WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/xerox/XEROX-GENERAL-MIB

5008 lines
196 KiB
Plaintext
Raw Permalink Blame History

XEROX-GENERAL-MIB DEFINITIONS ::= BEGIN
-- Module: General MIB
-- File: 07gen.mib
-- Date: 24 Apr 2005 - Version 5.402.pub
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY,
OBJECT-TYPE, Counter32, Integer32
FROM SNMPv2-SMI -- RFC 1442/1902/2578
RowStatus, TruthValue, DisplayString,
DateAndTime
FROM SNMPv2-TC -- RFC 1443/1903/2579
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- RFC 1444/1904/2580
hrDeviceIndex, InternationalDisplayString,
ProductID
FROM HOST-RESOURCES-MIB -- RFC 1514/2790
IANACharset
FROM IANA-CHARSET-MIB -- Charsets.mib
xeroxCommonMIB
FROM XEROX-COMMON-MIB
Cardinal32, CodedLanguage, CodedCountry,
CodeIndexedStringIndex, Ordinal16, Ordinal32,
XcmGenGroupSupport,
XcmGenMessageMapStringLabel,
XcmGenNotifyDetailType,
XcmGenNotifySchemeSupport,
XcmGenNotifySeverityFilter,
XcmGenNotifyTrainingFilter,
XcmGenOptionValueSyntax,
XcmGenReconfOptionState,
XcmGenRowPersistence,
XcmGenSNMPDomain,
XcmGenSNMPVersion,
XcmGenSNMPv2ErrorStatus,
zeroDotZero,
XcmGlobalUniqueID,
XcmFixedLocaleDisplayString,
XcmNamedLocaleUtf8String
FROM XEROX-GENERAL-TC;
xcmGeneralMIB MODULE-IDENTITY
LAST-UPDATED "0504240000Z" -- 24 Apr 2005
ORGANIZATION "Xerox Corporation - XCMI Working Group"
CONTACT-INFO "
XCMI Editors
E-Mail: coherence@crt.xerox.com
--
--
"
DESCRIPTION "
Version: 5.402.pub
Xerox General MIB
See section 9 'Supplement' of XCMI General TC for
implementation and conformance guidance for this MIB module.
Copyright (C) 1995-2005 Xerox Corporation. All Rights Reserved."
::= { xeroxCommonMIB 51 }
xcmGenZeroDummy OBJECT IDENTIFIER ::= { zeroDotZero 51 }
--
-- General Base Group (Mandatory)
--
-- Implementation of this group is mandatory for all systems.
xcmGenBase OBJECT IDENTIFIER ::= { xcmGeneralMIB 1 }
xcmGenBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of general counters and capabilities for ease of use
of the XCMI General MIB on this host system.
Usage: The ONLY valid row in the 'xcmGenBaseTable'
SHALL have an 'xcmGenBaseIndex' of one ('1')."
::= { xcmGenBase 2 }
xcmGenBaseEntry OBJECT-TYPE
SYNTAX XcmGenBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry of general counters and capabilities for ease of use
of the XCMI General MIB on this host system.
Usage: The ONLY valid row in the 'xcmGenBaseTable'
SHALL have an 'xcmGenBaseIndex' of one ('1')."
INDEX { xcmGenBaseIndex }
::= { xcmGenBaseTable 1 }
XcmGenBaseEntry ::= SEQUENCE {
-- General MIB Info
xcmGenBaseIndex Ordinal32,
xcmGenBaseRowStatus RowStatus,
xcmGenBaseSystemHrDeviceIndex Cardinal32,
-- General MIB Capabilities Info
xcmGenBaseGroupSupport XcmGenGroupSupport,
xcmGenBaseGroupCreateSupport XcmGenGroupSupport,
xcmGenBaseGroupUpdateSupport XcmGenGroupSupport,
xcmGenBaseClientDataMaxSupport Cardinal32,
xcmGenBaseOptionSyntaxSupport Cardinal32,
xcmGenBaseReconfStateSupport Cardinal32,
xcmGenBaseSNMPDomainSupport Cardinal32,
xcmGenBaseSNMPTrapSupport TruthValue,
xcmGenBaseSNMPVersionSupport Cardinal32,
-- General MIB Community Name Info
xcmGenBaseSNMPReadCommunity OCTET STRING,
xcmGenBaseSNMPWriteCommunity OCTET STRING,
xcmGenBaseSNMPTrapCommunity OCTET STRING,
-- General MIB Traversal Info
xcmGenBaseGroupWalkHidden XcmGenGroupSupport,
-- General MIB Notification Info
xcmGenBaseNotifySchemeSupport XcmGenNotifySchemeSupport,
xcmGenBaseNotifySeveritySupport XcmGenNotifySeverityFilter,
xcmGenBaseNotifyTrainingSupport XcmGenNotifyTrainingFilter,
xcmGenBaseSystem1284DeviceId DisplayString,
xcmGenBaseSNMPWarningTrapSupport TruthValue
}
xcmGenBaseIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by this host system to identify this
conceptual row in the 'xcmGenBaseTable'.
Usage: The ONLY valid row in the 'xcmGenBaseTable'
SHALL have an 'xcmGenBaseIndex' of one ('1')."
::= { xcmGenBaseEntry 1 }
xcmGenBaseRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object is used to display status of the ONLY valid
conceptual row in the 'xcmGenBaseTable'.
Usage: 'xcmGenBaseRowStatus' is 'read-only' because
the ONLY valid conceptual row SHALL NOT be deleted."
::= { xcmGenBaseEntry 2 }
xcmGenBaseSystemHrDeviceIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The value of 'hrDeviceIndex' corresponding to the platform
associated conceptual row in the 'hrDeviceTable' representing
the CPU device (of type 'hrDeviceProcessor'), which currently
supports the executing process/thread of this management agent."
REFERENCE "
See: 'hrDeviceIndex' in the Device group of the
IETF Host Resources MIB (RFC 2790).
See: 'xcmHrStoragePlatformDeviceIndex' in the Storage Ext
group of the XCMI Host Resources Ext MIB."
DEFVAL { 0 } -- no system platform device
::= { xcmGenBaseEntry 3 }
xcmGenBaseGroupSupport OBJECT-TYPE
SYNTAX XcmGenGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional XCMI General MIB object groups which are
supported by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Usage: Conforming management agents SHALL accurately
report their support for the XCMI General MIB object groups."
DEFVAL { 3584 } -- mandatory groups
::= { xcmGenBaseEntry 4 }
xcmGenBaseGroupCreateSupport OBJECT-TYPE
SYNTAX XcmGenGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional XCMI General MIB object groups which are
supported for dynamic row creation (via '...RowStatus')
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Usage: Conforming management agents SHALL accurately
report their support for the XCMI General MIB object groups."
DEFVAL { 1536 } -- dynamic row create groups
::= { xcmGenBaseEntry 5 }
xcmGenBaseGroupUpdateSupport OBJECT-TYPE
SYNTAX XcmGenGroupSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional XCMI General MIB object groups which are
supported for existing row update (via SNMP Set-Request PDUs)
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Usage: Conforming management agents SHALL accurately
report their support for the XCMI General MIB object groups."
DEFVAL { 3584 } -- existing row update groups
::= { xcmGenBaseEntry 6 }
xcmGenBaseClientDataMaxSupport OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum 'xcmGenClientDataLength' supported for ANY
conceptual row in the 'xcmGenClientDataTable'.
Usage: Conforming implementations NEED NOT support maximum
'xcmGenClientDataLength' greater than 1 octet."
REFERENCE "
See: 'xcmGenClientDataLength'"
DEFVAL { 0 } -- no client data length support
::= { xcmGenBaseEntry 7 }
xcmGenBaseOptionSyntaxSupport OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The 'xcmGenOptionValueSyntax' values supported for ANY
conceptual row in the 'xcmGenOptionTable'.
Usage: Conforming management agents SHALL report their
supported values as a 'bit-mask' formed via the bit-wise OR of
'2**(n)', where (n) is each supported enumerated value in the
in the 'XcmGenOptionValueSyntax' textual convention."
REFERENCE "
See: 'XcmGenOptionValueSyntax' in the XCMI General TC"
DEFVAL { 0 } -- no option syntax support
::= { xcmGenBaseEntry 8 }
xcmGenBaseReconfStateSupport OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The 'xcmGenReconfOptionState' values supported for ANY
conceptual row in the 'xcmGenReconfTable'.
Usage: Conforming management agents SHALL report their
supported values as a 'bit-mask' formed via the bit-wise OR of
'2**(n)', where (n) is each supported enumerated value in the
in the 'XcmGenReconfOptionState' textual convention."
REFERENCE "
See: 'XcmGenReconfOptionState' in the XCMI General TC"
DEFVAL { 0 } -- no reconf state support
::= { xcmGenBaseEntry 9 }
xcmGenBaseSNMPDomainSupport OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object is used to specify ALL transport domains (address
and name spaces) which are supported by this management agent
for SNMP protocol traffic (SNMP responses, SNMP traps, etc),
in ALL versions specified by 'xcmGenBaseSNMPVersionSupport'.
This object is also used to allow the 'xcmGenTrapClientTable' to
be used with any URI scheme (e.g., 'mailto:') for notifications,
by specifying 'uriNotifyDomain'.
Usage: Conforming management agents SHALL report their
supported values as a 'bit-mask' formed via the bit-wise OR of
'2**(n)', where (n) is each supported enumerated value in the
in the 'XcmGenSNMPDomain' textual convention."
REFERENCE "
See: 'XcmGenSNMPDomain' in the XCMI General TC
See: 'xcmGenTrapClientSNMP[Domain|Version]'."
-- DEFVAL intentionally omitted - agents SHALL report their support
::= { xcmGenBaseEntry 10 }
xcmGenBaseSNMPTrapSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object SHALL be 'true' if this management agent
supports SNMP traps (in any SNMP domain and SNMP version)
and MAY support the 'xcmGenTrapClientTable'.
This object SHALL be 'false' if this management agent does NOT
support SNMP traps (in any SNMP domain and SNMP version)
and does NOT support the 'xcmGenTrapClientTable'."
REFERENCE "
See: 'xcmGenBaseGroupSupport' for 'xcmGenTrapClientTable'"
-- DEFVAL intentionally omitted - agents SHALL report their support
::= { xcmGenBaseEntry 11 }
xcmGenBaseSNMPVersionSupport OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object is used to specify ALL SNMP versions (RFC 1157, RFC
1905, etc) which are supported by this management agent
for SNMP protocol traffic (SNMP responses, SNMP traps, etc),
in ALL domains specified by 'xcmGenBaseSNMPDomainSupport'.
Usage: Conforming management agents SHALL report their
supported values as a 'bit-mask' formed via the bit-wise OR of
'2**(n)', where (n) is each supported enumerated value in the
in the 'XcmGenSNMPVersion' textual convention."
REFERENCE "
See: 'XcmGenSNMPVersion' in the XCMI General TC
See: 'xcmGenTrapClientSNMP[Domain|Version]'."
-- DEFVAL intentionally omitted - agents SHALL report their support
::= { xcmGenBaseEntry 12 }
xcmGenBaseSNMPReadCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to specify a 'read community name' valid
for use in SNMPv1c and SNMPv2c 'Get|GetNext|GetBulk' PDUs
received (SNMP requests) and generated (SNMP responses)
by this management agent.
Usage: Note that the object 'xcmGenBaseSNMPWriteCommunity'
SHALL ALSO be used to specify a 'read community name' valid
for use in SNMPv1c and SNMPv2c 'Get|GetNext|GetBulk'
PDUs received (SNMP requests) and generated (SNMP responses)
by this management agent. Note however that the object
'xcmGenBaseSNMPTrapCommunity' SHALL NOT be used to specify a
'read community name' valid in SNMP 'Get|GetNext|GetBulk'.
Note: XCMI-defined community name objects support 64 octets
maximum length and configurable charsets, for consistency with
the 'snmpCommunityName' object defined in the SNMP Community MIB
defined in RFC 2576 (March 2000).
Note: Products MAY ship with a market-specific factory default
locale with a charset other than 'utf-8', eg, in Japan a product
might factory default to 'shift-jis(17)' or 'iso-2022-jp(39)'.
Such products MUST implement the 'xcmGenFixedLocalizationTable',
to prevent ambiguity about the factory default charset.
Usage: For best interworking with the ('utf-8' charset ONLY)
closely related 'snmpCommunitySecurityName' object in RFC 2576,
conforming management stations and management agents SHOULD NOT
configure community names longer than 32 octets.
Usage: For best interworking with third-party applications,
conforming management stations and management agents SHOULD NOT
configure empty (zero-length or all spaces) community names.
Usage: All XCMI conforming management agents SHALL treat
a valid 'write community name' as a valid 'read community name'
and SHALL NOT increment 'snmpInBadCommunityNames' (unknown name)
or 'snmpInBadCommunityUses' (wrong community name for operation)
counters in the SNMPv2 Agent MIB (RFC 1907).
Usage: All XCMI conforming management agents are
STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest
to this object, changing the system 'read community name'
(for best interworking with third-party management stations).
Usage: All XCMI conforming management agents: a) SHALL
return a zero length string in response to an SNMP GetRequest of
this object; b) are STRONGLY RECOMMENDED to default
this object to the string 'public' (in the static charset); and
c) MAY support multiple valid 'read community names' (by using
'xcmGenBaseReadCommunity' as a 'window' to a community list via
'device[Set|List]' device operations in the Device Mgmt group
of the XCMI Host Resources Ext MIB).
Usage: This object is of type 'XcmFixedLocaleDisplayString',
with an (opaque) locale and an explicit charset which is
specified in the 'xcmGenLocalizationCharSet' object indexed
by 'hrDeviceIndex' per 'xcmGenBaseSystemHrDeviceIndex' and
'xcmGenLocalizationIndex' per 'xcmGenFixedLocalizationIndex'.
If 'xcmGenLocalizationTable' or 'xcmGenFixedLocalizationTable'
are not implemented on this host system, then the charset SHALL
be 'utf-8(106)', ISO 10646-1 in 'UTF-8' stream encoding.
Usage: All XCMI conforming management agents SHALL allow
any defined character in the configured charset of this object.
All XCMI conforming management stations SHOULD NOT write control
characters or other non-display characters into this object.
WARNING: Changing the only valid 'read community name' of an
SNMP management agent will cause a COMPLETE loss of
communications unless all associated SNMP management stations
(clients) ALSO change over to the new 'read community name'!!!"
REFERENCE "
See: SNMPv1c (RFC 1157) and SNMPv2c (RFC 1905).
See: 'Coexistence between SNMPv1, SNMPv2, and SNMPv3'
RFC 2576, March 2000.
See: 'xcmGenBaseSNMP[Write|Trap]Community'."
-- DEFVAL intentionally omitted - SHOULD be 'public' in static charset
::= { xcmGenBaseEntry 13 }
xcmGenBaseSNMPWriteCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to specify a 'write community name' valid
for use in SNMPv1c and SNMPv2c 'Set' PDUs
received (SNMP requests) and generated (SNMP responses)
by this management agent.
Usage: Note that the object 'xcmGenBaseSNMPWriteCommunity'
SHALL ALSO be used to specify a 'read community name' valid
for use in SNMPv1c and SNMPv2c 'Get|GetNext|GetBulk'
PDUs received (SNMP requests) and generated (SNMP responses)
by this management agent. Note however that the object
'xcmGenBaseSNMPTrapCommunity' SHALL NOT be used to specify a
'read community name' valid in SNMP 'Get|GetNext|GetBulk'.
Usage: All XCMI conforming management agents SHALL treat
a valid 'write community name' as a valid 'read community name'
and SHALL NOT increment 'snmpInBadCommunityNames' (unknown name)
or 'snmpInBadCommunityUses' (wrong community name for operation)
counters in the SNMPv2 Agent MIB (RFC 1907).
Note: XCMI-defined community name objects support 64 octets
maximum length and configurable charsets, for consistency with
the 'snmpCommunityName' object defined in the SNMP Community MIB
defined in RFC 2576 (March 2000).
Note: Products MAY ship with a market-specific factory default
locale with a charset other than 'utf-8', eg, in Japan a product
might factory default to 'shift-jis(17)' or 'iso-2022-jp(39)'.
Such products MUST implement the 'xcmGenFixedLocalizationTable',
to prevent ambiguity about the factory default charset.
Usage: For best interworking with the ('utf-8' charset ONLY)
closely related 'snmpCommunitySecurityName' object in RFC 2576,
conforming management stations and management agents SHOULD NOT
configure community names longer than 32 octets.
Usage: For best interworking with third-party applications,
conforming management stations and management agents SHOULD NOT
configure empty (zero-length or all spaces) community names.
Usage: All XCMI conforming management agents are
STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest
to this object, changing the system 'write community name'
(for best interworking with third-party management stations).
Usage: All XCMI conforming management agents: a) SHALL
return a zero length string in response to an SNMP GetRequest of
this object; b) are STRONGLY RECOMMENDED to default
this object to the string 'public' (in the static charset); and
c) MAY support multiple valid 'write community names' (by using
'xcmGenBaseWriteCommunity' as a 'window' to a community list via
'device[Set|List]' device operations in the Device Mgmt group
of the XCMI Host Resources Ext MIB).
Usage: This object is of type 'XcmFixedLocaleDisplayString'
(see DESCRIPTION of 'xcmGenBaseSNMPReadCommunity' above).
If 'xcmGenLocalizationTable' or 'xcmGenFixedLocalizationTable'
are not implemented on this host system, then the charset SHALL
be 'utf-8(106)', ISO 10646-1 in 'UTF-8' stream encoding.
Usage: All XCMI conforming management agents SHALL allow
any defined character in the configured charset of this object.
All XCMI conforming management stations SHOULD NOT write control
characters or other non-display characters into this object.
Usage: When an SNMP management stations CHANGES the value of
this 'write community name', an XCMI conforming management agent
SHALL use the old (previous) 'write community name' when
generating the SNMP response to the 'Set' PDU, for consistency.
WARNING: Changing the only valid 'write community name' of an
SNMP management agent will cause a COMPLETE loss of
communications unless all associated SNMP management stations
(clients) ALSO change over to the new 'write community name'!!!"
REFERENCE "
See: SNMPv1c (RFC 1157) and SNMPv2c (RFC 1905).
See: 'Coexistence between SNMPv1, SNMPv2, and SNMPv3'
RFC 2576, March 2000.
See: 'xcmGenBaseSNMP[Read|Trap]Community'."
-- DEFVAL intentionally omitted - SHOULD be 'public' in static charset
::= { xcmGenBaseEntry 14 }
xcmGenBaseSNMPTrapCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object is used to specify a 'trap community name' valid
for use in SNMPv1c and SNMPv2c 'Inform|Trap' PDUs
received (SNMP requests) and generated (SNMP traps)
by this management agent.
