1196 lines
40 KiB
Plaintext
1196 lines
40 KiB
Plaintext
--
|
|
-- Accedian Enterprise Specific MIB
|
|
--
|
|
-- Copyright (c) 2005-2016, Accedian Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
--
|
|
|
|
|
|
ACD-ERP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION, MacAddress
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
acdMibs
|
|
FROM ACCEDIAN-SMI;
|
|
|
|
acdErp MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "201609230100Z"
|
|
ORGANIZATION "Accedian Networks, Inc."
|
|
CONTACT-INFO
|
|
"Accedian Technical Assistance Center
|
|
Accedian Networks, Inc.
|
|
2351 Alfred-Nobel blvd., Suite N-410
|
|
Saint-Laurent, Quebec Canada H4S 2A9
|
|
E-mail: support@accedian.com"
|
|
DESCRIPTION
|
|
"The ERP database for this Accedian Networks device."
|
|
|
|
REVISION "201609230100Z" -- 23 SEP 2016
|
|
DESCRIPTION
|
|
"Remove AcdErpVlanType out of MIB file."
|
|
|
|
REVISION "201201110100Z" -- 11 JAN 2012
|
|
DESCRIPTION
|
|
"Initial version of MIB module ACD-ERP-MIB."
|
|
|
|
::= { acdMibs 15 }
|
|
|
|
acdErpMIBObjects OBJECT IDENTIFIER ::= { acdErp 0 }
|
|
acdErpConformance OBJECT IDENTIFIER ::= { acdErp 1 }
|
|
|
|
acdErpConfig OBJECT IDENTIFIER ::= { acdErpMIBObjects 1 }
|
|
acdErpCounter OBJECT IDENTIFIER ::= { acdErpMIBObjects 2 }
|
|
acdErpStatus OBJECT IDENTIFIER ::= { acdErpMIBObjects 3 }
|
|
acdErpVlanFdb OBJECT IDENTIFIER ::= { acdErpMIBObjects 4 }
|
|
|
|
---------------------------------------------------------------------------
|
|
|
|
-- Textual conventions
|
|
---------------------------------------------------------------------------
|
|
|
|
AcdErpPortStateType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the port's forwarding."
|
|
SYNTAX INTEGER {
|
|
forwarding(0),
|
|
blocked(1)
|
|
}
|
|
|
|
AcdErpStateType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the ERP instance."
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
prot(2),
|
|
ms(3),
|
|
fs(4),
|
|
pending(5)
|
|
}
|
|
|
|
AcdErpPortStatusType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the port's signal."
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
sd(2),
|
|
sf(3)
|
|
}
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The Erp configuration table
|
|
-- This table contains all Service entry configurations.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdErpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdErpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all instance of ERP of this unit."
|
|
::= { acdErpConfig 1 }
|
|
|
|
acdErpConfigEntry OBJECT-TYPE
|
|
SYNTAX AcdErpConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all settings for an instance."
|
|
INDEX { acdErpIndex }
|
|
::= { acdErpConfigTable 1 }
|
|
|
|
AcdErpConfigEntry ::= SEQUENCE {
|
|
acdErpIndex Unsigned32,
|
|
acdErpConfigRowStatus RowStatus,
|
|
acdErpConfigName DisplayString,
|
|
acdErpConfigRPLRole DisplayString,
|
|
acdErpConfigRPLPort Unsigned32,
|
|
acdErpConfigHoldOffTimer Unsigned32,
|
|
acdErpConfigRevertive TruthValue,
|
|
acdErpConfigGuardTimer Unsigned32,
|
|
acdErpConfigWTRTimer Unsigned32,
|
|
acdErpConfigMDLevel Unsigned32,
|
|
acdErpConfigAPSVid Unsigned32,
|
|
acdErpConfigVids0to1023 OCTET STRING,
|
|
acdErpConfigVids1024to2047 OCTET STRING,
|
|
acdErpConfigVids2048to3071 OCTET STRING,
|
|
acdErpConfigVids3072to4095 OCTET STRING,
|
|
acdErpConfigLAGPort DisplayString,
|
|
acdErpConfigMep0Idx Unsigned32,
|
|
acdErpConfigMep1Idx Unsigned32
|
|
}
|
|
|
|
acdErpIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each instance."
