WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zte/ZTE-AN-XDSL2-MIBII

9455 lines
388 KiB
Plaintext
Raw Permalink Blame History

--------------------------------------------------------------------------
-- File Name : ZTE-AN-VDSL-MIBII.mib
-- Date : 2008-4-9
-- Author : ZTE Nms dept.
--
-- Zte VDSL Mib for Access Node
--------------------------------------------------------------------------
ZTE-AN-XDSL2-MIBII DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,Integer32, Counter32,
NOTIFICATION-TYPE FROM SNMPv2-SMI
enterprises FROM SNMPv2-SMI
ifIndex FROM IF-MIB
DisplayString,TEXTUAL-CONVENTION,TruthValue,RowStatus FROM SNMPv2-TC
HCPerfIntervalThreshold,HCPerfTimeElapsed FROM HC-PerfHist-TC-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
xdsl2PMLineCurrEntry,xdsl2PMLineHist15MinEntry,xdsl2PMLineHist1DayEntry,
xdsl2PMChCurrEntry,xdsl2PMChHist15MinEntry,xdsl2PMChHist1DEntry,
xdsl2SCStatusDirection, xdsl2SCStatusSegment,xdsl2LineBandEntry
FROM VDSL2-LINE-MIB
Xdsl2Unit, Xdsl2Direction, Xdsl2Band, Xdsl2TransmissionModeType,
Xdsl2RaMode,Xdsl2InitResult,Xdsl2OperationModes,Xdsl2PowerMngState,
Xdsl2ConfPmsForce,Xdsl2LinePmMode,
Xdsl2LineLdsf,Xdsl2LdsfResult,Xdsl2SymbolProtection,
Xdsl2MaxBer,Xdsl2ScMaskDs,Xdsl2ScMaskUs,Xdsl2CarMask,
Xdsl2PsdMaskDs, Xdsl2PsdMaskUs, Xdsl2Tssi,
Xdsl2LastTransmittedState, Xdsl2LineStatus,
Xdsl2ChAtmStatus, Xdsl2ChPtmStatus, Xdsl2UpboKLF, Xdsl2BandUs,
Xdsl2LineProfiles, Xdsl2LineUs0Mask, Xdsl2LineClassMask,
Xdsl2LineLimitMask, Xdsl2LineUs0Disable, Xdsl2RfiBands,
Xdsl2LineSnrMode,Xdsl2LineBpsc,Xdsl2BpscResult,Xdsl2LineReset,
Xdsl2SymbolProtection8,Xdsl2ChInitPolicy,Xdsl2LineCeFlag,
Xdsl2MrefPsdDs,Xdsl2MrefPsdUs,Xdsl2LinePsdMaskSelectUs
FROM VDSL2-LINE-TC-MIB
ZxAnIfindex FROM ZTE-AN-TC-MIB
ZxAnXdsl2TransmissionModeType FROM ZTE-AN-XDSL2-MIB;
zxAnXdsl2Mib MODULE-IDENTITY
LAST-UPDATED "200901061500Z"
ORGANIZATION "ZTE Corporation"
CONTACT-INFO "ZTE NMS dept.
Su Chunshan 68896292 "
DESCRIPTION "This MIB defines managed objects of zte xDSL mgmt . "
::= { zxAn 1001 }
zte OBJECT IDENTIFIER ::= { enterprises 3902 }
zxAn OBJECT IDENTIFIER ::= { zte 1015 }
zxAnXdsl2Objects OBJECT IDENTIFIER ::= {zxAnXdsl2Mib 1}
zxAnXdsl2TrapObjects OBJECT IDENTIFIER ::= {zxAnXdsl2Mib 3}
zxAnXdsl2GlobalObjects OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 1}
zxAnXdsl2Line OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 2}
zxAnXdsl2LineProfile OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 3}
zxAnXdsl2AlarmProfile OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 4}
zxAnXdsl2PMLine OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 5}
zxAnXdsl2PMChannel OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 6}
zxAnXdsl2LineTest OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 7}
zxAnXdsl2Vectoring OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 8}
zxAnXdsl2Status OBJECT IDENTIFIER ::= {zxAnXdsl2Objects 9}
--------------------------------------------------------------------------
-- Following objects are defined.
-- zxAnXdsl2GlobalObjects
-- zxAnXdsl2LnTable
-- zxAnXdsl2DsDataRateConfPrfTable
-- zxAnXdsl2UsDataRateConfPrfTable
-- zxAnXdsl2SpectrumConfPrfTable
-- zxAnXdsl2DpboConfPrfTable
-- zxAnXdsl2UpboConfPrfTable
-- zxAnXdsl2SnrMarginConfPrfTable
-- zxAnXdsl2DelayInpConfPrfTable
-- zxAnXdsl2VirtualNoiseConfPrfTable
-- zxAnXdsl2RfiConfPrfTable
-- zxAnXdsl2ProfModeSpecTable
-- zxAnXdsl2ExtConfPrfTable
-- zxAnXdsl2SosConfPrfTable
-- zxAnXdsl2InmConfPrfTable
-- zxAnXdsl2AlmThreshPrfTable
-- zxAnXdsl2PMLineCurrTable
-- zxAnXdsl2PMLineHist15MinTable
-- zxAnXdsl2PMLineHist1DayTable
-- zxAnXdsl2PMChCurrTable
-- zxAnXdsl2PMChHist15MinTable
-- zxAnXdsl2PMChHist1DayTable
-- zxAnXdsl2SeltConfTable
-- zxAnXdsl2SeltLineStatusTable
-- zxAnXdsl2SeltSCStatusTable
-- zxAnXdsl2MeltConfTable
-- zxAnXdsl2MeltStatusTable
-- zxAnXdsl2FextCoefficientTable
-- zxAnXdsl2VectoringCrosstalkTable
-- zxAnXdsl2SCStatusTable
-- zxAnXdsl2SeltRawDataTable
-- zxAnXdsl2XlogSampleTable
-- Trap
-- xdsl2LineBandTable see VDSL2-LINE-MIB xdsl2LineBandTable
-- xdsl2ChannelStatusTable see VDSL2-LINE-MIB xdsl2ChannelStatusTable
-- xdsl2SCStatusTable see VDSL2-LINE-MIB xdsl2SCStatusTable
-- xdsl2LineSegmentTable see VDSL2-LINE-MIB xdsl2LineSegmentTable
-- xdsl2SCStatusSegmentTable see VDSL2-LINE-MIB xdsl2SCStatusSegmentTable
-- xdsl2LineInventoryTable see VDSL2-LINE-MIB xdsl2LineInventoryTable
-- xdsl2PMLineCurrTable see VDSL2-LINE-MIB xdsl2PMLineCurrTable
-- xdsl2PMLineCurrInitTable see VDSL2-LINE-MIB xdsl2PMLineCurrInitTable
-- xdsl2PMChCurrTable see VDSL2-LINE-MIB xdsl2PMChCurrTable
--------------------------------------------------------------------------
--------------------------------------------------------------------------
-- zxAnXdsl2GlobalObjects
--------------------------------------------------------------------------
ZxAnXdsl2OperationModes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The VDSL2 management model specified includes an xDSL Mode
attribute which identifies an instance of xDSL Mode-Specific
PSD Configuration object in the xDSL Line Profile. The
following classes of xDSL operating mode are defined.
The notes (F) and (L) denote Full-Rate and Lite/splitterless
respectively:
+-------+--------------------------------------------------+
| Value | xDSL operation mode description |
+-------+--------------------------------------------------+
1 - The default/generic PSD configuration. Default
configuration will be used when no other matching
mode specific configuration can be found.
2 - Regional Std. (ANSI T1.413) (F)
3 - Regional Std. (ETSI DTS/TM06006) (F)
4 - G.992.1 POTS non-overlapped (F)
5 - G.992.1 POTS overlapped (F)
6 - G.992.1 ISDN non-overlapped (F)
7 - G.992.1 ISDN overlapped (F)
8 - G.992.1 TCM-ISDN non-overlapped (F)
9 - G.992.1 TCM-ISDN overlapped (F)
10 - G.992.2 POTS non-overlapped (L)
11 - G.992.2 POTS overlapped (L)
12 - G.992.2 with TCM-ISDN non-overlapped (L)
13 - G.992.2 with TCM-ISDN overlapped (L)
14 - G.992.1 TCM-ISDN symmetric (F) --- not in G.997.1
15-19 - Unused. Reserved for future ITU-T specification.
20 - G.992.3 POTS non-overlapped (F)
21 - G.992.3 POTS overlapped (F)
22 - G.992.3 ISDN non-overlapped (F)
23 - G.992.3 ISDN overlapped (F)
24-25 - Unused. Reserved for future ITU-T specification.
26 - G.992.4 POTS non-overlapped (L)
27 - G.992.4 POTS overlapped (L)
28-29 - Unused. Reserved for future ITU-T specification.
30 - G.992.3 Annex I All-Digital non-overlapped (F)
31 - G.992.3 Annex I All-Digital overlapped (F)
32 - G.992.3 Annex J All-Digital non-overlapped (F)
33 - G.992.3 Annex J All-Digital overlapped (F)
34 - G.992.4 Annex I All-Digital non-overlapped (L)
35 - G.992.4 Annex I All-Digital overlapped (L)
36 - G.992.3 Annex L POTS non-overlapped, mode 1,
wide U/S (F)
37 - G.992.3 Annex L POTS non-overlapped, mode 2,
narrow U/S(F)
38 - G.992.3 Annex L POTS overlapped, mode 3,
wide U/S (F)
39 - G.992.3 Annex L POTS overlapped, mode 4,
narrow U/S (F)
40 - G.992.3 Annex M POTS non-overlapped (F)
41 - G.992.3 Annex M POTS overlapped (F)
42 - G.992.5 POTS non-overlapped (F)
43 - G.992.5 POTS overlapped (F)
44 - G.992.5 ISDN non-overlapped (F)
45 - G.992.5 ISDN overlapped (F)
46-47 - Unused. Reserved for future ITU-T specification.
48 - G.992.5 Annex I All-Digital non-overlapped (F)
49 - G.992.5 Annex I All-Digital overlapped (F)
50 - G.992.5 Annex J All-Digital non-overlapped (F)
51 - G.992.5 Annex J All-Digital overlapped (F)
52 - G.992.5 Annex M POTS non-overlapped (F)
53 - G.992.5 Annex M POTS overlapped (F)
54-57 - Unused. Reserved for future ITU-T specification.
58 - G.993.2 Annex A
59 - G.993.2 Annex B
60 - G.993.2 Annex C
250 - G.993.2 Annex A Protection
251 - G.993.2 Annex B Protection
252 - G.993.2 Annex C Protection
253 - G.993.5 Annex A
254 - G.993.5 Annex B
255 - G.993.5 Annex C
"
SYNTAX INTEGER {
defMode(1),
ansit1413(2),
etsi(3),
g9921PotsNonOverlapped(4),
g9921PotsOverlapped(5),
g9921IsdnNonOverlapped(6),
g9921isdnOverlapped(7),
g9921tcmIsdnNonOverlapped(8),
g9921tcmIsdnOverlapped(9),
g9922potsNonOverlapped(10),
g9922potsOverlapped(11),
g9922tcmIsdnNonOverlapped(12),
g9922tcmIsdnOverlapped(13),
g9921tcmIsdnSymmetric(14),
g9923PotsNonOverlapped(20),
g9923PotsOverlapped(21),
g9923IsdnNonOverlapped(22),
g9923isdnOverlapped(23),
g9924potsNonOverlapped(26),
g9924potsOverlapped(27),
g9923AnnexIAllDigNonOverlapped(30),
g9923AnnexIAllDigOverlapped(31),
g9923AnnexJAllDigNonOverlapped(32),
g9923AnnexJAllDigOverlapped(33),
g9924AnnexIAllDigNonOverlapped(34),
g9924AnnexIAllDigOverlapped(35),
g9923AnnexLMode1NonOverlapped(36),
g9923AnnexLMode2NonOverlapped(37),
g9923AnnexLMode3Overlapped(38),
g9923AnnexLMode4Overlapped(39),
g9923AnnexMPotsNonOverlapped(40),
g9923AnnexMPotsOverlapped(41),
g9925PotsNonOverlapped(42),
g9925PotsOverlapped(43),
g9925IsdnNonOverlapped(44),
g9925isdnOverlapped(45),
g9925AnnexIAllDigNonOverlapped(48),
g9925AnnexIAllDigOverlapped(49),
g9925AnnexJAllDigNonOverlapped(50),
g9925AnnexJAllDigOverlapped(51),
g9925AnnexMPotsNonOverlapped(52),
g9925AnnexMPotsOverlapped(53),
g9932AnnexA(58),
g9932AnnexB(59),
g9932AnnexC(60),
g9932AnnexAProtection(250),
g9932AnnexBProtection(251),
g9932AnnexCProtection(252),
g9935AnnexA(253),
g9935AnnexB(254),
g9935AnnexC(255)
}
zxAnXdsl2Capabilities OBJECT-TYPE
SYNTAX BITS
{
maxDelay(0),
chanInitPolicy(1),
fextCancelNotReqBand(2),
minSosBitRate(3),
inpMinShineAndRein(4),
esLossRatio(5),
leftrsThresh(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management capabilities of VDSL.
The bit value 1 means the function represented by this bit is
supported by this equipment.
bit 0: value 1 means extend profile supports downstream and
upstream maximum delay.
bit 1: value 1 means extend profile supports downstream and
upstream channel initialisation policy.
bit 2: value 1 means extend profile supports downstream and
upstream FEXT cancellation not required band.
bit 3: value 1 means zxAnXdsl2DsDataRateConfPrfTable supports
zxAnXdsl2ChConfMinSosBitRateDs and
zxAnXdsl2UsDataRateConfPrfTable supports
zxAnXdsl2ChConfMinSosBitRateUs.
bit 4: value 1 means extend profile supports downstream and
upstream INPMIN_SHINE_RTX, INPMIN8_SHINE_RTX and
INPMIN8_REIN_RTX.
bit 5: value 1 means alarm profile supports
zxAnXdsl2XtucEsLossRatioThresh and
zxAnXdsl2XturEsLossRatioThresh.
bit 6: value 1 means alarm profile supports
zxAnXdsl2XtucThreshInpLeftrs and
zxAnXdsl2XturThreshInpLeftrs.
NOTE: No recommended to display it in NMS."
::= { zxAnXdsl2GlobalObjects 1 }
--------------------------------------------------------------------------
-- zxAnXdsl2LnTable
--------------------------------------------------------------------------
zxAnXdsl2LnTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2LnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2LnTable contains configuration,
command and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx).
Several objects in this table MUST be maintained in a
persistent manner. "
::= { zxAnXdsl2Line 10 }
zxAnXdsl2LnEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2LnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2LnTable contains configuration,
commands and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line."
INDEX { ifIndex }
::= { zxAnXdsl2LnTable 1 }
ZxAnXdsl2LnEntry ::=
SEQUENCE {
zxAnXdsl2LnCh1DsDataRateConfPrf DisplayString,
zxAnXdsl2LnCh2DsDataRateConfPrf DisplayString,
zxAnXdsl2LnCh3DsDataRateConfPrf DisplayString,
zxAnXdsl2LnCh4DsDataRateConfPrf DisplayString,
zxAnXdsl2LnCh1UsDataRateConfPrf DisplayString,
zxAnXdsl2LnCh2UsDataRateConfPrf DisplayString,
zxAnXdsl2LnCh3UsDataRateConfPrf DisplayString,
zxAnXdsl2LnCh4UsDataRateConfPrf DisplayString,
zxAnXdsl2LnSpectrumConfPrf DisplayString,
zxAnXdsl2LnDpboConfPrf DisplayString,
zxAnXdsl2LnUpboConfPrf DisplayString,
zxAnXdsl2LnSnrMarginConfPrf DisplayString,
zxAnXdsl2LnCh1DelayInpConfPrf DisplayString,
zxAnXdsl2LnCh2DelayInpConfPrf DisplayString,
zxAnXdsl2LnCh3DelayInpConfPrf DisplayString,
zxAnXdsl2LnCh4DelayInpConfPrf DisplayString,
zxAnXdsl2LnRfiConfPrf DisplayString,
zxAnXdsl2LnVirtualNoiseConfPrf DisplayString,
zxAnXdsl2LnAlmThreshPrfName DisplayString,
zxAnXdsl2LnCmndConfPmsf Xdsl2ConfPmsForce,
zxAnXdsl2LnCmndConfLdsf Xdsl2LineLdsf,
zxAnXdsl2LnCmndConfLdsfFailReason Xdsl2LdsfResult,
zxAnXdsl2LnCmndConfBpsc Xdsl2LineBpsc,
zxAnXdsl2LnCmndConfBpscFailReason Xdsl2BpscResult,
zxAnXdsl2LnCmndConfBpscReqCount Unsigned32,
zxAnXdsl2LnCmndAutomodeColdStart TruthValue,
zxAnXdsl2LnCmndConfReset Xdsl2LineReset,
zxAnXdsl2LnStatusXtuTransSys ZxAnXdsl2TransmissionModeType,
zxAnXdsl2LnStatusPwrMngState Xdsl2PowerMngState,
zxAnXdsl2LnStatusInitResult INTEGER,
zxAnXdsl2LnStatusLastStateDs Xdsl2LastTransmittedState,
zxAnXdsl2LnStatusLastStateUs Xdsl2LastTransmittedState,
zxAnXdsl2LnStatusXtur BITS,
zxAnXdsl2LnStatusXtuc BITS,
zxAnXdsl2LnStatusAttainRateDs Unsigned32,
zxAnXdsl2LnStatusAttainRateUs Unsigned32,
zxAnXdsl2LnStatusActPsdDs Integer32,
zxAnXdsl2LnStatusActPsdUs Integer32,
zxAnXdsl2LnStatusActAtpDs Integer32,
zxAnXdsl2LnStatusActAtpUs Integer32,
zxAnXdsl2LnStatusActProfile Xdsl2LineProfiles,
zxAnXdsl2LnStatusActLimitMask Xdsl2LineLimitMask,
zxAnXdsl2LnStatusActUs0Mask Xdsl2LineUs0Mask,
zxAnXdsl2LnStatusActSnrModeDs Xdsl2LineSnrMode,
zxAnXdsl2LnStatusActSnrModeUs Xdsl2LineSnrMode,
zxAnXdsl2LnStatusActElPolicy Unsigned32,
zxAnXdsl2LnStatusElectLenDs Unsigned32,
zxAnXdsl2LnStatusElectLenUs Unsigned32,
zxAnXdsl2LnStatusActKl0 Unsigned32,
zxAnXdsl2LnStatusTssiDs Xdsl2Tssi,
zxAnXdsl2LnStatusTssiUs Xdsl2Tssi,
zxAnXdsl2LnStatusMrefPsdDs Xdsl2MrefPsdDs,
zxAnXdsl2LnStatusMrefPsdUs Xdsl2MrefPsdUs,
zxAnXdsl2LnStatusTrellisDs TruthValue,
zxAnXdsl2LnStatusTrellisUs TruthValue,
zxAnXdsl2LnStatusActualCe Unsigned32,
zxAnXdsl2LnStatusClassMask Xdsl2LineClassMask,
zxAnXdsl2LnStatusOperState INTEGER,
zxAnXdsl2LnStatusActDataPathType INTEGER,
zxAnXdsl2LnStatusDataPathType INTEGER,
zxAnXdsl2LnStatusBitswapDs INTEGER,
zxAnXdsl2LnStatusBitswapUs INTEGER,
zxAnXdsl2LnStatusHighRateLimit INTEGER,
zxAnXdsl2LnExtConfPrf DisplayString,
zxAnXdsl2LnStatusPrevAttainRateDs Unsigned32,
zxAnXdsl2LnStatusPrevAttainRateUs Unsigned32,
zxAnXdsl2LnCmndPMReset BITS,
zxAnXdsl2LnCustomizedCapability BITS,
zxAnXdsl2LnInpEtrDs Unsigned32,
zxAnXdsl2LnInpEtrUs Unsigned32,
zxAnXdsl2LnInpEftrDs Unsigned32,
zxAnXdsl2LnInpEftrUs Unsigned32,
zxAnXdsl2LnInpMinEftrDs Unsigned32,
zxAnXdsl2LnInpMinEftrUs Unsigned32,
zxAnXdsl2LnInpActDelayDs INTEGER,
zxAnXdsl2LnInpActDelayUs INTEGER,
zxAnXdsl2LnFextCancellationDs INTEGER,
zxAnXdsl2LnFextCancellationUs INTEGER,
zxAnXdsl2LnSosConfPrf DisplayString,
zxAnXdsl2LnStatusLnAttenDs Integer32,
zxAnXdsl2LnStatusLnAttenUs Integer32,
zxAnXdsl2LnStatusSigAttenDs Integer32,
zxAnXdsl2LnStatusSigAttenUs Integer32,
zxAnXdsl2LnStatusSnrMarginDs Integer32,
zxAnXdsl2LnStatusSnrMarginUs Integer32,
zxAnXdsl2LnInmConfPrf DisplayString,
zxAnXdsl2LnLofStatsDs Counter32,
zxAnXdsl2LnLofStatsUs Counter32,
zxAnXdsl2LnLolStatsDs Counter32,
zxAnXdsl2LnLolStatsUs Counter32,
zxAnXdsl2LnLprStatsDs Counter32,
zxAnXdsl2LnLprStatsUs Counter32,
zxAnXdsl2LnActInpShineDs Integer32,
zxAnXdsl2LnActInpShineUs Integer32,
zxAnXdsl2LnActInpReinDs Integer32,
zxAnXdsl2LnActInpReinUs Integer32,
zxAnXdsl2LnStatusActRaModeDs INTEGER,
zxAnXdsl2LnStatusActRaModeUs INTEGER,
zxAnXdsl2LnStatusRtxUsedDs INTEGER,
zxAnXdsl2LnStatusRtxUsedus INTEGER
}
zxAnXdsl2LnCh1DsDataRateConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 1 }
zxAnXdsl2LnCh2DsDataRateConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 2 }
zxAnXdsl2LnCh3DsDataRateConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 3 }
zxAnXdsl2LnCh4DsDataRateConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 4 }
zxAnXdsl2LnCh1UsDataRateConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 5 }
zxAnXdsl2LnCh2UsDataRateConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 6 }
zxAnXdsl2LnCh3UsDataRateConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 7 }
zxAnXdsl2LnCh4UsDataRateConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 8 }
zxAnXdsl2LnSpectrumConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Spectrum Profile Table, (zxAnXdsl2SpectrumConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 9 }
zxAnXdsl2LnDpboConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Dpbo Profile Table, (zxAnXdsl2DpboConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 10 }
zxAnXdsl2LnUpboConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Upbo Profile Table, (zxAnXdsl2UpboConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 11 }
zxAnXdsl2LnSnrMarginConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Noise Margin Profile Table, (zxAnXdsl2SnrMarginConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 12 }
zxAnXdsl2LnCh1DelayInpConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 13 }
zxAnXdsl2LnCh2DelayInpConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 14 }
zxAnXdsl2LnCh3DelayInpConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 15 }
zxAnXdsl2LnCh4DelayInpConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 16 }
zxAnXdsl2LnRfiConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
RFI Profile Table, (zxAnXdsl2RfiConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 17 }
zxAnXdsl2LnVirtualNoiseConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Virtual Noise Profile Table, (zxAnXdsl2VirtualNoiseConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 18 }
zxAnXdsl2LnAlmThreshPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Alarm Configuration Profile Table,
(zxAnXdsl2LnAlarmConfPrfTable), which applies to this line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 19 }
zxAnXdsl2LnCmndConfPmsf OBJECT-TYPE
SYNTAX Xdsl2ConfPmsForce
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command:Power management state forced (PMSF). Defines the line
states to be forced by the near-end xTU on this line.
The various possible values are:
l3toL0 (0),
l0toL2 (2),
l0orL2toL3 (3).
This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.3"
DEFVAL { l3toL0 }
::= { zxAnXdsl2LnEntry 20 }
zxAnXdsl2LnCmndConfLdsf OBJECT-TYPE
SYNTAX Xdsl2LineLdsf
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command:Loop diagnostics mode forced (LDSF). Defines whether the
line should be forced into the loop diagnostics mode by the
near-end xTU on this line or only be responsive to loop
diagnostics initiated by the far-end xTU.
This object MUST be maintained in a persistent manner.
However, in case the operator forces loop diagnostics mode
then the access node should reset the object (inhibit) when
loop diagnostics mode procedures are completed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.8"
DEFVAL { inhibit }
::= { zxAnXdsl2LnEntry 21 }
zxAnXdsl2LnCmndConfLdsfFailReason OBJECT-TYPE
SYNTAX Xdsl2LdsfResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Command:The status of the recent occasion the Loop diagnostics mode
forced (LDSF) was issued for the associated line. Possible
values are:
none (1) - The default value in case LDSF was never
requested for the associated line.
success (2) - The recent command completed
successfully.
inProgress (3) - The Loop Diagnostics process is in
progress.
unsupported (4) - The NE or the line card doesn't support
LDSF.
cannotRun (5) - The NE cannot initiate the command, due
to a non specific reason.
aborted (6) - The Loop Diagnostics process aborted.
failed (7) - The Loop Diagnostics process failed.
illegalMode (8) - The NE cannot initiate the command, due
to the specific mode of the relevant
line.
adminUp (9) - The NE cannot initiate the command, as
the relevant line is administratively
'Up'.
tableFull (10)- The NE cannot initiate the command, due
to reaching the maximum number of rows
in the results table.
noResources (11)- The NE cannot initiate the command, due
to lack of internal memory resources."
DEFVAL { none }
::= { zxAnXdsl2LnEntry 22 }
zxAnXdsl2LnCmndConfBpsc OBJECT-TYPE
SYNTAX Xdsl2LineBpsc
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command:Request a bits per sub-carrier measurement to be made.
A request for a bits per sub-carrier measurement is made
by setting this attribute to the value of measure(2).
Upon completion of the measurement request,
the Access Node shall set this attribute to idle(1).
Note that a bits per sub-carrier measurement is also
performed during a line diagnostic procedure. This
attribute provides an additional mechanism to fetch
the bits per sub-carrier data. This additional
mechanism is provided so that bits per sub-carrier
data may be fetched without forcing the line into no
power state. This is useful because the bits per
sub-carrier allocation may be adjusted at show time
due to rate adaption and bit swapping.
The implementation of this additional mechanism for
measuring bits per sub-carrier is not mandatory.
The results of the bits per sub-carrier measurement are
stored in xdsl2LineSegmentTable. The status of the bits
per sub-carrier measurement is indicated by
xdsl2LineCmndConfBpscFailReason."
DEFVAL { idle }
::= { zxAnXdsl2LnEntry 23 }
zxAnXdsl2LnCmndConfBpscFailReason OBJECT-TYPE
SYNTAX Xdsl2BpscResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Command:The status of the most recent bits per sub-carrier
measurement request issued for the associated line.
Possible values are:
none (1) - The default value, in case a measurement
was never requested for the associated line.
success (2) - The recent measurement request completed
successfully.
inProgress (3) - The bits per sub-carrier measurement is in
progress.
unsupported (4) - The bits per sub-carrier request mechanism
is not supported.
failed (5) - The measurement request has failed and no
results are available.
noResources (6) - The NE cannot initiate the command, due
to lack of internal memory resources."
DEFVAL { none }
::= { zxAnXdsl2LnEntry 24 }
zxAnXdsl2LnCmndConfBpscReqCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Command:Measurement request counter.
This counter is incremented by one every time a request
for a measurement is made. A measurement request is made
by setting the xdsl2LineCmndConfBpsc attribute to the
value measure(2).
SNMP managers can use this attribute to check that the
measurement results retrieved by the manager where not
interupted by another measurement request."
DEFVAL { 0 }
::= { zxAnXdsl2LnEntry 25 }
zxAnXdsl2LnCmndAutomodeColdStart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command: Automode cold start forced. This parameter is defined
in order to improve testing of the performance of xTUs
supporting automode when it is enabled in the MIB.
Change the value of this parameter to 'true' indicates
a change in loop conditions applied to the devices under
test. The xTUs shall reset any historical information
used for automode and for shortening G.994.1 handshake
and initialization.
Automode is the case where multiple operation-modes are
enabled through the zxAnXdsl2LConfXtuTransSysEna object
in the line configuration profile being used for the
line, and where the selection of the actual
operation-mode depends not only on the common
capabilities of both xTUs (as exchanged in G.994.1), but
also on achievable data rates under given loop
conditions.
This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.10"
DEFVAL { false }
::= { zxAnXdsl2LnEntry 26 }
zxAnXdsl2LnCmndConfReset OBJECT-TYPE
SYNTAX Xdsl2LineReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command: Request a line reset to occur.
If this attribute is set to the value of reset(2), then
force the line to reset ( i.e. the modems will retrain ).
When the line has successfully reset, the SNMP agent will
set the value of this attribute to idle(1).
Note that the xdsl2LineCmndConfPmsf attribute will always
take precedence over this attribute.
If the xdsl2LineCmndConfPmsf attribute is set to the value
l0orL2toL3(3), then the line must not return to the
showtime state due to a reset request action performed
using this attribute."
DEFVAL { idle }
::= { zxAnXdsl2LnEntry 27 }
zxAnXdsl2LnStatusXtuTransSys OBJECT-TYPE
SYNTAX ZxAnXdsl2TransmissionModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The xTU Transmission System (xTS) in use.