Usage: Note that the object 'xcmGenBaseSNMPWriteCommunity'
SHALL ALSO be used to specify a 'read community name' valid
for use in SNMPv1c and SNMPv2c 'Get|GetNext|GetBulk'
PDUs received (SNMP requests) and generated (SNMP responses)
by this management agent. Note however that the object
'xcmGenBaseSNMPTrapCommunity' SHALL NOT be used to specify a
'read community name' valid in SNMP 'Get|GetNext|GetBulk'.
Note: XCMI-defined community name objects support 64 octets
maximum length and configurable charsets, for consistency with
the 'snmpCommunityName' object defined in the SNMP Community MIB
defined in RFC 2576 (March 2000).
Note: Products MAY ship with a market-specific factory default
locale with a charset other than 'utf-8', eg, in Japan a product
might factory default to 'shift-jis(17)' or 'iso-2022-jp(39)'.
Such products MUST implement the 'xcmGenFixedLocalizationTable',
to prevent ambiguity about the factory default charset.
Usage: For best interworking with the ('utf-8' charset ONLY)
closely related 'snmpCommunitySecurityName' object in RFC 2576,
conforming management stations and management agents SHOULD NOT
configure community names longer than 32 octets.
Usage: For best interworking with third-party applications,
conforming management stations and management agents SHOULD NOT
configure empty (zero-length or all spaces) community names.
Usage: All XCMI conforming management agents are
STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest
to this object, changing the system 'trap community name'
(for best interworking with third-party management stations).
Usage: All XCMI conforming management agents: a) SHALL
return a zero length string in response to an SNMP GetRequest of
this object; b) are STRONGLY RECOMMENDED to default
this object to the string 'public' (in the static charset); and
c) MAY support multiple valid 'trap community names' (by using
'xcmGenBaseTrapCommunity' as a 'window' to a community list via
'device[Set|List]' device operations in the Device Mgmt group
of the XCMI Host Resources Ext MIB).
Usage: This object is of type 'XcmFixedLocaleDisplayString'
(see DESCRIPTION of 'xcmGenBaseSNMPReadCommunity' above).
If 'xcmGenLocalizationTable' or 'xcmGenFixedLocalizationTable'
are not implemented on this host system, then the charset SHALL
be 'utf-8(106)', ISO 10646-1 in 'UTF-8' stream encoding.
Usage: All XCMI conforming management agents SHALL allow
any defined character in the configured charset of this object.
All XCMI conforming management stations SHOULD NOT write control
characters or other non-display characters into this object.
WARNING: Changing the only valid 'trap community name' of an
SNMP management agent will cause a COMPLETE loss of
communications unless all associated SNMP management stations
(clients) ALSO change over to the new 'trap community name'!!!"
REFERENCE "
See: SNMPv1c (RFC 1157) and SNMPv2c (RFC 1905).
See: 'Coexistence between SNMPv1, SNMPv2, and SNMPv3'
RFC 2576, March 2000.
See: 'xcmGenBaseSNMP[Read|Write]Community'.
See: 'xcmGenTrapClientSNMPCommunity'."
-- DEFVAL intentionally omitted - SHOULD be 'public' in static charset
::= { xcmGenBaseEntry 15 }
xcmGenBaseGroupWalkHidden OBJECT-TYPE
SYNTAX XcmGenGroupSupport
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
The terse control/report vector of ALL mandatory, conditionally
mandatory, and optional XCMI General MIB object groups which are
hidden from MIB walks (via SNMP GetNext or GetBulk PDUs)
by this management agent implementation (ie, version)
on this host system, specified in a bit-mask.
Usage: When an object group is currently 'hidden' via
'xcmGenBaseGroupWalkHidden', XCMI conforming management agents
SHALL skip over that object group to the next
lexicographically higher object for GetNext or GetBulk requests.
Usage: Conforming management agents SHOULD hide the Message Map
Message Text object groups from MIB walks (as they MAY contain
thousands of conceptual rows in typical implementations).
Usage: Conforming management agents SHALL accurately
report their hidden MIB walk XCMI General MIB object groups."
-- The following DEFVAL 'hides' Message Map and Message Text groups
DEFVAL { 12288 } -- hidden MIB walk groups
::= { xcmGenBaseEntry 16 }
xcmGenBaseNotifySchemeSupport OBJECT-TYPE
SYNTAX XcmGenNotifySchemeSupport
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL notification URI schemes
which are supported by this management agent implementation
(ie, version) on this host system, specified in a bit-mask.
Usage: Conforming management agents SHALL accurately
report their support for notification URI schemes."
REFERENCE "
See: 'XcmGenNotifySchemeSupport' in XCMI General TC.
See: 'xcmGenBaseSNMPDomainSupport' in XCMI General MIB."
DEFVAL { 1 } -- SNMP (traps)
::= { xcmGenBaseEntry 17 }
xcmGenBaseNotifySeveritySupport OBJECT-TYPE
SYNTAX XcmGenNotifySeverityFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL notification severity
filters supported by this management agent implementation
(ie, version) on this host system, specified in a bit-mask.
Usage: Individual trap definitions MAY further constrain which
notifications are 'in scope'.
Usage: Conforming management agents SHALL accurately
report their support for notification severity filters."
REFERENCE "
See: 'prtAlertSeverityLevel' in IETF Printer MIB (RFC 1759).
See: 'XcmGenNotifySeverityFilter' in XCMI General TC.
See: 'xcmGenTrapViewNotifySeverity' in XCMI General MIB."
DEFVAL { 15 } -- report, warning, error
::= { xcmGenBaseEntry 18 }
xcmGenBaseNotifyTrainingSupport OBJECT-TYPE
SYNTAX XcmGenNotifyTrainingFilter
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The terse conformance statement of ALL notification training
filters supported by this management agent implementation
(ie, version) on this host system, specified in a bit-mask.
Usage: Individual trap definitions MAY further constrain which
notifications are 'in scope'.
Usage: Conforming management agents SHALL accurately
report their support for notification training filters."
REFERENCE "
See: 'prtAlertTrainingLevel' in IETF Printer MIB (RFC 1759).
See: 'XcmGenNotifyTrainingFilter' in XCMI General TC.
See: 'xcmGenTrapViewNotifyTraining' in XCMI General MIB."
DEFVAL { 60 } -- none, trained, service, mgmt
::= { xcmGenBaseEntry 19 }
xcmGenBaseSystem1284DeviceId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The value of this variable MUST exactly match the
IEEE 1284-2000 Device ID string, except the length field MUST
NOT be specified. The value is assigned by the Printer vendor
and MUST NOT be localized by the agent.
The IEEE 1284-2000 Device ID is a length field followed by a
case-sensitive string of ASCII characters defining peripheral
characteristics and/or capabilities. For the purposes of this
specification, the length bytes MUST NOT be included. The
Device ID sequence is composed of a series of keys and values
of the form:
key: value {,value} repeated for each key
As indicated, each key will have one value, and MAY have more
than one value. The minimum necessary keys (case-sensitive) are
MANUFACTURER, COMMAND SET, and MODEL.
(These keys MAY be abbreviated as MFG, CMD, and MDL
respectively.) Each implementation MUST supply these three keys
and possibly additional ones as well. Each key (and each value)
is a string of characters. Any characters except colon (:),
comma (,), and semi-colon (;) MAY be included as part of the
key (or value) string. Any leading or trailing white space in
the string is ignored by the parsing program (but is still
counted as part of the overall length of the sequence).
An example ID String, showing optional comment and active
command set keys and their associated values (the text is
actually all on one line):
MFG:Xerox;
CMD:PCL,POSTSCRIPT,PJL;
MDL:WorkCentre Pro 32C;
CLS:PRINTER;
DES: Xerox WorkCentre Pro 32C"
::= { xcmGenBaseEntry 20 }
xcmGenBaseSNMPWarningTrapSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "
This object SHALL be 'true' if this management agent
supports sending SNMP warning traps. This object SHALL
be 'false'if this management agent does NOT support
sending SNMP warning traps.
This does not change the behavior of support for
sending 'Error Cleared' traps such sending a
trap when an alertRemovalOfBinaryChangeEntry
is added to the Alert Table."
DEFVAL { false } -- only critical traps are issued
::= { xcmGenBaseEntry 21 }
--
-- Current Localization Group (Cond Mandatory)
--
-- This group controls the localization of dynamic string objects
-- of type 'InternationalDisplayString' in legacy MIBs.
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for all systems which support MIB objects with type
-- 'InternationalDisplayString'
-- and optional for all other systems.
--
xcmGenCurrentLocalization OBJECT IDENTIFIER ::= { xcmGeneralMIB 3 }
xcmGenCurrentLocalizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenCurrentLocalizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of general localization information per device. It is
put in a table so it can be per device using the hrDeviceIndex."
::= { xcmGenCurrentLocalization 1 }
xcmGenCurrentLocalizationEntry OBJECT-TYPE
SYNTAX XcmGenCurrentLocalizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
Contains the scalar objects that we want to be per device."
INDEX { hrDeviceIndex }
::= { xcmGenCurrentLocalizationTable 1 }
XcmGenCurrentLocalizationEntry ::= SEQUENCE {
-- Current Localization Info
xcmGenCurrentLocalizationIndex Ordinal16,
xcmGenCurrLocalizationRowStatus RowStatus
}
xcmGenCurrentLocalizationIndex OBJECT-TYPE
SYNTAX Ordinal16
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of the 'xcmGenLocalizationIndex' corresponding to the
current language, country, and character set which SHALL be
used for all objects of type 'InternationalDisplayString' in
all legacy MIBs.
Note the Printer MIB has a similar mechanism which controls only
objects (of type OCTET STRING) which are in the Printer MIB."
::= { xcmGenCurrentLocalizationEntry 1 }
xcmGenCurrLocalizationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenCurrentLocalizationTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenCurrLocalizationRowStatus' row status object; and
SHALL clear the 'xcmGenCurrentLocalizationGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenCurrLocalizationRowStatus' row status object; and
SHALL set the 'xcmGenCurrentLocalizationGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations NEED NOT support dynamic row
creation (via 'createAndGo(4)') nor dynamic row deletion (via
'destroy(6)').
Usage: Conforming implementations MAY support a single, static
conceptual row, but SHALL allocate that row with an
'hrDeviceIndex' value of one ('1').
Usage: This row status SHALL be set, to 'active(1)' (for
static rows) or 'createAndGo(4)' (for dynamic rows),
in the same PDU which sets the
current locale in 'xcmGenCurrentLocalizationIndex'
(thus activating/allocating this conceptual row).
Usage: To explicitly release this conceptual row, a management
station SHALL set 'xcmGenCurrLocalizationRowStatus' to
'notInService(2)' (for static rows) or 'destroy(6)' (for dynamic
rows).
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenCurrentLocalizationEntry 2 }
--
-- General Localization Group (Cond Mandatory)
--
-- This group declares supported localizations for string objects
-- of type 'InternationalDisplayString' in legacy MIBs and
-- of type 'XcmFixedLocaleDisplayString'
-- or 'Xcm[Fixed|Mamed]LocaleUtf8String' in XCMI MIBs.
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for all systems which support MIB objects with type
-- 'InternationalDisplayString', 'XcmFixedLocaleDisplayString',
-- 'XcmFixedLocaleUtf8String', or 'XcmNamedLocaleUtf8String'
-- and optional for all other systems.
--
xcmGenLocalization OBJECT IDENTIFIER ::= { xcmGeneralMIB 4 }
xcmGenLocalizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenLocalizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
The available localizations in this device."
::= { xcmGenLocalization 1 }
xcmGenLocalizationEntry OBJECT-TYPE
SYNTAX XcmGenLocalizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry exists in this table for each Localization, i.e. for
each combination of Language, Country (or Territory) and Coded
Character Set, that is supported in some objects of type
'InternationalDisplayString', 'XcmFixedLocaleDisplayString',
'XcmFixedLocaleUtf8String', or 'XcmNamedLocaleUtf8String'
for each device on this managed system."
INDEX { hrDeviceIndex,
xcmGenLocalizationIndex }
::= { xcmGenLocalizationTable 1 }
XcmGenLocalizationEntry ::= SEQUENCE {
-- Supported Localization Info
xcmGenLocalizationIndex Ordinal16,
xcmGenLocalizationRowStatus RowStatus,
xcmGenLocalizationASCIIName DisplayString,
xcmGenLocalizationName InternationalDisplayString,
xcmGenLocalizationLanguage CodedLanguage,
xcmGenLocalizationCountry CodedCountry,
xcmGenLocalizationCharSet IANACharset
}
xcmGenLocalizationIndex OBJECT-TYPE
SYNTAX Ordinal16
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by the device to identify this
localization entry."
::= { xcmGenLocalizationEntry 1 }
xcmGenLocalizationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenLocalizationTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenLocalizationRowStatus' row status object; and
SHALL clear the 'xcmGenLocalizationGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenLocalizationRowStatus' row status object; and
SHALL set the 'xcmGenLocalizationGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenLocalizationEntry 2 }
xcmGenLocalizationASCIIName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The unlocalized human readable name in NVT ASCII of the
localization with the language, followed by the country
(or territory), followed by the character set.
Example: English US ASCII"
DEFVAL { ''H }
::= { xcmGenLocalizationEntry 3 }
xcmGenLocalizationName OBJECT-TYPE
SYNTAX InternationalDisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The localized human readable name of the localization with
the language, followed by the country (or territory),
followed by the character set.
Example: Japanese Japan Kanji (Represented with Kanji chars.)"
DEFVAL { ''H } -- no specified name
::= { xcmGenLocalizationEntry 4 }
xcmGenLocalizationLanguage OBJECT-TYPE
SYNTAX CodedLanguage
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
A two character language abreviation from ISO 639:1988
- Codes For the Representation of Names of Languages.
Examples EN, GB, CA, FR, DE."
DEFVAL { ''H } -- no specified language
::= { xcmGenLocalizationEntry 5 }
xcmGenLocalizationCountry OBJECT-TYPE
SYNTAX CodedCountry
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
A two character country or territory abbreviation from
ISO 3166:1993 - Codes for the Representation of Names of
Countries.
Examples: US, FR, DE, ..."
DEFVAL { ''H } -- no specified country or territory
::= { xcmGenLocalizationEntry 6 }
xcmGenLocalizationCharSet OBJECT-TYPE
SYNTAX IANACharset
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The charset used for this localization.
The value is the enum for the charset registered
with IANA. See the 'IANACharset' textual-convention in the
Printer MIB (RFC 1759)."
DEFVAL { other } -- no specified charset
::= { xcmGenLocalizationEntry 7 }
--
-- Code Indexed String Group (Cond Mandatory)
--
-- This is a group to control the charset representation
-- of charset-indexed string objects that use the CodeIndexedStringIndex
-- types in new MIBs.
--
-- Implementation of the xcmGenIndexedStringGroup is
-- conditionally mandatory: Mandatory for all systems which
-- implement MIB objects of type 'CodeIndexedStringIndex' or
-- implement the 'xcmGenCodedCharSetGroup'.
--
-- Contains all the current charset-indexed strings for this device.
--
xcmGenCodeIndexedString OBJECT IDENTIFIER ::= { xcmGeneralMIB 5 }
xcmGenCodeIndexedStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenCodeIndexedStringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
The current charset-indexed strings for this device."
::= { xcmGenCodeIndexedString 1 }
xcmGenCodeIndexedStringEntry OBJECT-TYPE
SYNTAX XcmGenCodeIndexedStringEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry exists in this table containing a charset-indexed
string in a particular charset. There are separate sets of
charset-indexed strings for each device.
If an agent supports multiple charset representations
of a charset-indexed string, including code conversion between,
there will be a separate entry for each such charset
representation.
Usage: 'xcmGenCodeIndexedStringCharSet' selects which charset
representation is to be returned. The value of
'xcmGenCodeIndexedStringCharSet' is the charset enum
registered with IANA. See the 'IANACharset' textual-convention
in the Printer MIB (RFC 1759).
Usage: Conforming management agents SHALL NOT 'reuse' values of
'xcmGenCodeIndexedStringIndex' until its' 32-bit value wraps.
This prevents access to 'xcmGenCodeIndexedStringData' contents
via 'stale' pointers (previously cached from XCMI Job Monitoring
MIB or XCMI Resources MIB).
Note: Conforming management stations SHOULD interwork with
earlier (pre-XCMI 3.1) management agents which MAY 'reuse'
values of 'xcmGenCodeIndexedStringIndex'. By first reading the
pointer object in XCMI Job Monitoring MIB or XCMI Resources MIB,
the manager will avoid 'stale' pointer processing errors."
INDEX { hrDeviceIndex,
xcmGenCodeIndexedStringIndex,
xcmGenCodeIndexedStringCharSet }
::= { xcmGenCodeIndexedStringTable 1 }
XcmGenCodeIndexedStringEntry ::= SEQUENCE {
-- Code Indexed String Info
xcmGenCodeIndexedStringIndex CodeIndexedStringIndex,
xcmGenCodeIndexedStringCharSet IANACharset, -- an index
xcmGenCodeIndexedStringRowStat RowStatus,
xcmGenCodeIndexedStringData OCTET STRING
}
xcmGenCodeIndexedStringIndex OBJECT-TYPE
SYNTAX CodeIndexedStringIndex (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by the device, along with the following
'xcmGenCodeIndexedStringCharSet', to identify this
charset-indexed string entry.
Usage: Conforming management agents SHALL NOT 'reuse' values of
'xcmGenCodeIndexedStringIndex' until its' 32-bit value wraps.
This prevents access to 'xcmGenCodeIndexedStringData' contents
via 'stale' pointers (previously cached from XCMI Job Monitoring
MIB or XCMI Resources MIB).
Note: Conforming management stations SHOULD interwork with
earlier (pre-XCMI 3.1) management agents which MAY 'reuse'
values of 'xcmGenCodeIndexedStringIndex'. By first reading the
pointer object in XCMI Job Monitoring MIB or XCMI Resources MIB,
the manager will avoid 'stale' pointer processing errors."
::= { xcmGenCodeIndexedStringEntry 1 }
xcmGenCodeIndexedStringCharSet OBJECT-TYPE
SYNTAX IANACharset
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
The charset used for this charset-indexed string entry.
Usage: The value is the enum for the charset registered
with IANA. See the 'IANACharset' textual-convention in the
Printer MIB (RFC 1759)."
::= { xcmGenCodeIndexedStringEntry 2 }
xcmGenCodeIndexedStringRowStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenCodeIndexedStringTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenCodeIndexedStringRowStat' row status object; and
SHALL clear the 'xcmGenCodeIndexedStringGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenCodeIndexedStringRowStat' row status object; and
SHALL set the 'xcmGenCodeIndexedStringGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenCodeIndexedStringEntry 3 }
xcmGenCodeIndexedStringData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This is the actual charset-indexed string data, in the charset
identified by 'xcmGenCodeIndexedStringCharSet'."
