Observium_CE/mibs/zhone/ZHONE-INTERFACE-TRANSLATION-MIB

1176 lines
45 KiB
Plaintext

--
-- genIntfTranslationTable.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285
-- Thursday, February 24, 2011 at 01:43:03
--
ZHONE-INTERFACE-TRANSLATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
IANAifType
FROM IANAifType-MIB
ifEntry, InterfaceIndex
FROM IF-MIB
Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TruthValue
FROM SNMPv2-TC
zhoneInterfaceTranslation, zhoneShelfIndex, zhoneSlotIndex, zhoneModules, zhoneShelfIndex,
zhoneSlotIndex
FROM Zhone
ZhoneShelfValue, ZhoneSlotValue, ZhoneRowStatus, ZhoneIfType
FROM Zhone-TC;
-- NOTE: The markup for the If_Translate_Record also includes three fields that
-- are defined in rfc2233.mib.
--
-- This markup creates the interface translation record. It is indexed by ifIndex.
--
-- ZHONE_KEYWORD_MODULE_NAME = (If_Translate_Record, ifTranslateProfile)
-- ZHONE_KEYWORD_PROFILE_LABEL = if-translate
-- ZHONE_KEYWORD_PROFILE_GROUP = "/interface { ifTranslate, LABEL } / ifIndex { ifIndex, INDEX }"
-- ZHONE_KEYWORD_STORAGE_RECORD = If_Translate_Record
-- ZHONE_KEYWORD_STORAGE_GROUP = "/ifIndex {LIST}"
-- ZHONE_KEYWORD_STORAGE_CLASS = PERSISTENT
-- ZHONE_KEYWORD_ACCESS_GROUP = ( INTERFACE )
-- ZHONE_KEYWORD_FEATURE_FLAGS = ( ZHONE_INFRA )
--
-- This markup creates the interface configuration defaults table. It is indexed
-- by card type and interface type.
--
-- ZHONE_KEYWORD_MODULE_NAME = (If_Default_Record, ifDefaultProfile)
-- ZHONE_KEYWORD_PROFILE_LABEL = if-default
-- ZHONE_KEYWORD_PROFILE_GROUP = "/interface { ifDefault, LABEL } / ifIndex { ifIndex, INDEX }"
-- ZHONE_KEYWORD_STORAGE_RECORD = If_Default_Record
-- ZHONE_KEYWORD_STORAGE_GROUP = "/ifCardType {LIST} /ifTypeUpper {LIST} /ifTypeLower {LIST}"
-- ZHONE_KEYWORD_STORAGE_CLASS = PERSISTENT
-- ZHONE_KEYWORD_ACCESS_GROUP = ( INTERFACE )
-- ZHONE_KEYWORD_FEATURE_FLAGS = ( ZHONE_INFRA )
--
-- ZHONE_KEYWORD_MODULE_NAME = (Description_Profile, descriptionProfile)
-- ZHONE_KEYWORD_PROFILE_LABEL = description
-- ZHONE_KEYWORD_PROFILE_GROUP = "/system { descriptionIndex, INDEX }"
-- ZHONE_KEYWORD_STORAGE_RECORD = Description_Profile
-- ZHONE_KEYWORD_STORAGE_GROUP = "/descriptionIndex {LIST}"
-- ZHONE_KEYWORD_STORAGE_CLASS = PERSISTENT
-- ZHONE_KEYWORD_ACCESS_GROUP = ( INTERFACE )
-- ZHONE_KEYWORD_FEATURE_FLAGS = ( ZHONE_INFRA )
-- 1.3.6.1.4.1.5504.6.6
zhoneInterfaceTrans MODULE-IDENTITY
LAST-UPDATED "201102241138Z" -- February 24, 2011 at 11:38 GMT
ORGANIZATION
"Zhone Technologies, Inc."
CONTACT-INFO
" Postal:
Zhone Technologies, Inc.
@ Zhone Way
7001 Oakport Street
Oakland, CA 94621
USA
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
Tel: +1-510-777-7000
Fax: +1-510-777-7001
E-mail: support@zhone.com"
DESCRIPTION
"Defines translation tables that provide the translation
to and from shelf/slot/port/subport <-> interface number.
