1688 lines
74 KiB
Plaintext
1688 lines
74 KiB
Plaintext
ADTRAN-TAeSCUEXT1-MIB
|
|
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
-- TITLE: The ADTRAN enhanced System Controller Unit MIB Extension 1.
|
|
-- PRODUCT: 1181018L1
|
|
-- VERSION: 1.1
|
|
-- DATE: 11/20/2002
|
|
|
|
-- This MIB is an extension to the ADTRAN-TAeSCU-MIB MIB.
|
|
|
|
|
|
-- HISTORY:
|
|
-- 11/20/2002 ap First edition.
|
|
-- 03/06/2003 ap Add adTAeSCUAlarmMg, adTAeSCUAlarmEnable and
|
|
-- adGenSlot extention table (adGenSlotSCUext)
|
|
-- 06/17/2003 ap Add PCU adTAeSCUAlarmEnable description.
|
|
-- 07/10/2003 bkp Added SCM adTAeSCUAlarmEnable description.
|
|
-- 11/12/2003 ap Add adGenSlotInfoStateSaveNVRAM.
|
|
-- 04/22/2004 wfe Added support for Card Comm Fail Traps.
|
|
-- 08/01/2004 wfe Changed name of Card Comm Fail Traps to be unique
|
|
-- within first 20 chars. Also, changed severities
|
|
-- to be MAJOR.
|
|
-- 08/01/2004 dlw Removed the range for adTAeSCUAIDIndex - it became irrelevant.
|
|
-- Changed 'adTAeSCUmg 16' to 'adTAeSCUmg 23'.
|
|
-- 08/24/2004 dlw Undo change - adTAeSCUmg back to '16' (that is the correct value).
|
|
-- 02/01/2005 ap Add adTAeFileTransferMgmt and sub items.
|
|
-- 10/20/2005 ap Add adTAeSCUAlarmEnable to adTAeSCUAlarmEnable comment
|
|
-- 10/25/2005 ap Add adAeSCU
|
|
-- 02/02/2006 KMM Changes while adding support for packed sstate msgs. Changes to
|
|
-- adTAeSCUAlarmEnable:
|
|
-- *) Clean-up.
|
|
-- *) Initial support for TA-5000.
|
|
-- *) Added support for many OPTI-6100 alarms which were missing.
|
|
-- *) Added support for new sstate fail alarms.
|
|
-- *) For the OPTI:
|
|
-- *) Renamed:
|
|
-- 57 DCC Link Down (adOptiMxSCMDCCAlm)
|
|
-- to
|
|
-- 57 adOptiMxSCMDCCAlm
|
|
-- *) Renumbered:
|
|
-- 49 adTAeSCUCraftLoginNotfication
|
|
-- to
|
|
-- 50 adTAeSCUCraftLoginNotfication
|
|
-- 04/03/2006 KMM Added support for provisioning mismatch alarm in adTAeSCUAlarmEnable:
|
|
-- *) Added adTACleiCodeMisMatch to all projects.
|
|
-- *) While here, added:
|
|
-- *) adTACriticalAudibleRelayActive
|
|
-- *) adTACriticalVisualRelayActive
|
|
-- *) adTAMajAudibleRelayActive
|
|
-- *) adTAMajVisualRelayActive
|
|
-- *) adTAMinorAudibleRelayActive
|
|
-- *) adTAMinorVisualRelayActive
|
|
-- *) adTAAux1RelayActive
|
|
-- *) adTAAux2RelayActive
|
|
-- to all projects except for the TA-1100F. Present in
|
|
-- g_XlateAlarmIndex but missing in adTAeSCUAlarmEnable.
|
|
-- 04/06/2006 DLW Added adTASoftwareVerMisMatchLevel provisioning for the
|
|
-- software version mismatch alarm.
|
|
-- 05/09/2006 JMC Added power shedding bit definitions to commments.
|
|
-- 06/12/2006 KMM Adding support for HFANM.
|
|
-- *) In adTAeSCUenvAlarmsTable DESCRIPTION, removed info on each
|
|
-- individual alarm since it was not correct, and is different for
|
|
-- each project.
|
|
-- *) Added to the OPTI section of adTAeSCUAlarmEnable:
|
|
-- *) adTAFanMPowerAFail
|
|
-- *) adTAFanMPowerBFail
|
|
-- 06/20/2006 dlw Updated the DESCRIPTION fields:
|
|
-- - Clean up: adTAeSCUenvAlarmDefaultName
|
|
-- - Add description for read-only indexes Pri/Sec Clock ENV alarms:
|
|
-- adTAeSCUenvAlarmUserName, adTAeSCUenvAlarmInputLevel,
|
|
-- adTAeSCUAIDIndex, adTAeSCUConditionCode.
|
|
-- 10/06/2006 BKP Added SRM alarms to the adTAeSCUAlarmEnable bitmask description.
|
|
-- 01/08/2007 AP Added IP Access Control tree (adTaIPServicePortProvMgmt)
|
|
-- 04/12/2007 KMM Added support for adTAEquipmentFaultActive(83) in adTAeSCUAlarmEnable
|
|
-- OPTI section.
|
|
-- 05/02/2007 KMM Due to power shedding having it's own feature enable/disable, deprecated
|
|
-- support for
|
|
-- *) adTAPowerSheddingInputAsserted
|
|
-- *) adTAPowerSheddingActivated
|
|
-- in adTAeSCUAlarmEnable in the TA-3000, PCU, and TA-5000 projects.
|
|
-- 05/02/2007 KGG Added SFTP as enumeration 4 on FileTransferMethod. It wasn't listed.
|
|
-- Updated the comments for that oid as well too.
|
|
-- Added LFFS as Remote File Method for OPTI 2.
|
|
-- 06/14/2007 WFE Added the alarm bits to adTAeSCUAlarmEnable for the OSP platform.
|
|
-- 06/28/2007 AP Add adTaCLITelnetPortNumber, adTaCLIIPAccess, and adTaCLISSHPortNumber
|
|
-- 01/31/2008 BKP Added the adTAeSCUAdminPort section to replace the out dated adGenESCUadminPortMode OID.
|
|
-- 03/27/2008 WFE Added adTAeSCUAlarmEnable bits for the TA5000 HDX alarms (adTASCM5kChassisLinkStatusDown
|
|
-- and adTASCM5kChassisRemoved).
|
|
-- 04/17/2008 DLW Added adTASysCtrlInvalidController, adTASysCtrlInvalidControllerClear traps.
|
|
-- Added adTAeSCUSystemInactiveAccountExpiration, adTASysCtrlSwdnldStarted,
|
|
-- and adTASysCtrlInvalidController bits for OPTI 6100 alarms.
|
|
-- 05/09/2008 DLW Updated the adTAeSCUAlarmEnable DESCRIPTION field for TA5000 with the correct
|
|
-- position for 'adTAeSCUSystemInactiveAccountExpiration' and corrected the ones
|
|
-- that follow.
|
|
-- 08/25/2008 DLW Added adGenSlotProdName to IMPORTS, and added adTASysModuleRestart trap.
|
|
-- 02/13/2009 KMM In adTAeSCUAlarmEnable, OPTI-6100 SCM, deprecated bit 83,
|
|
-- adTAEquipmentFaultActive.
|
|
-- 03/02/2009 KABC Added adTaHTTPIPAccess and adTaHTTPSIPAccess
|
|
-- 03/06/2009 DLW Remove "Index 33 OPTI-6100 'Primary Clock Loss'" and
|
|
-- "Index 34 OPTI-6100 'Secondary Clock Loss'" from
|
|
-- descriptions under adTAeSCUenvAlarmsTableEntry.
