3451 lines
121 KiB
Plaintext
3451 lines
121 KiB
Plaintext
|
|
ADTRAN-GEN-Y1731-MIB
|
|
|
|
--******************************************************************************
|
|
-- TITLE: The ADTRAN GEN Y1731 MIB
|
|
-- PRODUCT: EoCu and EoTDM network termination equipment
|
|
-- DATE: 06/27/11
|
|
-- AUTHOR: Janet Baldazo
|
|
-- STATUS: PRELIMINARY
|
|
--
|
|
-- This MIB defines the object identifier (OID) for the
|
|
-- ADTRAN Y.1731 MIB objects
|
|
--******************************************************************************
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Unsigned32,
|
|
Integer32,
|
|
Counter32,
|
|
OBJECT-TYPE,
|
|
MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DisplayString,
|
|
TimeStamp, RowStatus,
|
|
TruthValue, MacAddress,
|
|
TDomain, TAddress
|
|
FROM SNMPv2-TC
|
|
adTrapInformSeqNum
|
|
FROM ADTRAN-GENTRAPINFORM-MIB
|
|
sysName
|
|
FROM SNMPv2-MIB
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
adGenY1731,
|
|
adGenY1731ID
|
|
FROM ADTRAN-GEN-ETHERNET-OAM-MIB
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB -- [RFC2863]
|
|
LldpChassisId,
|
|
LldpPortId,
|
|
LldpPortIdSubtype
|
|
FROM LLDP-MIB -- [IEEExxx]
|
|
adGenSlotInfoIndex
|
|
FROM ADTRAN-GENSLOT-MIB
|
|
;
|
|
|
|
adGenY1731MIB MODULE-IDENTITY
|
|
LAST-UPDATED "201407210000Z"
|
|
ORGANIZATION "Adtran, Inc."
|
|
CONTACT-INFO
|
|
"CND Tech Support
|
|
Postal: ADTRAN, Inc.
|
|
901 Explorer Blvd.
|
|
Huntsville, AL 35806
|
|
Tel: +1 800 726-8663
|
|
Fax: +1 256 963 6217
|
|
E-mail: support@adtran.com"
|
|
DESCRIPTION
|
|
"This MIB defines the objects for the Y.1731 MIB."
|
|
REVISION "201407210000Z"
|
|
DESCRIPTION "Added cfm to adGenY1731MegNameFormat and comments to adGenY1731MegNameLengthAndName."
|
|
REVISION "201211080000Z"
|
|
DESCRIPTION "Added varbind adGenSlotInfoIndex to the adGenY1731PMFlashFiles set and clear traps."
|
|
REVISION "201206280000Z"
|
|
DESCRIPTION "Added two traps for Y1731 PM Flash Files transfer."
|
|
REVISION "201109260000Z"
|
|
DESCRIPTION "Created"
|
|
|
|
::= { adGenY1731ID 1 }
|
|
|
|
--==============================================================================
|
|
|
|
adGenY1731MIBObjects OBJECT IDENTIFIER ::= { adGenY1731 1 }
|
|
|
|
--==============================================================================
|
|
adGenY1731Config OBJECT IDENTIFIER ::= {adGenY1731MIBObjects 1}
|
|
adGenY1731Meg OBJECT IDENTIFIER ::= {adGenY1731MIBObjects 2}
|
|
adGenY1731LocalMep OBJECT IDENTIFIER ::= {adGenY1731MIBObjects 3}
|
|
adGenY1731Events OBJECT IDENTIFIER ::= {adGenY1731MIBObjects 4}
|
|
|
|
|
|
adGenY1731MegMepList OBJECT IDENTIFIER ::= {adGenY1731Meg 5}
|
|
adGenY1731MegMepListScalars OBJECT IDENTIFIER ::= {adGenY1731MegMepList 1}
|
|
|
|
adGenY1731LocalMepConfig OBJECT IDENTIFIER ::= {adGenY1731LocalMep 1}
|
|
adGenY1731LocalMepConfigScalars OBJECT IDENTIFIER ::= {adGenY1731LocalMepConfig 1}
|
|
|
|
adGenY1731LocalMepRmepDb OBJECT IDENTIFIER ::= {adGenY1731LocalMep 2}
|
|
adGenY1731LocalMepRmepDbScalars OBJECT IDENTIFIER ::= {adGenY1731LocalMepRmepDb 1}
|
|
|
|
adGenY1731LocalMepLbm OBJECT IDENTIFIER ::= {adGenY1731LocalMep 3}
|
|
|
|
adGenY1731LocalMepDmm OBJECT IDENTIFIER ::= {adGenY1731LocalMep 4}
|
|
adGenY1731DmmScalars OBJECT IDENTIFIER ::= {adGenY1731LocalMepDmm 1}
|
|
|
|
adGenY1731LocalMepLmm OBJECT IDENTIFIER ::= {adGenY1731LocalMep 5}
|
|
adGenY1731LmmScalars OBJECT IDENTIFIER ::= {adGenY1731LocalMepLmm 1}
|
|
|
|
adGenY1731LocalMepLtm OBJECT IDENTIFIER ::= {adGenY1731LocalMep 6}
|
|
|
|
adGenY1731LocalMepOneDm OBJECT IDENTIFIER ::= {adGenY1731LocalMep 7}
|
|
adGenY1731OneDmScalars OBJECT IDENTIFIER ::= {adGenY1731LocalMepOneDm 1}
|
|
|
|
adGenY1731LocalMepSlm OBJECT IDENTIFIER ::= {adGenY1731LocalMep 8}
|
|
adGenY1731SlmScalars OBJECT IDENTIFIER ::= {adGenY1731LocalMepSlm 1}
|
|
|
|
adGenY1731LocalMepClm OBJECT IDENTIFIER ::= {adGenY1731LocalMep 9}
|
|
|
|
adGenY1731Traps OBJECT IDENTIFIER ::= { adGenY1731Events 0 }
|
|
--==============================================================================
|
|
--Y.1731 Configuration
|
|
--==============================================================================
|
|
adGenY1731Enable
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is used to enable/disable Y.1731."
|
|
::= { adGenY1731Config 1 }
|
|
|
|
adGenY1731BulkDataExportInterval
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32(30..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval, in seconds, between Y.1731 PM file transfers to the
|
|
management server. The interval must be between 30 and 300 seconds.
|
|
The default interval value is 300 seconds.
|
|
"
|
|
::= { adGenY1731Config 2 }
|
|
|
|
adGenY1731LinktraceCacheHoldTime
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32(1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Linktrace cache hold time specified in minutes. Linktrace replies in the Linktrace Reply Table
|
|
(adGenY1731LocalMepLtrTable) will age out after the configured Linktrace cache hold time.
|
|
The default Linktrace cache hold time value is 1 minute.
|
|
"
|
|
::= { adGenY1731Config 3 }
|
|
|
|
adGenY1731LinktraceCacheSize
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32(1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Linktrace cache size is the maximum entries that can be added stored in the Linktrace
|
|
Reply Table (adGenY1731LocalMepLtrTable). Once the maximum size is reached, the oldest entry
|
|
will be removed when a new one is inserted.
|
|
The default cache size value is 10.
|
|
"
|
|
::= { adGenY1731Config 4 }
|
|
|
|
--==============================================================================
|
|
--Y.1731 Meg Scalars
|
|
--==============================================================================
|
|
|
|
adGenY1731MegMaxNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of allowed Maintenenance Entity Groups."
|
|
::= { adGenY1731Meg 1 }
|
|
|
|
adGenY1731MegCurrentNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of MEGs."
|
|
::= { adGenY1731Meg 2 }
|
|
|
|
adGenY1731MegLastCreateError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last error that occured while attempting to create
|
|
an entry in the Maintenance Entity Group Table (adGenY1731MegTable)."
|
|
::= { adGenY1731Meg 3 }
|
|
|
|
--==============================================================================
|
|
--Y.1731 Meg Table
|
|
--==============================================================================
|
|
adGenY1731MegTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731MegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 MEG table."
|
|
::= { adGenY1731Meg 4 }
|
|
|
|
adGenY1731MegEntry
|
|
OBJECT-TYPE
|
|
SYNTAX AdGenY1731MegEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 MEG table."
|
|
INDEX {
|
|
adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName
|
|
}
|
|
::= { adGenY1731MegTable 1 }
|
|
|
|
AdGenY1731MegEntry ::= SEQUENCE {
|
|
adGenY1731MegLevel Integer32,
|
|
adGenY1731MegNameFormat INTEGER,
|
|
adGenY1731MegNameLengthAndName OCTET STRING,
|
|
adGenY1731MegRowStatus RowStatus,
|
|
adGenY1731MegServiceTypeValueList OCTET STRING,
|
|
adGenY1731MegCcmInterval INTEGER,
|
|
adGenY1731MegLocalMepConfigTableLastCreateError DisplayString,
|
|
adGenY1731MegDisplayName DisplayString
|
|
}
|
|
|
|
adGenY1731MegLevel
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEG level for the MEG."
|
|
::= { adGenY1731MegEntry 1 }
|
|
|
|
adGenY1731MegNameFormat
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
charString(2),
|
|
iccUmc(32),
|
|
cfm(256)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"char-string - This is an IETF RFC 2579 DisplayString, with the
|
|
exception that the character codes 0-31 (decimal) are not used.
|
|
|
|
icc-umc - this consists of two subfields:
|
|
(1) The ITU Carrier Code (ICC) followed by a unique MEG ID code (UMC).
|
|
The ITU Carrier code consists of 1-6 left-justified characters,
|
|
alphabetic, or leading alphabetic with trailing numeric.
|
|
|
|
(2) The UMC code immediately follows the ICC and shall consist of 7-12
|
|
characters. The UMC shall be a matter for the organization to
|
|
which the ICC has been assigned, provided that uniqueness is
|
|
guaranteed.
|
|
cfm - indicates the MEG name will follow the formatting rules defined by
|
|
IEEE 802.1ag Connectivity Fault Management. It will comprise of two names: a Maintenance
|
|
Domain Name and a Maintenance Association Name. Each name will have an associated name
|
|
format.
|
|
"
|
|
::= { adGenY1731MegEntry 2 }
|
|
|
|
adGenY1731MegNameLengthAndName
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2..46))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If adGenY1731MegNameFormat is char-string or icc-umc -
|
|
The First octet represents the total length in octets of the MEG Name.
|
|
Octets 2-46 represent the MEG Name associated with the MEG.
|
|
|
|
If adGenY1731MegNameFormat is CFM - the adGenY1731MegNameLengthAndName field will be
|
|
overridden to contain the IEEE 802.1ag MAID -> MD Name Format + MD Name Length + MD Name
|
|
+ MA Name Format + MA Name Length + MA Name.
|
|
"
|
|
::= { adGenY1731MegEntry 3 }
|
|
|
|
adGenY1731MegRowStatus
|
|
OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is used to create and delete the MEG. The only supported
|
|
settings are createAndGo, createAndWait, and destroy.
|
|
"
|
|
::= { adGenY1731MegEntry 4 }
|
|
|
|
adGenY1731MegServiceTypeValueList
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Octet string which defines the service type and value that maintenance
|
|
points in the MEG reside and operate on.
|
|
|
|
Expected format: First octet represents the overall format and order of
|
|
service types. Subsequent octets represent list of service values.
|
|
|
|
The order of the service values in the list must match the order
|
|
specified by the first octet. The number of octets for an entry in the
|
|
list depends on the type of service. For VLAN tagged services the
|
|
number of required octets is 2 for each tag.
|
|
|
|
Options for the first octet are:
|
|
untagged (1)
|
|
single-tagged s-tag (2)
|
|
single-tagged c-tag (3)
|
|
single-tagged ce-tag (4)
|
|
double-tagged s-tag c-tag (5)
|
|
double-tagged s-tag ce-tag (6)
|
|
triple-tagged s-tag c-tag ce-tag (7)
|
|
|
|
Example of a MP residing on a untagged service:
|
|
octet string = 0x01
|
|
|
|
Example of a MP residing on a double-tagged s-tag ce-tag service with
|
|
an s-tag value of 1000 and ce-tag value of 200
|
|
octet string = 0x06, 0x03, 0xE8, 0x00, 0xC8
|
|
|
|
Example of a MP residing on a single-tagged s-tag service having an
|
|
s-tag value of 1000:
|
|
octet string = 0x02, 0x03, 0xE8
|
|
"
|
|
::= { adGenY1731MegEntry 5 }
|
|
|
|
adGenY1731MegCcmInterval
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
interval300Hz(1),
|
|
interval10ms(2),
|
|
interval100ms(3),
|
|
interval1s(4),
|
|
interval10s(5),
|
|
interval1min(6),
|
|
interval10min(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between CCM transmissions to be used by all MEPs in the MEG.
