WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/trapeze/TRAPEZE-NETWORKS-AP-CONFIG-MIB

4691 lines
169 KiB
Plaintext
Raw Permalink Blame History

TRAPEZE-NETWORKS-AP-CONFIG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
TrpzApNum, TrpzApAttachType, TrpzApSerialNum,
TrpzApFingerprint, TrpzApBias,
TrpzApRadioIndex, TrpzRadioMode, TrpzRadioType,
TrpzPowerLevel, TrpzChannelNum,
TrpzRadioChannelWidth, TrpzApPowerMode,
TrpzRadioAntennaLocation, TrpzApLedMode
FROM TRAPEZE-NETWORKS-AP-TC
TrpzSyslogSeverity
FROM TRAPEZE-NETWORKS-EXTERNAL-SERVER-TC
TrpzPhysPortNumberOrZero
FROM TRAPEZE-NETWORKS-BASIC-TC
trpzMibs
FROM TRAPEZE-NETWORKS-ROOT-MIB;
trpzApConfigMib MODULE-IDENTITY
LAST-UPDATED "201306210324Z"
ORGANIZATION "Trapeze Networks"
CONTACT-INFO
"Trapeze Networks Technical Support
www.trapezenetworks.com
US: 866.TRPZ.TAC
International: 925.474.2400
support@trapezenetworks.com"
DESCRIPTION
"AP Configuration objects for Trapeze Networks wireless switches.
AP = Access Point;
AC = Access Controller (wireless switch),
the device that runs a SNMP Agent implementing this MIB.
Copyright 2009-2013 Trapeze Networks, Inc.
All rights reserved.
This Trapeze Networks SNMP Management Information Base
Specification (Specification) embodies Trapeze Networks'
confidential and proprietary intellectual property.
Trapeze Networks retains all title and ownership in
the Specification, including any revisions.
This Specification is supplied 'AS IS' and Trapeze Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
REVISION "201306210324Z"
DESCRIPTION "v3.2.4: Obsoleted two objects (not supported anymore):
trpzApConfRadioConfigAutoTuneMaxTxPower,
trpzApConfApTemRadioConfAutoTuneMaxTxPower.
(for 9.0 release)"
REVISION "201212210323Z"
DESCRIPTION "v3.2.3: New backup SSID mode
(enum value in TrpzBackupSsidMode):
'always-on(4)'.
Added seven columnar objects:
trpzApConfApConfigCacheConfigEnabled,
trpzApConfRemoteSiteAcPollingEnabled,
trpzApConfRemoteSiteRadiusServerGroupName,
trpzApConfRemoteSiteRadiusDeadtime,
trpzApConfRemoteSiteRadiusTimeout,
trpzApConfRemoteSiteRadiusRetransmit,
trpzApConfRemoteSiteRadiusNasIdType;
and one related TC:
TrpzApRadiusNasIdType.
(for 9.0 release)"
REVISION "201210160322Z"
DESCRIPTION "v3.2.2: Added three tables:
trpzApConfRadioProfile32Table,
trpzApConfRadioProf32ServiceProfileTable,
trpzApConfRadioProf32SnoopFilterTable;
in order to replace:
trpzApConfRadioProfileTable,
trpzApConfRadioProfServiceProfileTable,
trpzApConfRadioProfSnoopFilterTable;
three columnar objects:
trpzApConfApConfigApName2,
trpzApConfRadioConfigRadioProfileName2,
trpzApConfApTemRadioConfRadioProfileName2;
in order to replace:
trpzApConfApConfigApName,
trpzApConfRadioConfigRadioProfileName,
trpzApConfApTemRadioConfRadioProfileName;
a columnar object in the deprecated Radio Profile table,
to indicate the corresponding entry in the new table:
trpzApConfRadioProfRadioProfileFullName;
and a related TC:
TrpzRadioProfileName32;
in order to replace:
TrpzRadioProfileName.
(for 9.0 release)"
REVISION "201208060313Z"
DESCRIPTION "v3.1.3: Obsoleted five objects (not supported anymore):
trpzApConfRadioProfAutoTune11aChannelRange,
trpzApConfRadioProfAutoTuneIgnoreClientsEnabled,
trpzApConfRadioProfAutoTuneChannelEnabled,
trpzApConfRadioProfAutoTuneChannelHolddownInterval,
trpzApConfRadioProfAutoTuneChannelChangeInterval;
and a related TC:
TrpzRadioProfileAutoTuneChannelRange.
(for 8.0 release)"
REVISION "201208050302Z"
DESCRIPTION "v3.0.2: Updated the description of
trpzApConfServProfM2UConversionEnabled
to reflect the fact that multicast to unicast conversion
is performed for all multicast IPv4 traffic, not just
video traffic.
This will be published in 7.7 MR2 release."
REVISION "201203080301Z"
DESCRIPTION "v3.0.1: Added three tables:
trpzApConfRadioSnoopFilterTable,
trpzApConfSnoopObserverTable,
trpzApConfRemoteSiteTable;
ten columnar objects:
trpzApConfApConfigRemoteSiteName,
trpzApConfApConfigPathMtu,
trpzApConfApConfigHighLatencyModeEnabled,
trpzApConfServProfBackupSsidMode,
trpzApConfServProfBackupSsidTimeout,
trpzApConfServProfBackupSsidKeepClients,
trpzApConfServProfM2UConversionEnabled,
trpzApConfServProfWebPortalLogoutForm,
trpzApConfSnoopFilterObserverAddrType,
trpzApConfSnoopFilterObserverAddr;
and two related TCs:
TrpzBackupSsidMode,
TrpzSnoopObserverTxMode.
(for 7.7 release)"
REVISION "201102030200Z"
DESCRIPTION "v2.0.0: Added 11 objects and related TCs:
trpzApConfApConfigLldpMode,
trpzApConfApConfigLldpMedEnabled,
trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected,
trpzApConfApConfigLldpMedInventoryTlvSelected,
trpzApConfApConfigApTunnelEnabled,
trpzApConfApConfigDataSecurityEnabled,
trpzApConfApConfigWanOutageModeEnabled,
trpzApConfApConfigWanOutageExtendedTimeout,
trpzApConfApConfigWanOutageEvaluationPeriod,
trpzApConfRadioProfRFSpectralScanModeEnabled,
trpzApConfRadioProfRFSpectralScanPriority.
Obsoleted four objects (not supported anymore):
trpzApConfServProfWpaIeCipherWep40Enabled,
trpzApConfServProfWpaIeCipherWep104Enabled,
trpzApConfServProfRsnIeCipherWep40Enabled,
trpzApConfServProfRsnIeCipherWep104Enabled.
(for 7.5 release)"
REVISION "201003050121Z"
DESCRIPTION "v1.2.1: made a few objects writable:
trpzApConfRadioProfBeaconInterval,
trpzApConfRadioProfRtsThreshold,
trpzApConfRadioProfFragThreshold
(for 7.5 release)"
REVISION "200911190108Z"
DESCRIPTION "v1.0.8: Initial version, for 7.1 release"
::= { trpzMibs 14 }
-- Textual conventions
TrpzApTemplateName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"AP Template Name, consists of printable ASCII characters
between 0x21 (!), and 0x7d (}) with no leading, embedded,
or trailing space.
Cannot be a zero length string."
SYNTAX OCTET STRING (SIZE (1..32))
TrpzRadioProfileName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS deprecated
DESCRIPTION
"Radio Profile Name, consists of printable ASCII characters
between 0x21 (!), and 0x7e (~) with no leading, embedded,
or trailing space.
Cannot be a zero length string.
Deprecated by TrpzRadioProfileName32, which allows
Radio Profile Names up to 32 characters long.
Radio Profile Names longer than 16 characters will be truncated,
last four characters will be replaced by tilde (~) and three digits.
Example:
'12345678901234567890' will appear as '123456789012~001'
'12345678901234569999' will appear as '123456789012~002'
etc.
In case of a name collision, for example if '123456789012~002'
is the full name of another Radio Profile, the next available
three-digit suffix will be used:
'12345678901234569999' will appear as '123456789012~003' instead."
SYNTAX OCTET STRING (SIZE (1..16))
TrpzServiceProfileName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Service Profile Name, consists of printable ASCII characters
between 0x21 (!), and 0x7d (}) with no leading, embedded,
or trailing space.
Cannot be a zero length string."
SYNTAX OCTET STRING (SIZE (1..32))
TrpzSnoopFilterName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Snoop Filter Name, consists of printable ASCII characters
between 0x21 (!), and 0x7d (}) with no leading, embedded,
or trailing space.
Cannot be a zero length string."
SYNTAX OCTET STRING (SIZE (1..15))
TrpzServiceProfileSsidType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Service Types provided on a service profile."
SYNTAX INTEGER {
clear (1),
crypto (2)
}
TrpzServiceProfile11nMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of 802.11n modes for a service profile."
SYNTAX INTEGER {
enable (1),
disable (2),
required (3)
}
TrpzServiceProfile11nFrameAggregationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of 802.11n frame aggregation types
for a service profile."
SYNTAX INTEGER {
msdu (1),
mpdu (2),
all (3),
disable (4)
}
TrpzServiceProfile11nMsduMaxLength ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of 802.11n A-MSDU maximum lengths
for a service profile."
SYNTAX INTEGER {
msdu-4k (1),
msdu-8k (2)
}
TrpzServiceProfile11nMpduMaxLength ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of 802.11n A-MPDU maximum lengths
for a service profile."
SYNTAX INTEGER {
mpdu-8k (1),
mpdu-16k (2),
mpdu-32k (3),
mpdu-64k (4)
}
TrpzServiceProfileAuthFallthruType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Authentication Fallthrough types
for a service profile."
SYNTAX INTEGER {
none (1),
web-auth (2),
web-aaa-portal (3),
last-resort (4)
}
TrpzServiceProfileCacMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Call Admission Control types
for a service profile."
SYNTAX INTEGER {
none (1),
session (2),
vendor (3)
}
TrpzRadioProfileCountermeasuresMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of the Countermeasure modes for a radio profile."
SYNTAX INTEGER {
none (1),
all (2),
rogue (3),
configured (4)
}
TrpzRadioProfileRFScanChannelScope ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of RF scanning channel scopes
for a radio profile."
SYNTAX INTEGER {
operating (1),
regulatory (2),
all (3)
}
TrpzRadioProfileAutoTuneChannelRange ::= TEXTUAL-CONVENTION
STATUS obsolete
DESCRIPTION
"Enumeration of Auto-Tune channel ranges
for a radio profile.
Obsoleted: not supported anymore."
SYNTAX INTEGER {
all-bands (1),
lower-bands (2)
}
TrpzRadioProfileRFScanMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of RF scanning modes for a radio profile."
SYNTAX INTEGER {
active (1),
passive (2)
}
TrpzApLldpMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of LLDP modes for an AP."
SYNTAX INTEGER {
disabled (1),
tx (2)
}
TrpzRadioProfileRFSpectralScanPriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of Spectral Scan Priorities for a radio profile."
SYNTAX INTEGER {
data-first (1),
scan-first (2)
}
TrpzBackupSsidMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of remote-site backup SSID modes."
SYNTAX INTEGER {
disabled (1),
outage-only (2),
dual (3),
always-on (4)
}
TrpzSnoopObserverTxMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of transmission modes for snoop packets."
SYNTAX INTEGER {
tzsp (1),
batched-tzsp (2)
}
TrpzRadioProfileName32 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Radio Profile Name, consists of printable ASCII characters
between 0x21 (!), and 0x7e (~) with no leading, embedded,
or trailing space.
Cannot be a zero length string.
Deprecates TrpzRadioProfileName."
SYNTAX OCTET STRING (SIZE (1..32))
TrpzApRadiusNasIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enumeration of NAS-ID values for
the RADIUS server group of a remote site."
SYNTAX INTEGER {
ap-name (1),
ap-serial-id (2)
}
--
-- The AP Config MIB Tree
--
trpzApConfigMibObjects OBJECT IDENTIFIER ::= { trpzApConfigMib 1 }
-- Reserved for future scalar objects (high-level configuration info):
-- trpzApConfigGlobalObjects OBJECT IDENTIFIER ::= { trpzApConfigMibObjects 1 }
-- Object definitions
-- ==================================
-- AP Config table
trpzApConfApConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfApConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing all the APs currently configured
on this AC."
::= { trpzApConfigMibObjects 2 }
trpzApConfApConfigEntry OBJECT-TYPE
SYNTAX TrpzApConfApConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular AP that could be attached to the AC."
INDEX { trpzApConfApConfigApNum }
::= { trpzApConfApConfigTable 1 }
TrpzApConfApConfigEntry ::= SEQUENCE {
trpzApConfApConfigApNum TrpzApNum,
trpzApConfApConfigApAttachType TrpzApAttachType,
trpzApConfApConfigPhysPortNum TrpzPhysPortNumberOrZero,
trpzApConfApConfigApSerialNum TrpzApSerialNum,
trpzApConfApConfigApModelName DisplayString,
trpzApConfApConfigFingerprint TrpzApFingerprint,
trpzApConfApConfigBias TrpzApBias,
trpzApConfApConfigApTimeout Unsigned32,
trpzApConfApConfigApName DisplayString,
trpzApConfApConfigContact DisplayString,
trpzApConfApConfigLocation DisplayString,
trpzApConfApConfigBlinkEnabled TruthValue,
trpzApConfApConfigForceImageDownloadEnabled TruthValue,
trpzApConfApConfigFirmwareUpgradeEnabled TruthValue,
trpzApConfApConfigLocalSwitchingEnabled TruthValue,
trpzApConfApConfigPowerMode TrpzApPowerMode,
trpzApConfApConfigLedMode TrpzApLedMode,
trpzApConfApConfigDescription DisplayString,
trpzApConfApConfigLldpMode TrpzApLldpMode,
trpzApConfApConfigLldpMedEnabled TruthValue,
trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected TruthValue,
trpzApConfApConfigLldpMedInventoryTlvSelected TruthValue,
trpzApConfApConfigApTunnelEnabled TruthValue,
trpzApConfApConfigDataSecurityEnabled TruthValue,
trpzApConfApConfigWanOutageModeEnabled TruthValue,
trpzApConfApConfigWanOutageExtendedTimeout Unsigned32,
trpzApConfApConfigWanOutageEvaluationPeriod Unsigned32,
trpzApConfApConfigRemoteSiteName DisplayString,
trpzApConfApConfigPathMtu Unsigned32,
trpzApConfApConfigHighLatencyModeEnabled TruthValue,
trpzApConfApConfigApName2 DisplayString,
trpzApConfApConfigCacheConfigEnabled TruthValue
}
trpzApConfApConfigApNum OBJECT-TYPE
SYNTAX TrpzApNum
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Number of this AP (administratively assigned)."
