2432 lines
56 KiB
Plaintext
2432 lines
56 KiB
Plaintext
--Acksys enterprise MIB V2.22.0
|
|
-- This MIB is compatible with SNMP V2c
|
|
-- Clean with VIM command: :g/@[GS]ET/d
|
|
|
|
ACKSYS-WLG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises,mgmt, IpAddress, Counter32, Gauge32,
|
|
TimeTicks
|
|
FROM SNMPv2-SMI
|
|
OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI;
|
|
|
|
--Module Identity
|
|
acksysMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201601291500Z"
|
|
ORGANIZATION "ACKSYS Communication & Systems"
|
|
CONTACT-INFO "support@acksys.fr"
|
|
DESCRIPTION "SNMPv2C Module for ACKSYS Solutions"
|
|
::= { acksys 2 }
|
|
|
|
-- textual conventions
|
|
|
|
DisplayString ::=
|
|
OCTET STRING
|
|
-- This data type is used to model textual information taken
|
|
-- from the NVT ASCII character set. By convention, objects
|
|
-- with this syntax are declared as having
|
|
|
|
--
|
|
-- SIZE (0..255)
|
|
|
|
PhysAddress ::=
|
|
OCTET STRING(SIZE (6))
|
|
-- This data type is used to model media addresses. For many
|
|
-- types of media, this will be in a binary representation.
|
|
-- For example, an ethernet address would be represented as
|
|
-- a string of 6 octets.
|
|
|
|
acksys OBJECT IDENTIFIER ::= { enterprises 28097 }
|
|
|
|
-- Acksys specific MIBs.
|
|
network-product OBJECT IDENTIFIER ::= { acksys 1 }
|
|
c-key-management OBJECT IDENTIFIER ::= { acksys 4 }
|
|
alarmSettings OBJECT IDENTIFIER ::= { acksys 5 }
|
|
powerStatus OBJECT IDENTIFIER ::= { acksys 6 }
|
|
|
|
wifiInterface OBJECT IDENTIFIER ::= { network-product 1 }
|
|
administration OBJECT IDENTIFIER ::= { network-product 2 }
|
|
os-stat OBJECT IDENTIFIER ::= { network-product 3 }
|
|
productSpecific OBJECT IDENTIFIER ::= { network-product 4 }
|
|
lanInterface OBJECT IDENTIFIER ::= {network-product 5}
|
|
|
|
settings OBJECT IDENTIFIER ::= { wifiInterface 1 }
|
|
bridge-mode OBJECT IDENTIFIER ::= { wifiInterface 2 }
|
|
access-point-mode OBJECT IDENTIFIER ::= { wifiInterface 3}
|
|
advancedSettings OBJECT IDENTIFIER ::= { wifiInterface 4 }
|
|
|
|
bridgeAPFiltering OBJECT IDENTIFIER ::= { bridge-mode 8}
|
|
|
|
bridgeRoaming OBJECT IDENTIFIER ::= { bridge-mode 9}
|
|
bridgeWirelessScan OBJECT IDENTIFIER ::= { bridge-mode 11}
|
|
bridgeNAT OBJECT IDENTIFIER ::= { bridge-mode 12}
|
|
bridgeNatPortForwarding OBJECT IDENTIFIER ::= { bridgeNAT 11}
|
|
|
|
bridgeRoamingAdvanced OBJECT IDENTIFIER ::={bridgeRoaming 1}
|
|
|
|
|
|
apClientFiltering OBJECT IDENTIFIER ::= { access-point-mode 4}
|
|
|
|
securitySettings OBJECT IDENTIFIER ::= { settings 9 }
|
|
securityWEP OBJECT IDENTIFIER ::= { securitySettings 2 }
|
|
securityWPA-WPA2 OBJECT IDENTIFIER ::= { securitySettings 3}
|
|
securityPresharedKey OBJECT IDENTIFIER ::= { securityWPA-WPA2 1}
|
|
securityRadius OBJECT IDENTIFIER ::= { securityWPA-WPA2 2} --Obsolete
|
|
securityBackupRadius OBJECT IDENTIFIER ::= { securityWPA-WPA2 3} --Obsolete
|
|
securityRadiusAP OBJECT IDENTIFIER ::= { securityRadius 6}
|
|
securityRadiusBridge OBJECT IDENTIFIER ::= { securityRadius 7}
|
|
securityRadiusAPBackup OBJECT IDENTIFIER ::= { securityRadiusAP 6}
|
|
wds OBJECT IDENTIFIER ::= { access-point-mode 5}
|
|
lanTimeOutSettings OBJECT IDENTIFIER ::= { access-point-mode 8}
|
|
|
|
|
|
longDistanceSettings OBJECT IDENTIFIER ::= { advancedSettings 1}
|
|
|
|
wlg-aboard OBJECT IDENTIFIER ::= { productSpecific 1 }
|
|
|
|
|
|
alarmSettingsPower1Down OBJECT IDENTIFIER ::= { alarmSettings 2 }
|
|
alarmSettingsPower2Down OBJECT IDENTIFIER ::= { alarmSettings 3 }
|
|
alarmSettingsLan1Down OBJECT IDENTIFIER ::= { alarmSettings 4 }
|
|
alarmSettingsLan2Down OBJECT IDENTIFIER ::= { alarmSettings 5 }
|
|
alarmSettingsLan3Down OBJECT IDENTIFIER ::= { alarmSettings 6 }
|
|
alarmSettingsLan4Down OBJECT IDENTIFIER ::= { alarmSettings 7 }
|
|
alarmSettingsLan5Down OBJECT IDENTIFIER ::= { alarmSettings 8 }
|
|
alarmSettingsLan6Down OBJECT IDENTIFIER ::= { alarmSettings 9 }
|
|
alarmSettingsLan7Down OBJECT IDENTIFIER ::= { alarmSettings 10 }
|
|
alarmSettingsLan8Down OBJECT IDENTIFIER ::= { alarmSettings 11 }
|
|
alarmSettingsWLANDown OBJECT IDENTIFIER ::= { alarmSettings 12 }
|
|
--acksys group
|
|
acksysProductID OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wlg-link(1),
|
|
wlg-aboard-n(2),
|
|
wlg-link-v2(3),
|
|
wlg-aboard-n-v2(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Return the product Id code
|
|
"
|
|
::= { acksys 3 }
|
|
|
|
--network-product
|
|
|
|
--Wireless Interface group
|
|
settingInterfaceSsid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SSID (wireless network name)
|
|
"
|
|
::= { settings 1 }
|
|
|
|
settingInterfaceWifiMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bridge(1),
|
|
access-point(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select between MAX-ACCESS POINT and BRIDGE
|
|
"
|
|
::= { settings 2 }
|
|
|
|
settingInterfaceChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A wireless network uses specific channels to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clearest channel to help optimize the performance and coverage of your wireless network.(used in MAX-ACCESS POINT & AD-HOC BRIDGE modes)
|
|
"
|
|
::= { settings 3 }
|
|
|
|
settingInterface80211Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b-only(1),
|
|
g-only(2),
|
|
mixed-b-g(3),
|
|
a-only(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select IEEE 802.11x compatibility mode.
|
|
"
|
|
::= { settings 4 }
|
|
|
|
settingInterfaceSuper-a-g-Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
super-g-without-turbo(2),
|
|
super-g-with-static-turbo(3),
|
|
super-g-with-dynamic-turbo(4)
|
|
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter enables the SUPER A/G mode to reach the 108 Mbits/s speed
|
|
|
|
"
|
|
::= { settings 5 }
|
|
|
|
settingEnableRadio OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable / Disable wifi radio
|
|
"
|
|
::= { settings 6 }
|
|
|
|
settingTxPoxer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
high(1),
|
|
medium(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Set WIFI tx power
|
|
"
|
|
::= { settings 7 }
|
|
|
|
settingRegion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
israel(2),
|
|
usa(4),
|
|
hong-kong(5),
|
|
canada(6),
|
|
australia(7),
|
|
franceoutdoor(10),
|
|
europe(14),
|
|
japan(17),
|
|
singapore(18),
|
|
korea(20),
|
|
mexico(21),
|
|
indonesia(22),
|
|
china(23),
|
|
russia(27),
|
|
brazil(28),
|
|
chile(29),
|
|
thailand(30),
|
|
peru(31)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Set WIFI regulation domain
|
|
"
|
|
::= { settings 8 }
|
|
|
|
settingAntennaChoice OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
diversity(1),
|
|
main(2),
|
|
aux(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Set the antenna type
|
|
"
|
|
::= { settings 10 }
|
|
|
|
--Setting Transmission rate
|
|
settingTransmisionRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Set the transmission rate in Mbps
|
|
Automatic : -1
|
|
With SuperAG Mode : 108,96,72,48,36,24,18,12
|
|
Without SuperAG mode : 54,48,36,24,18,12,9,6
|
|
802.11b mode : 11,5.5,2,1
|
|
"
|
|
::= { settings 11 }
|
|
|
|
|
|
--Setting flag udap sans password
|
|
settingFlagUdapnopassword OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure LAN settings without password
|
|
"
|
|
::= { settings 12 }
|
|
--Setting filter in same net
|
|
settingFlagFiltersamenet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
different-subnet-filter(2),
|
|
custom-subnet-filter(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet filter settings:
|
|
(1) Disable the filter,
|
|
(2) Different subnet filter: drop all packets on the different subnet,
|
|
(3) Custom subnet filter: drop all packets on the custom subnet (You need to define IP and subnet mask of custom subnet.)
|
|
"
|
|
::= { settings 13 }
|
|
--Setting economy filter
|
|
settingFlagFilterframecosom OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting economy filter
|
|
"
|
|
::= { settings 14 }
|
|
|
|
--Setting DFS support
|
|
settingDFSsupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(1),
|
|
true(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting DFS support
|
|
"
|
|
::= { settings 15 }
|
|
settingFilterCustomIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Set IP address of custom subnet.
|
|
|
|
When settingFlagFiltersamenet is set on '(3) Custom subnet filter', you need to define custom subnet.
|
|
All packets on the custom subnet will be dropped.
|
|
"
|
|
::= { settings 16 }
|
|
settingFilterCustomSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set subnet mask of custom subnet.
|
|
|
|
When settingFlagFiltersamenet is set on '(3) Custom subnet filter', you need to define custom subnet.
|
|
All packets on the custom subnet will be dropped.
|
|
"
|
|
::= { settings 17 }
|
|
-- Advanced setting group
|
|
enable802-11d OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable / disable the 802.11d.
|
|
"
|
|
::= { advancedSettings 2 }
|
|
enableIsolateSTA OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable / disable the isolating access point.
|
|
"
|
|
::= { advancedSettings 3 }
|
|
|
|
-- long distance settings groups
|
|
enableLongDistance OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable / disable distance parameter.