|
|
Default value is 1-second.
|
|
"
|
|
::= { adGenY1731MegEntry 6 }
|
|
|
|
adGenY1731MegLocalMepConfigTableLastCreateError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last error that occured while attempting to create
|
|
an entry in the MEG's local MEP Config Table
|
|
(adGenY1731LocalMepConfigTable).
|
|
"
|
|
::= { adGenY1731MegEntry 7 }
|
|
|
|
adGenY1731MegDisplayName
|
|
OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the MEG Name associated with the MEG."
|
|
::= { adGenY1731MegEntry 8 }
|
|
|
|
|
|
--=============================================================================
|
|
--Y.1731 MEG MEP List Scalars
|
|
--=============================================================================
|
|
|
|
adGenY1731MegMepListMaxNumber
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of allowed Maintenenance End Points that the device
|
|
supports. The number is the sum of all entries present in the local
|
|
MEP table and the local MEP RMEP database table.
|
|
"
|
|
::= { adGenY1731MegMepListScalars 1 }
|
|
|
|
adGenY1731MegMepListCurrentNumber
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of MEPs in the MEG's list of MEPs."
|
|
::= { adGenY1731MegMepListScalars 2 }
|
|
|
|
adGenY1731MegMepListTableLastCreateError
|
|
OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last error that occured while attempting to create
|
|
an entry in the MEG MEP List (adGenY1731MegMepListTable).
|
|
"
|
|
::= { adGenY1731MegMepListScalars 3 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 MEG MEP List Table
|
|
--=============================================================================
|
|
adGenY1731MegMepListTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731MegMepListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of all MEPs in the MEG. For a device to create a local MEP it
|
|
will need to create an entry in the adGenY1731LocalMepConfigTable.
|
|
|
|
Once a local MEP is created, all other entries in the
|
|
adGenY1731MegMepListTable are automatically considered remote MEPs of
|
|
the local MEP and their information is used to populate
|
|
the adGenY1731LocalMepRmepDbTable.
|
|
|
|
The MEG MEP List should be the same across all devices in the MEG
|
|
and contain the exact same list of adGenY1731MegMepListIdentifiers.
|
|
|
|
On a given device, a MEPID in the MEG MEP list can transition from
|
|
having no association to a local or remote MEP to any of the following
|
|
(1) becoming a local MEP, (2) becoming a remote MEP of a local MEP, or
|
|
(3) becoming both a local MEP and a remote MEP of a local MEP. The
|
|
third case is possible if two local MEPs in the same MEG are created
|
|
on the same device.
|
|
"
|
|
::= { adGenY1731MegMepList 2 }
|
|
|
|
adGenY1731MegMepListEntry
|
|
OBJECT-TYPE
|
|
SYNTAX AdGenY1731MegMepListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 MEG MEP list table."
|
|
INDEX {adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731MegMepListIdentifier}
|
|
::= { adGenY1731MegMepListTable 1 }
|
|
|
|
AdGenY1731MegMepListEntry ::= SEQUENCE {
|
|
adGenY1731MegMepListIdentifier Integer32,
|
|
adGenY1731MegMepListRowStatus RowStatus
|
|
}
|
|
|
|
adGenY1731MegMepListIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer that is unique among all the MEPs in the same MEG. Other
|
|
definition is: a small integer, unique over a given Maintenance Entity
|
|
Group, identifying a specific MEG End Point.
|
|
|
|
MEP Identifier is also known as the MEPID.
|
|
"
|
|
::= { adGenY1731MegMepListEntry 1 }
|
|
|
|
adGenY1731MegMepListRowStatus
|
|
OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is used to create/delete the MEG MEP list entry. The only
|
|
supported settings are createAndGo, createAndWait, and destroy.
|
|
"
|
|
::= { adGenY1731MegMepListEntry 2 }
|
|
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP Scalars
|
|
--=============================================================================
|
|
|
|
adGenY1731LocalMepMaxNumber
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of allowed local Maintenenance End Points."
|
|
::= { adGenY1731LocalMepConfigScalars 1 }
|
|
|
|
adGenY1731LocalMepCurrentNumber
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of local MEPs."
|
|
::= { adGenY1731LocalMepConfigScalars 2 }
|
|
|
|
adGenY1731LocalMepConfigTableLastCreateError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last error that occured while attempting to create
|
|
an entry in the local MEP Table (adGenY1731LocalMepConfigTable).
|
|
"
|
|
::= { adGenY1731LocalMepConfigScalars 3 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP Config Table
|
|
--=============================================================================
|
|
|
|
adGenY1731LocalMepConfigTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 local MEP table. A local MEP is one that resides on an
|
|
interface of the system.
|
|
"
|
|
::= { adGenY1731LocalMepConfig 2 }
|
|
|
|
adGenY1731LocalMepConfigEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 local MEP table."
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier }
|
|
::= { adGenY1731LocalMepConfigTable 1 }
|
|
|
|
AdGenY1731LocalMepConfigEntry ::= SEQUENCE {
|
|
adGenY1731LocalMepIdentifier Integer32,
|
|
adGenY1731LocalMepRowStatus RowStatus,
|
|
adGenY1731LocalMepStatus INTEGER,
|
|
adGenY1731LocalMepStatusString OCTET STRING,
|
|
adGenY1731LocalMepIfIndex InterfaceIndexOrZero,
|
|
adGenY1731LocalMepDirection INTEGER,
|
|
adGenY1731LocalMepAdminState INTEGER,
|
|
adGenY1731LocalMepVlanPriority Integer32,
|
|
adGenY1731LocalMepCcmEnabled INTEGER
|
|
}
|
|
|
|
adGenY1731LocalMepIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer that is unique among all the MEPs in the same MEG. Other
|
|
definition is: a small integer, unique over a given Maintenance Entity
|
|
Group, identifying a specific MEG End Point.
|
|
|
|
MEP Identifier is also known as the MEPID.
|
|
"
|
|
::= { adGenY1731LocalMepConfigEntry 1 }
|
|
|
|
adGenY1731LocalMepRowStatus
|
|
OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is used to create/delete the MEP. The only supported settings
|
|
are createAndGo, createAndWait, and destroy.
|
|
"
|
|
::= { adGenY1731LocalMepConfigEntry 2 }
|
|
|
|
adGenY1731LocalMepStatus
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(1),
|
|
notRunning(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status of the MEP. The minimum attributes that need to be
|
|
set before a MEP can transition to running are: ifIndex, direction,
|
|
and admin state.
|
|
"
|
|
::= { adGenY1731LocalMepConfigEntry 3 }
|
|
|
|
adGenY1731LocalMepStatusString
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status string of the MEP. If the MEP is expected to be
|
|
active but is not able to be due to a provisioning issue or conflict,
|
|
this string will explain the reason.
|
|
"
|
|
::= { adGenY1731LocalMepConfigEntry 4 }
|
|
|
|
adGenY1731LocalMepIfIndex
|
|
OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the interface index of the interface either a bridge
|
|
port, or an aggregated IEEE 802.1 link within a bridge port, to which
|
|
the MEP is attached. A value of 0 indicates no IfIndex
|
|
has been assigned.
|
|
"
|
|
::= { adGenY1731LocalMepConfigEntry 5 }
|
|
|
|
adGenY1731LocalMepDirection
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSet(0),
|
|
down(1),
|
|
up(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction in which the MEP faces on the Bridge port."
|
|
::= { adGenY1731LocalMepConfigEntry 6 }
|
|
|
|
adGenY1731LocalMepAdminState
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the MEP.
|
|
|
|
Enable indicates that the MEP is to function normally, and disable that
|
|
it is to cease functioning.
|
|
"
|
|
::= { adGenY1731LocalMepConfigEntry 7 }
|
|
|
|
adGenY1731LocalMepVlanPriority
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value for messages transmitted by the MEP. Default value
|
|
is the highest priority value for the service which is assumed to be 7.
|
|
The management entity can obtain the default value for this variable
|
|
from the priority regeneration table by extracting the highest priority
|
|
value in this table on this MEPs bridge port.
|
|
"
|
|
::= { adGenY1731LocalMepConfigEntry 8 }
|
|
|
|
adGenY1731LocalMepCcmEnabled
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true, the MEP will generate CCM messages."
|
|
::= { adGenY1731LocalMepConfigEntry 9 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP RMEP Database Scalars
|
|
--=============================================================================
|
|
|
|
adGenY1731LocalMepRmepDbMaxNumber
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A systemwide value representing the maximum number of remote
|
|
Maintenance End Points that can be created across all Local
|
|
MEPs on the device.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbScalars 1 }
|
|
|
|
adGenY1731LocalMepRmepDbCurrentNumber
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of remote MEPs."
|
|
::= { adGenY1731LocalMepRmepDbScalars 2 }
|
|
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP RMEP Database Table
|
|
--=============================================================================
|
|
|
|
adGenY1731LocalMepRmepDbTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepRmepDbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RMEP database table for a given local MEP. Maintains information
|
|
and status for each RMEP of a local MEP.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDb 2 }
|
|
|
|
adGenY1731LocalMepRmepDbEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepRmepDbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the a local MEP's RMEP database table. An RMEP
|
|
associated with a specific local MEP
|
|
"
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier,
|
|
adGenY1731RemoteMepIdentifier
|
|
}
|
|
::= { adGenY1731LocalMepRmepDbTable 1 }
|
|
|
|
AdGenY1731LocalMepRmepDbEntry ::= SEQUENCE {
|
|
adGenY1731RemoteMepIdentifier Integer32,
|
|
adGenY1731RemoteMepStatus INTEGER,
|
|
adGenY1731RemoteMepFailedOkTime TimeStamp,
|
|
adGenY1731RemoteMepMacAddress MacAddress,
|
|
adGenY1731RemoteMepLastCcmSequenceNumber Unsigned32,
|
|
adGenY1731RemoteMepRdi TruthValue,
|
|
adGenY1731RemoteMepPortStatus INTEGER,
|
|
adGenY1731RemoteMepInterfaceStatus INTEGER,
|
|
adGenY1731RemoteMepChassisIdSubtype INTEGER,
|
|
adGenY1731RemoteMepChassisId LldpChassisId,
|
|
adGenY1731RemoteMepManAddressDomain TDomain,
|
|
adGenY1731RemoteMepManAddress TAddress
|
|
}
|
|
|
|
adGenY1731RemoteMepIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer that is unique among all the MEPs in the same MEG. Other
|
|
definition is: a small integer, unique over a given Maintenance Entity
|
|
Group, identifying a specific MEG End Point.
|
|
|
|
MEP Identifier is also known as the MEPID.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 1 }
|
|
|
|
adGenY1731RemoteMepStatus
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(0),
|
|
okay(1),
|
|
failed(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the RMEP.
|
|
Status of idle indicates the local MEP associated with this RMEP entry
|
|
is not in the active state.
|
|
|
|
Status of okay indicates the local MEP is actively receiving CCMs from
|
|
the RMEP at the expected CCI.
|
|
|
|
Status of failed indicates the local MEP has not received a CCM from
|
|
the RMEP within 3.5 times the CCI.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 2 }
|
|
|
|
adGenY1731RemoteMepFailedOkTime
|
|
OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (SysUpTime) at which the RMEP state machine last entered
|
|
either the idle, okay, or failed state. The value is the time since
|
|
the device started up and is represented using TimeStamp syntax.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 3 }
|
|
|
|
adGenY1731RemoteMepMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the remote MEP."
|
|
::= { adGenY1731LocalMepRmepDbEntry 4 }
|
|
|
|
adGenY1731RemoteMepLastCcmSequenceNumber
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sequence number in last CCM received from the remote MEP."
