1032 lines
40 KiB
Plaintext
1032 lines
40 KiB
Plaintext
|
|
ZTE-AN-INTERFACE-BRG-PERF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Integer32, Gauge32, Counter64 FROM SNMPv2-SMI
|
|
RowStatus, DisplayString, TruthValue,
|
|
TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
zxAnInterfaceMib FROM ZTE-AN-INTERFACE-MIB
|
|
HCPerfCurrentCount FROM HC-PerfHist-TC-MIB;
|
|
|
|
zxAnInterfaceBrgPerfMib MODULE-IDENTITY
|
|
LAST-UPDATED "201109132000Z"
|
|
ORGANIZATION "ZTE Corporation"
|
|
CONTACT-INFO "Zhang Weiping ZTE Corporation
|
|
Mail: zhang.weiping@zte.com.cn
|
|
Tel : 021-68896470"
|
|
DESCRIPTION
|
|
"The MIB module for the Performance Management of ZTE Access
|
|
Node interface."
|
|
|
|
REVISION "201109132000Z"
|
|
DESCRIPTION
|
|
"Modify this mib according to standard."
|
|
|
|
REVISION "201109101600Z"
|
|
DESCRIPTION
|
|
"Modify the description."
|
|
|
|
REVISION "201107021400Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= {zxAnInterfaceMib 13}
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- Following management objects are defined.
|
|
-- 1. zxAnBrgIfCurr15MinPerfTable
|
|
-- 2. zxAnBrgIfCurr1DayPerfTable
|
|
-- 3. zxAnBrgIfHis15MinPerfTable
|
|
-- 4. zxAnBrgIfHis1DayPerfTable
|
|
-- 5. zxAnBrgIfAlmProfileConfTable
|
|
-- 6. zxAnBrgIfAlmProfileApplyTable
|
|
-- 7. zxAnBrgIfAlmProfileTable
|
|
|
|
-- Following conformance information is defined.
|
|
-- 31. zxAnBrgIfPerfConformance
|
|
--------------------------------------------------------------------------------
|
|
zxAnBrgIfPerfObjects OBJECT IDENTIFIER ::= { zxAnInterfaceBrgPerfMib 2 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 1. zxAnBrgIfCurr15MinPerfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnBrgIfCurr15MinPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnBrgIfCurr15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data table of the bridge
|
|
interfaces."
|
|
::= { zxAnBrgIfPerfObjects 2 }
|
|
|
|
zxAnBrgIfCurr15MinPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnBrgIfCurr15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data entry of the bridge
|
|
interfaces."
|
|
INDEX { ifIndex}
|
|
::= { zxAnBrgIfCurr15MinPerfTable 1 }
|
|
|
|
ZxAnBrgIfCurr15MinPerfEntry ::= SEQUENCE {
|
|
zxAnBrgIfC15MTimeElapsed Gauge32,
|
|
zxAnBrgIfC15MInOctets Counter64,
|
|
zxAnBrgIfC15MInUcastPkts Counter64,
|
|
zxAnBrgIfC15MInMcastPkts Counter64,
|
|
zxAnBrgIfC15MInBcastPkts Counter64,
|
|
zxAnBrgIfC15MOutOctets Counter64,
|
|
zxAnBrgIfC15MOutUcastPkts Counter64,
|
|
zxAnBrgIfC15MOutMcastPkts Counter64,
|
|
zxAnBrgIfC15MOutBcastPkts Counter64,
|
|
zxAnBrgIfC15MReset INTEGER
|
|
}
|
|
|
|
zxAnBrgIfC15MTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge32(0..899)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the beginning of the
|
|
current 15 minutes interval."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 1 }
|
|
|
|
zxAnBrgIfC15MInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in current 15 minutes interval."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 2 }
|
|
|
|
zxAnBrgIfC15MInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were not addressed to a multicast
|
|
or broadcast address at this sub-layer and in current 15
|
|
minutes interval."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 3 }
|
|
|
|
zxAnBrgIfC15MInMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer and in current 15 minutes interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 4 }
|
|
|
|
zxAnBrgIfC15MInBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a broadcast
|
|
address at this sub-layer and in current 15 minutes interval."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 5 }
|
|
|
|
zxAnBrgIfC15MOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters in curent 15 minutes interval."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 6 }
|
|
|
|
zxAnBrgIfC15MOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were not addressed to a
|
|
multicast or broadcast address at this sub-layer, including
|
|
those that were discarded or not sent in current 15 minutes
|
|
interval."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 7 }
|
|
|
|
zxAnBrgIfC15MOutMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
multicast address at this sub-layer, including those that
|
|
were discarded or not sent and in current 15 minutes interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 8 }
|
|
|
|
zxAnBrgIfC15MOutBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
broadcast address at this sub-layer, including those that
|
|
were discarded or not sent in 15 current minutes interval."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 9 }
|
|
|
|
zxAnBrgIfC15MReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
perfReset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear all the current 15 minutes performance variables.