Both table are created whenever an ifIndex is created. The
ifStackDefaultTable is used to provide a roadmap of stack
bindings, and to supply default ifAdminStatus values for new
rows of the ifTable."
REVISION "201102240138Z" -- February 24, 2011 at 01:38 GMT
DESCRIPTION
"Changed the range of field redundancyParam1 -2147483648 to 2147483647"
REVISION "201004091504Z" -- April 09, 2010 at 15:04 GMT
DESCRIPTION
"Add lineRedTraps"
REVISION "201004021429Z" -- April 02, 2010 at 14:29 GMT
DESCRIPTION
"Renamed 'ifType' to 'xxxifTypexxx' since ZMS can
accidentaly compile in this deprecated object
instead of MIB2 'ifType' object."
REVISION "201003101119Z" -- March 10, 2010 at 11:19 GMT
DESCRIPTION
"Add zhoneLineRedStatusTable
Document redundancyParam1"
REVISION "200809282315Z" -- September 28, 2008 at 23:15 GMT
DESCRIPTION
"V01.01.05 - Add zhoneDescriptionTable.
Add zhoneIfXDescriptionIndex.
Add zhoneIfXDescriptionIndexNext."
REVISION "200701261823Z" -- January 26, 2007 at 18:23 GMT
DESCRIPTION
"V01.01.04 - add shelf, slot, port and
subport aliases to zhoneIfXEntry to allow
user to create physical if-translate record."
REVISION "200405261553Z" -- May 26, 2004 at 15:53 GMT
DESCRIPTION
"V01.01.03 - add redundancyParam1."
REVISION "200106281307Z" -- June 28, 2001 at 13:07 GMT
DESCRIPTION
"V01.01.02 - fix the 17 slot limit problem"
REVISION "200105231102Z" -- May 23, 2001 at 11:02 GMT
DESCRIPTION
"V01.01.01 - Deprecated physicalToIfIndexTable and
replaced it with zhonePhysicalToIfIndexTable."
REVISION "200105111525Z" -- May 11, 2001 at 15:25 GMT
DESCRIPTION
"V01.01.00 - Added physicalFlag and ifTypeExtension records"
REVISION "200009201200Z" -- September 20, 2000 at 12:00 GMT
DESCRIPTION
"V01.00.01 - Added markup for Physical-to-IfIndex Record"
REVISION "200009121111Z" -- September 12, 2000 at 11:11 GMT
DESCRIPTION
"V01.00.00 - Initial Release"
::= { zhoneModules 6 }
--
-- Node definitions
--
-- 1.3.6.1.4.1.5504.3.5.1
ifIndexNext OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the next available ifIndex."
::= { zhoneInterfaceTranslation 1 }
-- 1.3.6.1.4.1.5504.3.5.2
physicalToIfIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhysicalToIfIndexEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table to translate from shelf/slot/physical port/subport
to the interface number (zhoneIfIndex). The physical
port is the port number on the card selected by
shelf/slot. The role of subport may vary depending on
the card type, but is included to allow maximum
flexibility and future exhancements.
This table has been replaced by a zhonePhysicalToIfIndexTable.
The objects in this table have been replaced by zhonePortIndex,
zhoneSubPortIndex, zhonePhysicalIfIndex, zhoneIfType, and
zhoneIfTypeExtension."
::= { zhoneInterfaceTranslation 2 }
-- 1.3.6.1.4.1.5504.3.5.2.1
physicalToIfIndexEntry OBJECT-TYPE
SYNTAX PhysicalToIfIndexEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The physical table is indexed by shelf/slot/physical port
/subport. In instances where there is no subport the
value of subport should be set to zero.
This entry has been replaced by zhonePhysicalToIfIndexEntry."
INDEX { zhoneShelfIndex, zhoneSlotIndex, pportIndex, subPortIndex }
::= { physicalToIfIndexTable 1 }
PhysicalToIfIndexEntry ::=
SEQUENCE {
pportIndex
Integer32,
subPortIndex
Integer32,
zhoneIfIndex
InterfaceIndex,
xxxifTypexxx
IANAifType
}
-- 1.3.6.1.4.1.5504.3.5.2.1.1
pportIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The port number of the physical port on the card or
device. The numbering should start at 1 for the first
port on the device and proceed sequentially.
