790 lines
31 KiB
Plaintext
790 lines
31 KiB
Plaintext
TPLINK-IGMPSNOOPING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
OBJECT-TYPE,MODULE-IDENTITY,IpAddress
|
|
FROM SNMPv2-SMI
|
|
TPRowStatus
|
|
FROM TPLINK-TC-MIB
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
tplinkMgmt
|
|
FROM TPLINK-MIB;
|
|
|
|
|
|
tplinkIgmpSnoopingMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201212141432Z"
|
|
ORGANIZATION "TPLINK"
|
|
CONTACT-INFO "www.tplink.com"
|
|
DESCRIPTION
|
|
"Private MIB for igmpSnooping manage."
|
|
REVISION "201212141432Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { tplinkMgmt 25 }
|
|
|
|
tplinkIgmpSnoopingMIBObjects OBJECT IDENTIFIER ::= {tplinkIgmpSnoopingMIB 1}
|
|
tplinkIgmpSnoopingNotifications OBJECT IDENTIFIER ::= {tplinkIgmpSnoopingMIB 2}
|
|
|
|
tpIgmpSnooping OBJECT IDENTIFIER ::= {tplinkIgmpSnoopingMIBObjects 1}
|
|
tpIgmpFilter OBJECT IDENTIFIER ::= {tplinkIgmpSnoopingMIBObjects 2}
|
|
tpIgmpAuth OBJECT IDENTIFIER ::= {tplinkIgmpSnoopingMIBObjects 3}
|
|
tpIgmpPacketStatistic OBJECT IDENTIFIER ::= {tplinkIgmpSnoopingMIBObjects 4}
|
|
tpIgmpMultigroup OBJECT IDENTIFIER ::= {tplinkIgmpSnoopingMIBObjects 5}
|
|
tpIgmpStaticMultigroup OBJECT IDENTIFIER ::= {tplinkIgmpSnoopingMIBObjects 6}
|
|
|
|
--**************
|
|
--IGMP SNOOPING
|
|
--**************
|
|
tpIgmpSnoopingGlobalConfig OBJECT IDENTIFIER ::= {tpIgmpSnooping 1}
|
|
|
|
tpIgmpSnoopingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --disable
|
|
enable(1) --enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable IGMP Snooping function globally on the Switch.
|
|
0. disable
|
|
1. enable"
|
|
::= { tpIgmpSnoopingGlobalConfig 1 }
|
|
|
|
tpIgmpSnoopingVersion OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
igmpv1(0), --V1
|
|
igmpv2(1), --V2
|
|
igmpv3(2) --V3
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the operation for the switch to process config the igmp version.
|
|
0. IGMPv1
|
|
1. IGMPv2
|
|
2. IGMPv3"
|
|
::= { tpIgmpSnoopingGlobalConfig 2 }
|
|
|
|
tpUnknownMulticastPacket OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
forward(0), --forward
|
|
discard(1) --discard
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the operation for the switch to process unknown multicast.
|
|
0. forward
|
|
1. discard"
|
|
::= { tpIgmpSnoopingGlobalConfig 3 }
|
|
|
|
tpIgmpHeaderValidation OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --disable
|
|
enable(1) --enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable IGMP Snooping header validation on the Switch.
|
|
0. disable
|
|
1. enable"
|
|
::= { tpIgmpSnoopingGlobalConfig 4 }
|
|
|
|
tpIgmpPortConfig OBJECT IDENTIFIER ::= {tpIgmpSnooping 2}
|
|
|
|
|
|
tpIgmpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPIGMPPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP Snooping (Internet Group Management Protocol Snooping)
|
|
is a multicast control mechanism running on Layer 2 switch.
|
|
It can effectively prevent multicast groups being broadcasted
|
|
in the network."
|
|
::= { tpIgmpPortConfig 1 }
|
|
|
|
tpIgmpPortEntry OBJECT-TYPE
|
|
SYNTAX TPIGMPPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of the information of port configure."
|
|
INDEX { ifIndex }
|
|
::= { tpIgmpPortTable 1 }
|
|
|
|
TPIGMPPORTENTRY ::=
|
|
SEQUENCE {
|
|
tpIgmpSnoopingPortEnable
|
|
INTEGER,
|
|
tpIgmpFastLeavePortEnable
|
|
INTEGER,
|
|
tpIgmpPortLag
|
|
OCTET STRING
|
|
|
|
}
|
|
tpIgmpSnoopingPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable IGMP Snooping for the desired port.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpIgmpPortEntry 2 }
|
|
|
|
tpIgmpFastLeavePortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable Fast Leave feature for the desired port.
