2053 lines
63 KiB
Plaintext
2053 lines
63 KiB
Plaintext
-- ===========================================================
|
|
-- Copyright (C) 2003 by HUAWEI-3Com TECHNOLOGIES. All rights reserved.
|
|
--
|
|
-- Description: HUAWEI LAN Switch huawei-3com epon MIB
|
|
-- Reference: IF-MIB
|
|
-- Version: V1.7
|
|
-- History:
|
|
-- V1.0 created by liuhongxu.
|
|
-- Initial version 2006-01-10
|
|
-- V1.1 Updated by chenzhaojie
|
|
-- Add enumeration values to h3cEponUniVlanType
|
|
-- V1.2 Updated by chenzhaojie 2006-08-02
|
|
-- Add h3cEponUniOutDroppedFrames
|
|
-- V1.3 Updated by chenzhaojie 2007-05-21
|
|
-- Add h3cEponUniScalarGroup
|
|
-- Add enumeration values to h3cEponUniVlanType
|
|
-- Add h3cEponUniPortIsolate, h3cEponUniVlanConfiguration
|
|
-- h3cEponUniAutoNegotiation, h3cEponUniRestartAutoNeg,
|
|
-- h3cEponUniLinkStatus, h3cEponUniInterfaceType
|
|
-- to h3cEponUniSysManTable.
|
|
-- Add h3cEponUniPortPolicyTable, h3cEponUniMulticastTable.
|
|
-- Add h3cEponUniMulticastControlTable, h3cEponUniQosConfIndexNextTable,
|
|
-- h3cEponUniQosConfTable, h3cEponUniQosRuleTable.
|
|
-- V1.4 Updated by liuhongxu,andapeng 2007-10-13
|
|
-- Add h3cEponUniMulticastFastleave to h3cEponUniMulticastTable
|
|
-- Add h3cEponUniMulticastIndex to h3cEponUniMulticastControlTable
|
|
-- Add h3cEponUniVitualCableTest to h3cEponUniSysManTable
|
|
-- Add h3cEponUniMirrorGroupTable, h3cEponUniMirrorGroupIdNextTable
|
|
-- Add h3cEponUniMulticastCtrlInfoTable
|
|
-- Add h3cEponUniPortPolicyInboundCir,h3cEponUniPortPolicyInboundBucketDepth,
|
|
-- h3cEponUniPortPolicyInboundExtraBurst,h3cEponUniPortPolicyOutboundCir
|
|
-- to h3cEponUniPortPolicyTable.
|
|
-- Add h3cEponUniMulticastIndexNextTable
|
|
-- Modify h3cEponUniInterfaceType
|
|
-- V1.5 Updated by maguoqiang,wangke,zhaodan 2008-1-14
|
|
-- Deleted default values of these leaves:
|
|
-- h3cEponUniMdi,h3cEponUniPriority, h3cEponUniVlanType, h3cEponUniFlowControl,
|
|
-- h3cEponUniDuplex, h3cEponUniVlanVPNStatus, h3cEponUniPortIsolate,
|
|
-- h3cEponUniAutoNegotiation, h3cEponUniVitualCableTest
|
|
-- Add h3cEponUniMulticastSourceIpList to h3cEponUniMulticastControlTable
|
|
-- Add h3cEponUniMulticastResetInterval to h3cEponUniMulticastControlTable
|
|
-- Modify h3cEponUniVCTCableStatus and add 9 nodes:
|
|
-- Add h3cEponUniVCTCableLength
|
|
-- h3cEponUniVCTImpedanceMismatch
|
|
-- h3cEponUniVCTPairSkew
|
|
-- h3cEponUniVCTPairSwap
|
|
-- h3cEponUniVCTPolaritySwap
|
|
-- h3cEponUniVCTInsertionLoss
|
|
-- h3cEponUniVCTReturnLoss
|
|
-- h3cEponUniVCTNearendCrosstalk to h3cEponUniSysManTable
|
|
-- V1.6 Updated by zoudian 2008-3-17
|
|
-- Add h3cEponUniPortPolicyOutboundPir to h3cEponUniPortPolicyTable
|
|
-- Mofify h3cEponUniPortPolicyOutboundCir
|
|
-- V1.7 Updated by zhaodan 2008-06-04
|
|
-- Add h3cEponUniLinkUpTrap and h3cEponUniLinkDownTrap.
|
|
-- Modify the MAX-ACCESS of h3cEponUniIndex to accessible-for-notify.
|
|
-- =================================================================
|
|
A3COM-HUAWEI-EPON-UNI-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
h3cEpon
|
|
FROM A3COM-HUAWEI-OID-MIB
|
|
ifIndex, ifDescr
|
|
FROM IF-MIB
|
|
Integer32, Unsigned32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MacAddress, TruthValue, RowStatus
|
|
FROM SNMPv2-TC;
|
|
|
|
h3cEponUni MODULE-IDENTITY
|
|
LAST-UPDATED "200807281743Z"
|
|
ORGANIZATION
|
|
"Hangzhou H3C Technologies Co., Ltd."
|
|
CONTACT-INFO
|
|
"Platform Team Hangzhou H3C Technologies Co., Ltd.
|
|
Hai-Dian District Beijing P.R. China
|
|
Http://www.h3c.com
|
|
Zip:100085"
|
|
DESCRIPTION
|
|
"The objects in this MIB module are used to manage and
|
|
display current configuration of UNI (user network interface)
|
|
which is based on the ONU(Optical Network Unit)."
|
|
::= { h3cEpon 5 }
|
|
|
|
h3cEponUniSysMan OBJECT IDENTIFIER ::= { h3cEponUni 1 }
|
|
|
|
h3cEponUniSysManTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniSysManEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines several UNI system parameters."
|
|
::= { h3cEponUniSysMan 1 }
|
|
|
|
h3cEponUniSysManEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniSysManEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of h3cEponUniSysManTable."
