.19.2"
|
|
::= { performance 2 }
|
|
|
|
performanceCpuAvg15min OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the CPU average utilization in 15 minute (in %).
|
|
OID: 1.3.6.1.4.1.7745.5.2.19.3"
|
|
::= { performance 3 }
|
|
|
|
performanceDynMemLoad OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the usage of dynamic memory (in %).
|
|
OID: 1.3.6.1.4.1.7745.5.2.19.4"
|
|
::= { performance 4 }
|
|
|
|
performanceDynMemTotal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the total dynamic memory (in KBytes).
|
|
OID: 1.3.6.1.4.1.7745.5.2.19.5"
|
|
::= { performance 5 }
|
|
|
|
performanceDynMemFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the free dynamic memory (in KBytes).
|
|
OID: 1.3.6.1.4.1.7745.5.2.19.6"
|
|
::= { performance 6 }
|
|
|
|
systemDefaultScpServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the name or IP address and port for the default remote SCP server.
|
|
OID: 1.3.6.1.4.1.7745.5.2.20"
|
|
::= { system 20 }
|
|
|
|
systemScpUsername OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the username for the default remote SCP server.
|
|
OID: 1.3.6.1.4.1.7745.5.2.21"
|
|
::= { system 21 }
|
|
|
|
systemScpPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the password for the default remote SCP server.
|
|
OID: 1.3.6.1.4.1.7745.5.2.22"
|
|
::= { system 22 }
|
|
|
|
systemConsoleEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
on(1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to enable or disable serial console.
|
|
OID: 1.3.6.1.4.1.7745.5.2.23"
|
|
::= { system 23 }
|
|
|
|
systemLogMsgRate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2048)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure the maximum number of log messages per minute.
|
|
A value set to 0 (zero) is equivalent to unlimited.
|
|
OID: 1.3.6.1.4.1.7745.5.2.24"
|
|
::= { system 24 }
|
|
|
|
xdsl OBJECT IDENTIFIER ::= { dsl 1 } -- xDSL Node
|
|
|
|
xdslTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF XdslEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of xdsl interface entries.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1"
|
|
::= { xdsl 1 }
|
|
|
|
xdslEntry OBJECT-TYPE
|
|
SYNTAX XdslEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"OID: 1.3.6.1.4.1.7745.5.3.1.1.1"
|
|
INDEX { xdslIndex }
|
|
::= { xdslTable 1 }
|
|
|
|
XdslEntry ::=
|
|
SEQUENCE {
|
|
xdslIndex
|
|
INTEGER,
|
|
xdslLinkStatus
|
|
DisplayString,
|
|
xdslTc
|
|
DisplayString,
|
|
xdslUsAttenuation
|
|
INTEGER,
|
|
xdslDsAttenuation
|
|
INTEGER,
|
|
xdslUsNoiseMargin
|
|
INTEGER,
|
|
xdslDsNoiseMargin
|
|
INTEGER,
|
|
xdslUsCurrRate
|
|
INTEGER,
|
|
xdslDsCurrRate
|
|
INTEGER,
|
|
xdslModulationType
|
|
DisplayString,
|
|
xdslUsMaxTheorRate
|
|
INTEGER,
|
|
xdslDsMaxTheorRate
|
|
INTEGER,
|
|
xdslUsTotBytes
|
|
INTEGER,
|
|
xdslDsTotBytes
|
|
INTEGER,
|
|
xdslNeTotCrcErr
|
|
INTEGER,
|
|
xdslNeShowtimeCrcErr
|
|
INTEGER
|
|
}
|
|
|
|
xdslIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the index of the row.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.1"
|
|
::= { xdslEntry 1 }
|
|
|
|
xdslLinkStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the link status.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.2"
|
|
::= { xdslEntry 2 }
|
|
|
|
xdslTc OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link transmission convergence.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.3"
|
|
::= { xdslEntry 3 }
|
|
|
|
xdslUsAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link upstream attenuation (0.1 dB steps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.4"
|
|
::= { xdslEntry 4 }
|
|
|
|
xdslDsAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link downstream attenuation (0.1 dB steps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.5"
|
|
::= { xdslEntry 5 }
|
|
|
|
xdslUsNoiseMargin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link upstream noise margin (0.1 dB steps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.6"
|
|
::= { xdslEntry 6 }
|
|
|
|
xdslDsNoiseMargin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link downstream noise margin (0.1 dB steps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.7"
|
|
::= { xdslEntry 7 }
|
|
|
|
xdslUsCurrRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link upstream current rate (in Kbps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.8"