DEFVAL { ''H } -- no specified charset-indexed string data
::= { xcmGenCodeIndexedStringEntry 4 }
--
-- Coded Char Set Group (Cond Mandatory)
--
-- This is a group to control the charset representation
-- of charset-indexed string objects that use the CodeIndexedStringIndex
-- types in new MIBs.
--
-- Implementation of the xcmGenCodedCharSetGroup group is
-- conditionally mandatory: Mandatory for all systems which
-- implement MIB objects of type 'CodeIndexedStringIndex' or
-- implement the 'xcmGenCodeIndexedStringGroup'.
--
-- Contains the charset identifications of the IANA-registered
-- charsets supported by this device for representing charset-indexed
-- strings.
xcmGenCodedCharSet OBJECT IDENTIFIER ::= { xcmGeneralMIB 6 }
xcmGenCodedCharSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenCodedCharSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
The supported charsets for this device."
::= { xcmGenCodedCharSet 1 }
xcmGenCodedCharSetEntry OBJECT-TYPE
SYNTAX XcmGenCodedCharSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry exists in this table for each charset
supported in some objects of 'CodeIndexedStringIndex' type for
each device."
INDEX { hrDeviceIndex,
xcmGenCodedCharSetCharSet }
::= { xcmGenCodedCharSetTable 1 }
XcmGenCodedCharSetEntry ::= SEQUENCE {
-- Supported Coded Chararcter Set Info
xcmGenCodedCharSetCharSet IANACharset,
xcmGenCodedCharSetRowStatus RowStatus,
xcmGenCodedCharSetASCIIName DisplayString
}
xcmGenCodedCharSetCharSet OBJECT-TYPE
SYNTAX IANACharset
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
The supported charset enum identifier, used an index
for this table. The value is the enum for the charset
registered with IANA."
REFERENCE "
See the 'IANACharset' textual-convention in the Printer MIB."
::= { xcmGenCodedCharSetEntry 1 }
xcmGenCodedCharSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenCodedCharSetTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenCodedCharSetRowStatus' row status object; and
SHALL clear the 'xcmGenCodedCharSetGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenCodedCharSetRowStatus' row status object; and
SHALL set the 'xcmGenCodedCharSetGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations NEED NOT support dynamic row
creation (via 'createAndGo(4)') nor dynamic row deletion (via
'destroy(6)').
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenCodedCharSetEntry 2 }
xcmGenCodedCharSetASCIIName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The unlocalized human readable name in ASCII of the
charset.
Example: 'ASCII'"
DEFVAL { ''H } -- no specified name
::= { xcmGenCodedCharSetEntry 3 }
--
-- Fixed Localization Group (Cond Mandatory)
--
-- This group controls the localization of static string objects
-- of type 'XcmFixedLocaleDisplayString'
-- or 'Xcm[Fixed|Mamed]LocaleUtf8String' in XCMI MIBs.
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for all systems which support MIB objects with type
-- 'XcmFixedLocaleDisplayString',
-- 'XcmFixedLocaleUtf8String', or 'XcmNamedLocaleUtf8String'
-- and optional for all other systems.
--
xcmGenFixedLocalization OBJECT IDENTIFIER ::= { xcmGeneralMIB 7 }
xcmGenFixedLocalizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenFixedLocalizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of fixed localization information per device. It is
put in a table so it can be per device using the hrDeviceIndex."
REFERENCE "
See: 'XcmFixedLocale[Display|Utf8]String' in the
XCMI General TC."
::= { xcmGenFixedLocalization 1 }
xcmGenFixedLocalizationEntry OBJECT-TYPE
SYNTAX XcmGenFixedLocalizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry of fixed localization information per device."
REFERENCE "
See: 'XcmFixedLocale[Display|Utf8]String' in the
XCMI General TC."
INDEX { hrDeviceIndex }
::= { xcmGenFixedLocalizationTable 1 }
XcmGenFixedLocalizationEntry ::= SEQUENCE {
-- Fixed Localization Info
xcmGenFixedLocalizationIndex Ordinal16,
xcmGenFixedLocalizationRowStat RowStatus
}
xcmGenFixedLocalizationIndex OBJECT-TYPE
SYNTAX Ordinal16
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of the 'xcmGenLocalizationIndex' corresponding to the
current language, country, and character set which SHALL be
used for all objects of type 'XcmFixedLocaleDisplayString'
in all current and future MIBs.
Also, the value of the 'xcmGenLocalizationIndex' corresponding
to the language and country (but FIXED UTF-8) which SHALL be
used for all objects of type 'XcmFixedLocaleUtf8String'
in all current and future MIBs."
REFERENCE "
See: 'XcmFixedLocale[Display|Utf8]String' in the
XCMI General TC.
See: 'UTF-8, a transformation of ISO 10646' (RFC 2279) and
'IETF Policy on Character Sets and Languages' (RFC 2277)."
::= { xcmGenFixedLocalizationEntry 1 }
xcmGenFixedLocalizationRowStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenFixedLocalizationTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenFixedLocalizationRowStat' row status object; and
SHALL clear the 'xcmGenFixedLocalizationGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenFixedLocalizationRowStat' row status object; and
SHALL set the 'xcmGenFixedLocalizationGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations NEED NOT support dynamic row
creation (via 'createAndGo(4)') nor dynamic row deletion (via
'destroy(6)').
Usage: Conforming implementations MAY support a single, static
conceptual row, but SHALL allocate that row with an
'hrDeviceIndex' value of one ('1').
Usage: This row status SHALL be set, to 'active(1)' (for
static rows) or 'createAndGo(4)' (for dynamic rows),
in the same PDU which sets the
fixed locale in 'xcmGenFixedLocalizationIndex'
(thus activating/allocating this conceptual row).
Usage: To explicitly release this conceptual row, a management
station SHALL set 'xcmGenFixedLocalizationRowStat' to
'notInService(2)' (for static rows) or 'destroy(6)' (for dynamic
rows).
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenFixedLocalizationEntry 2 }
--
-- General Lock Group (Cond Mandatory)
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for systems which support advisory contention
-- locks, and optional for all other systems.
--
-- Implementation of this group is STRONGLY RECOMMENDED.
--
-- Implementation of this group is conditionally mandatory,
-- however it SHALL be implemented by systems which
-- implement the 'xcmGenReconfGroup' and 'xcmGenOptionGroup'.
--
xcmGenLock OBJECT IDENTIFIER ::= { xcmGeneralMIB 8 }
--
-- General Lock Simple Objects
--
xcmGenLockSimple OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This subtree is current. Subordinate objects are leaf objects."
::= { xcmGenLock 1 }
xcmGenLockSupportMaxTimer OBJECT-TYPE
SYNTAX Cardinal32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The advisory lock supported max owner timer (in seconds) for
use for ANY advisory lock in the 'xcmGenLockTable'.
Usage: The value zero ('0') represents 'no limit'.
Usage: This supported max timer represents an XCMI enhancement
to the traditional advisory lock mechanism used in existing IETF
MIB modules (eg, RFC 1573). It provides reliable information to
a management station contending for advisory locks, about the
MAXIMUM time supported (ie, permitted) for ANY advisory lock by
the management agent on this host system."
REFERENCE "
See: 'xcmGenLockCurrentMaxTimer' and 'xcmGenLockOwnerTimer'"
DEFVAL { 0 } -- no limit on support max timer
::= { xcmGenLockSimple 1 }
xcmGenLockCurrentMaxTimer OBJECT-TYPE
SYNTAX Cardinal32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The advisory lock current max owner timer (in seconds) in
use for ANY advisory lock in the 'xcmGenLockTable'.
Usage: This current max timer represents an XCMI enhancement
to the traditional advisory lock mechanism used in existing IETF
MIB modules (eg, RFC 1573). It provides reliable information to
a management station contending for advisory locks, about the
current MAXIMUM time until expiration for ALL advisory locks for
the management agent on this host system.
Note: To acquire an advisory lock on an ENTIRE host system,
a conforming management station (or management agent) SHALL
examine 'xcmGenLockCurrentMaxTimer', add an appropriate
delta for eventual processing, and lock the 'xcmGenLockTable'
itself. When 'xcmGenLockCurrentLockCount' subsequently becomes
one (1), the requesting management station (or management agent)
has acquired a lock on the ENTIRE host system (since no OTHER
entity MAY acquire any further lock, because 'xcmGenLockTable'
has become 'read-only' to all other entities), and MAY proceed
accordingly."
REFERENCE "
See: 'xcmGenLockSupportMaxTimer' and 'xcmGenLockOwnerTimer'"
DEFVAL { 0 } -- no current max timer
::= { xcmGenLockSimple 2 }
xcmGenLockCurrentLockCount OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of entries (rows) which are currently in the 'active'
state in 'xcmGenLockTable'.
Usage: This current lock count represents an XCMI enhancement
to the traditional advisory lock mechanism used in existing IETF
MIB modules (eg, RFC 1573)."
REFERENCE "
See: 'xcmGenLockHighestLockIndex'"
DEFVAL { 0 } -- no current lock count
::= { xcmGenLockSimple 3 }
xcmGenLockHighestLockIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The highest advisory lock index which has been active in the
'xcmGenLockTable'.
Usage: This highest lock index represents an XCMI enhancement
to the traditional advisory lock mechanism used in existing IETF
MIB modules (eg, RFC 1573)."
REFERENCE "
See: 'xcmGenLockCurrentLockCount'"
DEFVAL { 0 } -- no highest lock index
::= { xcmGenLockSimple 4 }
xcmGenLockSupportMaxCount OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum number of simultaneous entries (rows) supported
for the 'xcmGenLockTable'.
Usage: The value zero ('0') represents 'no limit'."
REFERENCE "
See: 'xcmGenLockCurrentLockCount'"
DEFVAL { 0 } -- no limit on support max count
::= { xcmGenLockSimple 5 }
--
-- General Lock Table Objects
--
xcmGenLockTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenLockEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table containing 'advisory contention lock' objects for
various subtrees of MIB objects from the complete set of IETF
and XCMI MIB modules implemented by this host system.
Note: To acquire an advisory lock on an ENTIRE host system,
a conforming management station (or management agent) SHALL
examine 'xcmGenLockCurrentMaxTimer', add an appropriate
delta for eventual processing, and lock the 'xcmGenLockTable'
itself. When 'xcmGenLockCurrentLockCount' subsequently becomes
one (1), the requesting management station (or management agent)
has acquired a lock on the ENTIRE host system (since no OTHER
entity MAY acquire any further lock, because 'xcmGenLockTable'
has become 'read-only' to all other entities), and MAY proceed
accordingly."
REFERENCE "
See: 'ifTestOwner' and the 'OwnerString' textual convention
in Evolution of the Interfaces Group of MIB-II (RFC 1573)."
::= { xcmGenLock 2 }
xcmGenLockEntry OBJECT-TYPE
SYNTAX XcmGenLockEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry containing 'advisory contention lock' objects for one
specific subtree of MIB objects from the complete set of IETF
and XCMI MIB modules implemented by this host system."
INDEX { xcmGenLockIndex }
::= { xcmGenLockTable 1 }
XcmGenLockEntry ::= SEQUENCE {
-- General Lock Info
xcmGenLockIndex Ordinal32,
xcmGenLockRowStatus RowStatus,
xcmGenLockOwnerString OCTET STRING,
xcmGenLockOwnerSubtree OBJECT IDENTIFIER,
xcmGenLockOwnerTimer Cardinal32
}
--
-- General Lock Info
--
xcmGenLockIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by this host system to identify this
conceptual row in the 'xcmGenLockTable' - each conceptual row in
the 'xcmGenLockTable' represents an 'advisory contention lock'
on a specific subtree of MIB objects from the complete set of
IETF and XCMI MIB modules implemented by this host system."
REFERENCE "
See: 'XcmGenLockIndex' textual convention"
::= { xcmGenLockEntry 1 }
xcmGenLockRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenLockTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenLockRowStatus' row status object; and
SHALL clear the 'xcmGenLockGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenLockRowStatus' row status object; and
SHALL set the 'xcmGenLockGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations NEED NOT support dynamic row
creation (via 'createAndGo(4)') nor dynamic row deletion (via
'destroy(6)').
Usage: Conforming implementations MAY support a single, static
conceptual row, but SHALL allocate that row with an
'xcmGenLockIndex' value of one ('1').
Usage: Conforming management stations, when they first create
or activate rows in this table, SHALL set
'xcmGenLockRowStatus' to 'active(1)' (for static rows) or
'createAndGo(4)' (for dynamic rows),
'xcmGenLockOwnerString' (if an owner string is available),
'xcmGenLockOwnerSubtree' (if not 'zeroDotZero'), and
'xcmGenLockOwnerTimer' (to a suitable value)
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenLockOwnerString', or
'xcmGenLockOwnerSubtree'
AFTER row creation (these objects are 'write-once').
Usage: To explicitly release this advisory lock, the current
lock owner (management station or management agent) SHALL
set 'xcmGenLockRowStatus' in this row to 'notInService(2)' (for
static rows) or 'destroy(6)' (for dynamic rows).
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'xcmGenLockSupportMaxCount' (limit object).
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenLockEntry 2 }
xcmGenLockOwnerString OBJECT-TYPE
-- SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255))
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create -- 'write-once' (see below)
STATUS current
DESCRIPTION "
The advisory lock owner string corresponding to the current
'owner' of this advisory lock.
Usage: Conforming management stations, when they first create
or activate rows in this table, SHALL set
'xcmGenLockRowStatus' to 'active(1)' (for static rows) or
'createAndGo(4)' (for dynamic rows),
'xcmGenLockOwnerString' (if an owner string is available),
'xcmGenLockOwnerSubtree' (if not 'zeroDotZero'), and
'xcmGenLockOwnerTimer' (to a suitable value)
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenLockOwnerString', or
'xcmGenLockOwnerSubtree'
AFTER row creation (these objects are 'write-once').
Usage: This owner string SHALL contain one or more of
the following:
a) Textual form of the management station's transport address;
b) Management station name (eg, domain name); and/or
c) Network management person's name, location, or phone.
In the instance that the management agent itself is the 'owner',
this object SHALL be set to a string beginning with
'agent' (in English).
Usage: This object is of type 'XcmFixedLocaleDisplayString'."
REFERENCE "
See: 'xcmGenLockRowStatus', 'xcmGenLockOwnerSubtree', and
'xcmGenLockOwnerTimer'.
See: 'ifTestOwner' and the 'OwnerString' textual convention
in Evolution of the Interfaces Group of MIB-II (RFC 1573)."
DEFVAL { ''H } -- no owner string
::= { xcmGenLockEntry 3 }
xcmGenLockOwnerSubtree OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create -- 'write-once' (see below)
STATUS current
DESCRIPTION "
The advisory lock owner subtree (ie, scope) for the current
'owner' of this advisory lock.
Usage: Conforming management stations, when they first create
or activate rows in this table, SHALL set
'xcmGenLockRowStatus' to 'active(1)' (for static rows) or
'createAndGo(4)' (for dynamic rows),
'xcmGenLockOwnerString' (if an owner string is available),
'xcmGenLockOwnerSubtree' (if not 'zeroDotZero'), and
'xcmGenLockOwnerTimer' (to a suitable value)
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenLockOwnerString', or
'xcmGenLockOwnerSubtree'
AFTER row creation (these objects are 'write-once').
Usage: This owner subtree represents an XCMI enhancement to
the traditional advisory lock mechanism used in existing IETF
MIB modules (eg, RFC 1573)."
REFERENCE "
See: 'xcmGenLockRowStatus', 'xcmGenLockOwnerString', and
'xcmGenLockOwnerTimer'."
DEFVAL { zeroDotZero } -- no owner subtree
::= { xcmGenLockEntry 4 }
xcmGenLockOwnerTimer OBJECT-TYPE
SYNTAX Cardinal32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The advisory lock owner lock time remaining for the current
'owner' of this advisory lock (in seconds).
Usage: A conforming management agent MAY choose to reduce the
'credit' granted as a result of a set to this owner lock timer,
at its sole discretion (see 'xcmGenLockSupportMaxTimer' object).
Usage: Conforming management stations, when they first create
or activate rows in this table, SHALL set
'xcmGenLockRowStatus' to 'active(1)' (for static rows) or
'createAndGo(4)' (for dynamic rows),
'xcmGenLockOwnerString' (if an owner string is available),
'xcmGenLockOwnerSubtree' (if not 'zeroDotZero'), and
'xcmGenLockOwnerTimer' (to a suitable value)
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenLockOwnerString', or
'xcmGenLockOwnerSubtree'
AFTER row creation (these objects are 'write-once').
Usage: A conforming management station MAY choose to increase
or reduce the value of this owner lock timer, subsequent to
initial row creation, for example to 'refresh' the timer for an
additional time interval.
Usage: A conforming management station SHALL NOT reduce the
value of this owner lock timer to zero (as an indirect 'destroy'
operation). A conforming management agent SHALL reject
any such set to zero of this owner lock timer.
Usage: This owner lock timer represents an XCMI enhancement to
the traditional advisory lock mechanism used in existing IETF
MIB modules (eg, RFC 1573). It provides reliable information to
a management station (or management agent) contending for this
advisory lock, about the MAXIMUM time until this advisory lock
lock will be released (either by explicit action of the owner of
the advisory lock or by 'timeout' handling of the management
agent itself)."
REFERENCE "
See: 'xcmGenLockRowStatus', 'xcmGenLockOwnerSubtree', and
'xcmGenLockOwnerSubtree'."
-- DEFVAL intentionally omitted - managers or agents SHALL initialize
::= { xcmGenLockEntry 5 }
--
-- General Reconf Group (Cond Mandatory)
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for systems which support tree structured
-- atomic reconfiguration, and optional for all other systems.
--
-- Implementation of this group is conditionally mandatory,
-- however it SHALL be implemented by systems which
-- implement the 'xcmGenOptionGroup'.
--
-- Usage: Systems which implement the 'xcmGenReconfGroup'
-- and 'xcmGenOptionGroup' SHALL also implement
-- the 'xcmGenLockGroup' (for advisory contention locks).
xcmGenReconf OBJECT IDENTIFIER ::= { xcmGeneralMIB 9 }
--
-- General Reconf Simple Objects
--
xcmGenReconfSimple OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This subtree is current. Subordinate objects are leaf objects."
::= { xcmGenReconf 1 }
xcmGenReconfActivations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of SUCCESSFUL 'activations' of reconfiguration for
this host system: invoked by SUCCESSFUL writes to the
'xcmGenReconfOptionState' reconfiguration invocation object of
'activateFor[ImmediateChange|RebootChange|ImmediateReboot]';
and followed by SUCCESSFUL completions of 'activation' (without
errors reports in 'xcmGenReconfError[Index|Status]').
Usage: Although no default value ('DEFVAL' clause) is permitted
(by IETF SMIv2) for this counter, conforming host systems SHALL
zero this counter upon conceptual row creation."
REFERENCE "
See: 'xcmGenReconfOptionState'"
::= { xcmGenReconfSimple 1 }
xcmGenReconfEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of entries (rows) which are currently in the 'active'
state in 'xcmGenReconfTable'."
