WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zhone/ZHONE-GEN-SUBSCRIBER

2346 lines
69 KiB
Plaintext
Raw Permalink Blame History

--
-- genSubscriberMib.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285
-- Monday, October 06, 2014 at 09:11:23
--
ZHONE-GEN-SUBSCRIBER DEFINITIONS ::= BEGIN
IMPORTS
AtmVpIdentifier, AtmVcIdentifier
FROM ATM-TC-MIB
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
OBJECT-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
zhoneSubscriber
FROM Zhone
ZhoneAdminString, ZhoneRowStatus
FROM Zhone-TC;
-- /vob/EPILOGUE/binaries/emissary/solaris/mibcomp rfc2514.mib rfc1907.mib
-- iftype.mib rfc2233.mib rfc2571.mib Zhone.mib Zhone-TC.mib INET-ADDRESS-MIB.mib -stub -o
-- subHdlrs.c genSubscriberMib.mib
--
-- /vob/zhonetools/bin/pahrser.pl rfc2514.mib rfc1907.mib iftype.mib
-- rfc2233.mib rfc2571.mib Zhone.mib Zhone-TC.mib INET-ADDRESS-MIB.mib genSubscriberMib.mib
-- **** Note: To prevent pahrser error, Default Value line of
-- subVoiceFeatureSetOne must be commented.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-- 1.3.6.1.4.1.5504.3.4.1
zhoneSubscriberRecords MODULE-IDENTITY
LAST-UPDATED "200805271445Z" -- May 27, 2008 at 14:45 GMT
ORGANIZATION
"Zhone Technologies, Inc."
CONTACT-INFO
" Postal:
Zhone Technologies, Inc.
@ Zhone Way
7001 Oakport Street
Oakland, CA 94621
USA
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
Tel: +1-510-777-7000
Fax: +1-510-777-7001
E-mail: support@zhone.com"
DESCRIPTION
"The MIB module to describe objects for the
Subscriber or End user of the system.
The MIB contains tables that define subscriber
infomation, data services, and voice mapping.
While there is a single data mapping entry for
each subscriber there can be multiple voice entries
(phone lines) per subscriber."
REVISION "201410011000Z" -- October 01, 2014 at 10:00 GMT
DESCRIPTION
"V01.00.36 Add centrex feature to subVoiceFeatureSetOne"
REVISION "201212192304Z" -- December 19, 2012 at 23:04 GMT
DESCRIPTION
"V01.00.35 Add dataonly feature to subVoiceFeatureSetOne"
REVISION "201112252319Z" -- December 25, 2011 at 23:19 GMT
DESCRIPTION
"V01.00.34 - Added new feature COD for SIP
to subVoiceFeatureSetOne."
REVISION "201109120405Z" -- September 12, 2011 at 04:05 GMT
DESCRIPTION
"V01.00.33 - Added new features dtmf-rfc2833 and dtmf-inband
to subVoiceFeatureSetOne."
REVISION "201006080253Z" -- June 08, 2010 at 02:53 GMT
DESCRIPTION
"V01.00.32 - Modified reversepolarity feature as lss-rb and
added lss-tone to subVoiceFeatureSetOne."
REVISION "201005040408Z" -- May 04, 2010 at 04:08 GMT
DESCRIPTION
"V01.00.31 - Added hotline and warmline to subVoiceFeatureSetOne
Added hotline-dn and hotline-initial-timer to subscriber-voice-voip
table."
REVISION "200906260320Z" -- June 26, 2009 at 03:20 GMT
DESCRIPTION
"V01.00.30 - Added isdnToVoip to subVoiceConnectionType."
REVISION "200905260302Z" -- May 26, 2009 at 03:02 GMT
DESCRIPTION
"V01.00.29 - Added new feature bit voiceonly."
REVISION "200805271723Z" -- May 27, 2008 at 17:23 GMT
DESCRIPTION
"V01.00.28 - Added new connection type voipToEbs."
REVISION "200802210224Z" -- February 21, 2008 at 02:24 GMT
DESCRIPTION
"V01.00.27 - Added Authorization Username to subscriber voice voip profile."
REVISION "200712261443Z" -- December 26, 2007 at 14:43 GMT
DESCRIPTION
"V01.00.26 - Added new feature bit reverse-polarity to subscirberFeatureSetOne object"
REVISION "200702281511Z" -- February 28, 2007 at 15:11 GMT
DESCRIPTION
"V01.00.25 - add tr008 endpoint"
REVISION "200602031042Z" -- February 03, 2006 at 10:42 GMT
DESCRIPTION
"V01.00.24 - Added conference to featureSetOne."
REVISION "200508231400Z" -- August 23, 2005 at 14:00 GMT
DESCRIPTION
"V01.00.23 - Add comments about validations of subscriber-voice-voip"
REVISION "200505191618Z" -- May 19, 2005 at 16:18 GMT
DESCRIPTION
"V01.00.22 - changed subVoiceVoipRegistrationServer range to 0 - 255 for peer to peer SIP."
REVISION "200505031326Z" -- May 03, 2005 at 13:26 GMT
DESCRIPTION
"V01.00.22 -- Added voipRegistrationServer."
REVISION "200502251739Z" -- February 25, 2005 at 17:39 GMT
DESCRIPTION
"V01.00.21 -- Added Call Transfer and Call Wait to featureSetOne"
REVISION "200412021146Z" -- December 02, 2004 at 11:46 GMT
DESCRIPTION
"V01.00.20 -- Added plar feature to subscriber voice profile"
REVISION "200405261209Z" -- May 26, 2004 at 12:09 GMT
DESCRIPTION
"V01.00.19 -- Added alwaysoffhook feature to subscriber voice profile"
REVISION "200405121110Z" -- May 12, 2004 at 11:10 GMT
DESCRIPTION
"V01.00.18 -- Added list of features enabled for the subscriber"
REVISION "200404211137Z" -- April 21, 2004 at 11:37 GMT
DESCRIPTION
"V01.00.17 -- add potsToDs1 to connectiontype"
REVISION "200404161458Z" -- April 16, 2004 at 14:58 GMT
DESCRIPTION
"V01.00.16 - Added subVoiceVoipPlarDestIpAddrType"
REVISION "200403291133Z" -- March 29, 2004 at 11:33 GMT
DESCRIPTION
"V01.00.15 - Added support for VOIP PLAR"
REVISION "200401211705Z" -- January 21, 2004 at 17:05 GMT
DESCRIPTION
"V01.00.14 - Added a new connection type isdnToVoip"
REVISION "200401070948Z" -- January 07, 2004 at 09:48 GMT
DESCRIPTION
"V01.00.13 - Changed SIP to VOIP."
REVISION "200311061017Z" -- November 06, 2003 at 10:17 GMT
DESCRIPTION
"V01.00.12 - Changed sipUri to sip username in subscriber-voice-sip profile."
