WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/a3com/A3COM-HUAWEI-NQA-MIB

2653 lines
94 KiB
Plaintext
Raw Blame History

-- =================================================================
-- Copyright (C) 2005 by HUAWEI-3COM TECHNOLOGIES. All rights reserved.
--
-- Description: Extended MIB File(extended from DISMAN-PING-MIB RFC2925)
-- Reference:
-- Version: V2.3
-- History:
-- V1.0 Lv zhenfeng, 2003.08, Initial Version
-- V1.1 2004-10-12 updated by gaolong
-- Import OBJECT-IDENTITY, Integer32, Counter32, Gauge32.
-- V1.2 Add new column objects
-- hwNqaResultsMaxDelaySD
-- hwNqaResultsMaxDelayDS
-- hwNqaResultsLostPacketRatio
-- under hwNqaResultsTable table by zhaoyujin, 20041101
-- Add new column objects
-- hwNqaJitterStatsAvePositivesSD
-- hwNqaJitterStatsAveNegativesSD
-- hwNqaJitterStatsAvePositivesDS
-- hwNqaJitterStatsAveNegativesDS
-- hwNqaJitterStatsPktLossUnknown
-- under hwNqaJitterStatsTable table by zhaoyujin, 20041101
-- revise words errors
-- V1.3 2004-12-25 updated by zhaoyujin and weixinzhe
-- Objects description updated
-- V1.4 2005-12-22 Modified by qiuchunxia and liqian
-- add hwNqaCtlHistoryKeptTime
-- add hwNqaCtlHistoryEnable
-- add hwNqaStatisticsResultsTable
-- add hwNqaGroupStatsJitterTable
-- add hwNqaStatisticsCtlTable
-- add hwNqaStatsMaxGroupNumber
-- remove definition of InetAddress, and import from INET-ADDRESS-MIB
-- V1.5 2006-03-03 Modified by jinyi and wangqingfeng
-- modified the description of hwNqaStatResRttSequenceErrors
-- modified the description of hwNqaResultsRttSequenceErrors
-- modified UNITS of some objects by jinyi
-- add hwNqaCtlICPIFAdvFactor, hwNqaCtlCodecType in hwNqaCtlTable
-- add hwNqaResultsPacketLateArrival in hwNqaResultsTable
-- add hwNqaJitterStatsOperOfICPIF and hwNqaJitterStatsOperOfMOS
-- in hwNqaJitterStatsTable
-- add hwNqaStatResPacketLateArrival in hwNqaStatisticsResultsTable
-- add hwNqaStatJitterMaxOfICPIF, hwNqaStatJitterMinOfICPIF
-- hwNqaStatJitterMaxOfMOS and hwNqaStatJitterMinOfMOS
-- in hwNqaGroupStatsJitterTable
-- rename subidentifier 5 of hwNqaStatisticsCtlEntry to
-- hwNqaCtlLifeTime by wangqingfeng
-- rename subidentifier 11 of hwNqaStatisticsResultsEntry to
-- hwNqaStatResInterval by wangqingfeng
-- V1.6 2006-05-12
-- rewrite this MIB with prefix "hwNqa".
-- V2.0 2006-08-14 Modified by zhangjun
-- change the name of root from "hwDismanPing" to "hwNqa"
-- modify some mistakes
-- V2.1 2006-08-22 Modified by qiuchunxia, dupengfei and shenjuanjuan
-- add hwNqaReactionTable and add hwNqaNotifications
-- V2.2 2007-03-08 Modified by zhouwenming
-- add hwNqaResultsRttSum, hwNqaResultsNumOfDelaySD, hwNqaResultsMinDelaySD,
-- hwNqaResultsSumDelaySD, hwNqaResultsSum2DelaySD, hwNqaResultsNumOfDelayDS,
-- hwNqaResultsMinDelayDS, hwNqaResultsSumDelayDS, hwNqaResultsSum2DelayDS
-- in hwNqaResultsTable
-- add hwNqaStatResRttSum, hwNqaStatResNumOfDelaySD, hwNqaStatResMinDelaySD,
-- hwNqaStatResSumDelaySD, hwNqaStatResSum2DelaySD, hwNqaStatResNumOfDelayDS,
-- hwNqaStatResMinDelayDS, hwNqaStatResSumDelayDS, hwNqaStatResSum2DelayDS,
-- hwNqaStatResMaxDelaySD, hwNqaStatResMaxDelayDS
-- in hwNqaStatisticsResultsTable
-- add jitterOwdSD, jitterOwdDS to hwNqaReactCheckedElement
-- in hwNqaReactionTable.
-- add hwNqaReactCheckedNum, hwNqaReactThresholdNum in hwNqaReactionTable
-- add hwNqaStatisticsReactionTable
-- V2.3 2007-04-25 Modified by zhouxingyue and zhouhaifeng
-- add icmpTimestamp in hwNqaCtlCodecType
-- remove size limit and DEFVAL in definition of hwNqaCtlStatisticsInterval.
-- modify type of below from Unsigned32 to Gauge32:
-- hwNqaStatResMinRtt, hwNqaStatResMaxRtt,hwNqaStatResAverageRtt,
-- hwNqaStatResInterval, hwNqaStatResLostPacketRatio, hwNqaStatResMinDelaySD,
-- hwNqaStatResMaxDelaySD,hwNqaStatResMinDelayDS, hwNqaStatResMaxDelayDS.
-- modify type of below from Unsigned32 to Counter32:
-- hwNqaStatResProbeResponses, hwNqaStatResSentProbes, hwNqaStatResRttSumOfSquares,
-- hwNqaStatResRttNumDisconnects, hwNqaStatResRttTimeouts, hwNqaStatResRttBusies,
-- hwNqaStatResRttNoConnections, hwNqaStatResRttDrops, hwNqaStatResRttSequenceErrors,
-- hwNqaStatResRttErrors, hwNqaStatResPacketLateArrival, hwNqaStatResRttSum,
-- hwNqaStatResNumOfDelaySD, hwNqaStatResSumDelaySD, hwNqaStatResSum2DelaySD,
-- hwNqaStatResNumOfDelayDS, hwNqaStatResSumDelayDS, hwNqaStatResSum2DelayDS,
-- hwNqaStatReactCheckedNum, hwNqaStatReactThresholdNum.
-- modify type of below from Gauge32 to Counter32:
-- hwNqaStatJitterNumOfPosSD, hwNqaStatJitterSumOfPosSD, hwNqaStatJitterSumOfSquarePosSD,
-- hwNqaStatJitterNumOfNegSD, hwNqaStatJitterSumOfNegSD, hwNqaStatJitterSumOfSquareNegSD,
-- hwNqaStatJitterNumOfPosDS, hwNqaStatJitterSumOfPosDS, hwNqaStatJitterSumOfSquarePosDS,
-- hwNqaStatJitterNumOfNegDS, hwNqaStatJitterSumOfNegDS, hwNqaStatJitterSumOfSquareNegDS,
-- hwNqaStatJitterPacketLossSD, hwNqaStatJitterPacketLossDS, hwNqaStatJitterPktLossUnknown.
-- =================================================================
A3COM-HUAWEI-NQA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,
OBJECT-IDENTITY, NOTIFICATION-TYPE, Integer32, Counter32, Gauge32
FROM SNMPv2-SMI
DateAndTime, DisplayString, RowStatus
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
huaweiDatacomm
FROM A3COM-HUAWEI-OID-MIB
pingCtlEntry, pingCtlOwnerIndex, pingCtlTestName, pingCtlType,
pingCtlTargetAddress, pingCtlTargetAddressType, pingCtlDescr
FROM DISMAN-PING-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB; -- RFC2571
hwNqa MODULE-IDENTITY
LAST-UPDATED "200608140000Z"
ORGANIZATION "Huawei Technologies Co., Ltd."