It is coded in a bit-map representation with one bit set to
'1' (the selected coding for the DSL line). This
parameter
may be derived from the handshaking procedures defined in
Recommendation G.994.1. A set of xDSL line transmission
modes, with one bit per mode. "
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.1"
::= { zxAnXdsl2LnEntry 28 }
zxAnXdsl2LnStatusPwrMngState OBJECT-TYPE
SYNTAX Xdsl2PowerMngState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current power management state. One of four possible
power management states:
L0 - Synchronized and full transmission (i.e., Showtime),
L1 - Low Power with reduced net data rate (G.992.2 only),
L2 - Low Power with reduced net data rate (G.992.3 and
G.992.4 only),
L3 - No power
The various possible values are:l0(1), l1(2), l2(3), l3(4)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.2"
::= { zxAnXdsl2LnEntry 29 }
zxAnXdsl2LnStatusInitResult OBJECT-TYPE
SYNTAX INTEGER {
noFail (0),
configError (1),
configNotFeasible (2),
commFail (3),
noPeerAtu (4),
otherCause (5),
protocolInitFailure (254)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the result of the last full initialization
performed on the line. It is an enumeration type with the following
values: noFail(0), configError(1), configNotFeasible(2),
commFail(3), noPeerAtu(4), otherCause(5), protocolInitFailure(254).
noFail (0) - Successful initialization.
configError (1) - Configuration failure.
configNotFeasible (2) - Configuration details not supported.
commFail (3) - Communication failure.
noPeerAtu (4) - Peer ATU not detected.
otherCause (5) - Other initialization failure.
protocolInitFailure (254) - Protocol initialization failure.
"
::= { zxAnXdsl2LnEntry 30 }
zxAnXdsl2LnStatusLastStateDs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last successful transmitted initialization state in
the downstream direction in the last full initialization
performed on the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.7"
::= { zxAnXdsl2LnEntry 31 }
zxAnXdsl2LnStatusLastStateUs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last successful transmitted initialization state in the
upstream direction in the last full initialization performed
on the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.8"
::= { zxAnXdsl2LnEntry 32 }
zxAnXdsl2LnStatusXtur OBJECT-TYPE
SYNTAX BITS {
noDefect (0),
lossOfFraming (1),
lossOfSignal (2),
lossOfPower (3),
unused (4),
lossOfSignalQuality (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current state (existing failures) of the xTU-R.
This is a bit-map of possible conditions.
This BITS structure can report the following failures:
noDefect (0) - This bit position positively reports that
no defect or failure exist.
lossOfFraming (1) - xTU-R failure due to loss of frame
synchronization.
lossOfSignal (2) - xTU-R failure due to loss of signal.
lossOfPower (3) - xTU-R failure due to loss of power.Usually
this failure may be reported for CPE units
only.
unused (4) - This bit is never active on xTU-R.
lossOfSignalQuality (5) - Loss of Signal Quality is declared when
the Noise Margin falls below the Minimum
Noise Margin, or the bit-error-rate
exceeds 10^-7.
"
::= { zxAnXdsl2LnEntry 33 }
zxAnXdsl2LnStatusXtuc OBJECT-TYPE
SYNTAX BITS {
noDefect (0),
lossOfFraming (1),
lossOfSignal (2),
lossOfPower (3),
initFailure (4),
lossOfSignalQuality (5),
lossOfLink (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current state (existing failures) of the xTU-C.
This is a bit-map of possible conditions.
This BITS structure can report the following failures:
noDefect (0) - This bit position positively reports that
no defect or failure exist.
lossOfFraming (1) - xTU-C failure due to loss of frame
synchronization.
lossOfSignal (2) - xTU-C failure due to loss of signal.
lossOfPower (3) - xTU-C failure due to loss of power.Usually
this failure may be reported for CPE units
only.
initFailure (4) - Recent initialization process failed.
lossOfSignalQuality (5) - Loss of Signal Quality is declared when
the Noise Margin falls below the Minimum
Noise Margin, or the bit-error-rate
exceeds 10^-7.
lossOfLink (6) - xTU-C failure due to inability to link
with xTU-R.
"
::= { zxAnXdsl2LnEntry 34 }
zxAnXdsl2LnStatusAttainRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the xTU-C transmitter and the xTU-R receiver, coded in
bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.12"
::= { zxAnXdsl2LnEntry 35 }
zxAnXdsl2LnStatusAttainRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the
xTU-R transmitter and the xTU-C receiver, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.13"
::= { zxAnXdsl2LnEntry 36 }
zxAnXdsl2LnStatusActPsdDs OBJECT-TYPE
SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(Physical values are -90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.14"
::= { zxAnXdsl2LnEntry 37 }
zxAnXdsl2LnStatusActPsdUs OBJECT-TYPE
SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (Physical values
are -90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.15"
::= { zxAnXdsl2LnEntry 38 }
zxAnXdsl2LnStatusActAtpDs OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Transmit Power Downstream. The total
amount
of transmit power delivered by the xTU-C at the U-C reference
point, at the instant of measurement. It ranges from -310 to
310 units of 0.1 dB (Physical values are -31 to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.16"
::= { zxAnXdsl2LnEntry 39 }
zxAnXdsl2LnStatusActAtpUs OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Aggregate Transmit Power Upstream. The total amount
of
transmit power delivered by the xTU-R at the U-R
reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dB (Physical values are -31
to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.17"
::= { zxAnXdsl2LnEntry 40 }
zxAnXdsl2LnStatusActProfile OBJECT-TYPE
SYNTAX Xdsl2LineProfiles
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Standard Profile used by this connection."
::= { zxAnXdsl2LnEntry 41 }
zxAnXdsl2LnStatusActLimitMask OBJECT-TYPE
SYNTAX Xdsl2LineLimitMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Limit PSD mask and band plan in use.
The configuration parameter xdsl2LConfPrfLimitMask defines
the set of allowed G.993.2 limit PSD masks.
This parameter indicates the limit PSD mask in use on
this line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.3"
DEFVAL { {} }
::= { zxAnXdsl2LnEntry 42 }
zxAnXdsl2LnStatusActUs0Mask OBJECT-TYPE
SYNTAX Xdsl2LineUs0Mask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The US0 PSD mask in use.
The configuration parameter xdsl2LConfPrfUs0Mask defines
the set of allowed US0 PSD masks.
This parameter indicates the US0 PSD mask in use on
this line.
This parameter may be derived from the handshaking
procedures defined in ITU-T Rec. G.994.1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.4"
DEFVAL { {} }
::= { zxAnXdsl2LnEntry 43 }
zxAnXdsl2LnStatusActSnrModeDs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates if the transmitter
referred virtual noise is active on the line in the
downstream direction. "
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.15 (ACTSNRMODEds)"
::= { zxAnXdsl2LnEntry 44 }
zxAnXdsl2LnStatusActSnrModeUs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates if the transmitter
referred virtual noise is active on the line in the
upstream direction. "
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.18 (ACTSNRMODEus)"
::= { zxAnXdsl2LnEntry 45 }
zxAnXdsl2LnStatusActElPolicy OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual UPBO kl0 policy."
::= { zxAnXdsl2LnEntry 46 }
zxAnXdsl2LnStatusElectLenDs OBJECT-TYPE
SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(UPBOKLE)
This parameter contains the estimated electrical length of downstream
expressed in dB at 1 MHz, kl0. This is the final electrical
length that would have been sent from the VTU-O to VTU-R if
the electrical length was not forced by the CO-MIB.
The value ranges from 0 to 128 dB in steps of 0.1 dB."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.23"
DEFVAL { 0 }
::= { zxAnXdsl2LnEntry 47 }
zxAnXdsl2LnStatusElectLenUs OBJECT-TYPE
SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(UPBOKLE)
This parameter contains the estimated electrical length of upstream
expressed in dB at 1 MHz, kl0. This is the final electrical
length that would have been sent from the VTU-O to VTU-R if
the electrical length was not forced by the CO-MIB.
The value ranges from 0 to 128 dB in steps of 0.1 dB."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.23"
DEFVAL { 0 }
::= { zxAnXdsl2LnEntry 48 }
zxAnXdsl2LnStatusActKl0 OBJECT-TYPE
SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The actual kl0 used by the line."
::= { zxAnXdsl2LnEntry 49 }
zxAnXdsl2LnStatusTssiDs OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints of downstream expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets with the
following structure:
First 2 octets - Index of the subcarrier used in the context of
the breakpoint.
Third octet - The shaping parameter at the breakpoint.
Subcarrier index is an unsigned number in the range 1 to either
NSCds (downstream direction) or NSCus (upstream direction).
The shaping parameter value is in the range 0 to 127 (units of
-0.5dB). The special value 127 indicates that the subcarrier
is not transmitted."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.5 (TSSpsds)
and paragraph #7.5.1.29.6 (TSSpsus)"
::= { zxAnXdsl2LnEntry 50 }
zxAnXdsl2LnStatusTssiUs OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints of upstream expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets with the
following structure:
First 2 octets - Index of the subcarrier used in the context of
the breakpoint.
Third octet - The shaping parameter at the breakpoint.
Subcarrier index is an unsigned number in the range 1 to either
NSCds (downstream direction) or NSCus (upstream direction).
The shaping parameter value is in the range 0 to 127 (units of
-0.5dB). The special value 127 indicates that the subcarrier
is not transmitted."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.5 (TSSpsds)
and paragraph #7.5.1.29.6 (TSSpsus)"
::= { zxAnXdsl2LnEntry 51 }
zxAnXdsl2LnStatusMrefPsdDs OBJECT-TYPE
SYNTAX Xdsl2MrefPsdDs
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MEDLEY Reference PSD status parameters on
downstreasm direction expressed as the set of breakpoints
exchanged at initialization.
The OCTET STRING contains up to 48 pairs
of values in the following structure:
Octets 0&1 -- Index of 1st subcarrier used
in the context of a first breakpoint.
Octets 2&3 -- The PSD level for the
subcarrier indicated in octets 0&1.
Octets 4-7 -- Same, for a 2nd breakpoint
Octets 8-11 -- Same, for a 3rd breakpoint
And so on until
Octets 188-191 -- Same, for a 48th breakpoint.
Each subcarrier index is an unsigned number
in the range 1 and NSds (i.e., highest
supported sub carrier index on downstream
direction).
The PSD level is an integer value in the 0 to
4095 range. It is represented in units of 0.1
dB offset from -140dBm/Hz."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.7 (MREFpsds)"
::= { zxAnXdsl2LnEntry 52 }
zxAnXdsl2LnStatusMrefPsdUs OBJECT-TYPE
SYNTAX Xdsl2MrefPsdUs
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MEDLEY Reference PSD status parameters on
upstreasm direction expressed as the set of breakpoints
exchanged at initialization.
The OCTET STRING contains up to 32 pairs
of values in the following structure:
Octets 0&1 -- Index of 1st subcarrier used
in the context of a first breakpoint.
Octets 2&3 -- The PSD level for the
subcarrier indicated in octets 0&1.
Octets 4-7 -- Same, for a 2nd breakpoint
Octets 8-11 -- Same, for a 3rd breakpoint
And so on until
Octets 124-127 -- Same, for a 32nd breakpoint.
Each subcarrier index is an unsigned number
in the range 1 and NSus (i.e., highest
supported sub carrier index on upstream
direction).
The PSD level is an integer value in the 0 to
4095 range. It is represented in units of 0.1
dB offset from -140dBm/Hz."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.8 (MREFpsus)"
::= { zxAnXdsl2LnEntry 53 }
zxAnXdsl2LnStatusTrellisDs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter reports whether trellis coding
is in use in the downstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.30"
DEFVAL { false }
::= { zxAnXdsl2LnEntry 54 }
zxAnXdsl2LnStatusTrellisUs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter reports whether trellis coding
is in use in the upstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.31"
DEFVAL { false }
::= { zxAnXdsl2LnEntry 55 }
zxAnXdsl2LnStatusActualCe OBJECT-TYPE
SYNTAX Unsigned32 (2..16)
UNITS "N/32 samples"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(ACTUALCE)
This parameter reports the cyclic extension
used on the line. It is coded as an unsigned integer from
2 to 16 in units of N/32 samples, where 2N is the IDFT size."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.32"
DEFVAL { 2 }
::= { zxAnXdsl2LnEntry 56 }
zxAnXdsl2LnStatusClassMask OBJECT-TYPE
SYNTAX Xdsl2LineClassMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"(CLASSMASK).
In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks
(see LIMITMASK) are grouped in PSD mask classes.
Each class is designed such that the PSD levels of each
limit PSD mask of a specific class are equal in their
respective passband above 276 kHz.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfPrfXtuTransSysEna object. It selects a single
PSD mask class per Annex that is activated at the
VTU-O."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.15"
DEFVAL { a998ORb997M1cORc998B }
::= { zxAnXdsl2LnEntry 57 }
zxAnXdsl2LnStatusOperState OBJECT-TYPE
SYNTAX INTEGER
{
idle(1),
handshake(2),
training(3),
testing(4), -- such as DELT,HYBRID,TX test.
showtime(5),
waiting(6) -- waiting for trainng.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the line."
::= { zxAnXdsl2LnEntry 58 }
zxAnXdsl2LnStatusActDataPathType OBJECT-TYPE
SYNTAX INTEGER {
atm(1),
ptm(2),
stm(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual data path type of this line."
::= { zxAnXdsl2LnEntry 59 }
zxAnXdsl2LnStatusDataPathType OBJECT-TYPE
SYNTAX INTEGER {
atm(1),
ptm(2),
stm(3),
auto(4) -- negotiate automatically
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Data path type of this line."
::= { zxAnXdsl2LnEntry 60 }
zxAnXdsl2LnStatusBitswapDs OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabled or disabled the Bitswap of downstream."
::= { zxAnXdsl2LnEntry 61 }
zxAnXdsl2LnStatusBitswapUs OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabled or disabled the Bitswap of upstream."
::= { zxAnXdsl2LnEntry 62 }
zxAnXdsl2LnStatusHighRateLimit OBJECT-TYPE
SYNTAX INTEGER {
noLimit (1),
limited (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabled or disabled the high rate limitation."
::= { zxAnXdsl2LnEntry 63 }
zxAnXdsl2LnExtConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line Dpbo Profile Table, (zxAnXdsl2LnExtConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
DEFVAL { "VDEFVAL" }
::= { zxAnXdsl2LnEntry 64 }
zxAnXdsl2LnStatusPrevAttainRateDs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate attainable by
the xTU-C transmitter and the xTU-R receiver last time,
coded in kbit/s."
::= { zxAnXdsl2LnEntry 65 }
zxAnXdsl2LnStatusPrevAttainRateUs OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate attainable by the
xTU-R transmitter and the xTU-C receiver last time,
coded in kbit/s."
::= { zxAnXdsl2LnEntry 66 }
zxAnXdsl2LnCmndPMReset OBJECT-TYPE
SYNTAX BITS {
currentPerf(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the performance monitoring results of single line.
currentPerf(0) - reset the current performance monitoring results.
it will affect only current real-time PM object,
such as zxAnXdsl2PMChCurrTransmittedBlks,
zxAnXdsl2PMChCurrOverflowBlks and
zxAnXdsl2PMChCurrErroredBlks.
The PM result of history will not be reset,
and the current PM result of 15 minutes and 1 day
will be unaffected too.
"
::= { zxAnXdsl2LnEntry 67 }
zxAnXdsl2LnCustomizedCapability OBJECT-TYPE
SYNTAX BITS
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specific functions reserved by ZTE."
::= { zxAnXdsl2LnEntry 80 }
zxAnXdsl2LnInpEtrDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expected throughput (ETR)."
::= { zxAnXdsl2LnEntry 81 }
zxAnXdsl2LnInpEtrUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expected throughput (ETR)."
::= { zxAnXdsl2LnEntry 82 }
zxAnXdsl2LnInpEftrDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error-free throughput (EFTR is defined as the average
bit-rate at the alpha1/beta1 reference point, of bits originating
from DTU's which have been detected to contain no error at the
moment of crossing the alpha1/beta1 reference point."
::= { zxAnXdsl2LnEntry 83 }
zxAnXdsl2LnInpEftrUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error-free throughput (EFTR is defined as the average
bit-rate at the alpha1/beta1 reference point, of bits
originating from DTU's which have been detected to contain
no error at the moment of crossing the alpha1/beta1 reference
point."
::= { zxAnXdsl2LnEntry 84 }
zxAnXdsl2LnInpMinEftrDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum error-free throughput (EFTR_min is defined as the
minimum of the EFTR observed since the last reading of the
EFTR_min."
::= { zxAnXdsl2LnEntry 85 }
zxAnXdsl2LnInpMinEftrUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum error-free throughput (EFTR_min is defined as the
minimum of the EFTR observed since the last reading of the
EFTR_min."
::= { zxAnXdsl2LnEntry 86 }
zxAnXdsl2LnInpActDelayDs OBJECT-TYPE
SYNTAX INTEGER(0..63)
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If retransmission is used in a given transmit direction, this
Object is defined as the actual value of the time-independent
component of the delay between the alfa1 and beta1 reference
points.
This can be calculated as the minimum possible instantaneous
delay between the alfa1 and beta1 reference points, based on
the actual settings of the framing parameters."
::= { zxAnXdsl2LnEntry 87 }
zxAnXdsl2LnInpActDelayUs OBJECT-TYPE
SYNTAX INTEGER(0..63)
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If retransmission is used in a given transmit direction, this
Object is defined as the actual value of the time-independent
component of the delay between the alfa1 and beta1 reference
points.
This can be calculated as the minimum possible instantaneous
delay between the alfa1 and beta1 reference points, based on
the actual settings of the framing parameters."
::= { zxAnXdsl2LnEntry 88 }
zxAnXdsl2LnFextCancellationDs OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable downstream FEXT cancellation.
This configuration parameter shall be defined for each line in a
group of vectored lines. It enables or disables FEXT cancellation
from all the other vectored lines into a line in the vectored
group. If FEXT cancellation is disabled for a line, then no FEXT
cancellation shall occur from any other line in the vectored group
into that line."
REFERENCE "ITU-T G.993.5, paragraph #11.1.1"
DEFVAL { enabled }
::= { zxAnXdsl2LnEntry 89 }
zxAnXdsl2LnFextCancellationUs OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable upstream FEXT cancellation.
This configuration parameter shall be defined for each line in a
group of vectored lines. It enables or disables FEXT cancellation
from all the other vectored lines into a line in the vectored
group. If FEXT cancellation is disabled for a line, then no FEXT
cancellation shall occur from any other line in the vectored group
into that line."
REFERENCE "ITU-T G.993.5, paragraph #11.1.1"
DEFVAL { enabled }
::= { zxAnXdsl2LnEntry 90 }
zxAnXdsl2LnSosConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line SOS Profile Table, (zxAnXdsl2SosConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "Broadband Forum TR-252, paragraph #5.4"
DEFVAL { "VSOSDEFVAL" }
::= { zxAnXdsl2LnEntry 91 }
zxAnXdsl2LnStatusLnAttenDs OBJECT-TYPE
SYNTAX Integer32(0..1270)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream line Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
of that band during initialization.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all sub-carriers
of that band during initialization.
Values range from 0 to 1270 in units of 0.1 dB (Physical values
are 0 to 127 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
and paragraph #7.5.1.10 (LATNus)6"
::= { zxAnXdsl2LnEntry 92 }
zxAnXdsl2LnStatusLnAttenUs OBJECT-TYPE
SYNTAX Integer32(0..1270)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream line Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
of that band during initialization.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all sub-carriers
of that band during initialization.
Values range from 0 to 1270 in units of 0.1 dB (Physical values
are 0 to 127 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
and paragraph #7.5.1.10 (LATNus)6"
::= { zxAnXdsl2LnEntry 93 }
zxAnXdsl2LnStatusSigAttenDs OBJECT-TYPE
SYNTAX Integer32(0..1270)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream signal Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
of that band during Showtime.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all sub-carriers
of that band during Showtime.
Values range from 0 to 1270 in units of 0.1 dB (Physical values
are 0 to 127 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
and paragraph #7.5.1.12 (SATNus)"
::= { zxAnXdsl2LnEntry 94 }
zxAnXdsl2LnStatusSigAttenUs OBJECT-TYPE
SYNTAX Integer32(0..1270)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream signal Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
of that band during Showtime.
When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R
and the total power received by the xTU-C over all sub-carriers
of that band during Showtime.
Values range from 0 to 1270 in units of 0.1 dB (Physical values
are 0 to 127 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
and paragraph #7.5.1.12 (SATNus)"
::= { zxAnXdsl2LnEntry 95 }
zxAnXdsl2LnStatusSnrMarginDs OBJECT-TYPE
SYNTAX Integer32(-640..630)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that
the BER requirements are met for all bearer channels received
at the XTU. Values range from -640 to 630 in units of 0.1 dB
(Physical values are -64 to 63 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
and paragraph #7.5.1.14 (SNRMpbds)
and paragraph #7.5.1.16 (SNRMus)
and paragraph #7.5.1.17 (SNRMpbus)"
::= { zxAnXdsl2LnEntry 96 }
zxAnXdsl2LnStatusSnrMarginUs OBJECT-TYPE
SYNTAX Integer32(-640..630)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that
the BER requirements are met for all bearer channels received
at the XTU. Values range from -640 to 630 in units of 0.1 dB
(Physical values are -64 to 63 dB)."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
and paragraph #7.5.1.14 (SNRMpbds)
and paragraph #7.5.1.16 (SNRMus)
and paragraph #7.5.1.17 (SNRMpbus)"
::= { zxAnXdsl2LnEntry 97 }
zxAnXdsl2LnInmConfPrf OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the row in the xDSL2
Line INM Profile Table, (zxAnXdsl2InmConfPrfTable),
which applies for this line.
This object MUST be maintained in a persistent manner."
REFERENCE "Broadband Forum TR-252, paragraph #5.4"
DEFVAL { "VINMDEFVAL" }
::= { zxAnXdsl2LnEntry 98 }
zxAnXdsl2LnLofStatsDs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream count of times that there was LOF."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LnEntry 99 }
zxAnXdsl2LnLofStatsUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream count of times that there was LOF."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LnEntry 100 }
zxAnXdsl2LnLolStatsDs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream count of times that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LnEntry 101 }
zxAnXdsl2LnLolStatsUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream count of times that there was LOF."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LnEntry 102 }
zxAnXdsl2LnLprStatsDs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream count of times that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LnEntry 103 }
zxAnXdsl2LnLprStatsUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream count of times that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2LnEntry 104 }
zxAnXdsl2LnActInpShineDs OBJECT-TYPE
SYNTAX Integer32
UNITS "DMT Symbol"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The test parameter INP_act_SHINE is defined as the actual INP
against SHINE of the latency path with retransmission under
following specific conditions:
Assuming impulse noise protection against REIN equal to INPmin_rein
Assuming EFTR>=ETR
It shall be calculated by the transmitter during initialization
and updated upon OLR.
The test parameter INP_act_SHINE shall be represented as a 16-bit
unsigned integer expressing the value in fractions of DMT symbols
witch a granularity of 0.1 symbols.
The valid range is from 0 to 204.6. The special value 204.7
indicates a value of 204.7 or higher."
REFERENCE "ITU-T G.998.4, paragraph #11.2.3"
::= { zxAnXdsl2LnEntry 105 }
zxAnXdsl2LnActInpShineUs OBJECT-TYPE
SYNTAX Integer32
UNITS "DMT Symbol"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The test parameter INP_act_SHINE is defined as the actual INP
against SHINE of the latency path with retransmission under
following specific conditions:
Assuming impulse noise protection against REIN equal to INPmin_rein
Assuming EFTR>=ETR
It shall be calculated by the transmitter during initialization
and updated upon OLR.
The test parameter INP_act_SHINE shall be represented as a 16-bit
unsigned integer expressing the value in fractions of DMT symbols
witch a granularity of 0.1 symbols.
The valid range is from 0 to 204.6. The special value 204.7
indicates a value of 204.7 or higher."
REFERENCE "ITU-T G.998.4, paragraph #11.2.3"
::= { zxAnXdsl2LnEntry 106 }
zxAnXdsl2LnActInpReinDs OBJECT-TYPE
SYNTAX Integer32
UNITS "DMT Symbol"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The test parameter INP_act_REIN is defined as the minimum of
1) the actual INP against REIN of the latency path with
retransmission under the following specific conditions:
Assuming impulse noise protection against REIN equal to INPmin_rein
Assuming EFTR>=ETR
2) the actual INP in the latency path carrying the overhead
channel.
It shall be calculated by the transmitter during initialization
and updated upon OLR.
The test parameter INP_act_REIN shall be represented as a 8 bit
unsigned integer expressing the value in fractions of DMT symbols
witch a granularity of 0.1 symbols.
The valid range is from 0 to 25.4. The special value 25.5
indicates a value of 25.5 or higher."
REFERENCE "ITU-T G.998.4, paragraph #11.2.4"
::= { zxAnXdsl2LnEntry 107 }
zxAnXdsl2LnActInpReinUs OBJECT-TYPE
SYNTAX Integer32
UNITS "DMT Symbol"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The test parameter INP_act_REIN is defined as the minimum of
1) the actual INP against REIN of the latency path with
retransmission under the following specific conditions:
Assuming impulse noise protection against REIN equal to INPmin_rein
Assuming EFTR>=ETR
2) the actual INP in the latency path carrying the overhead
channel.
It shall be calculated by the transmitter during initialization
and updated upon OLR.
The test parameter INP_act_REIN shall be represented as a 8 bit
unsigned integer expressing the value in fractions of DMT symbols
witch a granularity of 0.1 symbols.
The valid range is from 0 to 25.4. The special value 25.5
indicates a value of 25.5 or higher."
REFERENCE "ITU-T G.998.4, paragraph #11.2.4"
::= { zxAnXdsl2LnEntry 108 }
zxAnXdsl2LnStatusActRaModeDs OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
atInit(2),
dynamic(3),
dynamicWithSos(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates the actual active RA-MODE in the
downstream direction.
If ACT-RA-MODEds equals 1, the link is operating in RA-MODE 1
(MANUAL).
If ACT-RA-MODEds equals 2, the link is operating in RA-MODE 2
(AT_INIT).
If ACT-RA-MODEds equals 3, the link is operating in RA-MODE 3
(DYNAMIC).
NOTE 1 - In [ITU-T G.992.3] ACT-RA-MODEds=3 corresponds to SRA
supported. In [ITU-T G.993.2] ACT-RA-MODEds=3 corresponds to
SRA supported by both XTUs in the downstream direction, but SOS
not supported by both XTUs in the downstream direction. If
ACT-RA-MODEds equals 4, the link is operating in RA-MODE 4
(DYNAMIC with SOS).
NOTE 2 - In [ITU-T G.992.3] ACT-RA-MODEds=4 is not defined.
In [ITU-T G.993.2] ACT-RA-MODEds=4 corresponds to SOS and SRA
supported by both XTUs in the downstream direction."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.33.1"
::= { zxAnXdsl2LnEntry 109 }
zxAnXdsl2LnStatusActRaModeUs OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
atInit(2),
dynamic(3),
dynamicWithSos(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates the actual active RA-MODE in the upstream
direction.
If ACT-RA-MODEus equals 1, the link is operating in RA-MODE 1
(MANUAL).
If ACT-RA-MODEus equals 2, the link is operating in RA-MODE 2
(AT_INIT).
If ACT-RA-MODEus equals 3, the link is operating in RA-MODE 3
(DYNAMIC).
NOTE 1 - In [ITU-T G.992.3] ACT-RA-MODEus=3 corresponds to SRA
supported. In [ITU-T G.993.2] ACT-RA-MODEus=3 corresponds to SRA
supported by both XTUs in the upstream direction, but SOS not
supported by both XTUs in the upstream direction. If ACT-RA-MODEus
equals 4, the link is operating in RA-MODE 4 (DYNAMIC with SOS).
NOTE 2 - In [ITU-T G.992.3] ACT-RA-MODEus=4 is not defined.
In [ITU-T G.993.2] ACT-RA-MODEus=4 corresponds to SOS and SRA
supported by both XTUs in the upstream direction."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.33.2"
::= { zxAnXdsl2LnEntry 110 }
zxAnXdsl2LnStatusRtxUsedDs OBJECT-TYPE
SYNTAX INTEGER
{
used(1),
forbidden(2),
xtucUnsupported(3),
xturUnsupported(4),
xtucAndXturUnsupported(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter specifies whether ITU-T G.998.4 retransmission
is used (i.e., active in showtime) in a given transmit direction.
The parameter in downstream is RTX_USED_ds, and the parameter in
upstream is RTX_USED_us. In [ITU-T G.992.3] and [ITU-T G.992.5]
only the downstream parameter RTX_USED_ds is relevant, the value
in the upstream direction shall be ignored. In [ITU-T G.993.2],
both parameters are relevant.
1: RTX in use.
2: RTX not in use, due to RTX_MODE = FORBIDDEN.
3: RTX not in use, due to not supported by the XTU-C.
4: RTX not in use, due to not supported by the XTU-R.
5: RTX not in use, due to not supported by the XTU-C and XTU-R.
This parameter shall also be reported in the case of
RTX_MODE = RTX_FORCED with INIT FAILURE or with
RTX_MODE = RTX_TESTMODE with INIT FAILURE.
NOTE - In the latter case, this parameter will give detailed
information on top of the INIT FAILURE reason code."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.38"
::= { zxAnXdsl2LnEntry 111}
zxAnXdsl2LnStatusRtxUsedUs OBJECT-TYPE
SYNTAX INTEGER
{
used(1),
forbidden(2),
xtucUnsuppoted(3),
xturUnsuppoted(4),
xtucAndXturUnsuppoted(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter specifies whether ITU-T G.998.4 retransmission
is used (i.e., active in showtime) in a given transmit direction.
The parameter in downstream is RTX_USED_ds, and the parameter in
upstream is RTX_USED_us. In [ITU-T G.992.3] and [ITU-T G.992.5]
only the downstream parameter RTX_USED_ds is relevant, the value
in the upstream direction shall be ignored. In [ITU-T G.993.2],
both parameters are relevant.
1: RTX in use.
2: RTX not in use, due to RTX_MODE = FORBIDDEN.
3: RTX not in use, due to not supported by the XTU-C.