|
|
-- Index 36, Env Over Temperature Alarm, has not been fully implemented and
|
|
-- will not be use until further notice.
|
|
-- These three alarms will not appear in get results.
|
|
-- 05/05/09 AP Convert to SNMPv2
|
|
-- 07/06/2010 JLB Added adGenSlotProdName to traps adTAeSCUCtrpCardInserted and adTAeSCUCtrpCardRemoved
|
|
-- 09/26/2013 RJF "DO NOT MAKE HISTORY COMMENTS HERE!!!! Revision history now in REVISION/DESCRIPTION clauses below"
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
MODULE-IDENTITY,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
sysName
|
|
FROM SNMPv2-MIB
|
|
AdPresence
|
|
FROM ADTRAN-TC
|
|
adGenSlotInfoIndex, adGenSlotProdName
|
|
FROM ADTRAN-GENSLOT-MIB
|
|
adTAeSCUmg,
|
|
adTAeSCUSecAccountUserID,
|
|
adTAeSCUNetworkMgmt,
|
|
adTAeSCUmgNotificationEvents
|
|
FROM ADTRAN-TAeSCU-MIB
|
|
adTrapInformSeqNum
|
|
FROM ADTRAN-GENTRAPINFORM-MIB
|
|
|
|
;
|
|
|
|
adtranTAeSCUExt1MIB MODULE-IDENTITY
|
|
LAST-UPDATED "201309191018Z"
|
|
ORGANIZATION "Adtran, Inc."
|
|
CONTACT-INFO
|
|
"CND Tech Support
|
|
Postal: ADTRAN, Inc.
|
|
901 Explorer Blvd.
|
|
Huntsville, AL 35806
|
|
Tel: +1 800 726-8663
|
|
Fax: +1 256 963 6217
|
|
E-mail: support@adtran.com"
|
|
DESCRIPTION
|
|
"This MIB defines the objects for the adtranTAeScuMib MIB."
|
|
|
|
REVISION "201309191018Z"
|
|
DESCRIPTION
|
|
"Add initial support for AutoUpgrade EOSS (End Of Software Support) Alarms.
|
|
Update several missing adTAeSCUAlarmEnable alarm bit descriptions."
|
|
|
|
REVISION "201208141300Z"
|
|
DESCRIPTION "Added cLI(5) to adTAeSCUAdminPortMode."
|
|
REVISION "200705010000Z"
|
|
DESCRIPTION "Converted from SNMPv1 adTAeSCU.mib file."
|
|
|
|
::= { adTAeSCUmg 241 }
|
|
|
|
adTAeSCUMuxModuleProv OBJECT IDENTIFIER
|
|
::= { adTAeSCUmg 16 }
|
|
|
|
--
|
|
-- See adGenESCUmoduleAutoProv and adGenESCUmuxAutoProv
|
|
--
|
|
|
|
adTAeSCUWriteModuleProvisioning OBJECT IDENTIFIER
|
|
::= { adTAeSCUMuxModuleProv 7 }
|
|
|
|
adTAeSCUProvisioningSource OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the source slot number. This is the slot
|
|
that will be copied to the destination slots. A
|
|
value of zero means no slot is set.
|
|
adGenESCUmoduleAutoProv and adGenESCUmuxAutoProv must
|
|
be enabled."
|
|
::= { adTAeSCUWriteModuleProvisioning 1 }
|
|
|
|
|
|
|
|
adTAeSCUProvDestinationSlots OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination slots to copy to. A valid destination slot
|
|
must be compatible with the source slot. Copy provisioning
|
|
will be ignored if the slots are not compatible. The
|
|
following format must be used.
|
|
**************************************************************
|
|
1) A slot number from 1 to 255. Slot number greater than 0 and
|
|
less than 255.
|
|
2) A range or slot numbers (1..255)-(1..255) Example: 1-5.
|
|
3) A series of slot numbers separated by ',' (a comma).
|
|
4) A series of slot numbers separated by ',' and or range of
|
|
slot numbers separated by a ','.
|
|
5) Each slot number or range of slot numbers must be separated by
|
|
a ',' (comma).
|
|
Example 1: '1' Copy provisioning to slots 1.
|
|
Example 2: '1,5' Copy provisioning to slots 1 and 5.
|
|
Example 3: '4-9' Copy provisioning to slots 4 through 9.
|
|
Example 4: '3,5-8,9' Copy provisioning to slots 3,9, and 5 to 8.
|
|
Error Example: '8-4' This is an invalid range.
|
|
Error: Copy from an invalid or empty slot.
|
|
Error: Copy to an Empty slot. A slot must be occupied with a
|
|
compatible line card.
|
|
Error: Card is incompatible."
|
|
|
|
::= { adTAeSCUWriteModuleProvisioning 3 }
|
|
|
|
|
|
adTAeSCUWriteProvInitiate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initiate(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Command to initiate write copy provisioning."
|
|
::= { adTAeSCUWriteModuleProvisioning 4 }
|
|
|
|
|
|
|
|
adTAeSCUWriteProvStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdTAeSCUWriteProvStatusTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Copy provision status table"
|
|
::= { adTAeSCUWriteModuleProvisioning 5 }
|
|
|
|
|
|
adTAeSCUWriteProvStatusTableEntry OBJECT-TYPE
|
|
SYNTAX AdTAeSCUWriteProvStatusTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Copy provision status table table."
|
|
INDEX { adGenSlotInfoIndex }
|
|
::= { adTAeSCUWriteProvStatusTable 1 }
|
|
|
|
AdTAeSCUWriteProvStatusTableEntry ::=
|
|
SEQUENCE {
|
|
adTAeSCUWriteProvInitiateStatus
|
|
DisplayString
|
|
}
|
|
|
|
adTAeSCUWriteProvInitiateStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of adTAeSCUWriteProvInitiate command.
|
|
Busy(slot #,command_time),Details...
|
|
Idle
|
|
Complete; SUCCESS..... (Details)
|
|
Complete; ERROR: ...... (Details)
|
|
"
|
|
::= { adTAeSCUWriteProvStatusTableEntry 1 }
|
|
|
|
|
|
-- *******************************************************************************************************
|
|
|
|
-- ********************************************************************************************************
|
|
|
|
--
|
|
|
|
|
|
adTAeSCUUserDefinableAlarm OBJECT IDENTIFIER
|
|
::= { adTAeSCUmg 18 }
|
|
|
|
adTAeSCUAccModuleRemovedLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
minor(4),
|
|
major(5),
|
|
critical(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access Module Removed Alarm Level."
|
|
::= { adTAeSCUUserDefinableAlarm 3 }
|
|
|
|
adTAeSCUCraftLoginAlarmLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
info(2),
|
|
alert(3),
|
|
minor(4),
|
|
major(5),
|
|
critical(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm Level for the adTAeSCUCraftLoginNotfication."
|
|
::= { adTAeSCUUserDefinableAlarm 4 }
|
|
|
|
adTAeSCUMUXRemovedLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
minor(4),
|
|
major(5),
|
|
critical(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MUX Removed Alarm Level."
|
|
::= { adTAeSCUUserDefinableAlarm 5 }
|
|
|
|
adTAeSCUTrapAlarmLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
info(2),
|
|
alert(3),
|
|
minor(4),
|
|
major(5),
|
|
critical(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm Level of a trap. This value is invalid if read.
|
|
This will be used as a varbind in a trap to indicate
|
|
its alarm level."
