WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/adtran/ADTRAN-GENIF-MIB

540 lines
17 KiB
Plaintext
Raw Blame History

ADTRAN-GENIF-MIB
-- TITLE: The ADTRAN GENIF MIB
-- PRODUCT: ADTRAN PRODUCTS
-- VERSION: 1.0
-- DATE: 11/17/2008
-- AUTHOR: Chip Gusler
-- STATUS: PRELIMINARY
-- This MIB defines the object identifier (OID) for the
-- ADTRAN-GENIF-MIB objects. This will is a supplement to the existing
-- IF-MIB. It is intended to provide Adtran generic extensions on a
-- per-interface basis.
-- HISTORY:
-- 11/17/08 ltg Created
-- 06/15/09 glf Modified to add Auto In Service Feature
-- 07/09/09 glf Modified to add new OID adGenIfAutoInServiceTimeOutCounter and to
-- change enums to adGenIfAutoInServiceStatus
-- 09/22/09 srao Added traps for interface service state OOS-MA active/clear and an OID for enabling/disabling this alarm.
-- 10/28/09 srao Interchanged the values of enable/disable of the OID adGenIfServiceStateOOSMAAlarmEnable
-- 02/28/11 twc Deprecated adGenIfResetCounters, added adGenIfResetAllPM and adGenIfResetAllCounters
-- ******************************************************************************************
DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32,Counter64,Gauge32,Counter32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
sysName
FROM SNMPv2-MIB
ifIndex, ifDescr, ifAdminStatus FROM IF-MIB
TruthValue FROM SNMPv2-TC
adGenIf, adGenIfID
FROM ADTRAN-SHARED-CND-SYSTEM-MIB
adGenSlotInfoIndex FROM ADTRAN-GENSLOT-MIB
adTrapInformSeqNum
FROM ADTRAN-GENTRAPINFORM-MIB
;
adGenIfMIB MODULE-IDENTITY
LAST-UPDATED "201305310000Z"
ORGANIZATION "Adtran, Inc."
CONTACT-INFO "http://www.adtran.com"
DESCRIPTION
"Adtran enterprise generic IF-MIB extensions."
REVISION "201305310000Z"
DESCRIPTION "Obsolete the Port OOS-MA alarm and the associated enable/disable provisioning."
REVISION "201112160000Z"
DESCRIPTION "Added discards to 15 minute and 24 hour PM"
REVISION "201112060000Z"
DESCRIPTION "Multicast, unicast and broadcast counter OIDs"
REVISION "201102280000Z"
DESCRIPTION "New generic reset PM and reset counter OIDs"
REVISION "200811170000Z"
DESCRIPTION "Created"
::= { adGenIfID 1 }
-- OBJECT IDENTIFIERS
adGenIfMIBObjects OBJECT IDENTIFIER ::= {adGenIf 1}
-- ******************************************************************************************
-- adGenIfTable
-- ******************************************************************************************
adGenIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports Adtran per-interface IF-MIB extensions.
The number of entries is given by the value of ifNumber."
::= { adGenIfMIBObjects 1 }
adGenIfEntry OBJECT-TYPE
SYNTAX AdGenIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Adtran specific control/information applicable
to the indexed interface."
INDEX { ifIndex }
::= { adGenIfTable 1 }
AdGenIfEntry ::=
SEQUENCE
{
adGenIfResetCounters INTEGER, -- deprecated
adGenIfAutoInServiceEnable TruthValue,
adGenIfAutoInServiceTimeOut INTEGER,
adGenIfAutoInServiceTimeOutCounter Integer32,
adGenIfAutoInServiceStatus INTEGER,
adGenIfServiceStateOOSMAAlarmEnable INTEGER,
adGenIfResetAllCounters INTEGER,
adGenIfResetAllPM INTEGER,
adGenIfInUnicastOctets Counter64,
adGenIfOutUnicastOctets Counter64,
adGenIfInBroadcastOctets Counter64,
adGenIfOutBroadcastOctets Counter64,
adGenIfOutDiscardedOctets Counter64,
adGenIfInMulticastOctets Counter64,
adGenIfOutMulticastOctets Counter64,
adGenIfInFrames Counter64,
adGenIfOutFrames Counter64
}
adGenIfResetCounters OBJECT-TYPE -- deprecated
SYNTAX INTEGER
{
all(1), -- Reset both PM history and current counters
pmhistory(2), -- Reset PM history counters
current(3) -- Reset current counters
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is deprecated due to confusion among users regarding its intended
purpose. Two new objects (adGenIfResetAllPM and adGenIfResetAllCounters) should
be used instead. The original description text is below:
Selection of counter types to reset/clear for the indexed interface.