4: RTX not in use, due to not supported by the XTU-R.
5: RTX not in use, due to not supported by the XTU-C and XTU-R.
This parameter shall also be reported in the case of
RTX_MODE = RTX_FORCED with INIT FAILURE or with
RTX_MODE = RTX_TESTMODE with INIT FAILURE.
NOTE - In the latter case, this parameter will give detailed
information on top of the INIT FAILURE reason code."
REFERENCE
"ITU-T G.997.1, paragraph #7.5.1.38"
::= { zxAnXdsl2LnEntry 112}
--------------------------------------------------------------------------
-- zxAnXdsl2LnBandTable
--------------------------------------------------------------------------
zxAnXdsl2LnBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2LnBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2LnBandTable contains the,
per-band line status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.
The indexes of this table consist of an interface index where the
interface has an ifType of vdsl2(xxx), together with a
per-band index covering both VDSL2 and ADSL/ADSL2/ADSL2+.
The parameters in this table are updated at
line initialisation time and at showtime."
::= { zxAnXdsl2Line 11 }
zxAnXdsl2LnBandEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2LnBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2LnBandTable contains the,
per-band line status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line."
AUGMENTS { xdsl2LineBandEntry }
::= { zxAnXdsl2LnBandTable 1 }
ZxAnXdsl2LnBandEntry ::=
SEQUENCE {
zxAnXdsl2LineBandStatusPrevSnrMargin Integer32
}
zxAnXdsl2LineBandStatusPrevSnrMargin OBJECT-TYPE
SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Last SNR Margin.
SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that
the BER requirements are met for all bearer channels received
at the XTU. Values range from -640 to 630 in units of 0.1 dB
(Physical values are -64 to 63 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
and paragraph #7.5.1.14 (SNRMpbds)
and paragraph #7.5.1.16 (SNRMus)
and paragraph #7.5.1.17 (SNRMpbus)"
DEFVAL { 2147483646 }
::= { zxAnXdsl2LnBandEntry 1 }
--------------------------------------------------------------------------
-- zxAnXdsl2DsDataRateConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2DsDataRateConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2DsDataRateConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DsDataRate Profile contains the downstream parameters related to the service
offer of all bearers.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 10 }
zxAnXdsl2DsDataRateConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2DsDataRateConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2DsDataRateConfPrfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.
A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2DsDataRateConfPrfName }
::= { zxAnXdsl2DsDataRateConfPrfTable 1 }
ZxAnXdsl2DsDataRateConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2DsDataRateConfPrfName DisplayString,
zxAnXdsl2ChConfChannRaRatioDs Unsigned32,
zxAnXdsl2ChConfMinDataRateDs Unsigned32,
zxAnXdsl2ChConfMaxDataRateDs Unsigned32,
zxAnXdsl2ChConfMinResRateDs Unsigned32,
zxAnXdsl2ChConfMinRateLowPwrDs Unsigned32,
zxAnXdsl2ChConfMaxBerDs Xdsl2MaxBer,
zxAnXdsl2ChConfDsDataRateDs Unsigned32,
zxAnXdsl2ChConfUsDataRateDs Unsigned32,
zxAnXdsl2ChConfMinSosBitRateDs Unsigned32,
zxAnXdsl2DsDataRatePrfRowStatus RowStatus
}
zxAnXdsl2DsDataRateConfPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2DsDataRateConfPrfEntry 1 }
zxAnXdsl2ChConfChannRaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percents"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels. Also, the 100 -
Xdsl2ConfTemplateChan1RaRatioDs is the ratio of excess data
rate to be assigned to all other bearer channels on Downstream
direction. The sum of rate adaptation ratios over all bearers
on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
DEFVAL { 100 }
::= { zxAnXdsl2DsDataRateConfPrfEntry 2 }
zxAnXdsl2ChConfMinDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
DEFVAL { 32 }
::= { zxAnXdsl2DsDataRateConfPrfEntry 3 }
zxAnXdsl2ChConfMaxDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2DsDataRateConfPrfEntry 4 }
zxAnXdsl2ChConfMinResRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e.,
Xdsl2LineConfRaModeDs) is set to DynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2DsDataRateConfPrfEntry 5 }
zxAnXdsl2ChConfMinRateLowPwrDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2DsDataRateConfPrfEntry 6 }
zxAnXdsl2ChConfMaxBerDs OBJECT-TYPE
SYNTAX Xdsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Downstream direction. The
maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)"
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.6"
DEFVAL { eminus7 }
::= { zxAnXdsl2DsDataRateConfPrfEntry 7 }
zxAnXdsl2ChConfDsDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000)
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data Rate Threshold Downshift for downstream direction. A
'Down-shift rate change' event is triggered when the
actual
downstream data rate is below the data rate at the last entry
into Showtime, by more than the threshold. The parameter is
coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.1"
::= { zxAnXdsl2DsDataRateConfPrfEntry 8 }
zxAnXdsl2ChConfUsDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000)
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data Rate Threshold Up shift for downstream direction. An
'Up-shift rate change' event is triggered when the
actual
downstream data rate exceeds, by more than the threshold, the
data rate at the last entry into Showtime. The parameter is
coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.1"
::= { zxAnXdsl2DsDataRateConfPrfEntry 9 }
zxAnXdsl2ChConfMinSosBitRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter specifies the minimum net data rate required for a
valid SOS request in the downstream direction.
The value shall be coded as an unsigned integer representing the
data rate as a multiple of 8 kbit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.6"
::= { zxAnXdsl2DsDataRateConfPrfEntry 10 }
zxAnXdsl2DsDataRatePrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2DsDataRateConfPrfEntry 80 }
--------------------------------------------------------------------------
-- zxAnXdsl2UsDataRateConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2UsDataRateConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2UsDataRateConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The UsDataRate Profile contains the upstream parameters related to the service
offer of all bearers.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 11 }
zxAnXdsl2UsDataRateConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2UsDataRateConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2UsDataRateConfPrfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.
A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2UsDataRateConfPrfName }
::= { zxAnXdsl2UsDataRateConfPrfTable 1 }
ZxAnXdsl2UsDataRateConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2UsDataRateConfPrfName DisplayString,
zxAnXdsl2ChConfChannRaRatioUs Unsigned32,
zxAnXdsl2ChConfMinDataRateUs Unsigned32,
zxAnXdsl2ChConfMaxDataRateUs Unsigned32,
zxAnXdsl2ChConfMinResRateUs Unsigned32,
zxAnXdsl2ChConfMinRateLowPwrUs Unsigned32,
zxAnXdsl2ChConfMaxBerUs Xdsl2MaxBer,
zxAnXdsl2ChConfDsDataRateUs Unsigned32,
zxAnXdsl2ChConfUsDataRateUs Unsigned32,
zxAnXdsl2ChConfMinSosBitRateUs Unsigned32,
zxAnXdsl2UsDataRatePrfRowStatus RowStatus
}
zxAnXdsl2UsDataRateConfPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2UsDataRateConfPrfEntry 1 }
zxAnXdsl2ChConfChannRaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100)
UNITS "percents"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all
bearer channels. Also, the
100 - Xdsl2ConfTemplateChan1RaRatioUs is the ratio of excess
data rate to be assigned to all other bearer channels on
Upstream direction. The sum of rate adaptation ratios over
all bearers on the same direction shall be equal to 100 %."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
DEFVAL { 100 }
::= { zxAnXdsl2UsDataRateConfPrfEntry 2 }
zxAnXdsl2ChConfMinDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate on Upstream direction. The minimum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
DEFVAL { 32 }
::= { zxAnXdsl2UsDataRateConfPrfEntry 3 }
zxAnXdsl2ChConfMaxDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Data Rate on Upstream direction. The maximum net
data rate for the bearer channel, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1"
::= { zxAnXdsl2UsDataRateConfPrfEntry 4 }
zxAnXdsl2ChConfMinResRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e.,
Xdsl2LineConfRaModeUs) is set to DynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2UsDataRateConfPrfEntry 5 }
zxAnXdsl2ChConfMinRateLowPwrUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate in Low Power state on upstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { zxAnXdsl2UsDataRateConfPrfEntry 6 }
zxAnXdsl2ChConfMaxBerUs OBJECT-TYPE
SYNTAX Xdsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)"
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.6"
DEFVAL { eminus7 }
::= { zxAnXdsl2UsDataRateConfPrfEntry 7 }
zxAnXdsl2ChConfDsDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000)
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data Rate Threshold Downshift for upstream direction. A
'Down-shift rate change' event is triggered when the
actual
upstream data rate is below the data rate at the last entry
into Showtime, by more than the threshold. The parameter is
coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.1"
::= { zxAnXdsl2UsDataRateConfPrfEntry 8 }
zxAnXdsl2ChConfUsDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000)
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Data Rate Threshold Up shift for upstream direction. An
'Up-shift rate change' event is triggered when the
actual
upstream data rate exceeds, by more than the threshold, the
data rate at the last entry into Showtime. The parameter is
coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.8.1"
::= { zxAnXdsl2UsDataRateConfPrfEntry 9 }
zxAnXdsl2ChConfMinSosBitRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter specifies the minimum net data rate required for a
valid SOS request in the upstream direction.
The value shall be coded as an unsigned integer representing the
data rate as a multiple of 8 kbit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.7"
::= { zxAnXdsl2UsDataRateConfPrfEntry 10 }
zxAnXdsl2UsDataRatePrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2UsDataRateConfPrfEntry 80 }
--------------------------------------------------------------------------
-- zxAnXdsl2SpectrumConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2SpectrumConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2SpectrumConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Line Spectrum Profile contains the parameters that identify the
basic characteristics of the spectrum used on the line
(xDSL mode, PSD, aggregate power).
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 12 }
zxAnXdsl2SpectrumConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2SpectrumConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2SpectrumConfPrfName }
::= { zxAnXdsl2SpectrumConfPrfTable 1 }
ZxAnXdsl2SpectrumConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2SpectrumConfPrfName DisplayString,
zxAnXdsl2LConfXtuTransSysEna ZxAnXdsl2TransmissionModeType,
zxAnXdsl2LConfScMaskDs Xdsl2ScMaskDs,
zxAnXdsl2LConfScMaskUs Xdsl2ScMaskUs,
zxAnXdsl2LConfVdsl2CarMask Xdsl2CarMask,
zxAnXdsl2LConfMsgMinDs Unsigned32,
zxAnXdsl2LConfMsgMinUs Unsigned32,
zxAnXdsl2LConfCeFlag Xdsl2LineCeFlag,
zxAnXdsl2LConfPmMode Xdsl2LinePmMode,
zxAnXdsl2LConfL0Time Unsigned32,
zxAnXdsl2LConfL2Time Unsigned32,
zxAnXdsl2LConfL2Atpr Unsigned32,
zxAnXdsl2LConfL2Atprt Unsigned32,
zxAnXdsl2LConfProfiles Xdsl2LineProfiles,
zxAnXdsl2LConfUs0Mask Xdsl2LineUs0Mask,
zxAnXdsl2SpectrumPrfRowStatus RowStatus
}
zxAnXdsl2SpectrumConfPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2SpectrumConfPrfEntry 1 }
zxAnXdsl2LConfXtuTransSysEna OBJECT-TYPE
SYNTAX ZxAnXdsl2TransmissionModeType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"xTU Transmission System Enabling (xTSE). A list of the
different coding types enabled in this profile. It is coded
in a bit-map representation with 1 or more bits set. A bit
set to '1' means that the xTUs may apply the respective
coding for the DSL line. A bit set to '0' means that
the xTUs cannot apply the respective coding for the ADSL
line. All 'reserved' bits should be set to '0'."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.1"
::= { zxAnXdsl2SpectrumConfPrfEntry 2 }
zxAnXdsl2LConfScMaskDs OBJECT-TYPE
SYNTAX Xdsl2ScMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sub-carriers mask. A bitmap of 4096 bits that allows
masking
up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCds) is set to '1', the
respective
downstream sub-carrier i is masked, and if set to '0',
the
respective sub-carrier is unmasked. Note that there should
always be unmasked sub-carriers (i.e., the object cannot be
all 1's). Also note that if NSCds < 4096, all bits
i (NSCds i <= 4096) should be set to '1'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.6"
::= { zxAnXdsl2SpectrumConfPrfEntry 3 }
zxAnXdsl2LConfScMaskUs OBJECT-TYPE
SYNTAX Xdsl2ScMaskUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sub-carriers mask. A bitmap of 4096 bits that allows
masking
up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCus) is set to '1', the
respective
upstream sub-carrier i is masked, and if set to '0',
the
respective sub-carrier is unmasked. Note that there
should always be unmasked sub-carriers (i.e., the object
cannot be all 1's). Also note that if NSCus <
4096, all bits i (NSCus < i <= 4096) should be set to
'1'."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.7"
::= { zxAnXdsl2SpectrumConfPrfEntry 4 }
zxAnXdsl2LConfVdsl2CarMask OBJECT-TYPE
SYNTAX Xdsl2CarMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(VDSL2-CARMASK).
VDSL2 specific Sub-carriers mask. This configuration
parameter defines the restrictions, additional to the band
plan, to determine the set of subcarriers allowed for
transmission in both upstream and downstream directions.
The parameter shall describe the not masked subcarriers as
one or more frequency bands. Each band is represented by
start and stop subcarrier indices with a subcarrier
spacing of 4.3125kHz. The valid range of subcarrier indices
run from 0 to at least the index of the highest allowed
subcarrier in both transmission directions among all
profiles enabled by the parameter zxAnXdsl2LConfPrfiles.
Up to 32 bands may be specified. Other subcarriers shall
be masked."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.8"
::= { zxAnXdsl2SpectrumConfPrfEntry 5 }
zxAnXdsl2LConfMsgMinDs OBJECT-TYPE
SYNTAX Unsigned32(4..248)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Overhead Rate Downstream. Defines the minimum rate
of
the message-based overhead that shall be maintained by the xTU
in downstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.2"
DEFVAL { 4 }
::= { zxAnXdsl2SpectrumConfPrfEntry 6 }
zxAnXdsl2LConfMsgMinUs OBJECT-TYPE
SYNTAX Unsigned32(4..248)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Overhead Rate Upstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU
in upstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.1"
DEFVAL { 4 }
::= { zxAnXdsl2SpectrumConfPrfEntry 7 }
zxAnXdsl2LConfCeFlag OBJECT-TYPE
SYNTAX Xdsl2LineCeFlag
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(CEFLAG).
This parameter is a bit that enables the use of the optional
cyclic extension values. If the bit is set to 1, the optional
cyclic extension values may be used. Otherwise, the cyclic
extension shall be forced to the mandatory length (5N/32)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.6.1"
DEFVAL { { } }
::= { zxAnXdsl2SpectrumConfPrfEntry 8 }
zxAnXdsl2LConfPmMode OBJECT-TYPE
SYNTAX Xdsl2LinePmMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Power management state Enabling (PMMode). Defines the power
states the xTU-C or xTU-R may autonomously transition to on
this line.
The various bit positions are: allowTransitionsToIdle (0) and
allowTransitionsToLowPower (1). A bit with a '1' value
means
that the xTU is allowed to transit into the respective state
and a '0' value means that the xTU is not allowed
to transit into the respective state."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.4"
DEFVAL { { } }
::= { zxAnXdsl2SpectrumConfPrfEntry 9 }
zxAnXdsl2LConfL0Time OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state (L0-TIME).
It ranges from 0 to 255 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.5"
DEFVAL { 255 }
::= { zxAnXdsl2SpectrumConfPrfEntry 10 }
zxAnXdsl2LConfL2Time OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum time (in seconds) between an Entry into the
L2 state and the first Power Trim in the L2 state and between
two consecutive Power Trims in the L2 State (L2-TIME).
It ranges from 0 to 255 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.6"
DEFVAL { 255 }
::= { zxAnXdsl2SpectrumConfPrfEntry 11 }
zxAnXdsl2LConfL2Atpr OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state (L2-ATPR).
It ranges from 0 dB to 31 dB."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.7"
DEFVAL { 3 }
::= { zxAnXdsl2SpectrumConfPrfEntry 12 }
zxAnXdsl2LConfL2Atprt OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The total maximum aggregate transmit power reduction
(in dB) that can be performed in an L2 state. This is the
sum of all reductions of L2 Request (i.e., at transition of
L0 to L2 state) and Power Trims (L2-ATPRT)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.9"
DEFVAL { 31 }
::= { zxAnXdsl2SpectrumConfPrfEntry 13 }
zxAnXdsl2LConfProfiles OBJECT-TYPE
SYNTAX Xdsl2LineProfiles
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The configuration parameter contains the G.993.2
profiles to be allowed by the near-end xTU on this line
(PROFILES).
It is coded in a bitmap representation (0 if not allowed,
1 if allowed) "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.11"
DEFVAL { { profile17a } }
::= { zxAnXdsl2SpectrumConfPrfEntry 14 }
zxAnXdsl2LConfUs0Mask OBJECT-TYPE
SYNTAX Xdsl2LineUs0Mask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of profiles which allows the transceivers to support
a subset of allowed settings, as defined in G.993.2 Recommendation."
::= { zxAnXdsl2SpectrumConfPrfEntry 15 }
zxAnXdsl2SpectrumPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2SpectrumConfPrfEntry 30 }
--------------------------------------------------------------------------
-- zxAnXdsl2DpboConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2DpboConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2DpboConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DPBO Profile contains all the parameters related to the
ownstream PBO shaping.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 13 }
zxAnXdsl2DpboConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2DpboConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2DpboConfPrfName }
::= { zxAnXdsl2DpboConfPrfTable 1 }
ZxAnXdsl2DpboConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2DpboConfPrfName DisplayString,
zxAnXdsl2LConfDpboEPsd Xdsl2PsdMaskDs,
zxAnXdsl2LConfDpboEsEL Unsigned32,
zxAnXdsl2LConfDpboEscmA Unsigned32,
zxAnXdsl2LConfDpboEscmB Unsigned32,
zxAnXdsl2LConfDpboEscmC Unsigned32,
zxAnXdsl2LConfDpboMus Unsigned32,
zxAnXdsl2LConfDpboFMin Unsigned32,
zxAnXdsl2LConfDpboFMax Unsigned32,
zxAnXdsl2DpboConfPrfRowStatus RowStatus
}
zxAnXdsl2DpboConfPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2DpboConfPrfEntry 1 }
zxAnXdsl2LConfDpboEPsd OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOEPSD).
This configuration parameter defines the PSD mask that
is assumed to be permitted at the exchange. This parameter
shall use the same format as zxAnXdsl2LConfPsdMaskDs (PSDMASKds).
The maximum number of breakpoints for zxAnXdsl2LConfDpboEPsd is
16."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
::= { zxAnXdsl2DpboConfPrfEntry 2 }
zxAnXdsl2LConfDpboEsEL OBJECT-TYPE
SYNTAX Unsigned32 (0..511)
UNITS "0.5 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESEL).
This configuration parameter defines the assumed
electrical length of cables (E-side cables) connecting
exchange based DSL services to a remote flexibility point
(cabinet), that hosts the xTU-C that is subject to
spectrally shaped downstream power back-off (DPBO)
depending on this length. The electrical length is
defined as the loss (in dB) of an equivalent length of
hypothetical cable at a reference frequency defined by
the network operator or in spectrum management regulations.
This parameter shall be coded as an unsigned integer
representing an electrical length from 0 dB (coded as 0)
to 255.5 dB (coded as 511) in steps of 0.5 dB. All values
in the range are valid. If this parameter is set to zero,
the DPBO shall be disabled."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 }
::= { zxAnXdsl2DpboConfPrfEntry 3 }
zxAnXdsl2LConfDpboEscmA OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESCMA).
The E-side Cable Model parameter A (DPBOESCMA) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value.
The cable model is in terms of three
scalars zxAnXdsl2LConfDpboEsCableModelA (DPBOESCMA),
zxAnXdsl2LConfDpboEsCableModelB(DPBOESCMB),
and zxAnXdsl2LConfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side
cables calculated from the zxAnXdsl2LConfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to
1.5 (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 263 }
::= { zxAnXdsl2DpboConfPrfEntry 4 }
zxAnXdsl2LConfDpboEscmB OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESCMB).
The E-side Cable Model parameter B (DPBOESCMB) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value.
The cable model is in terms of three
scalars zxAnXdsl2LConfDpboEsCableModelA (DPBOESCMA),
zxAnXdsl2LConfDpboEsCableModelB(DPBOESCMB),
and zxAnXdsl2LConfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side
cables calculated from the zxAnXdsl2LConfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to
1.5 (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 509 }
::= { zxAnXdsl2DpboConfPrfEntry 5 }
zxAnXdsl2LConfDpboEscmC OBJECT-TYPE
SYNTAX Unsigned32 (0..640)
UNITS "2^-8"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESCMC).
The E-side Cable Model parameter C (DPBOESCMC) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value.
The cable model is in terms of three
scalars zxAnXdsl2LConfDpboEsCableModelA (DPBOESCMA),
zxAnXdsl2LConfDpboEsCableModelB(DPBOESCMB),
and zxAnXdsl2LConfDpboEsCableModelC (DPBOESCMC),
that are used to estimate the frequency dependent loss of E-side
cables calculated from the zxAnXdsl2LConfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to
1.5 (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 261 }
::= { zxAnXdsl2DpboConfPrfEntry 6 }
zxAnXdsl2LConfDpboMus OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.5 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOMUS).
This configuration parameter defines the assumed Minimum Usable
receive PSD mask (in dBm/Hz) for exchange based services,
used to modify parameter zxAnXdsl2LConfDpboFMax (DPBOFMAX) defined
below [to determine the DPBO]. It shall be coded as an unsigned
integer representing a PSD mask level from 0 dBm/Hz (coded as 0)
to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dB. All values
in the range are valid.
NOTE - The PSD mask level is 3.5 dB above the signal PSD
level. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 190 }
::= { zxAnXdsl2DpboConfPrfEntry 7 }
zxAnXdsl2LConfDpboFMin OBJECT-TYPE
SYNTAX Unsigned32 (0..2048)
UNITS "4.3125 kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOFMIN).
This configuration parameter defines the minimum frequency
from which the DPBO shall be applied. It ranges from
0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps
of 4.3125 kHz. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 32 }
::= { zxAnXdsl2DpboConfPrfEntry 8 }
zxAnXdsl2LConfDpboFMax OBJECT-TYPE
SYNTAX Unsigned32 (32..6956)
UNITS "4.3125 kHz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOFMAX).
This configuration parameter defines the maximum frequency at
which DPBO may be applied. It ranges from 138 kHz (coded as 32)
to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.
This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 511 }
::= { zxAnXdsl2DpboConfPrfEntry 9 }
zxAnXdsl2DpboConfPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of Dpbo
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2DpboConfPrfEntry 30 }
--------------------------------------------------------------------------
-- zxAnXdsl2UpboConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2UpboConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2UpboConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The UPBO Profile contains all the parameters related to the
Upstream PBO shaping.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 14 }
zxAnXdsl2UpboConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2UpboConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2LUpboConfPrfName }
::= { zxAnXdsl2UpboConfPrfTable 1 }
ZxAnXdsl2UpboConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2LUpboConfPrfName DisplayString,
zxAnXdsl2LConfUpboKL Unsigned32,
zxAnXdsl2LConfUpboKLF Xdsl2UpboKLF,
zxAnXdsl2LConfUpboU1bandPsdA Unsigned32,
zxAnXdsl2LConfUpboU1bandPsdB Unsigned32,
zxAnXdsl2LConfUpboU2bandPsdA Unsigned32,
zxAnXdsl2LConfUpboU2bandPsdB Unsigned32,
zxAnXdsl2LConfUpboU3bandPsdA Unsigned32,
zxAnXdsl2LConfUpboU3bandPsdB Unsigned32,
zxAnXdsl2LConfUpboU4bandPsdA Unsigned32,
zxAnXdsl2LConfUpboU4bandPsdB Unsigned32,
zxAnXdsl2LConfUpboU1bandKLRef Unsigned32,
zxAnXdsl2LConfUpboU2bandKLRef Unsigned32,
zxAnXdsl2LConfUpboU3bandKLRef Unsigned32,
zxAnXdsl2LConfUpboU4bandKLRef Unsigned32,
zxAnXdsl2LUpboConfPrfRowStatus RowStatus
}
zxAnXdsl2LUpboConfPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2UpboConfPrfEntry 1 }
zxAnXdsl2LConfUpboKL OBJECT-TYPE
SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOKL).
This configuration parameter defines the electrical length
expressed in dB at 1MHz, kl0, configured by the CO-MIB.
The value ranges from 0 (coded as 0) to 128 dB (coded as 1280)
in steps of 0.1 dB. This parameter is relevant only if
zxAnXdsl2LConfUpboKLF is set to override(2), which indicates
that this parameter's value will override the VTUs'
determination of the electrical length. If zxAnXdsl2LConfUpboKLF
is set either to auto(1) or disableUpbo(3), then this parameter
will be ignored."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfPrfEntry 2 }
zxAnXdsl2LConfUpboKLF OBJECT-TYPE
SYNTAX Xdsl2UpboKLF
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the upstream power backoff force mode (UPBOKLF). "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { disableUpbo }
::= { zxAnXdsl2UpboConfPrfEntry 3 }
zxAnXdsl2LConfUpboU1bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 5650 }
::= { zxAnXdsl2UpboConfPrfEntry 4 }
zxAnXdsl2LConfUpboU1bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 1020 }
::= { zxAnXdsl2UpboConfPrfEntry 5 }
zxAnXdsl2LConfUpboU2bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 5650 }
::= { zxAnXdsl2UpboConfPrfEntry 6 }
zxAnXdsl2LConfUpboU2bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 615 }
::= { zxAnXdsl2UpboConfPrfEntry 7 }
zxAnXdsl2LConfUpboU3bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 5650 }
::= { zxAnXdsl2UpboConfPrfEntry 8 }
zxAnXdsl2LConfUpboU3bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 615 }
::= { zxAnXdsl2UpboConfPrfEntry 9 }
zxAnXdsl2LConfUpboU4bandPsdA OBJECT-TYPE
SYNTAX Unsigned32(4000..8095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 4000 }
::= { zxAnXdsl2UpboConfPrfEntry 10 }
zxAnXdsl2LConfUpboU4bandPsdB OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist of two parameters [a, b]. Parameter 'a'
(zxAnXdsl2LConfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and
parameter 'b' (zxAnXdsl2LConfUpboPsdB) ranges from 0 dBm/Hz
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed
in MHz shall be equal to '-a-b(SQRT(f))'. Setting
zxAnXdsl2LConfUpboPsdA to 4000 and zxAnXdsl2LConfUpboPsdB to 0 is
a special configuration to disable UPBO in the respective
upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfPrfEntry 11 }
zxAnXdsl2LConfUpboU1bandKLRef OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This parameter defines the UPBO reference electrical length used to
compute the upstream power back-off for each upstream band except US0,
for the optional Equalized FEXT UPBO method. The value ranges from
1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfPrfEntry 12 }
zxAnXdsl2LConfUpboU2bandKLRef OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This parameter defines the UPBO reference electrical length used to
compute the upstream power back-off for each upstream band except US0,
for the optional Equalized FEXT UPBO method. The value ranges from
1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfPrfEntry 13 }
zxAnXdsl2LConfUpboU3bandKLRef OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This parameter defines the UPBO reference electrical length used to
compute the upstream power back-off for each upstream band except US0,
for the optional Equalized FEXT UPBO method. The value ranges from
1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfPrfEntry 14 }
zxAnXdsl2LConfUpboU4bandKLRef OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This parameter defines the UPBO reference electrical length used to
compute the upstream power back-off for each upstream band except US0,
for the optional Equalized FEXT UPBO method. The value ranges from
1.8 to 63.5 dB in steps of 0.1 dB with special value 0.
The use of the special value 0 is described in 7.2.1.3.2/G.993.2.
"
DEFVAL { 0 }
::= { zxAnXdsl2UpboConfPrfEntry 15 }
zxAnXdsl2LUpboConfPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of Upbo
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
ports."
::= { zxAnXdsl2UpboConfPrfEntry 30 }
--------------------------------------------------------------------------
-- zxAnXdsl2SnrMarginConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2SnrMarginConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2SnrMarginConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Noise Margin Profile contains all the noise margin parameters
to be defined for the line.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 15 }
zxAnXdsl2SnrMarginConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2SnrMarginConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2SnrMarginConfPrfName }
::= { zxAnXdsl2SnrMarginConfPrfTable 1 }
ZxAnXdsl2SnrMarginConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2SnrMarginConfPrfName DisplayString,
zxAnXdsl2LConfTargetSnrmDs Unsigned32,
zxAnXdsl2LConfTargetSnrmUs Unsigned32,
zxAnXdsl2LConfMaxSnrmDs Unsigned32,
zxAnXdsl2LConfMaxSnrmUs Unsigned32,
zxAnXdsl2LConfMinSnrmDs Unsigned32,
zxAnXdsl2LConfMinSnrmUs Unsigned32,
zxAnXdsl2LConfRaUsNrmDs Unsigned32,
zxAnXdsl2LConfRaUsNrmUs Unsigned32,
zxAnXdsl2LConfRaUsTimeDs Unsigned32,
zxAnXdsl2LConfRaUsTimeUs Unsigned32,
zxAnXdsl2LConfRaDsNrmDs Unsigned32,
zxAnXdsl2LConfRaDsNrmUs Unsigned32,
zxAnXdsl2LConfRaDsTimeDs Unsigned32,
zxAnXdsl2LConfRaDsTimeUs Unsigned32,
zxAnXdsl2LConfSnrModeDs Xdsl2LineSnrMode,
zxAnXdsl2LConfSnrModeUs Xdsl2LineSnrMode,
zxAnXdsl2LConfRaModeDs Xdsl2RaMode,
zxAnXdsl2LConfRaModeUs Xdsl2RaMode,
zxAnXdsl2SnrMarginConfRowStatus RowStatus
}
zxAnXdsl2SnrMarginConfPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2SnrMarginConfPrfEntry 1 }
zxAnXdsl2LConfTargetSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB
(Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.1"
DEFVAL { 60 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 2 }
zxAnXdsl2LConfTargetSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the upstream
bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB
(Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.2"
DEFVAL { 60 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 3 }
zxAnXdsl2LConfMaxSnrmDs OBJECT-TYPE
SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum Noise Margin the xTU-R receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-R
shall request that the xTU-C reduce the xTU-C transmit power
to get a noise margin below this limit (if this functionality
is supported). The maximum noise margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB). A value of
0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.3"
DEFVAL { 300 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 4 }
zxAnXdsl2LConfMaxSnrmUs OBJECT-TYPE
SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum Noise Margin the xTU-C receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-C
shall request that the xTU-R reduce the xTU-R transmit power
to get a noise margin below this limit (if this functionality
is supported). The maximum noise margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB). A value of
0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.4"
DEFVAL { 300 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 5 }
zxAnXdsl2LConfMinSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power.
