WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/trapeze/TRAPEZE-NETWORKS-TRAP-MIB

4119 lines
145 KiB
Plaintext
Raw Permalink Blame History

TRAPEZE-NETWORKS-TRAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
IpAddress, Unsigned32, TimeTicks, Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, MacAddress
FROM SNMPv2-TC
InetAddressType, InetAddress, InetAddressIPv4, InetAddressIPv6
FROM INET-ADDRESS-MIB
TrpzApAttachType, TrpzRadioType, TrpzRadioMode,
TrpzApNum, TrpzApRadioIndex, TrpzApSerialNum, TrpzApFingerprint,
TrpzAccessType, TrpzRadioNum, TrpzPowerLevel,
TrpzRadioPowerChangeType, TrpzChannelChangeType,
TrpzApTransition, TrpzApFailDetail, TrpzApPortOrDapNum,
TrpzRadioConfigState, TrpzApConnectSecurityType,
TrpzApServiceAvailability, TrpzApWasOperational,
TrpzRadioChannelWidth, TrpzRadioMimoState,
TrpzChannelNum, TrpzCryptoType, TrpzRssi
FROM TRAPEZE-NETWORKS-AP-TC
TrpzClientSessionState, TrpzClientAuthenProtocolType,
TrpzClientDot1xState, TrpzUserAccessType,
TrpzClientAccessMode, TrpzClientDeviceProfileName,
TrpzClientDeviceType, TrpzClientDeviceGroupName
FROM TRAPEZE-NETWORKS-CLIENT-SESSION-TC
TrpzRFDetectClassificationReason
FROM TRAPEZE-NETWORKS-RF-DETECT-TC
TrpzRFNoiseSourceID, TrpzRFNoiseSourceType
FROM TRAPEZE-NETWORKS-RF-NOISE-TC-MIB
TrpzIpPort,
TrpzPhysPortNumberOrZero
FROM TRAPEZE-NETWORKS-BASIC-TC
trpzTraps, trpzTemporary, trpzMibs
FROM TRAPEZE-NETWORKS-ROOT-MIB;
trpzTrapMib MODULE-IDENTITY
LAST-UPDATED "201207310406Z"
ORGANIZATION "Trapeze Networks"
CONTACT-INFO
"Trapeze Networks Technical Support
www.trapezenetworks.com
US: 866.TRPZ.TAC
International: 925.474.2400
support@trapezenetworks.com"
DESCRIPTION
"Notifications emitted by Trapeze Networks wireless switches.
AP = Access Point;
AC = Access Controller (wireless switch),
the device that runs a SNMP Agent implementing this MIB.
Copyright 2004-2012 Trapeze Networks, Inc.
All rights reserved.
This Trapeze Networks SNMP Management Information Base
Specification (Specification) embodies Trapeze Networks'
confidential and proprietary intellectual property.
Trapeze Networks retains all title and ownership in
the Specification, including any revisions.
This Specification is supplied 'AS IS' and Trapeze Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
REVISION "201207310406Z"
DESCRIPTION "v4.4.6: Updated the descriptions of the following objects:
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr.
This will be published in 8.0 release."
REVISION "201204200405Z"
DESCRIPTION "v4.4.5: Added new traps:
trpzClientDeviceTypeChangeTrap,
trpzClientDeviceProfileChangeTrap;
related TC:
TrpzClientDeviceProfileChangeReason;
and related objects:
trpzClientDeviceType,
trpzClientDeviceTypeOld,
trpzClientDeviceGroup,
trpzClientDeviceProfileName,
trpzClientDeviceProfileNameOld,
trpzClientDeviceProfileChangeReason.
(for 8.0 release)"
REVISION "201204090403Z"
DESCRIPTION "v4.4.3: Redesigned client-related traps to include
the client's IPv6 link-local address.
The revised traps are:
trpzClientDeAssociationTrap2,
trpzClientRoamingTrap2,
trpzClientIpAddrChangeTrap2,
trpzClientDeAuthenticationTrap2,
trpzClientDynAuthorChangeSuccessTrap2,
trpzClientDisconnectTrap2,
trpzClientClearedTrap3,
trpzClientAuthorizationSuccessTrap5;
and related objects:
trpzClientAuthServerAddrType,
trpzClientAuthServerAddr,
trpzClientDynAuthorClientAddrType,
trpzClientDynAuthorClientAddr,
trpzClientRoamedFromWsAddrType,
trpzClientRoamedFromWsAddr,
trpzClientIpAddrType,
trpzClientIpAddr,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzApRadioIndex,
trpzClientRoamedFromAccessMode,
trpzClientRoamedFromPhysPortNum,
trpzClientRoamedFromApNum,
trpzClientRoamedFromRadioIndex.
They replace the following traps that were obsoleted:
trpzClientDeAssociationTrap,
trpzClientRoamingTrap,
trpzClientIpAddrChangeTrap,
trpzClientDeAuthenticationTrap,
trpzClientDynAuthorChangeSuccessTrap,
trpzClientDisconnectTrap,
trpzClientClearedTrap2,
trpzClientAuthorizationSuccessTrap4;
and related objects:
trpzClientIp,
trpzClientRoamedFromWsIp,
trpzClientRoamedFromAccessType,
trpzClientRoamedFromPortNum,
trpzClientRoamedFromDAPNum,
trpzClientRoamedFromRadioNum.
Added one value (10) to TrpzClientIpAddrChangeReason.
Renamed enum value (1) from 'client-connected' to
'client-connected-ipv4'.
(for 8.0 release)"
REVISION "201203150310Z"
DESCRIPTION "v4.3.0: Added new traps:
trpzAutoTuneSuccessTrap,
trpzAutoTuneFailureTrap;
related TCs:
TrpzRadioBand,
TrpzAutoTuneFailureReason;
and related objects:
trpzRadioBand,
trpzRadiosTunedCount,
trpzAutoTuneFailureReason.
(for 8.0 release)"
REVISION "201110180300Z"
DESCRIPTION "v4.2.0: Added new traps:
trpzM2UConvNotPossibleTrap,
trpzM2UConvAvailabilityRestoredTrap;
related TC:
TrpzM2UConvNotPossibleReason;
and related objects:
trpzM2UMulticastAddrType,
trpzM2UMulticastAddr,
trpzM2UConvNotPossibleReason.
(for 7.7 release)"
REVISION "201101110250Z"
DESCRIPTION "v4.1.0: Added new trap:
trpzRFNoiseSourceTrap
and related objects:
trpzRFNoiseSourceID,
trpzRFNoiseSourceType,
trpzRFNoiseChannel,
trpzRFNoiseRssi,
trpzRFNoiseDutyCycle,
trpzRFNoiseChannelInterferenceMeasure,
trpzRFNoiseAge
(for 7.5 release)"
REVISION "201012210240Z"
DESCRIPTION "v4.0.0: Added new traps for tunnel limit:
trpzApTunnelLimitExceededTrap,
trpzWsTunnelLimitExceededTrap;
related TC:
TrpzWsTunnelLimitType;
and related objects:
trpzApTunnelLimit,
trpzWsTunnelLimit,
trpzWsTunnelLimitType.
(for 7.5 release)"
REVISION "201012210228Z"
DESCRIPTION "v3.9.8: Corrected MAX-ACCESS for 'trpzMultimediaCallRssi':
read-only access was neither intended nor implemented
for this or any other object from the Trap MIB.
This will be published in 7.3 release."
REVISION "200812190227Z"
DESCRIPTION "v3.9.7: Added new trap: trpzMultimediaCallFailureTrap,
related TCs:
TrpzMultimediaCallDirection,
TrpzMultimediaSignalingProtocol,
TrpzMultimediaCallFailureReason,
and related objects:
trpzMultimediaCommunicationServerID,
trpzMultimediaCallDirection,
trpzMultimediaLocalStationIp,
trpzMultimediaLocalStationPort,
trpzMultimediaLocalStationEndpointID,
trpzMultimediaRemoteStationIp,
trpzMultimediaRemoteStationPort,
trpzMultimediaRemoteStationEndpointID,
trpzMultimediaSignalingProtocol,
trpzMultimediaCallBandwidthAndCodec,
trpzMultimediaCallDataRate,
trpzMultimediaCallRssi,
trpzMultimediaCallFailureReason.
(for 7.1 release)"
REVISION "200810300225Z"
DESCRIPTION "v3.9.5: Using the new TC TrpzPhysPortNumberOrZero
instead of ''Unsigned32 (0..1024)''.
This will be published in 7.1 release."
REVISION "200805150215Z"
DESCRIPTION "v3.8.5: Clarified description to reflect the actual use
and avoid future misuse of trpzDeviceSerNum.
Updated description for trpzApName.
Documented the meaning of TrpzClientIpAddrChangeReason
enumeration values.
This will be published in 7.0 release."
REVISION "200805070212Z"
DESCRIPTION "v3.8.2: Added new trap: trpzClusterFailureTrap,
related TC and objects:
TrpzClusterFailureReason,
trpzClusterFailureReason,
trpzClusterFailureDescription
(for 7.0 release)"
REVISION "200804220202Z"
DESCRIPTION "v3.7.2: Added new traps:
trpzRFDetectRogueDeviceTrap2,
trpzRFDetectSuspectDeviceTrap2
and related objects:
trpzRFDetectXmtrRadioType,
trpzRFDetectXmtrCryptoType.
Obsoleted trpzRFDetectRogueDeviceTrap,
trpzRFDetectSuspectDeviceTrap.
(for 7.0 release)"
REVISION "200804100201Z"
DESCRIPTION "v3.7.1: Added new trap: trpzClientAuthorizationSuccessTrap4,
and related object: trpzClientRadioType.
Obsoletes trpzClientAuthorizationSuccessTrap,
trpzClientAuthorizationSuccessTrap2,
trpzClientAuthorizationSuccessTrap3.
(for 7.0 release)"
REVISION "200804080158Z"
DESCRIPTION "v3.6.8: Obsoleted two traps:
trpzRFDetectSpoofedMacAPTrap,
trpzRFDetectSpoofedSsidAPTrap.
(for 7.0 release)"
REVISION "200802180157Z"
DESCRIPTION "v3.6.7: Redesigned the AP Operational - Radio Status trap
to support 11n-capable APs.
Added varbindings:
trpzRadioChannelWidth,
trpzRadioMimoState.
The new trap is trpzApOperRadioStatusTrap3.
(for 7.0 release)"
REVISION "200712030153Z"
DESCRIPTION "v3.6.3: Obsoleted one object: trpzApPortOrDapNum
(previously deprecated).
This will be published in 7.0 release."
REVISION "200711150152Z"
DESCRIPTION "v3.6.2: Added three new traps:
trpzApManagerChangeTrap,
trpzClientClearedTrap2,
trpzMobilityDomainResiliencyStatusTrap,
related TCs and objects:
TrpzApMgrChangeReason,
trpzApMgrChangeReason,
trpzApMgrOldIp,
trpzApMgrNewIp,
trpzClientSessionElapsedSeconds,
TrpzClientClearedReason,
trpzClientClearedReason,
TrpzMobilityDomainResiliencyStatus,
trpzMobilityDomainResiliencyStatus.
Obsoleted one trap:
trpzClientClearedTrap,
and related object:
trpzClientSessionElapsedTime.
(for 7.0 release)"
REVISION "200711010145Z"
DESCRIPTION "v3.5.5: Added new trap: trpzClientAuthorizationSuccessTrap3,
related TC and objects:
TrpzClientAuthorizationReason
trpzClientAuthorizationReason,
trpzClientAccessMode,
trpzPhysPortNum.
Obsoletes trpzClientAuthorizationSuccessTrap,
trpzClientAuthorizationSuccessTrap2.
(for 6.2 release)"
REVISION "200710010141Z"
DESCRIPTION "v3.5.1: Cleaned up object (trpzAPAccessType).
Marked it as obsolete, because instrumentation code
for traps using it was removed long time ago.
(This will be published in 6.2 release.)"
REVISION "200708310140Z"
DESCRIPTION "v3.5.0: Corrected trpzClientMACAddress2 SYNTAX:
its value was always a MacAddress, not an arbitrary
'OCTET STRING (SIZE (6))'. There is no change on the wire,
just a more appropriate DISPLAY-HINT."
REVISION "200708240122Z"
DESCRIPTION "v3.3.2: Added new trap: trpzMichaelMICFailure,
related TC and object:
TrpzMichaelMICFailureCause,
trpzMichaelMICFailureCause.
Obsoletes trpzMpMichaelMICFailure,
trpzMpMichaelMICFailure2.
(for 6.2 release)"
REVISION "200707060110Z"
DESCRIPTION "v3.2.0: Redesigned the AP Status traps.
- Replaced trpzApAttachType and trpzApPortOrDapNum
with a single varbinding, trpzApNum.
- Added varbinding trpzRadioMode
to the AP Operational - Radio Status trap.
The new traps are
trpzApNonOperStatusTrap2,
trpzApOperRadioStatusTrap2.
