1344 lines
54 KiB
Plaintext
1344 lines
54 KiB
Plaintext
|
|
--
|
|
-- This MIB is for 3Com intermediate systems that support bridging
|
|
--
|
|
--
|
|
-- The 3Com Enterprise Products Proprietary MIB Extensions
|
|
--
|
|
-- Copyright 3Com Corporation, 1993. All rights reserved.
|
|
--
|
|
-- changes FOR 8.0 (r2 of MIB)*****************************************
|
|
-- 01-jun-94: kxy deprecated X25 queue size, X25 vc limit, & X25 vc timer
|
|
-- objects.
|
|
--
|
|
-- changes FOR 8.2 (r3 of MIB)*****************************************
|
|
-- 10-feb-95: ehk added HoldTime, MinAccPri, RtDisc, and GwCont objects
|
|
-- 24-apr-95: kxy updated ACCESS of a3ComBrgSrRDPort to read-only
|
|
-- 18-May-95: kxy updated DEFVAL for a3ComBrgSrGwContEncapMode
|
|
--
|
|
-- changes FOR 8.3 (r4 of MIB)*****************************************
|
|
-- 29-Sep-95: ehk added two objects for use by SmartFiltering feature
|
|
-- These are opaque to normal nm requests.
|
|
--
|
|
--
|
|
|
|
|
|
A3Com-Bridge-r3-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises
|
|
FROM RFC1155-SMI
|
|
MacAddress
|
|
FROM RFC1286-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
--
|
|
-- This MIB is for 3Com systems that offer a Bridging
|
|
-- service
|
|
--
|
|
--
|
|
|
|
a3Com OBJECT IDENTIFIER ::= { enterprises 43 }
|
|
brouterMIB OBJECT IDENTIFIER ::= { a3Com 2 }
|
|
a3ComBridge OBJECT IDENTIFIER ::= { brouterMIB 9 }
|
|
|
|
SMDSAddress ::= OCTET STRING (SIZE (8))
|
|
-- the 60-bit SMDS address, preceded by 4 bits with the
|
|
-- following values:
|
|
-- "1100" when representing an individual address
|
|
-- "1110" when representing a group address
|
|
|
|
RowStatus ::= INTEGER {
|
|
-- the following two values are states
|
|
-- these values can be read or written
|
|
active(1),
|
|
notInService(2),
|
|
|
|
-- the following value is a state:
|
|
-- this value may be read, but not written
|
|
notReady(3),
|
|
|
|
-- the following three values are actions
|
|
-- these values can be written, but are never read
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
|
|
--This data type, which has the same semantics as the RowStatus
|
|
--textual convention used in SNMPv2, is used to add and
|
|
--delete entries from a table.
|
|
|
|
--The tables in this MIB allow a subset of the functionality
|
|
--provided by the RowStatus textual convention. In particular
|
|
--row creation is allowed using only the createAndGo method.
|
|
|
|
--That is, when adding entries to this table, this object
|
|
--must be set to createAndGo(4). The instance identifier
|
|
--for this object will define the values of the columns
|
|
--that make up the index.
|
|
|
|
--In the same PDU, the appropriate remaining columns
|
|
--of that row must be set as well. The agent
|
|
--will immediately set the value of this object to
|
|
--active(1) if the row is correct. If not, the agent
|
|
--will refuse the SET request and return an
|
|
--error code.
|
|
|
|
--To modify an existing entry, it must be removed
|
|
--an another entry with the desired changes added.
|
|
|
|
--To remove an entry, set the value of this object
|
|
--to destroy(6).
|
|
|
|
--
|
|
-- Group Definitions
|
|
--
|
|
a3ComBrgGen OBJECT IDENTIFIER ::= { a3ComBridge 1 }
|
|
a3ComBrgStp OBJECT IDENTIFIER ::= { a3ComBridge 2 }
|
|
a3ComBrgSr OBJECT IDENTIFIER ::= { a3ComBridge 3 }
|
|
|
|
X121Address ::= OCTET STRING (SIZE(0..17))
|
|
|
|
-- 0 to 17 bytes in length containing the ASCII
|
|
-- characters [0-9], each octet contains one digit of
|
|
-- the address
|
|
|
|
|
|
--
|
|
-- This first group, a3ComBrgGen, contains objects that control
|
|
-- parameters relating to the general operation of the bridge.
|
|
--
|
|
|
|
a3ComBrgCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bridging (1),
|
|
noBridging (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether bridging is performed
|
|
by this system. If this is set to noBridging (2),
|
|
all functions associated with bridging are disabled,
|
|
including Spanning Tree, Learning, and Source Routing."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter: Control"
|
|
DEFVAL { noBridging }
|
|
::= { a3ComBrgGen 1 }
|
|
|
|
a3ComBrgAgeCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aging (1),
|
|
noAging (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether nodes that have not
|
|
transmitted packets for a specified amount of time
|
|
are deleted from the forwarding table. If this
|
|
object is set to aging (1), entries in the forwarding
|
|
table are removed after dot1dTpAgingTime seconds.