If an increase to xTU-C transmit power is not possible, a
loss-of-margin (LOM) defect occurs, the xTU-R shall fail and
attempt to reinitialize and the NMS shall be notified. The
minimum noise margin ranges from 0 to 310 units of
0.1 dB (Physical values are 0 to 31 dB). A value of 0 means
that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.5"
DEFVAL { 0 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 6 }
zxAnXdsl2LConfMinSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power.
If an increase of xTU-R transmit power is not possible, a
loss-of-margin (LOM) defect occurs, the xTU-C shall fail and
attempt to re-initialize and the NMS shall be notified. The
minimum noise margin ranges from 0 to 310 units of
0.1 dB (Physical values are 0 to 31 dB). A value of 0 means
that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.6"
DEFVAL { 0 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 7 }
zxAnXdsl2LConfRaUsNrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Up-Shift Noise Margin value, to be used when
zxAnXdsl2LConfRaModeDs is set to dynamicRa. If the downstream
noise margin is above this value and stays above it for
more than the time specified by the zxAnXdsl2LConfRaUsTimeDs,
the xTU-R shall attempt to increase the downstream net data
rate. The Downstream Up-shift Noise Margin ranges from 0 to
310 units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.3"
DEFVAL { 90 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 8 }
zxAnXdsl2LConfRaUsNrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Up-Shift Noise Margin value, to be used when
zxAnXdsl2LConfRaModeUs is set to dynamicRa. If the upstream
noise margin is above this value and stays above it for more
than the time specified by the zxAnXdsl2LConfRaUsTimeUs, the
xTU-C shall attempt to increase the upstream net data rate.
The Upstream Up-shift Noise Margin ranges from 0 to 310 units
of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.4"
DEFVAL { 90 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 9 }
zxAnXdsl2LConfRaUsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Up-Shift Time Interval, to be used when
zxAnXdsl2LConfRaModeDs is set to dynamicRa. The interval of
time that the downstream noise margin should stay above the
Downstream Up-shift Noise Margin before the xTU-R shall
attempt to increase the downstream net data rate. The time
interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.5"
DEFVAL { 60 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 10 }
zxAnXdsl2LConfRaUsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Up-Shift Time Interval, to be used when
zxAnXdsl2LConfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay above the
Upstream Up-shift Noise Margin before the xTU-C shall
attempt to increase the upstream net data rate. The time
interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.6"
DEFVAL { 60 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 11 }
zxAnXdsl2LConfRaDsNrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Down-Shift Noise Margin value, to be used
when
zxAnXdsl2LConfRaModeDs is set to dynamicRa. If the downstream
noise margin is below this value and stays below that for more
than the time specified by the zxAnXdsl2LConfRaDsTimeDs, the
xTU-R shall attempt to decrease the downstream net data rate.
The Downstream Down-shift Noise Margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.7"
DEFVAL { 30 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 12 }
zxAnXdsl2LConfRaDsNrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Downshift Noise Margin value, to be used when
zxAnXdsl2LConfRaModeUs is set to dynamicRa. If the upstream
noise margin is below this value and stays below that for more
than the time specified by the zxAnXdsl2LConfRaDsTimeUs, the
xTU-C shall attempt to decrease the upstream net data rate.
The Upstream Down-shift Noise Margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.8"
DEFVAL { 30 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 13 }
zxAnXdsl2LConfRaDsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Downstream Downshift Time Interval, to be used when
zxAnXdsl2LConfRaModeDs is set to dynamicRa. The interval of
time the downstream noise margin should stay below the
Downstream Down-shift Noise Margin before the xTU-R shall
attempt to decrease the downstream net data rate. The time
interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.9"
DEFVAL { 60 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 14 }
zxAnXdsl2LConfRaDsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Upstream Down-Shift Time Interval, to be used when
zxAnXdsl2LConfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay below the Upstream
Down-shift Noise Margin before the xTU-C shall attempt to
decrease the upstream net data rate. The time interval ranges
from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.4.10"
DEFVAL { 60 }
::= { zxAnXdsl2SnrMarginConfPrfEntry 15 }
zxAnXdsl2LConfSnrModeDs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter enables/disables the transmitter referred virtual
noise in the downstream direction."
DEFVAL { virtualNoiseDisabled }
::= { zxAnXdsl2SnrMarginConfPrfEntry 16 }
zxAnXdsl2LConfSnrModeUs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter enables/disables the transmitter referred virtual
noise in the upstream direction."
DEFVAL { virtualNoiseDisabled }
::= { zxAnXdsl2SnrMarginConfPrfEntry 17 }
zxAnXdsl2LConfRaModeDs OBJECT-TYPE
SYNTAX Xdsl2RaMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mode of operation of a rate-adaptive xTU-C in the transmit
direction. The parameter can take three values:
fixed (1),
raInit (2),
dynamicRa (3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.1"
DEFVAL { raInit }
::= { zxAnXdsl2SnrMarginConfPrfEntry 18 }
zxAnXdsl2LConfRaModeUs OBJECT-TYPE
SYNTAX Xdsl2RaMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mode of operation of a rate-adaptive xTU-R in the transmit
direction. The parameter can take three values:
fixed (1),
raInit (2),
dynamicRa (3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.2"
DEFVAL { raInit }
::= { zxAnXdsl2SnrMarginConfPrfEntry 19 }
zxAnXdsl2SnrMarginConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'. "
::= { zxAnXdsl2SnrMarginConfPrfEntry 30 }
--------------------------------------------------------------------------
-- zxAnXdsl2DelayInpConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2DelayInpConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2DelayInpConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Delay-Inp Profile contains the INP and Delay values to be
defined for the enabled bearer.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 16 }
zxAnXdsl2DelayInpConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2DelayInpConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2DelayInpConfPrfName }
::= { zxAnXdsl2DelayInpConfPrfTable 1 }
ZxAnXdsl2DelayInpConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2DelayInpConfPrfName DisplayString,
zxAnXdsl2ChConfMaxDelayDs Unsigned32,
zxAnXdsl2ChConfMaxDelayUs Unsigned32,
zxAnXdsl2ChConfMinProtectDs Xdsl2SymbolProtection,
zxAnXdsl2ChConfMinProtectUs Xdsl2SymbolProtection,
zxAnXdsl2ChConfMinProtect8Ds Xdsl2SymbolProtection8,
zxAnXdsl2ChConfMinProtect8Us Xdsl2SymbolProtection8,
zxAnXdsl2ChConfForceInpDs TruthValue,
zxAnXdsl2ChConfForceInpUs TruthValue,
zxAnXdsl2ChConfMaxDelayVar Unsigned32,
zxAnXdsl2ChConfInitPolicy Xdsl2ChInitPolicy,
zxAnXdsl2DIConfPrfRowStatus RowStatus
}
zxAnXdsl2DelayInpConfPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2DelayInpConfPrfEntry 1 }
zxAnXdsl2ChConfMaxDelayDs OBJECT-TYPE
SYNTAX Unsigned32(0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Interleave Delay on Downstream direction. The
maximum one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)
and D (depth) values such that the actual one-way interleaving
delay (zxAnXdsl2Ch1StatusActDelay) is as close as possible to,
but less than or equal to zxAnXdsl2Ch1ConfPrfMaxDelayDs. The
delay is coded in ms, with the value 0 indicating no delay
bound is being imposed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2"
::= { zxAnXdsl2DelayInpConfPrfEntry 2 }
zxAnXdsl2ChConfMaxDelayUs OBJECT-TYPE
SYNTAX Unsigned32(0..63)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The xTUs shall choose the S (factor) and
D (depth) values such that the actual one-way interleaving
delay (zxAnXdsl2Ch1StatusActDelay) is as close as possible to,
but less than or equal to zxAnXdsl2Ch1ConfPrfMaxDelayUs. The
delay is coded in ms, with the value 0 indicating no delay
bound is being imposed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.2"
::= { zxAnXdsl2DelayInpConfPrfEntry 3 }
zxAnXdsl2ChConfMinProtectDs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Impulse Noise Protection on Downstream direction.
The minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not required), halfSymbol
(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps
of 1 symbol."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3"
DEFVAL { noProtection }
::= { zxAnXdsl2DelayInpConfPrfEntry 4 }
zxAnXdsl2ChConfMinProtectUs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.3"
DEFVAL { noProtection }
::= { zxAnXdsl2DelayInpConfPrfEntry 5 }
zxAnXdsl2ChConfMinProtect8Ds OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection8
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(INPMIN8ds).
This parameter specifies the minimum impulse noise protection
for the bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 8.625 kHz. The impulse noise
protection is expressed in DMT symbols with a subcarrier
spacing of 8.625 kHz and can take any integer value from
0 to 16, inclusive."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.4"
DEFVAL { noProtection }
::= { zxAnXdsl2DelayInpConfPrfEntry 6 }
zxAnXdsl2ChConfMinProtect8Us OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection8
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(INPMIN8us).
This parameter specifies the minimum impulse noise protection
for the bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 8.625 kHz. The impulse noise
protection is expressed in DMT symbols with a subcarrier
spacing of 8.625 kHz and can take any integer value from
0 to 16, inclusive."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.4"
DEFVAL { noProtection }
::= { zxAnXdsl2DelayInpConfPrfEntry 7 }
zxAnXdsl2ChConfForceInpDs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable /disable force to use INP."
::= { zxAnXdsl2DelayInpConfPrfEntry 8 }
zxAnXdsl2ChConfForceInpUs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable /disable force to use INP."
::= { zxAnXdsl2DelayInpConfPrfEntry 9 }
zxAnXdsl2ChConfMaxDelayVar OBJECT-TYPE
SYNTAX Unsigned32(1..255)
UNITS "0.1 milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum delay variation (DVMAX).
This optional VDSL2 specific parameter specifies the maximum
value for the delay variation allowed in an OLR procedure.
It is ranges from 1 to 254 units of 0.1 milliseconds
(i.e., 0.1 to 25.4 milliseconds) with the special value
255 which indicates that no delay variation bound is
imposed."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.9"
DEFVAL { 255 }
::= { zxAnXdsl2DelayInpConfPrfEntry 10 }
zxAnXdsl2ChConfInitPolicy OBJECT-TYPE
SYNTAX Xdsl2ChInitPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Channel Initialization Policy Selection (CIPOLICY).
This optional parameter indicates which policy shall be applied
to determine the transceiver configuration parameters at
initialization. The valid values for CIPOLICY are policy0 and
policy1. Those policies are defined in the respective
Recommendations."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.10"
DEFVAL { policy0 }
::= { zxAnXdsl2DelayInpConfPrfEntry 11 }
zxAnXdsl2DIConfPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'. "
::= { zxAnXdsl2DelayInpConfPrfEntry 80 }
--------------------------------------------------------------------------
-- zxAnXdsl2VirtualNoiseConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2VirtualNoiseConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2VirtualNoiseConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Line Virtual Noise Profile Table."
::= { zxAnXdsl2LineProfile 17 }
zxAnXdsl2VirtualNoiseConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2VirtualNoiseConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2VirtualNoiseConfPrfName }
::= { zxAnXdsl2VirtualNoiseConfPrfTable 1 }
ZxAnXdsl2VirtualNoiseConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2VirtualNoiseConfPrfName DisplayString,
zxAnXdsl2LConfTxRefVnDs OCTET STRING,
zxAnXdsl2LConfTxRefVnUs OCTET STRING,
zxAnXdsl2VNConfPrfRowStatus RowStatus
}
zxAnXdsl2VirtualNoiseConfPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2VirtualNoiseConfPrfEntry 1 }
zxAnXdsl2LConfTxRefVnDs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..96))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the downstream transmitter
referred virtual noise (TXREFVNds).
The TXREFVNds shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, with a
sub-carrier spacing of 4.3125 kHz, and a noise PSD level (expressed
in dBm/Hz) at that subcarrier. The set of breakpoints can then be
represented as [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)].
The subcarrier index shall be coded as an unsigned integer.
The noise level shall be coded as an 8-bit unsigned integer representing
the noise level -40 dBm/Hz (coded as 0) to -140 dBm/Hz (coded as 200),
in steps of 0.5 dBm/Hz. Values from 201 to 255 are special values
indicating a noise level of 0 W/Hz. The maximum number of breakpoints
is 32."
::= { zxAnXdsl2VirtualNoiseConfPrfEntry 2 }
zxAnXdsl2LConfTxRefVnUs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter defines the upstream transmitter
referred virtual noise (TXREFVNus). The TXREFVNus shall be
specified through a set of breakpoints. Each breakpoint shall
consist of a subcarrier index t, with a sub-carrier spacing of
4.3125 kHz, and a noise PSD level (expressed in dBm/Hz) at that
subcarrier. The set of breakpoints can then be represented as
[(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)]. The subcarrier index
shall be coded as an unsigned integer. The noise level shall be
coded as an 8-bit unsigned integer representing the noise
level -40 dBm/Hz (coded as 0) to -140 dBm/Hz (coded as 200),
in steps of 0.5 dBm/Hz. Values from 201 to 255 are special values
indicating a noise level of 0 W/Hz. The maximum number of
breakpoints is 16."
::= { zxAnXdsl2VirtualNoiseConfPrfEntry 3 }
zxAnXdsl2VNConfPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
"
::= { zxAnXdsl2VirtualNoiseConfPrfEntry 30 }
--------------------------------------------------------------------------
-- zxAnXdsl2RfiConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2RfiConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2RfiConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Line RFI Profile Table."
::= { zxAnXdsl2LineProfile 18 }
zxAnXdsl2RfiConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2RfiConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2LConfRfiPrfName }
::= { zxAnXdsl2RfiConfPrfTable 1 }
ZxAnXdsl2RfiConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2LConfRfiPrfName DisplayString,
zxAnXdsl2LConfRfiBandsDs Xdsl2RfiBands,
zxAnXdsl2RfiConfPrfRowStatus RowStatus
}
zxAnXdsl2LConfRfiPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2RfiConfPrfEntry 1 }
zxAnXdsl2LConfRfiBandsDs OBJECT-TYPE
SYNTAX Xdsl2RfiBands
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RfiBands configured in the downstream."
::= { zxAnXdsl2RfiConfPrfEntry 2 }
zxAnXdsl2RfiConfPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
"
::= { zxAnXdsl2RfiConfPrfEntry 30 }
--------------------------------------------------------------------------
-- zxAnXdsl2ProfModeSpecTable
--------------------------------------------------------------------------
zxAnXdsl2ProfModeSpecTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2ProfModeSpecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2ProfModeSpecTable extends the
DSL line configuration profile by xDSL Mode Specific
parameters.
A row in this table that has an index of
zxAnXdsl2LConfXdslMode == defMode(1), is called a
'mandatory' row.
A row in this table that has an index such that
xdsl2LConfProfXdslMode is not equal to defMode(1),
is called an 'optional' row.
When a row in the zxAnXdsl2SpectrumConfPrfTable table
(the parent row) is created, the SNMP agent will
automatically create a 'mandatory' row in this table.
When the parent row is deleted, the SNMP agent will
automatically delete all associated rows in this table.
Any attempt to delete the 'mandatory' row using the
zxAnXdsl2ProfModeSpecRowStatus attribute will be
rejected by the SNMP agent.
The manager MAY create an 'optional' row in this table
using the zxAnXdsl2ProfModeSpecRowStatus attribute if
the parent row exists.
The manager MAY delete an 'optional' row in this table
using the zxAnXdsl2ProfModeSpecRowStatus attribute at
any time.
If the actual transmission mode of a DSL line does not
match one of the 'optional' rows in this table, then
the line will use the PSD configuration from the
'mandatory' row.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2LineProfile 19 }
zxAnXdsl2ProfModeSpecEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2ProfModeSpecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2ProfModeSpecTable extends the
DSL line configuration profile by DSL Mode Specific
parameters."
INDEX { zxAnXdsl2SpectrumConfPrfName, zxAnXdsl2LConfXdslMode }
::= { zxAnXdsl2ProfModeSpecTable 1 }
ZxAnXdsl2ProfModeSpecEntry ::=
SEQUENCE {
zxAnXdsl2LConfXdslMode ZxAnXdsl2OperationModes,
zxAnXdsl2LConfMaxNomPsdDs Integer32,
zxAnXdsl2LConfMaxNomPsdUs Integer32,
zxAnXdsl2LConfMaxNomAtpDs Unsigned32,
zxAnXdsl2LConfMaxNomAtpUs Unsigned32,
zxAnXdsl2LConfMaxAggRxPwrUs Integer32,
zxAnXdsl2LConfPsdMaskDs Xdsl2PsdMaskDs,
zxAnXdsl2LConfPsdMaskUs Xdsl2PsdMaskUs,
zxAnXdsl2LConfPsdMaskSelectUs Xdsl2LinePsdMaskSelectUs,
zxAnXdsl2LConfClassMask Xdsl2LineClassMask,
zxAnXdsl2LConfLimitMask Xdsl2LineLimitMask,
zxAnXdsl2LConfUs0Disable Xdsl2LineUs0Disable,
zxAnXdsl2ProfModeSpecRowStatus RowStatus
}
zxAnXdsl2LConfXdslMode OBJECT-TYPE
SYNTAX ZxAnXdsl2OperationModes
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DSL Mode is a way of categorizing the various xDSL
transmission modes into groups, each group (xDSL Mode) shares
the same PSD configuration.
There should be multiple entries in this table for a given
line profile in case multiple bits are set in
xdsl2LConfPrfXtuTransSysEna for that profile. "
REFERENCE "DSL Forum TR-129, paragraph #5.5"
::= { zxAnXdsl2ProfModeSpecEntry 1 }
zxAnXdsl2LConfMaxNomPsdDs OBJECT-TYPE
SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMPSDds).
The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz). "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.1"
DEFVAL { -300 }
::= { zxAnXdsl2ProfModeSpecEntry 2 }
zxAnXdsl2LConfMaxNomPsdUs OBJECT-TYPE
SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMPSDus).
The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz). "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.2"
DEFVAL { -300 }
::= { zxAnXdsl2ProfModeSpecEntry 3 }
zxAnXdsl2LConfMaxNomAtpDs OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMATPds).
The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.3"
DEFVAL { 255 }
::= { zxAnXdsl2ProfModeSpecEntry 4 }
zxAnXdsl2LConfMaxNomAtpUs OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXNOMATPus).
The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.4"
DEFVAL { 255 }
::= { zxAnXdsl2ProfModeSpecEntry 5 }
zxAnXdsl2LConfMaxAggRxPwrUs OBJECT-TYPE
SYNTAX Integer32(-255..255 | 2147483647)
UNITS "0.1 dBm"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(MAXRXPWRus).
The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate
receive power value is honored. It ranges from -255 to 255
units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
A value of 0x7FFFFFFF (2147483647) means that there is no
limit."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.5"
DEFVAL { 255 }
::= { zxAnXdsl2ProfModeSpecEntry 6 }
zxAnXdsl2LConfPsdMaskDs OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(PSDMASKds).
The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 32 pairs of values in the following
structure:
Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint.
Octet 2 - The PSD reduction for the sub-carrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a 2nd breakpoint.
Octets 6-8 - Same, for a 3rd breakpoint.
This architecture continues until octets 94-95, which are
associated with a 32nd breakpoint.
Each subcarrier index is an unsigned number in the range 1 and
NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to
255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are
in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 32, all remaining
octets are set to the value 0. Note that the content of this
object should be correlated with the sub-carriers mask and with
the RFI setup. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.9"
::= { zxAnXdsl2ProfModeSpecEntry 7 }
zxAnXdsl2LConfPsdMaskUs OBJECT-TYPE
SYNTAX Xdsl2PsdMaskUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(PSDMASKus).
The upstream PSD mask applicable at the U-R2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
This is a string of 16 pairs of values in the following
structure:
Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint.
Octet 2 - The PSD reduction for the sub-carrier indicated in
octets 0 and 1.
Octets 3-5 - Same, for a 2nd breakpoint.
Octets 6-8 - Same, for a 3rd breakpoint.
This architecture continues until octets 9-47, which are
associated with a 16th breakpoint.
Each subcarrier index is an unsigned number in the range 1 and
NSCus. Each PSD reduction value is in the range 0 (0dBm/Hz) to
255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are
in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 16, all remaining
octets are set to the value 0. Note that the content of this
object should be correlated with the sub-carriers mask and with
the RFI setup. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.12"
::= { zxAnXdsl2ProfModeSpecEntry 8 }
zxAnXdsl2LConfPsdMaskSelectUs OBJECT-TYPE
SYNTAX Xdsl2LinePsdMaskSelectUs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
zxAnXdsl2LConfXtuTransSysEna. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.11"
DEFVAL { adlu56Eu56 }
::= { zxAnXdsl2ProfModeSpecEntry 9 }
zxAnXdsl2LConfClassMask OBJECT-TYPE
SYNTAX Xdsl2LineClassMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(CLASSMASK).
In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks
(see LIMITMASK) are grouped in PSD mask classes.
Each class is designed such that the PSD levels of each
limit PSD mask of a specific class are equal in their
respective passband above 276 kHz.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfPrfXtuTransSysEna object. It selects a single
PSD mask class per Annex that is activated at the
VTU-O."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.15"
DEFVAL { b998AdeM2x }
::= { zxAnXdsl2ProfModeSpecEntry 10 }
zxAnXdsl2LConfLimitMask OBJECT-TYPE
SYNTAX Xdsl2LineLimitMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(LIMITMASK).
This configuration parameter contains the G.993.2 limit
PSD masks of the selected PSD mask class, enabled by the
near-end xTU on this line for each class of profiles.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object.
Through this parameter several limit PSD masks of the
selected PSD mask class (xdsl2LConfProfClassMask) may be
enabled. The enabling parameter is coded in a bitmap
representation (0 if the associated mask is not allowed,
1 if it is allowed)."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.16"
::= { zxAnXdsl2ProfModeSpecEntry 11 }
zxAnXdsl2LConfUs0Disable OBJECT-TYPE
SYNTAX Xdsl2LineUs0Disable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Enable or disable the use of US0."
::= { zxAnXdsl2ProfModeSpecEntry 12 }
zxAnXdsl2ProfModeSpecRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
templates."
::= { zxAnXdsl2ProfModeSpecEntry 30 }
--------------------------------------------------------------------------
-- zxAnXdsl2ExtConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2ExtConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2ExtConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Line Ext Profile Table."
::= { zxAnXdsl2LineProfile 20 }
zxAnXdsl2ExtConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2ExtConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The extend profile, a default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document"
INDEX { zxAnXdsl2LConfExtPrfName }
::= { zxAnXdsl2ExtConfPrfTable 1 }
ZxAnXdsl2ExtConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2LConfExtPrfName DisplayString,
zxAnXdsl2LConfInpMinEtrUs Unsigned32,
zxAnXdsl2LConfInpMinEtrDs Unsigned32,
zxAnXdsl2LConfInpMaxEtrUs Unsigned32,
zxAnXdsl2LConfInpMaxEtrDs Unsigned32,
zxAnXdsl2LConfInpMaxNetUs Unsigned32,
zxAnXdsl2LConfInpMaxNetDs Unsigned32,
zxAnXdsl2LConfInpShineRatioUs INTEGER,
zxAnXdsl2LConfInpShineRatioDs INTEGER,
zxAnXdsl2LConfInpMinReinUs INTEGER,
zxAnXdsl2LConfInpMinReinDs INTEGER,
zxAnXdsl2LConfInpIaReinFlagUs INTEGER,
zxAnXdsl2LConfInpIaReinFlagDs INTEGER,
zxAnXdsl2LConfInpMinDelayUs INTEGER,
zxAnXdsl2LConfInpMinDelayDs INTEGER,
zxAnXdsl2LConfInpRetxModeUs INTEGER,
zxAnXdsl2LConfInpRetxModeDs INTEGER,
zxAnXdsl2LConfInpMaxDelayUs Integer32,
zxAnXdsl2LConfInpMaxDelayDs Integer32,
zxAnXdsl2LConfChanInitPolicyUs Integer32,
zxAnXdsl2LConfChanInitPolicyDs Integer32,
zxAnXdsl2LFextCancelNotReqBandDs OCTET STRING,
zxAnXdsl2LFextCancelNotReqBandUs OCTET STRING,
zxAnXdsl2LConfInpMinShineUs Integer32,
zxAnXdsl2LConfInpMinShineDs Integer32,
zxAnXdsl2LConfInpMin8ShineUs Integer32,
zxAnXdsl2LConfInpMin8ShineDs Integer32,
zxAnXdsl2LConfInpMin8ReinUs Integer32,
zxAnXdsl2LConfInpMin8ReinDs Integer32,
zxAnXdsl2ExtConfPrfRowStatus RowStatus
}
zxAnXdsl2LConfExtPrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2ExtConfPrfEntry 1 }
zxAnXdsl2LConfInpMinEtrUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
Minimum allowed value for Expected throughput(ETR).
to VDSL:range is 0-200000.
to ADSL:range is 0-10240."
::= { zxAnXdsl2ExtConfPrfEntry 10 }
zxAnXdsl2LConfInpMinEtrDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of downstream.
Minimum allowed value for Expected throughput(ETR).
to VDSL:range is 0-200000.
to ADSL:range is 0-131040."
::= { zxAnXdsl2ExtConfPrfEntry 11 }
zxAnXdsl2LConfInpMaxEtrUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
Maximum allowed value for Expected throughput(ETR).
to VDSL:range is 0-200000.
to ADSL:range is 0-10240."
::= { zxAnXdsl2ExtConfPrfEntry 12 }
zxAnXdsl2LConfInpMaxEtrDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of downstream.
Maximum allowed value for Expected throughput(ETR).
to VDSL:range is 0-200000.
to ADSL:range is 0-131040."
::= { zxAnXdsl2ExtConfPrfEntry 13 }
zxAnXdsl2LConfInpMaxNetUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
Maximum net data rate over alpha1/beta1 interface .
to VDSL:range is 0-200000.
to ADSL:range is 0-10240."
::= { zxAnXdsl2ExtConfPrfEntry 14 }
zxAnXdsl2LConfInpMaxNetDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of downstream.
Maximum net data rate over alpha1/beta1 interface.
to VDSL:range is 0-200000.
to ADSL:range is 0-131040."
::= { zxAnXdsl2ExtConfPrfEntry 15 }
zxAnXdsl2LConfInpShineRatioUs OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
The loss of rate in a 1 second interval expressed as a fraction of
NDR(Net data rate) due to a SHINE impulse noise environment expected
by the operator to occur at a probability acceptable for the
services.
It shall be represented as a 8-bit unsigned integer SHINEratio, with
the value of SHINEratio defined as SHINEratio = (0.001* SHINEratio).
This data format supports a range from 0 to 0.1 with granularity of
0.001."
DEFVAL { 0 }
::= { zxAnXdsl2ExtConfPrfEntry 16 }
zxAnXdsl2LConfInpShineRatioDs OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of downstream.
The loss of rate in a 1 second interval expressed as a fraction of
NDR(Net data rate) due to a SHINE impulse noise environment expected
by the operator to occur at a probability acceptable for the
services.
It shall be represented as a 8-bit unsigned integer SHINEratio, with
the value of SHINEratio defined as SHINEratio = (0.001* SHINEratio).
This data format supports a range from 0 to 0.1 with granularity of
0.001."
DEFVAL { 0 }
::= { zxAnXdsl2ExtConfPrfEntry 17 }
zxAnXdsl2LConfInpMinReinUs OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
Minimum impulse protection against electrical repetitive impulse
noise in DMT symbols.
"
DEFVAL { 0 }
::= { zxAnXdsl2ExtConfPrfEntry 18 }
zxAnXdsl2LConfInpMinReinDs OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of downstream.
Minimum impulse protection against electrical repetitive impulse
noise in DMT symbols.
"
DEFVAL { 0 }
::= { zxAnXdsl2ExtConfPrfEntry 19 }
zxAnXdsl2LConfInpIaReinFlagUs OBJECT-TYPE
SYNTAX INTEGER {
hz100(1),
hz120(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
Configuration flag indicating the inter-arrival of REIN.
"
DEFVAL { hz100 }
::= { zxAnXdsl2ExtConfPrfEntry 20 }
zxAnXdsl2LConfInpIaReinFlagDs OBJECT-TYPE
SYNTAX INTEGER{
hz100(1),
hz120(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of downstream.
Configuration flag indicating the inter-arrival of REIN.
"
DEFVAL { hz100 }
::= { zxAnXdsl2ExtConfPrfEntry 21 }
zxAnXdsl2LConfInpMinDelayUs OBJECT-TYPE
SYNTAX INTEGER(0..63)
UNITS "ms"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
Minimum delay in ms.
"
DEFVAL { 0 }
::= { zxAnXdsl2ExtConfPrfEntry 22 }
zxAnXdsl2LConfInpMinDelayDs OBJECT-TYPE
SYNTAX INTEGER(0..63)
UNITS "ms"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of downstream.