|
|
::= { adGenY1731LocalMepRmepDbEntry 5 }
|
|
|
|
adGenY1731RemoteMepRdi
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the RDI bit in the last received CCM (true for RDI=1), or
|
|
false if none has been received.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 6 }
|
|
|
|
adGenY1731RemoteMepPortStatus
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
psNoPortStatusTlv(0),
|
|
psBlocked(1),
|
|
psUp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value of the Port Status TLV received in the last CCM
|
|
from the remote MEP.
|
|
|
|
The default value psNoPortStatusTlv is returned if no CCM has been
|
|
received or if no Port Status TLV was received in the last CCM.
|
|
|
|
psBlocked - Ordinary data cannot pass freely through the port on
|
|
which the remote MEP resides.
|
|
|
|
psUp - Ordinary data can pass freely through the port on which the
|
|
remote MEP resides.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 7 }
|
|
|
|
adGenY1731RemoteMepInterfaceStatus
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
isNoInterfaceStatusTLV(0),
|
|
isUp(1),
|
|
isDown(2),
|
|
isTesting(3),
|
|
isUnknown(4),
|
|
isDormant(5),
|
|
isNotPresent(6),
|
|
isLowerLayerDown(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value of the Interface status TLV received in the last
|
|
CCM from the remote MEP.
|
|
|
|
The the default value isNoInterfaceStatus TLV is returned if either no
|
|
CCM has been received or if no interface status TLV was received in the
|
|
last CCM.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 8 }
|
|
|
|
adGenY1731RemoteMepChassisIdSubtype
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nonePresent(0),
|
|
chassisComponent(1),
|
|
interfaceAlias(2),
|
|
portComponent(3),
|
|
macAddress(4),
|
|
networkAddress(5),
|
|
interfaceName(6),
|
|
local(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the format of the Chassis ID received in the last CCM.
|
|
If the Chassis ID field was not included in the Sender ID TLV
|
|
received, the value nonePresent(0) will be returned.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 9 }
|
|
|
|
adGenY1731RemoteMepChassisId
|
|
OBJECT-TYPE
|
|
SYNTAX LldpChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Chassis ID received in the last CCM format of which is determined by
|
|
the value of adGenY1731RemoteMepChassisIdSubtype.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 10 }
|
|
|
|
adGenY1731RemoteMepManAddressDomain
|
|
OBJECT-TYPE
|
|
SYNTAX TDomain
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TDomain that identifies the type and format of
|
|
the related adGenY1731RemoteMepManAddress object, used to access
|
|
the SNMP agent of the system transmitting the CCM. The value is
|
|
derived from the Sender ID TLV in the last CCM received.
|
|
|
|
Typical values will be one of (not all inclusive) list:
|
|
|
|
|
|
snmpUDPDomain (from SNMPv2-TM, RFC3417)
|
|
snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789)
|
|
|
|
The value 'zeroDotZero' (from RFC2578) indicates 'no management
|
|
address was present in the LTR', in which case the related
|
|
object adGenY1731RemoteMepManAddress must have a zero-length OCTET
|
|
STRING as a value.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 11 }
|
|
|
|
adGenY1731RemoteMepManAddress
|
|
OBJECT-TYPE
|
|
SYNTAX TAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TAddress that can be used to access the SNMP agent of the system
|
|
transmitting the CCM. This is received in the CCM Sender ID TLV from
|
|
that system.
|
|
|
|
If the related object adGenY1731RemoteMepManAddressDomain contains
|
|
the value 'zeroDotZero', this object adGenY1731RemoteMepManAddress
|
|
must have a zero-length OCTET STRING as a value.
|
|
"
|
|
::= { adGenY1731LocalMepRmepDbEntry 12 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP Loopback Message(LBM)
|
|
--=============================================================================
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP LBM Transmit Table
|
|
--=============================================================================
|
|
|
|
adGenY1731LocalMepLbmTransmitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepLbmTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 Local MEP Loopback Transmit table. A Local MEP is one that
|
|
resides on an interface of the system. This table will enable the user
|
|
to configure a Local MEP in preparation for starting a Loopback
|
|
session.
|
|
"
|
|
::= { adGenY1731LocalMepLbm 1 }
|
|
|
|
adGenY1731LocalMepLbmTransmitEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepLbmTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 Local MEP Loopback Transmit table."
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier }
|
|
::= { adGenY1731LocalMepLbmTransmitTable 1 }
|
|
|
|
AdGenY1731LocalMepLbmTransmitEntry ::= SEQUENCE {
|
|
adGenY1731LocalMepLbmStatus TruthValue,
|
|
adGenY1731LocalMepLbmConfigStatus TruthValue,
|
|
adGenY1731LocalMepLbmDestMacAddress MacAddress,
|
|
adGenY1731LocalMepLbmDestMepId Integer32,
|
|
adGenY1731LocalMepLbmDestIsMepId TruthValue,
|
|
adGenY1731LocalMepLbmMessageCount Integer32,
|
|
adGenY1731LocalMepLbmActive TruthValue,
|
|
adGenY1731LocalMepLbmDataTlv OCTET STRING,
|
|
adGenY1731LocalMepLbmVlanPriority Integer32,
|
|
adGenY1731LocalMepLbmVlanDropEnable TruthValue,
|
|
adGenY1731LocalMepLbmErrorStatus DisplayString,
|
|
adGenY1731LocalMepLbmTimeout Unsigned32,
|
|
adGenY1731LocalMepLbmInterframeDelay Unsigned32,
|
|
adGenY1731LocalMepLbmNextTransId Unsigned32,
|
|
adGenY1731LocalMepLbmSize Integer32,
|
|
adGenY1731LocalMepValidateData TruthValue
|
|
}
|
|
|
|
adGenY1731LocalMepLbmStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag where true means the MEP is actively sending LBM messages
|
|
and false means that no LBMs are being transmitted.
|
|
"
|
|
DEFVAL { false }
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 1 }
|
|
|
|
adGenY1731LocalMepLbmConfigStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True means the MEP is ready for configuring LBM and a false means the MEP
|
|
is under LBM configuration. This flag is used to prevent simultaneous
|
|
configuration by more than one user. If one minute has passed since the
|
|
last LocalMepLbm attribute was set, then it is assume the user has abandoned
|
|
configuring the session and the adGenY1731LocalMepLbmConfigStatus will be
|
|
reset to true.
|
|
"
|
|
DEFVAL { true }
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 2 }
|
|
|
|
adGenY1731LocalMepLbmDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted. This is a unicast
|
|
destination MAC address.
|
|
|
|
This address will be used if the value of the column
|
|
adGenY1731LocalMepTransmitLbmDestMepId is 'false'.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 3 }
|
|
|
|
adGenY1731LocalMepLbmDestMepId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEG End Point Identifier of another MEP in the same MEG to which
|
|
the LBM is to be sent. This address will be used if the value of the
|
|
column adGenY1731LocalMepTransmitLbmDestIsMepId is 'true'.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 4 }
|
|
|
|
adGenY1731LocalMepLbmDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for Loopback
|
|
transmission. False indicates that unicast destination MAC address of
|
|
the target MEP is used for Loopback transmission.
|
|
"
|
|
::= {adGenY1731LocalMepLbmTransmitEntry 5 }
|
|
|
|
adGenY1731LocalMepLbmMessageCount OBJECT-TYPE
|
|
SYNTAX Integer32(1..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Loopback messages to be transmitted."
|
|
DEFVAL { 1 }
|
|
::= {adGenY1731LocalMepLbmTransmitEntry 6 }
|
|
|
|
adGenY1731LocalMepLbmActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start or stop LBM transmission. By writing true, start LBM transmisson.
|
|
By writing false, stop LBM transmission
|
|
"
|
|
DEFVAL { false }
|
|
::= {adGenY1731LocalMepLbmTransmitEntry 7 }
|
|
|
|
adGenY1731LocalMepLbmDataTlv OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1500))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary amount of data to be included in the Data TLV, if the Data
|
|
TLV is selected to be sent.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 8 }
|
|
|
|
adGenY1731LocalMepLbmVlanPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 3 bit priority value to be used in the VLAN tag, if present, in the
|
|
transmitted frame.
|
|
|
|
The default value is CCM priority.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 9 }
|
|
|
|
adGenY1731LocalMepLbmVlanDropEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Drop Enable bit value to be used in the VLAN tag, if present
|
|
in the transmitted frame.
|
|
|
|
For more information about VLAN Drop Enable, please check
|
|
IEEE 802.1ad.
|
|
"
|
|
DEFVAL { true }
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 10 }
|
|
|
|
adGenY1731LocalMepLbmErrorStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEP Loopback error status.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 11 }
|
|
|
|
adGenY1731LocalMepLbmTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (100..5000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEP Loopback Timeout in milliseconds.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 12 }
|
|
|
|
adGenY1731LocalMepLbmInterframeDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32 (100..10000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MEP Loopback Interframe Delay in milliseconds.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 13 }
|
|
|
|
adGenY1731LocalMepLbmNextTransId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Next transaction identifier to be sent in a Loopback message. This
|
|
transaction identifier can be zero because it wraps around.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 14 }
|
|
|
|
adGenY1731LocalMepLbmSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of the LBM in bytes. The size encompasses the entire Ethernet
|
|
frame from the header through the FCS.
|
|
|
|
The supported values are:
|
|
0 to indicate Data TLV should not be included in LBM sent.
|
|
64 to 2000 bytes to indicate the Data TLV should be included to increase
|
|
the frame length to the specified size.
|
|
|
|
If the Data TLV is not included, the LBM will be sent with the minimum
|
|
Ethernet frame size of 64-bytes but it will not contain the Data TLV. A
|
|
zero-pad will be used to fulfill the minimum length requirement.
|
|
|
|
The default value is 0.
|
|
"
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 15 }
|
|
|
|
adGenY1731LocalMepValidateData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag where true means the data sent in LBM message has to be
|
|
validated with the LBR. False indicates no validation is required.
|
|
"
|
|
DEFVAL { false }
|
|
::= { adGenY1731LocalMepLbmTransmitEntry 16 }
|
|
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP LBM Result Table
|
|
--=============================================================================
|
|
adGenY1731LocalMepLbmResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepLbmResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 Local MEP Loopback Result table. A Local MEP is one that resides on an
|
|
interface of the system. This table can be used to query the results and counters
|
|
related to LBM
|
|
"
|
|
::= { adGenY1731LocalMepLbm 2 }
|
|
|
|
adGenY1731LocalMepLbmResultEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepLbmResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 Local MEP Loopback Result table."
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier }
|
|
::= { adGenY1731LocalMepLbmResultTable 1 }
|
|
|
|
AdGenY1731LocalMepLbmResultEntry ::= SEQUENCE {
|
|
adGenY1731LocalMepLbrResultOk TruthValue,
|
|
adGenY1731LocalMepLbrResponseTimeMin Unsigned32,
|
|
adGenY1731LocalMepLbrResponseTimeMax Unsigned32,
|
|
adGenY1731LocalMepLbrResponseTimeAvg Unsigned32,
|
|
adGenY1731LocalMepLbrIn Counter32,
|
|
adGenY1731LocalMepLbrInOutOfOrder Counter32,
|
|
adGenY1731LocalMepLbrBadMsdu Counter32,
|
|
adGenY1731LocalMepLbmOut Counter32
|
|
}
|
|
|
|
adGenY1731LocalMepLbrResultOk OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
- true The Loopback Message(s) will be
|
|
(or has been) sent.
|
|
- false The Loopback Message(s) will not
|
|
be sent.
|
|
"
|
|
DEFVAL { true }
|
|
::= { adGenY1731LocalMepLbmResultEntry 1 }
|
|
|
|
adGenY1731LocalMepLbrResponseTimeMin OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum LBR round-trip time (in milliseconds).
|
|
"
|
|
::= { adGenY1731LocalMepLbmResultEntry 2 }
|
|
|
|
adGenY1731LocalMepLbrResponseTimeMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum LBR round-trip time (in milliseconds).
|
|
"
|
|
::= { adGenY1731LocalMepLbmResultEntry 3 }
|
|
|
|
adGenY1731LocalMepLbrResponseTimeAvg OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average LBR round-trip time (in milliseconds).
|
|
"
|
|
::= { adGenY1731LocalMepLbmResultEntry 4 }
|
|
|
|
adGenY1731LocalMepLbrIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of valid, Loopback Replies received."
|
|
::= { adGenY1731LocalMepLbmResultEntry 5 }
|
|
|
|
adGenY1731LocalMepLbrInOutOfOrder OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of valid, out-of-order Loopback Replies
|
|
received.
|
|
"
|
|
::= { adGenY1731LocalMepLbmResultEntry 6 }
|
|
|
|
adGenY1731LocalMepLbrBadMsdu OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LBRs received whose
|
|
mac_service_data_unit did not match (except for the OpCode)
|
|
that of the corresponding LBM.
|
|
"
|
|
::= { adGenY1731LocalMepLbmResultEntry 7}
|
|
|
|
adGenY1731LocalMepLbmOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LBMs transmitted.
|
|
"
|
|
::= { adGenY1731LocalMepLbmResultEntry 8}
|
|
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP LBM Responder Table
|
|
--=============================================================================
|
|
adGenY1731LocalMepLbmResponderTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepLbmResponderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 Local MEP Loopback Responder table. A Local MEP is one that resides on an
|
|
interface of the system. This table can be used to query the counters
|
|
related to LBR
|
|
"
|
|
::= { adGenY1731LocalMepLbm 3 }
|
|
|
|
adGenY1731LocalMepLbmResponderEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepLbmResponderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 Local MEP Loopback Responder table."