|
|
::= { xdslEntry 8 }
|
|
|
|
xdslDsCurrRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link downstream current rate (in Kbps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.9"
|
|
::= { xdslEntry 9 }
|
|
|
|
xdslModulationType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link modulation type.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.10"
|
|
::= { xdslEntry 10 }
|
|
|
|
xdslUsMaxTheorRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link upstream attainable max rate (in Kbps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.11"
|
|
::= { xdslEntry 11 }
|
|
|
|
xdslDsMaxTheorRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link downstream attainable max rate (in Kbps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.12"
|
|
::= { xdslEntry 12 }
|
|
|
|
xdslUsTotBytes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link upstream total bytes.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.13"
|
|
::= { xdslEntry 13 }
|
|
|
|
xdslDsTotBytes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link downstream total bytes.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.14"
|
|
::= { xdslEntry 14 }
|
|
|
|
xdslNeTotCrcErr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link near-end total CRC errors.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.15"
|
|
::= { xdslEntry 15 }
|
|
xdslNeShowtimeCrcErr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read link near-end last showtime CRC errors.
|
|
OID: 1.3.6.1.4.1.7745.5.3.1.1.1.16"
|
|
::= { xdslEntry 16 }
|
|
|
|
shdsl OBJECT IDENTIFIER ::= { dsl 2 } -- SHDSL Node
|
|
|
|
shdslTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ShdslEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of shdsl physical interface entries.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1"
|
|
::= { shdsl 1 }
|
|
|
|
shdslEntry OBJECT-TYPE
|
|
SYNTAX ShdslEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"OID: 1.3.6.1.4.1.7745.5.3.2.1.1"
|
|
INDEX { shdslIndex }
|
|
::= { shdslTable 1 }
|
|
|
|
ShdslEntry ::=
|
|
SEQUENCE {
|
|
shdslIndex
|
|
INTEGER,
|
|
shdslPhyStatus
|
|
DisplayString,
|
|
shdslTc
|
|
DisplayString,
|
|
shdslUsAttenuation
|
|
INTEGER,
|
|
shdslDsAttenuation
|
|
INTEGER,
|
|
shdslUsNoiseMargin
|
|
INTEGER,
|
|
shdslDsNoiseMargin
|
|
INTEGER,
|
|
shdslUsCurrRate
|
|
INTEGER,
|
|
shdslDsCurrRate
|
|
INTEGER,
|
|
shdslModulationType
|
|
DisplayString,
|
|
shdslUsMaxTheorRate
|
|
INTEGER,
|
|
shdslDsMaxTheorRate
|
|
INTEGER,
|
|
shdslUsTotBytes
|
|
INTEGER,
|
|
shdslDsTotBytes
|
|
INTEGER,
|
|
shdslNeTotCrcErr
|
|
INTEGER,
|
|
shdslNeShowtimeCrcErr
|
|
INTEGER,
|
|
shdslUsPower
|
|
INTEGER,
|
|
shdslDsPower
|
|
INTEGER
|
|
}
|
|
|
|
shdslIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the index of the row.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.1"
|
|
::= { shdslEntry 1 }
|
|
|
|
shdslPhyStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical status.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.2"
|
|
::= { shdslEntry 2 }
|
|
|
|
shdslTc OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical transmission convergence.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.3"
|
|
::= { shdslEntry 3 }
|
|
|
|
shdslUsAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical upstream attenuation (0.1 dB steps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.4"
|
|
::= { shdslEntry 4 }
|
|
|
|
shdslDsAttenuation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical downstream attenuation (0.1 dB steps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.5"
|
|
::= { shdslEntry 5 }
|
|
|
|
shdslUsNoiseMargin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical upstream noise margin (0.1 dB steps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.6"
|
|
::= { shdslEntry 6 }
|
|
|
|
shdslDsNoiseMargin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical downstream noise margin (0.1 dB steps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.7"
|
|
::= { shdslEntry 7 }
|
|
|
|
shdslUsCurrRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical upstream current rate (in Kbps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.8"
|
|
::= { shdslEntry 8 }
|
|
|
|
shdslDsCurrRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical downstream current rate (in Kbps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.9"