(for 6.2 release)"
REVISION "200706050107Z"
DESCRIPTION "v3.1.2: Obsoleted one trap: trpzRFDetectUnAuthorizedAPTrap
(for 6.2 release)"
REVISION "200705170106Z"
DESCRIPTION "v3.1.1: Added new trap: trpzConfigurationSavedTrap
and related objects:
trpzConfigSaveFileName,
trpzConfigSaveInitiatorType,
trpzConfigSaveInitiatorIp,
trpzConfigSaveInitiatorDetails,
trpzConfigSaveGeneration.
(for 6.2 release)"
REVISION "200705040103Z"
DESCRIPTION "v3.0.1: added one value (3)
to TrpzClientIpAddrChangeReason"
REVISION "200704190100Z"
DESCRIPTION "v3.0.0: Added six new traps:
trpzRFDetectRogueDeviceTrap,
trpzRFDetectRogueDeviceDisappearTrap,
trpzRFDetectSuspectDeviceTrap,
trpzRFDetectSuspectDeviceDisappearTrap,
trpzRFDetectClientViaRogueWiredAPTrap3,
trpzRFDetectClassificationChangeTrap
and related object:
trpzRFDetectClassificationReason.
Obsoleted seven traps:
trpzRFDetectRogueAPTrap,
trpzRFDetectRogueDisappearTrap,
trpzRFDetectInterferingRogueAPTrap,
trpzRFDetectInterferingRogueDisappearTrap,
trpzRFDetectUnAuthorizedSsidTrap,
trpzRFDetectUnAuthorizedOuiTrap,
trpzRFDetectClientViaRogueWiredAPTrap2.
(for 6.2 release)"
REVISION "200703270054Z"
DESCRIPTION "v2.9.2: added three values (13, 14, 15)
to TrpzAuthorizationFailureType
(for 6.2 release)"
REVISION "200702150053Z"
DESCRIPTION "v2.9.1: Cleaned up trap (trpzClientAuthorizationSuccessTrap)
and object (trpzRadioRssi) deprecated long time ago.
Marked them as obsolete, because instrumentation code
was removed already.
(This will be published in 6.2 release.)"
REVISION "200701090052Z"
DESCRIPTION "v2.9.0: Added two textual conventions:
TrpzUserAttributeList,
TrpzSessionDisconnectType
three new traps:
trpzClientDynAuthorChangeSuccessTrap,
trpzClientDynAuthorChangeFailureTrap,
trpzClientDisconnectTrap
and related objects:
trpzClientDynAuthorClientIp,
trpzChangedUserParamOldValues,
trpzChangedUserParamNewValues,
trpzClientDisconnectSource,
trpzClientDisconnectDescription
(for 6.2 release)"
REVISION "200701090051Z"
DESCRIPTION "v2.8.5: added one value (24)
to TrpzRFDetectDoSType
(for 6.2 release)"
REVISION "200701090050Z"
DESCRIPTION "v2.6.4: Added two new traps:
trpzMobilityDomainFailOverTrap,
trpzMobilityDomainFailBackTrap
and related objects:
trpzMobilityDomainSecondarySeedIp,
trpzMobilityDomainPrimarySeedIp
(for 6.0 release)"
REVISION "200609280045Z"
DESCRIPTION "v2.6.2: Factored out four textual conventions
into a new module, Client Session TC:
TrpzClientSessionState,
TrpzClientAuthenProtocolType,
TrpzClientDot1xState,
TrpzUserAccessType
and imported them from there."
REVISION "200608080042Z"
DESCRIPTION "v2.5.2: Added new trap: trpzApRejectLicenseExceededTrap
and related object: trpzNumLicensedActiveAPs
(for 6.0 release)"
REVISION "200607310040Z"
DESCRIPTION "v2.5.0: Added new trap:
trpzRFDetectAdhocUserDisappearTrap
(for 6.0 release)"
REVISION "200607280032Z"
DESCRIPTION "v2.4.7: Removed unused imports"
REVISION "200607230029Z"
DESCRIPTION "v2.4.1: Added new trap: trpzRFDetectBlacklistedTrap,
related textual convention: TrpzBlacklistingCause
and objects: trpzBlacklistingRemainingTime,
trpzBlacklistingCause
(for 6.0 release)"
REVISION "200607120028Z"
DESCRIPTION "v2.4.0: Added new trap: RFDetectClientViaRogueWiredAPTrap2
and related object: trpzRFDetectRogueAPMacAddr.
This trap obsoletes the RFDetectClientViaRogueWiredAPTrap
(for 6.0 release)"
REVISION "200607070026Z"
DESCRIPTION "v2.3.1: Added 3 new traps:
trpzClientAssociationSuccessTrap,
trpzClientAuthenticationSuccessTrap,
trpzClientDeAuthenticationTrap
(for 6.0 release)"
REVISION "200607070025Z"
DESCRIPTION "v2.3.0: Added new trap: trpzClientIpAddrChangeTrap
and related object: TrpzClientIpAddrChangeReason
(for 6.0 release)"
REVISION "200607060023Z"
DESCRIPTION "v2.2.0: added two values (13, 14)
to TrpzAuthenticationFailureType
(for 6.0 release)"
REVISION "200604190022Z"
DESCRIPTION "v2.1.6: Updated client connection failure causes and descriptions
(for 5.0 release)"
REVISION "200604190021Z"
DESCRIPTION "v2.0.6: Revised for 4.1 release"
REVISION "200501010000Z"
DESCRIPTION "v1: initial version, as for 4.0 and older releases"
::= { trpzMibs 1 }
-- Branch for notifications
trpzTrapsV2 OBJECT IDENTIFIER ::= { trpzTraps 0 }
-- Textual Conventions
TrpzAssociationFailureType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons for an AP to fail a
client's 802.11 association"
SYNTAX INTEGER {
other (1),
load-balance (2),
quiet-period (3),
dot1x (4),
no-prev-assoc (5),
glare (6),
cipher-rejected (7),
cipher-mismatch (8),
wep-not-configured (9),
bad-assoc-request (10),
out-of-memory (11),
tkip-cm-active (12),
roam-in-progress (13)
}
TrpzAuthenticationFailureType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons for AAA authentication to fail
user-glob-mismatch - auth rule/user not found for console login
user-does-not-exist - login failed because user not found
invalid-password - login failed because of invalid password
server-timeout - unable to contact a AAA server
signature-failed - incorrect password for mschapv2
local-certificate-error - certificate error
all-servers-down - unable to contact any AAA server in the group
authentication-type-mismatch - client and switch are using different
authentication methods
server-rejected - received reject from AAA server
fallthru-auth-misconfig - problem with fallthru authentication
no-lastresort-auth - problem with last-resort authentication
exceeded-max-attempts - local user failed to login within allowed number
of attempts resulting in account lockout
password-expired - user's password expired"
SYNTAX INTEGER {
other (1),
user-glob-mismatch (2),
user-does-not-exist (3),
invalid-password (4),
server-timeout (5),
signature-failed (6),
local-certificate-error (7),
all-servers-down (8),
authentication-type-mismatch (9),
server-rejected (10),
fallthru-auth-misconfig (11),
no-lastresort-auth (12),
exceeded-max-attempts (13),
password-expired (14)
}
TrpzAuthorizationFailureType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons for AAA authorization failure"
SYNTAX INTEGER {
other (1),
user-param (2),
location-policy (3),
vlan-tunnel-failure (4),
ssid-mismatch (5),
acl-mismatch (6),
timeofday-mismatch (7),
crypto-type-mismatch(8),
mobility-profile-mismatch(9),
start-date-mismatch (10),
end-date-mismatch (11),
svr-type-mismatch (12),
ssid-defaults (13),
qos-profile-mismatch (14),
simultaneous-logins (15)
}
TrpzDot1xFailureType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the dot1x failure reasons.
quiet-period occurs when client is denied access for a period of
time after a failed connection attempt
administrative-kill means that the session was cleared using the
'clear dot1x client' command
bad-rsnie means that client sent an invalid IE
timeout is when there are excessive retransmissions
max-sessions-exceeded means the maximum allowed wired clients
has been exceeded on the switch
fourway-hs-failure is for failures occuring the 4-way key handshake
user-glob-mismatch means the name received in the dot1x identity
request does not match any configured userglobs
in the system
reauth-disabled means that the client is trying to reauthenticate
but reauthentication is disabled
gkhs-failure means that either there was no response from the client
during the GKHS or the response did not have an IE
force-unauth-configured means that the client is trying to connect
through a port which is configured as
force-unauth
cert-not-installed means that there is no certificate installed on
the switch"
SYNTAX INTEGER {
other (1),
quiet-period (2),
administrative-kill (3),
bad-rsnie (4),
timeout (5),
max-sessions-exceeded(6),
fourway-hs-failure (7),
user-glob-mismatch (8),
bonded-auth-failure (9),
reauth-disabled (10),
gkhs-failure (11),
force-unauth-configured (12),
cert-not-installed (13)
}
TrpzRFDetectDoSType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The types of denial of service (DoS) attacks"
SYNTAX INTEGER {
probe-flood(1),
auth-flood(2),
null-data-flood(3),
mgmt-6-flood(4),
mgmt-7-flood(5),
mgmt-d-flood(6),
mgmt-e-flood(7),
mgmt-f-flood(8),
fakeap-ssid(9),
fakeap-bssid(10),
bcast-deauth(11),
null-probe-resp(12),
disassoc-spoof(13),
deauth-spoof(14),
decrypt-err(15),
weak-wep-iv(16),
wireless-bridge(17),
netstumbler(18),
wellenreiter(19),
adhoc-client-frame(20),
associate-pkt-flood(21),
re-associate-pkt-flood(22),
de-associate-pkt-flood(23),
bssid-spoof(24)
}
TrpzClientIpAddrChangeReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the reasons for client IP address changes:
client-connected-ipv4: an IPv4 address was assigned
on the initial connection of an IPv4 client,
or when an IPv6 client activated the IPv4 stack;
other: IPv4 address changed after initial connection;
dhcp-to-static: erroneous condition where
client IPv4 address is changed to a static address
while the dhcp-restrict option is enabled;
ipv6-global-addr: a new IPv6 global address was assigned
to the client."
SYNTAX INTEGER {
client-connected-ipv4(1),
other(2),
dhcp-to-static(3),
ipv6-global-addr(10)
}
TrpzBlacklistingCause ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of reasons for blacklisting a transmitter:
bl-configured: administrative action
(explicitly added to the Black List),
bl-associate-pkt-flood: Association request flood detected,
bl-re-associate-pkt-flood: Re-association request flood detected,
bl-de-associate-pkt-flood: De-association request flood detected.
(The leading 'bl-' stands for 'Black-Listed';
reading it as 'Blocked' would also make sense)."
SYNTAX INTEGER {
bl-configured(1),
bl-associate-pkt-flood(2),
bl-re-associate-pkt-flood(3),
bl-de-associate-pkt-flood(4)
}
TrpzUserAttributeList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Display string listing AAA attributes and their values.
These strings can be used, for example,
in change of authorization notifications.
The syntax is:
attribute_name1=value1, attribute_name2=value2, ...
where attribute_name can be one of the following:
vlan-name,
in-acl,
out-acl,
mobility-prof,
time-of-day,
end-date,
sess-timeout,
acct-interval,
service-type.
Example:
vlan-name=red, in-acl=in_acl_1"
SYNTAX DisplayString (SIZE (0..2048))
TrpzSessionDisconnectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the sources that can initiate
the termination of a session:
admin-disconnect:
session terminated by administrative action
(from console, telnet session, WebView, or RingMaster).
dyn-auth-disconnect:
session terminated by dynamic authorization client;
description will have the IP address of
the dynamic authorization client which sent the request."
SYNTAX INTEGER {
other (1),
admin-disconnect (2),
dyn-auth-disconnect (3)
}
TrpzConfigSaveInitiatorType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the sources that can initiate
a configuration save:
cli-console:
configuration save requested from
serial console administrative session.
cli-remote:
configuration save requested from
telnet or ssh administrative session.
https:
configuration save requested via
HTTPS API (RingMaster or WebView).
snmp-set:
configuration saved as a result of
performing a SNMP SET operation."
SYNTAX INTEGER {
other (1),
cli-console (2),
cli-remote (3),
https (4),
snmp-set (5)
}
TrpzMichaelMICFailureCause ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Describes the cause/source of Michael MIC Failure detection."
SYNTAX INTEGER {
detected-by-ap (1),
detected-by-client (2)
}
TrpzClientAuthorizationReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons for AAA authorization."
SYNTAX INTEGER {
other (1),
new-client (2),
re-auth (3),
roam (4)
}
TrpzApMgrChangeReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons why AP is switching
to its secondary link:
failover:
AP's primary link failed.
load-balancing:
AP's primary link is overloaded."