|
|
::= { acdErpConfigEntry 1 }
|
|
|
|
acdErpConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All columns must have a valid value before a row can be activated. To
|
|
create a new Service you shall provide a unique name for an empty
|
|
row with the RowStatus set to Create and Go."
|
|
::= { acdErpConfigEntry 2 }
|
|
|
|
acdErpConfigName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique name used to identify the instance"
|
|
::= { acdErpConfigEntry 3 }
|
|
|
|
acdErpConfigRPLRole OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RPL role (Owner, Neighbor or None)."
|
|
::= { acdErpConfigEntry 4 }
|
|
|
|
acdErpConfigRPLPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 .. 1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the port used as RPL."
|
|
DEFVAL { 0 }
|
|
::= { acdErpConfigEntry 5 }
|
|
|
|
acdErpConfigHoldOffTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 .. 10000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hold off timer duration in ms."
|
|
::= { acdErpConfigEntry 6 }
|
|
|
|
acdErpConfigRevertive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates if the ERP is in revertive state."
|
|
DEFVAL { 1 }
|
|
::= { acdErpConfigEntry 7 }
|
|
|
|
acdErpConfigGuardTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 .. 2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The guard timer duration in ms."
|
|
DEFVAL { 500 }
|
|
::= { acdErpConfigEntry 8 }
|
|
|
|
acdErpConfigWTRTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 .. 2000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The WTR timer duration in minutes."
|
|
DEFVAL { 5 }
|
|
::= { acdErpConfigEntry 9 }
|
|
|
|
acdErpConfigMDLevel OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 .. 7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maintenance domain level."
|
|
DEFVAL { 0 }
|
|
::= { acdErpConfigEntry 10 }
|
|
|
|
acdErpConfigAPSVid OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 .. 4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The APS VID."
|
|
::= { acdErpConfigEntry 11 }
|
|
|
|
acdErpConfigVids0to1023 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpConfigEntry 12 }
|
|
|
|
acdErpConfigVids1024to2047 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpConfigEntry 13 }
|
|
|
|
acdErpConfigVids2048to3071 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpConfigEntry 14 }
|
|
|
|
acdErpConfigVids3072to4095 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpConfigEntry 15 }
|
|
|
|
|
|
acdErpConfigLAGPort OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The LAG port name"
|
|
::= { acdErpConfigEntry 16 }
|
|
|
|
acdErpConfigMep0Idx OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 .. 1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP0 port index."
|
|
::= { acdErpConfigEntry 17 }
|
|
|
|
acdErpConfigMep1Idx OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0 .. 1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP1 port index."
|
|
::= { acdErpConfigEntry 18 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The instance counters table
|
|
-- This table contains all ERP counters.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdErpCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdErpCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all instance of ERP of this unit."
|
|
::= { acdErpCounter 1 }
|
|
|
|
acdErpCounterEntry OBJECT-TYPE
|
|
SYNTAX AcdErpCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all counters for an instance."