CONTACT-INFO
" R&D BeiJing, Huawei Technologies Co., Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com "
DESCRIPTION
"The private mib file includes the test information of the
device. It is supplementary for rfc2925.txt."
::= { huaweiDatacomm 28 }
hwNqaObjects OBJECT IDENTIFIER ::= { hwNqa 1 }
-- The registration node (point) for remote NQA(Network Quality Analysis) test
-- implementation types
hwNqaImplementationTypeDomains OBJECT IDENTIFIER ::= { hwNqa 2 }
hwNqaUdpEcho OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that an implementation is using the UDP based echo server.
Notes: The hwNqaCtlTargetPort and hwNqaCtlSourcePort need to be set,
while in the pingUdpEcho Node, hwNqaCtlTargetPort must be set to the
default value."
::= { hwNqaImplementationTypeDomains 1 }
hwNqaTcpconnect OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that an implementation is attempting to
connect to a TCP port in order to calculate a round
trip time.
Notes: The hwNqaCtlTargetPort and hwNqaCtlSourcePort need to be set,
while in the pingTcpConnectionAttempt Node, hwNqaCtlTargetPort must
be set to the default value."
::= { hwNqaImplementationTypeDomains 2 }
hwNqajitter OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that an implementation is using udp for packet transfers.
'jitter' will cause the NQA(Network Quality Analysis) application
to perform delay variance analysis."
::= { hwNqaImplementationTypeDomains 3 }
hwNqaHttp OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that an implementation is using udp for name resolution,
tcp connect and tcp data transfer mechanisms for HTTP data download
from a particular HTTP Server.
It causes the NQA application to perform a download of the object
specified in the URL."
::= { hwNqaImplementationTypeDomains 4 }
hwNqadlsw OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that an implementation is using tcp for sending keepalives.
'dlsw' will cause the NQA application to perform a keepalive operation
to measure the response time of a DLSw peer."
::= { hwNqaImplementationTypeDomains 5 }
hwNqadhcp OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that an implementation is using udp for sending dhcp
requests. 'dhcp' will cause the NQA application
to perform an IP Address lease request/teardown operation."
::= { hwNqaImplementationTypeDomains 6 }
hwNqaftp OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Indicates that an implementation is using tcp packet for ftp connect
and data transfer."
::= { hwNqaImplementationTypeDomains 7 }
-- MIB contains 3 groups
hwNqaMIBVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version string of this MIB.
The format will be: 'Version.Release.Patch: Description'
An instance likes: '1.0.0: Initial NQA MIB'
"
::= { hwNqaObjects 1 }
hwNqaCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the NQA Control Extend Table for providing, via SNMP,
the capability of performing network analysis operations at a
remote host."
::= { hwNqaObjects 2 }
hwNqaCtlEntry OBJECT-TYPE
SYNTAX HwNqaCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the hwNqaCtlTable. The operation of this
table is same as that of pingResultsTable."
AUGMENTS { pingCtlEntry }
::= { hwNqaCtlTable 1 }
HwNqaCtlEntry ::=
SEQUENCE {
hwNqaCtlTargetPort Integer32,
hwNqaCtlSourcePort Integer32,
hwNqaCtlTTL Integer32,
hwNqaCtlJitterAdminInterval Integer32,
hwNqaCtlJitterAdminNumPackets Integer32,
hwNqaCtlHttpOperationType INTEGER,
hwNqaCtlHttpOperationString DisplayString,
hwNqaCtlFtpOperationType INTEGER,
hwNqaCtlFtpUsername DisplayString,
hwNqaCtlFtpPassword DisplayString,
hwNqaCtlFtpOperationString DisplayString,
hwNqaCtlVPNInstance DisplayString,
hwNqaCtlHistoryKeptTime Integer32,
hwNqaCtlHistoryEnable INTEGER,
hwNqaCtlICPIFAdvFactor Integer32,
hwNqaCtlCodecType INTEGER
}
hwNqaCtlTargetPort OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination port that may be used by udpEcho,
tcpConnect and jitter probes."
DEFVAL { 0 }
::= { hwNqaCtlEntry 1 }
hwNqaCtlSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source port that may be used by all tests except
for dns and dlsw.
If no source port is specified, system will create
a random port as source port."
DEFVAL { 0 }
::= { hwNqaCtlEntry 2 }
hwNqaCtlTTL OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the value to store in the TTL Field in the IP packet used to
encapsulate the NQA probe."
DEFVAL { 20 }
::= { hwNqaCtlEntry 3 }
hwNqaCtlJitterAdminInterval OBJECT-TYPE
SYNTAX Integer32 (0..60000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time value in milliseconds that is an interval between two continuous
probes in jitter test.
This object is only used by jitter test."
DEFVAL { 20 }
::= { hwNqaCtlEntry 4 }
hwNqaCtlJitterAdminNumPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Packet number that specifys how many packets will be sent in
one jitter test.
This object is only used by jitter test."
DEFVAL { 10 }
::= { hwNqaCtlEntry 5 }
hwNqaCtlHttpOperationType OBJECT-TYPE
SYNTAX INTEGER{
get(1),
post(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Http operation type: get or post."
DEFVAL { get }
::= { hwNqaCtlEntry 6 }
hwNqaCtlHttpOperationString OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Http operation string. For example, if the http operation type is get,
the string will be url, home page and http version."
DEFVAL { "" }
::= { hwNqaCtlEntry 7 }
hwNqaCtlFtpOperationType OBJECT-TYPE
SYNTAX INTEGER{
get(1),
put(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ftp operation type."
DEFVAL { get }
::= { hwNqaCtlEntry 8 }
hwNqaCtlFtpUsername OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ftp username."
DEFVAL { "" }
::= { hwNqaCtlEntry 9 }
hwNqaCtlFtpPassword OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ftp password."
DEFVAL { "" }
::= { hwNqaCtlEntry 10 }
hwNqaCtlFtpOperationString OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ftp operation string. If the ftp operation type is get,
the string must be the file name which will be gotten from ftp server."
DEFVAL { "" }
::= { hwNqaCtlEntry 11 }
hwNqaCtlVPNInstance OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VPN name by which system finds route in the specified VPN
to send NQA probe packets."
DEFVAL { "" }
::= { hwNqaCtlEntry 12 }
hwNqaCtlHistoryKeptTime OBJECT-TYPE
SYNTAX Integer32(1..1440)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To indicate how long the history records will be saved
in the pingProbeHistoryTable table after the test stopped."
DEFVAL { 120 }
::= { hwNqaCtlEntry 13 }
hwNqaCtlHistoryEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1), --history will be recorded
disabled(2) --history will not be recorded
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To indicate whether the history should be recorded in the
PingProbeHistoryTable or not.
enabled(1) --history will be recorded
disabled(2) --history will not be recorded."
DEFVAL { disabled }
::= { hwNqaCtlEntry 14 }
hwNqaCtlICPIFAdvFactor OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) values.
Suggestion values:
|-----------------------------------|-------|
| Service |factor |
|-----------------------------------|-------|
|conventional wire-line | 0 |
|-----------------------------------|-------|
|mobility within Building | 5 |
|-----------------------------------|-------|
|mobility within geographical area | 10 |
|-----------------------------------|-------|
|access to hard-to-reach location | 20 |
|-----------------------------------|-------|
"
DEFVAL {0}
::= { hwNqaCtlEntry 15 }
hwNqaCtlCodecType OBJECT-TYPE
SYNTAX INTEGER
{
notDefined(1), -- no codec type is defined or codec is unknown
g711Alaw(2), -- uses G.711 A-Law
g711Ulaw(3), -- uses G.711 muHmm-Law
g729A(4), -- uses G.729A
icmpTimestamp(5) -- uses icmp timestamp packet type
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe."