SYNTAX INTEGER {
other (1),
failover (2),
load-balancing (3)
}
TrpzClientClearedReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons for clearing a session:
normal:
Session was cleared from the switch as the last
step in the normal session termination process.
backup-failure:
The backup switch could not activate a session
from a failed MX."
SYNTAX INTEGER {
other (1),
normal (2),
backup-failure (3)
}
TrpzMobilityDomainResiliencyStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the current resilient capacity status
for a mobility domain:
resilient:
Every AP in the mobility domain has a secondary backup
link. If the primary switch of an AP failed, the AP
and its sessions would fail over to its backup link.
degraded:
Some APs only have a primary link. If the primary
switch of an AP without a backup link failed, the AP
would reboot and its sessions would be lost."
SYNTAX INTEGER {
other (1),
resilient (2),
degraded (3)
}
TrpzClusterFailureReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons why the AC goes into
cluster failure state:
validation-error:
Cluster configuration rejected due to validation error."
SYNTAX INTEGER {
other (1),
validation-error (2)
}
TrpzMultimediaSignalingProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Multimedia Signaling Protocols:
protocols for creating, modifying, terminating sessions.
The first signaling protocol supported is:
sip = Session Initiation Protocol."
SYNTAX INTEGER {
other (1),
sip (2)
}
TrpzMultimediaCallFailureReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons why a multimedia call fails."
SYNTAX INTEGER {
other (1),
resource-unavailable (2)
}
TrpzMultimediaCallDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the multimedia call direction."
SYNTAX INTEGER {
incoming (1),
outgoing (2)
}
TrpzWsTunnelLimitType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the type of limit exceeded
that caused the AC (wireless switch)
to reject a tunnel creation request.
The value 'platform-tunnel-limit' (2) corresponds to
the maximum tunnel capacity of a switch,
which depends on the platform.
Some of the available tunnel capacity for each switch
is reserved for switch-to-switch tunnels.
The remaining tunnel capacity is used for AP-to-switch tunnels.
The switch-to-switch tunnel reservations can increase or decrease
depending on factors such as:
- the current number of members in the mobility domain,
- the current number of members in the network domain,
- network resiliency status.
The value 'ap-ws-tunnel-limit' (3) corresponds to
the available number of AP-to-switch tunnels,
which depends on the current situation of the switch."
SYNTAX INTEGER {
other (1),
platform-tunnel-limit (2),
ap-ws-tunnel-limit (3)
}
TrpzM2UConvNotPossibleReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons why multicast to unicast conversion
cannot be performed.
max-conv-limit:
The number of required conversions is higher than
the defined limit."
SYNTAX INTEGER {
other (1),
max-conv-limit (2)
}
TrpzRadioBand ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the 802.11 radio bands.
802.11 a/n use the 5 GHz band.
802.11 b/g/n use the 2.4 GHz band."
SYNTAX INTEGER {
bandAN (1),
bandBGN (2)
}
TrpzAutoTuneFailureReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons why an auto-tune operation failed:
ap-conn-lost:
The connection with an AP involved in the auto-tune process
was lost.
ws-conn-lost:
The connection with a wireless switch involved in
the auto-tune process was lost."
SYNTAX INTEGER {
other (1),
ap-conn-lost (2),
ws-conn-lost (3)
}
TrpzClientDeviceProfileChangeReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the reasons for device profile changes.
aaa-policy:
The device profile has changed due to an AAA policy,
after authentication.
device-type-changed:
The device type has changed."
SYNTAX INTEGER {
other (1),
aaa-policy (2),
device-type-changed (3)
}
-- Object definitions
trpzDeviceId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Enumeration of devices as indicated in registration MIB.
This object is used within notifications and is not accessible."
::= { trpzTemporary 1 }
trpzMobilityDomainIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"IP address of the other switch which the send switch is
reporting on. This object is used
within notifications and is not accessible."
::= { trpzTemporary 2 }
trpzAPMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"MAC address of the AP of interest. This object is used
within notifications and is not accessible."
::= { trpzTemporary 3 }
trpzClientMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"MAC address of the client of interest. This object is used
within notifications and is not accessible."
::= { trpzTemporary 4 }
trpzRFDetectXmtrMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Describes the transmitter's MAC address. This object is used
within notifications and is not accessible."
::= { trpzTemporary 5 }
trpzPortNum OBJECT-TYPE
SYNTAX INTEGER (1..22)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Port number on the AC which reported this rogue during a detection
sweep. This object is used within notifications and
is not accessible."
::= { trpzTemporary 6 }
trpzAPRadioNum OBJECT-TYPE
SYNTAX TrpzRadioNum
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Radio number of the AP which reported this rogue during a detection
sweep. This object is used within notifications and is not accessible."
::= { trpzTemporary 7 }
trpzRadioRssi OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The received signal strength as measured by the AP radio which reported
this rogue during a detection sweep. This object is used
within notifications and is not accessible.
Not used by any notification."
::= { trpzTemporary 8 }
trpzRadioBSSID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The basic service set identifier of the rogue from the beacon frame
reported by the AP during a detection sweep. This object is used
within notifications and is not accessible."
::= { trpzTemporary 9 }
trpzUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client user name as learned from the AAA process. This object
is used within notifications and is not accessible."
::= { trpzTemporary 10 }
trpzClientAuthServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client authentication server ip address. This object is used
within notifications and is not accessible."
::= { trpzTemporary 11 }
trpzClientSessionState OBJECT-TYPE
SYNTAX TrpzClientSessionState
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The state for a client session. This object is used
within notifications and is not accessible."
::= { trpzTemporary 12 }
trpzDAPNum OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The DAP number on the wireless switch. This object is used
within notifications and is not accessible."
::= { trpzTemporary 13 }
trpzClientIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The client ip address. This object is used
within notifications and is not accessible."
::= { trpzTemporary 14 }
trpzClientSessionId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The unique global id for a client session. This object is used
within notifications and is not accessible."
::= { trpzTemporary 15 }
trpzClientAuthenProtocolType OBJECT-TYPE
SYNTAX TrpzClientAuthenProtocolType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The authentication protocol for a client.
This object is used within notifications and is not accessible."
::= { trpzTemporary 16 }
trpzClientVLANName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The vlan name a client is on. This object is used within
notifications and is not accessible."
::= { trpzTemporary 17 }
trpzClientSessionStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The start time of a client session, relative to the sysUptime.
This object is used within notifications and is not accessible.
Obsolete. Do not use it because it's not vital information and
often *cannot* be implemented to match the declared semantics:
a client session might have been created on another wireless switch,
*before* the current switch booted (the local zero of sysUptime)."
::= { trpzTemporary 18 }
trpzClientFailureCause OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Display string for possible failure cause for a client session.
This object is used within notifications and is not accessible."
::= { trpzTemporary 19 }
trpzClientRoamedFromPortNum OBJECT-TYPE
SYNTAX INTEGER (1..20)
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The port number on the AC a client has roamed from.
This object is used within notifications and is not accessible.
Obsoleted by 'trpzClientRoamedFromPhysPortNum'."
::= { trpzTemporary 20 }
trpzClientRoamedFromRadioNum OBJECT-TYPE
SYNTAX TrpzRadioNum
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The radio number of the AP the client is roamed from. This object is
used within notifications and is not accessible.
Obsoleted by 'trpzClientRoamedFromRadioIndex'."
::= { trpzTemporary 21 }
trpzClientRoamedFromDAPNum OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The DAP number on the AC which reported this rogue during roam.
This object is used within notifications and is not accessible.
Obsoleted by 'trpzClientRoamedFromApNum'."
::= { trpzTemporary 22 }
trpzUserParams OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A display string of User Parameters for client user authorization
attributes learned through AAA and/or used by the system. Note
that the syntax will be (name=value, name=value,..) for the
parsing purpose. This object is used within notifications and
is not accessible."
::= { trpzTemporary 23 }
trpzClientLocationPolicyIndex OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Index of the Location Policy rule applied to a user.
This object is used within notifications and is not accessible."
::= { trpzTemporary 24 }
trpzClientAssociationFailureCause OBJECT-TYPE
SYNTAX TrpzAssociationFailureType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client association failure cause.
This object is used within notifications and is not accessible."
::= { trpzTemporary 25 }
trpzClientAuthenticationFailureCause OBJECT-TYPE
SYNTAX TrpzAuthenticationFailureType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client authentication failure cause.
This object is used within notifications and is not accessible."
::= { trpzTemporary 26 }
trpzClientAuthorizationFailureCause OBJECT-TYPE
SYNTAX TrpzAuthorizationFailureType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client authorization failure cause. Note that if it is
the user-param, we would additionally expect the failure cause
description to list the user attribute value that caused the
failure. This object is used within notifications and is
not accessible."
::= { trpzTemporary 27 }
trpzClientFailureCauseDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Display string for describing the client failure cause.
This object is used within notifications and is not accessible."
::= { trpzTemporary 28 }
trpzClientRoamedFromWsIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The system IP address of the AC (wireless switch) a client roamed from.
This object is used within notifications and is not accessible."
::= { trpzTemporary 29 }
trpzClientRoamedFromAccessType OBJECT-TYPE
SYNTAX TrpzAccessType
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The client access type (ap, dap, wired) that a client roamed from.
This object is used within notifications and is not accessible.
Obsoleted by 'trpzClientRoamedFromAccessMode'."
::= { trpzTemporary 30 }
trpzClientAccessType OBJECT-TYPE
SYNTAX TrpzAccessType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client access type (ap, dap, wired).
This object is used within notifications and is not accessible.
For new traps, use trpzClientAccessMode instead of this object."
::= { trpzTemporary 31 }
trpzRadioMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"AP Radio MAC address.
This object is used within notifications and is not accessible."
::= { trpzTemporary 32 }
trpzRadioPowerChangeReason OBJECT-TYPE
SYNTAX TrpzRadioPowerChangeType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of event that caused an AP radio power change; occurs due
to auto-tune operation.
This object is used within notifications and is not accessible."
::= { trpzTemporary 33 }
trpzNewChannelNum OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"New channel number of the AP radio used after an auto tune event.
This object is used within notifications and is not accessible."
::= { trpzTemporary 34 }
trpzOldChannelNum OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Old channel number of the AP radio used before an auto tune event.
This object is used within notifications and is not accessible."
::= { trpzTemporary 35 }
trpzChannelChangeReason OBJECT-TYPE
SYNTAX TrpzChannelChangeType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of event that caused an AP radio channel change; occurs due
to auto-tune operation.
This object is used within notifications and is not accessible."
::= { trpzTemporary 36 }
trpzRFDetectListenerListInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..571))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The RF Detection Listener list info including a list of
(listener mac, rssi, channel, ssid, time).
There will be a maximum of 6 entries in the list.
Formats:
MAC: 18 bytes: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X
RSSI: 10 bytes: %10d
CHANNEL: 3 bytes: %3d
SSID: 32 bytes: %s
TIME: 26 bytes: %s
Maximum size per entry is 89+4+2 = 95 bytes.
Maximum size of the string is 6*95= 571 bytes (include NULL).
This object is used within notifications and is not accessible."
::= { trpzTemporary 37 }
trpzRadioSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The radio SSID string
This object is used within notifications and is not accessible."
::= { trpzTemporary 38 }
trpzNewPowerLevel OBJECT-TYPE
SYNTAX TrpzPowerLevel
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"New power level of the AP radio used after an auto tune event.
This object is used within notifications and is not accessible."
::= { trpzTemporary 39 }
trpzOldPowerLevel OBJECT-TYPE
SYNTAX TrpzPowerLevel
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Old power level of the AP radio used before an auto tune event.
This object is used within notifications and is not accessible."
::= { trpzTemporary 40 }
trpzRadioPowerChangeDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The radio power change description. In the case of reason being
dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2),
clientMacAddress will be included in the description.
This object is used within notifications and is not accessible."
::= { trpzTemporary 41 }
trpzCounterMeasurePerformerListInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"A list of information for APs performing Counter Measures including
a list of performer mac addresses. This object is used within
notifications and is not accessible.
Not used by any notification."
::= { trpzTemporary 42 }
trpzClientDot1xState OBJECT-TYPE
SYNTAX TrpzClientDot1xState
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The state for a client 802.1X.
This object is used within notifications and is not accessible."
::= { trpzTemporary 43 }
trpzClientDot1xFailureCause OBJECT-TYPE
SYNTAX TrpzDot1xFailureType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client 802.1X failure cause.
This object is used within notifications and is not accessible."
::= { trpzTemporary 44 }
trpzAPAccessType OBJECT-TYPE
SYNTAX TrpzAccessType
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The access point access type (ap, dap,).
This object is used within notifications and is not accessible.
Not used by any notification."
::= { trpzTemporary 45 }
trpzUserAccessType OBJECT-TYPE
SYNTAX TrpzUserAccessType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The user access type (MAC, WEB, DOT1X, LAST-RESORT).
This object is used within notifications and is not accessible."
::= { trpzTemporary 46}
trpzClientSessionElapsedTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The elapsed time for a client session.