|
|
::= { shdslEntry 9 }
|
|
|
|
shdslModulationType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical modulation type.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.10"
|
|
::= { shdslEntry 10 }
|
|
|
|
shdslUsMaxTheorRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical upstream attainable max rate (in Kbps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.11"
|
|
::= { shdslEntry 11 }
|
|
|
|
shdslDsMaxTheorRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical downstream attainable max rate (in Kbps).
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.12"
|
|
::= { shdslEntry 12 }
|
|
|
|
shdslUsTotBytes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical upstream total bytes.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.13"
|
|
::= { shdslEntry 13 }
|
|
|
|
shdslDsTotBytes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical downstream total bytes.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.14"
|
|
::= { shdslEntry 14 }
|
|
|
|
shdslNeTotCrcErr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical near-end total CRC errors.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.15"
|
|
::= { shdslEntry 15 }
|
|
|
|
shdslNeShowtimeCrcErr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical near-end last showtime CRC errors.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.16"
|
|
::= { shdslEntry 16 }
|
|
|
|
shdslUsPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical Us Power.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.17"
|
|
::= { shdslEntry 17 }
|
|
|
|
shdslDsPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read physical Ds Power.
|
|
OID: 1.3.6.1.4.1.7745.5.3.2.1.1.18"
|
|
::= { shdslEntry 18 }
|
|
|
|
trunk OBJECT IDENTIFIER ::= { voip 1 } -- Voip Trunk
|
|
|
|
trunkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TrunkEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of configured voip SIP trunk.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1"
|
|
::= { trunk 1 }
|
|
|
|
trunkEntry OBJECT-TYPE
|
|
SYNTAX TrunkEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"OID: 1.3.6.1.4.1.7745.5.4.1.1.1"
|
|
INDEX { trunkIndex }
|
|
::= { trunkTable 1 }
|
|
|
|
TrunkEntry ::=
|
|
SEQUENCE {
|
|
trunkIndex
|
|
INTEGER,
|
|
trunkName
|
|
DisplayString,
|
|
trunkType
|
|
DisplayString,
|
|
trunkEnable
|
|
INTEGER,
|
|
trunkDescription
|
|
DisplayString,
|
|
trunkUserName
|
|
DisplayString,
|
|
trunkRegHost
|
|
DisplayString,
|
|
trunkProxyHost
|
|
DisplayString,
|
|
trunkIfcStatus
|
|
DisplayString,
|
|
trunkRegStatus
|
|
DisplayString,
|
|
trunkMsgWait
|
|
DisplayString
|
|
}
|
|
|
|
trunkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the index of the row.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.1"
|
|
::= { trunkEntry 1 }
|
|
|
|
trunkName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk name.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.2"
|
|
::= { trunkEntry 2 }
|
|
|
|
trunkType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk type.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.3"
|
|
::= { trunkEntry 3 }
|
|
|
|
trunkEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
registered(1),
|
|
unregistered(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk registration enable.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.4"
|
|
::= { trunkEntry 4 }
|
|
|
|
trunkDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk description.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.5"
|
|
::= { trunkEntry 5 }
|
|
|
|
trunkUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk username.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.6"
|
|
::= { trunkEntry 6 }
|
|
|
|
trunkRegHost OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk registar host.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.7"
|
|
::= { trunkEntry 7 }
|
|
|
|
trunkProxyHost OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk proxy host.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.8"
|
|
::= { trunkEntry 8 }
|
|
|
|
trunkIfcStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk interface status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.9"
|
|
::= { trunkEntry 9 }
|
|
|
|
trunkRegStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk registration status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.10"