::= { xcmGenReconfSimple 2 }
xcmGenReconfSupportMaxCount OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum number of simultaneous entries (rows) supported
for the 'xcmGenReconfTable'.
Usage: The value zero ('0') represents 'no limit'."
DEFVAL { 0 } -- no limit on support max count
::= { xcmGenReconfSimple 3 }
--
-- General Reconf Table Objects
--
xcmGenReconfTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenReconfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table containing information on a 'reconfiguration request',
for use in atomic reconfiguration of this host system.
Usage: A conforming management station (or management agent)
SHALL lock 'xcmGenReconfTable' and 'xcmGenOptionTable'
before attempting to perform any 'reconfiguration request' on a
host system (via the 'xcmGenLockTable')."
::= { xcmGenReconf 2 }
xcmGenReconfEntry OBJECT-TYPE
SYNTAX XcmGenReconfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry containing information on a 'reconfiguration request',
for use in atomic reconfiguration of this host system.
Usage: The ONLY valid row in the 'xcmGenReconfTable' for each
supported device ('hrDeviceIndex') SHALL have an
'xcmGenReconfIndex' of one ('1')."
INDEX { hrDeviceIndex,
xcmGenReconfIndex }
::= { xcmGenReconfTable 1 }
XcmGenReconfEntry ::= SEQUENCE {
-- General Reconf Info
xcmGenReconfIndex Ordinal32,
xcmGenReconfRowStatus RowStatus,
xcmGenReconfOptionIndex Cardinal32,
xcmGenReconfOptionState XcmGenReconfOptionState,
xcmGenReconfErrorIndex Cardinal32,
xcmGenReconfErrorStatus XcmGenSNMPv2ErrorStatus
}
--
-- General Reconf Info
--
xcmGenReconfIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by this host system to identify this
conceptual row in the 'xcmGenReconfTable'.
Usage: The ONLY valid row in the 'xcmGenReconfTable' for each
supported device ('hrDeviceIndex') SHALL have an
'xcmGenReconfIndex' of one ('1')."
REFERENCE "
See: System, Device, and Software Installed/Running groups
in the IETF Host Resources MIB (RFC 2790).
See: Device Info, Device Mgmt, and Device Detail groups
in the XCMI Host Resources Ext MIB."
::= { xcmGenReconfEntry 1 }
xcmGenReconfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenReconfTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenReconfRowStatus' row status object; and
SHALL clear the 'xcmGenReconfGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenReconfRowStatus' row status object; and
SHALL set the 'xcmGenReconfGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming management agents SHALL support
'active(1)' and SHOULD support 'notInService(2)' or 'destroy(6)'
(to 'release' the 'reconfiguration request').
Usage: Conforming management agents NEED NOT support
'createAndGo(4)', and SHOULD NOT support 'notReady(3)' or
'createAndWait(5)'.
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'xcmGenReconfSupportMaxCount' (limit object).
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenReconfEntry 2 }
xcmGenReconfOptionIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of 'xcmGenOptionIndex' corresponding to the first
pending reconfiguration option (in 'xcmGenOptionTable'), or
zero if there are no pending reconfiguration options for this
host system.
Usage: This 'chain' represents pending reconfiguration
options of this host system."
REFERENCE "
See: 'xcmGenReconfActiveOptionIndex'"
DEFVAL { 0 } -- no entries
::= { xcmGenReconfEntry 3 }
xcmGenReconfOptionState OBJECT-TYPE
SYNTAX XcmGenReconfOptionState
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The processing state of ALL pending reconfiguration options of
this host system.
A write to this object by an (authorized) management station
invokes a request for validation (or activation) of ALL pending
reconfiguration options of this host system.
A read of this object returns 'idle', 'validateInProgress', or
'activateInProgress' to report the processing state of the last
'validate...' or 'activate...' request.
It is mandatory that a conforming management agent ensure that,
at system initialization, this object SHALL be set to a
value of 'idle'.
Usage: Conforming management agents SHALL 'reject' any
SNMP Set-Request to 'xcmGenReconfOptionState'
while another management operation is already in progress
(ie, while 'xcmGenReconfOptionState' is NOT equal to 'idle')
with 'badValue' (SNMPv1) or 'inconsistentValue' (SNMPv2/v3).
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this option state object."
REFERENCE "
See: 'xcmGenReconfError[Index|Status]'
See: 'XcmGenReconfOptionState', in the companion XCMI
CC TC, for details of 'validation' and 'activation' operations.
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
DEFVAL { idle } -- no reconfiguration processing
::= { xcmGenReconfEntry 4 }
xcmGenReconfErrorIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The value of 'xcmGenOptionIndex' corresponding to the first
pending reconfiguration option (in 'xcmGenOptionTable') which
was found to be 'in error' (during 'validate' or 'activate'
reconfiguration processing for this host system), or zero
if no error was found (eg, consistency, range, etc)."
REFERENCE "
See: 'xcmGenReconfErrorStatus'"
DEFVAL { 0 } -- no reconfiguration error
::= { xcmGenReconfEntry 5 }
xcmGenReconfErrorStatus OBJECT-TYPE
SYNTAX XcmGenSNMPv2ErrorStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The reconfiguration error status corresponding to the first
pending reconfiguration option (in 'xcmGenOptionTable') which
was found to be 'in error' (during 'validate' or 'activate'
reconfiguration processing for this host system), or 'noError'
if no error was found (eg, consistency, range, etc)."
REFERENCE "
See: 'xcmGenReconfErrorIndex'"
-- DEFVAL { noError } - no reconfiguration error
::= { xcmGenReconfEntry 6 }
--
-- General Option Group (Cond Mandatory)
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for systems which support tree structured
-- atomic reconfiguration, and optional for all other systems.
--
-- Implementation of this group is conditionally mandatory,
-- however it SHALL be implemented by systems which
-- implement the 'xcmGenReconfGroup'.
--
-- Usage: Systems which implement the 'xcmGenReconfGroup'
-- and 'xcmGenOptionGroup' SHALL also implement
-- the 'xcmGenLockGroup' (for advisory contention locks).
xcmGenOption OBJECT IDENTIFIER ::= { xcmGeneralMIB 10 }
--
-- General Option Simple Objects
--
xcmGenOptionSimple OBJECT-IDENTITY
STATUS current -- restricted use for operations
DESCRIPTION "
This subtree is current. Subordinate objects are leaf objects."
::= { xcmGenOption 1 }
--
-- General Option Operations
--
-- Insert: All 'family' options SHALL be 'added'
-- to current single- or multi-valued options
--
-- Delete: All 'family' options SHALL be 'removed'
-- from current single- or multi-valued options
--
-- Replace: All 'family' options SHALL 'replace'
-- any current single- or multi-valued options
--
-- Note: The 'replace' operation is the DEFAULT and need
-- NOT be specified - it is defined for clarity
xcmGenOptionOperation
OBJECT IDENTIFIER ::= { xcmGenOptionSimple 1 }
-- integerTruthValue (SHALL be 'true')
xcmGenOptionOperationInsert
OBJECT IDENTIFIER ::= { xcmGenOptionOperation 1 }
-- integerTruthValue (SHALL be 'true')
xcmGenOptionOperationDelete
OBJECT IDENTIFIER ::= { xcmGenOptionOperation 2 }
-- integerTruthValue (SHALL be 'true')
xcmGenOptionOperationReplace
OBJECT IDENTIFIER ::= { xcmGenOptionOperation 3 }
-- integerTruthValue (SHALL be 'true')
xcmGenOptionEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of entries (rows) which are currently in the 'active'
state in 'xcmGenOptionTable'."
::= { xcmGenOptionSimple 2 }
xcmGenOptionSupportMaxCount OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum number of simultaneous entries (rows) supported
for the 'xcmGenOptionTable'.
Usage: The value zero ('0') represents 'no limit'."
DEFVAL { 0 } -- no limit on support max count
::= { xcmGenOptionSimple 3 }
--
-- General Option Table Objects
--
xcmGenOptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table containing information on reconfiguration options,
for use in atomic reconfiguration of this host system.
Usage: A conforming management station (or management agent)
SHALL lock 'xcmGenReconfTable' and 'xcmGenOptionTable'
before attempting to perform any 'reconfiguration request' on a
host system (via the 'xcmGenLockTable').
Note: The 'xcmGenOptionTable' is indexed by 'hrDeviceIndex',
so the 'hrDeviceIndex' element of a columnar object instance ID
(ie, fully specified object identifier) NEED NOT be specified in
'xcmGenOptionTypeOID'. To reconfigure objects indexed by
several devices in 'hrDeviceTable' of the IETF Host Resources
MIB (RFC 2790), a conforming management station SHALL use
several rows in 'xcmGenReconfTable' and several trees of objects
in 'xcmGenOptionTable' with appropriate 'hrDeviceIndex' values.
To reconfigure objects which are actually NOT indexed by
'hrDeviceIndex', it is RECOMMENDED that rows be used in
'xcmGenOptionTable' which are indexed by 'hrDeviceIndex' for an
'hrDeviceType' of 'hrDeviceUnknown'."
::= { xcmGenOption 2 }
xcmGenOptionEntry OBJECT-TYPE
SYNTAX XcmGenOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry containing information on a reconfiguration option,
for use in atomic reconfiguration of this host system."
INDEX { hrDeviceIndex,
xcmGenOptionIndex }
::= { xcmGenOptionTable 1 }
XcmGenOptionEntry ::= SEQUENCE {
-- General Option Info
xcmGenOptionIndex Ordinal32,
xcmGenOptionRowStatus RowStatus,
xcmGenOptionTypeOID OBJECT IDENTIFIER,
xcmGenOptionValueSyntax XcmGenOptionValueSyntax,
xcmGenOptionValueInteger Integer32,
xcmGenOptionValueOID OBJECT IDENTIFIER,
xcmGenOptionValueString OCTET STRING,
xcmGenOptionValueLocalization Cardinal32,
xcmGenOptionValueCodedCharSet IANACharset,
-- General Option Common Cross References
xcmGenOptionNextIndex Cardinal32,
xcmGenOptionPreviousIndex Cardinal32,
xcmGenOptionFamilyIndex Cardinal32
}
--
-- General Option Info
--
xcmGenOptionIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by this host system to identify this
conceptual row in the 'xcmGenOptionTable'."
::= { xcmGenOptionEntry 1 }
xcmGenOptionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenOptionTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenOptionRowStatus' row status object; and
SHALL clear the 'xcmGenOptionGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenOptionRowStatus' row status object; and
SHALL set the 'xcmGenOptionGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming management agents SHALL support
'active(1)' and SHOULD support 'notInService(2)' or 'destroy(6)'
(to 'release' the 'reconfiguration option').
Usage: Conforming management agents NEED NOT support
'createAndGo(4)', and SHOULD NOT support 'notReady(3)' or
'createAndWait(5)'.
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'xcmGenOptionSupportMaxCount' (limit object).
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenOptionEntry 2 }
xcmGenOptionTypeOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
An unambiguous reconfiguration option type,
used by system administrators and end users to identify
this reconfiguration option.
Usage: Since this reconfiguration option type is specified
as an object identifier, it MAY be taken from any IETF, Xerox,
third- party, or product-specific MIB, or it MAY simply be any
IETF SMIv2-style 'autonomous type'."
DEFVAL { zeroDotZero } -- no option type
::= { xcmGenOptionEntry 3 }
xcmGenOptionValueSyntax OBJECT-TYPE
SYNTAX XcmGenOptionValueSyntax
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
A reconfiguration option value syntax,
used by system administrators and end users to specify
the correct value syntax for this reconfiguration option.
Usage: This reconfiguration option value syntax is used to
select which of the following three objects SHALL be used to
contain the value of this reconfiguration option."
DEFVAL { unknown } -- unknown option value syntax
::= { xcmGenOptionEntry 4 }
xcmGenOptionValueInteger OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
A reconfiguration option value integer,
used by system administrators and end users to specify
the current value for a reconfiguration option
with a base value syntax of 'INTEGER'.
Note: This object has the type 'Integer32', rather than
'INTEGER'. This a work-around to compiler warnings which occur
when 'INTEGER' is used without a range specification. And if
we had range qualified, it would have been identical to the
SNMP 'Integer32' type. In SNMPv2, only the 'Counter64 is an
integer type wider 32 bits, and for backward compatibility we
depricated the use of Counter64."
REFERENCE "
See: 'xcmGenOptionValueSyntax' and 'xcmGenOptionTypeOID'"
DEFVAL { 0 } -- no option value integer
::= { xcmGenOptionEntry 5 }
xcmGenOptionValueOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
A reconfiguration option value OID (object identifier),
used by system administrators and end users to specify
the current value for a reconfiguration option
with a base value syntax of 'OBJECT IDENTIFIER'."
REFERENCE "
See: 'xcmGenOptionValueSyntax' and 'xcmGenOptionTypeOID'"
DEFVAL { zeroDotZero } -- no option value OID
::= { xcmGenOptionEntry 6 }
xcmGenOptionValueString OBJECT-TYPE
-- SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255))
-- (if 'xcmGenOptionValueLocalization' is zero)
-- SYNTAX XcmNamedLocaleUtf8String (SIZE (0..255))
-- (if 'xcmGenOptionValueLocalization' is non-zero)
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reconfiguration option value string,
used by system administrators and end users to specify
the current value for a reconfiguration option
with a base value syntax of 'OCTET STRING'.
Usage: This object is of type 'XcmFixedLocaleDisplayString'
(if 'xcmGenOptionValueLocalization' is zero)
or 'XcmNamedLocaleUtf8String'
(if 'xcmGenOptionValueLocalization' is non-zero)."
REFERENCE
"See: 'xcmGenOptionValueSyntax' and 'xcmGenOptionTypeOID'
See: 'xcmGenFixedLocalizationIndex' in XCMI General MIB."
DEFVAL { ''H } -- no option value string
::= { xcmGenOptionEntry 7 }
xcmGenOptionValueLocalization OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reconfiguration option value localization,
used by system administrators and end users to specify
the ALTERNATE localization for a reconfiguration option
(different from 'xcmGenFixedLocalizationIndex'), so that
'xcmGenOptionValueString' becomes 'XcmNamedLocaleUtf8String'.
Usage: For a reconfiguration option string to which POSIX-style
localization (territory, language, character set) is applicable
(non-keyword) this object MAY contain a suitable index value for
'xcmGenLocalizationIndex' from the XCMI General MIB, or zero to
indicate 'none'."
REFERENCE
"See: 'xcmGenOptionValueSyntax' and 'xcmGenOptionTypeOID'.
See: 'xcmGenFixedLocalizationIndex' in XCMI General MIB."
DEFVAL { 0 } -- no option value localization
::= { xcmGenOptionEntry 8 }
xcmGenOptionValueCodedCharSet OBJECT-TYPE
SYNTAX IANACharset
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reconfiguration option value character set,
used by system administrators and end users to specify
the ALTERNATE character set for a reconfiguration option
(different from 'xcmGenFixedLocalizationIndex'), so that
'xcmGenOptionValueString' is unambiguous.
Usage: XCMI conforming management agents SHALL ONLY allow
Sets of this object to 'other' (none) or 'utf-8' (Unicode/
ISO-10646 in the UTF-8 encoding, a proper superset of US-ASCII),
for consistency with the Xerox Unicode Coherence Standard."
REFERENCE
"See: 'xcmGenOptionValueSyntax' and 'xcmGenOptionTypeOID'.
See: 'IANACharset' in IETF Printer MIB (RFC 1759).
See: 'xcmGenCodedCharSetTable' in XCMI General MIB."
DEFVAL { other } -- no option value character set
::= { xcmGenOptionEntry 9 }
--
-- General Option Common Cross References
--
xcmGenOptionNextIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of 'xcmGenOptionIndex' corresponding to the next
'chained' conceptual row in the 'xcmGenOptionTable', or zero
if this is the last associated conceptual row in a particular
vertical 'chain' within a given set.
Usage: Generally, reconfiguration options (of similar or unlike
type) are 'chained' vertically via '...[Next|Previous]Index'.
But, in the case where particular communications options MUST
be 'tightly coupled', they SHOULD be 'shelved' horizontally via
'...[Family|Previous]Index' (eg, an IP address and an IP subnet
mask)."
DEFVAL { 0 } -- no entry
::= { xcmGenOptionEntry 10 }
xcmGenOptionPreviousIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of 'xcmGenOptionIndex' corresponding to a previous
associated conceptual row in the 'xcmGenOptionTable', or zero
if this is the first associated conceptual row in a given set.
Usage: This object provides common 'backward' linkage for BOTH
the 'xcmGenOptionNextIndex' and 'xcmGenOptionFamilyIndex'
linkage objects. A previous conceptual row MAY 'forward'
reference this conceptual row via either '...NextIndex' or
'...FamilyIndex' - ie, a given conceptual row MAY 'forward'
reference EXACTLY zero, one, or two 'later' conceptual rows."
DEFVAL { 0 } -- no entry
::= { xcmGenOptionEntry 11 }
xcmGenOptionFamilyIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The value of 'xcmGenOptionIndex' corresponding to a next
'family' conceptual row in the 'xcmGenOptionTable', or zero
if this conceptual row has no associated 'family' members.
Usage: Generally, reconfiguration options (of similar or unlike
type) are 'chained' vertically via '...[Next|Previous]Index'.
But, in the case where particular reconfiguration options MUST
be 'tightly coupled', they SHOULD be 'shelved' horizontally via
'...FamilyIndex' (eg, an IP address and an IP subnet mask)."
DEFVAL { 0 } -- no entry
::= { xcmGenOptionEntry 12 }
--
-- Client Data Group (Cond Mandatory)
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for systems which support 'client data' for remote
-- management stations, and optional for all other systems.
--
-- Usage: Conforming implementations SHALL preserve active
-- 'client data' objects across management agent power cycles.
--
xcmGenClientData OBJECT IDENTIFIER ::= { xcmGeneralMIB 11 }
--
-- Client Data Simple Objects
--
xcmGenClientDataSimple OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This subtree is current. Subordinate objects are leaf objects."
::= { xcmGenClientData 1 }
xcmGenClientDataEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of entries (rows) which are currently in the 'active'
state in 'xcmGenClientDataTable'."
::= { xcmGenClientDataSimple 1 }
xcmGenClientDataLastIndex OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The last entry index (regardless of its current state) in
the 'xcmGenClientDataTable' of this General MIB,
on this host system.
Usage: This last entry index explicitly bounds the valid range
of 'xcmGenClientDataIndex'."
::= { xcmGenClientDataSimple 2 }
xcmGenClientDataSupportMaxCount OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum number of simultaneous entries (rows) supported
for the 'xcmGenClientDataTable'.
Usage: The value zero ('0') represents 'no limit'."
DEFVAL { 0 } -- no limit on support max count
::= { xcmGenClientDataSimple 3 }
--
-- Client Data Table Objects
--
xcmGenClientDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenClientDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table containing 'client data' objects for use by conforming
management stations/agents, particularly during installation
of this host system.