|
|
If Fast Leave is enabled for a port, the Switch will immediately
|
|
remove this port from the multicast group upon receiving IGMP
|
|
leave messages.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpIgmpPortEntry 3 }
|
|
|
|
tpIgmpPortLag OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the LAG number which the port belongs to."
|
|
::= { tpIgmpPortEntry 4 }
|
|
|
|
|
|
tpIgmpVlanConfig OBJECT IDENTIFIER ::= {tpIgmpSnooping 3}
|
|
|
|
tpIgmpVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPIGMPVLANENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast groups established by IGMP Snooping are based on VLANs.
|
|
You can configure different IGMP parameters for different VLANs.
|
|
"
|
|
::= { tpIgmpVlanConfig 1 }
|
|
|
|
tpIgmpVlanEntry OBJECT-TYPE
|
|
SYNTAX TPIGMPVLANENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of the information of igmpsnooping."
|
|
INDEX {tpIgmpVlanId}
|
|
::= { tpIgmpVlanTable 1 }
|
|
|
|
TPIGMPVLANENTRY ::=
|
|
SEQUENCE {
|
|
tpIgmpVlanId
|
|
INTEGER,
|
|
tpIgmpVlanEnable
|
|
INTEGER,
|
|
tpIgmpVlanFastLeave
|
|
INTEGER,
|
|
tpIgmpVlanReportSuppression
|
|
INTEGER,
|
|
tpIgmpRouterTime
|
|
INTEGER,
|
|
tpIgmpMemberTime
|
|
INTEGER,
|
|
tpIgmpLeaveTime
|
|
INTEGER,
|
|
tpIgmpRouterPort
|
|
OCTET STRING,
|
|
tpIgmpForbiddenRouterPort
|
|
OCTET STRING,
|
|
tpIgmpQueryEnable
|
|
INTEGER,
|
|
tpIgmpQueryInterval
|
|
INTEGER,
|
|
tpIgmpQueryMaxResponseTime
|
|
INTEGER,
|
|
tpIgmpQueryGeneralSrcIp
|
|
IpAddress,
|
|
tpIgmpQueryLastMemberCount
|
|
INTEGER,
|
|
tpIgmpQueryLastMemberInterval
|
|
INTEGER,
|
|
tpIgmpVlanStatus
|
|
TPRowStatus
|
|
}
|
|
|
|
tpIgmpVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the VLAN ID to enable IGMP Snooping for the desired VLAN,1-4094."
|
|
::= { tpIgmpVlanEntry 1 }
|
|
|
|
tpIgmpVlanEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable IGMP Snooping for the desired vlan.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpIgmpVlanEntry 2 }
|
|
|
|
tpIgmpVlanFastLeave OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable Fast Leave feature for the desired vlan.
|
|
If Fast Leave is enabled for a vlan, the Switch will immediately
|
|
remove this port from the multicast group upon receiving IGMP
|
|
leave messages.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpIgmpVlanEntry 3 }
|
|
|
|
tpIgmpVlanReportSuppression OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable IGMP Snooping report suppression function globally on the Switch.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpIgmpVlanEntry 4 }
|
|
|
|
tpIgmpRouterTime OBJECT-TYPE
|
|
SYNTAX INTEGER(60..600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the aging time of the router port. Within this time,
|
|
if the switch don't receive IGMP query message from the router port,
|
|
it will consider this port is not a router port any more,0,60-600 second."
|
|
::= { tpIgmpVlanEntry 5 }
|
|
|
|
tpIgmpMemberTime OBJECT-TYPE
|
|
SYNTAX INTEGER(60..600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the aging time of the member port. Within this time,
|
|
if the switch don't receive IGMP report message from the member port,
|
|
it will consider this port is not a member port any more,0,60-600 second."
|
|
::= { tpIgmpVlanEntry 6}
|
|
|
|
tpIgmpLeaveTime OBJECT-TYPE
|
|
SYNTAX INTEGER(1..30)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the leave time for the VLAN.