|
|
::= { trunkEntry 10 }
|
|
|
|
trunkMsgWait OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk message wait status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.1.1.11"
|
|
::= { trunkEntry 11 }
|
|
|
|
|
|
trunkIsdnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TrunkIsdnEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of configured voip ISDN trunk.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.2"
|
|
::= { trunk 2 }
|
|
|
|
trunkIsdnEntry OBJECT-TYPE
|
|
SYNTAX TrunkIsdnEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"OID: 1.3.6.1.4.1.7745.5.4.1.2.1"
|
|
INDEX { trunkIsdnIndex }
|
|
::= { trunkIsdnTable 1 }
|
|
|
|
TrunkIsdnEntry ::=
|
|
SEQUENCE {
|
|
trunkIsdnIndex
|
|
INTEGER,
|
|
trunkIsdnName
|
|
DisplayString,
|
|
trunkIsdnType
|
|
DisplayString,
|
|
trunkIsdnEnable
|
|
INTEGER,
|
|
trunkIsdnDescription
|
|
DisplayString,
|
|
trunkIsdnB1Status
|
|
DisplayString,
|
|
trunkIsdnB2Status
|
|
DisplayString
|
|
}
|
|
|
|
trunkIsdnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the index of the row.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.1"
|
|
::= { trunkIsdnEntry 1 }
|
|
|
|
trunkIsdnName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk name.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.2"
|
|
::= { trunkIsdnEntry 2 }
|
|
|
|
trunkIsdnType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk type.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.3"
|
|
::= { trunkIsdnEntry 3 }
|
|
|
|
trunkIsdnEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk enable configuration.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.4"
|
|
::= { trunkIsdnEntry 4 }
|
|
|
|
trunkIsdnDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk description.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.5"
|
|
::= { trunkIsdnEntry 5 }
|
|
|
|
trunkIsdnB1Status OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk B1 status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.6"
|
|
::= { trunkIsdnEntry 6 }
|
|
|
|
trunkIsdnB2Status OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk B2 status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.2.1.7"
|
|
::= { trunkIsdnEntry 7 }
|
|
|
|
trunkFxoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TrunkFxoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of configured voip FXO trunk.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.3"
|
|
::= { trunk 3 }
|
|
|
|
trunkFxoEntry OBJECT-TYPE
|
|
SYNTAX TrunkFxoEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"OID: 1.3.6.1.4.1.7745.5.4.1.3.1"
|
|
INDEX { trunkFxoIndex }
|
|
::= { trunkFxoTable 1 }
|
|
|
|
TrunkFxoEntry ::=
|
|
SEQUENCE {
|
|
trunkFxoIndex
|
|
INTEGER,
|
|
trunkFxoName
|
|
DisplayString,
|
|
trunkFxoType
|
|
DisplayString,
|
|
trunkFxoEnable
|
|
INTEGER,
|
|
trunkFxoDescription
|
|
DisplayString,
|
|
trunkFxoStatus
|
|
DisplayString
|
|
}
|
|
|
|
trunkFxoIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the index of the row.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.1"
|
|
::= { trunkFxoEntry 1 }
|
|
|
|
trunkFxoName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk name.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.2"
|
|
::= { trunkFxoEntry 2 }
|
|
|
|
trunkFxoType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk type.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.3"
|
|
::= { trunkFxoEntry 3 }
|
|
|
|
trunkFxoEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk enable configuration.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.4"
|
|
::= { trunkFxoEntry 4 }
|
|
|
|
trunkFxoDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk description.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.5"
|
|
::= { trunkFxoEntry 5 }
|
|
|
|
trunkFxoStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read trunk status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.1.3.1.6"
|
|
::= { trunkFxoEntry 6 }
|
|
|
|
userTerminal OBJECT IDENTIFIER ::= { voip 2 } -- Voip User Terminal
|
|
|
|
usTermPotsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UsTermPotsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of configured voip POTS user terminal.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.1"
|
|
::= { userTerminal 1 }
|
|
|
|
usTermPotsEntry OBJECT-TYPE
|
|