Minimum delay in ms.
"
DEFVAL { 0 }
::= { zxAnXdsl2ExtConfPrfEntry 23 }
zxAnXdsl2LConfInpRetxModeUs OBJECT-TYPE
SYNTAX INTEGER{
forbidden(1),
preferred(2),
forced(3),
testMode(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream used to control
activation of retransmission during initialization.
forbidden(1) - G.998.4 retransmission not allowed;
preferred(2) - G.998.4 retransmission is preferred by the operator;
forced(3) - Force the use of the G.998.4 retransmission;
testMode(4) - Force the use of the G.998.4 retransmission in the
test mode;
"
DEFVAL { forbidden }
REFERENCE "ITU-T G.998.4, paragraph #11.1.13"
::= { zxAnXdsl2ExtConfPrfEntry 24 }
zxAnXdsl2LConfInpRetxModeDs OBJECT-TYPE
SYNTAX INTEGER{
forbidden(1),
preferred(2),
forced(3),
testMode(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream used to control
activation of retransmission during initialization.
forbidden(1) - G.998.4 retransmission not allowed;
preferred(2) - G.998.4 retransmission is preferred by the operator;
forced(3) - Force the use of the G.998.4 retransmission;
testMode(4) - Force the use of the G.998.4 retransmission in the
test mode;
"
DEFVAL { forbidden }
REFERENCE "ITU-T G.998.4, paragraph #11.1.13"
::= { zxAnXdsl2ExtConfPrfEntry 25 }
zxAnXdsl2LConfInpMaxDelayUs OBJECT-TYPE
SYNTAX Integer32(0..63)
UNITS "ms"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
Maximum delay in milliseconds.
"
DEFVAL { 0 }
REFERENCE "ITU-T G.998.4, paragraph #8.1.6"
::= { zxAnXdsl2ExtConfPrfEntry 26 }
zxAnXdsl2LConfInpMaxDelayDs OBJECT-TYPE
SYNTAX Integer32(0..63)
UNITS "ms"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of downstream.
Maximum delay in milliseconds.
"
DEFVAL { 0 }
REFERENCE "ITU-T G.998.4, paragraph #8.1.6"
::= { zxAnXdsl2ExtConfPrfEntry 27 }
zxAnXdsl2LConfChanInitPolicyUs OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The channel initialisation policy of upstream used by the receiver
to select the values of transceiver parameters.
Support of Channel Initialization Policy 0 is mandatory.
The CIpolicyn parameter values other than 0 are reserved for use
by the ITU-T.
"
DEFVAL { 0 }
REFERENCE "ITU-T G.998.4, paragraph #11.5"
::= { zxAnXdsl2ExtConfPrfEntry 28 }
zxAnXdsl2LConfChanInitPolicyDs OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The channel initialisation policy of downstream used by the
receiver to select the values of transceiver parameters.
Support of Channel Initialization Policy 0 is mandatory.
The CIpolicyn parameter values other than 0 are reserved for use
by the ITU-T.
"
DEFVAL { 0 }
REFERENCE "ITU-T G.998.4, paragraph #11.5"
::= { zxAnXdsl2ExtConfPrfEntry 29 }
zxAnXdsl2LFextCancelNotReqBandDs OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter shall be an array of pairs of
downstream sub-carrier indices. Each pair represents the start and
stop sub-carrier index of a frequency band in which FEXT
cancellation is not required. Up to 8 frequency bands may be
configured.
The same configuration shall be applied for all lines in the
vectored group."
REFERENCE "ITU-T G.993.5, paragraph #11.1.2"
::= { zxAnXdsl2ExtConfPrfEntry 30 }
zxAnXdsl2LFextCancelNotReqBandUs OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration parameter shall be an array of pairs of
upstream sub-carrier indices. Each pair represents the start and
stop sub-carrier index of a frequency band in which FEXT
cancellation is not required. Up to 8 frequency bands may be
configured.
The same configuration shall be applied for all lines in the
vectored group."
REFERENCE "ITU-T G.993.5, paragraph #11.1.2"
::= { zxAnXdsl2ExtConfPrfEntry 31 }
zxAnXdsl2LConfInpMinShineUs OBJECT-TYPE
SYNTAX Integer32(0..63)
UNITS "DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
The INPMIN_SHINE_RTX is a configuration parameter that, for the
case of subcarrier spacing of 4.3125kHz, is used to derive the
control parameter INP_min which specifies the minimum impulse
noise protection against SHINE.
It is used in the Channel Initialization Policy and on-line
reconfiguration procedures.
The downstream and upstream values of INPMIN_SHINE_RTX shall be
configured in the CO MIB.
The value range from 0 to 63 DMT symbols of 4.3125 kHz in steps of
1 DMT.
The control parameter INP_min shall be set to the same value as the
configuration parameter INPMIN_SHINE_RTX."
REFERENCE "ITU-T G.998.4, paragraph #11.1.6"
::= { zxAnXdsl2ExtConfPrfEntry 32 }
zxAnXdsl2LConfInpMinShineDs OBJECT-TYPE
SYNTAX Integer32(0..63)
UNITS "DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
The INPMIN_SHINE_RTX is a configuration parameter that, for the
case of subcarrier spacing of 4.3125kHz, is used to derive the
control parameter INP_min which specifies the minimum impulse
noise protection against SHINE.
It is used in the Channel Initialization Policy and on-line
reconfiguration procedures.
The downstream and upstream values of INPMIN_SHINE_RTX shall be
configured in the CO MIB.
The value range from 0 to 63 DMT symbols of 4.3125 kHz in steps of
1 DMT.
The control parameter INP_min shall be set to the same value as the
configuration parameter INPMIN_SHINE_RTX."
REFERENCE "ITU-T G.998.4, paragraph #11.1.6"
::= { zxAnXdsl2ExtConfPrfEntry 33 }
zxAnXdsl2LConfInpMin8ShineUs OBJECT-TYPE
SYNTAX Integer32(0..127)
UNITS "DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
The INPMIN8_SHINE_RTX is a configuration parameter that, for the
case of subcarrier spacing of 8.625kHz, is used to derive the
control parameter INP_min which specifies the minimum impulse
noise protection against SHINE.
It is used in the Channel Initialization Policy and on-line
reconfiguration procedures.
The downstream and upstream values of INPMIN8_SHINE_RTX shall be
configured in the CO MIB.
The value range from 0 to 127 DMT symbols of 8.625 kHz in steps of
1 DMT.
The control parameter INP_min shall be set to the same value as the
configuration parameter INPMIN8_SHINE_RTX."
REFERENCE "ITU-T G.998.4, paragraph #11.1.7"
::= { zxAnXdsl2ExtConfPrfEntry 34 }
zxAnXdsl2LConfInpMin8ShineDs OBJECT-TYPE
SYNTAX Integer32(0..127)
UNITS "DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
The INPMIN8_SHINE_RTX is a configuration parameter that, for the
case of subcarrier spacing of 8.625kHz, is used to derive the
control parameter INP_min which specifies the minimum impulse
noise protection against SHINE.
It is used in the Channel Initialization Policy and on-line
reconfiguration procedures.
The downstream and upstream values of INPMIN8_SHINE_RTX shall be
configured in the CO MIB.
The value range from 0 to 127 DMT symbols of 8.625 kHz in steps of
1 DMT.
The control parameter INP_min shall be set to the same value as the
configuration parameter INPMIN8_SHINE_RTX."
REFERENCE "ITU-T G.998.4, paragraph #11.1.7"
::= { zxAnXdsl2ExtConfPrfEntry 35 }
zxAnXdsl2LConfInpMin8ReinUs OBJECT-TYPE
SYNTAX Integer32(0..13)
UNITS "DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
The INPMIN8_REIN_RTX is a configuration parameter that, for the
case of subcarrier spacing of 8.625kHz, is used to derive the
control parameter INP_min which specifies the minimum impulse
noise protection against REIN.
It is used in the Channel Initialization Policy and on-line
reconfiguration procedures.
The downstream and upstream values of INPMIN8_SHINE_RTX shall be
configured in the CO MIB.
The value range from 0 to 13 DMT symbols of 8.625 kHz in steps of
1 DMT.
The control parameter INP_min shall be set to the same value as the
configuration parameter INPMIN8_REIN_RTX."
REFERENCE "ITU-T G.998.4, paragraph #11.1.10"
::= { zxAnXdsl2ExtConfPrfEntry 36 }
zxAnXdsl2LConfInpMin8ReinDs OBJECT-TYPE
SYNTAX Integer32(0..13)
UNITS "DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"GINP configuration parameters of upstream.
The INPMIN8_REIN_RTX is a configuration parameter that, for the
case of subcarrier spacing of 8.625kHz, is used to derive the
control parameter INP_min which specifies the minimum impulse
noise protection against REIN.
It is used in the Channel Initialization Policy and on-line
reconfiguration procedures.
The downstream and upstream values of INPMIN8_SHINE_RTX shall be
configured in the CO MIB.
The value range from 0 to 13 DMT symbols of 8.625 kHz in steps of
1 DMT.
The control parameter INP_min shall be set to the same value as the
configuration parameter INPMIN8_REIN_RTX."
REFERENCE "ITU-T G.998.4, paragraph #11.1.10"
::= { zxAnXdsl2ExtConfPrfEntry 37 }
zxAnXdsl2ExtConfPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
"
::= { zxAnXdsl2ExtConfPrfEntry 50 }
--------------------------------------------------------------------------
-- zxAnXdsl2SosConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2SosConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2SosConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Line SOS Profile Table."
::= { zxAnXdsl2LineProfile 21 }
zxAnXdsl2SosConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2SosConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Line SOS profile entry."
INDEX { zxAnXdsl2LConfSosPrfName }
::= { zxAnXdsl2SosConfPrfTable 1 }
ZxAnXdsl2SosConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2LConfSosPrfName DisplayString,
zxAnXdsl2LConfSosTimeWindowDs Integer32,
zxAnXdsl2LConfSosTimeWindowUs Integer32,
zxAnXdsl2LConfSosNTonesDs Integer32,
zxAnXdsl2LConfSosNTonesUs Integer32,
zxAnXdsl2LConfSosCrcDs Integer32,
zxAnXdsl2LConfSosCrcUs Integer32,
zxAnXdsl2LConfMaximumSosDs Integer32,
zxAnXdsl2LConfMaximumSosUs Integer32,
zxAnXdsl2LConfSosSnrmOffsetRocDs Integer32,
zxAnXdsl2LConfSosSnrmOffsetRocUs Integer32,
zxAnXdsl2LConfSosMinInpRocDs Xdsl2SymbolProtection,
zxAnXdsl2LConfSosMinInpRocUs Xdsl2SymbolProtection,
zxAnXdsl2LConfSosPrfRowStatus RowStatus
}
zxAnXdsl2LConfSosPrfName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2SosConfPrfEntry 1 }
zxAnXdsl2LConfSosTimeWindowDs OBJECT-TYPE
SYNTAX Integer32(0|64..16320)
UNITS "ms"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The parameter SOS-TIME-ds is used in the specification of the
receiver initiated SOS(see 13.4.3/G.993.2). If the value of this
parameter is not zero, the standard SOS triggering criteria are
enabled, and the value corresponds with duration of the time
window used in the standard SOS triggering criteria in the
downstream direction. See G.993.2 for detailed usage rules.
The special value zero indicates that the standard SOS triggering
criteria are disabled, i.e., vendordiscretionary values may be
used instead of the values configured in the MIB for the following
parameters: SOS-NTONES-ds, SOS-CRC-ds, SOS-TIME-ds.
This parameter applies in the downstream direction. The valid
range of non-zero values is from 64 ms to 16320 ms in steps of 64
ms."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.2
ITU-T G.993.2, paragraph #13.4.3.1.1"
DEFVAL { 0 }
::= { zxAnXdsl2SosConfPrfEntry 2 }
zxAnXdsl2LConfSosTimeWindowUs OBJECT-TYPE
SYNTAX Integer32(0|64..16320)
UNITS "ms"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The parameter SOS-TIME-us is used in the specification of the
receiver initiated SOS (see 13.4.3/G.993.2). If the value of this
parameter is not zero, the standard SOS triggering criteria are
enabled, and the value corresponds with duration of the time
window used in the standard SOS triggering criteria in the
upstream direction. See G.993.2 for detailed usage rules.
The special value zero indicates that the standard SOS triggering
criteria are disabled, i.e.,vendor-discretionary values may be
used instead of the values configured in the MIB for the following
parameters: SOS-NTONES-us, SOS-CRC-us, SOS-TIME-us.
This parameter applies in the upstream direction. The valid range
of non-zero values is from 64 ms to 16320 ms in steps of 64 ms."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.2
ITU-T G.993.2, paragraph #13.4.3.1.1"
DEFVAL { 0 }
::= { zxAnXdsl2SosConfPrfEntry 3 }
zxAnXdsl2LConfSosNTonesDs OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter is defined as the minimum percentage of tones in the
downstream MEDLEY SET that must be degraded in order to arm the
first sub-condition of the standard SOS triggering criteria
(see 13.4.3.2/G.993.2) in the downstream direction. The parameter
SOS-NTONES-ds is defined as a percentage of tones. See G.993.2 for
detailed usage rules.
The valid range of values is from 0 to 100 in steps of 1. A special
value of 0 indicates that SOS-NTONES-ds is not used in the decision
criteria."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.3
ITU-T G.993.2, paragraph #13.4.3.1.2"
::= { zxAnXdsl2SosConfPrfEntry 4 }
zxAnXdsl2LConfSosNTonesUs OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum percentage of tones in the upstream MEDLEY SET that
must be degraded in order to arm the first sub-condition of the
standard SOS triggering criteria (see 13.4.3.2/G.993.2) in the
upstream direction. The parameter SOS-NTONES-us is defined as a
percentage of tones. See G.993.2 for detailed usage rules.
The valid range of values is from 0 to 100 in steps of 1. A special
value of 0 indicates that SOS-NTONES-ds is not used in the decision
criteria."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.4
ITU-T G.993.2, paragraph #13.4.3.1.2"
::= { zxAnXdsl2SosConfPrfEntry 5 }
zxAnXdsl2LConfSosCrcDs OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter is defined as the minimum number of normalized CRC
anomalies received in SOSTIME-ds seconds in order to arm the
second sub-condition of the standard SOS triggering criteria
(see 13.4.3.2/G.993.2) in the downstream direction. See G.993.2
for detailed usage rules.
The valid range of SOS-CRC values is 0.02 to ((2^16)-1) X 0.02, in
steps of 0.02."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.5
ITU-T G.993.2, paragraph #13.4.3.1.3"
::= { zxAnXdsl2SosConfPrfEntry 6 }
zxAnXdsl2LConfSosCrcUs OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter is defined as the minimum number of normalized CRC
anomalies received in SOSTIME-us seconds in order to arm the
second sub-condition of the standard SOS triggering criteria
(see 13.4.3.2/G.993.2) in the upstream direction. See G.993.2 for
detailed usage rules.
The valid range of SOS-CRC values is 0.02 to ((2^16)-1) X 0.02, in
steps of 0.02."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.6
ITU-T G.993.2, paragraph #13.4.3.1.3"
::= { zxAnXdsl2SosConfPrfEntry 7 }
zxAnXdsl2LConfMaximumSosDs OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter is used in G.993.2 de-activation
(see 12.1.4/G.993.2). If the number of successful SOS procedures
in the downstream direction performed within a 120-second interval
exceeds MAX-SOS-ds, the modem shall transition to the L3 state.
See G.993.2 for detailed usage rules (see 12.1.4/G.993.2).
The valid range of values is 0 to 15. A special value of 0
indicates that there is no limit on the maximum allowed number of
SOS recoveries within this time interval."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.7
ITU-T G.993.2, paragraph #12.1.4"
::= { zxAnXdsl2SosConfPrfEntry 8 }
zxAnXdsl2LConfMaximumSosUs OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter is used in G.993.2 de-activation
(see 12.1.4/G.993.2). If the number of successful SOS procedures
in the upstream direction performed within a 120-second interval
exceeds MAX-SOS-us, the modem shall transition to the L3 state.
See G.993.2 for detailed usage rules (see 12.1.4/G.993.2).
The valid range of values is 0 to 15. A special value of 0
indicates that there is no limit on the maximum allowed number of
SOS recoveries within this time interval."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.8
ITU-T G.993.2, paragraph #12.1.4"
::= { zxAnXdsl2SosConfPrfEntry 9 }
zxAnXdsl2LConfSosSnrmOffsetRocDs OBJECT-TYPE
SYNTAX Integer32(0..310)
UNITS "0.1dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The parameter is defined as the SNR margin offset for the ROC
channel in the downstream direction.
The parameter is used in the specification of the channel
initialization policy (see 12.3.7.1/G.993.2).
The valid range of SNR margin offset values is from 0 to 31 dB
with 0.1 dB steps."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.9
ITU-T G.993.2, paragraph #12.3.7.1"
::= { zxAnXdsl2SosConfPrfEntry 10 }
zxAnXdsl2LConfSosSnrmOffsetRocUs OBJECT-TYPE
SYNTAX Integer32(0..310)
UNITS "0.1dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The parameter is defined as the SNR margin offset for the ROC
channel in the upstream direction.
The parameter is used in the specification of the channel
initialization policy (see 12.3.7.1/G.993.2).
The valid range of SNR margin offset values is from 0 to 31 dB
with 0.1 dB steps."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.10
ITU-T G.993.2, paragraph #12.3.7.1"
::= { zxAnXdsl2SosConfPrfEntry 11 }
zxAnXdsl2LConfSosMinInpRocDs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter contains the minimum impulse noise protection to
apply on the ROC in the downstream direction.
The minimum impulse noise protection is an integer ranging from 0
to 16."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.11"
::= { zxAnXdsl2SosConfPrfEntry 12 }
zxAnXdsl2LConfSosMinInpRocUs OBJECT-TYPE
SYNTAX Xdsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter contains the minimum impulse noise protection to
apply on the robust ROC in the upstream direction.
The minimum impulse noise protection is an integer ranging from 0
to 16."
REFERENCE
"ITU-T G.997.1, paragraph #7.3.1.10.12"
::= { zxAnXdsl2SosConfPrfEntry 13 }
zxAnXdsl2LConfSosPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.
To create a row in this table, a manager must set this object to
createAndGo(4), and must comply with the multi-variables binding
rule described in zxAnXdsl2SosConfPrfEntry
To delete a row in this table, a manager must set this object to
destroy(6).
To get this object, the agent always returns active(1)."
::= { zxAnXdsl2SosConfPrfEntry 50 }
--------------------------------------------------------------------------
-- zxAnXdsl2InmConfPrfTable
--------------------------------------------------------------------------
zxAnXdsl2InmConfPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2InmConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Line INM Profile Table."
::= { zxAnXdsl2LineProfile 22 }
zxAnXdsl2InmConfPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2InmConfPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Line INM profile entry."
INDEX { zxAnXdsl2LConfInmPrfName }
::= { zxAnXdsl2InmConfPrfTable 1 }
ZxAnXdsl2InmConfPrfEntry ::=
SEQUENCE {
zxAnXdsl2LConfInmPrfName DisplayString,
zxAnXdsl2LConfInmInpEqModeUs Unsigned32,
zxAnXdsl2LConfInmInpEqModeDs Unsigned32,
zxAnXdsl2LConfInmIatoUs Unsigned32,
zxAnXdsl2LConfInmIatoDs Unsigned32,
zxAnXdsl2LConfInmIatsUs Unsigned32,
zxAnXdsl2LConfInmIatsDs Unsigned32,
zxAnXdsl2LConfInmCcUs Unsigned32,
zxAnXdsl2LConfInmCcDs Unsigned32,
zxAnXdsl2LConfInmPrfRowStatus RowStatus
}
zxAnXdsl2LConfInmPrfName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2InmConfPrfEntry 1 }
zxAnXdsl2LConfInmInpEqModeUs OBJECT-TYPE
SYNTAX Unsigned32(0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"INM configuration parameters.
This is the INM Equivalent INP Mode that the xTU receiver
shall use in the computation of the Equivalent INP,
as defined in the relevant ITU-T Recommendation.
The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.9.4"
DEFVAL { 0 }
::= { zxAnXdsl2InmConfPrfEntry 2 }
zxAnXdsl2LConfInmInpEqModeDs OBJECT-TYPE
SYNTAX Unsigned32(0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"INM configuration parameters.
This is the INM Equivalent INP Mode that the xTU receiver
shall use in the computation of the Equivalent INP,
as defined in the relevant ITU-T Recommendation.
The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.9.4"
DEFVAL { 0 }
::= { zxAnXdsl2InmConfPrfEntry 3 }
zxAnXdsl2LConfInmIatoUs OBJECT-TYPE
SYNTAX Unsigned32(3..511)
UNITS "1 DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"INM configuration parameters.
This is the Inter Arrival Time Offset that the xTU receiver
shall use to determine in which bin of the Inter Arrival Time
histogram the IAT is reported.
The valid values for INMIATO ranges from 3 to 511 DMT symbols
in steps of 1 DMT symbol."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.9.1"
DEFVAL { 3 }
::= { zxAnXdsl2InmConfPrfEntry 4 }
zxAnXdsl2LConfInmIatoDs OBJECT-TYPE
SYNTAX Unsigned32(3..511)
UNITS "1 DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"INM configuration parameters.
This is the Inter Arrival Time Offset that the xTU receiver
shall use to determine in which bin of the Inter Arrival Time
histogram the IAT is reported.
The valid values for INMIATO ranges from 3 to 511 DMT symbols
in steps of 1 DMT symbol."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.9.1"
DEFVAL { 3 }
::= { zxAnXdsl2InmConfPrfEntry 5 }
zxAnXdsl2LConfInmIatsUs OBJECT-TYPE
SYNTAX Unsigned32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"INM configuration parameters.
This is the Inter Arrival Time Step that the xTU receiver
shall use to determine in which bin of the Inter Arrival
Time histogram the IAT is reported.
The valid values for INMIATS ranges from 0 to 7 in steps of 1."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.9.2"
DEFVAL { 0 }
::= { zxAnXdsl2InmConfPrfEntry 6 }
zxAnXdsl2LConfInmIatsDs OBJECT-TYPE
SYNTAX Unsigned32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"INM configuration parameters.
This is the Inter Arrival Time Step that the xTU receiver
shall use to determine in which bin of the Inter Arrival
Time histogram the IAT is reported.
The valid values for INMIATS ranges from 0 to 7 in steps of 1."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.9.2"
DEFVAL { 0 }
::= { zxAnXdsl2InmConfPrfEntry 7 }
zxAnXdsl2LConfInmCcUs OBJECT-TYPE
SYNTAX Unsigned32(0..64)
UNITS "1 DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"INM configuration parameters.
This is the Cluster Continuation value that the xTU receiver
shall use in the cluster indication process described in the
relevant ITU-T Recommendation.
The valid values for INMCC range from 0 to 64 DMT symbols
in steps of 1 DMT symbol."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.9.3"
DEFVAL { 0 }
::= { zxAnXdsl2InmConfPrfEntry 8 }
zxAnXdsl2LConfInmCcDs OBJECT-TYPE
SYNTAX Unsigned32(0..64)
UNITS "1 DMT symbol"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"INM configuration parameters.
This is the Cluster Continuation value that the xTU receiver
shall use in the cluster indication process described in the
relevant ITU-T Recommendation.
The valid values for INMCC range from 0 to 64 DMT symbols
in steps of 1 DMT symbol."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.9.3"
DEFVAL { 0 }
::= { zxAnXdsl2InmConfPrfEntry 9 }
zxAnXdsl2LConfInmPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.
To create a row in this table, a manager must set this object to
createAndGo(4), and must comply with the multi-variables binding
rule described in zxAnXdsl2InmConfPrfEntry
To delete a row in this table, a manager must set this object to
destroy(6).
To get this object, the agent always returns active(1)."
::= { zxAnXdsl2InmConfPrfEntry 50 }
--------------------------------------------------------------------------
-- zxAnXdsl2AlmThreshPrfTable
--------------------------------------------------------------------------
zxAnXdsl2AlmThreshPrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2AlmThreshPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2AlmThreshPrfTable contains DSL
line PM thresholds profiles.
Entries in this table MUST be maintained in a
persistent manner."
::= { zxAnXdsl2AlarmProfile 1 }
zxAnXdsl2AlmThreshPrfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2AlmThreshPrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2AlmThreshPrfTable contains DSL
line PM thresholds profiles.
A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
document"
INDEX { zxAnXdsl2AlmThreshPrfName }
::= { zxAnXdsl2AlmThreshPrfTable 1 }
ZxAnXdsl2AlmThreshPrfEntry ::=
SEQUENCE {
zxAnXdsl2AlmThreshPrfName SnmpAdminString,
zxAnXdsl2XtucThreshFecs HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshEs HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshSes HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshLoss HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshLofs HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshLols HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshLprs HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshUas HCPerfIntervalThreshold,
zxAnXdsl2XtucThreshPtmCrcErrs Unsigned32,
zxAnXdsl2XtucThreshPtmCodViol Unsigned32,
zxAnXdsl2XturThreshFecs HCPerfIntervalThreshold,
zxAnXdsl2XturThreshEs HCPerfIntervalThreshold,
zxAnXdsl2XturThreshSes HCPerfIntervalThreshold,
zxAnXdsl2XturThreshLoss HCPerfIntervalThreshold,
zxAnXdsl2XturThreshLofs HCPerfIntervalThreshold,
-- zxAnXdsl2XturThreshLols HCPerfIntervalThreshold,
zxAnXdsl2XturThreshLprs HCPerfIntervalThreshold,
zxAnXdsl2XturThreshUas HCPerfIntervalThreshold,
zxAnXdsl2XturThreshPtmCrcErrs Unsigned32,
zxAnXdsl2XturThreshPtmCodViol Unsigned32,
zxAnXdsl2ThreshFailedFullInt Unsigned32,
zxAnXdsl2ThreshFailedShrtInt Unsigned32,
zxAnXdsl2Ch1XtucThrshCodeViol Unsigned32,
zxAnXdsl2Ch1XtucThrshCorrected Unsigned32,
zxAnXdsl2Ch1XturThrshCodeViol Unsigned32,
zxAnXdsl2Ch1XturThrshCorrected Unsigned32,
zxAnXdsl2Ch2XtucThrshCodeViol Unsigned32,
zxAnXdsl2Ch2XtucThrshCorrected Unsigned32,
zxAnXdsl2Ch2XturThrshCodeViol Unsigned32,
zxAnXdsl2Ch2XturThrshCorrected Unsigned32,
zxAnXdsl2AlmThreshPrfRowStatus RowStatus,
zxAnXdsl2XtucLowDataRateTolerance INTEGER,
zxAnXdsl2XturLowDataRateTolerance INTEGER,
zxAnXdsl2XtucLowDataRateThresh Integer32,
zxAnXdsl2XturLowDataRateThresh Integer32,
zxAnXdsl2XtucInitFailTrapEnable BITS,
zxAnXdsl2XturInitFailTrapEnable BITS,
zxAnXdsl2XtucThreshInpLeftr INTEGER,
zxAnXdsl2XturThreshInpLeftr INTEGER,
zxAnXdsl2XtucEsLossRatioThresh Integer32,
zxAnXdsl2XturEsLossRatioThresh Integer32,
zxAnXdsl2XtucThreshInpLeftrs HCPerfIntervalThreshold,
zxAnXdsl2XturThreshInpLeftrs HCPerfIntervalThreshold
}
zxAnXdsl2AlmThreshPrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a row in this table."
::= { zxAnXdsl2AlmThreshPrfEntry 1 }
zxAnXdsl2XtucThreshFecs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MFecs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 2 }
zxAnXdsl2XtucThreshEs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MEs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 3 }
zxAnXdsl2XtucThreshSes OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MSes counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 4 }
zxAnXdsl2XtucThreshLoss OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 5 }
zxAnXdsl2XtucThreshLofs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 6}
zxAnXdsl2XtucThreshLols OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 7}
zxAnXdsl2XtucThreshLprs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 8}
zxAnXdsl2XtucThreshUas OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MUas counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 9 }
zxAnXdsl2XtucThreshPtmCrcErrs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 10}
zxAnXdsl2XtucThreshPtmCodViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 11}
zxAnXdsl2XturThreshFecs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MFecs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 12 }
zxAnXdsl2XturThreshEs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MEs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 13 }
zxAnXdsl2XturThreshSes OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MSes counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 14 }
zxAnXdsl2XturThreshLoss OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 15 }
zxAnXdsl2XturThreshLofs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 16}
-- zxAnXdsl2XturThreshLols OBJECT-TYPE
-- SYNTAX HCPerfIntervalThreshold
-- UNITS "seconds"
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "A threshold for the xdsl2PMLCurr15MLoss counter,
-- when xdsl2PMLCurrUnit is xtur {2}.
-- The value 0 means that no threshold is specified for the
-- associated counter."
-- DEFVAL { 0 }
-- ::= { zxAnXdsl2AlmThreshPrfEntry 17}
zxAnXdsl2XturThreshLprs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 18}
zxAnXdsl2XturThreshUas OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurr15MUas counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 19 }
zxAnXdsl2XturThreshPtmCrcErrs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 20}
zxAnXdsl2XturThreshPtmCodViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 21}
zxAnXdsl2ThreshFailedFullInt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurrInit15MfailedFullInits
counter.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 22 }
zxAnXdsl2ThreshFailedShrtInt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMLCurrInit15MFailedShortInits
counter.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 23 }
zxAnXdsl2Ch1XtucThrshCodeViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 24 }
zxAnXdsl2Ch1XtucThrshCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 25 }
zxAnXdsl2Ch1XturThrshCodeViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 26 }
zxAnXdsl2Ch1XturThrshCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 27 }
zxAnXdsl2Ch2XtucThrshCodeViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 28 }
zxAnXdsl2Ch2XtucThrshCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 29 }
zxAnXdsl2Ch2XturThrshCodeViol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 30 }
zxAnXdsl2Ch2XturThrshCorrected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 31 }
zxAnXdsl2AlmThreshPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated
templates."