Usage: For managed systems which support static rows (ie,
'read-write'), a management station (or management agent) SHALL
search 'xcmGenClientDataRowStatus', to determine the
appropriate value of 'xcmGenClientDataIndex' to use when
allocating an existing row in the 'xcmGenClientDataTable'.
Usage: For managed systems which support dynamic rows (ie,
'read-create'), a management station (or management agent) SHALL
examine 'xcmGenClientDataLastIndex', to determine the
appropriate value of 'xcmGenClientDataIndex' to use when
creating a new row in the 'xcmGenClientDataTable'.
Usage: Throughout this specification, the term 'stable storage'
refers to storage which is reliable over long durations (years)
and is NOT destroyed by host system reboot (eg, battery-backed
DRAM is 'stable storage' - while simple DRAM is NOT 'stable
storage'). Examples of valid 'stable storage' include: NVRAM,
hard disk, EEPROM, etc.
Usage: Conforming implementations SHALL preserve active
'client data' objects across management agent power cycles,
and SHALL implement one of the following two methods:
1) The agent SHALL store 'client data' objects directly in
'stable storage'; or
2) The agent SHALL automatically checkpoint all active 'client
data' objects to 'stable storage' with reasonable frequency
(either due to a write to some 'client data' object, or upon
expiration of a product-specific timeout).
Usage: Conforming implementations MAY (optionally) support
one of the following two 'checkpoint protocols':
1) A client sends a 'Set' of 'xcmGenClientDataRowStatus' to
'active(1)', to request that a 'checkpoint' be performed;
2a) An agent which supports 'rapid checkpoint',
completes the checkpoint to 'stable storage', and
sends a 'SetResponse' with 'noError(0)';
<or>
2b) An agent which supports 'delayed checkpoint',
changes 'xcmGenClientDataRowStatus' to 'notInService(2)',
sends a 'SetResponse' with 'noError(0)',
completes the checkpoint to 'stable storage', and later
changes 'xcmGenClientDataRowStatus' back to 'active(1)'."
::= { xcmGenClientData 2 }
xcmGenClientDataEntry OBJECT-TYPE
SYNTAX XcmGenClientDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry containing 'client data' objects for use by conforming
management stations/agents, particularly during installation
of this host system."
INDEX { xcmGenClientDataIndex }
::= { xcmGenClientDataTable 1 }
XcmGenClientDataEntry ::= SEQUENCE {
-- General Client Data Info
xcmGenClientDataIndex Ordinal32,
xcmGenClientDataRowStatus RowStatus,
xcmGenClientDataRequestDate DateAndTime,
xcmGenClientDataRequestID XcmGlobalUniqueID,
xcmGenClientDataProductID ProductID,
xcmGenClientDataLength Cardinal32,
xcmGenClientDataString OCTET STRING
}
--
-- General Client Data Info
--
xcmGenClientDataIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by this host system to identify this
conceptual row in the 'xcmGenClientDataTable'.
Usage: Conforming implementations which only support a single,
statically allocated row, SHALL allocate that row with an
'xcmGenClientDataIndex' value of one (1)."
::= { xcmGenClientDataEntry 1 }
xcmGenClientDataRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenClientDataTable'.
Usage: Conforming implementations which support static rows
SHALL support 'active' and 'notInService' writes to this
'xcmGenClientDataRowStatus' row status object; and
SHALL clear the 'xcmGenClientDataGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenClientDataRowStatus' row status object; and
SHALL set the 'xcmGenClientDataGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming implementations NEED NOT support dynamic row
creation (via 'createAndGo(4)') nor dynamic row deletion (via
'destroy(6)').
Usage: Conforming implementations MAY support a single, static
conceptual row, but SHALL allocate that row with an
'xcmGenClientDataIndex' value of one ('1').
Usage: Conforming management stations, when they first create
or activate rows in this table, SHALL set
'xcmGenClientDataRowStatus' to 'active(1)' (for static rows) or
'createAndGo(4)' (for dynamic rows),
'xcmGenClientDataRequestID' (to a suitable client global ID),
'xcmGenClientDataProductID' (to a suitable client product ID),
'xcmGenClientDataLength' (to a suitable client data length)
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenClientDataRequestID',
'xcmGenClientDataProductID', or
'xcmGenClientDataLength'
AFTER row creation (these objects are 'write-once').
Usage: To explicitly release this conceptual row, the client
data owner SHALL set 'xcmGenClientDataRowStatus' to
'notInService(2)' (for static rows) or 'destroy(6)' (for dynamic
rows).
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'xcmGenClientDataSupportMaxCount' (limit object).
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenClientDataEntry 2 }
xcmGenClientDataRequestDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The client data request date which uniquely timestamps the
creation of this conceptual row in the 'xcmGenClientDataTable'.
Usage: This request date SHALL be set (to a suitable
value) by conforming management agents during creation of each
conceptual row in the 'xcmGenClientDataTable'.
Usage: Conforming implementations which have a source of time,
SHALL set a meaningful value in this object. ONLY those
implementations which do NOT have a source of time, SHALL return
the following DEFVAL."
REFERENCE "
See: 'xcmGenClientDataRowStatus'"
DEFVAL { '0000000000000000'H } -- no client data request date
::= { xcmGenClientDataEntry 3 }
xcmGenClientDataRequestID OBJECT-TYPE
SYNTAX XcmGlobalUniqueID
MAX-ACCESS read-create -- 'write-once' (see below)
STATUS current
DESCRIPTION "
The client data owner request ID which uniquely identifies the
creation of this conceptual row in the 'xcmGenClientDataTable'.
Usage: Conforming management stations, when they first create
or activate rows in this table, SHALL set
'xcmGenClientDataRowStatus' to 'active(1)' (for static rows) or
'createAndGo(4)' (for dynamic rows),
'xcmGenClientDataRequestID' (to a suitable client global ID),
'xcmGenClientDataProductID' (to a suitable client product ID),
'xcmGenClientDataLength' (to a suitable client data length)
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenClientDataRequestID',
'xcmGenClientDataProductID', or
'xcmGenClientDataLength'
AFTER row creation (these objects are 'write-once')."
REFERENCE "
See: 'xcmGenClientDataRowStatus'"
DEFVAL { ''H } -- no client data request ID
::= { xcmGenClientDataEntry 4 }
xcmGenClientDataProductID OBJECT-TYPE
SYNTAX ProductID
MAX-ACCESS read-create -- 'write-once' (see below)
STATUS current
DESCRIPTION "
The client data owner product ID corresponding to the current
'owner' of this client data.
Usage: Conforming management stations, when they first create
or activate rows in this table, SHALL set
'xcmGenClientDataRowStatus' to 'active(1)' (for static rows) or
'createAndGo(4)' (for dynamic rows),
'xcmGenClientDataRequestID' (to a suitable client global ID),
'xcmGenClientDataProductID' (to a suitable client product ID),
'xcmGenClientDataLength' (to a suitable client data length)
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenClientDataRequestID',
'xcmGenClientDataProductID', or
'xcmGenClientDataLength'
AFTER row creation (these objects are 'write-once')."
REFERENCE "
See: 'xcmGenClientDataRowStatus'
See: 'ProductID' in IETF Host Resources MIB (RFC 2790)."
DEFVAL { zeroDotZero } -- no client data product ID
::= { xcmGenClientDataEntry 5 }
xcmGenClientDataLength OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create -- 'write-once' (see below)
STATUS current
DESCRIPTION "
The client data length requested/granted for this
conceptual row in the 'xcmGenClientDataTable'.
Usage: Conforming implementations NEED NOT support maximum
client data length greater than 1 octet.
Usage: Conforming management stations, when they first create
or activate rows in this table, SHALL set
'xcmGenClientDataRowStatus' to 'active(1)' (for static rows) or
'createAndGo(4)' (for dynamic rows),
'xcmGenClientDataRequestID' (to a suitable client global ID),
'xcmGenClientDataProductID' (to a suitable client product ID),
'xcmGenClientDataLength' (to a suitable client data length)
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenClientDataRequestID',
'xcmGenClientDataProductID', or
'xcmGenClientDataLength'
AFTER row creation (these objects are 'write-once')."
REFERENCE "
See: 'xcmGenClientDataRowStatus'"
DEFVAL { 0 } -- no client data length
::= { xcmGenClientDataEntry 6 }
xcmGenClientDataString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The client data string currently set into this conceptual
row in the 'xcmGenClientDataTable'.
Usage: Conforming implementations NEED NOT support maximum
client data length greater than 1 octet.
Usage: This data string NEED NOT be set (to a suitable
value) by the client data owner, in the same PDU which creates
each conceptual row in the 'xcmGenClientDataTable'."
REFERENCE "
See: 'xcmGenClientDataRowStatus'"
DEFVAL { ''H } -- no client data string
::= { xcmGenClientDataEntry 7 }
-- Reserved (deleted arc) OBJECT IDENTIFIER ::= { xcmGeneralMIB 12 }
--
-- Trap Client Group (Mandatory)
--
-- Implementation of this group is mandatory for all systems.
--
-- Note: Systems implementing the Trap Client group
-- SHALL implement the Trap View group.
xcmGenTrapClient OBJECT IDENTIFIER ::= { xcmGeneralMIB 13 }
--
-- Trap Client Simple Objects
--
xcmGenTrapClientSimple OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This subtree is current. Subordinate objects are leaf objects."
::= { xcmGenTrapClient 1 }
xcmGenTrapClientEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of entries (rows) which are currently in the 'active'
state in 'xcmGenTrapClientTable'."
::= { xcmGenTrapClientSimple 1 }
xcmGenTrapClientSupportMaxCount OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum number of simultaneous entries (rows) supported
for the 'xcmGenTrapClientTable'.
Usage: The value zero ('0') represents 'no limit'."
DEFVAL { 0 } -- no limit on support max count
::= { xcmGenTrapClientSimple 2 }
--
-- Trap Client Table Objects
--
xcmGenTrapClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenTrapClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of SNMP trap clients (management stations or proxies)
registered for trap delivery from this host system.
Usage: SNMP version/transport independent trap registration.
Usage: Conforming management stations SHALL create at
least one subordinate row in the 'xcmGenTrapViewTable' for each
trap client that they register in the 'xcmGenTrapClientTable'.
Conforming management agents SHOULD interpret a dangling row in
the 'xcmGenTrapClientTable' (no children) as 'NO traps in view'
(existing implementations of both clients and devices are known
to consider dangling rows invalid). To register for all device
traps, use a single view of 'iso(1).org(3).dod(6).internet(1)'.
Usage: Conforming management agents SHALL delete any
rows in the 'xcmGenTrapViewTable' which were subordinate to a
deleted row in the 'xcmGenTrapClientTable'."
REFERENCE "
See: Party group in Historic SNMPv2 Party MIB (RFC 1447)."
::= { xcmGenTrapClient 2 }
xcmGenTrapClientEntry OBJECT-TYPE
SYNTAX XcmGenTrapClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry for an SNMP trap client (management station or proxy)
registered for trap delivery from this host system."
INDEX { xcmGenTrapClientSNMPDomain,
xcmGenTrapClientSNMPAddress }
::= { xcmGenTrapClientTable 1 }
XcmGenTrapClientEntry ::= SEQUENCE {
-- Trap Client Info
xcmGenTrapClientSNMPDomain XcmGenSNMPDomain,
xcmGenTrapClientSNMPAddress OCTET STRING,
xcmGenTrapClientRowStatus RowStatus,
xcmGenTrapClientIndex Ordinal32,
xcmGenTrapClientRowPersistence XcmGenRowPersistence,
xcmGenTrapClientSNMPVersion XcmGenSNMPVersion,
-- Trap Client Community Info
xcmGenTrapClientSNMPCommunity OCTET STRING
}
xcmGenTrapClientSNMPDomain OBJECT-TYPE
SYNTAX XcmGenSNMPDomain
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This object is used to specify the transport domain (address
and name space) which SHALL be used by this management agent
for SNMP protocol traffic (transmission of SNMP traps),
in the version specified by 'xcmGenTrapClientSNMPVersion',
to the trap client (management station or proxy).
This object is also used to allow the 'xcmGenTrapClientTable' to
be used with any URI scheme (e.g., 'mailto:') for notifications,
by specifying 'uriNotifyDomain'."
REFERENCE "
See: 'xcmGenBaseSNMP[Domain|Version]Support'.
See: 'XcmGenSNMPDomain' textual convention in the
XCMI General TC.
See: 'snmp...Domain' object identifiers in the
IETF SNMPv2 Transport Mappings (RFC 1449/1906)."
::= { xcmGenTrapClientEntry 1 }
xcmGenTrapClientSNMPAddress OBJECT-TYPE
-- SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255))
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This object is used to specify the transport address (below
SNMP) which SHALL be used by this management agent to deliver
SNMP traps to the trap client (management station or proxy).
Usage: This transport address usually consists of an underlying
network layer address with a suffixed transport selector.
Usage: This object is of type 'XcmFixedLocaleDisplayString'."
REFERENCE "
See: 'xcmGenBaseSNMP[Domain|Version]Support'.
See: 'SnmpUDPAddress' (IP addr, UDP port - Internet),
'SNMPOSIAddress' (len, NSAP addr, TSelector - OSI),
'SNMPNBPAddress' (object, type, zone - AppleTalk), and
'SNMPIPXAddress' (net no, MAC addr, socket - NetWare)
textual conventions in the
IETF SNMPv2 Transport Mappings (RFC 1449/1906).
See: 'XcmSNMPNetbiosAddress' (MAC addr, port - NetBIOS)
textual conventions in the
XCMI Comms Config TC.
See: 'XcmSnmpIPHostnameAddress' textual convention in the
XCMI Comms Config TC."
::= { xcmGenTrapClientEntry 2 }
xcmGenTrapClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenTrapClientTable'.
Usage: It is conformant to implement this object as read-only,
however, conforming management agents are STRONGLY RECOMMENDED
to support at least read-write access to this object.
Usage: Conforming management stations, when they first create
new rows in this table, SHALL set
'xcmGenTrapClientRowStatus' (to 'createAndGo'),
'xcmGenTrapClientRowPersistence' (if not 'volatile'),
'xcmGenTrapClientSNMPVersion' (if not 'snmpV1Community'), and
'xcmGenTrapClientSNMPCommunity' (if not the current managed
system default in 'xcmGenBaseSNMPTrapCommunity')
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenTrapClientRowPersistence',
'xcmGenTrapClientSNMPVersion', or
'xcmGenTrapClientSNMPCommunity'
AFTER row creation (these objects are 'write-once').
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenTrapClientRowStatus' row status object; and
SHALL set the 'xcmGenTrapClientGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming management agents SHOULD NOT support
'notInService(2)', 'notReady(3)', or 'createAndWait(5)'.
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'xcmGenTrapClientSupportMaxCount' (limit object).
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenTrapClientEntry 3 }
xcmGenTrapClientIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
A unique value ASSIGNED by this host system to identify this
conceptual row in the 'xcmGenTrapClientTable'.
This object is used to specify the unique client index which was
chosen FOR the trap client registered in this conceptual row
(management station or proxy) at row creation and which SHALL be
used by the trap client to create any associated conceptual
rows in the 'xcmGenTrapViewTable'.
Usage: Conforming management agents NEED NOT preserve the
value of this object across power cycles for 'nonvolatile' rows
in the 'xcmGenTrapClientTable', but SHALL preserve the
configured associations with (any) subordinate rows in the
'xcmGenTrapViewTable'."
::= { xcmGenTrapClientEntry 4 }
xcmGenTrapClientRowPersistence OBJECT-TYPE
SYNTAX XcmGenRowPersistence
MAX-ACCESS read-create -- 'write-once' (see below)
STATUS current
DESCRIPTION "
This object is used to specify the persistence of this
conceptual row in the 'xcmGenTrapClientTable' (and associated
conceptual rows in the 'xcmGenTrapViewTable').
Usage: It is conformant to implement this object as read-only,
however, conforming management agents are STRONGLY RECOMMENDED
to support at least read-write access to this object.
Usage: Conforming management stations, when they first create
new rows in this table, SHALL set
'xcmGenTrapClientRowStatus' (to 'createAndGo'),
'xcmGenTrapClientRowPersistence' (if not 'volatile'),
'xcmGenTrapClientSNMPVersion' (if not 'snmpV1Community'), and
'xcmGenTrapClientSNMPCommunity' (if not the current managed
system default in 'xcmGenBaseSNMPTrapCommunity')
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenTrapClientRowPersistence',
'xcmGenTrapClientSNMPVersion', or
'xcmGenTrapClientSNMPCommunity'
AFTER row creation (these objects are 'write-once').
Usage: Dynamically created rows SHALL be given 'volatile'
or 'nonvolatile' persistence.
Usage: Conforming management agents SHALL support
'volatile' (lost across power cycles).
Usage: Conforming management agents are STRONGLY RECOMMENDED to
support 'nonvolatile' (preserved across power cycles),
but NEED NOT support any other levels of persistence."
DEFVAL { volatile } -- lost across power cycles
::= { xcmGenTrapClientEntry 5 }
xcmGenTrapClientSNMPVersion OBJECT-TYPE
SYNTAX XcmGenSNMPVersion
MAX-ACCESS read-create -- 'write-once' (see below)
STATUS current
DESCRIPTION "
This object is used to specify the SNMP version (RFC 1157, RFC
1905, etc) which SHALL be used by this management agent
for SNMP protocol traffic (transmission of SNMP traps),
in the domain specified by 'xcmGenTrapClientSNMPDomain',
to the trap client (management station or proxy).
Usage: Conforming management stations, when they first create
new rows in this table, SHALL set
'xcmGenTrapClientRowStatus' (to 'createAndGo'),
'xcmGenTrapClientRowPersistence' (if not 'volatile'),
'xcmGenTrapClientSNMPVersion' (if not 'snmpV1Community'), and
'xcmGenTrapClientSNMPCommunity' (if not the current managed
system default in 'xcmGenBaseSNMPTrapCommunity')
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenTrapClientRowPersistence',
'xcmGenTrapClientSNMPVersion', or
'xcmGenTrapClientSNMPCommunity'
AFTER row creation (these objects are 'write-once')."
REFERENCE "
See: 'xcmGenBaseSNMP[Domain|Version]Support'."
DEFVAL { snmpV1Community } -- SNMPv1 Standard (RFC 1157)
::= { xcmGenTrapClientEntry 6 }
xcmGenTrapClientSNMPCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create -- 'write-once' (see below)
STATUS current
DESCRIPTION "
This object is used to specify the 'trap community name' used
in all SNMPv1c and SNMPv2c 'Inform|Trap' PDUs
which SHALL be generated by this SNMP management agent,
in the domain specified by 'xcmGenTrapClientSNMPDomain',
to the trap client (management station or proxy).