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier }
|
|
::= { adGenY1731LocalMepLbmResponderTable 1 }
|
|
|
|
AdGenY1731LocalMepLbmResponderEntry ::= SEQUENCE {
|
|
adgenY1731LocalMepLbrOut Counter32,
|
|
adGenY1731LocalMepLbmIn Counter32
|
|
}
|
|
|
|
adgenY1731LocalMepLbrOut OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Loopback Replies transmitted."
|
|
::= { adGenY1731LocalMepLbmResponderEntry 1 }
|
|
|
|
adGenY1731LocalMepLbmIn OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of valid, Loopback Messages received."
|
|
::= { adGenY1731LocalMepLbmResponderEntry 2 }
|
|
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-DMM Scalars
|
|
--=============================================================================
|
|
|
|
adGenY1731DmmSessionMaxNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A systemwide value representing the maximum number of DMM sessions
|
|
that can be created across all local MEPs on the device.
|
|
"
|
|
::= { adGenY1731DmmScalars 1 }
|
|
|
|
adGenY1731DmmSessionCurrentNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of DMM sessions created."
|
|
::= { adGenY1731DmmScalars 2 }
|
|
|
|
adGenY1731DmmSessionLastCreateError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last error that occurred while attempting to create
|
|
an DMM Session Transmit entry (adGenY1731DmmSessionTransmitEntry).
|
|
"
|
|
::= { adGenY1731DmmScalars 3 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-DMM Transmit Table
|
|
--=============================================================================
|
|
adGenY1731DmmSessionTransmitTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731DmmSessionTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The two-way frame-delay (DMM) session table for a given local MEP.
|
|
A local MEP's DMM sessions can be created, edited, and deleted using
|
|
this table. A local MEP can target a remote MEP to run two-way frame
|
|
delay measurements between the two MEPs in the MEG.
|
|
|
|
The target can be specified by either using a MAC address of the target
|
|
MEP or the MEPID of the target MEP. For the DMM session to go active,
|
|
the local MEP must be successfully receiving CCMs from the remote MEP
|
|
in order to specify the RMEPID as the target.
|
|
"
|
|
::= { adGenY1731LocalMepDmm 2 }
|
|
|
|
adGenY1731DmmSessionTransmitEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731DmmSessionTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A two-way frame-delay (DMM) performance monitoring session of a
|
|
local MEP. A DMM PM session is unique based on target identifier
|
|
and VLAN priority. The target identifier is either a MAC address
|
|
or RMEPID. Inclusion of VLAN priority in the index allows a local MEP
|
|
to simultaneously run several DMM PM sessions between it and the target
|
|
at various CoS levels.
|
|
"
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier,
|
|
adGenY1731DmmSessionTargetRmepIdOrMacAddress,
|
|
adGenY1731DmmSessionTarget,
|
|
adGenY1731DmmSessionVlanPriority
|
|
}
|
|
::= { adGenY1731DmmSessionTransmitTable 1 }
|
|
|
|
AdGenY1731DmmSessionTransmitEntry ::= SEQUENCE {
|
|
adGenY1731DmmSessionTargetRmepIdOrMacAddress INTEGER,
|
|
adGenY1731DmmSessionTarget OCTET STRING,
|
|
adGenY1731DmmSessionVlanPriority Integer32,
|
|
adGenY1731DmmSessionTargetRemoteMepIdentifier Integer32,
|
|
adGenY1731DmmSessionTargetMacAddress MacAddress,
|
|
adGenY1731DmmSessionRowStatus RowStatus,
|
|
adGenY1731DmmSessionAdminState TruthValue,
|
|
adGenY1731DmmSessionStatus INTEGER,
|
|
adGenY1731DmmSessionStatusString DisplayString,
|
|
adGenY1731DmmSessionInterframeDelay Integer32,
|
|
adGenY1731DmmSessionMeasurementInterval Integer32,
|
|
adGenY1731DmmSessionSize Integer32,
|
|
adGenY1731DmmSessionData OCTET STRING,
|
|
adGenY1731DmmSessionBulkDataExportFileTypes INTEGER
|
|
}
|
|
|
|
adGenY1731DmmSessionTargetRmepIdOrMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rmepId(1),
|
|
macAddress(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the target specified is a MEPID or a unicast MAC
|
|
Address. If the target specified is a MEPID, the local MEP will not be
|
|
able to initiate the DMM session until a CCM has been received from the
|
|
RMEP
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 1 }
|
|
|
|
adGenY1731DmmSessionTarget
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Octet string defining the target for the DMM session.
|
|
If adGenY1731DmmSessionTargetRmepIdOrMacAddress indicates the target is
|
|
a MEPID then the octet string should represent a MEPID between the
|
|
range 1-8191. Otherwise, it should be the target's unicast MAC address
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 2 }
|
|
|
|
adGenY1731DmmSessionVlanPriority
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Priority that will be used in all DMM frames sent by this
|
|
DMM transmit session.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 3 }
|
|
|
|
adGenY1731DmmSessionTargetRemoteMepIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target MEPID for this DMM session"
|
|
::= { adGenY1731DmmSessionTransmitEntry 4 }
|
|
|
|
adGenY1731DmmSessionTargetMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target MAC address for this DMM session"
|
|
::= { adGenY1731DmmSessionTransmitEntry 5 }
|
|
|
|
adGenY1731DmmSessionRowStatus
|
|
OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is used to create/delete a transmit DMM session of a Local
|
|
MEP. The only supported settings are createAndGo, createAndWait, and
|
|
destroy.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 6 }
|
|
|
|
adGenY1731DmmSessionAdminState
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the DMM transmit session.
|
|
|
|
True indicates that the DMM session is to function normally and
|
|
actively transmit DMMs towards the specified target, and false that
|
|
it is to cease functioning.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 7 }
|
|
|
|
adGenY1731DmmSessionStatus
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(1),
|
|
notRunning(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status of the DMM transmit session. The minimum
|
|
attributes that need to be set before a MEP can transmit DMMs towards
|
|
the target are: Target MEPID or MAC Address and admin state. If a
|
|
MEPID is used to specify the target then the local MEP must have
|
|
received a CCM from the remote MEP in-order to learn its MAC address.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 8 }
|
|
|
|
adGenY1731DmmSessionStatusString
|
|
OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status string of the DMM transmit session. If the session
|
|
is expected to be active but is not able to be due to a provisioning
|
|
issue or conflict, this string will explain the reason.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 9 }
|
|
|
|
adGenY1731DmmSessionInterframeDelay
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Amount of time in milliseconds between DMM transmissions. The
|
|
supported range is 100 - 10,000 ms and the default value is 1000 ms.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 10 }
|
|
|
|
adGenY1731DmmSessionMeasurementInterval
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (60..900)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in seconds over which statistics are generated. The supported
|
|
range is 60 - 900 seconds and the default value is 60. The statistics
|
|
calculated for a measurement interval are stored in the averaged data
|
|
file. The data for the current and previous intervals is available via
|
|
the adGenY1731DmmSessionResultTable.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 11 }
|
|
|
|
adGenY1731DmmSessionSize
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of the DMM in bytes. The size encompasses the entire Ethernet
|
|
frame from the header through the FCS.
|
|
|
|
The supported values are:
|
|
0 to indicate Data TLV should not be included in DMM sent.
|
|
64 to 2000 bytes to indicate the DataTLV should be included to increase
|
|
the frame length to the specified size.
|
|
|
|
If the Data TLV is not included, the DMM will be sent with the minimum
|
|
Ethernet frame size of 64-bytes but it will not contain the DataTLV. A
|
|
zero-pad will be used to fulfill the minimum length requirement.
|
|
|
|
The default value is 0.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 12 }
|
|
|
|
adGenY1731DmmSessionData
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data pattern to be used when padding is required to meet the size
|
|
setting. The default value is 0x00 0x00.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 13 }
|
|
|
|
adGenY1731DmmSessionBulkDataExportFileTypes
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
average(2),
|
|
raw(3),
|
|
averageAndRaw(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines which, if any, files are generated by this DMM transmit
|
|
session. The files are used to store two-way frame-delay statistics.
|
|
The average setting will enable storage of statistics generated by
|
|
each measurement interval. The raw setting will enable storage
|
|
for each two-way frame-delay sample. The averageAndRaw setting
|
|
will result in both files being generated.
|
|
"
|
|
::= { adGenY1731DmmSessionTransmitEntry 14 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-LMM Scalars
|
|
--=============================================================================
|
|
|
|
adGenY1731LmmSessionMaxNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A systemwide value representing the maximum number of LMM sessions
|
|
that can be created across all local MEPs on the device.
|
|
"
|
|
::= { adGenY1731LmmScalars 1 }
|
|
|
|
adGenY1731LmmSessionCurrentNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of LMM sessions created."
|
|
::= { adGenY1731LmmScalars 2 }
|
|
|
|
adGenY1731LmmSessionLastCreateError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last error that occurred while attempting to create
|
|
an LMM Session Transmit entry (adGenY1731LmmSessionTransmitEntry).
|
|
"
|
|
::= { adGenY1731LmmScalars 3 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-LMM Transmit Table
|
|
--=============================================================================
|
|
adGenY1731LmmSessionTransmitTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LmmSessionTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The single-ended frame-loss (LMM) session table for a given local MEP.
|
|
A local MEP's LMM sessions can be created, edited, and deleted using
|
|
this table. A local MEP can target a remote MEP to run single-ended
|
|
frame-loss measurements between the two MEPs in the MEG.
|
|
|
|
The target can be specified by either using a MAC address of the target
|
|
MEP or the MEPID of the target MEP. For the LMM session to go active,
|
|
the local MEP must be successfully receiving CCMs from the remote MEP
|
|
in order to specify the RMEPID as the target.
|
|
"
|
|
::= { adGenY1731LocalMepLmm 2 }
|
|
|
|
adGenY1731LmmSessionTransmitEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LmmSessionTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single-ended frame-loss (LMM) performance monitoring session of a
|
|
local MEP. A LMM PM session is unique based on target identifier
|
|
and VLAN priority. The target identifier is either a MAC address
|
|
or RMEPID. Inclusion of VLAN priority in the index allows a local MEP
|
|
to simultaneously run several LMM PM sessions between it and the target
|
|
at various CoS levels.