Obsoleted because session time is usually reported in seconds.
This object is used within notifications and is not accessible."
::= { trpzTemporary 47 }
trpzLocalId OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Local Id for the session.
This object is used within notifications and is not accessible."
::= { trpzTemporary 48 }
trpzRFDetectDoSType OBJECT-TYPE
SYNTAX TrpzRFDetectDoSType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of denial of service (DoS) attack.
This object is used within notifications and is not accessible."
::= { trpzTemporary 49 }
trpzSourceWsIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"IP address of another AC (wireless switch).
This object is used within notifications and is not accessible."
::= { trpzTemporary 50 }
trpzClientVLANid OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VLAN ID used by client traffic.
This object is used within notifications and is not accessible."
::= { trpzTemporary 51 }
trpzClientVLANtag OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"VLAN tag used by client traffic.
This object is used within notifications and is not accessible."
::= { trpzTemporary 52 }
trpzDeviceModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The model of a device in printable US-ASCII. If unknown
(or not available), then the value is a zero length string.
This object is used within notifications and is not accessible."
::= { trpzTemporary 53 }
--
-- Notes for MIB designers/maintainers:
--
-- Define a new object type for each kind of device (other than AP)
-- if your new traps need to identify such devices by serial number.
-- Use 'trpzDeviceSerNum' only to identify APs!
--
trpzDeviceSerNum OBJECT-TYPE
SYNTAX TrpzApSerialNum
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The serial number of an AP in printable US-ASCII.
If unknown (or not available), then the value is a zero length string.
Should NOT be used to identify other devices, for example an AC
(wireless switch).
This object is used within notifications and is not accessible."
::= { trpzTemporary 54 }
trpzRsaPubKeyFingerPrint OBJECT-TYPE
SYNTAX TrpzApFingerprint
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The hash of the RSA public key (of a key pair) in binary form
that uniquely identifies the public key of an AP.
This object is used within notifications and is not accessible."
::= { trpzTemporary 55 }
trpzDAPconnectWarningType OBJECT-TYPE
SYNTAX INTEGER {
not-configured-fingerprint-connect(1),
secure-handshake-failure(2),
not-configured-fingerprint-required(3),
fingerprint-mismatch(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of DAP connect warning. The values are:
not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair
but did not have its fingerprint configured on the AC, has connected
to the AC when 'dap security' set to 'OPTIONAL'
secure-handshake-failure(2).............a DAP tried to connect to the
AC with security, but the handshake failed
not-configured-fingerprint-required(3)..a DAP tried to connect to the
AC with security, but 'dap security' set to 'REQUIRED',
and no fingerprint was configured for the DAP
fingerprint-mismatch(4).................a DAP tried to connect to the
AC with security and its fingerprint was configured, but
the fingerprint did not match the computed one
This object is used within notifications and is not accessible."
::= { trpzTemporary 56 }
trpzClientMACAddress2 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"MAC address of the second client of interest. This object
is used within notifications and is not accessible."
::= { trpzTemporary 57 }
trpzApAttachType OBJECT-TYPE
SYNTAX TrpzApAttachType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"How the AP is attached to the AC
(directly or via L2/L3 network).
This object is used within notifications and is not accessible."
::= { trpzTemporary 58 }
trpzApPortOrDapNum OBJECT-TYPE
SYNTAX TrpzApPortOrDapNum
MAX-ACCESS accessible-for-notify
STATUS obsolete
DESCRIPTION
"The Port Number if the AP is directly attached,
or the CLI-assigned DAP Number if attached via L2/L3 network.
This object is used within notifications and is not accessible.
Obsoleted by trpzApNum.
(In 6.0, direct- and network-attached APs were unified.)"
::= { trpzTemporary 59 }
trpzApName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of the AP, as assigned in AC's CLI;
defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444');
could have been changed from CLI to a meaningful name,
for example the location of the AP (example: 'MeetingRoom73').
This object is used within notifications and is not accessible."
::= { trpzTemporary 60 }
trpzApTransition OBJECT-TYPE
SYNTAX TrpzApTransition
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"AP state Transition, as seen by the AC.
This object is used within notifications and is not accessible."
::= { trpzTemporary 61 }
trpzApFailDetail OBJECT-TYPE
SYNTAX TrpzApFailDetail
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Detailed failure code for some of the transitions
specified in 'trpzApTransition' object.
This object is used within notifications and is not accessible."
::= { trpzTemporary 62 }
trpzRadioType OBJECT-TYPE
SYNTAX TrpzRadioType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the AP Radio Type, as seen by AC.
This object is used within notifications and is not accessible."
::= { trpzTemporary 63 }
trpzRadioConfigState OBJECT-TYPE
SYNTAX TrpzRadioConfigState
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the Radio State, as seen by the AC.
This object is used within notifications and is not accessible."
::= { trpzTemporary 64 }
trpzApConnectSecurityType OBJECT-TYPE
SYNTAX TrpzApConnectSecurityType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the security level of the connection between AP and AC.
This object is used within notifications and is not accessible."
::= { trpzTemporary 65 }
trpzApServiceAvailability OBJECT-TYPE
SYNTAX TrpzApServiceAvailability
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the level of wireless service availability.
This object is used within notifications and is not accessible."
::= { trpzTemporary 66 }
trpzApWasOperational OBJECT-TYPE
SYNTAX TrpzApWasOperational
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates whether the AP was operational
before a transition occurred.
This object is used within notifications and is not accessible."
::= { trpzTemporary 67 }
trpzClientTimeSinceLastRoam OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The time in seconds since the most recent roam of a given client.
This object is used within notifications and is not accessible."
::= { trpzTemporary 68 }
trpzClientIpAddrChangeReason OBJECT-TYPE
SYNTAX TrpzClientIpAddrChangeReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why client IP address changed.
This object is used within notifications and is not accessible."
::= { trpzTemporary 69 }
trpzRFDetectRogueAPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Describes the MAC address of the Rogue AP the transmitter is connected to.
This object is used within notifications and is not accessible."
::= { trpzTemporary 70 }
trpzBlacklistingRemainingTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The time in seconds remaining until a given transmitter could be
removed from the Black List.
This object is used within notifications and is not accessible."
::= { trpzTemporary 71 }
trpzBlacklistingCause OBJECT-TYPE
SYNTAX TrpzBlacklistingCause
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why a given transmitter is blacklisted.
This object is used within notifications and is not accessible."
::= { trpzTemporary 72 }
trpzNumLicensedActiveAPs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the maximum (licensed) number of active APs for this AC.
This object is used within notifications and is not accessible."
::= { trpzTemporary 73 }
trpzClientDynAuthorClientIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The dynamic authorization client IP address which caused
the change of authorization.
This object is used within notifications and is not accessible."
::= { trpzTemporary 74 }
trpzChangedUserParamOldValues OBJECT-TYPE
SYNTAX TrpzUserAttributeList
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A display string listing the changed AAA attributes and
their values, before the change of authorization was executed.
This object is used within notifications and is not accessible."
::= { trpzTemporary 75 }
trpzChangedUserParamNewValues OBJECT-TYPE
SYNTAX TrpzUserAttributeList
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A display string listing the changed AAA attributes and
their values, after the change of authorization was executed.
This object is used within notifications and is not accessible."
::= { trpzTemporary 76 }
trpzClientDisconnectSource OBJECT-TYPE
SYNTAX TrpzSessionDisconnectType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The external source that initiated the termination of a session.
This object is used within notifications and is not accessible."
::= { trpzTemporary 77 }
trpzClientDisconnectDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Display string for providing available information related to
the external source that initiated a session termination.
This object is used within notifications and is not accessible."
::= { trpzTemporary 78 }
trpzMobilityDomainSecondarySeedIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The secondary seed IP address to which the Mobility Domain
has failed over.
This object is used within notifications and is not accessible."
::= { trpzTemporary 79 }
trpzMobilityDomainPrimarySeedIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The primary seed IP address to which the Mobility Domain
has failed back.
This object is used within notifications and is not accessible."
::= { trpzTemporary 80 }
trpzRFDetectClassificationReason OBJECT-TYPE
SYNTAX TrpzRFDetectClassificationReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why a RF device is classified
the way it is.
This object is used within notifications and is not accessible."
::= { trpzTemporary 81 }
trpzConfigSaveFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Display string listing the name of the file
to which the running configuration was saved.
This object is used within notifications and is not accessible."
::= { trpzTemporary 82 }
trpzConfigSaveInitiatorType OBJECT-TYPE
SYNTAX TrpzConfigSaveInitiatorType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the source that initiated a configuration save.
This object is used within notifications and is not accessible."
::= { trpzTemporary 83 }
trpzConfigSaveInitiatorIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IP address of the source that initiated a configuration save.
This object is used within notifications and is not accessible."
::= { trpzTemporary 84 }
trpzConfigSaveInitiatorDetails OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Display string listing additional information regarding
the source that initiated a configuration save, when available.
This object is used within notifications and is not accessible."
::= { trpzTemporary 85 }
trpzConfigSaveGeneration OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the number of configuration changes
since the last system boot.
The generation count is used to track the number of times
the running configuration has been changed due to
administrative actions (set/clear), SNMP requests (SET),
XML requests (e.g. RingMaster).
This object is used within notifications and is not accessible."
::= { trpzTemporary 86 }
trpzApNum OBJECT-TYPE
SYNTAX TrpzApNum
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The administratively assigned AP Number,
unique on same AC (switch),
regardless of how APs are attached to the AC.
This object is used within notifications and is not accessible.
Obsoletes trpzApPortOrDapNum.
For clarity, use this object to identify an AP
since in 6.0 directly attached APs and DAPs were unified."
::= { trpzTemporary 87 }
trpzRadioMode OBJECT-TYPE
SYNTAX TrpzRadioMode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the administratively controlled Radio Mode
(enabled/disabled/sentry).
This object is used within notifications and is not accessible."
::= { trpzTemporary 88 }
trpzMichaelMICFailureCause OBJECT-TYPE
SYNTAX TrpzMichaelMICFailureCause
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the Michael MIC Failure cause / who detected it.
This object is used within notifications and is not accessible."
::= { trpzTemporary 89 }
trpzClientAccessMode OBJECT-TYPE
SYNTAX TrpzClientAccessMode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client access mode (ap, wired).
This object is used within notifications and is not accessible.
Intended to replace trpzClientAccessType.
(In 6.0, direct- and network-attached APs were unified.)"
::= { trpzTemporary 90 }
trpzClientAuthorizationReason OBJECT-TYPE
SYNTAX TrpzClientAuthorizationReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why client performed AAA authorization.
This object is used within notifications and is not accessible."
::= { trpzTemporary 91 }
trpzPhysPortNum OBJECT-TYPE
SYNTAX TrpzPhysPortNumberOrZero
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Physical Port Number on the AC.
Zero means the port is unknown or not applicable
(for example, when trpzClientAccessMode = 'ap').
This object is used within notifications and is not accessible."
::= { trpzTemporary 92 }
trpzApMgrOldIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IP address of the AP's former primary manager switch.
This object is used within notifications and is not accessible."
::= { trpzTemporary 93 }
trpzApMgrNewIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IP address of the AP's new primary manager switch.
This address was formerly the AP's secondary backup link.
This object is used within notifications and is not accessible."
::= { trpzTemporary 94 }
trpzApMgrChangeReason OBJECT-TYPE
SYNTAX TrpzApMgrChangeReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why the AP's primary manager changed.
This object is used within notifications and is not accessible."
::= { trpzTemporary 95 }
trpzClientClearedReason OBJECT-TYPE
SYNTAX TrpzClientClearedReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why client was cleared.
This object is used within notifications and is not accessible."
::= { trpzTemporary 96 }
trpzMobilityDomainResiliencyStatus OBJECT-TYPE
SYNTAX TrpzMobilityDomainResiliencyStatus
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the current resilient capacity status
for a mobility domain.
This object is used within notifications and is not accessible."
::= { trpzTemporary 97 }
trpzClientSessionElapsedSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the time in seconds elapsed since the start
of the Client Session.
This object is used within notifications and is not accessible."
::= { trpzTemporary 98 }
trpzRadioChannelWidth OBJECT-TYPE
SYNTAX TrpzRadioChannelWidth
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the administratively controlled Channel Width (20MHz/40MHz).
This object is used within notifications and is not accessible."
::= { trpzTemporary 99 }
trpzRadioMimoState OBJECT-TYPE
SYNTAX TrpzRadioMimoState
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the Radio MIMO State, as seen by the AC
(1x1/2x3/3x3).
This object is used within notifications and is not accessible."
::= { trpzTemporary 100 }
trpzClientRadioType OBJECT-TYPE
SYNTAX TrpzRadioType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the Client Radio Type, as detected by an attached AP
and reported to the AC.
This object is used within notifications and is not accessible."