REVISION "200307281116Z" -- July 28, 2003 at 11:16 GMT
DESCRIPTION
"V01.00.11 - Changes range of DS0 in DS1 endpoint to 1..32"
REVISION "200306271119Z" -- June 27, 2003 at 11:19 GMT
DESCRIPTION
"V01.00.10 - Add huntgroup to subscribevoice and huntgroup index1, 2 and 3 to subscribervoiceDs1"
REVISION "200305301413Z" -- May 30, 2003 at 14:13 GMT
DESCRIPTION
"V01.00.09 - Add sipToPots connection type."
REVISION "200302171410Z" -- February 17, 2003 at 14:10 GMT
DESCRIPTION
"V01.00.08 - Added Enhanced Business Service (EBS)
provisioning for Malc ULC."
REVISION "200302031340Z" -- February 03, 2003 at 13:40 GMT
DESCRIPTION
"V01.00.07 -
Added the elcpAal2ToV52 subVoiceConnectionType and
new voice endpoint table subVoiceElcpAal2Table."
REVISION "200301221501Z" -- January 22, 2003 at 15:01 GMT
DESCRIPTION
"V01.00.06 - Added subVoiceDs1 and subVoiceSip tables"
REVISION "200206241701Z" -- June 24, 2002 at 17:01 GMT
DESCRIPTION
"V01.00.05 -
Added the potsToGr303 and potsToV52 subscriber voice types"
REVISION "200112071749Z" -- December 07, 2001 at 17:49 GMT
DESCRIPTION
"V01.00.04 -
Changed the range from 16-255 to 1-255 for the
subVoiceAal2Cid field.
Also update the description with jetstream information."
REVISION "200110291546Z" -- October 29, 2001 at 15:46 GMT
DESCRIPTION
"V01.00.03 - Added to subIadType - zedgeBH2A, zedgeH2A and zedgeH2AO"
REVISION "200106291828Z" -- June 29, 2001 at 18:28 GMT
DESCRIPTION
"V01.00.02 - Added DEFVAL for Operational Status and Data Stats Status"
REVISION "200011151252Z" -- November 15, 2000 at 12:52 GMT
DESCRIPTION
"V01.00.01 - Introduced new keyword GET_BY_VARS"
REVISION "200009121354Z" -- September 12, 2000 at 13:54 GMT
DESCRIPTION
"V01.00.00 - Initial Release"
::= { zhoneSubscriber 1 }
--
-- Textual conventions
--
ZhoneCodecType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Voice coding techniques."
SYNTAX INTEGER
{
g711mu(1),
g711a(2),
g726(3),
g729a(4),
g723(5)
}
T38FaxType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"t.38 fax relay techniques"
SYNTAX INTEGER
{
t38Udptl(1),
t38Rtp(2),
t38None(3)
}
--
-- Node definitions
--
-- 1.3.6.1.4.1.5504.3.4.1.1
nextSubId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next available Subscriber ID (subId) that can
be used by the manager when creating a subscriber
ID. A Get request to this field causes the current
number to be returned and the value to be incremented
for the next requester."
::= { zhoneSubscriberRecords 1 }
-- 1.3.6.1.4.1.5504.3.4.1.2
nextEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next available index that can be used by the
manager when creating protocol specific end point
connections. For example, when a new voice subscriber
record is being added, the ATM/GR303/etc. protocol
specific information is contained in the associated
protocol tables (AAL2 mib and GR303 mibs) these indices
are used for row creation in these tables. A per
protocol type index scheme was not used to allow
flexibility in adding additional protocol support.
A Get request to this field causes the current
number to be returned and the value to be incremented
for the next requester."
::= { zhoneSubscriberRecords 2 }
-- 1.3.6.1.4.1.5504.3.4.1.3
subInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the top level subscriber information in
a PLS system. Each subscriber has an entry in table
for each physical connection provisioned for the
subscriber, the type of IAD in use and line rate both
the provioned line rate (subMaxAllowedLineRate) and the
line rate at which the circuit can operate at
(subMaxCapableLineRate)."
::= { zhoneSubscriberRecords 3 }
-- 1.3.6.1.4.1.5504.3.4.1.3.1
subInfoEntry OBJECT-TYPE
SYNTAX SubInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber table is indexed by the subscriber ID
which is a numeric ID used by the system to uniquely
identify each subscriber and the LgId which identified
the line group (physical) line that is used by the
subscriber. A subscriber may have multiple entries,
implying that the subscriber has multiple lines or IADs,
each entry has a unique line or lgId. "
INDEX { subId, subLgId }
::= { subInfoTable 1 }
SubInfoEntry ::=
SEQUENCE {
subId
Integer32,
subLgId
Integer32,
subName
ZhoneAdminString,
subProviderId
Integer32,
subIadType
INTEGER,
subMaxAllowedLineRate
Integer32,
subMaxCapableLineRate
Integer32,
subNextVoiceConnectionIndex
Integer32,
subRowStatus
ZhoneRowStatus
}
--
-- 1.3.6.1.4.1.5504.3.4.1.3.1.1
subId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique numeric ID used to define a subscriber in
the system. It is also used as the index to the
subDataConnectionTable and subVoiceConnectionTable."
::= { subInfoEntry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.3.1.2
subLgId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The line group entry ID is the LgId defined in the
Line Group Redundancy MIB. LgId identifies the
physical line or line group (primary and redundant
secondary) used for data and voice traffic.
This is a unique number that is assigned when a
line redundancy group is provisioned - this allows
the operator to locate the physical lines (defined
by the line group entry ID) used by the subscriber.
This is used as an index into the subInfoTable,
subDataConnectionTable and the subVoiceConnectionTable
allowing a subscriber own multiple lines.
Required for row creation."
::= { subInfoEntry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.3.1.3
subName OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Admninstratively defined name used to aid operators
identify subscribers in the system, the name is for
operator reference only.
Required for row creation."
::= { subInfoEntry 3 }
--
-- 1.3.6.1.4.1.5504.3.4.1.3.1.4
subProviderId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Unique service provider ID. This value is used
throughout the management system to link objects with
customers or service providers."
::= { subInfoEntry 4 }
--
-- 1.3.6.1.4.1.5504.3.4.1.3.1.5
subIadType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
zedge64T(2),
zedge64S(3),
zedge65(4),
zedge100(5),
matP(6),
zedgeBH2A(7),
zedgeH2A(8),
zedgeH2AO(9)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the type of IAD that is used by the
the subscriber.
Required for row creation."
::= { subInfoEntry 5 }
--
-- 1.3.6.1.4.1.5504.3.4.1.3.1.6
subMaxAllowedLineRate OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "Kbits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum line rate that the subscriber is
provisioned to receive from the service provider.
This value is the total line rate or bandwidth of
the subscriber's connection including voice, data
and video.
This number may be less than or equal to the
subMaxCapableLineRate.
Required for row creation."
::= { subInfoEntry 6 }
--
-- 1.3.6.1.4.1.5504.3.4.1.3.1.7
subMaxCapableLineRate OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "Kbits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum line rate that can be supported by the
subscriber line. This rate is determined by several
factors including the distance the subscriber is from
the CO, the copper facilities to the subscriber and
the type of IAD installed. This value is determined
by the service provider.
Required for row creation."