|
|
INDEX { acdErpCounterIndex }
|
|
::= { acdErpCounterTable 1 }
|
|
|
|
AcdErpCounterEntry ::= SEQUENCE {
|
|
acdErpCounterIndex Unsigned32,
|
|
acdErpCounterPort0LocalClear Unsigned32,
|
|
acdErpCounterPort0LocalFs Unsigned32,
|
|
acdErpCounterPort0LocalSf Unsigned32,
|
|
acdErpCounterPort0LocalMs Unsigned32,
|
|
acdErpCounterPort0RxAps Unsigned32,
|
|
acdErpCounterPort0RxApsFs Unsigned32,
|
|
acdErpCounterPort0RxApsSf Unsigned32,
|
|
acdErpCounterPort0RxApsMs Unsigned32,
|
|
acdErpCounterPort0RxApsNrRb Unsigned32,
|
|
acdErpCounterPort0RxApsNr Unsigned32,
|
|
acdErpCounterPort0TxAps Unsigned32,
|
|
acdErpCounterPort0TxApsFs Unsigned32,
|
|
acdErpCounterPort0TxApsSf Unsigned32,
|
|
acdErpCounterPort0TxApsMs Unsigned32,
|
|
acdErpCounterPort0TxApsNrRb Unsigned32,
|
|
acdErpCounterPort0TxApsNr Unsigned32,
|
|
acdErpCounterPort0DropGuard Unsigned32,
|
|
acdErpCounterPort0DropUnknown Unsigned32,
|
|
acdErpCounterPort0DropMismatch Unsigned32,
|
|
acdErpCounterPort1LocalClear Unsigned32,
|
|
acdErpCounterPort1LocalFs Unsigned32,
|
|
acdErpCounterPort1LocalSf Unsigned32,
|
|
acdErpCounterPort1LocalMs Unsigned32,
|
|
acdErpCounterPort1RxAps Unsigned32,
|
|
acdErpCounterPort1RxApsFs Unsigned32,
|
|
acdErpCounterPort1RxApsSf Unsigned32,
|
|
acdErpCounterPort1RxApsMs Unsigned32,
|
|
acdErpCounterPort1RxApsNrRb Unsigned32,
|
|
acdErpCounterPort1RxApsNr Unsigned32,
|
|
acdErpCounterPort1TxAps Unsigned32,
|
|
acdErpCounterPort1TxApsFs Unsigned32,
|
|
acdErpCounterPort1TxApsSf Unsigned32,
|
|
acdErpCounterPort1TxApsMs Unsigned32,
|
|
acdErpCounterPort1TxApsNrRb Unsigned32,
|
|
acdErpCounterPort1TxApsNr Unsigned32,
|
|
acdErpCounterPort1DropGuard Unsigned32,
|
|
acdErpCounterPort1DropUnknown Unsigned32,
|
|
acdErpCounterPort1DropMismatch Unsigned32
|
|
}
|
|
|
|
acdErpCounterIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index that uniquely identifies this instance."
|
|
::= { acdErpCounterEntry 1 }
|
|
|
|
acdErpCounterPort0LocalClear OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of local clear event processed."
|
|
::= { acdErpCounterEntry 2 }
|
|
|
|
acdErpCounterPort0LocalFs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of local force switch event processed."
|
|
::= { acdErpCounterEntry 3 }
|
|
|
|
acdErpCounterPort0LocalSf OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of local signal failed event processed."
|
|
::= { acdErpCounterEntry 4 }
|
|
|
|
acdErpCounterPort0LocalMs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of local manual switch event processed."
|
|
::= { acdErpCounterEntry 5 }
|
|
|
|
acdErpCounterPort0RxAps OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of APS messages received."
|
|
::= { acdErpCounterEntry 6 }
|
|
|
|
acdErpCounterPort0RxApsFs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of force switch messages received."
|
|
::= { acdErpCounterEntry 7 }
|
|
|
|
acdErpCounterPort0RxApsSf OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of signal failed messages received."
|
|
::= { acdErpCounterEntry 8 }
|
|
|
|
|
|
acdErpCounterPort0RxApsMs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of manual switch messages received."
|
|
::= { acdErpCounterEntry 9 }
|
|
|
|
acdErpCounterPort0RxApsNrRb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of no request RPL blocked messages received."
|
|
::= { acdErpCounterEntry 10 }
|
|
|
|
acdErpCounterPort0RxApsNr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of no request messages received."
|
|
::= { acdErpCounterEntry 11 }
|
|
|
|
|
|
acdErpCounterPort0TxAps OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of APS messages transmitted."
|
|
::= { acdErpCounterEntry 12 }
|
|
|
|
acdErpCounterPort0TxApsFs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of force switch messages transmitted."
|
|
::= { acdErpCounterEntry 13 }
|
|
|
|
acdErpCounterPort0TxApsSf OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of signal failed messages transmitted."
|
|
::= { acdErpCounterEntry 14 }
|
|
|
|
|
|
acdErpCounterPort0TxApsMs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of manual switch messages transmitted."