::= { zxAnXdsl2AlmThreshPrfEntry 32 }
zxAnXdsl2XtucLowDataRateTolerance OBJECT-TYPE
SYNTAX INTEGER(0..100)
UNITS "%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tolerance between zxAnXdsl2ChConfMaxDataRateDs and
xdsl2ChStatusActDataRate(xtuc).
Calculation:
100*(zxAnXdsl2ChConfMaxDataRateDs - xdsl2ChStatusActDataRate(xtuc))
Difference =-------------------------------------------------------------------
zxAnXdsl2ChConfMaxDataRateDs
If Difference is larger than zxAnXdsl2XtucLowDataRateTolerance,
zxAnXdsl2LineXtucLowDataRateTrap will be sent.
A value of `0' will disable the trap. "
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 33 }
zxAnXdsl2XturLowDataRateTolerance OBJECT-TYPE
SYNTAX INTEGER(0..100)
UNITS "%"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tolerance between zxAnXdsl2ChConfMaxDataRateUs and
xdsl2ChStatusActDataRate(xtur).
Calculation:
100*(zxAnXdsl2ChConfMaxDataRateUs - xdsl2ChStatusActDataRate(xtur))
Difference =-------------------------------------------------------------------
zxAnXdsl2ChConfMaxDataRateUs
If Difference is larger than zxAnXdsl2XturLowDataRateTolerance,
zxAnXdsl2LineXturLowDataRateTrap will be sent.
A value of `0' will disable the trap. "
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 34 }
zxAnXdsl2XtucLowDataRateThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Threshold of xtuc data rate.
If xdsl2ChStatusActDataRate(xtuc) is lower than zxAnXdsl2XtucLowDataRateThresh,
zxAnXdsl2LineXtucLowDataRateTrap will be sent.
A value of `0' will disable the trap. "
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 35 }
zxAnXdsl2XturLowDataRateThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Threshold of xtur data rate.
If xdsl2ChStatusActDataRate(xtur) is lower than zxAnXdsl2XturLowDataRateThresh,
zxAnXdsl2LineXturLowDataRateTrap will be sent.
A value of `0' will disable the trap. "
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 36 }
zxAnXdsl2XtucInitFailTrapEnable OBJECT-TYPE
SYNTAX BITS {
unused1 (0),
lossOfFraming (1),
lossOfSignal (2),
lossOfPower (3),
initFailure (4),
lossOfSignalQuality (5),
lossOfLink (6),
lossOfSignalAlm (7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables and disables the InitFailureTrap on the xTU-C interface.
unused1 (0) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-C
interface.
lossOfFraming (1) - Value 0 means disable the loss of frame
synchronization trap on the xTU-C
interface.
lossOfSignal (2) - Value 0 means disable the loss of signal
trap on the xTU-C interface.
lossOfPower (3) - Value 0 means disable the loss of power
trap on the xTU-C interface.
initFailure (4) - Value 0 means disable the initialization
failure trap on the xTU-C interface.
lossOfSignalQuality (5) - Value 0 means disable the loss of signal
quality trap on the xTU-C interface.
lossOfLink (6) - Value 0 means disable the loss of link
quality trap on the xTU-C interface.
lossOfSignalAlm (7) - Value 0 means disable the loss of signal
alarm on the xTU-C interface.
"
REFERENCE "Used by MAP"
::= { zxAnXdsl2AlmThreshPrfEntry 37 }
zxAnXdsl2XturInitFailTrapEnable OBJECT-TYPE
SYNTAX BITS{
unused1 (0),
lossOfFraming (1),
lossOfSignal (2),
lossOfPower (3),
unused2 (4),
lossOfSignalQuality (5),
unused3 (6),
lossOfSignalAlm (7),
lossOfPowerAlm (8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables and disables the InitFailureTrap on the xTU-R interface.
unused1 (0) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfFraming (1) - Value 0 means disable the loss of frame
synchronization trap on the xTU-R
interface.
lossOfSignal (2) - Value 0 means disable the loss of signal
trap on the xTU-R interface.
lossOfPower (3) - Value 0 means disable the loss of power
trap on the xTU-R interface.
unused2 (4) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfSignalQuality (5) - Value 0 means disable the loss of signal
quality trap on the xTU-C interface.
unused3 (6) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
interface.
lossOfSignalAlm (7) - Value 0 means disable the loss of signal
alarm on the xTU-R interface.
lossOfPowerAlm (8) - Value 0 means disable the loss of power
alarm on the xTU-R interface.
"
REFERENCE "Used by MAP"
::= { zxAnXdsl2AlmThreshPrfEntry 38 }
zxAnXdsl2XtucThreshInpLeftr OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The LEFTR_THRESH is a configuration parameter that is used to
derive the control parameter leftr_thresh, which specifies the
fraction of NDR that shall be used as the threshold for declaring
leftr defects.
The downstream and upstream values of LEFTR_THRESH shall be
configured in the CO-MIB.
The valid range for LEFTR_THRESH is from 0.01 to 0.99 with a
granularity of 0.01 and a special value including that ETR shall
be used as the threshold for declaring leftr detects.
The control parameter leftr_thresh shall be set to the same value
as the configuration parameter LEFTR_THRESH. The special value of
LEFTR_THRESH shall be mapped to leftr_thresh=0.
The minimum valid threshold for declaring leftr defect is ETR/2.
The receiver shall use ETR/2 in the case the threshold is
configured to a value less than ETR/2 by the operator.
"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 39 }
zxAnXdsl2XturThreshInpLeftr OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The LEFTR_THRESH is a configuration parameter that is used to
derive the control parameter leftr_thresh, which specifies the
fraction of NDR that shall be used as the threshold for declaring
leftr defects.
The downstream and upstream values of LEFTR_THRESH shall be
configured in the CO-MIB.
The valid range for LEFTR_THRESH is from 0.01 to 0.99 with a
granularity of 0.01 and a special value including that ETR shall
be used as the threshold for declaring leftr detects.
The control parameter leftr_thresh shall be set to the same value
as the configuration parameter LEFTR_THRESH. The special value of
LEFTR_THRESH shall be mapped to leftr_thresh=0.
The minimum valid threshold for declaring leftr defect is ETR/2.
The receiver shall use ETR/2 in the case the threshold is
configured to a value less than ETR/2 by the operator.
"
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 40 }
zxAnXdsl2XtucEsLossRatioThresh OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"XTU-C vectoring error sample loss ratio between
zxAnXdsl2PMLCurr1DayTxEsPkts and zxAnXdsl2PMLCurr1DayRxEsPkts.
Calculation:
Difference= 100 * (zxAnXdsl2PMLCurr1DayTxEsPkts -
zxAnXdsl2PMLCurr1DayRxEsPkts) / zxAnXdsl2PMLCurr1DayTxEsPkts
If Difference is larger than zxAnXdsl2XtucEsLossRatioThresh,
zxAnXdsl2XtucEsLossOverThreshAlm will be sent.
Value '0' means that the trap is disabled."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 41 }
zxAnXdsl2XturEsLossRatioThresh OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"XTU-R error sample loss ratio between zxAnXdsl2PMLCurr1DayTxEsPkts
and zxAnXdsl2PMLCurr1DayRxEsPkts.
Calculation:
Difference= 100 * (zxAnXdsl2PMLCurr1DayTxEsPkts -
zxAnXdsl2PMLCurr1DayRxEsPkts) / zxAnXdsl2PMLCurr1DayTxEsPkts
If Difference is larger than zxAnXdsl2XturEsLossRatioThresh,
zxAnXdsl2XturEsLossOverThreshAlm will be sent.
Value '0' means that the trap is disabled."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 42 }
zxAnXdsl2XtucThreshInpLeftrs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMChCurr15MInpLeftrs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 43 }
zxAnXdsl2XturThreshInpLeftrs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A threshold for the zxAnXdsl2PMChCurr15MInpLeftrs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter."
DEFVAL { 0 }
::= { zxAnXdsl2AlmThreshPrfEntry 44 }
--------------------------------------------------------------------------
-- zxAnXdsl2PMLineCurrTable
--------------------------------------------------------------------------
zxAnXdsl2PMLineCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2PMLineCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineCurrTable contains current Performance
Monitoring results of DSL line. "
::= { zxAnXdsl2PMLine 1 }
zxAnXdsl2PMLineCurrEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2PMLineCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineCurrTable contains current Performance
Monitoring results of DSL line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit."
AUGMENTS { xdsl2PMLineCurrEntry }
::= { zxAnXdsl2PMLineCurrTable 1 }
ZxAnXdsl2PMLineCurrEntry ::= SEQUENCE {
zxAnXdsl2PMLCurr15MLofs Counter32,
zxAnXdsl2PMLCurr15MLols Counter32,
zxAnXdsl2PMLCurr15MLprs Counter32,
zxAnXdsl2PMLCurr15MPtmCrcErrs Counter32,
zxAnXdsl2PMLCurr15MPtmCodViol Counter32,
zxAnXdsl2PMLCurr1DayLofs Counter32,
zxAnXdsl2PMLCurr1DayLols Counter32,
zxAnXdsl2PMLCurr1DayLprs Counter32,
zxAnXdsl2PMLCurr1DayPtmCrcErrs Counter32,
zxAnXdsl2PMLCurr1DayPtmCodViol Counter32,
zxAnXdsl2PMLCurr15MInmInpEq OCTET STRING,
zxAnXdsl2PMLCurr15MInmMe Counter32,
zxAnXdsl2PMLCurr15MInmIat OCTET STRING,
zxAnXdsl2PMLCurr1DayInmInpEq OCTET STRING,
zxAnXdsl2PMLCurr1DayInmMe Counter32,
zxAnXdsl2PMLCurr1DayInmIat OCTET STRING,
zxAnXdsl2PMLCurr15MSosSuccess Counter32,
zxAnXdsl2PMLCurr1DaySosSuccess Counter32,
zxAnXdsl2PMLCurr15MTxEsPkts Counter32,
zxAnXdsl2PMLCurr15MRxEsPkts Counter32,
zxAnXdsl2PMLCurr1DayTxEsPkts Counter32,
zxAnXdsl2PMLCurr1DayRxEsPkts Counter32
}
zxAnXdsl2PMLCurr15MLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF ."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 1 }
zxAnXdsl2PMLCurr15MLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 2 }
zxAnXdsl2PMLCurr15MLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 3 }
zxAnXdsl2PMLCurr15MPtmCrcErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm Crc Errors during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineCurrEntry 4 }
zxAnXdsl2PMLCurr15MPtmCodViol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm coding violations during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineCurrEntry 5 }
zxAnXdsl2PMLCurr1DayLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 6 }
zxAnXdsl2PMLCurr1DayLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 7 }
zxAnXdsl2PMLCurr1DayLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineCurrEntry 8 }
zxAnXdsl2PMLCurr1DayPtmCrcErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm Crc Errors during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineCurrEntry 9 }
zxAnXdsl2PMLCurr1DayPtmCodViol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm coding violations during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineCurrEntry 10 }
zxAnXdsl2PMLCurr15MInmInpEq OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..68))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
The integer sequence of INM INPEQ histogram 1..17.
Each parameter is a count of the INMAINPEQi anomalies occurring on
the line during the accumulation period.
Each parameter is presented with 4 octets.
Octets 0-3 -- INMAINPEQ1
Octets 4-7 -- INMAINPEQ2
Octets 8-11 -- INMAINPEQ3
...
Octets 64-67 -- INMAINPEQ17"
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.1"
::= { zxAnXdsl2PMLineCurrEntry 11 }
zxAnXdsl2PMLCurr15MInmMe OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
This parameter is a count of the INMAME anomalies occurring on the
line during the accumulation period."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.2"
::= { zxAnXdsl2PMLineCurrEntry 12 }
zxAnXdsl2PMLCurr15MInmIat OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
This parameter is a count of the INMAIATi(0-7) anomalies occurring
on the line during the accumulation period.
Each parameter is presented with 4 octets.
Octets 0-3 -- INMAIAT0
Octets 4-7 -- INMAIAT1
Octets 8-11 -- INMAIAT2
...
Octets 28-31 -- INMAIAT7"
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.3"
::= { zxAnXdsl2PMLineCurrEntry 13 }
zxAnXdsl2PMLCurr1DayInmInpEq OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..68))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
The integer sequence of INM INPEQ histogram 1..17.
Each parameter is a count of the INMAINPEQi anomalies occurring on
the line during the accumulation period.
Each parameter is presented with 4 octets.
Octets 0-3 -- INMAINPEQ1
Octets 4-7 -- INMAINPEQ2
Octets 8-11 -- INMAINPEQ3
...
Octets 64-67 -- INMAINPEQ17"
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.1"
::= { zxAnXdsl2PMLineCurrEntry 14 }
zxAnXdsl2PMLCurr1DayInmMe OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
This parameter is a count of the INMAME anomalies occurring on the
line during the accumulation period."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.2"
::= { zxAnXdsl2PMLineCurrEntry 15 }
zxAnXdsl2PMLCurr1DayInmIat OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
This parameter is a count of the INMAIATi(0-7) anomalies occurring
on the line during the accumulation period.
Each parameter is presented with 4 octets.
Octets 0-3 -- INMAIAT0
Octets 4-7 -- INMAIAT1
Octets 8-11 -- INMAIAT2
...
Octets 28-31 -- INMAIAT7"
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.3"
::= { zxAnXdsl2PMLineCurrEntry 16 }
zxAnXdsl2PMLCurr15MSosSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is a count of the total number of successful SOS
procedures initiated on the line during the accumulation period.
Parameter procedures shall be as defined in 7.2.7."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.6.1"
::= { zxAnXdsl2PMLineCurrEntry 17 }
zxAnXdsl2PMLCurr1DaySosSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is a count of the total number of successful SOS
procedures initiated on the line during the accumulation period.
Parameter procedures shall be as defined in 7.2.7."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.6.1"
::= { zxAnXdsl2PMLineCurrEntry 18 }
zxAnXdsl2PMLCurr15MTxEsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted erorr sample packets during 15 minutes."
::= { zxAnXdsl2PMLineCurrEntry 27 }
zxAnXdsl2PMLCurr15MRxEsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received erorr sample packets during 15 minutes."
::= { zxAnXdsl2PMLineCurrEntry 28 }
zxAnXdsl2PMLCurr1DayTxEsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted erorr sample packets during 1 day."
::= { zxAnXdsl2PMLineCurrEntry 29 }
zxAnXdsl2PMLCurr1DayRxEsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received erorr sample packets during 1 day."
::= { zxAnXdsl2PMLineCurrEntry 30 }
--------------------------------------------------------------------------
-- zxAnXdsl2PMLineHist15MinTable
--------------------------------------------------------------------------
zxAnXdsl2PMLineHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineHist15MinTable contains history Performance
Monitoring results for 15min of DSL line. "
::= { zxAnXdsl2PMLine 2 }
zxAnXdsl2PMLineHist15MinEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineHist15MinTable contains history Performance
Monitoring results for 15min of DSL line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit."
AUGMENTS { xdsl2PMLineHist15MinEntry }
::= { zxAnXdsl2PMLineHist15MinTable 1 }
ZxAnXdsl2PMLineHist15MinEntry ::=
SEQUENCE {
zxAnXdsl2PMLHist15MMonitoredTime Unsigned32,
zxAnXdsl2PMLHist15MLofs Counter32,
zxAnXdsl2PMLHist15MLols Counter32,
zxAnXdsl2PMLHist15MLprs Counter32,
zxAnXdsl2PMLHist15MPtmCrcErrs Counter32,
zxAnXdsl2PMLHist15MPtmCodViol Counter32,
zxAnXdsl2PMLHist15MValidInterval TruthValue,
zxAnXdsl2PMLHist15MInmInpEq OCTET STRING,
zxAnXdsl2PMLHist15MInmMe Counter32,
zxAnXdsl2PMLHist15MInmIat OCTET STRING,
zxAnXdsl2PMLHist15MSosSuccess Counter32,
zxAnXdsl2PMLHist15MTxEsPkts Counter32,
zxAnXdsl2PMLHist15MRxEsPkts Counter32
}
zxAnXdsl2PMLHist15MMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { zxAnXdsl2PMLineHist15MinEntry 1 }
zxAnXdsl2PMLHist15MLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF ."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist15MinEntry 2 }
zxAnXdsl2PMLHist15MLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist15MinEntry 3 }
zxAnXdsl2PMLHist15MLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist15MinEntry 4 }
zxAnXdsl2PMLHist15MPtmCrcErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm Crc Errors during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineHist15MinEntry 5 }
zxAnXdsl2PMLHist15MPtmCodViol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm coding violations during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineHist15MinEntry 6 }
zxAnXdsl2PMLHist15MValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { zxAnXdsl2PMLineHist15MinEntry 7 }
zxAnXdsl2PMLHist15MInmInpEq OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..68))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
The integer sequence of INM INPEQ histogram 1..17.
Each parameter is a count of the INMAINPEQi anomalies occurring on
the line during the accumulation period.
Each parameter is presented with 4 octets.
Octets 0-3 -- INMAINPEQ1
Octets 4-7 -- INMAINPEQ2
Octets 8-11 -- INMAINPEQ3
...
Octets 64-67 -- INMAINPEQ17"
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.1"
::= { zxAnXdsl2PMLineHist15MinEntry 8 }
zxAnXdsl2PMLHist15MInmMe OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
This parameter is a count of the INMAME anomalies occurring on the
line during the accumulation period."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.2"
::= { zxAnXdsl2PMLineHist15MinEntry 9 }
zxAnXdsl2PMLHist15MInmIat OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
This parameter is a count of the INMAIATi(0-7) anomalies occurring
on the line during the accumulation period.
Each parameter is presented with 4 octets.
Octets 0-3 -- INMAIAT0
Octets 4-7 -- INMAIAT1
Octets 8-11 -- INMAIAT2
...
Octets 28-31 -- INMAIAT7"
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.3"
::= { zxAnXdsl2PMLineHist15MinEntry 10 }
zxAnXdsl2PMLHist15MSosSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is a count of the total number of successful SOS
procedures initiated on the line during the accumulation period.
Parameter procedures shall be as defined in 7.2.7."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.6.1"
::= { zxAnXdsl2PMLineHist15MinEntry 11 }
zxAnXdsl2PMLHist15MTxEsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted error sample packets during 15 minutes."
::= { zxAnXdsl2PMLineHist15MinEntry 16 }
zxAnXdsl2PMLHist15MRxEsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received error sample packets during 15 minutes."
::= { zxAnXdsl2PMLineHist15MinEntry 17 }
--------------------------------------------------------------------------
-- zxAnXdsl2PMLineHist1DayTable
--------------------------------------------------------------------------
zxAnXdsl2PMLineHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineHist1DayTable contains history Performance
Monitoring results for 1 Day of DSL line. "
::= { zxAnXdsl2PMLine 3 }
zxAnXdsl2PMLineHist1DayEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMLineHist1DayTable contains history Performance
Monitoring results for 1Day of DSL line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit."
AUGMENTS { xdsl2PMLineHist1DayEntry }
::= { zxAnXdsl2PMLineHist1DayTable 1 }
ZxAnXdsl2PMLineHist1DayEntry ::=
SEQUENCE {
zxAnXdsl2PMLHist1DayMonitoredTime Unsigned32,
zxAnXdsl2PMLHist1DayLofs Counter32,
zxAnXdsl2PMLHist1DayLols Counter32,
zxAnXdsl2PMLHist1DayLprs Counter32,
zxAnXdsl2PMLHist1DayPtmCrcErrs Counter32,
zxAnXdsl2PMLHist1DayPtmCodViol Counter32,
zxAnXdsl2PMLHist1DayValidInterval TruthValue,
zxAnXdsl2PMLHist1DayInmInpEq OCTET STRING,
zxAnXdsl2PMLHist1DayInmMe Counter32,
zxAnXdsl2PMLHist1DayInmIat OCTET STRING,
zxAnXdsl2PMLHist1DaySosSuccess Counter32,
zxAnXdsl2PMLHist1DayEsPkts Counter32,
zxAnXdsl2PMLHist1DayEsPkts Counter32
}
zxAnXdsl2PMLHist1DayMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total seconds monitored in this interval."
::= { zxAnXdsl2PMLineHist1DayEntry 1 }
zxAnXdsl2PMLHist1DayLofs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOF ."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist1DayEntry 2 }
zxAnXdsl2PMLHist1DayLols OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LOL."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist1DayEntry 3 }
zxAnXdsl2PMLHist1DayLprs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds during this interval that there was LPR."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1"
::= { zxAnXdsl2PMLineHist1DayEntry 4 }
zxAnXdsl2PMLHist1DayPtmCrcErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm Crc Errors during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineHist1DayEntry 5 }
zxAnXdsl2PMLHist1DayPtmCodViol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of occurrences of Ptm coding violations during
this interval."
REFERENCE "ITU-T G.997.1, paragraph #7.2.5"
::= { zxAnXdsl2PMLineHist1DayEntry 6 }
zxAnXdsl2PMLHist1DayValidInterval OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval is
valid."
::= { zxAnXdsl2PMLineHist1DayEntry 7 }
zxAnXdsl2PMLHist1DayInmInpEq OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..68))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
The integer sequence of INM INPEQ histogram 1..17.
Each parameter is a count of the INMAINPEQi anomalies occurring on
the line during the accumulation period.
Each parameter is presented with 4 octets.
Octets 0-3 -- INMAINPEQ1
Octets 4-7 -- INMAINPEQ2
Octets 8-11 -- INMAINPEQ3
...
Octets 64-67 -- INMAINPEQ17"
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.1"
::= { zxAnXdsl2PMLineHist1DayEntry 8 }
zxAnXdsl2PMLHist1DayInmMe OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
This parameter is a count of the INMAME anomalies occurring on the
line during the accumulation period."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.2"
::= { zxAnXdsl2PMLineHist1DayEntry 9 }
zxAnXdsl2PMLHist1DayInmIat OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"INM parameters.
This parameter is a count of the INMAIATi(0-7) anomalies occurring
on the line during the accumulation period.
Each parameter is presented with 4 octets.
Octets 0-3 -- INMAIAT0
Octets 4-7 -- INMAIAT1
Octets 8-11 -- INMAIAT2
...
Octets 28-31 -- INMAIAT7"
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.4.3"
::= { zxAnXdsl2PMLineHist1DayEntry 10 }
zxAnXdsl2PMLHist1DaySosSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is a count of the total number of successful SOS
procedures initiated on the line during the accumulation period.
Parameter procedures shall be as defined in 7.2.7."
REFERENCE "ITU-T G.997.1, paragraph #7.2.1.6.1"
::= { zxAnXdsl2PMLineHist1DayEntry 11 }
zxAnXdsl2PMLHist1DayTxEsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted error sample packets during 1 day."
::= { zxAnXdsl2PMLineHist1DayEntry 16 }
zxAnXdsl2PMLHist1DayRxEsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received error sample packets during 1 day."
::= { zxAnXdsl2PMLineHist1DayEntry 17 }
--------------------------------------------------------------------------
-- zxAnXdsl2PMChCurrTable
--------------------------------------------------------------------------
zxAnXdsl2PMChCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2PMChCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMChCurrTable contains current Performance
Monitoring results of DSL Channel. "
::= { zxAnXdsl2PMChannel 1 }
zxAnXdsl2PMChCurrEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2PMChCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMChCurrTable contains current Performance
Monitoring results of DSL Channel.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit."
AUGMENTS { xdsl2PMChCurrEntry }
::= { zxAnXdsl2PMChCurrTable 1 }
ZxAnXdsl2PMChCurrEntry ::=
SEQUENCE {
zxAnXdsl2PMChCurr15MRtxDtu Counter32,
zxAnXdsl2PMChCurr15MRtxCDtu Counter32,
zxAnXdsl2PMChCurr15MRtxUcDtu Counter32,
zxAnXdsl2PMChCurr15MInpLeftrs Counter32,
zxAnXdsl2PMChCurr15MInpEfb Counter32,
zxAnXdsl2PMChCurr15MInpMinEftr Counter32,
zxAnXdsl2PMChCurr1DayRtxDtu Counter32,
zxAnXdsl2PMChCurr1DayRtxCDtu Counter32,
zxAnXdsl2PMChCurr1DayRtxUcDtu Counter32,
zxAnXdsl2PMChCurr1DayInpLeftrs Counter32,
zxAnXdsl2PMChCurr1DayInpEfb Counter32,
zxAnXdsl2PMChCurr1DayInpMinEftr Counter32,
zxAnXdsl2PMChCurrTransmittedBlks Counter32,
zxAnXdsl2PMChCurrOverflowBlks Counter32,
zxAnXdsl2PMChCurrErroredBlks Counter32
}
zxAnXdsl2PMChCurr15MRtxDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter in the current 15 minute
interval. Multiple retransmission of the same DTU is counted
as many times as it has been retransmitted.
"
::= { zxAnXdsl2PMChCurrEntry 1 }
zxAnXdsl2PMChCurr15MRtxCDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission in the current 15 minute interval"
::= { zxAnXdsl2PMChCurrEntry 2 }
zxAnXdsl2PMChCurr15MRtxUcDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission in the
current 15 minute interval."
::= { zxAnXdsl2PMChCurrEntry 3 }
zxAnXdsl2PMChCurr15MInpLeftrs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter of seconds with a 'leftr' defect present.
It is a 32-bit wrap-around counter. The counter shall be reset at
power-on. The counters shall not be reset with a link state
transition and shall not be reset when read."
REFERENCE "ITU-T G.998.4, paragraph #11.4.1"
::= { zxAnXdsl2PMChCurrEntry 4 }
zxAnXdsl2PMChCurr15MInpEfb OBJECT-TYPE
SYNTAX Counter32
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter counting the number of error-free bits passed
over the beta1-reference point, deivided by 2^16. Error-free bits
are bits originating from DTU's that have been detected to contain
on error at the moment of crossing the beta1-reference point.
It is a 32-bit wrap-around counter. The counter shall be reset at
power-on. The counters shall not be reset with a link state
transition and shall not be reset when read."
REFERENCE "ITU-T G.998.4, paragraph #11.4.2"
::= { zxAnXdsl2PMChCurrEntry 5 }
zxAnXdsl2PMChCurr15MInpMinEftr OBJECT-TYPE
SYNTAX Counter32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance monitoring parameter minimum error-free
throughput(EFTR_min) is defined as the minimum of the EFTR
observed since the last reading of the EFTR_min via an EOC command
over the U-interface.
The EFTR_min shall be measured in Showtime by the receiver.
The valid values are all integers from 0 to the maximum of the
valid values of the maximum net data rate specified in the
associated Recommendation values.
The performance monitoring parameter EFTR_min shall be represented
as a 32-bit unsigned integer expressing the value of EFTR_min in
kbps This data format supports a granularity of 1 kbps.
The previous value of EFTR_min shall be reported in the EOC if no
EFTR measurement has been done since the last reading of EFTR_min."
REFERENCE "ITU-T G.998.4, paragraph #11.4.3"
::= { zxAnXdsl2PMChCurrEntry 6 }
zxAnXdsl2PMChCurr1DayRtxDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU has been
retransmitted by the transmitter in the current day interval.
Multiple retransmission of the same DTU is counted as many times
as it has been retransmitted.
"
::= { zxAnXdsl2PMChCurrEntry 51 }
zxAnXdsl2PMChCurr1DayRtxCDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission in the current day interval"
::= { zxAnXdsl2PMChCurrEntry 52 }
zxAnXdsl2PMChCurr1DayRtxUcDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission."
::= { zxAnXdsl2PMChCurrEntry 53 }
zxAnXdsl2PMChCurr1DayInpLeftrs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter of seconds with a 'leftr' defect present.
It is a 32-bit wrap-around counter. The counter shall be reset at
power-on. The counters shall not be reset with a link state
transition and shall not be reset when read."
REFERENCE "ITU-T G.998.4, paragraph #11.4.1"
::= { zxAnXdsl2PMChCurrEntry 54 }
zxAnXdsl2PMChCurr1DayInpEfb OBJECT-TYPE
SYNTAX Counter32
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter counting the number of error-free bits passed
over the beta1-reference point, deivided by 2^16. Error-free bits
are bits originating from DTU's that have been detected to contain
on error at the moment of crossing the beta1-reference point.
It is a 32-bit wrap-around counter. The counter shall be reset at
power-on. The counters shall not be reset with a link state
transition and shall not be reset when read."
REFERENCE "ITU-T G.998.4, paragraph #11.4.2"
::= { zxAnXdsl2PMChCurrEntry 55 }
zxAnXdsl2PMChCurr1DayInpMinEftr OBJECT-TYPE
SYNTAX Counter32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance monitoring parameter minimum error-free
throughput(EFTR_min) is defined as the minimum of the EFTR
observed since the last reading of the EFTR_min via an EOC command
over the U-interface.
The EFTR_min shall be measured in Showtime by the receiver.
The valid values are all integers from 0 to the maximum of the
valid values of the maximum net data rate specified in the
associated Recommendation values.
The performance monitoring parameter EFTR_min shall be represented
as a 32-bit unsigned integer expressing the value of EFTR_min in
kbps This data format supports a granularity of 1 kbps.
The previous value of EFTR_min shall be reported in the EOC if no
EFTR measurement has been done since the last reading of EFTR_min."
REFERENCE "ITU-T G.998.4, paragraph #11.4.3"
::= { zxAnXdsl2PMChCurrEntry 56 }
zxAnXdsl2PMChCurrTransmittedBlks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of blocks transmitted since last reset.
This parameter represents ATM cells for ATM mode, and
PTM packets for PTM mode.