DEFVAL { notDefined }
::= { hwNqaCtlEntry 16 }
-- NQA Test Results Table
hwNqaResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the NQA Results Extend Table for providing
the capability of performing NQA operations at a remote
host. The results of these operations are stored in the
hwNqaResultsTable. The operation of this table is same
as that of pingResultsTable."
::= { hwNqaObjects 3 }
hwNqaResultsEntry OBJECT-TYPE
SYNTAX HwNqaResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The operation of this table is same as that of pingResultsTable."
INDEX {
pingCtlOwnerIndex,
pingCtlTestName
}
::= { hwNqaResultsTable 1 }
HwNqaResultsEntry ::=
SEQUENCE {
hwNqaResultsRttNumDisconnects Unsigned32,
hwNqaResultsRttTimeouts Unsigned32,
hwNqaResultsRttBusies Unsigned32,
hwNqaResultsRttNoConnections Unsigned32,
hwNqaResultsRttDrops Unsigned32,
hwNqaResultsRttSequenceErrors Unsigned32,
hwNqaResultsRttStatsErrors Unsigned32,
hwNqaResultsMaxDelaySD Unsigned32,
hwNqaResultsMaxDelayDS Unsigned32,
hwNqaResultsLostPacketRatio Unsigned32,
hwNqaResultsPacketLateArrival Unsigned32,
hwNqaResultsRttSum Unsigned32,
hwNqaResultsNumOfDelaySD Unsigned32,
hwNqaResultsMinDelaySD Unsigned32,
hwNqaResultsSumDelaySD Unsigned32,
hwNqaResultsSum2DelaySD Unsigned32,
hwNqaResultsNumOfDelayDS Unsigned32,
hwNqaResultsMinDelayDS Unsigned32,
hwNqaResultsSumDelayDS Unsigned32,
hwNqaResultsSum2DelayDS Unsigned32
}
hwNqaResultsRttNumDisconnects OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA probe failed because
the destination became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero."
::= { hwNqaResultsEntry 1 }
hwNqaResultsRttTimeouts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA probe failed because the
probe timed out."
::= { hwNqaResultsEntry 2 }
hwNqaResultsRttBusies OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA probe failed because all
NQA tasks have been running.
If a new probe fails to start, the value of this object
is incremented. The next test will not start until the
next Frequency."
::= { hwNqaResultsEntry 3 }
hwNqaResultsRttNoConnections OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA probe failed because the probe
destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero."
::= { hwNqaResultsEntry 4 }
hwNqaResultsRttDrops OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA operation failed to initiated
for unavailibility of necessary internal resources."
::= { hwNqaResultsEntry 5 }
hwNqaResultsRttSequenceErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence."
::= { hwNqaResultsEntry 6 }
hwNqaResultsRttStatsErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of some other errors."
::= { hwNqaResultsEntry 7 }
hwNqaResultsMaxDelaySD OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal delay from source device to destination device.
Currently this value is only used for jitter test, and this
value must be 0 in other type test. In jitter test, if
destination system time is not valid, the SD delay may be set 0."
::= { hwNqaResultsEntry 8 }
hwNqaResultsMaxDelayDS OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal delay from destination device to source device.
Currently this value is only used for jitter test, and this
value is 0 in other type test. In jitter test, if destination
system time is not valid, the DS delay may be set 0."
::= { hwNqaResultsEntry 9 }
hwNqaResultsLostPacketRatio OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object reflects the drop rate of NQA test.
For example, this value is 30 that means source device only
had received 70% packets of total sent packets."
::= { hwNqaResultsEntry 10 }
hwNqaResultsPacketLateArrival OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates the number of the packets that
arrived after the timeout."
::= { hwNqaResultsEntry 11 }
hwNqaResultsRttSum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of round trip time."
::= { hwNqaResultsEntry 12 }
hwNqaResultsNumOfDelaySD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of delay from source to destination that are
successfully measured."
::= { hwNqaResultsEntry 13 }
hwNqaResultsMinDelaySD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way times from source to destination."
::= { hwNqaResultsEntry 14 }
hwNqaResultsSumDelaySD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way times from source to destination."
::= { hwNqaResultsEntry 15 }
hwNqaResultsSum2DelaySD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way times from source to destination."
::= { hwNqaResultsEntry 16 }
hwNqaResultsNumOfDelayDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of delay from destination to source that are
successfully measured."
::= { hwNqaResultsEntry 17 }
hwNqaResultsMinDelayDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way times from destination to source."
::= { hwNqaResultsEntry 18 }
hwNqaResultsSumDelayDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way times from destination to source."
::= { hwNqaResultsEntry 19 }
hwNqaResultsSum2DelayDS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way times from destination to source."
::= { hwNqaResultsEntry 20 }
-- =================================================================
-- Jitter Statistics Table
-- =================================================================
hwNqaJitterStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics table for latest jitter activity."
::= { hwNqaObjects 4 }
hwNqaJitterStatsEntry OBJECT-TYPE
SYNTAX HwNqaJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the statistics for the latest jitter activity.
This entry is created only if the pingCtlType is hwNqajitter."
INDEX {
pingCtlOwnerIndex,
pingCtlTestName
}
::= { hwNqaJitterStatsTable 1 }
HwNqaJitterStatsEntry ::= SEQUENCE
{
hwNqaJitterStatsNumOfRTT Counter32,
hwNqaJitterStatsMinOfPositivesSD Gauge32,
hwNqaJitterStatsMaxOfPositivesSD Gauge32,
hwNqaJitterStatsNumOfPositivesSD Gauge32,
hwNqaJitterStatsSumOfPositivesSD Gauge32,
hwNqaJitterStatsSum2PositivesSD Gauge32,
hwNqaJitterStatsMinOfNegativesSD Gauge32,
hwNqaJitterStatsMaxOfNegativesSD Gauge32,
hwNqaJitterStatsNumOfNegativesSD Gauge32,
hwNqaJitterStatsSumOfNegativesSD Gauge32,
hwNqaJitterStatsSum2NegativesSD Gauge32,
hwNqaJitterStatsMinOfPositivesDS Gauge32,
hwNqaJitterStatsMaxOfPositivesDS Gauge32,
hwNqaJitterStatsNumOfPositivesDS Gauge32,
hwNqaJitterStatsSumOfPositivesDS Gauge32,
hwNqaJitterStatsSum2PositivesDS Gauge32,
hwNqaJitterStatsMinOfNegativesDS Gauge32,
hwNqaJitterStatsMaxOfNegativesDS Gauge32,
hwNqaJitterStatsNumOfNegativesDS Gauge32,
hwNqaJitterStatsSumOfNegativesDS Gauge32,
hwNqaJitterStatsSum2NegativesDS Gauge32,
hwNqaJitterStatsPacketLossSD Gauge32,
hwNqaJitterStatsPacketLossDS Gauge32,
hwNqaJitterStatsAvePositivesSD Gauge32,
hwNqaJitterStatsAveNegativesSD Gauge32,
hwNqaJitterStatsAvePositivesDS Gauge32,
hwNqaJitterStatsAveNegativesDS Gauge32,
hwNqaJitterStatsPktLossUnknown Gauge32,
hwNqaJitterStatsOperOfICPIF Gauge32,
hwNqaJitterStatsOperOfMOS Gauge32
}
hwNqaJitterStatsNumOfRTT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received destination device responses with which
jitter test can reach round-trip time."
::= { hwNqaJitterStatsEntry 1 }
hwNqaJitterStatsMinOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the minimal positive jitter value from
source to destination in the jitter test."
::= { hwNqaJitterStatsEntry 2 }
hwNqaJitterStatsMaxOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the maximal positive jitter value from
source to destination in the jitter test."
::= { hwNqaJitterStatsEntry 3 }
hwNqaJitterStatsNumOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number that records positive jitter times from source to
destination in the jitter test.