|
|
When get this variable, always return 1."
|
|
::= { zxAnBrgIfCurr15MinPerfEntry 100 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 2. zxAnBrgIfCurr1DayPerfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnBrgIfCurr1DayPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnBrgIfCurr1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data table of the bridge
|
|
interfaces."
|
|
::= { zxAnBrgIfPerfObjects 3 }
|
|
|
|
zxAnBrgIfCurr1DayPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnBrgIfCurr1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data entry of the bridge
|
|
interfaces."
|
|
INDEX { ifIndex}
|
|
::= { zxAnBrgIfCurr1DayPerfTable 1 }
|
|
|
|
ZxAnBrgIfCurr1DayPerfEntry ::= SEQUENCE {
|
|
zxAnBrgIfC1DTimeElapsed Gauge32,
|
|
zxAnBrgIfC1DInOctets Counter64,
|
|
zxAnBrgIfC1DInUcastPkts Counter64,
|
|
zxAnBrgIfC1DInMcastPkts Counter64,
|
|
zxAnBrgIfC1DInBcastPkts Counter64,
|
|
zxAnBrgIfC1DOutOctets Counter64,
|
|
zxAnBrgIfC1DOutUcastPkts Counter64,
|
|
zxAnBrgIfC1DOutMcastPkts Counter64,
|
|
zxAnBrgIfC1DOutBcastPkts Counter64,
|
|
zxAnBrgIfC1DReset INTEGER
|
|
}
|
|
|
|
zxAnBrgIfC1DTimeElapsed OBJECT-TYPE
|
|
SYNTAX Gauge32(0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the beginning of the
|
|
current 1 day interval."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 1 }
|
|
|
|
zxAnBrgIfC1DInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in current one day interval."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 2 }
|
|
|
|
zxAnBrgIfC1DInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in current one day interval."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 3 }
|
|
|
|
zxAnBrgIfC1DInMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer and in current one day interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 4 }
|
|
|
|
zxAnBrgIfC1DInBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a broadcast
|
|
address at this sub-layer and in current one day interval."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 5 }
|
|
|
|
zxAnBrgIfC1DOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters in curent one day interval."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 6 }
|
|
|
|
zxAnBrgIfC1DOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were not addressed to a
|
|
multicast or broadcast address at this sub-layer, including
|
|
those that were discarded or not sent in current one day interval."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 7 }
|
|
|
|
zxAnBrgIfC1DOutMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
multicast address at this sub-layer, including those that
|
|
were discarded or not sent and in current one day interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 8 }
|
|
|
|
zxAnBrgIfC1DOutBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
broadcast address at this sub-layer, including those that
|
|
were discarded or not sent in current one day interval."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 9 }
|
|
|
|
zxAnBrgIfC1DReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
perfReset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clear all the current 1 day performance variables.
|
|
When get this variable, always return 1."
|
|
::= { zxAnBrgIfCurr1DayPerfEntry 100 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 3. zxAnBrgIfHis15MinPerfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnBrgIfHis15MinPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnBrgIfHis15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval history performance data table of the
|
|
bridge interfaces."
|
|
::= { zxAnBrgIfPerfObjects 4 }
|
|
|
|
zxAnBrgIfHis15MinPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnBrgIfHis15MinPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data entry of the bridge
|
|
interfaces."