"
::= { zxAnXdsl2PMChCurrEntry 101 }
zxAnXdsl2PMChCurrOverflowBlks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of overflow blocks since last reset.
This parameter represents ATM cells for ATM mode, and
PTM packets for PTM mode.
"
::= { zxAnXdsl2PMChCurrEntry 102 }
zxAnXdsl2PMChCurrErroredBlks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of errored blocks since last reset.
This parameter represents ATM cells for ATM mode, and
PTM packets for PTM mode.
"
::= { zxAnXdsl2PMChCurrEntry 103 }
--------------------------------------------------------------------------
-- zxAnXdsl2PMChHist15MinTable
--------------------------------------------------------------------------
zxAnXdsl2PMChHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2PMChHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMChHist15MinTable contains history Performance
Monitoring results for 15min of DSL channel. "
::= { zxAnXdsl2PMChannel 2 }
zxAnXdsl2PMChHist15MinEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2PMChHist15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMChHist15MinTable contains history Performance
Monitoring results for 15min of DSL channel.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit."
AUGMENTS { xdsl2PMChHist15MinEntry }
::= { zxAnXdsl2PMChHist15MinTable 1 }
ZxAnXdsl2PMChHist15MinEntry ::=
SEQUENCE {
zxAnXdsl2PMChHist15MRtxDtu Counter32,
zxAnXdsl2PMChHist15MRtxCDtu Counter32,
zxAnXdsl2PMChHist15MRtxUcDtu Counter32,
zxAnXdsl2PMChHist15MInpLeftrs Counter32,
zxAnXdsl2PMChHist15MInpEfb Counter32,
zxAnXdsl2PMChHist15MInpMinEftr Counter32
}
zxAnXdsl2PMChHist15MRtxDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU has been
retransmitted by the transmitter during this interval. Multiple
retransmission of the same DTU is counted as many times as it has
been retransmitted.
"
::= { zxAnXdsl2PMChHist15MinEntry 1 }
zxAnXdsl2PMChHist15MRtxCDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission during this interval."
::= { zxAnXdsl2PMChHist15MinEntry 2 }
zxAnXdsl2PMChHist15MRtxUcDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission. during
this interval."
::= { zxAnXdsl2PMChHist15MinEntry 3 }
zxAnXdsl2PMChHist15MInpLeftrs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter of seconds with a 'leftr' defect present.
It is a 32-bit wrap-around counter. The counter shall be reset at
power-on. The counters shall not be reset with a link state
transition and shall not be reset when read."
REFERENCE "ITU-T G.998.4, paragraph #11.4.1"
::= { zxAnXdsl2PMChHist15MinEntry 4 }
zxAnXdsl2PMChHist15MInpEfb OBJECT-TYPE
SYNTAX Counter32
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter counting the number of error-free bits passed
over the beta1-reference point, deivided by 2^16. Error-free bits
are bits originating from DTU's that have been detected to contain
on error at the moment of crossing the beta1-reference point.
It is a 32-bit wrap-around counter. The counter shall be reset at
power-on. The counters shall not be reset with a link state
transition and shall not be reset when read."
REFERENCE "ITU-T G.998.4, paragraph #11.4.2"
::= { zxAnXdsl2PMChHist15MinEntry 5 }
zxAnXdsl2PMChHist15MInpMinEftr OBJECT-TYPE
SYNTAX Counter32
UNITS "kpbs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance monitoring parameter minimum error-free
throughput(EFTR_min) is defined as the minimum of the EFTR
observed since the last reading of the EFTR_min via an EOC command
over the U-interface.
The EFTR_min shall be measured in Showtime by the receiver.
The valid values are all integers from 0 to the maximum of the
valid values of the maximum net data rate specified in the
associated Recommendation values.
The performance monitoring parameter EFTR_min shall be represented
as a 32-bit unsigned integer expressing the value of EFTR_min in
kbps This data format supports a granularity of 1 kbps.
The previous value of EFTR_min shall be reported in the EOC if no
EFTR measurement has been done since the last reading of EFTR_min."
REFERENCE "ITU-T G.998.4, paragraph #11.4.3"
::= { zxAnXdsl2PMChHist15MinEntry 6 }
--------------------------------------------------------------------------
-- zxAnXdsl2PMChHist1DayTable
--------------------------------------------------------------------------
zxAnXdsl2PMChHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2PMChHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMChHist1DayTable contains history Performance
Monitoring results for 1 Day of DSL channel. "
::= { zxAnXdsl2PMChannel 3 }
zxAnXdsl2PMChHist1DayEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2PMChHist1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2PMChHist1DayTable contains history Performance
Monitoring results for 1Day of DSL channel.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit."
AUGMENTS { xdsl2PMChHist1DEntry }
::= { zxAnXdsl2PMChHist1DayTable 1 }
ZxAnXdsl2PMChHist1DayEntry ::=
SEQUENCE {
zxAnXdsl2PMChHist1DayRtxDtu Counter32,
zxAnXdsl2PMChHist1DayRtxCDtu Counter32,
zxAnXdsl2PMChHist1DayRtxUcDtu Counter32,
zxAnXdsl2PMChHist1DayInpLeftrs Counter32,
zxAnXdsl2PMChHist1DayInpEfb Counter32,
zxAnXdsl2PMChHist1DayInpMinEftr Counter32
}
zxAnXdsl2PMChHist1DayRtxDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU has been
retransmitted by the transmitter during this interval. Multiple
retransmission of the same DTU is counted as many times as it
has been retransmitted."
::= { zxAnXdsl2PMChHist1DayEntry 1 }
zxAnXdsl2PMChHist1DayRtxCDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission during this interval."
::= { zxAnXdsl2PMChHist1DayEntry 2 }
zxAnXdsl2PMChHist1DayRtxUcDtu OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission during
this interval."
::= { zxAnXdsl2PMChHist1DayEntry 3 }
zxAnXdsl2PMChHist1DayInpLeftrs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter of seconds with a 'leftr' defect present.
It is a 32-bit wrap-around counter. The counter shall be reset at
power-on. The counters shall not be reset with a link state
transition and shall not be reset when read."
REFERENCE "ITU-T G.998.4, paragraph #11.4.1"
::= { zxAnXdsl2PMChHist1DayEntry 4 }
zxAnXdsl2PMChHist1DayInpEfb OBJECT-TYPE
SYNTAX Counter32
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a counter counting the number of error-free bits passed
over the beta1-reference point, deivided by 2^16. Error-free bits
are bits originating from DTU's that have been detected to contain
on error at the moment of crossing the beta1-reference point.
It is a 32-bit wrap-around counter. The counter shall be reset at
power-on. The counters shall not be reset with a link state
transition and shall not be reset when read."
REFERENCE "ITU-T G.998.4, paragraph #11.4.2"
::= { zxAnXdsl2PMChHist1DayEntry 5 }
zxAnXdsl2PMChHist1DayInpMinEftr OBJECT-TYPE
SYNTAX Counter32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The performance monitoring parameter minimum error-free
throughput(EFTR_min) is defined as the minimum of the EFTR
observed since the last reading of the EFTR_min via an EOC command
over the U-interface.
The EFTR_min shall be measured in Showtime by the receiver.
The valid values are all integers from 0 to the maximum of the
valid values of the maximum net data rate specified in the
associated Recommendation values.
The performance monitoring parameter EFTR_min shall be represented
as a 32-bit unsigned integer expressing the value of EFTR_min in
kbps This data format supports a granularity of 1 kbps.
The previous value of EFTR_min shall be reported in the EOC if no
EFTR measurement has been done since the last reading of EFTR_min."
REFERENCE "ITU-T G.998.4, paragraph #11.4.3"
::= { zxAnXdsl2PMChHist1DayEntry 6 }
--------------------------------------------------------------------------
-- zxAnXdsl2SeltConfTable
--------------------------------------------------------------------------
zxAnXdsl2SeltConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2SeltConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2SeltConfTable contains configuration parameters
for SELT test. "
::= { zxAnXdsl2LineTest 1 }
zxAnXdsl2SeltConfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2SeltConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of zxAnXdsl2SeltConfTable."
INDEX { ifIndex }
::= { zxAnXdsl2SeltConfTable 1 }
ZxAnXdsl2SeltConfEntry ::=
SEQUENCE {
zxAnXdsl2LnSeltCmndConfLdsf Xdsl2LineLdsf,
zxAnXdsl2SeltUerMmd Unsigned32,
zxAnXdsl2SeltQlnMmd Unsigned32,
zxAnXdsl2SeltCece TruthValue,
zxAnXdsl2SeltCapSignalPsdDs OCTET STRING,
zxAnXdsl2SeltCapSignalPsdUs OCTET STRING,
zxAnXdsl2SeltCapNoisePsdDs OCTET STRING,
zxAnXdsl2SeltCapNoisePsdUs OCTET STRING,
zxAnXdsl2SeltCapTargetSnrmDs Unsigned32,
zxAnXdsl2SeltCapTargetSnrmUs Unsigned32,
zxAnXdsl2SeltUerMeasureEnableC Integer32,
zxAnXdsl2SeltQlnMeasureEnableC Integer32,
zxAnXdsl2SeltCalibrateCmd Xdsl2LineLdsf,
zxAnXdsl2SeltRawDataCmd Xdsl2LineLdsf,
zxAnXdsl2SeltQuickTestEnable INTEGER
}
zxAnXdsl2LnSeltCmndConfLdsf OBJECT-TYPE
SYNTAX Xdsl2LineLdsf
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Command:Loop diagnostics mode forced (LDSF). Defines whether the
line should be forced into the loop diagnostics mode by the
near-end xTU on this line or only be responsive to loop
diagnostics initiated by the far-end xTU.
This object MUST be maintained in a persistent manner.
However, in case the operator forces loop diagnostics mode
then the access node should reset the object (inhibit) when
loop diagnostics mode procedures are completed."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.8"
DEFVAL { inhibit }
::= { zxAnXdsl2SeltConfEntry 1 }
zxAnXdsl2SeltUerMmd OBJECT-TYPE
SYNTAX Unsigned32(5..240)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SELT UER Maximum Measurement Duration.
This parameter is the maximum allowed time for SELT Uncalibrated
Echo Response measurement, between the time of the start command
written by the SELT-PMD-ME, and the time the result is available
for read operation by SELT-PMD-ME."
::= { zxAnXdsl2SeltConfEntry 2 }
zxAnXdsl2SeltQlnMmd OBJECT-TYPE
SYNTAX Unsigned32(1..240)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SELT Quiet Line Noise Maximum Measurement Duration.
This parameter is the maximum allowed time for SELT quiet line
noise measurement, between the time of the start command
written by the SELT-PMD-ME, and the time the result is
available for read operation by SELT-PMD-ME."
::= { zxAnXdsl2SeltConfEntry 3 }
zxAnXdsl2SeltCece OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Capacity Estimate Calculation Enabling.
This parameter specifies if the SELT-P function shall perform the
Downstream capacity and Upstream capacity estimation, if supported."
::= { zxAnXdsl2SeltConfEntry 4 }
zxAnXdsl2SeltCapSignalPsdDs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..192))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Capacity Estimate Signal PSD Downstream.
This configuration parameter defines the PSD template of the
transmit signal to be used in capacity estimate evaluation.
The parameter shall be a set of breakpoints that are represented
by [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)], each breakpoint
occupies 4 octets and consist of a frequency index tn(2 bytes) and
a signal PSD level(2 bytes).
The range of valid values for index tn is 0 to 8191, and the range
of valid values for PSD is 300 to 2000(units of -0.1dBm/Hz).
The maximum number of breakpoints is 48."
::= { zxAnXdsl2SeltConfEntry 5 }
zxAnXdsl2SeltCapSignalPsdUs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..192))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Capacity Estimate Signal PSD Upstream.
This configuration parameter defines the PSD template of the
transmit signal to be used in capacity estimate evaluation.
The parameter shall be a set of breakpoints that are represented
by [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)], each breakpoint
occupies 4 octets and consist of a frequency index tn(2 bytes) and
a signal PSD level(2 bytes).
The range of valid values for index tn is 0 to 8191, and the range
of valid values for PSD is 300 to 2000(units of -0.1dBm/Hz).
The maximum number of breakpoints is 48."
::= { zxAnXdsl2SeltConfEntry 6 }
zxAnXdsl2SeltCapNoisePsdDs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Capacity Estimate Noise PSD Downstream.
This configuration parameter defines the PSD template of the
transmit signal to be used in capacity estimate evaluation.
The parameter shall be a set of breakpoints that are represented
by [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)], each breakpoint
occupies 4 octets and consist of a frequency index tn(2 bytes) and
a signal PSD level(2 bytes).
The range of valid values for index tn is 0 to 8191, and the range
of valid values for PSD is 300 to 2000(units of -0.1dBm/Hz).
The maximum number of breakpoints is 128."
::= { zxAnXdsl2SeltConfEntry 7 }
zxAnXdsl2SeltCapNoisePsdUs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Capacity Estimate Noise PSD Upstream.
This configuration parameter defines the PSD template of the
transmit signal to be used in capacity estimate evaluation.
The parameter shall be a set of breakpoints that are represented
by [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)], each breakpoint
occupies 4 octets and consist of a frequency index tn(2 bytes) and
a signal PSD level(2 bytes).
The range of valid values for index tn is 0 to 8191, and the range
of valid values for PSD is 300 to 2000(units of -0.1dBm/Hz).
The maximum number of breakpoints is 128."
::= { zxAnXdsl2SeltConfEntry 8 }
zxAnXdsl2SeltCapTargetSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Capacity Estimate Target Noise Margin Downstream.
This is the Noise Margin to be used in capacity estimate evaluation,
relative to a BER requirement of 1E-7."
::= { zxAnXdsl2SeltConfEntry 9 }
zxAnXdsl2SeltCapTargetSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310)
UNITS "0.1dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Capacity Estimate Target Noise Margin Upstream.
This is the Noise Margin to be used in capacity estimate evaluation,
relative to a BER requirement of 1E-7."
::= { zxAnXdsl2SeltConfEntry 10 }
zxAnXdsl2SeltUerMeasureEnableC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is a binary variable, where '1' triggers the CO
SELT PMD to start a UER measurement."
REFERENCE "ITU-T G.996.2, paragraph #A2.3.1"
::= { zxAnXdsl2SeltConfEntry 11 }
zxAnXdsl2SeltQlnMeasureEnableC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter is a binary variable, where '1' triggers the CO
SELT PMD to start a QLN measurement."
REFERENCE "ITU-T G.996.2, paragraph #A2.3.2"
::= { zxAnXdsl2SeltConfEntry 12 }
zxAnXdsl2SeltCalibrateCmd OBJECT-TYPE
SYNTAX Xdsl2LineLdsf
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Execute this command to calibrate the parameter that is used to
calculate the SELT result.
When execute this command before SELT, the test result will be
more accurate."
DEFVAL { inhibit }
::= { zxAnXdsl2SeltConfEntry 13 }
zxAnXdsl2SeltRawDataCmd OBJECT-TYPE
SYNTAX Xdsl2LineLdsf
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines whether the line should be forced into SELT raw data
test mode."
DEFVAL { inhibit }
::= { zxAnXdsl2SeltConfEntry 14 }
zxAnXdsl2SeltQuickTestEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the quick SELT test.
enabled(1) - Start the SELT test with quick mode.
disabled(2) - Start the SELT test with normal mode."
DEFVAL { disabled }
::= { zxAnXdsl2SeltConfEntry 15 }
--------------------------------------------------------------------------
-- zxAnXdsl2SeltLineStatusTable
--------------------------------------------------------------------------
zxAnXdsl2SeltLineStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2SeltLineStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2SeltLineStatusTable contains line status result
of SELT test. "
::= { zxAnXdsl2LineTest 2 }
zxAnXdsl2SeltLineStatusEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2SeltLineStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of zxAnXdsl2SeltLineStatusTable."
INDEX { ifIndex }
::= { zxAnXdsl2SeltLineStatusTable 1 }
ZxAnXdsl2SeltLineStatusEntry ::=
SEQUENCE {
zxAnXdsl2SeltLoopTermStatus INTEGER,
zxAnXdsl2SeltLoopLength Unsigned32,
zxAnXdsl2SeltLoopTopology OCTET STRING,
zxAnXdsl2SeltSplitterMissing TruthValue,
zxAnXdsl2SeltLineAtten OCTET STRING,
zxAnXdsl2SeltCapacityDs Unsigned32,
zxAnXdsl2SeltCapacityUs Unsigned32,
zxAnXdsl2SeltUerScale Unsigned32,
zxAnXdsl2SeltCerScale Unsigned32,
zxAnXdsl2SeltTestStatus INTEGER,
zxAnXdsl2SeltCapabilities BITS,
zxAnXdsl2SeltChipsetType INTEGER
}
zxAnXdsl2SeltLoopTermStatus OBJECT-TYPE
SYNTAX INTEGER {
open(1),
short(2),
poweredOnCPE(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loop Termination Indicator is a state indication of the
loop termination."
::= { zxAnXdsl2SeltLineStatusEntry 1 }
zxAnXdsl2SeltLoopLength OBJECT-TYPE
SYNTAX Unsigned32(0..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is the physical length (in meters) of the loop
between the U-C and the U-R interface.
The loop length shall be measured with a granularity of 1 m,
with valid range of 0 to 16383 m."
::= { zxAnXdsl2SeltLineStatusEntry 2 }
zxAnXdsl2SeltLoopTopology OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Loop Topology without cable-type identification is consists of
a list of segments that are represented by (len1,gauge1,term1,bt1),
(len2,gauge2,term2,bt2)...(lenN,gaugen,termn,btN).
Each segment occupies 5 octets in the following structure:
Octets 0&1 -- Loop Segment Length
Octets 2 -- Loop Segment Gauge.
Octets 3 -- Loop Segment Termination Type.
Octets 4 -- Loop Segment Bridged Tap Indicator.
The range of valid values for length is 0 to 16383.
The valid value for gauge is 1(PE04),2(PE05),3(Unknown).
The valid value for termination type is 1(open),2(short),3(balanced),
4(unknown).
The valid value for indicator is 1(bridged tap, branching) or
2(not a bridged tap, in series).
The maximum number of segments is 16."
::= { zxAnXdsl2SeltLineStatusEntry 3 }
zxAnXdsl2SeltSplitterMissing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter is a indication of a missing or incorrectly
installed splitter or micro-filter at the U-R reference point.
The value of true means missing splitter or micro-filter."
::= { zxAnXdsl2SeltLineStatusEntry 4 }
zxAnXdsl2SeltLineAtten OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16384))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The line attenuation TFlog(f) is the logarithmic power transfer
function of the line as a function of frequency when both the
near-end and far-end line terminations have the following values:
Source impedance = purely resistive equal to 100 Ohm.
Termination impedance = purely resistive equal to 100 Ohm.
The function TFlog(f) consists of an array of values TFlog(i X Df),
with Df = 4.3125 kHz independent of the sub-carrier spacing used
for the XDSL DMT modulation.
This parameter shall be a set of breakpoints that are represented
by [(t1, TFlog1), (t2, TFlog2), ..., (tN, TFlogN, each breakpoint
occupies 4 octets and consist of a index tn(2 bytes) and a TFlog
value(2 bytes).
The range of valid values for the index i is 0 to 8191.
The range of valid values for TFlog(i X Df) is from 60 down to
-962(units of 0.1 dB), so those two bytes are signed value.
0x0FFFFF is used to indicate that no measurement could be done
for this subcarrier because the attenuation is out of range
that can be represented."
::= { zxAnXdsl2SeltLineStatusEntry 5 }
zxAnXdsl2SeltCapacityDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter represents a best-effort estimate of the achievable
downstream data rate (in kbit/s) on the loop under test."
::= { zxAnXdsl2SeltLineStatusEntry 6 }
zxAnXdsl2SeltCapacityUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000)
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter represents a best-effort estimate of the achievable
upstream data rate (in kbit/s) on the loop under test."
::= { zxAnXdsl2SeltLineStatusEntry 7 }
zxAnXdsl2SeltUerScale OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The scale factor for SELT Uncalibrated Echo Response, it shall be
coded as a 32 bit unsigned integer."
::= { zxAnXdsl2SeltLineStatusEntry 8 }
zxAnXdsl2SeltCerScale OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The scale factor for SELT Calibrated Echo Response, it shall be
coded as a 32 bit unsigned integer."
::= { zxAnXdsl2SeltLineStatusEntry 9 }
zxAnXdsl2SeltTestStatus OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
success(2),
inProgress(3),
unsupported(4),
cannotRun(5),
aborted(6),
failed(7),
illegalMode(8),
noResources(9),
online(10),
parallelOverLimit(11),
showtime(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Possible failure reasons associated with performing Single Ended
Loop Test (SELT) on a DSL line.
Possible values are:
none (1) - The default value in case LDSF was never
requested for the associated line.
success (2) - The recent command completed
successfully.
inProgress (3) - The Loop Diagnostics process is in
progress.
unsupported (4) - The NE or the line card doesn't support
LDSF.
cannotRun (5) - The NE cannot initiate the command, due
to a non specific reason.
aborted (6) - The Loop Diagnostics process aborted.
failed (7) - The Loop Diagnostics process failed.
illegalMode (8) - The NE cannot initiate the command, due
to the specific mode of the relevant
line.
noResources (9) - The NE cannot initiate the command, due
to lack of internal memory resources.
online (10)- The CPE is online but not in showtime status.
parallelOverLimit (11)- The number of parallel tests has reached
the upper limit.
showtime (12)- The CPE is in showtime status."
::= { zxAnXdsl2SeltLineStatusEntry 10 }
zxAnXdsl2SeltCapabilities OBJECT-TYPE
SYNTAX BITS
{
supportRawDataTest(0),
supportCalibrate(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management capabilities of VDSL card.
bit 0: value 1 means support zxAnXdsl2SeltRawDataCmd.
bit 1: value 1 means support zxAnXdsl2SeltCalibrateCmd."
::= { zxAnXdsl2SeltLineStatusEntry 11 }
zxAnXdsl2SeltChipsetType OBJECT-TYPE
SYNTAX INTEGER
{
lantiq(1),
bcm(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chipset type.
Possible values are:
lantiq (1) - Use LANTIQ chipset.
bcm (2) - Use BCM chipset."
::= { zxAnXdsl2SeltLineStatusEntry 12 }
--------------------------------------------------------------------------
-- zxAnXdsl2SeltSCStatusTable
--------------------------------------------------------------------------
zxAnXdsl2SeltSCStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2SeltSCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table zxAnXdsl2SeltSCStatusTable contains subcarrier status
result of SELT test. "
::= { zxAnXdsl2LineTest 3 }
zxAnXdsl2SeltSCStatusEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2SeltSCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of zxAnXdsl2SeltSCStatusTable."
INDEX { ifIndex, xdsl2SCStatusDirection, xdsl2SCStatusSegment }
::= { zxAnXdsl2SeltSCStatusTable 1 }
ZxAnXdsl2SeltSCStatusEntry ::=
SEQUENCE {
zxAnXdsl2SeltUerReal OCTET STRING,
zxAnXdsl2SeltUerImg OCTET STRING,
zxAnXdsl2SeltVuer OCTET STRING,
zxAnXdsl2SeltQln OCTET STRING,
zxAnXdsl2SeltCerReal OCTET STRING,
zxAnXdsl2SeltCerImg OCTET STRING
}
zxAnXdsl2SeltUerReal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Uncalibrated Echo Response UER(i* UER_G*Df), shall be
represented in linear format by a scale factor and a normalized
complex number a(i)+j*b(i), where i is a frequency index i ranging
from 0 to NSC-1 and where Df = 4.3125kHz and (NSC-1) X UER_G X Df
is the highest frequency supported by the SELT-PMD functionality.
This parameter is the real part(a) value, and each four bytes has
a value of -2^31 to 2^31-1 for one real part(a) value."
::= { zxAnXdsl2SeltSCStatusEntry 1 }
zxAnXdsl2SeltUerImg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..2048))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Uncalibrated Echo Response UER(i* UER_G*Df), shall be
represented in linear format by a scale factor and a normalized
complex number a(i)+j*b(i), where i is a frequency index i ranging
from 0 to NSC-1 and where Df = 4.3125kHz and (NSC-1) X UER_G X Df
is the highest frequency supported by the SELT-PMD functionality.
This parameter is the image part(b) value, and each four bytes has
a value of -2^31 to 2^31 for one image part(b) value."
::= { zxAnXdsl2SeltSCStatusEntry 2 }
zxAnXdsl2SeltVuer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SELT Variance of Uncalibrated Echo Response.
The REL_VAR_UER(f) provides the relative variance of the
uncalibrated echo response by the SELT-PMD function for each
frequency i X UER_G X Df where i ranges from 0 to NSC - 1 with
and where Df = 4.3125kHz and (NSC-1) X UER_G X Df is the highest
frequency supported by the SELT-PMD functionality.
The relative variance of the uncalibrated echo response
REL_VAR_UER(iX UER_G XDf)shall be represented as an 8-bit unsigned
integer v(i), where i is the subcarrier index i = 0 to NSC - 1.
The value of REL_VAR_UER(iX UER_G XDf) shall be defined as
REL_VAR_UER(iX UER_G XDf) = +3 - v(i)/2 dB.
This parameter is the v(i) value and each byte is an 8-bit unsigned
integer in the range 0 to 254."
::= { zxAnXdsl2SeltSCStatusEntry 3 }
zxAnXdsl2SeltQln OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SELT Quiet Line noise provides the quiet line noise PSD as
measured by the SELT-PMD function (see #A.1.1.2) for each
sub-carrier frequency i X SELTQLN_G X Df where i ranges from
0 to NSC - 1 with and where Df = 4.3125kHz and
(NSC-1) X SELTQLN_G X Df is the highest frequency supported by
the SELT-PMD functionality.
The SELT quiet line noise SELTQLN(i X SELTQLN_G X Df) shall be
represented as an 8 bit unsigned integer n(i), where i is the
subcarrier index i = 0 to NSC - 1.
The value of SELTQLN(i X SELTQLN_G X Df ) shall be defined as
SELTQLN(i X SELTQLN_G X Df ) = -23 - (n(i)/2) dBm/Hz."
::= { zxAnXdsl2SeltSCStatusEntry 4 }
zxAnXdsl2SeltCerReal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Calibrated Echo Response UER(i* UER_G*Df), shall be
represented in linear format by a scale factor and a normalized
complex number a(i)+j*b(i), where i is a frequency index i ranging
from 0 to NSC-1 and where Df = 4.3125kHz and (NSC-1) X UER_G X Df
is the highest frequency supported by the SELT-PMD functionality.
This parameter is the real part(a) value, and each two bytes has
a value of -2^15+1 to 2^15-1 for one real part(a) value."
::= { zxAnXdsl2SeltSCStatusEntry 5 }
zxAnXdsl2SeltCerImg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Calibrated Echo Response UER(i* UER_G*Df), shall be
represented in linear format by a scale factor and a normalized
complex number a(i)+j*b(i), where i is a frequency index i ranging
from 0 to NSC-1 and where Df = 4.3125kHz and (NSC-1) X UER_G X Df
is the highest frequency supported by the SELT-PMD functionality.
This parameter is the image part(b) value, and each two bytes has
a value of -2^15+1 to 2^15-1 for one image part(b) value."
::= { zxAnXdsl2SeltSCStatusEntry 6 }
--------------------------------------------------------------------------
-- zxAnXdsl2MeltConfTable
--------------------------------------------------------------------------
zxAnXdsl2MeltConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2MeltConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The metallic line testing configuration table.
This table describes specifications for metallic line testing (MELT)
configuration."
::= { zxAnXdsl2LineTest 4 }
zxAnXdsl2MeltConfEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2MeltConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The metallic line testing configuration entry."
INDEX { ifIndex }
::= { zxAnXdsl2MeltConfTable 1 }
ZxAnXdsl2MeltConfEntry ::=
SEQUENCE {
zxAnXdsl2MeltCmndConfLdsf INTEGER,
zxAnXdsl2MeltPeakMetallicVtr Integer32,
zxAnXdsl2MeltMaxFarendConductVtr Integer32,
zxAnXdsl2MeltMinFarendConductVtr Integer32,
zxAnXdsl2MeltPairIdToneCmd INTEGER,
zxAnXdsl2MeltPairIdToneFreq Integer32,
zxAnXdsl2MeltWettingCurrentCmd INTEGER
}
zxAnXdsl2MeltCmndConfLdsf OBJECT-TYPE
SYNTAX INTEGER
{
all (1),
resistance (2),
capacitance (3),
voltage (4),
current (5),
frequency (6),
admittance (7),
ppa (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which kind of measurements is to be done."
DEFVAL { all }
::= { zxAnXdsl2MeltConfEntry 1 }
zxAnXdsl2MeltPeakMetallicVtr OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "V"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Peak metallic voltage between tip and ring."
::= { zxAnXdsl2MeltConfEntry 2 }
zxAnXdsl2MeltMaxFarendConductVtr OBJECT-TYPE
SYNTAX Integer32(0..500)
UNITS "0.1 V"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum far-end signature conduction voltage."
::= { zxAnXdsl2MeltConfEntry 3 }
zxAnXdsl2MeltMinFarendConductVtr OBJECT-TYPE
SYNTAX Integer32(0..500)
UNITS "0.1 V"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum far-end signature conduction voltage."
::= { zxAnXdsl2MeltConfEntry 4 }
zxAnXdsl2MeltPairIdToneCmd OBJECT-TYPE
SYNTAX INTEGER
{
start(1),
stop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start/stop the pair identification tone generation."
::= { zxAnXdsl2MeltConfEntry 5 }
zxAnXdsl2MeltPairIdToneFreq OBJECT-TYPE
SYNTAX Integer32(300..3400)
UNITS "Hz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter sets up frequency of the pair identification tone"
REFERENCE "ITU-T G.996.2 #E.2.1.4"
::= { zxAnXdsl2MeltConfEntry 6 }
zxAnXdsl2MeltWettingCurrentCmd OBJECT-TYPE
SYNTAX INTEGER
{
start(1),
stop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Start/stop a wetting current to prevent contact oxidation on the
subscriber line."