::= { subInfoEntry 7 }
-- 1.3.6.1.4.1.5504.3.4.1.3.1.8
subNextVoiceConnectionIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next available connection index which can be used
for this subscriber and lgid pair. This is used for the
creation of a voice connection entry."
::= { subInfoEntry 8 }
-- 1.3.6.1.4.1.5504.3.4.1.3.1.9
subRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control row creation and deletion.
subName, subLgId, subIadType, subMaxAllowedLineRate,
subMaxCapableLineRate are required for row creation."
::= { subInfoEntry 9 }
-- 1.3.6.1.4.1.5504.3.4.1.4
subDataConnectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubDataConnectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Subscriber Data Conection Table is used to provision
the services and connections that a subscriber requires
for IP data services. The key entry in the table is the
subDataIfIndex which identifies the specific interface
that is providing data connection services. Other
entries focus on subscriber specific data options and
the status of the subscriber's connection.
The table is indexed by subId, subLgId and subDataIfIndex
allowing multiple data records to be provisioned
per subscriber.
Note: the IP data record must be created first prior to this
associated subscriber data connection entry
"
::= { zhoneSubscriberRecords 4 }
-- 1.3.6.1.4.1.5504.3.4.1.4.1
subDataConnectionEntry OBJECT-TYPE
SYNTAX SubDataConnectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Subscriber Data Connection Table"
INDEX { subId, subLgId, subDataIfIndex }
::= { subDataConnectionTable 1 }
SubDataConnectionEntry ::=
SEQUENCE {
subDataIfIndex
InterfaceIndex,
subDataIpIfOperStatus
INTEGER,
subDataUserLogOnId
ZhoneAdminString,
subDataUserPassword
ZhoneAdminString,
subDataMaxAddrAllowed
Integer32,
subDataIpAddrInUse
Integer32,
subDataCurrentIpAddr
IpAddress,
subDataStatsStatus
INTEGER,
subDataRowStatus
ZhoneRowStatus
}
--
-- 1.3.6.1.4.1.5504.3.4.1.4.1.1
subDataIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object should be made equal to the ifIndex
used to identify the entry in the interfaceTable
that defines the IP record for the interface used
by the subscriber."
::= { subDataConnectionEntry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.4.1.2
subDataIpIfOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
testing(3),
unknown(4),
dormant(5),
notPresent(6),
lowerLayerDown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP operational status of the
subscriber's data interface, this status reflects
the ifOperStatus of the interface MIB using the
identical syntax.
up(1) - ready to pass packets
down(2) - the admin status is down or there is a
fault that prevents the interface from passing
packets
testing(3) - the interface has been placed is a
testing state by the administrator
unknown(4) - the status can not be determined for
some reason
dormant(5) - not definition in the interface MIB
notPresent(6) - some component is missing
lowerLayerDown(5) - down due to state of lower-layer
inteface(s)
"
DEFVAL { unknown }
::= { subDataConnectionEntry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.4.1.3
subDataUserLogOnId OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subscriber or user logon ID. The value of the
logon may be managed in different ways depending on
the service provider. In some cases the service will
not require a logon or password.
The default value is a NULL string."
::= { subDataConnectionEntry 3 }
--
-- 1.3.6.1.4.1.5504.3.4.1.4.1.4
subDataUserPassword OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password is used by the subscriber in conjunction
with the subUserLogonID to gain access to features or
services provided by the service provider. The
password object is only valid if the subUserLogonId
is used.
The default value is a NULL string."
::= { subDataConnectionEntry 4 }
--
-- 1.3.6.1.4.1.5504.3.4.1.4.1.5
subDataMaxAddrAllowed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value limits the maximum number of IP addresses
that can be assigned by the DHCP server to the
subscriber's IAD. Allowing multiple addresses to be
assigned allows the subscriber to have multiple
devices attached to the IAD data port without having
to provide DHCP or routing services.
The default value is 1.
Required for row creation."
DEFVAL { 1 }
::= { subDataConnectionEntry 5 }
-- 1.3.6.1.4.1.5504.3.4.1.4.1.6
subDataIpAddrInUse OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the number of IP addresses that
are currently being used by the subscriber. This
value cannot exceed subDataMaxAddrAllowed."
::= { subDataConnectionEntry 6 }
--
-- 1.3.6.1.4.1.5504.3.4.1.4.1.7
subDataCurrentIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address currently assigned to the subscriber.
If more than one address is assigned then this value
should indicate the most recently assigned IP address
assigned to the subscriber. The full list of
addresses assigned to the subscriber can be found in
the DHCP tables."
::= { subDataConnectionEntry 7 }
--
-- 1.3.6.1.4.1.5504.3.4.1.4.1.8
subDataStatsStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if stats are enabled for this user for
debugging purposes. If the status are enabled the
stats can be examined via the IpRec MIB stats table.
The stats associated with this subscriber are
indicated by the subIpIfIndex."
DEFVAL { disabled }
::= { subDataConnectionEntry 8 }
-- 1.3.6.1.4.1.5504.3.4.1.4.1.9
subDataRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Use to control row creation and deletion.
subDataMaxAddrAllowed is required for row creation."
::= { subDataConnectionEntry 9 }
-- 1.3.6.1.4.1.5504.3.4.1.5
subVoiceConnectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceConnectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Voice Subscriber Mapping Table.
This table associates pairs of interface addresses
used by a voice subscriber.
The mapping table associates two enpoints (endPoint1 and
endPoint2) pairs. Each row is indexed by the subscriber id,
line group Id along with the voice connection index (see
subNextVoiceConnectionIndex described in
in the subscriber table.
Each row contains the definitions of the two endpoints
which at this level, is defined as the protocol type for
the endpoint and an index into the associated protocol
specific table. Each associated protocol table, contained
in the appropriate protocol mib, contains the information
required to define the end point (i.e. vpi/vci/cid in the
case of AAL2). So, a row can be used to map a subscriber
POTS line to a class 5 switch phone number.
For example, an AAL2 endpoint is represented by endpoint1
and has defined a type and the index for the AAL2
connection table defined in the AAL2 mib.
A GR-303 endpoint2 is represented by the endpoint2 type
of GR-303 and an index into the associated GR-303 mib. This
mib contains the GR-303 IG name and CRV value (see GR0303 MIB).
The admin status is used to enable/disable the connection.
This is only used during the creation and deletion process of
this entry along with the associated type table entries.
The process is a two step approach where the manager creates
a voice connection entry with admin status down which causes
dummy protocol table entries to be added in the EP1 and EP2
(dummy being row entries with 0/NULL values)
protocol tables (since indexes and ep types are specified
on the row create), manager sets the appropriate
protocol specific entries in the associated mibs, and then
changes the admin status to active.
All entries (the two protocol specific tables, and the
voice connection entry) are tightly coupled and therefore,
the deletion process is exactly the same. The manager
deletes the voice connection entry and the handler
automatically deletes the associated protocol table
entries. AdminStatus must be set to down before the
deletion can occur.
Because of this tight coupling, the EndPoint values (both
indexes and types) cannot be modified but must have the
row deleted and readded with the appropriate information.
The protocol specific tables are always INDEXED as the
index defined in either the endpoint1 or endpoint2 index fields.