|
|
::= { acdErpCounterEntry 15 }
|
|
|
|
acdErpCounterPort0TxApsNrRb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of no request RPL blocked messages transmitted."
|
|
::= { acdErpCounterEntry 16 }
|
|
|
|
acdErpCounterPort0TxApsNr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of no request messages transmitted."
|
|
::= { acdErpCounterEntry 17 }
|
|
|
|
acdErpCounterPort0DropGuard OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages dropped because of the guard timer."
|
|
::= { acdErpCounterEntry 18 }
|
|
|
|
acdErpCounterPort0DropUnknown OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages dropped because of unrecognized op codes."
|
|
::= { acdErpCounterEntry 19 }
|
|
|
|
acdErpCounterPort0DropMismatch OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages dropped because of erp version mismatch."
|
|
::= { acdErpCounterEntry 20 }
|
|
|
|
acdErpCounterPort1LocalClear OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of local clear event processed."
|
|
::= { acdErpCounterEntry 21 }
|
|
|
|
acdErpCounterPort1LocalFs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of local force switch event processed."
|
|
::= { acdErpCounterEntry 22 }
|
|
|
|
acdErpCounterPort1LocalSf OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of local signal failed event processed."
|
|
::= { acdErpCounterEntry 23 }
|
|
|
|
acdErpCounterPort1LocalMs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of local manual switch event processed."
|
|
::= { acdErpCounterEntry 24 }
|
|
|
|
acdErpCounterPort1RxAps OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of APS messages received."
|
|
::= { acdErpCounterEntry 25 }
|
|
|
|
acdErpCounterPort1RxApsFs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of force switch messages received."
|
|
::= { acdErpCounterEntry 26 }
|
|
|
|
acdErpCounterPort1RxApsSf OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of signal failed messages received."
|
|
::= { acdErpCounterEntry 27 }
|
|
|
|
|
|
acdErpCounterPort1RxApsMs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of manual switch messages received."
|
|
::= { acdErpCounterEntry 28 }
|
|
|
|
acdErpCounterPort1RxApsNrRb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of no request RPL blocked messages received."
|
|
::= { acdErpCounterEntry 29 }
|
|
|
|
acdErpCounterPort1RxApsNr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of no request messages received."
|
|
::= { acdErpCounterEntry 30 }
|
|
|
|
|
|
acdErpCounterPort1TxAps OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of APS messages transmitted."
|
|
::= { acdErpCounterEntry 31 }
|
|
|
|
acdErpCounterPort1TxApsFs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of force switch messages transmitted."
|
|
::= { acdErpCounterEntry 32 }
|
|
|
|
acdErpCounterPort1TxApsSf OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of signal failed messages transmitted."
|
|
::= { acdErpCounterEntry 33 }
|
|
|
|
|
|
acdErpCounterPort1TxApsMs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of manual switch messages transmitted."
|
|
::= { acdErpCounterEntry 34 }
|
|
|
|
acdErpCounterPort1TxApsNrRb OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of no request RPL blocked messages transmitted."
|
|
::= { acdErpCounterEntry 35 }
|
|
|
|
acdErpCounterPort1TxApsNr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of no request messages transmitted."
|
|
::= { acdErpCounterEntry 36 }
|
|
|
|
acdErpCounterPort1DropGuard OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages dropped because of the guard timer."
|
|
::= { acdErpCounterEntry 37 }
|
|
|
|
acdErpCounterPort1DropUnknown OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages dropped because of unrecognized op codes."
|
|
::= { acdErpCounterEntry 38 }
|
|
|
|
acdErpCounterPort1DropMismatch OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages dropped because of erp version mismatch."
|
|
::= { acdErpCounterEntry 39 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The status table
|
|
-- This table contains all erp entry status.
|
|
---------------------------------------------------------------------------
|
|
acdErpStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdErpStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all instance of ERP of this unit."