::= { trpzTemporary 101 }
trpzRFDetectXmtrRadioType OBJECT-TYPE
SYNTAX TrpzRadioType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the Radio Type of the Transmitter,
as detected by an attached AP and reported to the AC.
The Transmitter may be a wireless client or an AP.
This object is used within notifications and is not accessible."
::= { trpzTemporary 102 }
trpzRFDetectXmtrCryptoType OBJECT-TYPE
SYNTAX TrpzCryptoType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the Crypto Type used by the Transmitter,
as detected by an attached AP and reported to the AC.
This object is used within notifications and is not accessible."
::= { trpzTemporary 103 }
trpzClusterFailureReason OBJECT-TYPE
SYNTAX TrpzClusterFailureReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why cluster configuration failed to apply.
This object is used within notifications and is not accessible."
::= { trpzTemporary 104 }
trpzClusterFailureDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Display string for describing the cluster configuration failure cause.
This object is used within notifications and is not accessible."
::= { trpzTemporary 105 }
trpzMultimediaCommunicationServerID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The multimedia communication server ID.
This object is used within notifications and is not accessible."
::= { trpzTemporary 106 }
trpzMultimediaLocalStationIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The local multimedia station IP address.
This object is used within notifications and is not accessible."
::= { trpzTemporary 107 }
trpzMultimediaLocalStationPort OBJECT-TYPE
SYNTAX TrpzIpPort
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The local multimedia station UDP port.
This object is used within notifications and is not accessible."
::= { trpzTemporary 108 }
trpzMultimediaLocalStationEndpointID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The local multimedia station endpoint ID.
This object is used within notifications and is not accessible."
::= { trpzTemporary 109 }
trpzMultimediaRemoteStationIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The remote multimedia station IP address.
This object is used within notifications and is not accessible."
::= { trpzTemporary 110 }
trpzMultimediaRemoteStationPort OBJECT-TYPE
SYNTAX TrpzIpPort
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The remote multimedia station UDP port.
This object is used within notifications and is not accessible."
::= { trpzTemporary 111 }
trpzMultimediaRemoteStationEndpointID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The remote multimedia station endpoint ID.
This object is used within notifications and is not accessible."
::= { trpzTemporary 112 }
trpzMultimediaSignalingProtocol OBJECT-TYPE
SYNTAX TrpzMultimediaSignalingProtocol
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The multimedia signaling protocol that was used for
initiating this call (session).
This object is used within notifications and is not accessible."
::= { trpzTemporary 113 }
trpzMultimediaCallBandwidthAndCodec OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Display string providing information about the multimedia call
codec and bandwidth.
This object is used within notifications and is not accessible."
::= { trpzTemporary 114 }
trpzMultimediaCallDataRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The data rate, in Kbps.
This object is used within notifications and is not accessible."
::= { trpzTemporary 115 }
trpzMultimediaCallRssi OBJECT-TYPE
SYNTAX TrpzRssi
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client RSSI (Received Signal Strength Indicator),
in decibels referred to 1 milliwatt (dBm).
A higher value indicates a stronger signal.
This object is used within notifications and is not accessible."
::= { trpzTemporary 116 }
trpzMultimediaCallFailureReason OBJECT-TYPE
SYNTAX TrpzMultimediaCallFailureReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why the multimedia call has failed.
This object is used within notifications and is not accessible."
::= { trpzTemporary 117 }
trpzMultimediaCallDirection OBJECT-TYPE
SYNTAX TrpzMultimediaCallDirection
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the multimedia call direction (incoming/outgoing).
This object is used within notifications and is not accessible."
::= { trpzTemporary 118 }
trpzApTunnelLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the maximum number of tunnels supported for an AP.
This object is used within notifications and is not accessible."
::= { trpzTemporary 119 }
trpzWsTunnelLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the maximum number of tunnels supported for an AC
(wireless switch).
This object is used within notifications and is not accessible."
::= { trpzTemporary 120 }
trpzWsTunnelLimitType OBJECT-TYPE
SYNTAX TrpzWsTunnelLimitType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the type of limit exceeded
that caused the AC (wireless switch)
to reject a tunnel creation request.
This object is used within notifications and is not accessible."
::= { trpzTemporary 121 }
trpzRFNoiseSourceID OBJECT-TYPE
SYNTAX TrpzRFNoiseSourceID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"RF Noise Source ID.
This object is used within notifications and is not accessible."
::= { trpzTemporary 122 }
trpzRFNoiseSourceType OBJECT-TYPE
SYNTAX TrpzRFNoiseSourceType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"RF Noise Source Type.
This object is used within notifications and is not accessible."
::= { trpzTemporary 123 }
trpzRFNoiseChannel OBJECT-TYPE
SYNTAX TrpzChannelNum
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Channel number.
This object is used within notifications and is not accessible."
::= { trpzTemporary 124 }
trpzRFNoiseRssi OBJECT-TYPE
SYNTAX TrpzRssi
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The noise RSSI (Received Signal Strength Indicator),
in decibels referred to 1 milliwatt (dBm).
A higher value indicates stronger noise.
This object is used within notifications and is not accessible."
::= { trpzTemporary 125 }
trpzRFNoiseDutyCycle OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Estimated Duty Cycle:
fraction of time that a noise source is transmitting.
This object is used within notifications and is not accessible."
::= { trpzTemporary 126 }
trpzRFNoiseChannelInterferenceMeasure OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Severity of channel interference attributed to a noise source.
A higher value indicates more severe interference.
This object is used within notifications and is not accessible."
::= { trpzTemporary 127 }
trpzRFNoiseAge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Age of noise in seconds.
This object is used within notifications and is not accessible."
::= { trpzTemporary 128 }
trpzM2UMulticastAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The address type of 'trpzM2UMulticastAddr'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 129 }
trpzM2UMulticastAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The multicast address for which conversion to unicast is performed.
The type of this address is specified in 'trpzM2UMulticastAddrType'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 130 }
trpzM2UConvNotPossibleReason OBJECT-TYPE
SYNTAX TrpzM2UConvNotPossibleReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why multicast to unicast conversion cannot be
performed on an AP with this feature enabled.
This object is used within notifications and is not accessible."
::= { trpzTemporary 131 }
trpzRadioBand OBJECT-TYPE
SYNTAX TrpzRadioBand
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the radio band used in an auto-tune operation.
This object is used within notifications and is not accessible."
::= { trpzTemporary 132 }
trpzRadiosTunedCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates how many radios had their operational characteristics
changed as a result of an auto-tune process.
This object is used within notifications and is not accessible."
::= { trpzTemporary 133 }
trpzAutoTuneFailureReason OBJECT-TYPE
SYNTAX TrpzAutoTuneFailureReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the reason why an auto-tune operation failed to complete.
This object is used within notifications and is not accessible."
::= { trpzTemporary 134 }
trpzClientAuthServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The address type of 'trpzClientAuthServerAddr'.
Only the value 'ipv4(1)' is reported as of release 8.0.
This object is used within notifications and is not accessible."
::= { trpzTemporary 135 }
trpzClientAuthServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Internet address of the client authentication server.
The type of this address is specified in 'trpzClientAuthServerAddrType'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 136 }
trpzClientRoamedFromWsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The address type of 'trpzClientRoamedFromWsAddr'.
Only the value 'ipv4(1)' is reported as of release 8.0.
This object is used within notifications and is not accessible."
::= { trpzTemporary 137 }
trpzClientRoamedFromWsAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The system IP address of the AC (wireless switch) a client roamed from.
The type of this address is specified in 'trpzClientRoamedFromWsAddrType'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 138 }
trpzClientDynAuthorClientAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The address type of 'trpzClientDynAuthorClientAddr'.
Only the value 'ipv4(1)' is reported as of release 8.0.
This object is used within notifications and is not accessible."
::= { trpzTemporary 139 }
trpzClientDynAuthorClientAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The dynamic authorization client IP address which caused
the change of authorization.
The type of this address is specified in
'trpzClientDynAuthorClientAddrType'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 140 }
trpzClientIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The address type of 'trpzClientIpAddr'.
Only the values 'ipv4(1)' and 'ipv6(2)' are reported.
This object is used within notifications and is not accessible."
::= { trpzTemporary 141 }
trpzClientIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates an IP address of the client.
The type of this address is specified in 'trpzClientIpAddrType'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 142 }
trpzClientIPv4Addr OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IPv4 address of the client.
If the client does not use the IPv4 stack, or its IPv4 address
has not yet been detected, then all octets will have the value 0.
This object is used within notifications and is not accessible."
::= { trpzTemporary 143 }
trpzClientIPv6LinkLocalAddr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IPv6 link-local address of the client.
If the client does not use the IPv6 stack, or its IPv6 link-local
address has not yet been detected, then all octets
will have the value 0.
This object is used within notifications and is not accessible."
::= { trpzTemporary 144 }
trpzApRadioIndex OBJECT-TYPE
SYNTAX TrpzApRadioIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"AP Radio index.
Intended to replace 'trpzAPRadioNum'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 145 }
trpzClientRoamedFromAccessMode OBJECT-TYPE
SYNTAX TrpzClientAccessMode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The client access mode (ap, wired) that a client roamed from.
This object is used within notifications and is not accessible.
Obsoletes 'trpzClientRoamedFromAccessType'.
(In 6.0, direct- and network-attached APs were unified.)"
::= { trpzTemporary 146 }
trpzClientRoamedFromApNum OBJECT-TYPE
SYNTAX TrpzApNum
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The number of the AP the client roamed from.
Obsoletes 'trpzClientRoamedFromDAPNum'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 147 }
trpzClientRoamedFromRadioIndex OBJECT-TYPE
SYNTAX TrpzApRadioIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The index of the AP Radio the client roamed from.
Obsoletes 'trpzClientRoamedFromRadioNum'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 148 }
trpzClientRoamedFromPhysPortNum OBJECT-TYPE
SYNTAX TrpzPhysPortNumberOrZero
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Identifies the physical port on the AC used by the
wired-auth client, before roam.
Zero means the port is unknown or not applicable
(for example, when trpzClientRoamedFromAccessMode = 'ap').
Obsoletes 'trpzClientRoamedFromPortNum'.
This object is used within notifications and is not accessible."
::= { trpzTemporary 149 }
trpzClientDeviceType OBJECT-TYPE
SYNTAX TrpzClientDeviceType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of the client device.
Is a zero length string if unknown.
This object is used within notifications and is not accessible."
::= { trpzTemporary 150 }
trpzClientDeviceTypeOld OBJECT-TYPE
SYNTAX TrpzClientDeviceType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The type of the client device, before change.
Is a zero length string if unknown.
This object is used within notifications and is not accessible."
::= { trpzTemporary 151 }
trpzClientDeviceGroup OBJECT-TYPE
SYNTAX TrpzClientDeviceGroupName
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The group that the detected client device type
belongs to.
Is a zero length string if the device type is unknown.
This object is used within notifications and is not accessible."
::= { trpzTemporary 152 }
trpzClientDeviceProfileName OBJECT-TYPE
SYNTAX TrpzClientDeviceProfileName
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of the device profile associated with
the detected client device.
A device profile is a collection of policies that
apply to one or more types of client devices.
Is a zero length string in 'detect-only' mode or if not set.
In 'detect-only' mode policy enforcement is disabled.
This object is used within notifications and is not accessible."
::= { trpzTemporary 153 }
trpzClientDeviceProfileNameOld OBJECT-TYPE
SYNTAX TrpzClientDeviceProfileName
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of the device profile associated with
the detected client device, before change.
A device profile is a collection of policies that
apply to one or more types of client devices.
Is a zero length string in 'detect-only' mode or if not set.
In 'detect-only' mode policy enforcement is disabled.
This object is used within notifications and is not accessible."
::= { trpzTemporary 154 }
trpzClientDeviceProfileChangeReason OBJECT-TYPE
SYNTAX TrpzClientDeviceProfileChangeReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason why the device profile changed.
This object is used within notifications and is not accessible."
::= { trpzTemporary 155 }
-- Notification definitions
trpzDeviceFailTrap NOTIFICATION-TYPE
OBJECTS { trpzDeviceId }
STATUS current
DESCRIPTION
"The device has a failure indication"
::= { trpzTrapsV2 1 }
trpzDeviceOkayTrap NOTIFICATION-TYPE
OBJECTS { trpzDeviceId }
STATUS current
DESCRIPTION
"The device has recovered"
::= { trpzTrapsV2 2 }
trpzPoEFailTrap NOTIFICATION-TYPE
OBJECTS { trpzPortNum }
STATUS current
DESCRIPTION
"PoE has failed on the indicated port"
::= { trpzTrapsV2 3 }
trpzApTimeoutTrap NOTIFICATION-TYPE
OBJECTS { trpzPortNum, trpzAPMACAddress, trpzAPAccessType,
trpzDAPNum }
STATUS obsolete
DESCRIPTION
"The AP entering the AC at port trpzPortNum with MAC
trpzRadioMacAddress and of the access type (ap or dap)
has not responded.