This scheme allows flexibility in defining and expanding
the types of connections and allows for use of protocols
of the same type to be defined at both endpoints."
::= { zhoneSubscriberRecords 5 }
-- 1.3.6.1.4.1.5504.3.4.1.5.1
subVoiceConnectionEntry OBJECT-TYPE
SYNTAX SubVoiceConnectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry defines a specific voice connection associated
with the subscriber/lgid pair. Each entry consists of a
connection type and two globally unique indicies which
are used to index into protocol specific address tables
that contain the logical addresses which make up this
voice subscriber's connection.
When a connection entry is created, the endpoint values
(both type and index) must be valid. 0 values are not
allowed."
INDEX { subId, subLgId, subVoiceConnectionIndex }
::= { subVoiceConnectionTable 1 }
SubVoiceConnectionEntry ::=
SEQUENCE {
subVoiceConnectionIndex
Integer32,
subVoiceConnectionType
INTEGER,
subVoiceEndPoint1AddressIndex
Integer32,
subVoiceEndPoint2AddressIndex
Integer32,
subVoiceConnectionDescription
ZhoneAdminString,
subVoiceAdminStatus
INTEGER,
subVoiceRowStatus
ZhoneRowStatus,
subVoiceHuntGroup
TruthValue,
subVoiceFeatureSetOne
BITS
}
--
--
-- 1.3.6.1.4.1.5504.3.4.1.5.1.1
subVoiceConnectionIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The connection index is used to indentify this connection
pair. The number itself is meaningful only for defining
a connection set for this subscriber/lgid pair and no
association with particular connection number can be made
by a manager.
When creating a new voice connection, the next available
index is obtained via the subNextVoiceConnectionIndex
variable in the subscriber mib."
::= { subVoiceConnectionEntry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.5.1.2
subVoiceConnectionType OBJECT-TYPE
SYNTAX INTEGER
{
aal2ToGr303(1),
aal2ToV52(2),
voipToGr303(3),
potsToAal2(4),
isdnToAal2(5),
potsToGr303(6),
potsToV52(7),
voipToDs1(8),
sipToGr303(9),
voipToV52(10),
elcpAal2ToV52(11),
isdnToV52(12),
ebsToGr303(13),
voipToPots(14),
isdnsigToVoip(15),
potsToDs1(16),
voipToTr008(18),
voipToEbs(19),
isdnToVoip(20)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This describes the connection type between the two end
points referred to by the subVoiceEndPointProtocol
indices. Where applicable the first endpoint refers to
the line or premise side of the connection and the second
endpoint refers to the central office side of the
connection.
The following connection types are defined, more types will
added as services are expanded on the BAN, MALC, Sechtor and
ZEdge.
aal2ToGr303 - aal2 VPI/VCI/CID to Gr303 interface group/
CRV
aal2ToV52 - aal2 VPI/VCI/CID to V52 interface/userport.
voipToGr303 - VoIP using SIP or MGCP to Gr303 interface
group/CRV.
potsToAal2 - pots line to aal2 VPI/VCI/CID.
isdnToAal2 - isdn to aal2 VPI/VCI/CID.
potsToGr303 - pots line to Gr303 interface group/CRV.
potsToV52 - pots line to V52 interface/userport.
voipToDs1 - VoIP using either SIP or MGCP to channelized
voice on a DS1.
NOTE!!! sipToGr303 is not supported. Please use voipToGr303.
sipToGr303 - VoIP using SIP to Gr303 interface group/CRV.
voipToV52 - VoIP using either SIP or MGCP to V52 interface/userport.
elcpAal2ToV52 - ELCP Aal2 VPI/VCI/portId/portType to V52.
interface/userport. ATM VCC's with no ELCP uses aal2ToV52.
type instead.
isdnToV52 - Isdn to V52 (ULC to Uplink).
ebsToGr303 - EBS to Gr303 (ULC to Uplink).
voipToPots - VoIP using either SIP or MGCP to POTS (zedge6200em).
isdnsigToVoip - VoIP using either SIP or MGCP to ISDN
voipToTr008 - VoIP using either SIP or MGCP to TR-008 tr008Grp/chan
isdnToVoip - Isdn to VOIP."
::= { subVoiceConnectionEntry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.5.1.3
subVoiceEndPoint1AddressIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index into the associated address table for this
end point. EndPoint1 should describe the line or premise
side of the connection where applicable.
This table contains any specific protocol information
required to defined this half of the voice connection.
Required for row creation."
::= { subVoiceConnectionEntry 3 }
--
-- 1.3.6.1.4.1.5504.3.4.1.5.1.4
subVoiceEndPoint2AddressIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index into the associated address table for this
end point. EndPoint2 should describe the central office
side of the connection where applicable.
This table contains any specific protocol information
required to defined this half of the voice connection.
Required for row creation"
::= { subVoiceConnectionEntry 4 }
--
-- 1.3.6.1.4.1.5504.3.4.1.5.1.5
subVoiceConnectionDescription OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A text string describing this voice call entry.This value
is not used by the system and is provided for
operator reference only. A common use will be to define
the external or public phone number for this voice
line as assigned by the class 5 switch.
Required for row creation."
::= { subVoiceConnectionEntry 5 }
--
-- 1.3.6.1.4.1.5504.3.4.1.5.1.6
subVoiceAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Admin State for this connection.
Required for row creation."
DEFVAL { disabled }
::= { subVoiceConnectionEntry 6 }
-- 1.3.6.1.4.1.5504.3.4.1.5.1.7
subVoiceRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to control row creation and deletion.
A row in this table is created using a
single SNMP SET request with varbinds for:
a) subVoiceRowStatus set to'CreateAndGo' and
the subid, lgid, and connectionindex as an index,
b) the following READ-CREATE object(s) without a
default value (DEFVAL):
* subVoiceEndPoint1AddrIndex
* subVoiceEndPoint2AddrIndex
* subVoiceConnectionType
* subVoiceExtPhoneNumber
"
::= { subVoiceConnectionEntry 7 }
-- 1.3.6.1.4.1.5504.3.4.1.5.1.8
subVoiceHuntGroup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this connection part of a huntGroup? Currently this is only valid
if connection type is sipToDs1 or sipToPots. If this is TRUE then EndPoint2
does not contain any protocol specific information
"
::= { subVoiceConnectionEntry 8 }
-- 1.3.6.1.4.1.5504.3.4.1.5.1.9
subVoiceFeatureSetOne OBJECT-TYPE
SYNTAX BITS
{
hookflash(0),
onhooksignaling(1),
alwaysoffhook(2),
plar(3),
callwait(4),
calltransfer(5),
conference(6),
lss-rb(7),
voiceonly(8),
hotline(9),
warmline(10),
lss-tone(11),
dtmf-rfc2833(12),
dtmf-inband(13),
cod(14),
dataonly(15),
centrex(16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"First set of features that are enabled for the subscriber.
Absence of the feature in the list will disable the feature
for the subscriber.
Bit Feature
^^^ ^^^^^^^
1 hookflash detection
2 onhook signaling
3 always offhook, call is established as soon as
incoming call initiation is made.