|
|
"
|
|
::= { longDistanceSettings 1 }
|
|
|
|
distanceAntennaMeter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Set the distance between antenna in meter.
|
|
"
|
|
::= { longDistanceSettings 2 }
|
|
|
|
distanceSlotTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { longDistanceSettings 3 }
|
|
|
|
distanceAckTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { longDistanceSettings 4 }
|
|
|
|
distanceCtsTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { longDistanceSettings 5 }
|
|
|
|
--Setting security group
|
|
securityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
wep(2),
|
|
wpa-wpa2-psk(3),
|
|
wpa-wpa2(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Set the security mode
|
|
"
|
|
::= { securitySettings 1 }
|
|
|
|
--WEP group
|
|
securityModeWepKeyLen OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the WEP key len (64 bits or 128 bits)
|
|
"
|
|
::= { securityWEP 1 }
|
|
|
|
securityModeWepKey-1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..26))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key 1 in hexadecimal format
|
|
"
|
|
::= { securityWEP 2 }
|
|
|
|
securityModeWepKey-2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..26))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key 2 in hexadecimal format
|
|
"
|
|
::= { securityWEP 3 }
|
|
|
|
securityModeWepKey-3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..26))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key 3 in hexadecimal format
|
|
"
|
|
::= { securityWEP 4 }
|
|
|
|
securityModeWepKey-4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..26))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key 4 in hexadecimal format
|
|
"
|
|
::= { securityWEP 5 }
|
|
|
|
securityModeDefaultWepKey OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the wep key used
|
|
"
|
|
::= { securityWEP 6 }
|
|
|
|
securityModeWepAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open(1),
|
|
shared(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set WEP Authentication
|
|
"
|
|
::= { securityWEP 7 }
|
|
|
|
--WPA/WPA2-PSK group
|
|
|
|
securityModeWpaMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wpa(1),
|
|
wpa2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the wpa mode
|
|
"
|
|
::= { securityWPA-WPA2 4 }
|
|
|
|
securityModeWpaCipherType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tkip(1),
|
|
aes(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"select the cipher type
|
|
"
|
|
::= { securityWPA-WPA2 5 }
|
|
|
|
securityModeWpaKeyUpdateInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityWPA-WPA2 6 }
|
|
|
|
--Pre-shared key group
|
|
securityModeWpaPresharedKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityPresharedKey 1 }
|
|
|
|
-- radius AP
|
|
securityModeWPARadiusAPAuthenticationTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAP 1 }
|
|
|
|
securityModeWPARadiusAPIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAP 2 }
|
|
|
|
securityModeWPARadiusAPPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAP 3 }
|
|
|
|
securityModeWPARadiusAPSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAP 4 }
|
|
|
|
securityModeWPARadiusAPMacAddressAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAP 5 }
|
|
--Obsolete OIDs
|
|
securityModeWPARadiusAuthenticationTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadius 1 }
|
|
|
|
securityModeWPARadiusIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadius 2 }
|
|
|
|
securityModeWPARadiusPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadius 3 }
|
|
|
|
securityModeWPARadiusSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadius 4 }
|
|
|
|
securityModeWPARadiusMacAddressAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadius 5 }
|
|
--End of Obsolete OIDs
|
|
|
|
-- backup radius
|
|
securityModeWPABackupRadiusAPIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAPBackup 1 }
|
|
|
|
securityModeWPARadiusBackupAPPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAPBackup 2 }
|
|
|
|
securityModeWPARadiusBackupAPSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAPBackup 3 }
|
|
|
|
securityModeWPABackupRadiusAPMacAddressAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusAPBackup 4 }
|
|
|
|
--Obsolete OIDs
|
|
securityModeWPABackupRadiusIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityBackupRadius 1 }
|
|
|
|
securityModeWPARadiusBackupPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityBackupRadius 2 }
|
|
|
|
securityModeWPARadiusBackupSecret OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityBackupRadius 3 }
|
|
|
|
securityModeWPABackupRadiusMacAddressAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityBackupRadius 4 }
|
|
--End of Obsolete OIDs
|
|
|
|
-- radius Bridge
|
|
securityModeWPARadiusLogin OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusBridge 1 }
|
|
|
|
securityModeWPARadiusPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the group key interval
|
|
"
|
|
::= { securityRadiusBridge 2 }
|
|
|
|
|
|
--Access point group
|
|
apClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ApClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Significant only in MAX-ACCESS POINT mode. This table shows information about connected clients."
|
|
::= { access-point-mode 1 }
|
|
|
|
apAutomaticChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable / disable the automatic channel select
|
|
"
|
|
::= { access-point-mode 2}
|
|
|
|
apClientCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" count the number of entries in ApClientEntry
|
|
"
|
|
::= { access-point-mode 3}
|
|
|
|
apClientEntry OBJECT-TYPE
|
|
SYNTAX ApClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows information about the connected client.
|
|
"
|
|
INDEX { clientMacAddr }
|
|
::= { apClientTable 1 }
|
|
|
|
ApClientEntry ::=
|
|
SEQUENCE {
|
|
clientMacAddr
|
|
PhysAddress,
|
|
client80211Mode
|
|
INTEGER,
|
|
clientTxRate
|
|
INTEGER ,
|
|
clientRssiPercent
|
|
Gauge32
|
|
}
|
|
|
|
clientMacAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the client connected to the MAX-ACCESS POINT."
|
|
::= { apClientEntry 1 }
|
|
|
|
client80211Mode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b-only(1),
|
|
g-only(2),
|
|
mixed-b-g(3),
|
|
a-only(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show client's IEEE 802.11x compatibility mode."