The counter types are performance monitoring intervals (PM history)
which typically consist of 15 minute/24 hour interval data,
and current counters. A read will always return all(1)."
::= { adGenIfEntry 1 }
adGenIfAutoInServiceEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to true to enable and false to disable auto in service on this interface."
DEFVAL {false}
::= { adGenIfEntry 2 }
adGenIfAutoInServiceTimeOut OBJECT-TYPE
SYNTAX INTEGER (1..9999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the timeout value in minutes "
DEFVAL {480}
::= { adGenIfEntry 3 }
adGenIfAutoInServiceTimeOutCounter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns time remaining on the AINS timer "
::= { adGenIfEntry 4 }
adGenIfAutoInServiceStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), --Able to run traffic
down(2), --Some defect (e.g. LOS, LOF) does not permit traffic to run
testing(3), --BERT and/or loopback in progress
oosAuAinsFaf(4),--Out of Service-Autonomous Automatic In Service with facility faults
oosAuAins(5), --Out of Service-Autonomous Automatic In Service w/o facility faults
oosAuAinsTs(6) --Out of Service-Autonomous Automatic In Service Testing
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The facility service state."
::= { adGenIfEntry 5 }
adGenIfServiceStateOOSMAAlarmEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Enables/disables the interface service state OOS-MA alarm."
::= { adGenIfEntry 6 }
adGenIfResetAllPM OBJECT-TYPE
SYNTAX INTEGER
{
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A SET causes all Performance Monitoring history for the selected interface to be reset to zero.
This will reset all interval PM counts (15min and 24hr) as well as the current PM counts
(15min and 24hr) for the selected interface. This object has NO affect on rolling counters.
A GET will always return a one (1)."
::= { adGenIfEntry 7 }
adGenIfResetAllCounters OBJECT-TYPE
SYNTAX INTEGER
{
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A SET causes all rolling counters for the selected interface to be reset to zero.
This object has NO affect on PM. A GET will always return a one (1)."
::= { adGenIfEntry 8 }
adGenIfInUnicastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast octets received on the interface."
::= { adGenIfEntry 9 }
adGenIfOutUnicastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unicast octets transmitted on the interface."
::= { adGenIfEntry 10 }
adGenIfInBroadcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of broadcast octets received on the interface."
::= { adGenIfEntry 11 }
adGenIfOutBroadcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of broadcast octets transmitted on the interface."
::= { adGenIfEntry 12 }
adGenIfInMulticastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast octets received on the interface."
::= { adGenIfEntry 13 }
adGenIfOutMulticastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast octets transmitted on the interface."
::= { adGenIfEntry 14 }
adGenIfOutDiscardedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Tx discarded octets on the interface."
::= { adGenIfEntry 15 }
adGenIfInFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Rx frames on the interface."
::= { adGenIfEntry 16 }
adGenIfOutFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Tx frames on the interface."
::= { adGenIfEntry 17 }
-- *********************************************************************
-- adGenIfCurr15MinPMTable
-- *********************************************************************
adGenIfCurr15MinPMTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenIfCurr15MinPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports Adtran per-interface IF-MIB extensions
for current 15-minute performance monitoring."
::= { adGenIfMIBObjects 2 }
adGenIfCurr15MinPMEntry OBJECT-TYPE
SYNTAX AdGenIfCurr15MinPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Adtran specific control/information applicable
to the indexed interface."
INDEX { ifIndex }
::= { adGenIfCurr15MinPMTable 1 }
AdGenIfCurr15MinPMEntry ::=
SEQUENCE
{
adGenIfCurr15MinPMOutDiscards Gauge32,
adGenIfCurr15MinPMOutDiscardOctets Gauge32
}
adGenIfCurr15MinPMOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded on this interface during
the current 15-minute interval."
::= { adGenIfCurr15MinPMEntry 1 }
adGenIfCurr15MinPMOutDiscardOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets discarded on this interface during
the current 15-minute interval."
::= { adGenIfCurr15MinPMEntry 2 }
-- *********************************************************************
-- adGenIf15MinPMTable
-- *********************************************************************
adGenIf15MinPMTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenIf15MinPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports Adtran per-interface IF-MIB extensions
for 15 minute performance monitoring."
::= { adGenIfMIBObjects 3 }
adGenIf15MinPMEntry OBJECT-TYPE
SYNTAX AdGenIf15MinPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Adtran specific control/information applicable
to the indexed interface."