::= { trpzApConfApConfigEntry 1 }
trpzApConfApConfigApAttachType OBJECT-TYPE
SYNTAX TrpzApAttachType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How this AP is attached to the AC
(directly or via L2/L3 network)."
::= { trpzApConfApConfigEntry 2 }
trpzApConfApConfigPhysPortNum OBJECT-TYPE
SYNTAX TrpzPhysPortNumberOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the physical port used to attach this AP.
Only valid for directly attached APs, otherwise will be zero."
::= { trpzApConfApConfigEntry 3 }
trpzApConfApConfigApSerialNum OBJECT-TYPE
SYNTAX TrpzApSerialNum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Serial Number used to identify this AP.
Only valid for network attached APs,
otherwise will be a zero length string."
::= { trpzApConfApConfigEntry 4 }
trpzApConfApConfigApModelName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Model name of this AP."
::= { trpzApConfApConfigEntry 5 }
trpzApConfApConfigFingerprint OBJECT-TYPE
SYNTAX TrpzApFingerprint
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RSA key fingerprint configured on this AP (binary value:
it is the MD5 hash of the public key of the RSA key pair).
For directly attached APs the fingerprint is a zero length string."
::= { trpzApConfApConfigEntry 6 }
trpzApConfApConfigBias OBJECT-TYPE
SYNTAX TrpzApBias
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias (high/low/sticky)."
::= { trpzApConfApConfigEntry 7 }
trpzApConfApConfigApTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The communication timeout for this AP, in seconds."
::= { trpzApConfApConfigEntry 8 }
trpzApConfApConfigApName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The configured Name for this AP.
Names longer than 16 characters will be truncated
(example: 'APNamelongerthan16chars' will be shown as
'APNamelongertha~').
Deprecated by trpzApConfApConfigApName2, which allows
AP Names longer than 16 characters."
::= { trpzApConfApConfigEntry 9 }
trpzApConfApConfigContact OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Contact information for this AP."
::= { trpzApConfApConfigEntry 10 }
trpzApConfApConfigLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Location information for this AP."
::= { trpzApConfApConfigEntry 11 }
trpzApConfApConfigBlinkEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LED blink mode is enabled on this AP."
::= { trpzApConfApConfigEntry 12 }
trpzApConfApConfigForceImageDownloadEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this AP is forced to always download
an image from the AC upon boot."
::= { trpzApConfApConfigEntry 13 }
trpzApConfApConfigFirmwareUpgradeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether automatic boot firmware upgrade
is enabled on this AP."
::= { trpzApConfApConfigEntry 14 }
trpzApConfApConfigLocalSwitchingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether local switching is enabled on this AP."
::= { trpzApConfApConfigEntry 15 }
trpzApConfApConfigPowerMode OBJECT-TYPE
SYNTAX TrpzApPowerMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode in which this AP is supplying power to its radios."
::= { trpzApConfApConfigEntry 16 }
trpzApConfApConfigLedMode OBJECT-TYPE
SYNTAX TrpzApLedMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LED Mode (auto/static/off)."
::= { trpzApConfApConfigEntry 17 }
trpzApConfApConfigDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Description for this AP."
::= { trpzApConfApConfigEntry 18 }
trpzApConfApConfigLldpMode OBJECT-TYPE
SYNTAX TrpzApLldpMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP Mode (tx/disabled)."
::= { trpzApConfApConfigEntry 19 }
trpzApConfApConfigLldpMedEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether LLDP-MED is enabled for this AP."
::= { trpzApConfApConfigEntry 20 }
trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether LLDP-MED Extended Power via MDI TLV
is selected for this AP."
::= { trpzApConfApConfigEntry 21 }
trpzApConfApConfigLldpMedInventoryTlvSelected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether LLDP-MED Inventory TLV is selected for this AP."
::= { trpzApConfApConfigEntry 22 }
trpzApConfApConfigApTunnelEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether AP to AP tunnels are enabled for this AP."
::= { trpzApConfApConfigEntry 23 }
trpzApConfApConfigDataSecurityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Data Security is enabled for this AP."
::= { trpzApConfApConfigEntry 24 }
trpzApConfApConfigWanOutageModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether WAN Outage (remote) Mode is enabled
for this AP."
::= { trpzApConfApConfigEntry 25 }
trpzApConfApConfigWanOutageExtendedTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration for which the AP can stay in WAN outage mode, in hours.
A value of zero means the AP can stay in outage mode indefinitely."
::= { trpzApConfApConfigEntry 26 }
trpzApConfApConfigWanOutageEvaluationPeriod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC connection Evaluation Period for APs in WAN Outage mode,
in seconds."
::= { trpzApConfApConfigEntry 27 }
trpzApConfApConfigRemoteSiteName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the remote site that the AP is part of.
An empty string means that the AP is not part of any
remote site."
::= { trpzApConfApConfigEntry 28 }
trpzApConfApConfigPathMtu OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Maximum Transmission Unit (in bytes) for
communication between AP and AC.
The value 0 means that the MTU was not administratively configured."
::= { trpzApConfApConfigEntry 29 }
trpzApConfApConfigHighLatencyModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the high-latency mode is enabled for the AP."
::= { trpzApConfApConfigEntry 30 }
trpzApConfApConfigApName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Name for this AP;
defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444');
could have been changed from CLI to a meaningful name,
for example the location of the AP (example: 'MeetingRoom73').
Deprecates trpzApConfApConfigApName."
::= { trpzApConfApConfigEntry 31 }
trpzApConfApConfigCacheConfigEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the configuration of the AP is
saved on the AP itself, so that it won't be lost after reboot.
To enable this setting, the AP must have outage mode enabled."
::= { trpzApConfApConfigEntry 32 }
-- ==================================
-- Radio Config table
trpzApConfRadioConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRadioConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the radios on all the APs
currently configured on this AC."
::= { trpzApConfigMibObjects 3 }
trpzApConfRadioConfigEntry OBJECT-TYPE
SYNTAX TrpzApConfRadioConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular Radio on a particular AP
that could be attached to the AC."
INDEX { trpzApConfRadioConfigApNum,
trpzApConfRadioConfigRadioIndex }
::= { trpzApConfRadioConfigTable 1 }
TrpzApConfRadioConfigEntry ::= SEQUENCE {
trpzApConfRadioConfigApNum TrpzApNum,
trpzApConfRadioConfigRadioIndex TrpzApRadioIndex,
trpzApConfRadioConfigRadioType TrpzRadioType,
trpzApConfRadioConfigRadioMode TrpzRadioMode,
trpzApConfRadioConfigRadioProfileName TrpzRadioProfileName,
trpzApConfRadioConfigChannel TrpzChannelNum,
trpzApConfRadioConfigTxPower TrpzPowerLevel,
trpzApConfRadioConfigAutoTuneMaxTxPower TrpzPowerLevel,
trpzApConfRadioConfigAntennaType DisplayString,
trpzApConfRadioConfigAntennaLocation TrpzRadioAntennaLocation,
trpzApConfRadioConfigLoadBalancingEnabled TruthValue,
trpzApConfRadioConfigLoadBalancingGroup DisplayString,
trpzApConfRadioConfigLoadRebalancingEnabled TruthValue,
trpzApConfRadioConfigRadioProfileName2 DisplayString
}
trpzApConfRadioConfigApNum OBJECT-TYPE
SYNTAX TrpzApNum
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Number of the AP (administratively assigned)."
::= { trpzApConfRadioConfigEntry 1 }
trpzApConfRadioConfigRadioIndex OBJECT-TYPE
SYNTAX TrpzApRadioIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this Radio on the AP."
::= { trpzApConfRadioConfigEntry 2 }
trpzApConfRadioConfigRadioType OBJECT-TYPE
SYNTAX TrpzRadioType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Type of this radio
(typeA, typeB, typeG, typeNA, typeNG)"
::= { trpzApConfRadioConfigEntry 3 }
trpzApConfRadioConfigRadioMode OBJECT-TYPE
SYNTAX TrpzRadioMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Mode of this radio (enabled/disabled/sentry)"
::= { trpzApConfRadioConfigEntry 4 }
trpzApConfRadioConfigRadioProfileName OBJECT-TYPE
SYNTAX TrpzRadioProfileName
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Identifies the Radio Profile to be applied this radio,
by short name, as it appears in the legacy Radio Profile table
(trpzApConfRadioProfileTable).
Deprecated by trpzApConfRadioConfigRadioProfileName2,
which allows Radio Profile Names longer than 16 characters."
::= { trpzApConfRadioConfigEntry 5 }
trpzApConfRadioConfigChannel OBJECT-TYPE
SYNTAX TrpzChannelNum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Channel Number of this radio."
::= { trpzApConfRadioConfigEntry 6 }
trpzApConfRadioConfigTxPower OBJECT-TYPE
SYNTAX TrpzPowerLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Tx Power level of this radio."
::= { trpzApConfRadioConfigEntry 7 }
trpzApConfRadioConfigAutoTuneMaxTxPower OBJECT-TYPE
SYNTAX TrpzPowerLevel
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The Maximum Tx Power that Auto Tune is allowed
to set for this radio.
Obsoleted: not supported anymore."
::= { trpzApConfRadioConfigEntry 8 }
trpzApConfRadioConfigAntennaType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Antenna Type for this radio."
::= { trpzApConfRadioConfigEntry 9 }
trpzApConfRadioConfigAntennaLocation OBJECT-TYPE
SYNTAX TrpzRadioAntennaLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Antenna Location for this radio."
::= { trpzApConfRadioConfigEntry 10 }
trpzApConfRadioConfigLoadBalancingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RF Load Balancing is enabled on this radio."
::= { trpzApConfRadioConfigEntry 11 }
trpzApConfRadioConfigLoadBalancingGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the RF Load Balancing group that
this radio is assigned to."
::= { trpzApConfRadioConfigEntry 12 }
trpzApConfRadioConfigLoadRebalancingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RF Load Rebalancing is enabled for this radio."
::= { trpzApConfRadioConfigEntry 13 }
trpzApConfRadioConfigRadioProfileName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the Radio Profile to be applied to this radio.
Deprecates trpzApConfRadioConfigRadioProfileName."
::= { trpzApConfRadioConfigEntry 14 }
-- ==========================================================
-- AP Template main Config table (similar to AP Config table)
trpzApConfApTemplateConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfApTemplateConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing all the AP Templates currently configured
on this AC."
::= { trpzApConfigMibObjects 4 }
trpzApConfApTemplateConfigEntry OBJECT-TYPE
SYNTAX TrpzApConfApTemplateConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Template configuration for APs that could be attached to the AC."
INDEX { trpzApConfApTemplConfApTemplateName }
::= { trpzApConfApTemplateConfigTable 1 }
TrpzApConfApTemplateConfigEntry ::= SEQUENCE {
trpzApConfApTemplConfApTemplateName TrpzApTemplateName,
trpzApConfApTemplConfApTemplateEnabled TruthValue,
trpzApConfApTemplConfBias TrpzApBias,
trpzApConfApTemplConfApTimeout Unsigned32,
trpzApConfApTemplConfBlinkEnabled TruthValue,
trpzApConfApTemplConfForceImageDownloadEnabled TruthValue,
trpzApConfApTemplConfFirmwareUpgradeEnabled TruthValue,
trpzApConfApTemplConfLocalSwitchingEnabled TruthValue,
trpzApConfApTemplConfPowerMode TrpzApPowerMode,
trpzApConfApTemplConfLedMode TrpzApLedMode
}
trpzApConfApTemplConfApTemplateName OBJECT-TYPE
SYNTAX TrpzApTemplateName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AP Template Name."
::= { trpzApConfApTemplateConfigEntry 1 }
trpzApConfApTemplConfApTemplateEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this AP Template is Enabled
(can be used for bringing up APs)."
::= { trpzApConfApTemplateConfigEntry 2 }
trpzApConfApTemplConfBias OBJECT-TYPE
SYNTAX TrpzApBias
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bias (high/low/sticky)."
::= { trpzApConfApTemplateConfigEntry 3 }
trpzApConfApTemplConfApTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The communication timeout for this AP Template, in seconds."
::= { trpzApConfApTemplateConfigEntry 4 }
trpzApConfApTemplConfBlinkEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LED blink mode is enabled
on this AP Template."
::= { trpzApConfApTemplateConfigEntry 5 }
trpzApConfApTemplConfForceImageDownloadEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this AP is forced to always download
an image from the AC upon boot."
::= { trpzApConfApTemplateConfigEntry 6 }
trpzApConfApTemplConfFirmwareUpgradeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether automatic boot firmware upgrade
is enabled on this AP Template."
::= { trpzApConfApTemplateConfigEntry 7 }
trpzApConfApTemplConfLocalSwitchingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether local switching is enabled
on this AP Template."
::= { trpzApConfApTemplateConfigEntry 8 }
trpzApConfApTemplConfPowerMode OBJECT-TYPE
SYNTAX TrpzApPowerMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode in which an AP using this Template
will be supplying power to its radios."
::= { trpzApConfApTemplateConfigEntry 9 }
trpzApConfApTemplConfLedMode OBJECT-TYPE
SYNTAX TrpzApLedMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LED Mode (auto/static/off)
for an AP using this Template."
::= { trpzApConfApTemplateConfigEntry 10 }
-- ==============================================================
-- AP Template Radio Config table (similar to Radio Config table)
trpzApConfApTemplateRadioConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfApTemplateRadioConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the radios for all the AP Templates
currently configured on this AC."
::= { trpzApConfigMibObjects 5 }
trpzApConfApTemplateRadioConfigEntry OBJECT-TYPE
SYNTAX TrpzApConfApTemplateRadioConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Template configuration for a particular Radio index
on an AP Template configured on this AC."
INDEX { trpzApConfApTemRadioConfApTemplateName,
trpzApConfApTemRadioConfRadioIndex }
::= { trpzApConfApTemplateRadioConfigTable 1 }
TrpzApConfApTemplateRadioConfigEntry ::= SEQUENCE {
trpzApConfApTemRadioConfApTemplateName TrpzApTemplateName,
trpzApConfApTemRadioConfRadioIndex TrpzApRadioIndex,
trpzApConfApTemRadioConfRadioMode TrpzRadioMode,
trpzApConfApTemRadioConfRadioProfileName TrpzRadioProfileName,
trpzApConfApTemRadioConfAutoTuneMaxTxPower TrpzPowerLevel,
trpzApConfApTemRadioConfLoadBalancingEnabled TruthValue,
trpzApConfApTemRadioConfLoadBalancingGroup DisplayString,
trpzApConfApTemRadioConfLoadRebalancingEnabled TruthValue,
trpzApConfApTemRadioConfRadioProfileName2 DisplayString
}
trpzApConfApTemRadioConfApTemplateName OBJECT-TYPE
SYNTAX TrpzApTemplateName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AP Template Name."