4 plar.
5 Call Wait
6 Call Transfer
7 Conference (3-way local conference bridging)
8 Line side supervision through Reverse Battery
9 Voice Only
10 Hotline
11 Warmline
12 Line side supervision through tone
13 DTMF mode as RFC-2833
14 DTMF mode as inband
15 COD - Enable Call on Disconnect for SIP
16 Dataonly
17 Centrex - Enable centrex based features.
"
DEFVAL { { hookflash, onhooksignaling, callwait } }
::= { subVoiceConnectionEntry 9 }
-- 1.3.6.1.4.1.5504.3.4.1.6
subVoiceAal2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceAal2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the AAL2 call information for this
specific subscriber, lgid, and call index.
A row in this table is automatically created when the
subVoiceConnectionType entry requires a aal2 entry."
::= { zhoneSubscriberRecords 6 }
-- 1.3.6.1.4.1.5504.3.4.1.6.1
subVoiceAal2Entry OBJECT-TYPE
SYNTAX SubVoiceAal2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Aal2 table."
INDEX { subVoiceAal2EndPointIndex }
::= { subVoiceAal2Table 1 }
SubVoiceAal2Entry ::=
SEQUENCE {
subVoiceAal2EndPointIndex
Integer32,
subVoiceAal2LineGroupId
Integer32,
subVoiceAal2Vpi
AtmVpIdentifier,
subVoiceAal2Vci
AtmVcIdentifier,
subVoiceAal2Cid
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.6.1.1
subVoiceAal2EndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the AAL2 end
point information. This index is equal to the index
defined for the aal2 endpoint in the
subVoiceConnectionTable."
::= { subVoiceAal2Entry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.6.1.2
subVoiceAal2LineGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line group ID for this AAL2 connection."
::= { subVoiceAal2Entry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.6.1.3
subVoiceAal2Vpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aal2 vpi for this connection."
::= { subVoiceAal2Entry 3 }
--
-- 1.3.6.1.4.1.5504.3.4.1.6.1.4
subVoiceAal2Vci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aal2 vci for this connection."
::= { subVoiceAal2Entry 4 }
--
-- 1.3.6.1.4.1.5504.3.4.1.6.1.5
subVoiceAal2Cid OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aal2 cid for this connection.
1-254 for jetstream.
16-255 for non-jetstream."
::= { subVoiceAal2Entry 5 }
-- 1.3.6.1.4.1.5504.3.4.1.7
subVoiceGr303Table OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceGr303Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the GR303 call information for this
specific subscriber, lgid, and call index.
A row in this table is automatically created when the
subVoiceConnectionType entry requires a GR303 entry."
::= { zhoneSubscriberRecords 7 }
-- 1.3.6.1.4.1.5504.3.4.1.7.1
subVoiceGr303Entry OBJECT-TYPE
SYNTAX SubVoiceGr303Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the GR303 table."
INDEX { subVoiceGr303EndPointIndex }
::= { subVoiceGr303Table 1 }
SubVoiceGr303Entry ::=
SEQUENCE {
subVoiceGr303EndPointIndex
Integer32,
subVoiceGr303IgName
ZhoneAdminString,
subVoiceGr303IgCrv
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.7.1.1
subVoiceGr303EndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the GR303 end
point information. This index is equal to the index
defined for the GR303 endpoint in the
subVoiceConnectionTable."
::= { subVoiceGr303Entry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.7.1.2
subVoiceGr303IgName OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IG name for the associated connection."
::= { subVoiceGr303Entry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.7.1.3
subVoiceGr303IgCrv OBJECT-TYPE
SYNTAX Integer32 (0..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The crv for this connection. See the comVoiceGr303 mib."
::= { subVoiceGr303Entry 3 }
-- 1.3.6.1.4.1.5504.3.4.1.8
subVoiceV52Table OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceV52Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the V5.2 call information for this
specific subscriber, lgid, and call index.
A row in this table is automatically created when the
subVoiceConnectionType entry requires a V5.2 entry."
::= { zhoneSubscriberRecords 8 }
-- 1.3.6.1.4.1.5504.3.4.1.8.1
subVoiceV52Entry OBJECT-TYPE
SYNTAX SubVoiceV52Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the V52 table."
INDEX { subVoiceV52EndPointIndex }
::= { subVoiceV52Table 1 }
SubVoiceV52Entry ::=
SEQUENCE {
subVoiceV52EndPointIndex
Integer32,
subVoiceV52InterfaceName
ZhoneAdminString,
subVoiceV52UserPortId
Integer32,
subVoiceV52UserType
INTEGER,
subVoiceV52IsdnChannelId
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.8.1.1
subVoiceV52EndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the V5.2 end
point information. This index is equal to the index
defined for the V5.2 endpoint in the
subVoiceConnectionTable."
::= { subVoiceV52Entry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.8.1.2
subVoiceV52InterfaceName OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Link name for the associated connection."
::= { subVoiceV52Entry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.8.1.3
subVoiceV52UserPortId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user connection entry for this connection.
See the comVoiceV52 mib."
::= { subVoiceV52Entry 3 }
--
-- 1.3.6.1.4.1.5504.3.4.1.8.1.4
subVoiceV52UserType OBJECT-TYPE
SYNTAX INTEGER
{
pots(1),
isdnDChannel(2),
isdnBChannel(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of user port being defined."
::= { subVoiceV52Entry 4 }
--
-- 1.3.6.1.4.1.5504.3.4.1.8.1.5
subVoiceV52IsdnChannelId OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ISDN B or D channel used in the case that
subVoiceV52UserType is not set to pots."
::= { subVoiceV52Entry 5 }
-- 1.3.6.1.4.1.5504.3.4.1.9
subVoicePotsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoicePotsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the POTS call information for this
specific subscriber, lgid, and call index.
A row in this table is automatically created when the
subVoiceConnectionType entry requires a POTS entry."
::= { zhoneSubscriberRecords 9 }
-- 1.3.6.1.4.1.5504.3.4.1.9.1
subVoicePotsEntry OBJECT-TYPE
SYNTAX SubVoicePotsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the POTS table."
INDEX { subVoicePotsEndPointIndex }
::= { subVoicePotsTable 1 }
SubVoicePotsEntry ::=
SEQUENCE {
subVoicePotsEndPointIndex
Integer32,
subVoicePotsLineGroupId
Integer32,
subVoicePotsHuntGrpEndPointIndex1
Integer32,
subVoicePotsHuntGrpEndPointIndex2
Integer32,
subVoicePotsHuntGrpEndPointIndex3
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.9.1.1
subVoicePotsEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the POTS end
point information. This index is equal to the index
defined for the POTS endpoint in the
subVoiceConnectionTable."
::= { subVoicePotsEntry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.9.1.2
subVoicePotsLineGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line group ID for the associated connection."