|
|
::= { apClientEntry 2 }
|
|
|
|
clientTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Client's communication speed in bits per second"
|
|
::= { apClientEntry 3 }
|
|
|
|
clientRssiPercent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Client's RSSI (percent)"
|
|
::= { apClientEntry 4}
|
|
|
|
settingSSIDVisibility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
visible(2),
|
|
invisible(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable or Disable SSID Visibility
|
|
"
|
|
::= { access-point-mode 6}
|
|
|
|
enableSTP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable / disable STP protocol.
|
|
"
|
|
::= { access-point-mode 7 }
|
|
|
|
enableLanTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable / disable LAN timeout.
|
|
ACCESS POINT can be configured to auto-disconnect the radio when the LAN is disconnected from the equipment.
|
|
|
|
"
|
|
::= { lanTimeOutSettings 1 }
|
|
|
|
lanTimeoutIPSurvey OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the IP address where the probe was be sent.
|
|
|
|
"
|
|
::= { lanTimeOutSettings 2 }
|
|
|
|
lanTimeoutMaxProbe OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the number of probe without response necessairy to disconnect the radio.
|
|
|
|
"
|
|
::= { lanTimeOutSettings 3 }
|
|
|
|
lanTimeoutProbeTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the probe response waiting time in seconds.
|
|
|
|
"
|
|
::= { lanTimeOutSettings 4 }
|
|
|
|
lanTimeoutProbeInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Define the times in seconds between each probes.
|
|
|
|
"
|
|
::= { lanTimeOutSettings 5 }
|
|
|
|
|
|
------------------------
|
|
--AP Filtering
|
|
|
|
apClientFilteringEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable / Disable Client Filtering.
|
|
"
|
|
::= { apClientFiltering 1 }
|
|
|
|
apClientFilteringMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allow(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select Client Filtering Mode (allow/Deny)
|
|
"
|
|
::= { apClientFiltering 2 }
|
|
|
|
apClientWirelessFiltering OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Wireless client filtering
|
|
"
|
|
::= { apClientFiltering 3 }
|
|
|
|
apClientWiredFiltering OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Wireless client filtering
|
|
"
|
|
::= { apClientFiltering 4 }
|
|
|
|
apClientFilteringMACAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
MAC address field
|
|
"
|
|
::= { apClientFiltering 5 }
|
|
|
|
apClientFilteringName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name Field
|
|
"
|
|
::= { apClientFiltering 6}
|
|
|
|
apClientFilteringSave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "write 1 to save the rule
|
|
"
|
|
::= { apClientFiltering 7 }
|
|
|
|
apClientFilteringDelete OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, delete the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { apClientFiltering 8 }
|
|
|
|
apClientFilteringEnableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, enable the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { apClientFiltering 9 }
|
|
|
|
apClientFilteringDisableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, disable the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { apClientFiltering 10 }
|
|
|
|
apClientFilteringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ApClientFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Significant only in MAX-ACCESS POINT mode. This table shows information AP bridge filtering rules list."
|
|
::= { apClientFiltering 11 }
|
|
|
|
|
|
apClientFilteringEntry OBJECT-TYPE
|
|
SYNTAX ApClientFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows information of the rule.
|
|
"
|
|
INDEX { apClientFilteringListId }
|
|
::= { apClientFilteringTable 1 }
|
|
|
|
ApClientFilteringEntry ::=
|
|
SEQUENCE {
|
|
apClientFilteringListId
|
|
INTEGER,
|
|
apClientFilteringListName
|
|
OCTET STRING,
|
|
apClientFilteringListMAC
|
|
PhysAddress,
|
|
apClientFilteringListEnable
|
|
INTEGER
|
|
}
|
|
|
|
apClientFilteringListId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rule index."
|
|
::= { apClientFilteringEntry 1 }
|
|
|
|
apClientFilteringListMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the client."
|
|
::= { apClientFilteringEntry 3 }
|
|
|
|
apClientFilteringListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show rule's name"
|
|
::= { apClientFilteringEntry 2 }
|
|
|
|
apClientFilteringListEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show if the rule is enabled or not"
|
|
::= { apClientFilteringEntry 4 }
|
|
|
|
|
|
|
|
--End AP Filtering
|
|
------------------------
|
|
|
|
------------------------
|
|
--WDS
|
|
apWDSEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or Disable WDS.
|
|
"
|
|
::= { wds 1 }
|
|
|
|
apWDSEnableSTP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or Disable STP when WDS is on
|
|
|
|
"
|
|
::= { wds 2 }
|
|
|
|
apWDSMAC1 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
First AP mac address
|
|
"
|
|
::= { wds 3 }
|
|
|
|
apWDSMAC2 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Second AP mac address
|
|
"
|
|
::= { wds 4 }
|
|
|
|
apWDSMAC3 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Third AP mac address
|
|
"
|
|
::= { wds 5 }
|
|
|
|
apWDSMAC4 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
fourth AP mac address
|
|
"
|
|
::= { wds 6 }
|
|
|
|
apWDSMAC5 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
fith AP mac address
|
|
"
|
|
::= { wds 7 }
|
|
|
|
apWDSMAC6 OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
sixth AP mac address
|
|
"
|
|
::= { wds 8 }
|
|
|
|
--bridge group
|
|
bridge-modeLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAX-ACCESS POINT's connection status.