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex
|
|
}
|
|
::= { h3cEponUniSysManTable 1 }
|
|
|
|
|
|
H3cEponUniSysManEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniIndex Integer32,
|
|
h3cEponUniDescr OCTET STRING,
|
|
h3cEponUniAdminStatus INTEGER,
|
|
h3cEponUniMdi INTEGER,
|
|
h3cEponUniPriority Integer32,
|
|
h3cEponUniVlanType INTEGER,
|
|
h3cEponUniAccessVlan Integer32,
|
|
h3cEponUniTrunkPvid INTEGER,
|
|
h3cEponUniVLANTrunkAllowListLow OCTET STRING,
|
|
h3cEponUniVLANTrunkAllowListHigh OCTET STRING,
|
|
h3cEponUniInboundLineRate Integer32,
|
|
h3cEponUniOutboundLineRate Integer32,
|
|
h3cEponUniFlowControl TruthValue,
|
|
h3cEponUniSpeed INTEGER,
|
|
h3cEponUniDuplex INTEGER,
|
|
h3cEponUniVlanVPNStatus TruthValue,
|
|
h3cEponUniCountReset INTEGER,
|
|
h3cEponUniPortIsolate INTEGER,
|
|
h3cEponUniVlanConfiguration OCTET STRING,
|
|
h3cEponUniAutoNegotiation INTEGER,
|
|
h3cEponUniRestartAutoNeg INTEGER,
|
|
h3cEponUniLinkStatus INTEGER,
|
|
h3cEponUniInterfaceType INTEGER,
|
|
h3cEponUniVitualCableTest INTEGER,
|
|
h3cEponUniVCTCableStatus INTEGER,
|
|
h3cEponUniVCTCableLength Integer32,
|
|
h3cEponUniVCTImpedanceMismatch INTEGER,
|
|
h3cEponUniVCTPairSkew Integer32,
|
|
h3cEponUniVCTPairSwap INTEGER,
|
|
h3cEponUniVCTPolaritySwap INTEGER,
|
|
h3cEponUniVCTInsertionLoss Integer32,
|
|
h3cEponUniVCTReturnLoss Integer32,
|
|
h3cEponUniVCTNearendCrosstalk Integer32
|
|
}
|
|
|
|
h3cEponUniIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the FE(fast Ethernet)
|
|
interface of the ONU."
|
|
::= { h3cEponUniSysManEntry 1 }
|
|
|
|
h3cEponUniDescr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing information about the interface. This
|
|
string should include the name of the manufacturer, the product name
|
|
and the version of the interface hardware and software."
|
|
::= { h3cEponUniSysManEntry 2 }
|
|
|
|
h3cEponUniAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
testing(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired state of the user network interface. When a managed
|
|
system initializes, all user network interfaces start with down(2)
|
|
state. The testing(3)state indicates that no operational packets
|
|
can be passed. As a result of either explicit management action or
|
|
per configuration information retained by the managed system,
|
|
h3cEponUniAdminStatus is then changed to either the up(1) or
|
|
testing(3) states (or remains in the down(2) state)."
|
|
::= { h3cEponUniSysManEntry 3 }
|
|
|
|
h3cEponUniMdi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mdi-ii(1),
|
|
mdi-x(2),
|
|
mdi-auto(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of the line connected to UNI interface:
|
|
mdi-ii(straight-through cable),
|
|
mdi-x (crossover cable),
|
|
mdi-auto (auto-sensing)."
|
|
::= { h3cEponUniSysManEntry 4 }
|
|
|
|
h3cEponUniPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority of user network interface. If the value is larger,
|
|
the priority will be higher."
|
|
::= { h3cEponUniSysManEntry 5 }
|
|
|
|
h3cEponUniVlanType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
vlantrunk(1),
|
|
access(2),
|
|
hybrid(3),
|
|
untagged(4),
|
|
transparent(5),
|
|
doubletagged(6),
|
|
tag(7),
|
|
translation(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"UNI vlan types."
|
|
::= { h3cEponUniSysManEntry 6 }
|
|
|
|
h3cEponUniAccessVlan OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan ID assigned to untagged frames or Priority-Tagged
|
|
frames received on user network interface."
|
|
::= { h3cEponUniSysManEntry 7 }
|
|
|
|
h3cEponUniTrunkPvid OBJECT-TYPE
|
|
SYNTAX INTEGER(1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PVID(port vlan ID), the vlan ID assigned to untagged frames or
|
|
Priority-Tagged frames received on user network interface."
|
|
::= { h3cEponUniSysManEntry 8 }
|
|
|
|
h3cEponUniVLANTrunkAllowListLow OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight vlans,
|
|
with the first octet specifying vlans 1 through 8, the second
|
|
octet specifying vlans 9 through 16, etc. Within each octet,
|
|
the most significant bit represents the highest numbered VLAN,
|
|
and the least significant bit represents the lowest numbered VLAN.
|
|
Thus, each allowed vlan of the trunk port is represented by a
|
|
single bit within the value of this object. If that bit has a value
|
|
of '1' then that vlan is allowed in the set of vlans. the vlan
|
|
is not allowed if its bit has a value of '0'."
|
|
::= { h3cEponUniSysManEntry 9 }
|
|
|
|
h3cEponUniVLANTrunkAllowListHigh OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight vlans,
|
|
with the first octet specifying vlans 2049 through 2056, the
|
|
second octet specifying vlans 2057 through 2064, etc. Within
|
|
each octet, the most significant bit represents the highest
|
|
numbered vlan, and the least significant bit represents the
|
|
lowest numbered vlan. Thus, each allowed vlan of the trunk port
|
|
is represented by a single bit within the value of this object.
|
|
If that bit has a value of '1' then that vlan is allowed in the
|
|
set of vlans; the vlan is not allowed if its bit has a value of '0'.
|
|
"
|
|
::= { h3cEponUniSysManEntry 10 }
|
|
|
|
h3cEponUniInboundLineRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the inbound line-rate. measured with kbps.
|
|
The upper limit of the line-rate is the value of
|
|
h3cEponUniLineRateMax in the entry. It must be multiple
|
|
of the value of h3cEponUniLineRateStep. The default value of
|
|
h3cEponUniLineRate is the value of h3cEponUniLineRateMax."
|
|
::= { h3cEponUniSysManEntry 11 }
|
|
|
|
h3cEponUniOutboundLineRate OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the outbound line-rate. measured with kbps.
|
|
The upper limit of the line-rate is the value of
|
|
h3cEponUniLineRateMax in the entry. It must be multiple
|
|
of the value of h3cEponUniLineRateStep. The default value of
|
|
h3cEponUniLineRate is the value of h3cEponUniLineRateMax."
|
|
::= { h3cEponUniSysManEntry 12 }
|
|
|
|
h3cEponUniFlowControl OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flow control status.
|
|
true(1) - Flow control status enable.
|
|
false(2) - Flow control status disable."
|
|
::= { h3cEponUniSysManEntry 13 }
|
|
|
|
h3cEponUniSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(0),
|
|
s10M(10),
|
|
s100M(100),
|
|
s1000M(1000),
|
|
s10000M(10000),
|
|
s24000M(24000)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User network interface speed."
|
|
::= { h3cEponUniSysManEntry 14 }
|
|
|
|
h3cEponUniDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
full(1),
|
|
half(2),
|
|
auto(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User network interface mode."
|
|
::= { h3cEponUniSysManEntry 15 }
|
|
|
|
h3cEponUniVlanVPNStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"vlan VPN status.
|
|
true(1) - vlan VPN status enable.
