644 lines
24 KiB
Plaintext
644 lines
24 KiB
Plaintext
TRAPEZE-NETWORKS-AP-TC DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Unsigned32, Integer32, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
trpzMibs
|
|
FROM TRAPEZE-NETWORKS-ROOT-MIB;
|
|
|
|
|
|
trpzApTc MODULE-IDENTITY
|
|
LAST-UPDATED "201110050232Z"
|
|
ORGANIZATION "Trapeze Networks"
|
|
CONTACT-INFO
|
|
"Trapeze Networks Technical Support
|
|
www.trapezenetworks.com
|
|
US: 866.TRPZ.TAC
|
|
International: 925.474.2400
|
|
support@trapezenetworks.com"
|
|
DESCRIPTION
|
|
"Textual Conventions used by Trapeze Networks wireless switches.
|
|
|
|
AP = Access Point;
|
|
AC = Access Controller (wireless switch),
|
|
the device that runs a SNMP Agent using these TCs.
|
|
|
|
Copyright 2006-2011 Trapeze Networks, Inc.
|
|
All rights reserved.
|
|
This Trapeze Networks SNMP Management Information Base
|
|
Specification (Specification) embodies Trapeze Networks'
|
|
confidential and proprietary intellectual property.
|
|
Trapeze Networks retains all title and ownership in
|
|
the Specification, including any revisions.
|
|
|
|
This Specification is supplied 'AS IS' and Trapeze Networks
|
|
makes no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the Specification."
|
|
|
|
REVISION "201110050232Z"
|
|
DESCRIPTION "v2.3.2: New AP state (enum value in TrpzApState):
|
|
'redundant(10)'.
|
|
New AP transitions (enum values in TrpzApTransition):
|
|
'setBackupConn(10)',
|
|
'startHandoverReconfiguring(11)'.
|
|
(for 7.6 release)"
|
|
|
|
REVISION "201101280220Z"
|
|
DESCRIPTION "v2.2.0: Added eight new AP Radio 11n transmission rates,
|
|
MCS 16 to MCS 23 (enum values in TrpzRadioRateEx).
|
|
(for 7.5 release)"
|
|
|
|
REVISION "201101280210Z"
|
|
DESCRIPTION "v2.1.0: Added fail detail value 'adminRequest(92)'
|
|
(for 7.5 release)"
|
|
|
|
REVISION "201011300201Z"
|
|
DESCRIPTION "v2.0.1: Extending the AP state machine model for
|
|
the WAN Outage feature:
|
|
New AP state (enum value in TrpzApState):
|
|
'connOutage(20)'.
|
|
New AP transitions (enum values in TrpzApTransition):
|
|
'connLost(20)',
|
|
'connRestored(21)',
|
|
'connOutageExtendedTimeout(22)'.
|
|
|
|
Renamed AP state (7) from 'configured' to 'operational'
|
|
to make clear how it is related to the AP Status traps:
|
|
AP Non-Operational Status (trpzApNonOperStatusTrap) and
|
|
AP Operational - Radio Status (trpzApOperRadioStatusTrap).
|
|
|
|
(for 7.5 release)"
|
|
|
|
REVISION "201011290131Z"
|
|
DESCRIPTION "v1.8.1: Added Crypto Type enum value 'sms4(8)'
|
|
(for 7.5 release)"
|
|
|
|
REVISION "200907210103Z"
|
|
DESCRIPTION "v1.5.3: Introduced TCs:
|
|
TrpzApPowerMode,
|
|
TrpzRadioAntennaLocation,
|
|
TrpzApLedMode
|
|
(for 7.1 release)"
|
|
|
|
REVISION "200812020101Z"
|
|
DESCRIPTION "v1.5.1: Added bias value 'sticky(3)'
|
|
(for 7.1 release)"
|
|
|
|
REVISION "200811270100Z"
|
|
DESCRIPTION "v1.5.0: Introduced a new Radio identifier,
|
|
not limited to two radios per AP:
|
|
TrpzApRadioIndex and TrpzApRadioIndexOrZero
|
|
(for 7.1 release)"
|
|
|
|
REVISION "200811260051Z"
|
|
DESCRIPTION "v1.4.1: Removed range from 'TrpzPowerLevel'
|
|
(it was wrong already: too small,
|
|
maximum power is at least 23, not 18).