|
|
"
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier,
|
|
adGenY1731LmmSessionTargetRmepIdOrMacAddress,
|
|
adGenY1731LmmSessionTarget,
|
|
adGenY1731LmmSessionVlanPriority
|
|
}
|
|
::= { adGenY1731LmmSessionTransmitTable 1 }
|
|
|
|
AdGenY1731LmmSessionTransmitEntry ::= SEQUENCE {
|
|
adGenY1731LmmSessionTargetRmepIdOrMacAddress INTEGER,
|
|
adGenY1731LmmSessionTarget OCTET STRING,
|
|
adGenY1731LmmSessionVlanPriority Integer32,
|
|
adGenY1731LmmSessionTargetRemoteMepIdentifier Integer32,
|
|
adGenY1731LmmSessionTargetMacAddress MacAddress,
|
|
adGenY1731LmmSessionRowStatus RowStatus,
|
|
adGenY1731LmmSessionAdminState TruthValue,
|
|
adGenY1731LmmSessionStatus INTEGER,
|
|
adGenY1731LmmSessionStatusString DisplayString,
|
|
adGenY1731LmmSessionInterframeDelay Integer32,
|
|
adGenY1731LmmSessionMeasurementInterval Integer32,
|
|
adGenY1731LmmSessionSize Integer32,
|
|
adGenY1731LmmSessionData OCTET STRING,
|
|
adGenY1731LmmSessionBulkDataExportFileTypes INTEGER
|
|
}
|
|
|
|
adGenY1731LmmSessionTargetRmepIdOrMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rmepId(1),
|
|
macAddress(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the target specified is a MEPID or a unicast MAC
|
|
Address. If the target specified is a MEPID the local MEP will not be
|
|
able to initiate the LMM session until a CCM has been received from the
|
|
RMEP
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 1 }
|
|
|
|
adGenY1731LmmSessionTarget
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Octet string defining the target for the LMM session.
|
|
If adGenY1731LmmSessionTargetRmepIdOrMacAddress indicates the target is
|
|
a MEPID then the octet string should represent a MEPID between the
|
|
range 1-8191. Otherwise, it should be the target's unicast MAC address
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 2 }
|
|
|
|
adGenY1731LmmSessionVlanPriority
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Priority that will be used in all LMM frames sent by this
|
|
LMM transmit session.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 3 }
|
|
|
|
adGenY1731LmmSessionTargetRemoteMepIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target MEPID for this LMM session"
|
|
::= { adGenY1731LmmSessionTransmitEntry 4 }
|
|
|
|
adGenY1731LmmSessionTargetMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target MAC address for this LMM session"
|
|
::= { adGenY1731LmmSessionTransmitEntry 5 }
|
|
|
|
adGenY1731LmmSessionRowStatus
|
|
OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is used to create/delete a transmit LMM session of a Local
|
|
MEP. The only supported settings are createAndGo, createAndWait, and
|
|
destroy.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 6 }
|
|
|
|
adGenY1731LmmSessionAdminState
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the LMM transmit session.
|
|
|
|
True indicates that the LMM session is to function normally and
|
|
actively transmit LMMs towards the specified target, and false that
|
|
it is to cease functioning.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 7 }
|
|
|
|
adGenY1731LmmSessionStatus
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(1),
|
|
notRunning(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status of the LMM transmit session. The minimum
|
|
attributes that need to be set before a MEP can transmit LMMs towards
|
|
the target are: Target MEPID or MAC Address and admin state. If a
|
|
MEPID is used to specify the target then the local MEP must have
|
|
received a CCM from the remote MEP in-order to learn its MAC address.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 8 }
|
|
|
|
adGenY1731LmmSessionStatusString
|
|
OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status string of the LMM transmit session. If the session
|
|
is expected to be active but is not able to be due to a provisioning
|
|
issue or conflict, this string will explain the reason.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 9 }
|
|
|
|
adGenY1731LmmSessionInterframeDelay
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Amount of time in milliseconds between LMM transmissions. The
|
|
supported range is 100 - 10,000 ms and the default value is 1000 ms.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 10 }
|
|
|
|
adGenY1731LmmSessionMeasurementInterval
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (60..900)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in seconds over which statistics are generated. The supported
|
|
range is 60 - 900 seconds and the default value is 60. The statistics
|
|
calculated for a measurement interval are stored in the averaged data
|
|
file. The data for the current and previous intervals is available via
|
|
the adGenY1731LmmSessionResultTable.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 11 }
|
|
|
|
adGenY1731LmmSessionSize
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of the LMM in bytes. The size encompasses the entire Ethernet
|
|
frame from the header through the FCS.
|
|
|
|
The supported values are:
|
|
0 to indicate Data TLV should not be included in LMM sent.
|
|
64 to 2000 bytes to indicate the DataTLV should be included to increase
|
|
the frame length to the specified size.
|
|
|
|
If the Data TLV is not included, the LMM will be sent with the minimum
|
|
Ethernet frame size of 64-bytes but it will not contain the DataTLV. A
|
|
zero-pad will be used to fulfill the minimum length requirement.
|
|
|
|
The default value is 0.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 12 }
|
|
|
|
adGenY1731LmmSessionData
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data pattern to be used when padding is required to meet the size
|
|
setting. The default value is 0x00 0x00.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 13 }
|
|
|
|
adGenY1731LmmSessionBulkDataExportFileTypes
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
average(2),
|
|
raw(3),
|
|
averageAndRaw(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines which, if any, files are generated by this LMM transmit
|
|
session. The files are used to store single-ended frame-loss
|
|
statistics. The average setting will enable storage of statistics
|
|
generated by each measurement interval. The raw setting will enable
|
|
storage for each single-ended frame-loss sample. The averageAndRaw
|
|
setting will result in both files being generated.
|
|
"
|
|
::= { adGenY1731LmmSessionTransmitEntry 14 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP Linktrace Message(LTM)
|
|
--=============================================================================
|
|
adGenY1731LocalMepLtmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepLtmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 Local MEP Linktrace table. A Local MEP is one that resides
|
|
on an interface of the system. This table will enable the user to
|
|
configure in preparation for starting a Linktrace session.
|
|
"
|
|
::= { adGenY1731LocalMepLtm 1 }
|
|
|
|
adGenY1731LocalMepLtmEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepLtmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 Local MEP Linktrace table."
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier }
|
|
::= { adGenY1731LocalMepLtmTable 1 }
|
|
|
|
AdGenY1731LocalMepLtmEntry ::= SEQUENCE {
|
|
|
|
adGenY1731LocalMepLtmNextTransactionId Unsigned32,
|
|
adGenY1731LocalMepUnexpLtrIn Counter32,
|
|
adGenY1731LocalMepTransmitLtmStatus TruthValue,
|
|
adGenY1731LocalMepTransmitLtmFlags BITS,
|
|
adGenY1731LocalMepTransmitLtmTargetMacAddress MacAddress,
|
|
adGenY1731LocalMepTransmitLtmTargetMepId Integer32,
|
|
adGenY1731LocalMepTransmitLtmTargetIsMepId TruthValue,
|
|
adGenY1731LocalMepTransmitLtmTtl Unsigned32,
|
|
adGenY1731LocalMepTransmitLtmResult TruthValue,
|
|
adGenY1731LocalMepTransmitLtmTransactionId Unsigned32,
|
|
adGenY1731LocalMepTransmitLtmEgressIdentifier OCTET STRING,
|
|
adGenY1731LocalMepTransmitLtmStatusString DisplayString,
|
|
adGenY1731LocalMepTransmitLtmConfigStatus TruthValue,
|
|
adGenY1731LocalMepLtmActive TruthValue,
|
|
adGenY1731LocalMepLtmTotalOut Counter32,
|
|
adGenY1731LocalMepLtrTotalIn Counter32,
|
|
adGenY1731LocalMepLtrTotalInvalidIn Counter32,
|
|
adGenY1731LocalMepLtrTotalValidIn Counter32
|
|
}
|
|
|
|
adGenY1731LocalMepLtmNextTransactionId
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Next transaction identifier to be sent in a Linktrace message. This
|
|
transaction identifier value can be zero because it wraps around.
|
|
"
|
|
::= { adGenY1731LocalMepLtmEntry 1 }
|
|
|
|
adGenY1731LocalMepUnexpLtrIn
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of unexpected LTRs received."
|
|
::= { adGenY1731LocalMepLtmEntry 2 }
|
|
|
|
adGenY1731LocalMepTransmitLtmStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the bridge port to indicate that another
|
|
LTM may be transmitted. Reset to false by the MEP Linktrace Initiator
|
|
State Machine."
|
|
DEFVAL { true }
|
|
::= { adGenY1731LocalMepLtmEntry 3 }
|
|
|
|
adGenY1731LocalMepTransmitLtmFlags
|
|
OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
useFDBonly (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flags field for LTMs transmitted by the MEP."
|
|
DEFVAL { {useFDBonly } }
|
|
::= { adGenY1731LocalMepLtmEntry 4 }
|
|
|
|
adGenY1731LocalMepTransmitLtmTargetMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast destination
|
|
MAC address. This address will be used if the value of the column
|
|
adGenY1731LocalMepTransmitLtmTargetIsMepId is 'false'.
|
|
"
|
|
::= { adGenY1731LocalMepLtmEntry 5 }
|
|
|
|
adGenY1731LocalMepTransmitLtmTargetMepId
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of the Target MAC Address Field to be transmitted. The
|
|
MAC address to be used will be retrieved from the Local MEP's Remote
|
|
MEP database by using the MEPID specified to perform the look-up. This
|
|
address will be used if the value of the column
|
|
adGenY1731LocalMepTransmitLtmTargetIsMepId is 'true'.
|
|
"
|
|
::= { adGenY1731LocalMepLtmEntry 6 }
|
|
|
|
adGenY1731LocalMepTransmitLtmTargetIsMepId
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for Linktrace
|
|
transmission. False indicates that unicast destination MAC address of
|
|
the target MEP is used for Linktrace transmission.
|
|
"
|
|
::= { adGenY1731LocalMepLtmEntry 7 }
|
|
|
|
adGenY1731LocalMepTransmitLtmTtl
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LTM TTL field. Default value, if not specified, is 64. The TTL
|
|
field indicates the number of hops remaining to the LTM.
|
|
Decremented by 1 by each Linktrace Responder that handles the LTM.
|
|
The value returned in the LTR is one less than that received in the
|
|
LTM. If the LTM TTL is 0 or 1, the LTM is not forwarded to the next
|
|
hop, and if 0, no LTR is generated.
|
|
"
|
|
DEFVAL {64}
|
|
::= { adGenY1731LocalMepLtmEntry 8 }
|
|
|
|
adGenY1731LocalMepTransmitLtmResult
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
|
|
true The Linktrace Message will be (or has been) sent.
|
|
false The Linktrace Message will not be sent.
|
|
"
|
|
DEFVAL { true }
|
|
::= { adGenY1731LocalMepLtmEntry 9 }
|
|
|
|
adGenY1731LocalMepTransmitLtmTransactionId
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LTM Transaction Identifier (adGenY1731LocalMepLtmNextTransactionId)
|
|
of the LTM sent. The value returned is undefined if
|
|
adGenY1731LocalMepTransmitLtmResult is false.
|
|
"
|
|
::= { adGenY1731LocalMepLtmEntry 10 }
|
|
|
|
adGenY1731LocalMepTransmitLtmEgressIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the MEP Linktrace Initiator that is originating, or the
|
|
Linktrace Responder that is forwarding, this LTM. The low-order six
|
|
octets contain a 48-bit IEEE MAC address unique to the system in which
|
|
the MEP Linktrace Initiator or Linktrace Responder resides. The
|
|
high-order two octets contain a value sufficient to uniquely identify
|
|
the MEP Linktrace Initiator or Linktrace Responder within that system.
|
|
|
|
For most Bridges, the address of any MAC attached to the Bridge will
|
|
suffice for the low-order six octets, and 0 for the high-order octets.
|
|
In some situations, e.g., if multiple virtual Bridges utilizing
|
|
emulated LANs are implemented in a single physical system, the
|
|
high-order two octets can be used to differentiate among the
|
|
transmitting entities.
|
|
|
|
The value returned is undefined if adGenY1731LocalMepTransmitLtmResult
|
|
is false.
|
|
"
|
|
::= { adGenY1731LocalMepLtmEntry 11 }
|
|
|
|
adGenY1731LocalMepTransmitLtmStatusString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Linktrace error status contains a string indicating the reason they
|
|
the Lintkrace transmission attempt failed.
|
|
"
|
|
::= { adGenY1731LocalMepLtmEntry 12 }
|
|
|
|
adGenY1731LocalMepTransmitLtmConfigStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True means the MEP is ready for configuring LTM and a false means the MEP
|
|
is under LTM configuration. This flag is used to prevent simultaneous
|
|
configuration by more than one user. If one minute has passed since the
|
|
last LocalMepLtm attribute was set, then it is assume the user has abandoned
|
|
configuring the session and the adGenY1731LocalMepTransmitLtmConfigStatus will be
|
|
reset to true.
|
|
"
|
|
::= { adGenY1731LocalMepLtmEntry 13 }
|
|
|
|
adGenY1731LocalMepLtmActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Start or stop LTM transmission. By writing true, start LTM transmisson.
|
|
By writing false, stop LTM transmission
|
|
"
|
|
DEFVAL { false }
|
|
::= {adGenY1731LocalMepLtmEntry 14 }
|
|
|
|
adGenY1731LocalMepLtmTotalOut
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LTMs transmitted by the Local MEP."
|
|
::= { adGenY1731LocalMepLtmEntry 15 }
|
|
|
|
adGenY1731LocalMepLtrTotalIn
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LTRs received by the Local MEP."
|
|
::= { adGenY1731LocalMepLtmEntry 16 }
|
|
|
|
adGenY1731LocalMepLtrTotalInvalidIn
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of invalid LTRs received by the Local MEP."
|
|
::= { adGenY1731LocalMepLtmEntry 17 }
|
|
|
|
adGenY1731LocalMepLtrTotalValidIn
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of valid LTRs received by the Local MEP."
|
|
::= { adGenY1731LocalMepLtmEntry 18 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP Linktrace Session Table
|
|
--=============================================================================
|
|
adGenY1731LocalMepLtSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepLtSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 Local MEP Linktrace session table. This table contains a list
|
|
of Linktrace sessions and the counters associated with each session.
|
|
"
|
|
::= { adGenY1731LocalMepLtm 2 }
|
|
|
|
adGenY1731LocalMepLtSessionEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepLtSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 Local MEP Linktrace session table."
