328 lines
11 KiB
Plaintext
328 lines
11 KiB
Plaintext
-- *****************************************************************
|
|
-- WESTERMO-SW6-BRIDGE-MIB :
|
|
-- SNMP feature configuration of Westermo devices with SW6.
|
|
--
|
|
-- Copyright (c) 2018 by Westermo Teleindustri AB
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
-- *****************************************************************
|
|
-- This script has been tested using the SMI checker smilint
|
|
-- the tool can be downloaded at
|
|
-- http://www.ibr.cs.tu-bs.de/projects/libsmi/smilint.html
|
|
-- or use alternatively the online version at:
|
|
-- http://www.simpleweb.org/ietf/mibs/validate/
|
|
--
|
|
-- smilint -m -s -l 6 -i nameLength-32 ./WESTERMO-SW6-BRIDGE-MIB
|
|
-- Ensure that all needed MIBS are located in the SMIPATH.
|
|
-- *****************************************************************
|
|
|
|
-- **********************************************************************
|
|
-- * RSTP MIB
|
|
-- **********************************************************************
|
|
|
|
WESTERMO-SW6-BRIDGE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
Integer32 FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
DisplayString FROM SNMPv2-TC
|
|
;
|
|
|
|
-- **********************************************************************
|
|
-- * MODULE IDENTITY
|
|
-- **********************************************************************
|
|
rstp MODULE-IDENTITY
|
|
LAST-UPDATED "201909060000Z"
|
|
|
|
ORGANIZATION "Westermo Teleindustri AB"
|
|
CONTACT-INFO "E-mail: info@westermo.com"
|
|
DESCRIPTION "MIB Module for the Westermo RT-300 Radio Modem Device - Bridge definitions"
|
|
|
|
REVISION "201909060000Z"
|
|
DESCRIPTION "Release 6.9.0-RC0"
|
|
|
|
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)
|
|
westermo(16177) products(1) rt(400) feature(2) 8 }
|
|
|
|
-- **********************************************************************
|
|
-- * Begin Major sections
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
-- Configuration
|
|
-- =============
|
|
|
|
configuration OBJECT IDENTIFIER ::= { rstp 1 }
|
|
cfgRstpBridge OBJECT IDENTIFIER ::= { configuration 1 }
|
|
cfgRstpPort OBJECT IDENTIFIER ::= { configuration 2 }
|
|
|
|
-- Conformance Information
|
|
-- =======================
|
|
|
|
conformance OBJECT IDENTIFIER ::= { rstp 10000 }
|
|
groups OBJECT IDENTIFIER ::= { conformance 1 }
|
|
groupConfiguration OBJECT IDENTIFIER ::= { groups 1 }
|
|
|
|
compliances OBJECT IDENTIFIER ::= { conformance 2 }
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End Major Sections
|
|
-- **********************************************************************
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Begin Object Types
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
cfgRstpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CfgRstpPortTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSTP port configuration table.
|
|
"
|
|
::= { cfgRstpPort 1 }
|
|
|
|
cfgRstpPortTableEntry OBJECT-TYPE
|
|
SYNTAX CfgRstpPortTableSeq
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSTP port configuration table entry.
|
|
"
|
|
INDEX {cfgRstpPortIndex}
|
|
::= { cfgRstpPortTable 1 }
|
|
|
|
CfgRstpPortTableSeq ::=
|
|
SEQUENCE { cfgRstpPortIndex Integer32,
|
|
cfgRstpPortEnabled INTEGER,
|
|
cfgRstpPortName DisplayString,
|
|
cfgRstpPortPriority Integer32,
|
|
cfgRstpPortPathCost Integer32,
|
|
cfgRstpPortAutoEdge INTEGER
|
|
}
|
|
|
|
cfgRstpBridgeEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable RSTP on bridge.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpBridge 1 }
|
|
|
|
cfgRstpBridgePriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..61440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bridge's relative priority value for determining the root
|
|
bridge (the upper 16 bits of the bridge-id). A bridge with the
|
|
lowest bridge-id is elected the root. By default, the priority is
|
|
0x8000 (32768). This value needs to be a multiple of 4096,
|
|
otherwise it's rounded to the nearest inferior one.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpBridge 2 }
|
|
|
|
cfgRstpBridgeHelloTime OBJECT-TYPE
|
|
SYNTAX Integer32 (2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval between transmissions of hello messages by designated
|
|
ports, in seconds. By default the hello interval is 2 seconds.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpBridge 3 }
|
|
|
|
cfgRstpBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (4..30)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The delay used by STP bridges to transition root and designated
|
|
ports to forwarding. The default value is 15.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpBridge 4 }
|
|
|
|
cfgRstpBridgeMaxAge OBJECT-TYPE
|
|
SYNTAX Integer32 (6..40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum age of the information transmitted by the bridge when
|
|
it is the root bridge. The default value is 20.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpBridge 5 }
|
|
|
|
cfgRstpBridgeTransmitHoldCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit hold count used by the port transmit state machine
|
|
to limit transmission rate. The default value is 6.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpBridge 6 }
|
|
|
|
cfgRstpPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..18)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index of port forward table.