::= { trpzApConfApTemplateRadioConfigEntry 1 }
trpzApConfApTemRadioConfRadioIndex OBJECT-TYPE
SYNTAX TrpzApRadioIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of this Radio on the AP Template."
::= { trpzApConfApTemplateRadioConfigEntry 2 }
trpzApConfApTemRadioConfRadioMode OBJECT-TYPE
SYNTAX TrpzRadioMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured mode of a radio using this Template
(enabled/disabled/sentry)"
::= { trpzApConfApTemplateRadioConfigEntry 3 }
trpzApConfApTemRadioConfRadioProfileName OBJECT-TYPE
SYNTAX TrpzRadioProfileName
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Identifies the Radio Profile to be applied to a radio
using this Template, by short name, as it appears in the legacy
Radio Profile table (trpzApConfRadioProfileTable).
Deprecated by trpzApConfApTemRadioConfRadioProfileName2,
which allows Radio Profile Names longer than 16 characters."
::= { trpzApConfApTemplateRadioConfigEntry 4 }
trpzApConfApTemRadioConfAutoTuneMaxTxPower OBJECT-TYPE
SYNTAX TrpzPowerLevel
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The Maximum Tx Power that Auto Tune will be allowed
to set for a radio using this Template.
Obsoleted: not supported anymore."
::= { trpzApConfApTemplateRadioConfigEntry 5 }
trpzApConfApTemRadioConfLoadBalancingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RF Load Balancing will be enabled
on a radio using this Template."
::= { trpzApConfApTemplateRadioConfigEntry 6 }
trpzApConfApTemRadioConfLoadBalancingGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the RF Load Balancing group that
a radio using this Template will be assigned to."
::= { trpzApConfApTemplateRadioConfigEntry 7 }
trpzApConfApTemRadioConfLoadRebalancingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RF Load Rebalancing will be enabled
for a radio using this Template."
::= { trpzApConfApTemplateRadioConfigEntry 8 }
trpzApConfApTemRadioConfRadioProfileName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the Radio Profile to be applied
to a radio using this Template.
Deprecates trpzApConfApTemRadioConfRadioProfileName."
::= { trpzApConfApTemplateRadioConfigEntry 9 }
-- ==========================
-- Radio Profile table
trpzApConfRadioProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRadioProfileEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table describing the Radio Profiles
currently configured on this AC.
Deprecated by trpzApConfRadioProfile32Table, whose
index may be up to 32 characters long."
::= { trpzApConfigMibObjects 6 }
trpzApConfRadioProfileEntry OBJECT-TYPE
SYNTAX TrpzApConfRadioProfileEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Configuration for a particular Radio Profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
INDEX { trpzApConfRadioProfRadioProfileName }
::= { trpzApConfRadioProfileTable 1 }
TrpzApConfRadioProfileEntry ::= SEQUENCE {
trpzApConfRadioProfRadioProfileName TrpzRadioProfileName,
trpzApConfRadioProfBeaconInterval Unsigned32,
trpzApConfRadioProfDtimInterval Unsigned32,
trpzApConfRadioProfChannelWidth11na TrpzRadioChannelWidth,
trpzApConfRadioProfMaxTxLifetime Unsigned32,
trpzApConfRadioProfMaxRxLifetime Unsigned32,
trpzApConfRadioProfRtsThreshold Unsigned32,
trpzApConfRadioProfFragThreshold Unsigned32,
trpzApConfRadioProfLongXmitPreambleEnabled TruthValue,
trpzApConfRadioProfCountermeasuresMode TrpzRadioProfileCountermeasuresMode,
trpzApConfRadioProfRFScanMode TrpzRadioProfileRFScanMode,
trpzApConfRadioProfRFScanChannelScope TrpzRadioProfileRFScanChannelScope,
trpzApConfRadioProfRFScanCTSEnabled TruthValue,
trpzApConfRadioProfAutoTune11aChannelRange TrpzRadioProfileAutoTuneChannelRange,
trpzApConfRadioProfAutoTuneIgnoreClientsEnabled TruthValue,
trpzApConfRadioProfAutoTuneChannelEnabled TruthValue,
trpzApConfRadioProfAutoTuneChannelHolddownInterval Unsigned32,
trpzApConfRadioProfAutoTuneChannelChangeInterval Unsigned32,
trpzApConfRadioProfAutoTunePowerEnabled TruthValue,
trpzApConfRadioProfAutoTunePowerRampInterval Unsigned32,
trpzApConfRadioProfAutoTunePowerChangeInterval Unsigned32,
trpzApConfRadioProfFairQueuingEnabled TruthValue,
trpzApConfRadioProfCacBackgroundACMandatory TruthValue,
trpzApConfRadioProfCacBackgroundMaxUtilization Unsigned32,
trpzApConfRadioProfCacBackgroundPolicingEnabled TruthValue,
trpzApConfRadioProfCacBestEffortACMandatory TruthValue,
trpzApConfRadioProfCacBestEffortMaxUtilization Unsigned32,
trpzApConfRadioProfCacBestEffortPolicingEnabled TruthValue,
trpzApConfRadioProfCacVideoACMandatory TruthValue,
trpzApConfRadioProfCacVideoMaxUtilization Unsigned32,
trpzApConfRadioProfCacVideoPolicingEnabled TruthValue,
trpzApConfRadioProfCacVoiceACMandatory TruthValue,
trpzApConfRadioProfCacVoiceMaxUtilization Unsigned32,
trpzApConfRadioProfCacVoicePolicingEnabled TruthValue,
trpzApConfRadioProfRfidTagEnabled TruthValue,
trpzApConfRadioProfWmmPowerSaveEnabled TruthValue,
trpzApConfRadioProfRateEnforcementEnabled TruthValue,
trpzApConfRadioProfDfsChannelsEnabled TruthValue,
trpzApConfRadioProfRFSpectralScanModeEnabled TruthValue,
trpzApConfRadioProfRFSpectralScanPriority TrpzRadioProfileRFSpectralScanPriority,
trpzApConfRadioProfRadioProfileFullName DisplayString
}
trpzApConfRadioProfRadioProfileName OBJECT-TYPE
SYNTAX TrpzRadioProfileName
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Name of this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 1 }
trpzApConfRadioProfBeaconInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Beacon Interval, time in thousandths of a second,
for this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 2 }
trpzApConfRadioProfDtimInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times after every beacon
that each AP radio in a radio profile sends a
delivery traffic indication map (DTIM),
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 3 }
trpzApConfRadioProfChannelWidth11na OBJECT-TYPE
SYNTAX TrpzRadioChannelWidth
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"802.11n Channel Width for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 4 }
trpzApConfRadioProfMaxTxLifetime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum transmit threshold for the
AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 5 }
trpzApConfRadioProfMaxRxLifetime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum receive threshold for the
AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 6 }
trpzApConfRadioProfRtsThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The RTS threshold for the AP radios using
this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 7 }
trpzApConfRadioProfFragThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The fragmentation threshold for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 8 }
trpzApConfRadioProfLongXmitPreambleEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether an 802.11b/g AP radio using
this radio profile transmits Long Preamble.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 9 }
trpzApConfRadioProfCountermeasuresMode OBJECT-TYPE
SYNTAX TrpzRadioProfileCountermeasuresMode
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Countermeasures Mode for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 10 }
trpzApConfRadioProfRFScanMode OBJECT-TYPE
SYNTAX TrpzRadioProfileRFScanMode
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"RF Scanning Mode for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 11 }
trpzApConfRadioProfRFScanChannelScope OBJECT-TYPE
SYNTAX TrpzRadioProfileRFScanChannelScope
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"RF scanning Channel Scope for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 12 }
trpzApConfRadioProfRFScanCTSEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the AP radios using this radio profile
send CTS To Self packet before going off channel.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 13 }
trpzApConfRadioProfAutoTune11aChannelRange OBJECT-TYPE
SYNTAX TrpzRadioProfileAutoTuneChannelRange
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The allowable 802.11a Channel Range used by Auto-Tune
for the AP radios using this radio profile.
Obsoleted: not supported anymore."
::= { trpzApConfRadioProfileEntry 14 }
trpzApConfRadioProfAutoTuneIgnoreClientsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates whether the AP radios using this radio profile
Ignore Client connections in Auto-Tune channel selections.
Obsoleted: not supported anymore."
::= { trpzApConfRadioProfileEntry 15 }
trpzApConfRadioProfAutoTuneChannelEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates whether Channel Auto-Tuning
is enabled for the AP radios using this radio profile.
Obsoleted: not supported anymore."
::= { trpzApConfRadioProfileEntry 16 }
trpzApConfRadioProfAutoTuneChannelHolddownInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Minimum Interval (in seconds) between Channel changes
due to Auto-Tuning, for the AP radios using this radio profile.
Obsoleted: not supported anymore."
::= { trpzApConfRadioProfileEntry 17 }
trpzApConfRadioProfAutoTuneChannelChangeInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The interval (in seconds) at which RF Auto-Tuning
decides whether to Change the Channel for the AP radios
using this radio profile.
Obsoleted: not supported anymore."
::= { trpzApConfRadioProfileEntry 18 }
trpzApConfRadioProfAutoTunePowerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether Power Auto-Tuning is enabled
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 19 }
trpzApConfRadioProfAutoTunePowerRampInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Minimum Interval (in seconds) between Power changes
due to Auto-Tuning, for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 20 }
trpzApConfRadioProfAutoTunePowerChangeInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The interval (in seconds) at which RF Auto-Tuning
decides whether to Change the Power for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 21 }
trpzApConfRadioProfFairQueuingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether weighted Fair Queuing is enabled
for this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 22 }
trpzApConfRadioProfCacBackgroundACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether Admission Control for Background traffic
is Mandatory for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 23 }
trpzApConfRadioProfCacBackgroundMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum admission control limit for Background traffic,
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 24 }
trpzApConfRadioProfCacBackgroundPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates that admission control Policing for
Background traffic is enabled, for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 25 }
trpzApConfRadioProfCacBestEffortACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates that Admission Control for Best Effort traffic
is Mandatory for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 26 }
trpzApConfRadioProfCacBestEffortMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum admission control limit for Best Effort traffic,
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 27 }
trpzApConfRadioProfCacBestEffortPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates that admission control Policing for
Best Effort traffic is enabled, for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 28 }
trpzApConfRadioProfCacVideoACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates that Admission Control for Video traffic
is Mandatory for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 29 }
trpzApConfRadioProfCacVideoMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum admission control limit for Video traffic,
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 30 }
trpzApConfRadioProfCacVideoPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates that admission control Policing for
Video traffic is enabled, for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 31 }
trpzApConfRadioProfCacVoiceACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates that Admission Control for Voice traffic
is Mandatory for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 32 }
trpzApConfRadioProfCacVoiceMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum admission control limit for Voice traffic,
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 33 }
trpzApConfRadioProfCacVoicePolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates that admission control Policing for
Voice traffic is enabled, for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 34 }
trpzApConfRadioProfRfidTagEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether an AP radio using this radio profile
is enabled to function as location receivers in an AeroScout
Visibility System.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 35 }
trpzApConfRadioProfWmmPowerSaveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the AP radios using this radio profile
enable power save mode on WMM clients.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 36 }
trpzApConfRadioProfRateEnforcementEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether data rates are enforced for the AP radios
using this radio profile, which means
that a connecting client must transmit at one of the
mandatory or standard rates in order to associate
with the AP.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 37 }
trpzApConfRadioProfDfsChannelsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates that the AP radios using this radio profile
use DFS channels to meet regulatory requirements.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 38 }
trpzApConfRadioProfRFSpectralScanModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether Spectral Scanning Mode is enabled
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 39 }
trpzApConfRadioProfRFSpectralScanPriority OBJECT-TYPE
SYNTAX TrpzRadioProfileRFSpectralScanPriority
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Priority when a Spectral Scan sample time arrives
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long."
::= { trpzApConfRadioProfileEntry 40 }
trpzApConfRadioProfRadioProfileFullName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The full name of the Radio Profile.
Indicates the entry in the new Radio Profile table
(trpzApConfRadioProfile32Table)."
::= { trpzApConfRadioProfileEntry 41 }
-- =====================================================
-- Table for Service Profiles connected to Radio Profile
trpzApConfRadioProfServiceProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRadioProfServiceProfileEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table describing the currently configured connections
between Radio Profiles and Service Profiles.
Deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows 32 characters long Radio Profile Names in the index."
::= { trpzApConfigMibObjects 7 }
trpzApConfRadioProfServiceProfileEntry OBJECT-TYPE
SYNTAX TrpzApConfRadioProfServiceProfileEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Connection between a Radio Profile and a Service Profile,
currently configured on the AC.
This table (trpzApConfRadioProfServiceProfileTable) has been
deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows 32 characters long Radio Profile Names in the index."
INDEX { trpzApConfRpServpRadioProfileName,
trpzApConfRpServpServiceProfileName }
::= { trpzApConfRadioProfServiceProfileTable 1 }
TrpzApConfRadioProfServiceProfileEntry ::= SEQUENCE {
trpzApConfRpServpRadioProfileName TrpzRadioProfileName,
trpzApConfRpServpServiceProfileName TrpzServiceProfileName,
trpzApConfRpServpRowStatus RowStatus
}
trpzApConfRpServpRadioProfileName OBJECT-TYPE
SYNTAX TrpzRadioProfileName
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Name of this Radio Profile.
This table (trpzApConfRadioProfServiceProfileTable) has been
deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows 32 characters long Radio Profile Names in the index."
::= { trpzApConfRadioProfServiceProfileEntry 1 }
trpzApConfRpServpServiceProfileName OBJECT-TYPE
SYNTAX TrpzServiceProfileName
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Name of a Service Profile connected to
this Radio Profile.
This table (trpzApConfRadioProfServiceProfileTable) has been
deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows 32 characters long Radio Profile Names in the index."
::= { trpzApConfRadioProfServiceProfileEntry 2 }
trpzApConfRpServpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object is used to create a new row or
delete an existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
Only these two values 'createAndGo' and 'destroy'
will be accepted.
This table (trpzApConfRadioProfServiceProfileTable) has been
deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows 32 characters long Radio Profile Names in the index."
::= { trpzApConfRadioProfServiceProfileEntry 3 }
-- ==================================================
-- Table for Snoop Filters connected to Radio Profile
trpzApConfRadioProfSnoopFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRadioProfSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table describing the currently configured connections
between Radio Profiles and Snoop Filters.
Deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 characters long Radio Profile Names in the index."
::= { trpzApConfigMibObjects 8 }
trpzApConfRadioProfSnoopFilterEntry OBJECT-TYPE
SYNTAX TrpzApConfRadioProfSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Connection between a Radio Profile and a Snoop Filter,
currently configured on the AC.
This table (trpzApConfRadioProfSnoopFilterTable) has been
deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 characters long Radio Profile Names in the index."
INDEX { trpzApConfRpSnoopfRadioProfileName,
trpzApConfRpSnoopfSnoopFilterName }
::= { trpzApConfRadioProfSnoopFilterTable 1 }
TrpzApConfRadioProfSnoopFilterEntry ::= SEQUENCE {
trpzApConfRpSnoopfRadioProfileName TrpzRadioProfileName,
trpzApConfRpSnoopfSnoopFilterName TrpzSnoopFilterName,
trpzApConfRpSnoopfRowStatus RowStatus
}
trpzApConfRpSnoopfRadioProfileName OBJECT-TYPE
SYNTAX TrpzRadioProfileName
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Name of this Radio Profile.
This table (trpzApConfRadioProfSnoopFilterTable) has been
deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 characters long Radio Profile Names in the index."
::= { trpzApConfRadioProfSnoopFilterEntry 1 }
trpzApConfRpSnoopfSnoopFilterName OBJECT-TYPE
SYNTAX TrpzSnoopFilterName
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Name of a Snoop Filter connected to
this Radio Profile.
This table (trpzApConfRadioProfSnoopFilterTable) has been
deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 characters long Radio Profile Names in the index."
::= { trpzApConfRadioProfSnoopFilterEntry 2 }
trpzApConfRpSnoopfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object is used to create a new row or
delete an existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
Only these two values 'createAndGo' and 'destroy'
will be accepted.
This table (trpzApConfRadioProfSnoopFilterTable) has been
deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 characters long Radio Profile Names in the index."
::= { trpzApConfRadioProfSnoopFilterEntry 3 }
-- ==========================
-- Service Profile table
trpzApConfServiceProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfServiceProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the Service Profiles
currently configured on this AC."
::= { trpzApConfigMibObjects 9 }
trpzApConfServiceProfileEntry OBJECT-TYPE
SYNTAX TrpzApConfServiceProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular Service Profile."
INDEX { trpzApConfServProfServiceProfileName }
::= { trpzApConfServiceProfileTable 1 }
TrpzApConfServiceProfileEntry ::= SEQUENCE {
trpzApConfServProfServiceProfileName TrpzServiceProfileName,
trpzApConfServProfSsidType TrpzServiceProfileSsidType,
trpzApConfServProfBeaconEnabled TruthValue,
trpzApConfServProf11naMode TrpzServiceProfile11nMode,
trpzApConfServProf11ngMode TrpzServiceProfile11nMode,
trpzApConfServProf11nShortGuardIntervalEnabled TruthValue,
trpzApConfServProf11nFrameAggregation TrpzServiceProfile11nFrameAggregationType,
trpzApConfServProf11nMsduMaxLength TrpzServiceProfile11nMsduMaxLength,
trpzApConfServProf11nMpduMaxLength TrpzServiceProfile11nMpduMaxLength,
trpzApConfServProfAuthFallthru TrpzServiceProfileAuthFallthruType,
trpzApConfServProfWebAAAForm DisplayString,
trpzApConfServProfSharedKeyAuthEnabled TruthValue,
trpzApConfServProfWpaIeEnabled TruthValue,
trpzApConfServProfWpaIeCipherTkipEnabled TruthValue,
trpzApConfServProfWpaIeCipherCcmpEnabled TruthValue,
trpzApConfServProfWpaIeCipherWep40Enabled TruthValue,
trpzApConfServProfWpaIeCipherWep104Enabled TruthValue,
trpzApConfServProfWpaIeAuthDot1xEnabled TruthValue,
trpzApConfServProfWpaIeAuthPskEnabled TruthValue,
trpzApConfServProfRsnIeEnabled TruthValue,
trpzApConfServProfRsnIeCipherTkipEnabled TruthValue,
trpzApConfServProfRsnIeCipherCcmpEnabled TruthValue,
trpzApConfServProfRsnIeCipherWep40Enabled TruthValue,
trpzApConfServProfRsnIeCipherWep104Enabled TruthValue,
trpzApConfServProfRsnIeAuthDot1xEnabled TruthValue,
trpzApConfServProfRsnIeAuthPskEnabled TruthValue,
trpzApConfServProfTkipMicCountermeasuresTime Unsigned32,
trpzApConfServProfMaxBandwidthKbps Unsigned32,
trpzApConfServProfCacMode TrpzServiceProfileCacMode,
trpzApConfServProfCacSessCount Unsigned32,
trpzApConfServProfUserIdleTimeout Unsigned32,
trpzApConfServProfIdleClientProbingEnabled TruthValue,
trpzApConfServProfShortRetryCount Unsigned32,
trpzApConfServProfLongRetryCount Unsigned32,
trpzApConfServProfProxyArpEnabled TruthValue,
trpzApConfServProfDhcpRestrictEnabled TruthValue,
trpzApConfServProfNoBroadcastEnabled TruthValue,
trpzApConfServProfSygateOnDemandEnabled TruthValue,
trpzApConfServProfEnforceChecksEnabled TruthValue,
trpzApConfServProfSodaRemediationAcl DisplayString,
trpzApConfServProfSodaSuccessPage DisplayString,
trpzApConfServProfSodaFailurePage DisplayString,
trpzApConfServProfSodaLogoutPage DisplayString,
trpzApConfServProfSodaAgentDirectory DisplayString,
trpzApConfServProfWebPortalSessionTimeout Unsigned32,
trpzApConfServProfWebPortalAcl DisplayString,
trpzApConfServProfWebPortalLogoutEnabled TruthValue,
trpzApConfServProfWebPortalLogoutUrl DisplayString,
trpzApConfServProfKeepInitialVlanEnabled TruthValue,
trpzApConfServProfMeshModeEnabled TruthValue,
trpzApConfServProfBridgingEnabled TruthValue,
trpzApConfServProfLoadBalanceExemptEnabled TruthValue,
trpzApConfServProfM2UConversionEnabled TruthValue,
trpzApConfServProfBackupSsidMode TrpzBackupSsidMode,
trpzApConfServProfBackupSsidTimeout Unsigned32,
trpzApConfServProfBackupSsidKeepClients TruthValue,
trpzApConfServProfWebPortalLogoutForm DisplayString
}
trpzApConfServProfServiceProfileName OBJECT-TYPE
SYNTAX TrpzServiceProfileName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this service profile"
::= { trpzApConfServiceProfileEntry 1 }
trpzApConfServProfSsidType OBJECT-TYPE
SYNTAX TrpzServiceProfileSsidType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this service profile (clear/crypto)."
::= { trpzApConfServiceProfileEntry 2 }
trpzApConfServProfBeaconEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether beacons are enabled
for this service profile."
::= { trpzApConfServiceProfileEntry 3 }
trpzApConfServProf11naMode OBJECT-TYPE
SYNTAX TrpzServiceProfile11nMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the 802.11n (na) mode for this service profile."
::= { trpzApConfServiceProfileEntry 4 }
trpzApConfServProf11ngMode OBJECT-TYPE
SYNTAX TrpzServiceProfile11nMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the 802.11n (ng) mode for this service profile."
::= { trpzApConfServiceProfileEntry 5 }
trpzApConfServProf11nShortGuardIntervalEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether short guard interval is enabled
for this service profile."
::= { trpzApConfServiceProfileEntry 6 }
trpzApConfServProf11nFrameAggregation OBJECT-TYPE
SYNTAX TrpzServiceProfile11nFrameAggregationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Frame Aggregation mode
for this service profile."
::= { trpzApConfServiceProfileEntry 7 }
trpzApConfServProf11nMsduMaxLength OBJECT-TYPE
SYNTAX TrpzServiceProfile11nMsduMaxLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum MSDU length for this service profile."
::= { trpzApConfServiceProfileEntry 8 }
trpzApConfServProf11nMpduMaxLength OBJECT-TYPE
SYNTAX TrpzServiceProfile11nMpduMaxLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum MPDU length for this service profile."
::= { trpzApConfServiceProfileEntry 9 }
trpzApConfServProfAuthFallthru OBJECT-TYPE
SYNTAX TrpzServiceProfileAuthFallthruType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication type to be attempted for users who
do not match a 802.1X or MAC authentication rule,
for this service profile."
::= { trpzApConfServiceProfileEntry 10 }
trpzApConfServProfWebAAAForm OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The custom login page that loads for WebAAA users,
for this service profile."
::= { trpzApConfServiceProfileEntry 11 }
trpzApConfServProfSharedKeyAuthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether shared-key authentication is enabled
for this service profile."
::= { trpzApConfServiceProfileEntry 12 }
trpzApConfServProfWpaIeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether WPA IE beaconing is enabled
for this service profile."
::= { trpzApConfServiceProfileEntry 13 }
trpzApConfServProfWpaIeCipherTkipEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether TKIP cipher is advertised in WPA IE,
for this service profile."
::= { trpzApConfServiceProfileEntry 14 }
trpzApConfServProfWpaIeCipherCcmpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether CCMP cipher is advertised in WPA IE,
for this service profile."
::= { trpzApConfServiceProfileEntry 15 }
trpzApConfServProfWpaIeCipherWep40Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates whether WEP-40 cipher is advertised in WPA IE,
for this service profile.
Obsoleted: not supported anymore."
::= { trpzApConfServiceProfileEntry 16 }
trpzApConfServProfWpaIeCipherWep104Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates whether WEP-104 cipher is advertised in WPA IE,
for this service profile.
Obsoleted: not supported anymore."
::= { trpzApConfServiceProfileEntry 17 }
trpzApConfServProfWpaIeAuthDot1xEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether 802.1X authentication is advertised
in WPA IE, for this service profile."
::= { trpzApConfServiceProfileEntry 18 }
trpzApConfServProfWpaIeAuthPskEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Pre-Shared Key authentication
is advertised in WPA IE, for this service profile."
::= { trpzApConfServiceProfileEntry 19 }
trpzApConfServProfRsnIeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether RSN IE beaconing is enabled
for this service profile."
::= { trpzApConfServiceProfileEntry 20 }
trpzApConfServProfRsnIeCipherTkipEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether TKIP cipher is advertised in RSN IE,
for this service profile."
::= { trpzApConfServiceProfileEntry 21 }
trpzApConfServProfRsnIeCipherCcmpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether CCMP cipher is advertised in RSN IE,
for this service profile."
::= { trpzApConfServiceProfileEntry 22 }
trpzApConfServProfRsnIeCipherWep40Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates whether WEP-40 cipher is advertised in RSN IE,
for this service profile.
Obsoleted: not supported anymore."
::= { trpzApConfServiceProfileEntry 23 }
trpzApConfServProfRsnIeCipherWep104Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates whether WEP-104 cipher is advertised in RSN IE,
for this service profile.
Obsoleted: not supported anymore."
::= { trpzApConfServiceProfileEntry 24 }
trpzApConfServProfRsnIeAuthDot1xEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether 802.1X authentication is advertised
in RSN IE, for this service profile."
::= { trpzApConfServiceProfileEntry 25 }
trpzApConfServProfRsnIeAuthPskEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Pre-Shared Key authentication
is advertised in RSN IE, for this service profile."
::= { trpzApConfServiceProfileEntry 26 }
trpzApConfServProfTkipMicCountermeasuresTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the TKIP MIC countermeasures time in milliseconds
for this service profile.
This is the length of time that AP radios use
countermeasures if two Message Integrity Code (MIC)
failures occur within 60 seconds."
::= { trpzApConfServiceProfileEntry 27 }
trpzApConfServProfMaxBandwidthKbps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bandwidth limit for this service profile,
in Kbits/second. A value of zero means unlimited."
::= { trpzApConfServiceProfileEntry 28 }
trpzApConfServProfCacMode OBJECT-TYPE
SYNTAX TrpzServiceProfileCacMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Call Admission Control (CAC) mode,
for this service profile."
::= { trpzApConfServiceProfileEntry 29 }
trpzApConfServProfCacSessCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active sessions a radio can have
when session-based CAC is enabled, for this service profile."
::= { trpzApConfServiceProfileEntry 30 }
trpzApConfServProfUserIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds MSS has a session
available for a client not sending data and is not
responding to keepalives (idle-client probes). If
the timer expires, the client session is changed
to the Dissociated state, for this service profile."
::= { trpzApConfServiceProfileEntry 31 }
trpzApConfServProfIdleClientProbingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the AC radio sends
a unicast null-data frame to each client every 10 seconds,
for this service profile."
::= { trpzApConfServiceProfileEntry 32 }
trpzApConfServProfShortRetryCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a radio can send a short unicast frame
without receiving an acknowledgment,
for this service profile."
::= { trpzApConfServiceProfileEntry 33 }
trpzApConfServProfLongRetryCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a radio can send a long unicast frame
without receiving an acknowledgment,
for this service profile."
::= { trpzApConfServiceProfileEntry 34 }
trpzApConfServProfProxyArpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether proxy ARP is enabled
for this service profile."
::= { trpzApConfServiceProfileEntry 35 }
trpzApConfServProfDhcpRestrictEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether only DHCP traffic is allowed until
a newly associated client has been authenticated
and authorized, for this service profile."
::= { trpzApConfServiceProfileEntry 36 }
trpzApConfServProfNoBroadcastEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether broadcast ARP and DHCP packets
are converted to unicast for this service profile."
::= { trpzApConfServiceProfileEntry 37 }
trpzApConfServProfSygateOnDemandEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Sygate On-Demand Manager
(SODA Manager) is enabled for this service profile."
::= { trpzApConfServiceProfileEntry 38 }
trpzApConfServProfEnforceChecksEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Enforcement of the SODA security checks
is enabled for this service profile."
::= { trpzApConfServiceProfileEntry 39 }
trpzApConfServProfSodaRemediationAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remediation page ACL to apply to the client when the
failure page is loaded, for this service profile."
::= { trpzApConfServiceProfileEntry 40 }
trpzApConfServProfSodaSuccessPage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Success page that is displayed on the client when
a client successfully runs the checks
performed by the SODA agent, for this service profile."
::= { trpzApConfServiceProfileEntry 41 }
trpzApConfServProfSodaFailurePage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Failure page that is displayed on the client when
the SODA agent checks fail, for this service profile."