::= { subVoicePotsEntry 2 }
-- 1.3.6.1.4.1.5504.3.4.1.9.1.3
subVoicePotsHuntGrpEndPointIndex1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoicePotsEntry 3 }
-- 1.3.6.1.4.1.5504.3.4.1.9.1.4
subVoicePotsHuntGrpEndPointIndex2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoicePotsEntry 4 }
-- 1.3.6.1.4.1.5504.3.4.1.9.1.5
subVoicePotsHuntGrpEndPointIndex3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoicePotsEntry 5 }
-- 1.3.6.1.4.1.5504.3.4.1.10
subVoiceIsdnTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceIsdnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the ISDN call information for this
specific subscriber, lgid, and call index.
A row in this table is automatically created when the
subVoiceConnectionType entry requires a ISDN entry."
::= { zhoneSubscriberRecords 10 }
-- 1.3.6.1.4.1.5504.3.4.1.10.1
subVoiceIsdnEntry OBJECT-TYPE
SYNTAX SubVoiceIsdnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ISDN table."
INDEX { subVoiceIsdnEndPointIndex }
::= { subVoiceIsdnTable 1 }
SubVoiceIsdnEntry ::=
SEQUENCE {
subVoiceIsdnEndPointIndex
Integer32,
subVoiceIsdnLineGroupId
Integer32,
subVoiceIsdnType
INTEGER,
subVoiceIsdnChannelId
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.10.1.1
subVoiceIsdnEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the ISDN end
point information. This index is equal to the index
defined for the ISDN endpoint in the
subVoiceConnectionTable."
::= { subVoiceIsdnEntry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.10.1.2
subVoiceIsdnLineGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line group ID for the associated connection."
::= { subVoiceIsdnEntry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.10.1.3
subVoiceIsdnType OBJECT-TYPE
SYNTAX INTEGER
{
isdnDChannel(1),
isdnBChannel(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of this channel for this connection."
::= { subVoiceIsdnEntry 3 }
--
-- 1.3.6.1.4.1.5504.3.4.1.10.1.4
subVoiceIsdnChannelId OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The channel nummber used for this connection."
::= { subVoiceIsdnEntry 4 }
-- 1.3.6.1.4.1.5504.3.4.1.11
zhoneSubscriberObjectsGroup OBJECT-GROUP
OBJECTS { nextSubId, nextEndPointIndex, subName, subProviderId, subIadType,
subMaxAllowedLineRate, subMaxCapableLineRate, subNextVoiceConnectionIndex, subRowStatus, subDataIpIfOperStatus,
subDataUserLogOnId, subDataUserPassword, subDataMaxAddrAllowed, subDataIpAddrInUse, subDataCurrentIpAddr,
subDataStatsStatus, subDataRowStatus, subVoiceConnectionType, subVoiceEndPoint1AddressIndex, subVoiceEndPoint2AddressIndex,
subVoiceConnectionDescription, subVoiceAdminStatus, subVoiceRowStatus, subVoiceAal2LineGroupId, subVoiceAal2Vpi,
subVoiceAal2Vci, subVoiceAal2Cid, subVoiceGr303IgName, subVoiceGr303IgCrv, subVoiceV52InterfaceName,
subVoiceV52UserPortId, subVoiceV52UserType, subVoiceV52IsdnChannelId, subVoicePotsLineGroupId, subVoiceIsdnLineGroupId,
subVoiceIsdnType, subVoiceIsdnChannelId, subVoiceDs1Ds0ChannelID, subVoiceDs1LineGroupId, subVoiceElcpAal2LineGroupId,
subVoiceElcpAal2Vpi, subVoiceElcpAal2Vci, subVoiceElcpAal2PortId, subVoiceElcpAal2PortType, subVoiceElcpAal2IsdnChannelId,
subVoiceEbsLineGroupId, subVoiceHuntGroup, subVoiceDs1HuntGrpEndPointIndex3, subVoiceDs1HuntGrpEndPointIndex1, subVoicePotsHuntGrpEndPointIndex3,
subVoicePotsHuntGrpEndPointIndex2, subVoicePotsHuntGrpEndPointIndex1, subVoiceDs1HuntGrpEndPointIndex2, subVoiceVoipPassword, subVoiceVoipG726ByteOrder,
subVoiceVoipFramesPerPacket, subVoiceVoipG711Fallback, subVoiceVoipPreferredCodec, subVoiceVoipDirectoryNumber, subVoiceVoipIpInterface,
subVoiceVoipUserName, subVoiceIsdnSigHuntGrpEndPointIndex3, subVoiceIsdnSigHuntGrpEndPointIndex2, subVoiceVoipPlarDestIpAddr, subVoiceVoipPLAR,
subVoiceVoipPlarUdpPort, subVoiceVoipPlarDestIpAddrType, subVoiceFeatureSetOne, subVoiceTr008ChanNum, subVoiceTr008GroupId,
subVoiceVoipAuthUsername, subVoiceHotlineInitialTimer, subVoiceVoipHotlineDN, subVoiceIsdnSigHuntGrpEndPointIndex1, subVoiceIsdnSigEntryIndex,
subVoiceIsdnSigDirectoryNumber }
STATUS current
DESCRIPTION
"This group contains objects associated with
Zhone Subscriber Records"
::= { zhoneSubscriberRecords 11 }
-- 1.3.6.1.4.1.5504.3.4.1.12
subVoiceDs1Table OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceDs1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the call information for this
specific subscriber, lgid, and call index.
A row in this table is automatically created when the
subVoiceConnectionType entry requires a DS1 entry."
::= { zhoneSubscriberRecords 12 }
-- 1.3.6.1.4.1.5504.3.4.1.12.1
subVoiceDs1Entry OBJECT-TYPE
SYNTAX SubVoiceDs1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the subVoiceDs1Table."
INDEX { subVoiceDs1EndPointIndex }
::= { subVoiceDs1Table 1 }
SubVoiceDs1Entry ::=
SEQUENCE {
subVoiceDs1EndPointIndex
Integer32,
subVoiceDs1Ds0ChannelID
Integer32,
subVoiceDs1LineGroupId
InterfaceIndex,
subVoiceDs1HuntGrpEndPointIndex1
Integer32,
subVoiceDs1HuntGrpEndPointIndex2
Integer32,
subVoiceDs1HuntGrpEndPointIndex3
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.12.1.1
subVoiceDs1EndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the DS1 end
point information. This index is equal to the index
defined for the DS1 endpoint in the
subVoiceConnectionTable."
::= { subVoiceDs1Entry 1 }
-- 1.3.6.1.4.1.5504.3.4.1.12.1.2
subVoiceDs1Ds0ChannelID OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DS0 assigned to this subscriber. The same DS0 channel
cannot appear in more than 1 row within this table."
::= { subVoiceDs1Entry 2 }
-- 1.3.6.1.4.1.5504.3.4.1.12.1.3
subVoiceDs1LineGroupId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line group Interface Index of the DS1 interface."
::= { subVoiceDs1Entry 3 }
-- 1.3.6.1.4.1.5504.3.4.1.12.1.4
subVoiceDs1HuntGrpEndPointIndex1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoiceDs1Entry 4 }
-- 1.3.6.1.4.1.5504.3.4.1.12.1.5
subVoiceDs1HuntGrpEndPointIndex2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoiceDs1Entry 5 }
-- 1.3.6.1.4.1.5504.3.4.1.12.1.6
subVoiceDs1HuntGrpEndPointIndex3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoiceDs1Entry 6 }
-- 1.3.6.1.4.1.5504.3.4.1.13
subVoiceVoipTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceVoipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the call information for this
specific subscriber, lgid, and call index.