|
|
Added format where needed (DISPLAY-HINT).
|
|
This will be published in 7.1 release."
|
|
|
|
REVISION "200810060050Z"
|
|
DESCRIPTION "v1.4.0: Introduced TrpzRadioRateEx
|
|
(for 7.1 release)"
|
|
|
|
REVISION "200805070041Z"
|
|
DESCRIPTION "v1.3.1: Introduced TrpzCryptoType
|
|
(for 7.0 release)"
|
|
|
|
REVISION "200802140032Z"
|
|
DESCRIPTION "v1.2.2: In order to support 802.11n,
|
|
added radio types NA, NG and introduced
|
|
TrpzRadioChannelWidth,
|
|
TrpzRadioMimoState
|
|
(for 7.0 release)"
|
|
|
|
REVISION "200712030030Z"
|
|
DESCRIPTION "v1.2.0: Obsoleted TrpzRadioEnable and TrpzApPortOrDapNum
|
|
(previously deprecated).
|
|
This will be published in 7.0 release."
|
|
|
|
REVISION "200707060023Z"
|
|
DESCRIPTION "v1.1.3: Introduced TrpzRadioMode
|
|
in order to replace TrpzRadioEnable
|
|
(in 6.2, a new administrative mode 'sentry' was added)"
|
|
|
|
REVISION "200707050022Z"
|
|
DESCRIPTION "v1.1.2: Introduced TrpzApNum
|
|
in order to replace TrpzApPortOrDapNum.
|
|
(In 6.0, direct- and network-attached APs were unified.)"
|
|
|
|
REVISION "200607100015Z"
|
|
DESCRIPTION "v1.0.1: Disallow illegal TrpzRadioRate values 1..9
|
|
while keeping zero (that means unknown rate)"
|
|
|
|
REVISION "200603300014Z"
|
|
DESCRIPTION "v1.0: Initial version, for 4.1 release"
|
|
|
|
::= { trpzMibs 3 }
|
|
|
|
|
|
TrpzAccessType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the access type used by client or an AP.
|
|
Value 'ap(1)' indicates access point that is
|
|
directly attached to the switch.
|
|
Value 'dap(2)' indicates distributed access point
|
|
with attachment to the switch through the intermediate
|
|
network.
|
|
Value 'wired(3)' indicates a client that is directly
|
|
attached to the switch (no access point is involved)."
|
|
SYNTAX INTEGER {
|
|
ap (1),
|
|
dap (2),
|
|
wired (3)
|
|
}
|
|
|
|
TrpzApAttachType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of AP attachment to AC."
|
|
SYNTAX INTEGER {
|
|
directAttach(1), -- informally known as "AP"
|
|
networkAttach(2) -- informally known as "DAP"
|
|
}
|
|
|
|
TrpzApPortOrDapNum ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"AP Port, for directly attached APs, otherwise DAP Number
|
|
(arbitrary number assigned when configuring the DAP on the AC).
|
|
A zero value means unknown.
|
|
Obsoleted by TrpzApNum.
|
|
(In 6.0, direct- and network-attached APs were unified.)"
|
|
SYNTAX Unsigned32 (0..1000)
|
|
|
|
TrpzApNum ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP Number: arbitrary number assigned when configuring
|
|
the AP on the AC. It is unique (on same AC),
|
|
regardless of the type of AP attachment.
|
|
A zero value means unknown."
|
|
SYNTAX Unsigned32 (0..9999)
|
|
|
|
TrpzApState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP State, as seen by the AC."