::= { trpzApConfServiceProfileEntry 42 }
trpzApConfServProfSodaLogoutPage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The page to load when a client closes the
SODA virtual desktop and logs out of the network,
for this service profile."
::= { trpzApConfServiceProfileEntry 43 }
trpzApConfServProfSodaAgentDirectory OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies a different directory for the
SODA agent files used for this service profile."
::= { trpzApConfServiceProfileEntry 44 }
trpzApConfServProfWebPortalSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval, in seconds, for which a Web Portal
WebAAA session remains in the Deassociated state
before being terminated automatically,
for this service profile."
::= { trpzApConfServiceProfileEntry 45 }
trpzApConfServProfWebPortalAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of ACL used for filtering traffic for Web Portal
users during authentication, for this service profile."
::= { trpzApConfServiceProfileEntry 46 }
trpzApConfServProfWebPortalLogoutEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the Web Portal logout functionality
is enabled for this service profile."
::= { trpzApConfServiceProfileEntry 47 }
trpzApConfServProfWebPortalLogoutUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Web Portal Logout URL for this service profile."
::= { trpzApConfServiceProfileEntry 48 }
trpzApConfServProfKeepInitialVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether, after roaming, the user keeps
the VLAN assigned from the first connection,
for this service profile."
::= { trpzApConfServiceProfileEntry 49 }
trpzApConfServProfMeshModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether wireless mesh between APs
is enabled for this service profile."
::= { trpzApConfServiceProfileEntry 50 }
trpzApConfServProfBridgingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether wireless bridging of traffic
between APs is enabled for this service profile."
::= { trpzApConfServiceProfileEntry 51 }
trpzApConfServProfLoadBalanceExemptEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this service profile is
exempted from load balancing."
::= { trpzApConfServiceProfileEntry 52 }
trpzApConfServProfM2UConversionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether multicast IPv4 traffic on the wire
is converted to unicast traffic for the wireless clients,
for this service profile."
::= { trpzApConfServiceProfileEntry 53 }
trpzApConfServProfBackupSsidMode OBJECT-TYPE
SYNTAX TrpzBackupSsidMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the availability of backup SSIDs
at a remote site.
Backup SSIDs allow access to new clients
when central site outage occurs."
::= { trpzApConfServiceProfileEntry 54 }
trpzApConfServProfBackupSsidTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates how many seconds the backup SSIDs at
a remote site will stay up after the outage ends.
Value 0 means that the backup SSIDs will stay up
indefinitely."
::= { trpzApConfServiceProfileEntry 55 }
trpzApConfServProfBackupSsidKeepClients OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the existing client sessions
at a remote site will be kept or not when central site
outage occurs."
::= { trpzApConfServiceProfileEntry 56 }
trpzApConfServProfWebPortalLogoutForm OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The custom logout page that will be displayed for
Web Portal users, for this service profile.
An empty string means that the default page will be displayed."
::= { trpzApConfServiceProfileEntry 57 }
-- ==========================
-- Snoop Filter table
trpzApConfSnoopFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the Snoop Filters
currently configured on this AC."
::= { trpzApConfigMibObjects 10 }
trpzApConfSnoopFilterEntry OBJECT-TYPE
SYNTAX TrpzApConfSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular Snoop Filter."
INDEX { trpzApConfSnoopFilterName }
::= { trpzApConfSnoopFilterTable 1 }
TrpzApConfSnoopFilterEntry ::= SEQUENCE {
trpzApConfSnoopFilterName TrpzSnoopFilterName,
trpzApConfSnoopFilterEnabled TruthValue,
trpzApConfSnoopFilterObserverAddrType InetAddressType,
trpzApConfSnoopFilterObserverAddr InetAddress
}
trpzApConfSnoopFilterName OBJECT-TYPE
SYNTAX TrpzSnoopFilterName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this snoop filter."
::= { trpzApConfSnoopFilterEntry 1 }
trpzApConfSnoopFilterEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this snoop filter is enabled."
::= { trpzApConfSnoopFilterEntry 2 }
trpzApConfSnoopFilterObserverAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of 'trpzApConfSnoopFilterObserverAddr'.
If no snoop observer is configured for a particular
filter, this object will return 'unknown(0)' for that
filter."
::= { trpzApConfSnoopFilterEntry 3 }
trpzApConfSnoopFilterObserverAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the snoop observer.
If no observer is configured for a particular snoop filter,
this object will return an empty string for that filter.
The type of this address is specified in
'trpzApConfSnoopFilterObserverAddrType'."
::= { trpzApConfSnoopFilterEntry 4 }
-- =================================================
-- Table for Snoop Filters associated with AP Radios
trpzApConfRadioSnoopFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRadioSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the associations of Snoop Filters
with AP radios."
::= { trpzApConfigMibObjects 11 }
trpzApConfRadioSnoopFilterEntry OBJECT-TYPE
SYNTAX TrpzApConfRadioSnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multiple snoop filters can be associated with one AP radio.
A snoop filter can be associated with multiple AP radios.
A combination of an AP number, a radio number and
a filter name uniquely identifies the mapping of
a filter to a specific radio."
INDEX { trpzApConfRadioConfigApNum,
trpzApConfRadioConfigRadioIndex,
trpzApConfSnoopFilterName }
::= { trpzApConfRadioSnoopFilterTable 1 }
TrpzApConfRadioSnoopFilterEntry ::= SEQUENCE {
trpzApConfRadioSnoopFilterRowStatus RowStatus
}
trpzApConfRadioSnoopFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or
delete an existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
Only these two values 'createAndGo' and 'destroy'
will be accepted."
::= { trpzApConfRadioSnoopFilterEntry 1 }
-- ==========================
-- Snoop Observer table
trpzApConfSnoopObserverTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfSnoopObserverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the snoop observers
currently configured on the AC.
Snoop observers are hosts where snooped packets
are sent."
::= { trpzApConfigMibObjects 12 }
trpzApConfSnoopObserverEntry OBJECT-TYPE
SYNTAX TrpzApConfSnoopObserverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration of a particular snoop observer."
INDEX { trpzApConfSnoopObserverTargetAddrType,
trpzApConfSnoopObserverTargetAddr }
::= { trpzApConfSnoopObserverTable 1 }
TrpzApConfSnoopObserverEntry ::= SEQUENCE {
trpzApConfSnoopObserverTargetAddrType InetAddressType,
trpzApConfSnoopObserverTargetAddr InetAddress,
trpzApConfSnoopObserverSnapLength Unsigned32,
trpzApConfSnoopObserverInterval Unsigned32,
trpzApConfSnoopObserverTxMode TrpzSnoopObserverTxMode
}
trpzApConfSnoopObserverTargetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of 'trpzApConfSnoopObserverTargetAddr'."
::= { trpzApConfSnoopObserverEntry 1 }
trpzApConfSnoopObserverTargetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the snoop observer.
The type of this address is specified in
'trpzApConfSnoopObserverTargetAddrType'."
::= { trpzApConfSnoopObserverEntry 2 }
trpzApConfSnoopObserverSnapLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum number of bytes from a filtered
packet to be encapsulated in TZSP and sent to the observer.
Value 0 means that the entire packet is copied and
sent to the observer."
::= { trpzApConfSnoopObserverEntry 3 }
trpzApConfSnoopObserverInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the snooping interval, in milliseconds,
for the packets with the same source.
Value 0 means no rate limit."
::= { trpzApConfSnoopObserverEntry 4 }
trpzApConfSnoopObserverTxMode OBJECT-TYPE
SYNTAX TrpzSnoopObserverTxMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of transmission of snoop packets
to this observer."
::= { trpzApConfSnoopObserverEntry 5 }
-- ==========================
-- Remote Site table
trpzApConfRemoteSiteTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRemoteSiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the remote sites
currently configured on the AC.
A remote site is a group of APs situated in the same
location (site/branch), other than the location
of the controller."
::= { trpzApConfigMibObjects 13 }
trpzApConfRemoteSiteEntry OBJECT-TYPE
SYNTAX TrpzApConfRemoteSiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description of a remote site
currently configured on the AC."
INDEX { trpzApConfRemoteSiteName }
::= { trpzApConfRemoteSiteTable 1 }
TrpzApConfRemoteSiteEntry ::= SEQUENCE {
trpzApConfRemoteSiteName DisplayString,
trpzApConfRemoteSiteCountryCode DisplayString,
trpzApConfRemoteSitePathMtu Unsigned32,
trpzApConfRemoteSiteBackupSsidsEnabled TruthValue,
trpzApConfRemoteSiteLogServerEnabled TruthValue,
trpzApConfRemoteSiteLogServerAddrType InetAddressType,
trpzApConfRemoteSiteLogServerAddr InetAddress,
trpzApConfRemoteSiteLogServerPort Unsigned32,
trpzApConfRemoteSiteLogServerSeverity TrpzSyslogSeverity,
trpzApConfRemoteSiteAcPollingEnabled TruthValue,
trpzApConfRemoteSiteRadiusServerGroupName DisplayString,
trpzApConfRemoteSiteRadiusDeadtime Unsigned32,
trpzApConfRemoteSiteRadiusTimeout Unsigned32,
trpzApConfRemoteSiteRadiusRetransmit Unsigned32,
trpzApConfRemoteSiteRadiusNasIdType TrpzApRadiusNasIdType
}
trpzApConfRemoteSiteName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the remote site."
::= { trpzApConfRemoteSiteEntry 1 }
trpzApConfRemoteSiteCountryCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (2|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the country code used for the configuration
of the APs at the remote site.
The system country code is used by default, in which case
this object will return the special value 'NONE'."
::= { trpzApConfRemoteSiteEntry 2 }
trpzApConfRemoteSitePathMtu OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured MTU between the APs at the remote site
and the ACs at the central site.
The value 0 means that the MTU was not administratively configured."
::= { trpzApConfRemoteSiteEntry 3 }
trpzApConfRemoteSiteBackupSsidsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the backup SSIDs at this remote site
are enabled or not.
Backup SSIDs allow access to new clients
when central site outage occurs."
::= { trpzApConfRemoteSiteEntry 4 }
trpzApConfRemoteSiteLogServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the APs at the remote site
will send syslog messages to a log server."
::= { trpzApConfRemoteSiteEntry 5 }
trpzApConfRemoteSiteLogServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of 'trpzApConfRemoteSiteLogServerAddr'."
::= { trpzApConfRemoteSiteEntry 6 }
trpzApConfRemoteSiteLogServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the log server used by the APs
in the remote site.
The type of this address is specified in
'trpzApConfRemoteSiteLogServerAddrType'."
::= { trpzApConfRemoteSiteEntry 7 }
trpzApConfRemoteSiteLogServerPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the log server used by the APs
in the remote site."
::= { trpzApConfRemoteSiteEntry 8 }
trpzApConfRemoteSiteLogServerSeverity OBJECT-TYPE
SYNTAX TrpzSyslogSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum severity of the messages sent
by the APs in the remote site to the syslog server."
::= { trpzApConfRemoteSiteEntry 9 }
trpzApConfRemoteSiteAcPollingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the AC can poll the APs in this remote site
to obtain full information about the AP-managed client sessions.
When it is 'false(2)', the AC has limited information
about the AP-managed sessions in this remote site."
::= { trpzApConfRemoteSiteEntry 10 }
trpzApConfRemoteSiteRadiusServerGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the group of RADIUS servers
used in the remote site.
An empty string means that no RADIUS server group
has been configured for the remote site."
::= { trpzApConfRemoteSiteEntry 11 }
trpzApConfRemoteSiteRadiusDeadtime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The deadtime value configured for the RADIUS server group
of this remote site.
This value has precedence over the individual deadtime values
of each server in the server group.
If RADIUS deadtime is not configured for this remote site,
this object will not have an instance in the current row."
::= { trpzApConfRemoteSiteEntry 12 }
trpzApConfRemoteSiteRadiusTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout value configured for the RADIUS server group
of this remote site.
This value has precedence over the individual timeout values
of each server in the server group.
If RADIUS timeout is not configured for this remote site,
this object will not have an instance in the current row."
::= { trpzApConfRemoteSiteEntry 13 }
trpzApConfRemoteSiteRadiusRetransmit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The retransmit value configured for the RADIUS server group
of this remote site.
This value has precedence over the individual retransmit values
of each server in the server group.
If RADIUS retransmit is not configured for this remote site,
this object will not have an instance in the current row."
::= { trpzApConfRemoteSiteEntry 14 }
trpzApConfRemoteSiteRadiusNasIdType OBJECT-TYPE
SYNTAX TrpzApRadiusNasIdType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-ID type configured for the RADIUS server group
of this remote site."
::= { trpzApConfRemoteSiteEntry 15 }
-- ==========================
-- Radio Profile 32 table
trpzApConfRadioProfile32Table OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRadioProfile32Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the Radio Profiles
currently configured on this AC.
Deprecates trpzApConfRadioProfileTable."
::= { trpzApConfigMibObjects 14 }
trpzApConfRadioProfile32Entry OBJECT-TYPE
SYNTAX TrpzApConfRadioProfile32Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration for a particular Radio Profile."
INDEX { trpzApConfRadioProf32RadioProfileName }
::= { trpzApConfRadioProfile32Table 1 }
TrpzApConfRadioProfile32Entry ::= SEQUENCE {
trpzApConfRadioProf32RadioProfileName TrpzRadioProfileName32,
trpzApConfRadioProf32BeaconInterval Unsigned32,
trpzApConfRadioProf32DtimInterval Unsigned32,
trpzApConfRadioProf32ChannelWidth11na TrpzRadioChannelWidth,
trpzApConfRadioProf32MaxTxLifetime Unsigned32,
trpzApConfRadioProf32MaxRxLifetime Unsigned32,
trpzApConfRadioProf32RtsThreshold Unsigned32,
trpzApConfRadioProf32FragThreshold Unsigned32,
trpzApConfRadioProf32LongXmitPreambleEnabled TruthValue,
trpzApConfRadioProf32CountermeasuresMode TrpzRadioProfileCountermeasuresMode,
trpzApConfRadioProf32RFScanMode TrpzRadioProfileRFScanMode,
trpzApConfRadioProf32RFScanChannelScope TrpzRadioProfileRFScanChannelScope,
trpzApConfRadioProf32RFScanCTSEnabled TruthValue,
trpzApConfRadioProf32AutoTunePowerEnabled TruthValue,
trpzApConfRadioProf32AutoTunePowerRampInterval Unsigned32,
trpzApConfRadioProf32AutoTunePowerChangeInterval Unsigned32,
trpzApConfRadioProf32FairQueuingEnabled TruthValue,
trpzApConfRadioProf32CacBackgroundACMandatory TruthValue,
trpzApConfRadioProf32CacBackgroundMaxUtilization Unsigned32,
trpzApConfRadioProf32CacBackgroundPolicingEnabled TruthValue,
trpzApConfRadioProf32CacBestEffortACMandatory TruthValue,
trpzApConfRadioProf32CacBestEffortMaxUtilization Unsigned32,
trpzApConfRadioProf32CacBestEffortPolicingEnabled TruthValue,
trpzApConfRadioProf32CacVideoACMandatory TruthValue,
trpzApConfRadioProf32CacVideoMaxUtilization Unsigned32,
trpzApConfRadioProf32CacVideoPolicingEnabled TruthValue,
trpzApConfRadioProf32CacVoiceACMandatory TruthValue,
trpzApConfRadioProf32CacVoiceMaxUtilization Unsigned32,
trpzApConfRadioProf32CacVoicePolicingEnabled TruthValue,
trpzApConfRadioProf32RfidTagEnabled TruthValue,
trpzApConfRadioProf32WmmPowerSaveEnabled TruthValue,
trpzApConfRadioProf32RateEnforcementEnabled TruthValue,
trpzApConfRadioProf32DfsChannelsEnabled TruthValue,
trpzApConfRadioProf32RFSpectralScanModeEnabled TruthValue,
trpzApConfRadioProf32RFSpectralScanPriority TrpzRadioProfileRFSpectralScanPriority
}
trpzApConfRadioProf32RadioProfileName OBJECT-TYPE
SYNTAX TrpzRadioProfileName32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this radio profile."