|
|
INDEX { ifIndex,zxAnBrgIfH15MIntervalNo }
|
|
::= { zxAnBrgIfHis15MinPerfTable 1 }
|
|
|
|
ZxAnBrgIfHis15MinPerfEntry ::= SEQUENCE {
|
|
zxAnBrgIfH15MIntervalNo Integer32,
|
|
zxAnBrgIfH15MIntervalValidData TruthValue,
|
|
zxAnBrgIfH15MDateTime DateAndTime,
|
|
zxAnBrgIfH15MInOctets Counter64,
|
|
zxAnBrgIfH15MInUcastPkts Counter64,
|
|
zxAnBrgIfH15MInMcastPkts Counter64,
|
|
zxAnBrgIfH15MInBcastPkts Counter64,
|
|
zxAnBrgIfH15MOutOctets Counter64,
|
|
zxAnBrgIfH15MOutUcastPkts Counter64,
|
|
zxAnBrgIfH15MOutMcastPkts Counter64,
|
|
zxAnBrgIfH15MOutBcastPkts Counter64
|
|
}
|
|
|
|
zxAnBrgIfH15MIntervalNo OBJECT-TYPE
|
|
SYNTAX Integer32(1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number 1 is the the most recent
|
|
previous interval; interval 96 is 24 hours ago.
|
|
Intervals 2..96 are optional."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 1 }
|
|
|
|
zxAnBrgIfH15MIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data valid flag.
|
|
true(1) means valid.
|
|
false(2) means invalidm and the performace data is useless."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 2 }
|
|
|
|
zxAnBrgIfH15MDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 15 minutes interval performance data generation time."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 3 }
|
|
|
|
zxAnBrgIfH15MInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in current 15 historical interval."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 4 }
|
|
|
|
zxAnBrgIfH15MInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were not addressed to a multicast
|
|
or broadcast address at this sub-layer and in historical 15
|
|
minutes interval."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 5 }
|
|
|
|
zxAnBrgIfH15MInMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer and in historical 15 minutes
|
|
interval.For a MAC layer protocol, this includes both
|
|
Group and Functional addresses."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 6 }
|
|
|
|
zxAnBrgIfH15MInBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a broadcast
|
|
address at this sub-layer and in historical 15 minutes interval."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 7 }
|
|
|
|
zxAnBrgIfH15MOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters in historical 15 minutes interval."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 8 }
|
|
|
|
zxAnBrgIfH15MOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were not addressed to a
|
|
multicast or broadcast address at this sub-layer, including
|
|
those that were discarded or not sent in historical 15 minutes
|
|
interval."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 9 }
|
|
|
|
zxAnBrgIfH15MOutMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
multicast address at this sub-layer, including those that
|
|
were discarded or not sent and in historical 15 minutes
|
|
interval.For a MAC layer protocol, this includes both Group
|
|
and Functional addresses."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 10 }
|
|
|
|
zxAnBrgIfH15MOutBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
broadcast address at this sub-layer, including those that
|
|
were discarded or not sent in 15 historical minutes interval."
|
|
::= { zxAnBrgIfHis15MinPerfEntry 11 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 4. zxAnBrgIfHis1DayPerfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnBrgIfHis1DayPerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnBrgIfHis1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval history performance data table of the bridge
|
|
interfaces."
|
|
::= { zxAnBrgIfPerfObjects 5 }
|
|
|
|
zxAnBrgIfHis1DayPerfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnBrgIfHis1DayPerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data entry of the bridge
|
|
interfaces."
|
|
INDEX { ifIndex,zxAnBrgIfH1DIntervalNo }
|
|
::= { zxAnBrgIfHis1DayPerfTable 1 }
|
|
|
|
ZxAnBrgIfHis1DayPerfEntry ::= SEQUENCE {
|
|
zxAnBrgIfH1DIntervalNo Integer32,
|
|
zxAnBrgIfH1DIntervalValidData TruthValue,
|
|
zxAnBrgIfH1DDateTime DateAndTime,
|
|
zxAnBrgIfH1DInOctets Counter64,
|
|
zxAnBrgIfH1DInUcastPkts Counter64,
|
|
zxAnBrgIfH1DInMcastPkts Counter64,
|
|
zxAnBrgIfH1DInBcastPkts Counter64,
|
|
zxAnBrgIfH1DOutOctets Counter64,
|
|
zxAnBrgIfH1DOutUcastPkts Counter64,
|
|
zxAnBrgIfH1DOutMcastPkts Counter64,
|
|
zxAnBrgIfH1DOutBcastPkts Counter64
|
|
}
|
|
|
|
zxAnBrgIfH1DIntervalNo OBJECT-TYPE
|
|
SYNTAX Integer32(1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number 1 is the the most recent
|
|
previous interval; interval 7 is 1 week ago.
|
|
Intervals 2..7 are optional."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 1 }
|
|
|
|
zxAnBrgIfH1DIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data valid flag.
|
|
true(1) means valid.