|
|
::= { acdErpStatus 1 }
|
|
|
|
acdErpStatusEntry OBJECT-TYPE
|
|
SYNTAX AcdErpStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all status for an instance"
|
|
INDEX { acdErpStatusIdx }
|
|
::= { acdErpStatusTable 1 }
|
|
|
|
AcdErpStatusEntry ::= SEQUENCE {
|
|
acdErpStatusIdx Unsigned32,
|
|
acdErpStatusName DisplayString,
|
|
acdErpStatusNodeId MacAddress,
|
|
acdErpStatusRPLNodeId MacAddress,
|
|
acdErpStatusState AcdErpStateType,
|
|
acdErpStatusRequestNodeId MacAddress,
|
|
acdErpStatusRequest Unsigned32,
|
|
acdErpPort0Status AcdErpPortStatusType,
|
|
acdErpPort0State AcdErpPortStateType,
|
|
acdErpPort1Status AcdErpPortStatusType,
|
|
acdErpPort1State AcdErpPortStateType
|
|
}
|
|
|
|
acdErpStatusIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index for each service instance."
|
|
::= { acdErpStatusEntry 1 }
|
|
|
|
acdErpStatusName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique name used to identify the instance."
|
|
::= { acdErpStatusEntry 2 }
|
|
|
|
acdErpStatusNodeId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The instance node ID."
|
|
::= { acdErpStatusEntry 3 }
|
|
|
|
acdErpStatusRPLNodeId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RPL node ID."
|
|
::= { acdErpStatusEntry 4 }
|
|
|
|
acdErpStatusState OBJECT-TYPE
|
|
SYNTAX AcdErpStateType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ERP state."
|
|
::= { acdErpStatusEntry 5 }
|
|
|
|
acdErpStatusRequestNodeId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ERP latest top priority request node ID."
|
|
::= { acdErpStatusEntry 6 }
|
|
|
|
acdErpStatusRequest OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ERP latest top priority request."
|
|
::= { acdErpStatusEntry 7 }
|
|
|
|
acdErpPort0Status OBJECT-TYPE
|
|
SYNTAX AcdErpPortStatusType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of Port 0."
|
|
::= { acdErpStatusEntry 8 }
|
|
|
|
acdErpPort0State OBJECT-TYPE
|
|
SYNTAX AcdErpPortStateType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of Port 0."
|
|
::= { acdErpStatusEntry 9 }
|
|
|
|
acdErpPort1Status OBJECT-TYPE
|
|
SYNTAX AcdErpPortStatusType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of Port 1."
|
|
::= { acdErpStatusEntry 10 }
|
|
|
|
acdErpPort1State OBJECT-TYPE
|
|
SYNTAX AcdErpPortStateType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of Port 1."
|
|
::= { acdErpStatusEntry 11 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The vlan fdb table
|
|
-- This table contains all vlan fdb entry.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdErpVlanFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdErpVlanFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains all instance of ERP of this unit."
|
|
::= { acdErpVlanFdb 1 }
|
|
|
|
acdErpVlanFdbEntry OBJECT-TYPE
|
|
SYNTAX AcdErpVlanFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all vlan fdb info for an instance"
|
|
INDEX { acdErpVlanFdbIdx }
|
|
::= { acdErpVlanFdbTable 1 }
|
|
|
|
AcdErpVlanFdbEntry ::= SEQUENCE {
|
|
acdErpVlanFdbIdx Unsigned32,
|
|
acdErpVlanFdbPort0Vids0to1023 OCTET STRING,
|
|
acdErpVlanFdbPort0Vids1024to2047 OCTET STRING,
|
|
acdErpVlanFdbPort0Vids2048to3071 OCTET STRING,
|
|
acdErpVlanFdbPort0Vids3072to4095 OCTET STRING,
|
|
acdErpVlanFdbPort1Vids0to1023 OCTET STRING,
|
|
acdErpVlanFdbPort1Vids1024to2047 OCTET STRING,
|
|
acdErpVlanFdbPort1Vids2048to3071 OCTET STRING,
|
|
acdErpVlanFdbPort1Vids3072to4095 OCTET STRING,
|
|
acdErpVlanFdbFloodingVids0to1023 OCTET STRING,
|
|
acdErpVlanFdbFloodingVids1024to2047 OCTET STRING,
|
|
acdErpVlanFdbFloodingVids2048to3071 OCTET STRING,
|
|
acdErpVlanFdbFloodingVids3072to4095 OCTET STRING,
|
|
acdErpVlanFdbFlappingVids0to1023 OCTET STRING,
|
|
acdErpVlanFdbFlappingVids1024to2047 OCTET STRING,
|
|
acdErpVlanFdbFlappingVids2048to3071 OCTET STRING,
|
|
acdErpVlanFdbFlappingVids3072to4095 OCTET STRING
|
|
}
|
|
|
|
acdErpVlanFdbIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index for each instance."