|
|
This is useful in environments where nodes may be
|
|
moved from one network to another. Setting this object
|
|
to noAging (2), however, improves performance."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter: CONTrol"
|
|
DEFVAL { aging }
|
|
::= { a3ComBrgGen 2 }
|
|
|
|
a3ComBrgFwallCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
firewall (1),
|
|
noFirewall (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is important when the system is performing
|
|
both bridging and routing. When this is set to
|
|
firewall (1), the bridge discards unicast packets
|
|
of a protocol that is being routed (other than the
|
|
unicast packets addressed to the bridge itself).
|
|
If this is set to noFirewall, the bridge forwards
|
|
those packets."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter: Control"
|
|
DEFVAL { firewall }
|
|
::= { a3ComBrgGen 3 }
|
|
|
|
a3ComBrgLearnCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
learn (1),
|
|
noLearn (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether the bridge creates
|
|
and updates entries in its forwarding tables."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter: Control"
|
|
DEFVAL { learn }
|
|
::= { a3ComBrgGen 4 }
|
|
|
|
a3ComBrgForwardCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forward (1),
|
|
noForward (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether the bridge forwards
|
|
packets. This has no effect on other bridging
|
|
related functions, such as Spanning Tree, Learning,
|
|
and Source Routing. Setting this object to
|
|
noForward (2), allows isolation of the attached
|
|
networks for diagnostic purposes."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter: Control"
|
|
DEFVAL { forward }
|
|
::= { a3ComBrgGen 5 }
|
|
|
|
a3ComBrgAppleCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object enables the bridge to forward
|
|
AppleTalk packets between Ethernet, FDDI, and
|
|
token ring networks. The AppleTalk packets
|
|
require encapsulation over FDDI networks.
|
|
If AppleTalk packets are to be translated
|
|
the same way as other Ethernet packets are
|
|
translated, this parameter must be disabled (2).
|
|
|
|
If this object is enabled, the original format
|
|
of both AT-1 (Ethernet) and AT-2 (SNAP) packets
|
|
are preserved when bridging between Ethernets
|
|
over an FDDI backbone. If this is disabled,
|
|
AT-2 packets are converted to Ethernet format
|
|
before going across the FDDI backbone."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter: AppleTalk"
|
|
DEFVAL { enable }
|
|
::= { a3ComBrgGen 6 }
|
|
|
|
a3ComBrgFwTblCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other (1),
|
|
dynToStatic (2),
|
|
delStatic (3),
|
|
delDyn (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to trigger actions taken on the
|
|
static forwarding table. When this object is set to
|
|
dynToStatic (2), all dynamically learned entries
|
|
in the forwarding table are marked static. When
|
|
this object is set to delStatic (3), all statically
|
|
learned entries are deleted. When this object is set to
|
|
delDyn (4), all dynamically learned entries are deleted.
|
|
When a GET request is received for this object, the
|
|
value other (1) is returned."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, ADD -BRidge ROUte All,
|
|
DEL -Bridge ROUte All, FLush -BRidge AllRoutes."
|
|
::= { a3ComBrgGen 7 }
|
|
|
|
a3ComBrgFwTblSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object returns the size of the bridge
|
|
forwarding table in units of 2^(9+n) where
|
|
n is the value of this object. Thus, if this
|
|
object has the value 2, then the bridge
|
|
forwarding table has 2048 entries.
|
|
|
|
If this value is changed, via a set, the
|
|
new value will take affect only after the
|
|
bridging service is disabled and re-enabled."
|
|
::= { a3ComBrgGen 8 }
|
|
|
|
a3ComBrgBLimitTimer OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
timer400ms (2),
|
|
timer600ms (3),
|
|
timer800ms (4),
|
|
timer1000ms (5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to select the broadcast limit
|
|
feature sample interval. That is, this object
|
|
contains the value of the time interval over which
|
|
the number of broadcast packets per second are calculated.
|
|
If that number exceeds the value of a3ComBrgBroadCastLimit
|
|
for a particular port, the bridge will stop forwarding
|
|
all broadcast packets on that port for the rest of
|
|
the time interval."
|
|
REFERENCE
|
|
"NETBuilder Reference Guide, Bridge Service Parameter:
|
|
BLimitTimer"
|
|
DEFVAL { disabled }
|
|
::= { a3ComBrgGen 9 }
|
|
--
|
|
-- The following tables contain bridge forwarding information
|
|
--
|
|
|
|
a3ComBrgStExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBrgStExtEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table is an extension of the dot1dStaticTable
|
|
from the Bridge MIB, rfc1286. One additional
|
|
column has been defined to identify the proper wide
|
|
area address when bridging over a wide area port."
|
|
REFERENCE
|
|
"Bridge MIB, RFC1286, page 33"
|
|
::= { a3ComBrgGen 10 }
|
|
|
|
a3ComBrgStExtEntry OBJECT-TYPE
|
|
SYNTAX A3ComBrgStExtEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An extension to the dot1dStaticTable from rfc1286."