|
|
When the switch receives a leave message from a port to leave a multicast group,
|
|
it will wait for a leave time before removing the port from the multicast group."
|
|
::= { tpIgmpVlanEntry 7}
|
|
|
|
tpIgmpRouterPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config the static router ports which are mainly used in the network with
|
|
stable topology."
|
|
::= { tpIgmpVlanEntry 8 }
|
|
|
|
tpIgmpForbiddenRouterPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config the forbidden router ports which are mainly used to forbidden
|
|
specified ports to become router ports."
|
|
::= { tpIgmpVlanEntry 9 }
|
|
|
|
tpIgmpQueryEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable IGMP Querier.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpIgmpVlanEntry 10 }
|
|
|
|
tpIgmpQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(10..300)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds."
|
|
::= { tpIgmpVlanEntry 11 }
|
|
|
|
tpIgmpQueryMaxResponseTime OBJECT-TYPE
|
|
SYNTAX INTEGER(1..25)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the value of Maximum Response Time field of the Query message. The host is expected to response to an IGMP general query within this time. The time is ranging from 1 to 25 seconds."
|
|
::= { tpIgmpVlanEntry 12}
|
|
|
|
tpIgmpQueryGeneralSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the General Query Message source IP address."
|
|
::= { tpIgmpVlanEntry 13}
|
|
|
|
tpIgmpQueryLastMemberCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the Last Listener Query numbers. When the multicast group has no more member ports,
|
|
it will send this numbers of Specific Query Message to check whether there is another member.
|
|
It is ranging from 1 to 5."
|
|
::= { tpIgmpVlanEntry 14}
|
|
|
|
tpIgmpQueryLastMemberInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(1..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the Last Listener Query interval time. When the multicast group has no more member ports,
|
|
it will send the Specific Query Message with this interval time to check whether there is another
|
|
member. The interval is ranging from 1 to 5 seconds."
|
|
::= { tpIgmpVlanEntry 15}
|
|
|
|
tpIgmpVlanStatus OBJECT-TYPE
|
|
SYNTAX TPRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the following two values are states:
|
|
these values may be read or written
|
|
active(1),
|
|
notInService(2),
|
|
|
|
the following value is a state:
|
|
this value may be read, but not written
|
|
notReady(3),
|
|
|
|
the following three values are
|
|
actions: these values may be written,
|
|
but are never read
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)"
|
|
::= { tpIgmpVlanEntry 16 }
|
|
|
|
--**************
|
|
--IGMP FILTER
|
|
--**************
|
|
|
|
tpIgmpPortFilterConfig OBJECT IDENTIFIER ::= { tpIgmpFilter 1 }
|
|
tpIgmpFilterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPIGMPFILTERPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the switch receives IGMP report message, it examines
|
|
the multicast filtering IP ID configured on the access port
|
|
to determine if the port can join the multicast group.
|
|
If the multicast IP is not filtered, the switch will add
|
|
the port to the forward port list of the multicast group.
|
|
Otherwise, the switch will drop the IGMP report message.
|
|
In that way, you can control the multicast groups that users
|
|
can access."
|
|
::= { tpIgmpPortFilterConfig 1 }
|
|
|
|
tpIgmpFilterPortEntry OBJECT-TYPE
|
|
SYNTAX TPIGMPFILTERPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of the information of a port param."
|
|
INDEX { ifIndex }
|
|
::= { tpIgmpFilterPortTable 1 }
|
|
|
|
TPIGMPFILTERPORTENTRY ::=
|
|
SEQUENCE {
|
|
tpIgmpFilterMaxGroup
|
|
INTEGER,
|
|
tpIgmpFilterMaxGroupAction
|
|
INTEGER,
|
|
tpIgmpFilterBindAddrId
|
|
OCTET STRING,
|
|
tpIgmpFilterPortLag
|
|
OCTET STRING
|
|
|
|
}
|
|
|
|
tpIgmpFilterMaxGroup OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the maximum number of multicast groups to prevent some
|
|
ports taking up too much bandwidth."
|
|
::= { tpIgmpFilterPortEntry 2 }
|
|
|
|
tpIgmpFilterMaxGroupAction OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
drop(0), --Drop
|
|
replace(1) --Replace
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The policy should be taken when the number of multicast group
|
|
a port has joined reach the maximum.