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier,
|
|
adGenY1731LocalMepLtmTransactionId}
|
|
::= { adGenY1731LocalMepLtSessionTable 1 }
|
|
|
|
AdGenY1731LocalMepLtSessionEntry ::= SEQUENCE {
|
|
adGenY1731LocalMepLtmTransactionId Unsigned32,
|
|
adGenY1731LocalMepLtmOut Counter32,
|
|
adGenY1731LocalMepLtrIn Counter32,
|
|
adGenY1731LocalMepLtrInvalidIn Counter32,
|
|
adGenY1731LocalMepLtrValidIn Counter32,
|
|
adGenY1731LocalMepLtTimeRemaining Unsigned32
|
|
}
|
|
|
|
adGenY1731LocalMepLtmTransactionId
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transaction identifier value in LTM transmitted for this Linktrace
|
|
session.
|
|
"
|
|
::= { adGenY1731LocalMepLtSessionEntry 1}
|
|
|
|
adGenY1731LocalMepLtmOut
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LTM transmitted for this Linktrace session."
|
|
::= { adGenY1731LocalMepLtSessionEntry 2 }
|
|
|
|
adGenY1731LocalMepLtrIn
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LTRs received for this Linktrace session."
|
|
::= { adGenY1731LocalMepLtSessionEntry 3 }
|
|
|
|
adGenY1731LocalMepLtrInvalidIn
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LTRs received and discarded for this Linktrace session
|
|
due to invalid formatting.
|
|
"
|
|
::= { adGenY1731LocalMepLtSessionEntry 4 }
|
|
|
|
adGenY1731LocalMepLtrValidIn
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LTRs received and processed as valid for this Linktrace
|
|
session.
|
|
"
|
|
::= { adGenY1731LocalMepLtSessionEntry 5 }
|
|
|
|
adGenY1731LocalMepLtTimeRemaining OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each Linktrace sequence will run for a fixed period of time. This
|
|
counter indicates how much time is remaining. When the counter is 0,
|
|
there are results in the Linktrace cache. If this object does not exist
|
|
for a given index, then there are no results in the cache for that
|
|
MEP/Transaction ID combination.
|
|
"
|
|
::= { adGenY1731LocalMepLtSessionEntry 6 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP Linktrace Reply Table
|
|
--=============================================================================
|
|
adGenY1731LocalMepLtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepLtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 Local MEP Linktrace reply table. This table contains a list
|
|
of Linktrace replies received by a specific MEP in response to a
|
|
Linktrace message.
|
|
"
|
|
::= { adGenY1731LocalMepLtm 3 }
|
|
|
|
adGenY1731LocalMepLtrEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepLtrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 Local MEP Linktrace reply table."
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier,
|
|
adGenY1731LocalMepLtrTransactionId,
|
|
adGenY1731LocalMepLtrReceiveOrder }
|
|
::= { adGenY1731LocalMepLtrTable 1 }
|
|
|
|
AdGenY1731LocalMepLtrEntry ::= SEQUENCE {
|
|
adGenY1731LocalMepLtrTransactionId Unsigned32,
|
|
adGenY1731LocalMepLtrReceiveOrder Unsigned32,
|
|
adGenY1731LocalMepLtrTtl Unsigned32,
|
|
adGenY1731LocalMepLtrForwarded TruthValue,
|
|
adGenY1731LocalMepLtrTerminalMep TruthValue,
|
|
adGenY1731LocalMepLtrLastEgressIdentifier OCTET STRING,
|
|
adGenY1731LocalMepLtrNextEgressIdentifier OCTET STRING,
|
|
adGenY1731LocalMepLtrRelay INTEGER,
|
|
adGenY1731LocalMepLtrChassisIdSubtype INTEGER,
|
|
adGenY1731LocalMepLtrChassisId LldpChassisId,
|
|
adGenY1731LocalMepLtrManAddressDomain TDomain,
|
|
adGenY1731LocalMepLtrManAddress TAddress,
|
|
adGenY1731LocalMepLtrIngress INTEGER,
|
|
adGenY1731LocalMepLtrIngressMac MacAddress,
|
|
adGenY1731LocalMepLtrIngressPortIdSubtype LldpPortIdSubtype,
|
|
adGenY1731LocalMepLtrIngressPortId LldpPortId,
|
|
adGenY1731LocalMepLtrEgress INTEGER,
|
|
adGenY1731LocalMepLtrEgressMac MacAddress,
|
|
adGenY1731LocalMepLtrEgressPortIdSubtype LldpPortIdSubtype,
|
|
adGenY1731LocalMepLtrEgressPortId LldpPortId,
|
|
adGenY1731LocalMepLtrOrganizationSpecificTlv OCTET STRING
|
|
}
|
|
|
|
adGenY1731LocalMepLtrTransactionId
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transaction identifier returned by a previous transmit Linktrace
|
|
message command, indicating which LTM's response is going to be
|
|
returned.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 1}
|
|
|
|
adGenY1731LocalMepLtrReceiveOrder
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple LTRs with the same LTR
|
|
Transaction Identifier field value. adGenY1731LocalMepLtrReceiveOrder
|
|
are assigned sequentially from 1, in the order that the Linktrace
|
|
Initiator received the LTRs.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 2 }
|
|
|
|
adGenY1731LocalMepLtrTtl
|
|
OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TTL field value for a returned LTR."
|
|
::= { adGenY1731LocalMepLtrEntry 3 }
|
|
|
|
adGenY1731LocalMepLtrForwarded
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if a LTM was forwarded by the responding MP, as returned in
|
|
the 'FwdYes' flag of the flags field.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 4 }
|
|
|
|
adGenY1731LocalMepLtrTerminalMep
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A boolean value stating whether the forwarded LTM reached a MEP within
|
|
the MEG, as returned in the Terminal MEP flag of the Flags field.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 5 }
|
|
|
|
adGenY1731LocalMepLtrLastEgressIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet field holding the Last Egress Identifier returned in the LTR
|
|
Egress Identifier TLV of the LTR. The Last Egress Identifier identifies
|
|
the MEP Linktrace Initiator that originated, or the Linktrace Responder
|
|
that forwarded, the LTM to which this LTR is the response. This is the
|
|
same value as the Egress Identifier TLV of that LTM.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 6 }
|
|
|
|
adGenY1731LocalMepLtrNextEgressIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An octet field holding the Next Egress Identifier returned in the LTR
|
|
Egress Identifier TLV of the LTR. The Next Egress Identifier
|
|
Identifies the Linktrace Responder that transmitted this LTR, and can
|
|
forward the LTM to the next hop. This is the same value as the Egress
|
|
Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the
|
|
Flags field is false, the contents of this field are undefined, i.e.,
|
|
any value can be transmitted, and the field is ignored by the receiver.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 7 }
|
|
|
|
adGenY1731LocalMepLtrRelay
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rlyHit (1),
|
|
rlyFdb (2),
|
|
rlyMpdb (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value returned in the Relay Action field."
|
|
::= { adGenY1731LocalMepLtrEntry 8 }
|
|
|
|
adGenY1731LocalMepLtrChassisIdSubtype
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nonePresent(0),
|
|
chassisComponent(1),
|
|
interfaceAlias(2),
|
|
portComponent(3),
|
|
macAddress(4),
|
|
networkAddress(5),
|
|
interfaceName(6),
|
|
local(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the format of the Chassis ID returned in the
|
|
Sender ID TLV of the LTR, if any.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 9 }
|
|
|
|
adGenY1731LocalMepLtrChassisId
|
|
OBJECT-TYPE
|
|
SYNTAX LldpChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Chassis ID returned in the Sender ID TLV of the LTR, if any. The
|
|
format of this object is determined by the value of the
|
|
adGenY1731LocalMepLtrChassisIdSubtype object.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 10 }
|
|
|
|
adGenY1731LocalMepLtrManAddressDomain
|
|
OBJECT-TYPE
|
|
SYNTAX TDomain
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TDomain that identifies the type and format of the related
|
|
adGenY1731LocalMepLtrManAddress object, used to access the SNMP agent
|
|
of the system transmitting the LTR. Received in the LTR Sender ID TLV
|
|
from that system.
|
|
|
|
Typical values will be one of (not all inclusive) list:
|
|
|
|
|
|
snmpUDPDomain (from SNMPv2-TM, RFC3417)
|
|
snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789)
|
|
|
|
The value 'zeroDotZero' (from RFC2578) indicates 'no management address
|
|
was present in the LTR', in which case the related object
|
|
adGenY1731LocalMepLtrManAddress must have a zero-length OCTET STRING as
|
|
a value.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 11 }
|
|
|
|
adGenY1731LocalMepLtrManAddress
|
|
OBJECT-TYPE
|
|
SYNTAX TAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TAddress that can be used to access the SNMP agent of the system
|
|
transmitting the CCM, received in the CCM Sender ID TLV from that
|
|
system.
|
|
|
|
If the related object adGenY1731LocalMepLtrManAddressDomain contains
|
|
the value 'zeroDotZero', this object dot1agCfmLtrManAddress must have
|
|
a zero-length OCTET STRING as a value.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 12 }
|
|
|
|
adGenY1731LocalMepLtrIngress
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ingNoTlv (0),
|
|
ingOk (1),
|
|
ingDown (2),
|
|
ingBlocked (3),
|
|
ingVid (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value returned in the Ingress Action Field of the LTM. The value
|
|
ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 13 }
|
|
|
|
adGenY1731LocalMepLtrIngressMac
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address returned in the ingress MAC address field. If the
|
|
adGenY1731LocalMepLtrIngress object contains the value ingNoTlv(0),
|
|
then the contents of this object are meaningless.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 14 }
|
|
|
|
adGenY1731LocalMepLtrIngressPortIdSubtype
|
|
OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the Ingress Port ID.
|
|
|
|
If the adGenY1731LocalMepLtrIngress object contains the value
|
|
ingNoTlv(0), then the contents of this object are meaningless.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 15 }
|
|
|
|
adGenY1731LocalMepLtrIngressPortId
|
|
OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ingress Port ID.
|
|
|
|
The format of this object is determined by the value of the
|
|
adGenY1731LocalMepLtrIngressPortIdSubtype object. If the
|
|
adGenY1731LocalMepLtrIngress object contains the value ingNoTlv(0),
|
|
then the contents of this object are meaningless.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 16 }
|
|
|
|
adGenY1731LocalMepLtrEgress
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
egrNoTlv (0),
|
|
egrOK (1),
|
|
egrDown (2),
|
|
egrBlocked (3),
|
|
egrVid (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value returned in the Egress Action Field of the LTR. The value
|
|
egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTR.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 17 }
|
|
|
|
adGenY1731LocalMepLtrEgressMac
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address returned in the egress MAC address field.
|
|
|
|
If the adGenY1731LocalMepLtrIngress object contains the value
|
|
egrNoTlv(0), then the contents of this object are meaningless.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 18 }
|
|
|
|
adGenY1731LocalMepLtrEgressPortIdSubtype
|
|
OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Format of the egress Port ID.
|
|
|
|
If the adGenY1731LocalMepLtrEgress object contains the value
|
|
egrNoTlv(0), then the contents of this object are meaningless.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 19 }
|
|
|
|
adGenY1731LocalMepLtrEgressPortId
|
|
OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Egress Port ID.
|
|
|
|
The format of this object is determined by the value of the
|
|
adGenY1731LocalMepLtrEgressPortIdSubtype object. If the
|
|
adGenY1731LocalMepLtrEgress object contains the value egrNoTlv(0),
|
|
then the contents of this object are meaningless.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 20 }
|
|
|
|
adGenY1731LocalMepLtrOrganizationSpecificTlv
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0|4..1500))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All Organization specific TLVs returned in the LTR, if any. Includes
|
|
all octets including and following the TLV Length field of each TLV,
|
|
concatenated together.
|
|
"
|
|
::= { adGenY1731LocalMepLtrEntry 21 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP Linktrace Responder Table
|
|
--=============================================================================
|
|
adGenY1731LocalMepLtmResponderTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731LocalMepLtmResponderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Y.1731 Local MEP Linktrace Responder table. This table contains
|
|
the counters associated with each Local MEP's Linktrace Responder.
|
|
"
|
|
::= { adGenY1731LocalMepLtm 4 }
|
|
|
|
adGenY1731LocalMepLtmResponderEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731LocalMepLtmResponderEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Y.1731 Local MEP Linktrace Responder table."