|
|
INDEX { a3ComBrgStExtAdd, a3ComBrgStExtRcvPort }
|
|
::= { a3ComBrgStExtTable 1 }
|
|
|
|
A3ComBrgStExtEntry ::=
|
|
SEQUENCE {
|
|
a3ComBrgStExtAdd MacAddress,
|
|
a3ComBrgStExtRcvPort INTEGER,
|
|
a3ComBrgStExtWaAddress OCTET STRING
|
|
}
|
|
|
|
a3ComBrgStExtAdd OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unicast MAC address for which the bridge has
|
|
forwarding and/or filtering information."
|
|
REFERENCE
|
|
"dot1dStaticAddress, Bridge MIB, RFC1286, page 33"
|
|
::= { a3ComBrgStExtEntry 1 }
|
|
|
|
a3ComBrgStExtRcvPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Either the value '0' or the port number of the
|
|
port from which a frame must be received in order
|
|
for this entry's filtering information to apply.
|
|
A value of zero indicates that this entry applies
|
|
on all ports of the bridge for which there is no
|
|
other applicable entry."
|
|
REFERENCE
|
|
"dot1dStaticReceivePort, Bridge MIB, RFC1286, page 34"
|
|
::= { a3ComBrgStExtEntry 2 }
|
|
|
|
a3ComBrgStExtWaAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When the destination port to which this table entry
|
|
applies is a wide area port, this object is used to
|
|
identify the wide area address to use when forwarding
|
|
packets to this destination. The type of address can
|
|
be determined by the ifType value corresponding to
|
|
the port identified by dot1dStaticAllowedToGoTo or
|
|
dot1dTpFdbPort. If the port is not a wide area port,
|
|
this object will contain a zero length string.
|
|
|
|
The representation of the addresses will follow the
|
|
convention used in standard MIBs. For example,
|
|
Frame Relay DLCI's will be encoded as binary numbers
|
|
and placed in the OCTET STRING. X.25 addresses, on
|
|
the other hand will be encoded as ASCII characters
|
|
[0..9], with each octet of the OCTET STRING containing
|
|
the ASCII representation of one digit."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, ADD -BRidge ROUte DLCI WanID"
|
|
::= { a3ComBrgStExtEntry 3 }
|
|
|
|
|
|
|
|
|
|
a3ComBrgFdbExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBrgFdbExtEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table is an extension of the dot1dTpFdbTable
|
|
from the Bridge MIB, rfc1286. One additional
|
|
column has been defined to identify the proper wide
|
|
area address when bridging over a wide area port."
|
|
REFERENCE
|
|
"Bridge MIB, RFC1286, page 29"
|
|
::= { a3ComBrgGen 11 }
|
|
|
|
a3ComBrgFdbExtEntry OBJECT-TYPE
|
|
SYNTAX A3ComBrgFdbExtEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An extension to the dot1dTpFdbTable from rfc1286."
|
|
INDEX { a3ComBrgFdbExtAdd }
|
|
::= { a3ComBrgFdbExtTable 1 }
|
|
|
|
A3ComBrgFdbExtEntry ::=
|
|
SEQUENCE {
|
|
a3ComBrgFdbExtAdd MacAddress,
|
|
a3ComBrgFdbExtWaAddress OCTET STRING
|
|
}
|
|
|
|
a3ComBrgFdbExtAdd OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unicast MAC address for which the bridge has
|
|
forwarding and/or filtering information."
|
|
REFERENCE
|
|
"dot1dTpFdbAddress, Bridge MIB, RFC1286, page 30"
|
|
::= { a3ComBrgFdbExtEntry 1 }
|
|
|
|
a3ComBrgFdbExtWaAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When the port to which this table entry applies
|
|
is a wide area port, this object is used to
|
|
identify the wide area address to use when forwarding
|
|
packets to this destination. The type of address can
|
|
be determined by the ifType value corresponding to
|
|
the port identified by dot1dTpFdbPort. If the port
|
|
is not a wide area port, this object will contain
|
|
a zero length string."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, ADD -BRidge ROUte DLCI WanID"
|
|
::= { a3ComBrgFdbExtEntry 2 }
|
|
|
|
|
|
--
|
|
-- The following table contains generic port information and
|
|
-- controls
|
|
--
|
|
|
|
a3ComBrgPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBrgPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table is an extension of the dot1dBasePortTable
|
|
from the Bridge MIB defined in RFC1286. This table
|
|
contains generic information and control facilities
|
|
for every port that is associated with the bridge.
|
|
Transparent, source-route, and srt ports are included."
|
|
::= { a3ComBrgGen 12 }
|
|
|
|
a3ComBrgPortEntry OBJECT-TYPE
|
|
SYNTAX A3ComBrgPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry in this table contains information and
|
|
controls for a specific bridge port."