|
|
::= { adTAeSCUUserDefinableAlarm 6 }
|
|
|
|
adTAeSCUenvAlarmsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdTAeSCUenvAlarmsTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enhanced System Controller Unit Environmental alarm table"
|
|
::= { adTAeSCUUserDefinableAlarm 7 }
|
|
|
|
|
|
adTAeSCUenvAlarmsTableEntry OBJECT-TYPE
|
|
SYNTAX AdTAeSCUenvAlarmsTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Controller Unit Environmental alarm table."
|
|
INDEX { adTAeSCUAalarmIndex }
|
|
::= { adTAeSCUenvAlarmsTable 1 }
|
|
|
|
AdTAeSCUenvAlarmsTableEntry ::=
|
|
SEQUENCE {
|
|
adTAeSCUAalarmIndex
|
|
Integer32,
|
|
adTAeSCUenvAlarmDefaultName
|
|
DisplayString,
|
|
adTAeSCUenvAlarmUserName
|
|
DisplayString,
|
|
adTAeSCUenvAlarmInputLevel
|
|
INTEGER,
|
|
adTAeSCUAIDIndex
|
|
Integer32,
|
|
adTAeSCUConditionCode
|
|
DisplayString
|
|
}
|
|
adTAeSCUAalarmIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm Index."
|
|
::= { adTAeSCUenvAlarmsTableEntry 1 }
|
|
adTAeSCUenvAlarmDefaultName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default alarm name."
|
|
::= { adTAeSCUenvAlarmsTableEntry 2 }
|
|
adTAeSCUenvAlarmUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A user specified name.
|
|
adTAeSCUenvAlarmDefaultName or a user provided name.
|
|
Index 4 '-48V Bus A Input' read-only.
|
|
Index 5 '-48V Bus B Input' is read-only.
|
|
Index 4 and 5 will return an error."
|
|
::= { adTAeSCUenvAlarmsTableEntry 3 }
|
|
|
|
adTAeSCUenvAlarmInputLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
info(2),
|
|
alert(3),
|
|
minor(4),
|
|
major(5),
|
|
critical(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm level."
|
|
::= { adTAeSCUenvAlarmsTableEntry 4 }
|
|
adTAeSCUAIDIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AID Index."
|
|
::= { adTAeSCUenvAlarmsTableEntry 5 }
|
|
adTAeSCUConditionCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..11))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Condition code."
|
|
::= { adTAeSCUenvAlarmsTableEntry 6 }
|
|
|
|
|
|
|
|
---
|
|
---
|
|
---
|
|
-- *******************************************************************************************************
|
|
|
|
-- ********************************************************************************************************
|
|
|
|
-- Enable or disalble any trap in the eSCU
|
|
|
|
|
|
adTAeSCUAlarmMg OBJECT IDENTIFIER
|
|
::= { adTAeSCUmg 20 }
|
|
|
|
|
|
adTAeSCUAlarmEnable OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit encoded string representing the enabled/disabled
|
|
status of all alarms for the eSCU. The bits are defined
|
|
in network order, that is, most significant bit first.
|
|
For all entries:
|
|
0 = DISABLE
|
|
1 = ENABLE
|
|
The various bit positions are:
|
|
|
|
*****************************************************
|
|
TA-3000 SCU: (adTAeSCUAlarmEnable)
|
|
*****************************************************
|
|
1 adTAeSCUSystemLogFull
|
|
2 adTAeSCUSystemLogInvalidAuthentAtt
|
|
3 adTAeSCUSystemLogFailure
|
|
4 adTAeSCUCtrpBusApowerAlm and adTAeSCUCtrpBusApwrAlmClear
|
|
5 adTAeSCUCtrpBusBpowerAlm and adTAeSCUCtrpBusBpwrAlmClear
|
|
6 adTAeSCUCtrpCardInserted and adTAeSCUCtrpCardRemoved
|
|
7 adTAeSCUCtrpExt1Alm and adTAeSCUCtrpExt1AlmClear
|
|
8 adTAeSCUCtrpExt2Alm and adTAeSCUCtrpExt2AlmClear
|
|
9 adTAeSCUCtrpRmtAlm and adTAeSCUCtrpRmtAlmClear
|
|
10 adTAeSCUCtrpBlownFuse
|
|
11 DIDauthenticationFailure
|
|
12 DIDlinkDown
|
|
13 DIDlinkUp
|
|
14 No SNMP support - Device comm failure Active and Device comm failure Clear
|
|
15 Service State alarms
|
|
16 adTAeSCUAutoUpgradeConfigChanged
|
|
17 adTAeSCUAutoUpgradeInvalidConfigFile
|
|
18 adTAeSCUAutoUpgradeModuleUpgradeStarted
|
|
19 adTAeSCUAutoUpgradeModuleUpgradeCompleted
|
|
20 adTAeSCUAutoUpgradeModuleUpgradeFailed
|
|
21 adTAeSCUAutoUpgradeUnknownModule
|
|
22 adTAPowerSheddingInputAsserted (deprecated)
|
|
23 adTAPowerSheddingActivated (deprecated)
|
|
24 adTAeSCUCardCommFail and adTAeSCUCardCommRestored
|
|
25 adTAeSCUCraftLoginNotfication
|
|
26 adTASetSingleServiceStateMsgFail
|
|
27 adTAGetSingleServiceStateMsgFail
|
|
28 adTASetAllServiceStateMsgFail
|
|
29 adTAGetAllServiceStateMsgFail
|
|
30 adTACriticalAudibleRelayActive
|
|
31 adTACriticalVisualRelayActive
|
|
32 adTAMajAudibleRelayActive
|
|
33 adTAMajVisualRelayActive
|
|
34 adTAMinorAudibleRelayActive
|
|
35 adTAMinorVisualRelayActive
|
|
36 adTAAux1RelayActive
|
|
37 adTAAux2RelayActive
|
|
38 adTACleiCodeMisMatch
|
|
39 adTAAUSoftwareVerErr
|
|
|
|
*****************************************************
|
|
OPTI-6100 SCM: (adTAeSCUAlarmEnable)
|
|
*****************************************************
|
|
1 adTAeSCUSystemLogFull
|
|
2 adTAeSCUSystemLogInvalidAuthentAtt
|
|
3 adTAeSCUSystemLogFailure
|
|
4 adTAeSCUCtrpBusApowerAlm and adTAeSCUCtrpBusApwrAlmClear
|
|
5 adTAeSCUCtrpBusBpowerAlm and adTAeSCUCtrpBusBpwrAlmClear
|
|
6 adTAeSCUCtrpCardInserted and adTAeSCUCtrpCardRemoved
|
|
7 adTAeSCUCtrpExt1Alm and adTAeSCUCtrpExt1AlmClear
|
|
8 adTAeSCUCtrpExt2Alm and adTAeSCUCtrpExt2AlmClear
|
|
9 adOptiSCMCtrpExt3Alm and adOptiMxSCMCtrpExt3AlmClear
|
|
10 adTAeSCUCtrpBlownFuse
|
|
11 DIDauthenticationFailure
|
|
12 DIDlinkDown
|
|