This object has been replaced by zhonePortIndex."
::= { physicalToIfIndexEntry 1 }
-- 1.3.6.1.4.1.5504.3.5.2.1.2
subPortIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This entry provides flexibility to define more than one
interface on a port. The most common use of subport will
be to handle structured TDM lines allowing for example an
interface number to be assign to each DS1 in a DS3.
Subport may also be used to handle other situations where
a physical port contains more than one inetrface. This
object has replaced by zhoneSubPortIndex."
::= { physicalToIfIndexEntry 2 }
-- 1.3.6.1.4.1.5504.3.5.2.1.3
zhoneIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The interface number of the pport or pport/subport that
uniquely identifies the interface across the system.
This object has been replaced by zhonePhysicalIfIndex."
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2"
::= { physicalToIfIndexEntry 3 }
-- 1.3.6.1.4.1.5504.3.5.2.1.4
xxxifTypexxx OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of interface. Additional values for ifType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual convention.
This object has replaced by zhoneIfType.
"
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2"
::= { physicalToIfIndexEntry 4 }
-- 1.3.6.1.4.1.5504.3.5.3
ifIndexToPhysicalTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfIndexToPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to translate from interface number (zhoneIfIndex)
to the physical location and port (including subport
where defined).
zhoneShelfNumber is the number of the shelf on which the
port is located and can have a value from 1-255,
zhoneSlotNumber is the card slot on which card with the
physical port is located and currently has a value of
1-18.
The pportNumber identifies the specific physical
port on the card beginning with port 1.
subPortNumber issued to define multiple interfaces on
a port as required, if the identified port has a single
interface number, subport will be set to zero.
"
::= { zhoneInterfaceTranslation 3 }
-- 1.3.6.1.4.1.5504.3.5.3.1
ifIndexToPhysicalEntry OBJECT-TYPE
SYNTAX IfIndexToPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is indexed by the zhoneIfidndex of the
desired interface."
INDEX { zhoneIfIndex }
::= { ifIndexToPhysicalTable 1 }
IfIndexToPhysicalEntry ::=
SEQUENCE {
zhoneShelfNumber
ZhoneShelfValue,
zhoneSlotNumber
ZhoneSlotValue,
pportNumber
Integer32,
subPortNumber
Integer32,
ifaceType
IANAifType,
ifaceTypeExtension
ZhoneIfType
}
-- ZHONE_KEYWORD_PROFILE_LABEL = shelf
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.shelf
-- ZHONE_KEYWORD_STORAGE_ORDER = 2
-- 1.3.6.1.4.1.5504.3.5.3.1.1
zhoneShelfNumber OBJECT-TYPE
SYNTAX ZhoneShelfValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The zhoneShelfNumber is the physical address or number of
the shelf for the desired interface. A Zhone system is
limited to a maximum of 255 shelves. The first shelf in
a system is shelf 1, "
::= { ifIndexToPhysicalEntry 1 }
-- ZHONE_KEYWORD_PROFILE_LABEL = slot
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.slot
-- ZHONE_KEYWORD_STORAGE_ORDER = 3
--
-- 1.3.6.1.4.1.5504.3.5.3.1.2
zhoneSlotNumber OBJECT-TYPE
SYNTAX ZhoneSlotValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The zhoneSlotNumber is the physical slot number on which
the card containing the port or interface is located.
Zhone shelves are currently limited to 30 slots numbered
1-30.
Note that daughter boards do not have slot numbers."
::= { ifIndexToPhysicalEntry 2 }
-- 1.3.6.1.4.1.5504.3.5.3.1.3
pportNumber OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pportNumber defines the phyiscal port number on the
selected shelf/slot (card). Port numbering begins with
port 1 and ports are numbered sequentially. pportNumber
0 is invalid unless the ifIndex is for an interface that
is not bound to a physical port."
::= { ifIndexToPhysicalEntry 3 }
-- 1.3.6.1.4.1.5504.3.5.3.1.4
subPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subPortNumber is used to identify multiple logical
ports on a physical that require their own interface
number, e.g. DS1s on a DS3 port.