|
|
SYNTAX INTEGER {
|
|
cleared (1),
|
|
init (2),
|
|
bootStarted (3),
|
|
imageDownloaded (4),
|
|
connectFailed (5),
|
|
configuring (6),
|
|
operational (7),
|
|
redundant (10),
|
|
connOutage (20)
|
|
}
|
|
|
|
TrpzApTransition ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP state Transition, as seen by the AC.
|
|
Usually reported via 'trpzApNonOperStatusTrap'.
|
|
|
|
Transition to operational state is reported by
|
|
'trpzApOperRadioStatusTrap' (multiple PDUs may be sent,
|
|
one for each radio of that AP).
|
|
|
|
Another transition to operational state is 'connRestored(21)',
|
|
which may not be followed by 'trpzApOperRadioStatusTrap'
|
|
unless radio status also changed."
|
|
SYNTAX INTEGER {
|
|
clear (1),
|
|
timeout (2),
|
|
reset (3),
|
|
bootSuccess (4),
|
|
startConfiguring (5),
|
|
connectFail (6),
|
|
setBackupConn (10),
|
|
startHandoverReconfiguring (11),
|
|
connLost (20),
|
|
connRestored (21),
|
|
connOutageExtendedTimeout (22)
|
|
}
|
|
|
|
TrpzApFailDetail ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Detailed failure codes for some of the transitions
|
|
specified in 'TrpzApTransition'.
|
|
- 'normalTransition' (91) means
|
|
the corresponding transition is not a failure;
|
|
it is a transition towards operational state
|
|
or it is an internally required transition
|
|
(for example, a major configuration change occurred,
|
|
like cluster being enabled).
|
|
- 'adminRequest' (92) means
|
|
the corresponding transition is not a failure,
|
|
it was caused by an administrative request; for example,
|
|
AP was cleared (removed from the switch configuration).
|
|
- 'failUnknown' (99) means there are no details available;
|
|
the transition may be normal or undesirable/unexpected."
|
|
SYNTAX INTEGER {
|
|
-- Detail code values for 'configFailed' transition.
|
|
-- All 3 below cover 'trpzDAPConnectWarningTrap' trap.
|
|
secureHandshakeFailure (2),
|
|
fingerprintRequired (3),
|
|
fingerprintMismatch (4),
|
|
|
|
-- Detail code values for 'timeout' transition.
|
|
-- Reports the state of the physical AC port
|
|
-- this AP is attached to.
|
|
-- For RM, it would cover the information
|
|
-- given by the standard "Port Link Up/Down" traps.
|
|
portLinkUp (11),
|
|
portLinkDown (12),
|
|
|
|
normalTransition (91),
|
|
adminRequest (92),
|
|
failUnknown (99)
|
|
}
|
|
|
|
TrpzApConnectSecurityType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Security level of the connection between AP and AC:
|
|
secure(1) - fingerprint matching;
|
|
insecure(2) - fingerprint not configured,
|
|
or optional and not matching;
|
|
auto(3) - Auto-DAP is intrinsically insecure:
|
|
could not check fingerprint since
|
|
no specific DAP is configured."
|
|
SYNTAX INTEGER {
|
|
secure (1),
|
|
insecure (2),
|
|
auto (3)
|
|
}
|
|
|
|
TrpzApServiceAvailability ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Level of wireless service availability."
|
|
SYNTAX INTEGER {
|
|
fullService (1),
|
|
-- All radios operational on the AP.
|
|
noService (2),
|
|
-- No radio operational on the AP.
|
|
degradedService (3)
|
|
-- One radio down, one radio up.
|
|
}
|
|
|
|
TrpzApBias ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bias of AP attachment to this AC.
|
|
Setting an APs bias on an AC switch to high causes the switch
|
|
to be preferred over switches with low bias,
|
|
for booting and managing the AP.
|
|
Bias applies only to AC switches that are indirectly attached
|
|
to the AP through an intermediate Layer 2 or Layer 3 network.