::= { trpzApConfRadioProfile32Entry 1 }
trpzApConfRadioProf32BeaconInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Beacon Interval, time in thousandths of a second,
for this radio profile."
::= { trpzApConfRadioProfile32Entry 2 }
trpzApConfRadioProf32DtimInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times after every beacon
that each AP radio in a radio profile sends a
delivery traffic indication map (DTIM),
for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 3 }
trpzApConfRadioProf32ChannelWidth11na OBJECT-TYPE
SYNTAX TrpzRadioChannelWidth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.11n Channel Width for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 4 }
trpzApConfRadioProf32MaxTxLifetime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum transmit threshold for the
AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 5 }
trpzApConfRadioProf32MaxRxLifetime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum receive threshold for the
AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 6 }
trpzApConfRadioProf32RtsThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RTS threshold for the AP radios using
this radio profile."
::= { trpzApConfRadioProfile32Entry 7 }
trpzApConfRadioProf32FragThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fragmentation threshold for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 8 }
trpzApConfRadioProf32LongXmitPreambleEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether an 802.11b/g AP radio using
this radio profile transmits Long Preamble."
::= { trpzApConfRadioProfile32Entry 9 }
trpzApConfRadioProf32CountermeasuresMode OBJECT-TYPE
SYNTAX TrpzRadioProfileCountermeasuresMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Countermeasures Mode for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 10 }
trpzApConfRadioProf32RFScanMode OBJECT-TYPE
SYNTAX TrpzRadioProfileRFScanMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF Scanning Mode for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 11 }
trpzApConfRadioProf32RFScanChannelScope OBJECT-TYPE
SYNTAX TrpzRadioProfileRFScanChannelScope
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF scanning Channel Scope for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 12 }
trpzApConfRadioProf32RFScanCTSEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the AP radios using this radio profile
send CTS To Self packet before going off channel."
::= { trpzApConfRadioProfile32Entry 13 }
trpzApConfRadioProf32AutoTunePowerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Power Auto-Tuning is enabled
for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 14 }
trpzApConfRadioProf32AutoTunePowerRampInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum Interval (in seconds) between Power changes
due to Auto-Tuning, for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 15 }
trpzApConfRadioProf32AutoTunePowerChangeInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval (in seconds) at which RF Auto-Tuning
decides whether to Change the Power for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 16 }
trpzApConfRadioProf32FairQueuingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether weighted Fair Queuing is enabled
for this radio profile."
::= { trpzApConfRadioProfile32Entry 17 }
trpzApConfRadioProf32CacBackgroundACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Admission Control for Background traffic
is Mandatory for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 18 }
trpzApConfRadioProf32CacBackgroundMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum admission control limit for Background traffic,
for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 19 }
trpzApConfRadioProf32CacBackgroundPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that admission control Policing for
Background traffic is enabled, for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 20 }
trpzApConfRadioProf32CacBestEffortACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that Admission Control for Best Effort traffic
is Mandatory for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 21 }
trpzApConfRadioProf32CacBestEffortMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum admission control limit for Best Effort traffic,
for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 22 }
trpzApConfRadioProf32CacBestEffortPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that admission control Policing for
Best Effort traffic is enabled, for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 23 }
trpzApConfRadioProf32CacVideoACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that Admission Control for Video traffic
is Mandatory for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 24 }
trpzApConfRadioProf32CacVideoMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum admission control limit for Video traffic,
for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 25 }
trpzApConfRadioProf32CacVideoPolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that admission control Policing for
Video traffic is enabled, for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 26 }
trpzApConfRadioProf32CacVoiceACMandatory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that Admission Control for Voice traffic
is Mandatory for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 27 }
trpzApConfRadioProf32CacVoiceMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum admission control limit for Voice traffic,
for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 28 }
trpzApConfRadioProf32CacVoicePolicingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that admission control Policing for
Voice traffic is enabled, for the AP radios
using this radio profile."
::= { trpzApConfRadioProfile32Entry 29 }
trpzApConfRadioProf32RfidTagEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether an AP radio using this radio profile
is enabled to function as location receivers in an AeroScout
Visibility System."
::= { trpzApConfRadioProfile32Entry 30 }
trpzApConfRadioProf32WmmPowerSaveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the AP radios using this radio profile
enable power save mode on WMM clients."
::= { trpzApConfRadioProfile32Entry 31 }
trpzApConfRadioProf32RateEnforcementEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether data rates are enforced for the AP radios
using this radio profile, which means
that a connecting client must transmit at one of the
mandatory or standard rates in order to associate
with the AP."
::= { trpzApConfRadioProfile32Entry 32 }
trpzApConfRadioProf32DfsChannelsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that the AP radios using this radio profile
use DFS channels to meet regulatory requirements."
::= { trpzApConfRadioProfile32Entry 33 }
trpzApConfRadioProf32RFSpectralScanModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Spectral Scanning Mode is enabled
for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 34 }
trpzApConfRadioProf32RFSpectralScanPriority OBJECT-TYPE
SYNTAX TrpzRadioProfileRFSpectralScanPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Priority when a Spectral Scan sample time arrives
for the AP radios using this radio profile."
::= { trpzApConfRadioProfile32Entry 35 }
-- =====================================================
-- Table for Service Profiles connected to Radio Profile
trpzApConfRadioProf32ServiceProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRadioProf32ServiceProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the currently configured connections
between Radio Profiles and Service Profiles.
Deprecates trpzApConfRadioProfServiceProfileTable."
::= { trpzApConfigMibObjects 15 }
trpzApConfRadioProf32ServiceProfileEntry OBJECT-TYPE
SYNTAX TrpzApConfRadioProf32ServiceProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Connection between a Radio Profile and a Service Profile,
currently configured on the AC."
INDEX { trpzApConfRp32ServpRadioProfileName,
trpzApConfRp32ServpServiceProfileName }
::= { trpzApConfRadioProf32ServiceProfileTable 1 }
TrpzApConfRadioProf32ServiceProfileEntry ::= SEQUENCE {
trpzApConfRp32ServpRadioProfileName TrpzRadioProfileName32,
trpzApConfRp32ServpServiceProfileName TrpzServiceProfileName,
trpzApConfRp32ServpRowStatus RowStatus
}
trpzApConfRp32ServpRadioProfileName OBJECT-TYPE
SYNTAX TrpzRadioProfileName32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this Radio Profile."
::= { trpzApConfRadioProf32ServiceProfileEntry 1 }
trpzApConfRp32ServpServiceProfileName OBJECT-TYPE
SYNTAX TrpzServiceProfileName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of a Service Profile connected to
this Radio Profile."
::= { trpzApConfRadioProf32ServiceProfileEntry 2 }
trpzApConfRp32ServpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or
delete an existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
Only these two values 'createAndGo' and 'destroy'
will be accepted."
::= { trpzApConfRadioProf32ServiceProfileEntry 3 }
-- ==================================================
-- Table for Snoop Filters connected to Radio Profile
trpzApConfRadioProf32SnoopFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrpzApConfRadioProf32SnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing the currently configured connections
between Radio Profiles and Snoop Filters.
Deprecates trpzApConfRadioProfSnoopFilterTable."
::= { trpzApConfigMibObjects 16 }
trpzApConfRadioProf32SnoopFilterEntry OBJECT-TYPE
SYNTAX TrpzApConfRadioProf32SnoopFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Connection between a Radio Profile and a Snoop Filter,
currently configured on the AC."
INDEX { trpzApConfRp32SnoopfRadioProfileName,
trpzApConfRp32SnoopfSnoopFilterName }
::= { trpzApConfRadioProf32SnoopFilterTable 1 }
TrpzApConfRadioProf32SnoopFilterEntry ::= SEQUENCE {
trpzApConfRp32SnoopfRadioProfileName TrpzRadioProfileName32,
trpzApConfRp32SnoopfSnoopFilterName TrpzSnoopFilterName,
trpzApConfRp32SnoopfRowStatus RowStatus
}
trpzApConfRp32SnoopfRadioProfileName OBJECT-TYPE
SYNTAX TrpzRadioProfileName32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of this Radio Profile."
::= { trpzApConfRadioProf32SnoopFilterEntry 1 }
trpzApConfRp32SnoopfSnoopFilterName OBJECT-TYPE
SYNTAX TrpzSnoopFilterName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of a Snoop Filter connected to
this Radio Profile."
::= { trpzApConfRadioProf32SnoopFilterEntry 2 }
trpzApConfRp32SnoopfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or
delete an existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
Only these two values 'createAndGo' and 'destroy'
will be accepted."
::= { trpzApConfRadioProf32SnoopFilterEntry 3 }
-- ============================================================================
--
-- Conformance
--
trpzApConfigConformance OBJECT IDENTIFIER ::= { trpzApConfigMib 2 }
trpzApConfigCompliances OBJECT IDENTIFIER ::= { trpzApConfigConformance 1 }
trpzApConfigGroups OBJECT IDENTIFIER ::= { trpzApConfigConformance 2 }
-- Compliance
trpzApConfigCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for devices that implement AP Config MIB."
MODULE -- this module (trpzApConfigMib)
MANDATORY-GROUPS {
trpzApConfApConfigTableGroup,
trpzApConfRadioConfigTableGroup,
trpzApConfApTemplateConfigTableGroup,
trpzApConfApTemplateRadioConfigTableGroup,
trpzApConfRadioProfileTableGroup,
trpzApConfRadioProfServiceProfileTableGroup,
trpzApConfRadioProfSnoopFilterTableGroup,
trpzApConfServiceProfileTableGroup,
trpzApConfSnoopFilterTableGroup
}
OBJECT trpzApConfRpServpRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProfServiceProfileTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
In release 7.1 only read access is implemented."
OBJECT trpzApConfRpSnoopfRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProfSnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
In release 7.1 only read access is implemented."
::= { trpzApConfigCompliances 1 }
trpzApConfigComplianceRev2 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for devices that implement AP Config MIB.
This compliance statement is for releases 7.5 to 7.6
of AC (wireless switch) software.
This compliance statement is replaced by trpzApConfigComplianceRev3."
MODULE -- this module (trpzApConfigMib)
MANDATORY-GROUPS {
trpzApConfApConfigTableGroup,
trpzApConfApConfigLldpGroup,
trpzApConfApConfigTunnelGroup,
trpzApConfApConfigRemoteApGroup,
trpzApConfRadioConfigTableGroup,
trpzApConfApTemplateConfigTableGroup,
trpzApConfApTemplateRadioConfigTableGroup,
trpzApConfRadioProfileTableGroup,
trpzApConfRadioProfileRFSpectralScanGroup,
trpzApConfRadioProfServiceProfileTableGroup,
trpzApConfRadioProfSnoopFilterTableGroup,
trpzApConfServiceProfileTableGroupRev2,
trpzApConfSnoopFilterTableGroup
}
OBJECT trpzApConfRpServpRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProfServiceProfileTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
OBJECT trpzApConfRpSnoopfRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProfSnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
::= { trpzApConfigCompliances 2 }
trpzApConfigComplianceRev3 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for devices that implement AP Config MIB.
This compliance statement is for release 7.7
of AC (wireless switch) software.
This compliance statement is replaced by trpzApConfigComplianceRev4."
MODULE -- this module (trpzApConfigMib)
MANDATORY-GROUPS {
trpzApConfApConfigTableGroupRev2,
trpzApConfApConfigLldpGroup,
trpzApConfApConfigTunnelGroup,
trpzApConfApConfigRemoteApGroup,
trpzApConfRadioConfigTableGroup,
trpzApConfApTemplateConfigTableGroup,
trpzApConfApTemplateRadioConfigTableGroup,
trpzApConfRadioProfileTableGroup,
trpzApConfRadioProfileRFSpectralScanGroup,
trpzApConfRadioProfServiceProfileTableGroup,
trpzApConfRadioProfSnoopFilterTableGroup,
trpzApConfSnoopFilterTableGroupRev2,
trpzApConfRadioSnoopFilterTableGroup,
trpzApConfSnoopObserverTableGroup,
trpzApConfServiceProfileTableGroupRev3,
trpzApConfRemoteSiteTableGroup
}
OBJECT trpzApConfRpServpRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProfServiceProfileTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
OBJECT trpzApConfRpSnoopfRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProfSnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
OBJECT trpzApConfRadioSnoopFilterRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioSnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
::= { trpzApConfigCompliances 3 }
trpzApConfigComplianceRev4 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for devices that implement AP Config MIB.
This compliance statement is for release 8.0
of AC (wireless switch) software.
This compliance statement is replaced by trpzApConfigComplianceRev5."
MODULE -- this module (trpzApConfigMib)
MANDATORY-GROUPS {
trpzApConfApConfigTableGroupRev2,
trpzApConfApConfigLldpGroup,
trpzApConfApConfigTunnelGroup,
trpzApConfApConfigRemoteApGroup,
trpzApConfRadioConfigTableGroup,
trpzApConfApTemplateConfigTableGroup,
trpzApConfApTemplateRadioConfigTableGroup,
trpzApConfRadioProfileTableGroupRev2,
trpzApConfRadioProfileRFSpectralScanGroup,
trpzApConfRadioProfServiceProfileTableGroup,
trpzApConfRadioProfSnoopFilterTableGroup,
trpzApConfSnoopFilterTableGroupRev2,
trpzApConfRadioSnoopFilterTableGroup,
trpzApConfSnoopObserverTableGroup,
trpzApConfServiceProfileTableGroupRev3,
trpzApConfRemoteSiteTableGroup
}
OBJECT trpzApConfRpServpRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProfServiceProfileTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
OBJECT trpzApConfRpSnoopfRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProfSnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
OBJECT trpzApConfRadioSnoopFilterRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioSnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
::= { trpzApConfigCompliances 4 }
trpzApConfigComplianceRev5 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement AP Config MIB.