13 DIDlinkUp
|
|
14 No SNMP support - Device comm failure Active and Device comm failure Clear
|
|
15 Service State alarms
|
|
16 adTAeSCUAutoUpgradeConfigChanged
|
|
17 adTAeSCUAutoUpgradeInvalidConfigFile
|
|
18 adTAeSCUAutoUpgradeModuleUpgradeStarted
|
|
19 adTAeSCUAutoUpgradeModuleUpgradeCompleted
|
|
20 adTAeSCUAutoUpgradeModuleUpgradeFailed
|
|
21 adTAeSCUAutoUpgradeUnknownModule
|
|
22 adOptiSCMSingleFanFailureAlm and adOptiSCMSingleFanFailureAlmClear
|
|
23 adOptiMxSCMMultiFanFailureAlm and adOptiMxSCMMultiFanFailureAlmClear
|
|
24 adTAeSCUCardCommFail and adTAeSCUCardCommRestored
|
|
25 Enhanced Fan Auxiliary Input 1 Alarm
|
|
26 Enhanced Fan Auxiliary Input 2 Alarm
|
|
27 Enhanced Fan Auxiliary Input 3 Alarm
|
|
28 Enhanced Fan Auxiliary Input 4 Alarm
|
|
29 Enhanced Fan Auxiliary Input 5 Alarm
|
|
30 Enhanced Fan Auxiliary Input 6 Alarm
|
|
31 Enhanced Fan Auxiliary Input 7 Alarm
|
|
32 Enhanced Fan Auxiliary Input 8 Alarm
|
|
33 Enhanced Fan Auxiliary Input 9 Alarm
|
|
34 Enhanced Fan Auxiliary Input 10 Alarm
|
|
35 Enhanced Fan Auxiliary Input 11 Alarm
|
|
36 Enhanced Fan Auxiliary Input 12 Alarm
|
|
37 Enhanced Fan Auxiliary Input 13 Alarm
|
|
38 Enhanced Fan Auxiliary Input 14 Alarm
|
|
39 Enhanced Fan Auxiliary Input 15 Alarm
|
|
40 Enhanced Fan Auxiliary Input 16 Alarm
|
|
41 Auxiliary 1 Low Battery Alarm
|
|
42 Auxiliary 1 No Battery Alarm
|
|
43 Auxiliary 1 AC Failure Alarm
|
|
44 Auxiliary 2 Low Battery Alarm
|
|
45 Auxiliary 2 No Battery Alarm
|
|
46 Auxiliary 2 AC Failure Alarm
|
|
47 Auxiliary 3 Low Battery Alarm
|
|
48 Auxiliary 3 No Battery Alarm
|
|
49 Auxiliary 3 AC Failure Alarm
|
|
50 adTAeSCUCraftLoginNotfication
|
|
51 Fan Filter Alarm
|
|
52 Env Over Temperature Alarm
|
|
53 Primary Clock Failure Alarm (deprecated)
|
|
54 Secondary Clock Failure Alarm (deprecated)
|
|
55 Software Download Complete Alarm
|
|
56 Software Download Failure Alarm
|
|
57 adOptiMxSCMDCCAlm
|
|
58 adTASetSingleServiceStateMsgFail
|
|
59 adTAGetSingleServiceStateMsgFail
|
|
60 adTASetAllServiceStateMsgFail
|
|
61 adTAGetAllServiceStateMsgFail
|
|
62 adTACriticalAudibleRelayActive
|
|
63 adTACriticalVisualRelayActive
|
|
64 adTAMajAudibleRelayActive
|
|
65 adTAMajVisualRelayActive
|
|
66 adTAMinorAudibleRelayActive
|
|
67 adTAMinorVisualRelayActive
|
|
68 adTAAux1RelayActive
|
|
69 adTAAux2RelayActive
|
|
70 adTACleiCodeMisMatch
|
|
71 adTAAUSoftwareVerErr
|
|
72 adTAFanMPowerAFail
|
|
73 adTAFanMPowerBFail
|
|
74 adTASrmPrimaryRlsIncompleteActive
|
|
75 adTASrmSecondaryRlsIncompleteActive
|
|
76 adTASrmNewPrimaryRelease
|
|
77 adTASrmReleaseUpgradeStarted
|
|
78 adTASrmReleaseUpgradeCompleted
|
|
79 adTASrmReleaseUpgradeFailed
|
|
80 adTASrmPrimaryBackupStarted
|
|
81 adTASrmPrimaryBackupCompleted
|
|
82 adTASrmPrimaryBackupFailed
|
|
83 adTAEquipmentFaultActive (deprecated)
|
|
84 adTAeSCUSystemInactiveAccountExpiration
|
|
85 adTASysCtrlSwdnldStarted
|
|
86 adTASysCtrlInvalidController
|
|
|
|
*****************************************************
|
|
TA-3000 PCU: (adTAeSCUAlarmEnable)
|
|
*****************************************************
|
|
1 adTAeSCUSystemLogFull
|
|
2 adTAeSCUSystemLogInvalidAuthentAtt
|
|
3 adTAeSCUSystemLogFailure
|
|
4 adTA3kPCUBusApowerAlm
|
|
5 adTAeSCUCtrpBusApowerAlm
|
|
6 adTAeSCUCtrpCardRemoved
|
|
7 adTAeSCUCtrpExt1Alm
|
|
8 adTAeSCUCtrpExt2Alm
|
|
9 adTAeSCUCtrpRmtAlm
|
|
10 adTAeSCUCtrpBlownFuse
|
|
11 DIDauthenticationFailure
|
|
12 DIDlinkDown
|
|
13 DIDLinkUp
|
|
14 Device comm
|
|
15 Service State Alarm
|
|
16 adTAeSCUAutoUpgradeConfigChanged
|
|
17 adTAeSCUAutoUpgradeInvalidConfigFile
|
|
18 adTAeSCUAutoUpgradeModuleUpgradeStarted
|
|
19 adTAeSCUAutoUpgradeModuleUpgradeCompleted
|
|
20 adTAeSCUAutoUpgradeModuleUpgradeFailed
|
|
21 adTAeSCUAutoUpgradeUnknownModule
|
|
22 Shelf 2 adTA3kPCUBusApowerAlm
|
|
23 Shelf 2 adTA3kPCUBusBpowerAlm
|
|
24 Shelf 2 adTA3kPCURmtAlm
|
|
25 Shelf 2 adTA3kPCUExt1Alm
|
|
26 Shelf 2 adTA3kPCUExt2Alm
|
|
27 Shelf 3 adTA3kPCUBusApowerAlm
|
|
28 Shelf 3 adTA3kPCUBusBpowerAlm
|
|
29 Shelf 3 adTA3kPCURmtAlm
|
|
30 Shelf 3 adTA3kPCUExt1Alm
|
|
31 Shelf 3 adTA3kPCUExt2Alm
|
|
32 Shelf 4 adTA3kPCUBusApowerAlm
|
|
33 Shelf 4 adTA3kPCUBusBpowerAlm
|
|
34 Shelf 4 adTA3kPCURmtAlm
|
|
35 Shelf 4 adTA3kPCUExt1Alm
|
|
36 Shelf 4 adTA3kPCUExt2Alm
|
|
37 Shelf 5 adTA3kPCUBusApowerAlm
|
|
38 Shelf 5 adTA3kPCUBusBpowerAlm
|
|
39 Shelf 5 adTA3kPCURmtAlm
|
|
40 Shelf 5 adTA3kPCUExt1Alm
|
|
41 Shelf 5 adTA3kPCUExt2Alm
|
|
42 Shelf 6 adTA3kPCUBusApowerAlm
|
|
43 Shelf 6 adTA3kPCUBusBpowerAlm
|
|
44 Shelf 6 adTA3kPCURmtAlm
|
|
45 Shelf 6 adTA3kPCUExt1Alm
|
|
46 Shelf 6 adTA3kPCUExt2Alm
|
|
47 Shelf 7 adTA3kPCUBusApowerAlm
|
|
48 Shelf 7 adTA3kPCUBusBpowerAlm
|
|
49 Shelf 7 adTA3kPCURmtAlm
|
|
50 Shelf 7 adTA3kPCUExt1Alm
|
|
51 Shelf 7 adTA3kPCUExt2Alm
|
|
52 Shelf 8 adTA3kPCUBusApowerAlm
|
|
53 Shelf 8 adTA3kPCUBusBpowerAlm
|
|
54 Shelf 8 adTA3kPCURmtAlm
|
|
55 Shelf 8 adTA3kPCUExt1Alm
|
|
56 Shelf 8 adTA3kPCUExt2Alm
|
|
57 adTAPCUChassisDown
|
|
58 adTAPCUChassisRemoved
|
|
59 adTAEcuRemoved
|
|
60 adTAAccessoryModuleRemoved and adTAAccessoryModuleInserted
|
|
61 adTAeSCUCardCommFail and adTAeSCUCardCommRestored
|
|
62 adTAeSCUCraftLoginNotfication