|
|
::= { acdErpVlanFdbEntry 1 }
|
|
|
|
acdErpVlanFdbPort0Vids0to1023 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 2 }
|
|
|
|
acdErpVlanFdbPort0Vids1024to2047 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 3 }
|
|
|
|
acdErpVlanFdbPort0Vids2048to3071 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 4 }
|
|
|
|
acdErpVlanFdbPort0Vids3072to4095 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 5 }
|
|
|
|
acdErpVlanFdbPort1Vids0to1023 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 6 }
|
|
|
|
|
|
acdErpVlanFdbPort1Vids1024to2047 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 7 }
|
|
|
|
acdErpVlanFdbPort1Vids2048to3071 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 8 }
|
|
|
|
acdErpVlanFdbPort1Vids3072to4095 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 9 }
|
|
|
|
|
|
acdErpVlanFdbFloodingVids0to1023 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 10 }
|
|
|
|
acdErpVlanFdbFloodingVids1024to2047 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 11 }
|
|
|
|
acdErpVlanFdbFloodingVids2048to3071 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 12 }
|
|
|
|
acdErpVlanFdbFloodingVids3072to4095 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 13 }
|
|
|
|
acdErpVlanFdbFlappingVids0to1023 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 14 }
|
|
|
|
acdErpVlanFdbFlappingVids1024to2047 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 15 }
|
|
|
|
acdErpVlanFdbFlappingVids2048to3071 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 16 }
|
|
|
|
acdErpVlanFdbFlappingVids3072to4095 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet specifies a set of eight VLANs, the first octet specifying
|
|
VLAN ID 0 through 7, and so on. Within each octet, the most significant
|
|
bit represents the lowest numbered VLAN ID. If that bit has a value of
|
|
'1' then that VLAN is included in the set of VLANs; the VLAN is not
|
|
included otherwise."
|
|
::= { acdErpVlanFdbEntry 17 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- ACD-ERP-MIB Module - Conformance Information
|
|
---------------------------------------------------------------------------
|
|
|
|
acdErpCompliances OBJECT IDENTIFIER ::= { acdErpConformance 1 }
|
|
acdErpGroups OBJECT IDENTIFIER ::= { acdErpConformance 2 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Units of conformance
|
|
---------------------------------------------------------------------------
|
|
|
|
acdErpConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdErpConfigRowStatus,
|
|
acdErpConfigName,
|
|
acdErpConfigRPLRole,
|
|
acdErpConfigRPLPort,
|
|
acdErpConfigHoldOffTimer,
|
|
acdErpConfigRevertive,
|
|
acdErpConfigGuardTimer,
|
|
acdErpConfigWTRTimer,
|
|
acdErpConfigMDLevel,
|
|
acdErpConfigAPSVid,
|
|
acdErpConfigVids0to1023,
|
|
acdErpConfigVids1024to2047,
|
|
acdErpConfigVids2048to3071,
|
|
acdErpConfigVids3072to4095,
|
|
acdErpConfigLAGPort,
|
|
acdErpConfigMep0Idx,
|
|
acdErpConfigMep1Idx
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the ERP configuration Group."