This compliance statement is for releases 9.0 and greater
of AC (wireless switch) software."
MODULE -- this module (trpzApConfigMib)
MANDATORY-GROUPS {
trpzApConfApConfigLldpGroup,
trpzApConfApConfigTunnelGroup,
trpzApConfApConfigRemoteApGroup,
trpzApConfApTemplateConfigTableGroup,
trpzApConfSnoopFilterTableGroupRev2,
trpzApConfRadioSnoopFilterTableGroup,
trpzApConfSnoopObserverTableGroup,
trpzApConfServiceProfileTableGroupRev3,
trpzApConfApConfigTableGroupRev3,
trpzApConfRadioConfigTableGroupRev2,
trpzApConfApTemplateRadioConfigTableGroupRev2,
trpzApConfRadioProfile32TableGroup,
trpzApConfRadioProfileRFSpectralScanGroupRev2,
trpzApConfRadioProf32ServiceProfileTableGroup,
trpzApConfRadioProf32SnoopFilterTableGroup,
trpzApConfRemoteSiteTableGroupRev2
}
OBJECT trpzApConfRadioSnoopFilterRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioSnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
OBJECT trpzApConfRp32ServpRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProf32ServiceProfileTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
OBJECT trpzApConfRp32SnoopfRowStatus
SYNTAX INTEGER {
active(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
trpzApConfRadioProf32SnoopFilterTable
is not required.
Support of the values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), and destroy(6)
is not required.
Even if create/delete access is supported, the states
notInService(2), notReady(3) and createAndWait(5)
need not be supported.
Only read access is implemented."
::= { trpzApConfigCompliances 5 }
-- Units of Conformance
trpzApConfApConfigTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfApConfigApAttachType,
trpzApConfApConfigPhysPortNum,
trpzApConfApConfigApSerialNum,
trpzApConfApConfigApModelName,
trpzApConfApConfigFingerprint,
trpzApConfApConfigBias,
trpzApConfApConfigApTimeout,
trpzApConfApConfigApName,
trpzApConfApConfigContact,
trpzApConfApConfigLocation,
trpzApConfApConfigBlinkEnabled,
trpzApConfApConfigForceImageDownloadEnabled,
trpzApConfApConfigFirmwareUpgradeEnabled,
trpzApConfApConfigLocalSwitchingEnabled,
trpzApConfApConfigPowerMode,
trpzApConfApConfigLedMode,
trpzApConfApConfigDescription
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
AP Configuration info in releases 7.1 to 7.6.
Replaced by trpzApConfApConfigTableGroupRev2."
::= { trpzApConfigGroups 1 }
trpzApConfRadioConfigTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRadioConfigRadioType,
trpzApConfRadioConfigRadioMode,
trpzApConfRadioConfigRadioProfileName,
trpzApConfRadioConfigChannel,
trpzApConfRadioConfigTxPower,
trpzApConfRadioConfigAutoTuneMaxTxPower,
trpzApConfRadioConfigAntennaType,
trpzApConfRadioConfigAntennaLocation,
trpzApConfRadioConfigLoadBalancingEnabled,
trpzApConfRadioConfigLoadBalancingGroup,
trpzApConfRadioConfigLoadRebalancingEnabled
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Configuration info in releases 7.1 to 8.0.
Replaced by trpzApConfRadioConfigTableGroupRev2."
::= { trpzApConfigGroups 2 }
trpzApConfApTemplateConfigTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfApTemplConfApTemplateEnabled,
trpzApConfApTemplConfBias,
trpzApConfApTemplConfApTimeout,
trpzApConfApTemplConfBlinkEnabled,
trpzApConfApTemplConfForceImageDownloadEnabled,
trpzApConfApTemplConfFirmwareUpgradeEnabled,
trpzApConfApTemplConfLocalSwitchingEnabled,
trpzApConfApTemplConfPowerMode,
trpzApConfApTemplConfLedMode
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
AP Configuration Template info in releases 7.1 and greater."
::= { trpzApConfigGroups 3 }
trpzApConfApTemplateRadioConfigTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfApTemRadioConfRadioMode,
trpzApConfApTemRadioConfRadioProfileName,
trpzApConfApTemRadioConfAutoTuneMaxTxPower,
trpzApConfApTemRadioConfLoadBalancingEnabled,
trpzApConfApTemRadioConfLoadBalancingGroup,
trpzApConfApTemRadioConfLoadRebalancingEnabled
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Configuration Template info in releases 7.1 to 8.0.
Replaced by trpzApConfApTemplateRadioConfigTableGroupRev2."
::= { trpzApConfigGroups 4 }
trpzApConfRadioProfileTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRadioProfBeaconInterval,
trpzApConfRadioProfDtimInterval,
trpzApConfRadioProfChannelWidth11na,
trpzApConfRadioProfMaxTxLifetime,
trpzApConfRadioProfMaxRxLifetime,
trpzApConfRadioProfRtsThreshold,
trpzApConfRadioProfFragThreshold,
trpzApConfRadioProfLongXmitPreambleEnabled,
trpzApConfRadioProfCountermeasuresMode,
trpzApConfRadioProfRFScanMode,
trpzApConfRadioProfRFScanChannelScope,
trpzApConfRadioProfRFScanCTSEnabled,
trpzApConfRadioProfAutoTune11aChannelRange,
trpzApConfRadioProfAutoTuneIgnoreClientsEnabled,
trpzApConfRadioProfAutoTuneChannelEnabled,
trpzApConfRadioProfAutoTuneChannelHolddownInterval,
trpzApConfRadioProfAutoTuneChannelChangeInterval,
trpzApConfRadioProfAutoTunePowerEnabled,
trpzApConfRadioProfAutoTunePowerRampInterval,
trpzApConfRadioProfAutoTunePowerChangeInterval,
trpzApConfRadioProfFairQueuingEnabled,
trpzApConfRadioProfCacBackgroundACMandatory,
trpzApConfRadioProfCacBackgroundMaxUtilization,
trpzApConfRadioProfCacBackgroundPolicingEnabled,
trpzApConfRadioProfCacBestEffortACMandatory,
trpzApConfRadioProfCacBestEffortMaxUtilization,
trpzApConfRadioProfCacBestEffortPolicingEnabled,
trpzApConfRadioProfCacVideoACMandatory,
trpzApConfRadioProfCacVideoMaxUtilization,
trpzApConfRadioProfCacVideoPolicingEnabled,
trpzApConfRadioProfCacVoiceACMandatory,
trpzApConfRadioProfCacVoiceMaxUtilization,
trpzApConfRadioProfCacVoicePolicingEnabled,
trpzApConfRadioProfRfidTagEnabled,
trpzApConfRadioProfWmmPowerSaveEnabled,
trpzApConfRadioProfRateEnforcementEnabled,
trpzApConfRadioProfDfsChannelsEnabled
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Profile configuration info in releases 7.1 to 7.7.
Replaced by trpzApConfRadioProfileTableGroupRev2."
::= { trpzApConfigGroups 5 }
trpzApConfRadioProfServiceProfileTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRpServpRowStatus
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Service Profiles associated to each Radio Profile
in releases 7.1 to 8.0.
Replaced by trpzApConfRadioProf32ServiceProfileTableGroup."
::= { trpzApConfigGroups 6 }
trpzApConfRadioProfSnoopFilterTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRpSnoopfRowStatus
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Snoop Filters associated to each Radio Profile
in releases 7.1 to 8.0.
Replaced by trpzApConfRadioProf32SnoopFilterTableGroup."
::= { trpzApConfigGroups 7 }
trpzApConfServiceProfileTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfServProfSsidType,
trpzApConfServProfBeaconEnabled,
trpzApConfServProf11naMode,
trpzApConfServProf11ngMode,
trpzApConfServProf11nShortGuardIntervalEnabled,
trpzApConfServProf11nFrameAggregation,
trpzApConfServProf11nMsduMaxLength,
trpzApConfServProf11nMpduMaxLength,
trpzApConfServProfAuthFallthru,
trpzApConfServProfWebAAAForm,
trpzApConfServProfSharedKeyAuthEnabled,
trpzApConfServProfWpaIeEnabled,
trpzApConfServProfWpaIeCipherTkipEnabled,
trpzApConfServProfWpaIeCipherCcmpEnabled,
trpzApConfServProfWpaIeCipherWep40Enabled,
trpzApConfServProfWpaIeCipherWep104Enabled,
trpzApConfServProfWpaIeAuthDot1xEnabled,
trpzApConfServProfWpaIeAuthPskEnabled,
trpzApConfServProfRsnIeEnabled,
trpzApConfServProfRsnIeCipherTkipEnabled,
trpzApConfServProfRsnIeCipherCcmpEnabled,
trpzApConfServProfRsnIeCipherWep40Enabled,
trpzApConfServProfRsnIeCipherWep104Enabled,
trpzApConfServProfRsnIeAuthDot1xEnabled,
trpzApConfServProfRsnIeAuthPskEnabled,
trpzApConfServProfTkipMicCountermeasuresTime,
trpzApConfServProfMaxBandwidthKbps,
trpzApConfServProfCacMode,
trpzApConfServProfCacSessCount,
trpzApConfServProfUserIdleTimeout,
trpzApConfServProfIdleClientProbingEnabled,
trpzApConfServProfShortRetryCount,
trpzApConfServProfLongRetryCount,
trpzApConfServProfProxyArpEnabled,
trpzApConfServProfDhcpRestrictEnabled,
trpzApConfServProfNoBroadcastEnabled,
trpzApConfServProfSygateOnDemandEnabled,
trpzApConfServProfEnforceChecksEnabled,
trpzApConfServProfSodaRemediationAcl,
trpzApConfServProfSodaSuccessPage,
trpzApConfServProfSodaFailurePage,
trpzApConfServProfSodaLogoutPage,
trpzApConfServProfSodaAgentDirectory,
trpzApConfServProfWebPortalSessionTimeout,
trpzApConfServProfWebPortalAcl,
trpzApConfServProfWebPortalLogoutEnabled,
trpzApConfServProfWebPortalLogoutUrl,
trpzApConfServProfKeepInitialVlanEnabled,
trpzApConfServProfMeshModeEnabled,
trpzApConfServProfBridgingEnabled,
trpzApConfServProfLoadBalanceExemptEnabled
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Service Profile configuration info in releases 7.1 and greater."
::= { trpzApConfigGroups 8 }
trpzApConfSnoopFilterTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfSnoopFilterEnabled
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Snoop Filter configuration info in releases 7.1 to 7.6.
Replaced by trpzApConfSnoopFilterTableGroupRev2."
::= { trpzApConfigGroups 9 }
trpzApConfServiceProfileTableGroupRev2 OBJECT-GROUP
OBJECTS {
trpzApConfServProfSsidType,
trpzApConfServProfBeaconEnabled,
trpzApConfServProf11naMode,
trpzApConfServProf11ngMode,
trpzApConfServProf11nShortGuardIntervalEnabled,
trpzApConfServProf11nFrameAggregation,
trpzApConfServProf11nMsduMaxLength,
trpzApConfServProf11nMpduMaxLength,
trpzApConfServProfAuthFallthru,
trpzApConfServProfWebAAAForm,
trpzApConfServProfSharedKeyAuthEnabled,
trpzApConfServProfWpaIeEnabled,
trpzApConfServProfWpaIeCipherTkipEnabled,
trpzApConfServProfWpaIeCipherCcmpEnabled,
trpzApConfServProfWpaIeAuthDot1xEnabled,
trpzApConfServProfWpaIeAuthPskEnabled,
trpzApConfServProfRsnIeEnabled,
trpzApConfServProfRsnIeCipherTkipEnabled,
trpzApConfServProfRsnIeCipherCcmpEnabled,
trpzApConfServProfRsnIeAuthDot1xEnabled,
trpzApConfServProfRsnIeAuthPskEnabled,
trpzApConfServProfTkipMicCountermeasuresTime,
trpzApConfServProfMaxBandwidthKbps,
trpzApConfServProfCacMode,
trpzApConfServProfCacSessCount,
trpzApConfServProfUserIdleTimeout,
trpzApConfServProfIdleClientProbingEnabled,
trpzApConfServProfShortRetryCount,
trpzApConfServProfLongRetryCount,
trpzApConfServProfProxyArpEnabled,
trpzApConfServProfDhcpRestrictEnabled,
trpzApConfServProfNoBroadcastEnabled,
trpzApConfServProfSygateOnDemandEnabled,
trpzApConfServProfEnforceChecksEnabled,
trpzApConfServProfSodaRemediationAcl,
trpzApConfServProfSodaSuccessPage,
trpzApConfServProfSodaFailurePage,
trpzApConfServProfSodaLogoutPage,
trpzApConfServProfSodaAgentDirectory,
trpzApConfServProfWebPortalSessionTimeout,
trpzApConfServProfWebPortalAcl,
trpzApConfServProfWebPortalLogoutEnabled,
trpzApConfServProfWebPortalLogoutUrl,
trpzApConfServProfKeepInitialVlanEnabled,
trpzApConfServProfMeshModeEnabled,
trpzApConfServProfBridgingEnabled,
trpzApConfServProfLoadBalanceExemptEnabled
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Service Profile configuration info in releases 7.5 to 7.6.
Replaced by trpzApConfServiceProfileTableGroupRev3."
::= { trpzApConfigGroups 10 }
trpzApConfApConfigLldpGroup OBJECT-GROUP
OBJECTS {
trpzApConfApConfigLldpMode,
trpzApConfApConfigLldpMedEnabled,
trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected,
trpzApConfApConfigLldpMedInventoryTlvSelected
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
AP LLDP Configuration info in releases 7.5 and greater."
::= { trpzApConfigGroups 11 }
trpzApConfApConfigTunnelGroup OBJECT-GROUP
OBJECTS {
trpzApConfApConfigApTunnelEnabled
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
AP to AP tunnel Configuration info in releases 7.5 and greater."
::= { trpzApConfigGroups 12 }
trpzApConfApConfigRemoteApGroup OBJECT-GROUP
OBJECTS {
trpzApConfApConfigDataSecurityEnabled,
trpzApConfApConfigWanOutageModeEnabled,
trpzApConfApConfigWanOutageExtendedTimeout,
trpzApConfApConfigWanOutageEvaluationPeriod
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
remote AP related Configuration info in releases 7.5 and greater."