|
|
"
|
|
::= { bridge-mode 1 }
|
|
|
|
bridge-modeMacAP OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
MAX-ACCESS POINT's MAC ADDRESS we are connected with.
|
|
"
|
|
::= { bridge-mode 2 }
|
|
|
|
bridge-modeRSSI OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
MAX-ACCESS POINT's connection RSSI.
|
|
"
|
|
::= { bridge-mode 3 }
|
|
|
|
bridge-modeRSSIdBm OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Connection's RSSI in dBm.
|
|
"
|
|
::= { bridge-mode 4 }
|
|
|
|
bridge-modeRSSIPercent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Connection's RSSI in percent.
|
|
"
|
|
::= { bridge-mode 5}
|
|
|
|
bridge-modeCurrentTxRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Current communication speed in bits per second.
|
|
"
|
|
::= { bridge-mode 6}
|
|
|
|
bridge-WirelessMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
infrastructure(1),
|
|
ad-hoc(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Select the Wireless mode. Infrastructure mode require an access point.
|
|
"
|
|
::= { bridge-mode 7}
|
|
|
|
--*********************
|
|
|
|
--********************
|
|
-- bridge
|
|
|
|
bridgeAPFilteringEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or Disable AP Filtering.
|
|
"
|
|
::= { bridgeAPFiltering 1 }
|
|
|
|
bridgeAPFilteringMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allow(1),
|
|
deny(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Select AP Filtering Mode (allow/Deny)
|
|
"
|
|
::= { bridgeAPFiltering 2 }
|
|
|
|
bridgeAPFilteringMACAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
MAC address field
|
|
"
|
|
::= { bridgeAPFiltering 3 }
|
|
|
|
bridgeAPFilteringName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name Field
|
|
"
|
|
::= { bridgeAPFiltering 4 }
|
|
|
|
bridgeAPFilteringSave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "write 1 to save the rule
|
|
"
|
|
::= { bridgeAPFiltering 5 }
|
|
|
|
bridgeAPFilteringDelete OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, delete the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { bridgeAPFiltering 6 }
|
|
|
|
bridgeAPFilteringEnableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, enable the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { bridgeAPFiltering 7 }
|
|
|
|
bridgeAPFilteringDisableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "when writed, disable the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { bridgeAPFiltering 8 }
|
|
|
|
|
|
bridgeAPFilteringTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BridgeAPFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Significant only in MAX-ACCESS POINT mode. This table shows information bridge AP filtering rules list."
|
|
::= { bridgeAPFiltering 9 }
|
|
|
|
bridgeAPFilteringEntry OBJECT-TYPE
|
|
SYNTAX BridgeAPFilteringEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows information of the rule.
|
|
"
|
|
INDEX { bridgeAPFilteringListId }
|
|
::= { bridgeAPFilteringTable 1 }
|
|
|
|
BridgeAPFilteringEntry ::=
|
|
SEQUENCE {
|
|
bridgeAPFilteringListId
|
|
INTEGER,
|
|
bridgeAPFilteringListName
|
|
OCTET STRING,
|
|
bridgeAPFilteringListMAC
|
|
PhysAddress,
|
|
bridgeAPFilteringListEnable
|
|
INTEGER
|
|
}
|
|
|
|
bridgeAPFilteringListId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rule index."
|
|
::= { bridgeAPFilteringEntry 1 }
|
|
|
|
bridgeAPFilteringListMAC OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the client."
|
|
::= { bridgeAPFilteringEntry 3 }
|
|
|
|
bridgeAPFilteringListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show rule's name"
|
|
::= { bridgeAPFilteringEntry 2 }
|
|
|
|
bridgeAPFilteringListEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Show if a rule is enabled or not.
|
|
"
|
|
::= { bridgeAPFilteringEntry 4 }
|
|
|
|
bridgeChannelList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A wireless network uses specific channels in the 2.4GHz or 5GHz wireless spectrum to handle communication between clients. Some channels in your area may have interference from other electronic devices. Your wireless bridge will use the channel that is used by the access point it will associate with. But you can select here your channel preference to help optimize the performance and coverage of your wireless network. If you used the roaming, Acksys recommend to used only one channel for better bandwith.
|
|
"
|
|
::= { bridge-mode 10 }
|
|
|
|
--roaming setting
|
|
bridgeRoamingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Roaming enables WiFi clients to roam among AP when WiFi RSSI of the current AP becomes weak. This radio button enables/disables the roaming capabilities of the bridge.
|
|
"
|
|
::={bridgeRoaming 2}
|
|
|
|
bridgeRoamingRSSIThreshold-dBm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Allows to configure the RSSI roaming threshold (in dBm, or percent) from which the roaming algorithm (to find a better AP) will start. AP changing will only be effective if the current RSSI is lower than that threshold, and if a new AP with a better RSSI has been detected.
|
|
"
|
|
::= {bridgeRoaming 3}
|
|
|
|
bridgeRoamingRSSIThreshold-percent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Allows to configure the RSSI roaming threshold (in dBm, or percent) from which the roaming algorithm (to find a better AP) will start. AP changing will only be effective if the current RSSI is lower than that threshold, and if a new AP with a better RSSI has been detected.
|
|
"
|
|
::= {bridgeRoaming 4}
|
|
|
|
bridgeRoamingAdvancedScanThreshold-dbm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allows to configure the RSSI scan threshold (in dBm, or in percent) from which the access point active scan will start. The access point active scan process looking on each valid channel the access point where it will be possible to roam.