|
|
63 adTASetSingleServiceStateMsgFail
|
|
64 adTAGetSingleServiceStateMsgFail
|
|
65 adTASetAllServiceStateMsgFail
|
|
66 adTAGetAllServiceStateMsgFail
|
|
67 adTACriticalAudibleRelayActive
|
|
68 adTACriticalVisualRelayActive
|
|
69 adTAMajAudibleRelayActive
|
|
70 adTAMajVisualRelayActive
|
|
71 adTAMinorAudibleRelayActive
|
|
72 adTAMinorVisualRelayActive
|
|
73 adTAAux1RelayActive
|
|
74 adTAAux2RelayActive
|
|
75 adTACleiCodeMisMatch
|
|
76 adTAAUSoftwareVerErr
|
|
77 adTAPowerSheddingInputAsserted (deprecated)
|
|
78 adTAPowerSheddingActivated (deprecated)
|
|
|
|
*****************************************************
|
|
TA-1100F (OSP) SCM: (adTAeSCUAlarmEnable)
|
|
*****************************************************
|
|
1 adTAeSCUSystemLogFull
|
|
2 adTAeSCUSystemLogInvalidAuthentAtt
|
|
3 adTAeSCUSystemLogFailure
|
|
4 Empty/None
|
|
5 Empty/None
|
|
6 adTADeviceInserted_Removed
|
|
7 Empty/None
|
|
8 Empty/None
|
|
9 Empty/None
|
|
10 Empty/None
|
|
11 DIDauthenticationFailure
|
|
12 Empty/None
|
|
13 Empty/None
|
|
14 Empty/None
|
|
15 ServiceStateAlarm
|
|
16 adTAeSCUAutoUpgradeConfigChanged
|
|
17 adTAeSCUAutoUpgradeInvalidConfigFile
|
|
18 adTAeSCUAutoUpgradeModuleUpgradeStarted
|
|
19 adTAeSCUAutoUpgradeModuleUpgradeCompleted
|
|
20 adTAeSCUAutoUpgradeModuleUpgradeFailed
|
|
21 adTAeSCUAutoUpgradeUnknownModule
|
|
22 Empty/None
|
|
23 Empty/None
|
|
24 adTADeviceMgmtFail / adTADeviceMgmtRestored
|
|
25 adTAeSCUCraftLoginNotfication
|
|
26 adTASetSingleServiceStateMsgFail (Deprecated)
|
|
27 adTAGetSingleServiceStateMsgFail (Deprecated)
|
|
28 adTASetAllServiceStateMsgFail
|
|
29 adTAGetAllServiceStateMsgFail
|
|
30 adTACleiCodeMisMatch
|
|
31 adTAAUSoftwareVerErr
|
|
32 Auxiliary Input 1 Alarm
|
|
33 Auxiliary Input 2 Alarm
|
|
34 Auxiliary Input 3 Alarm
|
|
35 Auxiliary Input 4 Alarm
|
|
36 Auxiliary Input 5 Alarm
|
|
37 System Alarm Severity Alarm
|
|
38 System Inactive Account Alarm
|
|
39 adTACriticalAudibleRelayActive
|
|
40 adTAMajAudibleRelayActive
|
|
41 adTAMinorAudibleRelayActive
|
|
42 adTaSysCtrlRebootException (duplicated by adTASysModuleRestart)
|
|
43 adTAModuleProvisionChange
|
|
44 adTAeScmFlashDataFileError
|
|
68 adTACriticalVisualRelayActive
|
|
70 adTAMajVisualRelayActive
|
|
72 adTAMinorVisualRelayActive
|
|
73 adTaSysCtrlAutoUpgradeEOSSWarning Active/Clear
|
|
74 adTaSysCtrlAutoUpgradeEOSSDenied Active/Clear
|
|
|
|
*****************************************************
|
|
TA-5000 SCM: (adTAeSCUAlarmEnable)
|
|
*****************************************************
|
|
1 adTAeSCUSystemLogFull
|
|
2 adTAeSCUSystemLogInvalidAuthentAtt
|
|
3 adTAeSCUSystemLogFailure
|
|
4 adTAeSCUCtrpBusApowerAlm and adTAeSCUCtrpBusApwrAlmClear
|
|
5 adTAeSCUCtrpBusBpowerAlm and adTAeSCUCtrpBusBpwrAlmClear
|
|
6 adTAeSCUCtrpCardInserted and adTAeSCUCtrpCardRemoved
|
|
7 adTAeSCUCtrpExt1Alm and adTAeSCUCtrpExt1AlmClear
|
|
8 adTAeSCUCtrpExt2Alm and adTAeSCUCtrpExt2AlmClear
|
|
9 adTAeSCUCtrpRmtAlm and adTAeSCUCtrpRmtAlmClear
|
|
10 adTAeSCUCtrpBlownFuse
|
|
11 DIDauthenticationFailure
|
|
12 DIDlinkDown
|
|
13 DIDlinkUp
|
|
14 No SNMP support - Device comm failure Active and Device comm failure Clear
|
|
15 Service State alarms
|
|
16 adTAeSCUAutoUpgradeConfigChanged
|
|
17 adTAeSCUAutoUpgradeInvalidConfigFile
|
|
18 adTAeSCUAutoUpgradeModuleUpgradeStarted
|
|
19 adTAeSCUAutoUpgradeModuleUpgradeCompleted
|
|
20 adTAeSCUAutoUpgradeModuleUpgradeFailed
|
|
21 adTAeSCUAutoUpgradeUnknownModule
|
|
22 adTAPowerSheddingInputAsserted (deprecated)
|
|
23 adTAPowerSheddingActivated (deprecated)
|
|
24 adTAeSCUCardCommFail and adTAeSCUCardCommRestored
|
|
25 Fan Auxiliary Input 1 Alarm
|
|
26 Fan Auxiliary Input 2 Alarm
|
|
27 Fan Auxiliary Input 3 Alarm
|
|
28 Fan Auxiliary Input 4 Alarm
|
|
29 Fan Auxiliary Input 5 Alarm
|
|
30 Fan Auxiliary Input 6 Alarm
|
|
31 Fan Auxiliary Input 7 Alarm
|
|
32 Fan Auxiliary Input 8 Alarm
|
|
33 Fan Auxiliary Input 9 Alarm
|
|
34 Fan Auxiliary Input 10 Alarm
|
|
35 Fan Auxiliary Input 11 Alarm
|
|
36 Fan Auxiliary Input 12 Alarm
|
|
37 Fan Auxiliary Input 13 Alarm
|
|
38 Fan Auxiliary Input 14 Alarm
|
|
39 Fan Auxiliary Input 15 Alarm
|
|
40 Fan Auxiliary Input 16 Alarm
|
|
41 adTAeSCUCraftLoginNotfication
|
|
42 adTASetSingleServiceStateMsgFail (Deprecated)
|
|
43 adTAGetSingleServiceStateMsgFail (Deprecated)
|
|
44 adTASetAllServiceStateMsgFail
|
|
45 adTAGetAllServiceStateMsgFail
|
|
46 adTACriticalAudibleRelayActive
|
|
47 adTACriticalVisualRelayActive
|
|
48 adTAMajAudibleRelayActive
|
|
49 adTAMajVisualRelayActive
|
|
50 adTAMinorAudibleRelayActive
|
|
51 adTAMinorVisualRelayActive
|
|
52 Empty/None
|
|
53 Empty/None
|
|
54 adTACleiCodeMisMatch
|
|
55 adTAAUSoftwareVerErr
|
|
56 adTAeSCUSystemInactiveAccountExpiration
|
|
57 adTASCM5kChassisLinkStatusDown
|
|
58 adTASCM5kChassisRemoved
|
|
59 adTASysModuleRestart
|
|
60 adTaSysCtrlRebootException
|
|
61 adTAeSysSystemDataError
|
|
62 coldStart
|
|
63 warmStart
|
|
64 adGenProcessesHeapFreeThreshCrossed
|
|
65 adTASysCtrlCardNotSensed
|
|
66 adTASysCtrlCardNotReady
|
|
67 adTaSysCtrlAutoUpgradeEOSSWarning Active/Clear
|
|
68 adTaSysCtrlAutoUpgradeEOSSDenied Active/Clear"
|
|
|
|
::= { adTAeSCUAlarmMg 1 }