|
|
An AP always attempts to boot on AP port 1 first,
|
|
and if an AC switch is directly attached on AP port 1,
|
|
the AP boots from it regardless of the bias settings."
|
|
SYNTAX INTEGER {
|
|
high(1),
|
|
low(2),
|
|
sticky(3)
|
|
}
|
|
|
|
TrpzApSerialNum ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "255a"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value is a zero length string if unknown or unavailable.
|
|
Otherwise the value is a serial number, which consists
|
|
of printable ASCII characters between 0x21 (!),
|
|
and 0x7d (}) with no leading, embedded, or trailing space."
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
|
|
TrpzApFingerprint ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "2x:"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents a RSA key fingerprint (binary value),
|
|
which is the MD5 hash of the public key of the RSA key pair.
|
|
Or a zero length string if not known or unavailable."
|
|
SYNTAX OCTET STRING (SIZE (0 | 16))
|
|
|
|
TrpzRadioNum ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumeration for multi-radio APs."
|
|
SYNTAX INTEGER {
|
|
radio-1 (1),
|
|
radio-2 (2),
|
|
not-applicable (3)
|
|
}
|
|
|
|
|
|
TrpzApRadioIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each Radio on the AP.
|
|
Intended to replace TrpzRadioNum."
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
|
|
TrpzApRadioIndexOrZero ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention is an extension of the
|
|
TrpzApRadioIndex convention.
|
|
The latter defines a greater than zero value used to identify
|
|
each Radio on the AP.
|
|
This extension permits the additional value of zero.
|
|
A zero value means 'none', 'unknown radio' or 'not applicable'.
|
|
Each object using this textual convention should document
|
|
the meaning of Radio Index zero."
|
|
SYNTAX Unsigned32 (0 | 1..4294967295)
|
|
|
|
|
|
TrpzPowerLevel ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current level of transmit power expressed in dbm."
|
|
SYNTAX Unsigned32
|
|
|
|
TrpzRadioPowerChangeType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations for why the power level was changed,
|
|
which occurs due to auto-tune operation."
|
|
SYNTAX INTEGER {
|
|
dup-pkts-threshold-exceed (1),
|
|
retransmit-threshold-exceed (2),
|
|
clients-optimal-performance-reached (3),
|
|
def-power-threshold-exceed (4)
|
|
}
|
|
|
|
TrpzChannelChangeType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations for why the channel was changed, which
|
|
occurs due to auto-tune operation"
|
|
SYNTAX INTEGER {
|
|
util-index (1),
|
|
rexmit-pkt-offset (2),
|
|
noise-offset (3),
|
|
noise (4),
|
|
utilization (5),
|
|
phy-error-offset (6),
|
|
crc-errors-offset (7),
|
|
radar-detected (8)
|
|
}
|
|
|
|
TrpzChannelNum ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel Number"
|
|
SYNTAX Unsigned32 (1..1024)
|
|
|
|
TrpzRadioEnable ::= TEXTUAL-CONVENTION
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Radio mode (administratively enabled or disabled).
|
|
Obsoleted by TrpzRadioMode."
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
|
|
TrpzRadioMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configured mode of an AP radio.
|
|
There are three administratively controlled values:
|
|
- enabled: radio may provide service to clients;
|
|
- sentry: radio will not provide service,
|
|
but can be used for RF scanning
|
|
and can run countermeasures;
|
|
- disabled: radio will not emit at all
|
|
(thus cannot run countermeasures),
|
|
can only be used for RF scanning.
|
|
Obsoletes TrpzRadioEnable."