|
|
REFERENCE
|
|
"dot1dBasePortTable, Bridge MIB, RFC1286, page 11"
|
|
INDEX { a3ComBrgPortIndex }
|
|
::= { a3ComBrgPortTable 1 }
|
|
|
|
A3ComBrgPortEntry ::=
|
|
SEQUENCE {
|
|
a3ComBrgPortIndex INTEGER,
|
|
a3ComBrgPortCtl INTEGER,
|
|
a3ComBrgDstSecCtl INTEGER,
|
|
a3ComBrgSrcSecCtl INTEGER,
|
|
a3ComBrgX25Pid INTEGER,
|
|
a3ComBrgX25Qsize INTEGER,
|
|
a3ComBrgX25VcLimit INTEGER,
|
|
a3ComBrgX25VcTimer INTEGER,
|
|
a3ComBrgBroadCastLimit INTEGER,
|
|
a3ComBrgSmdsGroupAddr SMDSAddress,
|
|
a3ComBrgX25ProfId INTEGER
|
|
}
|
|
|
|
a3ComBrgPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number of the port for which this
|
|
entry contains bridge management information."
|
|
REFERENCE
|
|
"dot1dBasePortTable, Bridge MIB, RFC1286, page 11"
|
|
::= { a3ComBrgPortEntry 1 }
|
|
|
|
a3ComBrgPortCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
transparent (1), -- bridge only tr packets
|
|
sourceRoute (2), -- bridge only sr packets
|
|
srtEnabled (3), -- bridge both
|
|
noBridging (4) -- no bridging
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object controls which type(s) of packets
|
|
are bridged. This has no affect on whether the
|
|
bridge participates in either the Spanning Tree
|
|
or Source Route Protocols."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SETDefault !port -BRidge
|
|
BRidgeFunction = Enable, SETDefault !port -SRT
|
|
CONTrol = (SrcRouting|NoSrcRouting, Transparent|
|
|
NoTransparent)"
|
|
DEFVAL { noBridging }
|
|
::= { a3ComBrgPortEntry 2 }
|
|
|
|
a3ComBrgDstSecCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
forward (2),
|
|
block (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a security feature that allows the
|
|
control of packets sent to specific destinations.
|
|
If this object is set to forward (2), only those
|
|
packets for destination addresses listed in the static
|
|
forwarding table can be forwarded by this port. If
|
|
this object is set to block (3), any packet destined
|
|
for an address listed in the static forwarding table is
|
|
blocked by this port. Note, these actions are taken
|
|
by this port after it receives a packet from the network.
|
|
This does not apply to packets it forwards to the
|
|
network."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter:
|
|
DStSecurity"
|
|
DEFVAL { none }
|
|
::= { a3ComBrgPortEntry 3 }
|
|
|
|
a3ComBrgSrcSecCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
forward (2),
|
|
block (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is a security feature that allows the
|
|
control of packets sent from specific source addresses.
|
|
If this object is set to forward (2), this port will
|
|
forward only those packets sent from addresses listed
|
|
in the static forwarding table for this port. If this
|
|
object is set to block, this port will block every
|
|
packet sent by a station whose address is listed
|
|
in the static forwarding table for this port. Note,
|
|
these actions are taken by this port after it receives
|
|
a packet from the network. This does not apply to
|
|
packets it forwards to the network."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter:
|
|
SRcSecurity"
|
|
DEFVAL { none }
|
|
::= { a3ComBrgPortEntry 4 }
|
|
|
|
a3ComBrgX25Pid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object applies to transparent bridging
|
|
over an X25 network. It specifies the protocol
|
|
ID to be used in an outgoing X25 call."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter: X25ProtID"
|
|
DEFVAL { 221 }
|
|
::= { a3ComBrgPortEntry 5 }
|
|
|
|
a3ComBrgX25Qsize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object applies to transparent bridging
|
|
over an X25 network. It allows the specification
|
|
of the maximum number of packets that can be
|
|
queued on any single virtual circuit to a
|
|
specific DTE neighbor when the virtual circuit
|
|
on the X25 port is congested.
|
|
|
|
NOTE: this object is no longer supported by NETBuilders
|
|
running sw version 8.0 and greater."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter:
|
|
X25QueueSize"
|
|
DEFVAL { 4 }
|
|
::= { a3ComBrgPortEntry 6 }
|
|
|
|
a3ComBrgX25VcLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object allows the specification of the
|
|
maximum number of virtual circuits to a
|
|
specific DTE that can be established concurrently
|
|
for transparent bridging over an x25 network.
|
|
|
|
NOTE: this object is no longer supported by NETBuilders
|
|
running sw version 8.0 and greater."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter:
|
|
X25VCLimit"
|
|
DEFVAL { 1 }
|
|
::= { a3ComBrgPortEntry 7 }
|
|
|
|
a3ComBrgX25VcTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..512)
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the maximum amount of
|
|
time, in minutes, that can elapse when there
|
|
is no activity on the x25 virtual circuit to a DTE
|
|
before it is cleared.