|
|
"
|
|
::= {bridgeRoamingAdvanced 1}
|
|
|
|
bridgeRoamingAdvancedScanThreshold-percent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allows to configure the RSSI scan threshold (in dBm, or in percent) from which the access point active scan will start. The access point active scan process looking on each valid channel the access point where it will be possible to roam.
|
|
"
|
|
::= {bridgeRoamingAdvanced 2}
|
|
|
|
bridgeRoamingAdvancedScanPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allow to configure the time between two scan.
|
|
Reduce this time increase the Access Point discover, but decrease the bandwith if you used more one channel.
|
|
"
|
|
::= {bridgeRoamingAdvanced 3}
|
|
|
|
bridgeRoamingAdvancedScanDuration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Allow to configure the duration while the bridge waiting the Access Point answer.
|
|
Reduce this duration increase the Bandwith when you used more one channel, but decrase the Access Point discover.
|
|
"
|
|
::= {bridgeRoamingAdvanced 4}
|
|
|
|
bridgeRoamingAdvancedAPLossDetection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If nothing is received from the AP during a certain amount of time, it will be considered unreachable.
|
|
This amount of time is computed as:
|
|
'AP timeout' = 'AP loss detection' x 'beacon interval'.
|
|
The recommended value for 'AP loss detection' is 5.
|
|
The recommended value for 'Beacon interval' (which should be configured in your AP) is 50 ms.
|
|
If the AP timeout is set too low, it may decrease the bandwidth and roaming performance.
|
|
|
|
"
|
|
::= {bridgeRoamingAdvanced 5}
|
|
|
|
-- End bridge filter
|
|
--***********************
|
|
|
|
--Bridge status scan
|
|
bridgeWileressScanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BridgeWirelessScanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Significant only in MAX-ACCESS POINT mode. This table shows information AP bridge filtering rules list."
|
|
::= { bridgeWirelessScan 1 }
|
|
|
|
|
|
bridgeWirelessScanEntry OBJECT-TYPE
|
|
SYNTAX BridgeWirelessScanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows information of the rule.
|
|
"
|
|
INDEX { apClientFilteringListId }
|
|
::= { bridgeWileressScanTable 1 }
|
|
|
|
BridgeWirelessScanEntry ::=
|
|
SEQUENCE {
|
|
bridgeWirelessScanAPMac
|
|
PhysAddress,
|
|
bridgeWirelessScanSSID
|
|
DisplayString,
|
|
bridgeWirelessScanChannel
|
|
INTEGER,
|
|
bridgeWirelessScanMode
|
|
INTEGER,
|
|
bridgeWirelessScanSecurity
|
|
INTEGER,
|
|
bridgeWirelessScanRssi
|
|
INTEGER
|
|
}
|
|
|
|
bridgeWirelessScanAPMac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC address of the access point."
|
|
::= { bridgeWirelessScanEntry 1 }
|
|
|
|
bridgeWirelessScanSSID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..33))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bridgeWirelessScanEntry 2 }
|
|
|
|
bridgeWirelessScanChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bridgeWirelessScanEntry 3 }
|
|
|
|
|
|
bridgeWirelessScanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b-only(1),
|
|
g-only(2),
|
|
mixed-b-g(3),
|
|
a-only(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show AP's IEEE 802.11x compatibility mode."
|
|
::= { bridgeWirelessScanEntry 4 }
|
|
|
|
bridgeWirelessScanSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
wep(1),
|
|
wpa(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bridgeWirelessScanEntry 5 }
|
|
|
|
bridgeWirelessScanRssi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { bridgeWirelessScanEntry 6 }
|
|
|
|
|
|
|
|
--end bridge status scan
|
|
|
|
--BrigeNAT
|
|
brigeNATStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / disable NAT
|
|
"
|
|
::= { bridgeNAT 1 }
|
|
|
|
brigeNATEnablePing OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / disable ping response from WAN
|
|
"
|
|
::= { bridgeNAT 2 }
|
|
|
|
brigeNATEnableProductWebServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / disable the internal web server from WAN
|
|
"
|
|
::= { bridgeNAT 3 }
|
|
|
|
brigeNATInternalWebServerPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TCP port used by internal web server from WAN
|
|
"
|
|
::= { bridgeNAT 4 }
|
|
|
|
brigeNATEnableProductSnmpServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable / disable the internal snmp server from WAN
|
|
"
|
|
::= { bridgeNAT 5 }
|
|
|
|
brigeNATInternalWebSnmpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TCP port used by internal snmp server from WAN
|
|
"
|
|
::= { bridgeNAT 6 }
|
|
|
|
|
|
brigeNATWanIpAddrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {static(1),dhcp(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip address mode on wan side
|
|
"
|
|
::= { bridgeNAT 7 }
|
|
|
|
brigeNATWanIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static Ip address on wan side
|
|
"
|
|
::= { bridgeNAT 8 }
|
|
|
|
brigeNATWanSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet mask on wan side
|
|
"
|
|
::= { bridgeNAT 9 }
|
|
|
|
brigeNATWanGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Gateway ip address on wan side
|
|
"
|
|
::= { bridgeNAT 10 }
|
|
|
|
bridgeNatPortForwardingName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show rule's name
|
|
"
|
|
::= { bridgeNatPortForwarding 2 }
|
|
|
|
bridgeNatPortForwardingIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show ipaddress to forward data
|
|
"
|
|
::= { bridgeNatPortForwarding 3 }
|
|
|
|
bridgeNatPortForwardingPublicTcpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show public TCP port
|
|
"
|
|
::= { bridgeNatPortForwarding 4 }
|
|
|
|
bridgeNatPortForwardingPrivateTcpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show private TCP port
|
|
"
|
|
::= { bridgeNatPortForwarding 5 }
|
|
|
|
bridgeNatPortForwardingPublicUdpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show public TCP port
|
|
"
|
|
::= { bridgeNatPortForwarding 6 }
|
|
|
|
bridgeNatPortForwardingPrivateUdpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show private TCP port
|
|
"
|
|
::= { bridgeNatPortForwarding 7 }
|
|
|
|
bridgeNatPortForwardingEnableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when writed, enable the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { bridgeNatPortForwarding 8 }
|
|
|
|
bridgeNatPortForwardingDisableRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when writed, disable the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { bridgeNatPortForwarding 9 }
|
|
|
|
bridgeNatPortForwardingSaveRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when writed, save the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { bridgeNatPortForwarding 10 }
|
|
|
|
bridgeNatPortForwardingDeleteRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when writed, delete the rule which is
|
|
indexed by the written value
|
|
"
|
|
::= { bridgeNatPortForwarding 11 }
|
|
|
|
bridgeNatPortForwardingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BridgeNatPortForwardingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This table show information on port forwading rules
|
|
"
|
|
::= { bridgeNatPortForwarding 1 }
|
|
|
|
bridgeNatPortForwardingEntry OBJECT-TYPE
|
|
SYNTAX BridgeNatPortForwardingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"shows information of rule.