SYNTAX UsTermPotsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"OID: 1.3.6.1.4.1.7745.5.4.2.1.1"
|
|
INDEX { usTermPotsIndex }
|
|
::= { usTermPotsTable 1 }
|
|
|
|
UsTermPotsEntry ::=
|
|
SEQUENCE {
|
|
usTermPotsIndex
|
|
INTEGER,
|
|
usTermPotsEnable
|
|
INTEGER,
|
|
usTermPotsDescription
|
|
DisplayString,
|
|
usTermPotsStatus
|
|
DisplayString,
|
|
usTermPotsDspSlic
|
|
DisplayString
|
|
}
|
|
|
|
usTermPotsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the index of the row.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.1"
|
|
::= { usTermPotsEntry 1 }
|
|
|
|
usTermPotsEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal enable configuration.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.2"
|
|
::= { usTermPotsEntry 2 }
|
|
|
|
usTermPotsDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal description.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.3"
|
|
::= { usTermPotsEntry 3 }
|
|
|
|
usTermPotsStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.4"
|
|
::= { usTermPotsEntry 4 }
|
|
|
|
usTermPotsDspSlic OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal DSP Slic.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.1.1.5"
|
|
::= { usTermPotsEntry 5 }
|
|
|
|
usTermISDNTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UsTermISDNEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of configured voip ISDN user terminal.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.2"
|
|
::= { userTerminal 2 }
|
|
|
|
usTermISDNEntry OBJECT-TYPE
|
|
SYNTAX UsTermISDNEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"OID: 1.3.6.1.4.1.7745.5.4.2.2.1"
|
|
INDEX { usTermISDNIndex }
|
|
::= { usTermISDNTable 1 }
|
|
|
|
UsTermISDNEntry ::=
|
|
SEQUENCE {
|
|
usTermISDNIndex
|
|
INTEGER,
|
|
usTermISDNEnable
|
|
INTEGER,
|
|
usTermISDNDescription
|
|
DisplayString,
|
|
usTermIsdnStatusB1
|
|
DisplayString,
|
|
usTermIsdnStatusB2
|
|
DisplayString
|
|
}
|
|
|
|
usTermISDNIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the index of the row.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.1"
|
|
::= { usTermISDNEntry 1 }
|
|
|
|
usTermISDNEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal enable configuration.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.2"
|
|
::= { usTermISDNEntry 2 }
|
|
|
|
usTermISDNDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal description.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.3"
|
|
::= { usTermISDNEntry 3 }
|
|
|
|
usTermIsdnStatusB1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal B1 status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.4"
|
|
::= { usTermISDNEntry 4 }
|
|
|
|
usTermIsdnStatusB2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal B2 status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.2.1.5"
|
|
::= { usTermISDNEntry 5 }
|
|
|
|
usTermDectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UsTermDectEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of configured voip DECT user terminal.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.3"
|
|
::= { userTerminal 3 }
|
|
|
|
usTermDectEntry OBJECT-TYPE
|
|
SYNTAX UsTermDectEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"OID: 1.3.6.1.4.1.7745.5.4.2.3.1"
|
|
INDEX { usTermDectIndex }
|
|
::= { usTermDectTable 1 }
|
|
|
|
UsTermDectEntry ::=
|
|
SEQUENCE {
|
|
usTermDectIndex
|
|
INTEGER,
|
|
usTermDectEnable
|
|
INTEGER,
|
|
usTermDectDescription
|
|
DisplayString,
|
|
usTermDectStatus
|
|
DisplayString,
|
|
usTermDectDspSlic
|
|
DisplayString
|
|
}
|
|
|
|
usTermDectIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read the index of the row.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.1"
|
|
::= { usTermDectEntry 1 }
|
|
|
|
usTermDectEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal enable configuration.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.2"
|
|
::= { usTermDectEntry 2 }
|
|
|
|
usTermDectDescription OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal description.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.3"
|
|
::= { usTermDectEntry 3 }
|
|
|
|
usTermDectStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal status.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.4"
|
|
::= { usTermDectEntry 4 }
|
|
|
|
usTermDectDspSlic OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Get this parameter to read user terminal DSP Slic.