A row in this table is automatically created when the
subVoiceConnectionType entry requires a SIP or MGCP entry."
::= { zhoneSubscriberRecords 13 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1
subVoiceVoipEntry OBJECT-TYPE
SYNTAX SubVoiceVoipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the subVoiceVoip table."
INDEX { subVoiceVoipEndPointIndex }
::= { subVoiceVoipTable 1 }
SubVoiceVoipEntry ::=
SEQUENCE {
subVoiceVoipEndPointIndex
Integer32,
subVoiceVoipUserName
SnmpAdminString,
subVoiceVoipDirectoryNumber
ZhoneAdminString,
subVoiceVoipIpInterface
InterfaceIndexOrZero,
subVoiceVoipPreferredCodec
ZhoneCodecType,
subVoiceVoipG711Fallback
TruthValue,
subVoiceVoipFramesPerPacket
Integer32,
subVoiceVoipG726ByteOrder
INTEGER,
subVoiceVoipPassword
ZhoneAdminString,
subVoiceVoipPLAR
TruthValue,
subVoiceVoipPlarDestIpAddrType
InetAddressType,
subVoiceVoipPlarDestIpAddr
InetAddress,
subVoiceVoipPlarUdpPort
Integer32,
subVoiceVoipRegistrationServer
Unsigned32,
subVoiceVoipT38Fax
T38FaxType,
subVoiceVoipAuthUsername
ZhoneAdminString,
subVoiceVoipHotlineDN
ZhoneAdminString,
subVoiceHotlineInitialTimer
Unsigned32
}
-- 1.3.6.1.4.1.5504.3.4.1.13.1.1
subVoiceVoipEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing either SIP or MGCP end
point information. This index is equal to the index
defined for either the SIP or MGCP endpoint in the
subVoiceConnectionTable."
::= { subVoiceVoipEntry 1 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.2
subVoiceVoipUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A unique string that identifies the user in the system.
If this string is not unique, error of inconsisten value
is returned."
::= { subVoiceVoipEntry 2 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.3
subVoiceVoipDirectoryNumber OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The directory number, e.g., phone number, assigned to
this endpoint. Contains only digits.
This number must be unique across subscriber-voice-voip
in the system If not, error of inconsistent value is returned.
"
::= { subVoiceVoipEntry 3 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.4
subVoiceVoipIpInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface Index of the LP Interface through which
the SIP signalling and RTP traffic will flow."
::= { subVoiceVoipEntry 4 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.5
subVoiceVoipPreferredCodec OBJECT-TYPE
SYNTAX ZhoneCodecType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the preferred voice codec to be used for this
subscriber."
DEFVAL { g711mu }
::= { subVoiceVoipEntry 5 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.6
subVoiceVoipG711Fallback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether a subscriber may consume bandwidth by
switching to g711, when a fax, modem, b-channel data
session is detected. "
DEFVAL { true }
::= { subVoiceVoipEntry 6 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.8
subVoiceVoipFramesPerPacket OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of voice frames per IP packet."
DEFVAL { 4 }
::= { subVoiceVoipEntry 8 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.9
subVoiceVoipG726ByteOrder OBJECT-TYPE
SYNTAX INTEGER
{
bigEndian(1),
littleEndian(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the byte order to be used when g.726 voice
coding is in use. Cisco uses little endian byte order,
whereas the g.726 standard calls for big endian byte order."
DEFVAL { bigEndian }
::= { subVoiceVoipEntry 9 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.10
subVoiceVoipPassword OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication string needed for call originations through a SIP/MGCP Server.
The SIP/MGCP URI acts as the username."
::= { subVoiceVoipEntry 10 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.11
subVoiceVoipPLAR OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is this subscriber PLAR (private line automatic ringdown) subscriber.
If true we immediately send a INVITE instead of play dialtone, collect digits
"
DEFVAL { false }
::= { subVoiceVoipEntry 11 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.12
subVoiceVoipPlarDestIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of address contained
in the associated instance of subVoiceVoipPlarDestIpAddr."
DEFVAL { ipv4 }
::= { subVoiceVoipEntry 12 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.13
subVoiceVoipPlarDestIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IP address to send INVITE to in case the subscriber is PLAR"
::= { subVoiceVoipEntry 13 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.14
subVoiceVoipPlarUdpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the UDP Port number for the VOIP Setup messages.
5060 is the IANA Registered SIP port."
DEFVAL { 5060 }
::= { subVoiceVoipEntry 14 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.15
subVoiceVoipRegistrationServer OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Voip Registration Server Address. A number between 1 and 255
which identifies the Voip Server that is responsible for this
particular end point.
If this value is not 0, a voip-server-entry with this address
as the appl must exist. If not, error of wrong value is returned.
For plar, this value must be 0, or wrong value is returned. Also,
a voip-server-entry with address 255/255 must exist. If not,
error of resource unavailable is returned."
DEFVAL { 1 }
::= { subVoiceVoipEntry 15 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.16
subVoiceVoipT38Fax OBJECT-TYPE
SYNTAX T38FaxType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines t38 fax protocol used for this subscriber"
DEFVAL { t38None }
::= { subVoiceVoipEntry 16 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.17
subVoiceVoipAuthUsername OBJECT-TYPE
SYNTAX ZhoneAdminString
UNITS "characters"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authorization username used for calculating the credentials,
when we receive 401/407 response. This field is optional,
if not configured, then it's value is same as username field"
DEFVAL { "" }
::= { subVoiceVoipEntry 17 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.18
subVoiceVoipHotlineDN OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The directory number to auto dial when hotline or warmline feature is
activated for the subscriber."
::= { subVoiceVoipEntry 18 }
-- 1.3.6.1.4.1.5504.3.4.1.13.1.19
subVoiceHotlineInitialTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the timer in seconds to wait before dialing hotline DN
when hotline or warmline feature is enabled."
DEFVAL { 4 }
::= { subVoiceVoipEntry 19 }
-- 1.3.6.1.4.1.5504.3.4.1.14
subVoiceElcpAal2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceElcpAal2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the ELCP AAL2 call information for
this specific subscriber, lgid, and call index.
A row in this table is automatically created when the
subVoiceConnectionType entry requires an ELCP aal2 entry."
::= { zhoneSubscriberRecords 14 }
-- 1.3.6.1.4.1.5504.3.4.1.14.1
subVoiceElcpAal2Entry OBJECT-TYPE
SYNTAX SubVoiceElcpAal2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ELCP Aal2 table."
INDEX { subVoiceAal2EndPointIndex }
::= { subVoiceElcpAal2Table 1 }
SubVoiceElcpAal2Entry ::=
SEQUENCE {
subVoiceElcpAal2EndPointIndex
Integer32,
subVoiceElcpAal2LineGroupId
Integer32,
subVoiceElcpAal2Vpi
AtmVpIdentifier,
subVoiceElcpAal2Vci
AtmVcIdentifier,
subVoiceElcpAal2PortId
Integer32,
subVoiceElcpAal2PortType
INTEGER,
subVoiceElcpAal2IsdnChannelId
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.14.1.1
subVoiceElcpAal2EndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the ELCP AAL2
end point information. This index is equal to the
index defined for the ELCP aal2 endpoint in the
subVoiceConnectionTable."