|
|
"
|
|
INDEX {bridgeNatPortForwardingListId}
|
|
::= {bridgeNatPortForwardingTable 1}
|
|
|
|
BridgeNatPortForwardingEntry ::=
|
|
SEQUENCE {
|
|
bridgeNatPortForwardingListId
|
|
INTEGER,
|
|
bridgeNatPortForwardingListEnable
|
|
INTEGER,
|
|
bridgeNatPortForwardingListName
|
|
OCTET STRING,
|
|
bridgeNatPortForwardingListIpAddr
|
|
IpAddress,
|
|
bridgeNatPortForwardingListPublicTcpPort
|
|
OCTET STRING,
|
|
bridgeNatPortForwardingListPrivateTcpPort
|
|
OCTET STRING,
|
|
bridgeNatPortForwardingListPublicUdpPort
|
|
OCTET STRING,
|
|
bridgeNatPortForwardingListPrivateUdpPort
|
|
OCTET STRING
|
|
}
|
|
|
|
bridgeNatPortForwardingListId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rule index"
|
|
::= { bridgeNatPortForwardingEntry 1 }
|
|
|
|
bridgeNatPortForwardingListName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show rule's name"
|
|
::= { bridgeNatPortForwardingEntry 2 }
|
|
|
|
bridgeNatPortForwardingListIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show ipaddress to forward data"
|
|
::= { bridgeNatPortForwardingEntry 3 }
|
|
|
|
bridgeNatPortForwardingListPublicTcpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show public TCP port"
|
|
::= { bridgeNatPortForwardingEntry 4 }
|
|
|
|
bridgeNatPortForwardingListPrivateTcpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show private TCP port"
|
|
::= { bridgeNatPortForwardingEntry 5 }
|
|
|
|
bridgeNatPortForwardingListPublicUdpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show public TCP port"
|
|
::= { bridgeNatPortForwardingEntry 6 }
|
|
|
|
bridgeNatPortForwardingListPrivateUdpPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show private TCP port"
|
|
::= { bridgeNatPortForwardingEntry 7 }
|
|
|
|
bridgeNatPortForwardingListEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rule state"
|
|
::= { bridgeNatPortForwardingEntry 8 }
|
|
|
|
--end bridgeNAT
|
|
--*********************
|
|
|
|
-- Administration group
|
|
|
|
adminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {reset(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Writing 1 resets the product. This must be done after each configuration change.
|
|
"
|
|
::= { administration 1}
|
|
|
|
adminResetFactory OBJECT-TYPE
|
|
SYNTAX INTEGER {resetfactory(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "
|
|
Writing 1 resets the product to the factory settings.
|
|
"
|
|
::= { administration 2}
|
|
|
|
adminEnableWebServer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable or Disable internal webserver.
|
|
"
|
|
::= { administration 3}
|
|
|
|
adminAutoSave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable or Disable the automatic change saving. When this function is disable, the modification is not save automaticaly after change and certainly OID is applied imediatly.
|
|
|
|
"
|
|
::= { administration 4}
|
|
|
|
adminSave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
saveNotRequire(3),
|
|
saveRequire(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Write 1 to save the modification in flash. Read this OID to know if a save is require.
|
|
"
|
|
::= { administration 5}
|
|
|
|
|
|
-- os-stat group
|
|
os-statFreeHeap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of memory currently available, measured in bytes.
|
|
"
|
|
::= { os-stat 1 }
|
|
|
|
os-statTotalHeap OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total size of the heap, measured in bytes.
|
|
"
|
|
::= { os-stat 2 }
|
|
|
|
os-statHeapLowWater OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low water mark for the heap. Writing any value this variable will always
|
|
reset the low water to the total heap size.
|
|
"
|
|
::= { os-stat 3 }
|
|
|
|
os-statNetpageFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of netpages currently available, measured in bytes.
|
|
"
|
|
::= { os-stat 4 }
|
|
|
|
os-statNetpageLowWater OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low water mark for the netpage.