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2),
|
|
sentry (3)
|
|
}
|
|
|
|
TrpzRadioConfigState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio Configuration State, as seen by the AC."
|
|
SYNTAX INTEGER {
|
|
configInit (1),
|
|
configFail (2),
|
|
configOk (3)
|
|
}
|
|
|
|
TrpzRadioRate ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d-1"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The possible transmission rates of an AP radio.
|
|
Both a and b/g rates are covered; a specific radio will report
|
|
the applicable transmission rates (either a or b/g).
|
|
Here are the possible rates, in Mbps:
|
|
- 802.11g radios: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, or 1;
|
|
- 802.11b radios: 11, 5.5, 2, or 1;
|
|
- 802.11a radios: 54, 48, 36, 24, 18, 12, 9, or 6.
|
|
The value in MIB is specified as the rate in Mbps times 10,
|
|
in order to have only integer values, zero meaning unknown rate."
|
|
SYNTAX Unsigned32 (0 | 10..540)
|
|
|
|
TrpzRadioRateEx ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio Rates Extended (covering 11n MCS rates):
|
|
The possible transmission rates of an AP radio.
|
|
11a, 11b/g, 11na and 11ng rates are included;
|
|
a specific radio will report
|
|
the applicable transmission rates (either a, b/g, na, ng).
|
|
Here are the possible rates, in Mbps:
|
|
- 802.11g radios: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, or 1;
|
|
- 802.11b radios: 11, 5.5, 2, or 1;
|
|
- 802.11a radios: 54, 48, 36, 24, 18, 12, 9, or 6;
|
|
- 802.11ng radios: MCS0-MCS15 and all 11g rates;
|
|
- 802.11na radios: MCS0-MCS15 and all 11a rates."
|
|
SYNTAX INTEGER {
|
|
rateUnknown (1),
|
|
|
|
rate1 (2), -- standard 1 Mbps rate
|
|
rate2 (3), -- standard 2 Mbps rate
|
|
rate5-5 (4), -- standard 5.5 Mbps rate
|
|
rate6 (5), -- standard 6 Mbps rate
|
|
rate9 (6), -- standard 9 Mbps rate
|
|
rate11 (7), -- standard 11 Mbps rate
|
|
rate12 (8), -- standard 12 Mbps rate
|
|
rate18 (9), -- standard 18 Mbps rate
|
|
rate24 (10), -- standard 24 Mbps rate
|
|
rate36 (11), -- standard 36 Mbps rate
|
|
rate48 (12), -- standard 48 Mbps rate
|
|
rate54 (13), -- standard 54 Mbps rate
|
|
|
|
rateMCS0 (20), -- Modulation Coding Scheme 0
|
|
rateMCS1 (21), -- Modulation Coding Scheme 1
|
|
rateMCS2 (22), -- Modulation Coding Scheme 2
|
|
rateMCS3 (23), -- Modulation Coding Scheme 3
|
|
rateMCS4 (24), -- Modulation Coding Scheme 4
|
|
rateMCS5 (25), -- Modulation Coding Scheme 5
|
|
rateMCS6 (26), -- Modulation Coding Scheme 6
|
|
rateMCS7 (27), -- Modulation Coding Scheme 7
|
|
rateMCS8 (28), -- Modulation Coding Scheme 8
|
|
rateMCS9 (29), -- Modulation Coding Scheme 9
|
|
rateMCS10 (30), -- Modulation Coding Scheme 10
|
|
rateMCS11 (31), -- Modulation Coding Scheme 11
|
|
rateMCS12 (32), -- Modulation Coding Scheme 12
|
|
rateMCS13 (33), -- Modulation Coding Scheme 13
|
|
rateMCS14 (34), -- Modulation Coding Scheme 14
|
|
rateMCS15 (35), -- Modulation Coding Scheme 15
|
|
rateMCS16 (36), -- Modulation Coding Scheme 16
|
|
rateMCS17 (37), -- Modulation Coding Scheme 17
|
|
rateMCS18 (38), -- Modulation Coding Scheme 18
|
|
rateMCS19 (39), -- Modulation Coding Scheme 19
|
|
rateMCS20 (40), -- Modulation Coding Scheme 20
|
|
rateMCS21 (41), -- Modulation Coding Scheme 21
|
|
rateMCS22 (42), -- Modulation Coding Scheme 22
|
|
rateMCS23 (43) -- Modulation Coding Scheme 23
|
|
}
|
|
|
|
TrpzRadioType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumeration to indicate the Radio Type, as seen by AC."