The total number of the value of all positive jitters in packets
sent from source to destination."
::= { hwNqaJitterStatsEntry 4 }
hwNqaJitterStatsSumOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of positive jitter values from
source to destination in the jitter test."
::= { hwNqaJitterStatsEntry 5 }
hwNqaJitterStatsSum2PositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of square of positive jitter
values from source to destination in the jitter test."
::= { hwNqaJitterStatsEntry 6 }
hwNqaJitterStatsMinOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the minimal absolute values of
negative jitter value from source to destination in the jitter test."
::= { hwNqaJitterStatsEntry 7 }
hwNqaJitterStatsMaxOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the maximal absolute values of negative
jitter value from source to destination in the jitter test."
::= { hwNqaJitterStatsEntry 8 }
hwNqaJitterStatsNumOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number that records negative jitter times from source to
destination in the jitter test.
The total number of all negative jitter values in packets
sent from source to destination."
::= { hwNqaJitterStatsEntry 9 }
hwNqaJitterStatsSumOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of negative jitter values from
source to destination in the jitter test.
The total number of the value of all negative jitters in packets
sent from source to destination."
::= { hwNqaJitterStatsEntry 10 }
hwNqaJitterStatsSum2NegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of square of negative jitter
values from source to destination in the jitter test."
::= { hwNqaJitterStatsEntry 11 }
hwNqaJitterStatsMinOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the minimal positive jitter value from
destination to source in the jitter test."
::= { hwNqaJitterStatsEntry 12 }
hwNqaJitterStatsMaxOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the maximal positive jitter value from
destination to source in the jitter test."
::= { hwNqaJitterStatsEntry 13 }
hwNqaJitterStatsNumOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number that records positive jitter times from destination to
source in the jitter test."
::= { hwNqaJitterStatsEntry 14 }
hwNqaJitterStatsSumOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of positive jitter values from
destination to source in the jitter test."
::= { hwNqaJitterStatsEntry 15 }
hwNqaJitterStatsSum2PositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of square of positive jitter
values from destination to source in the jitter test."
::= { hwNqaJitterStatsEntry 16 }
hwNqaJitterStatsMinOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the minimal absolute values of negative
jitter value from destination to source in the jitter test."
::= { hwNqaJitterStatsEntry 17 }
hwNqaJitterStatsMaxOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the maximal absolute values of negative
jitter value from destination to source in the jitter test."
::= { hwNqaJitterStatsEntry 18 }
hwNqaJitterStatsNumOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number that records negative jitter times from destination to source
in the jitter test."
::= { hwNqaJitterStatsEntry 19 }
hwNqaJitterStatsSumOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of negative jitter values from
destination to source in the jitter test."
::= { hwNqaJitterStatsEntry 20 }
hwNqaJitterStatsSum2NegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of square of negative jitter
values from destination to source in the jitter test."
::= { hwNqaJitterStatsEntry 21 }
hwNqaJitterStatsPacketLossSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lost packets number sent from source to destination."
::= { hwNqaJitterStatsEntry 22 }
hwNqaJitterStatsPacketLossDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lost packets number sent from destination to source."
::= { hwNqaJitterStatsEntry 23 }
hwNqaJitterStatsAvePositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the average positive jitter value
from source to destination."
::= { hwNqaJitterStatsEntry 24 }
hwNqaJitterStatsAveNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the average negative jitter value
from source to destination."
::= { hwNqaJitterStatsEntry 25 }
hwNqaJitterStatsAvePositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the average positive jitter value
from destination to source."
::= { hwNqaJitterStatsEntry 26 }
hwNqaJitterStatsAveNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the average negative jitter value
from destination to source."
::= { hwNqaJitterStatsEntry 27 }
hwNqaJitterStatsPktLossUnknown OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which is lost with unknown reason."
::= { hwNqaJitterStatsEntry 28 }
hwNqaJitterStatsOperOfICPIF OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ICPIF (Calculated Planning Impairment Factor) value for the latest
jitter test."
::= { hwNqaJitterStatsEntry 29 }
hwNqaJitterStatsOperOfMOS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MOS (Mean Opinion Score) value for the latest jitter test."
::= { hwNqaJitterStatsEntry 30 }
hwNqaAgentEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable NQA agent function."
DEFVAL { disable }
::= { hwNqaObjects 5 }
-- =================================================================
-- Tcp server configuration information Statistics Table
-- =================================================================
hwNqaTcpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaTcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of NQA tcp server
configuration information."
::= { hwNqaObjects 6 }
hwNqaTcpServerEntry OBJECT-TYPE
SYNTAX HwNqaTcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of NQA tcp server
configuration information.
This entry includes not only the tcp server ip address
but also the tcp server port."
INDEX {
hwNqaTcpServerIpAddress,
hwNqaTcpServerPort
}
::= { hwNqaTcpServerTable 1 }
HwNqaTcpServerEntry ::= SEQUENCE
{
hwNqaTcpServerIpAddress InetAddress,
hwNqaTcpServerPort Integer32,
hwNqaTcpServerRowStatus RowStatus
}
hwNqaTcpServerIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tcp server's ip address."
DEFVAL { ''H }
::= { hwNqaTcpServerEntry 1 }
hwNqaTcpServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tcp server's port number."
DEFVAL { 0 }
::= { hwNqaTcpServerEntry 2 }
hwNqaTcpServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"hwNqaTcpServerIpAddress and hwNqaTcpServerPort
must be set during a creation operation."
REFERENCE
"RFC 2579"
::= { hwNqaTcpServerEntry 3 }
hwNqaUdpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaUdpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status of NQA udp server configuration information."
::= { hwNqaObjects 7 }
hwNqaUdpServerEntry OBJECT-TYPE
SYNTAX HwNqaUdpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes not only the udp server ip address
but also the udp server udp port."
INDEX {
hwNqaUdpServerIpAddress,
hwNqaUdpServerPort
}
::= { hwNqaUdpServerTable 1 }
HwNqaUdpServerEntry ::= SEQUENCE
{
hwNqaUdpServerIpAddress InetAddress,
hwNqaUdpServerPort Integer32,
hwNqaUdpServerRowStatus RowStatus
}
hwNqaUdpServerIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Udp server's ip address."
DEFVAL { ''H }
::= { hwNqaUdpServerEntry 1 }
hwNqaUdpServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Udp server's port number."
DEFVAL { 0 }
::= { hwNqaUdpServerEntry 2 }
hwNqaUdpServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"hwNqaUdpServerIpAddress and hwNqaUdpServerPort
must be set during a creation operation."
REFERENCE
"RFC 2579"
::= { hwNqaUdpServerEntry 3 }
hwNqaServerEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable NQA server function."
DEFVAL { disable }
::= { hwNqaObjects 8 }
hwNqaStatsMaxGroupNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number saved per group. The maximum value of
hwNqaCtlStatisticsGroupNumber can not exceed the value of
this object."
::= { hwNqaObjects 9 }
hwNqaStatisticsCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaStatisticsCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the NQA statistics control table for providing, via SNMP,
the capability of performing NQA operations at a remote host.
The results of these operations are stored in the
hwNqaStatisticsResultsTable and the hwNqaGroupStatsJitterTable."
::= { hwNqaObjects 10 }
hwNqaStatisticsCtlEntry OBJECT-TYPE
SYNTAX HwNqaStatisticsCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the hwNqaStatisticsCtlTable.
The hwNqaStatisticsCtlTable has the same index as the
pingCtlTable in order for a hwNqaStatisticsCtlTable to
correspond to the pingCtlEntry."