Replaced by trpzApNonOperStatusTrap2,
with trpzApTransition = 'timeout'."
::= { trpzTrapsV2 4 }
trpzAPBootTrap NOTIFICATION-TYPE
OBJECTS { trpzPortNum, trpzAPMACAddress, trpzAPAccessType,
trpzDAPNum }
STATUS obsolete
DESCRIPTION
"The AP entering the AC at port trpzPortNum with MAC
trpzRadioMacAddress and of the access type (ap or dap) has booted.
Replaced by trpzApNonOperStatusTrap2,
with trpzApTransition = 'bootSuccess'."
::= { trpzTrapsV2 5 }
trpzMobilityDomainJoinTrap NOTIFICATION-TYPE
OBJECTS { trpzMobilityDomainIp }
STATUS current
DESCRIPTION
"The mobility domain member has received an UP notice from the
remote address."
::= { trpzTrapsV2 6 }
trpzMobilityDomainTimeoutTrap NOTIFICATION-TYPE
OBJECTS { trpzMobilityDomainIp }
STATUS current
DESCRIPTION
"The mobility domain member has declared the remote address
to be DOWN."
::= { trpzTrapsV2 7 }
trpzMpMichaelMICFailure NOTIFICATION-TYPE
OBJECTS { trpzPortNum,
trpzRadioMACAddress,
trpzRadioSSID,
trpzAPRadioNum,
trpzClientMACAddress,
trpzClientMACAddress }
STATUS obsolete
DESCRIPTION
"Two Michael MIC failures were seen within 60 seconds of each other.
Obsoleted by trpzMichaelMICFailure."
::= { trpzTrapsV2 8 }
trpzRFDetectRogueAPTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds a rogue AP.
XmtrMacAddr is the radio MAC address from the beacon.
ListenerListInfo is a display string of a list of
listener information.
Obsoleted by trpzRFDetectRogueDeviceTrap2."
::= { trpzTrapsV2 9 }
trpzRFDetectAdhocUserTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS current
DESCRIPTION
"This trap is sent when RF detection sweep finds a ad-hoc user.
trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user.
trpzRFDetectListenerListInfo is a display string of a list of
listener information."
::= { trpzTrapsV2 10 }
trpzRFDetectRogueDisappearTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr }
STATUS obsolete
DESCRIPTION
"This trap is sent when a rogue has disappeared.
Obsoleted by trpzRFDetectRogueDeviceDisappearTrap."
::= { trpzTrapsV2 11 }
trpzClientAuthenticationFailureTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzClientAuthenticationFailureCause,
trpzClientFailureCauseDescription }
STATUS current
DESCRIPTION
"This trap is sent if a client authentication fails."
::= { trpzTrapsV2 12 }
trpzClientAuthorizationFailureTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzClientLocationPolicyIndex,
trpzUserParams,
trpzClientAuthorizationFailureCause,
trpzClientFailureCauseDescription }
STATUS current
DESCRIPTION
"This trap is sent if a client authorization fails."
::= { trpzTrapsV2 13 }
trpzClientAssociationFailureTrap NOTIFICATION-TYPE
OBJECTS { trpzClientMACAddress,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzClientAssociationFailureCause,
trpzClientFailureCauseDescription }
STATUS current
DESCRIPTION
"This trap is sent if a client association fails."
::= { trpzTrapsV2 14 }
trpzClientAuthorizationSuccessTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientVLANName,
trpzClientSessionState,
trpzClientSessionStartTime,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzRadioRssi }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client authorizes.
Obsoleted by trpzClientAuthorizationSuccessTrap5."
::= { trpzTrapsV2 15 }
trpzClientDeAssociationTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientVLANName,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID }
STATUS obsolete
DESCRIPTION
"This trap is sent if a client de-association occurred.
Obsoleted by trpzClientDeAssociationTrap2."
::= { trpzTrapsV2 16 }
trpzClientRoamingTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzClientRoamedFromAccessType,
trpzClientRoamedFromPortNum,
trpzClientRoamedFromRadioNum,
trpzClientRoamedFromDAPNum,
trpzClientRoamedFromWsIp,
trpzClientTimeSinceLastRoam }
STATUS obsolete
DESCRIPTION
"This trap is sent if a client roams from one location to another.
Obsoleted by trpzClientRoamingTrap2."
::= { trpzTrapsV2 17 }
trpzAutoTuneRadioPowerChangeTrap NOTIFICATION-TYPE
OBJECTS { trpzRadioMACAddress,
trpzNewPowerLevel,
trpzOldPowerLevel,
trpzRadioPowerChangeReason,
trpzRadioPowerChangeDescription }
STATUS current
DESCRIPTION
"This trap is sent if a radio's power level has changed based
on auto-tune."
::= { trpzTrapsV2 18 }
trpzAutoTuneRadioChannelChangeTrap NOTIFICATION-TYPE
OBJECTS { trpzRadioMACAddress,
trpzNewChannelNum,
trpzOldChannelNum,
trpzChannelChangeReason }
STATUS current
DESCRIPTION
"This trap is sent if a radio's channel has changed based on auto-tune."
::= { trpzTrapsV2 19 }
trpzCounterMeasureStartTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRadioMACAddress }
STATUS current
DESCRIPTION
"This trap is sent when counter measures are started against a rogue.
trpzRFDetectXmtrMacAddr is the mac address of the rogue we
are doing counter measures against.
trpzRadioMACAddress identifies the radio performing the countermeasures."
::= { trpzTrapsV2 20 }
trpzCounterMeasureStopTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRadioMACAddress }
STATUS current
DESCRIPTION
"This trap is sent when counter measures are stopped against a rogue.
trpzRFDetectXmtrMacAddr is the mac address of the rogue we
were doing counter measures against.
trpzRadioMACAddress identifies the radio performing the countermeasures."
::= { trpzTrapsV2 21 }
trpzClientDot1xFailureTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientMACAddress,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzDAPNum,
trpzPortNum,
trpzAPRadioNum,
trpzRadioSSID,
trpzClientDot1xState,
trpzClientDot1xFailureCause,
trpzClientFailureCauseDescription }
STATUS current
DESCRIPTION
"This trap is sent if a client failed 802.1X."
::= { trpzTrapsV2 22 }
trpzClientClearedTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzClientSessionElapsedTime,
trpzLocalId}
STATUS obsolete
DESCRIPTION
"This trap is sent when a client session is cleared.
Obsoleted by trpzClientClearedTrap3."
::= { trpzTrapsV2 23 }
trpzClientAuthorizationSuccessTrap2 NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientVLANName,
trpzClientSessionState,
trpzClientSessionStartTime,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzUserAccessType,
trpzLocalId }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client authorizes.
Obsoleted by trpzClientAuthorizationSuccessTrap5."
::= { trpzTrapsV2 24 }
trpzRFDetectSpoofedMacAPTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds an AP using
the MAC of the listener.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
Obsoleted by trpzRFDetectDoSTrap and trpzRFDetectRogueDeviceTrap2.
One of the two traps will be sent depending on the type of
AP MAC spoofing detected."
::= { trpzTrapsV2 25 }
trpzRFDetectSpoofedSsidAPTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds an AP using
the SSID of the listener, and the AP is not in the
mobility domain.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
Obsoleted by trpzRFDetectRogueDeviceTrap2
and trpzRFDetectSuspectDeviceTrap2.
One of the two traps will be sent,
depending on RF detection classification rules."
::= { trpzTrapsV2 26 }
trpzRFDetectDoSTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectDoSType,
trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS current
DESCRIPTION
"This trap is sent when RF detection finds a denial
of service (DoS) occurring.
trpzRFDetectDoSType specifies the type of DoS.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectListenerListInfo is a display string of a list of
listener information."
::= { trpzTrapsV2 27 }
trpzRFDetectClientViaRogueWiredAPTrap NOTIFICATION-TYPE
OBJECTS { trpzSourceWsIp,
trpzPortNum,
trpzClientVLANid,
trpzClientVLANtag,
trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client is detected that connected
via a rogue AP that is attached to a wired port.
trpzSourceWsIp is the IP address of the AC (switch) with the wired port.
trpzPortNum is the port on the AC.
trpzClientVLANid is the VLAN ID of the client's traffic.
trpzClientVLANtag is the VLAN tag of the client's traffic.
trpzRFDetectXmtrMacAddr is the MAC address of the client.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3."
::= { trpzTrapsV2 28 }
trpzRFDetectInterferingRogueAPTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds an interfering
rogue AP.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
Obsoleted by trpzRFDetectSuspectDeviceTrap2."
::= { trpzTrapsV2 29 }
trpzRFDetectInterferingRogueDisappearTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr }
STATUS obsolete
DESCRIPTION
"This trap is sent when an interfering rogue has disappeared.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
Obsoleted by trpzRFDetectSuspectDeviceDisappearTrap."
::= { trpzTrapsV2 30 }
trpzRFDetectUnAuthorizedSsidTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds use of
an unauthorized SSID.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
Obsoleted by trpzRFDetectRogueDeviceTrap2
and trpzRFDetectSuspectDeviceTrap2.
One of the two traps will be sent if the device having an
unauthorized SSID is classified as rogue or suspect because of this."
::= { trpzTrapsV2 31 }
trpzRFDetectUnAuthorizedOuiTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds use of
an unauthorized OUI.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
Obsoleted by trpzRFDetectRogueDeviceTrap2
and trpzRFDetectSuspectDeviceTrap2.
One of the two traps will be sent if the device having an
unauthorized OUI is classified as rogue or suspect because of this."
::= { trpzTrapsV2 32 }
trpzRFDetectUnAuthorizedAPTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds operation
of an unauthorized AP.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
Obsoleted by trpzRFDetectRogueDeviceTrap2."
::= { trpzTrapsV2 33 }
trpzDAPConnectWarningTrap NOTIFICATION-TYPE
OBJECTS { trpzDeviceModel,
trpzDeviceSerNum,
trpzRsaPubKeyFingerPrint,
trpzDAPconnectWarningType }
STATUS obsolete
DESCRIPTION
"A DAP, tried to connect to the AC.
trpzDeviceModel provides the model of the DAP.
trpzDeviceSerNum provides the serial number of the DAP.
trpzRsaPubKeyFingerPrint provides the computed
fingerprint of the DAP.
trpzDAPconnectWarningType provides the type
of connect warning.
Replaced by trpzApNonOperStatusTrap2,
with trpzApTransition = 'connectFail'."
::= { trpzTrapsV2 34 }
trpzRFDetectDoSPortTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectDoSType,
trpzRFDetectXmtrMacAddr,
trpzClientAccessType,
trpzPortNum,
trpzDAPNum }
STATUS current
DESCRIPTION
"This trap is sent when RF detection finds a denial
of service (DoS) occurring. This has port and
AP info instead of 'Listener info'.
trpzRFDetectDoSType specifies the type of DoS.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzClientAccessType specifies whether wired, AP, or DAP.
trpzPortNum (for wired or AP), the port that is used.
trpzDAPNum (for a DAP), the ID of the DAP."
::= { trpzTrapsV2 35 }
trpzMpMichaelMICFailure2 NOTIFICATION-TYPE
OBJECTS { trpzPortNum,
trpzAPRadioNum,
trpzClientMACAddress,
trpzClientMACAddress2 }
STATUS obsolete
DESCRIPTION
"Two Michael MIC failures were seen within 60 seconds of
each other. Object trpzClientMACAddress is the source
of the first failure, and object trpzClientMACAddress2
source of the second failure.
Obsoleted by trpzMichaelMICFailure."
::= { trpzTrapsV2 36 }
trpzApNonOperStatusTrap NOTIFICATION-TYPE
OBJECTS { trpzDeviceSerNum,
trpzAPMACAddress,
trpzApAttachType,
trpzApPortOrDapNum,
trpzApName,
trpzApTransition,
trpzApFailDetail,
trpzApWasOperational }
STATUS obsolete
DESCRIPTION
"This trap is sent when the AP changes state
and the new one is a non-operational state.
Obsoleted by trpzApNonOperStatusTrap2."
::= { trpzTrapsV2 37 }
trpzApOperRadioStatusTrap NOTIFICATION-TYPE
OBJECTS { trpzDeviceSerNum,
trpzApAttachType,
trpzApPortOrDapNum,
trpzApName,
trpzAPRadioNum,
trpzRadioMACAddress,
trpzRadioType,
trpzRadioConfigState,
trpzApConnectSecurityType,
trpzApServiceAvailability }
STATUS obsolete
DESCRIPTION
"This trap is sent when the Radio changes state.
It also contains aggregate information about the AP
in operational state - security level and service availability.
Obsoleted by trpzApOperRadioStatusTrap3."
::= { trpzTrapsV2 38 }
trpzClientIpAddrChangeTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientVLANName,
trpzClientSessionState,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzUserAccessType,
trpzLocalId,
trpzClientIpAddrChangeReason }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client's IP address
changes. The most likely case for this is when
the client first connects to the network.
