Observium_CE/mibs/a3com/C-PRODUCT-MCPU-MIB

210 lines
5.7 KiB
Plaintext

C-PRODUCT-MCPU-MIB DEFINITIONS ::= BEGIN
IMPORTS
mcpu FROM C-PRODUCT-GROUP-MIB
cardSlot,
vcpSideId FROM C-PRODUCT-BASE-MIB
IpAddress FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212;
-- MCPU group
mcpuVc OBJECT IDENTIFIER ::= { mcpu 1 }
mcpuNewVc OBJECT IDENTIFIER ::= { mcpu 2 }
shaper OBJECT IDENTIFIER ::= { mcpu 3 }
-- Mcpu VC subgroup
-- This table is used to access the VC's on the MCPU card For PBS600
-- Release 1.4 & 1.5.
-- Mcpu New VC Subgroup is used by PBS330 & PBS600 Rel 2.0 onwards.
mcpuNewVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF McpuNewVcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The mcpu VC information table."
::= { mcpuNewVc 1 }
mcpuNewVcEntry OBJECT-TYPE
SYNTAX McpuNewVcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a MCPU VC. The slot number (vcPortSlot)
of the MCPU card should be 1. The port number (vcPortPort)
should be 1."
INDEX { vcpSideId }
::= { mcpuNewVcTable 1 }
McpuNewVcEntry ::=
SEQUENCE {
mcpuNewVcShaper
INTEGER,
mcpuNewVcIpAddress
IpAddress,
mcpuNewVcSubnetMask
IpAddress
}
mcpuNewVcShaper OBJECT-TYPE
SYNTAX INTEGER { dr-56K (1),
dr-112K (2),
dr-224K (3),
dr-448K (4),
dr-673K (5),
dr-1344K (6),
dr-149M (7),
dr-1536M (8),
dr-192M (9),
dr-238M (10),
dr-4M (11),
dr-6M (12),
dr-8M (13),
dr-10M (14),
dr-17M (15) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Data rate supported by the MCPU VC. "
::= { mcpuNewVcEntry 1 }
mcpuNewVcIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Management VC IP address."
DEFVAL { '00000000'h }
::= { mcpuNewVcEntry 2 }
mcpuNewVcSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Management VC IP subnet mask."
DEFVAL { '00000000'h }
::= { mcpuNewVcEntry 3 }
-- shaper Configuration Group
shaperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShaperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The shaper Table contains up to 15 shapers rate. This
table uses cardSlot and Shaper number as an index which
is uniquely assoicate to entry of each shaper. "
::= { shaper 1 }
shaperEntry OBJECT-TYPE
SYNTAX ShaperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in the table contains the information of
a shaper."
INDEX { cardSlot, shaperNumber }
::= { shaperTable 1 }
ShaperEntry ::=
SEQUENCE {
shaperNumber
INTEGER,
shaperSustainableCellRateInbps
INTEGER,
shaperSustainableCellRateIncps
INTEGER,
shaperPeakCellRateInbps
INTEGER,
shaperPeakCellRateIncps
INTEGER,
shaperMaximumBurstSizeInBits
INTEGER,
shaperMaximumBurstSizeInCells
INTEGER
}
shaperNumber OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Shaper Number of a frame based card"
::= { shaperEntry 1 }
shaperSustainableCellRateInbps OBJECT-TYPE
SYNTAX INTEGER (16000..17000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sustainable Cell Rate (SCR), in bits per second, is an upper
bound on the conforming average rate of an ATM connection
over time scales."
::= { shaperEntry 2 }
shaperSustainableCellRateIncps OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sustainable Cell Rate (SCR), in cells per second, is an upper
bound on the conforming average rate of an ATM connection
over time scales. The value is calculated based on the
input from SCR in bps."
::= { shaperEntry 3 }
shaperPeakCellRateInbps OBJECT-TYPE
SYNTAX INTEGER (784000..17000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak Cell Rate (PCR), in bits per second, is the rate at
which ATM source end system can send to a referenced
physical service access point that is equal to the
inverse of the minimum cell interarrival time. The
value of Peak Rate Cell Rate (PCR) cannot be lower
than Sustainable Cell Rate (SCR). "
::= { shaperEntry 4 }
shaperPeakCellRateIncps OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Peak Cell Rate (PCR), in cells per second, is the rate at
which ATM source end system can send to a referenced
physical service access point that is equal to the
inverse of the minimum cell interarrival time. The
value of Peak Rate Cell Rate (PCR) is calculated
based on the input from PCR in bps. "
::= { shaperEntry 5 }
shaperMaximumBurstSizeInBits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum Burst Size in bits.
This value is read only and is calculated again
when MBS (in cells) is changed"
::= { shaperEntry 6 }
shaperMaximumBurstSizeInCells OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum Burst Size in cells.
Minimum value is 1 cell and maximum value is
255 cells. "
::= { shaperEntry 7 }
END