|
|
::= { acdErpGroups 1 }
|
|
|
|
acdErpCounterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdErpCounterPort0LocalClear,
|
|
acdErpCounterPort0LocalFs,
|
|
acdErpCounterPort0LocalSf,
|
|
acdErpCounterPort0LocalMs,
|
|
acdErpCounterPort0RxAps,
|
|
acdErpCounterPort0RxApsFs,
|
|
acdErpCounterPort0RxApsSf,
|
|
acdErpCounterPort0RxApsMs,
|
|
acdErpCounterPort0RxApsNrRb,
|
|
acdErpCounterPort0RxApsNr,
|
|
acdErpCounterPort0TxAps,
|
|
acdErpCounterPort0TxApsFs,
|
|
acdErpCounterPort0TxApsSf,
|
|
acdErpCounterPort0TxApsMs,
|
|
acdErpCounterPort0TxApsNrRb,
|
|
acdErpCounterPort0TxApsNr,
|
|
acdErpCounterPort0DropGuard,
|
|
acdErpCounterPort0DropUnknown,
|
|
acdErpCounterPort0DropMismatch,
|
|
acdErpCounterPort1LocalClear,
|
|
acdErpCounterPort1LocalFs,
|
|
acdErpCounterPort1LocalSf,
|
|
acdErpCounterPort1LocalMs,
|
|
acdErpCounterPort1RxAps,
|
|
acdErpCounterPort1RxApsFs,
|
|
acdErpCounterPort1RxApsSf,
|
|
acdErpCounterPort1RxApsMs,
|
|
acdErpCounterPort1RxApsNrRb,
|
|
acdErpCounterPort1RxApsNr,
|
|
acdErpCounterPort1TxAps,
|
|
acdErpCounterPort1TxApsFs,
|
|
acdErpCounterPort1TxApsSf,
|
|
acdErpCounterPort1TxApsMs,
|
|
acdErpCounterPort1TxApsNrRb,
|
|
acdErpCounterPort1TxApsNr,
|
|
acdErpCounterPort1DropGuard,
|
|
acdErpCounterPort1DropUnknown,
|
|
acdErpCounterPort1DropMismatch
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the ERP Counter Group."
|
|
::= { acdErpGroups 2 }
|
|
|
|
acdErpStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdErpStatusName,
|
|
acdErpStatusNodeId,
|
|
acdErpStatusRPLNodeId,
|
|
acdErpStatusState,
|
|
acdErpStatusRequestNodeId,
|
|
acdErpStatusRequest,
|
|
acdErpPort0Status,
|
|
acdErpPort0State,
|
|
acdErpPort1Status,
|
|
acdErpPort1State
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the ERP Status Group."
|
|
::= { acdErpGroups 3 }
|
|
|
|
acdErpVlanFdbGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdErpVlanFdbPort0Vids0to1023,
|
|
acdErpVlanFdbPort0Vids1024to2047,
|
|
acdErpVlanFdbPort0Vids2048to3071,
|
|
acdErpVlanFdbPort0Vids3072to4095,
|
|
acdErpVlanFdbPort1Vids0to1023,
|
|
acdErpVlanFdbPort1Vids1024to2047,
|
|
acdErpVlanFdbPort1Vids2048to3071,
|
|
acdErpVlanFdbPort1Vids3072to4095,
|
|
acdErpVlanFdbFloodingVids0to1023,
|
|
acdErpVlanFdbFloodingVids1024to2047,
|
|
acdErpVlanFdbFloodingVids2048to3071,
|
|
acdErpVlanFdbFloodingVids3072to4095,
|
|
acdErpVlanFdbFlappingVids0to1023,
|
|
acdErpVlanFdbFlappingVids1024to2047,
|
|
acdErpVlanFdbFlappingVids2048to3071,
|
|
acdErpVlanFdbFlappingVids3072to4095
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Erp vlan forwarding Group."
|
|
::= { acdErpGroups 4 }
|
|
|
|
acdErpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for support of the ACD-ERP-MIB module."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
acdErpConfigGroup,
|
|
acdErpCounterGroup,
|
|
acdErpStatusGroup,
|
|
acdErpVlanFdbGroup
|
|
}
|
|
|
|
OBJECT acdErpConfigRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
::= { acdErpCompliances 1 }
|
|
|
|
END
|