Obsoleted by trpzClientIpAddrChangeTrap2."
::= { trpzTrapsV2 39 }
trpzClientAssociationSuccessTrap NOTIFICATION-TYPE
OBJECTS { trpzClientMACAddress,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID }
STATUS current
DESCRIPTION
"This trap is sent if a client association succeeds.
WARNING: DO NOT enable it in normal use.
It may impair switch performance!
Only recommended for debugging network issues."
::= { trpzTrapsV2 40 }
trpzClientAuthenticationSuccessTrap NOTIFICATION-TYPE
OBJECTS { trpzClientMACAddress,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID }
STATUS current
DESCRIPTION
"This trap is sent if a client authentication succeeds."
::= { trpzTrapsV2 41 }
trpzClientDeAuthenticationTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientVLANName,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID }
STATUS obsolete
DESCRIPTION
"This trap is sent if a client de-authentication occurred.
Obsoleted by trpzClientDeAuthenticationTrap2."
::= { trpzTrapsV2 42 }
trpzRFDetectBlacklistedTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzClientAccessType,
trpzPortNum,
trpzDAPNum,
trpzBlacklistingRemainingTime,
trpzBlacklistingCause }
STATUS current
DESCRIPTION
"This trap is sent if an association, re-association or de-association
request (packet) is detected from a blacklisted transmitter
(identified by MAC: 'trpzRFDetectXmtrMacAddr').
If 'trpzBlacklistingCause' is 'configured',
then 'trpzBlacklistingRemainingTime' will be zero, meaning indefinite
time (depending on administrative actions on the Black List).
Otherwise, 'trpzBlacklistingRemainingTime' will indicate the time
in seconds until this transmitter's requests could be allowed."
::= { trpzTrapsV2 43 }
trpzRFDetectClientViaRogueWiredAPTrap2 NOTIFICATION-TYPE
OBJECTS { trpzSourceWsIp,
trpzPortNum,
trpzClientVLANid,
trpzClientVLANtag,
trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo,
trpzRFDetectRogueAPMacAddr }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client is detected that connected
via a rogue AP that is attached to a wired port.
trpzSourceWsIp is the IP address of the AC (switch)
with the wired port.
trpzPortNum is the port on the AC.
trpzClientVLANid is the VLAN ID of the client's traffic.
trpzClientVLANtag is the VLAN tag of the client's traffic.
trpzRFDetectXmtrMacAddr is the MAC address of the client.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired)
the client is connected to.
Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3."
::= { trpzTrapsV2 44 }
trpzRFDetectAdhocUserDisappearTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr }
STATUS current
DESCRIPTION
"This trap is sent when RF detection sweep finds that
an ad-hoc user disappeared.
trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user."
::= { trpzTrapsV2 45 }
trpzApRejectLicenseExceededTrap NOTIFICATION-TYPE
OBJECTS { trpzNumLicensedActiveAPs }
STATUS current
DESCRIPTION
"This trap is sent when an AC (wireless switch) receives a packet
from an inactive AP and attaching that AP would make the AC
exceed the maximum (licensed) number of active APs."
::= { trpzTrapsV2 46 }
trpzClientDynAuthorChangeSuccessTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientSessionState,
trpzClientDynAuthorClientIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzUserAccessType,
trpzLocalId,
trpzChangedUserParamOldValues,
trpzChangedUserParamNewValues }
STATUS obsolete
DESCRIPTION
"This trap is sent when the authorization attributes for a user
are dynamically changed by an authorized dynamic authorization
client.
Obsoleted by trpzClientDynAuthorChangeSuccessTrap2."
::= { trpzTrapsV2 47 }
trpzClientDynAuthorChangeFailureTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientDynAuthorClientIp,
trpzClientAuthenProtocolType,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzUserParams,
trpzClientAuthorizationFailureCause,
trpzClientFailureCauseDescription }
STATUS current
DESCRIPTION
"This trap is sent if a change of authorization request sent by
an authorized dynamic authorization client is unsuccessful."
::= { trpzTrapsV2 48 }
trpzClientDisconnectTrap NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientAccessType,
trpzPortNum,
trpzAPRadioNum,
trpzDAPNum,
trpzRadioSSID,
trpzLocalId,
trpzClientDisconnectSource,
trpzClientDisconnectDescription }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client session is terminated administratively.
Obsoleted by trpzClientDisconnectTrap2."
::= { trpzTrapsV2 49 }
trpzMobilityDomainFailOverTrap NOTIFICATION-TYPE
OBJECTS { trpzMobilityDomainSecondarySeedIp }
STATUS current
DESCRIPTION
"This trap is sent when the Mobility Domain fails over
to the secondary seed."
::= { trpzTrapsV2 50 }
trpzMobilityDomainFailBackTrap NOTIFICATION-TYPE
OBJECTS { trpzMobilityDomainPrimarySeedIp }
STATUS current
DESCRIPTION
"This trap is sent when the Mobility Domain fails back
to the primary seed."
::= { trpzTrapsV2 51 }
trpzRFDetectRogueDeviceTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo,
trpzRFDetectClassificationReason }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds a rogue device.
XmtrMacAddr is the radio MAC address from the beacon.
ListenerListInfo is a display string of a list of
listener information.
ClassificationReason indicates the reason why the device
is classified as rogue.
Obsoleted by trpzRFDetectRogueDeviceTrap2."
::= { trpzTrapsV2 52 }
trpzRFDetectRogueDeviceDisappearTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr }
STATUS current
DESCRIPTION
"This trap is sent when a rogue device has disappeared.
This trap obsoletes the trpzRFDetectRogueDisappearTrap."
::= { trpzTrapsV2 53 }
trpzRFDetectSuspectDeviceTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo,
trpzRFDetectClassificationReason }
STATUS obsolete
DESCRIPTION
"This trap is sent when RF detection finds a suspect device.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
ClassificationReason indicates the reason why the device
is classified as suspect.
Obsoleted by trpzRFDetectSuspectDeviceTrap2."
::= { trpzTrapsV2 54 }
trpzRFDetectSuspectDeviceDisappearTrap NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr }
STATUS current
DESCRIPTION
"This trap is sent when a suspect device has disappeared.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
This trap obsoletes the trpzRFDetectInterferingRogueDisappearTrap."
::= { trpzTrapsV2 55 }
trpzRFDetectClientViaRogueWiredAPTrap3 NOTIFICATION-TYPE
OBJECTS { trpzSourceWsIp,
trpzPortNum,
trpzClientVLANid,
trpzClientVLANtag,
trpzRFDetectXmtrMacAddr,
trpzRFDetectListenerListInfo,
trpzRFDetectRogueAPMacAddr,
trpzRFDetectClassificationReason }
STATUS current
DESCRIPTION
"This trap is sent when a client is detected that connected
via a rogue AP that is attached to a wired port.
trpzSourceWsIp is the IP address of the AC (switch)
with the wired port.
trpzPortNum is the port on the AC.
trpzClientVLANid is the VLAN ID of the client's traffic.
trpzClientVLANtag is the VLAN tag of the client's traffic.
trpzRFDetectXmtrMacAddr is the MAC address of the client.
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired)
the client is connected to.
ClassificationReason indicates the reason why the AP
is classified as rogue.
This trap obsoletes the trpzRFDetectClientViaRogueWiredAPTrap and
trpzRFDetectClientViaRogueWiredAPTrap2."
::= { trpzTrapsV2 56 }
trpzRFDetectClassificationChangeTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is sent when RF detection classification rules change."
::= { trpzTrapsV2 57 }
trpzConfigurationSavedTrap NOTIFICATION-TYPE
OBJECTS { trpzConfigSaveFileName,
trpzConfigSaveInitiatorType,
trpzConfigSaveInitiatorIp,
trpzConfigSaveInitiatorDetails,
trpzConfigSaveGeneration }
STATUS current
DESCRIPTION
"This trap is sent when the running configuration of the switch
is written to a configuration file."
::= { trpzTrapsV2 58 }
trpzApNonOperStatusTrap2 NOTIFICATION-TYPE
OBJECTS { trpzDeviceSerNum,
trpzAPMACAddress,
trpzApNum,
trpzApName,
trpzApTransition,
trpzApFailDetail,
trpzApWasOperational }
STATUS current
DESCRIPTION
"This trap is sent when the AP changes state
and the new one is a non-operational state.
Obsoletes trpzApNonOperStatusTrap."
::= { trpzTrapsV2 59 }
trpzApOperRadioStatusTrap2 NOTIFICATION-TYPE
OBJECTS { trpzDeviceSerNum,
trpzApNum,
trpzApName,
trpzAPRadioNum,
trpzRadioMACAddress,
trpzRadioType,
trpzRadioMode,
trpzRadioConfigState,
trpzApConnectSecurityType,
trpzApServiceAvailability }
STATUS obsolete
DESCRIPTION
"This trap is sent when the Radio changes state.
It also contains aggregate information about the AP
in operational state - security level and service availability.
Obsoleted by trpzApOperRadioStatusTrap3."
::= { trpzTrapsV2 60 }
trpzMichaelMICFailure NOTIFICATION-TYPE
OBJECTS { trpzApNum,
trpzAPRadioNum,
trpzRadioMACAddress,
trpzMichaelMICFailureCause,
trpzClientMACAddress,
trpzClientMACAddress2 }
STATUS current
DESCRIPTION
"Two Michael MIC failures were seen within 60 seconds of each other.
Object trpzClientMACAddress indicates
the source of the first failure,
and object trpzClientMACAddress2 indicates
the source of the second failure.
Service is interrupted for 60 seconds on the radio
due to TKIP countermeasures having commenced.
The radio is identified by trpzApNum and trpzAPRadioNum.
An alternative way to identify the radio is trpzRadioMACAddress.
Obsoletes trpzMpMichaelMICFailure and trpzMpMichaelMICFailure2."
::= { trpzTrapsV2 61 }
trpzClientAuthorizationSuccessTrap3 NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientVLANName,
trpzClientSessionState,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzAPRadioNum,
trpzRadioSSID,
trpzUserAccessType,
trpzLocalId,
trpzClientAuthorizationReason }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client authorizes.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzAPRadioNum, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
at the time this trap was sent.
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoleted by trpzClientAuthorizationSuccessTrap5."
::= { trpzTrapsV2 62 }
trpzApManagerChangeTrap NOTIFICATION-TYPE
OBJECTS { trpzDeviceSerNum,
trpzAPMACAddress,
trpzApNum,
trpzApName,
trpzApMgrOldIp,
trpzApMgrNewIp,
trpzApMgrChangeReason }
STATUS current
DESCRIPTION
"This trap is sent when the AP's secondary link becomes its
primary link."
::= { trpzTrapsV2 63 }
trpzClientClearedTrap2 NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzAPRadioNum,
trpzRadioSSID,
trpzClientSessionElapsedSeconds,
trpzLocalId,
trpzClientClearedReason }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client session is cleared.
Obsoleted by trpzClientClearedTrap3."
::= { trpzTrapsV2 64 }
trpzMobilityDomainResiliencyStatusTrap NOTIFICATION-TYPE
OBJECTS { trpzMobilityDomainResiliencyStatus }
STATUS current
DESCRIPTION
"This trap is sent by a mobility domain seed to announce
changes in resilient capacity status."
::= { trpzTrapsV2 65 }
trpzApOperRadioStatusTrap3 NOTIFICATION-TYPE
OBJECTS { trpzDeviceSerNum,
trpzApNum,
trpzApName,
trpzAPRadioNum,
trpzRadioMACAddress,
trpzRadioType,
trpzRadioMode,
trpzRadioConfigState,
trpzRadioChannelWidth,
trpzRadioMimoState,
trpzApConnectSecurityType,
trpzApServiceAvailability }
STATUS current
DESCRIPTION
"This trap is sent when the Radio changes state.
It also contains aggregate information about the AP
in operational state - security level and service availability.
Obsoletes trpzApOperRadioStatusTrap
and trpzApOperRadioStatusTrap2."
::= { trpzTrapsV2 66 }
trpzClientAuthorizationSuccessTrap4 NOTIFICATION-TYPE
OBJECTS { trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIp,
trpzClientVLANName,
trpzClientSessionState,
trpzClientAuthServerIp,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzAPRadioNum,
trpzRadioSSID,
trpzClientRadioType,
trpzUserAccessType,
trpzLocalId,
trpzClientAuthorizationReason }
STATUS obsolete
DESCRIPTION
"This trap is sent when a client authorizes.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzAPRadioNum, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
at the time this trap was sent;
trpzClientRadioType gives the type of radio used by this client.
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoleted by trpzClientAuthorizationSuccessTrap5."