AUGMENTS { pingCtlEntry }
::= { hwNqaStatisticsCtlTable 1 }
HwNqaStatisticsCtlEntry ::=
SEQUENCE
{
hwNqaCtlStatisticsInterval Unsigned32,
hwNqaCtlStatisticsGroupNumber Unsigned32,
hwNqaCtlStatisticsKeptTime Unsigned32,
hwNqaCtlBeginTime DateAndTime,
hwNqaCtlLifeTime Unsigned32
}
hwNqaCtlStatisticsInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Statistic information will be calculated after the time that is
the value of hwNqaCtlStatisticsInterval."
::= { hwNqaStatisticsCtlEntry 1 }
hwNqaCtlStatisticsGroupNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object indicates the number of group saved.
The length of this object is from 1 to hwNqaStatsMaxGroupNumber."
DEFVAL { 2 }
::= { hwNqaStatisticsCtlEntry 2 }
hwNqaCtlStatisticsKeptTime OBJECT-TYPE
SYNTAX Unsigned32(1..1440)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To indicate how long the statistic information will be saved after
the test stops."
DEFVAL { 120 }
::= { hwNqaStatisticsCtlEntry 3 }
hwNqaCtlBeginTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time at which the type-specified test will start."
::= { hwNqaStatisticsCtlEntry 4 }
hwNqaCtlLifeTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To indicate how long the type-specified test will last."
DEFVAL { 0 }
::= { hwNqaStatisticsCtlEntry 5 }
hwNqaStatisticsResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaStatisticsResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the NQA statistics results table for providing
the capability of performing NQA operations at a remote
host. The statistics results of these operations in a statistic cycle
are stored in the hwNqaStatisticsResultsTable. The statistic cycle is
the value of hwNqaCtlStatisticsInterval.
The first two index identify the pingCtlEntry that the probe statistics
result (HwNqaStatisticsResultsEntry) belongs to."
::= { hwNqaObjects 11 }
hwNqaStatisticsResultsEntry OBJECT-TYPE
SYNTAX HwNqaStatisticsResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the hwNqaStatisticsResultsTable. The
hwNqaStatisticsResultsTable has the same index as the
pingCtlTable in order for a hwNqaStatisticsResultsEntry to
correspond to the pingCtlEntry that caused it to be created."
INDEX
{
pingCtlOwnerIndex,
pingCtlTestName,
hwNqaStatResIndex
}
::= { hwNqaStatisticsResultsTable 1 }
HwNqaStatisticsResultsEntry ::=
SEQUENCE
{
hwNqaStatResIndex Unsigned32,
hwNqaStatResIpTargetAddressType InetAddressType,
hwNqaStatResIpTargetAddress InetAddress,
hwNqaStatResMinRtt Gauge32,
hwNqaStatResMaxRtt Gauge32,
hwNqaStatResAverageRtt Gauge32,
hwNqaStatResProbeResponses Counter32,
hwNqaStatResSentProbes Counter32,
hwNqaStatResRttSumOfSquares Counter32,
hwNqaStatResStartTime DateAndTime,
hwNqaStatResInterval Gauge32,
hwNqaStatResRttNumDisconnects Counter32,
hwNqaStatResRttTimeouts Counter32,
hwNqaStatResRttBusies Counter32,
hwNqaStatResRttNoConnections Counter32,
hwNqaStatResRttDrops Counter32,
hwNqaStatResRttSequenceErrors Counter32,
hwNqaStatResRttErrors Counter32,
hwNqaStatResLostPacketRatio Gauge32,
hwNqaStatResPacketLateArrival Counter32,
hwNqaStatResRttSum Counter32,
hwNqaStatResNumOfDelaySD Counter32,
hwNqaStatResMinDelaySD Gauge32,
hwNqaStatResMaxDelaySD Gauge32,
hwNqaStatResSumDelaySD Counter32,
hwNqaStatResSum2DelaySD Counter32,
hwNqaStatResNumOfDelayDS Counter32,
hwNqaStatResMinDelayDS Gauge32,
hwNqaStatResMaxDelayDS Gauge32,
hwNqaStatResSumDelayDS Counter32,
hwNqaStatResSum2DelayDS Counter32
}
hwNqaStatResIndex OBJECT-TYPE
SYNTAX Unsigned32(1..'ffffffff'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created when the statistics
result of a NQA probe is determined.
An implementation MUST start assigning
hwNqaStatResIndex values at 1 and wrap after
exceeding the maximum possible value as defined by
the limit of this object ('ffffffff'h)."
::= { hwNqaStatisticsResultsEntry 1 }
hwNqaStatResIpTargetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of address stored
in the corresponding hwNqaStatResIpTargetAddress
object."
DEFVAL { unknown }
::= { hwNqaStatisticsResultsEntry 2 }
hwNqaStatResIpTargetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represent the host address to be used at a remote host for
performing a network analysis operation."
DEFVAL { ''H }
::= { hwNqaStatisticsResultsEntry 3 }
hwNqaStatResMinRtt OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received."
::= { hwNqaStatisticsResultsEntry 4 }
hwNqaStatResMaxRtt OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received."
::= { hwNqaStatisticsResultsEntry 5 }
hwNqaStatResAverageRtt OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average NQA probe round-trip-time (RTT)."
::= { hwNqaStatisticsResultsEntry 6 }
hwNqaStatResProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of responses received. The value of this object
MUST be reported as 0 when no probe responses have been
received."
::= { hwNqaStatisticsResultsEntry 7 }
hwNqaStatResSentProbes OBJECT-TYPE
SYNTAX Counter32
UNITS "probes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent."
::= { hwNqaStatisticsResultsEntry 8 }
hwNqaStatResRttSumOfSquares OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all NQA
responses received. The value of this object MUST
be reported as 0 when no NQA responses have been
received."
::= { hwNqaStatisticsResultsEntry 9 }
hwNqaStatResStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the start time of the statistic."
::= { hwNqaStatisticsResultsEntry 10 }
hwNqaStatResInterval OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the interval between two times of statistic."
::= { hwNqaStatisticsResultsEntry 11 }
hwNqaStatResRttNumDisconnects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA probe failed because the destination
became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero."
::= { hwNqaStatisticsResultsEntry 12 }
hwNqaStatResRttTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a probe failed because the probe timed out."
::= { hwNqaStatisticsResultsEntry 13 }
hwNqaStatResRttBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA probe failed because
errors related to sockets."
::= { hwNqaStatisticsResultsEntry 14 }
hwNqaStatResRttNoConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA probe failed because the
probe destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero."
::= { hwNqaStatisticsResultsEntry 15 }
hwNqaStatResRttDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a NQA operation failed to initiate
for unavailibility of necessary internal resources."
::= { hwNqaStatisticsResultsEntry 16 }
hwNqaStatResRttSequenceErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence."
::= { hwNqaStatisticsResultsEntry 17 }
hwNqaStatResRttErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of other errors."
::= { hwNqaStatisticsResultsEntry 18 }
hwNqaStatResLostPacketRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 30, that means source device
only had received 70 percent packets of total sent packets."
::= { hwNqaStatisticsResultsEntry 19 }
hwNqaStatResPacketLateArrival OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object reflects the number of the packets that
arrived after the timeout."
::= { hwNqaStatisticsResultsEntry 20 }
hwNqaStatResRttSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the sum of the squares for all NQA
responses received during the test lifetime. The value of this object
MUST be reported as 0 when no NQA responses have been received."
::= { hwNqaStatisticsResultsEntry 21 }
hwNqaStatResNumOfDelaySD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of one way times from source to destination that are
successfully measured."
::= { hwNqaStatisticsResultsEntry 22 }
hwNqaStatResMinDelaySD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum one way times from source to destination."
::= { hwNqaStatisticsResultsEntry 23 }
hwNqaStatResMaxDelaySD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum one way times from source to destination."
::= { hwNqaStatisticsResultsEntry 24 }
hwNqaStatResSumDelaySD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way times from source to destination."