Note that multiple protocol layers such as IP over ATM
do not require unique interface numbers and are handled
by the standard ifStackTable mechanism.
Subport 0 is reserved to designate that a physical port
has no subport and hence a single interface number.
"
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2"
::= { ifIndexToPhysicalEntry 4 }
-- 1.3.6.1.4.1.5504.3.5.3.1.5
ifaceType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of interface. Additional values for ifType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual convention."
::= { ifIndexToPhysicalEntry 5 }
-- 1.3.6.1.4.1.5504.3.5.3.1.6
ifaceTypeExtension OBJECT-TYPE
SYNTAX ZhoneIfType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is used to specify the zhone-proprietary
interface type when necessary. For example, if the
interface is a line-group, iftype is set to 'IANAIFTYPE_OTHER'
and ifTypeExtension is set to 'ZHONEIFTYPE_LINEGROUP'.
By default ifTypeExtension is set to 'ZHONEIFTYPE_NONE(0)'."
::= { ifIndexToPhysicalEntry 6 }
-- 1.3.6.1.4.1.5504.3.5.4
ifStackDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfStackDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the default ifTable vales and
stack arrangements (bindings) and unit numbers based on
types of cards and ifTypes."
::= { zhoneInterfaceTranslation 4 }
-- 1.3.6.1.4.1.5504.3.5.4.1
ifStackDefaultEntry OBJECT-TYPE
SYNTAX IfStackDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the unit/card type, the ifType of
the 'from' layer (ifStkDefUpperIfType) and the ifType
of the 'to' layer (ifStkDefLowerIfType) and the number
of units for each association.
Also the Default value ifAdminStatus in ifTable.
A value must be supplied for all fields except ifStkDefAdminStatus
to create a new row."
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2"
INDEX { ifStkDefUpperType, ifStkDefLowerType, ifStkDefCardType }
::= { ifStackDefaultTable 1 }
IfStackDefaultEntry ::=
SEQUENCE {
ifStkDefCardType
Integer32,
ifStkDefUpperType
IANAifType,
ifStkDefLowerType
IANAifType,
ifStkDefUnits
Integer32,
ifStkDefAdminStatus
INTEGER,
ifStkDefRowStatus
ZhoneRowStatus
}
-- ZHONE_KEYWORD_PROFILE_LABEL = cardtype
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Default_Record.cardType
-- ZHONE_KEYWORD_STORAGE_ORDER = 1
-- 1.3.6.1.4.1.5504.3.5.4.1.1
ifStkDefCardType OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The numerical representation of unit/card type as specified in
zhoneCardResourcesModule where cardZhoneType has the following
defined values: unknownType(1), interShelf(2), infoServices(3),
hdsl2(10),sechtor100(1001),zedge64(2001), and zplex10(3001). Other
values may be used.
"
::= { ifStackDefaultEntry 1 }
-- ZHONE_KEYWORD_PROFILE_LABEL = upperiftype
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Default_Record.upperIfType
-- ZHONE_KEYWORD_STORAGE_ORDER = 2
-- 1.3.6.1.4.1.5504.3.5.4.1.2
ifStkDefUpperType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifType corresponding to the higher
sublayer of the relationship, i.e., the sublayer that
runs on top of the sublayer identified by the
corresponding instance of ifStkDefLowerType."
::= { ifStackDefaultEntry 2 }
-- ZHONE_KEYWORD_PROFILE_LABEL = loweriftype
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Default_Record.lowerIfType
-- ZHONE_KEYWORD_STORAGE_ORDER = 3
-- 1.3.6.1.4.1.5504.3.5.4.1.3
ifStkDefLowerType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifType corresponding to the default lower
sublayer of the relationship, i.e., the sublayer that
runs under the sublayer identified by the
corresponding instance of ifStkDefUpperType."
::= { ifStackDefaultEntry 3 }
-- ZHONE_KEYWORD_PROFILE_LABEL = numunits
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Default_Record.numUnits
-- ZHONE_KEYWORD_STORAGE_ORDER = 4
-- 1.3.6.1.4.1.5504.3.5.4.1.4
ifStkDefUnits OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "count"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of units for this association which indicates the number of
ifindexes created for this particular iftype pair on this card type
such as 48 creations for the initial version of the HDSL2 card.