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier}
|
|
::= { adGenY1731LocalMepLtmResponderTable 1 }
|
|
|
|
AdGenY1731LocalMepLtmResponderEntry ::= SEQUENCE {
|
|
adGenY1731LocalMepLtmIn Counter32,
|
|
adGenY1731LocalMepLtmDiscardedInvalidFormat Counter32,
|
|
adGenY1731LocalMepLtmDiscardedTtl Counter32,
|
|
adGenY1731LocalMepLtmDiscardedTargetMac Counter32,
|
|
adGenY1731LocalMepLtrOut Counter32
|
|
}
|
|
|
|
|
|
adGenY1731LocalMepLtmIn
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of valid LTMs received."
|
|
::= { adGenY1731LocalMepLtmResponderEntry 1 }
|
|
|
|
adGenY1731LocalMepLtmDiscardedInvalidFormat
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number LTMs discarded due to invalid format."
|
|
::= { adGenY1731LocalMepLtmResponderEntry 2 }
|
|
|
|
adGenY1731LocalMepLtmDiscardedTtl
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LTMs discarded due to invalid Ttl."
|
|
::= { adGenY1731LocalMepLtmResponderEntry 3 }
|
|
|
|
adGenY1731LocalMepLtmDiscardedTargetMac
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LTMs discarded due to invalid target MAC address."
|
|
::= { adGenY1731LocalMepLtmResponderEntry 4 }
|
|
|
|
adGenY1731LocalMepLtrOut
|
|
OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of LTRs transmitted."
|
|
::= { adGenY1731LocalMepLtmResponderEntry 5 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-1DM Scalars
|
|
--=============================================================================
|
|
|
|
adGenY1731OneDmSessionMaxNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A systemwide value representing the maximum number of one-way frame
|
|
delay (ETH-1DM) sessions that can be created across all local MEPs on
|
|
the device.
|
|
"
|
|
::= { adGenY1731OneDmScalars 1 }
|
|
|
|
adGenY1731OneDmSessionCurrentNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of 1DM sessions created."
|
|
::= { adGenY1731OneDmScalars 2 }
|
|
|
|
adGenY1731OneDmSessionLastCreateError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last error that occurred while attempting to create
|
|
an 1DM Session Transmit entry (adGenY1731OneDmSessionTransmitEntry).
|
|
"
|
|
::= { adGenY1731OneDmScalars 3 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-1DM Transmit Table
|
|
--=============================================================================
|
|
adGenY1731OneDmSessionTransmitTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731OneDmSessionTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The one-way frame-delay (ETH-1DM) session table for a given local MEP.
|
|
A local MEP's 1DM sessions can be created, edited, and deleted using
|
|
this table. A local MEP can target a remote MEP to run one-way frame
|
|
delay measurements between the local MEP and another remote MEP in the
|
|
MEG.
|
|
|
|
The target can be specified by either using a MAC address of the target
|
|
MEP or the MEPID of the target MEP. For the 1DM session to go active,
|
|
the local MEP must be successfully receiving CCMs from the remote MEP
|
|
in order to specify the RMEPID as the target.
|
|
"
|
|
::= { adGenY1731LocalMepOneDm 2 }
|
|
|
|
adGenY1731OneDmSessionTransmitEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731OneDmSessionTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A one-way frame-delay (1DM) performance monitoring session of a
|
|
local MEP. A 1DM PM session is unique based on target identifier
|
|
and VLAN priority. The target identifier is either a MAC address
|
|
or RMEPID. Inclusion of VLAN priority in the index allows a local MEP
|
|
to simultaneously run several 1DM PM sessions between it and the target
|
|
at various CoS levels.
|
|
"
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier,
|
|
adGenY1731OneDmSessionTargetRmepIdOrMacAddress,
|
|
adGenY1731OneDmSessionTarget,
|
|
adGenY1731OneDmSessionVlanPriority
|
|
}
|
|
::= { adGenY1731OneDmSessionTransmitTable 1 }
|
|
|
|
AdGenY1731OneDmSessionTransmitEntry ::= SEQUENCE {
|
|
adGenY1731OneDmSessionTargetRmepIdOrMacAddress INTEGER,
|
|
adGenY1731OneDmSessionTarget OCTET STRING,
|
|
adGenY1731OneDmSessionVlanPriority Integer32,
|
|
adGenY1731OneDmSessionTargetRemoteMepIdentifier Integer32,
|
|
adGenY1731OneDmSessionTargetMacAddress MacAddress,
|
|
adGenY1731OneDmSessionRowStatus RowStatus,
|
|
adGenY1731OneDmSessionAdminState TruthValue,
|
|
adGenY1731OneDmSessionStatus INTEGER,
|
|
adGenY1731OneDmSessionStatusString DisplayString,
|
|
adGenY1731OneDmSessionInterframeDelay Integer32,
|
|
adGenY1731OneDmSessionSize Integer32,
|
|
adGenY1731OneDmSessionData OCTET STRING
|
|
}
|
|
|
|
adGenY1731OneDmSessionTargetRmepIdOrMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rmepId(1),
|
|
macAddress(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the target specified is a MEPID or a unicast MAC
|
|
Address. If the target specified is a MEPID, the local MEP will not be
|
|
able to initiate the 1DM session until a CCM has been received from the
|
|
RMEP
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 1 }
|
|
|
|
adGenY1731OneDmSessionTarget
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Octet string defining the target for the 1DM session.
|
|
If adGenY1731OneDmSessionTargetRmepIdOrMacAddress indicates the target
|
|
is a MEPID then the octet string should represent a MEPID between the
|
|
range 1-8191. Otherwise, it should be the target's unicast MAC address
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 2 }
|
|
|
|
adGenY1731OneDmSessionVlanPriority
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Priority that will be used in all 1DM frames sent by this
|
|
1DM transmit session.
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 3 }
|
|
|
|
adGenY1731OneDmSessionTargetRemoteMepIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target MEPID for this 1DM session"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 4 }
|
|
|
|
adGenY1731OneDmSessionTargetMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target MAC address for this 1DM session"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 5 }
|
|
|
|
adGenY1731OneDmSessionRowStatus
|
|
OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is used to create/delete a transmit 1DM session of a Local
|
|
MEP. The only supported settings are createAndGo, createAndWait, and
|
|
destroy.
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 6 }
|
|
|
|
adGenY1731OneDmSessionAdminState
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the 1DM transmit session.
|
|
|
|
True indicates that the 1DM session is to function normally and
|
|
actively transmit 1DMs towards the specified target, and false that
|
|
it is to cease functioning.
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 7 }
|
|
|
|
adGenY1731OneDmSessionStatus
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(1),
|
|
notRunning(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status of the 1DM transmit session. The minimum
|
|
attributes that need to be set before a MEP can transmit 1DMs towards
|
|
the target are: Target MEPID or MAC Address and admin state. If a
|
|
MEPID is used to specify the target then the local MEP must have
|
|
received a CCM from the remote MEP in-order to learn its MAC address.
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 8 }
|
|
|
|
adGenY1731OneDmSessionStatusString
|
|
OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status string of the 1DM transmit session. If the session
|
|
is expected to be active but is not able to be due to a provisioning
|
|
issue or conflict, this string will explain the reason.
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 9 }
|
|
|
|
adGenY1731OneDmSessionInterframeDelay
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Amount of time in milliseconds between 1DM transmissions. The
|
|
supported range is 100 - 10,000 ms and the default value is 1000 ms.
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 10 }
|
|
|
|
adGenY1731OneDmSessionSize
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of the 1DM in bytes. The size encompasses the entire Ethernet
|
|
frame from the header through the FCS.
|
|
|
|
The supported values are:
|
|
0 to indicate Data TLV should not be included in 1DM sent.
|
|
64 to 2000 bytes to indicate the DataTLV should be included to increase
|
|
the frame length to the specified size.
|
|
|
|
If the Data TLV is not included, the 1DM will be sent with the minimum
|
|
Ethernet frame size of 64-bytes but it will not contain the DataTLV. A
|
|
zero-pad will be used to fulfill the minimum length requirement.
|
|
|
|
The default value is 0.
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 11 }
|
|
|
|
adGenY1731OneDmSessionData
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data pattern to be used when padding is required to meet the size
|
|
setting. The default value is 0x00 0x00.
|
|
"
|
|
::= { adGenY1731OneDmSessionTransmitEntry 12 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-1DM Receive Table
|
|
--=============================================================================
|
|
adGenY1731OneDmSessionReceiveTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731OneDmSessionReceiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The one-way frame-delay (ETH-1DM) receive table for a given local MEP.
|
|
|
|
The local MEP's 1DM receive attributes can be edited using this table.
|
|
These settings are common across all 1DM sessions the local MEP is
|
|
receiving.
|
|
|
|
As the receiver of 1DM frames, the Local MEP does not have any
|
|
information about the 1DM transmit configuration on the far-end RMEP
|
|
that is originating the 1DM frames and thus the receiving MEP cannot
|
|
pair the received 1DM frames with a 1DM transmit table entry. The
|
|
1DM receive attributes must be configured at the Local MEP scope.
|
|
"
|
|
::= { adGenY1731LocalMepOneDm 3 }
|
|
|
|
adGenY1731OneDmSessionReceiveEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731OneDmSessionReceiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The one-way frame-delay (1DM) performance monitoring session receive
|
|
attributes of a local MEP.
|
|
"
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier
|
|
}
|
|
::= { adGenY1731OneDmSessionReceiveTable 1 }
|
|
|
|
AdGenY1731OneDmSessionReceiveEntry ::= SEQUENCE {
|
|
adGenY1731OneDmSessionMeasurementInterval Integer32,
|
|
adGenY1731OneDmSessionBulkDataExportFileTypes INTEGER
|
|
}
|
|
|
|
adGenY1731OneDmSessionMeasurementInterval
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (60..900)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in seconds over which statistics are generated for received
|
|
one-way frame delay sessions. The supported range is 60 - 900 seconds
|
|
and the default value is 60. The statistics calculated for a
|
|
measurement interval are stored in the averaged data file. The data
|
|
for the current and previous intervals is available via the
|
|
adGenY1731OneDmSessionResultTable.
|
|
"
|
|
::= { adGenY1731OneDmSessionReceiveEntry 1 }
|
|
|
|
adGenY1731OneDmSessionBulkDataExportFileTypes
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
average(2),
|
|
raw(3),
|
|
averageAndRaw(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines which, if any, files are generated by one-way frame delays
|
|
calculated from received 1DM frames.
|
|
|
|
The files are used to store one-way frame-delay statistics.