::= { hwNqaStatisticsResultsEntry 25 }
hwNqaStatResSum2DelaySD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way times from source to destination."
::= { hwNqaStatisticsResultsEntry 26 }
hwNqaStatResNumOfDelayDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of one way times from destination to source that are
successfully measured."
::= { hwNqaStatisticsResultsEntry 27 }
hwNqaStatResMinDelayDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum one way times from destination to source."
::= { hwNqaStatisticsResultsEntry 28 }
hwNqaStatResMaxDelayDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum one way times from destination to source."
::= { hwNqaStatisticsResultsEntry 29 }
hwNqaStatResSumDelayDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way times from destination to source."
::= { hwNqaStatisticsResultsEntry 30 }
hwNqaStatResSum2DelayDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way times from destination to source."
::= { hwNqaStatisticsResultsEntry 31 }
-- =================================================================
-- hwNqaGroupStatsJitterTable
-- =================================================================
hwNqaGroupStatsJitterTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaGroupStatsJitterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Test Group Statistic table for jitter activity in a statistic cycle.
The statistic cycle is the value of hwNqaCtlStatisticsInterval.
The first two index identify the pingCtlEntry that a probe statistics
result (HwNqaStatisticsResultsEntry) belongs to."
::= { hwNqaObjects 12 }
hwNqaGroupStatsJitterEntry OBJECT-TYPE
SYNTAX HwNqaGroupStatsJitterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the group statistic information for jitter activity.
This entry is created only if the pingCtlType is hwNqajitter."
INDEX
{
pingCtlOwnerIndex,
pingCtlTestName,
hwNqaStatJitterIndex
}
::= { hwNqaGroupStatsJitterTable 1 }
HwNqaGroupStatsJitterEntry ::=
SEQUENCE
{
hwNqaStatJitterIndex Unsigned32,
hwNqaStatJitterMinOfPosSD Gauge32,
hwNqaStatJitterMaxOfPosSD Gauge32,
hwNqaStatJitterNumOfPosSD Counter32,
hwNqaStatJitterSumOfPosSD Counter32,
hwNqaStatJitterSumOfSquarePosSD Counter32,
hwNqaStatJitterMinOfNegSD Gauge32,
hwNqaStatJitterMaxOfNegSD Gauge32,
hwNqaStatJitterNumOfNegSD Counter32,
hwNqaStatJitterSumOfNegSD Counter32,
hwNqaStatJitterSumOfSquareNegSD Counter32,
hwNqaStatJitterMinOfPosDS Gauge32,
hwNqaStatJitterMaxOfPosDS Gauge32,
hwNqaStatJitterNumOfPosDS Counter32,
hwNqaStatJitterSumOfPosDS Counter32,
hwNqaStatJitterSumOfSquarePosDS Counter32,
hwNqaStatJitterMinOfNegDS Gauge32,
hwNqaStatJitterMaxOfNegDS Gauge32,
hwNqaStatJitterNumOfNegDS Counter32,
hwNqaStatJitterSumOfNegDS Counter32,
hwNqaStatJitterSumOfSquareNegDS Counter32,
hwNqaStatJitterPacketLossSD Counter32,
hwNqaStatJitterPacketLossDS Counter32,
hwNqaStatJitterAvePosSD Gauge32,
hwNqaStatJitterAveNegSD Gauge32,
hwNqaStatJitterAvePosDS Gauge32,
hwNqaStatJitterAveNegDS Gauge32,
hwNqaStatJitterPktLossUnknown Counter32,
hwNqaStatJitterMaxOfICPIF Gauge32,
hwNqaStatJitterMinOfICPIF Gauge32,
hwNqaStatJitterMaxOfMOS Gauge32,
hwNqaStatJitterMinOfMOS Gauge32
}
hwNqaStatJitterIndex OBJECT-TYPE
SYNTAX Unsigned32(1..'ffffffff'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created when the statistic
result of a NQA probe in a statistic cycle is determined.
An implementation MUST start assigning hwNqaStatJitterIndex
values at 1 and wrap after exceeding the maximum possible
value as defined by the limit of this object ('ffffffff'h)."
::= { hwNqaGroupStatsJitterEntry 1 }
hwNqaStatJitterMinOfPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the minimal positive jitter value
from source to destination in jitter test."
::= { hwNqaGroupStatsJitterEntry 2 }
hwNqaStatJitterMaxOfPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the maximal positive jitter value
from source to destination in the jitter test."
::= { hwNqaGroupStatsJitterEntry 3 }
hwNqaStatJitterNumOfPosSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number that records positive jitter times from source to
destination in the jitter test.
The total number of all positive jitter values in packets sent
from source to destination."
::= { hwNqaGroupStatsJitterEntry 4 }
hwNqaStatJitterSumOfPosSD OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of positive jitter values
from source to destination in the jitter test."
::= { hwNqaGroupStatsJitterEntry 5 }
hwNqaStatJitterSumOfSquarePosSD OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of square of positive jitter
values from source to destination in the jitter test."
::= { hwNqaGroupStatsJitterEntry 6 }
hwNqaStatJitterMinOfNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the minimal absolute values of
negative jitter value from source to destination in the jitter test."
::= { hwNqaGroupStatsJitterEntry 7 }
hwNqaStatJitterMaxOfNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the maximal absolute values of negative
jitter value from source to destination in the jitter test."
::= { hwNqaGroupStatsJitterEntry 8 }
hwNqaStatJitterNumOfNegSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number that records negative jitter times from source to
destination in the jitter test.
The total number of all negative jitter values sent from source to
destination."
::= { hwNqaGroupStatsJitterEntry 9 }
hwNqaStatJitterSumOfNegSD OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of negative jitter values
from source to destination in the jitter test."
::= { hwNqaGroupStatsJitterEntry 10 }
hwNqaStatJitterSumOfSquareNegSD OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of square of negative jitter
values from source to destination in the jitter test."
::= { hwNqaGroupStatsJitterEntry 11 }
hwNqaStatJitterMinOfPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the minimal positive jitter value
from destination to source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 12 }
hwNqaStatJitterMaxOfPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the maximal positive jitter value
from destination to source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 13 }
hwNqaStatJitterNumOfPosDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number that records positive jitter times from destination to
source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 14 }
hwNqaStatJitterSumOfPosDS OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of positive jitter values
from destination to source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 15 }
hwNqaStatJitterSumOfSquarePosDS OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of square of positive jitter
values destination to source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 16 }
hwNqaStatJitterMinOfNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the minimal absolute values of negative
jitter value from destination to source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 17 }
hwNqaStatJitterMaxOfNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the maximal absolute values of negative
jitter value from destination to source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 18 }
hwNqaStatJitterNumOfNegDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number that records negative jitter times from destination to
source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 19 }
hwNqaStatJitterSumOfNegDS OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of negative jitter values
from destination to source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 20 }
hwNqaStatJitterSumOfSquareNegDS OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the sum of square of negative jitter
values from destination to source in the jitter test."
::= { hwNqaGroupStatsJitterEntry 21 }
hwNqaStatJitterPacketLossSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lost packets number sent from source to destination."
::= { hwNqaGroupStatsJitterEntry 22 }
hwNqaStatJitterPacketLossDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lost packets number sent from destination to source."
::= { hwNqaGroupStatsJitterEntry 23 }
hwNqaStatJitterAvePosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the average positive jitter value
from source to destination."
::= { hwNqaGroupStatsJitterEntry 24 }
hwNqaStatJitterAveNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the average negative jitter value
from source to destination."
::= { hwNqaGroupStatsJitterEntry 25 }
hwNqaStatJitterAvePosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the average positive jitter value
from destination to source."
::= { hwNqaGroupStatsJitterEntry 26 }
hwNqaStatJitterAveNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of time that records the average negative jitter value
from destination to source."