|
|
false(2) means invalidm and the performace data is useless."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 2 }
|
|
|
|
zxAnBrgIfH1DDateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 1 day interval performance data generation time."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 3 }
|
|
|
|
zxAnBrgIfH1DInOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in historical one day interval."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 4 }
|
|
|
|
zxAnBrgIfH1DInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets received on the interface,
|
|
including framing characters in historical one day interval."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 5 }
|
|
|
|
zxAnBrgIfH1DInMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a multicast
|
|
address at this sub-layer and in historical one day interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 6 }
|
|
|
|
zxAnBrgIfH1DInBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets, delivered by this sub-layer to a
|
|
higher (sub-)layer, which were addressed to a broadcast
|
|
address at this sub-layer and in historical one day interval."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 7 }
|
|
|
|
zxAnBrgIfH1DOutOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the interface,
|
|
including framing characters in historical one day interval."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 8 }
|
|
|
|
zxAnBrgIfH1DOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were not addressed to a
|
|
multicast or broadcast address at this sub-layer, including
|
|
those that were discarded or not sent in historical one day
|
|
interval."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 9 }
|
|
|
|
zxAnBrgIfH1DOutMcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
multicast address at this sub-layer, including those that
|
|
were discarded or not sent and in historical one day interval.
|
|
For a MAC layer protocol, this includes both Group and
|
|
Functional addresses."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 10 }
|
|
|
|
zxAnBrgIfH1DOutBcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level protocols
|
|
requested be transmitted, and which were addressed to a
|
|
broadcast address at this sub-layer, including those that
|
|
were discarded or not sent in historical one day interval."
|
|
::= { zxAnBrgIfHis1DayPerfEntry 11 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 5. zxAnBrgIfAlmProfileConfTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnBrgIfAlmProfileConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnBrgIfAlmProfileConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile table of the bridge
|
|
interfaces."
|
|
::= { zxAnBrgIfPerfObjects 6 }
|
|
|
|
zxAnBrgIfAlmProfileConfEntry OBJECT-TYPE
|
|
SYNTAX ZxAnBrgIfAlmProfileConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile table of the bridge
|
|
interfaces.These variables in the profile configuration is optional,
|
|
if not configured, it means the correspongding alarm is not
|
|
reported, but the alarm and clear alarm threshold configuration is
|
|
needed to bind. "
|
|
INDEX { zxAnBrgIfAlmProfileName, zxAnBrgIfPerfVariable }
|
|
::= { zxAnBrgIfAlmProfileConfTable 1 }
|
|
|
|
ZxAnBrgIfAlmProfileConfEntry ::= SEQUENCE {
|
|
zxAnBrgIfAlmProfileName DisplayString,
|
|
zxAnBrgIfPerfVariable OBJECT IDENTIFIER,
|
|
zxAnBrgIfRiseAlmThresh HCPerfCurrentCount,
|
|
zxAnBrgIfClrRiseAlmThresh HCPerfCurrentCount,
|
|
zxAnBrgIfRiseWarnThresh HCPerfCurrentCount,
|
|
zxAnBrgIfClrRiseWarnThresh HCPerfCurrentCount,
|
|
zxAnBrgIfFallWarnThresh HCPerfCurrentCount,
|
|
zxAnBrgIfClrFallWarnThresh HCPerfCurrentCount,
|
|
zxAnBrgIfFallAlmThresh HCPerfCurrentCount,
|
|
zxAnBrgIfClrFallAlmThresh HCPerfCurrentCount,
|
|
zxAnBrgIfThreshUsed BITS,
|
|
zxAnBrgIfAlmProfileConfRowStatus RowStatus
|
|
}
|
|
|
|
zxAnBrgIfAlmProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The profile name."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 1 }
|
|
|
|
zxAnBrgIfPerfVariable OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of performance variables."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 2 }
|
|
|
|
zxAnBrgIfRiseAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising alarm."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 3 }
|
|
|
|
zxAnBrgIfClrRiseAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising alarm restore."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 4 }
|
|
|
|
zxAnBrgIfRiseWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising warning."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 5 }
|
|
|
|
zxAnBrgIfClrRiseWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for rising warning restore."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 6 }
|
|
|
|
zxAnBrgIfFallWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling warning."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 7 }
|
|
|
|
zxAnBrgIfClrFallWarnThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling warning restore."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 8 }
|
|
|
|
zxAnBrgIfFallAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling alarm."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 9 }
|
|
|
|
zxAnBrgIfClrFallAlmThresh OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold for falling alarm restore."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 10 }
|
|
|
|
zxAnBrgIfThreshUsed OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
riseAlmThresh(0),
|
|
riseAlmClrThresh(1),
|
|
riseWarnThresh(2),
|
|
riseWarnClrThresh(3),
|
|
fallWarnThresh(4),
|
|
fallWarnClrThresh(5),
|
|
fallAlmThresh(6),
|
|
fallAlmClrThresh(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold used flag."