|
|
"
|
|
::= { cfgRstpPortTableEntry 1 }
|
|
|
|
cfgRstpPortEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable RSTP on port.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpPortTableEntry 2 }
|
|
|
|
cfgRstpPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port name to apply settings, e.g. eth0 or wlan0.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpPortTableEntry 3 }
|
|
|
|
cfgRstpPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's relative priority value for determining the root port,
|
|
in multiples of 16. By default, the port priority is 0x80 (128).
|
|
Any value in the lower 4 bits is rounded off. The significant upper
|
|
4 bits become the upper 4 bits of the port-id. A port with the
|
|
lowest port-id is elected as the root.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpPortTableEntry 4 }
|
|
|
|
cfgRstpPortPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..5000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port path cost. The port's contribution, when it is the root
|
|
port, to the root path cost for the bridge. By default the cost is
|
|
automatically calculated from the port's speed. If -1 is defined,
|
|
the port path cost is automatically calculated.
|
|
|
|
| Data rate | RSTP cost (802.1W-2004, default value) |
|
|
|------------|----------------------------------------|
|
|
| 4 Mbit/s | 5,000,000 |
|
|
| 10 Mbit/s | 2,000,000 |
|
|
| 16 Mbit/s | 1,250,000 |
|
|
| 100 Mbit/s | 200,000 |
|
|
| 1 Gbit/s | 20,000 |
|
|
| 2 Gbit/s | 10,000 |
|
|
| 10 Gbit/s | 2,000 |
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpPortTableEntry 5 }
|
|
|
|
cfgRstpPortAutoEdge OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The auto edge port parameter allows the automatic detection of
|
|
edge ports.
|
|
|
|
Ports can be configured as edge ports to facilitate rapid
|
|
changes to the forwarding state when connected to endpoints.
|
|
|
|
If enabled, the port will look for BPDUs; if there are none
|
|
it begins forwarding packets.
|
|
It is recommended to disable auto-edge for non-edge ports.
|
|
|
|
Applies to AP and STA.
|
|
"
|
|
::= { cfgRstpPortTableEntry 6 }
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End of Object Types
|
|
-- *********************************************************************
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Begin GROUPS
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
groupConfigRstp OBJECT-GROUP
|
|
OBJECTS {
|
|
cfgRstpBridgeEnabled,
|
|
cfgRstpBridgePriority,
|
|
cfgRstpBridgeHelloTime,
|
|
cfgRstpBridgeForwardDelay,
|
|
cfgRstpBridgeMaxAge,
|
|
cfgRstpBridgeTransmitHoldCount,
|
|
cfgRstpPortEnabled,
|
|
cfgRstpPortName,
|
|
cfgRstpPortPriority,
|
|
cfgRstpPortPathCost,
|
|
cfgRstpPortAutoEdge
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSTP configuration."
|
|
::= { groupConfiguration 1 }
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End GROUPS
|
|
-- **********************************************************************
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Begin COMPLIANCE STATEMENTS
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
|
|
compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Implementation Requirements for DT50 bindings"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
groupConfigRstp
|
|
}
|
|
::= { compliances 1 }
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End COMPLIANCE STATEMENTS
|
|
-- **********************************************************************
|
|
|
|
-- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
-- * End of MIB DEFINITION
|
|
-- **********************************************************************
|
|
END
|
|
|
|
|
|
-- **********************************************************************
|
|
-- **********************************************************************
|