|
|
"
|
|
::= { os-stat 5 }
|
|
|
|
|
|
-- wlg-aboard group
|
|
wlg-aboard-PW1-state OBJECT-TYPE
|
|
SYNTAX INTEGER {powerOff(1), powerOn(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Power 1 state
|
|
"
|
|
::= { wlg-aboard 1 }
|
|
|
|
wlg-aboard-PW2-state OBJECT-TYPE
|
|
SYNTAX INTEGER {powerOff(1), powerOn(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Power 2 state
|
|
"
|
|
::= { wlg-aboard 2 }
|
|
|
|
-- lanInterface group
|
|
lanInterfaceIpAddrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {static(1),dhcp(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static or DHCP Ip settings
|
|
"
|
|
|
|
::= { lanInterface 1 }
|
|
|
|
lanInterfaceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Product IP address
|
|
"
|
|
::= { lanInterface 2 }
|
|
|
|
lanInterfaceSubNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network mask
|
|
"
|
|
::= { lanInterface 3 }
|
|
|
|
lanInterfaceGatewayIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP gateway
|
|
"
|
|
::= { lanInterface 4 }
|
|
|
|
lanInterfaceHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adresse IP de la gateway
|
|
"
|
|
::= { lanInterface 5 }
|
|
|
|
lanInterfaceLocalDomainName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..33))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Adresse IP de la gateway
|
|
"
|
|
::= { lanInterface 6 }
|
|
|
|
-- c-key-management
|
|
ckeyManagementCopySettingTo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Write 1 to copy the current settings to the C-KEY. After this action, all previous data in the C-KEY are lost.
|
|
|
|
"
|
|
::= { c-key-management 1 }
|
|
|
|
ckeyManagementCopySettingFrom OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Write 1 to copy the product settings from the C-KEY. After this action, the product has C-KEY settings. Reboot your device to apply the new settings.
|
|
|
|
"
|
|
::= { c-key-management 2 }
|
|
|
|
-- alarmSettings
|
|
alarmSettingsTest OBJECT-TYPE
|
|
SYNTAX INTEGER {set(1),clear(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Allow to get and set the Alarm output status.
|
|
|
|
"
|
|
::= { alarmSettings 1 }
|
|
|
|
alarmSettingsPower1DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsPower1Down 1 }
|
|
|
|
alarmSettingsPower1DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsPower1Down 2 }
|
|
|
|
alarmSettingsPower1DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsPower1Down 3 }
|
|
|
|
alarmSettingsPower2DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsPower2Down 1 }
|
|
|
|
alarmSettingsPower2DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsPower2Down 2 }
|
|
|
|
alarmSettingsPower2DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsPower2Down 3 }
|
|
|
|
alarmSettingsLan1DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan1Down 1 }
|
|
|
|
alarmSettingsLan1DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan1Down 2 }
|
|
|
|
alarmSettingsLan1DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsLan1Down 3 }
|
|
|
|
alarmSettingsLan2DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan2Down 1 }
|
|
|
|
alarmSettingsLan2DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan2Down 2 }
|
|
|
|
alarmSettingsLan2DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsLan2Down 3 }
|
|
|
|
alarmSettingsLan3DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan3Down 1 }
|
|
|
|
alarmSettingsLan3DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan3Down 2 }
|
|
|
|
alarmSettingsLan3DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsLan3Down 3 }
|
|
|
|
alarmSettingsLan4DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan4Down 1 }
|
|
|
|
alarmSettingsLan4DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan4Down 2 }
|
|
|
|
alarmSettingsLan4DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsLan4Down 3 }
|
|
|
|
alarmSettingsLan5DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan5Down 1 }
|
|
|
|
alarmSettingsLan5DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan5Down 2 }
|
|
|
|
alarmSettingsLan5DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsLan5Down 3 }
|
|
|
|
alarmSettingsLan6DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan6Down 1 }
|
|
|
|
alarmSettingsLan6DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan6Down 2 }
|
|
|
|
alarmSettingsLan6DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsLan6Down 3 }
|
|
|
|
alarmSettingsLan7DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan7Down 1 }
|
|
|
|
alarmSettingsLan7DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan7Down 2 }
|
|
|
|
alarmSettingsLan7DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsLan7Down 3}
|
|
|
|
alarmSettingsLan8DownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan8Down 1 }
|
|
|
|
alarmSettingsLan8DownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsLan8Down 2 }
|
|
|
|
alarmSettingsLan8DownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsLan8Down 3 }
|
|
|
|
alarmSettingsWLANDownEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsWLANDown 1 }
|
|
|
|
alarmSettingsWLANDownEnableAutomaticReset OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
"
|
|
::= { alarmSettingsWLANDown 2 }
|
|
|
|
alarmSettingsWLANDownStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(1),enable(2),ack(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Read to know the alarm source status (disable / enable )
|
|
Write 3 to acknowledge the alarm source.
|
|
|
|
"
|
|
::= { alarmSettingsWLANDown 3 }
|
|
|
|
-- powerStatus
|
|
powerStatus-PW1-state OBJECT-TYPE
|
|
SYNTAX INTEGER {powerOff(1), powerOn(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power 1 state
|
|
"
|
|
::= { powerStatus 1 }
|
|
|
|
powerStatus-PW2-state OBJECT-TYPE
|
|
SYNTAX INTEGER {powerOff(1), powerOn(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power 2 state
|
|
"
|
|
::= { powerStatus 2 }
|
|
--***********************
|
|
-- Serial interface
|
|
|
|
-- ------------------------
|
|
-- +++ Serial format +++
|
|
|
|
END
|