|
|
|
|
NOTE: this object is no longer supported by NETBuilders
|
|
running sw version 8.0 and greater."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, Bridge Service parameter:
|
|
X25VCTimer"
|
|
DEFVAL { 20 }
|
|
::= { a3ComBrgPortEntry 8 }
|
|
|
|
a3ComBrgBroadCastLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the maximum rate, in
|
|
packets per second, at which broadcast and
|
|
multicast packets are forwarded through this
|
|
port. If the number of these packets during
|
|
a single time interval (specified by
|
|
a3ComBrgBLimitTimer) exceeds the number
|
|
allowed during that interval, as calculated
|
|
from the value of this object, all further
|
|
broadcast and multicast packets will be
|
|
discarded for the rest of the time interval.
|
|
|
|
If this object is set to zero, this feature
|
|
is disabled for this port.
|
|
|
|
Note, any changes to this object will only
|
|
take affect after the system is rebooted."
|
|
REFERENCE
|
|
"NETBuilder Reference Guide, Bridge Service Parameter:
|
|
BroadCastLimit"
|
|
DEFVAL { 0 }
|
|
::= { a3ComBrgPortEntry 9 }
|
|
|
|
a3ComBrgSmdsGroupAddr OBJECT-TYPE
|
|
SYNTAX SMDSAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the SMDS Group Address that
|
|
is used by the bridge to transmit packets to
|
|
all the other bridges identified by this SMDS
|
|
Group Address. This address is used as the SMDS
|
|
destination address when transmitting spanning tree
|
|
BPDU packets, all bridged broadcast and multicast
|
|
packets, and bridged packets containing a destination
|
|
address that has not yet been learned.
|
|
|
|
If the address is less than 8 Octets, the remaining
|
|
octets are padded with 0xFF's.
|
|
|
|
If there is no SMDS Group Address assigned, this object
|
|
will return all zeroes.
|
|
|
|
Note, bridging must be enabled for any sets made to this
|
|
object to be affected."
|
|
REFERENCE
|
|
"NETBuilder Reference Guide, Bridge Service Parameter:
|
|
SMDSGroupAddress"
|
|
::= { a3ComBrgPortEntry 10 }
|
|
|
|
a3ComBrgX25ProfId OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the X25 User ProfileID to be used for
|
|
selecting a Virtual Circuit to send Bridged Packets. Range
|
|
is 0..255. If the value specified is 0 then use the DTE Profile
|
|
ID"
|
|
DEFVAL { 0 }
|
|
::= { a3ComBrgPortEntry 14 }
|
|
|
|
--
|
|
-- This table stores a list of neighboring DTEs that support
|
|
-- transparent bridging over an X25 network
|
|
--
|
|
|
|
a3ComBrgX25NbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBrgX25NbrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table specifies the DTE address of each
|
|
X25 neighbor that supports transparent bridging.
|
|
The bridge will forward to the neighbors defined in
|
|
this table all broadcast packets and unknown
|
|
unicast packets."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guilde, Bridge Service parameter:
|
|
X25Neighbor"
|
|
::= { a3ComBrgGen 13 }
|
|
|
|
a3ComBrgX25NbrEntry OBJECT-TYPE
|
|
SYNTAX A3ComBrgX25NbrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the DTE address of an X25 neighbor."
|
|
INDEX { a3ComBrgX25NbrPort, a3ComBrgX25NbrDTE }
|
|
::= { a3ComBrgX25NbrTable 1 }
|
|
|
|
A3ComBrgX25NbrEntry ::=
|
|
SEQUENCE {
|
|
a3ComBrgX25NbrPort INTEGER,
|
|
a3ComBrgX25NbrDTE X121Address,
|
|
a3ComBrgX25NbrStatus RowStatus
|
|
}
|
|
|
|
a3ComBrgX25NbrPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The bridge port to which this entry applies."
|
|
::= { a3ComBrgX25NbrEntry 1 }
|
|
|
|
a3ComBrgX25NbrDTE OBJECT-TYPE
|
|
SYNTAX X121Address
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The X121 address of the neighbor DTE."
|
|
::= { a3ComBrgX25NbrEntry 2 }
|
|
|
|
a3ComBrgX25NbrStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to add and delete entries
|
|
in this table. See the notes describing
|
|
RowStatus at the beginning of this MIB."
|
|
::= { a3ComBrgX25NbrEntry 3 }
|
|
|
|
--
|
|
-- Spanning Tree parameter group
|
|
--
|
|
|
|
a3ComBrgStpMultAdd OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the multicast MAC address used by bridges
|
|
running the Spanning Tree Protocol."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, STP Service parameter: ADDRess"
|
|
::= { a3ComBrgStp 1 }
|
|
|
|
a3ComBrgStpCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used to enable/disable the Spanning
|
|
Tree Protocol for the bridge as a whole."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, STP Service parameter: CONTrol"
|
|
DEFVAL { enabled }
|
|
::= { a3ComBrgStp 2 }
|
|
|
|
a3ComBrgStpHopCtl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hopReduce (1),
|
|
noHopReduce (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether the bridge
|
|
considers the number of hops needed to forward
|
|
a packet to the root bridge when it selects
|
|
a root port. If hopReduce is selected, the
|
|
bridge increases its root path cost by 1. If
|
|
noHopReduce is selected and two ports have the
|
|
same root path cost, the port that offers the least
|
|
number of hops might not be chosen as the root port."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, STP Service parameter: CONTrol"
|
|
DEFVAL { noHopReduce }
|
|
::= { a3ComBrgStp 3 }
|
|
|
|
--
|
|
-- Source Routing parameter group
|
|
--
|
|
-- These parameters define how the bridge will behave
|
|
-- when bridging source routed packets.