|
|
OID: 1.3.6.1.4.1.7745.5.4.2.3.1.5"
|
|
::= { usTermDectEntry 5 }
|
|
|
|
voipMaxConnection OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Set this parameter to configure global voip max connections.
|
|
OID: 1.3.6.1.4.1.7745.5.4.3"
|
|
::= { voip 3 }
|
|
|
|
--
|
|
-- Traps v2c definitions
|
|
--
|
|
|
|
genericTrap NOTIFICATION-TYPE
|
|
OBJECTS { genericError }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is used to send generic string alarm messages to SNMP manager,
|
|
when a particular condition occurs.
|
|
OID: 1.3.6.1.4.1.7745.5.5.1"
|
|
::= { traps 1 }
|
|
|
|
genericError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Describe a generic error for generic trap.
|
|
OID: 1.3.6.1.4.1.7745.5.5.2"
|
|
::= { traps 2 }
|
|
|
|
interfaceUp NOTIFICATION-TYPE
|
|
OBJECTS { ifDescr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent when a physical interface go up.
|
|
OID: 1.3.6.1.4.1.7745.5.5.3"
|
|
::= { traps 3 }
|
|
|
|
interfaceDown NOTIFICATION-TYPE
|
|
OBJECTS { ifDescr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent when a physical interface go down.
|
|
OID: 1.3.6.1.4.1.7745.5.5.4"
|
|
::= { traps 4 }
|
|
|
|
trunkRegistered NOTIFICATION-TYPE
|
|
OBJECTS { trunkName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent when a voip SIP Trunk registered.
|
|
OID: 1.3.6.1.4.1.7745.5.5.5"
|
|
::= { traps 5 }
|
|
|
|
trunkUnregistered NOTIFICATION-TYPE
|
|
OBJECTS { trunkName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent when a voip SIP Trunk unregistered.
|
|
OID: 1.3.6.1.4.1.7745.5.5.6"
|
|
::= { traps 6 }
|
|
|
|
mgmtAccesses OBJECT IDENTIFIER ::= { traps 7 } -- Management Access Traps
|
|
|
|
mgmtUser OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual string containing user name.
|
|
OID: 1.3.6.1.4.1.7745.5.5.7.1"
|
|
::= { mgmtAccesses 1 }
|
|
|
|
mgmtPrivilege OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual string containing user privilege.
|
|
OID: 1.3.6.1.4.1.7745.5.5.7.2"
|
|
::= { mgmtAccesses 2 }
|
|
|
|
mgmtTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual string containing time and date of event.
|
|
OID: 1.3.6.1.4.1.7745.5.5.7.3"
|
|
::= { mgmtAccesses 3 }
|
|
|
|
mgmtType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
console(1),
|
|
telnet(2),
|
|
web(3),
|
|
snmp(4),
|
|
ssh(5),
|
|
tr069(6),
|
|
unknown(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual string containing user access type.