::= { hwNqaGroupStatsJitterEntry 27 }
hwNqaStatJitterPktLossUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which is lost with unknown reason."
::= { hwNqaGroupStatsJitterEntry 28 }
hwNqaStatJitterMaxOfICPIF OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all ICPIF values in a statistic cycle for jitter test."
::= { hwNqaGroupStatsJitterEntry 29 }
hwNqaStatJitterMinOfICPIF OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all ICPIF values in a statistic cycle for jitter test."
::= { hwNqaGroupStatsJitterEntry 30 }
hwNqaStatJitterMaxOfMOS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all MOS values in a statistic cycle for jitter test."
::= { hwNqaGroupStatsJitterEntry 31 }
hwNqaStatJitterMinOfMOS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all MOS values in a statistic cycle for jitter test."
::= { hwNqaGroupStatsJitterEntry 32 }
-- Reaction Table
hwNqaReactionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaReactionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of NQA test monitoring notification and
reaction configuration definitions.
An entry is removed from this table when its
corresponding pingCtlEntry is deleted."
::= { hwNqaObjects 13 }
hwNqaReactionEntry OBJECT-TYPE
SYNTAX HwNqaReactionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the hwNqaReactionTable.The first two index
elements identify the pingCtlEntry that a hwNqaReactItemIndex
belongs to. The third index element selects a single reaction."
INDEX
{
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex
}
::= { hwNqaReactionTable 1 }
HwNqaReactionEntry ::=
SEQUENCE
{
hwNqaReactOwnerIndex SnmpAdminString,
hwNqaReactTestName SnmpAdminString,
hwNqaReactItemIndex Unsigned32,
hwNqaReactCheckedElement INTEGER,
hwNqaReactThresholdUpperLimit Unsigned32,
hwNqaReactThresholdLowerLimit Unsigned32,
hwNqaReactThresholdType INTEGER,
hwNqaReactThresholdConsecNum Unsigned32,
hwNqaReactThresholdAccumNum Unsigned32,
hwNqaReactActionType INTEGER,
hwNqaReactCurrentStatus INTEGER,
hwNqaReactRowStatus RowStatus,
hwNqaReactCheckedNum Unsigned32,
hwNqaReactThresholdNum Unsigned32
}
hwNqaReactOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The first index of hwNqaReactionTable, it is the same as
pingCtlOwnerIndex in pingCtlTable. hwNqaReactOwnerIndex and
hwNqaReactTestName identify an existed test."
::= { hwNqaReactionEntry 1 }
hwNqaReactTestName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The second index of hwNqaReactionTable, it is the same as
pingCtlTestName in pingCtlTable. hwNqaReactOwnerIndex and
hwNqaReactTestName identify an existed test."
::= { hwNqaReactionEntry 2 }
hwNqaReactItemIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The third index of hwNqaReactionTable, it definitely
identifies one of the reaction configurations for a test."
::= { hwNqaReactionEntry 3 }
hwNqaReactCheckedElement OBJECT-TYPE
SYNTAX INTEGER {
probetime(1),
probefailure(2),
jitterrtt(3),
jitterpacketloss(4),
jittersd(5),
jitterds(6),
icpif(7),
mos(8),
jitterOwdSD(9),
jitterOwdDS(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A list of reaction condition type.
'probetime' and 'probefailure' are valid when pingCtlType of
the test is not hwNqajitter.
'jitterOwdSD': one way time from source to destination in
jitter test.
'jitterOwdDS': one way time from destination to source in
jitter test.
'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds',
'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType
of the test is hwNqajitter.
'icpif' and 'mos' are valid when pingCtlType of the test is
hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'."
::= { hwNqaReactionEntry 4 }
hwNqaReactThresholdUpperLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines an administrative upper-threshold value for
hwNqaReactCheckedElement.
The value of this object is zero if hwNqaReactCheckedElement is
specified as 'jitterpacketloss' and 'probefailure'."
DEFVAL { 0 }
::= { hwNqaReactionEntry 5 }
hwNqaReactThresholdLowerLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines an administrative lower-threshold value for
hwNqaReactCheckedElement.
The value of hwNqaReactThresholdLowerLimit should be equal or less
than the value of hwNqaReactThresholdUpperLimit.
The value of this object is zero if hwNqaReactCheckedElement is
specified as 'jitterpacketloss' and 'probefailure'."
DEFVAL { 0 }
::= { hwNqaReactionEntry 6 }
hwNqaReactThresholdType OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
average(1),
consecutive(2),
accumulative(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the reaction threshold types.
invalid(0): Invalid value.
average(1): If reaction threshold type is average and the average
value of watched operation exceeds threshold limit,
an action specified in hwNqaReactActionType is
generated when hwNqaReactCurrentStatus changes.
consecutive(2): If reaction threshold type is consecutive and
the times of watched operation consecutively exceeds
the limit specified by hwNqaReactThresholdConsecNum,
an action specified in hwNqaReactActionType is
generated when hwNqaReactCurrentStatus changes.
accumulative(3): If reaction threshold type is accumulative and
the times of watched operation accumulatively exceeds
the limit specified by hwNqaReactThresholdAccumNum,
an action specified in hwNqaReactActionType is
generated when hwNqaReactCurrentStatus changes.
If reaction threshold type is not configured, the value of this
object is 'invalid'."
::= { hwNqaReactionEntry 7 }
hwNqaReactThresholdConsecNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines a consecutive threshold limit.
The value is zero when hwNqaReactThresholdType
is not 'consecutive'."
DEFVAL { 0 }
::= { hwNqaReactionEntry 8 }
hwNqaReactThresholdAccumNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines an accumulative threshold limit.
The value is zero when the hwNqaReactThresholdType
is not 'accumulative'."
DEFVAL { 0 }
::= { hwNqaReactionEntry 9 }
hwNqaReactActionType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
trapOnly(1),
triggerOnly(2),
trapAndTrigger(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the type of reaction to generate if the specified
violation type occurs for the monitored element:
none - No reaction is generated
trapOnly - A trap is generated
triggerOnly - All trigger actions defined for this
entry are generated
trapAndTrigger - Both a trap and all trigger actions
are generated "
DEFVAL { none }
::= { hwNqaReactionEntry 10 }
hwNqaReactCurrentStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
overThreshold(2),
belowThreshold(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the current status of this reaction entry:
invalid - Specifies the reaction entry status is uncertain.
overThreshold - Specifies the reaction entry has met
the hwNqaReactThresholdType and the
threshold value.
belowThreshold - Specifies the reaction entry has
disobeyed the hwNqaReactThresholdType
and the threshold value."
::= { hwNqaReactionEntry 11 }
hwNqaReactRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created and deleted
in the hwNqaReactionTable.
Creation of an entry in this table results in a new set of reaction
configurations which take effect immediately.
Deletion of an entry in this table results in corresponding reaction
configurations are being deleted and stop taking effect."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual
Conventions for SMIv2.'"
::= { hwNqaReactionEntry 12 }
hwNqaReactCheckedNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of checked element samples that are monitored."
DEFVAL { 0 }
::= { hwNqaReactionEntry 13 }
hwNqaReactThresholdNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of checked element samples that are over threshold."
DEFVAL { 0 }
::= { hwNqaReactionEntry 14 }
-- Statistics Reaction Table
hwNqaStatisticsReactionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwNqaStatisticsReactionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of NQA test monitoring notification and
reaction configuration definitions.
An entry is removed from this table when its
corresponding pingCtlEntry is deleted."
::= { hwNqaObjects 14 }
hwNqaStatisticsReactionEntry OBJECT-TYPE
SYNTAX HwNqaStatisticsReactionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the hwNqaStatisticsReactionTable. The
first two index elements identify the pingCtlEntry that a
hwNqaReactItemIndex belongs to. The third index element
identifies an entry in the hwNqaStatisticsResultsTable.