"
::= { ifStackDefaultEntry 4 }
-- ZHONE_KEYWORD_PROFILE_LABEL = adminStatus
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Default_Record.adminStatus
-- ZHONE_KEYWORD_STORAGE_ORDER = 5
-- 1.3.6.1.4.1.5504.3.5.4.1.5
ifStkDefAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Default value for ifAdminStatus in ifTable for the UPPPER ifindex
associated with the ifStkDefUpperType."
DEFVAL { down }
::= { ifStackDefaultEntry 5 }
-- 1.3.6.1.4.1.5504.3.5.4.1.6
ifStkDefRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status used to create and/or remove rows from this table."
::= { ifStackDefaultEntry 6 }
-- 1.3.6.1.4.1.5504.3.5.5
ifInverseStackTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfInverseStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This is the inverse ifstacktable in that the index
scheme is lower.higher as opposed to higher.lower as
defined in rfc2233. Comments and information is
copied here for clarity.
Information on a particular relationship between two
sub-layers, specifying that one sub-layer runs on
'top' of the other sub-layer. Each sub-layer
corresponds to a conceptual row in the ifTable.
Use of this table is solely for management stations
to walk the table (getnext) from the lower
physical port (ifindex) up the stack."
::= { zhoneInterfaceTranslation 5 }
-- 1.3.6.1.4.1.5504.3.5.5.1
ifInverseStackEntry OBJECT-TYPE
SYNTAX IfInverseStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information on the relationships
between the multiple sub-layers of network interfaces.
In particular, it contains information on which sub-
layers run 'on top of' which other sub-layers, where
each sub-layer corresponds to a conceptual row in the
ifTable. For example, when the sub-layer with ifIndex
value x runs over the sub-layer with ifIndex value y,
then this table contains:
ifStackStatus.y.x=active
For each ifIndex value, I, which identifies an active
interface, there are always at least two instantiated
rows in this table associated with I. For one of
these rows, I is the value of ifStackHigherLayer; for
the other, I is the value of ifStackLowerLayer. (If I
is not involved in multiplexing, then these are the
only two rows associated with I.)
For example, two rows exist even for an interface
which has no others stacked on top or below it:
ifStackStatus.0.x=active
ifStackStatus.x.0=active
A corresponding entry in this mib is made whenever an
entry is made in the standard ifStackTable. Thus,
deletion, creation, and modification is not possible on
this table."
INDEX { ifInverseStackLowerLayer, ifInverseStackHigherLayer }
::= { ifInverseStackTable 1 }
IfInverseStackEntry ::=
SEQUENCE {
ifInverseStackLowerLayer
InterfaceIndex,
ifInverseStackHigherLayer
InterfaceIndex,
ifInverseStackStatus
INTEGER
}
-- 1.3.6.1.4.1.5504.3.5.5.1.1
ifInverseStackLowerLayer OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex corresponding to the lower sub-
layer of the relationship, i.e., the sub-layer which
runs 'below' the sub-layer identified by the
corresponding instance of ifInverseStackHigherLayer. If
there is no lower sub-layer, then this object has the
value 0.
"
::= { ifInverseStackEntry 1 }
-- 1.3.6.1.4.1.5504.3.5.5.1.2
ifInverseStackHigherLayer OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of ifIndex corresponding to the higher
sub-layer of the relationship, i.e., the sub-layer
which runs on 'top' of the sub-layer identified by the
corresponding instance of ifStackLowerLayer. If there
is no higher sub-layer (below the internetwork layer),
then this object has the value 0.
"
::= { ifInverseStackEntry 2 }
-- 1.3.6.1.4.1.5504.3.5.5.1.3
ifInverseStackStatus OBJECT-TYPE
SYNTAX INTEGER { active(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of this entry. If the entry
exists, this value must be 1."
::= { ifInverseStackEntry 3 }
-- 1.3.6.1.4.1.5504.3.5.6
zhoneIfXTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneIfXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains additional objects for the interface table.
Each row corresponds to a conceptual row in the ifTable."
::= { zhoneInterfaceTranslation 6 }
-- 1.3.6.1.4.1.5504.3.5.6.1
zhoneIfXEntry OBJECT-TYPE
SYNTAX ZhoneIfXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional management information
applicable to a particular interface."