|
|
--
|
|
|
|
a3ComBrgSrMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ieee (1),
|
|
passiveBridging (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the mode of source routing
|
|
in use on the bridge. If ieee (1) is selected,
|
|
explorer frames are modified and the forwarding
|
|
path of the specifically routed frames is
|
|
determined from the routing information (RI) field.
|
|
If passiveBridging (2) is selected, the source
|
|
routed frames are bridged across the spanning
|
|
tree as if they were transparent frames without
|
|
examining or updating the RI field. When in
|
|
passiveBridging mode, the same ring number should
|
|
be assinged to all active ports of the bridge."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SRT Service parameter: Mode"
|
|
DEFVAL { ieee }
|
|
::= { a3ComBrgSr 1 }
|
|
|
|
|
|
|
|
a3ComBrgSrPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBrgSrPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains port specific source routing
|
|
information."
|
|
::= { a3ComBrgSr 2 }
|
|
|
|
a3ComBrgSrPortEntry OBJECT-TYPE
|
|
SYNTAX A3ComBrgSrPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains a set of information applied
|
|
to a specific bridge port."
|
|
INDEX { a3ComBrgSrPort }
|
|
::= { a3ComBrgSrPortTable 1 }
|
|
|
|
A3ComBrgSrPortEntry ::=
|
|
SEQUENCE {
|
|
a3ComBrgSrPort INTEGER,
|
|
a3ComBrgSrPortSTEHopCount INTEGER,
|
|
a3ComBrgSrPortAREHopCount INTEGER,
|
|
a3ComBrgSrPortHoldTime INTEGER,
|
|
a3ComBrgSrPortMinAccessPrior INTEGER
|
|
}
|
|
|
|
a3ComBrgSrPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the bridge port to which
|
|
the other objects in this entry apply."
|
|
::= { a3ComBrgSrPortEntry 1 }
|
|
|
|
a3ComBrgSrPortSTEHopCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object contains the maximum number of
|
|
routing descriptors (ie, hop count) for Spanning
|
|
Tree Explorer frames."
|
|
::= { a3ComBrgSrPortEntry 2 }
|
|
|
|
a3ComBrgSrPortAREHopCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object contains the maximum number of
|
|
routing descriptors (ie, hop count) for All
|
|
Routes Explorer frames."
|
|
::= { a3ComBrgSrPortEntry 3 }
|
|
|
|
a3ComBrgSrPortHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1440)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter specifies the time interval,
|
|
in minutes, that an inactive route entry can
|
|
reside in the source routing table."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: HoldTime"
|
|
DEFVAL { 15 }
|
|
::= { a3ComBrgSrPortEntry 4 }
|
|
|
|
a3ComBrgSrPortMinAccessPrior OBJECT-TYPE
|
|
SYNTAX INTEGER (0..6)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter determines the minimum access
|
|
priority used for outoing frames on this port.
|
|
End systems usually have a low access priority
|
|
while bridges have a medium priority. This
|
|
allows bridge, which typically handle larger
|
|
volumes of data, to get the token faster than
|
|
end systems. If the user priority of the frame
|
|
is greateer than the minumum access priority, the
|
|
user priority is used as the access priority. The
|
|
user priority of the frame is determined by the
|
|
access priority of the incoming frame."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: MinAccessPrior"
|
|
DEFVAL { 4 }
|
|
::= { a3ComBrgSrPortEntry 5 }
|
|
|
|
|
|
|
|
|
|
|
|
a3ComBrgSrWanAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBrgSrWanAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing mappings between Ring Number,
|
|
Bridge Number, and Wide Area Addresses. This
|
|
information is learned from Explorer Frames sent
|
|
by end stations."
|
|
::= { a3ComBrgSr 3 }
|
|
|
|
a3ComBrgSrWanAddrEntry OBJECT-TYPE
|
|
SYNTAX A3ComBrgSrWanAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains a single Ring Number, Bridge
|
|
Number, Wide Area Address mapping."
|
|
INDEX { a3ComBrgSrWAportIndex, a3ComBrgSrWAringNum, a3ComBrgSrWAbrgNum }
|
|
::= { a3ComBrgSrWanAddrTable 1 }
|
|
|
|
A3ComBrgSrWanAddrEntry ::=
|
|
SEQUENCE {
|
|
a3ComBrgSrWAportIndex INTEGER,
|
|
a3ComBrgSrWAringNum INTEGER,
|
|
a3ComBrgSrWAbrgNum INTEGER,
|
|
a3ComBrgSrWAddress OCTET STRING
|
|
}
|
|
|
|
a3ComBrgSrWAportIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the bridge port that is connected
|
|
to the ring identified by a3ComBrgSrWAringNum."