|
|
|
|
adTAeSCUResendAllSnmpTraps OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
resendAllSnmpUnconfirmedTraps(1),-- Resend all snmp open traps
|
|
getResponse(2),
|
|
resendAllActiveAlarms(3) -- Resend all active alarms on the system
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"resendAllSnmpUnconfirmedTrapsv(1) - Resend all unconfirmed SNMP traps in SNMP trap Chache.
|
|
See adTrapInformCache (1.3.6.1.4.1.664.5.16.2.1.1.7)
|
|
getResponse(2) - A generic value received on a get. Means nothing.
|
|
resendAllActiveAlarms - Resend all active alarms in the Chassis."
|
|
|
|
::= { adTAeSCUAlarmMg 5 }
|
|
|
|
-- *******************************************************************************************************
|
|
-- Provide an extension to the adGetSlot table.
|
|
adGenSlotExtension OBJECT IDENTIFIER ::= { adTAeSCUmg 22 }
|
|
|
|
adGenSlotInfoStateSaveNVRAM OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable saving the adGenSlotInfoState in NV RAM."
|
|
::= { adGenSlotExtension 1 }
|
|
|
|
|
|
adGenSlotInfoScuExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenSlotInfoScuExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of slots available for boards."
|
|
::= { adGenSlotExtension 3 }
|
|
|
|
adGenSlotInfoScuExtEntry OBJECT-TYPE
|
|
SYNTAX AdGenSlotInfoScuExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { adGenSlotInfoIndex }
|
|
::= { adGenSlotInfoScuExtTable 1 }
|
|
|
|
AdGenSlotInfoScuExtEntry ::=
|
|
SEQUENCE {
|
|
adGenSlotInfoStateExtension
|
|
AdPresence
|
|
}
|
|
|
|
adGenSlotInfoStateExtension OBJECT-TYPE
|
|
SYNTAX AdPresence
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows forcing slot with adGenSlotInfoState of virtual state to empty.
|
|
adGenSlotInfoStateExtension will only accept a value Empty(2). If a
|
|
card is present but defective adGenSlotInfoState will remain Virtual."
|
|
::= { adGenSlotInfoScuExtEntry 1 }
|
|
-- ********************************************************************************************************
|
|
-- File Transfer Selection.
|
|
adTAeFileTransferMgmt OBJECT IDENTIFIER ::= { adTAeSCUmg 24 }
|
|
adTAeSCUFileTransferMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ftmTFTP(1),
|
|
ftmFTOT(2),
|
|
ftmFTP(3),
|
|
ftmSFTP(4),
|
|
ftmLFFS(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"File transfer method to use to transfer files to and from the controller.
|
|
ftmTFTP(1) indicates TFTP transfer protocol.
|
|
ftmFTOT(2) indicates FTOT transfer protocol.
|
|
ftmFTP(3) indicates FTP transfer protocol.
|
|
ftmSFTP(4) indicates SFTP transfer protocol.
|
|
ftmLFFS(5) indicates Local Flash File System for OPTI-6100 SCM2 only."
|
|
::= { adTAeFileTransferMgmt 5 }
|
|
|
|
|
|
adTAeSCUFileTransferUserID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the contents of the User ID field for
|
|
file transfer protocols that require it, such as
|
|
FTP."
|
|
::= { adTAeFileTransferMgmt 10 }
|
|
|
|
adTAeSCUFileTransferPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the contents of the password field for
|
|
file transfer protocols that require it, such as
|
|
FTP."
|
|
::= { adTAeFileTransferMgmt 11 }
|
|
|
|
adTAeSCUFileTransferFirmwarePath OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies an optional path preceding the firmware
|
|
filename for file transfer protocols that may need
|
|
it, such as FTOT and FTP."
|
|
::= { adTAeFileTransferMgmt 12 }
|
|
|
|
adTAeSCUFileTransferReceiveStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the most recent remote file
|
|
get/read/receive operation."
|
|
::= { adTAeFileTransferMgmt 13 }
|
|
|
|
adTAeSCUFileTransferSendStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the most recent remote file
|
|
put/write/send operation."
|
|
::= { adTAeFileTransferMgmt 14 }
|
|
|
|
|
|
-- ********************************************************************************************************
|
|
-- ********************************************************************************************************
|
|
-- IP Access Control.
|
|
--adTAeIPNetworkMgmt OBJECT IDENTIFIER ::= { adTAeSCUNetworkMgmt 20 }
|
|
|
|
adTaIPServicePortProvMgmt OBJECT IDENTIFIER ::= { adTAeSCUNetworkMgmt 20 }
|
|
|
|
adTaIPAccessPortMgmt OBJECT IDENTIFIER ::= { adTAeSCUNetworkMgmt 22 }
|
|
|
|
adTaSnmpIPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
sSHTunnelOnly(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set SNMP IP port Access mode.
|
|
Enable(1) - Enable SNMP IP port access.
|
|
Disable(2) - Disable SNMP IP port access.
|
|
SSHTunnelOnly(3) - Enabled SNMP Server IP port using a SSH tunnels."
|
|
::= { adTaIPAccessPortMgmt 5 }
|
|
|
|
|
|
adTaTL1IPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
sSHTunnelOnly(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set TL1 IP port Access mode.
|
|
Enable(1) - Enable TL1 IP port access.
|
|
Disable(2) - Disable TL1 IP port access.
|
|
SSHTunnelOnly(3) - Enabled Terminal Server IP port Access using a SSH tunnels."
|
|
::= { adTaIPAccessPortMgmt 7 }
|
|
|
|
adTaMenuIPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
sSHTunnelOnly(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Menu Server IP port Access mode.