The forth index element selects a single reaction."
INDEX
{
hwNqaStatReactOwnerIndex,
hwNqaStatReactTestName,
hwNqaStatReactIndex,
hwNqaStatReactItemIndex
}
::= { hwNqaStatisticsReactionTable 1 }
HwNqaStatisticsReactionEntry ::=
SEQUENCE
{
hwNqaStatReactOwnerIndex SnmpAdminString,
hwNqaStatReactTestName SnmpAdminString,
hwNqaStatReactIndex Unsigned32,
hwNqaStatReactItemIndex Unsigned32,
hwNqaStatReactCheckedNum Counter32,
hwNqaStatReactThresholdNum Counter32
}
hwNqaStatReactOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The first index of hwNqaStatisticsReactionTable, it is the same
as pingCtlOwnerIndex in pingCtlTable."
::= { hwNqaStatisticsReactionEntry 1 }
hwNqaStatReactTestName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The second index of hwNqaStatisticsReactionTable, it is the same
as pingCtlTestName in pingCtlTable."
::= { hwNqaStatisticsReactionEntry 2 }
hwNqaStatReactIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The third index of hwNqaStatisticsReactionTable. An entry in
this table is created when the statistics result of a NQA probe
is determined.
An implementation MUST start assigning hwNqaStatResIndex values
at 1 and wrap after exceeding the maximum possible value as
defined by the limit of this object ('ffffffff'h)."
DEFVAL { 0 }
::= { hwNqaStatisticsReactionEntry 3 }
hwNqaStatReactItemIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The forth index of hwNqaStatisticsReactionTable, it definitely
identifies one of the reaction configurations for a test"
DEFVAL { 0 }
::= { hwNqaStatisticsReactionEntry 4 }
hwNqaStatReactCheckedNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of checked element samples that are monitored."
DEFVAL { 0 }
::= { hwNqaStatisticsReactionEntry 5 }
hwNqaStatReactThresholdNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of checked element samples that are over threshold."
DEFVAL { 0 }
::= { hwNqaStatisticsReactionEntry 6 }
-- Notification Definition section
hwNqaNotifications OBJECT IDENTIFIER ::= { hwNqa 3 }
hwNqaProbeTimeOverThreshold NOTIFICATION-TYPE
OBJECTS {
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex,
pingCtlTargetAddressType,
pingCtlTargetAddress,
pingCtlType,
pingCtlDescr,
hwNqaReactThresholdType,
hwNqaReactCurrentStatus
}
STATUS current
DESCRIPTION
"It is generated when the value of hwNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. Probe time(equals to RTT for some type of tests) is not in
the range hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit.
2. The probe time is accumulatively not in the range
hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit for a number of times
specified in hwNqaReactThresholdAccumNum.
3. The probe time is consecutively in the range
hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit for a number of times
specified in hwNqaReactThresholdConsecNum.
This notification is valid only when hwNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hwNqajitter."
::= { hwNqaNotifications 1 }
hwNqaJitterRTTOverThreshold NOTIFICATION-TYPE
OBJECTS {
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex,
pingCtlTargetAddressType,
pingCtlTargetAddress,
pingCtlType,
pingCtlDescr,
hwNqaReactThresholdType,
hwNqaReactCurrentStatus
}
STATUS current
DESCRIPTION
"It is generated when the value of hwNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average NQA round-trip-time (RTT) of jitter packets
is not in the range hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit.
2. The RTT of jitter packets is accumulatively not in the range
hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit for a number of times specified
in hwNqaReactThresholdAccumNum in one test.
This notification is valid only when hwNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hwNqajitter."
::= { hwNqaNotifications 2 }
hwNqaProbeFailure NOTIFICATION-TYPE
OBJECTS {
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex,
pingCtlTargetAddressType,
pingCtlTargetAddress,
pingCtlType,
pingCtlDescr,
hwNqaReactThresholdType,
hwNqaReactCurrentStatus
}
STATUS current
DESCRIPTION
"It is generated when the value of hwNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the probe test accumulatively failed for a
number of times specified in hwNqaReactThresholdAccumNum in one
test while the value of hwNqaReactThresholdType is 'accumulative'.
2. When the probe test consecutively failed for
a number of times specified in hwNqaReactThresholdConsecNum in one
test while the value of hwNqaReactThresholdType is 'consecutive'.
This notification is valid only when hwNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hwNqajitter."
::= { hwNqaNotifications 3 }
hwNqaJitterPacketLoss NOTIFICATION-TYPE
OBJECTS {
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex,
pingCtlTargetAddressType,
pingCtlTargetAddress,
pingCtlType,
pingCtlDescr,
hwNqaReactThresholdType,
hwNqaReactCurrentStatus
}
STATUS current
DESCRIPTION
"It is generated when the value of hwNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the jitter packets accumulatively lost for a
number of times specified in hwNqaReactThresholdAccumNum in one
test while the value of hwNqaReactThresholdType is 'accumulative'.
This notification is valid only when hwNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hwNqajitter."
::= { hwNqaNotifications 4 }
hwNqaJitterSDOverThreshold NOTIFICATION-TYPE
OBJECTS {
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex,
pingCtlTargetAddressType,
pingCtlTargetAddress,
pingCtlType,
pingCtlDescr,
hwNqaReactThresholdType,
hwNqaReactCurrentStatus
}
STATUS current
DESCRIPTION
"The SD means the jitter values from source to destination.
It is generated when the value of hwNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of SD in one jitter test is not in the range
hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit and the
hwNqaReactThresholdType is specified as 'average' type.
2. The average of SD in one jitter test is accumulatively
not in the range hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit for a number of times specified
in hwNqaReactThresholdAccumNum and the
hwNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hwNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hwNqajitter."
::= { hwNqaNotifications 5 }
hwNqaJitterDSOverThreshold NOTIFICATION-TYPE
OBJECTS {
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex,
pingCtlTargetAddressType,
pingCtlTargetAddress,
pingCtlType,
pingCtlDescr,
hwNqaReactThresholdType,
hwNqaReactCurrentStatus
}
STATUS current
DESCRIPTION
"The DS means the jitter values from destination to source.
It is generated when the value of hwNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of DS in one jitter test is not in the range
hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit and the
hwNqaReactThresholdType is specified as 'average' type.
2. The average of DS in one jitter test is accumulatively not
in the range hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit for a number of times specified
in hwNqaReactThresholdAccumNum and the
hwNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hwNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hwNqajitter."
::= { hwNqaNotifications 6 }
hwNqaICPIFOverThreshold NOTIFICATION-TYPE
OBJECTS {
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex,
pingCtlTargetAddressType,
pingCtlTargetAddress,
pingCtlType,
pingCtlDescr,
hwNqaReactCurrentStatus
}
STATUS current
DESCRIPTION
"It is generated when the value of hwNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the ICPIF value in one jitter test is not in
the range hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit.
This notification is valid only when hwNqaReactActionType
is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test
is hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'."
::= { hwNqaNotifications 7 }
hwNqaMOSOverThreshold NOTIFICATION-TYPE
OBJECTS {
hwNqaReactOwnerIndex,
hwNqaReactTestName,
hwNqaReactItemIndex,
pingCtlTargetAddressType,
pingCtlTargetAddress,
pingCtlType,
pingCtlDescr,
hwNqaReactCurrentStatus
}
STATUS current
DESCRIPTION
"It is generated when the value of hwNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the MOS value in one jitter test is not in
the range hwNqaReactThresholdLowerLimit through
hwNqaReactThresholdUpperLimit.
This notification is valid only when hwNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' , pingCtlType of the test
is hwNqajitter and hwNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'."
::= { hwNqaNotifications 8 }
END
View Git Blame Copy Permalink