|
|
::= { a3ComBrgSrWanAddrEntry 1 }
|
|
|
|
a3ComBrgSrWAringNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies a specific wide area network. When
|
|
a source route frame is bridged to this ring number,
|
|
and to the bridge identified by a3ComBrgSrWAbrgNum,
|
|
the Wide Area Address identified by the corresponding
|
|
instance of a3ComBrgSrWAddress is used to forward the
|
|
frame to the proper bridge."
|
|
::= { a3ComBrgSrWanAddrEntry 2 }
|
|
|
|
a3ComBrgSrWAbrgNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the bridge associated with the
|
|
Wide Area Address identified by a3ComBrgSrWAddress."
|
|
::= { a3ComBrgSrWanAddrEntry 3 }
|
|
|
|
a3ComBrgSrWAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the Wide Area Address associated
|
|
with a specific ring number and bridge number. These
|
|
are identified by the corresponding instances of
|
|
a3ComBrgSrWAringNum and a3ComBrgSrWAbrgNum."
|
|
::= { a3ComBrgSrWanAddrEntry 4 }
|
|
|
|
|
|
|
|
a3ComBrgSrGwVirRing OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter is used whenever SRTG is bridging packets
|
|
between TB and SR domains. Before forwarding packets from
|
|
a TB domain, SRTG specifically adds this 'virtual' ring
|
|
number and its own bridge number to the source route
|
|
information of the destination station retrieved from the
|
|
SRDB. Thus from a source routing station's point of
|
|
view, the entire transparent bridge LAN appears as a single
|
|
source routed ring. If this parameter has the value 0,
|
|
no virtual ring number is added."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: GatewayVRing"
|
|
DEFVAL { 0 }
|
|
::= { a3ComBrgSr 4 }
|
|
|
|
|
|
|
|
|
|
a3ComBrgSrGwContTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBrgSrGwContEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
""
|
|
::= { a3ComBrgSr 5 }
|
|
|
|
a3ComBrgSrGwContEntry OBJECT-TYPE
|
|
SYNTAX A3ComBrgSrGwContEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry in this table control the behavior of
|
|
the SRT Gateway feature for a specific port."
|
|
INDEX { a3ComBrgSrGwContPort }
|
|
::= { a3ComBrgSrGwContTable 1 }
|
|
|
|
A3ComBrgSrGwContEntry ::=
|
|
SEQUENCE {
|
|
a3ComBrgSrGwContPort INTEGER,
|
|
a3ComBrgSrGwCont INTEGER,
|
|
a3ComBrgSrGwContEncapMode INTEGER,
|
|
a3ComBrgSrGwContAutoMode INTEGER
|
|
}
|
|
|
|
a3ComBrgSrGwContPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the bridge port to which the
|
|
other objects in this entry apply."
|
|
::= { a3ComBrgSrGwContEntry 1 }
|
|
|
|
a3ComBrgSrGwCont OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter is used to enable or disable
|
|
the SRT Gateway feature for this port."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: GatewayControl"
|
|
DEFVAL { disable }
|
|
::= { a3ComBrgSrGwContEntry 2 }
|
|
|
|
|
|
a3ComBrgSrGwContEncapMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ieeeMode (1),
|
|
etherMode (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter is used to control how packets using
|
|
Token Ring LLC-based protocols are converted when
|
|
bridged to Ethernet LANs. If this object has the
|
|
value 'ieeeMode', those packets will be translated
|
|
into IEEE 802.2 frames. Otherwise, they will be
|
|
converted into Ethernet Version II format. Note,
|
|
if the type of frame used by the destination is
|
|
known (ie, if autoMode is selected and the station
|
|
is known), this parameter is ignored and the previously
|
|
seen frame type is used."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: GatewayControl"
|
|
DEFVAL { ieeeMode }
|
|
::= { a3ComBrgSrGwContEntry 3 }
|
|
|
|
a3ComBrgSrGwContAutoMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoMode (1),
|
|
noAutoMode (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter specifies whether or not the encapsulation
|
|
format of each end stations is stored."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: GatewayControl"
|
|
DEFVAL { autoMode }
|
|
::= { a3ComBrgSrGwContEntry 4 }
|
|
|
|
|
|
a3ComBrgSrRDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF A3ComBrgSrRDEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table specifies whether end system source routing
|
|
is enabled on for each port on the system. There are
|
|
separate controls for each protocol that may use source
|
|
routing."
|
|
::= { a3ComBrgSr 6 }
|
|
|
|
a3ComBrgSrRDEntry OBJECT-TYPE
|
|
SYNTAX A3ComBrgSrRDEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry applies to a specific port."