::= { trpzTrapsV2 67 }
trpzRFDetectRogueDeviceTrap2 NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectXmtrRadioType,
trpzRFDetectXmtrCryptoType,
trpzRFDetectListenerListInfo,
trpzRFDetectClassificationReason }
STATUS current
DESCRIPTION
"This trap is sent when RF detection finds a rogue device.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectXmtrRadioType indicates the Type of Radio
used by the transmitter (rogue device).
trpzRFDetectXmtrCryptoType indicates the Type of Crypto
used by the transmitter (rogue device).
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
trpzRFDetectClassificationReason indicates the reason
why the device is classified as rogue.
Obsoletes trpzRFDetectRogueAPTrap,
trpzRFDetectUnAuthorizedAPTrap,
trpzRFDetectRogueDeviceTrap."
::= { trpzTrapsV2 68 }
trpzRFDetectSuspectDeviceTrap2 NOTIFICATION-TYPE
OBJECTS { trpzRFDetectXmtrMacAddr,
trpzRFDetectXmtrRadioType,
trpzRFDetectXmtrCryptoType,
trpzRFDetectListenerListInfo,
trpzRFDetectClassificationReason }
STATUS current
DESCRIPTION
"This trap is sent when RF detection finds a suspect device.
trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon.
trpzRFDetectXmtrRadioType indicates the Type of Radio
used by the transmitter (suspect device).
trpzRFDetectXmtrCryptoType indicates the Type of Crypto
used by the transmitter (suspect device).
trpzRFDetectListenerListInfo is a display string of a list of
listener information.
trpzRFDetectClassificationReason indicates the reason
why the device is classified as suspect.
Obsoletes trpzRFDetectInterferingRogueAPTrap,
trpzRFDetectSuspectDeviceTrap."
::= { trpzTrapsV2 69 }
trpzClusterFailureTrap NOTIFICATION-TYPE
OBJECTS {
trpzClusterFailureReason,
trpzClusterFailureDescription
}
STATUS current
DESCRIPTION
"This trap is sent when the cluster configuration failed to apply.
If trpzClusterFailureReason = 'validation-error':
The validation error is reported by the receiving end
of the configuration updates.
The receiving end can be any AC (switch) in the mobility domain:
member, secondary seed or primary seed.
- Primary seed will be the receiving end of configuration updates
when Primary seed is joining the cluster
and Secondary seed has preempt mode enabled.
- Both Secondary seed and member will be at the receiving end
when Primary seed is active."
::= { trpzTrapsV2 70 }
trpzMultimediaCallFailureTrap NOTIFICATION-TYPE
OBJECTS {
trpzClientMACAddress,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzAPRadioNum,
trpzRadioSSID,
trpzMultimediaCommunicationServerID,
trpzMultimediaCallDirection,
trpzMultimediaLocalStationIp,
trpzMultimediaLocalStationPort,
trpzMultimediaLocalStationEndpointID,
trpzMultimediaRemoteStationIp,
trpzMultimediaRemoteStationPort,
trpzMultimediaRemoteStationEndpointID,
trpzMultimediaSignalingProtocol,
trpzMultimediaCallBandwidthAndCodec,
trpzMultimediaCallDataRate,
trpzMultimediaCallRssi,
trpzMultimediaCallFailureReason
}
STATUS current
DESCRIPTION
"This trap is sent when a multimedia call fails."
::= { trpzTrapsV2 71 }
trpzApTunnelLimitExceededTrap NOTIFICATION-TYPE
OBJECTS {
trpzDeviceSerNum,
trpzAPMACAddress,
trpzApNum,
trpzApTunnelLimit
}
STATUS current
DESCRIPTION
"This trap is sent by the AP primary controller (PAM)
when an AP rejects a tunnel creation request because
it has already created the maximum number of tunnels it can support."
::= { trpzTrapsV2 72 }
trpzWsTunnelLimitExceededTrap NOTIFICATION-TYPE
OBJECTS {
trpzWsTunnelLimit,
trpzWsTunnelLimitType
}
STATUS current
DESCRIPTION
"This trap is sent when the AC (wireless switch)
rejects a tunnel creation request because it has reached
the maximum number of tunnels supported
(indicated by 'trpzWsTunnelLimit').
When trpzWsTunnelLimitType = 'platform-tunnel-limit' (2)
the AC has reached the maximum tunnel capacity,
which depends on the platform.
When trpzWsTunnelLimitType = 'ap-ws-tunnel-limit' (3)
the AC has reached the AP-to-switch tunnels limit,
which depends on the current situation of the AC
(mobility domain, network domain, network resiliency status)."
::= { trpzTrapsV2 73 }
trpzRFNoiseSourceTrap NOTIFICATION-TYPE
OBJECTS {
trpzRFNoiseSourceID,
trpzRFNoiseSourceType,
trpzRadioMACAddress,
trpzRFNoiseChannel,
trpzRFNoiseRssi,
trpzRFNoiseDutyCycle,
trpzRFNoiseChannelInterferenceMeasure,
trpzRFNoiseAge
}
STATUS current
DESCRIPTION
"This trap is sent upon the appearance of a new noise source.
'trpzRadioMACAddress' indicates the listener
(the AP radio reporting the noise).
A given combination of noise source ID, listener and channel
should trigger this trap at most once every 15 minutes."
::= { trpzTrapsV2 74 }
trpzM2UConvNotPossibleTrap NOTIFICATION-TYPE
OBJECTS {
trpzRadioSSID,
trpzApNum,
trpzApName,
trpzM2UMulticastAddrType,
trpzM2UMulticastAddr,
trpzM2UConvNotPossibleReason
}
STATUS current
DESCRIPTION
"This trap is sent when multicast to unicast conversion is enabled
on the AP, but cannot be performed."
::= { trpzTrapsV2 75 }
trpzM2UConvAvailabilityRestoredTrap NOTIFICATION-TYPE
OBJECTS {
trpzRadioSSID,
trpzApNum,
trpzApName,
trpzM2UMulticastAddrType,
trpzM2UMulticastAddr
}
STATUS current
DESCRIPTION
"This trap is sent when the multicast to unicast conversion can be
resumed on the AP, after disruption."
::= { trpzTrapsV2 76 }
trpzAutoTuneSuccessTrap NOTIFICATION-TYPE
OBJECTS {
trpzRadioBand,
trpzRadiosTunedCount
}
STATUS current
DESCRIPTION
"This trap is sent when an auto-tune operation completed successfully."
::= { trpzTrapsV2 77 }
trpzAutoTuneFailureTrap NOTIFICATION-TYPE
OBJECTS {
trpzRadioBand,
trpzAutoTuneFailureReason
}
STATUS current
DESCRIPTION
"This trap is sent when an auto-tune operation failed to complete."
::= { trpzTrapsV2 78 }
trpzClientDeAssociationTrap2 NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientVLANName,
trpzClientAuthServerAddrType,
trpzClientAuthServerAddr,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID
}
STATUS current
DESCRIPTION
"This trap is sent if a client de-association occurred.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzApRadioIndex, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
before deassociation;
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoletes trpzClientDeAssociationTrap."
::= { trpzTrapsV2 79 }
trpzClientRoamingTrap2 NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID,
trpzClientRoamedFromAccessMode,
trpzClientRoamedFromPhysPortNum,
trpzClientRoamedFromApNum,
trpzClientRoamedFromRadioIndex,
trpzClientRoamedFromWsAddrType,
trpzClientRoamedFromWsAddr,
trpzClientTimeSinceLastRoam
}
STATUS current
DESCRIPTION
"This trap is sent if a client roams from one location to another.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzApRadioIndex, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client,
after roam;
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client, after roam.
Obsoletes trpzClientRoamingTrap."
::= { trpzTrapsV2 80 }
trpzClientIpAddrChangeTrap2 NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIpAddrType,
trpzClientIpAddr,
trpzClientVLANName,
trpzClientSessionState,
trpzClientAuthServerAddrType,
trpzClientAuthServerAddr,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID,
trpzUserAccessType,
trpzLocalId,
trpzClientIpAddrChangeReason
}
STATUS current
DESCRIPTION
"This trap is sent when an IP address of a client changes.
The most likely cases for this are when the client first
connects to the network and when a new IPv6 global address is
assigned to the client.
The pair of objects trpzClientIpAddrType/trpzClientIpAddr
indicates the type and the value of the new IP address.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzApRadioIndex, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
at the time this trap was sent;
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoletes trpzClientIpAddrChangeTrap."
::= { trpzTrapsV2 81 }
trpzClientDeAuthenticationTrap2 NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientVLANName,
trpzClientAuthServerAddrType,
trpzClientAuthServerAddr,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID
}
STATUS current
DESCRIPTION
"This trap is sent if a client de-authentication occurred.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzApRadioIndex, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
at the time this trap was sent;
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoletes trpzClientDeAuthenticationTrap."
::= { trpzTrapsV2 82 }
trpzClientDynAuthorChangeSuccessTrap2 NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientSessionState,
trpzClientDynAuthorClientAddrType,
trpzClientDynAuthorClientAddr,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID,
trpzUserAccessType,
trpzLocalId,
trpzChangedUserParamOldValues,
trpzChangedUserParamNewValues
}
STATUS current
DESCRIPTION
"This trap is sent when the authorization attributes for a user
are dynamically changed by an authorized dynamic authorization
client.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzApRadioIndex, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
at the time this trap was sent;
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoletes trpzClientDynAuthorChangeSuccessTrap."
::= { trpzTrapsV2 83 }
trpzClientDisconnectTrap2 NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID,
trpzLocalId,
trpzClientDisconnectSource,
trpzClientDisconnectDescription
}
STATUS current
DESCRIPTION
"This trap is sent when a client session is terminated administratively.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzApRadioIndex, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
at the time this trap was sent;
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoletes trpzClientDisconnectTrap."
::= { trpzTrapsV2 84 }
trpzClientClearedTrap3 NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID,
trpzClientSessionElapsedSeconds,
trpzLocalId,
trpzClientClearedReason
}
STATUS current
DESCRIPTION
"This trap is sent when a client session is cleared.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzApRadioIndex, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
at the time this trap was sent;
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoletes trpzClientClearedTrap,
trpzClientClearedTrap2."
::= { trpzTrapsV2 85 }
trpzClientAuthorizationSuccessTrap5 NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientVLANName,
trpzClientSessionState,
trpzClientAuthServerAddrType,
trpzClientAuthServerAddr,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID,
trpzClientRadioType,
trpzUserAccessType,
trpzLocalId,
trpzClientAuthorizationReason
}
STATUS current
DESCRIPTION
"This trap is sent when a client authorizes.
If trpzClientAccessMode = 'ap':
trpzApNum, trpzApRadioIndex, trpzRadioSSID
identify the AP/radio/BSS providing wireless service to this client
at the time this trap was sent;
trpzClientRadioType gives the type of radio used by this client.
If trpzClientAccessMode = 'wired':
trpzPhysPortNum identifies the physical port on the AC
used by this wired-auth client.
Obsoletes trpzClientAuthorizationSuccessTrap,
trpzClientAuthorizationSuccessTrap2,
trpzClientAuthorizationSuccessTrap3,
trpzClientAuthorizationSuccessTrap4."
::= { trpzTrapsV2 86 }
trpzClientDeviceTypeChangeTrap NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientDeviceType,
trpzClientDeviceTypeOld,
trpzClientDeviceGroup,
trpzClientDeviceProfileName,
trpzClientVLANName,
trpzClientSessionState,
trpzClientAuthServerAddrType,
trpzClientAuthServerAddr,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID,
trpzUserAccessType,
trpzLocalId
}
STATUS current
DESCRIPTION
"This trap is sent when the detected device type
of a client changes.
The new device type is indicated by trpzClientDeviceType.
trpzClientDeviceGroup indicates the group that
the new device type belongs to.
As of release 8.0, device detection is done only for
wireless clients (trpzClientAccessMode = 'ap')."
::= { trpzTrapsV2 87 }
trpzClientDeviceProfileChangeTrap NOTIFICATION-TYPE
OBJECTS {
trpzUserName,
trpzClientSessionId,
trpzClientMACAddress,
trpzClientIPv4Addr,
trpzClientIPv6LinkLocalAddr,
trpzClientDeviceType,
trpzClientDeviceGroup,
trpzClientDeviceProfileName,
trpzClientDeviceProfileNameOld,
trpzClientDeviceProfileChangeReason,
trpzClientVLANName,
trpzClientSessionState,
trpzClientAuthServerAddrType,
trpzClientAuthServerAddr,
trpzClientAuthenProtocolType,
trpzClientAccessMode,
trpzPhysPortNum,
trpzApNum,
trpzApRadioIndex,
trpzRadioSSID,
trpzUserAccessType,
trpzLocalId
}
STATUS current
DESCRIPTION
"This trap is sent when the device profile for
a client device changes.
The new device profile is indicated by trpzClientDeviceProfileName.
trpzClientDeviceProfileChangeReason indicates the reason
why the device profile changed.
As of release 8.0, device detection is done only for
wireless clients (trpzClientAccessMode = 'ap')."
::= { trpzTrapsV2 88 }
END
View Git Blame Copy Permalink