|
|
The average setting will enable storage of statistics generated by
|
|
each measurement interval. The raw setting will enable storage
|
|
for each one-way frame-delay sample. The averageAndRaw setting
|
|
will result in both files being generated.
|
|
"
|
|
::= { adGenY1731OneDmSessionReceiveEntry 2 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-SLM Scalars
|
|
--=============================================================================
|
|
|
|
adGenY1731SlmSessionMaxNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A systemwide value representing the maximum number of SLM sessions
|
|
that can be created across all local MEPs on the device.
|
|
"
|
|
::= { adGenY1731SlmScalars 1 }
|
|
|
|
adGenY1731SlmSessionCurrentNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of SLM sessions created."
|
|
::= { adGenY1731SlmScalars 2 }
|
|
|
|
adGenY1731SlmSessionLastCreateError OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last error that occurred while attempting to create
|
|
an SLM Session Transmit entry (adGenY1731SlmSessionTransmitEntry).
|
|
"
|
|
::= { adGenY1731SlmScalars 3 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-SLM Transmit Table
|
|
--=============================================================================
|
|
adGenY1731SlmSessionTransmitTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731SlmSessionTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The synthetic single-ended frame-loss (SLM) session table for a given
|
|
local MEP. The main difference between synthetic frame-loss (ETH-SLM)
|
|
and normal frame-loss (ETH-LMM) is that ETH-SLM only counts the
|
|
synthetic it generates where as ETH-LMM counts all data frames.
|
|
|
|
A local MEP's SLM sessions can be created, edited, and deleted using
|
|
this table. A local MEP can target a remote MEP to run single-ended
|
|
frame-loss measurements using synthetic traffic between the two MEPs in
|
|
the MEG.
|
|
|
|
The target can be specified by either using a MAC address of the target
|
|
MEP or the MEPID of the target MEP. For the SLM session to go active,
|
|
the local MEP must be successfully receiving CCMs from the remote MEP
|
|
in order to specify the RMEPID as the target.
|
|
"
|
|
::= { adGenY1731LocalMepSlm 2 }
|
|
|
|
adGenY1731SlmSessionTransmitEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731SlmSessionTransmitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A synthetic single-ended frame-loss (SLM) performance monitoring
|
|
session of a local MEP. A SLM PM session is unique based on target
|
|
identifier and VLAN priority. The target identifier is either a MAC
|
|
address or RMEPID. Inclusion of VLAN priority in the index allows a
|
|
local MEP to simultaneously run several SLM PM sessions between it and
|
|
the target at various CoS levels.
|
|
"
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier,
|
|
adGenY1731SlmSessionTargetRmepIdOrMacAddress,
|
|
adGenY1731SlmSessionTarget,
|
|
adGenY1731SlmSessionVlanPriority
|
|
}
|
|
::= { adGenY1731SlmSessionTransmitTable 1 }
|
|
|
|
AdGenY1731SlmSessionTransmitEntry ::= SEQUENCE {
|
|
adGenY1731SlmSessionTargetRmepIdOrMacAddress INTEGER,
|
|
adGenY1731SlmSessionTarget OCTET STRING,
|
|
adGenY1731SlmSessionVlanPriority Integer32,
|
|
adGenY1731SlmSessionTargetRemoteMepIdentifier Integer32,
|
|
adGenY1731SlmSessionTargetMacAddress MacAddress,
|
|
adGenY1731SlmSessionRowStatus RowStatus,
|
|
adGenY1731SlmSessionAdminState TruthValue,
|
|
adGenY1731SlmSessionStatus INTEGER,
|
|
adGenY1731SlmSessionStatusString DisplayString,
|
|
adGenY1731SlmSessionInterframeDelay Integer32,
|
|
adGenY1731SlmSessionMeasurementInterval Integer32,
|
|
adGenY1731SlmSessionSize Integer32,
|
|
adGenY1731SlmSessionData OCTET STRING,
|
|
adGenY1731SlmSessionBulkDataExportFileTypes INTEGER
|
|
}
|
|
|
|
adGenY1731SlmSessionTargetRmepIdOrMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rmepId(1),
|
|
macAddress(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the target specified is a MEPID or a unicast MAC
|
|
Address. If the target specified is a MEPID the local MEP will not be
|
|
able to initiate the SLM session until a CCM has been received from the
|
|
RMEP
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 1 }
|
|
|
|
adGenY1731SlmSessionTarget
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..6))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Octet string defining the target for the SLM session.
|
|
If adGenY1731SlmSessionTargetRmepIdOrMacAddress indicates the target is
|
|
a MEPID then the octet string should represent a MEPID between the
|
|
range 1-8191. Otherwise, it should be the target's unicast MAC address
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 2 }
|
|
|
|
adGenY1731SlmSessionVlanPriority
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN Priority that will be used in all SLM frames sent by this
|
|
SLM transmit session.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 3 }
|
|
|
|
adGenY1731SlmSessionTargetRemoteMepIdentifier
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8191)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target MEPID for this SLM session"
|
|
::= { adGenY1731SlmSessionTransmitEntry 4 }
|
|
|
|
adGenY1731SlmSessionTargetMacAddress
|
|
OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Target MAC address for this SLM session"
|
|
::= { adGenY1731SlmSessionTransmitEntry 5 }
|
|
|
|
adGenY1731SlmSessionRowStatus
|
|
OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is used to create/delete a transmit SLM session of a Local
|
|
MEP. The only supported settings are createAndGo, createAndWait, and
|
|
destroy.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 6 }
|
|
|
|
adGenY1731SlmSessionAdminState
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the SLM transmit session.
|
|
|
|
True indicates that the SLM session is to function normally and
|
|
actively transmit SLMs towards the specified target, and false that
|
|
it is to cease functioning.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 7 }
|
|
|
|
adGenY1731SlmSessionStatus
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
running(1),
|
|
notRunning(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status of the SLM transmit session. The minimum
|
|
attributes that need to be set before a MEP can transmit SLMs towards
|
|
the target are: Target MEPID or MAC Address and admin state. If a
|
|
MEPID is used to specify the target then the local MEP must have
|
|
received a CCM from the remote MEP in-order to learn its MAC address.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 8 }
|
|
|
|
adGenY1731SlmSessionStatusString
|
|
OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational status string of the SLM transmit session. If the session
|
|
is expected to be active but is not able to be due to a provisioning
|
|
issue or conflict, this string will explain the reason.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 9 }
|
|
|
|
adGenY1731SlmSessionInterframeDelay
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (100..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Amount of time in milliseconds between SLM transmissions. The
|
|
supported range is 100 - 10,000 ms and the default value is 1000 ms.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 10 }
|
|
|
|
adGenY1731SlmSessionMeasurementInterval
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (60..900)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in seconds over which statistics are generated. The supported
|
|
range is 60 - 900 seconds and the default value is 60. The statistics
|
|
calculated for a measurement interval are stored in the averaged data
|
|
file. The data for the current and previous intervals is available via
|
|
the adGenY1731SlmSessionResultTable.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 11 }
|
|
|
|
adGenY1731SlmSessionSize
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of the SLM in bytes. The size encompasses the entire Ethernet
|
|
frame from the header through the FCS.
|
|
|
|
The supported values are:
|
|
0 to indicate Data TLV should not be included in SLM sent.
|
|
64 to 2000 bytes to indicate the DataTLV should be included to increase
|
|
the frame length to the specified size.
|
|
|
|
If the Data TLV is not included, the SLM will be sent with the minimum
|
|
Ethernet frame size of 64-bytes but it will not contain the DataTLV. A
|
|
zero-pad will be used to fulfill the minimum length requirement.
|
|
|
|
The default value is 0.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 12 }
|
|
|
|
adGenY1731SlmSessionData
|
|
OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data pattern to be used when padding is required to meet the size
|
|
setting. The default value is 0x00 0x00.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 13 }
|
|
|
|
adGenY1731SlmSessionBulkDataExportFileTypes
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
average(2),
|
|
raw(3),
|
|
averageAndRaw(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines which, if any, files are generated by this SLM transmit
|
|
session. The files are used to store synthetic single-ended frame-loss
|
|
statistics. The average setting will enable storage of statistics
|
|
generated by each measurement interval. The raw setting will enable
|
|
storage for each synthetic single-ended frame-loss sample. The
|
|
averageAndRaw setting will result in both files being generated.
|
|
"
|
|
::= { adGenY1731SlmSessionTransmitEntry 14 }
|
|
|
|
--=============================================================================
|
|
--Y.1731 Local MEP ETH-CLM Receiver Properties Table
|
|
--=============================================================================
|
|
adGenY1731ClmReceiverTable
|
|
OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AdGenY1731ClmReceiverEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A local MEP can be provisioned to calculate near-end frame-loss between
|
|
it and a known RMEP by monitoring sequence numbers in received CCMs.
|
|
This method is referred to as CLM and if the local MEP is enabled for
|
|
CLM it will perform the calculation for each RMEP in its MEP-database.
|
|
"
|
|
::= { adGenY1731LocalMepClm 1 }
|
|
|
|
adGenY1731ClmReceiverEntry OBJECT-TYPE
|
|
SYNTAX AdGenY1731ClmReceiverEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The receive properties for a local MEP's CLM function. The properties
|
|
are unique to a local MEP.
|
|
"
|
|
INDEX { adGenY1731MegLevel,
|
|
adGenY1731MegNameFormat,
|
|
adGenY1731MegNameLengthAndName,
|
|
adGenY1731LocalMepIdentifier
|
|
}
|
|
::= { adGenY1731ClmReceiverTable 1 }
|
|
|
|
AdGenY1731ClmReceiverEntry ::= SEQUENCE {
|
|
adGenY1731ClmReceiverEnabled TruthValue,
|
|
adGenY1731ClmReceiverMeasurementInterval Integer32,
|
|
adGenY1731ClmReceiverBulkDataExportFileTypes INTEGER
|
|
}
|
|
|
|
adGenY1731ClmReceiverEnabled
|
|
OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the administrative state of the local MEP's ETH-CLM
|
|
function. If the ETH-CLM function is enabled, the MEP will monitor the
|
|
sequence-numbers in CCMs received from known RMEPs for frame-loss.
|
|
"
|
|
::= { adGenY1731ClmReceiverEntry 1 }
|
|
|
|
adGenY1731ClmReceiverMeasurementInterval
|
|
OBJECT-TYPE
|
|
SYNTAX Integer32 (60..900)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in seconds over which statistics are generated. The supported
|
|
range is 60 - 900 seconds and the default value is 60. The statistics
|
|
calculated for a measurement interval are stored in the averaged data
|
|
file.
|
|
"
|
|
::= { adGenY1731ClmReceiverEntry 2 }
|
|
|
|
adGenY1731ClmReceiverBulkDataExportFileTypes
|
|
OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
average(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines which, if any, files are generated by this local MEP's CLM
|
|
function. The files are used to store near-end frame-loss statistics
|
|
calculated by the local MEP's CLM function. The average setting will
|
|
enable storage of statistics generated by each measurement interval.
|
|
"
|
|
::= { adGenY1731ClmReceiverEntry 3 }
|
|
|
|
|
|
--==============================================================================
|
|
--==============================================================================
|
|
--==============================================================================
|
|
|
|
|
|
|
|
adGenY1731PMFlashFilesClear NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates all current and stored bulk PM files have been
|
|
successfully exported to the server."
|
|
|
|
--#TYPE "Status - Alarm"
|
|
--#SUMMARY "Y1731 1: Y1731 PM Flash File Clear"
|
|
--#SEVERITY MINOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adGenY1731Traps 1 }
|
|
|
|
adGenY1731PMFlashFilesSet NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
adTrapInformSeqNum,
|
|
sysName,
|
|
adGenSlotInfoIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates that the Y1731 PM File transferred to flash
|
|
because bulk data export transfer failed."
|
|
--#TYPE "Status - Alarm"
|
|
--#SUMMARY "Y1731 2: Y1731 PM Flash File Set"
|
|
--#SEVERITY MINOR
|
|
--#GENERIC 6
|
|
--#CATEGORY "Error Events"
|
|
--#SOURCE_ID "A"
|
|
--#TIMEINDEX 0
|
|
::= { adGenY1731Traps 2 }
|
|
|
|
END
|
|
|
|
|