|
|
0.Drop: drop the successive report packet, and this port can
|
|
not join any other multicast group.
|
|
1.Replace: when the port joins another new multicast group,it
|
|
will quit the existing multicast group randomly."
|
|
::= { tpIgmpFilterPortEntry 3 }
|
|
|
|
tpIgmpFilterBindAddrId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the profile ID the port will be bound to. Only one profile
|
|
can be bound to each port."
|
|
::= { tpIgmpFilterPortEntry 4 }
|
|
|
|
tpIgmpFilterPortLag OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the LAG number which the port belongs to."
|
|
::= { tpIgmpFilterPortEntry 5 }
|
|
|
|
--********************
|
|
--IGMP Authentication
|
|
--********************
|
|
|
|
tpIgmpPortAuthConfig OBJECT IDENTIFIER ::= { tpIgmpAuth 1 }
|
|
tpIgmpAuthPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPIGMPAUTHPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IGMP Authentication can control the access of multicast packets."
|
|
::= { tpIgmpPortAuthConfig 1 }
|
|
|
|
tpIgmpAuthPortEntry OBJECT-TYPE
|
|
SYNTAX TPIGMPAUTHPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of the information of port authentication configure."
|
|
INDEX { ifIndex }
|
|
::= { tpIgmpAuthPortTable 1 }
|
|
|
|
TPIGMPAUTHPORTENTRY ::=
|
|
SEQUENCE {
|
|
tpIgmpAuthEnable
|
|
INTEGER,
|
|
tpIgmpAuthPortLag
|
|
OCTET STRING
|
|
}
|
|
|
|
tpIgmpAuthEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable IGMP Authentication for the desired port.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpIgmpAuthPortEntry 2 }
|
|
|
|
tpIgmpAuthPortLag OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the LAG number which the port belongs to."
|
|
::= { tpIgmpAuthPortEntry 3 }
|
|
|
|
tpIgmpGlobalAuthAccountConfig OBJECT IDENTIFIER ::= {tpIgmpAuth 2}
|
|
tpIgmpGlobalAuthAccountConfigEable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0. disable
|
|
1. enable
|
|
Enable/Disable the IGMP Authentication Accounting."
|
|
::= { tpIgmpGlobalAuthAccountConfig 1 }
|
|
|
|
--**************
|
|
--PACKET STAT
|
|
--**************
|
|
tpIgmpPktStat OBJECT IDENTIFIER ::= { tpIgmpPacketStatistic 1 }
|
|
|
|
tpIgmpPktStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPIGMPPKTSTATENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of multicast statistic Table."
|
|
::= { tpIgmpPktStat 1 }
|
|
|
|
tpIgmpPktStatEntry OBJECT-TYPE
|
|
SYNTAX TPIGMPPKTSTATENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of multicast packet statistics over each port."
|
|
INDEX { ifIndex }
|
|
::= { tpIgmpPktStatTable 1 }
|
|
|
|
TPIGMPPKTSTATENTRY ::=
|
|
SEQUENCE {
|
|
tpIgmpQueryPktStat
|
|
INTEGER,
|
|
tpIgmpReportV1PktStat
|
|
INTEGER,
|
|
tpIgmpReportV2PktStat
|
|
INTEGER,
|
|
tpIgmpReportV3PktStat
|
|
INTEGER,
|
|
tpIgmpLeavePktStat
|
|
INTEGER,
|
|
tpIgmpErrorPktStat
|
|
INTEGER
|
|
}
|
|
|
|
tpIgmpQueryPktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of query packets the port received."
|
|
::= { tpIgmpPktStatEntry 2 }
|
|
|
|
tpIgmpReportV1PktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of IGMPv1 report packets the port received."
|
|
::= { tpIgmpPktStatEntry 3 }
|
|
|
|
tpIgmpReportV2PktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of IGMPv2 report packets the port received."
|
|
::= { tpIgmpPktStatEntry 4 }
|
|
|
|
tpIgmpReportV3PktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of IGMPv3 report packets the port received."
|
|
::= { tpIgmpPktStatEntry 5 }
|
|
|
|
tpIgmpLeavePktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of leave packets the port received."
|
|
::= { tpIgmpPktStatEntry 6 }
|
|
|
|
tpIgmpErrorPktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of error packets the port received."