|
|
INDEX { a3ComBrgSrRDPort }
|
|
::= { a3ComBrgSrRDTable 1 }
|
|
|
|
A3ComBrgSrRDEntry ::=
|
|
SEQUENCE {
|
|
a3ComBrgSrRDPort INTEGER,
|
|
a3ComBrgSrRDAppleTalk INTEGER,
|
|
a3ComBrgSrRDClnp INTEGER,
|
|
a3ComBrgSrRDDecNet INTEGER,
|
|
a3ComBrgSrRDDlTest INTEGER,
|
|
a3ComBrgSrRDIp INTEGER,
|
|
a3ComBrgSrRDIpx INTEGER,
|
|
a3ComBrgSrRDLlc2 INTEGER,
|
|
a3ComBrgSrRDVines INTEGER
|
|
}
|
|
|
|
a3ComBrgSrRDPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the bridge port to which the
|
|
other objects in this entry apply."
|
|
::= { a3ComBrgSrRDEntry 1 }
|
|
|
|
a3ComBrgSrRDAppleTalk OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
appleTalk (1),
|
|
noAppleTalk (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether route discovery is initiated
|
|
for AppleTalke end system packets. This discovery
|
|
process occurs when a route to the end system does
|
|
not exist in the local source routing table. If this
|
|
is set to noAppleTalk, all AppleTalk end system
|
|
packets are sent as transparent frames."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: RouteDiscovery"
|
|
DEFVAL { noAppleTalk }
|
|
::= { a3ComBrgSrRDEntry 2 }
|
|
|
|
a3ComBrgSrRDClnp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clnp (1),
|
|
noClnp (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether route discovery is initiated
|
|
for CLNP end system packets. This discovery
|
|
process occurs when a route to the end system does
|
|
not exist in the local source routing table. If this
|
|
is set to noClnp, all CLNP end system packets are
|
|
sent as transparent frames."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: RouteDiscovery"
|
|
DEFVAL { noClnp }
|
|
::= { a3ComBrgSrRDEntry 3 }
|
|
|
|
a3ComBrgSrRDDecNet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
decNet (1),
|
|
noDecNet (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether route discovery is initiated
|
|
for DECNET end system packets. This discovery
|
|
process occurs when a route to the end system does
|
|
not exist in the local source routing table. If this
|
|
is set to noDecNet, all DECNET end system
|
|
packets are sent as transparent frames."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: RouteDiscovery"
|
|
DEFVAL { noDecNet }
|
|
::= { a3ComBrgSrRDEntry 4 }
|
|
|
|
a3ComBrgSrRDDlTest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dlTest (1),
|
|
noDlTest (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether route discovery is initiated
|
|
for DlTest end system packets. This discovery
|
|
process occurs when a route to the end system does
|
|
not exist in the local source routing table. If this
|
|
is set to noDlTest, all DlTest end system
|
|
packets are sent as transparent frames."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: RouteDiscovery"
|
|
DEFVAL { noDlTest }
|
|
::= { a3ComBrgSrRDEntry 5 }
|
|
|
|
a3ComBrgSrRDIp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ip (1),
|
|
noIp (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether route discovery is initiated
|
|
for IP end system packets. This discovery
|
|
process occurs when a route to the end system does
|
|
not exist in the local source routing table. If this
|
|
is set to noIp, all IP end system packets are sent
|
|
as transparent frames."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: RouteDiscovery"
|
|
DEFVAL { noIp }
|
|
::= { a3ComBrgSrRDEntry 6 }
|
|
|
|
a3ComBrgSrRDIpx OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipx (1),
|
|
noIpx (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether route discovery is initiated
|
|
for IPX end system packets. This discovery
|
|
process occurs when a route to the end system does
|
|
not exist in the local source routing table. If this
|
|
is set to noIpx, all IPX end system packets are sent
|
|
as transparent frames."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: RouteDiscovery"
|
|
DEFVAL { noIpx }
|
|
::= { a3ComBrgSrRDEntry 7 }
|
|
|
|
a3ComBrgSrRDLlc2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
llc2 (1),
|
|
noLlc2 (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether route discovery is initiated
|
|
for LLC2 end system packets. This discovery
|
|
process occurs when a route to the end system does
|
|
not exist in the local source routing table. If this
|
|
is set to noLlc2, all LLC2 end system packets are sent
|
|
as transparent frames."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: RouteDiscovery"
|
|
DEFVAL { noLlc2 }
|
|
::= { a3ComBrgSrRDEntry 8 }
|
|
|
|
a3ComBrgSrRDVines OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vines (1),
|
|
noVines (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether route discovery is initiated
|
|
for Vines end system packets. This discovery
|
|
process occurs when a route to the end system does
|
|
not exist in the local source routing table. If this
|
|
is set to noVines, all Vines end system
|
|
packets are sent as transparent frames."
|
|
REFERENCE
|
|
"NETBuilder Ref. Guide, SR Service parameter: RouteDiscovery"
|
|
DEFVAL { noVines }
|
|
::= { a3ComBrgSrRDEntry 9 }
|
|
|
|
|
|
|
|
|
|
a3ComBrgSrTunVRing OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used only by the Smart Filtering feature."
|
|
::= { a3ComBrgSr 7 }
|
|
|
|
a3ComBrgSrCNodeAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object is used only by the Smart Filtering feature."
|
|
::= { a3ComBrgSr 8 }
|
|
END
|