AUGMENTS { ifEntry }
::= { zhoneIfXTable 1 }
ZhoneIfXEntry ::=
SEQUENCE {
physicalFlag
TruthValue,
ifTypeExtension
ZhoneIfType,
redundancyParam1
Integer32,
zhoneIfXEntryIfTypeAlias
IANAifType,
zhoneIfXEntryRowStatus
ZhoneRowStatus,
zhoneIfXEntryShelfAlias
Integer32,
zhoneIfXEntrySlotAlias
Integer32,
zhoneIfXEntryPortAlias
Integer32,
zhoneIfXEntrySubportAlias
Integer32,
zhoneIfXDescriptionIndex
Integer32
}
-- ZHONE_KEYWORD_PROFILE_LABEL = physical-flag
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.physicalFlag
-- ZHONE_KEYWORD_STORAGE_ORDER = 8
--
-- 1.3.6.1.4.1.5504.3.5.6.1.1
physicalFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag is set to 'true(1)' if the ifIndex
represents the physical layer. Otherwise the
flag is set to 'false(2)'."
DEFVAL { false }
::= { zhoneIfXEntry 1 }
-- ZHONE_KEYWORD_PROFILE_LABEL = iftype-extension
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.ifTypeExtension
-- ZHONE_KEYWORD_STORAGE_ORDER = 9
--
-- 1.3.6.1.4.1.5504.3.5.6.1.2
ifTypeExtension OBJECT-TYPE
SYNTAX ZhoneIfType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used to specify the zhone-proprietary
interface type when necessary. For example, if the
interface is a line-group, iftype is set to 'IANAIFTYPE_OTHER'
and ifTypeExtension is set to 'ZHONEIFTYPE_LINEGROUP'.
By default ifTypeExtension is set to 'ZHONEIFTYPE_NONE(0)'."
::= { zhoneIfXEntry 2 }
-- ZHONE_KEYWORD_PROFILE_LABEL = redundancy-param1
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.redundancyParam1
-- ZHONE_KEYWORD_STORAGE_ORDER = 11
--
-- 1.3.6.1.4.1.5504.3.5.6.1.3
redundancyParam1 OBJECT-TYPE
SYNTAX Integer32 (-2147483648..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For linegroups, this value contains information
about line redundancy as follows:
0x8000 bit set => switchover on failure
0x7FFF number of seconds to wait before switchover
0x40000000 bit set => revert after switchover
0x3FFF0000 these 4 bits contains the number of seconds
to wait before reverting
0x80000000 bit set => disable transmit on standby
For physical interfaces:
0x00000001 bit set => secondary member of a
protection pair
bit clear => primary member, or standalone"
::= { zhoneIfXEntry 3 }
-- 1.3.6.1.4.1.5504.3.5.6.1.4
zhoneIfXEntryIfTypeAlias OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object maps to ifType object within the ifEntry
table. This object is used when creating a new
row in the ifEntry table since ifType is read-only."
::= { zhoneIfXEntry 4 }
-- 1.3.6.1.4.1.5504.3.5.6.1.5
zhoneIfXEntryRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create and delete rows within the
ifEntry table since ifEntry is standard and does not
have a Row Status object.
Currently, only ifType value of 'other' is allowed to be
created via SNMP."
::= { zhoneIfXEntry 5 }
-- 1.3.6.1.4.1.5504.3.5.6.1.6
zhoneIfXEntryShelfAlias OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writeable shelf number.
This object maps to the read-only object zhoneShelfNumber."
::= { zhoneIfXEntry 6 }
-- 1.3.6.1.4.1.5504.3.5.6.1.7
zhoneIfXEntrySlotAlias OBJECT-TYPE
SYNTAX Integer32 (0..33)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writeable slot number.
This object maps to the read-only object zhoneSlotNumber."
::= { zhoneIfXEntry 7 }
-- 1.3.6.1.4.1.5504.3.5.6.1.8
zhoneIfXEntryPortAlias OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writeable port number.
This object maps to the read-only object zhonePortNumber."
::= { zhoneIfXEntry 8 }
-- 1.3.6.1.4.1.5504.3.5.6.1.9
zhoneIfXEntrySubportAlias OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writeable subport number.