Note: XCMI-defined community name objects support 64 octets
maximum length and configurable charsets, for consistency with
the 'snmpCommunityName' object defined in the SNMP Community MIB
defined in RFC 2576 (March 2000).
Note: Products MAY ship with a market-specific factory default
locale with a charset other than 'utf-8', eg, in Japan a product
might factory default to 'shift-jis(17)' or 'iso-2022-jp(39)'.
Such products MUST implement the 'xcmGenFixedLocalizationTable',
to prevent ambiguity about the factory default charset.
Usage: For best interworking with the ('utf-8' charset ONLY)
closely related 'snmpCommunitySecurityName' object in RFC 2576,
conforming management stations and management agents SHOULD NOT
configure community names longer than 32 octets.
Usage: For best interworking with third-party applications,
conforming management stations and management agents SHOULD NOT
configure empty (zero-length or all spaces) community names.
Usage: Conforming management stations, when they first create
new rows in this table, SHALL set
'xcmGenTrapClientRowStatus' (to 'createAndGo'),
'xcmGenTrapClientRowPersistence' (if not 'volatile'),
'xcmGenTrapClientSNMPVersion' (if not 'snmpV1Community'), and
'xcmGenTrapClientSNMPCommunity' (if not the current managed
system default in 'xcmGenBaseSNMPTrapCommunity')
SIMULTANEOUSLY (in the same SNMP Set-Request PDU).
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenTrapClientRowPersistence',
'xcmGenTrapClientSNMPVersion', or
'xcmGenTrapClientSNMPCommunity'
AFTER row creation (these objects are 'write-once').
Usage: This object SHALL be set by all XCMI conforming
SNMP trap generators (managed host systems) to the default value
of 'xcmGenBaseSNMPTrapCommunity', when NOT supplied by the
requesting SNMP trap client (management station or proxy) at
the time of row creation.
Usage: This object is of type 'XcmFixedLocaleDisplayString'
(see DESCRIPTION of 'xcmGenBaseSNMPReadCommunity' above).
If 'xcmGenLocalizationTable' or 'xcmGenFixedLocalizationTable'
are not implemented on this host system, then the charset SHALL
be 'utf-8(106)', ISO 10646-1 in 'UTF-8' stream encoding.
Usage: All XCMI conforming management agents SHALL allow
any defined character in the configured charset of this object.
All XCMI conforming management stations SHOULD NOT write control
characters or other non-display characters into this object.
WARNING: Changing the configured 'trap community name' of an
SNMP trap client registration will cause a COMPLETE loss of
communications unless the associated SNMP management station
(client) ALSO changes over to the new 'trap community name'!!!"
REFERENCE "
See: SNMPv1c (RFC 1157) and SNMPv2c (RFC 1905).
See: 'Coexistence between SNMPv1, SNMPv2, and SNMPv3'
RFC 2576, March 2000.
See: 'xcmGenBaseSNMPTrapCommunity'."
-- DEFVAL intentionally omitted - managers or agents SHALL initialize
::= { xcmGenTrapClientEntry 7 }
--
-- Trap View Group (Mandatory)
--
-- Implementation of this group is mandatory for all systems.
--
-- Note: Systems implementing the Trap View group
-- SHALL implement the Trap Client group.
xcmGenTrapView OBJECT IDENTIFIER ::= { xcmGeneralMIB 14 }
--
-- Trap View Simple Objects
--
xcmGenTrapViewSimple OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This subtree is current. Subordinate objects are leaf objects."
::= { xcmGenTrapView 1 }
xcmGenTrapViewEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of entries (rows) which are currently in the 'active'
state in 'xcmGenTrapViewTable'."
::= { xcmGenTrapViewSimple 1 }
xcmGenTrapViewSupportMaxCount OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum number of simultaneous entries (rows) supported
for the 'xcmGenTrapViewTable'.
Usage: The value zero ('0') represents 'no limit'."
DEFVAL { 0 } -- no limit on support max count
::= { xcmGenTrapViewSimple 2 }
--
-- Trap View Table Objects
--
xcmGenTrapViewTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenTrapViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of SNMP trap object subtrees (ie, trap scopes)
registered for trap delivery from this host system to the
associated trap client (management station or proxy).
Usage: SNMP version/transport independent trap registration.
Usage: Conforming management stations SHALL create at
least one subordinate row in the 'xcmGenTrapViewTable' for each
trap client that they register in the 'xcmGenTrapClientTable'.
Conforming management agents SHOULD interpret a dangling row in
the 'xcmGenTrapClientTable' (no children) as 'NO traps in view'
(existing implementations of both clients and devices are known
to consider dangling rows invalid). To register for all device
traps, use a single view of 'iso(1).org(3).dod(6).internet(1)'.
Usage: Conforming management agents SHALL delete any
rows in the 'xcmGenTrapViewTable' which were subordinate to a
deleted row in the 'xcmGenTrapClientTable'."
REFERENCE "
See: View group in Historic SNMPv2 Party MIB (RFC 1447)."
::= { xcmGenTrapView 2 }
xcmGenTrapViewEntry OBJECT-TYPE
SYNTAX XcmGenTrapViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry for an SNMP trap object subtree (ie, trap scope)
registered for trap delivery from this host system to the
associated trap client (management station or proxy)."
INDEX { xcmGenTrapClientIndex,
xcmGenTrapViewObjectSubtree }
::= { xcmGenTrapViewTable 1 }
XcmGenTrapViewEntry ::= SEQUENCE {
-- Trap View (Scope) Info
xcmGenTrapViewObjectSubtree OBJECT IDENTIFIER,
xcmGenTrapViewRowStatus RowStatus,
xcmGenTrapViewNotifySeverity XcmGenNotifySeverityFilter,
xcmGenTrapViewNotifyTraining XcmGenNotifyTrainingFilter
}
xcmGenTrapViewObjectSubtree OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This object is used to specify the object subtree (within MIBs)
which is 'in scope' for this trap view."
::= { xcmGenTrapViewEntry 1 }
xcmGenTrapViewRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object manages the row status of this conceptual row in
the 'xcmGenTrapViewTable'.
Usage: Conforming implementations which support dynamic rows
SHALL support 'createAndGo' and 'destroy' writes to this
'xcmGenTrapViewRowStatus' row status object; and
SHALL set the 'xcmGenTrapViewGroup' bit in
'xcmGenBaseGroupCreateSupport' in the 'xcmGenBaseTable'.
Usage: Conforming management agents SHOULD NOT support
'notInService(2)', 'notReady(3)', or 'createAndWait(5)'.
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: 'xcmGenBaseGroupCreateSupport' in 'xcmGenBaseTable'.
See: 'xcmGenTrapViewSupportMaxCount' (limit object).
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenTrapViewEntry 2 }
xcmGenTrapViewNotifySeverity OBJECT-TYPE
SYNTAX XcmGenNotifySeverityFilter
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify the notification severity filter
used to 'screen' notifications 'in scope' for this trap view.
Usage: Individual trap definitions MAY further constrain which
notifications are 'in scope'."
REFERENCE "
See: 'prtAlertSeverityLevel' in IETF Printer MIB (RFC 1759).
See: 'XcmGenNotifySeverityFilter' in XCMI General TC.
See: 'xcmGenBaseNotifySeveritySupport'."
DEFVAL { 15 } -- report, warning, error
::= { xcmGenTrapViewEntry 3 }
xcmGenTrapViewNotifyTraining OBJECT-TYPE
SYNTAX XcmGenNotifyTrainingFilter
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify the notification training filter
used to 'screen' notifications 'in scope' for this trap view.
Usage: Individual trap definitions MAY further constrain which
notifications are 'in scope'."
REFERENCE "
See: 'prtAlertTrainingLevel' in IETF Printer MIB (RFC 1759).
See: 'XcmGenNotifyTrainingFilter' in XCMI General TC.
See: 'xcmGenBaseNotifyTrainingSupport'."
DEFVAL { 60 } -- none, trained, service, mgmt
::= { xcmGenTrapViewEntry 4 }
-- Message Map Group (Cond Mandatory)
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for systems which implement message label lookups
-- of agent-supplied strings and optional for all other systems.
xcmGenMessageMap OBJECT IDENTIFIER ::= { xcmGeneralMIB 15 }
xcmGenMessageMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenMessageMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of message string labels for the current contents
of static (agent-generated) message string objects, in all
MIBs implemented by this host system.
Usage: Exposes the server's message catalog for indirect search
via source message object OIDs, yielding message string labels.
Usage: Supports reliable translation by clients (managers) of
static (agent-generated) message strings, INDEPENDENT of the
current language/country/charset of the message strings on the
managed host system in the conventional MIB objects.
Conformance: XCMI conforming management agents SHALL
support SNMP Get requests to the 'xcmGenMessageMapTable'
(ie, agents must respond to valid explicit EXACT requests).
When 'xcmGenMessageMapTable' is currently 'hidden' via
'xcmGenBaseGroupWalkHidden', XCMI conforming management agents
SHALL skip over 'xcmGenMessageMapTable' to the next
lexicographically higher object for GetNext or GetBulk requests
- 'xcmGenMessageMapTable' SHOULD be invisible to MIB walks,
to avoid undesirable performance degradation with third-party
network management stations and other monitoring tools."
REFERENCE "
See: 'XcmGenMessageMapStringLabel' in XCMI General TC."
::= { xcmGenMessageMap 2 }
xcmGenMessageMapEntry OBJECT-TYPE
SYNTAX XcmGenMessageMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A entry for a message string label for the current contents
of a static (agent-generated) message string object, in some
MIB implemented by this host system.
Conformance: XCMI conforming management agents SHALL
support SNMP Get requests to the 'xcmGenMessageMapTable'
(ie, agents must respond to valid explicit EXACT requests).
When 'xcmGenMessageMapTable' is currently 'hidden' via
'xcmGenBaseGroupWalkHidden', XCMI conforming management agents
SHALL skip over 'xcmGenMessageMapTable' to the next
lexicographically higher object for GetNext or GetBulk requests
- 'xcmGenMessageMapTable' SHOULD be invisible to MIB walks,
to avoid undesirable performance degradation with third-party
network management stations and other monitoring tools."
INDEX { xcmGenMessageMapStringIndexOID }
::= { xcmGenMessageMapTable 1 }
XcmGenMessageMapEntry ::= SEQUENCE {
-- Message Map Info
xcmGenMessageMapStringIndexOID OBJECT IDENTIFIER,
xcmGenMessageMapStringLabel XcmGenMessageMapStringLabel
}
xcmGenMessageMapStringIndexOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This object is used to specify the fully qualified object
identifer (w/ instance suffix) of a message string object,
which contains a Xerox registered standard or experimental
message string value associated with the current message string
label specified in 'xcmGenMessageMapStringLabel'."
REFERENCE "
See: 'XcmGenMessageMapStringLabel' in XCMI General TC."
::= { xcmGenMessageMapEntry 1 }
xcmGenMessageMapStringLabel OBJECT-TYPE
SYNTAX XcmGenMessageMapStringLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object is used to specify a Xerox standard or experiemental
message string label associated with the current value of the
message string pointed to by 'xcmGenMessageMapStringIndexOID'.
Usage: Experimental message string labels SHOULD NOT be used in
shipping versions of Xerox-branded products or services. They
exist solely to facilitate rapid product development cycles.
Usage: All Xerox message string label values SHALL
be specified using display (NOT space) characters from the IANA
registered charset 'utf-8' (ie, the UTF-8 octet-stream encoding
of ISO-10646 UCS-4, described in RFC 2279).
Usage: All Xerox message string label values SHALL
contain no more than 64 UTF-8 display characters AND no more
than 128 total octets (in some scripts, less than 64 characters
in UTF-8 octet-stream encoding).
Note: New or refined message label syntaxes MAY be defined in
future versions of the XCMI General TC."
REFERENCE "
See: 'XcmGenMessageMapStringLabel' in XCMI General TC."
-- DEFVAL intentionally omitted - agents SHALL report valid msg labels
::= { xcmGenMessageMapEntry 2 }
-- Message Text Group (Cond Mandatory)
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for systems which implement message translations
-- of agent-supplied strings and optional for all other systems.
xcmGenMessageText OBJECT IDENTIFIER ::= { xcmGeneralMIB 16 }
xcmGenMessageTextTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenMessageTextEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of message string translations for all target locales
of static (agent-generated) message string objects, in various
known (agent-supported) source message locales.
Usage: Exposes the server's message catalog for indirect search
via source message object OIDs, yielding target string values.
Usage: Supports reliable translation by servers (agents) of
static (agent-generated) message strings, INDEPENDENT of the
current language/country/charset of the message strings on the
managed host system in the conventional MIB objects.
Conformance: XCMI conforming management agents SHALL
support SNMP Get requests to the 'xcmGenMessageTextTable'
(ie, agents must respond to valid explicit EXACT requests).
When 'xcmGenMessageTextTable' is currently 'hidden' via
'xcmGenBaseGroupWalkHidden', XCMI conforming management agents
SHALL skip over 'xcmGenMessageTextTable' to the next
lexicographically higher object for GetNext or GetBulk requests
- 'xcmGenMessageTextTable' SHOULD be invisible to MIB walks,
to avoid undesirable performance degradation with third-party
network management stations and other monitoring tools."
REFERENCE "
See: 'xcmGenMessageTextTable'"
::= { xcmGenMessageText 2 }
xcmGenMessageTextEntry OBJECT-TYPE
SYNTAX XcmGenMessageTextEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry for a message string translation for one target locale
of a static (agent-generated) message string object, in some
MIB implemented by this host system.
Conformance: XCMI conforming management agents SHALL
support SNMP Get requests to the 'xcmGenMessageTextTable'
(ie, agents must respond to valid explicit EXACT requests).
When 'xcmGenMessageTextTable' is currently 'hidden' via
'xcmGenBaseGroupWalkHidden', XCMI conforming management agents
SHALL skip over 'xcmGenMessageTextTable' to the next
lexicographically higher object for GetNext or GetBulk requests
- 'xcmGenMessageTextTable' SHOULD be invisible to MIB walks,
to avoid undesirable performance degradation with third-party
network management stations and other monitoring tools."
REFERENCE "
See: 'xcmGenMessageMapTable'"
INDEX { xcmGenMessageTextStringIndexOID,
xcmGenMessageTextTargetLocale }
::= { xcmGenMessageTextTable 1 }
XcmGenMessageTextEntry ::= SEQUENCE {
-- Message Text Info
xcmGenMessageTextStringIndexOID OBJECT IDENTIFIER,
xcmGenMessageTextTargetLocale Ordinal32,
xcmGenMessageTextTargetString XcmNamedLocaleUtf8String
}
xcmGenMessageTextStringIndexOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This object is used to specify the fully qualified object
identifer (w/ instance suffix) of a message string object,
which contains a Xerox registered standard or experimental
message string value equivalent to the target message string
translation specified in 'xcmGenMessageTextTargetString'.
The locale of this source message string is immaterial."
REFERENCE "
See: 'xcmGenMessageTextTargetLocale'
See: 'xcmGenMessageTextTargetString'"
::= { xcmGenMessageTextEntry 1 }
xcmGenMessageTextTargetLocale OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
This object is used to specify the locale (language/country),
as a value of 'xcmGenLocalizationIndex', of the message string
translation in 'xcmGenMessageTextTargetString'."
REFERENCE "
See: 'xcmGenMessageTextStringIndexOID'
See: 'xcmGenMessageTextTargetString'"
::= { xcmGenMessageTextEntry 2 }
xcmGenMessageTextTargetString OBJECT-TYPE
SYNTAX XcmNamedLocaleUtf8String (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object is used to specify a translated Xerox registered
message string value associated with the current value of the
message string pointed to by 'xcmGenMessageMapStringIndexOID',
in the locale specified by 'xcmGenMessageTextTargetLocale'.
Usage: All Xerox registered message string values SHALL
contain no more than 128 UTF-8 display characters AND no more
than 255 total octets (in some scripts, less than 128 characters
in UTF-8 octet-stream encoding)."
REFERENCE "
See: 'xcmGenMessageTextStringIndexOID'
See: 'xcmGenMessageTextTargetLocale'"
-- DEFVAL intentionally omitted - agents SHALL translate messages
::= { xcmGenMessageTextEntry 3 }
--
-- Notify Rule Group (Cond Mandatory)
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for systems which implement event notification via
-- non-SNMP delivery methods and optional for all other systems.
--
-- Note: Systems implementing the Notify Rule group
-- SHALL implement the Notify Detail group.
--
-- Note: The Notify Rule group is functionally equivalent to
-- the Trap Client group for non-SNMP event delivery methods.
xcmGenNotifyRule OBJECT IDENTIFIER ::= { xcmGeneralMIB 17 }
--
-- Notify Simple Objects
--
xcmGenNotifyRuleSimple OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This subtree is current. Subordinate objects are leaf objects."
::= { xcmGenNotifyRule 1 }
xcmGenNotifyRuleEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of entries (rows) which are currently in the 'active'
state in 'xcmGenNotifyRuleTable'."
::= { xcmGenNotifyRuleSimple 1 }
xcmGenNotifyRuleSupportMaxCount OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum number of simultaneous entries (rows) supported
for the 'xcmGenNotifyRuleTable'.
Usage: The value zero ('0') represents 'no limit'."
DEFVAL { 0 } -- no limit on support max count
::= { xcmGenNotifyRuleSimple 2 }
--
-- Notify Table Objects
--
xcmGenNotifyRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenNotifyRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A table of notification rules (recipient/event lists)
registered for event delivery from this host system.
Note: In this MIB, the term 'notification rule' is equivalent
to the term 'Subscription object' in IPP Notifications.
Usage: Conforming management agents SHALL NOT accept sets to
any other columnar object in 'xcmGenNotifyRuleTable' when
'xcmGenNotifyRuleRowStatus' is 'active'.
Dynamic rows must be deleted (with 'destroy') and then recreated
(with 'createAndGo') with new columnar values.
Static rows must be released (with 'notInService') and then
then reallocated (with 'active') with new columnar values.
Thus only a row status transition to 'active' indicates a new
notification registration by a conforming management station.
Usage: Conforming management agents SHALL delete any
rows in the 'xcmGenNotifyDetailTable' which were subordinate to
a deleted row in the 'xcmGenNotifyRuleTable'."
REFERENCE "
See: Section 5 'Subscription Object' and
Section 5.3 'Subscription Template Attributes' and
section 5.4 'Subscription Description Attributes' in
IPP Notify (draft-ietf-ipp-not-spec-06.txt)."
::= { xcmGenNotifyRule 2 }
xcmGenNotifyRuleEntry OBJECT-TYPE
SYNTAX XcmGenNotifyRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry for a notification rule (recipient/event list)
registered for event delivery from this host system."