::= { trpzApConfigGroups 13 }
trpzApConfRadioProfileRFSpectralScanGroup OBJECT-GROUP
OBJECTS {
trpzApConfRadioProfRFSpectralScanModeEnabled,
trpzApConfRadioProfRFSpectralScanPriority
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Profile RF Spectral Scanning configuration info
in releases 7.5 to 8.0.
Replaced by trpzApConfRadioProfileRFSpectralScanGroupRev2."
::= { trpzApConfigGroups 14 }
trpzApConfApConfigTableGroupRev2 OBJECT-GROUP
OBJECTS {
trpzApConfApConfigApAttachType,
trpzApConfApConfigPhysPortNum,
trpzApConfApConfigApSerialNum,
trpzApConfApConfigApModelName,
trpzApConfApConfigFingerprint,
trpzApConfApConfigBias,
trpzApConfApConfigApTimeout,
trpzApConfApConfigApName,
trpzApConfApConfigContact,
trpzApConfApConfigLocation,
trpzApConfApConfigBlinkEnabled,
trpzApConfApConfigForceImageDownloadEnabled,
trpzApConfApConfigFirmwareUpgradeEnabled,
trpzApConfApConfigLocalSwitchingEnabled,
trpzApConfApConfigPowerMode,
trpzApConfApConfigLedMode,
trpzApConfApConfigDescription,
trpzApConfApConfigRemoteSiteName,
trpzApConfApConfigPathMtu,
trpzApConfApConfigHighLatencyModeEnabled
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
AP Configuration info in releases 7.7 to 8.0.
Replaced by trpzApConfApConfigTableGroupRev3."
::= { trpzApConfigGroups 15 }
trpzApConfSnoopFilterTableGroupRev2 OBJECT-GROUP
OBJECTS {
trpzApConfSnoopFilterEnabled,
trpzApConfSnoopFilterObserverAddrType,
trpzApConfSnoopFilterObserverAddr
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Snoop Filter configuration info in releases 7.7 and greater."
::= { trpzApConfigGroups 16 }
trpzApConfSnoopObserverTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfSnoopObserverSnapLength,
trpzApConfSnoopObserverInterval,
trpzApConfSnoopObserverTxMode
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Snoop Observer configuration info in releases 7.7 and greater."
::= { trpzApConfigGroups 17 }
trpzApConfRadioSnoopFilterTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRadioSnoopFilterRowStatus
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
info about the associations of Snoop Filters with
AP Radios in releases 7.7 and greater."
::= { trpzApConfigGroups 18 }
trpzApConfServiceProfileTableGroupRev3 OBJECT-GROUP
OBJECTS {
trpzApConfServProfSsidType,
trpzApConfServProfBeaconEnabled,
trpzApConfServProf11naMode,
trpzApConfServProf11ngMode,
trpzApConfServProf11nShortGuardIntervalEnabled,
trpzApConfServProf11nFrameAggregation,
trpzApConfServProf11nMsduMaxLength,
trpzApConfServProf11nMpduMaxLength,
trpzApConfServProfAuthFallthru,
trpzApConfServProfWebAAAForm,
trpzApConfServProfWebPortalLogoutForm,
trpzApConfServProfSharedKeyAuthEnabled,
trpzApConfServProfWpaIeEnabled,
trpzApConfServProfWpaIeCipherTkipEnabled,
trpzApConfServProfWpaIeCipherCcmpEnabled,
trpzApConfServProfWpaIeAuthDot1xEnabled,
trpzApConfServProfWpaIeAuthPskEnabled,
trpzApConfServProfRsnIeEnabled,
trpzApConfServProfRsnIeCipherTkipEnabled,
trpzApConfServProfRsnIeCipherCcmpEnabled,
trpzApConfServProfRsnIeAuthDot1xEnabled,
trpzApConfServProfRsnIeAuthPskEnabled,
trpzApConfServProfTkipMicCountermeasuresTime,
trpzApConfServProfMaxBandwidthKbps,
trpzApConfServProfCacMode,
trpzApConfServProfCacSessCount,
trpzApConfServProfUserIdleTimeout,
trpzApConfServProfIdleClientProbingEnabled,
trpzApConfServProfShortRetryCount,
trpzApConfServProfLongRetryCount,
trpzApConfServProfProxyArpEnabled,
trpzApConfServProfDhcpRestrictEnabled,
trpzApConfServProfNoBroadcastEnabled,
trpzApConfServProfSygateOnDemandEnabled,
trpzApConfServProfEnforceChecksEnabled,
trpzApConfServProfSodaRemediationAcl,
trpzApConfServProfSodaSuccessPage,
trpzApConfServProfSodaFailurePage,
trpzApConfServProfSodaLogoutPage,
trpzApConfServProfSodaAgentDirectory,
trpzApConfServProfWebPortalSessionTimeout,
trpzApConfServProfWebPortalAcl,
trpzApConfServProfWebPortalLogoutEnabled,
trpzApConfServProfWebPortalLogoutUrl,
trpzApConfServProfKeepInitialVlanEnabled,
trpzApConfServProfMeshModeEnabled,
trpzApConfServProfBridgingEnabled,
trpzApConfServProfLoadBalanceExemptEnabled,
trpzApConfServProfM2UConversionEnabled,
trpzApConfServProfBackupSsidMode,
trpzApConfServProfBackupSsidTimeout,
trpzApConfServProfBackupSsidKeepClients
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Service Profile configuration info in releases 7.7 and greater."
::= { trpzApConfigGroups 19 }
trpzApConfRemoteSiteTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRemoteSiteCountryCode,
trpzApConfRemoteSitePathMtu,
trpzApConfRemoteSiteBackupSsidsEnabled,
trpzApConfRemoteSiteLogServerEnabled,
trpzApConfRemoteSiteLogServerAddrType,
trpzApConfRemoteSiteLogServerAddr,
trpzApConfRemoteSiteLogServerPort,
trpzApConfRemoteSiteLogServerSeverity
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Remote Site configuration info in releases 7.7 to 8.0.
Replaced by trpzApConfRemoteSiteTableGroupRev2."
::= { trpzApConfigGroups 20 }
trpzApConfRadioProfileTableGroupRev2 OBJECT-GROUP
OBJECTS {
trpzApConfRadioProfBeaconInterval,
trpzApConfRadioProfDtimInterval,
trpzApConfRadioProfChannelWidth11na,
trpzApConfRadioProfMaxTxLifetime,
trpzApConfRadioProfMaxRxLifetime,
trpzApConfRadioProfRtsThreshold,
trpzApConfRadioProfFragThreshold,
trpzApConfRadioProfLongXmitPreambleEnabled,
trpzApConfRadioProfCountermeasuresMode,
trpzApConfRadioProfRFScanMode,
trpzApConfRadioProfRFScanChannelScope,
trpzApConfRadioProfRFScanCTSEnabled,
trpzApConfRadioProfAutoTunePowerEnabled,
trpzApConfRadioProfAutoTunePowerRampInterval,
trpzApConfRadioProfAutoTunePowerChangeInterval,
trpzApConfRadioProfFairQueuingEnabled,
trpzApConfRadioProfCacBackgroundACMandatory,
trpzApConfRadioProfCacBackgroundMaxUtilization,
trpzApConfRadioProfCacBackgroundPolicingEnabled,
trpzApConfRadioProfCacBestEffortACMandatory,
trpzApConfRadioProfCacBestEffortMaxUtilization,
trpzApConfRadioProfCacBestEffortPolicingEnabled,
trpzApConfRadioProfCacVideoACMandatory,
trpzApConfRadioProfCacVideoMaxUtilization,
trpzApConfRadioProfCacVideoPolicingEnabled,
trpzApConfRadioProfCacVoiceACMandatory,
trpzApConfRadioProfCacVoiceMaxUtilization,
trpzApConfRadioProfCacVoicePolicingEnabled,
trpzApConfRadioProfRfidTagEnabled,
trpzApConfRadioProfWmmPowerSaveEnabled,
trpzApConfRadioProfRateEnforcementEnabled,
trpzApConfRadioProfDfsChannelsEnabled
}
STATUS obsolete
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Profile configuration info in release 8.0.
Replaced by trpzApConfRadioProfile32TableGroup."
::= { trpzApConfigGroups 21 }
trpzApConfApConfigTableGroupRev3 OBJECT-GROUP
OBJECTS {
trpzApConfApConfigApAttachType,
trpzApConfApConfigPhysPortNum,
trpzApConfApConfigApSerialNum,
trpzApConfApConfigApModelName,
trpzApConfApConfigFingerprint,
trpzApConfApConfigBias,
trpzApConfApConfigApTimeout,
trpzApConfApConfigContact,
trpzApConfApConfigLocation,
trpzApConfApConfigBlinkEnabled,
trpzApConfApConfigForceImageDownloadEnabled,
trpzApConfApConfigFirmwareUpgradeEnabled,
trpzApConfApConfigLocalSwitchingEnabled,
trpzApConfApConfigPowerMode,
trpzApConfApConfigLedMode,
trpzApConfApConfigDescription,
trpzApConfApConfigRemoteSiteName,
trpzApConfApConfigPathMtu,
trpzApConfApConfigHighLatencyModeEnabled,
trpzApConfApConfigApName2,
trpzApConfApConfigCacheConfigEnabled
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
AP Configuration info in releases 9.0 and greater."
::= { trpzApConfigGroups 22 }
trpzApConfRadioConfigTableGroupRev2 OBJECT-GROUP
OBJECTS {
trpzApConfRadioConfigRadioType,
trpzApConfRadioConfigRadioMode,
trpzApConfRadioConfigChannel,
trpzApConfRadioConfigTxPower,
trpzApConfRadioConfigAntennaType,
trpzApConfRadioConfigAntennaLocation,
trpzApConfRadioConfigLoadBalancingEnabled,
trpzApConfRadioConfigLoadBalancingGroup,
trpzApConfRadioConfigLoadRebalancingEnabled,
trpzApConfRadioConfigRadioProfileName2
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Configuration info in releases 9.0 and greater."
::= { trpzApConfigGroups 23 }
trpzApConfApTemplateRadioConfigTableGroupRev2 OBJECT-GROUP
OBJECTS {
trpzApConfApTemRadioConfRadioMode,
trpzApConfApTemRadioConfLoadBalancingEnabled,
trpzApConfApTemRadioConfLoadBalancingGroup,
trpzApConfApTemRadioConfLoadRebalancingEnabled,
trpzApConfApTemRadioConfRadioProfileName2
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Configuration Template info in releases 9.0 and greater."
::= { trpzApConfigGroups 24 }
trpzApConfRadioProfile32TableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRadioProf32BeaconInterval,
trpzApConfRadioProf32DtimInterval,
trpzApConfRadioProf32ChannelWidth11na,
trpzApConfRadioProf32MaxTxLifetime,
trpzApConfRadioProf32MaxRxLifetime,
trpzApConfRadioProf32RtsThreshold,
trpzApConfRadioProf32FragThreshold,
trpzApConfRadioProf32LongXmitPreambleEnabled,
trpzApConfRadioProf32CountermeasuresMode,
trpzApConfRadioProf32RFScanMode,
trpzApConfRadioProf32RFScanChannelScope,
trpzApConfRadioProf32RFScanCTSEnabled,
trpzApConfRadioProf32AutoTunePowerEnabled,
trpzApConfRadioProf32AutoTunePowerRampInterval,
trpzApConfRadioProf32AutoTunePowerChangeInterval,
trpzApConfRadioProf32FairQueuingEnabled,
trpzApConfRadioProf32CacBackgroundACMandatory,
trpzApConfRadioProf32CacBackgroundMaxUtilization,
trpzApConfRadioProf32CacBackgroundPolicingEnabled,
trpzApConfRadioProf32CacBestEffortACMandatory,
trpzApConfRadioProf32CacBestEffortMaxUtilization,
trpzApConfRadioProf32CacBestEffortPolicingEnabled,
trpzApConfRadioProf32CacVideoACMandatory,
trpzApConfRadioProf32CacVideoMaxUtilization,
trpzApConfRadioProf32CacVideoPolicingEnabled,
trpzApConfRadioProf32CacVoiceACMandatory,
trpzApConfRadioProf32CacVoiceMaxUtilization,
trpzApConfRadioProf32CacVoicePolicingEnabled,
trpzApConfRadioProf32RfidTagEnabled,
trpzApConfRadioProf32WmmPowerSaveEnabled,
trpzApConfRadioProf32RateEnforcementEnabled,
trpzApConfRadioProf32DfsChannelsEnabled
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Profile configuration info in releases 9.0 and greater."
::= { trpzApConfigGroups 25 }
trpzApConfRadioProfileRFSpectralScanGroupRev2 OBJECT-GROUP
OBJECTS {
trpzApConfRadioProf32RFSpectralScanModeEnabled,
trpzApConfRadioProf32RFSpectralScanPriority
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Radio Profile RF Spectral Scanning configuration info
in releases 9.0 and greater."
::= { trpzApConfigGroups 26 }
trpzApConfRadioProf32ServiceProfileTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRp32ServpRowStatus
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Service Profiles associated to each Radio Profile
in releases 9.0 and greater."
::= { trpzApConfigGroups 27 }
trpzApConfRadioProf32SnoopFilterTableGroup OBJECT-GROUP
OBJECTS {
trpzApConfRp32SnoopfRowStatus
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Snoop Filters associated to each Radio Profile
in releases 9.0 and greater."
::= { trpzApConfigGroups 28 }
trpzApConfRemoteSiteTableGroupRev2 OBJECT-GROUP
OBJECTS {
trpzApConfRemoteSiteCountryCode,
trpzApConfRemoteSitePathMtu,
trpzApConfRemoteSiteBackupSsidsEnabled,
trpzApConfRemoteSiteLogServerEnabled,
trpzApConfRemoteSiteLogServerAddrType,
trpzApConfRemoteSiteLogServerAddr,
trpzApConfRemoteSiteLogServerPort,
trpzApConfRemoteSiteLogServerSeverity,
trpzApConfRemoteSiteAcPollingEnabled,
trpzApConfRemoteSiteRadiusServerGroupName,
trpzApConfRemoteSiteRadiusDeadtime,
trpzApConfRemoteSiteRadiusTimeout,
trpzApConfRemoteSiteRadiusRetransmit,
trpzApConfRemoteSiteRadiusNasIdType
}
STATUS current
DESCRIPTION
"Group of columnar objects implemented to provide
Remote Site configuration info in releases 9.0 and greater."
::= { trpzApConfigGroups 29 }
END
View Git Blame Copy Permalink