|
|
::= { tpIgmpPktStatEntry 7 }
|
|
|
|
tpIpIgmpPktStatClear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
commit(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"igmp packet statistic clear."
|
|
::= { tpIgmpPktStat 2 }
|
|
|
|
--**************
|
|
--GROUP SHOW
|
|
--**************
|
|
tpIgmpMulticastGroups OBJECT IDENTIFIER ::= { tpIgmpMultigroup 1 }
|
|
|
|
tpIgmpMulticastGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPIGMPMULTICASTGROUPENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of multicast groups Table."
|
|
::= { tpIgmpMulticastGroups 1 }
|
|
|
|
tpIgmpMulticastGroupEntry OBJECT-TYPE
|
|
SYNTAX TPIGMPMULTICASTGROUPENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of multicast packet statistics over each port."
|
|
INDEX { tpIgmpMulticastIP , tpIgmpVlanID}
|
|
::= { tpIgmpMulticastGroupTable 1 }
|
|
|
|
TPIGMPMULTICASTGROUPENTRY ::=
|
|
SEQUENCE {
|
|
tpIgmpMulticastIP
|
|
IpAddress,
|
|
tpIgmpVlanID
|
|
INTEGER,
|
|
tpIgmpForwardPorts
|
|
OCTET STRING,
|
|
tpIgmpGrouptype
|
|
INTEGER
|
|
}
|
|
|
|
tpIgmpMulticastIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the multicast IP address."
|
|
::= { tpIgmpMulticastGroupEntry 1 }
|
|
|
|
tpIgmpVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the VLAN ID."
|
|
::= { tpIgmpMulticastGroupEntry 2 }
|
|
|
|
tpIgmpForwardPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the forward ports of multicast group."
|
|
::= { tpIgmpMulticastGroupEntry 3 }
|
|
|
|
tpIgmpGrouptype OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
static(0),
|
|
dynamic(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the type of multicast group."
|
|
::= { tpIgmpMulticastGroupEntry 4 }
|
|
--**************
|
|
--STATIC GROUP
|
|
--**************
|
|
tpIgmpMulticastStaticGroups OBJECT IDENTIFIER ::= { tpIgmpStaticMultigroup 1 }
|
|
|
|
tpIgmpMulticastStaticGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPIGMPMULTICASTSTATICGROUPENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of multicast groups Table."
|
|
::= { tpIgmpMulticastStaticGroups 1 }
|
|
|
|
tpIgmpMulticastStaticGroupEntry OBJECT-TYPE
|
|
SYNTAX TPIGMPMULTICASTSTATICGROUPENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of multicast packet statistics over each port."
|
|
INDEX { tpIgmpStaticMulticastIP , tpIgmpStaticVlanID }
|
|
::= { tpIgmpMulticastStaticGroupTable 1 }
|
|
|
|
TPIGMPMULTICASTSTATICGROUPENTRY ::=
|
|
SEQUENCE {
|
|
tpIgmpStaticMulticastIP
|
|
IpAddress,
|
|
tpIgmpStaticVlanID
|
|
INTEGER,
|
|
tpIgmpStaticForwardPorts
|
|
OCTET STRING,
|
|
tpIgmpStaticGroupStatus
|
|
TPRowStatus
|
|
}
|
|
|
|
tpIgmpStaticMulticastIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast IP address."
|
|
::= { tpIgmpMulticastStaticGroupEntry 1 }
|
|
|
|
tpIgmpStaticVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID."
|
|
::= { tpIgmpMulticastStaticGroupEntry 2 }
|
|
|
|
tpIgmpStaticForwardPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..50))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forward ports of multicast group."
|
|
::= { tpIgmpMulticastStaticGroupEntry 3 }
|
|
|
|
tpIgmpStaticGroupStatus OBJECT-TYPE
|
|
SYNTAX TPRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The following values are states:
|
|
these values may be used as follow:
|
|
|
|
active(1),if the entry is being used.
|
|
notInService(2),destory the entry.
|
|
notReady(3),destory the entry.
|
|
createAndGo(4),not being used
|
|
createAndWait(5),creat a new entry
|
|
destroy(6),destory the entry."
|
|
::= { tpIgmpMulticastStaticGroupEntry 4 }
|
|
|
|
|
|
|
|
END |