INDEX { xcmGenNotifyRuleIndex }
::= { xcmGenNotifyRuleTable 1 }
XcmGenNotifyRuleEntry ::= SEQUENCE {
-- Notify Rule Info
xcmGenNotifyRuleIndex Ordinal32,
xcmGenNotifyRuleRowStatus RowStatus,
xcmGenNotifyRuleRowPersistence XcmGenRowPersistence,
xcmGenNotifyRuleRecipientURI XcmFixedLocaleDisplayString,
xcmGenNotifyRuleEventNames XcmFixedLocaleDisplayString,
xcmGenNotifyRuleEventDelay Cardinal32,
xcmGenNotifyRuleSeverityFilter XcmGenNotifySeverityFilter,
xcmGenNotifyRuleTrainingFilter XcmGenNotifyTrainingFilter,
xcmGenNotifyRuleCharset IANACharset,
xcmGenNotifyRuleNaturalLanguage DisplayString,
xcmGenNotifyRuleSequenceNumber Cardinal32
}
xcmGenNotifyRuleIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by this host system to identify this
conceptual row in the 'xcmGenNotifyRuleTable'."
REFERENCE "
See: Section 5.4.1 'notify-subscription-id' in IPP Notify."
::= { xcmGenNotifyRuleEntry 1 }
xcmGenNotifyRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to display the status of this conceptual row
in the 'xcmGenNotifyRuleTable'.
Usage: This object MAY be used to create ('createAndGo') and
delete ('destroy') dynamic rows in the 'xcmGenNotifyRuleTable'.
Also used to enable ('active') and disable ('notInService')
static rows in the 'xcmGenNotifyRuleTable'.
Usage: Conforming management agents SHOULD NOT support the
intermediate values 'notReady(3)' or 'createAndWait(5)'.
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: Section 11 'Operations for Notification' in IPP Notify.
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenNotifyRuleEntry 2 }
xcmGenNotifyRuleRowPersistence OBJECT-TYPE
SYNTAX XcmGenRowPersistence
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify the persistence of this
conceptual row in the 'xcmGenNotifyRuleTable' (and associated
conceptual rows in the 'xcmGenNotifyRuleDetailTable').
Usage: Dynamically created rows SHALL be given 'volatile'
or 'nonvolatile' persistence.
Usage: Conforming management agents SHALL NOT accept sets to
'xcmGenNotifyRuleRowPersistence'
AFTER row creation (this object is 'write-once').
Usage: Conforming management agents SHALL support
'volatile' (lost across power cycles), but NEED NOT support any
other levels of persistence."
REFERENCE "
See: Section 5.3.7 'notify-lease-duration' in IPP Notify.
See: Section 5.4.3 'lease-expiration-time' in IPP Notify."
DEFVAL { volatile } -- lost across power cycles
::= { xcmGenNotifyRuleEntry 3 }
xcmGenNotifyRuleRecipientURI OBJECT-TYPE
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify a single recipient URI (Uniform
Resource Identifier, per Generic URI Syntax, RFC 2396) for event
delivery for this notification rule (list of events), eg,
- 'mailto:joe@sample.com' (Email)
- 'mailto:VOICE=+3940226338@samplevoice.com' (Voice Mail)
- 'mailto:FAX=+1.800.5553000/T33S=6377@sampleserv.com' (IFax)
- 'ftp://machine.sample.com/pub/event_logs' (FTP logging)
Usage: 'ftp:' and 'http:' URLs specify paths for event logs.
Usage: MAY include parameters for SNMP and other URL schemes
(eg, 'snmp://machine.sample.com;version=2c;community=public'
for SNMPv2c delivery with community-name of 'public').
Usage: For additional recipients, use 'notifyRecipientURI'
notify details in the 'xcmGenNotifyRuleDetailTable'."
REFERENCE "
See: Section 5.3.1 'notify-recipient-uri' in IPP Notify.
See: Generic URI Syntax (RFC 2396).
See: The 'mailto:' URL Scheme (RFC 2368).
See: Minimal PSTN address in Internet Mail (RFC 2303).
See: Minimal FAX address in Internet Mail (RFC 2304)."
DEFVAL { ''H } -- no recipient URI specified
::= { xcmGenNotifyRuleEntry 4 }
xcmGenNotifyRuleEventNames OBJECT-TYPE
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify the subscribed events for this
notification rule, as a comma-delimited list of (standard)
keywords or (vendor or site-specific) names.
Usage: Keywords of IPP 'notify-events' and SNMP traps and
and SNMP state/alert enumeration keywords are interoperable
(eg, 'lowPaper,jammed' from IETF HR MIB, RFC 2790).
` Usage: Standard keywords MAY be scoped with their source, eg,
'notify-events.job-stopped,hrPrinterDetectedErrorState.jammed',
for clarity.
Usage: Conforming management stations and management agents
SHALL prefix non-standard names with 'x-' for compatibility."
REFERENCE "
See: Section 5.3.2 'notify-events' in IPP Notify.
See: TRAP-TYPE and NOTIFICATION-TYPE names in IETF/XCMI MIBs.
See: 'hrDeviceStatus' in IETF HR MIB (RFC 2790).
See: 'xcmHrDevInfoXStatus' in XCMI HRX MIB.
See: 'xcmHrDevInfoConditions' in XCMI HRX MIB.
See: 'hrPrinterDetectedErrorState' in IETF HR MIB (RFC 2790).
See: 'prtAlertCode' in IETF Printer MIB (RFC 1759)."
DEFVAL { ''H } -- no event names specified
::= { xcmGenNotifyRuleEntry 5 }
xcmGenNotifyRuleEventDelay OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify a delay timer in seconds for
event delivery that rate-limits (buffers) frequent events.
This timer is the minimum number of seconds between events
delivered for this notification rule ('xcmGenNotifyRuleIndex').
Usage: Conforming management agents (network devices) SHOULD
support server-side buffering of events for interoperability
(and improved performance) via 'xcmGenNotifyRuleEventDelay'.
Usage: Conforming management stations (recipients) SHOULD
support client-side buffering of events for interoperability
(and not depend on this 'xcmGenNotifyRuleEventDelay' object)."
REFERENCE "
See: Section 5.3.8 'notify-time-interval' in IPP Notify."
DEFVAL { 0 } -- no event delay specified
::= { xcmGenNotifyRuleEntry 6 }
xcmGenNotifyRuleSeverityFilter OBJECT-TYPE
SYNTAX XcmGenNotifySeverityFilter
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify the notification severity filter
used to 'screen' notifications for event delivery.
Usage: Notification details MAY further constrain which
notifications are 'in scope'."
REFERENCE "
See: 'prtAlertSeverityLevel' in IETF Printer MIB (RFC 1759).
See: 'XcmGenNotifySeverityFilter' in XCMI General TC.
See: 'xcmGenBaseNotifySeveritySupport' in XCMI General MIB."
DEFVAL { 15 } -- report, warning, error
::= { xcmGenNotifyRuleEntry 7 }
xcmGenNotifyRuleTrainingFilter OBJECT-TYPE
SYNTAX XcmGenNotifyTrainingFilter
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify the notification training filter
used to 'screen' notifications for event delivery.
Usage: Notification details MAY further constrain which
notifications are 'in scope'."
REFERENCE "
See: 'prtAlertTrainingLevel' in IETF Printer MIB (RFC 1759).
See: 'XcmGenNotifyTrainingFilter' in XCMI General TC.
See: 'xcmGenBaseNotifyTrainingSupport' in XCMI General MIB."
DEFVAL { 60 } -- none, trained, service, mgmt
::= { xcmGenNotifyRuleEntry 8 }
xcmGenNotifyRuleCharset OBJECT-TYPE
SYNTAX IANACharset
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify the notification charset
used for notification text in event messages, specified as an
IANA registered charset identifier, eg, 'MIBenum' value
(per RFC 2978).
Usage: If 'xcmGenNotifyRuleCharset' is 'other(1)', then the
value of 'xcmGenFixedLocalizationIndex' SHALL be used for a
notification rule locale specifier for charset."
REFERENCE "
See: Section 4.1.7 'charset' and section 4.4.17
'charset-configured' in IPP/1.1 (RFC 2911).
See: Section 5.3.5 'notify-charset' in IPP Notify.
See: IANA Charset Registration Procedures (RFC 2978).
See: Codes for Representation of Names of Charsets, ISO 3166
See: Codes for Representation of Names of Countries, ISO 639"
DEFVAL { other } -- no charset specified
::= { xcmGenNotifyRuleEntry 9 }
xcmGenNotifyRuleNaturalLanguage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to specify the notification natural language
used for notification text in event messages, specified as an
IETF 'language tag' (per RFC 3066).
Usage: If 'xcmGenNotifyRuleNaturalLanguage' is empty, then the
value of 'xcmGenFixedLocalizationIndex' SHALL be used for a
notification rule locale specifier for natural language."
REFERENCE "
See: Section 4.1.8 'naturalLanguage' and section 4.4.19
'natural-language-configured' in IPP/1.1 (RFC 2911).
See: Section 5.3.6 'notify-natural-language' in IPP Notify.
See: IETF Tags for Identification of Languages (RFC 3066).
See: Codes for Representation of Names of Languages, ISO 3166
See: Codes for Representation of Names of Countries, ISO 639"
DEFVAL { ''H } -- no natural language specified
::= { xcmGenNotifyRuleEntry 10 }
xcmGenNotifyRuleSequenceNumber OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
This object is used to specify the notification sequence number
last used for event delivery for this notification rule.
Usage: Conforming management agents SHOULD include the value
of 'xcmGenNotifyRuleSequenceNumber' in all event messages."
REFERENCE "
See: Section 5.4.2 'notify-sequence-number' in IPP Notify."
DEFVAL { 0 } -- initial sequence number
::= { xcmGenNotifyRuleEntry 11 }
--
-- Notify Detail Group (Cond Mandatory)
--
-- Implementation of this group is conditionally mandatory, ie,
-- mandatory for systems which implement event notification via
-- non-SNMP delivery methods and optional for all other systems.
--
-- Note: Systems implementing the Notify Detail group
-- SHALL implement the Notify Rule group.
--
-- Note: The Notify Detail group is functionally equivalent to
-- the Trap View group for non-SNMP event delivery methods.
xcmGenNotifyDetail OBJECT IDENTIFIER ::= { xcmGeneralMIB 18 }
--
-- NotifyDetail Simple Objects
--
xcmGenNotifyDetailSimple OBJECT-IDENTITY
STATUS current
DESCRIPTION "
This subtree is current. Subordinate objects are leaf objects."
::= { xcmGenNotifyDetail 1 }
xcmGenNotifyDetailEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The count of entries (rows) which are currently in the 'active'
state in 'xcmGenNotifyDetailTable'."
::= { xcmGenNotifyDetailSimple 1 }
xcmGenNotifyDetailSupportMax OBJECT-TYPE
SYNTAX Cardinal32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
The maximum number of simultaneous entries (rows) supported
for the 'xcmGenNotifyDetailTable'.
Usage: The value zero ('0') represents 'no limit'."
DEFVAL { 0 } -- no limit on support max count
::= { xcmGenNotifyDetailSimple 2 }
--
-- NotifyDetail Table Objects
--
xcmGenNotifyDetailTable OBJECT-TYPE
SYNTAX SEQUENCE OF XcmGenNotifyDetailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A 'sparse' table of notification detail information for
notification rules configured on this host system,
augmenting the basic entries in the 'xcmGenNotifyTable'.
Usage: UNLIKE the 'xcmGenOptionTable' in the XCMI General MIB
(which is a unique exception), this table of 'dictionary-based'
notify details is used with DIRECT create/update operations."
REFERENCE "
See: Section 5 'Subscription Object' and
Section 5.3 'Subscription Template Attributes' and
section 5.4 'Subscription Description Attributes' in
IPP Notify (draft-ietf-ipp-not-spec-06.txt)."
::= { xcmGenNotifyDetail 2 }
xcmGenNotifyDetailEntry OBJECT-TYPE
SYNTAX XcmGenNotifyDetailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
An entry of notification detail information for one of the
notification rules configured on this host system,
augmenting the basic entry in the 'xcmGenNotifyTable'."
INDEX { xcmGenNotifyRuleIndex,
xcmGenNotifyDetailType,
xcmGenNotifyDetailIndex }
::= { xcmGenNotifyDetailTable 1 }
XcmGenNotifyDetailEntry ::= SEQUENCE {
-- Notify Detail Info
xcmGenNotifyDetailType XcmGenNotifyDetailType,
xcmGenNotifyDetailIndex Ordinal32,
xcmGenNotifyDetailRowStatus RowStatus,
xcmGenNotifyDetailString XcmFixedLocaleDisplayString
}
xcmGenNotifyDetailType OBJECT-TYPE
SYNTAX XcmGenNotifyDetailType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
The type of notify detail stored in this conceptual row
in 'xcmGenNotifyDetailTable'.
Usage: Conforming XCMI management stations and agents SHALL
encode notify details as UTF-8 strings (like SLPv2, RFC 2608).
- Integers SHALL be encoded as (signed) decimal strings.
- Booleans SHALL be encoded as 'true' or 'false' strings.
- Strings SHALL be encoded as UTF-8 character strings.
- Binary data (e.g., 'userCertificate') SHALL be stored
in SLPv2 opaque encoding (leading '\FF' and escaped octets).
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information in 'xcmGenNotifyDetailString'."
REFERENCE "
See: Section 5 'Subscription Object' and
Section 5.3 'Subscription Template Attributes' and
section 5.4 'Subscription Description Attributes' in
IPP Notify (draft-ietf-ipp-not-spec-06.txt).
See: Section 5 'Service Attributes' (encoding rules) in
Service Location Protocol v2 (RFC 2608)."
::= { xcmGenNotifyDetailEntry 1 }
xcmGenNotifyDetailIndex OBJECT-TYPE
SYNTAX Ordinal32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "
A unique value used by this host system to identify this
conceptual row in the 'xcmGenNotifyDetailTable', OR a common
value shared across a set of related conceptual rows (with
different values of 'xcmGenNotifyDetailType'."
::= { xcmGenNotifyDetailEntry 2 }
xcmGenNotifyDetailRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
This object is used to display the status of this conceptual row
in the 'xcmGenNotifyDetailTable'.
Usage: This object MAY be used to create ('createAndGo') and
delete ('destroy') dynamic rows in 'xcmGenNotifyDetailTable'.
Also used to enable ('active') and disable ('notInService')
static rows in the 'xcmGenNotifyTable'.
Usage: Conforming management agents SHOULD NOT support the
intermediate values 'notReady(3)' or 'createAndWait(5)'.
Usage: See section 3.4 'Secure Modes of Operation' and section
3.5 'Secure SNMP Get/Set Requests' in XCMI Security TC, for
details of secure modes of access to this row status object."
REFERENCE "
See: Section 11 'Operations for Notification' in IPP Notify.
See: 'RowStatus' in IETF SNMPv2 TC (RFC 1443/1903/2579).
See: 'xcmHrDevMgmtCommandData' in XCMI HRX MIB and
'xcmSecUserMgmtData' in XCMI Security MIB."
::= { xcmGenNotifyDetailEntry 3 }
xcmGenNotifyDetailString OBJECT-TYPE
SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "
The string notify detail value stored in this conceptual row
in 'xcmGenNotifyDetailTable'.
Usage: Conforming XCMI management stations and agents SHALL
encode notify details as UTF-8 strings (like SLPv2, RFC 2608).
- Integers SHALL be encoded as (signed) decimal strings.
- Booleans SHALL be encoded as 'true' or 'false' strings.
- Strings SHALL be encoded as UTF-8 character strings.
- Binary data (e.g., 'userCertificate') SHALL be stored
in SLPv2 opaque encoding (leading '\FF' and escaped octets).
Usage: Conformant implementations MUST encrypt passwords, keys,
and other security information in 'xcmGenNotifyDetailString'."
REFERENCE "
See: Section 5 'Subscription Object' and
Section 5.3 'Subscription Template Attributes' and
section 5.4 'Subscription Description Attributes' in
IPP Notify (draft-ietf-ipp-not-spec-06.txt).
See: Section 5 'Service Attributes' (encoding rules) in
Service Location Protocol v2 (RFC 2608)."
DEFVAL { ''H } -- no detail value string
::= { xcmGenNotifyDetailEntry 4 }
--
-- General MIB Conformance Information
--
-- With Mandatory and Optional Conformance Groups
xcmGeneralMIBConformance
OBJECT IDENTIFIER ::= { xcmGeneralMIB 2 }
xcmGeneralMIBGroups
OBJECT IDENTIFIER ::= { xcmGeneralMIBConformance 2 }
--
-- Compliance Statements
--
xcmGeneralMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "
The compliance statements for SNMP management agents that
implement the General MIB."
MODULE -- this module
MANDATORY-GROUPS {
xcmGenBaseGroup,
xcmGenTrapClientGroup,
xcmGenTrapViewGroup
}
GROUP xcmGenCurrentLocalizationGroup
DESCRIPTION "
This group controls the localization of dynamic string objects
of type 'InternationalDisplayString' in legacy MIBs.
Implementation of this group is conditionally mandatory, ie,
mandatory for all systems which support MIB objects with type
'InternationalDisplayString'
and optional for all other systems."
GROUP xcmGenLocalizationGroup
DESCRIPTION "
This group declares supported localizations for string objects
of type 'InternationalDisplayString' in legacy MIBs and
of type 'XcmFixedLocaleDisplayString'
or 'Xcm[Fixed|Mamed]LocaleUtf8String' in XCMI MIBs.
Implementation of this group is conditionally mandatory, ie,
mandatory for all systems which support MIB objects with type
'InternationalDisplayString', 'XcmFixedLocaleDisplayString',
'XcmFixedLocaleUtf8String', or 'XcmNamedLocaleUtf8String'
and optional for all other systems."
GROUP xcmGenCodeIndexedStringGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory:
Mandatory for all systems which implement MIB objects of type
'CodeIndexedStringIndex' or implement the
'xcmGenCodedCharSetGroup'."
GROUP xcmGenCodedCharSetGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory:
Mandatory for all systems which implement MIB objects of type
'CodeIndexedStringIndex' or implement the
'xcmGenCodeIndexedStringGroup'."
GROUP xcmGenFixedLocalizationGroup
DESCRIPTION "
This group controls the localization of static string objects
of type 'XcmFixedLocaleDisplayString'
or 'Xcm[Fixed|Mamed]LocaleUtf8String' in XCMI MIBs.
Implementation of this group is conditionally mandatory, ie,
mandatory for all systems which support MIB objects with type
'XcmFixedLocaleDisplayString',
'XcmFixedLocaleUtf8String', or 'XcmNamedLocaleUtf8String'
and optional for all other systems."
GROUP xcmGenLockGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory, ie,
mandatory for systems which support advisory contention
locks, and optional for all other systems.
Implementation of this group is conditionally mandatory,
however it SHALL be implemented by systems which
implement the 'xcmGenReconfGroup' and 'xcmGenOptionGroup'."
GROUP xcmGenReconfGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory, ie,
mandatory for systems which support tree structured
atomic reconfiguration, and optional for all other systems.
Implementation of this group is conditionally mandatory,
however it SHALL be implemented by systems which
implement the 'xcmGenOptionGroup'.