::= { subVoiceElcpAal2Entry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.14.1.2
subVoiceElcpAal2LineGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line group ID for this ELCP AAL2 connection."
::= { subVoiceElcpAal2Entry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.14.1.3
subVoiceElcpAal2Vpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aal2 vpi for this connection."
::= { subVoiceElcpAal2Entry 3 }
--
-- 1.3.6.1.4.1.5504.3.4.1.14.1.4
subVoiceElcpAal2Vci OBJECT-TYPE
SYNTAX AtmVcIdentifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aal2 vci for this connection."
::= { subVoiceElcpAal2Entry 4 }
--
-- 1.3.6.1.4.1.5504.3.4.1.14.1.5
subVoiceElcpAal2PortId OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port ID to identify an IAD port on the CP side. PortId
in combination with PortType uniquely identifies a port
on the IAD side for this voice connection."
::= { subVoiceElcpAal2Entry 5 }
--
-- 1.3.6.1.4.1.5504.3.4.1.14.1.6
subVoiceElcpAal2PortType OBJECT-TYPE
SYNTAX INTEGER
{
pots(1),
isdnDChannel(2),
isdnBChannel(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port type for the CP (IAD) port for the current connection."
::= { subVoiceElcpAal2Entry 6 }
--
-- 1.3.6.1.4.1.5504.3.4.1.14.1.7
subVoiceElcpAal2IsdnChannelId OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID is not applicable to pots ports. For ISDN Bra ports,
the ChannelId's for D, B1 and B2 are 0, 1 and 2 respectively."
::= { subVoiceElcpAal2Entry 7 }
-- 1.3.6.1.4.1.5504.3.4.1.15
subVoiceEbsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceEbsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the Enhanced Business Service (EBS)
call information for this specific subscriber, lgid, and
call index.
"
::= { zhoneSubscriberRecords 15 }
-- 1.3.6.1.4.1.5504.3.4.1.15.1
subVoiceEbsEntry OBJECT-TYPE
SYNTAX SubVoiceEbsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the EBS table."
INDEX { subVoiceEbsEndPointIndex }
::= { subVoiceEbsTable 1 }
SubVoiceEbsEntry ::=
SEQUENCE {
subVoiceEbsEndPointIndex
Integer32,
subVoiceEbsLineGroupId
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.15.1.1
subVoiceEbsEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the EBS end
point information. This index is equal to the index
defined for the EBS endpoint in the subVoiceConnectionTable."
::= { subVoiceEbsEntry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.15.1.2
subVoiceEbsLineGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line group ID for the associated connection."
::= { subVoiceEbsEntry 2 }
-- 1.3.6.1.4.1.5504.3.4.1.16
subVoiceIsdnSigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceIsdnSigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the ISDN signaling call information for
this specific subscriber: isdn-signaling-group-index,
directory-number, and hunt group info."
::= { zhoneSubscriberRecords 16 }
-- 1.3.6.1.4.1.5504.3.4.1.16.1
subVoiceIsdnSigEntry OBJECT-TYPE
SYNTAX SubVoiceIsdnSigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { subVoiceIsdnSigEndPointIndex }
::= { subVoiceIsdnSigTable 1 }
SubVoiceIsdnSigEntry ::=
SEQUENCE {
subVoiceIsdnSigEndPointIndex
Integer32,
subVoiceIsdnSigEntryIndex
INTEGER,
subVoiceIsdnSigDirectoryNumber
ZhoneAdminString,
subVoiceIsdnSigHuntGrpEndPointIndex1
Integer32,
subVoiceIsdnSigHuntGrpEndPointIndex2
Integer32,
subVoiceIsdnSigHuntGrpEndPointIndex3
Integer32
}
-- 1.3.6.1.4.1.5504.3.4.1.16.1.1
subVoiceIsdnSigEndPointIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the ISDN subscriber end
point information."
::= { subVoiceIsdnSigEntry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.16.1.2
subVoiceIsdnSigEntryIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Isdn Signaling index the subscriber belongs to."
::= { subVoiceIsdnSigEntry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.16.1.3
subVoiceIsdnSigDirectoryNumber OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Directory Number of the subscriber."
::= { subVoiceIsdnSigEntry 3 }
-- 1.3.6.1.4.1.5504.3.4.1.16.1.4
subVoiceIsdnSigHuntGrpEndPointIndex1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoiceIsdnSigEntry 4 }
-- 1.3.6.1.4.1.5504.3.4.1.16.1.5
subVoiceIsdnSigHuntGrpEndPointIndex2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoiceIsdnSigEntry 5 }
-- 1.3.6.1.4.1.5504.3.4.1.16.1.6
subVoiceIsdnSigHuntGrpEndPointIndex3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hunt group this subscriber is part of. Each subscriber can be part of 3
hunt groups. The hunt group endpoint index is endpt2 index of the
subscriber-voice connection which has huntgroup as TRUE"
::= { subVoiceIsdnSigEntry 6 }
-- 1.3.6.1.4.1.5504.3.4.1.17
subVoiceTr008Table OBJECT-TYPE
SYNTAX SEQUENCE OF SubVoiceTr008Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides TR-008 channel information. It contains
information about ifIndex of tr-008 if-stack, and tr-008
specific channel number.
"
::= { zhoneSubscriberRecords 17 }
-- 1.3.6.1.4.1.5504.3.4.1.17.1
subVoiceTr008Entry OBJECT-TYPE
SYNTAX SubVoiceTr008Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the tr008 table."
INDEX { subVoiceTr008EndPointIndex }
::= { subVoiceTr008Table 1 }
SubVoiceTr008Entry ::=
SEQUENCE {
subVoiceTr008EndPointIndex
Integer32,
subVoiceTr008GroupId
InterfaceIndex,
subVoiceTr008ChanNum
INTEGER
}
-- 1.3.6.1.4.1.5504.3.4.1.17.1.1
subVoiceTr008EndPointIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into this table containing the TR008 end
point information. This index is equal to the index
defined for the tr-008 endpoint in the subVoiceConnectionTable."
::= { subVoiceTr008Entry 1 }
--
-- 1.3.6.1.4.1.5504.3.4.1.17.1.2
subVoiceTr008GroupId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the ifIndex of tr-008 ifstack. It is used to
lookup the tr-008 shelf group, which this tr-008 channel
belongs to."
::= { subVoiceTr008Entry 2 }
--
-- 1.3.6.1.4.1.5504.3.4.1.17.1.3
subVoiceTr008ChanNum OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field contains a tr-008 channel number. A tr-008
channel number is an index in a shelf group, which can
be used to map to specific timeslot."
DEFVAL { 1 }
::= { subVoiceTr008Entry 3 }
END
--
-- genSubscriberMib.mib
--
View Git Blame Copy Permalink