|
|
Enable(1) - Enable Menu Server IP port access.
|
|
Disable(2) - Disable Menu Server IP port access.
|
|
SSHTunnelOnly(3) - Enabled Menu Server IP port Access using a SSH tunnels."
|
|
::= { adTaIPAccessPortMgmt 9 }
|
|
|
|
adTaTerminalServerIPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
sSHTunnelOnly(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set Terminal Server IP port Access mode.
|
|
Enable(1) - Enable Terminal Server IP Access port.
|
|
Disable(2) - Disable Terminal Server IP Access port.
|
|
SSHTunnelOnly(3) - Enabled Terminal Server IP port Access using a SSH tunnels."
|
|
::= { adTaIPAccessPortMgmt 11 }
|
|
|
|
adTaSSHIPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable SSH IP port 22.
|
|
Enable(1) - Enable SSH IP port 22.
|
|
Disable(2) - Disable SSH IP port 22."
|
|
::= { adTaIPAccessPortMgmt 13 }
|
|
|
|
adTaSSHIPTunnelsAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable SSH Tunnels Access.
|
|
Enable(1) - Enable SSH Tunnels access.
|
|
Disable(2) - Disabled SSH Tunnels access."
|
|
::= { adTaIPAccessPortMgmt 15 }
|
|
|
|
adTaCLIIPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2),
|
|
sSHTunnelOnly(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set CLI IP port Access mode.
|
|
Enable(1) - Enable CLI IP port access.
|
|
Disable(2) - Disable CLI IP port access.
|
|
SSHTunnelOnly(3) - Enabled Terminal Server IP port Access using a SSH tunnels."
|
|
::= { adTaIPAccessPortMgmt 17 }
|
|
|
|
adTaHTTPIPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set HTTP IP port Access mode.
|
|
Enable(1) - Enable HTTP IP port access.
|
|
Disable(2) - Disable HTTP IP port access."
|
|
::= { adTaIPAccessPortMgmt 18 }
|
|
|
|
adTaHTTPSIPAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set HTTPS IP port Access mode.
|
|
Enable(1) - Enable HTTPS IP port access.
|
|
Disable(2) - Disable HTTPS IP port access."
|
|
::= { adTaIPAccessPortMgmt 19 }
|
|
|
|
--
|
|
--
|
|
--
|
|
adTaTL1TelnetPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TL1 Telnet port number."
|
|
::= { adTaIPServicePortProvMgmt 1 }
|
|
|
|
adTaTL1RawTCPPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TL1 Raw-TCP port number."
|
|
::= { adTaIPServicePortProvMgmt 3 }
|
|
|
|
adTaSecondaryTelnetPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary Telnet port number."
|
|
::= { adTaIPServicePortProvMgmt 5 }
|
|
|
|
adTaNtwkTerminalTelnetPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ntwk Terminal Server Telnet Port."
|
|
::= { adTaIPServicePortProvMgmt 6 }
|
|
|
|
adTaAdminTerminalTelnetPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admin Terminal Server Telnet Port."
|
|
::= { adTaIPServicePortProvMgmt 7 }
|
|
|
|
adTaCraftTerminalTelnetPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Craft Terminal Server Telnet Port."
|
|
::= { adTaIPServicePortProvMgmt 8 }
|
|
|
|
adTaTL1SSHPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TL1 SSH Port."
|
|
::= { adTaIPServicePortProvMgmt 9 }
|
|
|
|
adTaSecondarySSHPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Seconday SSH Port."
|
|
::= { adTaIPServicePortProvMgmt 10 }
|
|
|
|
adTaCLITelnetPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLI Telnet Port."
|
|
::= { adTaIPServicePortProvMgmt 11 }
|
|
|
|
adTaCLISSHPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1024..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CLI SSH Port."
|
|
::= { adTaIPServicePortProvMgmt 12 }
|
|
|
|
adTaSFTPPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SFTP Port to connect to."
|
|
::= { adTaIPServicePortProvMgmt 13 }
|
|
|
|
|
|
adTaTelnetDeadClientDetection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Telnet Dead Client Detection."
|
|
::= { adTaIPServicePortProvMgmt 17 }
|
|
|
|
adTaRFC1122TCPDeadClientDetection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RFC1122 TCP Dead Client Detection."
|
|
::= { adTaIPServicePortProvMgmt 19 }
|
|
|
|
-- ********************************************************************************************************
|
|
-- ********************************************************************************************************
|
|
-- Admin Port Control.
|
|
adTAeSCUAdminPort OBJECT IDENTIFIER ::= { adTAeSCUNetworkMgmt 24 }
|
|
|
|
adTAeSCUAdminPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
menus(1),
|
|
tl1(2),
|
|
tl1TestAccess(3),
|
|
terminalServer(4),
|
|
cLI(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admin port communication mode."
|
|
::= { adTAeSCUAdminPort 1 }
|
|
|
|
adTAeSCUAdminPortModeOpti OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
menus(1),
|
|
tl1(2),
|
|
terminalServer(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admin port communication mode for systems that do NOT
|
|
support tl1TestAccess."
|
|
::= { adTAeSCUAdminPort 2 }
|
|
|
|
adTAeSCUAdminPortUseRtsCts OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled the controller will use the RS-232
|
|
Request To Send (RTS) and Clear To Send (CTS)
|
|
signals for Admin port communication."
|
|
::= { adTAeSCUAdminPort 3 }
|
|
|
|
|
|
adTAeSCUAdminPortCarrierLoss OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled the controller will terminate the menu session
|
|
on the loss of the RS-232 Data Carrier Detect (DCD) signal
|
|
for Admin port communication."
|
|
::= { adTAeSCUAdminPort 4 }
|
|
|
|
adTAeSCUAdminPortDtrLogout OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled the controller will De-assert/Drop the RS-232
|
|
Data Terminal Ready (DTR) signal on menu logouts for
|
|
Admin port communications."
|
|
::= { adTAeSCUAdminPort 5 }
|
|
|
|
|
|
-- ********************************************************************************************************
|
|
-- Generic Chassis Traps
|
|
|
|
|
|
adTAeSCUCtrpBlownFuse NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex,
|
|
adTAeSCUTrapAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Blown Fuse Alarm is active on module"
|
|
--#TYPE "Major - Blown Fuse Alarm is active on module"
|
|
--#SUMMARY "adTAeSCU 24125: Blown Fuse Alarm active;"
|
|
--#SUMMARY "detected at shelf: %s, slot: %d"
|
|
--#ARGUMENTS { 1, 2 }
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24125 }
|
|
|
|
adTAeSCUCtrpCardInserted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex,
|
|
adTAeSCUTrapAlarmLevel,
|
|
adGenSlotProdName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A card has been inserted into the chassis.
|
|
Optional unlisted varbind VARIABLES:
|
|
adGenSlotProdName indicate the card name that
|
|
was removed. Only certain versions of
|
|
controller code will return this varbind.
|
|
"
|
|
--#TYPE "Informational - A card has been inserted into the chassis"
|
|
--#SUMMARY "TAeSCU 24126: Card inserted into chassis;"
|
|
--#SUMMARY "detected at chassis: %s, slot: %d"
|
|
--#ARGUMENTS { 1, 2 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Configuration Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24126 }
|
|
|
|
|
|
adTAeSCUCtrpCardRemoved NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex,
|
|
adTAeSCUTrapAlarmLevel,
|
|
adGenSlotProdName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A card has been removed from the chassis
|
|
Optional unlisted varbind VARIABLES:
|
|
adGenSlotProdName indicate the card name that
|
|
was removed. Only certain versions of
|
|
controller code will return this varbind.