|
|
false(2) - vlan VPN disable."
|
|
::= { h3cEponUniSysManEntry 16 }
|
|
|
|
h3cEponUniCountReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the counter which is about packets of the interface,
|
|
then the counter will change to zero. There is no sense in
|
|
reading this object."
|
|
::= { h3cEponUniSysManEntry 17 }
|
|
|
|
h3cEponUniPortIsolate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
enable - enable UNI port isolate setting.
|
|
disable - disable UNI port isolate setting.
|
|
"
|
|
::= { h3cEponUniSysManEntry 18 }
|
|
|
|
|
|
h3cEponUniVlanConfiguration OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The vlan configuration of the related vlan mode.
|
|
Transparent vlan mode: h3cEponUniVlanConfiguration is a
|
|
zero length string.
|
|
Tag vlan mode: the first four octets were the tag
|
|
assigned to untagged frames received on UNI, including TPID,
|
|
VID,CFI and priority.
|
|
Translation vlan mode: the first four octets were the old tag
|
|
(including TPID, VID, CFI and priority), which is replaced
|
|
by the new tag(including TPID, VID, CFI and priority),
|
|
the second four octets.
|
|
"
|
|
::= { h3cEponUniSysManEntry 23 }
|
|
|
|
h3cEponUniAutoNegotiation OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
enable - enable auto negotiation.
|
|
disable - disable auto negotiation.
|
|
"
|
|
::= { h3cEponUniSysManEntry 25 }
|
|
|
|
h3cEponUniRestartAutoNeg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
autoNegotiation(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Force to restart the auto negotiation process.
|
|
"
|
|
::= { h3cEponUniSysManEntry 26 }
|
|
|
|
|
|
h3cEponUniLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The link status of UNI.
|
|
"
|
|
::= { h3cEponUniSysManEntry 29 }
|
|
|
|
h3cEponUniInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
gigabitethernetport(1),
|
|
fastethernetport(2),
|
|
voipport(3),
|
|
e1port(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI interface type.
|
|
"
|
|
::= { h3cEponUniSysManEntry 30 }
|
|
|
|
-- BEGIN for UNI VCT
|
|
h3cEponUniVitualCableTest OBJECT-TYPE
|
|
SYNTAX INTEGER{true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
True(1): Virtual cable test enable.
|
|
False(2): Virtual cable test disable."
|
|
DEFVAL{ false }
|
|
::= { h3cEponUniSysManEntry 31 }
|
|
|
|
h3cEponUniVCTCableStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{normal(1),
|
|
abnormal(2),
|
|
abnormalOpen(3),
|
|
abnormalShort(4),
|
|
failure(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Get the cable status.
|
|
Normal(1),cable is normal.
|
|
Abnormal(2),cable is abnormal.
|
|
AbnormalOpen(3),cable is abnormal because of open circuit.
|
|
AbnormalShort(4),cable is abnormal because of short circuit.
|
|
Failure(5),cable is abnormal because of testing failure.
|
|
"
|
|
::= { h3cEponUniSysManEntry 32 }
|
|
|
|
h3cEponUniVCTCableLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Get the cable length.
|
|
When h3cEponUniVCTCableStatus is normal,
|
|
the node stands for the length from the UNI port to the port opposite.
|
|
When h3cEponUniVCTCableStatus is abnormal,
|
|
it stands for the lengh from the UNI port to the failure place.
|
|
Unit:meter(m).
|
|
"
|
|
::= { h3cEponUniSysManEntry 33 }
|
|
|
|
h3cEponUniVCTImpedanceMismatch OBJECT-TYPE
|
|
SYNTAX INTEGER{not-support(1),
|
|
true(2),
|
|
false(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Get the cable impedance.
|
|
Not-support(1),the UNI port does not support this function.
|
|
True(2),impedance match.
|
|
False(3),impedance mismatch."
|
|
::= { h3cEponUniSysManEntry 34 }
|
|
|
|
h3cEponUniVCTPairSkew OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Get the symmetry of cable.
|
|
If the function is not supported ,
|
|
the default value 0 will be returned.
|
|
Unit:nanosecond(ns).
|
|
"
|
|
::= { h3cEponUniSysManEntry 35 }
|
|
|
|
h3cEponUniVCTPairSwap OBJECT-TYPE
|
|
SYNTAX INTEGER{notSupport(1),
|
|
true(2),
|
|
false(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
NotSupport(1),the UNI port does not support this function.
|
|
True(2),pair swap.
|
|
False(3),not pair swap."
|
|
::= { h3cEponUniSysManEntry 36 }
|
|
|
|
h3cEponUniVCTPolaritySwap OBJECT-TYPE
|
|
SYNTAX INTEGER{notSupport(1),
|
|
true(2),
|
|
false(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
NotSupport(1),the UNI port does not support this function.
|
|
True(2),polarity swap.
|
|
False(3),not polarity swap."
|
|
::= { h3cEponUniSysManEntry 37 }
|
|
|
|
h3cEponUniVCTInsertionLoss OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
If the function is not supported ,
|
|
the default value 0 will be returned.
|
|
Unit:decibel(db).
|
|
"
|
|
::= { h3cEponUniSysManEntry 38 }
|
|
|
|
h3cEponUniVCTReturnLoss OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
If the function is not supported ,
|
|
the default value 0 will be returned.
|
|
Unit:decibel(db).
|
|
"
|
|
::= { h3cEponUniSysManEntry 39 }
|
|
|
|
h3cEponUniVCTNearendCrosstalk OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
If the function is not supported ,
|
|
the default value 0 will be returned.
|
|
Unit:decibel(db).
|
|
"
|
|
::= { h3cEponUniSysManEntry 40 }
|
|
|
|
-- END for UNI VCT
|
|
|
|
h3cEponUniCountTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of interface counter about frames entries."
|
|
::= { h3cEponUniSysMan 2 }
|
|
|
|
h3cEponUniCountEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing management information applicable
|
|
to a particular interface."