|
|
SYNTAX INTEGER {
|
|
typeUnknown (1),
|
|
typeA (2), -- 802.11a
|
|
typeB (3), -- 802.11b
|
|
typeG (4), -- 802.11b+g
|
|
typeNA (5), -- 802.11n
|
|
typeNG (6) -- 802.11n
|
|
}
|
|
|
|
TrpzRssi ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RSSI (Received Signal Strength Indicator) for last packet
|
|
received, in decibels referred to 1 milliwatt (dBm).
|
|
A higher value indicates a stronger signal."
|
|
SYNTAX Integer32 (-100..0)
|
|
|
|
TrpzApWasOperational ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumeration to indicate whether the AP was operational
|
|
before a transition occurred. Normally used in notifications."
|
|
SYNTAX INTEGER {
|
|
oper (1),
|
|
nonOper (2)
|
|
}
|
|
|
|
TrpzRadioChannelWidth ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumeration to indicate the administratively controlled
|
|
Radio Channel Width."
|
|
SYNTAX INTEGER {
|
|
channelWidth20MHz (1),
|
|
channelWidth40MHz (2)
|
|
}
|
|
|
|
TrpzRadioMimoState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumeration to indicate the MIMO state of the Radio
|
|
(Multiple Input Multiple Output), as seen by the AC.
|
|
This depends on radio type and power supplied to the radio.
|
|
mimo1x1:
|
|
radio uses one transmit chain and one receive chain;
|
|
mimo2x3:
|
|
radio uses two transmit chains and three receive chains;
|
|
mimo3x3:
|
|
radio uses three transmit chains and three receive chains."
|
|
SYNTAX INTEGER {
|
|
mimoOther (1),
|
|
mimo1x1 (2),
|
|
mimo2x3 (3),
|
|
mimo3x3 (4)
|
|
}
|
|
|
|
TrpzApPowerMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumerations of the modes in which power is supplied
|
|
by the AP to its components (mainly radios).
|
|
There are two administratively controlled values:
|
|
- auto: the power is managed automatically by sensing
|
|
the power level on the AP;
|
|
- high: all radios operate at the maximum power available."
|
|
SYNTAX INTEGER {
|
|
auto (1),
|
|
high (2)
|
|
}
|
|
|
|
TrpzApLedMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumeration to indicate the administratively controlled
|
|
LED mode for an AP."
|
|
SYNTAX INTEGER {
|
|
auto (1),
|
|
static (2),
|
|
off (3)
|
|
}
|
|
|
|
TrpzRadioAntennaLocation ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumeration to indicate the administratively controlled
|
|
Radio Antenna Location."
|
|
SYNTAX INTEGER {
|
|
indoors (1),
|
|
outdoors (2)
|
|
}
|
|
|
|
TrpzCryptoType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enumeration of Crypto Types:
|
|
- clear:
|
|
Cleartext (unencrypted communication);
|
|
- wep: Wired Equivalent Privacy;
|
|
- wep40:
|
|
WEP with 40-bit keys;
|
|
- wep104:
|
|
WEP with 104-bit keys;
|
|
- tkip:
|
|
Temporal Key Integrity Protocol;
|
|
- aesCcmp:
|
|
Advanced Encryption Standard, Counter mode with CBC MAC Protocol."
|
|
SYNTAX INTEGER {
|
|
other (1),
|
|
clear (2),
|
|
wep (3),
|
|
wep40 (4),
|
|
wep104 (5),
|
|
tkip (6),
|
|
aesCcmp (7),
|
|
sms4 (8)
|
|
}
|
|
|
|
END
|