|
|
"
|
|
--#TYPE "Warning - A card has been removed from the chassis"
|
|
--#SUMMARY "TAeSCU 24127: Card removed from chassis;"
|
|
--#SUMMARY "detected at chassis: %s, slot: %d"
|
|
--#ARGUMENTS { 1, 2 }
|
|
--#SEVERITY WARNING
|
|
--#GENERIC 6
|
|
--#CATEGORY "Configuration Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24127 }
|
|
|
|
|
|
adTAeSCUCtrpRmtAlmClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Input Alarm clear"
|
|
--#TYPE "Informational - Remote Input Alarm clear"
|
|
--#SUMMARY "TAeSCU 24128: Remote Input Alarm cleared;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24128 }
|
|
|
|
adTAeSCUCtrpRmtAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Input Alarm active"
|
|
--#TYPE "Major - Remote Input Alarm active"
|
|
--#SUMMARY "TAeSCU 24129: Remote Input Alarm active;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24129 }
|
|
|
|
adTAeSCUCtrpExt1AlmClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"External Input #1 Alarm clear"
|
|
--#TYPE "Informational - External Input #1 Alarm clear"
|
|
--#SUMMARY "TAeSCU 24130: External Input #1 Alarm cleared;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24130 }
|
|
|
|
adTAeSCUCtrpExt1Alm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"External Input #1 Alarm active"
|
|
--#TYPE "Major - External Input #1 Alarm active"
|
|
--#SUMMARY "TAeSCU 24131: External Input #1 Alarm active;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24131 }
|
|
|
|
adTAeSCUCtrpExt2AlmClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"External Input #2 Alarm clear"
|
|
--#TYPE "Informational - External Input #2 Alarm clear"
|
|
--#SUMMARY "TAeSCU 24132: External Input #2 Alarm cleared;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24132 }
|
|
|
|
adTAeSCUCtrpExt2Alm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"External Input #2 Alarm active"
|
|
--#TYPE "Major - External Input #2 Alarm active"
|
|
--#SUMMARY "TAeSCU 24133: External Input #2 Alarm active;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24133 }
|
|
|
|
adTAeSCUCtrpBusApwrAlmClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bus A Power Failure Alarm clear"
|
|
--#TYPE "Informational - Bus A Power Failure Alarm clear"
|
|
--#SUMMARY "TAeSCU 24134: Bus A Power Failure Alarm cleared;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24134 }
|
|
|
|
adTAeSCUCtrpBusApowerAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bus A Power Failure Alarm active"
|
|
--#TYPE "Major - Bus A Power Failure Alarm active"
|
|
--#SUMMARY "TAeSCU 24135: Bus A Power Failure Alarm active;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24135 }
|
|
|
|
adTAeSCUCtrpBusBpwrAlmClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bus B Power Failure Alarm clear"
|
|
--#TYPE "Informational - Bus B Power Failure Alarm clear"
|
|
--#SUMMARY "TAeSCU 24136: Bus B Power Failure Alarm cleared;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24136 }
|
|
|
|
adTAeSCUCtrpBusBpowerAlm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUenvAlarmUserName,
|
|
adTAeSCUenvAlarmInputLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bus B Power Failure Alarm active"
|
|
--#TYPE "Major - Bus B Power Failure Alarm active"
|
|
--#SUMMARY "TAeSCU 24137: Bus B Power Failure Alarm active;"
|
|
--#SUMMARY "detected at shelf: %s"
|
|
--#ARGUMENTS { 1 }
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24137 }
|
|
|
|
adTAeSCUCardCommRestored NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex,
|
|
adTAeSCUTrapAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Communication with a card has been restored"
|
|
--#TYPE "Informational - Communication with card restored"
|
|
--#SUMMARY "TAeSCU 24138: Communication with card restored;"
|
|
--#SUMMARY "detected at chassis: %s, slot: %d"
|
|
--#ARGUMENTS { 1, 2 }
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24138 }
|
|
|
|
|
|
adTAeSCUCardCommFail NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex,
|
|
adTAeSCUTrapAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Communication with a card has failed"
|
|
--#TYPE "Warning - Communication with card failed"
|
|
--#SUMMARY "TAeSCU 24139: Communication with card failed;"
|
|
--#SUMMARY "detected at chassis: %s, slot: %d"
|
|
--#ARGUMENTS { 1, 2 }
|
|
--#SEVERITY MAJOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24139 }
|
|
|
|
adTAeSCUCraftLoginClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUSecAccountUserID,
|
|
adTAeSCUCraftLoginAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Craft Login Clear. User Loged Out."
|
|
--#TYPE "Warning - Craft Account Log Out."
|
|
--#SUMMARY "TAeSCU 24164: Craft Log Out Account ID %d.;"
|
|
--#SUMMARY "detected at chassis: %s"
|
|
--#ARGUMENTS { 1,2}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Log Out Event"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24164 }
|
|
adTAeSCUCraftLoginNotfication NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUSecAccountUserID,
|
|
adTAeSCUCraftLoginAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Craft Login notification."
|
|
--#TYPE "Warning - Craft Account Login."
|
|
--#SUMMARY "TAeSCU 24165: Craft Login Notification Account ID %d.;"
|
|
--#SUMMARY "detected at chassis: %s"
|
|
--#ARGUMENTS { 1,2}
|
|
--#SEVERITY INFORMATIONAL
|
|
--#GENERIC 6
|
|
--#CATEGORY "Login Event"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24165 }
|
|
|
|
adTASysCtrlInvalidControllerClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUTrapAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An invalid controller alarm cleared."
|
|
--#TYPE "Warning - Invalid controller installed."
|
|
--#SUMMARY "TAeSCU 24168: Invalid controller installed;"
|
|
--#SUMMARY "detected at chassis: %s, slot: %d"
|
|
--#ARGUMENTS { 1, 2 }
|
|
--#SEVERITY MINOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24168 }
|
|
|
|
adTASysCtrlInvalidController NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adTAeSCUTrapAlarmLevel
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An invalid controller module has been installed."
|
|
--#TYPE "Warning - Invalid controller installed."
|
|
--#SUMMARY "TAeSCU 24169: Invalid controller installed;"
|
|
--#SUMMARY "detected at chassis: %s, slot: %d"
|
|
--#ARGUMENTS { 1, 2 }
|
|
--#SEVERITY MINOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24169 }
|
|
|
|
adTASysModuleRestart NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex,
|
|
adTAeSCUTrapAlarmLevel,
|
|
adGenSlotProdName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The module has restarted."
|
|
--#TYPE "Warning - The module has restarted."
|
|
--#SUMMARY "Controller 24170: The module has restarted;"
|
|
--#SUMMARY "detected at chassis: %s, slot: %d"
|
|
--#ARGUMENTS { 1, 2 }
|
|
--#SEVERITY WARNING
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adTAeSCUmgNotificationEvents 24170 }
|
|
|
|
-- to do
|
|
-- I just added "Logoff Craft Port When DTR Lost" functionality to the
|
|
-- eSCU, and we gotta support it with snmp.
|
|
|
|
-- This value is a simple enable/disable value.
|
|
|
|
-- When set to ENABLE, this provision has the effect of closing or
|
|
-- forcing a 'logout' of any active CRAFT session when we sense an
|
|
-- absence of the RS-232 DTR signal.
|
|
|
|
|
|
END
|
|
|