|
|
::= { zxAnBrgIfAlmProfileConfEntry 11 }
|
|
|
|
zxAnBrgIfAlmProfileConfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
To create a row in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a row in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnBrgIfAlmProfileConfEntry 50 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 6. zxAnBrgIfAlmProfileApplyTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnBrgIfAlmProfileApplyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnBrgIfAlmProfileApplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile configuration table of
|
|
the bridge interfaces."
|
|
::= { zxAnBrgIfPerfObjects 7 }
|
|
|
|
zxAnBrgIfAlmProfileApplyEntry OBJECT-TYPE
|
|
SYNTAX ZxAnBrgIfAlmProfileApplyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile configuration entry of
|
|
the bridge interfaces."
|
|
INDEX { ifIndex }
|
|
::= { zxAnBrgIfAlmProfileApplyTable 1 }
|
|
|
|
ZxAnBrgIfAlmProfileApplyEntry ::= SEQUENCE {
|
|
zxAnBrgIfAlmPrf DisplayString,
|
|
zxAnBrgIfAlmPrfApplyRowStatus RowStatus
|
|
}
|
|
|
|
zxAnBrgIfAlmPrf OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile."
|
|
::= { zxAnBrgIfAlmProfileApplyEntry 1 }
|
|
|
|
zxAnBrgIfAlmPrfApplyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
To create a row in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a row in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnBrgIfAlmProfileApplyEntry 50 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 7. zxAnBrgIfAlmProfileTable
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnBrgIfAlmProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnBrgIfAlmProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile table of the bridge
|
|
interfaces. It can be used to delete all of the performance alarm
|
|
threshold profiles which has the same name configured in
|
|
'zxAnBrgIfAlmProfileConfTable'."
|
|
::= { zxAnBrgIfPerfObjects 8 }
|
|
|
|
zxAnBrgIfAlmProfileEntry OBJECT-TYPE
|
|
SYNTAX ZxAnBrgIfAlmProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The performance alarm threshold profile entry of the bridge
|
|
interfaces."
|
|
INDEX { zxAnBrgIfAlmProfileName}
|
|
::= { zxAnBrgIfAlmProfileTable 1 }
|
|
|
|
ZxAnBrgIfAlmProfileEntry ::= SEQUENCE {
|
|
zxAnBrgIfAlmProfileRowStatus RowStatus
|
|
}
|
|
|
|
zxAnBrgIfAlmProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row.
|
|
|
|
To create a profile in this table, a manager must
|
|
set this object to createAndGo(4).
|
|
|
|
To delete a profile in this table, a manager must
|
|
set this object to destroy(6). "
|
|
::= { zxAnBrgIfAlmProfileEntry 50 }
|
|
|
|
--------------------------------------------------------------------------------
|
|
-- 31. zxAnBrgIfPerfConformance
|
|
--------------------------------------------------------------------------------
|
|
|
|
zxAnBrgIfPerfConformance OBJECT IDENTIFIER
|
|
::= { zxAnInterfaceBrgPerfMib 4 }
|
|
|
|
zxAnBrgIfPerfCompliances OBJECT IDENTIFIER
|
|
::= { zxAnBrgIfPerfConformance 1 }
|
|
zxAnBrgIfPerfGroups OBJECT IDENTIFIER
|
|
::= { zxAnBrgIfPerfConformance 2 }
|
|
|
|
zxAnBrgIfPerfCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
ZTE-AN-INTERFACE-BRG-PERF-MIB."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
zxAnBrgIfPerfCurr15MinGroup,
|
|
zxAnBrgIfPerfCurr1DayGroup,
|
|
zxAnBrgIfPerfHis15MinGroup,
|
|
zxAnBrgIfPerfHis1DayGroup,
|
|
zxAnBrgIfPerfAlmProfileGroup
|
|
}
|
|
::= { zxAnBrgIfPerfCompliances 1 }
|
|
|
|
-- Units of compliance
|
|
|
|
zxAnBrgIfPerfCurr15MinGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnBrgIfC15MTimeElapsed,
|
|
zxAnBrgIfC15MInOctets,
|
|
zxAnBrgIfC15MInUcastPkts,
|
|
zxAnBrgIfC15MInMcastPkts,
|
|
zxAnBrgIfC15MInBcastPkts,
|
|
zxAnBrgIfC15MOutOctets,
|
|
zxAnBrgIfC15MOutUcastPkts,
|
|
zxAnBrgIfC15MOutMcastPkts,
|
|
zxAnBrgIfC15MOutBcastPkts,
|
|
zxAnBrgIfC15MReset
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for 15 minutes interval
|
|
performance data of interfaces."