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex
|
|
}
|
|
::= { h3cEponUniCountTable 1 }
|
|
|
|
H3cEponUniCountEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniInStatsPkts Unsigned32,
|
|
h3cEponUniInStatsUnicastPkts Unsigned32,
|
|
h3cEponUniInStatsBroadcastPkts Unsigned32,
|
|
h3cEponUniInStatsMulticastPkts Unsigned32,
|
|
h3cEponUniInPausePkts Unsigned32,
|
|
h3cEponUniInTotalErrors Unsigned32,
|
|
h3cEponUniInStatsCRCAlignErrors Unsigned32,
|
|
h3cEponUniInStatsUndersizePkts Unsigned32,
|
|
h3cEponUniInStatsOversizePkts Unsigned32,
|
|
h3cEponUniInErrorbyOther Unsigned32,
|
|
h3cEponUniOutStatsPkts Unsigned32,
|
|
h3cEponUniOutStatsUnicastPkts Unsigned32,
|
|
h3cEponUniOutStatsBroadcastPkts Unsigned32,
|
|
h3cEponUniOutStatsMulticastPkts Unsigned32,
|
|
h3cEponUniOutStatsPausePkts Unsigned32,
|
|
h3cEponUniOutTotalErrors Unsigned32,
|
|
h3cEponUniOutStatsCollisions Unsigned32,
|
|
h3cEponUniOutDelayExceededDiscards Unsigned32,
|
|
h3cEponUniOutErrorbyOther Unsigned32,
|
|
h3cEponUniOutDroppedFrames Unsigned32
|
|
}
|
|
|
|
h3cEponUniInStatsPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of frames (including bad frames,
|
|
broadcast frames, and multicast frames) received."
|
|
::= { h3cEponUniCountEntry 1 }
|
|
|
|
h3cEponUniInStatsUnicastPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good frames received that are
|
|
directed to the unicast address. Note that this
|
|
does not include multicast and broadcast frames."
|
|
::= { h3cEponUniCountEntry 2 }
|
|
|
|
h3cEponUniInStatsBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good frames received that are
|
|
directed to the broadcast address. Note that this
|
|
does not include multicast frames."
|
|
::= { h3cEponUniCountEntry 3 }
|
|
|
|
h3cEponUniInStatsMulticastPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good frames received that are
|
|
directed to a multicast address. Note that this number
|
|
does not include frames directed to the broadcast address."
|
|
::= { h3cEponUniCountEntry 4 }
|
|
|
|
h3cEponUniInPausePkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of MAC Control frames received on this
|
|
interface by the pause(flow control) operation.
|
|
This counter does not increment when the
|
|
interface is in a half-duplex mode.
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management
|
|
system."
|
|
::= { h3cEponUniCountEntry 5 }
|
|
|
|
h3cEponUniInTotalErrors OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total count of the error frames received on this interface."
|
|
::= { h3cEponUniCountEntry 6 }
|
|
|
|
h3cEponUniInStatsCRCAlignErrors OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of frames received that
|
|
had a length (excluding framing bits, but
|
|
including FCS octets) of between 64 and 1518
|
|
octets, inclusive, but had either a bad
|
|
Frame Check Sequence (FCS) with an integral
|
|
number of octets (FCS Error) or a bad FCS with
|
|
a non-integral number of octets (Alignment Error)."
|
|
::= { h3cEponUniCountEntry 7 }
|
|
|
|
h3cEponUniInStatsUndersizePkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of frames received that are
|
|
less than 64 octets long (excluding framing bits,
|
|
but including FCS octets) and are otherwise well formed."
|
|
::= { h3cEponUniCountEntry 8 }
|
|
|
|
h3cEponUniInStatsOversizePkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of frames received that are
|
|
longer than 1518 octets (excluding framing bits,
|
|
but including FCS octets) and are otherwise well formed."
|
|
::= { h3cEponUniCountEntry 9 }
|
|
|
|
h3cEponUniInErrorbyOther OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of error frames received on this interface."
|
|
::= { h3cEponUniCountEntry 10 }
|
|
|
|
h3cEponUniOutStatsPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of frames (including bad frames,
|
|
broadcast frames, and multicast frames) sent."
|
|
::= { h3cEponUniCountEntry 11 }
|
|
|
|
h3cEponUniOutStatsUnicastPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good frames sent that are
|
|
directed to the unicast address. Note that this
|
|
does not include multicast and broadcast frames."
|
|
::= { h3cEponUniCountEntry 12 }
|
|
|
|
h3cEponUniOutStatsBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good frames sent that are
|
|
directed to the broadcast address. Note that this
|
|
does not include multicast frames."
|
|
::= { h3cEponUniCountEntry 13 }
|
|
|
|
h3cEponUniOutStatsMulticastPkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of good frames sent that are
|
|
directed to a multicast address. Note that this number
|
|
does not include frames directed to the broadcast address."
|
|
::= { h3cEponUniCountEntry 14 }
|
|
|
|
h3cEponUniOutStatsPausePkts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of MAC control frames sent on this
|
|
interface by the pause operation. This counter does
|
|
not increment when the interface is in a half-duplex mode.
|
|
Discontinuities in the value of this counter can
|
|
occur at re-initialization of the management system."
|
|
::= { h3cEponUniCountEntry 15 }
|
|
|
|
h3cEponUniOutTotalErrors OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of error frames sent on this interface."
|
|
::= { h3cEponUniCountEntry 16 }
|
|
|
|
h3cEponUniOutStatsCollisions OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The best estimate of the total number of collisions
|
|
on this Ethernet segment.
|
|
The value returned will depend on the location of the
|
|
RMON probe. Section 8.2.1.3 (10BASE-5) and section
|
|
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
|
|
station must detect a collision, in the receive mode, if
|
|
three or more stations are transmitting simultaneously. A
|
|
repeater port must detect a collision when two or more
|
|
stations are transmitting simultaneously. Thus a probe
|
|
placed on a repeater port could record more collisions
|
|
than a probe connected to a station on the same segment
|
|
could. Probe location plays a much smaller role when considering
|
|
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
|
|
defines a collision as the simultaneous presence of signals
|
|
on the DO and RD circuits (transmitting and receiving
|
|
at the same time). A 10BASE-T station can only detect
|
|
collisions when it is transmitting. Thus probes placed on
|
|
a station and a repeater, should report the same number of
|
|
collisions. Note also that an RMON probe inside a repeater should
|
|
ideally report collisions between the repeater and one or
|
|
more other hosts (transmit collisions as defined by IEEE
|
|
802.3k) plus receiver collisions observed on any coax
|
|
segments to which the repeater is connected."
|
|
::= { h3cEponUniCountEntry 17 }
|
|
|
|
h3cEponUniOutDelayExceededDiscards OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames discarded by this port due
|
|
to excessive transit delay through the bridge. It
|
|
is incremented by both transparent and source route bridges."
|
|
::= { h3cEponUniCountEntry 18 }
|
|
|
|
h3cEponUniOutErrorbyOther OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of other error frames sent on this interface.
|
|
Other error frames means the error frames out of collision frames
|
|
and excessive delayed frames."
|
|
::= { h3cEponUniCountEntry 19 }
|
|
|
|
h3cEponUniOutDroppedFrames OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The total number of frames dropped because of buffer failure.
|
|
"
|
|
::= { h3cEponUniCountEntry 20 }
|
|
|
|
h3cEponUniIgmpInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniIgmpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table stores igmp information of UNI interface."
|
|
::= { h3cEponUniSysMan 3 }
|
|
|
|
h3cEponUniIgmpInfoEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniIgmpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of h3cEponUniIgmpInfoTable."