::= { zxAnXdsl2MeltConfEntry 7 }
--------------------------------------------------------------------------
-- zxAnXdsl2MeltStatusTable
--------------------------------------------------------------------------
zxAnXdsl2MeltStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2MeltStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The metallic line testing status table.
This table describes specifications for metallic line testing (MELT)
status."
::= { zxAnXdsl2LineTest 5 }
zxAnXdsl2MeltStatusEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2MeltStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The metallic line testing status entry.
Mib format: zxAnXdsl2Melt[Ac/Dc][A/R/C/V/F/G/B][tg/rg/tr/rt]."
INDEX { ifIndex }
::= { zxAnXdsl2MeltStatusTable 1 }
ZxAnXdsl2MeltStatusEntry ::=
SEQUENCE {
zxAnXdsl2MeltLdsfResult Xdsl2LdsfResult,
zxAnXdsl2MeltDcAtg Integer32,
zxAnXdsl2MeltDcArg Integer32,
zxAnXdsl2MeltAcAtg Integer32,
zxAnXdsl2MeltAcArg Integer32,
zxAnXdsl2MeltDcRtr Integer32,
zxAnXdsl2MeltDcRrt Integer32,
zxAnXdsl2MeltDcRtg Integer32,
zxAnXdsl2MeltDcRrg Integer32,
zxAnXdsl2MeltCtr Integer32,
zxAnXdsl2MeltCtg Integer32,
zxAnXdsl2MeltCrg Integer32,
zxAnXdsl2MeltDcVtr Integer32,
zxAnXdsl2MeltDcVtg Integer32,
zxAnXdsl2MeltDcVrg Integer32,
zxAnXdsl2MeltAcVtr Integer32,
zxAnXdsl2MeltAcVtg Integer32,
zxAnXdsl2MeltAcVrg Integer32,
zxAnXdsl2MeltAcFtr Integer32,
zxAnXdsl2MeltAcFtg Integer32,
zxAnXdsl2MeltAcFrg Integer32,
zxAnXdsl2MeltGtr Integer32,
zxAnXdsl2MeltBtr Integer32,
zxAnXdsl2MeltGtg Integer32,
zxAnXdsl2MeltBtg Integer32,
zxAnXdsl2MeltGrg Integer32,
zxAnXdsl2MeltBrg Integer32,
zxAnXdsl2MeltPpaResistance Integer32
}
zxAnXdsl2MeltLdsfResult OBJECT-TYPE
SYNTAX Xdsl2LdsfResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the recent occasion the loop diagnostics mode
forced (LDSF) was issued for the associated line. Possible
values are:
none (1) - The default value in case LDSF was never
requested for the associated line.
success (2) - The recent command completed
successfully.
inProgress (3) - The Loop Diagnostics process is in
progress.
unsupported (4) - The NE or the line card doesn't support
LDSF.
cannotRun (5) - The NE cannot initiate the command, due
to a non specific reason.
aborted (6) - The Loop Diagnostics process aborted.
failed (7) - The Loop Diagnostics process failed.
illegalMode (8) - The NE cannot initiate the command, due
to the specific mode of the relevant
line.
adminUp (9) - The NE cannot initiate the command, as
the relevant line is administratively
'Up'.
tableFull (10)- The NE cannot initiate the command, due
to reaching the maximum number of rows
in the results table.
noResources (11)- The NE cannot initiate the command, due
to lack of internal memory resources."
DEFVAL { none }
::= { zxAnXdsl2MeltStatusEntry 1 }
zxAnXdsl2MeltDcAtg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 uA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DC current between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 2 }
zxAnXdsl2MeltDcArg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 uA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DC current between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 3 }
zxAnXdsl2MeltAcAtg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 uA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AC current between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 4 }
zxAnXdsl2MeltAcArg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 uA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AC current between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 5 }
zxAnXdsl2MeltDcRtr OBJECT-TYPE
SYNTAX Integer32
UNITS "ohm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DC resistance between tip and ring."
::= { zxAnXdsl2MeltStatusEntry 6 }
zxAnXdsl2MeltDcRrt OBJECT-TYPE
SYNTAX Integer32
UNITS "ohm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DC resistance between ring and tip."
::= { zxAnXdsl2MeltStatusEntry 7 }
zxAnXdsl2MeltDcRtg OBJECT-TYPE
SYNTAX Integer32
UNITS "ohm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DC resistance between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 8 }
zxAnXdsl2MeltDcRrg OBJECT-TYPE
SYNTAX Integer32
UNITS "ohm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DC resistance between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 9 }
zxAnXdsl2MeltCtr OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 nF"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Capacitance between tip and ring."
::= { zxAnXdsl2MeltStatusEntry 10 }
zxAnXdsl2MeltCtg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 nF"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Capacitance between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 11 }
zxAnXdsl2MeltCrg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 nF"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Capacitance between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 12 }
zxAnXdsl2MeltDcVtr OBJECT-TYPE
SYNTAX Integer32
UNITS "100 mV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign DC voltage between tip and ring."
::= { zxAnXdsl2MeltStatusEntry 13 }
zxAnXdsl2MeltDcVtg OBJECT-TYPE
SYNTAX Integer32
UNITS "100 mV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign DC voltage between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 14 }
zxAnXdsl2MeltDcVrg OBJECT-TYPE
SYNTAX Integer32
UNITS "100 mV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign DC voltage between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 15 }
zxAnXdsl2MeltAcVtr OBJECT-TYPE
SYNTAX Integer32
UNITS "100 mV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign AC root mean square (RMS) voltage between tip and ring."
::= { zxAnXdsl2MeltStatusEntry 16 }
zxAnXdsl2MeltAcVtg OBJECT-TYPE
SYNTAX Integer32
UNITS "100 mV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign AC root mean square (RMS) voltage between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 17 }
zxAnXdsl2MeltAcVrg OBJECT-TYPE
SYNTAX Integer32
UNITS "100 mV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign AC root mean square (RMS) voltage between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 18 }
zxAnXdsl2MeltAcFtr OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign AC voltage frequency between tip and ring."
::= { zxAnXdsl2MeltStatusEntry 19 }
zxAnXdsl2MeltAcFtg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign AC voltage frequency between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 20 }
zxAnXdsl2MeltAcFrg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Foreign AC voltage frequency between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 21 }
zxAnXdsl2MeltGtr OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Conductance between tip and ring."
::= { zxAnXdsl2MeltStatusEntry 22 }
zxAnXdsl2MeltBtr OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Susceptance between tip and ring."
::= { zxAnXdsl2MeltStatusEntry 23 }
zxAnXdsl2MeltGtg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Conductance between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 24 }
zxAnXdsl2MeltBtg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Susceptance between tip and ground."
::= { zxAnXdsl2MeltStatusEntry 25 }
zxAnXdsl2MeltGrg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Conductance between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 26 }
zxAnXdsl2MeltBrg OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Susceptance between ring and ground."
::= { zxAnXdsl2MeltStatusEntry 27 }
zxAnXdsl2MeltPpaResistance OBJECT-TYPE
SYNTAX Integer32
UNITS "ohm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the resistance of a detectd PPA(Passive Test
Termination).
0xFFFFFFFF means that is unsupported."
::= { zxAnXdsl2MeltStatusEntry 28 }
--------------------------------------------------------------------------
-- zxAnXdsl2SeltRawDataTable
--------------------------------------------------------------------------
zxAnXdsl2SeltRawDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2SeltRawDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the result of SELT raw data test."
::= { zxAnXdsl2LineTest 6 }
zxAnXdsl2SeltRawDataEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2SeltRawDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SELT raw data entry."
INDEX { ifIndex,zxAnXdsl2RawDataSegment }
::= { zxAnXdsl2SeltRawDataTable 1 }
ZxAnXdsl2SeltRawDataEntry ::=
SEQUENCE {
zxAnXdsl2RawDataSegment Integer32,
zxAnXdsl2SeltRawData OCTET STRING
}
zxAnXdsl2RawDataSegment OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index for the array of raw data SELT result."
::= { zxAnXdsl2SeltRawDataEntry 1 }
zxAnXdsl2SeltRawData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The raw data test result shall be stored and reported
to the management entity for the further calculation
and analysis. ALL the datas were divided into several
1KB packet and transmited a packet at a time."
::= { zxAnXdsl2SeltRawDataEntry 2 }
--------------------------------------------------------------------------
-- zxAnXdsl2FextCoefficientTable
--------------------------------------------------------------------------
zxAnXdsl2VectoringGlobalObjects
OBJECT IDENTIFIER ::= {zxAnXdsl2Vectoring 1}
zxAnXdsl2VectorTrackingEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable vectoring tracking.
enabled(1) - Update the channel matrix automatically.
disabled(2)- Update the channel matrix when link is up or down.
"
DEFVAL { enabled }
::= { zxAnXdsl2VectoringGlobalObjects 1 }
zxAnXdsl2FextCoefficientTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2FextCoefficientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The FEXT coefficient table."
::= { zxAnXdsl2Vectoring 2 }
zxAnXdsl2FextCoefficientEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2FextCoefficientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The FEXT coefficient entry."
INDEX
{
zxAnXdsl2FextSrcIfIndex,
zxAnXdsl2FextDstIfIndex
}
::= { zxAnXdsl2FextCoefficientTable 1 }
ZxAnXdsl2FextCoefficientEntry ::=
SEQUENCE {
zxAnXdsl2FextSrcIfIndex ZxAnIfindex,
zxAnXdsl2FextDstIfIndex ZxAnIfindex,
zxAnXdsl2FextCoefficientDs OCTET STRING,
zxAnXdsl2FextCoefficientUs OCTET STRING
}
zxAnXdsl2FextSrcIfIndex OBJECT-TYPE
SYNTAX ZxAnIfindex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index for a FEXT source port."
::= { zxAnXdsl2FextCoefficientEntry 1 }
zxAnXdsl2FextDstIfIndex OBJECT-TYPE
SYNTAX ZxAnIfindex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index for a FEXT destination port."
::= { zxAnXdsl2FextCoefficientEntry 2 }
zxAnXdsl2FextCoefficientDs OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The downstream FEXT coupling coefficient shall be stored and
reported to the management entity upon request at least for all
pairs of line indices(i, j) in the vectored group and sub-carrier
indices n = k X G for which FEXT from line j into line i is
estimated or cancelled over a frequency band containing the
subcarrier index n. In this description, G is the sub-carrier
group size for reporting the FEXT coupling and is restricted to
powers of two less than or equal to 8 and k = 0 up to a maximum
number of sub-carrier groups of 511."
REFERENCE "ITU-T G.993.5, paragraph #11.2.1.2"
::= { zxAnXdsl2FextCoefficientEntry 3 }
zxAnXdsl2FextCoefficientUs OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upstream FEXT coupling coefficient."
REFERENCE "ITU-T G.993.5, paragraph #11.2.1.3"
::= { zxAnXdsl2FextCoefficientEntry 4 }
zxAnXdsl2VectoringCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2VectoringCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vectoring card table."
::= { zxAnXdsl2Vectoring 3 }
zxAnXdsl2VectoringCardEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2VectoringCardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vectoring card table entry."
INDEX
{
zxAnXdsl2VectoringRack,
zxAnXdsl2VectoringShelf,
zxAnXdsl2VectoringSlot
}
::= { zxAnXdsl2VectoringCardTable 1 }
ZxAnXdsl2VectoringCardEntry ::=
SEQUENCE {
zxAnXdsl2VectoringRack Integer32,
zxAnXdsl2VectoringShelf Integer32,
zxAnXdsl2VectoringSlot Integer32,
zxAnXdsl2VectoringConfigClear INTEGER,
zxAxXdsl2VectoringHwPathStatus INTEGER
}
zxAnXdsl2VectoringRack OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rack No.."
::= { zxAnXdsl2VectoringCardEntry 1 }
zxAnXdsl2VectoringShelf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Shelf No.."
::= { zxAnXdsl2VectoringCardEntry 2 }
zxAnXdsl2VectoringSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Card No.."
::= { zxAnXdsl2VectoringCardEntry 3 }
zxAnXdsl2VectoringConfigClear OBJECT-TYPE
SYNTAX INTEGER
{
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set value to '1' to clear the card vectoring configuration before
plugging out the card."
::= { zxAnXdsl2VectoringCardEntry 4 }
zxAxXdsl2VectoringHwPathStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
fault(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Vectoring hardward path status."
::= { zxAnXdsl2VectoringCardEntry 5 }
--------------------------------------------------------------------------
-- zxAnXdsl2VectoringCrosstalkTable
--------------------------------------------------------------------------
zxAnXdsl2VectoringCrosstalkTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2VectoringCrosstalkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vectoring crosstalk table."
::= { zxAnXdsl2Vectoring 4 }
zxAnXdsl2VectoringCrosstalkEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2VectoringCrosstalkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vectoring crosstalk entry."
INDEX
{
ifIndex
}
::= { zxAnXdsl2VectoringCrosstalkTable 1 }
ZxAnXdsl2VectoringCrosstalkEntry ::=
SEQUENCE {
zxAnXdsl2CrosstalkWeightsDs OCTET STRING,
zxAnXdsl2CrosstalkWeightsUs OCTET STRING
}
zxAnXdsl2CrosstalkWeightsDs OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..768))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the downstream crosstalk weight list of up to
M*N<=384 ports as following structure, each crosstalk weight is
present with two octets, and 'FF' is set if octet is not in use.
Octets 1-2*M -- 1 to M port of slot 1
Octets (2*M+1)- 4*M -- 1 to M port of slot 2
Octets (4*M + 1) - 6*M -- 1 to M port of slot 3
........
Octets (2*(N-1)*M + 1) - 2*N*M -- 1 to M port of slot N
Note: M means maximum port number of card,
N means maximum card number of vectoring group."
::= { zxAnXdsl2VectoringCrosstalkEntry 1 }
zxAnXdsl2CrosstalkWeightsUs OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..768))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the upstream crosstalk weight list of up to
M*N<=384 ports as following structure, each crosstalk weight is
present with two octets, and 'FF' is set if octet is not in use.
Octets 1-2*M -- 1 to M port of slot 1
Octets (2*M+1)- 4*M -- 1 to M port of slot 2
Octets (4*M + 1) - 6*M -- 1 to M port of slot 3
........
Octets (2*(N-1)*M + 1) - 2*N*M -- 1 to M port of slot N
Note: M means maximum port number of card,
N means maximum card number of vectoring group."
::= { zxAnXdsl2VectoringCrosstalkEntry 2 }
--------------------------------------------------------------------------
-- zxAnXdsl2XlogSampleTable
--------------------------------------------------------------------------
zxAnXdsl2XlogSampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2XlogSampleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vectoring crosstalk logarithm sample table."
::= { zxAnXdsl2Vectoring 5 }
zxAnXdsl2XlogSampleEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2XlogSampleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A zxAnXdsl2XlogSampleTable entry."
INDEX
{
ifIndex,
zxAnXdsl2XlogSampleDirection,
zxAnXdsl2XlogSampleToneIndex
}
::= { zxAnXdsl2XlogSampleTable 1 }
ZxAnXdsl2XlogSampleEntry ::=
SEQUENCE
{
zxAnXdsl2XlogSampleDirection Xdsl2Direction,
zxAnXdsl2XlogSampleToneIndex Integer32,
zxAnXdsl2XlogSampleValue OCTET STRING
}
zxAnXdsl2XlogSampleDirection OBJECT-TYPE
SYNTAX Xdsl2Direction
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The direction of vectoring crosstalk logarithm sample."
::= { zxAnXdsl2XlogSampleEntry 1 }
zxAnXdsl2XlogSampleToneIndex OBJECT-TYPE
SYNTAX Integer32(1..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tone index."
::= { zxAnXdsl2XlogSampleEntry 2 }
zxAnXdsl2XlogSampleValue OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..768))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates the crosstalk logarithm sample value list of up to
M*N<=384 ports as following structure, each logarithm sample value
is present with two octets, and 'FF' is set if octet is not in use.
Octets 1-2*M -- 1 to M port of slot 1
Octets (2*M+1)- 4*M -- 1 to M port of slot 2
Octets (4*M + 1) - 6*M -- 1 to M port of slot 3
........
Octets (2*(N-1)*M + 1) - 2*N*M -- 1 to M port of slot N
Note: M means maximum port number of card,
N means maximum card number of vectoring group.
The real Xlog(f) value is represented as (6-m(i)/10), with m(i)
in the range 0 to 1022. A special value m=1023 indicates that
no measurement could be done because it is out of the passband or
that the crosstalk is out of range to be represented."
::= { zxAnXdsl2XlogSampleEntry 3 }
--------------------------------------------------------------------------
-- zxAnXdsl2SCStatusTable
--------------------------------------------------------------------------
zxAnXdsl2SCStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnXdsl2SCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VDSL Sub-carrier status table."
::= { zxAnXdsl2Status 2 }
zxAnXdsl2SCStatusEntry OBJECT-TYPE
SYNTAX ZxAnXdsl2SCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VDSL sub-carrier status entry."
INDEX
{
ifIndex,
xdsl2SCStatusDirection
}
::= { zxAnXdsl2SCStatusTable 1 }
ZxAnXdsl2SCStatusEntry ::= SEQUENCE
{
zxAnXdsl2SCStatusRmsGain Integer32
}
zxAnXdsl2SCStatusRmsGain OBJECT-TYPE
SYNTAX Integer32
UNITS "0.01dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average gi value (RMSGI)."
REFERENCE "ITU-T G.992.3, paragraph #8.5.1"
::= { zxAnXdsl2SCStatusEntry 1 }
--------------------------------------------------------------------------
-- Trap
--------------------------------------------------------------------------
zxAnXdsl2LinePerfLOFSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLofs,
zxAnXdsl2XtucThreshLofs
}
STATUS current
DESCRIPTION
"This notification indicates that the LOF seconds
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 1 }
zxAnXdsl2LinePerfLOFSThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLofs,
zxAnXdsl2XturThreshLofs
}
STATUS current
DESCRIPTION
"This notification indicates that the LOF seconds
threshold has been reached/exceeded for the referred XTU-R."
::= { zxAnXdsl2TrapObjects 2 }
zxAnXdsl2LinePerfLOLSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLols,
zxAnXdsl2XtucThreshLols
}
STATUS current
DESCRIPTION
"This notification indicates that the LOL seconds
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 3 }
-- zxAnXdsl2LinePerfLOLSThreshXtur NOTIFICATION-TYPE
-- OBJECTS
-- {
-- zxAnXdsl2PMLCurr15MLols,
-- zxAnXdsl2XturThreshLols
-- }
-- STATUS current
-- DESCRIPTION
-- "This notification indicates that the LOL seconds
-- threshold has been reached/exceeded for the referred XTU-R."
-- ::= { zxAnXdsl2TrapObjects 4 }
zxAnXdsl2LinePerfLPRSThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLprs,
zxAnXdsl2XtucThreshLprs
}
STATUS current
DESCRIPTION
"This notification indicates that the LPR seconds
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 5 }
zxAnXdsl2LinePerfLPRSThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MLprs,
zxAnXdsl2XturThreshLprs
}
STATUS current
DESCRIPTION
"This notification indicates that the LPR seconds
threshold has been reached/exceeded for the referred XTU-R."
::= { zxAnXdsl2TrapObjects 6 }
zxAnXdsl2LinePerfPtmCrcErrsThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MPtmCrcErrs,
zxAnXdsl2XtucThreshPtmCrcErrs
}
STATUS current
DESCRIPTION
"This notification indicates that the Ptm Crc Errors
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 7 }
zxAnXdsl2LinePerfPtmCrcErrsThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MPtmCrcErrs,
zxAnXdsl2XturThreshPtmCrcErrs
}
STATUS current
DESCRIPTION
"This notification indicates that the Ptm Crc Errors
threshold has been reached/exceeded for the referred XTU-R."
::= { zxAnXdsl2TrapObjects 8 }
zxAnXdsl2LinePerfPtmCodViolsThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MPtmCodViol,
zxAnXdsl2XtucThreshPtmCodViol
}
STATUS current
DESCRIPTION
"This notification indicates that the Ptm coding violations
threshold has been reached/exceeded for the referred XTU-C."
::= { zxAnXdsl2TrapObjects 9 }
zxAnXdsl2LinePerfPtmCodViolsThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr15MPtmCodViol,
zxAnXdsl2XturThreshPtmCodViol
}
STATUS current
DESCRIPTION
"This notification indicates that the Ptm coding violations
threshold has been reached/exceeded for the referred XTU-R."
::= { zxAnXdsl2TrapObjects 10 }
zxAnXdsl2LineXtucLowDataRateTrap NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2ChConfMaxDataRateDs,
xdsl2ChStatusActDataRate,
zxAnXdsl2XtucLowDataRateTolerance,
zxAnXdsl2XtucLowDataRateThresh
}
STATUS current
DESCRIPTION
"zxAnXdsl2XtucLowDataRateTolerance threshold or
zxAnXdsl2XtucLowDataRateThresh reached."
::= { zxAnXdsl2TrapObjects 11 }
zxAnXdsl2LineXtucLowDataRateClearTrap NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2ChConfMaxDataRateDs,
xdsl2ChStatusActDataRate,
zxAnXdsl2XtucLowDataRateTolerance,
zxAnXdsl2XtucLowDataRateThresh
}
STATUS current
DESCRIPTION
" zxAnXdsl2LineXtucLowDataRateTrap clear."
::= { zxAnXdsl2TrapObjects 12 }
zxAnXdsl2LineXturLowDataRateTrap NOTIFICATION-TYPE
OBJECTS { zxAnXdsl2ChConfMaxDataRateUs, xdsl2ChStatusActDataRate,
zxAnXdsl2XturLowDataRateTolerance, zxAnXdsl2XturLowDataRateThresh}
STATUS current
DESCRIPTION
"zxAnXdsl2XturLowDataRateTolerance threshold or zxAnXdsl2XturLowDataRateThresh reached."
::= { zxAnXdsl2TrapObjects 13 }
zxAnXdsl2LineXturLowDataRateClearTrap NOTIFICATION-TYPE
OBJECTS { zxAnXdsl2ChConfMaxDataRateUs, xdsl2ChStatusActDataRate,
zxAnXdsl2XturLowDataRateTolerance, zxAnXdsl2XturLowDataRateThresh}
STATUS current
DESCRIPTION
" zxAnXdsl2LineXturLowDataRateTrap clear."
::= { zxAnXdsl2TrapObjects 14 }
zxAnXdsl2DataPathMismatchTrap NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2LnStatusDataPathType,
zxAnXdsl2LnStatusActDataPathType
}
STATUS current
DESCRIPTION
"This trap will be sent to managemet system when configured
data path type is different from actual data path type on the
interface."
::= { zxAnXdsl2TrapObjects 15 }
zxAnXdsl2DataPathMismatchClrTrap NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2LnStatusDataPathType,
zxAnXdsl2LnStatusActDataPathType
}
STATUS current
DESCRIPTION
"zxAnXdsl2DataPathMismatchTrap will be cleared when configured
data path type matches actual data path type on the
interface."
::= { zxAnXdsl2TrapObjects 16 }
zxAnXdsl2LnVectorUnsupportAlm NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2LnFextCancellationDs,
zxAnXdsl2LnFextCancellationUs
}
STATUS current
DESCRIPTION
"This trap will be sent when a non-vectoring modem is
connecting to a vector port."
::= { zxAnXdsl2TrapObjects 17 }
zxAnXdsl2LnVectorUnsupportClr NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2LnFextCancellationDs,
zxAnXdsl2LnFextCancellationUs
}
STATUS current
DESCRIPTION
"This trap will be sent when the non-vectoring modem
no longer connects to the vector port."
::= { zxAnXdsl2TrapObjects 18 }
zxAnXdsl2LnCpeUpboPsdErrorNotify NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2LnUpboConfPrf
}
STATUS current
DESCRIPTION
"This trap will be sent when CPE UPBO PSD errored."
::= { zxAnXdsl2TrapObjects 19 }
zxAnXdsl2VectoringConfigCleared NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2VectoringConfigClear
}
STATUS current
DESCRIPTION
"This trap will be sent when card vectoring configuration is
cleared."
::= { zxAnXdsl2TrapObjects 20 }
zxAnXdsl2VectorHwPathAbnormalAlm NOTIFICATION-TYPE
OBJECTS
{
zxAxXdsl2VectoringHwPathStatus
}
STATUS current
DESCRIPTION
"zxAnXdsl2VectorHwPathAbnormalAlm will be sent when vectoring
hardware path is abnormal, such as real time clock abnormal,
hardware interface abnormal and so on."
::= { zxAnXdsl2TrapObjects 21 }
zxAnXdsl2VectorHwPathAbnormalClr NOTIFICATION-TYPE
OBJECTS
{
zxAxXdsl2VectoringHwPathStatus
}
STATUS current
DESCRIPTION
"zxAnXdsl2VectorHwPathAbnormalClr will be sent when
zxAnXdsl2VectorHwPathAbnormalAlm is cleared."
::= { zxAnXdsl2TrapObjects 22 }
zxAnXdsl2XtucEsLossOverThreshAlm NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr1DayTxEsPkts,
zxAnXdsl2PMLCurr1DayRxEsPkts,
zxAnXdsl2XtucEsLossRatioThresh
}
STATUS current
DESCRIPTION
"This trap will be sent when vector error sample packets loss
rate reached threshold in downstream."
::= { zxAnXdsl2TrapObjects 23 }
zxAnXdsl2XtucEsLossOverThreshClr NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr1DayTxEsPkts,
zxAnXdsl2PMLCurr1DayRxEsPkts,
zxAnXdsl2XtucEsLossRatioThresh
}
STATUS current
DESCRIPTION
"This trap will be sent when vector error sample packets loss
rate recoveres below the threshold in downstream."
::= { zxAnXdsl2TrapObjects 24 }
zxAnXdsl2XturEsLossOverThreshAlm NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr1DayTxEsPkts,
zxAnXdsl2PMLCurr1DayRxEsPkts,
zxAnXdsl2XturEsLossRatioThresh
}
STATUS current
DESCRIPTION
"This trap will be sent when vector error sample packets loss
rate reached threshold in upstream."
::= { zxAnXdsl2TrapObjects 25 }
zxAnXdsl2XturEsLossOverThreshClr NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMLCurr1DayTxEsPkts,
zxAnXdsl2PMLCurr1DayRxEsPkts,
zxAnXdsl2XturEsLossRatioThresh
}
STATUS current
DESCRIPTION
"This trap will be sent when vector error sample packets loss
rate recoveres below the threshold in upstream."
::= { zxAnXdsl2TrapObjects 26 }
zxAnXdsl2InpLeftrsThreshXtuc NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMChCurr15MInpLeftrs,
zxAnXdsl2XtucThreshInpLeftrs
}
STATUS current
DESCRIPTION
"This notification indicates that the 'leftr' defect seconds
threshold has been reached/exceeded in a 15-min interval for
the referred XTU-C."
::= { zxAnXdsl2TrapObjects 27 }
zxAnXdsl2InpLeftrsThreshXtur NOTIFICATION-TYPE
OBJECTS
{
zxAnXdsl2PMChCurr15MInpLeftrs,
zxAnXdsl2XturThreshInpLeftrs
}
STATUS current
DESCRIPTION
"This notification indicates that the 'leftr' defect seconds
threshold has been reached/exceeded in a 15-min interval for
the referred XTU-R."
::= { zxAnXdsl2TrapObjects 28 }
zxAnXdsl2XtucLosAlm NOTIFICATION-TYPE
OBJECTS
{
xdsl2LineStatusXtuc
}
STATUS current
DESCRIPTION
"When xdsl2LineStatusXtuc bit 3(lossOfSignal) is 1,
zxAnXdsl2XtucLosAlm will be sent to indicate that XTU-C current
status is loss of signal."
::= { zxAnXdsl2TrapObjects 29 }
zxAnXdsl2XtucLosClr NOTIFICATION-TYPE
OBJECTS
{
xdsl2LineStatusXtuc
}
STATUS current
DESCRIPTION
"zxAnXdsl2XtucLosClr will be sent when zxAnXdsl2XtucLosAlm is
cleared."
::= { zxAnXdsl2TrapObjects 30 }
zxAnXdsl2XturLosAlm NOTIFICATION-TYPE
OBJECTS
{
xdsl2LineStatusXtur
}
STATUS current
DESCRIPTION
"When xdsl2LineStatusXtur bit 3(lossOfSignal) is 1,
zxAnXdsl2XturLosAlm will be sent to indicate that XTU-R current
status is loss of signal."
::= { zxAnXdsl2TrapObjects 31 }
zxAnXdsl2XturLosClr NOTIFICATION-TYPE
OBJECTS
{
xdsl2LineStatusXtur
}
STATUS current
DESCRIPTION
"zxAnXdsl2XturLosClr will be sent when zxAnXdsl2XturLosAlm is
cleared."
::= { zxAnXdsl2TrapObjects 32 }
zxAnXdsl2XturLprAlm NOTIFICATION-TYPE
OBJECTS
{
xdsl2LineStatusXtur
}
STATUS current
DESCRIPTION
"When xdsl2LineStatusXtur bit 4(lossOfSignal) is 1,
zxAnXdsl2XturLprAlm will be sent to indicate that XTU-R current
status is loss of power."
::= { zxAnXdsl2TrapObjects 33 }
zxAnXdsl2XturLprClr NOTIFICATION-TYPE
OBJECTS
{
xdsl2LineStatusXtur
}
STATUS current
DESCRIPTION
"zxAnXdsl2XturLprClr will be sent when zxAnXdsl2XturLprAlm is
cleared."
::= { zxAnXdsl2TrapObjects 34 }
END
View Git Blame Copy Permalink