This object maps to the read-only object zhoneSubPortNumber."
::= { zhoneIfXEntry 9 }
-- ZHONE_KEYWORD_PROFILE_LABEL = description-index
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.descriptionIndex
-- ZHONE_KEYWORD_STORAGE_ORDER = 12
-- 1.3.6.1.4.1.5504.3.5.6.1.10
zhoneIfXDescriptionIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index value of a zhoneDescriptionEntry. Zero indicates
no reference to zhoneDescriptionEntry."
::= { zhoneIfXEntry 10 }
-- 1.3.6.1.4.1.5504.3.5.7
zhonePhysicalToIfIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhonePhysicalToIfIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to translate from shelf/slot/physical port/subport/
iftype/iftype-extension to the interface number
(zhonePhysicalIfIndex). The physical port is the port number
on the card selected by shelf/slot. The role of subport may
vary depending on the card type, but is included to allow
maximum flexibility and future exhancements. Iftype-extension
is searched when iftype is set to 'ZHONEIFTYPE_NONE(0)'."
::= { zhoneInterfaceTranslation 7 }
-- 1.3.6.1.4.1.5504.3.5.7.1
zhonePhysicalToIfIndexEntry OBJECT-TYPE
SYNTAX ZhonePhysicalToIfIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The physical table is indexed by shelf/slot/physical port
/subport/iftype/iftype-extension. In instances where there
is no subport the value of subport should be set to zero."
INDEX { zhoneShelfIndex, zhoneSlotIndex, zhonePortIndex, zhoneSubPortIndex, zhoneIfType,
zhoneIfTypeExtension }
::= { zhonePhysicalToIfIndexTable 1 }
ZhonePhysicalToIfIndexEntry ::=
SEQUENCE {
zhonePortIndex
Integer32,
zhoneSubPortIndex
Integer32,
zhoneIfType
IANAifType,
zhoneIfTypeExtension
ZhoneIfType,
zhonePhysicalIfIndex
InterfaceIndex
}
-- ZHONE_KEYWORD_PROFILE_LABEL = port
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.port
-- ZHONE_KEYWORD_STORAGE_ORDER = 4
-- 1.3.6.1.4.1.5504.3.5.7.1.1
zhonePortIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number of the physical port on the card or
device. The numbering should start at 1 for the first
port on the device and proceed sequentially."
::= { zhonePhysicalToIfIndexEntry 1 }
-- ZHONE_KEYWORD_PROFILE_LABEL = subport
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.subPort
-- ZHONE_KEYWORD_STORAGE_ORDER = 5
-- 1.3.6.1.4.1.5504.3.5.7.1.2
zhoneSubPortIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry provides flexibility to define more than one
interface on a port. The most common use of subport will
be to handle structured TDM lines allowing for example an
interface number to be assign to each DS1 in a DS3.
Subport may also be used to handle other situations where
a physical port contains more than one inetrface."
::= { zhonePhysicalToIfIndexEntry 2 }
-- 1.3.6.1.4.1.5504.3.5.7.1.4
zhoneIfType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of interface. Additional values for ifType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual convention.
"
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2"
::= { zhonePhysicalToIfIndexEntry 4 }
-- 1.3.6.1.4.1.5504.3.5.7.1.5
zhoneIfTypeExtension OBJECT-TYPE
SYNTAX ZhoneIfType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This field is used to specify the zhone-proprietary
interface type when necessary. For example, if the
interface is a line-group, iftype is set to 'IANAIFTYPE_OTHER'
and ifTypeExtension is set to 'ZHONEIFTYPE_LINEGROUP'.
By default ifTypeExtension is set to 'ZHONEIFTYPE_NONE(0)'."
::= { zhonePhysicalToIfIndexEntry 5 }
-- ZHONE_KEYWORD_PROFILE_LABEL = ifindex
-- ZHONE_KEYWORD_STORAGE_LABEL = If_Translate_Record.ifIndex
-- ZHONE_KEYWORD_STORAGE_ORDER = 1
-- 1.3.6.1.4.1.5504.3.5.7.1.6
zhonePhysicalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number of the pport or pport/subport that
uniquely identifies the interface across the system."