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex,
|
|
h3cEponUniMacIndex
|
|
}
|
|
::= { h3cEponUniIgmpInfoTable 1 }
|
|
|
|
H3cEponUniIgmpInfoEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniMacIndex Integer32,
|
|
h3cEponUniIgmpMacAddress MacAddress,
|
|
h3cEponUniIgmpVlanId Integer32
|
|
}
|
|
|
|
h3cEponUniMacIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index uniquely identifies the igmp information in current
|
|
UNI interface."
|
|
::= { h3cEponUniIgmpInfoEntry 1 }
|
|
|
|
h3cEponUniIgmpMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 6-octet read-only value carrying the individual MAC address
|
|
indicates which igmp group the UNI interface belonging to."
|
|
::= { h3cEponUniIgmpInfoEntry 2 }
|
|
|
|
h3cEponUniIgmpVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer range from 1 to 4094 indicates the vlan which the igmp
|
|
Mac address has joined in."
|
|
::= { h3cEponUniIgmpInfoEntry 3 }
|
|
|
|
h3cEponUniParaMan OBJECT IDENTIFIER ::= { h3cEponUniSysMan 4 }
|
|
|
|
h3cEponUniLineRateMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum value of the line-rate(kbps) that user network
|
|
interface can be set."
|
|
::= { h3cEponUniParaMan 1 }
|
|
|
|
h3cEponUniLineRateStep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The step of line-rate(kbps)."
|
|
::= { h3cEponUniParaMan 2 }
|
|
|
|
h3cEponUniNumberOnOnu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user network interface number on ONU."
|
|
::= { h3cEponUniParaMan 3 }
|
|
|
|
|
|
h3cEponUniScalarGroup OBJECT IDENTIFIER ::= { h3cEponUniSysMan 5 }
|
|
|
|
--
|
|
-- h3cEponUniPortPolicyTable
|
|
--
|
|
|
|
h3cEponUniPortPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniPortPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI port policy configuration.
|
|
"
|
|
::= { h3cEponUniSysMan 6 }
|
|
|
|
h3cEponUniPortPolicyEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniPortPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of h3cEponUniPortPolicyTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex
|
|
}
|
|
::= { h3cEponUniPortPolicyTable 1 }
|
|
|
|
H3cEponUniPortPolicyEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniPortPolicyStatus INTEGER,
|
|
h3cEponUniPortPolicyCir Integer32,
|
|
h3cEponUniPortPolicyBucketDepth Integer32,
|
|
h3cEponUniPortPolicyExtraBurst Integer32,
|
|
h3cEponUniPortPolicyInboundCir Integer32,
|
|
h3cEponUniPortPolicyInboundBucketDepth Integer32,
|
|
h3cEponUniPortPolicyInboundExtraBurst Integer32,
|
|
h3cEponUniPortPolicyOutboundCir Integer32,
|
|
h3cEponUniPortPolicyOutboundPir Integer32
|
|
}
|
|
|
|
h3cEponUniPortPolicyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
enable - enable UNI upstream port policing.
|
|
disable - disable UNI upstream port policing.
|
|
"
|
|
DEFVAL { disable }
|
|
::= { h3cEponUniPortPolicyEntry 1 }
|
|
|
|
h3cEponUniPortPolicyCir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The committed information rate,
|
|
ranging from 1 to 102400, measured in kbps.
|
|
"
|
|
DEFVAL { 102400 }
|
|
::= { h3cEponUniPortPolicyEntry 2 }
|
|
|
|
h3cEponUniPortPolicyBucketDepth OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The depth of the token bucket to tolerant the certain burst(CBS),
|
|
ranging from 0 to 65535, measured in bytes.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { h3cEponUniPortPolicyEntry 3 }
|
|
|
|
h3cEponUniPortPolicyExtraBurst OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The extra token to permit the forwarding engine to finish the packet
|
|
being sent when the bucket depth is exhausted, ranging from 0 to 65535,
|
|
measured in bytes.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { h3cEponUniPortPolicyEntry 4 }
|
|
|
|
h3cEponUniPortPolicyInboundCir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The inbound committed information rate, measured in kbps.
|
|
"
|
|
::= { h3cEponUniPortPolicyEntry 5 }
|
|
|
|
h3cEponUniPortPolicyInboundBucketDepth OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The inbound depth of the token bucket to tolerant the certain burst(CBS),
|
|
ranging from 0 to 65535, measured in bytes.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { h3cEponUniPortPolicyEntry 6 }
|
|
|
|
h3cEponUniPortPolicyInboundExtraBurst OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The inbound extra token to permit the forwarding engine to finish the packet
|
|
being sent when the bucket depth is exhausted, ranging from 0 to 65535,
|
|
measured in bytes.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { h3cEponUniPortPolicyEntry 7 }
|
|
|
|
h3cEponUniPortPolicyOutboundCir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The outbound committed information rate, stepped by 64, measured in kbps.
|
|
"
|
|
::= { h3cEponUniPortPolicyEntry 8 }
|
|
|
|
h3cEponUniPortPolicyOutboundPir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The outbound peak information rate, stepped by 64, measured in kbps.
|
|
"
|
|
::= { h3cEponUniPortPolicyEntry 9 }
|
|
--
|
|
-- h3cEponUniMulticastTable
|
|
--
|
|
h3cEponUniMulticastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI multicast configuration.
|
|
"
|
|
::= { h3cEponUniSysMan 7 }
|
|
|
|
h3cEponUniMulticastEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniMulticastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of h3cEponUniPortPolicyTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex
|
|
}
|
|
::= { h3cEponUniMulticastTable 1 }
|
|
|
|
H3cEponUniMulticastEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniMulticastGroupNumber Integer32,
|
|
h3cEponUniMulticastVlanList OCTET STRING,
|
|
h3cEponUniMulticastStripStatus INTEGER,
|
|
h3cEponUniMulticastFastleave TruthValue
|
|
}
|
|
|
|
h3cEponUniMulticastGroupNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The allowed multicast group number that can be handled
|
|
at the same time by UNI.
|
|
"
|
|
DEFVAL { 64 }
|
|
::= { h3cEponUniMulticastEntry 1 }
|
|
|
|
|
|
h3cEponUniMulticastVlanList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The multicast vlan list.
|
|
The first two octets of the string represent the first VLAN ID;
|
|
the second two octets of the string represent the second VLAN ID,
|
|
and so on. It is a zero length string by default.
|
|
"
|
|
::= { h3cEponUniMulticastEntry 2 }
|
|
|
|
h3cEponUniMulticastStripStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
true - strip the vlan tag of multicast packet.