INDEX { ifIndex, adGenIf15MinPMIntNumber }
::= { adGenIf15MinPMTable 1 }
AdGenIf15MinPMEntry ::=
SEQUENCE
{
adGenIf15MinPMIntNumber Integer32,
adGenIf15MinPMOutDiscards Gauge32,
adGenIf15MinPMOutDiscardOctets Gauge32
}
adGenIf15MinPMIntNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15-minute performance interval. Interval 1 represents the most recent
previous interval. Interval 96 represents 24 hours ago. Intervals 2
through 96 are optional."
::= { adGenIf15MinPMEntry 1 }
adGenIf15MinPMOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded on this interface during
the selected 15-minute interval."
::= { adGenIf15MinPMEntry 2 }
adGenIf15MinPMOutDiscardOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes discarded on this interface during
the selected 15-minute interval."
::= { adGenIf15MinPMEntry 3 }
-- *********************************************************************
-- adGenIfCurr24HrPMTable
-- *********************************************************************
adGenIfCurr24HrPMTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenIfCurr24HrPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports Adtran per-interface IF-MIB extensions
for current 24 hour performance monitoring."
::= { adGenIfMIBObjects 4 }
adGenIfCurr24HrPMEntry OBJECT-TYPE
SYNTAX AdGenIfCurr24HrPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Adtran specific control/information applicable
to the indexed interface."
INDEX { ifIndex }
::= { adGenIfCurr24HrPMTable 1 }
AdGenIfCurr24HrPMEntry ::=
SEQUENCE
{
adGenIfCurr24HrPMOutDiscards Gauge32,
adGenIfCurr24HrPMOutDiscardOctets Gauge32
}
adGenIfCurr24HrPMOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded on this interface during
the current 24-hour interval."
::= { adGenIfCurr24HrPMEntry 1 }
adGenIfCurr24HrPMOutDiscardOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets discarded on this interface during
the current 24-hour interval."
::= { adGenIfCurr24HrPMEntry 2 }
-- *********************************************************************
-- adGenIf24HrPMTable
-- *********************************************************************
adGenIf24HrPMTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenIf24HrPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports Adtran per-interface IF-MIB extensions
for 24 hour performance monitoring."
::= { adGenIfMIBObjects 5 }
adGenIf24HrPMEntry OBJECT-TYPE
SYNTAX AdGenIf24HrPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Adtran specific control/information applicable
to the indexed interface."
INDEX { ifIndex, adGenIf24HrPMIntNumber }
::= { adGenIf24HrPMTable 1 }
AdGenIf24HrPMEntry ::=
SEQUENCE
{
adGenIf24HrPMIntNumber Integer32,
adGenIf24HrPMOutDiscards Gauge32,
adGenIf24HrPMOutDiscardOctets Gauge32
}
adGenIf24HrPMIntNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"24-hour performance interval. Interval 1 represents the most recent
previous interval. Interval 30 represents 30 days ago. Intervals 2
through 30 are optional."
::= { adGenIf24HrPMEntry 1 }
adGenIf24HrPMOutDiscards OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded on this interface during
the selected 24-hour interval."
::= { adGenIf24HrPMEntry 2 }
adGenIf24HrPMOutDiscardOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets discarded on this interface during
the selected 24-hour interval."
::= { adGenIf24HrPMEntry 3 }
-- ******************************************************************************************
-- Alarms
-- ******************************************************************************************
adGenIfAlarms OBJECT IDENTIFIER ::= { adGenIf 0 }
adGenIfServiceStateOOSMAClear NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
ifDescr
}
STATUS obsolete
DESCRIPTION "Indicates Interface Service State is no longer OOS-MA"
--#TYPE "Warning - Interface Service State OOS-MA Alarm Clear"
--#SUMMARY "Shelf: %s, Slot: %d, %s"
--#SEVERITY WARNING
--#ARGUMENTS {1,2,4}
::= {adGenIfAlarms 1}
adGenIfServiceStateOOSMAActive NOTIFICATION-TYPE
OBJECTS {
adTrapInformSeqNum,
sysName,
adGenSlotInfoIndex,
ifIndex,
ifDescr
}
STATUS obsolete
DESCRIPTION "Indicates Interface Service State is currently OOS-MA"
--#TYPE "Warning - Interface Service State OOS-MA Alarm Active"
--#SUMMARY "Shelf: %s, Slot: %d, %s"
--#SEVERITY WARNING
--#ARGUMENTS {1,2,4}
::= {adGenIfAlarms 2}
END
View Git Blame Copy Permalink