|
|
::= { zxAnBrgIfPerfGroups 1 }
|
|
|
|
zxAnBrgIfPerfCurr1DayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnBrgIfC1DTimeElapsed,
|
|
zxAnBrgIfC1DInOctets,
|
|
zxAnBrgIfC1DInUcastPkts,
|
|
zxAnBrgIfC1DInMcastPkts,
|
|
zxAnBrgIfC1DInBcastPkts,
|
|
zxAnBrgIfC1DOutOctets,
|
|
zxAnBrgIfC1DOutUcastPkts,
|
|
zxAnBrgIfC1DOutMcastPkts,
|
|
zxAnBrgIfC1DOutBcastPkts,
|
|
zxAnBrgIfC1DReset
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing 1 day interval performance data
|
|
of interfaces."
|
|
::= { zxAnBrgIfPerfGroups 2 }
|
|
|
|
zxAnBrgIfPerfHis15MinGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnBrgIfH15MIntervalValidData,
|
|
zxAnBrgIfH15MDateTime,
|
|
zxAnBrgIfH15MInOctets,
|
|
zxAnBrgIfH15MInUcastPkts,
|
|
zxAnBrgIfH15MInMcastPkts,
|
|
zxAnBrgIfH15MInBcastPkts,
|
|
zxAnBrgIfH15MOutOctets,
|
|
zxAnBrgIfH15MOutUcastPkts,
|
|
zxAnBrgIfH15MOutMcastPkts,
|
|
zxAnBrgIfH15MOutBcastPkts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for 15 minutes interval
|
|
performance data of interfaces."
|
|
::= { zxAnBrgIfPerfGroups 3 }
|
|
|
|
zxAnBrgIfPerfHis1DayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnBrgIfH1DIntervalValidData,
|
|
zxAnBrgIfH1DDateTime,
|
|
zxAnBrgIfH1DInOctets,
|
|
zxAnBrgIfH1DInUcastPkts,
|
|
zxAnBrgIfH1DInMcastPkts,
|
|
zxAnBrgIfH1DInBcastPkts,
|
|
zxAnBrgIfH1DOutOctets,
|
|
zxAnBrgIfH1DOutUcastPkts,
|
|
zxAnBrgIfH1DOutMcastPkts,
|
|
zxAnBrgIfH1DOutBcastPkts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing 1 day interval performance data
|
|
of interfaces."
|
|
::= { zxAnBrgIfPerfGroups 4 }
|
|
|
|
zxAnBrgIfPerfAlmProfileGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnBrgIfRiseAlmThresh,
|
|
zxAnBrgIfClrRiseAlmThresh,
|
|
zxAnBrgIfRiseWarnThresh,
|
|
zxAnBrgIfClrRiseWarnThresh,
|
|
zxAnBrgIfFallWarnThresh,
|
|
zxAnBrgIfClrFallWarnThresh,
|
|
zxAnBrgIfFallAlmThresh,
|
|
zxAnBrgIfClrFallAlmThresh,
|
|
zxAnBrgIfThreshUsed,
|
|
zxAnBrgIfAlmProfileConfRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for performance alarm threshold
|
|
profile of interfaces."
|
|
::= { zxAnBrgIfPerfGroups 5 }
|
|
|
|
zxAnBrgIfAlmProfileApplyGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnBrgIfAlmPrf,
|
|
zxAnBrgIfAlmPrfApplyRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for performance alarm threshold
|
|
profile apply control configuration information."
|
|
::= { zxAnBrgIfPerfGroups 6 }
|
|
|
|
zxAnBrgIfAlmProfileGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnBrgIfAlmProfileRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing for performance alarm threshold
|
|
profile configuration information."
|
|
::= { zxAnBrgIfPerfGroups 7 }
|
|
END |