|
|
false - does not strip the vlan tag of multicast packet.
|
|
"
|
|
DEFVAL { disable }
|
|
::= { h3cEponUniMulticastEntry 3 }
|
|
|
|
h3cEponUniMulticastFastleave OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
true(1) - fast leave of IGMP enable on ONU.
|
|
false(2) - fast leave of IGMP disable on ONU.
|
|
"
|
|
DEFVAL { false }
|
|
::= { h3cEponUniMulticastEntry 4 }
|
|
|
|
--
|
|
-- h3cEponUniTechAbilityTable
|
|
--
|
|
h3cEponUniTechAbilityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniTechAbilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI multicast configuration.
|
|
"
|
|
::= { h3cEponUniSysMan 8 }
|
|
|
|
h3cEponUniTechAbilityEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniTechAbilityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of h3cEponUniTechAbilityTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex
|
|
}
|
|
::= { h3cEponUniTechAbilityTable 1 }
|
|
|
|
H3cEponUniTechAbilityEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniLocalTechAbility OCTET STRING,
|
|
h3cEponUniAdvertisedTechAbility OCTET STRING
|
|
}
|
|
h3cEponUniLocalTechAbility OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The local port capabilities of the UNI.
|
|
Each two octets stand for a capability of UNI:
|
|
the first two octets represent one capability and
|
|
the second two octets represent another capability,
|
|
and so on.
|
|
The capabilities list:
|
|
1 - undefined,
|
|
2 - initializing, true ability not yet known,
|
|
14 - 10BASE-T,
|
|
142 - full duplex 10BASE-T,
|
|
23 - 100BASE-T4,
|
|
25 - 100BASE-TX,
|
|
252 - full duplex 100BASE-TX,
|
|
312 - PAUSE operation for full duplex links,
|
|
313 - asymmetric PAUSE operation for full duplex links,
|
|
314 - symmetric PAUSE operation for full duplex links,
|
|
32 - 100BASE-T2,
|
|
322 - full duplex 100BASE-T2,
|
|
36 - 1000BASE-X,
|
|
362 - full duplex 1000BASE-X,
|
|
40 - 1000BASE-T UTP PHY,
|
|
402 - full duplex 1000BASE-T UTP PHY,
|
|
37 - remote fault bit 1(RF1),
|
|
372 - remote fault bit 2(RF2),
|
|
8029 - 802.9ISLAN-16T.
|
|
"
|
|
::= { h3cEponUniTechAbilityEntry 1 }
|
|
|
|
h3cEponUniAdvertisedTechAbility OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The advertised port capabilities of the UNI.
|
|
The capabilities list references the description of h3cEponUniLocalTechAbility.
|
|
"
|
|
::= { h3cEponUniTechAbilityEntry 2 }
|
|
|
|
--
|
|
-- h3cEponUniMulticastControlTable
|
|
--
|
|
|
|
h3cEponUniMulticastControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniMulticastControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI multicast control parameters.
|
|
"
|
|
::= { h3cEponUniSysMan 9 }
|
|
|
|
h3cEponUniMulticastControlEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniMulticastControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of the table h3cEponUniMulticastControlTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex,
|
|
h3cEponUniMulticastIndex
|
|
}
|
|
::= { h3cEponUniMulticastControlTable 1 }
|
|
|
|
H3cEponUniMulticastControlEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniMulticastVlanIndex Integer32,
|
|
h3cEponUniMulticastAddressList OCTET STRING,
|
|
h3cEponUniMulticastAccessRule INTEGER,
|
|
h3cEponUniMulticastChannelLimit Integer32,
|
|
h3cEponUniMulticastPreTimeSlice Integer32,
|
|
h3cEponUniMulticastPreTimes Integer32,
|
|
h3cEponUniMulticastPreInterval Integer32,
|
|
h3cEponUniMulticastRowStatus RowStatus,
|
|
h3cEponUniMulticastIndex INTEGER,
|
|
h3cEponUniMulticastSourceIpList OCTET STRING,
|
|
h3cEponUniMulticastResetInterval Integer32
|
|
}
|
|
|
|
h3cEponUniMulticastVlanIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The multicast vlan ID.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 1 }
|
|
|
|
h3cEponUniMulticastAddressList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The multicast address, each four octets represents a multicast address,
|
|
the address section ranging from the first four octets to the second
|
|
four octets, and the like.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 2 }
|
|
|
|
h3cEponUniMulticastAccessRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(1),
|
|
permit(2),
|
|
preview(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
deny - deny the multicast packet.
|
|
permit - permit the multicast packet.
|
|
preview - permit the multicast packet with conditions.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 3 }
|
|
|
|
h3cEponUniMulticastChannelLimit OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The limitation of multicast preview channel number.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 4 }
|
|
|
|
h3cEponUniMulticastPreTimeSlice OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The time slice of multicast preview.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 5 }
|
|
|
|
h3cEponUniMulticastPreTimes OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of multicast preview times.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 6 }
|
|
|
|
h3cEponUniMulticastPreInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The interval between two consecutive previews, measured in minute.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 7 }
|
|
|
|
h3cEponUniMulticastRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The status of this table entry. The active,
|
|
createAndGo and the destory statuses are supported.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 8 }
|
|
|
|
h3cEponUniMulticastIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The index of the entry.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 9 }
|
|
|
|
h3cEponUniMulticastSourceIpList OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This list contains many source ip addresses.
|
|
Each ip address is contained in four octets.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 10 }
|
|
|
|
h3cEponUniMulticastResetInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The interval is measured in minute.
|
|
From the last preview limitation is reached, a customer can preview again
|
|
after this interval is expired.
|
|
"
|
|
::= { h3cEponUniMulticastControlEntry 11 }
|
|
|
|
--
|
|
-- h3cEponUniQosIndexNextTable
|
|
--
|
|
|
|
h3cEponUniQosIndexNextTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniQosIndexNextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The next index table.
|
|
"
|
|
::= { h3cEponUniSysMan 10 }
|
|
|
|
h3cEponUniQosIndexNextEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniQosIndexNextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of the table h3cEponUniQosIndexNextTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex
|
|
}
|
|
::= { h3cEponUniQosIndexNextTable 1 }
|
|
|
|
H3cEponUniQosIndexNextEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniQosConfIndexNext Integer32
|
|
}
|
|
|
|
h3cEponUniQosConfIndexNext OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object contains an appropriate value to be used for
|
|
h3cEponUniQosConfIndex when creating rows in the
|
|
h3cEponUniQosConfTable.
|
|
"
|
|
::= { h3cEponUniQosIndexNextEntry 1 }
|
|
|
|
--
|
|
-- h3cEponUniQosConfTable
|
|
--
|
|
|
|
h3cEponUniQosConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniQosConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI Qos configuration.