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2"
::= { zhonePhysicalToIfIndexEntry 6 }
-- 1.3.6.1.4.1.5504.3.5.8
zhoneDescriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneDescriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of description entries."
::= { zhoneInterfaceTranslation 8 }
-- 1.3.6.1.4.1.5504.3.5.8.1
zhoneDescriptionEntry OBJECT-TYPE
SYNTAX ZhoneDescriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Descritpion entry."
INDEX { zhoneIfXDescriptionIndex }
::= { zhoneDescriptionTable 1 }
ZhoneDescriptionEntry ::=
SEQUENCE {
zhoneDescriptionRowStatus
ZhoneRowStatus,
zhoneDescriptionText
OCTET STRING
}
-- 1.3.6.1.4.1.5504.3.5.8.1.1
zhoneDescriptionRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status object."
::= { zhoneDescriptionEntry 1 }
-- ZHONE_KEYWORD_PROFILE_LABEL = description-text
-- ZHONE_KEYWORD_QUICK_ACCESS = TRUE
-- ZHONE_KEYWORD_STORAGE_LABEL = Description_Profile.zhoneDescriptionText
-- ZHONE_KEYWORD_STORAGE_ORDER = 1
-- 1.3.6.1.4.1.5504.3.5.8.1.2
zhoneDescriptionText OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description object used as free format text description.
Contains readable characters, with the following exclusions:
1. Double quotes
2. Carriage Returns
3. Line Feeds
4. Carat
Maximum number of characters is 64, including any NULL terminator."
::= { zhoneDescriptionEntry 2 }
-- 1.3.6.1.4.1.5504.3.5.9
zhoneIfXDescriptionIndexNext OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the next available zhoneIfXDescriptionIndex."
::= { zhoneInterfaceTranslation 9 }
-- 1.3.6.1.4.1.5504.3.5.10
zhoneLineRedStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneLineRedStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Line redundancy information"
::= { zhoneInterfaceTranslation 10 }
-- 1.3.6.1.4.1.5504.3.5.10.1
zhoneLineRedStatusEntry OBJECT-TYPE
SYNTAX ZhoneLineRedStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Line redundancy information for on line"
INDEX { zhoneIfIndex }
::= { zhoneLineRedStatusTable 1 }
ZhoneLineRedStatusEntry ::=
SEQUENCE {
zhoneLineRedStatusFunction
INTEGER,
zhoneLineRedOpStatus
INTEGER
}
-- 1.3.6.1.4.1.5504.3.5.10.1.1
zhoneLineRedStatusFunction OBJECT-TYPE
SYNTAX INTEGER
{
inactive(1),
standby(2),
active(3),
unavailable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current redundancy function as returned from LineRR.
. inactive means registered but neither active nor
standby
. standby means this is the protection line in a pair.
. active means either standalone or the working line
in a protection pair.
. unavailable means not registered with LineRR"
::= { zhoneLineRedStatusEntry 1 }
-- 1.3.6.1.4.1.5504.3.5.10.1.2
zhoneLineRedOpStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
oos(2),
trafficDisabled(3),
unavailable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Line status
. active means line is up as standalone or the
working line in a redundant pair.
. oos means line is down
. trafficDisabled means up as standby
. unavailable means not registered with LineRR"
::= { zhoneLineRedStatusEntry 2 }
-- 1.3.6.1.4.1.5504.3.5.11
zhoneLineRedTraps OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Traps for facility redundancy"
::= { zhoneInterfaceTranslation 11 }
-- 1.3.6.1.4.1.5504.3.5.11.0
zhoneLineRedTrapsPrefix OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Add zero in OID for traps."
::= { zhoneLineRedTraps 0 }
-- 1.3.6.1.4.1.5504.3.5.11.0.1
zhoneLineRedundancyUnsafe NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Sent when configured peer is not traffic-disabled"
::= { zhoneLineRedTrapsPrefix 1 }
-- 1.3.6.1.4.1.5504.3.5.11.0.2
zhoneLineRedundancySafe NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Sent when both lines in a facility-redundant pair
have become redundancy ready."
::= { zhoneLineRedTrapsPrefix 2 }
END
--
-- genIntfTranslationTable.mib
--