|
|
OID: 1.3.6.1.4.1.7745.5.5.7.4"
|
|
::= { mgmtAccesses 4 }
|
|
|
|
mgmtAddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual string containing ip for remote access type.
|
|
OID: 1.3.6.1.4.1.7745.5.5.7.5"
|
|
::= { mgmtAccesses 5 }
|
|
|
|
mgmtLogin NOTIFICATION-TYPE
|
|
OBJECTS { mgmtUser, mgmtPrivilege, mgmtTime, mgmtType, mgmtAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent when a user login in the system console.
|
|
OID: 1.3.6.1.4.1.7745.5.5.7.6"
|
|
::= { mgmtAccesses 6 }
|
|
|
|
mgmtLogout NOTIFICATION-TYPE
|
|
OBJECTS { mgmtUser, mgmtPrivilege, mgmtTime, mgmtType, mgmtAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent when a user logout from the system console.
|
|
OID: 1.3.6.1.4.1.7745.5.5.7.7"
|
|
::= { mgmtAccesses 7 }
|
|
|
|
mgmtChange NOTIFICATION-TYPE
|
|
OBJECTS { mgmtUser, mgmtTime, mgmtType, mgmtAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is sent when a logged user change param in the system console.
|
|
OID: 1.3.6.1.4.1.7745.5.5.7.8"
|
|
::= { mgmtAccesses 8 }
|
|
|
|
|
|
ifcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is a table showing the list of interface entries.
|
|
The number of entries is given by the value of mib-2 ifNumber.
|
|
The indexes for the rows are equivalent to mib-2 ifIndex.
|
|
OID: 1.3.6.1.4.1.7745.5.6.1"
|
|
::= { ifc 1 }
|
|
|
|
ifcEntry OBJECT-TYPE
|
|
SYNTAX IfcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1"
|
|
INDEX { ifIndex }
|
|
::= { ifcTable 1 }
|
|
|
|
IfcEntry ::=
|
|
SEQUENCE {
|
|
ifcName
|
|
DisplayString,
|
|
ifcDescr
|
|
DisplayString,
|
|
ifcType
|
|
IANAifType,
|
|
ifcPhysAddress
|
|
PhysAddress,
|
|
ifcMtu
|
|
INTEGER,
|
|
ifcSpeed
|
|
Gauge,
|
|
ifcRxRate
|
|
Counter,
|
|
ifcTxRate
|
|
Counter
|
|
}
|
|
|
|
ifcName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get this parameter to read interface name.
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1.1"
|
|
::= { ifcEntry 1 }
|
|
|
|
ifcDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get this parameter to read interface description.
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1.2"
|
|
::= { ifcEntry 2 }
|
|
|
|
ifcType OBJECT-TYPE
|
|
SYNTAX IANAifType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get this parameter to read interface type.
|
|
The types refer to those assigned by the Internet Assigned Numbers Authority (IANA).
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1.3"
|
|
::= { ifcEntry 3 }
|
|
|
|
ifcPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get this parameter to read interface physical address (mac address).
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1.4"
|
|
::= { ifcEntry 4 }
|
|
|
|
ifcMtu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get this parameter to read interface MTU,
|
|
the size of the largest datagram which can be sent/received on the interface,
|
|
specified in octets.
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1.5"
|
|
::= { ifcEntry 5 }
|
|
|
|
ifcSpeed OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get this parameter to read interface speed,
|
|
an estimate of the interface's current bandwidth in bits per second.
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1.6"
|
|
::= { ifcEntry 6 }
|
|
|
|
ifcRxRate OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get this parameter to read the current and effective RX rate in bit per second.
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1.7"
|
|
::= { ifcEntry 7 }
|
|
|
|
ifcTxRate OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Get this parameter to read the current and effective TX rate in bit per second.
|
|
OID: 1.3.6.1.4.1.7745.5.6.1.1.8"
|
|
::= { ifcEntry 8 }
|
|
|
|
END
|