|
|
"
|
|
::= { h3cEponUniSysMan 11 }
|
|
|
|
h3cEponUniQosConfEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniQosConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of the table h3cEponUniQosConfTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex,
|
|
h3cEponUniQosConfIndex
|
|
}
|
|
::= { h3cEponUniQosConfTable 1 }
|
|
|
|
H3cEponUniQosConfEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniQosConfIndex Integer32,
|
|
h3cEponUniQosConfRuleIndexNext Integer32,
|
|
h3cEponUniQosConfMappedQueue Integer32,
|
|
h3cEponUniQosConfMarkedPriority Integer32,
|
|
h3cEponUniQosConfRowStatus RowStatus
|
|
}
|
|
|
|
h3cEponUniQosConfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The rule index.
|
|
"
|
|
::= { h3cEponUniQosConfEntry 1 }
|
|
|
|
h3cEponUniQosConfRuleIndexNext OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object contains an appropriate value to be used for
|
|
h3cEponUniQosRuleIndex when creating rows in the
|
|
h3cEponUniQosRuleTable.
|
|
"
|
|
::= { h3cEponUniQosConfEntry 2 }
|
|
|
|
h3cEponUniQosConfMappedQueue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The queue that the ethernet frames will be mapped.
|
|
"
|
|
::= { h3cEponUniQosConfEntry 3 }
|
|
|
|
h3cEponUniQosConfMarkedPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Priority of the ethernet frames to be marked, which
|
|
compliant with the 802.1D user priority standard.
|
|
"
|
|
::= { h3cEponUniQosConfEntry 4 }
|
|
|
|
h3cEponUniQosConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The status of this table entry. The active,
|
|
createAndGo and the destory statuses are supported.
|
|
"
|
|
::= { h3cEponUniQosConfEntry 5 }
|
|
|
|
--
|
|
-- h3cEponUniQosRuleTable
|
|
--
|
|
|
|
h3cEponUniQosRuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniQosRuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Qos sub rule of the UNI.
|
|
"
|
|
::= { h3cEponUniSysMan 12 }
|
|
|
|
h3cEponUniQosRuleEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniQosRuleEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of the table h3cEponUniQosRuleTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex,
|
|
h3cEponUniQosConfIndex,
|
|
h3cEponUniQosRuleIndex
|
|
}
|
|
::= { h3cEponUniQosRuleTable 1 }
|
|
|
|
H3cEponUniQosRuleEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniQosRuleIndex Integer32,
|
|
h3cEponUniQosRuleSelector INTEGER,
|
|
h3cEponUniQosRuleValue Integer32,
|
|
h3cEponUniQosRuleMacAddress MacAddress,
|
|
h3cEponUniQosRuleOperator INTEGER,
|
|
h3cEponUniQosRuleRowStatus RowStatus
|
|
}
|
|
|
|
h3cEponUniQosRuleIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The sub rule index.
|
|
"
|
|
::= { h3cEponUniQosRuleEntry 1 }
|
|
|
|
h3cEponUniQosRuleSelector OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dstmac(1),
|
|
srcmac(2),
|
|
ethernetpriority(3),
|
|
vlanid(4),
|
|
ethernettype(5),
|
|
dstip(6),
|
|
srcip(7),
|
|
ipprototype(8),
|
|
ipv4tosdscp(9),
|
|
ipv6precedence(10),
|
|
srcport(11),
|
|
dstport(12)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The ethernet frame selector.
|
|
dstmac - based on destination MAC address.
|
|
srcmac - based on source MAC address.
|
|
ethernetpriority - based on ethernet priority.
|
|
vlanid - based on VLAN ID.
|
|
ethernettype - based on ethernet type.
|
|
dstip - based on destination IP address.
|
|
srcip - based on source IP address.
|
|
ipprototype - based on IP type(ipv4 or ipv6).
|
|
ipv4tosdscp - based on IP TOS/DSCP.
|
|
ipv6 - based IP precedence.
|
|
srcport - based on layer 4 source port.
|
|
dstport - based on layer 4 destination port.
|
|
"
|
|
::= { h3cEponUniQosRuleEntry 2 }
|
|
|
|
h3cEponUniQosRuleValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The rule value based on the h3cEponUniQosRuleSelector.
|
|
"
|
|
::= { h3cEponUniQosRuleEntry 3 }
|
|
|
|
h3cEponUniQosRuleMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
MAC Address.
|
|
"
|
|
::= { h3cEponUniQosRuleEntry 4 }
|
|
|
|
h3cEponUniQosRuleOperator OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nevermatch(1),
|
|
equal(2),
|
|
notequal(3),
|
|
lessthanequal(4),
|
|
greaterthanequal(5),
|
|
fieldexist(6),
|
|
fieldnotexist(7),
|
|
alwaysmatch(8)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
nervermatch - value never match.
|
|
equal - field equal to the value.
|
|
notequal - field not equal to the value.
|
|
lessthanequal - field less than or equal to the value.
|
|
greaterthanequal - field greater than or equal to the value.
|
|
fieldexist - value is ignored if field exists.
|
|
fieldnotexist - value is ignored if field does not exist.
|
|
alwaysmatch - value always match.
|
|
"
|
|
::= { h3cEponUniQosRuleEntry 5 }
|
|
|
|
h3cEponUniQosRuleRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The status of this table entry. Only active,
|
|
createAndGo and the destory are supported.
|
|
"
|
|
::= { h3cEponUniQosRuleEntry 6 }
|
|
|
|
--
|
|
-- h3cEponUniMirrorGroupTable
|
|
--
|
|
|
|
h3cEponUniMirrorGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniMirrorGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Qos sub rule of the UNI.
|
|
"
|
|
::= { h3cEponUniSysMan 13 }
|
|
|
|
h3cEponUniMirrorGroupEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniMirrorGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of the h3cEponUniMirrorGroupTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniMirrorGroupID
|
|
}
|
|
::= { h3cEponUniMirrorGroupTable 1 }
|
|
|
|
H3cEponUniMirrorGroupEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniMirrorGroupID Integer32,
|
|
h3cEponUniMirrorInboundPortList OCTET STRING,
|
|
h3cEponUniMirrorOutboundPortList OCTET STRING,
|
|
h3cEponUniMonitorPort Integer32,
|
|
h3cEponUniMirrorRowStatus RowStatus
|
|
}
|
|
|
|
h3cEponUniMirrorGroupID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Epon UNI mirror group ID."
|
|
::= { h3cEponUniMirrorGroupEntry 1 }
|
|
|
|
h3cEponUniMirrorInboundPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI inbound port list.