Usage: Systems which implement the 'xcmGenReconfGroup'
and 'xcmGenOptionGroup' SHALL also implement
the 'xcmGenLockGroup' (for advisory contention locks)."
GROUP xcmGenOptionGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory, ie,
mandatory for systems which support tree structured
atomic reconfiguration, and optional for all other systems.
--
Implementation of this group is conditionally mandatory,
however it SHALL be implemented by systems which
implement the 'xcmGenReconfGroup'.
--
Usage: Systems which implement the 'xcmGenReconfGroup'
and 'xcmGenOptionGroup' SHALL also implement
the 'xcmGenLockGroup' (for advisory contention locks)."
GROUP xcmGenClientDataGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory, ie,
mandatory for systems which support 'client data' for remote
management stations, and optional for all other systems.
Usage: Conforming implementations SHALL preserve active
'client data' objects across management agent power cycles."
GROUP xcmGenMessageMapGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement message label lookups
of agent-supplied strings and optional for all other systems."
GROUP xcmGenMessageTextGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement message translations
of agent-supplied strings and optional for all other systems."
GROUP xcmGenNotifyRuleGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement event notification via
non-SNMP delivery methods and optional for all other systems.
Note: Systems implementing the Notify Rule group
SHALL implement the Notify Detail group.
Note: The Notify Rule group is functionally equivalent to
the Trap Client group for non-SNMP event delivery methods."
GROUP xcmGenNotifyDetailGroup
DESCRIPTION "
Implementation of this group is conditionally mandatory, ie,
mandatory for systems which implement event notification via
non-SNMP delivery methods and optional for all other systems.
Note: Systems implementing the Notify Detail group
SHALL implement the Notify Rule group.
Note: The Notify Detail group is functionally equivalent to
the Trap View group for non-SNMP event delivery methods."
OBJECT xcmGenBaseSNMPReadCommunity
SYNTAX OCTET STRING (SIZE (0..1))
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only.
Usage: All XCMI conforming management agents are
STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest
to this object, changing the system 'read community name'
(for best interworking with third-party management stations)."
OBJECT xcmGenBaseSNMPWriteCommunity
SYNTAX OCTET STRING (SIZE (0..1))
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only.
Usage: All XCMI conforming management agents are
STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest
to this object, changing the system 'write community name'
(for best interworking with third-party management stations)."
OBJECT xcmGenBaseSNMPTrapCommunity
SYNTAX OCTET STRING (SIZE (0..1))
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only.
Usage: All XCMI conforming management agents are
STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest
to this object, changing the system 'trap community name'
(for best interworking with third-party management stations)."
OBJECT xcmGenBaseGroupWalkHidden
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only.
XCMI conforming management agents NEED NOT support changing of
MIB walk 'hidden' groups by remote management stations."
OBJECT xcmGenCurrentLocalizationIndex
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only"
OBJECT xcmGenCurrLocalizationRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmGenLocalizationRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmGenLocalizationASCIIName
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only"
OBJECT xcmGenLocalizationName
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only"
OBJECT xcmGenLocalizationLanguage
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only"
OBJECT xcmGenLocalizationCountry
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only"
OBJECT xcmGenLocalizationCharSet
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only"
OBJECT xcmGenCodeIndexedStringRowStat
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmGenCodeIndexedStringData
SYNTAX OCTET STRING (SIZE (0..32))
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only 32 octets maximum string length need be supported."
OBJECT xcmGenCodedCharSetRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmGenCodedCharSetASCIIName
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only"
OBJECT xcmGenFixedLocalizationIndex
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only"
OBJECT xcmGenFixedLocalizationRowStat
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmGenLockRowStatus
SYNTAX INTEGER { -- subset of RowStatus
active(1),
notInService(2)
-- notReady(3),
-- createAndGo(4)
-- createAndWait(5),
-- destroy(6)
}
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write, and
only two of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically:
active(1) and notInService(2)."
OBJECT xcmGenLockOwnerString
-- SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
SYNTAX OCTET STRING (SIZE (0..32))
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write, and
only 32 octets maximum string length need be supported."
OBJECT xcmGenLockOwnerSubtree
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenLockOwnerTimer
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenReconfRowStatus
SYNTAX INTEGER { -- subset of RowStatus
active(1),
notInService(2)
-- notReady(3),
-- createAndGo(4)
-- createAndWait(5),
-- destroy(6)
}
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write, and
only two of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically:
active(1) and notInService(2)."
OBJECT xcmGenReconfOptionIndex
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenReconfOptionState
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionRowStatus
SYNTAX INTEGER { -- subset of RowStatus
active(1),
notInService(2)
-- notReady(3),
-- createAndGo(4)
-- createAndWait(5),
-- destroy(6)
}
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write, and
only two of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically:
active(1) and notInService(2)."
OBJECT xcmGenOptionTypeOID
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionValueSyntax
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionValueInteger
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionValueOID
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionValueString
-- SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
SYNTAX OCTET STRING (SIZE (0..32))
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write, and
only 32 octets maximum string length need be supported."
OBJECT xcmGenOptionValueLocalization
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionValueCodedCharSet
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionNextIndex
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionPreviousIndex
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenOptionFamilyIndex
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenClientDataRowStatus
SYNTAX INTEGER { -- subset of RowStatus
active(1),
notInService(2)
-- notReady(3),
-- createAndGo(4)
-- createAndWait(5),
-- destroy(6)
}
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write, and
only two of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically:
active(1) and notInService(2)."
OBJECT xcmGenClientDataRequestID
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenClientDataProductID
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write."
OBJECT xcmGenClientDataLength
SYNTAX INTEGER (0..1)
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write, and
only 1 octet maximum client data length need be supported."
OBJECT xcmGenClientDataString
SYNTAX OCTET STRING (SIZE (0..1))
MIN-ACCESS read-write
DESCRIPTION "
It is conformant to implement this object as read-write, and
only 1 octet maximum client data length need be supported."
-- OBJECT xcmGenTrapClientSNMPDomain
-- SYNTAX INTEGER {
-- }
-- DESCRIPTION "
-- It is conformant to implement this object as above, and
-- no specific enumerated values for the 'XcmGenSNMPDomain'
-- textual convention need be supported."
-- OBJECT xcmGenTrapClientSNMPAddress
-- SYNTAX XcmFixedLocaleDisplayString (SIZE (0..32))
-- SYNTAX OCTET STRING (SIZE (0..32))
-- DESCRIPTION "
-- It is conformant to implement this object as above, and
-- only 32 octets maximum string length need be supported."
OBJECT xcmGenTrapClientRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
Usage: It is conformant to implement this object as read-only,
however, conforming management agents are STRONGLY RECOMMENDED
to support at least read-write access to this object."
OBJECT xcmGenTrapClientRowPersistence
SYNTAX INTEGER {
-- other(1),
-- unknown(2),
volatile(3) -- lost across power cycles
-- nonvolatile(4), saved across power cycles
-- permanent(5), read-write, and no deletion
-- readonly(6) read-only, and no deletion
}
MIN-ACCESS read-only
DESCRIPTION "
Usage: It is conformant to implement this object as read-only,
however, conforming management agents are STRONGLY RECOMMENDED
to support at least read-write access to this object.
Usage: Conforming management agents SHALL support
'volatile' (lost across power cycles).
Usage: Conforming management agents are STRONGLY RECOMMENDED to
support 'nonvolatile' (preserved across power cycles),
but NEED NOT support any other levels of persistence."
OBJECT xcmGenTrapClientSNMPVersion
SYNTAX INTEGER {
unknown(1), -- indeterminate
other(2), -- some other version
snmpV1Community(3)
-- snmpV1Party(4),
-- snmpV2Party(5),
-- snmpV2Community(6),
-- snmpV2Usec(7),
-- snmpV2Star(8),
-- snmpV2Secure(9),
-- snmpV3Secure(10)
}
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and only
those specified enumerated values for the 'XcmGenSNMPVersion'
textual convention need be supported,
specifically: snmpV1Community(3)."
OBJECT xcmGenTrapClientSNMPCommunity
SYNTAX OCTET STRING (SIZE (0..1))
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only 1 octet maximum string length need be supported.
XCMI conforming management agents NEED NOT support changing of
SNMP community strings by remote management stations."
OBJECT xcmGenTrapViewRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and only
those specified enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmGenTrapViewNotifySeverity
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenTrapViewNotifyTraining
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenMessageMapStringLabel
SYNTAX XcmGenMessageMapStringLabel (SIZE (0..64))
DESCRIPTION "
It is conformant to implement this object as read-only, and
only 64 octets maximum string length need be supported."
OBJECT xcmGenMessageTextTargetString
SYNTAX XcmNamedLocaleUtf8String (SIZE (0..64))
DESCRIPTION "
It is conformant to implement this object as read-only, and
only 64 octets maximum string length need be supported."
OBJECT xcmGenNotifyRuleRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmGenNotifyRuleRowPersistence
SYNTAX INTEGER {
-- other(1),
-- unknown(2),
volatile(3) -- lost across power cycles
-- nonvolatile(4), saved across power cycles
-- permanent(5), read-write, and no deletion
-- readonly(6) read-only, and no deletion
}
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'xcmGenRowPersistence'
textual convention need be supported,
specifically: volatile(3)."
OBJECT xcmGenNotifyRuleRecipientURI
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenNotifyRuleEventNames
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenNotifyRuleEventDelay
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenNotifyRuleSeverityFilter
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenNotifyRuleTrainingFilter
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenNotifyRuleCharset
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenNotifyRuleNaturalLanguage
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
OBJECT xcmGenNotifyDetailRowStatus
SYNTAX INTEGER { active(1) } -- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only, and
only one of the enumerated values for the 'RowStatus' textual
convention need be supported, specifically: active(1)."
OBJECT xcmGenNotifyDetailString
MIN-ACCESS read-only
DESCRIPTION "
It is conformant to implement this object as read-only."
::= { xcmGeneralMIBConformance 3 }
--
-- Conformance Groups
--
xcmGenBaseGroup OBJECT-GROUP
OBJECTS {
-- General MIB Info
xcmGenBaseRowStatus,
xcmGenBaseSystemHrDeviceIndex,
-- General MIB Capabilities Info
xcmGenBaseGroupSupport,
xcmGenBaseGroupCreateSupport,
xcmGenBaseGroupUpdateSupport,
xcmGenBaseClientDataMaxSupport,
xcmGenBaseOptionSyntaxSupport,
xcmGenBaseReconfStateSupport,
xcmGenBaseSNMPDomainSupport,
xcmGenBaseSNMPTrapSupport,
xcmGenBaseSNMPVersionSupport,
-- General MIB Community Name Info
xcmGenBaseSNMPReadCommunity,
xcmGenBaseSNMPWriteCommunity,
xcmGenBaseSNMPTrapCommunity,
-- General MIB Traversal Info
xcmGenBaseGroupWalkHidden,
-- General MIB Notification Info
xcmGenBaseNotifySchemeSupport,
xcmGenBaseNotifySeveritySupport,
xcmGenBaseNotifyTrainingSupport,
xcmGenBaseSystem1284DeviceId,
xcmGenBaseSNMPWarningTrapSupport
}
STATUS current
DESCRIPTION "
General Base Group (XCMI General MIB capabilities)"
::= { xcmGeneralMIBGroups 1 }
xcmGenCurrentLocalizationGroup OBJECT-GROUP
OBJECTS {
-- Current Localization Info
xcmGenCurrentLocalizationIndex,
xcmGenCurrLocalizationRowStatus
}
STATUS current
DESCRIPTION "
Current Localization Group (dynamic locales)"
::= { xcmGeneralMIBGroups 3 }
xcmGenLocalizationGroup OBJECT-GROUP
OBJECTS {
-- Supported Localization Info
xcmGenLocalizationRowStatus,
xcmGenLocalizationASCIIName,
xcmGenLocalizationName,
xcmGenLocalizationLanguage,
xcmGenLocalizationCountry,
xcmGenLocalizationCharSet
}
STATUS current
DESCRIPTION "
General Localization Group (supported dynamic/static locales)"
::= { xcmGeneralMIBGroups 4 }
xcmGenCodeIndexedStringGroup OBJECT-GROUP
OBJECTS {
-- Code Indexed String Info
xcmGenCodeIndexedStringRowStat,
xcmGenCodeIndexedStringData
}
STATUS current
DESCRIPTION "
Code Indexed String Group (charset conversions)"
::= { xcmGeneralMIBGroups 5 }
xcmGenCodedCharSetGroup OBJECT-GROUP
OBJECTS {
-- Supported Coded Chararcter Set Info
xcmGenCodedCharSetRowStatus,
xcmGenCodedCharSetASCIIName
}
STATUS current
DESCRIPTION "
Coded Character Set Group (supported IANA-registered charsets)"
::= { xcmGeneralMIBGroups 6 }
xcmGenFixedLocalizationGroup OBJECT-GROUP
OBJECTS {
-- Fixed Localization Info
xcmGenFixedLocalizationIndex,
xcmGenFixedLocalizationRowStat
}
STATUS current
DESCRIPTION "
Fixed Localization Group (static locales)"
::= { xcmGeneralMIBGroups 7 }
xcmGenLockGroup OBJECT-GROUP
OBJECTS {
-- General Lock Simple Objects
xcmGenLockSupportMaxTimer,
xcmGenLockCurrentMaxTimer,
xcmGenLockCurrentLockCount,
xcmGenLockHighestLockIndex,
xcmGenLockSupportMaxCount,
-- General Lock Info
xcmGenLockRowStatus,
xcmGenLockOwnerString,
xcmGenLockOwnerSubtree,
xcmGenLockOwnerTimer
}
STATUS current
DESCRIPTION "
General Lock Group (advisory contention locks)
Implementation of this group is STRONGLY RECOMMENDED."
::= { xcmGeneralMIBGroups 8 }
xcmGenReconfGroup OBJECT-GROUP
OBJECTS {
-- General Reconf Simple Objects
xcmGenReconfActivations,
xcmGenReconfEntryCount,
xcmGenReconfSupportMaxCount,
-- General Reconf Info
xcmGenReconfRowStatus,
xcmGenReconfOptionIndex,
xcmGenReconfOptionState,
xcmGenReconfErrorIndex,
xcmGenReconfErrorStatus
}
STATUS current
DESCRIPTION "
General Reconf Group (reconfiguration requests)"
::= { xcmGeneralMIBGroups 9 }
xcmGenOptionGroup OBJECT-GROUP
OBJECTS {
-- General Option Simple Objects
xcmGenOptionEntryCount,
xcmGenOptionSupportMaxCount,
-- General Option Info
xcmGenOptionRowStatus,
xcmGenOptionTypeOID,
xcmGenOptionValueSyntax,
xcmGenOptionValueInteger,
xcmGenOptionValueOID,
xcmGenOptionValueString,
xcmGenOptionValueLocalization,
xcmGenOptionValueCodedCharSet,
-- General Option Common Cross References
xcmGenOptionNextIndex,
xcmGenOptionPreviousIndex,
xcmGenOptionFamilyIndex
}
STATUS current
DESCRIPTION "
General Option Group (reconfiguration options)"
::= { xcmGeneralMIBGroups 10 }
xcmGenClientDataGroup OBJECT-GROUP
OBJECTS {
-- Client Data Simple Objects
xcmGenClientDataEntryCount,
xcmGenClientDataLastIndex,
xcmGenClientDataSupportMaxCount,
-- General Client Data Info
xcmGenClientDataRowStatus,
xcmGenClientDataRequestDate,
xcmGenClientDataRequestID,
xcmGenClientDataProductID,
xcmGenClientDataLength,
xcmGenClientDataString
}
STATUS current
DESCRIPTION "
Client Data Group (network device installs/upgrades)"
::= { xcmGeneralMIBGroups 11 }
-- ::= { xcmGeneralMIBGroups 12 } - Reserved (deleted arc)
xcmGenTrapClientGroup OBJECT-GROUP
OBJECTS {
-- Trap Client Simple Objects
xcmGenTrapClientEntryCount,
xcmGenTrapClientSupportMaxCount,
-- Trap Client Info
xcmGenTrapClientRowStatus,
xcmGenTrapClientIndex,
xcmGenTrapClientRowPersistence,
xcmGenTrapClientSNMPVersion,
-- Trap Client Community Info
xcmGenTrapClientSNMPCommunity
}
STATUS current
DESCRIPTION "
Trap Client Group (trap destination domains/addresses)"
::= { xcmGeneralMIBGroups 13 }
xcmGenTrapViewGroup OBJECT-GROUP
OBJECTS {
-- Trap View Simple Objects
xcmGenTrapViewEntryCount,
xcmGenTrapViewSupportMaxCount,
-- Trap View (Scope) Info
xcmGenTrapViewRowStatus,
xcmGenTrapViewNotifySeverity,
xcmGenTrapViewNotifyTraining
}
STATUS current
DESCRIPTION "
Trap View Group (trap requested object subtrees)"
::= { xcmGeneralMIBGroups 14 }
xcmGenMessageMapGroup OBJECT-GROUP
OBJECTS {
-- Message Map Info
xcmGenMessageMapStringLabel
}
STATUS current
DESCRIPTION "
Message Map Group (message labels for client localization)"
::= { xcmGeneralMIBGroups 15 }
xcmGenMessageTextGroup OBJECT-GROUP
OBJECTS {
-- Message Text Info
xcmGenMessageTextTargetString
}
STATUS current
DESCRIPTION "
Message Text Group (message lookups for agent localization)"
::= { xcmGeneralMIBGroups 16 }
xcmGenNotifyRuleGroup OBJECT-GROUP
OBJECTS {
-- Notify Rule Simple Objects
xcmGenNotifyRuleEntryCount,
xcmGenNotifyRuleSupportMaxCount,
-- Notify Rule Info
xcmGenNotifyRuleRowStatus,
xcmGenNotifyRuleRowPersistence,
xcmGenNotifyRuleRecipientURI,
xcmGenNotifyRuleEventNames,
xcmGenNotifyRuleEventDelay,
xcmGenNotifyRuleSeverityFilter,
xcmGenNotifyRuleTrainingFilter,
xcmGenNotifyRuleCharset,
xcmGenNotifyRuleNaturalLanguage,
xcmGenNotifyRuleSequenceNumber
}
STATUS current
DESCRIPTION "
Notify Rule Group (notification client URI and event names)"
::= { xcmGeneralMIBGroups 17 }
xcmGenNotifyDetailGroup OBJECT-GROUP
OBJECTS {
-- Notify Detail Simple Objects
xcmGenNotifyDetailEntryCount,
xcmGenNotifyDetailSupportMax,
-- Notify Detail Info
xcmGenNotifyDetailRowStatus,
xcmGenNotifyDetailString
}
STATUS current
DESCRIPTION "
Notify Detail Group (notification additional details)"
::= { xcmGeneralMIBGroups 18 }
END
View Git Blame Copy Permalink