|
|
Each octet within this value specifies a set of eight ports,
|
|
with the first octet specifying ports 1 through 8, the second
|
|
octet specifying ports 9 through 16, etc. Within each octet,
|
|
the most significant bit represents the highest numbered UNI,
|
|
and the least significant bit represents the lowest numbered UNI.
|
|
Thus, each UNI port is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1' then that
|
|
port is allowed in the set of ports. the port is not allowed if
|
|
its bit has a value of '0'.
|
|
"
|
|
::= { h3cEponUniMirrorGroupEntry 2 }
|
|
|
|
h3cEponUniMirrorOutboundPortList OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI outnbound port list, more infomation reference h3cEponUniMirrorInboundPortList
|
|
"
|
|
::= { h3cEponUniMirrorGroupEntry 3 }
|
|
|
|
h3cEponUniMonitorPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI monitor port.
|
|
"
|
|
::= { h3cEponUniMirrorGroupEntry 4 }
|
|
|
|
h3cEponUniMirrorRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
RowStatus, Now support three status: createAndGo, active, destroy.
|
|
"
|
|
::= { h3cEponUniMirrorGroupEntry 5 }
|
|
|
|
--
|
|
-- h3cEponUniMirrorGroupIdNextTable
|
|
--
|
|
|
|
h3cEponUniMirrorGroupIdNextTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniMirrorGroupIdNextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The next index table, which is used by h3cEponUniMirrorGroupTable.
|
|
"
|
|
::= { h3cEponUniSysMan 14 }
|
|
|
|
h3cEponUniMirrorGroupIdNextEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniMirrorGroupIdNextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of the table h3cEponUniMirrorGroupIdNextEntry.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { h3cEponUniMirrorGroupIdNextTable 1 }
|
|
|
|
H3cEponUniMirrorGroupIdNextEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniMirrorGroupIDNext Integer32
|
|
}
|
|
|
|
h3cEponUniMirrorGroupIDNext OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object contains an appropriate value to be used for
|
|
h3cEponUniMirrorGroupID when creating rows in the
|
|
h3cEponUniMirrorGroupTable.
|
|
"
|
|
::= { h3cEponUniMirrorGroupIdNextEntry 1 }
|
|
|
|
--
|
|
-- h3cEponUniMulticastCtrlInfoTable
|
|
--
|
|
|
|
h3cEponUniMulticastCtrlInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniMulticastCtrlInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
UNI multicast information which is active .
|
|
"
|
|
::= { h3cEponUniSysMan 15 }
|
|
|
|
h3cEponUniMulticastCtrlInfoEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniMulticastCtrlInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of the table h3cEponUniMulticastCtrlInfoTable.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex,
|
|
h3cEponUniMultActVlan,
|
|
h3cEponUniMultActAddress
|
|
}
|
|
::= { h3cEponUniMulticastCtrlInfoTable 1 }
|
|
|
|
H3cEponUniMulticastCtrlInfoEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniMultActVlan Integer32,
|
|
h3cEponUniMultActAddress IpAddress,
|
|
h3cEponUniMultActAccessRule INTEGER,
|
|
h3cEponUniMultActPreTimes Integer32,
|
|
h3cEponUniMultActPreRemain Integer32
|
|
}
|
|
|
|
h3cEponUniMultActVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The multicast vlan ID which is active.
|
|
"
|
|
::= { h3cEponUniMulticastCtrlInfoEntry 1 }
|
|
|
|
h3cEponUniMultActAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The multicast address which is active.
|
|
"
|
|
::= { h3cEponUniMulticastCtrlInfoEntry 2 }
|
|
|
|
h3cEponUniMultActAccessRule OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(1),
|
|
permit(2),
|
|
preview(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
deny - deny the multicast packet.
|
|
permit - permit the multicast packet.
|
|
preview - permit the multicast packet with conditions.
|
|
"
|
|
::= { h3cEponUniMulticastCtrlInfoEntry 3 }
|
|
|
|
h3cEponUniMultActPreTimes OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The number of multicast preview times which is active.
|
|
"
|
|
::= { h3cEponUniMulticastCtrlInfoEntry 4 }
|
|
|
|
h3cEponUniMultActPreRemain OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The remanent time slice of multicast preview which is active.
|
|
"
|
|
::= { h3cEponUniMulticastCtrlInfoEntry 5 }
|
|
|
|
--
|
|
-- h3cEponUniMulticastIndexNextTable
|
|
--
|
|
|
|
h3cEponUniMulticastIndexNextTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF H3cEponUniMulticastIndexNextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The next index table, which is used by h3cEponUniMulticastControlTable.
|
|
"
|
|
::= { h3cEponUniSysMan 16 }
|
|
|
|
h3cEponUniMulticastIndexNextEntry OBJECT-TYPE
|
|
SYNTAX H3cEponUniMulticastIndexNextEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The entry of the table h3cEponUniMulticastIndexNextEntry.
|
|
"
|
|
INDEX
|
|
{
|
|
ifIndex,
|
|
h3cEponUniIndex
|
|
}
|
|
::= { h3cEponUniMulticastIndexNextTable 1 }
|
|
|
|
H3cEponUniMulticastIndexNextEntry ::= SEQUENCE
|
|
{
|
|
h3cEponUniMulticastConfIndexNext Integer32
|
|
}
|
|
|
|
h3cEponUniMulticastConfIndexNext OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
This object contains an appropriate value to be used for
|
|
h3cEponUniMulticastIndex when creating rows in the
|
|
h3cEponUniMulticastControlTable.
|
|
"
|
|
::= { h3cEponUniMulticastIndexNextEntry 1 }
|
|
|
|
--
|
|
-- h3cEponUni NOTIFICATION
|
|
--
|
|
|
|
h3cEponUniTrap OBJECT IDENTIFIER ::= { h3cEponUni 2 }
|
|
|
|
h3cEponUniTrapPrefix OBJECT IDENTIFIER ::= { h3cEponUniTrap 0 }
|
|
|
|
h3cEponUniLinkUpTrap NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cEponUniIndex,
|
|
h3cEponUniDescr,
|
|
h3cEponUniAdminStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A h3cEponUniLinkUpTrap notification is sent
|
|
when the UNI up event is detected
|
|
and the transmitting switch is turned on.
|
|
"
|
|
::= { h3cEponUniTrapPrefix 1 }
|
|
|
|
h3cEponUniLinkDownTrap NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ifIndex,
|
|
ifDescr,
|
|
h3cEponUniIndex,
|
|
h3cEponUniDescr,
|
|
h3cEponUniAdminStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
A h3cEponUniLinkDownTrap notification is sent
|
|
when the UNI down event is detected
|
|
and the transmitting switch is turned on.
|
|
"
|
|
::= { h3cEponUniTrapPrefix 2 }
|
|
|
|
END
|